|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$275.00 Shipping Condition: For parts or not working Location: Des Moines, United States Freight costs are an estimate only. As pictured.
Buy It Now
$435.00 Shipping Condition: Used Location: Hutto, United States See photos. What's in the box?.
Buy It Now
Condition: Used Location: Painesville, United States » We can run the drive for this mill upon request. » Bull and pinion gear - good condition. » Roller bearings, on short steel legs.
Buy It Now
Condition: For parts or not working Location: Schenectady, United States Model:ACM 5 EC. Note:The handling fee does not include freight costs. If there are multiple available for sale you may not receive the one photoed, but ... morethey are all in similar condition. Our facility includes a truck-height loading dock for convenience.
Buy It Now
$1200.00 Shipping Condition: Used Location: Randolph, United States Motor swapped and upgraded to 10 HP.
Buy It Now
Condition: Used Location: Painesville, United States » One(1) used Morehouse Stone Mill, stainless steel. » Model: B 1400. » All non-wetted parts are 304 stainless steel.
Buy It Now
$600.00 Shipping Condition: Used Location: Carnegie, United States GREERCO Model W250V-MYO Vertical In-Line Colloid Mill 2HP. Custom high-flow rotor. Includes funnel, Tee valve, and return line.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
Condition: Used Location: Boyers, United States We have for sale a used Netzsch LMA1 DCMS s/n 204-028 Type - 574-01 Horizontal Mill - 1 Liter Type LM High speed mill for fine grinding. It is 460 volt ... more3 phase 60 Hz. Comes as you see it. We purchased at a closed Valspar paint factory R&D Lab. We do not know its condition or when it was last used. Clean inside chamber. We can not power up as we do not have 460 Volt power. It is sold as is where is and as seen in the photos. You are welcome to come in and inspect. We can secure and load on a pallet. Thank you for looking. Mike Tenney - Tenney Equipment Company
Buy It Now
Condition: Used Location: Johnson City, United States Sturtevant Simpactor Gas Flue Pin Mill. Manufacturer: STURTEVANT. Type : PIN MILL. Maximum rotor speed: 4000 RPM.
Buy It Now
Condition: Seller refurbished Location: Trilla, United States California Pellet Mill. Model - Master pellet plant. Complete Pellet Mill System Master Plant. Complete plant system with bins, fan, cooler, screener, ... morecyclone, crumble roll.
Buy It Now
Condition: Used Location: Millwood, United States 3HP gearmotor drive (230/460V, 60Hz, 3ph). Agitators: 6"Ø heavy duty mixer shafts, helix-pitched adjustable paddles. Capacity: up to 1 ton per hour depending ... moreon product. Two-section cover with 6" X 10" flanged inlet.
Buy It Now
Condition: Used Location: Brookpark, United States DRAIS MANNHEIM #PML-H/V BEAD MILL. we can either use your account number or provide a rate quote. We can provide freight quotes.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
Condition: Used Location: Millersburg, United States Model No. 68743. Skid size is 50" long 40" wide 70" tall 1070 lbs. Part Number Type ID-20. We are dedicated to understanding the unique challenges and ... moreopportunities that each industry faces. It is neither inferred or implied that any item sold by Arrow Industrial is a product authorized or in any way connected with any manufacturers displayed on our pages.
6d 9h 44m 10s 0 bids
$2000.00 Now
$350.00 Shipping Condition: Seller refurbished Location: Marengo, United States Runs Great. $10,000 dollar machine for a steal. Bico Braun Pulverizer, high-quality laboratory mill with an 8" diameter disc grinder and a powerful 2 ... morehp, 3 phase motor. Great investment for any lab or facility in need of a reliable and efficient grinding machine. Purchase today and experience the exceptional performance this equipment has to offer.
Buy It Now
$14.00 Shipping Condition: New – Open box Location: Sainte Genevieve, United States For sale is a set of hammers - Hosokawa Micron Powder Systems - Part # M241585. I obtained from a Lime Co inventory reduction sale. These are new but ... moreold stock. Stored for several years in a parts pallet. Packaging is aged and hammers not well contained. Each package will have 15 of the larger width and 3 of the smaller width hammers.
Buy It Now
Condition: Used Location: Pawtucket, United States Milling cutter. Gold Machinery Group. Drilling capacity: 32mm(11/4"). Swing: 405mm (15-7/8"). We’re conveniently located on the East Coast between Boston ... moreand New York. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
Condition: Used Location: Johnson City, United States Model No : 42214DTF. Reference Number : #67205. Manufacturer: JACOBSON. W/ Lincoln 75 HP 1800 RPM motor. RPM : 1800.
Buy It Now
Condition: Used Location: Monroe Township, United States Rotor/Stator: 316 stainless steel Rotor and Stator; serrated surface finish (R-2, S-2). Flow: 150-600 GPH under pressurized feed. enclosure mounted to ... moreupright on skid. Bought in 2010. Used for food product testing.
Buy It Now
$150.00 Shipping Condition: Used Location: Des Moines, United States
Buy It Now
Condition: Used Location: Millwood, United States 25HP v-belt drive (460V, 60Hz, 3ph.). 16" X 24" extended height inlet hopper with safety perforated plate. Previously used for gelatine powder. ITEM #: ... more20191. Stator Knife Rows: Qty.
Buy It Now
Condition: Used Location: Boyers, United States We have for sale a used Kady Mill - Model L s/n 724 It is 208/230/460 3 Phase 60 Cy. Explosion proof. Nice little lab mill. Probably have to ship on a ... moresmall pallet. Buyer pays for shipping. Thank you for looking. Mike Tenney - Tenney Equipment Company
Buy It Now
Free Shipping Condition: Used Location: Paulsboro, United States Wood Plunger is included. Excellent pre-owned condition with no notable signs of wear. No dents or dings or scratches.
Buy It Now
$150.00 Shipping Condition: Used Location: Ames, United States PN: Nr.910672. Unit has been previously used. Plastic cover has been broken but unit is still in good condition and works properly. Actual Unit Shown,HUGE ... moreSAVINGS.
Buy It Now
$20.00 Shipping Condition: New Location: Chino, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
Free Shipping Condition: New Location: Chino, United States Mill Plant Machine FZ102 Grinder Micro Plant Grinding Machine110V 1400r/m TOP. The machine uses a high-speed rotating knife and fixed knife to form a ... morecutting surface for crushing, which generates little heat.
Buy It Now
$25.27 Shipping Condition: Used Location: Tempe, United States SKU J139 LOC:106D.
Buy It Now
Condition: Used Location: Millersburg, United States NPK Type PJM-ID-20-2 No. I-09084 Super Sonic Jet Mill Stainless. I-09084 Super Sonic Jet Mill Stainless NPK. Skid size is 58" long 40" wide 70" tall 1450 ... morelbs. Part Number Type PJM-ID-20-2. We are dedicated to understanding the unique challenges and opportunities that each industry faces.
Buy It Now
Condition: Used Location: Suwanee, United States (107x53x64,7600). (bcd - suw yrd). We appreciate your consideration!
Buy It Now
$150.00 Shipping Condition: Used Location: Des Moines, United States
Buy It Now
Condition: Used Location: Phoenix, United States Lab Jar Roll Mill with two ceramic jars 220V variable speed.
Buy It Now
$450.00 Shipping Condition: Used Location: Greeley, United States Netzsch lab star mill, hazardous location wiring. Unable to test with power. Sold as is. Purchased from government storage liquidation please ask any ... morequestions, I’ll do my best to answer. (Cart not included) Thanks for looking. Shipping to business with dock or forklift will be $450 for the lower 48 only.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
$350.00 Shipping Condition: Used Location: Hayward, United States Model KM 4FG. Feed opening approximate 4" x 4". Includes Vacon X drive with 110V single phase power. Motor Electrical Specs 3 Phase, 60 Hz, 230/460V.
Buy It Now
Condition: Used Location: Millwood, United States
Buy It Now
Condition: Used Location: Akron, United States Mill was running up until September 2023. Both mills have modern triple pass drilled front rolls. Direct connected via Lufkin T720B 83.5 to 1 reducer. ... more300HP 600 volt AC motor with reduced voltage starter. Overhead blender included but not installed. Complete operational mill that had new bearings installed in 2019. 1.08 to 1 friction ratio on both mills. Ready to go.
Buy It Now
Condition: Used Location: Pedricktown, United States Fryma Koruma MZ-130/B toothed colloid mill for milling, dispersing and homogenizing liquid to highly viscous materials. Capacity range approx.: 700 - ... more7,000kg/hr. Product fineness approx.: 100 - 500um.
Buy It Now
Condition: Used Location: Millwood, United States All prices are FOB Millwood WV unless otherwise noted.
Buy It Now
Condition: New Location: Boyers, United States We have for sale a unused US Stoneware 12 Gallon ceramic ball mill. We a owners manual. It seems like a pretty standard 12 gallon mill. It is 208/230/460 ... moreVolt 3 Phase 60 Hz. Looks like the company I bought it from put on their own hood. Never used. It looks like these are over 38K new. We will load on your truck. Thank you for looking. Mike Tenney - Tenney Equipment Company
Buy It Now
Free Shipping Condition: New Location: Chino, United States Mill Plant Machine FZ102 Grinder Micro Plant Grinding Machine 110V 1400r/m. The machine uses a high-speed rotating knife and fixed knife to form a cutting ... moresurface for crushing, which generates little heat.
Buy It Now
Condition: Used Location: Painesville, United States » One(1) used 6' x 6' Steveco Pebble Mill. » Equipped with pinion gear and bolt on bull gear. » Inverter is a PowerFlex 70. » Inverter allows for slow ... morestart. » 10" x 14" urethane grinding door and standard drain door.
Buy It Now
Condition: Used Location: Pedricktown, United States GREERCO Model W500H In-Line Colloid Mill/High Shear Mixer. Horizontally mounted. Has stainless steel adjustable rotor/stator. Inlet hopper. Portable, ... moreon wheels/casters. Last used in Sanitary Food application.
Buy It Now
Free Shipping Condition: Used Location: South Gate, United States Model: ER40. Collet holder in very good condition and shows no sign of usage. Kit Includes 15 Collets, Collet Holder, Chuck Wrench. Collet Sizes All components ... morehave been scribed by previous owner with the initials CB.
