In 
 
Order by: 
Available to: 
Price: 
 - 
$
42,500
Buy It Now
$0 Shipping
Condition: Used
Location: Aurora,IL,USA
$
5,550
Buy It Now
$0 Shipping
Condition: Used
Location: Huntingdon,TN,USA
X-Axis Travel: 20.4 inches Y-Axis Travel: 14.5 inches Z-Axis Travel: 12 inches Auto Threading. Power Z, Submergable Special cost saving filtration system ... moreinstalled by Precision Water Solutions. this saves 50% on filter costs compared to the canister sytle. You can also change filters while the machine is running. We purchased new in 1996 and have all repair reciepts. We have 7 Fanuc wire EDM machines. The only reason we are selling this is to make room for a new wire EDM machine we have purchased due in mid-Apirl. Machine is under power and you are welcome to come out and see it run(Saint Charles. IL) Payment Terms: Funds must clear the bank before the machine will be shut down and okayed tobe moved out of the building. Shipping: Buyer is responsible for all rigging of machine and must set up and pay all freight. We maybe able to save you some money if you use the riggers that are delivering the new machine. But timing will be important. Buyer assumes liability for the rigging and shipping of machine. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e03155eb5-0xff-
$
9,900
Buy It Now
$0 Shipping
Condition: Used
Location: Stratford,CT,USA
1997 Charmille Robofil 290 CNC Wire EDM This machine has been used very lightly.It was removed from a local college where it was used for training students.The ... morecollege purchased some new machinery and used this machine as there trade-in. We where told it was in good working order until a couple of months ago when the power generator board had gone out.The school had a Charmilles technician come out for repair and found the cost of the board would be $3000.00 they had already ordered the new machine so they left it unrepaired.We have very little EDM experience so we are selling this item at a discount price so the new owner can make the necessary repairs. The machine is sold as is where is. Questions Call Steve@ 866-803-5202 Shipping Quotes Contact DESCRIPTION: 15.7" X 9.8" X 7.87" TRAVELS WIRE EDM SYSTEM WITH CHARMILLES CONTROLLER. AUTOMATIC. WIRE THREADER/RETHREADER. COLLISION PROTECTION ON ALL AXIS, GLASS SCALE FEEDBACK ALL AXIS, STAINLESS STEEL 3 SIDED TABLE AND REMOTE PENDANT WITH TRANSFORMER AND CHILLER. GENERAL SPECIFICATIONS. MAXIMUM WORKPIECE WEIGHT 1.100 LBS. MAXIMUM WORKPIECE SIZE 33.5" X 19.7" X 7.87" TRAVELS( X X Y X Z) 15.7" X 9.8" X 7.87" TAPER CAPACITY 0 TO 30 DEGREES AT FULL. WIRE DIAMETER CAPABILITIES: 0.004” 0.006” 0.008” 0.010” 0.012” APPROXIMATE OVERALL DIMENSIONS 71"LR X 63"FB X 88"H. APPROXIMATE MACHINE WEIGHT 5.600 LBS. EQUIPPED WITH. AUTOMATIC WIRE THREADING. PROGRAMMABLE Z AXIS, CHILLER, TRANSFORMER, 4" COLOR CRT W/GRAPHICS. RS232 COMMUNICATIONS CAPABILITY. MANUALS.
$
40
Buy It Now
Free Shipping
Condition: New
Location: Chino Valley,AZ,USA
ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 VERY IMPORTANT! PLEASE READ. AFTER PURCHASING ... moreTHIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDULENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION WILL BE TAKEN AGAINST THESE BUYERS THRU EBAY POLICIES BY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION SEE PICTURES BELOW WE WILL SEPARATE IF YOU SEE SOMETHING YOU WOULD LIKE TO BUY WE JUST STRIPPED A 1987 SODICK WIRE EDM SINKER MARK FS-A7C W/ YASNAC CONTROL TO SEE ALL PARTS FROM THIS MACHINE PLEASE PLEASE CALL IF YOU NEED OTHER PARTS FOR IT. FREE SHIPPING BY UPS IN THE 48 STATES. INTERNATIONAL SHIPPING WILL BE $100 SODICK A7C EDM PALLET 2 CALIFORNIA BUYERS TO PAY 8.75% SALES TAX SHIPPING& HANDLING: FREE SHIPPING BY UPS IN THE 48 CONTINENTAL STATES. PAYMENT INSTRUCTION: Payment can be made with paypal. Business or personal check or wire transfer. All payments must be received by Arpi Machine Sales within 7 days. Payments must be sent to ARPI MACHINE SALES at 12165 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the paym
$
9,900
Buy It Now
Free Shipping
Condition: Used
Location: Clearwater,FL,USA
$
15,750
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Charles,IL,USA
Note: As FedEx Priority Service do not deliver to PO BOX addresses. Please mention you Complete Postal Address with Post code and Contact Numbers Charmilles ... moreRoboform 20/30/31/35/40/41/50/54P. Charmilles Robofil 200/290/300/310/400/2020-SI/2030/4020/6000/6020 Agie CUT 200D For Charmilles Robofil 190. 440 CC Please buy: http:cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=300700338134 This is 3.5 inch Floppy Drive Emulator(Floppy to USB Converter) It is the replacement for almost of 3.5 inch floppy drive which works on fully formatted capacity of floppy disk. Package include one preformatted 4gb Pen Drive Ready to start working Specifications: Interfaces: USB socket to insert USB flash stick. 4-pin floppy socket for voltage supply- 34-pin socket board for floppy controller connection· Diagnostics LED: Busy· Display: 2-digit display to show current virtual floppy· Selection buttons: 2 buttons to select a floppy. One button controls one digit. This helps you select a floppy easily and quickly. Format type supported 720 kb DD· Voltage supply: 5 V DC. 4-pin-voltage supply socket for 3.5 inch drive Requirements: PC running Windows XP system to run our program to format USB flash drive. USB flash drive. Preffered 4 gb or less Kingston Make. Avoid Sandisk/Transcend) Payment: We accept PAYPAL only. Please. Pay within 2 days of auction close. If you do not pay or respond within 7 days, we will relist and report to eBay as unpaid item. Shipping: FREE· We ship via FedEx We s hip worldwide. Kindly update us with your zipcode location and Contact Phone Number while buying. Special discounts on Bulk Purchase apps.froo.com | Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
$
7,950
Buy It Now
Free Shipping
Condition: Used
Location: Brook Park,OH,USA
SPECIFICATIONS; CAN BE MACHINED(SUBMERGED) 25.6" x 16.5" x 6.9" TABLE TRAVEL(X& Y AXIS) 11.8" x 7.9" POWERED Z AXIS TRAVEL. ... more6.9" TAPER ANGLE(U& V AXIS) 0 TO 15 DEG. MAXIMUM TABLE FEEDRATE. 35.4" IPM WORK TABLE SIZE(WxD) 23.6" x 15.7" WORK TANK DIMENSIONS(WxD) 35.2" x 25.5" MAX. WEIGHT OF WORK PIECE.550lb) 363lb) SUBMERGED WIRE TENSION. 0 to 2500(g) WIRE FEED SPEED(MAX) 0 TO 394" IPM WIRE DIAMETER. 0.004" TO 0.012" MACHINE TOOL WEIGHT. 3080 lbS DIELECTRIC TANK EXTERNAL DIMENSIONS(WxDxH) 48.4" X 43.3" X 33.1"H CAPACITY. 320 LITERS FILTERING FLOW RATE. 40 L/MINUTE EQUIPPED WITH: FANUC 16WB CNC CONTROL CHILLER FILTRATION SYSTEM ALL AVAILABLE MANUALS COMES WITH.010. 012 GUIDES AND SOME SPARE PARTS Mfg Date: 1996 LOCATION: Prentice. WI UNDER POWER FOR INSPECTION Buyer will arrange and pay all shipping costs.
$
525
Buy It Now
Free Shipping
Condition: New
Location: Rochester,NY,USA
$
9,000
Buy It Now
$0 Shipping
Condition: Used
Location: Mentor,OH,USA
Mitsubishi DWC-110H wire EDM Machine Has been mothballed for 10 years- worked fine when decommissioned. But can also be used for parts Purchased new in ... more1989. Specs: Machining Stroke( X x Y) 11.81" x 17.72" Table Dimensions 25.59" x 23.62" Maximum Workpiece Dimensions 21.65" x 23.62" x 10.24" Maximum Workpiece Weight 1.433 Lbs Rapid Traverse 51.18 ipm Wire Diameter Capability 0.004" 0.013" Taper Capacity +/ 12 Deg. in 4" Table Resolution.000004" Maximum Amperage 50 Amps Floor space requirement 100" x 120" Approximate Machine Weight 6.300 Lbs. Included are: Filtration System Air Cooling Unit Worklight Automatic Threader Machine being sold As Is. Where Is. Please ask any questions before bidding- Buyer to be responsible for all shipping arrangements and costs. We can load the machine onto your truck.
