|
|
Order by: Available to: This site contains affiliate links for which I may be compensated
|
Buy It Now
Free Shipping Condition: New Location: United States Product Function Description: Note: Installation Manual Is Not Included Professional Installation Is Highly Recommended Please Make Sure It Will Fit Your ... moreMachine Before Purchasing It. Please Check Pictures For More Details Application Models: For Skyjack Electric Scissor Lift Models SJIII3220, s/n 60005558 & above, SJIII3226 s/n 27026328 & above, SJIII4620, SJIII4626 SJIII4632 OEM Part Number: 194615,103129 Package Includes: 1x Hydraulic Motor ( As Shown In The Picture） Features: 100% Brand New And High Quality,Durable. It Could Correctly Replace The Original Quality Part. Part Number: 194615,103129.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Function Description: Features: 100% Brand New And High Quality,Durable. It Could Correctly Replace The Original Quality Part. Part Number: 194615,103129 ... moreProfessional Installation Is Highly Recommended Please Make Sure It Will Fit Your Machine Before Purchasing It. Please Check Pictures For More Details. Application Models: For Skyjack Electric Scissor Lift Models SJIII3220, s/n 60005558 & above, SJIII3226 s/n 27026328 & above, SJIII4620, SJIII4626 SJIII4632 OEM Part Number: 194615,103129 Package Includes: 1x Hydraulic Motor ( As Shown In The Picture）.
Buy It Now
Free Shipping Condition: New Location: Everett, United States Genuine Caterpillar 288-1556 Motor Assembly **SALE** Shelf-10
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Product Description: Condition: 100% Brand New Type: Bucket Tilt Cylinder Quantity: 1pc Fitment Type: Direct Replacement Cylinder Rod: 1.62" Cylinder ... moreBore: 3.50" Stroke: 18.19" Replaces Bobcat OE#: 6804674, 6596896, 6800466 Fitment: For Bobcat Skid Steer Loader(s) A220, T200, 863 Package: 1× Hydraulic Tilt Cylinder.
Buy It Now
Free Shipping Condition: New Location: China For JLG Scissor Lift: 1932E, 2033E, 2046E, 2646E, 2658E. 7016742, 3600219, 3673-AB, 3673AB. Part Number.
Buy It Now
$13.95 Shipping Condition: Used Location: Sturgeon, United States This is the transmission to rear end drive shaft off an 860 Ford tractor with a 5 speed transmission and 172 cu in gas motor. It's in good condition. ... moreThe coupler is solidly on the shaft, but I've been able to remove it by driving it off and remitting it with a rubber mallet. Teeth are in good condition. Please look at the pictures. We make it a point to take many pictures from all different angles and sides.
Buy It Now
$10.75 Shipping Condition: New Location: Fulton, United States SEAL 1.12 ID X 1.88 OD. WE WILL BE MORE THAN HAPPY TO HELP YOU!
Buy It Now
Free Shipping Condition: New Location: Lake Mills, United States Replaces Delco Remy Starter nos 1107238, 1107283, 1108469, 1108470, 1113027, 1107826, 1113464, 1108622, 1107246. Replaces Prestolite Starter nos 46-772, ... moreMAB4125, 46-352, MZ4127, MZ4163, 46-479, MZ4178.
Buy It Now
Free Shipping Condition: New Location: San Diego, United States Store Categories. Click to close full size. FINISH THOMPSON A100007 Drum Pump Motor. Air, 1/2 HP. FINISH THOMPSON. Item Specifics. Item. Drum Pump Motor. ... moreType. Application. Chemicals. Body Dia. In. 5-1/2. Duty. Continuous. Housing Material. Steel. HP. 1/2. Includes. Ball Valve. Muffler. Item. Drum Pump Motor. Length Less Shaft(In. 6-5/8. Motor Type. Air. Nameplate RPM. 6.000. Overall Length(In. 6-5/8. Rotation. CCW. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer service hours are Monday through Friday from 7:00 a.m. to 7:00 p.m. CST) About Us We understand the need for small businesses to stay competitive by not paying high prices for the products you need to keep your business running. By offering one price to all customers with no complicated discount structure. We are able to keep our prices low. We have a small. Dedicated staff that works hard to bring you the best p
Buy It Now
Free Shipping Condition: New Location: Slocomb, United States This heavy duty motor is NOT a slim design and is geared at the industry standard speed. This motor is the perfect balance between our very fast APACHE ... moreand our torque monster ENFORCER. 3 YEAR WARRANTY .
Buy It Now
Free Shipping Condition: New – Open box Location: Woodsfield, United States Cheapest on Ebay when posting. i have been cleaning out my garage. selling things i don't need. i try to make it to the post office at least once a day. ... morei welcome questions and accept returns. thank you for looking.
Buy It Now
Free Shipping Condition: New Location: Phoenix, United States L63S1, L63-S1, L63-1, L63, L63-BT, L63-BY. 12098, 12205, 12253, 13047, 13206, 13405, 13422, 13727, 14002. It fits the following Wisconsin OEM Carb Numbers.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States Compatible With: Carburetor For Ford Tractor Replaces Part Numbers EAE9510C B2NN9510A EAE9510D Carburetor For Ford Jubilee NAA NAB 600 620 630 650 660 ... more700 740 800 850 Tractor Carburetor For Marvel Schebler TSX428 TSX580 Carburetor For Zenith 0-13880 13880 Replaces Part Numbers: EAE9510C, EAE9510A, B2NN9510A,TSX428, TSX580 FDS1178 Size： Mounting Studs Measure： 56mm-63mm (Center To Center) Air Inlet Inner Diameter：33.5mm Air Inlet Outer Diamete：39.5mm Intake Side diameter：26.5mm .
Buy It Now
Free Shipping Condition: New Location: Hebron, United States Model Number: E320C E312C E330C E322C E325C 320C 312C 330C 322C 325C. 247-5207 Throttle Motor for Caterpillar 312C 320C E320C E320D 2 Cable 7 Pin. Structure: ... moreDisplay Panel. Our rapidly-expanding product line includes CV Axles, Wheel Hub & Bearings, Suspension & Chassis parts, Complete Strut Assemblies, Shock Absorbers, Drilled & Slotted Brake Rotors, Conventional Brake Rotors, Ceramic Brake Pads, Brake Fluids, Brake Cleaners, Rack & Pinion Assemblies, Gearboxes, Drive Shafts, Transmissions, Brake Calipers, Wheel Lug Nuts, and more.
Buy It Now
Free Shipping Condition: New Location: Chino, United States For Skyjack Electric Scissor Lift Models. Fit ModelsFor Skyjack SJIII 3220 3226 4626 4620 4632. 1x Hydraulic Motor ( As Shown In The Picture）. Your satis ... morefaction is our ultimate goal. It Could Correctly Replace The OriginalQuality Part. ).
Buy It Now
Free Shipping Condition: New Location: China Part Number: 151B-0129
Buy It Now
Free Shipping Condition: New Location: Houston, United States Ditch Witch. Ditch Witch (22). Kubota (22). Bobcat 331, 334 Upper Drive Shaft / Sun Shaft For Travel Motor Final Drive Parts. More reasons to buy from ... moreus Ready to bolt on and go. If you aren’t 100% sure which final drive fits your machine, call us before you buy!
Buy It Now
Free Shipping Condition: New Location: Houston, United States Ditch Witch. Takeuchi (22). Ditch Witch (22). Bobcat 331, 334 Upper Drive Shaft / Sun Shaft For Travel Motor Final Drive Parts. More reasons to buy from ... moreus Ready to bolt on and go. If you aren’t 100% sure which final drive fits your machine, call us before you buy!
Buy It Now
Free Shipping Condition: New Location: Houston, United States Ditch Witch. Ditch Witch (22). Komatsu (22). Bobcat 331, 334 Upper Drive Shaft / Sun Shaft For Travel Motor Final Drive Parts. More reasons to buy from ... moreus Ready to bolt on and go. If you aren’t 100% sure which final drive fits your machine, call us before you buy!
Buy It Now
Free Shipping Condition: New Location: Houston, United States Ditch Witch. Ditch Witch (22). Caterpillar (22). Bobcat 331, 334 Upper Drive Shaft / Sun Shaft For Travel Motor Final Drive Parts. More reasons to buy ... morefrom us Ready to bolt on and go. If you aren’t 100% sure which final drive fits your machine, call us before you buy!
Buy It Now
Free Shipping Condition: New Location: Bluffton, United States Chainsaw & Concrete Saw Parts. Power Sports. Stay rugged, my friend. Ignition Coil for Husqvarna 544-0184-01, 44018401, 503-6202-03, 503620203. Engine ... moreHorsepower. Give us a try! We think you'll see the difference.
Buy It Now
Free Shipping Condition: New Location: Saint Cloud, United States
Buy It Now
Free Shipping Condition: New Location: Joliet, United States New in package CAT sensor. Package is unopened but dirty from sitting in shop. Please verify part number before purchase. 40g.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14aa1d44bec-0x113-
Buy It Now
Free Shipping Condition: New Location: Lake Mills, United States Compatible with Case IH Combine(s) 2144 (1/95-12/97), 2166 (1/95-12/97), 2188 (1/95-12/97), 2344 (1/98-1/02), 2366 (1/98-8/04), 2388 (s/n JJC0276540-earlier, ... more1/98-8/04). Compatible with Case IH Harvester(s) 2155, 2555, 2555 (s/n JJC0249499-earlier).
Buy It Now
Free Shipping Condition: Like New Location: Bluffton, United States OEM Part Number: 391207-Right Side Hydrostat. Transmission This transmission is in good working used condition. This Transmission is Obsolete and Hard ... moreto Find Save BIG on Quality Used OEM Parts! Stay rugged, my friend.
Buy It Now
Free Shipping Condition: New Location: Milledgeville, United States 1975 John Deere 212 Kohler 12HP. 1976 John Deere 212 Kohler 12HP. 1977 John Deere 212 Kohler 12HP. 1978 John Deere 212 Kohler 12HP. 1979 John Deere 212 ... moreKohler 12HP. 1980 John Deere 212 Kohler 12HP. 1981 John Deere 212 Kohler 12HP.
Buy It Now
$5.55 Shipping Condition: Used Location: Fitchburg, United States Spacer rod. One end of rod keyed for M10 wrench. /////////// En ESPAGNOL ////////////////////. Imagen(s): Puede haber varias cantidades de este artículo, ... morepor lo que es posible que no reciba el que está en la imagen.
Buy It Now
$7.99 Shipping Condition: New Location: Springdale, United States TO35, 35X(FE)( with Standard Motors diesel). Fits FERGUSON-MASSEY FERGUSON. Many more parts are available. O.E.M. numbers are for reference only. Replaces ... moreOEM part # 1" FROM BEND TO SHORT. 6-1/2" FROM LARGE END TO BEND.
Buy It Now
$19.94 Shipping Condition: New – Open box Location: Blue Ridge, United States Fram CA2565. AIR MAZE CD-0612509-826. AIR REFINER 10371. AIR REFINER ARM-6125. Open Box item. HEAVY DUTY AIR A-02003. NELSON 84832S. MOTORCRAFT FA978.
Buy It Now
$20.00 Shipping Condition: New Location: Rancho Cucamonga, United States
Buy It Now
Free Shipping Condition: New Location: Webberville, United States How do I know if my order was submitted properly?. Featured Categories. Need help with a part you found?. Warranty1 Year Warranty.
Buy It Now
Free Shipping Condition: New Location: Amer S.O, India FITS MAHINDRA MODELS 3550 HST CABIN T4. 3540 HST CABIN T4. 3550 HST T4. 3540 HST T4.
Buy It Now
$52.62 Shipping Condition: New Location: Lincoln, United States 50 GPM AKG DCS16-12 Oil Cooler w/12 Volt DC Fan. Manufacturer AKG. Flow 50 GPM. Airflow Direction Pull. Drain/Temperature Sensor Port Size SAE 8. Construction ... moreAluminum. Mount Four 1/2" slotted holes on 5.87" x 12.68" centers.