Buy It Now
Condition: Used Location: Millwood, United States Installed to stainless steel portable stand with a base area of 30" X 40". 7.5HP V-belt drive, 1765 RPM severe duty motor. Unit is gravity fed with tilt ... morepan. ITEM #: 20248.
Buy It Now
Condition: Used Location: Painesville, United States US Stoneware Jar Roller Mill, 2 tier, 2 jar capacity. » One (1) used US Stoneware Jar Roller Mill. » Two jar capacity. » Center of rolls are adjustable ... morefrom 4" to 7". » Two tiers.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
Free Shipping Condition: Used Location: Osseo, United States Premier Mill Planetary Mixer With Vacuum Cover And Jacketed Bowl. Premier Mill. Capacity: 5L. your account number during checkout. If you do not have ... morean account No Worries! The Original Manufacturer's warranty does not apply.
Buy It Now
Condition: Used Location: Millwood, United States Missing internals. No grinding wheels included.
Buy It Now
Condition: Used Location: Millwood, United States Air-cooled bearings and three stainless steel Fitzmill screens. NEW- 10HP V-belt drive, 3510 RPM inverter duty motor. Installed to mild steel portable ... morestand with a base area of 40" X 55". Mill is gravity fed from a 36" wide tilt pan into a 6" X 4" slant inlet.
Buy It Now
Condition: Used Location: Toledo, United States Both Ball Mills are available In April 2024. Installation manuals available upon request. Rubber liners. Serial # 73239, and _______.
Buy It Now
Condition: Seller refurbished Location: Congers, United States Hazardous Location Motor. 460 V, 3 Phase.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product parameters: Model: FZ102 Voltage: 110V Power: 180-200W Speed: 1400r/min Crushing chamber diameter: 102mm Screen aperture: 0.5, 1.0, 1.5mm (one ... moreinstalled on the machine) Crushing effect: 30-120 mesh Each crushing weight:
|
|
|
|
antique rock crusher, with hammer mill, gold mining? lime dust/
Antique rock crusher. jaws are 12" by 5" also has hammer mill built in. The jaw side of the crusher freed up and apart for rebuild. Bearings and shafts look good and it could just be re-assembled. But some repair is needed to one of the connecting rods(solid brass) Hammer mill parts look to be in excellent original shape, just stuck from sitting. A gate directs crushed rock into the hammer mill when desired. This was to make lime dust, or to process ore. weighs about two tons. jaws show no wear. I can help re-assemble and help load. Forklift on site for re-assemble, but must be rolled onto trailer.
|
|
|
MN-NEW ULM-EAGLE ROLLER MILL COMPANY-DANIEL WEBSTER FLOUR-BABY-1909-K64441
MN-NEW ULM-EAGLE ROLLER MILL COMPANY-DANIEL WEBSTER FLOUR-BABY-1909-K64441 IMPRINT FROM POSTAL CANCEL AND SOME POSTAL INK ON FRONT OF CARD LIGHT BEND IN FIELD TYPICAL SIGNS OF AGING MINOR SMUDGES OR LIGHT SOILING ARE EVIDENT A LITTLE HEAVIER THAN AVERAGE WEAR. ESPECIALLY AT BORDERS AND CORNERS. OVERALL NICE AND COLLECTIBLE Item is an original postcard. I will note if card has been mailed in this description. All items shipped in hard plastic sleeve and packed securely. I typically respond to you within a few hours of the auction end. But don't be concerned if I need a couple of extra days. Prompt payment is appreciated. Please see feedback for comments on packaging and speed of delivery. I will ship worldwide-please refer to my Store Home Page for current shipping rates. Domestic and outside the United States. Shipping Discount offered ... morefor purchases of multiple postcards. Click here to view my other auctions Powered by
|
|
|
1938 Ad Plymouth Rubber Horse Mill Chrysler Automobile - ORIGINAL ADVERTISING
Home ~ Affiliations ~ Discounts ~ FAQs ~ Grading and Certification ~ Premium Shipping ~ About Us VINTAGE ART 1938 Ad Plymouth Rubber Horse Mill Chrysler Automobile- ORIGINAL ADVERTISING Details Year: 1938 Type: Original Print Ad Grade: Near Mint/ Very Fine+ Authentication: Dual Certificates Image: Black/ White Approximate Size(inches) 10.25 x 14 Approximate Size(cm) 26 x 36 Description and Condition This is an original 1938 black and white print ad for Plymouth automobiles. The ad explains. Extra pounds of rubber are used in Plymouth for the same reason this horse has rubber shoes-to cushion shock-cut down noise" CONDITION This 73+ year old Item is rated Near Mint/ Very Fine+. Light aging in margins. No creases. No natural defects. No surface rub. No tears. No water damage. To find other items from this specific collection in our eBay ... morestore. Please. Keywords specific to this image: Chrysler Corporation. Backbone, Cartilage, Dam, Pricing, 1938 Plymouth De Luxe, Detroit, Floating Power, Engine, Milk, Trees, Sap, Major Bowe Vintage Advertising. FTT9A4C38 Product Pricing& What We Deliver At times we receive inquiries about our pricing. Especially for vintage advertising or historical halftone prints, and are asked why our prices are consistently higher than some other sellers of similar items. For the first five years of our business, we asked our primary consumer base what they wanted. Our primary consumers- historical societies, historians, archivists, curators, university professors, historical decorators, and collectors, etc. have diverse and specific needs and we've built our business to accommodate those needs, like no other seller worldwide. Below is what is unique about how and what we offer as the world's leader in print ephemera: Product Packaging. Every product is placed against custom black acid-free board with crystal-clear. Archival protective closures. We are the only sellers in the industry who provide display-quality black boards with every item(which also make exceptional presentat
|
|
|
Monarch Ball bearing attrition mill Sprout Waldron brochure feed milling 1920s
Monarch Ball bearing attrition mill Sprout Waldron brochure feed milling 1920s You're bidding on a vintage farming related brochure or catalog. All from same collection and truly rare finds. condition for age is great. Normal wear, dog ear, crease from folding, slight stain or pencil mark would be normal for a document this old. ANY other issue's will be mentioned below. Page count = 3 split on lower spine. One of over 500 to list in next few months. I will combine shipping. First class mail will be method of shipping. Please wait for combined invoice before paying. Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge I charge only what the U.S. Postal Service does. Not some inflated amount- usually the least expensive way: Media mail for books, First Class whenever possible, Priority if it is too heavy ... morefor first class. UPS for any item over 5lb that won't fit into a flat rate box. I do not charge for handling, additional materials- such as, boxes, bubble wrap, tissue paper, driving to the Post Office or paying someone else to assist. I will combine shipping, please wait for invoice before paying if purchase more than one alike item. Returns: Item must be returned within: 3 Days Refund will be given as: paypal refund. Return shipping will be paid by: Buyer- Unless item not as described. Return policy details- In the event of breakage: please save all packing materials and call us first for instructions. DO NOT SHIP BACK until we have the package inspected by carrier. We offer a 100% satisfaction guarantee. Customer satisfaction: If you are pleased with your purchase, Please leave me 5 Stars! If you have any concerns please contact me before leaving feedback. Please make me aware of any problem so I may address it and earn your 5 Star Rating. Paypal is preferred medthod of payment. Unless contacted and discussed prior to bidding. I require payment within 7 days. Most of my my items are consigned and I pay my customers weekly. Please ask, or make arrangments prior to
|
|
|
10 # 1.5" Alumina Grinding Media Balls Chemical Mill
You are bidding on 10 pounds of used high alumina balls for ball jar/ ball mill/ pebble mill. These are about 1& 1/2 inch diameter balls. These balls are pretty clean but I recommend that you put them into a ball jar with dishwasher detergent and run them for a few hours and rinse them for a final cleaning before using them The mill should always be filled to about 50 to 55% of its volume with balls for best grinding results. Since the balls have space between them the actual mill volume will be equal to 50% of the mill that is empty + about 30% of the volume that is filled with balls or about 65% of the volume of the mill. Powered by The free listing tool. List your items fast and easy and manage your active items. o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e01e17cb7-0xfb-
|
|
|
Paul O. Abbe Ball Mill / Jar Mill / with grinding media
Don't like our price? Make us an offer! Item Description: Paul O. Abbe Jar Mill/ Ball Mill. Great working condition. Includes ceramic grinding media. As pictured. 110V. About Shipping This Item: This item. Due to size and weight, needs to be shipped via motor freight. We don't use ebay's freight calculator since we can usually beat their prices by a significant amount. Actual freight charges will depend upon your actual location and shipping situation. Please contact us for an exact shipping charge and if you have a residential or commercial address; and if there is a forklift or loading dock available. These will be needed for an accurate shipping quote. About our Feedback: Please do leave us good feedback on all our categories. Unfortunately. Ebay has made it more difficult for smaller sellers and so anything less than perfect ... moreactually counts against a seller. Please let us know if there is anything we can do to accomodate so you can provide us with top ratings on all our categories! If there are any problems or questions, please do not hesitate to ask! Powered by
|
|
|
Pebble/Ball Mill
1/4 HP 3 phase. Approx. 60 gallon. Works Great. Can Include ceramic media. Ceramic Vessel is approx. 1.5-2 inches thick. Local Pick up or shipped freight paid by buyer. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13e04918bbf-0xfe-
|
|
|
Minor Mll - Mill Technology 60 inch wide Hammermill Mill - Up to 500 hp max
Minor Mll by Mill Technology. 60 inch wide mill. Up to 500 hp max. Was used for pet food previously. This mill is in rough shape and will be sold ASIS. If you would like the unit reconditioned and put in full working condition with a new set of hammers. Screens, and a 150 hp motor, add 7500 to the purchase price. Feel free to email or call me directly with any questions. Comments, or to discuss offers. As for payment, a check would be prefered(they made me say I would take PayPal. But we can talk about that when the deal is done) Be confident, you are working with a 26 year old company in its second generation. We strive to make every sale as easy as possible for our customers. Have a great day. Jon Arkin Arkin Sales 913.908.2431 asijon@mwt.net
|
|
|
3.75 Lbs. Alumina Balls Jar Mill Grinding Media USA
You are bidding on 3& 3/4 pounds of used high alumina balls for ball jar/ ball mill/ pebble mill. These balls range in size from 1 inch down to about 3/8 inch. These are much better than new balls because these warn balls are of various sizes which makes for better ball packing. When you start with all new balls you usually only have one size and the ball packing; therefore. The grinding is not efficient. These balls are pretty clean but I recommend that you put them into a ball jar with dishwasher detergent and run them for a few hours and rinse them for a final cleaning before using them The mill should always be filled to about 50 to 55% of its volume with balls for best grinding results. Since the balls have space between them the actual mill volume will be equal to 50% of the mill that is empty + about 30% of the volume that is filled ... morewith balls or about 65% of the volume of the mill. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Rolling mill 4" x 2 1/8" powered 36" feed table
one) Rolling mill. 4" wide x 2 1/8" diameter. Arbor appears to be about 1" diameter. Powers up and runs fine. ¼ hp DC motor. Conveyor belt is 3" diameter stainless steel, 32" long. Manual roll adjustment. Maximum opening is about ¼" The entire structure seems to be made of anodized aluminum. Dayton DC speed controls, 115 vac input l. This unit has a motorized traverse setup that is incomplete. An Ecentric was designed to move a linear slide block perpendicular to the roll feed. The slide carraige is missing along with any related tooling. Footprint is 38" x 22" x 22" $145 shipping in the continental U.S You can send text messages to my cellphone at 9374165497@vtext.com D-6654, 55, 56, 57, 58 If you have any questions. Please email me! Happy bidding! Click to View Image Album Click to ... moreView Image Album Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $145.00 tru International Shipping. $1200.00 s FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
LEESONA 50 SINGLE WINDER , STANDARD MILL MACHINERY , WIRE, TUBING, PLASTIC EXC.
