Uryu Seisaku Stanley Pneumatic Nutrunner Uryu Seisaku Ltd Aimco Pneumatic Nut Runner Angle Nutrunner Stanley Pneumatic Pneumatic Nutrunner Wrench Rt Angle Pneumatic Nutrunner Nutrunner 3 8 Nut Runner Angle Wrench Rt Angle Pneumatic Ratchet Wrench 1 4 Drive Air Atlas Copco Ltv Lb Angle Rpm 1 4 Hex Air Ratchet Model Pneumatic Torque Nutrunner Torque Wrench 3 8 Drive Air Ratchet Pneumatic Nutrunner Pneumatic Nutrunner- Electric Nutrunner 1 4 Air Ratchet Pneumatic Nutrunner Air Ratchet Pneumatic Pistol Drive Air Ratchet Air Ratchet Nut Runner Stanley Rt Angle Pneumatic Pneumatic Atlas Copco 3 8 Drive Air Torque Wrench Impact Gun Cooper Tools Air Screwdriver Cleco Air Air Ratchet Wrench Cleco Pneumatic Pneumatic Screwdriver Duty Air Ratchet 3 8 Reversible Atlas Copco Renewed Pistol Grip Screwdriver Cooper Power 1 2 Drive Air Ingersoll Rand 3 8 Right Angle 3 8 Pistol Grip Torque Wrench Air Rachet Atlas Copco Ergopulse Torque Control Drive Air Impact Wrench Pneumatic Air Tools Twin Hammer Air Impact Wrench Ingersoll Rand Impact Wrench Pmax 7 Bar Aviation Tools Pulse Tools Oil Pulse Tools 1 2 Drive 1 2 Impact 1 2 Inch 1 4 Drive 1 4 Hex 1-1 2 2 In Wrench 2 Pneumatic 3 4 Drive 3 8 Dr 3 8 Drive 3 8 Pneumatic 34Raa47ax3 4 Dr 4 Drive 4 Inch 4 Pneumatic 8 Point Socket Air Drill Air Impact Wrench Air Ratchet Air Tools Aircraft Aviation Angle Air Assembly Tools Atlas Copco Central Pneumatic Chicago Pneumatic Cleco Drive Air Drive Pneumatic Ft Lb Gardner Denver Heavy Duty Heavy Duty Air Impact Gun Impact Wrench Impact Wrench 1 Impact Wrench Rebuild Kit Ingersoll Rand Ingersoll Rand Impact Wrench 3 4 261 Kit Mac Tools Matco Tools Pistol Grip Pneumatic Pneumatic 1 Pneumatic Air Pneumatic Impact Pneumatic Impact Wrench Power Tools Ratchet Wrench Right Angle Rpm 3 8 Screw Gun Square Drive Tools 1 Tools 3 8 Torque Wrench Wrench 1 Wrench 1 2 Wrench 3 8 Wrench Model Ingersoll Rand Impact Wrench 3 4 Impact Sockets Air Sockets Ratchet Wrench
 In 
 
Order by: 
Available to: 
Price: 
 - 
$
200
Buy It Now
$17.5 Shipping
Condition: Used
Location: Portland,CT,USA
$
1,199.99
Buy It Now
$0 Shipping
Condition: Used
Location: Redford,MI,USA
$
92.16
Buy It Now
$0 Shipping
Condition: New
Location: Jonestown,PA,USA
$
949.95
Buy It Now
$0 Shipping
Condition: New
Location: Round Rock,TX,USA
$
48
Buy It Now
$8 Shipping
Condition: Used
Location: Las Vegas,NV,USA
$
2,195
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Hudsonville,MI,USA
$
337.5
Buy It Now
Free Shipping
Condition: New – Open box
Location: Grand Rapids,MI,USA
$
74.95
Buy It Now
$0 Shipping
Condition: New
Location: East Greenwich,RI,USA
$
1,250
Buy It Now
Free Shipping
Condition: Used
Location: Las Vegas,NV,USA
$
699.99
Buy It Now
$0 Shipping
Condition: Used
Location: Tomball,TX,USA
$
1,575
Buy It Now
$7.8 Shipping
Condition: Seller refurbished
Location: New Philadelphia,OH,USA
STANLEY A40LB3TPJ-015 INLINE NUT RUNNER 78-155 FT LBS AIR SHUT OFF. J" TORQUE REGULATING VALVE. 3/4' SQUARE DRIVE. TP" AIR ACTUATED SHUT ... moreOFF. 140 RPM MARKED ON TOOL.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13f25570271-0xf8-
$
995
Buy It Now
$29 Shipping
Condition: Used
Location: Beltsville,MD,USA
$
2,700
Buy It Now
Free Shipping
Condition: Used
Location: Altamonte Springs,FL,USA
$
699.99
Buy It Now
Free Shipping
Condition: Used
Location: Moultrie,GA,USA
$
899.99
Buy It Now
$0 Shipping
Condition: Used
Location: Millersburg,IN,USA
$
699.99
Buy It Now
Free Shipping
Condition: Used
Location: Moultrie,GA,USA
$
390.9
Buy It Now
$15 Shipping
Condition: Used
Location: Dallas,TX,USA
This is a precision industrial pneumatic pistol made by Uryu. Distributed in USA by Aimco Shutoff pulse tool. The model number is UX-T1620. 3/4" ... moreSquare Drive. Torque range is 120-210 Nm(87-150 ft.lbs. Weight is 8 pounds. We cannot test for torque output; selling as-is. Tool was removed from a working environment. Please feel free to call Tim if you have questions 214-707-8665. Perfect choice for quick. Inexpensive tooling for your short-term projects. We have more available. Please let us know if you need a different quantity. We have other Makita Cordless items currently up for auction. All brand new. Please bid with confidence with us; our positive feedback will speak volumes. Thank you for shopping and good luck bidding! Bidding: Please. If you’re new to eBay and don’t have your Paypal set up yet, or don’t intend to pay right away, please don’t bid on this item. Payments: We accept Paypal(preferred) No personal checks. Please. Paypal payments must be received within 3 days of auction's close. Shipping: Let’s talk about shipping. We ship via FedEx Ground so we have a REAL tracking number that shows the ACTUAL progress of your package. We will link your email address to this tracking number when we ship. So you can watch also. Shipping quoted based on the Lower 48 States. Hawaii and Alaska buyers should check for shipping quote prior to bidding. We ship to CONFIRMED ADDRESSES ONLY. On occasion, we will ship via FedEx 2-day shipping at our option. We will use USPS only when we have to. As their tracking system is a joke. Shipping for this item will be flat rate. Which includes insurance and a tracking number. We can combine shipping if you like, but you’ll have to tell us what other items you’re bidding on, watching, or won so we can quote combined shipping costs. Shipping typically takes place the day after payment is received or cleared. We will ship via insured FedEx ground in most cases and can provide the tracking numbers. FedEx ground will take 1-3 days to reach most points in the lower 48 states.