Buy It Now
$8.41 Shipping Condition: New Location: Youngsville, United States Adapt a Mikuni SBN 44 to your OEM 550SX intake manifold with ease to maximise your motors efficency (may fit other single Keihin 38 intake manifolds such ... moreas a 650sx or 750sx). Made from 6061 aircraft aluminum.
Buy It Now
Free Shipping Condition: New Location: Lubbock, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Red Oak, United States NEW OLD STOCK GENUINE CAT 279-5267 CATEPILLAR INSERT. WHAT YOU SEE IS WHAT YOU ARE BUYINGCOMPATIBLE MODELS FOR PART NUMBER 279-5267MOTOR GRADER140 GC ... more120 120H 120H ES 120H NA 120K 120K 2 120M 120M 2 12H 12H ES 12H NA 12K 12M 12M 2 12M 3 12M 3 AWD 135H 135H NA 140 140H 140H ES 140H NA 140K 140K 2 140M 140M 2 140M 3 140M 3 AWD 143H 14L 150 160 160H 160H ES 160H NA 160K 160M 160M 2 160M 3 160M 3 AWD 163H 163H NA 120 GC
Buy It Now
Free Shipping Condition: New Location: Sacramento, United States Plumbing Supplies And Fixtures. Heating And Cooling Supplies. Length: 78 in. Product Type: General Utility V-Belt each. Power Tools. Belt Thickness: 5/16 ... morein. Magic Cover 09F-C9A5G3-12 Self-Adhesive Shelf Liner 9 L ft. x 18 W in.
Buy It Now
$6.00 Shipping Condition: New Location: Hesperia, United States
Buy It Now
Free Shipping Condition: New Location: Houston, United States New KMP BRAND® STARTER MOTOR aftermarket replacement part. From USA seller, from USA stock. (). Compatible Models: 6D105-1 .
Buy It Now
Free Shipping Condition: New Location: Webberville, United States How do I know if my order was submitted properly?. Featured Categories. Need help with a part you found?. Warranty1 Year Warranty.
Buy It Now
Free Shipping Condition: New Location: Jackson, United States Part #5P8500. 10 OEM Style Caterpillar Ignition Keys. We know how important it is to have the right key. Buy from the guys who know and care.
Buy It Now
$4.45 Shipping Condition: New Location: Henrico, United States CharLynn S Series Motor Seal Kit. CharLynn # CL-60026. Fits the S Series Motor.
Buy It Now
Free Shipping Condition: New Location: Locust Grove, United States Engine motor mount compatible with honda crv 2002 2003 2004 2005 2006, engine 2.4L. The 2.4L honda crv motor mount from Lochnchn.
Buy It Now
Free Shipping Condition: New Location: China 【Part Number】Y7S623B548L Y7S623B26. Otherwise deal is final. And we wouldn't use your phone number for other purpose. All products are quality checked.
Buy It Now
Free Shipping Condition: New Location: Montevallo, United States COMPACT HYDRAULIC POWER UNIT / PONY MOTOR. - Reservoir: 4gal cap with sight glass and drain. - Attractive Aluminum tread plate covers. - Honda GX390 13HP ... moremotor with electric startand low engine oil protection.
Buy It Now
Free Shipping Condition: New Location: Sylmar, United States For Kohler - 25 083 03, 25 083 03-S. For Kohler 25 083 02, 25 083 02-S. Inner Air Filter. Outer Air Filter For Kohler. For Outer Air Filter For Bobcat453, ... more463 skid steers 319, 320D, 320G, 321, 322D, 323, 324, 418 skid steer loaders.
Buy It Now
Free Shipping Condition: New Location: Bluffton, United States Fits many Kubota RTV Series Utility Vehicles. PAIR 2 Link TIRE CHAINS 20x10.00x8 for Kubota Lawn Mower Garden Tractor Rider. Plumbing Fittings. Let's ... morework together to avoid this! If you seek assistance we will need as much of the following information as possible, if applicable, to help you find the product you are looking for.
Buy It Now
$25.18 Shipping Condition: New Location: United States Extended Motor Life: By preventing contaminants from entering the motor and reducing internal wear, our seals help extend the lifespan of your hydraulic ... moremotors. Leak Prevention: Precision-engineered seals provide a strong barrier against fluid escape, preserving motor power and performance.
Buy It Now
Free Shipping Condition: New Location: Lake Mills, United States Compatible with Case IH Tractor(s) CX50, CX60, CX70, CX80, CX90, CX100, MX80C, MX90C, MX100, MX100C, MX110, MX120, MX135, MX150, MX170. Replaces Case ... moreIH OEM nos 82034854, 81870361. Compatible with New Holland Tractor(s) TD75D, TD95D, TM115 (11/99-6/02), TM120 (6/02-later), TM125 (11/99-6/02), TM130 (6/02-later), TM135 (11/99-6/02), TM140 (6/02-later), TM150 (11/99-6/02), TM155 (6/02-later), TM165 (11/99-6/02), TM175 (6/02-later), TM190 (6/02-later), TS90 (11/97-7/03), TS100 (11/97-7/03), TS110 (11/97-7/03), TS115 (7/01-7/03).
Buy It Now
Free Shipping Condition: New Location: Lake Mills, United States Compatible with Ford Construction & Industrial(s) 1800, 1801, 1811, 1821, 1841, 1871, 1881, 4040. Compatible with Ford Tractor(s) NAA, 501, 541, 600, ... more601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, 6000.
Buy It Now
$25.18 Shipping Condition: New Location: United States Extended Motor Life: By preventing contaminants from entering the motor and reducing internal wear, our seals help extend the lifespan of your hydraulic ... moremotors. Leak Prevention: Precision-engineered seals provide a strong barrier against fluid escape, preserving motor power and performance.
Buy It Now
$168.22 Shipping Condition: New Location: Hickory, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Ogden, United States Compatible models Caterpillar: 8M3120 Caterpillar Air Filter. Master Card. Wheel Dozer 824 824B 834.
Buy It Now
Free Shipping Condition: New Location: Circle Pines, United States New Stens Flat Idler 280-406 for Simplicity 1606554SM.
Buy It Now
Free Shipping Condition: New Location: Bluffton, United States Chainsaw & Concrete Saw Parts. For/Fits Kohler 24 462 07-S, 2446207S, 24 462 07. Go Kart Parts. Stay rugged, my friend. Check them out. You'd be surprised ... moreat what you'll find. We might even carry an item or part you'd forgotten you needed.
Buy It Now
$33.33 Shipping Condition: New Location: United States
Buy It Now
Free Shipping Condition: New Location: Chino, United States Fitment： For Kubota D905 D1005 D1105 V1205 V1305 V1505 Engine Mower Excavator Tractor Generator Part number: 17208-60010 17208-60012 17208-60015 17208-60016 ... more17208-60017 Package include: 1 × Fuel Shut Off Solenoid NOTE: Please check fitment and part number before ordering Please confirm your old part number matches up with one of the part numbers above. Professional installation is highly recommended (No Instruction Included). For any needs please contact us. .
Buy It Now
$15.58 Shipping Condition: New Location: Lewis Center, United States
Buy It Now
$14.39 Shipping Condition: New – Open box Location: Middletown, United States
Buy It Now
Free Shipping Condition: New Location: Hebron, United States Model Number: E320B 320B E330B 330B E312B 312B. Structure: Display Panel. Perfect match for the original vehicle. We are happy to assist you! Always wear ... moreeye protection and start with installation tools.
|
|
|
|
Okuma Spindle Motor Changeover Unit WCHG-60A/50A
CNC Machine Tool Services 1666 Oakbrook Drive. Gainesville, GA. 30507 770-536-5584 770-536-5508 fax 770-401-3572 cell Email- sales@cncmts.com For a link to our website. Please click on this icon Okuma Spindle Winding Changeover Unit This unit was taken from a running machine and is fully operational. The unit is guaranteed not to be DOA. Overnight Shipping Available. Any Shipping expenses will be buyer's responsibility This was pulled from an Okuma LCC CNC Lathe. Call or email with any questions.
|
|
|
Okuma Motor BL-120E-20T BL12020T 2000 r.p.m 164v 12.1 A NO Encoder
Okuma Motor NO Encoder. Stock# 14119 Part# BL-120E-20T BL120E20T 2000 RPM 164 VOLTS 12.1 AMP If you have any questions Call Mauro: 248-426-5555. Payment We are currently accepting payments via Paypal. Cashiers Check, and Personal Check. All funds must be cleared prior to shipment of goods. Shipping Standard Shipping Hours are Monday through Friday until 4pm Eastern Standard Time. To request overnight or same day shipping please contact us at 248-207-4203. We ship via UPS and Fed-Ex. Shipping through other freight companies will require an additional $20 handling fee. And will be added to the final price. We are willing to ship using the buyers account number provided it is a US account number. For any Freight shipments(150 lbs or over) there will be a $20 handling fee. International Buyers: Please include a valid phone number with shipping ... moreinstructions to avoid shipping delays and lost shipments. If a Buyers international shipment is deemed undeliverable. Lost or delayed and you did not supply a phone number, your purchase will be forfeited and no refunds will be issued. Buyer is responsible for all shipping charges, duty and V.A.T. charges. Terms of Sale Payment in full is expected within 7 days from date of purchase. Any purchases not paid for in full within the 7 day time period will be cancelled. And the item(s) will be re-listed for sale. Unless otherwise stated, all Electrical and Mechanical Components carry a 7 day warrantee. If any item guaranteed by us is not in working condition, return it to us freight prepaid within 7 days of receipt and your full purchase price will be refunded. We are not liable for any consequential damages, loss or expense arising in connection with use of or the inability to use goods for any purpose whatever. Our maximum liability shall not in any case exceed the contract price for the goods claimed to be defective or unusable. Sales Tax State law requires that we charge applicable sales tax on orders shipped to addresses in the state of Michigan. 6.00% sales tax applies to
|
|
|
FANUC AC spindle motor A06B-1008-B100 model 8
FANUC AC spindle motor A06B-1008-B100 model 8
|
|
|
FANUC A06B-0706-B001 AC SPINDLE MOTOR
FANUC A06B-0706-B001 Model 8 AC SPINDLE MOTOR 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13f2520db1a-0xe2-
|
|
|
FANUC AC SERVO MTR A06B-0531-B002 2500P A860-0304-T112
FANUC AC SERVO MTR A06B-0531-B002 2500P A860-0304-T112-Good condition-7 Days exchange warranty* To avoid shipping charges. We can ship directly to the customers FedEx or UPS account, when the customer provides us with the following information: Address, Phone number and their account number. Any question's. Feel free to contact Sam Nesh at(818) 888-2227 or via email at sam.nesh@sbcglobal.net On Dec-16-10 at 16:45:13 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. On Dec-16-10 at 16:45:15 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
FANUC Gettys Permanent Magnet DC Servo Motor 10-2000 H
FANUC Gettys Permanent Magnet DC Servo Motor 10-2000 H
|
|
|
Fanuc Pulsecoder TYPE A860-0356-X011 8 A860-0365-V501
Fanuc Pulsecoder TYPE A860-0356-X011 8 A860-0365-V501
|
|
|
NUMERIC AC SPINDLE MOTOR, MODEL 65, A06B-0754-B600
WISCONSIN METALWORKING MACHINERY INC. USED METALWORKING MACHINE ID: 8766 NUMERIC AC SPINDLE MOTOR TYPE: A06B-0745-B600#2000 NO-U-940745 1989 125 LBS TEMPORARY SPECIFICATIONS SUBJECT TO VERIFICATION CONDITIONS OF SALE TERMS: Cash. Check. Pay Pal, or wire transfer with order. Unless otherwise stated. Payment prior to shipping. WARRANTY: The goods described herein are preowned used goods and are offered“as is” where is” unless otherwise noted herein, SELLER MAKES NO WARRANTIES OF ANY KIND WHATEVER, EXPRESSED OR IMPLIED, OR MERCHANT-ABILITY AND FITNESS FOR A PARTICULAR PURPOSE. All specifications and description of said goods are approximate only. It is the Buyers responsibility to inspect the goods and ascertain if the specifications. Description and condition of the goods conform to Buyer’s requirements. MACHINE USE AND SAFETY: Buyer acknowledges ... morethat the goods described herein are preowned used GOODS WHICH WERE NEITHER DESIGNED NOR MANUFACTURED BY THE seller. Nor has the Seller knowledge of, or control over the prior use or misuse of said goods, nor does the Seller have knowledge or control over the future application of these goods by the Buyer. It is the Buyer’s(user’s) responsibility to provide proper safety devices. Equipment and instructions for any particular use and to take all necessary steps to conform to all federal, state or local government safety standards including OSHA. INDEMNIFICATION: Buyer agrees to indemnify. Hold harmless and defend Seller of and from any and all claims, liabilities and damages from any accidents or other incidents involving the goods described herein. If sold with an MDNA 30-Day Return Privilege. We will accept any machinery and equipment. Freight prepaid, for refund of the purchase price if proven mechanically unsatisfactory; or repair at dealer's option.