HERE IS A LEESONA 50 WINDER IN LIKE NEW CONDITION. THIS HAS VARIABLE DC DRIVE. AND ADJUSTABLE TRAVERSE. THIS CAME FROM A MEDICAL MANUFACTURER AND I AM NOT SURE IF IT HAS EVER BEEN USED. WILL CRATE FOR SHIPPING AT NO CHARGE. HERE IS A LINK TO THEIR WEBSITE. THANKS FOR LOOKING
|
|
|
Ball, Pebble, Jar Mill with Jar & Zirc grinding media
Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807 8727) A very nice shop built jar roller Also a large US Stoneware jar with Zirc media I believe it is a size 3( 3.3 gallons) We do our best to photograph and describe all equipment as acuratly and honestly as possible Thank You for looking. Good luck if you are bidding! Thank You pat dolan Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Fitzpatrick Fitzmill Comminuting Model M SS Mill
For sale is a Fitzpatrick Fitzmill Comminuting model M hammer/ knife mill in excellent condition. Typical applications include: coarse grinding and chopping of dry material. Size reduction of wet material, de-lumping of agglomerated wet or dry material, pulverizing, solid/liquid blending, granulating compacted material, processing slurries and liquids, processing and conditioning wet and dry materials, pureeing and emulsifying All contact parts are in stainless steel. It has a 3hp 220v 3ph motor. As is. If you have any questions please contact Louis at 614-5891212 or 614-599-8877
|
|
|
89592 Used- Paul O Abbe Pebble Mill, Model 4B, Carbon Steel, Alumina Lined. Jack
Used- Paul O Abbe Pebble Mill. Model 4B, Carbon Steel, Alumina Lined. Jacketed chamber 48" diameter x 60" long. 11" x 14" charge/discharge port with cover. Driven by a 20 HP, 3/60/230/460 Volt motor with a shaft mounted reducer. Approximately 24 RPM drum speed. Includes a dry discharge housing. Unit mounts on 64" tall leg extensions. ref# 89592 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
89586 USED: Patterson Industries Colloid Mill, size 10M, type HTGA, 316 stainles
USED: Patterson Industries Colloid Mill. Size 10M, type HTGA, 316 stainless steel. Jacketed bolt on front cover. Approximately 10" diameter grooved rotor with stator. 1-1/2" diameter inlet/outlet. Driven by a 40 hp, 3/60/220/440 volt, 3510 rpm motor. Manual gap adjustment. Includes a 1-1/2 hp pump. Mounted on a carbon steel base. ref# 89586 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Cincinnati Milling Machine Co NMTB-50 Stub Arbor End Mill Holder 1-3/4" Shank
Up for sale here is a Cincinnati Milling Machine Co NMTB-50 Stub Arbor End Mill Holder 1-3/4" Shank. Used in good condition. Feel free to ask any questions. SCT1295
|
|
|
90593 Used- Fitzpatrick Homoloid Mill, Model JT6, 316 Stainless Steel. 8'' Diame
Used- Fitzpatrick Homoloid Mill. Model JT6, 316 Stainless Steel. 8' Diameter x 2' deep chamber, 12) 304 stainless steel swinging double knife blades. Approximately 1/8' diameter screen holes, 3' top feed with pan. Driven by a 1/2 hp, 3/60/230/460 volt, 1710 rpm XP variable speed motor, minimum/maximum 538/2150 rpm. Mounted on a carbon steel frame with legs and casters. ref# 90593 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
90582 USED: Attritor mill, 304 stainless steel. Approximately 9" diameter x 8
USED: Attritor mill. 304 stainless steel. Approximately 9" diameter x 8 1/2" deep carbon steel mixing can, 2 piece top cover. Approximate 2" bottom outlet. Driven by an approximate 2 hp Reeves varispeed motor, min 276, max 2000 rpm. Mounted on a carbon steel base on casters. Looks like a Model 1S. ref# 90582 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
90420 Used- Entoleter Centrimil Impact Mill, Carbon Steel. 14" Diameter rotor. D
Used- Entoleter Centrimil Impact Mill. Carbon Steel. 14" Diameter rotor. Driven by a 20 hp, 230/460 volt motor. Base mounted. ref# 90420 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Kady Mill Laboratory Model LB Disperser (Mill)
Kady Mill Laboratory Model LB Disperser(Mill) Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807 8727) Laboratory Model LB Kady Model LB is a high-speed. Efficient lab mill for all types of dispersions. Results from this bottom entry unit correlate to the entire line of Kady� Mills. used in many plants for formulating for all plant production mills. A. The Model LB is a fast, efficient unit for all types of dispersions. The results from this bottom entry unit correlate to the entire line of Kady� Mills. The LB is used in many plants for formulating for all plant production mills. B. The LB has a batch working capacity of one US gallon. C. The unique Kady� dispersion head consists of a slotted stator inside a rotor and works on a theory of impingement. D. All wetted parts are ... morestandard in stainless steel. E. The Model LB requires only 1.41 sq. ft. of space. F. The Model LB is equipped with a 3 horsepower motor. G. Custom engineering is available to meet your specific needs. H. Dispersions are made in minutes permitting same day delivery of samples to customers. I. A one gallon stainless steel water jacketed vessel for heating or cooling is standard. Options include vacuum/pressure and high temperature jackets. J. Dry mixing blades and/or dissolver blades are optional. K. Vacuum operation is optional. We do our best to photograph and describe accurately Contact(845) 807 8727 with any questions Thank you for looking& good luck if you are bidding! pat dolan
|
|
|
Fryma Koruma toothed colloid mill MZ 50
Fryma Koruma toothed colloid mill MZ 50" Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807 8727) Fryma Koruma toothed colloid mill MZ 50Shaft seal single acting mechanical seal double acting Capacity range approx. 30- 300kg/h Product fineness approx. 100- 500μm General functional features The Fryma Koruma toothed colloid mills are mainly used for wet grinding of liquid and high viscous suspensions. Step-less adjustment of the gap between rotor and stator. This offers the possibility to perfectly adjust the grinding gap to the application. Stainless cast body AISI316 Installation vertical Main drive 0.75kW/ We do our best to photograph and describe accurately Contact(845) 807 8727 with any questions Thank you for looking& good luck if you are bidding! pat dolan
|
|
|
Premier 6 inch Stainless Steel Colloid Mill
Premier 6 inch Stainless Steel Colloid Mill( two units available) Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807-8727) Premier 6 inch Stainless Steel Colloid Mill( two units available) Equipment offeredNorth Brunswick NJ 08902 Subject to prior sale! Export Welcome! Skidding. Crating or Container loading available for an addtional fee. Package Deals or Offers may be considered! We do our best to photograph and describe accuratly Contact(845) 807-8727 with any questions Thank you for looking& good luck if you are bidding! pat dolan Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Sturtevant Pin Mill ( Incomplete)
Sturtevant Pin Mill( Incomplete) Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807-8727) Sturtevant Pin Mill( Incomplete) Just the mill. NO hopper, No drive Equipment offeredNorth Brunswick NJ 08902 Subject to prior sale! Export Welcome! Skidding. Crating or Container loading available for an addtional fee. Package Deals or Offers may be considered! We do our best to photograph and describe accuratly Contact(845) 807-8727with any questions Thank you for looking& good luck if you are bidding! pat dolan Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
CPM Century Pellet Mill Dies - 16" diameter, various sizes available
CPM Century Pellet Mill Dies We have various sizes available. Please call for additional information. Dies will fit a CPM Century pellet mill 16 inch diameter 14 days right of return Other sizes available Freedom Equipment has helped hundreds of customers with their pelleting. Packaging, and processing applications. If you have any questions or need any assistance Call 815-226-9150 or email robert@freedomequipment.com Freedom Equipment Specializes in: Pellet Mills. Pellet Mill Plants, Pellet Coolers Screeners. Shakers, Sifters, Grain Cleaners Dehydrators. Dryers and Drying Systems Hammer mills. Hogs/Chippers/Grinders Crumblers. Flakers and Roller Mills Packaging. Processing and Plant Machinery Available from Freedom Equipment: Equipment Appraisals. Liquidations, Equipment Rebuilding Services, On-site Repair Service, Installation Services, ... moreConsulting Services, as well as quality New, Used, and Reconditioned Machinery. Industry Experience: General Feed. Aquaculture, Wood Pellet and Biomass Pellets, Organic and Inorganic Fertilizers, Plastics, Food Packaging and Processing, Pet Food, Pharmaceutical, and Chemical Industries. F R E E D O M E Q U I P M E N T Pelleting. Packaging, Processing& Plant Machinery Customer has a 14 day right of return for the full purchase price of the machine if not fully satisfied with this machine. Customer is responsible for all crating costs. And shipping charges both ways. Item must be received within 14 days from the time the unit is delivered. All invoices not paid within 10 days may be canceled without notice. Purchase prices do not include shipping. Crating or skidding. Please contact Freedom Equipment to make shipping arrangements for your equipment, or for shipping/crating/skidding quote. Purchase prices do not include any federal, state, or local taxes. Buyer is responsible for determining if such sales tax is applicable and remitting such tax to the governing authorities. Unless otherwise stated herein. The Equipment will be sold FOB Origin. Thank you for your business!