$
62.95
Buy It Now
$0 Shipping
Condition: New
Location: Newport,MI,USA
$
279.99
Buy It Now
$0 Shipping
Condition: New
Location: Anaheim,CA,USA
$
15.99
Buy It Now
$5 Shipping
Condition: New
Location: Buffalo Grove,IL,USA
$
22.87
Buy It Now
$0 Shipping
Condition: New
Location: Millington,TN,USA
$
195
Buy It Now
$15.5 Shipping
Condition: Used
Location: Beltsville,MD,USA
$
45.95
Buy It Now
$0 Shipping
Condition: New
Location: Cleveland,OH,USA
$
117.99
Buy It Now
$0 Shipping
Condition: New
Location: Melbourne,FL,USA
$
92.4
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
79
Buy It Now
$18 Shipping
Condition: Used
Location: Phoenixville,PA,USA
$
975
Buy It Now
$15 Shipping
Condition: Used
Location: Beltsville,MD,USA
USED BUT GOOD WORKING CONDITION! DA3-2-1)
$
90.06
Buy It Now
$0 Shipping
Condition: New
Location: Farmington,MO,USA
$
79.95
Buy It Now
$0 Shipping
Condition: New
Location: East Greenwich,RI,USA
$
250
Buy It Now
$15 Shipping
Condition: Used
Location: Beltsville,MD,USA
WORKS OK APPLIED AIR. REVERSIBLE, 3/8" NPT. USED BUT GOOD WORKING CONDITION! DA1-1-9)
$
175
Buy It Now
$15 Shipping
Condition: Used
Location: Beltsville,MD,USA
WORKS OK APPLIED AIR. REVERSIBLE, 3/8" NPT. USED BUT GOOD WORKING CONDITION! DA2-1-4) DA2-1-2)
$
390.93
Buy It Now
Free Shipping
Condition: Used
Location: Canada
$
1,499
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Poland
$
495
Buy It Now
$15 Shipping
Condition: Used
Location: Beltsville,MD,USA
USED BUT GOOD WORKING CONDITION! DA2-1-1)
$
650
Buy It Now
$0 Shipping
Condition: New
Location: Cincinnati,OH,USA
$
186
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
50
Buy It Now
Free Shipping
Condition: New – Open box
Location: Columbus,OH,USA
Universal Tools 3/8" Drive Ratchet Wrench Model# UT-8005 This ratchet wrench is in excellent shape and in perfect working order! Posted with
$
549.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Pneumatic Pulse Hydrotension Impact Wrench by NPK Model: NPW-160PTS Bolt Capacity: 10mm 3/8" Torque Adjustment Range: 36.3-70.6 Nm 27-52 Ft. Lbs ... moreFree Speed: 7000 RPM Overall Length: 211mm 8 5/16 Weight: 2.3 Kg 5.07 Lb Spindle Offset: 32mm 1 1/4" Square Drive: 12.7mm 1/2" Air Inlet Thread: 1/4" Hose Size: 9.5mm 3/8" Average Air Consumption: 8.8 Cfm
$
549.99
Buy It Now
Free Shipping
Condition: New
Location: Romulus,MI,USA
Pneumatic Pulse Impact Wrench By NPK Tool Model: NPW-1400APTS-000 Bolt Capacity: 14mm 9/16" Torque Adjustment Range: 118-167 Nm 87-123 Ft. Lbs Free ... moreSpeed: 3500 RPM Overall Length: 218mm 8 9/16" Square Shank Size: 12.7mm 1/2" Air Inlet Thread: 1/4" Hose Size: 9.5mm 3/8" CFM: 28.3
$
15
Buy It Now
$9 Shipping
Condition: Used
Location: Verona,NJ,USA
$
75
Buy It Now
$13.8 Shipping
Condition: Used
Location: Canyon Lake,TX,USA
$
220.25
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
70.38
Buy It Now
$5 Shipping
Condition: New
Location: USA
$
395
Buy It Now
$0 Shipping
Condition: Used
Location: Beltsville,MD,USA
$
156.4
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
2,450
Buy It Now
$0 Shipping
Condition: New
Location: Baltimore,MD,USA
$
995
Buy It Now
$29 Shipping
Condition: Used
Location: Beltsville,MD,USA
$
52.79
Buy It Now
$5 Shipping
Condition: New
Location: USA
$
189.99
Buy It Now
Free Shipping
Condition: Used
Location: Sunman,IN,USA
$
84
Buy It Now
$0 Shipping
Condition: Used
Location: Venice,FL,USA
$
285
Buy It Now
Free Shipping
Condition: Used
Location: Farmington,MI,USA
$
125
Buy It Now
$9.5 Shipping
Condition: Used
Location: Canyon Lake,TX,USA
$
125
Buy It Now
$9.5 Shipping
Condition: Used
Location: Canyon Lake,TX,USA
$
96.72
Buy It Now
$0 Shipping
Condition: New
Location: Lakewood,NJ,USA
$
365
Buy It Now
Free Shipping
Condition: Used
Location: Farmington,MI,USA
$
288.78
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
107.44
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
189.26
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
179.15
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
248.65
Buy It Now
$0 Shipping
Condition: New
Location: USA
1 2 3
 In 

Past Items  
 
4 STANLEY 3/8 drive pneumatic air tools A30LATA A30LQATA 2200 rpm 900rpm 2000 rpm and other one i cant read numbers do to attachment that is on it your buying all 4 tools A-3053 and one A3353 heads A22 used working condtion buying as is since it is used ask any questions you need too before buying thanks John 815 848 2844 lots of tools to sell so keep watching
Cleco 55MAT-4-R8-4. Large Tool Measures 27" Long With Air Fitting. 7" Diameter. Looks To Be In Good Servicable Condition. 14 Day Satisfaction Guaranteed. Powered by The free listing tool. List your items fast and easy and manage your active items.
3/4" Square Drive Right Angle Head by Chicago Pneumatic This is a surplus part that appears to be used but is in excellent shape and spins freely. It could be used as a hand held extension for a 3/4" impact wrench or modified to fit on one permanantly. It is heavy duty and has ring style anvil with a through hole. It is 8 7/8" tall. 3 1/4" wide, and has an inner diameter of 2 11/16"
Atlas Copco Torque/Wrench impact Gun QTC200 3/4" Drive 140-208 Nm w/Metal L Bar. Lot of 2 THESE ITEMS ARE USED AND HAVE SOME COSMETIC WEAR. THERE IS A METAL L-SHAPED BAR ATTACHED FROM IT'S PREVIOUS WORKING ENVIRONMENT. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS MODEL# QT200 OVERALL DIMENSIONS: WIDTH: 19" LENGTH: 24.5" HEIGHT: 6" SHIPPING WEIGHT: 29 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE ... moreWEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE D
This is a used ingersoll rand 3/4" angle drive impact wrench. works great. very heavy duty.
Uryu Seisaku QTC 255 Torque/Wrench Impact Gun 3/4" Drive 742365 THIS ITEM IS USED AND HAS HEAVY COSMETIC WEAR BUT IS STILL IN WORKING CONDITION. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS MODEL# QTC 255 OVERALL DIMENSIONS: WIDTH: 13.5" LENGTH: 14" HEIGHT: 5" SHIPPING WEIGHT: 19 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL ... moreUPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY TH
Uryu Seisaku D432 Torque/Wrench Impact Gun 3/4" Drive D0208 THIS ITEM IS USED AND HAS HEAVY COSMETIC WEAR BUT IS STILL IN WORKING CONDITION. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS MODEL# D432 OVERALL DIMENSIONS: WIDTH: 10" LENGTH: 9.5" HEIGHT: 4.5" SHIPPING WEIGHT: 16 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL ... moreUPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANU
Uryu Seisaku UX T1620 Wrench/Torque Impact Gun 3/4" Drive THIS ITEM IS USED AND HAS SOME COSMETIC WEAR BUT IS STILL IN WORKING CONDITION. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS MODEL# UX T1620 OVERALL DIMENSIONS: WIDTH: 11" LENGTH: 12" HEIGHT: 4.5" SHIPPING WEIGHT: 13 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL ... moreUPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANU
Cooper Power Tools Cleco QTC 290 Pistol Grip Torque/Wrench impact Gun 3/4" Drive THIS ITEM IS USED AND HAS SOME SCRATCHES AND NICKS BUT OTHERWISE IS IN WORKING CONDITION. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS MODEL# QTC 290 OVERALL DIMENSIONS: WIDTH: 10.5" LENGTH: 12" HEIGHT: 5" SHIPPING WEIGHT: 15 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING ... moreCHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LIS
Ingersoll Rand 3/4" Drive Impact Wrench 2141P-5462) THIS SALE IS FOR A INGERSOLL RAND 3/4" DRIVE IMPACT WRENCH-2141P 3/8" NPT Inlet 1200 ft.lbs. Maximum Torque Through-hole socket retainer Built-in power regulator In-handle exhaust Twin Hammer mechanism Composite Housing Steel Hammer Case Also included is a impact socket retainer This is used and does have some engravings as shown in photo's This retails for over $600.00 new BUY HERE AND SAVE $$$ CHECK MY FEEDBACK AND BUY WITH CONFIDENCE! We accept PayPal ALASKA. HAWAII, AND PUERTO RICO, FREE SHIPPING DOES NOT APPLY. DO NOT PAY OFF OF 1ST EMAIL SENT TO YOU. THE SHIPPING WILL NOT BE CORRECT AND YOUR ITEM WILL NOT SHIP. CONTACT US BEFORE PAYMENT FOR SHIPPING QUOTE. Customer Satisfaction Policy" All Items are inspected& tested before listing on eBay. All Items are ... moredescribed to the best of our Ability* If you find items not as described* contact us immediately* We will Make Good* SAVE $$$ WITH OUR COMBINED SHIPPING OFFER SEE BELOW WE OFFER COMBINED SHIPPING ON MULTIPLE ORDERS FROM OUR AUCTIONS AND OUR STORE TO GIVE OUR CUSTOMERS THE BEST SERVICE FOR THEIR MONEY. CONTACT US BEFORE PAYMENT WITH ITEM NUMBERS AND ZIP CODE. SORRY NO INTERNATIONAL SALES*THIS INCLUDES CANADA* GOOD LUCK! IF YOU WOULD LIKE TO RETURN YOUR ITEM CONTACT US FIRST. AND YOU MUST RETURN WITHIN 14 DAYS OF RECIEVING. WE STRIVE TO MAKE OUR CUSTOMERS HAPPY AND WILL DO WHAT WE CAN TO DO SO. You may be interested in on eBay. Powered by