|
|
|
NICE ORIGINAL ATLAS LATHE 1/2 HP 1725 RPM BALL BEARING FORWARD REVERSING MOTOR
Very Nice running Original Atlas 1/2 HP. 110/220 volt. Single phase, 1725 rpm, forward/ reversing ball bearing motor. Unit is prewired for 110 volt. This is original equipment for the Atlas 10" lathe and 7" Metal Shaper. Motor has a 34" cord from motor to control box, a 39" cord from control box to on/off switch. 110 volt cord and cord cap are 67" long. Motor shafts are 1 3/8" long, 1/2" diameter with flats. Bolt mounting pattern is 4 3/8" to 6 1/8" front to back slot. 5 1/4" side to side on center. Control relay was mounted in a fabricated enclosure. I would suggest mounting it in an approved electrical enclosure. There is a toggle switch on the side of the enclosure, which is three position, forward and reverse with a center off position. Very nice running bolt on installation. Motor was ... moretested and ran cool and quiet. Nice original motor. Always combine shipping- If you are planning to purchase more than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
DELTA ELECTRIC 115 V .3 HP MOTOR PART NUMBER 1341565
DELTA ELECTRIC 115 V.3 HP MOTOR PART NUMBER 1341565. SEE PHOTOS WITH BOX INFORMATION. SOME AGE. HAS BEEN IN STORAGE FOR SOME TIME AND APPEARS TO HAVE NOT BEEN USED. LOOKS LIKE NEW OLD STOCK.
|
|
|
GE Fanuc AC SERVO MOTOR A06B-0512-B001
GE FANUC AC SERVO MOTOR Type- A06B-0512-B001
|
|
|
OKUMA servo motor BL-MS50E-30T, BLMS50E30T w/o encoder
Up for sale is 1 OKUMA servo motor BL-MS50E-30T. This servo motor is used. But in perfectly good working condition. It's been professionally removed from working Okuma VR-40 machining center, which my customer no longer needed and I bought it for parts. If you need more pictures, please request it and I will e-mail you right away. Please. Ask all the questions you may have before bidding. I will not accept returns on this item. Unless it's delivered and installed by me or my employee( service charges will apply) I am a professional Okuma service man. I owned and operated my own CNC Service company since 1999 and my reputation is my business. I have lots of Okuma parts in stock at any time. Most parts are new. Some are used. Electrical parts: servo motors, drives, control panels, power supplies, boards, encoders, pulse handles, limit ... moreand prox. switches, motor starters etc. Mechanical parts: pulleys, belts, ballscrew/motor shaft couplings etc. If you have any questions about this auction or need any other Okuma parts, please e-mail me or call(248)705-6712. Please check my other eBay auctions and my store inventory. Thank you.
|
|
|
Yaskawa Yasnac AC SERVO MOTOR USAFED-20-HS31
Yaskawa Yasnac AC SERVO MOTOR USAFED-20-HS31 Serial# S32477015-008 Date: 93 Inventory# 4015. Return Policy: We warranty all new items for 30 days unless specified. We can't warranty items that are used Shipping: Shipping price is for all states except Hawaii and Alaska. Will ship international. Please contact us before purchasing for approximate internaional shipping costs. Please contact us with any questions about this item or items that you are looking for. We are constantly adding new inventory. Our goal is complete customer satisfaction. Our items are"as is. however we strive to make every customer happy and satisfied with quality products and service. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f313f8333-0x105-
|
|
|
SIEMENS POWER INTERFACE BOARD ( R15EO2A174 ) R70E01-174
THIS IS A USED IN GOOD CONDITIONSIEMENS POWER INTERFACE BOARD( R15EO2A174) OTHER NUMBER ON BACK OF BOARD R70E01-174 check my store for other great deals.
|
|
|
Gould Gettys Servo Motor M235-H60A-900P
Gettys Gould servo motor M235-H60A-900P. This motor has been taken off of a running machine and is in good working order. The specs are my pictures but if you have any questions please feel free to ask. This item is listed for sale locally as well so i reserve right to end the auction. Shipping is flat rate $80.00 This is because the motor will have to be crated and shipped either ups or freight depending on weight. Take a look at the rest of are listings. Looking for something specific email us. Services available. Install, Trouble shooting general maintenance. Feel free to email with any questions. THANKS FOR LOOKING Posted with
|
|
|
SIEMENS SPINDLE AMP ( C98043-A1046-L )
THIS IS A USED IN GOOD CONDITION SIEMENS SPINDLE AMP( C98043-A1046-L) check my store for other great deals.
|
|
|
Fanuc Power Cable for Servo Motor NOS
Fanuc Power Cable for Servo Motor NOS Part No. 44C741938-001R01 This is a six conductor cable with plug down to four conductor at the control end as shown in photos. This is a stock Fanuc cable that has never been installed. Inv.20463_Inv.20464) We also have sales brochures and literature for many different kinds of machines. Due to a lower demand for these. We don't list them on ebay, but feel free to email us with any requested machine models and we'll check our files. Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges ... morepaid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. V
|
|
|
Fanuc Control Cable for Servo Motor NOS
Fanuc Control Cable for Servo Motor NOS Includes RS type plug on control end and 17 pin right angle round Amphenol connector on motor end(see photos) Part No. 44C741938-001R01 Control end plug is sheathing it is incomplete. This is a stock Fanuc cable that has never been installed. Inv.20462) We also have sales brochures and literature for many different kinds of machines. Due to a lower demand for these. We don't list them on ebay, but feel free to email us with any requested machine models and we'll check our files. Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Also: Skidding/Crating of items are extra costs. ... moreThis is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 surcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Ship
|
|
|
FUJI CIRCUIT BOARD ( F930 78 10 ) (2)
THIS IS A USED IN GOOD CONDITION FUJI CIRCUIT BOARD( F930 78 10) 2) check my store for other great deals
|
|
|
Rexroth Indramat MHD041B-144-PP1-UN, 280213R, 7,000 RPM Motor w/brake rebuilt
Rexroth Indramat MHD041B-144-PP1-UN. 280213R. 7.000 RPM 24 V DC brake Rebuilt by Rexroth location: S9
|
|
|
Baldor EM2515T Super E Motor 20hp 230/460V 3 Phase 47/23.5A Used**
Baldor EM2515T Super E Motor 20hp 230/460V 3 Phase 47/23.5A Used* Left Side: Right Side, Manufacturer: Baldor Model: EM2515T Description: Super E Motor 20hp 230/460V 47/23.5A 60Hz 3 Phase 1765rpm Frame: 256T Shaft Length: 4 1/4in Shaft Diameter: 1 5/8 Rotation: Unknown Condition: Used. Has Wear and Scuffs Package Condition: No Packaging*This item is not eligible for combined shipping. NMFC: 62120-02 Class: 77.5 Weight with Pallet: 243 Includes: Baldor EM2515T Super E Motor Packaging Condition: No Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales ... moreTax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Shipping is via LTL Freight The winner of the item needs to request an invoice from us. And include the following information for an accurate shipping cost: Is the item being shipped to a business or a residence? If your business is in your residence you will still be charged the residential delivery costs. What is the business name and address? Or. What is the zip code to your residence? Do you have a loading dock or forklift? What is your phone number? Picking up your item from will-call at the carrier's terminal can be cheaper than shipping to a residence. Please let us know if this is an option you would like more information on. Combined Shipping Combined Shipping is not available for this item. Local Pickup We offer local pickup for our customers who want to save money and not pay for shipping. Pickups are at 431 N Wright Brothers Drive. Salt Lake City, Utah 84116. Please be aware that while you will not be paying for shipping costs. You will be paying a Utah State Sales Tax of 6.85% Items must be picked up within 5 business days of when they are available. If you
|
|
|
Craftsman 3/4 HP Capacitor Motor
Craftsman 3/4 HP Capacitor Motor Item Title Craftsman 3/4 HP Capacitor Motor Description This is an awesome ¾ Horsepower capacitor motor made by Craftsman. This item wasnt able to be tested and unsure if it works. Sold as is! Please bid accordingly! Dimensions 13 x 7 x 8 Condition Used. This item wasnt able to be tested and unsure if it works. Sold as is! Please bid accordingly! Please carefully review photos for items general condition. Information on Shipping Item will ship UPS Ground from our facility. Unfortunately. We do not offer International Shipping at this time! Local Pickup is an option on any purchase. After youve won the auction and paid for your item contact us to schedule a pickup time. Please take note: our business hours are Monday to Friday 8 AM PST to 4:30 PM PST. All messages will be responded to within 1 business ... moreday. If youre unhappy with your purchase or transaction. Please do not leave negative feedback. We will do our best to resolve the issue! Our Business is Changing Lives! Your purchase helps to create jobs and change lives in Sacramento Valley& Northern Nevada. We thank you for your support! Another auction from Goodwill Industries Sacramento. Powered by 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13f3c171823-0xff-
|
|
|
Fanuc 10M DC Servo Motor, A06B-0651-B5011, Used
This motor came off of a TAKISAWA MAC-V2E machining center witch had other issues. So we removed the servo motors and scraped the machine. This motor was still functioning like it should when removed from the machine. In good cosmetic condition some scuffs and scratches. Thanks for looking. As is.
|
|
|
Anilam 1100/1100M DC servo motor, great condition! part # 37000117
This is an Anilam DC servo motor for 1100 systems. The part# is 37000117. I am thinning down some of my spare parts. This is a good working and looking servo motor!
|
|
|
DAYTON 1/60hp PERMANENT-SPLIT CAPACITOR GEAR MOTOR
aims DAYTON 1/60hp PERMANENT-SPLIT CAPACITOR GEAR MOTOR read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Dayton. This is a used Permanent-Split Capacitor Gear Motor in working condition. Model# 4Z062A Specifications: Arbor Diameter: 1/2" Ratio: 108.6. Torque: 67 in.lbs. Horsepower: 1/60. Volts: 115. Phase: 1. Overall Dimensions: 10" x 10" x 4-1/2" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DAYTON 1/60hp PERMANENT-SPLIT CAPACITOR GEAR MOTOR DAYTON 1/60hp PERMANENT-SPLIT CAPACITOR GEAR MOTOR ... moreDAYTON 1/60hp PERMANENT-SPLIT CAPACITOR GEAR MOTOR Reliable Tool Inc. c 2011 | Powered by
|
|
|
1921 Lafayette Motors Co. 4 Vintage Auto Print Ads Mars Hill Indianapolis
1921 Lafayette Motors Co. 4 Vintage Auto Print Ads Mars Hill Indianapolis 1921 Auto Magazine Advertising 1921 Lafayette Motors Co. 4 Vintage Auto Print Ads Mars Hill Indianapolis. You Have Always Known There Would Be Such A Car. The best Lafayette advertisements are never published in any magazine or newspaper. They are the words of praise free-spoken by those who have driven this car. Lafayette. This cameo. Which is mounted on the radiator of every Lafayette, is the seal we place upon our work in witness that we have held fast to our purpose. We had Supposed- that. As time went on, we should lose inevitably a little part of the earnestness with which we began our work. Lafayette. We have undertaken to build the very finest car that we can. Lafayette Open Cars $5625 at Indianapolis. Vintage automotive display magazine advertising from the ... moreNational Geographic Magazine. Use your imagination to decorate that special spot in your home with a several related ads(check out our other current listings) Create a theme with different size or color frames. These are the actual old ads, not reproductions or copies. Full page ads measure about 6" by 10" and are in good condition, better than the scanner can show. We'll be as accurate in our descriptions as possible. Everything we offer for sale is used unless otherwise noted. Prompt payment expected within 3 days from the end of the auction. Your shipment will be sent to the address on your Paypal payment statement only! It is the buyer's responsibility to make sure that the name and address information on the Paypal statement is correct. Please take a moment to check out our other listings-you can never tell what you might find! Most items are shipped through the US Post Office. Proper packaging materials are purchased and used in combination with recycled materials for both fragile and non-fragile items. Please remember to ask any questions you may have PRIOR to making your bid. inkfrog terapeak. I000000.
