In 
 
Order by: 
Available to: 
Price: 
 - 
$
29.99
Buy It Now
Free Shipping
Condition: New
Location: Duluth, United States
Flute Length - 1.25" (Length of Cut). Our products are manufactured in an ISO-9001 certified facility. Other Lathe Chuck CNC Soft Jaws Lathe Chuck T-Slot ... moreNuts Lathe Chuck CNC Hard Jaws Vise Jaws End Mills Clamping Studs Chuck Boring Rings CNC Bar Pullers.
$
28.72
Buy It Now
Free Shipping
Condition: New
Location: China
Specifications: Type: Push Pull ActionModel: BRH-304-EMHandle Opens Angle: 180°Holding Capacity: 390kg/858lbsFinish: Zinc PlatedMaterial: Carbon Steel, ... morePlasticHandle Color: RedMounting Hole Diameter: 8.7mmMounting Hole Distance: 42 x 42mm(L*W)Screw Thread Size: M10 x 30mmClamp Size: 160 x 58 x 90mm(L*W*H) Package Content: 1pcs x Toggle Clamp Description: Unique push/pull action Quick-Release Toggle Clamp, allows you to hold workpiece in a vertical position.Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance.
$
25.57
Buy It Now
Free Shipping
Condition: New
Location: China
Specifications: Type: Push Pull ActionModel: GH-304-CMHolding Capacity: 230kg / 506lbsFinish: Zinc PlatedMaterial: Cast Iron, PlasticHandle Color: RedMounting ... moreHole Diameter: 6.5mmMounting Hole Distance: 41 x 35mm(L*W)Screw Size: M8 x 28mmClamp Size: 125 x 57 x 65mm(L*W*H) Package Content: 1pcs x Toggle Clamp Description: Unique push/pull action Quick-Release Toggle Clamp, allows you to hold workpiece in a vertical position.Material: Cold-rolled Cast Iron with Zinc plated coating for corrosion resistance.
$
16.02
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specification: Brand new Material: stainless steel, aluminum Color: purple Grit: 46 Grit Diameter: approx.100mm/4" Bore size: approx.16mm,5/8" Max. rpm: ... more15300/min Feature: Wear resistance, uniform grinding effect. Less dust and low noise. Durable for use. Very fast removal of paint or rust without damaging the original surface. Clog resistant, strips fast and can be used for all coating and surfaces. For use with most makes of 100mm angle grinders. .
$
35.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
1-1/16" x 1-3/8" depth of cut carbide-tipped annular cutter Diameter of cut: 1 1/16'' Cutting Depth: 1-3/8'' 3/4" Weldon Shank Cuts holes in steel accurately, ... morequickly & safely Large holes can be drilled up to ten times faster than regular drills bits Make overlapping holes, slotting holes and edge cuts Machine-finish hole-no reaming needed when used with Lubricant Each specific size laser etched on shank .
$
6.97
Buy It Now
Free Shipping
Condition: New
Location: China
Holding Capacity: 27Kg/ 59Lbs. 2pcs Pull Button Lever Latch Toggle Clamp 220 lbs Capacity 4002 68 x 32 x 17mm. 36202 20mm Plunger Stroke Push Pull Toggle ... moreClamp 91Kg 200 Lbs Hand Tool. Antislip Plastic Covered Handle Hand Operated Horizontal Toggle Clamp 4pcs.
$
25.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
DH612 Surface Grinder. This is a reproduction of an original DoAll DH612 Surface Grinder Instruction and Parts Manual. Dh612 Surface Grinder Illustrated.. ... more4. Instruction and Parts Manual.
$
17.99
Buy It Now
Free Shipping
Condition: New
Location: Sioux Falls, United States
If you want to improve your joinery skills but find it difficult to align the depth of dovetail cuts, use the DCT | Wheel Marking Gauge Woodworking Scribe. ... moreSimply apply a threadlocker coating (not included) on the screw and tighten to your preference.
$
55.99
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Product features Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically ... moreand horizontally Square and parallel within .0002" (tolerance on handbook is metric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand labwork MPN LAW59694 UPC Does not apply.
$
199.02
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Table Saw Tenoning Jig Vise Clamp Woodworking Tool Tenon Dowel. ★This Is a High-quality Woodworking Tenoning Fixture, Which Is Very Simple and Convenient ... moreto Install. 1x Woodworking Tenoning Fixture. ★Quick Clamping Device, Use Chuck to Quickly Clamp Wood for Work.