$
24,500
Buy It Now
$0 Shipping
Condition: Used
Location: Dousman,WI,USA
$
2,200
3d 2h 10m 9s
0 bids
$0 Shipping
Condition: New
Location: Walnut,CA,USA
$
495
Buy It Now
Free Shipping
Condition: New
Location: Rochester,NY,USA
Wire EDM 8 inch Rails $700( 2) Rails(750" thick X 2.5" wide X 8"Long) the Lip dimension is.100 thick and.150 deep) 1) stop for front side(2) ... moreM5 SHCS all parts are made with 420 stainless steel and hardened to 45-55 RC Socket Head Cap Screws(SHCS) are stainless Rails are precision ground +/0002" flat/parallel. PayPal is the desired form of payment. We will also except check or money order. also willing to offer terms on payment with final payment due on delivery(COD) Send us a message if you would like to pay without using PayPal or have an interest in setting up payment terms. Thanks Brad B. Posted with
$
29,500
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Charles,IL,USA
Gold International Machinery Corporation | Mitsubishi CNC Wire EDM Model# RA90 Our Inventory Number: 9175-505 Technical Specifications: Model: RA-90, ... moreSerial No. D90M0205A, New: 2005, Max. workpiece dimension[mm] 860 x 760 x 160, Maximum workpiece weight: 350, Table dimensions: 572 x 478, Machining range(X x Y) 320 x 250, Table rapid-feed speed[mm/min] 1300, Wire dia meter[mm] 0.2- 0.3, Maximum wire feed rate[m/min] 15, Taper machining device: Standard, Z-Axis stroke(manual operation) 165, Max. taper angle[mm] 15 for workpiece 100 mm thick, Max. machining current: 50 A, Display: 10.4" color LCD, Minimum drive unit[u m] 0.05 um, Equipped With: Mitsubishi CNC Controls, Mitsubishi Model HE-SV50-W1 Cooler Unit, Serial No 05D9m202, This item is in very good condition! We can palletize. Cover and load this item for an additional fee. Please inquire. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s m
$
9,950
Buy It Now
$0 Shipping
Condition: Used
Location: Algonac,MI,USA
$
495
Buy It Now
$15.5 Shipping
Condition: New
Location: Rochester,NY,USA
Multi Position V-Block Will hold up to a two inch diameter Bottom Plate is.5 X 5 X 5(inch) All Parts are 420 stainless steel and hardened to 48-52 RC ... moreMain V-Block can be set in three different positions. There is a straight rail that bolts to all four sides of the bottom plate for ease of removing the V-Block and setting back up. There is a low profile V-Block that can also be set in two different positions.All socket head cap screws(stainless) in picture are provided. Bottom plate and both V-Blocks are precision ground +/ 0002" flat/parallel
$
42,000
Buy It Now
$0 Shipping
Condition: Used
Location: Wellington,OH,USA
$
85
1d 21h 10m 0s
0 bids
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
10,500
Buy It Now
$0 Shipping
Condition: Used
Location: San Diego,CA,USA
$
1,400
Buy It Now
$14.85 Shipping
Condition: New
Location: Union City,CA,USA
$
24,000
Buy It Now
$0 Shipping
Condition: Used
Location: Mentor,OH,USA
Mitsubishi DWC-110H wire EDM Machine Has been mothballed for 10 years- worked fine when decommissioned. But can also be used for parts Purchased new in ... more1989. Specs: Machining Stroke( X x Y) 11.81" x 17.72" Table Dimensions 25.59" x 23.62" Maximum Workpiece Dimensions 21.65" x 23.62" x 10.24" Maximum Workpiece Weight 1.433 Lbs Rapid Traverse 51.18 ipm Wire Diameter Capability 0.004" 0.013" Taper Capacity +/ 12 Deg. in 4" Table Resolution.000004" Maximum Amperage 50 Amps Floor space requirement 100" x 120" Approximate Machine Weight 6.300 Lbs. Included are: Filtration System Air Cooling Unit Worklight Automatic Threader Machine being sold As Is. Where Is. Please ask any questions before bidding- Buyer to be responsible for all shipping arrangements and costs. We can load the machine onto your truck.
$
2,000
Buy It Now
$0 Shipping
Condition: New
Location: Rochester,NY,USA
$
10,000
Buy It Now
Free Shipping
Condition: Used
Location: USA
LOWERED RESERVE AUCTION Selling 1998 FX10 Wire edm with robot loader. Currently running under power. It includes robot without tooling. 16 pos 3R Workpal ... morecurrently disconnected for floorspace. Mitsubishi has optional advanced pendant(5k option) and also 20kg wire loader(5k) option included in sale. Machine is being sold as is. Where is. buyer responsible for DISSCONNECT. LOADING AND RIGGING. We may be able to arrange/discuss loading. Mitsubishi FX-10 5-axis CNC wire EDM. Max Workpiece Dimensions 800W X 575D X 215H mm(31.50" x 22.63" x 8.46" | Max Weight Of Workpiece 500kg(1.102 lbs) | Dimension Of Table 630 X 530mm(24.80" x 20.86" | Each Axis Movement Amount(XYZ) 350 X 250 X 220mm(13.77" x 9.84" x 8.66" | Travels(U-V) +/ 1.25" ONE Wire alignment unit also included with a set of used.01" guides. Please check my perfect 100% feedback since 2001. Canadian companies must pay HST 13% Certified check money order(international type) or paypal only EMAIL TO ARRANGE VIEWING IN OLDCASTLE ONTARIO CAN. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1443905a49a-0xec-
$
495
Buy It Now
Free Shipping
Condition: New
Location: Rochester,NY,USA
Wire EDM V-Block 1.5 X 5 X 5(inch) Will hold up to a 3 inch diameter. 420 stainless steel(hardened 48-52RC) With- clamp- set up rail- stainless socket ... morehead cap screws- side rail(for standing block up or on its side) 3) clamp screws The slotted screws are for M8 and M6 socket head caps screws they are machined 50 mm apart so these will work in any Wire EDM machine. Main Block is precision ground +/ 0002" flat/parallel
$
11,000
Buy It Now
$0 Shipping
Condition: Used
Location: Huntington Beach,CA,USA
$
10
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Oxford,PA,USA
$
6,080
6d 11h 31m 58s
0 bids
$0 Shipping
Condition: Used
Location: Vista,CA,USA
$
150
Buy It Now
$15 Shipping
Condition: New – Open box
Location: Oxford,PA,USA
$
2,990
Buy It Now
$0 Shipping
Condition: Used
Location: Vista,CA,USA
$
16,880
Buy It Now
Free Shipping
Condition: Used
Location: Chatsworth,CA,USA
$
7,999
Buy It Now
$0 Shipping
Condition: New
Location: Walnut,CA,USA
$
325
Buy It Now
$15 Shipping
Condition: New
Location: Oxford,PA,USA
$
39,500
Buy It Now
$0 Shipping
Condition: Used
Location: Dousman,WI,USA
$
40
Buy It Now
$12 Shipping
Condition: New – Open box
Location: Oxford,PA,USA
$
9,999
Buy It Now
$6,000 Shipping
Condition: New
Location: China
$
10,000
Buy It Now
Free Shipping
Condition: Used
Location: Grand Rapids,MI,USA
$
320
Buy It Now
$0 Shipping
Condition: New
Location: Lancaster,NY,USA
$
360
7d 14h 34m 0s
0 bids
$0 Shipping
Condition: Used
Location: Gilbert,AZ,USA
$
3,950
Buy It Now
$0 Shipping
Condition: Used
Location: Cincinnati,OH,USA
$
50
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Springfield,IL,USA
$
73,000
Buy It Now
$0 Shipping
Condition: Used
Location: Wellington,OH,USA
$
249.99
Buy It Now
Free Shipping
Condition: New
Location: Broadview Heights,OH,USA
$
34,500
Buy It Now
$0 Shipping
Condition: Used
Location: Anaheim,CA,USA
$
40
Buy It Now
$10 Shipping
Condition: New – Open box
Location: Oxford,PA,USA
$
90
7d 14h 26m 5s
0 bids
$15 Shipping
Condition: Used
Location: Phoenix,AZ,USA
$
23
Buy It Now
$10 Shipping
Condition: New – Open box
Location: Oxford,PA,USA
$
44,500
Buy It Now
Free Shipping
Condition: Used
Location: Warren,MI,USA
$
50
Buy It Now
$12 Shipping
Condition: New
Location: Oxford,PA,USA
$
11,500
Buy It Now
Free Shipping
Condition: Used
Location: Elgin,IL,USA
$
100
Buy It Now
$13 Shipping
Condition: New
Location: Oxford,PA,USA