|
|
|
Pair Dayton PSC Gearmotor model 1L555 115/230 AC, 3 RPM HP 1/20
Here is a pair of gear motors. Model Dayton 1L555 These were taken out of service and replaced with a different system entirely a couple years ago and had been sitting in storage. Time to clean up the garage. They were working when taken out of service. I have not tested since. As the motor plate shows these work as wired for 115 or 230 volt. see plate photo for all the details) The motors were wired with a push switch to opperate at the motor drive. the wiring is stilla attatched. Units are about 12 inches long as I recall measureing. Regional shipping can have substantial savings- please wait for an invoice. Again stored and not tested since- sold as-is.
|
|
|
Okuma Servo Motor # BL-80E-20T, Encoder Okuma #,OSP, Used, WARRANTY
Title: Okuma Servo Motor# BL-80E-20T. Encoder Okuma#OSP, Used Description: Our Internal Stock# 3-D6-13(6-18-13 dale) You are about to purchase the following item: 1- Okuma Servo Motor# BL-80E-20T. Encoder Okuma#OSP, Used Catalog# BL-80E-20T S/N 86441743. Date: 1986.10. Okuma Ecoder# OSP 1.5 kW 157 Volt 7.5 Amp 2000 RPM Ins Class F. MADE IN JAPAN This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based ... moreon buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and payed for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms.
|
|
|
GE FANUC A06B-0852-B200 AC SPINDLE MOTOR, 3.7 kW, 3 PHASE
Inventory Number: 01131620041 Manufacturer: Description: GE FANUC A06B-0852-B200 AC SPINDLE MOTOR. 3.7 kW, 3 PHASE Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, 4 POLE, 3 PHASE, 3.7 kW, 110-216 VAC, 1500-8000 RPM, MOTOR IS DIRTY-SEE PICTURES, 1" SHAFT DIAMETER, 2-1/4" SHAFT LENGTH, REMOVED FROM A MACHINE BEING SCRAPPED, WIRES CUT FROM REMOVAL. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The ... moreinvoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement
|
|
|
FANUC A860-0304-T111 2000P PULSE CODER A8600304T111 A-016942
FANUC A860-0304-T111 2000P PULSE CODER A8600304T111 A-016942_
|
|
|
Rebuilt Yaskawa AC Spindle Motor UAASKA-19CZ3 18.5/15KW 200V
Rebuilt Yaskawa AC Spindle Motor UAASKA-19CZ3 18.5/15KW 200V Rebuilt Yaskawa AC Spindle Motor Type: UAASKA-19CZ3 BRG No. 6310M2ZZAC3P6Q Phase 3 Poles: 4 18.5/15KW Rating: 30min/cont r/min: 1500/6000 Amp: 96/82 200V 60 Day Guarantee Will Ship Freight from Harrison. OH 45030 Location = PRH A1Floor TOYOTA ACR inkFrog Analytics. Shipping Payment Return Terms About us If you need same day shipping- CALL 513-349-4119. We understand that sometimes urgent deliveries are needed and normal parcel services wont do. Almost all other parcel shipments are shipped within 24 hours of received payment. If you need a freight quote please contact us at the number above. All products are professionally packaged or crated for safe delivery! Payment is expected upon checkout completion. IF you need more time to make a payment. Please contact us. If payment is ... morenot received within 7 Days we must begin an Unpaid Item Dispute. All return policies details are covered in each listing. Please contact us if you receive an item that does not function correctly or is not described properly. Designed by ANITemplates
|
|
|
GE FANUC A06B-0315-B202 # 7000 AC MOTOR FANUC 10S
GEFANUC A06B-0315-B202 A06B0315B202 AC MOTOR MODEL 10S
|
|
|
FANUC AC SERVO MOTOR WITH RED CAP B002
FANUC AC SERVO MOTOR RED CAP B002-Good condition-7 Days exchange warranty* To avoid shipping charges. We can ship directly to the customers FedEx or UPS account, when the customer provides us with the following information: Address, Phone number and their account number. Any question's. Feel free to contact Sam Nesh at(818) 888-2227 or via email at sam.nesh@sbcglobal.net On Dec-16-10 at 16:45:13 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. On Dec-16-10 at 16:45:15 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
FANUC DC SERVO W/ BRAKE MODEL 10 A06B-0651-B012 2000 P
FANUC DC SERVO MOTOR WITH 90 VDC BRAKE MODEL 10 A06B-0651-B012 W/ 2000 P-Good condition-7 Days exchange warranty* To avoid shipping charges. We can ship directly to the customers FedEx or UPS account, when the customer provides us with the following information: Address, Phone number and their account number. Any question's. Feel free to contact Sam Nesh at(818) 888-2227 or via email at sam.nesh@sbcglobal.net On Dec-16-10 at 16:45:13 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. On Dec-16-10 at 16:45:15 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f7e1dd47b-0xff-
|
|
|
FANUC AC SERVO MTR A06B-0531-B002 2000P MODEL 10
FANUC AC SERVO MTR A06B-0531-B002 2000P MODEL 10-Good condition-7 Days exchange warranty* To avoid shipping charges. We can ship directly to the customers FedEx or UPS account, when the customer provides us with the following information: Address, Phone number and their account number. Any question's. Feel free to contact Sam Nesh at(818) 888-2227 or via email at sam.nesh@sbcglobal.net On Dec-16-10 at 16:45:13 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. On Dec-16-10 at 16:45:15 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
FANUC MTR MODEL 5 A06B-0314-0569 2500P A860-0304-T112
FANUC AC SERVO MTR A06B-0314-0569 2500P A860-0304-T112-Good condition-7 Days exchange warranty* To avoid shipping charges. We can ship directly to the customers FedEx or UPS account, when the customer provides us with the following information: Address, Phone number and their account number. Any question's. Feel free to contact Sam Nesh at(818) 888-2227 or via email at sam.nesh@sbcglobal.net On Dec-16-10 at 16:45:13 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. On Dec-16-10 at 16:45:15 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
Sumitomo 1.5 HP AF Motor TC-FV-FB-3B _ CNHMS1H-4115YB
Our internal inventory number is 8T#67-D-1-J To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! You won't want to miss any of our $.01 NO RESERVE auctions! OR. You are bidding on a unit we just got in with a group of spares from a fortune 500 crib. It is a Sumitomo 1-1/2 HP AF Motor Model#TCFVFB3B. Then you have the SM-Cyclo tag which is#CNHM51H-4115YB-AV-B-59. 1.5 HP, Class 2. This unit appears to be USED and then sent out for repair/ rebuild with a tag. It is 22" Long x 12" x 9.5" weight is 105 Lbs, so it should go freight. Looks ready to roll! SEE PICS FOR MORE SPECS. NOTE* Top Bidder to pay $30.00 Skidding& Handling Charge PLUS shipping costs from Zip 49534! For payments over $250.00 we ... moreprefer Paypal or USPS Money Orders. But will accept other forms of certified funds and company checks(non certified checks held 10 business days for clearance) Good Luck& Good Bidding! OUR RETURN POLICY. We are a WHOLESALER of all types industrial equipment! Usually when you purchase items from us you will be getting anywhere from a 25% 50% discount from what fair market value would be from a used machinery dealer. We will gladly stand behind what we sell. But because of the LOW MARGINS we work with and extraordinary deals we pass on, we can not offer partial refunds on ANY SALES! We gladly offer a 30 day NO QUESTIONS ASKED return priviledge. This is a 100% refund of your WINNING EBAY BID, you are responsible for ALL Packaging and Shipping costs! Good Luck. All purchases made MUST BE paid for within 10 business days of auction end.
|
|
|
IKEGAI FANUC FUJITSU DC Motor 0 Type: A06B-0613-B031
Wow! Great looking! IKEGAI FANUC FUJITSU DC Motor 0 Type: A06B-0613-B031 Up for bidding one DC MOTOR IKEGAI FANUC FUJITSU DC Motor 0 Type: A06B-0613-B031 Here is a complate DC Motor For more info on motor specification please see pitures Come with very items you see. used but in good working condition APPROXIMATE WEIGHT. 30 LBS local pick up OK it is over 30 Lbs from zip. 91706 Local pick up OKAY if need to ship please add a $20.00 for packaging and handling Bid with confidence- Check My feedback Any question 626 536 6202 Thanks for being happy buyer“MAY GOD KEEP ON BLESSING AMERICA” High bidder to secure own shipping including quotes. Please have your freight company Email Me a completed prepaid"bill of laden" and all necessary paperwork to mikemolina@roadrunner.com For quote info: 40 x 48 x 20" high and is abouth xxx Lbs ... moreFrom Zip Code 91706 freightquote com or call 1.800.323.5441 ext.1588 check with Mr. Jose Please! Check My feedback.PREFERABLY” 1st Option“Company Check” or Cashiers Check OK. 2nd Option $500.00 thru PayPal. Balance thru“Company Check” or Cashiers Check. Thanks MKM
|
|
|
OKUMA servo motor BL-MC300E-20SB with brake BLMC300E20SB
Up for sale is 1 OKUMA servo motor BL-MC300E-20SB. This motor is used. But in perfectly good working and cosmetic condition. It was professionally removed from working Okuma machine, which I bought from my customer for parts. It's been cleaned and tested again under load in our lab. If you need more pictures or have questions, please, e-mail me or call(248)705-6712 and I will respond right away. Please. Ask all the questions you may have before bidding. I will not accept returns on this item. Unless it's delivered and installed by me or my employee( service charges will apply) I am a professional Okuma service man. I owned and operated my own CNC Service company since 1999 and my reputation is my business. I have lots of Okuma parts in stock at any time. Most parts are new. Some are used. Electrical parts: servo motors, drives, control ... morepanels, power supplies, boards, encoders, pulse handles, limit and prox. switches, motor starters etc. Mechanical parts: pulleys, belts, ballscrew/motor shaft couplings etc. If you have any questions about this auction or need any other Okuma parts, please e-mail me or call(248)705-6712. Please check my other eBay auctions and my store inventory. Thank you. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13f7e1dd426-0xf4-
|
|
|
FANUC AC SPINDLE MOTOR A06B-1375-B392#0F41
AC FANUC SPINDLE MOTOR@LB/15000 A06B-1375-B392#0FF41 IT HAS WIRE JUNTION BOX COVER MISSING k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13f838878ef-0xfe-
|
|
|
Siemens drive motor #1HU5040-0AF02-Z
Siemens drive motor#1HU5040-0AF02-Z This is the X drive off a Hardinge CHNC2- worked when removed. Guaranteed not DOA This came off a CHNC that only cut graphite I am Parting out. Email with any requests for parts.