$
23.95
Buy It Now
Free Shipping
Condition: New
Location: Rochester, United States
Functions: Allows planing of thin boards, prevents the workpiece from skewing under your plane. 1 pc x Planing Stop Board. Universal: The stop can slide ... moreon the board, fits all kinds table surface. Due to the light and screen difference, the item's color may be slightly different from the pictures.
$
60.90
Buy It Now
Free Shipping
Condition: New
Location: Sheridan, United States
Quality Caste Iron Body 50 mm 4 jaw Independent Dog Chucks with Hardened Tool Steel Jaws.
$
5.71
Buy It Now
Free Shipping
Condition: New
Location: China
$
17.99
Buy It Now
Free Shipping
Condition: New
Location: China
Specifications: Type: Push Pull ActionModel: DEMA-36070Holding Capacity: 50kg / 110lbsHandle Open Angle: 66 DegreeFinish: Zinc PlatedMaterial: Carbon ... moreSteel, PlasticHandle Color: RedMounting Hole Diameter: 5mmMounting Hole Center Distance: 25 x 27mm(L*W)Clamp Size: 142 x 40 x 25mm(L*W*H) Package Content: 2pcs x Toggle Clamp Description: Unique push/pull action Quick-Release Toggle Clamp, allows you to hold workpiece in a vertical position.Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance.
$
63.14
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Four jaw independent turning chuck This chuck can hold round and square workpiece The chuck could fits wide range of lathes will fit lathes with 3/4" ... moreX 16TPI threads 150mm CHUCK reversible jaws thread size 3/4" x 16tpi 【PREMIUM QUALITY】- Chuck body made of quality cast iron. All guideways and bearing surfaces are precisely machined for better performance. Flimsy parts are specifically engineered by quenching process to enhance durability. .
$
208.99
Buy It Now
Free Shipping
Condition: New
Location: China
1 x Milling Machine. Y-axis travel: 67mm. One-way stroke of handwheel: 1.5mm.
$
21.38
Buy It Now
Free Shipping
Condition: New
Location: Sheridan, United States
MT1 Shank, OAL 67.50 mm.
$
29.75
Buy It Now
Free Shipping
Condition: New
Location: China
TASP Steel Wood Lathe Chuck Face Plate. 4"(100mm) & 5"(150mm): 1 piece Wood Face Plate with a Adapter. 1 piece M33 x 3.5 Wood Face Plate. 2"(50mm) & 3"(75mm): ... more1 piece M18 x 2.5 Wood Face Plate. Material: All steel.
$
20.41
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description: 4" Inch long Shank diameter 1" T.I.R 0.0003" Precision Ground on the shank Black Oxide Nut Strong Clamping Brand ALL-CARB MPN Does Not Apply ... moreWarranty 1 year UPC Does not apply Surface Finish Standard Modified Item No Modification Description No.
$
189.07
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
★This Is a High-quality Woodworking Tenoning Fixture, Which Is Very Simple and Convenient to Install. 1x Woodworking Tenoning Fixture. ★Quick Clamping ... moreDevice, Use Chuck to Quickly Clamp Wood for Work.
$
23.61
Buy It Now
Free Shipping
Condition: New
Location: Woodburn, United States
The clamp features a 2" maximum jaw opening and a 3" throat depth to accommodate a variety of tasks. This locking clamp fastens directly to the drill ... morepress slot for quick, easy operation. Product Type: Toggle Clamp.
$
189.00
5d 18h 52m 54s
0 bids
Free Shipping
Condition: New
Location: China
PCB Holder Bench Vise Table Clamp 4 Flexible Arms Soldering Holder Desk Clamp. Universal Pcb Holder Jig Fixture Circuit Board Soldering Workstation Repair ... moreTool. 3PCS Cleaning Rubber Ball Manual Remove Dust Ball For Computer Keyboard Engraver.
$
419.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Flat Steel Capacity: 1.180" x .394" (30x10mm) Round Steel Capacity: .394" (10mm) Square Steel Capacity: .394" (10mm) Scroll Sizes: 3", 5", 7" .
$
78.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
The Steel Dragon Tools 2-1/8-inch high-speed steel annular cutter. This bit will quickly and safely cut holes in steel. This bit has a 2-inch cutting ... moredepth with a 3/4 in. Weldon shank..
$
50.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Winnetka, United States
I’ve read Parts of these Programming and Operations Manuals. There are So Many Possibilities. Saw Blade Guide Block Assembly. Operations of Automatic ... moreCycling. Operations of Model 2216. It may not have the original color cover as it is a Digitally Enhanced Quality Bound Copy.