Sturtevant Richmont 10-50 in. lbs. 1/4" Drive Ratchet Head. 11" long. Some items may have engraving or they were removed by previous owner. Aerospace surplus tools. Please visit my WEB Store for more Aerospace Tools! Please visit my eBay Store for more Aerospace Tools! I will notify you through email with instructions on completing your auction. Please follow the eBay Check Out procedures. If you do not receive the email in 24 hours. Please let me know. If you win more then one auction, please wait for an invoice with combined shipping to save on shipping. Calculated Shipping sent by USPS Pacel Post(3-10 days) International bidders. AS OF NOW I AM UNABLE TO SELL TO RUSSIA DUE TO CUSTOMS AND DELIVERY TIME. Please see calculated shipping first before bidding to see the shipping cost. To calculate shipping cost see the link above. ... moreWe will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties“Import Taxes” could be due when the shipment enters your country. YOU are responsible for those duties/taxes. Know your own country's import restrictions and policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. Buying the item confirms that you have read. Understand and agree to be bound by our terms for an international sale, and that these requirements are incorporated into the eBay sales terms. I combine shipping on multiple auctions to save on shipping cost. Shipments are normally sent out when payment is received. I accept payment through Paypal. Contact me for other payment arrangements. Please send payment within 5 business days after close of Auction. Payment from International bidders is only accepted through Paypal. California residents have a 8.75 percent sales tax added to final
FOR SALE USED STANLEY A-30LA2-4 375 RPM PNEUMATIC NUTRUNNER AIR RATCHET 1/2" DRIVE A-4031 FREE US SHIPPING
I R INGERSOLL-RAND MODEL 251 3/4 IN DRIVE INPACT WRENCH GUN READY TO USE DESCRIPTION THIS IS AN I R INGERSOLL RAND MODEL 251 3/4 IN DRIVE INPACT WRENCH GUN READY TO USE MODEL 251IMPACT WRENCH SERIAL NO. 109 AIR PRESSURE 90 P.S.I. THE TOOL WORKS LIKE IT SHOULD, NO RUST READY TO USE, THESE TOOLS ARE VERY CLEAN AND HAS SEEN LITTLE TO NO USE, ARE THE TIPS ARE CLEAN, EACH HAS NORMAL MARKS FROM AGE AND HANDLING. THE PHOTOS ARE PART OF THE DESCRIPTION. PLEASE VIEW. Ple ase view photos for details and conditions as photos are part of the description and tells the story of the item. If you have any questions please ask. Happy Bidding! THANK YOU FOR LOOKING. IT IS GREATLY APPRECIATED! ALL SALES ARE FINAL. WE STATE NO RETURNS BECAUSE WE HAVE HAD PARTS CHANGED ON OUR ITEMS, VERY SAD! PAYMENT MUST BE MADE VIA PAYPAL OR C R E D I T C A R D S. LOCAL PICKUP ... moreIS WELCOME. SHIPPING COST AS LISTED IS TO THE LOWER 48 STATES ONLY. ALASKA AND HAWAII PAYS ACTUAL ADDITIONAL SHIPPING COST. I DO COMBINE SHIPPING; ALL YOU HAVE TO DO IS EMAIL ME. ALL NEW YORK STATE RESIDENTS PAYS SALES TAXES. NO MATTER WHAT THEY ARE WORTH. ALL SALES ARE FINAL NO RETURN! PLEASE READ BELOW IF YOU BID. PLEASE READ THE NEXT 2 LINES TWICE! THANK YOU* PLEASE. IF YOU HAVE ANY DOUBT WHAT SO EVER IN OUR DISCRIPTION, OR PICTURES. PLEASE DO NOT BID. WE THANK YOU FOR THAT. WE ALSO THANK YOU IF YOU BID OR JUST LOOK. AND WE SINCERELY MEAN THAT! People know us by now; we tell it like it is. To the best of our ability, good or bad AND THAT’S CARVED IN STONE. ONCE AGAIN THANKS FOR LOOKING AT OUR SITE. YOU NEVER KNOW WHAT YOU ARE GOING TO FIND! PUT US IN YOUR FAVORITE PLACES IF YOU CARE TO TAKE A PEEK ONCE IN A WHILE. Kwakstradingpost THANK YOU K W A K'S T R A D I N G P O S T B E L L M O R E. N Y 5 1 6 2 2 1 6 9 1 3
Made by Ingersoll-Rand This is a pneumatic impact wrench in good working condition. From the Manufacturer: Based on the industry's most popular ratchet. The 3/4 inch drive delivers an extra measure of durability with an advanced head design, plus a host of other features. Features: Reverse switch allows full power in both directions. Variable Speed Specifications: Drive: 3/4" square Required Air Pressure: 90 psi Overall Length: 9" Comes as shown in pictures.
PLEASE SEE MY OTHER AUCTIONS FOR A LARGE SELECTION MACHINIST ITEMS. I WILL COMBINE SHIPPING. Previous owner said that it works, but I did not test it. Sold as is. THE EBAY SHIPPING CALCULATOR MIGHT BE WRONG, PLEASE WAIT UNTIL I SEND THE INVOICE AT THE END OF THE SALE. I do not know much about these so I am selling it AS IS with no returns. The pictures show all that is included and the condition so please look close. Please see my other auctions for more tools items from a local estate. I will combine shipping. Contact me for a shipping quote. I tried to take photos of the parts that came with it. if there are any questions, please do not hesitate to email me with any questions.PLEASE SEE THE PHOTOS FOR THE BEST DESCRIPTION. Sold"AS IS" with NO REFUNDS OR RETURNS! NO EXCEPTIONS. I will combine shipping. Please email me for combined ... moreshipping rates. PLEASE KNOW THAT I TRY TO SATISFY ANY AND ALL OF MY CUSTOMERS. IF THERE IS A PROBLEM WITH YOUR PURCHASE, OR ANY OTHER QUESTIONS, PLEASE, DO NOT HESITATE TO EMAIL ME. I ANSWER ALL EMAILS AND WILL TRY TO WORK WITH YOU AS BEST I CAN. I WILL, HOWEVER, NOT BE BULLIED OR BLACKMAILED. THERE SEEMS TO BE SOME BUYERS THAT TRY TO SHAVE MONEY OFF OR CLAIM THINGS THAT ARE NOT TRUE. SO PLEASE, IF YOU ARE ONE OF THESE PEOPLE, DO NOT BID.LL On May-08-13 at 17:06:41 PDT. Seller added the following information: THE BASE IS INCLUDED IN THE AUCTION. PLEASE DISREGARD THAT THE BASE IS NOT INCLUDED*
URYU- PNEUMATIC DRIVE PISTOL. US-LT51PB-05, REVERSE, TORQUE CONTROL, 1/4" HEX. USED, I COMBINE SHIPPING.
Cooper Cleco 67ES285D6 Fixed Spindle Drive 3/4” USED Left Side: Right Side, Manufacturer: Cooper Cleco Model: 67ES285D6 Description: Spindle Condition: Used with surface scratches and sticker residue on the item. Item has not been tested. Packaging Condition Details: No Packaging Torque 42-210 ft.lbs. RPM 115 Drive 3/4” Length 20.5 Includes: One 67ES285D6 Spindle Drive Packaging Condition: No Packaging We accept the following payment methods. We ONLY accept Paypal and Credit Card Payments. No other payment method will be accepted. Credit Card Payments: We accept Visa. MasterCard, Discover and American Express. To make a direct payment via credit card, please contact us directly by phone. All Utah customers are subject to Utah State Sales Tax of 6.85% Please note that payment must be made within 7 days after the auction has ended. Combined ... moreShipping YES. We offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us. You can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk( in the listing title are not eligible for combined shipping(including freight items) All items being combined must be paid for within our 7 day payment policy(see under"Accepted Payment Methods" All items must be paid for on a single invoice. If items are paid for separately. They will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order. Each item without an asterisk( in the title will cost an additional $2 to ship. Heaviest item + $2 per each additional item(up to 9 additional items) Local Pickup We offer local pickup for our customers who want to save money and not pay for shipping. Pickups are at 431 N Wright Brothers Drive. Salt Lake City, Utah 84116. Please be aware t
The ratchet is listed as used but still in excellent condition. Shipping international will be additional cost.