|
|
|
GETTYS / FANUC DC SERVO MOTOR - 1,500 RPM - TYPE A06B-0601-B031
GETTYS/ FANUC DC SERVO MOTOR- 1.500 RPM- TYPE A06B-0601-B031 THIS MOTOR HAS NEVER BEEN USED IN INDUSTRIAL APPLICATION: ONLY IN A LAB CONDITIONS FOR A SHORT TIME! WE WILL QUOTE INTERNATIONAL SHIPMENT
|
|
|
1971 Cummins Marine Diesel NT-280-IF
1971 Cummins Diesel 6 cylinder motor. This has been outside for 2 years and don't know if it runs. It was in a flooded area with fresh water and did get water damaged. The engine was drained and cleaned and was supposed to have run. But not sure. This is for parts or restore condition, because a valve/cylinder cover was left off and water may have gotten back in. No shipping, No Warranty, parts or repair. Only listing this weekend, if it doesn't sell, I will be parting this out. No Reserve, will be sold to highest bidder. No shipping and buyer is responsible for all arrangements for pick up. Posted with
|
|
|
Rblt Sanyo Denki Super Driver Servo Motor CN-1000T-10 120 V 1000 RPM
Rblt Sanyo Denki Super Driver Servo Motor CN-1000T-10 120 V 1000 RPM Rebuilt Sanyo Denki Super Driver Servo Motor Model: CN-1000T-10 CN1000T10 120 V 1000 RPM 7 V/Krpm 60 Day Guarantee Location = PRH A6Floor TOYOTA ACR Shipping Payment Return Terms About us If you need same day shipping- CALL 513-349-4119. We understand that sometimes urgent deliveries are needed and normal parcel services wont do. Almost all other parcel shipments are shipped within 24 hours of received payment. If you need a freight quote please contact us at the number above. All products are professionally packaged or crated for safe delivery! Payment is expected upon checkout completion. IF you need more time to make a payment. Please contact us. If payment is not received within 7 Days we must begin an Unpaid Item Dispute. All return policies details are covered in each ... morelisting. Please contact us if you receive an item that does not function correctly or is not described properly. Designed by ANITemplates
|
|
|
NICE GE 1/2 HP 1725 RPM FORWARD REVERSE MOTOR & PREWIRED SQUARE D SWITCH 4 LATHE
Nice- Original General Electric 1/2 HP. Capacitor Start, 115 volt, single phase 1725 RPM forward/ reversing motor with prewired Square D switch and reset button on motor. Unit is prewired for 110/120 volt. Motor has a 25" metal armored cord from motor to Square D forward and reverse switch. 110 volt cord and cord cap are 57" long. Motor shaft is 2" long. 5/8" diameter with keyway. Bolt mounting pattern is 3 5/8" to 6 1/8" front to back slot. 3" side to side on center. Very nice running bolt on installation. Motor was tested and ran cool and quiet. Wiring and motor switch appear to be new. The metal armor cable spiral pulled out in one location. You can see it in the center of the length. It probably can be put back in its place. No damage at all to wires. Always combine shipping- If you are planning to purchase ... moremore than one item please do not pay until I invoice accordingly with combined shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Caterpillar Gas Industrial Engine G3412
Hi. We are looking to sell a good second hand Cat gas eng 3412-SI as used on Gas Gensets. Caterpillar Gas Industrial Engine G3412 TA-90 HCR 675hp@ 1800rpm 525hp@ 1400rpm. V12 4-Stroke-Cycle Gas Engine built 1997 Inspection welcome. We can ship it anywhere(at purchasers cost) all reasonable travel expenses to inspect refunded on purchase. Phone Robert or Cully +64-9-526-5134 or fax +64-526-5135 New Zealand is 18 hours ahead of the US. If your calling. Your late afternoon is our new morning. VGC Very Good Condition Caterpillar Turbo G3412 gas industrial engine. Was used in development of prototype gas compressors. Engine Model 3412-SI Serial Number 7DB00322 Arrangement Number 2W5734 Specifications: V-12. 4-Stroke-Cycle Gas Bore-in(mm)5.4(137) Stroke-in(mm)6.0(152) Displacement-cu in(L)1.649(27) Compression ratio…HCR 10:1 Gas Pressure Requirements ... morepsi bar. 20(1.4) Lube Oil Capacity-gal(L)50(189) Turbocharged-Aftercooled. Continuous Rating BHP TA-130 HCR 600@ 1800 rpm and 465@ 1400 rpm. Length-in(mm)80.7(2049) Height-in(mm)68.3(1734) Width-in(mm)63.1(1603) Weight-Lb(kg)4720(2143) Purchaser to pay shipping costs. We can arrange transportation to anywhere overseas.
|
|
|
Falk Drive with motor, chain and sprocket.
Used-Falk Drive. Direct Motor 75 HP 3/60/230-460V/ 1100 RPM, Chain and sprocket driven, Chain and sprocket included. This was previously used as a drive on a Littleford mixer. Seller will load on flatbed truck or Common Carrier. Any preparation for shipping such as skidding or crating will be extra and quoted at the time of purchase. Buyer is responsible for all freight cost to their plant. If unit is returned it must be sent to location it shipped from originally. Return freight is for the buyers account. Refund will be made less any unpaid shipping cost when unit is returned is same condition as received. Equipment is listed from other sources. Confirmation of sale is required from seller to finalize sale. All equipment is offered subject to prior sale or disposition.
|
|
|
getty fanuc A06B-0601-B031 model 10 dc servo motor
getty fanuc A06B-0601-B031 model 10 dc servo motor
|
|
|
Rblt GE Fanuc AC Spindle Motor A06B-0853-B300 #3000 1500-8000 RPM 23-29 Amps
Rblt GE Fanuc AC Spindle Motor A06B-0853-B300#3000 1500-8000 RPM 23-29 Amps Rebuilt GE Fanuc AC Spindle Motor Type: A06B-0853-B300#3000 A06B085B300#3000 Model: Alpha 3 1500-8000 RPM 23-29 Amps 156-220 Volts Phase 3 3.7-5.5 kW 4 Poles 60 Day Guarantee Location = PRH C2Floor TOYOTA ACR Shipping Payment Return Terms About us If you need same day shipping- CALL 513-349-4119. We understand that sometimes urgent deliveries are needed and normal parcel services wont do. Almost all other parcel shipments are shipped within 24 hours of received payment. If you need a freight quote please contact us at the number above. All products are professionally packaged or crated for safe delivery! Payment is expected upon checkout completion. IF you need more time to make a payment. Please contact us. If payment is not received within 7 Days we must begin an ... moreUnpaid Item Dispute. All return policies details are covered in each listing. Please contact us if you receive an item that does not function correctly or is not described properly. Designed by ANITemplates 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13fe8b1727f-0xf8-
|
|
|
Fanuc 10M DC Servo Motor, A06B-0651-B212 #0006 (2500M), Used, WARRANTY
Title: Fanuc 10M DC Serve Motor Description: Our Internal Stock# D23-10(5/6/13 dan) You are about to purchase the following item: Catalog# A06B-0651-B212#0006 2500 M Model 10M Serial# B-511331 Date- 85.10 Torque Cont. Stall- 12 Nm Amp Cont. Stall- 12 Amp 165 V 1500 RPM Insulation Class H Excit Perm Magnet Amb Temp 40 degrees C This Unit came off an Hitachi Seiki HC-400 Machining Center This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping ... moreInfo: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and payed for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purcha
|
|
|
SCOTT MOTORS PERMANENT MAGNET MOTOR - 90 VOLTS
aims SCOTT MOTORS PERMANENT MAGNET MOTOR- 90 VOLTS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the USA by Scott Motors. This is a used Permanent Magnet Motor. Motor model# 2BB-01402 Specifications: Spindle Arbor/ Shaft: 5/8" K. 1/3 HP 2400 RPM. 3.1 Amps. 90 Volts. Insulation Class: 105A-A1. Mount: 56CB. Overall Dimensions: 6-1/2" x 10" x 7" Tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. SCOTT MOTORS PERMANENT MAGNET MOTOR- 90 VOLTS SCOTT MOTORS PERMANENT MAGNET MOTOR- 90 VOLTS SCOTT MOTORS ... morePERMANENT MAGNET MOTOR- 90 VOLTS Reliable Tool Inc. c 2011 | Powered by
|
|
|
DAYTON 6K727R HEAVY DUTY 1 HP ELECTRIC MOTOR
aims DAYTON 6K727R HEAVY DUTY 1 HP ELECTRIC MOTOR read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Dayton. This is a Heavy Duty 1 HP Electric Motor in good condition. Model# 6K727R Specifications: Shank: 5/8" Cycles: 60. Volts: 115/ 230. Amps: 14.0/ 7.0. RPM: 1725. Phase: 1. Overall Dimensions: 8" x 10" x 9" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DAYTON 6K727R HEAVY DUTY 1 HP ELECTRIC MOTOR DAYTON 6K727R HEAVY DUTY 1 HP ELECTRIC MOTOR Reliable Tool Inc. c 2011 | Powered ... moreby
|
|
|
USED OPTICAL SHAFT ENCODER, TAMAGAWA SEIKI TYPE RT-5XB-11
Payment Terms: We will under no circumstance ship an item when payment has not cleared or the item has not yet been paid for. All items MUST be paid for within 7 days. If an item is not paid for within 7 days we will open an unpaid item case through eBay to cancel the transaction. Please note that all units are sold in as-is condition with no warranties or guarantees. We offer a 14 day return policy from the date on the invoice on all items. With this return policy you have 14 days from the date of invoice to return the unit if it is found to be defective. Please contact us directly to let us know you will be returning the defective unit. Once we receive the unit and have verified it is in the same condition as when we shipped it. We will issue a refund for the unit price only back to the same method of payment. All refunds will be for the ... moreprice of the defective unit ONLY and do not include shipping charges. Alterations or removal of any components off an item voids the 14-day return policy. Please note that most of our equipment is in used condition and we offer this 14 day return policy so you have the opportunity to test the unit and make sure it is the condition you expected. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-140370ad22b-0xf6-
|
|
|
ROTARY CONVERTER SINGLE PHASE TO THREE PHASE 3.7/5.5 kW CONT/30 MIN
Complete. Tested and working converter. Large and heavy, we will pallet it up at Burlington WI 53105 for pickup. 230V 60 FLA. Amps No Load = 10 Rated 3.7/ 5.5 kW Cont/ 30 min.