$
40.68
Buy It Now
Free Shipping
Condition: New
Location: Wilmington, United States
This auction is for a very rare original power supply for the SECK 18:8:2 MKII mixer. This item is working strong! it has some blemishes as seen on the ... moreface plate. All cables are in great condition. Shipping is accurately based on buyers location. happy bidding!
$
57.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
This bit will quickly and safely cut holes in steel. Weldon shank. Weldon Shank. Bit size is etched on each cutter. Bit Size: 1-3/4 in. Automotive Tools. ... moreGolf Club Tools. HVAC Tools.
$
27.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
1 1/8" x 1" depth of cut high-speed steel annular cutter Diameter of cut: 1 1/8'' Cutting Depth: 1'' 3/4" Weldon Shank .
$
30.40
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
800w Woodworking Furniture Trimming Machine One-key Toggle 6.35mm Edge Trimming Product Parameters: Voltage: 110v 60hz Power: 800w Rated Speed: 30000r/Min ... moreShell Material: Aluminum Casing Net Weight: About 1500g Product Size: 8*8*22cm(3.14*3.14*8.66inch) Trimming Diameter: 6.35mm Quick Trimming Product Features: 1. Wide Range of Application, Suitable for Wooden Door Processing Factory Furniture Factory Handicraft Processing Diy Home Decoration and Other Purposes Arc Slotting Trimming, Edge Trimming, Diy Production, Craft Carving, Etc. 2. All-copper Motor with Strong Power and Low Calorific Value 3. the Fuselage Includes a Ruler for Precise Processing Depth 4. Aluminum Body Casing Is Durable and Waterproof and Dustproof 5. Rubberized Handle, Comfortable to Hold and Easy to Ope.
$
22.49
Buy It Now
Free Shipping
Condition: New
Location: China
Specifications: Type: HorizontalModel: DEMA-202FLBar Opens Angle: 100°Handle Opens Angle: 80°Holding Capacity: 227Kg/ 499LbsFinish: Zinc PlatedMaterial: ... moreCarbon Steel , PlasticMounting Hole Size: 6.5mmMounting Hole Distance: 25mm x 29mm(L*W)Screw Size: M8 x 50mmClamp Size: 245 x 46 x 90mm(L*W*H) Package Content: 1pcs x Toggle Clamp Description: This Horizontal Quick-Release Toggle Clamp, is a must-have addition to your jig assembly.Ideal for quickly holding down sheet metal or circuit boards, jigs for machine operation, welding, mould, woodworking, electronic equipment assembly, etc field. .
$
8.54
Buy It Now
Free Shipping
Condition: New
Location: China
The rubber clamping rod can hold the workpiece firmly without damaging the workpiece. Handle opening angle: 190 degrees. Material: stainless steel. Clamping ... moreforce: 45KG. 1 x stainless steel clip. Rubber head screw: M4 20mm.
$
25.00
Buy It Now
Free Shipping
Condition: New
Location: Nixa, United States
Untitled Document Free. Fast Shipping Every Business Day! EMCO Unimat 3 Mill Lathe Service Parts Manual Click for Our Complete Catalog Manual Description: ... moreNumber of Pages: 32. This is a reproduction. Not a photocopy, of a Emco Unimat 3 Mill Lathe Parts Manual only. This manual covers every part of the lathe. This contains all the accessories to the lathe, plus the milling machine attachment, the table saw attachment, the grinding attachment, the jig saw attachment. the three jaw chuck, four jaw chuck, steady rest, vise, dividing attachment, tool rest, etc. The exploded view diagrams are great just like the other Emco manuals. Don't Forget to Check Out the Instructions Man Overview: I have collected this information for many years and have found the information they contain to be priceless in using and setting up the machines properly. I believe this manual will be a valuable resource of knowledge that will provide a lot of helpful information that is often hard to find. My manuals are not photocopies. I maintain a high standard of quality in my reproductions. Most of the manuals I reproduce look better than their originals. I have professionally digitally edited every page. And removed stains, wrinkles and handwriting. All of the manuals are printed on thick white paper to withstand shop wear and tear. From our shop to yours. We get this. But you get this! Why settle for anything less? Check out my other manuals. Shipping: Returns: Contact Us: I may be running machinery. Or I may be mailing manuals, and can't hear the phone. If so. Please leave a voicemail and I guarantee that I will get back with you. Click here to see other work I do. And pictures of my shop. Be sure to add me to your favorites list. And check out our! I may have more than one manual that covers your machine. And I am adding new manuals all the time. I do not carry additional parts for machinery. Except for what is listed.