ARO Right Angle Pneumatic Air Ratchet Wrench 1.600 RPM Model 7565-37 1/4" Drive Good Condition Check my other auctions for more quality tools and machinery. I combine shipping whenever possible. If you have purchased multiple items. Wait for a combined invoice before paying If you are waiting for more auctions to end. Just let me know. Good Luck Bidding!
AIMCO URYU Professional 3/4 inch Pneumatic PULSE WRENCH Drive Model UXR-T1820 Condition: Used but not abused. This unit has nicks and dings to the paint. The drive is in perfect working order. Smooth operation really nice unit. The nicest I have ever had the pleasure of using. Please review the pics and all cosmetic blemishes have been clearly shot. The extra side handle that screws in to add additional 2 hand stability is missing and not available. These are very expensive units and retail for $2495.00 New. I have no use for this unit and believe it belongs with someone who will use it. I am letting it go for much less than half the retail price and its well worth it. Please feel free to contact me with any questions. I want to earn your 5 star rating so if there is anything I can do before or after your purchase let me know. Domestic shipping ... moreis calculated to your location. Packed very well, insured with signature delivery. International shipping is available any additional costs are the buyers responsibility This can only SHIP to select locations. If the shipping charges are not reflected I cannot ship to you. Manufacturing Specs- UXR-T Series- Shutoff 3/4" Square Drive For Extremely Precise Torque Accuracy and Repeatability in Various Assembly Applications! Features Ideal for applications requiring no operator influence in the final fastening rundown for precise torque repeatability When preset torque is achieved. The hydraulic pressure is sufficient enough to bypass a spring-loaded piston and move the shutoff rod to rear, quickly opening the pilot valve and shutting off the tool No air timer involved with shutoff mechanism Productivity High speed rundown reduces fastening time One hand operation frees the other for productive use Ergonomic benefits for less fatigue and increased productivity Quick and easy forward and reverse operation with single-hand reverse lever Ergonomics Virtually no reaction impulse during and after fastener rundown Fast rundown reduces operator exposure Low vibration and sound l
99c AUCTION NO RESERVE IN PERFECT WORKING ORDER Matco Tools Pneumatic/Air Ratchet Wrench 1/4" Drive( MT1825B) Made In Japan Heavy Duty SEE PICTURES AND JUDGE YOURSELF FOR CONDITION. ACTUAL TOOL REFLECTED! Happy Bidding! No international shipping! Continental USA shipping only! For Winner: Upon receiving don't forget to leave a positive feedback! In my turn I'll do the same right away
1/4" Drive Mini Air Ratchet(AR7760A) Large motor develops more RPM and torque. One-hand operation. Swivel exhaust deflector. Rear exhaust.
Atlas Copco LUM21HR15U Pneu. Pistol Grip Nutrunner Reversible1/4" Hex Drive 1600 RPM This Nutrunner was a Distributor Demo. We are listing this nutrunner as Remanufactured because they were Distributor Demos with little to no use. They primarily just show wear from being handled. This Listing is for(1) Atlas Copco Nutrunner REMANUFACTURED. ShelfF52 08135500TT Shipping options: As you can see we offer a variety of shipping options for domestic shipping. Please be aware that items MUST be purchased and paid by 1pm eastern time in order to be shipped the same day for UPS. Otherwise your package will be picked up the following day. Call us at 866-293-8981 if you have concerns about when your shipment will ship. Credit Card payment processing: If you would like to pay using credit card over the phone. You can call our customer service toll ... morefree at 866-293-8981. They will be happy to help you complete the payment over the phone. Sales tax: MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt for is filed with our company. No exceptions. International shipments: For international shipments we ship primarily United States Postal Service. We will ship USPS. If the insured value does not exceed their maximum insurable value, in which case we may opt for an alternate company such as UPS or Fedex at our discretion. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. Freight Items: If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an international customer, your item requires freight, we require both the name and a contact nu
THIS THINGS WORTH A SMALL FORTUNE BUT IT'S NOT BEING USED AND IT WAS GIVEN TO ME AT MY OLD JOB. PUT IN THE BOTTOM OF MY TOOL BOX AFTER BEING USED FOR ABOUT A WEEK. NO LONGER WORK IN THIS FIELD SO IT'S UP FOR AUCTION. Drive Type 3/8" Square Free Speed 6700 RPM, Length 6.8 In, Min Torque 11.1 ft lb, Max Torque 23.7 ft lb, Min Torque 15 Nm, Max Torque 32 Nm, Sound Level 80 Style Pistol Grip Clutch Type Auto Shut Off Trigger Type Trigger Weight 2.2 lb, Manufacturer AIMCO URYU Max Free Speed 6700 rpm, NEW Price: $2.288.50.
Stanley and Rockwell nut runners your buying all 4 tools a couple are reversible. Part#s as I can read them are Stanley A30LRA-24F2 1500rpm. Rockwell cant read number Stanley A32LA1CT-10 rpm 965. Stanley A30LRQATA-5F2 300rpm. I tired all 4 of them and they all seems to work. I didn't check torque settings. FREE SHIPPING IN US ONLY possibly may have engraving and or tape on it from a working manufacturing facility. Used working condtion buying as is since used and in the global shipping program ask any questions you need too before buying thanks John text or call with your question 815 848 2844 lots of tools to sell so keep watching
USED BUT GOOD WORKING CONDITION! DA3-2-1)
Stanley A33LRA2ACT-4 pneumatic nut runner with 90 degree head. 3/8" drive. 400 RPM. Made in USA. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14326bd81ab-0xe2-
USED BUT GOOD WORKING CONDITION! DA2-1-1)
WORKS OK APPLIED AIR. REVERSIBLE, 3/8" NPT. USED BUT GOOD WORKING CONDITION! DA1-1-9)
REVERSIBLE. 1/4" NPT(DA1-1-9)
REVERSIBLE. 1/4" NPT(DK2-1-2)
THIS IS THE BLUE-POINT AT200D 1/4" DRIVE AIR RATCHET 1-20 FT LBS IN REALLY GREAT CONDITION! SHIPPING AND HANDLING $7.95 TO CONTINENTAL 48 STATES. NO INTERNATIONAL SHIPPING ON THIS ITEM. THIS RATCHET IS IN REALLY GREAT CONDITION.SHOWS VERY LITTLE USE. 20 FT LB MAX TORQUE LIGHTWEIGHT ALUMINUM HOUSING PRECISION PLANETARY GEAR SYSTEM YOU CAN OWN THIS GREAT AIR RATCHET NOW FOR A REALLY GREAT PRICE! CHECK OUR FEEDBACK AND BID WITH CONFIDENCE!