|
|
|
CPM 7000 Pellet Mill Dies - 22.5" diameter, various sizes available
CPM 7000 Pellet Mill Dies We have various sizes available. Please call for additional information. Dies will fit a CPM 7000. CPM 201, or CPM 202 pellet mill 22.5 inch diameter 14 days right of return Other sizes available Freedom Equipment has helped hundreds of customers with their pelleting. Packaging, and processing applications. If you have any questions or need any assistance Call 815-226-9150 or email robert@freedomequipment.com Freedom Equipment Specializes in: Pellet Mills. Pellet Mill Plants, Pellet Coolers Screeners. Shakers, Sifters, Grain Cleaners Dehydrators. Dryers and Drying Systems Hammer mills. Hogs/Chippers/Grinders Crumblers. Flakers and Roller Mills Packaging. Processing and Plant Machinery Available from Freedom Equipment: Equipment Appraisals. Liquidations, Equipment Rebuilding Services, On-site Repair Service, Installation ... moreServices, Consulting Services, as well as quality New, Used, and Reconditioned Machinery. Industry Experience: General Feed. Aquaculture, Wood Pellet and Biomass Pellets, Organic and Inorganic Fertilizers, Plastics, Food Packaging and Processing, Pet Food, Pharmaceutical, and Chemical Industries. F R E E D O M E Q U I P M E N T Pelleting. Packaging, Processing& Plant Machinery Customer has a 14 day right of return for the full purchase price of the machine if not fully satisfied with this machine. Customer is responsible for all crating costs. And shipping charges both ways. Item must be received within 14 days from the time the unit is delivered. All invoices not paid within 10 days may be canceled without notice. Purchase prices do not include shipping. Crating or skidding. Please contact Freedom Equipment to make shipping arrangements for your equipment, or for shipping/crating/skidding quote. Purchase prices do not include any federal, state, or local taxes. Buyer is responsible for determining if such sales tax is applicable and remitting such tax to the governing authorities. Unless otherwise stated herein. The Equipment will be sold FOB Origin. Thank you for yo
|
|
|
75 hp NETZSCH BEAD MILL model RM 45GL
J. Little Mercer Co. Inc. C-2203 75 hp BEAD MILL Model/serial no. 204-392.1985 model RM 45GL Manufacturer NETZSCH INC. Dimensions 50" x 60" x 110" approx Construction/configuration stainless vertical Inlets/outlets 2"si. 2)1"si, 3) 1.5" si General data used for making ink. Approx weight 7000.lbs Motor 75 hp.1190 rpm Electrical data 3 ph. 89 amp, 460 V Unit is used but in good condition. Canadian customers need to supply there own Customs Broker contacts. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs ... morepaperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. SORRY NO PAYPAL
|
|
|
90 GAL PATTERSON VACUUM BALL MILL REACTOR EXCELLENT 10 HP vari drive
J. Little Mercer Co. Inc. C-1567 90 GAL BALL MILL REACTOR Model/serial no. MILL REACTOR S/N 87MX0839.1988 Manufacturer PATTERSON INDUSTRIES Dimensions 36"DIA. x 20" W/4" DISHED ENDS.O/A 45"X114"X93" Construction/configuration Carbon Steel Code/N.B. 35 PSI:Jkt:in JKT=100 PSI. SH= FV/100 PSI@ 400 DEG.F. Inlets/outlets(2)3"OUTLETS W/VALVES. 10"SP, SJI& SJO General data EXCELLENT CONDITION! APPROX. 90 GAL TOTAL VOL. W/VAC ARM Motor RELIANCE 10 HP. 1755 RPM Drive REEVES VARI-DRIVE 17.1 RATIO.OUTPUT=51.7 155 RPM Electrical data 230/460V. 3PH, 60HZ A PROCESSING unit that combines the Junctions of a ball mill and a reactor has been developed by Patterson Foundry& Machine. East Liverpool, Ohio. The Mil-Reactor mixes materials uniformly while they are reacting, maintains desired heat transfer rates, and ... moreturns out product of the desired particle size, Patterson says. The Mil-Reactor comes with working capacities from 5 to 500 gallons. And internal pressure can be controlled from full vacuum to 50 p.s.i.g. The unit's heat transfer jacket can withstand up to 125 p.s.i.g. and can be used for either heating or cooling. Liquids, slurries, or gases can be added through access lines while the reactor is in operation, and vapor can be removed while solids are being dried. Among typical process operations Patterson says the Mil-Reactor can handle: Reaction between solids and gases. Handling of solids as slurries. Drying, reacting with gas, then reslurrying. Fine wet grinding. Unit is used but in good condition. Canadian customers need to supply there own Customs Broker contacts. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other
|
|
|
#4 Wiley Mill Thomas Scientific
THIS IS A WORKING THOMAS WILEY MODEL 4 MILL# Shipping on this item is 250.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is a item ... morethat must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item.
|
|
|
Bridgeport Torque Cut 22 CNC Mill 1994
Good working condition. This vertical machining center is being replaced with a new 2013 Mill. Manuals are available. The mill was used in a tool room and not production.
|
|
|
160" PHOENIX VTC144/160 4-Axis CNC Vertical Boring Mill 2008
For more info; Jack 1.800.382.8322 or email jack(at)fmsweb.com Check our 100% Feedback! 160" PHOENIX VTC144/160 4-Axis CNC Vertical Boring Mill Model: VTC 144/160 | Age: 2009 Specifications: 160" PHOENIX VTC144/160 4-Axis CNC Vertical Boring Mill Age: 2008(7) Machines Available Fanuc 18i-T 4-Axis CNC Control Table Diameter 144" Maximum Swing 160" Height Under Rail 42" X-Axis Travel of Ram Past Centerline 24" Z-Axis Vertical Ram Travel 50" Ram Cross Section 12" x 12" Table Speeds 0-100 RPM, Table Speed Gear Ranges 2, Table Weight Capacity 35 Ton, Z-Axis Thrust 12.000 Lbs, X-Axis Thrust 12.000 Lbs, Feed Rates 150 IPM, Rapid Rates 300 IPM, Table Power 130 HP, EQUIPPED WITH: Fanuc 18i-T 4-Axis CNC Control(2) Vertical Ram Heads(2) 16 Station Automatic Tool Changers Part and Tool Probe Hardened& ... moreGround Box Ways on Cross Rail Fixed Rail Design Forged Rams Heavy Duty Casted Base. Columns& Cross Rail Timkin Cross Roller Bearing Hardened& Ground Table Gear 103" Diameter 3" Diameter Hardened& Ground Ball Screws GE/Fanuc AC Servo Drives Heidenhain Linear Feedback Dual Chip Conveyors*Note: Height Under Rail Can Be Increased with The Purchase of Factory Riser We reserve the right to end this listing at anytime as we have local representitives promoting this item. Thanks for looking! wismet kevin prestige mach
|
|
|
6816 FRITSCH PULVERISETTE 15 PULVERIZING MILL ON STAND 120 VOLT
6816 FRITSCH PULVERISETTE 15 PULVERIZING MILL ON STAND 120 VOLT STANDARD FUNNEL MODEL: PULVERISETTE 15 SERIAL: 15.4010/02213 VOLT: 100-120 AMP: 16.5 WATT: 1850 HZ: 60 USEE 6816 CRATE SIZE: 36X42X48 CRATE WEIGHT: 195LBS Check out my! If you would like a shipping quote. Please email your postal/zip code and if it's shipping to a business or residential address. Also please let us know if you have a loading dock or forklift to unload. If you have any questions, please call Jordan at 612-588-9553 or email jordan@usequip.net. All questions and/or offers will be responded to during regular business hours Monday-Friday. Shipping and Handling We ship items Monday-Friday, 8:00 am- 4:00 pm. Buyer pays ALL Shipping& Handling(packaging) fees. Item(s) will ship between 1-5 business days after payment has been received. Shipping cost varies on ... moreall items. Please email for exact quotes and include your zip code in all shipping inquiries. Additional fees for International shipping do apply. Payment in FULL must be received within 7 business days of auction closing, unless prior arrangements have been made. By bidding on an item, you accept the terms noted above. Return Policy ALL SALES ARE FINAL and ALL ITEMS ARE SOLD AS IS. We sell USED equipment. In most cases, we are unable to test the equipment for its specific application. So PLEASE know what you are buying before you bid. We are happy to share any information we have on any product to help you make an informed decision. Please carefully review each item description and photos. If you have questions about what is included or its condition, please ask before you bid! US Equipment Exchange makes no warranties, express or implied, and US Equipment Exchange expressly excludes and disclaims any warranty of merchantability, non-infringement or fitness for a particular purpose. US Equipment Exchange assumes no responsibility for any inaccuracies, including without limitation any pictures, descriptions or other information relating to the assets as contained on the this webs
|
|
|
Norton laboratory Jar mill 000 BF Chemical
Vintage NORTON COMPANY Chemical process products milling jar 5 ½” tall. 3 ¼” diameter
|
|
|
GIFFORD WOOD COLLOID MILL SERIAL 0V6 6009
This sale is for a Laboratory Surplus Gifford Wood Colloid Mill Serial# 0V6 6009. No part# listed on unit. Motor 4 AMP, no H.P. Rating available. Item is listed in"parts, not working" condition, but this unit opperates very smoothly, and is in fair cosmetic condition. Buyer to pay calculated shipping via UPS Ground. Call with any questions. Mark 916-761-6310. from
|
|
|
SWECO VIBRO-ENERGY MODEL M18-T GRINDING MILL
SWECO VIBRO-ENERGY MODEL M18-T GRINDING MILL(S/N: 18M-872-6) With SWECO VIBRO-ENERGY MODEL M18L GRINDING MILL(S/N: M18108741C) and box of parts. Springs. RPM 1140 HP1/4 Volts 208 PH 3 Cycle 60 ITEM IS UNTESTED AND SOLD AS IS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ed9b25813-0x107-
|
|
|
CPM Master Pellet Mill
CPM Master Pellet Mill For Sale. Unit has a 40hp motor. Product feeder, steam conditioner, 2) feed cones, and(4) 12" dies w/ 5/8" holes.