$
20.45
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
| | | | | | | High quality. Heavy-duty ball bearing design for long tool life! 0- 1/4" capacity. All working parts hardened, Alloy steel precision ... moreground and hardened. Black anodized finish for added protection! Versatile design for drilling applications on portable bench. Floor type drill presses, mills, lathes& more, Smooth jaw movement with advanced gripping torque, Jacobs Taper#1(1JT) mounted-we stock all size arbors in our Ebay store(see link below) 1MT. 2MT, 3MT, 4MT, 5MT, R8, 3/8" 1/2" 5/8" 3/4" 1" NMTB30, NMTB40, NMTB50, We stock the largest supply of chucks and arbors on Ebay! Great deals on drill chucks. Arbors, drill bits and more in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(ple
$
9.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
The Steel Dragon Tools® 1/4 in. x 3 in. pilot pin for use with 1-inch cutting depth high-speed steel annular cutters. Pilot pins help locate the center ... moreof hole location. Pilot pin helps locate the center of hole location and eject slug after drilling is complete. During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug..
$
38.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
1 5/8" x 1" depth of cut high-speed steel annular cutter Diameter of cut: 1 5/8'' Cutting Depth: 1'' 3/4" Weldon Shank .
$
68.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Bit size is laser etched on shank. 2-5/16" x 1-3/8 in. depth of cut carbide-tipped annular cutter Diameter of Cut: 2-5/16 in. Cutting Depth: 1-3/8 in. ... more3/4-inch Weldon Shank. Cuts holes in steel accurately, quickly, and safely. Large holes can be drilled up to ten times faster than regular drills bits. Make overlapping holes, slotting holes, and edge cuts. Machine-finish hole. No reaming needed when used with lubricant. .
$
86.06
Buy It Now
Free Shipping
Condition: New
Location: Dale, United States
Wood required, not included. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth ... moredefects or other reproductive harm.
$
399.99
Buy It Now
$156.27 Shipping
Condition: Used
Location: Bonita Springs, United States
If you are local, pick up is free! However will not be boxed. Located in Bonita Springs just off 75 at exit 116.
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Sioux Falls, United States
Felled | Draw Shave Knife – 5 IN Straight Draw Knife Straight Woodworking Tool.
$
16.19
Buy It Now
Free Shipping
Condition: New
Location: China
7/4Pcs Wood HSS Countersink Drill Bit Screw Set Wood Pilot Hole Woodworking Tool. 1/2" 5/16" 3/8" Square Hole Saw Chisel Auger Mortiser Drill Bit Woodworking ... moreTool. 6# To 12# Tapered Drill Countersink Bit Screw Set Woodworking Tools Quick Change.
$
76.49
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Full steel lathe chuck body, jaws are quenched and hardened. ... moreThe chuck will not rust easily in a dry circumstance, enabling longer service life.
$
71.31
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Product Description: Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel Jaws. ... moreHead swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
$
34.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
The Steel Dragon Tools 1-1/4-inch high-speed steel annular cutter. This bit will quickly and safely cut holes in steel. This bit has a 2-inch cutting ... moredepth with a 3/4 in. Weldon shank..
$
17.99
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Features: 1/4" round shank fits all handheld and stationary drills Five-flute design reduces vibration for smoother drilling and extended life Includes ... morea black oxide finish for added corrosion resistance Made from industrial grade high speed steel for increased durability Tip for countersinking most machinable metals, wood, and plastic Description: Tips for countersinking most machinable metals, wood, and plastic. Made from industrial grade high-speed steel for increased durability, each countersink has a black oxide coating to resist corrosion and a five-flute design that reduces vibration for smoother drilling and an extended life. .