Used in good working condition UXR-T2000 Pulse Tool Pneumatic Pistol P/N UXR-T2000 Information from Specifications: Model: UXR-T2000 Air Consumption- ft3/min: 34 Air Hose Size- in: 1/2 Air Inlet Thread N.P.T. in: 3/8 Free Speed- rpm: 4.200 Noise Level- dB(A) 88 Overall Length(approx) in: 11.9 Overall Length(approx) mm: 303 Square Drive- in: 3/4 Torque Range- ft lbs: 150- 290 Torque Range- Nm: 200- 400 Weight less Socket- kg: 6.8 Weight less Socket- lb: 15.0 Features Ideal for applications requiring no operator influence in the final fastening rundown for precise torque repeatability When preset torque is achieved. The hydraulic pressure is sufficient enough to bypass a spring-loaded piston and move the shutoff rod to rear, quickly opening the pilot valve and shutting off the tool No air timer involved with shutoff mechanism Productivity High ... morespeed rundown reduces fastening time Shutoff mechanism instantly signals cycle completion to operator One hand operation frees the other for productive use Ergonomic benefits for less fatigue and increased productivity Quick and easy forward and reverse operation with single-hand reverse lever Ergonomics Virtually no reaction impulse during and after fastener rundown Fast rundown reduces operator exposure Low vibration and sound levels due to absence of metal-to-metal contact High power to weight ratio Anti-vibration jacket handle provides comfortable operator handling Exhaust silencer with combined one-piece air inlet bushing Quick and easy forward and reverse operation with single-hand reverse lever Reliability No mechanical clutch or hard part engagement for low maintenance and longer life Extended socket and extension life Automatic shutoff series is self-diagnostic No air line lubrication with oil-free rotor blades Quality Built-in torque adjuster and shutoff mechanism matches each application for required torque and fastening time Extremely accurate on properly designed joints Excellent clamp force repeatability Torque adjustment on outside of tool M
REVERSIBLE. 1/4" NPT 4PCS SOME OF THEM FIXED AS YOU SEE ON PICTURES(BF1-1-4)
MAC 300 pound Torque Wrench 3/4 Drive Its between 2 and 3 feet long Has its own wood carrying case Comes with some other attachments retails for over 5 or 6 hundred dollars Was used for Diesal Truck repair It is in very good working condition Shipping with box will be $44.00 in the USA Without box will be $35.00 in USA
Great working condition Air Ratchet Wrench 1/4 Sq Drive Super Stubby- Air Ratchet Wrenches Fast free shipping in USA
Click thumbs to Enlarge Any additional photos will be below This Matco Air Ratchet is used and in good condition. Matco is always a brand that you can trust. It is 1/4" Drive. Have a great day! Auction Includes: List of accessories Matco Air Ratchet Sku: R6-255002326-M-0115. Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days. Unpaid cases will automatically be open by eBay 7 days after purchase. Please note. If you enter the wrong billing address your card will be declined. Taxes: 5.0% Sales Tax to Wisconsin buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. We Ship to confirmed addresses only! Make any changes to your address before ... morepaying. All items will be shipped to your confirmed billing address after payment. We will not accept changes after payment! We Ship to the Continental US ONLY! Please contact us on APO/FPO Shipping. These will cost more. We no longer ship to Hawaii. Shipping Carriers: UPS& USPS 1-6 Day. Local Pickups: We offer local pickups. Please contact us for details. We offer a 14 Day Money Back Guarantee unless noted"As Is" We do our very best to accurately describe our items. However If you have any problems please contact us within 14 days of delivery. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow? We do not offer Buyitnows. Will you ship to this country or this country? We ship to the US only. What is the history of the item? Most of our items are used and we do not know the history. We test them and picture their current condition. What's Included? 99% of the time. If it's pictured it's included. Please also read"Auction Includes" Inkfrog terapeak. I000000. InkFrog Analytics. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-143bb021c0e-0xe8-
OEM ATLAS COPCO 4231-1932-80 Nutrunner Wrench Right Angle Head 3/4" Drive LOT PNEUMATIC ELECTRIC ATLAS COPCO NUTRUNNER WRENCH 2 PIECE HEAD ASSEMBLY LOT! EXCELLENT CONDITION! COMES WITH THE FOLLOWING: MODEL NO. 4231-1932-80 YOU GET 2 HEAD ASSEMBLIES IN THIS LOT AS SHOWN IN THE PICTURES. ONE HAS A ADAPTER BASE PART ATTACHED. EXHAUST DEFLECTORS ARE ALSO PART OF THE ASSEMBLY! THEY ARE 3/4" DRIVE! MEASURES 7.5 INCHES IN LENGTH! THE BASE DIAMETER IS 2.0" O.D. WE HAVE MANY MORE ATLAS COPCO PARTS IN STOCK. EMAIL US WITH YOUR REQUEST OR SEARCH OUR STORE TODAY! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! IF YOU FEEL SHIPPING IS TOO HIGH. JUST EMAIL US AND WE WILL TRY TO GET YOU A BETTER RATE. EBAY'S CALCULATOR DOES NOT ALWAYS ... moreSHOW THE BEST RATES! WE WILL GET YOU A PRICE THAT WILL MAKE YOU HAPPY! CHECK OUT OUR STORE FOR MORE GREAT DEALS! WE ARE POSTING NEW ITEMS EVERY WEEK! WE CARRY A LARGE INVENTORY OF ELECTRIC. PNEUMATIC, HYDRAULIC TOOLS& PARTS!
C P 1" drive 1-3/4 hex impact socket good working tool no personal markings Posted with
Par-X UR72 3/4 drive socket ratchet wrench with 20 handle bar used old big tools your buying the ratchet and handle has engravings and or dents dirt etc. from a working manufacturing facility. Handle is bent buying as is since used and in the global shipping program ask any questions you need too before buying thanks John text or call me 815 848 2844 lots of tools to sell so keep watching
meta http-equiv="Content-Language" content="en-us"
Up For Auction Is A Snap-On 1/4" Air Ratchet Model# FAR25A. Used. This Ratchet Has Been Oiled And Tested In Very Good Working Condition. Very Strong As It Should. Has scratches and wear to factory finish, Look At Photos Why Not Buy This& Save. Check Out My Feedback And Buy With Confidence. Item Sold is pictured& Will Ship After Payment Received. THANKS FOR BIDDING. PLEASE CONTACT US WITH ANY QUESTIONS YOU MIGHT HAVE ON THIS ITEM through the EBAY message system. Thanks THANK YOU FOR LOOKING AND HAPPY BIDDING! FEEDBACK: Feedback is very important to both buyers and sellers. If you are not satisfied with any part of a transaction. PLEASE allow us the first opportunity to remedy the situation. We will do everything possible in our part to resolve the situation. Feedback and the Five-Star Rating is what sellers depend on to survive ... moreon eBay. Low ratings hurt us in many ways. I ask you kindly that you first allow us to fix a problem should there be one, before you leave us a low rating or a negative feedback. THANK YOU SHIPPING: We can only ship to the address on your payment. TX sales tax is added during checkout. During checkout. Before you enter your PAYPAL information, EBAY will give you the chance to select the shipping address. Please make sure to choose correctly, as it cannot be changed, once its selected. Shipping United States: Items normally ship the next business day after payment is received. We ship FedEx ground. OR USPS Priority mail which are fast, depending on your distance from Texas. Insurance is included in the shipping price. So if something should happen, your purchase is secure. Items above $250 do require a signature at delivery. APO/ FPO is currently not being offered at this time
Both of the ratchet will work a little but both needs rebuilding. hipping international will be additional cost
up for auction is a URYU uxrT2000 3/4" Drive PulseTorque Wrench/nutsetter tool I hooked it to my small compressors and tighten a big 1' nut no problem.Iam not shure what the Troque is set at.I do know URYU tool are made increadable well.they use a oilfill pluse cell that is not like most pneumatic impact gun. HAS some scraches and a few dinks got lots of life left. email with any? more info from the UYRU WEBSITE Model: UXR-T2000 Air Consumption- ft3/min: 34 Air Hose Size- in: 1/2 Air Inlet Thread N.P.T. in: 3/8 Free Speed- rpm: 4.200 Noise Level- dB(A) 88 Overall Length(approx) in: 11.9 Overall Length(approx) mm: 303 Square Drive- in: 3/4 Torque Range- ft lbs: 150- 290 Torque Range- Nm: 200- 400 Weight less Socket- kg: 6.8 Weight less Socket- lb: 15.0 Features Ideal for applications requiring no operator influence in the final fastening ... morerundown for precise torque repeatability When preset torque is achieved. The hydraulic pressure is sufficient enough to bypass a spring-loaded piston and move the shutoff rod to rear, quickly opening the pilot valve and shutting off the tool No air timer involved with shutoff mechanism Productivity High speed rundown reduces fastening time Shutoff mechanism instantly signals cycle completion to operator One hand operation frees the other for productive use Ergonomic benefits for less fatigue and increased productivity Quick and easy forward and reverse operation with single-hand reverse lever Ergonomics Virtually no reaction impulse during and after fastener rundown Fast rundown reduces operator exposure Low vibration and sound levels due to absence of metal-to-metal contact High power to weight ratio Anti-vibration jacket handle provides comfortable operator handling Exhaust silencer with combined one-piece air inlet bushing Quick and easy forward and reverse operation with single-hand reverse lever Reliability No mechanical clutch or hard part engagement for low maintenance and longer life Extended socket and extension life Automatic shutoff series is
Made in the U.S.A. by ARO Co. This is a 3/4" Super Duty impact wrench in good condition SPECIFICATIONS: Drive: 3/4" Over all length: 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1453d6679c0-0x111-
I am selling my MAC Tools AR250 1/4" drive sealed head air ratchet. Item is used but does not engage when connected to air but works as a manual ratchet. Item is not working and I am selling for parts. Retail was over 250$ new for this item. I am selling all of my items as I am moving for a job and can not take all of my items with me. If you are local In the greater Chicago metro area you can pick up the item up from me. Other wise item will be shipped usps first class mail. If you have any questions do not hesitate to ask. Please check out all of our other great items for sale. Thank you for looking. Posted with
URYU 1-3/4” drive Jumbo Impact Wrench heavy duty double hammer 3” bolt cap. This is a pre-owned URYU heavy-duty double-hammer impact wrench offers the ultimate power for handling large. Tough nut running and removal jobs in shipyards, steel mills, chemical plants, powerhouses as well as in plant manufacturing heavy machinery, large diesel engines, and turbo generators. Double-Hammer Mechanism allows powerful and fast assembly for highest productivity with well-balanced hammer mechanism and less torque reaction to operator. Recommendable for general high-volume assembly such as motor vehicles. Appliances, and machinery. Built-In Air Regulator. Pull up the spring loaded knob and turn clockwise to lower the power and anticlockwise to increase it, then reset. Factory Specifications: Made by: URYU SEISAKU. LTD. in Osaka Japan Model number: UW-75S ... moreManf. Code Number: X32353 Square Drive: 1-3/4” Bolt Size Capacity: 3” or 76mm Torque Range- ft-lbs: 5.750 to 12,540 Air Consumption- ft3/min: 114 Air Inlet Thread N.P.T. 1” Recommended Air Pressure: 85 psi Average Air Consumption: ft3/min Air Hose Size: 3/4” i.d. Noise Level: 112 Vibration Level: 45.0 Free Speed R.P.M. 1400 Overall Length: 26-1/4” Weight: 125 lbs Price New: $11.967.75 Parts list will be included. This tool and parts are sold in the USA by Aimco at 800-852-1368 Shipping: This impact wrench will have to ship motor freight on a pallet. You can get freight charges from freightquote.com. Pallet size will 30” square and total shipping weight will be about 140 lbs. We do have a forklift are located in a Business Park. Shipping zip code is 77521 THIS ITEM IS SOLD AS IS.