$
29,900
Buy It Now
Free Shipping
Condition: Used
Location: Kansas City,MO,USA
$
47,500
Buy It Now
$0 Shipping
Condition: Used
Location: Anaheim,CA,USA
DESCRIPTION: 21.65” X 27.55” X 24.0” TRAVELS. SUBMERGED CUTTING TO 24” TALL, 30 DEGREE TAPER CUTTING AT ANY HEIGHT, 12.0” LCD TOUCH SCREEN, AUTO-THREADING, ... more004”012” WIRE DIAMETERS, LARGE 17.7 WIRE SPOOL CAPACITY, 3,307 LBS WORKPIECE AND ONLY 7,200 HRS! GENERAL SPECIFICATIONS TABLE SIZE: 35.43" X 23.62" MAXIMUM WORKPIECE DIMENSIONS: 47.24" X 27.55" X 24” MAXIMUM WORKPIECE WEIGHT: 3307 LBS MACHINING STROKE(X x Y x Z) 21.65" X 13.78" X 24” U/V TRAVEL: 21.65 X 13.77" WIRE DIAMETERS: 004" 012" WIRE SPOOL SIZE: 17.7 LBS. TAPER CAPACITY: 0 TO 30 DEGREES MACHINE WEIGHT: 4828 LBS MACHINE SIZE: 71" X 63" X 85.5" HOURS: 7185 MACHINE DIMENSIONS: 118” X 110” X 90” MACHINE WEIGHT: 12,500 LBS. EQUIPPED WITH EXTENDED Z TRAVEL, 12.0" LCD TOUCH SCREEN, INTERNAL HARD DRIVE AND 3.5" FLOPPY DRIVE, CT-EXPERT TO OPTIMIZE CUTTING BASED ON OPERATORS SELECTION OF SPEED PRECISION AND SURFACE FINISH, PILOT-EXPERT AUTOMATICALLY MONITORS MACHINING AND RESPONDS INSTANTLY BY ADJUSTING THE SPARK ACCORDING TO WORKPIECE SHAPE OR FLUSH CONDITION, PROFILE-EXPERT AUTOMATICALLY ADJUSTS MACHINING PARAMETERS AND WIRE TENSION BEFORE EACH CHANGE IN DIRECTION, IMPROVING CUT GEOMETRY 30 DEGREE TAPER AT ANY Z HEIGHT, SUBMERGED CUTTING OVER FULL Z STROKE AUTOMATIC WIRE THREADING, INTEGRATED COLLISION PROTECTION& GLASS SCALE FEEDBACK FOR XYUVZ, CC" GENERATOR, ELECTRIC CHILLER, TRANSFORMER MANUALS PRICE: $134,500 NEED MORE INFO ABOUT THIS MACHINE? Call DAVE at 813-444-4558 Terms: Quote is subject to withdrawal and prior sale. Price excludes all applicable taxes, de-installation, rigging/loading and shipping, all of which will be Buyer's responsibility. Risk of loss and title pass on floor at current location of equipment immediately upon transfer of funds. All orders and agreements made by sales representatives are subject to approval by an authorized officer of the seller. Seller has no direct knowledge regarding prior use, maintenance, condition or usability for buyers purpose,
$
9,800
Buy It Now
$0 Shipping
Condition: Used
Location: Las Vegas,NV,USA
$
48,900
Buy It Now
Free Shipping
Condition: Used
Location: Austin,USA
$
19,500
Buy It Now
Free Shipping
Condition: Used
Location: Phoenix,AZ,USA
$
23,994
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Spring Grove,IL,USA
Made in USA- Products and services designed and built by: align=middle src="http:app.onlinephotofiler.com/images/A_5/0/1/1/11105/TechStar_Color_Logo_a5d1f.Large.jpg?v=285b" ... morewidth=498 height=246 TechStar supplies the market with EVERY part you could need for your AGIE wire EDM machine as well as consumables. Wear items, and other modifications. We'll even train you to use it! These machines are so easy to use. 1 day is typically all that is needed to learn the ins and outs of operation and maintenance! And remember, TechStar will always offer top notch phone support and training and service at your facility as well! TechStar-edm.com See out MicroSoft SKYDRIVE http:qrs.ly/wj1jy2y for technical information about AGIE wire edms: Product Installation Operators Manuals Troubleshooting Guide Post Processor Info Schematics Much More CHECK our eBay Store at http:stores.ebay.com/techstar-edm Looking for a great way to add capacity to your shop? New to the Wire EDM world? Want only the finest in precision? Need to stay within budget? Parts Warranteed NO RESERVE The TechStar"Mustang" is the answer! This machine has been Resto red and Modi fied" RESTOFIED" professionally by TechStar International. Inc. The AGIE Wire EDM innovators for over 25 years! We began with an AGIE DEM250( DEM612) model machine and built upon this Swiss firms' reputation for incredible accuracy and repeatability. Note the representative photo of the TechStar machine. When we're finished with the Mustang. It's in better than new condition, and with our modifications, performance and operation is at a far superior level! Example: When equipped with TechStar's revolutionary FAST-TRACK system. Cutting rates have been shown to quadruple with no loss in accuracy! The UV head travels 15mm to provide tapering ability with 120mm(4.72 in) of Z height travel. The CNC 100 control automatically produces Conical taper by simply entering the angle. Even the DI water filtration unit is fully refinished and nearly every
$
7,900
Buy It Now
Free Shipping
Condition: Used
Location: Oklahoma City,OK,USA
$
26,500
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Charles,IL,USA
$
24,900
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Charles,IL,USA
$
74,500
Buy It Now
$0 Shipping
Condition: Used
Location: Dousman,WI,USA
$
39,500
Buy It Now
$0 Shipping
Condition: Used
Location: Dousman,WI,USA
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
Mitsubishi DWC-110H wire EDM Machine Has been mothballed for 10 years- worked fine when decommissioned. But can also be used for parts Purchased new in 1989. Specs: Machining Stroke( X x Y) 11.81" x 17.72" Table Dimensions 25.59" x 23.62" Maximum Workpiece Dimensions 21.65" x 23.62" x 10.24" Maximum Workpiece Weight 1.433 Lbs Rapid Traverse 51.18 ipm Wire Diameter Capability 0.004" 0.013" Taper Capacity +/ 12 Deg. in 4" Table Resolution.000004" Maximum Amperage 50 Amps Floor space requirement 100" x 120" Approximate Machine Weight 6.300 Lbs. Included are: Filtration System Air Cooling Unit Worklight Automatic Threader Machine being sold As Is. Where Is. Please ask any questions before bidding- Buyer to be responsible for all shipping arrangements and costs. We can load the machine ... moreonto your truck.
Mitsubishi FX10 5-Axis Wire EDM Year Manufactured: 1997 Submerged cutting Auto Threader Wire Chopper Chiller Good Condition for age of machine. It is under power and can be inspected prior to purchase.
X-Axis Travel: 20.4 inches Y-Axis Travel: 14.5 inches Z-Axis Travel: 12 inches Auto Threading. Power Z, Submergable Special cost saving filtration system installed by Precision Water Solutions. this saves 50% on filter costs compared to the canister sytle. You can also change filters while the machine is running. We purchased new in 1996 and have all repair reciepts. We have 7 Fanuc wire EDM machines. The only reason we are selling this is to make room for a new wire EDM machine we have purchased due in mid-Apirl. Machine is under power and you are welcome to come out and see it run(Saint Charles. IL) Payment Terms: Funds must clear the bank before the machine will be shut down and okayed tobe moved out of the building. Shipping: Buyer is responsible for all rigging of machine and must set up and pay all freight. We maybe able to save you ... moresome money if you use the riggers that are delivering the new machine. But timing will be important. Buyer assumes liability for the rigging and shipping of machine. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e03155eb5-0xff-
SODICK 4530DAWT WIRE EDM Specifications SODICK A530DAWT. Wire. EX21 Power Supply, Controls. Filter, Threading, 1995 Serial Number: T2205 Year(New 1995) X Travel.19.6. Y Travel.12.5. Z Travel.10.6. Maxium Tapper.10 Degree. Machine is very clean low hours was used in clean room environment. THIS SALE IS FINAL TERM AS IS WHERE IS. WE CAN ARRANGE THE SHIPMENT GLOBALLY BUT CUSTOMER HAVE TO PAY FOR THE FREIGHT LOCAL PICKUP'S WELCOME.