$
6.30
Buy It Now
Free Shipping
Condition: New
Location: China
$
10.49
Buy It Now
Free Shipping
Condition: New
Location: Aurora, United States
BATTERIES. TOOLS& MORE CONTACT US WARRANTY INFO? Air Tools? Air Riveters? Air Saws& Blades? Compressors& Tanks? Grease Guns? Grinders& ... moreGinding Discs? Hammers. Drills& Screwdrivers? Hopper Texture Guns? Hoses. Reels& Accessories? Nail Guns& Nails? Paint& Spray Guns? Punch Flange Tools? Sand Blasters? Sanders? Sockets. Ratchets& Impacts? Automotive? Accessory Lights? Air Compressors& Portables? Air Horns? Auto Body& Frame? Auto Maintenance& Care? Diagnostic Tools? Electrical. Wiring& Testers? Jacks. Engine Stands& Hoists? Specialty Tools? Tie Downs? Tires& Wheels? Truck. Trailer& Accessories? Batteries? 12 Volt SLA Batteries? 12AH SLA Batteries? 17 18 20 AH SLA Batteries? 32 33 34 35 AH SLA Batteries? 4 4.5 5 AH SLA Batteries? 7 7.2 7.5 8 AH SLA Batteries? 9 10 AH Batteries? Misc. 12V SLA Batteries? 6 Volt SLA Batteries? 10. 12 AH SLA Batteries? 4. 4.5, 5 AH SLA Batteries? APC Computer Back Up Batteries? Motorcycle Batteries? 12N12A-4A-1? 12N12A-4A-1 AGM? 12N14-3A? 12N7-3B? 12N9-4B-1? 12N9-4B-1 AGM? 6N2-2A? 6N2A-2C? 6N4-2A? 6N4B-2A? 6N5.5-1D? 6N6-1B? 6N6-3B? 6N6-3B-1? B54-6? YIX30L? YT12B-BS YT12B-4? YT14B-BS YT14B-4? YT7B-BS YT7B-4? YT9B-BS YT9B-4? YTX12-BS? YTX12A-BS? YTX14-BS? YTX14AH-BS? YTX14AHL-BS? YTX14L-BS? YTX16-BS-1? YTX20-BS? YTX20L-BS? YTX24HL-BS? YTX4L-BS? YTX5L-BS? YTX7A-BS? YTX7L-BS? YTX9-BS? YTZ10S? YTZ12S? YTZ14S? YTZ7S? NiCd Batteries? AA NiCd Button Top Cells? Sub C NiCd Cells w/Tabs? Optima Blue Top Batteries? Optima Red Top Batteries? Optima Yellow Top Batteries? Other Batteries? Power Wheel Batteries? Replacement for GREEN Battery? Replacement for RED Battery? Replacement Dewalt Batteries? 12 Volt Dewalt Replacements? 14.4 Volt Dewalt Replacements? 18 Volt Dewalt Replacements? 24 Volt Dewalt Replacements? 9.6 Volt Dewalt Replacements? Replacement Lincoln Batteries? 12 Volt Lincoln R
$
199.00
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
High-quality Woodworking Tenoning Fixture. ★This is a high-quality woodworking tenoning fixture, which is very simple and convenient to install. 1X Woodworking ... moreTenoning Fixture. ★Quick clamping device, use chuck to quickly clamp wood for work.
$
34.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
1 1/2" x 1" depth of cut high-speed steel annular cutter Diameter of cut: 1 1/2'' Cutting Depth: 1'' 3/4" Weldon Shank .
$
19.57
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Description 3-Inch Steel Face Plate, with a 1" x 8 tpi mount. Use this spare faceplate for mounting extra bowl blanks. Perfect for all small bowl turning. ... moreFits any lathe with a 1" x 8 tpi spindle thread. This 3-Inch diameter faceplate has 4 screw mounting holes, and two machined flats to grip with a wrench - easy on and easy off. Features Perfect for all small bowl turning Fits any lathe with a 1-Inch by 8TPI spindle thread 3-Inch diameter faceplate with 4 screw mounting holes Has machined flats to grip with a wrench - easy on and easy off All steel construction UPC Does not apply Brand Yibei-tech MPN YI166488 Treated Material Steel.
$
38.21
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
BRAND NEW 9 Pairs Wavy Parallel Set 1/2 to 1-1/2 Gages Harden Steel Machinist Tool .0002''Material: High Quality Spring Steel Each Parallel Hardened and ... morePrecision Ground For Use On Precision Clamping For Drilling, Milling, Boring, Grinding, And Assembly Operations 9 Pairs: 1/2" To 1-1/2" x 1/8" Increments +/- .0002" Parallelism Thickness Of The Spring Steel 0.3mm Contents Include: (2) 1/2'' (2) 5/8'' (2) 3/4'' (2) 7/8'' (2) 1'' (2) 1-1/8'' (2) 1-1/4'' (2) 1-3/8.
$
35.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
This bit will quickly and safely cut holes in steel. Weldon shank. Weldon Shank. Bit size is etched on each cutter. Bit Size: 1 in. Automotive Tools. ... moreGolf Club Tools. HVAC Tools.