SNAP ON AIR RATCHET M/N FAR25A Item was removed from a working environment. But we have not tested the item so as all of our auctions it is being sold as is and all sales are final. Disclaimer- ALL ITEMS NEW OR USED ARE SOLD AS IS AND ALL SALES ARE FINAL. QUESTIONS? PLEASE CALL 210-566-3300 or text us at 210-273-3394 Check out my other items! Be sure to add me to your favorites list!
The ratchet is used and shows some wear but still in good working condition. Shipping international will be additional cost.
The item you are purchasing is a Ingersoll Rand 2161P 3/4" Drive Heavy Industrial Impact Wrench. This item ships as pictured. Free shipping to the lower 48 states only. 10
Chicago Pneumatic 1/4" Drive Air Ratchet Wrench Tested and works properly. Condition as pictured. Launched from my store- Powered by
good USED Snap On Far25 1/4" air ratchet. Used in excellent condition. Snap-On model FAR25 1/4" drive air ratchet. There are NO owners markings at all as evidenced by the pictures of all 4 sides. Would make a great addition to someones toolbox. Ratchet oiled daily if used. Fully tested and functions correctly. No Reserve. Bid now or utilize the BUY IT NOW. please see our other tool auctions. NO INTERNATIONAL BUYERS/BIDDERS! Even if you have a US based Agent. We CANNOT nor will we accept international payments. Bids will be removed. If winner, you will get a NPB filed by ebay against you. As we cannot accept the payment. So save the hassle and NPB strike, DO NOT BID General– By placing a bid this means you AGREE to our auction terms and fully intend to complete the transaction if you are the winning bidder. We reserve the right to ... morecancel bids or end the auction early at any time. If we so choose. Failure to read this notice DOES NOT dismiss your responsibility. We are a business located in Dallas. TX. It is ultimately the responsibility of the bidder to ask any questions or express concerns BEFORE placing your bid. All items are pre-owned and show normal wear from prior use. Unless otherwise indicated. If items are NEW, this will be clearly indicated in the auction DESCRIPTION. All Emails will be answered as quickly as possible. Allow us 24hrs. to return a email. Although we try to do most times within hours Shipping– We ship items utilizing USPS. UPS, and FEDEX. We will ship the best way for the particular product being sold in auction. We ship Monday thru Thursday. Items with payment received on Friday through Sunday will not ship until the following Monday. Sometimes if items are paid for early on a Friday. We may be able to still ship out that item. But if you take 3 days to pay, and do a last minute payment on a Friday, do not expect us to rush to ship a product you took your time paying. All Texas residents are required to pay sales tax whether they have items shipped. Or opt for local pick up. The
Ingersoll Rand 3RLM2S5 1/4" Professional Drive Air Angle Wrench MADE IN USA
856-881-3185 SKU: AGH196 Cleco 3/4" Drive Piston Grip Impact Gun Pulse 250PTHFC226. Brand: Cleco Condition: Used Model: 250PTHFC226 Lot# AGH 196 10.4.B We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 7:30 AM- 4:30 PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. ... moreThis is something we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECEIVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:00 pm EST, to speak with a Customer Service representative who can help you with any questions rega
Ratchet. Air, Mini, Cushion Grip, 1/4" drive Product Specifications Information: Vibration Level. M/s² 6.2 Vinyl Boot YA905(included) Sound Pressure Level. DBa 84 Weight. Lbs. kg) 1.4(6) Drive Size. Inches(mm) 1/4(6) Air Consumption. Free Speed, CFM(SCFM) L/MIN] 1.4(10) 40] Torque Range. Ft. lbs. N•m) 0-35(6-47) Length. Inches(mm) 7.8(197) Free Speed. RPM 235 Air Inlet Thread Size 1/4"18 NPT Recommended Hose Size. Inches(mm) 3/8" 10 mm) Country Of Origin USA Brand Snap-on Fast Free Shipping is offer to USA customers. I have a lot more Snap On Tools for sale and Vintage tools also. Please take a look at the other items I have for sale.Items are shipped out the following business day. Once it is paid. Thank you for your interest and have a good day.
ARO INGERSOLL RAND SG21B-26 2600RPM 1/4" REVERSE DIRECT DRIVE SCREWDRIVER 2 Make: ARO Products/ Ingersoll Rand Model# SG021B-16 Drive: 1/4" Speed: 22000 RPM Torque Range: 0.2 ft lb/ 0.3 Nm Description: Reverse Direct Inline Pistol Grip Screwdriver Includes all/only items pictured. Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. After winning an item in auction or completing a Buy It Now purchase. You have two check-out options: Check-Out Now! Click the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you do not choose to Check-Out now. You will be notified by eBay via e-mail that ... moreyou are the winning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you will be able to quickly and conveniently pay for your purchase. You may also continue purchasing additional items from our auctions or eBay store. You have[5] days from the end of the first purchase to add additional items to your order. Make sure all of your auctions have ended prior to checking out. All of your purchases will be consolidated into one checkout! Payment We accept the following forms of payment. PayPal. Sales Tax For shipments to Arizona addresses. We are required by State law to collect 7.8% Sales Tax. Shipping All items under 100 lbs will be shipped either USPS or Fedex. Any items over 100 lbs will be shipped freight through a freight carrier of our choice. Customer Service If you have any questions before or after your purchase please use the ask a question button.
Snap On Pneumatic Air Wrench 1/4" Drive 90 PSIG/ 6.2 BAR MAX 260 RPM Snap On Pneumatic Air Wrench 1/4" Drive 90 PSIG MAX 6.2 BAR MAX 260 RPM Unit is in Good Working Condition Unit is used and may show signs of previous use such as scratches. Scuffs, and dirt, etc(please see pictures) ​The Plastic Handle Grip is Torn AS-IS*SHIPS AS SHOWN* SHIPS TO LOWER 48* PAYPAL ACCEPTED. PLEASE ASK FOR OTHER PAYMENT OPTIONS IF NEEDED. KANSAS RESIDENTS TO PAY 8.65% SALES TAX SHIPPING WILL BE BY USPS OR UPS UNDER 150LBS. OVER 150LBS WILL NEED TO BE SHIPPED FREIGHT. ALL FREIGHT WILL BE ARRANGED BY THE BUYER. ALL DAMAGES FROM FREIGHT WILL BE THE RESPONSIBILTY OF THE BUYER AND FREIGHT COMPANY. PLEASE INQUIRE FOR ALASKA HAWAII OR OVERSEAS SHIPPING RATES AND ADDITIONAL FEES. PLEASE CONTACT US FOR ANY QUESTIONS YOU MAY HAVE. We evaluate used items based ... moreon their external condition. Power up test, self-testing(if applicable) and basic functionality. Any observed problems are noted in the listing. We do not test new-in-box items. We cannot test or guarantee full adherence to published specifications. We allow a 7-day right-of-inspection. The sale price less 15% restocking fee will be refunded for items shipped back in the original condition within this time frame. The return shipping must be by traceable and insured means. The buyer will be responsible for all shipping costs. If we have inadvertently misrepresented an item or have overlooked a functional defect. We will always work to ensure buyer's satisfaction. All claims must be made within 7 days upon receiving the shipment. ALL ITEMS SOLD AS IS WHERE IS. NO WARRANTY IS GIVEN OR IMPLIED. WE TEST OUR ITEMS FOR BASIC FUNCTIONALITY AND OR POWER UP TEST. PLEASE ASK ANY AND ALL QUESTIONS ABOUT ITEM BEFORE BIDDING OR BUYING. ITEM IS AS PICTURED AND AS DESCRIBED. PLEASE CONTACT US BY EMAIL AND WE WILL RESPOND WITHIN 24HRS.