1993 CHARMILLES ROBOFIL 2020 WIRE EDM S/N 123105 SUPER CLEAN WELL MAINTAINED ONE OWNER CHARMILLESROBOFIL 2020 SUBMERGED CNC WIRE EDM MAXIMUM WORKPIECE SIZE- 39" X 19.8" X 5.91" TABLE TRAVEL- X 12.5" TABLE TRAVEL- Y 8.5" VERTICAL TRAVEL- Z 4.49" TAPER- +/ 0 TO 30 DEG. MAXIMUM WORKPIECE WEIGHT- 1102 LBS. APPROXIMATE MACHINE DIMENSIONS- 70"LR) X 92"FB) X91"H) EQUIPPED WITH- CHARMILLES CNC CONTROLLER WITH 14" COLOR CRT SUBMERGED CUTTING AUTOMATIC WIRE FEEDER WITH AUTO THREADER MAKE OFFER
HomeTemplate The AE 300 wire EDM from ONA is a compact. Fixed-bed machine designed for high precision cutting in a submerged mode. It provides XYZ axis travels of 400 mm x 300 mm x 250 mm and supports workpieces to 1,000 lbs. The 5-axis machine has a fixed clamping system so that the weight of the workpiece rests directly on the frame. Which results in the guidance system being subjected to only light mechanical forces. Included in the machine is ONA's Expert Erosion System that controls the cutting process and modifies the power supply when cutting complex parts. Which helps provide optimum machine performance without operator intervention. The HTS(Height Thickness Speed) system helps improve cutting speeds and precision of straightness in thick parts. The ONA AE 300 incorporates automatic strategy to produce the optimum cutting conditions ... morefor a given program. Programs are automatically produced after a few questions are answered such as workpiece material. Part thickness, wire diameter, etc. allowing an operator with limited experience to produce an accurate complex workpiece. In addition. The patented built-in automatic wire threading system can handle a variety of diameters and types of wires. Other features of the ONA AE 300 Wire EDM include: The EDM can operate 24 hours a day. Seven days a week Conversational CNC enhances operator interface Standard wire feed system that handles up to 100 lb. spools of wire Low wire consumption Wire chopper CNC enabled with Ethernet connection; off-site transmission from the CNC to PC or mobile phone Lifetime mineral bed Dielectric Filtering System, A product brochure about the AE 300 or complete series of wire EDMs is available. Specification Description Travels(X.Y) 15.75" X 11.8" Travel(Z) 9.85" Travel(U.V) 3.15" X 3.15" Max Workpiece Dim. 31.5" X 27.6" X 9.8" Max Workpiece Weight 2200 lbs Max Axis Speed 78.74 in/m Max Taper at 9.85" 8.5deg(max +/ 30deg/2in) Wire Dia. 0.004" 0.012" Wire Spool Up To DIN 355(100 lb
MITSUBISHI WIRE EDM MACHINE COOLANT PUMP SYSTEM ​. ​MITSUBISHI EDM COOLANT PUMP SYSTEM ORGANO FILTER ELEMENT PUMP 1 DATA MITSUBISHI SUPERLINE POLES: 4 TYPE: SF-ER 0.2 KW HZ: 50/ 60 VOLTAGE: 200/ 220 AMPS: 1.26/ 1.10 RPM: 1.430/ 1,730/ 1,740 PUMP 2 DATA TYPE: NQ-1805 HZ: 50/ 60 VOLTAGE: 200/ 220 PHASE: 3 OVERALL MEASUREMENTS: 46" x 26" x 45" WEIGHT: 548 LBS LOADING FEE: $25 COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping ... moreCarrier Domestic I will ship to: Customer Service Policy: ITEM WILL BE SHIPPING FEDEX FREIGHT. A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) There will be a local pick-up fee for items purchased after 10/20/2008* Please contact us at 626-330-4647 if you would like to combine items to save on shipping and handling. We encourage customers to use there FEDEX/ UPS/ USPS account to ship out items. All items can be picked up and are shipped from 14911 Don Julian Rd. City of industry, CA 91746 626-330-4647 Payment Policy: PayPal: Yes we do accept paypal payments for
Hitachi H-Cut 203M-AWF Wire Electrical Discharge Machine EDM Description Hitachi H-Cut 203M-AWF Wire Electrical Discharge Machine EDM CNC Wire Cut Machine Manufacturer Hitachi Manufacturer Part Number H-Cut 203M-AWF Item/Ship Weight 1111 LBS Tech Condition This item has not been fully tested and is being sold as is. This EDM was removed from service within the last 3 years because of downsizing of manufacturing. The tool appears to be nearly complete but may be missing parts. Paperwork with variables are included. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ... moreship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item will require palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 40881 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator
Made in USA- Products and services designed and built by: align=middle src="http:app.onlinephotofiler.com/images/A_5/0/1/1/11105/TechStar_Color_Logo_a5d1f.Large.jpg?v=285b" width=498 height=246 TechStar supplies the market with EVERY part you could need for your AGIE wire EDM machine as well as consumables. Wear items, and other modifications. We'll even train you to use it! These machines are so easy to use. 1 day is typically all that is needed to learn the ins and outs of operation and maintenance! And remember, TechStar will always offer top notch phone support and training and service at your facility as well! TechStar-edm.com See out MicroSoft SKYDRIVE http:qrs.ly/wj1jy2y for technical information about AGIE wire edms: Product Installation Operators Manuals Troubleshooting Guide Post Processor Info Schematics Much More ... moreCHECK our eBay Store at http:stores.ebay.com/techstar-edm Looking for a great way to add capacity to your shop? New to the Wire EDM world? Want only the finest in precision? Need to stay within budget? Parts Warranteed NO RESERVE The TechStar"LEGEND.2" is the answer! Need the top-of-the-line! More Tapering? More Features? Greater capability? This machine has been Resto red and Mod fied"RESTOFIED" professionally by TechStar International. Inc. The AGIE Wire EDM innovators for over 25 years! We began with an AGIE DEM 315/2 model machine and built upon this Swiss firms' reputation for incredible accuracy and repeatability. The/2 version of the DEM 315 is the more sought after version of this series. The 100D Generator includes TechStar's FAST-TRACK 1 for even better speeds and extra features. It packs the ACC(Automatic Current Control) option! ACC means the machine adjusts frequencies automatically to different cutting conditions. Allowing better efficiency and less operator intevention! These are really nice features that really work! The UV head travels a full 35mm to provide greater tapering ability! This machine gives you 120mm(4.72 in) of Z height t
Thanks for looking. This a must have for your machine shop. Let me know if you need more photos? Must have for a Machine shop. On Mar-15-13 at 09:23:33 PDT. Seller added the following information:
Description Hug Lot Wire EDM Railes Clamps Hold Down Tooling PLEASE EMAIL ME WITH ANY QUESTIONS Payment All purchases are expected to be payed within 5 business days. Shipping All Items will be shipped USPS/ Fedex Ground or Freight(LTL) Heavier Items that are listed with freight cost will be shipped via Freight Liner. Freight Charges posted are from our dock to a Business with unloading capability. If you shall require Lift Gate service. And or residential delivery, there will be an additional cost* Please make sure your tel# is posted on Ebay for Freight Co. to get intouch with you at time of delivery. If tel# is not provided. Delivery of freight will be delayed. We do not ship to P.O. Box unless you have no physicall delivery address Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. Shipping Insurance can ... morebe purchased at an extra cost. All items are insured with fedex ground for up to $100 at time of shipping Terms of Sale PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION TO THE BEST OF OUR KNOWLEDGE. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR CONTACT NUMBER IS 718-698-8400 Contact Us Victory Tool Store location 3521 VICTORY BLVD. STATEN ISLAND. NY 10314 WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718-698-8400
These work just fine. I'm including two blocks and one wire. Please see photos and send me any questions you might have. MODEL: A290-8024-v870 Posted with
This machine is not currently wired up. The voltage in my building is too high so I have to install transformers on my equipment. This machine booted up and joged in all directions when I bought it last year. I have never used it. The shop has gone in a different direction and I need to get a cnc lathe so I am selling this to make room. The batteries have been tested and are currently holding power. Equiped with automatic wire feed Color monitor All available manuals come with the machine. The machine requires about 5 x 7 feet and the control unit is 3 x 2 with some flexabiltiy on location. This also comes with a plexyglass wire catching box that is not pictured. Sold not tested as is. Feel free to come by and take a look at it. Rigging and shipping is the buyers responsibility. Forklift rentals are available in the area for around $575 Payment ... moremust be recieved within 5 days via paypal cash or a certified check. A $500 deposit is required via paypal within 24 hours. Update. I now have a backup copy of the machine parameters that can be loaded through the rs232 port if they are ever lost or corrupted. I know this is a concern with older machinery so I make the effort to get them from makino.
Here is a new capstan pulley for a Charmilles Andrews wire EDM. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. Multiple purchases on the same day will only be charged one fee. All international shipments will be through the U.S. post office ONLY. Payment will be via an international money order. Sales tax is charged for PA sales unless exempt*
Item Name: CHMER WIRE EDM CW-360S- NEW 2004 Item# 9959 Price/Each: $54.900.00 Year: 2004 Brand Name: CHMER Model: CW-360S Serial# Asset Tag: Item Location City: SOUTHINGTON State: Connecticut Zip Code: 06795 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description CHMER CW 360S WIRE EDM NEW IN 2004 MACHINE BODY Axis travel(XxYxZ) mm/in 350 x 250 x 220/ 13.7 x 9.8 x 8.6 Auxiliary table travel(UxV) mm/in 60 x 60/ 2.4 x 2.4 Max. size of workpiece mm/in 800 x 560 x 215/ 31.5 x 22 x 8.5 Max. weight of workpiece kg/lb 300/ 660 XY feed rate mm/in Max.800/Max. 31.5inch/min. Axis drive system mm/in AC Servo Motor Wire diameter range mm/in ... moreF0.15~F0.3/ F0.006~F0.012 Max. wire feed rate mm/inch mm/in 300mm/sec/ 11.8inch/sec Wire tension gf 300- 2500 Taper angle mm/in ± 14.5º/ 3.15 Machine dimensions mm/in 2100 x 2800 x 2130(Submerged) mm/in Machine Weight kg/lb 2500/ 5500 SPECS TAKEN FROM SAME MACHINE- NEW- Contact Us About This Machine Should you have questions. Please contact David Drozdenko at 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be book