|
|
|
BRIDGEPORT 1HP 3PH SPINDLE DRIVE MOTOR W/ PULLEY 's & FWD/REV SWITCH
BRIDGEPORT 1HP 3PH SPINDLE DRIVE MOTOR W/ PULLEY's& FWD/REV SWITCH You are bidding on a used motor for a Bridgeport J head. This motor has tested and found to be in good working order. A 30 day return privilege is offered with the purchase of this motor. Shipping can be UPS or it can be picked up locally in Shelton. CT. SPEC 50Hz 200V/4.0A. 380V/1.9A 60Hz 230V/3.8A. 230V/3.0A, 460V/1.65A Tropical Insul: CL.B Frame: 56-12 RPM 1420/1730 Type: JV Design: B Code: L Serial: 1-19-0161 Model: F-362-01-998. MFG: US Electric Motor This motor comes with a 30 day return privilege. Shipping can be UPS or it can be picked up locally in Shelton. CT. 30 Day Unconditional Warranty(must return freight prepaid) Check our Store and other Auctions for more great buys. Tag I.D. 7-18-13-5
|
|
|
Setco 6105 Vertical Motorized Spindle
Make: Setco, Model# 6105G Lubrication 3.4HP 314V 3 Phase 41 Hz 7A 820 rpm/min 5.0HP 460V 3 Phase 60 HZ 7A 1200 rpm/min Mounting: Vertical Nose Up Rotation: C.C. W. Rear, This lot is used(except when noted) Unit sold as-is. Where is. Buyer is responsible for freight and any skidding/crating that is required. If you require assistance arranging freight. Please contact us at(508) 646-2744- Payment is required prior to shipment. Please make sure to ask all of your questions prior to bidding. All items purchased must be paid for in full within five(5) days of the eBay sale date. Items not paid for in full within this timeframe may be relisted for sale at Surplus Solutions’ discretion. All items purchased must be picked up within ten(10) days from the eBay sale date. Unless given specific permission to extend the time. If the buyer has not picked ... moreup their purchases within that time frame, the buyer will be subject to additional storage charges that must be paid prior to the release of the equipment. Any purchases paid for and not picked up with thirty(30) days of the eBay sale date will be considered abandoned property and the equipment will no longer be available to the purchaser. We buy and sell process Equipment every day. Therefore. All items are subject to prior sale. We do our very best to immediately end the listing for any item that has been sold. For additional information or photos, please contact us at(508) 646-2744. Please Visit Surplus Solutions on the web to view all of our available equipment. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-1403f822d04-0xfd-
|
|
|
1 USED MITSUBISHI SJ-P2.2AM AC SPINDLE MOTOR
Welcome to Canarsky& Daughters. We are here to sell these items. We are looking forward to doing business with you. So have fun browsing and buying. Reasonable offers are always welcomed. SEARCH OUR STORE BY CLICKING HERE! ATTN: Please read all of our updated terms and conditions posted below before bidding. If you have difficulty with these terms. Please write us with your concern. By placing your bid. You accept these terms and agree to abide by them. THIS LOT CONSISTS OF: 1 USED MITSUBISHI SJ-P2.2AM AC SPINDLE MOTOR. S1 CONT:1.1 KW. 1500-6000 R/MIN, S2 10 MIN: 3.7 KW, 1500-3000 R/MIN, 2 POLE, 3 PHASE, MOTOR INPUT: 139-169 VOLT, AMP INPUT: 200-230 VOLT, 50/60 HZ. CONDITION: USED SURPLUS. NO REASONABLE OFFER REFUSED. The approximate shipping weight is 65 lbs. All items are sold"as is" Unless described as"new" above. ... moreItems are used. We do not have the facilities to test most of these items. You are only buying the item(s) pictured/described. ALL TECHNICAL QUESTIONS/PROBLEMS SHOULD BE ADDRESSED THROUGH EBAY CHANNELS FOR THE FASTEST POSSIBLE SERVICE. IF SENT TO OUR EMAIL ADDRESS. YOUR CORRESPONDENCE WILL GO TO THE JUNK FOLDER, AND WILL NOT GET ADDRESSED. Please note. We are not experts in these fields and so may not be able to give you the answers you require. We will, however do our best to find the information you request. THANK YOU FOR YOUR COOPERATION. This item must be settled for immediately. All items not settled for in full will be relisted or sold at our discretion and appropriate feedback will be left. Please be sure to enclose a shipping address(street address) EBay ID number, and preferred shipment method if applicable. The total due is always equal to the total of 1) the agreed amount of the item and 2) the actual shipping costs and 3) a $5.00 domestic. Or a $10.00 international, packaging and handling fee. The complete amount must be SENT VIA PayPal. PLEASE NOTE: The actual shipment of your item(s) may take anywhere from 1 to 10 days depending on such
|
|
|
POTOMAC ELECTRIC MTX4300.CE ? 5/8IN SHAFT DC ELECTRIC MOTOR B233466
Brand: POTOMAC ELECTRIC Condition: Used Model: MTX4300.CE? Type: DC Weight: 16 lbs Dimensions: 10 X 7 X 7 SKU: B233466 Category: Electrical· Electric Motors Additional Notes: 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1407f402642-0x106-
|
|
|
Hydro-Gear HGM-15C-4026 Hydraulic Motor 9.25" Thread Diameter 1"*
Hydro-Gear HGM-15C-4026 Hydraulic Motor 9.25" Thread Diameter 1" Left Side: Right Side, Manufacturer: Hydro-Gear Model: HGM-15C-4026 Description: Hydraulic Motor Condition: Used. Item is dirty and has scratches and scuffs from use and storage. Packaging Condition Details: No Packaging Hydraulic Motor Application: Unknown Overall Length: 9.25" Shaft: 2.75" Thread Diameter: 1" Not Tested No Further Information Found On Item*This item is not eligible for combined shipping. Includes: Motor as pictured and described. Packaging Condition: No Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. To make a direct payment via credit card, please contact us directly ... moreby phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest item + $2 per each additional item(up to 9 additional items) Local Pickup We offer local pickup f
|
|
|
KENT-MOORE J33880 INJECTOR TUBE RECONDITIONING SET DDA SERIE 60
A USED HEAD CYLINDER INJECTOR SLEEVE REPAIR
|
|
|
DAYTON HEAVY DUTY THREE PHASE AC MOTOR # 3N238
aims DAYTON HEAVY DUTY THREE PHASE AC MOTOR# 3N238 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Dayton Motors. This is a Three Phase AC Motor in good condition. Model# 3N238. Specifications: Motor Type: Three-Phase. HP: 2. Speed: 3450 RPM Voltage: 208/ 220. Full Load Amps: 5.4. Shaft Dia: 5/8" Shaft Length: 2" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DAYTON HEAVY DUTY THREE PHASE AC MOTOR# 3N238 DAYTON HEAVY DUTY THREE PHASE AC MOTOR# 3N238 Reliable Tool Inc. c 2011 | Powered by
|
|
|
BISON HEAVY DUTY AC GEARMOTOR # 014-482-2019
aims BISON HEAVY DUTY AC GEARMOTOR# 014-482-2019 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Bison Gear& Engineering Corp. This is an AC GearMotor in good condition. Model# 014-482-2019. Specifications: Motor Type: Gear Motor. HP: 1/2. Speed: 1725 RPM Voltage: 115. Full Load Amps: 7.81. Shaft Dia: 3/4" Shaft Length: 1-1/2" Overall Length: 12" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. BISON HEAVY DUTY AC GEARMOTOR# 014-482-2019 BISON HEAVY DUTY AC GEARMOTOR# 014-482-2019 Reliable Tool Inc. ... morec 2011 | Powered by
|
|
|
NICE 1/2 HP PREWIRED FORWARD REVERSE 1725 RPM MOTOR CONVENIENCE OUTLET 4 LATHE
Very nice- Original Westinghouse 1/2 HP. 115 volt, single phase 1725 RPM forward/ reversing capacitor start continuous duty motor with prewired switch. Pulley and v belt. This was acquired from an electrician. He wired the unit using SJ cord. The wiring from the motor to the male cord cap is 30" in length. This cord cap connects to the Hubble twist lock. The other outlets alongside are for convenience use. Such as a light or accessories, which says powered at 120 volts. The system has a 10 1/2 foot cord for plugging into a standard household plug. The first two photos show the switch and receptical mounted on a pole. The pole is not included in the listing. The motor base mounting configuration is 5" on center side to side. Slot openings run from 4" to 7 3/4" front to back. One outside edge of the motor base has been cut ... moreoff as shown in one of the photos. It does not have an impact at all on mounting. There is a two step pulley on the motor shaft which is 2 1/2" OD. The unit also comes with a V belt which is 43 1/2" long. Outside dimension. An extremely nice set up. Motor runs quiet and cool. Entire system functions very nicely and was wired professionally. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
FADAL CNC 4020 SERVO MTR-0126 MTR0126 GLENTEK GMBF5060-78 AC SERVO MOTOR
FADAL SERVO MTR-0126 MTR0126 GLENTEK GMBF5060-78 AC SERVO MOTOR Was Removed From A Model 4020 CNC Used Good Working Servo Check My Other Auctions For Fadal Parts
|
|
|
SM-Cyclo 5 HP Gearmotors
Matched pair of two like new SM-Cyclo gearboxes with Baldor high efficiency 5 hp TEFC motors. I have two pictures of the gearbox nameplates which show the serial numbers only one number apart. I also have pictures of both output shafts to show that they are in perfect condition. They are 2 3/4" diameter x 3 1/2" long. I will also include the shaft keys with the units. The ratio of the gearboxes is 59:1. Both units are in very good condition and were test run I am listing as local pickup because of the weight. If you want the units shipped and you make any and all shipping arreangemen ts I will strap the units to a pallet. Get an accurate weight and deliver to a local warehouse which has a truck loading dock for $ 25.00 additional. If you pickup I will assist in loading on your truck or trailer with my fork truck at no charge. I ... morewill also accept cash when picked up instead of paypal. If you want to talk to me directly you can call mornings 260-824-3419 or leave a message.
|
|
|
Kollmorgen servo motor B-206-D-99-278 Goldline brushless PM servo motor
Kollmorgen servo motor B-206-D-99-278 15A 48.5A peak 230v 7000RPM Motor is in excellent condition. like new) Item1500.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14102148a2c-0xf7-
|
|
|
Cincinnati Milacron , Vickers, Kollmorgen axis motor 1-606-0210 xy axis Goldline
Cincinnati Milacron. Vickers, Kollmorgen axis motor 1-606-0210 xy axis Goldline brushless PM servo motor For Arrow or Sabre machining centers 4.8A 14.6A peak 230V 2000RPM Motor is in Good condition and was removed from a working machine. Item1498
|
|
|
Index Table with Gear Box and Motor
Selling an Index Table with Gear Box and Motor as USED and AS IS. We are an Injection Molding company that has stopped production. We are located in Carol Stream. IL. If you are local you are more than welcome to pick up the item. We are selling more parts if interested. For more information on this product or the other items we have, please contact me through ebay.
|
|
|
Fanuc CNC AC Servo Motor Model 10 A06B-0501-B001 A06B0501B001
I have a Fanuc Servo Motor Model 10/2000. It has spent its life inside a Tsudakoma rotary table. In short. a sheltered life compared to one running a normal machine tool axis. The ONLY reason I'm selling it is it won't work with the control on my machine. I didn't know this when I bought the rotary table. Live and learn. The pulse coder is an A860-0304-T111- 2000P- No. A-030274 Minor Paint Chips. Shaft is in excellent condition because it lived in an oil bath! Clean motor. Shipping will be actual cost plus $5.00 for packing and delivering to post. Thanks for looking.
|
|
|
Storm Vulcan Head Master Model 85 Surfacing
Storm-Vulcan Head and Block Surfacing Mill with 18" Cutting Head. 16) Adjustable/ Carbide Cutting Tips, Universal Cylinder Head Mounting Equipment, 2-Speed Spindle. This came out of family owned shop. I have lots other parts for it not in picts. It's a good machine in good shape. It's in Concord CA where it can be picked up. We have forklift for loading. I can also arrange shipping via truck to anywhere in the continental USA at buyers expense. Please contact before bidding with questions. Also selling a Sunnen VGS-20 so please take a look at my other auctions. Posted with
|
|
|
Old AMERICAN BOSCH MAGNETO CORP Type AB33ED-1 Magneto
From an estate. I have not tested it and don't know how to test it. Look closely at the photos and please ask any questions. As-is. As-found. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1414a30d9a3-0x106-
|
|
|
WALRUS Pump Co. Ltd TPH23KN Multi-Stage Centrifuge Water Pump 220V 1/2 HP
You are bidding on ONE(1) WALRUS Pump Co. Ltd TPH23KN Multi-Stage Centrifuge Water Pump 220V 1/2 HP These units are in good cosmetic and working condition. You get the item as shown in pictures: Thanks for looking. Product Overview: Model: TPH2T3KN Power: 220V Power: 750W Max Head: 28m Rated flow: 2(m3/ h) Caliber: 25/ 25mm FYI- Our products are acquired from bankrupt. Downsized or defunct companies. Most items are pulled from their working environment and operation. Items are usually sold in the same condition that we receive them. If there are any known issues regarding the item, we will certainly let you know. We do our best to take pictures of the actual item and anything included with the auction. If you don't see it in the picture or it is not listed in the description, it s probably not included. Never assume that it is included. ... moreIf you have any questions, please feel free to email us at PLEASE CHECK OUR FEEDBACK RATING AND BID WITH CONFIDENCE. Thanks for Bidding and Good Luck! AUCTION TERMS: DUE TO EBAY’S NEW POLICIES. ALL INTERNATIONAL BUYERS OUTSIDE OF THE U.S.A. MUST GET PRE-APPROVAL TO BID. BIDS WITHOUT PRE-APPROVAL WILL BE CANCELLED. PAYMENT OPTIONS: We accept PAYPAL for all shipped purchases and Cash or Cashiers Checks for local pick ups from our San Francisco office. Payments must be received within 5 days. California residents pay 8.5% Sales Tax for San Francisco County. SHIPPING: Shipping and handling charges listed. Including auctions listed with free shipping are shipped via ground service within the contiguous 48 states in the US. Shipments to Alaska. Hawaii. And US Territories are higher so email us prior to bidding to get correct shipping costs. Oversized, heavy and delicate items are shipped on a pallet via a freight company with economy service. Items are shipped within 4 business days from receipt of payment. Auctions listed with UPS shipping must be shipped to the paypal confirmed physical address. No PO BOX. FPO, APO addresses allowed unless we indicate USPS. We welcome buyers
|
|
|
Fanuc Servo Motor Model 10 A06B-0501-B206 #7073
Machine Sold with a 30 Day MDNA Money Back Return Guarantee. Seller will load on Buyer's Truck at No Charge. Payment Due 10 Days after Auction Close. Machinery Dealers National Association Member Fanuc Servo Motor Model 10 Fanuc Motor# A06B-0501-B206#7073 We will ship UPS. Fedex, etc or unit is available for pick up from our Cincinnati, Ohio Location. 11925 Enterprise Ave Cincinnati Ohio 45241 Ph: 513-771-2111 Fax: 513-771-2552 Summary of Selling Policies Payment We accept business checks. Personal checks, money orders, PayPal, American Express, Visa and MasterCard credit cards, bank wire transfers, ACH, and, of course, cash for items picked up at our facility. Sales Tax Machinery. Tooling and Accessories used in manufacturing are usually exempt from sales tax in our state(Ohio) A sales tax exemption certificate will be required if you ... moreare a Ohio company. Equipment purchased for personal use is subject to sales tax if you are a Ohio resident. Shipping We ship anywhere in the world. Small items(under 150 Lbs) can be shipped UPS. Larger items. Sold in North America, are usually shipped via flat bed truck- loading at our warehouse is always free. If an item must be shipped via common carrier(enclosed truck) it must be skidded or partially crated. We are equipped to do this and will charge a small fee for this service when it is required. Common carrier is used primarily for items weighing between 150 Lbs and 1500 Lbs that are not particularly top heavy or delicate. Because freight on a common carrier is loaded on many different truck before it reaches it's destination we can not be responsable for damage from handling. For international shipping of machinery we can either crate for export(complete crating) or load the item or items into a container. We are very experienced in shipping large machines out of the country. There will be reasonable charges for export crating and/or containerization, based on the time and materials required. Delivery We ship as soon as possible after receipt of a business check.