Snap On Tools Air Ratchet. Air, Mini, Cushion Grip, 1/4" drive used in great shape any? just ask!
This auction is for ONE USED IN GOOD WORKING CONDITION MATCO TOOLS MT1835 1/4" DRIVE AIR RATCHET WITH HOSE.PLEASE SUPER SIZE THE PICTURES FOR A CLOSER VIEW.YOU WILL RECEIVE WHAT YOU SEE IN THE PICTURES.
This was purchased from a large international oil company with an extensive QA/QC program for instrumentation and tools. This Raptor RP-1000 is in good condition and has the following specs: 3/4" drive 250-1000 ft-lb wt 10 lb. 25 RPM See my site www.texasglobalequipment.com for more items not listed here. Thanks for looking.
This is a Mac Tools 1/4" air ratchet 90psi. Is used but still in good shape. Nice
Powering 100% of your Store's inventory to eBay. LIBERTY PAWN AND GOLD. Description: AIR RATCHET: MATCO TOOLS MODEL MT1824. 1/4" DRIVE Specific details: Item Appearance, Like new appearance. Functionality? Fully tested& Completely functional. Payment PayPal is the ONLY online payment method we accept at this time. Your PayPal account must be a Verified U.S. PayPal Account. We also recommend that you use a Confirmed Ship To Address. Shipping Your item will be shipped within 1 business day(s) After shipping your items will be delivered within 1-10 business days. Terms of Sale Tax applies in: VA About Us Liberty Pawn is owned and operated by Dave and Tammy Munsee. Dave was born in Richmond and Tammy was born in Fredericksburg. VA. They have been married for 30 years. They have a son who attended Riverbend High School and now attends ... moreWest Virginia University. The Munsees are members of the the Fredericksburg Area Running Club, Fredericksburg Rod and Gun Club and are active volunteers and participants in the community. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-148a9f1c857-0x115-
Used in good condition. MAC Tools model PB850 1/4" drive air impact gun. Tool has been tested and is fully functioning. Body does have scratches and dings from use. NO name has been engraved on this tool. We do NOT have a"Buy It Now Price" Nor do we end auctions early. Please do not ask us too, thanks. Double Eagle Pawn Inc. 104 S. Summit St. Arkansas City. KS 67005 620-442-4868 Tue-Sat 10am to 5pm CST
GARDNER DENVER 16B2& ROTOR Pneumatic Nutrunner 3/8" 1/4" Drive Wrench 2pc Lot ROTOR& GD GARDNER DENVER PNEUMATIC WRENCH NUTRUNNER TOOL LOT! 90 DEGREE ANGLE HEADS! GOOD USED TESTED WORKING CONDITION! GARDNER DENVER MODEL 16B2-20C. 1/4" DR, 2000 RPM NUTRUNNER. MEASURES AROUND 10" IN LENGTH! ROTOR TOOL MODEL 1SLBRA-40. 3/8" DR, 350 RPM. MEASURES AROUND 13" IN LENGTH! ROTOR NUTRUNNER IS MISSING THE LEVER. IF I CAN FIND ONE IN STOCK WE WILL INCLUDE IT. ROTOR TOOL GOES IN REVERSE. THE GARDNER DENVER IS NOT A REVERSIBLE TOOL. THESE ARE GREAT BUILT TO LAST NUTRUNNER WRENCHES! SEARCH OUR STORE FOR MORE GREAT TOOLS! EMAIL US WITH YOUR QUESTIONS! THANKS FOR SHOPPING WITH US! WE OFFER COMBINED SHIPPING SERVICES. BUY TWO OR MORE ITEMS AND GET A DISCOUNT ON SHIPPING! IF YOU FEEL SHIPPING IS TOO HIGH. JUST EMAIL US ... moreAND WE WILL TRY TO GET YOU A BETTER RATE. EBAY'S CALCULATOR DOES NOT ALWAYS SHOW THE BEST RATES! WE WILL GET YOU A PRICE THAT WILL MAKE YOU HAPPY! CHECK OUT OUR STORE FOR MORE GREAT DEALS! WE ARE POSTING NEW ITEMS EVERY WEEK! WE CARRY A LARGE INVENTORY OF ELECTRIC. PNEUMATIC, HYDRAULIC TOOLS& PARTS! 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-149332c209d-0x114-
Up for Auction today we have USED Cleco 3/4" Drive Piston Grip Impact Gun Pulse 250PTHFC226 This Item is listed to the best of my ability. Please see Pictures. Your Bidding on USED Cleco 250pthfc226. Item Does shown signs of Wear. And has engraving and writing in paint on it. Please See Pictures. Shipping- We ship during the business week excluding holidays. Handling time- 1 business day upon receipt of payment and CONFIRMED address through PayPal. International shipping- Global Shipping Program Only-Selling Policy- I guarantee all my items to be listed accurately and honest. If you feel that I haven’t met your expectations. Please contact me immediately to attempt to resolve any issues. Refund or Exchange at seller’s discretion. Contact Me- Email or by telephone at(540)980-4687. Business hours Eastern Standard Time(est) Monday-Friday ... more10am-5pm Saturday 10am-3pm
J Gun-A1-Z Pneumatic Torque Tool 3/4" Square Drive with Case and Calibration Certificate. I don't know very much about this item. Since it was picked up at an estate sale. Listing all the info from the stickers and calibration cert. Says it was calibrated 5/1/14. I listed it as used, since I can't be certain of it's condition. Although it might be new, since it looks clean/mint. Please send any questions about condition or refer to pics. I will assist with more answers and pics if I can. If you have any questions. Please ask. I can combine shipping with most of my other auctions, please request a total before paying. Shipping costs include a small fee(under $1) for packaging materials(calculated based on First Class/Parcel Post shipments. Most people's choice) and for items over $15, insurance is also included. If actual ... moreshipping costs vary considerably, I do refund the difference. Please do not mark me down on shipping costs, I do not make money on this(and I actually get charged fees on these costs) IMPORTANT TERMS OF AUCTION- READ BEFORE BIDDING: Payment by Paypal required. I will only ship to the address listed on your Paypal payment; do not request that I ship to another address. Before OR after the auction ends. Payment is expected within 7 days from auction end. I do not send invoices, except in the case of combined shipping- you can pay from the auction page once item ends. Item is described accurately. And pictured accurately, and thus, no refunds. Please only bid if you intend to follow through with payment; time wasters not welcome- I WILL report non-paying bidders to Ebay. I leave feedback when the transaction has been completed and you have acknowledged that you have received your item and are satisfied(either through leaving feedback or sending an email) If you have any questions, please email me. No refunds will be given just because you didn't take the time to read the description and only bid based on the title or photo. Powered by The free listing tool. List your items f
Up for sale. As pictured, my Mac 1/4 inch drive air ratchet model AR2760c. Item is used but in working condition. If you have any specific questions please feel free to ask.
UP FOR AUCTION ~ MAC TOOLS ~ AR250-HL 1/4" DRIVE PN E UMATIC AIR RATHET THIS IS A 1/4" DRIVE HI-LOK AIR RATCHET USED IN THE AEROSPACE INDUSTRY AND OTHER INDUSTRIES IT HAS A HOLE THROUGH THE CENTER OF THE DRIVE FOR SPECIAL HI-LOCK BOLTS ALSO CALLED HIGH-LOK. HY-LOK, AND HI-LOK IT IS IN VERY GOOD WORKING CONDITION SERIAL OR MODEL NUMBER Z111557 It does NOT have personal engravings This is Made in USA and Works Great! Please see the photos for condition Please pay through Paypal within 3 days of the end of the auction and we will make every effort to ship out the following business day. Shipping is to the USA only. We may be able to combine shipping on multiple orders. Please feel free to ask any questions. No refund on postage if returned.