|
|
|
Palla Mill, vibratory mill, grinding mill, pulverizer
Used Palla Mill model 20U. Currently contains carbon steel rods that have less than 20 hours on them. Also includes ceramic balls in a separate barrel. Sale can include container in last photo. Location is Ferndale Washington USA. Electric motor specifications in photo. Buyer responsible for shipping. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13edea04365-0xfe-
|
|
|
Sweco M18-5 Vibro-Energy 5-Place Wet Grinding Mill with Accessories
Sweco M18-5 Vibro-Energy 5-Place Wet Grinding Mill with Accessories Description Sweco M18-5 Vibro-Energy 5-Place Wet Grinding Mill with Accessories Jars and Grinding Media. 1/4 HP 1140 rpm 230V 3ph Baldor Motor Pushbutton Starter, This item requires freight shipping. Please contact us for a quote prior to purchasing. Manufacturer Sweco Manufacturer Part Number M18-5 Item/Ship Weight 281 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision ... morenumbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item may require palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 44986 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though
|
|
|
Exakt/ Exact Technologies 3 Three Roll Mill Model 80S - Warranty -Mint Condition
Feel free to contact us for additional information through ebay mail. Or directly at: nrscientific@gmail.com or at(201) 592-1864. Exakt Model 80S Three-Roll Mill with Variable Frequency Drive Control Current cost over $32.000. Type: 80S S/N: 1620 Ceramic Rollers. Variable frequency speed controller with digital display. 230v/ 60 Hz/ 1.1 kw/ 4.9A This mill will ship in excellent operational condition. And carries our standard 4-month, no-nonsense warranty. Normal 0 For your reference. The seller is N&R Scientific Co. Inc. We have been providing the highest quality refurbished and fully guaranteed equipment worldwide for over 35 years. You can purchase with complete confidence that the equipment will be provided in excellent cosmetic and perfect operational condition. Our 50,000 square foot facility is located in the metropolitan NYC area. ... moreMa nu fac turer's De scription: The"S" Series Three Roll Mills are feature rich and provide performance that meets or exceeds that of much larger production models. The unique tensioning system of the"S" Series minimizes the free play in the roller ball bearings insuring a more constant gap and ultimately a finer. More uniform particle size in the product. And the gap is easily set with a single hand wheel for parallel roller adjustment to 3-5 microns at its closest setting. The roller materials also reflect the care that has gone into the design of the"S" Series. The roller tensioning system and constant gap make it possible to use a variety of materials for the rollers. Chrome plated. Hardened stee l P9- Aluminum Oxide(99.7% Al 2 O 3) In two surface finishes P8.8- Zirconium Oxide(ZrO 2) 80"S" only) With the introduction of ceramic-based rollers. Metal contamination of the product during processing has been dramatically reduced. With the ensuing introduction of ceramic scraper blades, metal contamination can be eliminated. Scraper blades are available in plastic, surface treated steel, aluminum oxide and zirconium oxide. Additional
|
|
|
Thomas Wiley Lab Mill # 4
Thomas Wiley Lab Fiber Mill Model 3375-E45 Thomas Scientific Year 2008 Serial# 110701 120 Volt. 50-60 HZ, 11.5 Amps This unit is a lab scale mill for milling fibrous materials. It u ses a screen with sheer blades to cut/mill fibrous materials to desired sizes as you can see in the photos. This was purchased brand new and used for Research and Development only. With less than 50 hours of use milling carbon fiber materials. It worked really well for our project but is not required any longer. The New cost was approximately $14.000. This is a great deal for anyone in need of a lab mill of this caliber. and needs it NOW. Thomas Wiley is one of the best quality manufacturers of this type of lab mill and is world renown. This machine is perfect and doesn't need any work. It can be moved right into your lab and plugged in and start working. ... moreWe will load this free on to your truck for pick up strapped on a pallet and wrapped with plastic at our location in Ashland, Ohio. If we need to put the mill into a wood crate then an extra charge of $150 will be needed.
|
|
|
Hobbs 40 HP hammer mill Model 420
Hobbs Model 420 Hammer Mill with 40 hp 3 phase 230/460 volt 100/50 amp electric motor. Hammer Mill was fully operational at time of tearout. It was being used to run pine bark for a peatmoss plant to closed. Due to time setting in yard it is recommended to check bearing greese& electric motor before putting back into operation. Buyer can pickup item or make arrangments for transport. Feel free to ask questions.
|
|
|
Sprout Ace Junior pellet mill 12" ID 3/16" hole 1-3/8" overall thick die
Sprout Ace Junior pellet mill die. It is a 12" ID die. Measurements: 3/16" inlet hole size 1-3/8" overall thick 7/8" effective 1/2" relief 3-3/4" overall width 2-1/2" face width Numbers on the die: 17348B FREE SHIPPING to any USA address(except Guam. Puerto Rico and Alaska) International buyers please note: Import duties. Taxes and import charges are NOT included in the item price. These charges the buyer's responsibility. Please check with your customs office to determine costs prior to bidding or buying. Please contact us for a quote for freight.
|
|
|
CPM (California pellet mill) model 7800 30" die REBUILT!!!
This is a CPM(California Pellet Mill) model 7800. With a 30" die. You could eat off these gears! The price is for this pellet mill rebuilt. If you want to purchase it AS IS. P lease contact me with your questions! Please contact me with questions- this is my field of specialty and I can advise as to whether this equipment will work in your application. I also have other pellet mills(not listed) as well as several pellet mill dies of different sizes(see my other listings) FOB El Dorado. KS
|
|
|
LANDERS PELLET MILL with 20" DIE and conditioner
LANDERS gear driven pellet mill with 20" die. This will cost you around $90 000 if you buy from a dealer- it's a steal at this price. Stainless steel door. 3 roll. Look closely at the gears- wow, they are in excellent condition! Includes Toshiba induction motor 150 HP. 1175 rpm, frame size 447TZ. Includes conditioner with 20HP Baldor motor. The conditioner is in rough condition- needs new shaft. This mill is s old AS IS and needs some work. Please contact me with questions- this is my field of specialty and I can advise as to whether this equipment will work in your application. I also have other pellet mills not listed anywhere as well as several pellet mill dies of different sizes(see my other listings) FOB El Dorado Kansas. A $50 loading fee will be charged. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13eff498290-0x100-
|
|
|
Sprout Waldron 150 HP Hammer mill
Sprout Waldron'Koppers' model 3812 hammer mill with 150 hp motor. Used condition. Prior use in food mill. Manufactured in 1977. Motor is 1770 rpm/480 volt.
|
|
|
Dyno-Mill KDL Special Horizontal Bead Mill/ Media Mill Willy A Bachofen WAB
Up for Sale is a Dyno-Mill KDL Special Horizontal Bead Mill/ Media Mill made by Willy A. Bachofen This unit is in Good Condition. 3 Phase 230/460 V The power cord as been cut for transit so you will have to rewire it when it reaches your location. This is shown in detail in the last photograph. You will note in the last few photographs that a gasket needs replacing and I've pointed that out for you also. This sale includes everything you see shown including the extra boxed accessories and additional attachment. Nothing extra. Beyond what you see, will be included. This item was recently removed from a working environment so you will be offered a 14 day money back guarantee. Please contact us and request a freight quote to your area BEFORE bidding/purchasing. Be sure to specify whether it is going to a business(with a loading dock or forklift) ... moreOr a residence. Please make sure your paypal address is the address you want the item to be shipped to. Buyers DO NOT have the option to arrange their own shipping. Terms and Conditions About Us: We have been selling on eBay for over 5 years now and pride ourselves on our positive feedback and customer satisfaction. We do our very best to describe our items as accurately as possible. If you are unsatisfied in any way. Please let us know before leaving negative feedback, so we can make it right. Questions: If you are unsure about ANYTHING in the listing. Please ask any questions you may have, BEFORE bidding. We are best contacted directly through the eBay Message System…if you contact us via regular email, we may not return your email right away. We take many photos, so it is ultimately up to you to determine the physical condition of the item listed. We will describe the functionality of the item to the best of our ability. If it is not listed or you do not see it in the pictures, it will most likely not be included. Payment: Payment is expected within 72 hours of the close of auction/ sale. If you are unable to pay within this time frame. Please contact us before b
|
|
|
NETZSCH LMC20/LMJ14 small media mill
he NETZSCH LMC20/LMJ14 small media mill is a totally enclosed. Pressurized,grinding system designed to produce fines from solid particles in any liquid carrier down to micron and submicron sizes on a continuous basis. The LMC20(C) uses a Molinex(disc) shaft to agitate the grinding media inside of a cooled grinding chamber. The horizontal grinding chamber has a removable liner with two zone cooling(or heating) and has an integral media fill port. The LMC14(J) uses a John(peg) shaft to agitate the grinding media. This system uses a horizontal grinding chamber with counter pegs to enhance the agitation. The chamber is sealed on the drive end by an easy to replace cartridge type mechanical seal and on the outlet end by a chamber floor with removable separator screen. The mechanical seal is cooled and lubricated by buffer fluid stored in the seal ... morereservoir tank. Both the drive system and the seal reservoir tank are located inside the cast steel frame.
|
|
|
Sundstrand Rigid Mill
Up for auction is Sundstrand Model 22 Horizontal Mill. This is SURPLUS and condition is UNKNOWN. It LOOKS good. But this is sold"AS-IS. Buyer must pay within 24 hours by Paypal. Credit Card or overnight company check only. Machine MUST BE REMOVED WITHIN 5 BUSINESS DAYS of Auction end. Please make your own transportation arrangements. We can load the machine. But only on flatbed truck. Do not sent any other type of truck. Weight is estimated 6,000 lbs.