$
339.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Bending, rolling and riveting tool. Shear Punch Screwing Spiral Riveting Bending. In all in one (4) piece kit! Golf Club Tools. Cable Wire Hoist. Hanging ... moreMagnets. Floor Mats. Automotive Tools.
$
179.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
These bits will quickly and safely cut holes in steel. Weldon shank. Bit sizes included: ½ in., 5/8 in., ¾ in., 7/8 in., 1 in., 1-1/8 in. Annular cutter ... morekit with six (6) cutters and one (1) pilot pin.
$
58.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
2 1/16" x 1" depth of cut high-speed steel annular cutter Diameter of cut: 2 1/16'' Cutting Depth: 1'' 3/4" Weldon Shank .
$
83.88
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Features: 1/2" Shank Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general ... morepurpose cutting action Wrenches included Fitted case included Holders have black oxided smooth finish and marked with tool holder style and shank size Description: Carbide Indexable Turning Tool 1/2" 7 pc Lathe Tool Bit Set Thread Insert+Holder 1/2" shank, 7-piece turning tool set is ideal for a wide variety of projects. Supplied with right hand and left hand turning/facing tool holders and one threading and cut-off tool. Indexable inserts ensure cutting surfaces stay sharp. .
$
37.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
This bit will quickly and safely cut holes in steel. Weldon shank. Weldon Shank. Bit size is etched on each cutter. Bit Size: 1-3/16 in. Automotive Tools. ... moreGolf Club Tools. HVAC Tools.
$
39.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
This bit will quickly and safely cut holes in steel. Weldon shank. Weldon Shank. Bit size is etched on each cutter. Bit Size: 1-1/8 in. Automotive Tools. ... moreGolf Club Tools. HVAC Tools.
$
56.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Erie Tools replacement blade set for Erie Tools manual metal shear TT-372103. Blades are 8 in. and made with precision ground hardened steel. Blades are ... moresuitable for shearing carbon steel plate, sheet metal, rebar, and round stock..
$
16.05
Buy It Now
Free Shipping
Condition: New
Location: China
Specifications: Type: HorizontalModel: Type: HorizontalModel: BRH-101-AHandle Opens Angle: 56°Bar Opens Angle: 100°Holding Capacity: 50Kg/110LbsFinish: ... moreZinc PlatedMaterial: Carbon Steel , PlasticMounting Hole Size: 4mmMounting Hole Distance: 22mm x 16mm(L*W)Screw Thread Size: M5 x 34mmClamp Size: 80 x 53 x 33mm(L*W*H) Package Content:3pcs x Toggle Clamp Description: This Horizontal Quick-Release Toggle Clamp, is a must-have addition to your jig assembly.Ideal for quickly holding down sheet metal or circuit boards, jigs for machine operation, welding, mould, woodworking, electronic equipment assembly, etc field. .
$
18.49
Buy It Now
Free Shipping
Condition: New
Location: Sioux Falls, United States
DCT | Abrasive Belt Cleaner ?. DCT Wood Pen Blank Centering Vice ?. Pen Making Center Marking Finder Tool. Center point drill bit set is designed to drill ... morestraight into a piece even when the surface is round or on an edge.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
 In 

Former Listings  
 
Original Zyliss Profi-King Hobby Shop Vise Clamp Woodworking Metal - Switzerland
Up for sale is an original Zyliss Profi-King Vise Clamp from Switzerland. The parts are in excellent condition. It was barely used and includes an instruction booklet and all the necessary parts and pieces. Please contact us with any questions. And happy bidding! 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14b6b52eac8-0x116-
Craftsman #391-5195 Table Mount Woodworking Vise
CRAFTSMAN#391-5195 Table Mount Woodworking Vise. Opens to 12" and Jaws are 4"x10" It is a quick release vise and is in VERY GOOD SHAPE
Vintage Columbian Gyro Vise - Gunsmith Machinist Woodworking - Like Versa Vise
Vintage Columbian Gyro Vise- Gunsmith Machinist Woodworking- Like Versa Vise This is for a vintage Columbian Gyro-Vise from a local estate. The post is mounted to a table and the vise can then be positioned either upright or on it's side. I took a lot of pictures so you could see it's condition so please look at them closely. It has a lot of wear from use. A lot of staining/spotting/dirt including some rust from storage, and a lot of paint loss, but overall it's in good working condition, opens and closes easily, and when clamped to an item tigthens to the post. The jaws are 2-1/2" wide x 3-1/2" high with a maximium opening of approximately 5" If you have any questions. Please let me know. Thanks for looking and God Bless! Winning Ohio bidders are repsonsible for a 8.0% Ohio Sales Tax. International auction winners ... moreare responsible for knowing and paying any applicable duty.