Here is a Remcor chiller that was used with a wire edm. It was tested and works fine. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Contact me at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. Sales tax is charged for PA sales unless exempt*
Here is a Brother HS300 wire edm. The X and Y travels are 10.2" x 6.3" and the max thickness is 3.9" It has closed loop glass scale feedback for positioning. It is wired 230 volts 3-phase. A copy of the manuals is included. The floor space requirement is about 3 1/2 ft wide x 6 ft deep including the machine. Pumps, and filter. It has a new filter and I have posted a movie of it running on YouTube. http:youtu.be/AG35CGhFQno The resin bottle shown is not included. I have a small empty one I can include. Payment is to be made with a check or wire transfer. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Contact me at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. Sales tax is charged ... morefor PA sales unless exempt*
For auction is an Erowa clamping set for use with wire EDM. The set is in great used condition. It's mostly complete but the the three small threaded washers that come with the set are missing. Posted with
Item Description AGIE WIRE EDM AGIECUT SPRINT 20 WWEDM003. Model Year: 1990 Model: Agiecut Sprint 20 X-axis travel: 12” Y-axis travel: 8” Z-axis travel: 7.3” EXCELLENT CONDITION NEWER OPERATING SOFTWARE INCLUDED Refund Policy We offer a 5 day DOA exchange policy(All shipping/handling cost are the buyer's responsibility) DOA item must be returned for RMA inspection, If exchange is not possible. A refund will be issued less shipping/handling Monday-Friday 8:00am-4:00pm( EST)Eastern Standard Time We can be reached at 905-635-7530 ext.21 or cel# 905-630-5911 Payment Terms We prefer payments to be made by bank transfer. International buyers must pay b y bank transfer. For Canadian& US buyers. We accept Paypal up to $500.00 US Max. Auctions over US$500.00 must pay by wire transfer within 24 business hours from auction close. Payment must ... morebe received by our bank within 48 business hours after auction closes. If payment terms are not met. Item will be relisted or offered to the under bidder without further notice. An Unpaid Item Dispute WILL be filed for ALL unpaid items after 7 days as allowed by eBay and are subject to relisting Customs brokerage fees and duty charges may apply. Ontario Residents please add 5%GST and 8%PST. Shipping Info Canadian and US Buyer s to prepay actual shipping costs. Loading. Skidding, Crating or Special Packaging Fee may apply to the item being auctioned if required. Charges will be determined according to the size and sensitivity of the item. Item will be shipped 3-5 business days after payment has been secured. All items will be shipped with insurance equal to the winning bid amount. Paypal payments will be shipped to confirmed addresses ONLY! All winner notifications will be sent to the email address that is registered with EBay. We reserve the right to cancel your bid if you have a feedback rating of 9 or less or have been a non-conforming bidder in the past. We reserve the right to cancel the auction at anytime due to private sale. CALL OR E-MAIL US FOR A SHIPPING QUOTE. GREAT R
Item#2014 CHARMILLES 440CC WIRE TYPE EDM Equipped With: Machine Specifications: Table Size: 35.43" x 23.62" Maximum Workpiece Dimensions: 47.24" x 27.55" x 15.7" Maximum Workipiece Weight: 3307 lbs Machining Stroke( X x Y x Z) 21.65" x 13.78" x 15.7" U/V Travel: 21.65 x 13.77" Wire Diameters: 004" 012" Wire Spool Size: 17.7 lbs. Taper Capacity: 0 to 30 Degrees Utilization: 4000 Hours Approximate Dimensions: 105"LR) X 110"FB) X 85"H) Year Mfg. 2006 Shipping Point: Price $126.500.00*SPECIFICATIONS SUBJECT TO VERIFICATION* Rigging and Hauling Not Included Call Kevin Brewster for all your equipment questions– P.203-441-4655– C.860-483-0905 o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13e24d70d15-0xff-
1996 SODICK A320D EX21 Non AWT Wire EDM X Axis Travel: 12.59 Y Axis Travel: 7.87 Z Axis Travel: 6.88 Machine Dimensions: 67" x 72" x 71" Weight: 5.200 Lbs Newer Chiller. Good Running Condition Video of machine running is on YouTube: http:youtu.be/eZU1mS8wACY MACHINE IS SOLD AS IS WITH NO WARRANTY Machine has been disconnected and is at my riggers warehouse in Branchburg NJ. Will load on your truck at no additional cost. Contact Dennis Sharples with any questions. 908-752-0042
System 3R Wire EDM Guide Indicator AC 3R-220.4 10 lbs THERE IS A $15.00 HANDELING FEE INCLUDED IN ALL INTERNATIONAL SALES ALL ITEMS SOLD AS IS. WHERE IS. stock# 2021
I am looking for Brother wire edm parts machines. Please call 610-932-4019 or email when you list on ebay. NOTHING IS FOR SALE IN THIS LISTING
WE REGULARLY LIST UP TO 5 OR MORE LISTINGS PER WEEK. WE BROKER THE MAJORITY OF MACHINES LISTED WHICH ALLOWS US TO OFFER OUR CUSTOMERS A LOWER PURCHASE PRICE. ADDITIONALLY THE MACHINES WE OFFER ARE ALWAYS UNDER POWER FOR INSPECTION. WE ALWAYS CONSIDER ALL REASONABLE OFFERS AND MANY ARE PROMPTLY ACCEPTED! You are invited to purchase or"MAKE YOUR BEST OFFER" ON A CNC WIRE EDM being a C HARMILLES ROBOFIL 310. AUTO WIRE THREADING, 3- R RAILS in a" completely refur bished" EX CELENT CON DITION and with the following approximate specifications: Approximate Specifications: Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Make: Charmilles Model: Robofil 310 Year: 1992 Completely Refurbished: 2012 Work-Table Travels: X Axis Travel: 9.85" Y Axis Travel: ... more15.75" Z AxisTravel: 15.75" Taper Angle: 0-30° Wire Diameter: 0.004"0.012" Maximum Work Piece Size: 33.5" x 19.7" x 15.75" Automatic Wire Thread: YES Submerged: NO Maximum Work Piece Weight:1.100lbs Weight of Machine unit: 5500lb Machine Dimensions: 71” x 63” x 78” Equipped With: Chiller System 3R Rails All available manuals CONDITION: Excellent Condition! Mfg Date: 1992 Location: Toronto. Canada Can be inspected under power Will Load at No-Cost to Buyer This CNC WIRE EDM being a C HARMILLES ROBOFIL 310. AUTO WIRE THREADING, 3- R RAILS in a" completely refur bished" EX CELENT CON DITION is known to be in a"Very Good Used Condition" and can be inspected by calling 606 882 2765 for appointment. Please review our"Feedback and About Us" where you will find that we ALWAYS try to fairly describe all items and offer a 7 day return guarantee(freight prepaid) if item is not as listed. For items ship
Here is a lot of control circuit boards from a Hitachi wire edm. The control worked fine except for a problem with a motor driver and/or servo motor that the original owner couldn't get fixed. Those driver boards were on the machine. All of the boards selling here were in the stand alone cabinet. The following is a list of the major boards and parts I have itemized. I also include individual prices if you want me to list anything separately on ebay. The second group of pictures shows smaller boards and power supplies with no list. Everything shown is included in the lot price for this listing. SMU.FGDC $ 1000.00(4) MPLSD $ 800.00 each GENSEQ $ 800.00 IOU $ 800.00 GAPDET $ 800.00 GENCNT $ 800.00 MACOPE $ 800.00 WWCIO $ 800.00 MCU $ 800.00 SPLSD $ 800.00 FFFDRV $ 450.00 pendant $ 450.00 monitor $ 350.00 touch pad $ 225.00 All sales are ... morefinal and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Email me direct at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. All international bidders are subject to a $20.00 fee to cover additional paperwork. All international shipments will be through the U.S. post office ONLY. Sales tax is charged for PA sales unless exempt*
Mixed manuals. Some tapes and what appears to be fuses are also included.
Hi. I am regretfully selling my Fanuc wire EDM. I had all intentions of setting this machine up, but many months later, it does not look like this is happening, so time to make some space and recoup some capital. Specs: YR: 1988. Model: Pratt and Whitney TapeCut W2 Table: 13.5x19" Taper: unk Self-threading: unk Speed: unk Submerged: No. RS232 connection: YES Includes: Reservoirs. Pumps, plumbing, new bag resin, brass wire, many new parts(diamond guides incl) Ask any questions. I can look up the info) and submit your best offer, we can load for no fee. With the RS232 connection, there is information on setting baud rate and connecting with an older computer running which you can connect to your main computer, many of done it. Weight: aprox 4000lbs. I will host more pictures when I find them.
MITSUBISHI WIRE EDM MACHINE MODEL DWC-110-HA RUNS PERFECTLY ONLY SERVICED BY MITSUBISHI IN CALIFORNIA. READY TO PUT IN SERVICE YEAR 1991 TRAVELS( X& Y) 11.81 X 17.72" TABLE 25.59 X 23.62" WIRE DIAMETER.004" 013" MAX AMPERAGE 50 AMPS. MANY ROLLS OF NEW WIRE. LOTS OF CLAMPING BOLTS. FULLY COMPLETE. CUSTOMER USED THIS MACHINE FOR A TRADE IN FOR A NEW LATHE AND WE HAVE IT PRICED TO SELL FAST. SELLING FOR ONLY $ 7,900.00 CALL TODD@ WEBB MACHINERY. CORONA, CA 951/277-8885
This is an early'90's machine that I bought several years ago(probably five) for a project. I had a tech from Mitsu install the machine and get it into factory spec. I never operated nor brought the dielectric system up to speed. The project never took off and I never used the machine. The machine has set idle since that time. It is still connected to power. But the back-up battery died and dumped the software. I have it on diskettes. I don't know if the machine is worth it to make operable or is just good for parts. Buyer will need to load. It is hooked up to a phase converter that is NOT included in the price. I don't know what it's worth and I have much MUCH more in it that I'm asking. Typical, right? BUYER MUST ARRANGE DIS-ASSEMBLY LOADING AND SHIPPING. PAYMENT MUST BE MADE WITHIN FIVE DAYS OF AUCTION END!
Cnc fanuc with Pendant Controller. Type A04B-0224-B211-max tool size mm. 450x650x300-max tool weight kg. 500-table stroke mm. 350x500-tank capacity lt. 300-max table speed mm. 900/min. thread coil weight kg. 5-Remcor Chiller-Filter system.