|
|
|
86693 USED- Netzsch Horizontal Media Mill, Model LIN16, Carbon Steel. Approximat
USED- Netzsch Horizontal Media Mill. Model LIN16, Carbon Steel. Approximate 9" diameter x 14" long jacketed chamber. 16 liter(4.2 gallon) capacity. 4 1/2" diameter cored shaft with a peg style rotor. Driven by a 7.5 KW(10 HP) 3/50/380 Volt, 1740 RPM manual vari-speed motor. Base mounted with control panel. ref# 86693 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Paul O Abbe Ball Mill, Carbon Steel. Non-Jacketed ceramic lined 2 drum capacity
Ball mills(Pebble mills) 2 drum capacity. 3 hp drive motors. Linings in good condition. Includes motor controls. Used to grind powdered materials into dispersions for latex formulas. Top hatch loading. Bottom drain. Will load on truck upright. Best shipped on flatbed. Can load into container. If loaded into a box trailer will need to either be laid down or crated. Crating can be done for an additional $300.
|
|
|
Eiger Mill M1000
Riger mill Model m1000 saw-exp Serial 2468 Single speed More info call Paul 864-634-0711 Posted with
|
|
|
42198003 Used- Union Process Intermittent Type Laboratory Batch Attritor Mill, T
Used- Union Process Intermittent Type Laboratory Batch Attritor Mill. Type B, Size 1S. 304 Stainless steel tank, approximate 0.8 gallon working capacity, 1.5 total. 1 Gallon media volume. Carbon steel jacket. Removable attritor shaft with carbon steel pins, 2 piece split removable cover. Driven by a 2 hp, 3/60/230/460, 1160 rpm Reeves variable speed motor, minimum/maximum rpm 276/2000. Mounted on a frame. ref# 42198003 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Motorized double rolling mill
Up for auction is a 100mm double rolling mill by Grobet/Mario Di Maio Spa. Left roller is smooth for flat stock and the rignt is grooved for round wires. The side rollers are for half-round wire. See manufactures website for complete specs. here: Due to the weight of this item buyer must arrange for shipping or may choose to pick up.
|
|
|
USED SWECO VIBRO-ENERY GRINDING MILL (PART)
ITEM# 07411 USED SWECO VIBRO-ENERY GRINDING MILL(PART) CONTACT US FOR MORE INFORMATION. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank ... morefor payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
44225125 Used- Retsch Pin Mill, Stainless Steel.
Used- Retsch Pin Mill. Stainless Steel. ref# 44225125 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
44856002 Used- Hosokawa Alpine UPZ Fine Impact Mill, Model 250 UPZ, Carbon Steel
Used- Hosokawa Alpine UPZ Fine Impact Mill. Model 250 UPZ, Carbon Steel. 1) Swing type beater with(8) bolt on tip blades, 1) approximate 9” diameter x 5” deep sieve ring with screen. 3” x 4-1/2” Top feed with a bolt on feed chute with a top mounted 0.55kw rotary valve, bottom discharge. Hinged front door. Mill driven by a 11kw(13hp) 3/50/390 volt, 2900 rpm motor. Includes a spare ring, and miscellaneous screens. Mounted on a base. ref# 44856002 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
44582005 Used- Roll Mill Replacement Roll Only. 100" Face x 26" diameter.
Used- Roll Mill Replacement Roll Only. 100" Face x 26" diameter. ref# 44582005 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
62835 Used- Fitzpatrick Therminutor Comminuting Mill, 316 Stainless Steel. Desig
Click To Enlarge- Used- Fitzpatrick Therminutor Comminuting Mill. 316 Stainless Steel. Designed for wet grinding applications. Approximately 13.5" diameter x 20" long rotor with(4) rows of(12) 3/8" thick bolt-on double impact blades. Liquid cooled bearings. Bolt-on top cover with(4) 2" diameter connections. Discharge chute. Driven by a 15 hp, 3/60/460 volt, 3505 rpm motor. Mounted on a stainless steel frame. ref# 62835. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment ... morelocation and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
60751 Used- Morehouse-Cowles 10-25 Sand Mill. 10" Diameter jacketed grinding cha
Click To Enlarge- Used- Morehouse-Cowles 10-25 Sand Mill. 10" Diameter jacketed grinding chamber. Sealed head. Driven by a 25 hp, 3/60/220/440 volt, 1800 rpm motor. No pump. ref# 60751. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee ... morewill be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
60750 Used- Chicago Boiler Sand Mill, Model 8P-Special. Sealed screen chamber, j
Click To Enlarge- Used- Chicago Boiler Sand Mill. Model 8P-Special. Sealed screen chamber, jacketed. 15 hp XP drive 3/60/220-440V/1740 rpm. Viking feed pump 3/4 hp XP. ref# 60750. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged ... moreif paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
44856003 Used- Alpine Omniplex Hammer Mill, Model 40/20, Carbon Steel. (12) Swin
Click To Enlarge- Used- Alpine Omniplex Hammer Mill. Model 40/20, Carbon Steel. 12) Swinging hammers. Approximate 9” x 16” feed throat with a swing back hopper with a 5” x 9” opening. Approximate 7/16” diameter bottom screen holes, bottom discharge chute set up for blower discharge. Driven by a 15kw, 3/50/400/690 volt, 1455 rpm motor. Includes a control panel with an ABB ACS200 Drive. Mounted on a frame. Serial# 129862. ref# 44856003. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment ... morelocation and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13f6d5fd89a-0xef-
|
|
|
Weber & Seelander Laboratory Soap Mill, Plodder and Extruder
Weber& Seelander Laboratory Soap Mill. Plodder and Extruder" Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807 8727) Has been stored badly and requires a complete rebuild. Very hard to find unit. We do our best to photograph and describe accurately Contact(845) 807 8727 with any questions Thank you for looking& good luck if you are bidding! pat dolan
|
|
|
79880 USED: Alpine Rotoplex vertical cutting mill, model A16/8, carbon steel. 10
Click To Enlarge- USED: Alpine Rotoplex vertical cutting mill. Model A16/8, carbon steel. 10" x 9" x 3" deep chamber with(2) 3" wide bolt-on blade rotor, 2) bed blades. Approximate 3/8" diameter screen holes. Top feed chute, side discharge. Driven by a 1.5 kw(2 hp) 550 volt, 1710 rpm motor. Mounted on a base with casters. ref# 79880. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary ... morePlease call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13f76a4f656-0xf6-
|
|
|
79867 USED: Chicago Boiler vertical "Red Head" sand mill, model 30P. Open mill,
Click To Enlarge- USED: Chicago Boiler vertical"Red Head" sand mill. Model 30P. Open mill, continuous duty, approximate 16" diameter carbon steel jacketed tube. Driven by an approximate 50 hp motor. ref# 79867. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other ... morepayment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
79447 Used- Chicago Boiler Vertical Red Head Sand Mill, Stainless Steel. Open mi
Click To Enlarge- Used- Chicago Boiler Vertical Red Head Sand Mill. Stainless Steel. Open mill, continuous duty, approximate 16" diameter carbon steel jacketed tube. Driven by a 50 HP, 3/60/230/460 Volt, 1775 RPM XP motor. Includes a pump system. ref# 79447. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire ... moretransfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
79064 Used- Premier Laboratory/Pilot Plant Super Mill, Model HM-1.5. Gross void
Click To Enlarge- Used- Premier Laboratory/Pilot Plant Super Mill. Model HM-1.5. Gross void volume 1.72 liters(45 gallons) 420 stainless steel inner chamber. Variable speed milling shaft, 5 HP main motor XP, 1/3 HP pump motor XP, 230 Volt. ref# 79064. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. ... morePlease advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
77217 Used- Inoue Seisakusho Horizontal Three Roll Mill, Model S-9X20. (3) 9" Di
Click To Enlarge- Used- Inoue Seisakusho Horizontal Three Roll Mill. Model S-9X20. 3) 9" Diameter x 20" long manually adjustable cored rolls. Brass edge guides. Discharge pan with scraper. Driven by an approximate 5 hp motor. ref# 77217. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please ... moreadvise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
Sweco Model DM70 Vibro-Energy Grinding Mill
For your consideration. SWECO Model DM70 Vibro-Energy Grinding Mill Serial 70DM-10 Diagram M70K13001 RPM 1200. HP 40, Supply Voltage 460 3 Ph, 60Hz Full Load Current 58 Amps Largest Motor Current 51.5 Amps 40Hp VIBRO-ENERGY MOTOR RPM 1175 Unit was recently removed from a working environment. Included in this transaction are two bins full of the ceramic"marshmellow" grinding units. All items are for sale locally and are subject to prior sale. Please contact us with questions! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13f7bf7a721-0xfd-