Brodhead-garrett 500x Woodworking Vise
This vise has 7" jaws and opens to 9" It is not a quick release. I've cleaned this up and it's ready for you to put it to work. This weighs in at almost 30 lbs so I'm willing to work with you on affordable shipping or local pickup. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b6df2c112-0x10c-
NICE MODERN #M741 WOOD WOODWORKING VISE BENCH SHOP TOOL WORK HOLDING
UP FOR YOUR CONSIDERATION IS: NICE MODERN#M741 WOOD WOODWORKING VISE BENCH SHOP TOOL WORK HOLDING. PURCHASED AT AN ESTATE SALE. NICE CLEAN UNIT. OPENS AND SECURES PROPERLY. JAWS 1-1/2" WIDE AND OPENS TO APPROXIMATELY 1-3/4" NO ID ENGRAVING. SOLD AS IS" REVIEW PICTURES FOR DETAILS. PLEASE TAKE A MOMENT TO BROWSE MY E-BAY STORE FOR ADDITIONAL UNIQUE ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items.
VINTAGE WALKER TURNER CO THE DRIVER CLAMP ON BENCH VISE WOODWORKING HOBBY
VINTAGE WALKER TURNER CO THE DRIVER CLAMP ON BENCH VISE WOODWORKING HOBBY Search PLEASE READ ALL THE TERMS AND INSTRUCTIONS AND ASK QUESTIONS BEFORE BIDDING. THANKS WE WILL GLADLY COMBINE SHIPPING ON MULTIPLE ITEMS Bid now or use the"BUY IT NOW" to assure that you win this ITEM: Vintage Walker Turner Co"The Driver" clamp on bench vise. The jaws open to approximately 2 3/4' and are 2 1/2" wide. The vise will clamp on to a bench 1 3/4" thick. ERA: 1950s CONDITION: Very good SPECIAL ATTRIBUTES: Made in the USA SHIPPING METHOD: International please email for shipping cost before bidding please. Shipping method is USPS priority. THERE IS NO SUCH THING AS A STUPID QUESTION SO FEEL FREE TO ASK. We will do our best to describe items. Grading and condition are subjective so if ANYTHING is of a concern to you PLEASE ... moreask questions. Colors are subject to the adjustments on your computer screen and if you use a mobile device please view the item on a full size computer screen before bidding or buying. Again keep in mind that most of our items are either vintage.Antique or used. Payment must be received within 3 days. Thank you for your bid and be sure to look at our other auctions. The winner will be contacted at the auction close for checkout information. View My Other Items For Sale
Columbian 7-CD Cleveland Woodworking Vise Clamp Carpenter Woodworkers Vice
Columbian 7-CD Cleveland Woodworking Vise
COLUMBIAN 6'' Jaw Woodworking Vise Carpenter Under Bench Mount Vice Cleveland OH
VINTAGE COLUMBIAN 6' Jaw Woodworking Vise Carpenter Under Bench Mount Vice Cleveland OH SEE PICTURES FOR MORE DETAILS AND EXACT CONDITION COLUMBIAN Woodworking Vise Carpenter Under Bench Mount Vise. Mfd by the Columbian Vise co.Cleveland Ohio USA Vise is in good condition 6' jaw width. 3' depth jaw. Jaws open up to 7' 13' overall length when opened.
VINTAGE LITTCO WOODWORKING VISE CLAMP CAST IRON TOOL LITTLESTOWN PA USA
VINTAGE LITTCO WOODWORKING VISE CLAMP CAST IRON TOOL LITTLESTOWN. PA USA This item is a vintage used item. I found it in an estates sale. This item is in very good working condition. Has minor signs of rust under peeling paint. I cleaned it and put some lubricant. Please see pictures for more details. The clamp measures: 5" x 5" x 7" Jaws Width is 5" Jaws opening is 3" Shipping Info: No shipping to PO BOX. The cost of shipping is calculated by eBay. I enter a weight and eBay calculates the cost by weight. Package size and the distance it has to travel.