|
|
|
SEM 30Z4-61 Perm Magnet DC Servomotor with 500 line Encoder
SEM 30Z4-61 Perm Magnet DC Servomotor with Encoder* Up for sale is(1) SEM 30Z4-61 DC Servomotor with Heidenhain 500 line Encoder. Condition = Used/ Very Good. Appears to be rebuilt. I picked it up from a shop that told me it was a spare unit for a machine they no longer had. Have no way of testing it. Motor Diameter = 4” OAL = ~ 16” end of shaft to back of encoder) Motor Part# 30Z4-61* Serial# E12152* Cont Stall Torque = 44 LBIN* Max-RPM 2300 Volts 140 Pulse Amps 50* Tacho 7 Volts/1000 RPM Insul F* Heidenhain Encoder ERO 120 500 G1* IdNr. 220 155 10* S Nr. 1665406* Output Shaft =.630” Dia. 1.5” long with.200” wide slot 1 3/16” long and a tapped hole in the end. Mounting Plate = 4 15/16” SQ Alum with 4.500” dia. locator and 4 tapped holes in the corners. Approximate Shipping Weight = 27 lbs. 1983# See our“Standard Policies” page for any questions ... moreabout International Sales. Shipping, Insurance, Sales Tax, Returns, and Feedback.
|
|
|
Fanuc 20M DC Servo Motor, # A06B-0652-212 (2500M) * * USED * * WARRANTY * *
Title: Fanuc 20M DC Servo Motor Description: Our Internal Stock# 1-E5-7(09-18-13 RN) You are about to purchase the following item: Catalog# A06B-0652-212 Model 20M Serial# M-238251 Date: 82.12 Torque- 23 Nm 18 Amp 213 Volt 1500 RPM Insulation Class H Amb Temp 40 degrees C This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct ... moreshipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and payed for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive
|
|
|
GSS Motor Repair Fanuc 10M DC Servo Motor, # A06B-0651-B012 **USED**WARRANTY**
Title: GSS Motors Repair Fanuc 10M DC Serve Motor Description: Our Internal Stock# D23-2(09-18-13 RN) You are about to purchase the following item: Catalog# A06B-0651-B012 Model 10M Serial# M-320026 Date: 01- 07 Torque- 12 Nm 12 Amp 165 Volt 1500 RPM Insulation Class H Pulse Coder Amb Temp 40 degrees C This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator ... moreto determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and payed for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us
|
|
|
General Electric Direct Current Motor Type C0259AT_CO259AT_5CD164KA807A800
MonarchVMC150 Our internal inventory number on this product is 3D# 19-B-2-D PLEASE NOTE: This part was pulled from a working machine. We have no way of testing it once it was removed. This item was removed from a Monarch VMC 45 Vertical Machining Center. S/N 88321 with Fanuc 11M Control, Click here to go to a link with just the mechanical end electronic parts from that machine! OR: To go directly to a Listing of all our auctions AND store items. Items in our store can ONLY BE VIEWED if you click on the link.they will not show up in a regular search on Ebay! You won't want to miss any of our $.01 NO RESERVE auctions! DESCRIPTION: You are bidding on a General Electric Direct Current Motor. Type: C0259AT CO259AT Model Number: 5CD164KA807A800 5CD164KA8O7A8OO Encl. DPFG-BV. Instr. GEH 3967. 1350-5000 RPM. 500 Volt. 11.3 HP. App. Weight: 440 ... moreLbs. Machine running fine when taken off- Everything shown with motor is INCLUDED! NOTE* Top Bidder to pay $40 skidding fee plus actual shipping costs from 49534. Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS International, USPS Express International. Only when requested. We ship USPS Priority; this carrier type lacks reliable tracking info. We cannot be held responsible for your shipment once it leaves US land) Please understand if we ship an item on your account. We are unable to see what you are being charged for shipping. This is both FedEx and UPS rules. They do not allow us to look at your rates that you are getting with them. We will not be held responsible if you ask us to ship on your account and then the shipment cost is high. Returns: We have a 30-day return policy(excluding all manuals. And AS-IS items, see listing descr
|
|
|
SIEMENS 3-MOTOR 1FK7043-7AK71-1TAO-ZN05
18090 Wolf Road Orland Park. IL 60467 SIEMENS 3-MOTOR 1FK7043-7AK71-1TAO-ZN05, Powered by Title: SIEMENS 3-MOTOR 1FK7043-7AK71-1TAO-ZN05 Condition: ITEM IS PRE OWNED. PULLED FROM A WORKING ENVIRONMENT Description: Brand:SIEMENS Model:1FK7043-7AK71-1TAO-ZN05 Dimensions:8"X5"X4" Location: This item is located at our Orland Park store unless otherwise specified. If you are picking this item up locally instead of having it shipped. We still ask that you please call or message for the location of this item. Certain large items may not be located in our store. Thank you. Disclaimer* Please note that we do our best to describe all damage and details- dimensions are approximate by hand. If you the buyer are not happy with an item. Please see our return policy under the Returns tab below. We do NOT do partial refunds but we want every ... morebuyer to be happy with their purchase. Please read below for further description on the item. Thank you! It is our highest goal and best intention to provide exemplary customer service. Open and honest two-way communication is the key. If you feel that you cannot leave 5 star feedback for any reason. Please contact us so we may resolve the situation prior to feedback being left. Please View PHOTOS for further details RC/PCR2 ORLAND/15 74430. We accept payments via Paypal. Mastercard and Visa as well as debit cards with the Mastercard or Visa logo. We do not accept any type of International Payment at this time. Please allow PayPal ePayments at least five(5) business days to clear. Sales Tax: All State of Illinois residents will be charged state and local sales tax during the payment process. In addition. As required by Illinois state law, sales tax is required on shipping and handling charges for all shipments terminating within the State of Illinois. Please note that if you reside outside the State of Illinois and you pick your item up locally in Illinois, ownership of your item transfers within state lines and you are required to pay sales tax. This is State Law. Internation
|
|
|
Baldor DC Servo Motor MTE-4070-BLXCE
This is for a BALDOR DC SERVOMOTOR that has sat on a shelf in the warehouse and I'm fairly certain it hasn't even been used but I can't guarantee that. Does have wear from other parts rubbing up against it. Encoder: 400L 2500 max RPM 150 max Voltage Voltage Const: 40V/Krpm Current Peak: 36.97 Current Cont. 9.2 Tachometer: 7.0 V/Krpm CAT. NO: MTE-4070-BLXCE SPEC. NO: 54P062Z016G6 MFG. CODE: 59/99 Torque Stall 28 LB-IN
|
|
|
Seisakusho KSP-MHS 18C-4FR Trocho Motor Pump ! WOW !
Seisakusho KSP-MHS 18C-4FR Trocho Motor Pump! WOW! This item is used. Tested, in good working condition! Pictures above are of actual item for sale. Location W2-M8 Lister: ti. If you have any questions or require more pictures. Please contact me! NEXT DAY DELIVERY AVAILABLE- PLEASE CALL FOR DETAILS! Not what you are looking for? Visit our e-store! Powered by
|
|
|
Graham Company 303CM1 Magnapak Motor and Control
ebay template We answer all e-mails, Monday to Friday 8am- 5pm est. Please contact us using"Ask a question" link at the bottom of this page. You are bidding on the following item(s) QTY: 1 Condition: Used Testing: Untested Manufacturer: Graham Company Model Number: 303CM1 Description: Magnapak Motor and Control Notes: Minor scratches and dings. Unit has paint overspray on it. Includes Winsmith 4MCVD Speed Reducer. COO: USA. 86lbs, This auction will ship from our Lecanto. FL facility. Please bid accordingly. Our shipping carriers are UPS and USPS. Any orders of $250.00 or more will be shipped with Signature Required. Please make sure you are available to sign for these orders. We ship Monday-Friday. Please allow up to 3 days after payment is received for shipment. We ship to the Continental US on all of our auctions. For items shipping ... morefreight. You will be responsible for arranging the freight shipment. Please contact customer support for accurate weight and dimensions. Buyer is responsible for shipping insurance. Some items are shipped to Canada and/or Overseas. We ship up to 75 pounds overseas via USPS. You are responsible for all customs fees and duties. Please read the auction description. Buyer is responsible for import fees/tax/duties. We will not mark your purchase as a gift. Please contact your local customs office for costs. Our UPS rates are strictly from the UPS calculator; we do not generate shipping costs. We do not offer local pick up. We only accept PayPal for payment. This auction only includes what is shown in the photographs. If it is not shown. Please assume it is not included. All manufacturers' warranties are void unless otherwise stated. Please bid accordingly. If you have any questions. Please contact us via eBay member-to-member. Please allow us 3 business days to process a refund should you return an item. We do not refund any customs fees that you may have paid. If you have any further questions on these products please do not hesitate to submit an inquiry on eBay and we wil
|
|
|
Duel CO2 Transfer Pump
A pretty big Duel CO2 Transfer Pump. With everything. Including the motors, in great condition.