Up for auction is a used set of Diamond guides for a Mitsubishi Wire EDM machine. these are for wire size 0.25 MM. It is a comlete set of an Upper and a Lower guide. These will fit a BA8 Machine or similiar type. These would be great to use for cuttting tapers or rough cuttting and save wear and tear on your newer guides. Please feel free to contact me with any questions you may have. Posted with
Low hours Sodick AQ325L made in year 2000. In really good condition and runs great. Includes reservoir tank. Chiller and jumbo spool feeder. Model- AQ325L Machine number- 290 Manufacture date: 5/2000 Table Travel X Axis- 13.7" Y Axis- 9.8" Z Axis- 8.6" Taper Angle 20* at 3.1" Workable Wire Diamete.004"012" With AWT capability Wire Feed Speed 250 mm-9.8"sec Max Work Piece Weight 990 Lbs Machine Weight 6160 Lbs This machine is in very good working conditions and has been used very little. It has just gone through its maintenance cycle and replaced x and y axis seals. It has brand new filters and carbide wire guides. It is also connected and can be inspected in running conditions. If you have further questions on this WEDM please feel free to contact me at any time. Thank you. And Happy Bidding
Willing to take offers. Just message me. These work just fine. I'm including two blocks and two wires. Please see photos and send me any questions you might have. MODEL: A290-8024-v870 Posted with eBay Mobile
You get Both Opened spools for 1 price. This auction is for 2 Open Spools of EDM Wire. Combined Weight is over 10 Lbs including spools. Type is SW-S& SW-25. Comes as shown so use zoom and examine pictures closely to be sure this will work for your application. Selling as is No Returns. Shipping will be Calculated which includes Delivery Confirmation. PAYPAL ONLY. Please visit my EBAY store to see if there is anything else you might be interested in. Currently have some Other EDM Wire. Machinist Tools, Brass Valves, Fittings, Cable Zip Tie Assortment, Transducers, Electronic probes, Gloves, micrometers, dial gages, Copper wire, EDM wire, resistors, books, cable zip ties, DVD,s fishing reels, small tools, and I have many used parts for engines and other items If you do not see what you need in any of my other auctions please e-mail me thru ... moreEBAY. If I have it I'll list it. I will be listing more items daily so check my store often for more bargains. Thanks for looking. Happy Bidding! International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. On Jan-14-12 at 08:43:55 PST. Seller added the following information:
WIRE EDM SQUARING ALIGNMENT TOOL DEVICE. GREAT SHAPE AS SHOWN IN PHOTOS. TESTED, WORKING. COMES WITH AC ADAPTER.
Reduced EDM time up to 50% Uniform Electrode Wear Exact Electrode Alignment(0001” over 4 inches) is obtained by a Two-Way Tilting and Centering Adjustment of Built-in Centri-Tilt® Mounts to Any Vertical Ram or Wire EDM Machine and any Tooling System Drive Unit has a Closed Loop Speed Control System for High H.P. at Low Speeds Pressure or Suction Flushing Capabilities The feature of the Rotobore® is its ability to dramatically reduce EDM cutting time by providing improved flushing and uniform electrode wear. The rotation provided by the Rotobore® system assists in the flushing of debris and assures that the hole produced will be perfectly round. The Rotobore® is a complete rotating spindle system for any vertical ram or wire EDM machine. Class 7 bearings provide extremely high rotational accuracy. This allows EDMing of ... moreboth small and large. Perfectly round and straight holes to extremely tight tolerances. Accurate centering and alignment of electrodes to within.0001” over 4 inches are provided by a unique built-in centering and tilting system. The Centri-Tilt®. The Centri-Tilt® provides a two axis tilt mechanism to obtain electrode parallelism to the ram and a two way shift centering mechanism to eliminate electrode runout, regardless of the size of the electrode. Flexible Drive Shaft TYPE: RBH-1C 35 AM PS 7 5 PSI
MITSUBISHI HA SERIES WIRE EDM AUXILIARY MANUALS Click Images to Enlarge ​MITSUBISHI HA SERIES WIRE EDM AUXILIARY MANUALS COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 3 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing ... morestandard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. We do NOT accept PAYPAL for items being picked up. Please contact us if you would like to pick up your items. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To fin
8 set of upper and lower guides for fanuc wire edm. Used I think 7 are.25 and 1 is.20 Posted with
system 3r pre-setup station granite plate with bar granite size is 8 inch long x 6 inch wide x 4 inch thick holding system with supervise and the vise outside measurement is 5 1/2 inch. the second sliding block I do not know what it is called. free shipping lower 48 states
Item Information Item Name: Mitsubishi FX-10 CNC Wire EDM- 1996- 5 Axis Item# 10368 Price/Each: $47.000.00 Year: 1996 Brand Name: Mitsubishi Model: FX-10 Serial# Asset Tag: Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Item Description MAKE AN OFFER! SELLER IS WILLING TO ENTERTAIN REASONABLE OFFERS! Mitsubishi FX-10 5-Axis Wire EDM Year: 1996 Model: FX-10 Specification: X-Axis travel: 13.77" Y-Axis travel: 9.84" Z-Axis travel: 8.66" U-Axis travel: 1.25" V-Axis travel: 1.25" Max. work-piece size: 31.49" X 22.63" X 8.64" Maximum taper angle: 17 Degrees@ 3.93" work height Wire diameter: 0.012" to 0.008" Wire spooling speed: 0 to 9.8 inches per second Equipped With: 105 Gallon dielectric reservoir MAKE AN OFFER! SELLER IS WILLING TO ENTERTAIN REASONABLE ... moreOFFERS! Contact Us About This Machine Should you have questions. Please contact Tim Staino at(860) 484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments are to be made through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But
Here is a Brother HS100 submerged wire edm. The X and Y travels are 10.2" x 6.3" and the max thickness is 3.9" It has closed loop glass scale feedback for positioning. It is wired 230 volts 3-phase. The dimensions are 34" x 27" x 64" tall. It powers up and the crt comes on. But I can't get it to jog. I also have most of the parts from a couple of other machines in unknown condition that can be purchased separately after the machine sells. All sales are final and are AS-IS with no warranty. I try to represent the condition the best that I can. If you have questions. Contact me at warren9@zoominternet.net or call 610-932-4019. All transactions are governed by the laws in place in Lewisville. PA. Sales tax is charged for PA sales unless exempt*
For action 2 Yaskawa Servo Packs CPCR-01-SD1A 1 newly rebuilt by NC Servo technology in Westland MI cost was 1500.00 also are all the electrical boards/CPU/ I/O/ mother board/Total of 6 Boards From A Sodick BF 250 that developed a issue with an axis motor and was scraped machine did boot up but gave heat stop alarm Boards should be tested items are AS IS all items are in sealed plastic would like to sell all items as a package DEAL PLEASE!
Hitachi Hcut 203Q 4 axis Wire EDM. Travels 12.59" in X, 9.84" in Y, max height 6.2" the machine is under power and used daily. It had an auto threader but is was removed before I purchased the machine. It is threaded manually. The dirty water pump has been replaced a Dayton pump. The filter is a single Ebbco. The machine is 80" X 73" X 76" and weighs 4,000 lb. I will load the machine.
1998 Mitsubishi FX30K Wire EDM. Machine was well maintained and is in good running condition. Has Glass Scales. Table Size 51.2 x 31.4 X Axis Travel 29.52 x Y Axis Travel 19.86 x Z Axis Travel 13.78 208 Volt 3 Phase Power. See Youtube link: http:youtu.be/MJM3CZ5z28s Contact Dennis Sharples with any questions#908-752-0042
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 05130380003 Manufacturer: MITSUBISHI Description: MITSUBISHI DWC90C-1 WIRE EDM Capacity: Model Number: DWC90C-1 Serial Number: 539D1202 Additional Information: CONTAINS 4 PIECES BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE SURE TO INCLU
FOR MORE INFORMATION. PLEASE CONTACT: KENNY BERGER- HASCO MACHINERY 732-446-9531(best way to reach) Charmilles RoboFil 6000 CNC Wire EDM Machine Specs tank area 49.4"x 28.5" x 17.1" Maxi part sizes 47" x 27.9" Max part weight 1102 lbs Max Height 7.8" strokes x.Y,z 24.8" x 15.7" x 6.3" Tank sizes 45.2" x 35.4" x 89.76" Equipped with Cooling Unit Auto Rethreading double disc Misc Transformer Price $ 9.500.00
I have a Charmilles Robofil 290 for sale. This machine is in excellent working condition and will be in use until it is sold. So this machine will have no down time which is idea for a wire EDM machine. This machine has been very well maintained and runs extremly well.
AGIE Wire EDM machine used. But still working part. Comes with two of these parts. We sold our wire machine and are left with some extra parts. The parts number is 419.054 Please see the other auctions that we have listed that include our other extra parts for the AGIE EDM Wire machine. Thanks for looking. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f3e8256e0-0xff-
Agie 100/200/300 Series Wire EDM High Pressure Flushing Pump. Bought at auction. No way to test it. So unsure if it works. Info from the motor: Unitec AG Kloten Switzerland M typ SLf 71 B 2/84 220/380 V 2.37/1.37 A.55 k@ cos.85 50/60 Hz.75 HP 2810/3370 UpM If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and other tool making items. Good luck and happy bidding.