|
|
|
83390 USED- Fluid Energy Aljet Mill, 316 Stainless Steel. Top feed with hopper.
Click To Enlarge- USED- Fluid Energy Aljet Mill. 316 Stainless Steel. Top feed with hopper. Includes a K-Tron model K2MV-T20 twin screw volumetric feeder, approximate.5 cubic foot an hour capacity. Driven by a 1/2 HP DC varispeedmotor. 2) approximate 3/4" screws. Includes feed hopper and K-Tron DIGI drive controls. Mounted on a stainless steel table with casters. ref# 83390. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for ... moreeach item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
83246 Used- Raymond Air Swept Hammer Impact Mill, Carbon Steel. 6" x 10" feed, 6
Click To Enlarge- Used- Raymond Air Swept Hammer Impact Mill. Carbon Steel. 6" x 10" feed, 6" discharge. Approximate 16" diameter rotor with swinging hammers. Driven by a 40 hp, 3/60/460 volt, 3560 rpm motor. Base mounted. ref# 83246. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. ... morePlease advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
82976 USED: Trost Fluid Energy Mill, model TX, stainless steel construction. App
Click To Enlarge- USED: Trost Fluid Energy Mill. Model TX, stainless steel construction. Approximate 8" diameter grinding chamber with cyclone fines collector and K-tron feeder with 3/4" diameter screw, 1/2 hp DC motor with SCR, on base. ref# 82976. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire ... moretransfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
Paul O. Abbe Right Angle Transmission/Drive for Ball/Pebble Mill? Reduction Gear
Paul O. Abbe Right Angle Transmission/Drive For sale- a Paul O. Abbe Inc. Right Angle Transmission/Drive with a Craftsmen ½ HP electric motor. I assume this would have been used as the drive mechanism for an Abbe Ball or Pebble Mill. But I do not have the mill. Actually I think I might have had and sold the mill years ago. The surplus tag on this says it has been in storage since February of 1988! So as you can imagine it was a bit dirty until I wiped it down. Now it looks pretty good. I think it is pretty obvious that whatever motor Abbe originally equipped it with has been replaced by the beefier Craftsmen. Which turns at 1725 RPM, pretty standard for electric motors. So maybe not a collector’s item any more but definitely a workhorse. One that hasn’t lifted a finger in 15 years. There is no model number on the transmission or whatever ... moreyou want to call it. So I can’t hunt up any specs for you. It visibly reduces the motor RPMs. But I can’t tell you to what level. If you were going to mate this to an Abbe mill you might have to get creative. When the larger Craftsmen motor was installed the drive was raised a bit to line up with the new motor. I think you can see in the pictures where they put a piece of plexi about a half an inch thick under the drive to raise it up. When plugged in the motor fired up immediately and started turning the shaft of the drive at an unknown RPM. That is the extent of my testing and NO warranty is offered. However. IF you pay the asking price and find it has a problem you cannot live with within 14 days of receipt you may return it. Returns are ONLY allowed on Buy It Now Purchases. Accepted Best Offers are strictly an as is sale. No returns allowed. Return would be for a refund of the purchase price. Not including shipping costs. Just so that we are clear on that. This is an item that has not been thoroughly tested. As such it may work fine or it may have problems. So any purchase entails a certain degree of risk. If you Buy It Now your risk is limited to the shipping costs both
|
|
|
SPROUT WALDRON HAMMER MILL MODEL 3812 WITH 100 HP 1775 RPM FULLY REFURBISHED
Fully Refurbished SPROUT WALDRON HAMMER MILL MODEL 3812 WITH 100 HP 1775 RPM If you're looking for a great piece of equipment at a great pr i ce, then look no further! This model will be fully refurbished before it ships to y ou. Allow 4-6 weeks for full refurbish. Refurbish includes new hammers. Pins, spacers, new seals and bearings, refurbished motor, rotor balanced, one screen of choice and a fresh coat of primer and paint. Please ask about international shipp ing. This model includes an inlet magnet as well. C ontact Jason with any questions at 316-283-96 02 or jason@ continentalagra.com You're getting a top quality piece of equipment at the best price as always from Continental Agra Equipment. As a family owned and operated business since 1981. We have the experience to help you with all your equipment needs. Experience the Continental ... moreAgra difference! What makes our equipment better than the rest? We use only the finest materials and parts in our equipment We test run each piece of equipment before it goes out Engineered to meet or exceed competitive products on the market Our rebuild includes fully taking the machine apart We check all parts for wear Replace all necessary wear parts Replace any necessary seals or bearings We include the components many others leave out(such as feeders. Conditioners, and fans) so what you see is what you get, no tricks We can also modify equipment to your specifications. We have an experienced team of quality equipment re-builders and custom fabricators to meet your needs. Call me, Jason, today at 316-283-9602, or email me at jason@continentalagra.com to discuss how we can meet your needs. We look forward to serving you. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f83728c25-0xfd-
|
|
|
Tekmar A-10 Analytical Mill A10
Item Description Tekmar A-10 Analytical Mill A10 Item Condition.Used and in good condition. 149 Powers on and works&149 The finish is coming loose in various places(Bubbling up) FDA requires all listings in this category to include the following text: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. DISCLAIMER: Regardless of the origin of the equipment. Documentation provided or identification appearing upon the equipment, the equipment described and offered here is in no way certified for, recommended for, or offered for any specific use. The purchaser ... moreagrees that the seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment. The purchaser, by bidding on this equipment, indicates their acknowledgment of, and agreement to the terms of this disclaimer. 13030505.s724.lee Combined Shipping We are happy to combine shipping whenever possible. Just contact us and let us know what items and quantities you are interested in. For customer service please feel free to contact us Business Name Wall to Wall Sales. Inc Contact Name Andy Wall Phone Number(501)499-9255 Location Hot Springs. AR 71901 Freight Shipping Info Commercial Location with Loading Dock QUESTIONS If you have questions about this item. Please scroll to the bottom of the page and click the" Ask a question" link. You can also use this to contact us. But you must reference the Item Number and Auction Title in your message or we won't know what item the email is about. Shipping Address: We use Fedex Ground to ship our items and therefore we need a street address to send the item. Please make sure the checkout does not contain a PO Box. Also. We reserve the right
|
|
|
CPM PELLET MILL 22" DIE DUAL SPEED WITH 250 HP MOTOR POWER FORCE FEEDER
Excellent Condition CPM PELLET MILL 202EF-320043-2 22" DIE DUAL SPEED WITH 250 HP MOTOR POWER FORCE FEEDER TO DIE AND CONDITIONER If you're looking for a great piece of equipment at a great pr i ce, then look no further! This model will be fully refurbished before it ships to y ou. Allow 4-6 weeks for full refurbish. Please ask about international shipp ing. This model includes a feeder and conditioner. And is in excellent shape. C ontact Jason with any questions at 316-283-96 02 or jason@ continentalagra.com You're getting a top quality piece of equipment at the best price as always from Continental Agra Equipment. As a family owned and operated business since 1981. We have the experience to help you with all your equipment needs. Experience the Continental Agra difference! What makes our equipment better than the rest? We use ... moreonly the finest materials and parts in our equipment We test run each piece of equipment before it goes out Engineered to meet or exceed competitive products on the market Our rebuild includes fully taking the machine apart We check all parts for wear Replace all necessary wear parts Replace any necessary seals or bearings We include the components many others leave out(such as feeders. Conditioners, and fans) so what you see is what you get, no tricks We can also modify equipment to your specifications. We have an experienced team of quality equipment re-builders and custom fabricators to meet your needs. Call me, Jason, today at 316-283-9602, or email me at jason@continentalagra.com to discuss how we can meet your needs. We look forward to serving you. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13f848eae37-0x102-
|
|
|
CPM MODEL 3020 PELLET MILL 150 HP 1185 RPM 20" DIE WITH FEEDER CONDITIONER
Excellent Condition CPM MODEL 3020 PELLET MILL 150 HP 1185 RPM 20" DIE WITH FEEDER and CONDITIONER S/N NH-395214 If you're looking for a great piece of equipment at a great pr i ce, then look no further! This model will be fully refurbished before it ships to y ou. Allow 4-6 weeks for full refurbish. Please ask about international shipp ing. This model includes a feeder and conditioner. And is in excellent shape. This unit retails new for over $300.000 with the shown options. C ontact Jason with any questions at 316-283-96 02 or jason@ continentalagra.com You're getting a top quality piece of equipment at the best price as always from Continental Agra Equipment. As a family owned and operated business since 1981. We have the experience to help you with all your equipment needs. Experience the Continental Agra difference! What ... moremakes our equipment better than the rest? We use only the finest materials and parts in our equipment We test run each piece of equipment before it goes out Engineered to meet or exceed competitive products on the market Our rebuild includes fully taking the machine apart We check all parts for wear Replace all necessary wear parts Replace any necessary seals or bearings We include the components many others leave out(such as feeders. Conditioners, and fans) so what you see is what you get, no tricks We can also modify equipment to your specifications. We have an experienced team of quality equipment re-builders and custom fabricators to meet your needs. Call me, Jason, today at 316-283-9602, or email me at jason@continentalagra.com to discuss how we can meet your needs. We look forward to serving you.
|
|
|
Sprout Waldron Type 480 9 x 30 Roller Mill
Sprout- Waldren Roller Mill Type 480 9 x 30. It was operational when taken out of service at a food processor's plant in Central California. The rollers are in excellent condition and have many more years of life remaining on them.
|
|
|
CPM 6000 PELLET MILL 20" ID. 6.25" WIDE 150 HP 1185 RPM w/ FEEDER CONDITIONER
Excellent Condition CPM 6000 PELLET MILL 20" ID. 6.25" WIDE 150 HP 1185 RPM WITH FEEDER& CONDITIONER If you're looking for a great piece of equipment at a great pr i ce, then look no further! This model will be fully refurbished before it ships to y ou. Allow 4-6 weeks for full refurbish. Please ask about international shipp ing. This model includes a feeder and conditioner. And is in excellent shape. S/N: 6163-315081 C ontact Jason with any questions at 316-283-96 02 or jason@ continentalagra.com You're getting a top quality piece of equipment at the best price as always from Continental Agra Equipment. As a family owned and operated business since 1981. We have the experience to help you with all your equipment needs. Experience the Continental Agra difference! What makes our equipment better than the rest? We use ... moreonly the finest materials and parts in our equipment We test run each piece of equipment before it goes out Engineered to meet or exceed competitive products on the market Our rebuild includes fully taking the machine apart We check all parts for wear Replace all necessary wear parts Replace any necessary seals or bearings We include the components many others leave out(such as feeders. Conditioners, and fans) so what you see is what you get, no tricks We can also modify equipment to your specifications. We have an experienced team of quality equipment re-builders and custom fabricators to meet your needs. Call me, Jason, today at 316-283-9602, or email me at jason@continentalagra.com to discuss how we can meet your needs. We look forward to serving you.
|
|
|
Stainless Steel die housing for Sprout model 21-250 pellet mill D2552-800-00
Stainless steel die housing for Sprout model 21-250 gear driven pellet mill p art number D2552-800-00(this includes a wear ring. A1893-500/01) New cost: $19.450.00 FOB El dorado KS A $50 packing and loading fee will be charged. International buyers please note: Import duties. Taxes and import charges are NOT included in the item price or shipping cost. These charges the buyer's responsibility. Please check with your customs office to determine costs prior to bidding or buying.