One lightly used Milwaukee Pneumatic Tool Model MP-760 1/4 in sq drive air ratchet. Excellent working condition. With oiler and hose.
This is a precision industrial pneumatic pistol made by Atlas Copco. The part number is EP18PTS450-HR20-RE. We have SEVEN available; please let us know if you need more. 3/4" Square Drive. Torque range is 225-410 Nm(165-302 ft.lbs. Weight is 9 pounds. We cannot test for torque output; selling as-is. Please feel free to call Tim if you have questions 214-707-8665. Perfect choice for quick. Inexpensive tooling for your short-term projects. We have more available. Please let us know if you need a different quantity. We have other Makita Cordless items currently up for auction. All brand new. Please bid with confidence with us; our positive feedback will speak volumes. Thank you for shopping and good luck bidding! Bidding: Please. If you’re new to eBay and don’t have your Paypal set up yet, or don’t intend to pay right away, please don’t ... morebid on this item. Payments: We accept Paypal(preferred) No personal checks. Please. Paypal payments must be received within 3 days of auction's close. Shipping: Let’s talk about shipping. We ship via FedEx Ground so we have a REAL tracking number that shows the ACTUAL progress of your package. We will link your email address to this tracking number when we ship. So you can watch also. Shipping quoted based on the Lower 48 States. Hawaii and Alaska buyers should check for shipping quote prior to bidding. We ship to CONFIRMED ADDRESSES ONLY. On occasion, we will ship via FedEx 2-day shipping at our option. We will use USPS only when we have to. As their tracking system is a joke. Shipping for this item will be flat rate. Which includes insurance and a tracking number. We can combine shipping if you like, but you’ll have to tell us what other items you’re bidding on, watching, or won so we can quote combined shipping costs. Shipping typically takes place the day after payment is received or cleared. We will ship via insured FedEx ground in most cases and can provide the tracking numbers. FedEx ground will take 1-3 days to reach most points in the lower 48 states. International
UP FOR AUCTION IS A JET JSG-0719 1/4"Drive- 250 RPM- 90 PSI AIR RATCHET. IT IS IN GOOD SHAPE AND IN GOOD WORKING CONDITION. IT APPEARS TO HAVE NEVER BEEN USED. IT COMES AS PICTURED ABOVE. IF YOU HAVE QUESTIONS PLEASE EMAIL. THERE IS NO RESERVE THE HIGH BIDDER WINS. THANKS FOR LOOKING AND GOOD LUCK WITH YOUR BIDDING. WE ONLY SHIP TO THE LOWER 48 US STATES!
We have for sale a Mac Tools AR2760C 3/8" Drive Air Driven Pneumatic Ratchet Wrench. Made In Japan. This is a used item, in good shape. Only showing light wear from having been previously owned. Works well. Dear eBay customer- We strive for 5 Stars for every transaction and will do everything in our power to earn that from you. However. From time to time situations occur beyond our control, like USPS, FedEx, or UPS losing your shipment in the mail. This is out of our control but eBay is holding the sellers responsible. Please give us the first opportunity to solve ANY AND ALL issues before contacting EBay to initiate a case/claim! We respond to questions quickly. Feel free to contact us anytime. Thank You& Happy Buying! Check out my! Be sure to add me to your! Payment We accept PayPal. For all other payment methods please call: 1-810-391-2359 ... moreShipping Items 13 oz or less are shipped first class. USPS. All other items will be shipped via USPS o r FedEx. We reserve the right to refuse shipping to certain countries(ones we have had problems with) We ship within 24 business hours of purchase. Terms of Sale We accept returns on all of our items within 30 days of receipt of the item. Please contact us in the event you need to return a purchase. We reserve the right to charge a 25% re-stocking fee on returns due to no fault of our own. Any NEW items returned opened will be charged a%50 re-stocking fee. Please check the ad. Pics, part numbers, items included and contact us anytime, we are always happy to help. About Us We are a company dedicated to providing fine products at an affordable price. We pride ourselves on our customer service. And satisfaction, and we want to ensure that you receive the best we can offer. We take great care to make your experience with us a pleasant one. If you have any questions please feel free to call us. Contact Us You can call our store at(810) 391-2359. Our shop hours are: Mon- Fri 9am- 7pm Saturday 9am- 6pm Check out our!Be sure to add us to your! AK. Supreme. Supremew
Central Pneumatic 1/4" Drive Air Ratchet I found this in my Father's collection of old tools. I am in the process of selling of some of his tool collection. I am not familiar with this tool and it is untested. So I cannot confirm if it works. I am selling as is with no returns. Please look at photos for details and condition. Free Shipping.
Product Description: Torcgun JGUN A-5 Single Speed 3/4" Drive Pneumatic Torque Wrench w/ Large Reaction Arm& Pelican Protective Case. Desired output of FT LBS of torque is determined by adjusting the PSI on your FRL(Filter. Regulator, Lubricator*Not included) See conversion chart below. Torcgun is manufactured by the Torque Gun Company. A subsidiary of Hytorc. Condition: Overall Excellent. Tool has some very light surface imperfections. Scratches etc.Unit has been tested and works perfectly. Anvil is in excellent condition. Pelican case is new. Reaction arm has some wear. See pictures for details. Specifications: Model: JGUN-A.5 Drive Size/ Type: 3/4" Square Speed: Single Torque Range: 175- 500 FT LB. Maximum PSI: 90 RPM@ 90 PSI: 24 Approx. Length: 9" Approx. Length w/ reaction arm: 11.00" Weight w/ reaction arm: 9.3 ... moreLB Bolt Load Accuracy: +/ 5% MADE IN USA Other Items Included: Pelican 1400 Case Printed Operations Manual DESCRIPTION- JGUN FROM TORCGUN: The most simple and straightforward of the Torque Gun pneumatic product line. The Single Speed torque guns are designed to give an even and accurate final torquing every time. The splined reaction area allows for the use of custom reaction fixtures giving the user the flexibility to adapt the tool for any application. BOLT LOAD ACCURACY WITHIN ±5% The Torcgun is a precision air torque/tension compatible machine that unlike impact guns… you can set and get your desired load. Impact wrenches function by shocking the nut with fast blows by a hammer-like device. This leads to inaccuracies. Heavy vibration and loud operating volume. The Torcgun uses precision gearing to produce constant, calibrated power assuring that you will achieve bolt load within your window of accuracy every time. Notes: Tool MUST be used with FRL unit for proper lubrication and clean air supply. Never Exceed Maximum PSI! User must read and understand operation manual before using this tool. User responsible for proper maintenance. Testing and calibration as needed. T
TEKTON 14 pc 1/2" Drive Deep Impact Socket Set 3/8" 1 1/4" with Case
3/4" Square Drive Impact Wrench Ingersoll Rand Model 2908 Any problems with your order/ please contact us. We reserve the right to relist any item unpaid after 4 days. We will attempt to contact you before the item is relisted. We generally ship Tuesday and Friday except for holidays. PAYMENT: Major credit cards accepted via paypal or by calling store. Store hours Mon-Wed 9:30AM to 4PM. Thurs and Fri 9:30AM to 5:00 PM. Sat 10AM to 2PM(412)221-7333. PLEASE NOTE: Item may also be for sale in store and occasionally sell over the weekend. In this case we will refund any payments made for said item and leave buyer positive feedback. Local pickup is always welcome and shipping fee negated
CHICAGO PNEUMATIC 1/4 DRIVE REVERSIBLE AIR RATCHET CONDITION: Used/ See Photos/ Normal Wear and Tear Good Working Condition: NO NOTICEABLE AIR LEAKS Owner Markings: YES*ALL CUTTING TOOLS ARE NOT COATED UNLESS OTHERWISE SPECIFIED* Click Here to Check out my EBay Store Please review the shipping charges to make sure you are comfortable with that charge. If you feel the charge is excessive. Then please e-mail before you purchase. All shipping labels will have the actual cost displayed. If flat rate priority shipping is cheaper than parcel post then that shipping method will be used and most times it is. Should there be a shipping difference of more than $.50 that money will be immediately refund. Please e-mail with questions ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14bd6eaaded-0x103-
3/4" Drive Atlas Copco LTS 57 HR20 Shut-Off Type Impact(May Need Repaired)