Description Hirschmann System 4000 Wire EDM H4620"Mighty" Vise Excellent Working& Cosmetic Condition Clamping range 0-160 mm(0-6.299" Max. workpiece weight 15 kg(33 lbs) Weight of the vise 2 kg(4.40 lbs) Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools ... moreand metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
You are bidding on a lot of used parts that belonged to my Agie 250/612/315/100/200/300. What you see Is what you get. Not pictured is a brand new flushing head for a 100/200/300 part number 24.02/948. We have an upper head. Carbide contact holder, and another piece of the head for the 250/612/315 machines. The O-rings and used carbide contacts are for the 100/200/300 machines. If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and other tool making items. Good luck and happy bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f4627815f-0xfc-
Gold International Machinery Corporation | Mitsubishi CNC Wire EDM Model# RA90 Our Inventory Number: 9175-505 Technical Specifications: Model: RA-90, Serial No. D90M0205A, New: 2005, Max. workpiece dimension[mm] 860 x 760 x 160, Maximum workpiece weight: 350, Table dimensions: 572 x 478, Machining range(X x Y) 320 x 250, Table rapid-feed speed[mm/min] 1300, Wire dia meter[mm] 0.2- 0.3, Maximum wire feed rate[m/min] 15, Taper machining device: Standard, Z-Axis stroke(manual operation) 165, Max. taper angle[mm] 15 for workpiece 100 mm thick, Max. machining current: 50 A, Display: 10.4" color LCD, Minimum drive unit[u m] 0.05 um, Equipped With: Mitsubishi CNC Controls, Mitsubishi Model HE-SV50-W1 Cooler Unit, Serial No 05D9m202, This item is in very good condition! We can palletize. Cover and load this item for an additional fee. Please ... moreinquire. We will load your truck for free from our adjustable loading dock(not crated) Thank you for taking the time to visit our eBay auctions. Our company is a third generation family owned machine dealer with over 50 years experience in the field. We’re conveniently located on the East Coast between Boston and New York. We have a staff of professionals with a broad range of technical and international marketing skills. All dedicated to keeping Gold International on the cutting edge of the marketplace by offering State-of-the-art equipment, technology, and complete service. We offer machinery both New and Second Hand. Our 85.000 square foot Showroom/Warehouse facility is located at the Foot Of Exit#26 off Interstate Route 95 North in Pawtucket. Rhode Island. We are always ready to serve our customers. Our visibility and strength in the marketplace is not accidental, but rather occurs by careful design. Our company representatives attend trade shows in Europe, the Far East and the Americas to maintain our leadership position by channeling our energies to the constant but ever-changing process of finding, cultivating and satisfying our clientele’s m
This machine is in very good running condition and is cutting parts every day. This machine is good for cutting large work pieces. It also has regular P.M checks done by experienced Mitsubishi technicians. There will be no tooling sold with this machine. It will continue to cut parts up until the day it is sold and it will be packed by a Mitsubishi technician unless the buyer says otherwise.
FOR SALE: MITSUBISHI Model FX-10K CNC Wire EDM with Options SPECIFICATIONS: Mitsubishi FX10K CNC Wire EDM(Electrical Discharge Machine) Manufacturer: Mitsubishi Model# FX-10K Age: 1998 Control: Mitsubishi W1 1 FX2 CNC Control Max Work Piece Size: 31.50" x 22.63" x 8.46" UV Travels: 1.25" 1.25" Max Work Piece Height: 8.66" Travels(X.Y,Z) 13.77" x 9.84" x 8.66" Work Piece Weight: 1,102 Lbs. Wire Diameter: 004" 012" Wire Speed: 15/MIN 590 ipm Taper Cut: 17 Degrees@ 3.93" Work Height Power Supply Amps: 50 Amps Equipped With: Mitsubishi W1 1 FX2 CNC Control and Power Supply. Tank for Submerged Cutting, Automatic Wire Threading, Wire Guide, Squaring Block, Dielectric System, Chiller, Manuals. Electrics: 220 Volt, 3 Phase Approximate Weight: 4070 lbs. Contact: biomedtool@yahoo.com Purchasing ... moreInformation: Payment must clear prior to shipment or pick up Payment methods include wire transfer. Certified check, personal/business check and paypal Warranty: Machine is in good working order and tested Freight and Shipping: Shipping/Trucking charge is not included in the machine price We coordinate shipping for you with professional trucking companies About Us and Our Mission: We are a consortium of three divisions selling biomedical. Scientific and cutting equipment. We have hundreds of pieces of equipment available for sale. We have decided to start listing on EBAY. We make sure to have the equipment tested prior to listing them. You will be buying from a company that has partners in Pediatrics. Cardio, Veterinary Medicine, Scientific Research, Bio-Chemistry, Tooling, Cutting Companies, etc. Please feel free to message us at: biomedtool@yahoo.com
Agie 100/200/300 Wire EDM U/V Head Stepper Motor for U& V Axis. Used. But worked when taken off. Sold the machine, kept the parts. If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and other tool making items. Good luck and happy bidding.
1993 Mitsubishi Model DWC-90HA Wire EDM Auto-Thread Manufacturer: MITSUBISHI Product Condition: Run under power. Tested, ready to ship. Warranty Included Contact: sales@nemachinery.com Mitsubishi DWC-90HA EDM Manufacturer: Mitsubishi Year: 1993 Overview: Advanced Precision Technology Meeting Needs For Factory Automation* Extra-Rigid Machine Unit* High-Rigidity Workpiece-Mounting Table* High-Precision Wire-Guide Mechanisms* Diamond-Die Guide System* Dielectric-Fluid Supply System* Heat-Resistant Construction* Tension Mechanism for Wide-Range Stability* Dielectric-Fluid Temperature-Control Unit* High-Performance Power Supply Further Increases the Machining Range Machine Travels( X. Y) 11.81" x 9.84" x 6.89" Machining Travels( U. V) 1.0" x 1.0" Taper Capacity +/ 12 Deg in 2.36" Max Workpiece Weight 386 Lbs. Table ... moreDimensions 16.5" x 20.1" Wire Diameter Range Capability.004" x.013" Wire Guide Sets Included.000010" Rapid Rate 33.5 IPM Drive Method AC Servo Motors(Closed Loop) Mfg Rated Maximum Cutting Speed 23.25 sq in/hr Filtration System Dimensions 42" x 26" x 41" Filtration System Weight 375 Lbs. Dry Machine Dimensions 55" x 46" 73" Machine Weight 2.425 Lbs Equipped With: Mitsubishi G25B Power Supply* Mitsubishi 32-Bit CNC Control* Automatic Wire Threader- Waterjet Type(AF1) Non-submerged Machining Capability* 12" Color CRT w/ 3-D Graphics* Filtration System* Worklight* Air Cooling Unit* All Available Manuals and Accessories PAYMENT OPTIONS: Payments can be made by Bank Wire. Check, Paypal, Money Order or Cashier's Check. All payments must be received within 7 business days. We look forward to doing business with you. SHIPPING: Buyer can schedule pick up via TRUCK or we can schedule delivery for you and add the freight cost. Buyer is responsible or assumes liability that machine gets properly tied down and shipped safely. Buyer can have equipment shipped anywhere Worldwide. Buyer is responsible for all arrangements and cost
1995 Sodick A530D EX21 Control Control with graphics. X- Travel: 19.6" Y- Travel: 12.5" Z- Height: 10.6" Auto threader. Wire chopper and penant control, and custom rails for workholding. Machine is in very good condition. Chiller needs freon. Local Pick-Up but we can help find machinery mover. If you have any questions or need any additional photo's let us know.
EDM WIRE 0.008"0.20MM 11LBS/5KGS
This is a used operating& programing manual for a Elox series 300 Wire EDM machine. It is in very good condtion. No missing or damaged pages. Look close and make shure this matches your machine- no returns.Shipping to the lower 48 is a flat $5.00. Thanks for looking 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13fb6988571-0xfe-
SODICK WIRE EDM CNC CIRCUIT BOARD PULLED FROM MACHINE BEING PARTED OUT FOR MECH ISSUES MODEL HR-MOS-02B SEE PICTURES THANKS FOR LOOKING! INVENTORY LOCATION:
You are bidding on a lot of LAMA 16C software from Agie for its Wire EDM machines. I have a ton of this stuff. So contact me if you'd like any more of it. It comes on 3 1/2" floppy disks as pictured. If you have any additional questions. Feel free to contact me. No returns or refunds, all sales final. No international shipping. Email me before bidding if you have zero feedback. Please see my other auctions for additional gages, micrometers, and other tool making items. Good luck and happy bidding.
This book is Like New. In Excellent Condition. Except for the name written as seen in pics. ISBN 10: 0961081023/ 0-9610810-2-3 ISBN 13: 9780961081027 Publisher: Natl Tooling& Machining Assn Publication Date: 1992 Binding: Hardcover 132 pgs.