|
|
|
69333 Used- Paul O Abbe Pebble Mill, Model 5AS. 316 Stainless steel (product con
Used- Paul O Abbe Pebble Mill. Model 5AS. 316 Stainless steel(product contact) 36" Diameter x 60" straight side, 30 cubic foot total capacity, 7.5 working, alumina ceramic lined, rated 14.7 psi/fv at 26.7 deg C(80 deg F) jacket rated 14.7 psi at 26.7 deg C(80 deg F) stainless steel skin and dual drum lifting mechanism, side-by-side 18" diameter charge ports with covers. Mounted on stainless steel legs with rotary unions. Main drive 7.5 hp, brake drive 5 hp. Includes control panel and guards. ref# 69333 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
69229 Used- Fryma Coball Mill, Type MSZ50. Stainless steel construction on produ
Used- Fryma Coball Mill. Type MSZ50. Stainless steel construction on product contact parts. Rotor diameter 19.5" 500 mm) jacket rated for 37.5 psi(2.5 bar) Belt driven by a 67.5 hp/45 kw-380 volt/50 cycle/3 ph XP motor including control panel. Overall dimensions are: 78" x 46.8" x 81.9" high(2000 mm x 1200 mm x 2100 mm high) ref# 69229 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
66848 Used- Abbe Ball Mill, Carbon Steel. Jacketed, 5' diameter x 4' long. 78 cu
Click To Enlarge- Used- Abbe Ball Mill. Carbon Steel. Jacketed, 5' diameter x 4' long. 78 cubic foot(587 gallon) capacity. Jacket rated 14 psi. 16" x 16" door, 8" diameter outlet. 2 pillowblock bearings, geared one end. Unit requires approximate 20 hp drive and stand. ref# 66848. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. ... moreWe accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
RECONDITIONED CPM 100HP CALIFORNIA PELLET MILL FEED FERTILIZER-CONDITIONER EXTRA
CALIFORNIA PELLET MILL. CENTURY 75C, SERIAL NO: 109792. 7.1mm(278) DIE. NICE CLEAN MACHINE. INSIDE AND OUT. MACHINE HAS MANY YEARS OF SERVICE LEFT. BUYER PAYS ALL SHIPPING. LOCAL CRANE CAN LOAD. CHARGES $150.00. THERE IS A MAIL LISTING ERROR. BECAUSE EBAY WANTS YOU TO PICK MAIL SHIPPING? SHIPPING CAN BE ARRANGED. BUYER PAYS ALL SHIPPING, Posted with
|
|
|
82123 Used- Greerco Vertical Colloid Mill, Model W250V-B, 316 Stainless Steel. J
Click To Enlarge- Used- Greerco Vertical Colloid Mill. Model W250V-B, 316 Stainless Steel. Jacketed housing. Approximate 2" diameter rotor, adjustable gap settings, rated approximately 20 gpm depending on product. 2" Tri-clamp inlet/outlet. Driven by a 3 hp, 3/60/230/460 volt, 3450 rpm XP motor. Mounted on a base with casters. ref# 82123. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please ... morecall for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
82085 USED: Thropp High Temperature Horizontal Two Roll Mill. (2) 6" diameter x
Click To Enlarge- USED: Thropp High Temperature Horizontal Two Roll Mill. 2) 6" diameter x 13" wide chrome plated cored rolls. Temp range approximately 550 deg F. Adjustable end guides. 2) knee safeties, 2) swinging knife scrapers, manual roll adjustment. Each roll driven by an approximate 7.5 hp motor. ref# 82085. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates ... moreand payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13fba83653b-0x103-
|
|
|
82084 Used- Farrell Technolab Polymill 150L Horizontal Two Roll Mill. (2) 6" Dia
Click To Enlarge- Used- Farrell Technolab Polymill 150L Horizontal Two Roll Mill. 2) 6" Diameter x 13" wide chrome plated cored rolls. 1) Adjustable edge guide. 1) missing. Overhead safety. Roll adjustments. Approximate roll speed front 34/17 rpm, rear 34 rpm. 1:1 to 2:1 friction ratio. Driven by a 9kw, 12 hp) 3/60/460 volt, 1750 rpm motor. Unit requires bearings, drip pan, knife scraper. ref# 82084. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight ... morecarrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13fba836518-0x103-
|
|
|
81314 USED: Ross horizontal medial mill, model MAX1.4, 304 stainless steel. Jack
Click To Enlarge- USED: Ross horizontal medial mill. Model MAX1.4, 304 stainless steel. Jacketed chamber approximately 4" diameter x 7" long. 38 gallon total capacity. Driven by an approximate 2 hp motor. 5 stainless steel milling discs. ref# 81314. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire ... moretransfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
45205 Used- Farrel Two Roll Mill. 6" diameter x 13" face, cabinet style, microme
Click To Enlarge- Used- Farrel Two Roll Mill. 6" diameter x 13" face. Cabinet style, micrometer roll adjustments, rotary unions, split end guides, complete with drive on floor mounting base. ref# 45205. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. ... moreA 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
40223002 Used- Netzch Media Mill, Model LMC60 (E). 57 liter chamber capacity.
Click To Enlarge- Used- Netzch Media Mill. Model LMC60(E) 57 liter chamber capacity. ref# 40223002. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location ... moreunless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13fbbb522ff-0x103-
|
|
|
65256 Used- Draiswerke GMBH Lab Sand Mill, Type PM5STS. Stainless steel jacketed
Click To Enlarge- Used- Draiswerke GMBH Lab Sand Mill. Type PM5STS. Stainless steel jacketed chamber 8" diameter x 16" belt driven 11/5.5 kw(XP) motor, 200 volt 50 hz, explosion proof controls, Viking pump model HH724, approximately.5 hp motor 3/60/200/1420 rpm, unitized on carbon steel base. ref# 65256. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment ... moreterms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
20 ft³ Sweco Vibratory Finishing Mill (Bowl Type) - Model # FMD-20 Great Shape
Sweco® 20 cu ft FMD-20 Vibratory finishing Bowl/ Grinding Mill- Vibro Energy Separator This listing is for a used Sweco Batch Series Vibratory Cleaner. It is in very good condition. Recently pulled from storage. Scrubbed, cleaned, and repainted. Polyurethane Liner is in EXCELLENT condition. FMD-20 Capacity 20 ft³ Maximum Straight Part Length 30 inches Motion Generator 5 hp. TENV, 1140 RPM, 3-phase 460/230 Lining ¾" Cast Polyurethane Elastomer Shipping Weight Approximately 4000 lbs. including base) No controls Time-tested technology provides three-dimensional Vibro-Energy motion for all SWECO Finishing Mills. This motion subjects parts and media to a consistent high frequency tilting movement as they travel in a helical/orbital path around the chamber. The resulting compressive scrubbing action cleans and also removes burrs. ... moreRound sharp corners, and smooths out surface impressions. Because vertical/horizontal amplitudes and the rate of vibration are completely adjustable, your finishing requirements can be handled quickly and efficiently. Batch Mills SWECO Batch Finishing Mills are ideally suited for use with external separating systems, manual parts unloading and for processes that have no media and the entire load can be easily discharged out the bottom door. Offered as-is. And Picked up at our facility. We will load on your truck. Payment can be made by company check(in advance and check must clear prior to shipping) Wire transfer, or PayPal(our least preferred option) Email with any questions
|
|
|
42598001 Used- Netzsch Vertical Media John Mill, model RM-15 GL, type 572.15, cl
Click To Enlarge- Used- Netzsch Vertical Media John Mill. Model RM-15 GL, type 572.15, closed design, 304 stainless steel. Chamber with stationary pins, rotor with fixed pins. 17.5 Liter(4.6 gallon) capacity, approximate 8-80 gallon per hour throughput. Driven by a 30 hp, 3/60/230/460 volt, 1170 rpm XP motor with manual vari-speed wheel. Includes XP control panel. Bowl mounted on legs with casters. ref# 42598001. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of ... morefreight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
42467003 Used- CE Raymond Imp Mill, Carbon Steel. Approximate 96" diameter x 36’
Click To Enlarge- Used- CE Raymond Imp Mill. Carbon Steel. Approximate 96" diameter x 36’ wide rotor with 1’ thick fixed blades. No motor. ref# 42467003. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit ... morecard.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
42425004 Used- Farrell-Ross Roller Mill, Model 10 X 12M, Carbon Steel. Double re
Click To Enlarge- Used- Farrell-Ross Roller Mill. Model 10 X 12M, Carbon Steel. Double reduction two high with one pair of rolls mounted on top of the other. Designed for medium duty partical reduction. 4) Manually adjustable approximately 10" diameter x 12" face carbon steel rolls, top rolls approximately 6 grooves per inch, bottom rolls approximately 8 grooves per inch. Rolls driven by a 10 hp, 3/60/208-230/460 volt, 1760 rpm motor. Top gravity feed, bottom discharge. Mounted on a frame. ref# 42425004. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. ... moreBase shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13fbe85fdc7-0xfc-
|
|
|
42420001 Used- California Century Series Pellet Mill, Model 100C, Carbon Steel.
Click To Enlarge- Used- California Century Series Pellet Mill. Model 100C, Carbon Steel. 2) Approximate 7-1/2" diameter x 4-1/2’face rollers, 16" diameter x 6" deep die. Mill driven by a 125 hp, 3/60/575 volt, 1780 rpm motor. 14-1/2" x 13" Conditioning feed opening, 304 stainless steel pin lump breaker bars, driven by a 7.5 hp, 3/60/575 volt, 1170 rpm motor into a 10’ diameter x 12’ long 316 stainless steel screw feeder, driven by a 1.5 hp, 3/60/330/575 volt, 538 rpm gear motor, ratio 3.20 to 1. Carbon steel hinged front door with discharge. Mounted on a common base. ref# 42420001. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. ... moreIl. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
42092001 Used- Union Process Batch Attritor Mill, type S-100, carbon steel. Appr
Click To Enlarge- Used- Union Process Batch Attritor Mill. Type S-100, carbon steel. Approximate 155 gallon jacketed tank, slurry capacity 70-75 gallons, media volume 75 gallons. Driven by a 20/6.7 hp, 3/60/440 volt XP motor thru a cone reducer. Mounted on a frame. ref# 42092001. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master ... moreCard, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
 |