|
|
|
BRIDGEPORT 1-1/2HP 3PH J-HEAD SPINDLE DRIVE MOTOR
BRIDGEPORT 1-1/2J-HEAD 2HP 3 PHASE MOTOR You are bidding on a used motor for a Bridgeport 2J head. This motor has been and tested and found to be in good working condition. A 30 day return privilege is offered with the purchase of this motor. Shipping can be UPS or it can be picked up locally in Shelton. CT. Specs: 1-1/2HP 3 Phase CYCLE 50/60 Frame: 145T-4 Type: TVY Code: H Design: B Tropic Insul: CL.B RPM: 1730/1700 40 Degree AMB 50Hz 200V/5.2A. 400V/2.6A 60Hz 200V/5.1A SERIAL: A-25-2 MODEL: X021-06 52-80021-926 Manufacture by: US Electric Motors This motor has been tested and comes with a 30 day return privilege. Shipping can be UPS or it can be picked up locally in Shelton. CT. 30 Day Unconditional Warranty(must return freight prepaid) Check our Store and other Auctions for more great buys. Tag I.D. 9-7-13-10.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1417a0c43b1-0xfd-
|
|
|
BRIDGEPORT 2HP 3PH J-HEAD SPINDLE DRIVE W/PULLEYS
BRIDGEPORT 2J-HEAD 2HP 3 PHASE MOTOR with PULLEY'S You are bidding on a used motor for a Bridgeport 2J head. This motor has been and tested and found to be in good working condition. A 30 day return privilege is offered with the purchase of this motor. Shipping can be UPS or it can be picked up locally in Shelton. CT. Specs: 2HP 3 Phase CYCLE 50/60 Serial: 11550001 Model: 537 S115222R060F Frame: 145T-4 Type: TVY ENCL: TE Code: L Design: B Tropic Insul: CL.F NEMA NOM. EFF: 84.0 S.F. 1.0 40 DEGREE AMB RPM: 1410/1735 DUTY 2HP Continuous. 3HP 30min intermittent 230V/460V/60Hz4 50Hz 200V/7.0A. 220V/7.1A, 380V/3.7, 415V/3.5A, 440V/3.6A 50Hz 200V/6.7A. 208V/6.5A, 220V/6.3A, 230V/6.2A, 460V/3.1A Manufacture by: US Electric Motors This motor has been tested and comes with a 30 day return privilege. Shipping can be UPS or it can be picked up locally ... morein Shelton. CT. 30 Day Unconditional Warranty(must return freight prepaid) Check our Store and other Auctions for more great buys. Tag I.D. 9-7-13-9.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-1417a0c44e8-0xff-
|
|
|
Air Circulator Motor HP 1/3, 115V 3 Speed 2.7A 1100 RPM Single Phase 78029*
Air Circulator Motor HP 1/3. 115V 3 Speed 2.7A 1100 RPM Single Phase 78029* Left Side: Right Side, Manufacturer: Unknown Model: 78029 Description: Air Circulator Motor HP 1/3. 115V Condition: Used. Mounting Screw Bent, Heavy Scratches, Denting Packaging Condition Details: Not In Original Maufacturer Packaging Air Circulator Motor HP: 1/3 Volts: 115 Hz: 60 RPM: 1100/3SPD AMPS: 2.7 Phase: 1 Shaft Length: 3 1/2" Shaft Diameter: 3/4" Item not Tested*This item is not eligible for combined shipping. Includes: 78029 Air Circulator Motor HP 1/3. 115V 3 Speed 2.7A 1100 RPM Single Phase Packaging Condition: Not in Original Manufacturer Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American ... moreExpress. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Combined Shipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest item + $2 per
|
|
|
3hp 860rpm 480 208 v Cnc tool motor 131790 Includes 480v disconnect & hour meter
3hp 860rpm 480 208 v Cnc tool motor 131790 Includes 480v disconnect& hour meter Click to Enlarge Click to Enlarge Click to Enlarge Thank you for visiting mister-surplus. We sell both new and used items. Most are surplus items previously used by private companies. Government institutions and agencies. Customer satisfaction is our#1 priority. Up for sell is 3hp 860rpm 480 208 v Cnc tool motor Includes 480v disconnect and hour meter Details: 131790 Model Type: CJX H.P: 3 Cycle: 60 Amps: 9.6/4.8 Phase: 3 It's been removed form working environment. It's been working since retired. Weight: approximately 200LB(Pallet included) 3hp 860rpm 480 208 v Cnc tool motor Includes 480v disconnect and hour meter Comes exactly as pictured. We do our best to describe all items to the best of our ability. Please do not assume that accessories or the ... morecondition is other than described in the description. Any questions please feel free to ask. Please see photos and Policy for more details. Please see other items for other great deals. LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! Our business located at 827 N Rengstorff Ave. Mountain View, CA 94043 24 hours notice is required prior to pick up. Payment: Paypal* Visa. MasterCard, American Express, Discover* Santa Clara County sales tax will be applied if you are a California resident. Terms: All shipping costs are non-refundable for any circumstances. Buyer pays all freight costs for returning the product(s) All returned items must be the same condition as shipped in order to receive a refunds. 20% restocking fee applies to customer errors. Returns(RMA) If you have an issue with your item once it is received. Please email through eBay and we will try our best to help resolve the problem. If your item is in need of a replacement. Repair, refund or exchange, please email through eBay for instructions. Contact: Please ask your questions through eBay messaging system. Business Hour: Monday- Friday 10:00am- 5:00pm PST Payment Terms Payments must be received within 10
|
|
|
SUPERIOR ELECTRIC SLO-SYN MO61-FD02 STEPPING MOTOR (S3-2-106J)
This auction is for one SUPERIOR ELECTRIC SLO-SYN MO61-FD02 STEPPING MOTOR-This is a used Superior Electric Synchronous/ Stepping Motor. Series: Slo-Syn-Type: M061-FD02-Run: 35 oz. in. Steps: 200 per rev. Supply: 5.0V. 1.0A, DC Hz-Spec# BM101025-Duty: Cont. Rise: 65°C-Insul. Class: B SUPERIOR ELECTRIC SLO-SYN MO61-FD02 STEPPING MOTOR(S3-2-106J) Powered by
|
|
|
CMC Cleveland Motion Control PM Servo Motor MTE4225-171G2F 3100 RPM
CMC Cleveland Motion Controls PM Servo Motor MTE4225-171G2F. 3100 Max RPM. 140 VDC 26A. 7V/KRPM 1P44. Pulled from a running machine AGIE FAST TRACK
|
|
|
BODINE KCI-23RB 115 VAC 9.5 WATTS ELECTRIC MOTOR (C17-3-18F)
in titles& description Make sure you get our updates on discounts and new available products! In titles& description This auction is for one BODINE KCI-23RB 115 VAC 9.5 WATTS ELECTRIC MOTOR ATTENTION: What is pictured above is what to expect. Unless stated otherwise in the title or description above. All used items are sold un-tested unless stated otherwise. We accept payments of Credit Card. Debit Card, or E-checks through PayPal only. Please pay within 3 days or please contact us to arrange payment or to cancel the transaction. We honor our"No Hassle Warranty" with either a replacement or a refund if the item is DOA. Not as Described, or was damaged during shipping. Shipping costs are non-refundable. The buyer is responsible for return shipping on all returns. Please always contact us with any questions or concerns as ... morewe are here to assist you in any way we can to make you feel welcome and appreciated for being our customer. All items will be packaged and shipped within 1-2 business days. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We are not held responsible for delays in shipping due to customs. Shipping times for international shipments can take up to 30-45 days depending on holidays and/or customs. Powered by
|
|
|
LOT OF 27 ALUMINUM JUNCTIONS & BIJUR METERS
LOT OF 27 ALUMINUM JUNCTIONS COMBO OF 2.3,4,5,6,8 AND 10 WAY BIJUR METERS INCLUDE(4) CJB 2. 4) FJB 1, 1) FJB 2, 4) CJB 00(6) CJB 0. 2) FJB 0 THE LAST PIC IS OF MISC. HARDWARE LINE CLAMPS. SCREWS, ETC. I SHIP TO LOWER 48 STATES ONLY THANKS FOR LOOKING!
|
|
|
Rexroth Indramat MDD112B-N-030-N2M-180PB0, 3000RPM Servo Motor
Rexroth Indramat MDD112B-N-030-N2M-180PB0. 3Phase Permanent Magnet Motor. 3000RPM 80# Removed from working machine Location: Top of BB
|
|
|
Rexroth Indramat MKD071B-061-KP0-KN, 6000RPM Servo Motor
Rexroth Indramat MKD071B-061-KP0-KN. Permanent Magnet Motor. 6000RPM Removed from working machine Location: BB2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141da818797-0x108-
|
|
|
Fanuc Model 5 DC Servo Motor, Encoder# A860-0300-T001, Used, WARRANTY
Title: Fanuc 10 DC Servo Motor Description: Our Internal Stock# 1-G6-7(10-21-13 dale) You are about to purchase the following item: 1- Fanuc Model 5 DC Servo Motor. Encoder# A860-0300-T001, Used Model 5 2000 M Serial# M-692969 Date- 86.11 w/ Fanuc Pulse Coder# A860-0300-T001 2000P Serial# K-608232 Date- 86.9 NOTE: Tag is Unreadable. Cannot Make out Catalog# This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping ... moreis based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipp
|
|
|
DAYTON HEAVY DUTY SPLIT PHASE JET PUMP MOTOR 1/2 HORSEPOWER
aims DAYTON HEAVY DUTY SPLIT PHASE JET PUMP MOTOR 1/2 HORSEPOWER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Dayton. This is a Split Phase Jet Pump Motor in Good Condition. Specifications: Motor Type: Jet Pump Motor. Horspower: 1/2. RPM: 3.450. Voltage: 115V 60Hz. Amps: 8.2. Overall Length: 17" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. DAYTON HEAVY DUTY SPLIT PHASE JET PUMP MOTOR 1/2 HORSEPOWER DAYTON HEAVY DUTY SPLIT PHASE JET PUMP MOTOR 1/2 HORSEPOWER Reliable Tool Inc. c 2011 | Powered by
|
|
|
Walrus TPH2T5KN 3/4 HP Booster Pump 3 Phase Centrifugal 230/460 VAC 1" 1060W
You are bidding on ONE(1) Walrus TPH2T5KN 3/4 HP Booster Pump 3 Phase Centrifugal 230/460 VAC 1" 1060W These units are in good cosmetic and working condition. You get the item as shown in pictures: Thanks for looking. Product Overview: Horse: 3/4 Volts: 230/460 AC Speed: 2900/3500 RPM Nominal Amps: 4.2/2.1 Phase: 3 Three Pressure: 230V/85 PSI@ 142 Deg F/ 460V/194 PSI@ 104 Deg F Insulation: Class F Protection: IP44 Enclosure Flow rate: 12 GPM FYI- Our products are acquired from bankrupt. Downsized or defunct companies. Most items are pulled from their working environment and operation. Items are usually sold in the same condition that we receive them. If there are any known issues regarding the item, we will certainly let you know. We do our best to take pictures of the actual item and anything included with the auction. If you don't ... moresee it in the picture or it is not listed in the description, it s probably not included. Never assume that it is included. If you have any questions, please feel free to email us at PLEASE CHECK OUR FEEDBACK RATING AND BID WITH CONFIDENCE. Thanks for Bidding and Good Luck! AUCTION TERMS: DUE TO EBAY’S NEW POLICIES. ALL INTERNATIONAL BUYERS OUTSIDE OF THE U.S.A. MUST GET PRE-APPROVAL TO BID. BIDS WITHOUT PRE-APPROVAL WILL BE CANCELLED. PAYMENT OPTIONS: We accept PAYPAL for all shipped purchases and Cash or Cashiers Checks for local pick ups from our San Francisco office. Payments must be received within 5 days. California residents pay 8.5% Sales Tax for San Francisco County. SHIPPING: Shipping and handling charges listed. Including auctions listed with free shipping are shipped via ground service within the contiguous 48 states in the US. Shipments to Alaska. Hawaii. And US Territories are higher so email us prior to bidding to get correct shipping costs. Oversized, heavy and delicate items are shipped on a pallet via a freight company with economy service. Items are shipped within 4 business days from receipt of payment. Auctions listed with UPS shipping must be shipped to
|
|
|
API Gettys Servo Motors CNC Axis Retrofit
motors come with cords but the pins dont match up on some of the plugs
|
|
|
LIftMaster 1 1/2 HP Motor / Gate Motor / Garage Motor / Rollup Door roll up Gate
Used LiftMaster motor. Perfect for rollup doors, gate, and garage door opener.
|
|
|
MTH T41E SS REGENERATIVE TURBINE PUMP (S20-23)
THIS AUCTION IS FOR ONE MTH T41E SS REGENERATIVE TURBINE PUMP. FRANKLIN LEECTRIC 1113007407, 2/3HP, P, 115/208-230, 3450/2875RPM. MTH T41E SS REGENERATIVE TURBINE PUMP(S20-23) Powered by On Dec-23-13 at 13:23:30 PST. Seller added the following information:
|
|
|
Westinghouse Electric induction Motor type cs class 1
Westinghouse Electric Induction Motor Type cs Class 1. Frame 284 7.5hp. RPM 1750 60 cycles. 220 440 volts. 20 10amps per terminal. Style 1262269. Ser# 4544.
|
|
|
ORIENTAL MOTOR 6GK30K GEARHEAD 30:1 RATIO (S20-7)
THIS AUCTION IS FOR ONE ORIENTAL MOTOR 6GK30K GEARHEAD 30:1 RATIO ORIENTAL MOTOR 6GK30K GEARHEAD 30:1 RATIO(S20-7) Powered by
|
|
 |