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking 11.8" Y 17.8" X Makino SP43 WIRE-TYPE EDM. AUTO THREADING, SUBMERSIBLE, MAKINO C MAKINO CNC WIRE EDM. SUBMERSIBLE MACHINING, AUTO WIRE THREADING MODEL: SP43 S/N: W7264 NEW: 2005 MAKINO MGW-S ... moreCNC CONTROL MACHINE HAS 4.738 HOURS RUN TIME! Preliminary Specifications: Table Size: 28.7" x 22.8" X: 17.8" Y: 11.8" Z: 12.6" U/V Travel: +/ 3.9" Taper Cut +/ 15 Deg. Optional +/ 35 Deg. 3.9" Tank Size: 35" x 33.5" x 15.9" Maximum Workpiece Weight: 1.764 lbs Maximum Workpiece Size: 33.5" x 28.3" x 12.6" Available Wire Size: 0.004" 0.006" 0.008" 0.010" 0.012" Drop Tank: No Actual Dimensions of Machine: 86" x 114" x 89"H Approx. Floor Space Recommended for Operation by the Manufacturer: 119" x 162" x 95.5"H"The SP43 machine is an extremely fast wire-cutting machine, able to hold tolerances of ±5 microns. The unit can be used for many diverse applications. From tall workpieces to precision small holes. The SP43 generates a surface finish of 16µmRy on one pass, shape accuracy of three-pass machining in just two passes with a surface finish 12µmRy and a surface finish of 4µmRy with an overall speed of 94mm2/min. in three-pass machining. The programmable auto-threading unit of the SP43 has a 15-second thread time. Field-proven. Two-piece&quo
Questions? Call us: 1-877-328-9236. 7) Mitsubishi Diacut 10 Tooling 0.10mm EDM Wire 1.60kg Spools. Manufacturer: Mitsubishi Model: Diacut 10 Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Mitsubishi Condition: Used. Comes in factory original packaging. Notes: No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 7) Mitsubishi Diacut 10 EDM Wire Spools, Specifications: Manufacturer: Mitsubishi, Model: Diacut 10, Description: EDM Wire, Wire Diameter: 0.10 mm, Weight(each) 1.60 kg, Condition: New Other, Quantity: 1 Spool, SKU: N28P019 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 ... moreand OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and their direct employees. Warranty. This item is guaranteed to be as described. The buyer must notify us within 14 days of receipt
Two manuals one MARK 25 CONTROL Wire EDM Machine operation training The other A SERIES With Mark 25 power supply Machining Condition Table inch These are used and dirty but all the pages are there they are not torn are stuck together. Please look at the pictures and ask any questions Posted with
Sodick wire EDM parts Rubber gaskets New fuses Nozzles springs for the seals Grease for the tank Plastic wipers for the back of the tank O rings Software Impact new in case never opened Sodick Mark 25 system software Version 4.00 H This software is expensive through Sodick And a disk given to you at Sodick training classes with toy programs on it Please look at the pictures and ask any questions Posted with
We are pleased to offer the following for your consideration: One used Fanuc Robocut-A-OID Submerged Cutting CNC Wire EDM New: 2010- With 6267 Cutting Hours Specifications: Table Travel. 14.6" x 10.6" x 10.2" Internal Work Tank Size. 30.5" x 23.6" x 9.8" Max. Workpiece Weight. 1.100 Lbs Automatic Wire Feed System 35 Pound Spool Chiller Unit For DIelectrical Fluid Fanuc Filtration System AC/DC Power Supply Submerged Cutting Capacity 15" Color ICD Touch Screen Conversational Programming Adaptive Control Ethernet Port/PCMCIA Slot/ 2) USB Ports Cutting Time 6267 Cut Time Ready To Ship 10/1/2013 Price: $69.500.00 Click picture for more views PRIDE MACHINERY SALES. INC. TEL-631-586-5252. EMAIL:
UP FOR AUCTION IS A USED SYSTEM 3R WIRE EDM RAIL. THIS AUCTION IF FOR THE RAIL ONLY. THE RAIL NEEDS TO BE CLEANED AND THERE ARE 2 SMALL CUTS FROM PRVIOUS USE. SEE PICTURES FOR CONDITON. THE RAIL IS HARDENED STAINLESS STEEL. PLEASE EMAIL WITH ANY QUESTIONS. THANKS FOR LOOKING. Check out my other items! c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13fdfde1af0-0xee-
Stainless Clamp 1/2 x 1x3. Has slight bend in it Jack stand 1 1/4 DIA. 1 3/4 long on the base screws out to 3 3/4 high with a 1 inch DIA pad on top Screw extension 2 inches long metric Two small clamps and one piece to go under a rail with clearance for the head The pieces are used and dirty Please look at the pictures ask any questions and Posted with
Roll of Gisco brass EDM wire no rust 4 lb roll. Made in Germany 0.25mm.010 T/S 600-700 N/mm YD:4.050 Nr: 452 Fa NEED A REBUILD? NEED A REPAIR? NEED ADVISE? NEED A MACHINE NOT LISTED PLEASE CALL: DAN’S MACHINE TOOL. INC. WITH ANY QUESTIONS…714) 666-1266 OVER 30 YRS OF REPAIR AND REBUILDING EXPERIENCE ON ALL METAL WORKING MACHINERY INCLUDING BUT NOT LIMITED TO ACRA. BRIDGEPORT, CINCINNATI, HARDINGE, LAGUN, LE BLOND, KENT. SCOTCHMAN DAN’S MACHINE TOOL. INC. SPECIALIZES IN REPAIR& REBUILD, NEW& USED TOOLING, SALES OF NEW AND PREOWNED MACHINES, MANY IN STOCK: MILLS, LATHES, GRINDERS, BANDSAWS, WE STRIVE TO PROVIDE OUTSTANDING CUSTOMER SERVICE. AS OUR CUSTOMERS ARE THE CORE OF OUR BUSINESS! IRONWORKERS…ALL UNDER POWER 1260 N. SUNSHINE WAY ANAHEIM. CA 92806 NEW PHONE# 714) 666-1266 FAX 714) 666-1269 SHIPPING: PLEASE SEE ITEM FOR PRICING ... moreFREIGHT: ANY ITEM WEIGHING OVER 149lbs CRATING SERVICES: We offer crating services on all freight items. Pricing for crating is different for each item Please call for details WE WILL GLADLY LOAD ANY FREIGHT ITEM ON YOUR TRUCK OR FREIGHT CARRIER FOR FREE! SALES TAX: ALL CALIFORNIA BUYERS MUST PAY 8% SALES TAX Posted with
Auto Threading(Yes/No) Yes. Submerged(Yes/No) Yes. Spec Sheet: SPECIFICATIONS: X-AXIS TRAVEL. 13" Y-AXIS TRAVEL. 8" Z-AXIS TRAVEL. 8.8" U& V) ANGLE. +/ 15 DEG.MAX. WORKPIECE DIMENSIONS. 31.8" x 22.8" x 8.8"HTOTAL WEIGHT. 5.200 LBS. EQUIPPED WITH: AGIE CNC CONTROL W/CRT DISPLAYREMOTE OPERATOR CONTROL RS-232 PORT& FLOPPY DISK DRIVENON-SUBMERGED CUTTINGAUTOMATIC WIRE THREADING(AWT)CHILLERBIG DIELECTRIC SYSTEM Control: AGIEMATIC CF. Description. Agiematic CD s/n 403 Agieplus HMC s/n 011 DA-18 s/n 010 Agiecut Sprint s/n 010 1995. Updated 2006 Renco Chiller model CH 2002A Transformer 30 KVA primary 240 delta- 240Y ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13fe8bfaa72-0x103-
Rotobore EDM Spindle. Used for EDM machining or EDM drilling with brass or coper tubes. Variable rotating speed. good condition. Check the store for other items.
EROWA stainless steel wire edm holding fixture. Item is like new. Holds up to 4-3/8 thick.
Title: Sawamura DC Geared Motor Off Fanuc Robocut Wire EDM SS32G-H3RLN. 8RL-DW25W850 Description: Our Internal Stock# C58- 07-19-13 RN) You are about to purchase the following item: 1- Sawamura DC Geared Motor Off Fanuc Robocut Wire EDM SS32G-H3RLN. 8RL-DW25W850 Model# SS32G-H3RLN Type# A90L-0001-0404/ M DC 12V 14W 2500 RPM Manufactured By: Sawamura Denki Kogyo Co. Ltd. Equipped with: Yokogawa Gear reduction Unit Type# 8RL-DW25W850 This Motor was Used on a Fanuc Robocut Wire EDM Machine. Equipped with: 16-WA CNC Controller Unit Approx. Date of Manufacture: 1993/1994 Made in Japan This Item is Used. Being Sold in GOOD WORKING Condition Full 30 day return privilege if found defective(freight prepaid by buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will ... morebe receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! Send us a message if you have a question about shipping your item. All items that are bought and payed for before 4 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack
Title: Ogura Clutch off of Fanuc Robocut Wire EDM. Mod# OPB 20-02, 24VDC, Used Description: Our Internal Stock# C58-15(07-19-13 RN) You are about to purchase the following item: 1- Ogura Clutch off of Fanuc Robocut Wire EDM. Mod# OPB 20-02, 24VDC, Used Model# OPB 20-02 24 VDC 30 RPM Ser. No. C-C 038 MADE IN JAPAN THIS UNIT CAME OFF OF A FANUC ROBOCUT CNC WIRE EDM MACHINE. MANUFACTURED APPROX. 1993/94 WAS EQUIPPED WITH FANUC 16-W CONTROLLER. This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 day return privilege if found defective(freight prepaid by buyer) SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible ... morefor ALL shipping fees incurred. We ship worldwide at great rates! Send us a message if you have a question about shipping your item. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege. Unless item it marked“SOLD AS IS” For returns, freight must be pre-paid by the buyer. Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. LET US KNOW, and we will be willing to either replace it or reimburse you for the total cost of what you paid. Payment: PayPal is our preferred method of payment. If you have a question on payment options. Please feel free to call us. Contact Information: First Choice Indus
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 System 3R Tooling Lot of 5 pieces good condition check all pictures Please refer to the shipping calculator for shipping to your zip code. shipping includes insurance and confirmation Disclaimer: Payment must be received within 7 days after the close of the auction. If you have any questions. Please feel free to contact me. Thanks for looking and happy bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1400422eea4-0x101-
wire holder vise for edm machine. There are no numbers on it but I think its by system 3r free shipping lower 48 states
Title: Malhaty Pump Unit off Fanuc Robocut Wire EDM. PH-2063BDR, A-90L-0001-0410, Used Description: Our Internal Stock# G59-8(07-22-13 RN) You are about to purchase the following item: 1- Malhaty Pump Unit off Fanuc Robocut Wire EDM. PH-2063BDR, A-90L-0001-0410, Used Model# PH-2063BDR A-90L-0001-0410 Volts: 200 3 Phase 50/60 Hz 1.14/1.22 A Input: 240/340 W Output: 150/ 200 In door Liq. Temp. 90 degree C Ins. Class E Pipe: 25A(1B) Head: 8/ 11.5- 5.5/ 9 Cap. 26/ 65 Manufactured By: Malhaty Pump Mfg. Co. Ltd. This Unit came off a Fanuc Robocut Wire EDM Manufactured approx. 1995 This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition. Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture ... moreof the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you con