Vtg Craftsman Woodworking Under Bench Mount Vise #5204 Carpenter, Wood
here is a vintage under bench mount vise.Only mark is the number 5204,good working order
VTG CRAFTSMAN MITER VISE MINT IN BOX No. 9 3279 Woodworking Tool CARPENTRY
VINTAGE CRAFTSMAN MITER VISE FOR USE WITH RADIAL ARM SAWS TO MAKE PERFECT PICTURE FRAMES EVERY TIME. COMPLETE WITH ORIGINAL BOX AND PAMPHLET. THE BOX SHOWS A LITTLE WEAR FROM BEING STORED BUT THE MITER VISE IS IN AS NEW CONDITION Buy it now or make an offer We aim to please as evidenced by our Stellar Feedback Rating
Vintage Woodworking Hand Screw All Wood Carpenters Clamp L@@k Tools Hand Vise
Your Bid For This Vintage Hand Screw All Wood Carpenters Clamp In Good Condition. Questions Welcome And NO RESERVE!
Littco Vise 10" Quick Release Woodworking Under Bench Carpenter Vise No. 200
Up for bid is a Littco No. 200 Quick Release Under Bench Carpenter Vise. It is in good working condition. 2 1/2" Depth Jaw. 9 3/4" Jaw width, Jaws open up to 10" 18" long when closed. Vise weights about 25 lbs. The bidding will start at $0.99 with no reserve. Please check out the photos and let me know if you have any questions. The vise in the pictures is the one you are bidding on.
G.M. Yost Patternmakers Vise Pattern Maker Emmert Turtleback Woodworking Swivel
G.M. Yost Patternmakers Vise Pattern Maker Emmert Turtleback Woodworking Swivel A SPECIAL PIECE OF HISTORY IN WOODWORKING ONE KNUCKLE ON SWIVEL POST NEEDS BRAZING WORKS GREAT AS A FLAT CLAMP AS IS FAST FREE SHIPPING FAST WILL BE PROPERLY WOOD CRATED AND SENT FED EX FRIEGHT
Benchcrafted Carver's Vise Kit, Woodworking, Wood Carving
This auction is for a Benchcrafted Carver's Vise Kit. I purchased this new a few years ago from Benchcrafted for approximately $379. I've never gotten around to building it so I'm passing in on to someone with the time to turn all the parts into a vise. There is a great description of this vise and the building process on the Benchcrafted website under the"downloads" tab. When I received this vise some of the parts had rubbed together in shipping and the black finish is a bit scuffed or dinged in some areas. None of it is very significant and will probably easily buff out or blend in once assembled. Everything is complete. Just today I downloaded the instructions and they are included. This item is heavy so I think the best shipping is probably USPS flat rate shipping. I can combine shipping. Just please tell me you ... moreare bidding on other items so payment might be delayed. Then let me know when you're done bidding or send a request for total and I'll send an invoice. US shipping addresses only please. Please no returns. I am not a dealer. These items are from my own personal shop. If you find a defect or damage I haven't described please contact me and I'll make it right. Thanks for looking.
WILL-BURT VERSA-VISE Model #4-1043-5 Woodworking Gunsmith Blacksmith USA - NICE
This is a very nice WILL-BURT VERSA-VISE Model#4-1043-5 that functions properly and all of the parts are in good to excellent condition. Please look at all of the pictures carefully. Thank you for taking time to look.
WILTON PROFESSIONAL “L-SHAPED” WOODWORKING VISE MODEL: 76A
WILTON PROFESSIONAL“L-SHAPED” WOODWORKING VISE MODEL: 76A MADE IN THE USA SPECIFICATIONS: JAW SIZE: 7" WIDE x 7" DEEP MAXIMUM OPENING: 9" DESCRIPTION: UNIQUE L-SHAPED JAW DESIGN PROVIDES 5 TIMES MORE VERTICAL CLAMPING SURFACE THAN ANY OTHER CONVENTIONAL 7" VISE HAS TO OFFER. SEMI-STEEL CASTING CONTINUOUS SCREW DOG FOR SECURE GRIP ON STOCK OFFSET GUIDE BARS FREE 3" OF JAW FACE FOR VERTICAL CLAMPING
Craftsman Clamp On Woodworking Vise Aluminum Bench Corner Angle Mount USA Vtg
Craftsman Clamp On Woodworking Vise Aluminum Bench Corner Angle Mount USA Vtg. Offered is a Craftsman clamp on style woodworking vise. As pictured. Marked"Craftsman" This is a nice older tool(Made in USA) with body made of cast aluminum alloy and plated steel adjustment screws. Similar to a Stanley No702. This medium duty or casual use vise is portable and clamps to a bench, table or whatever is handy. Jaw face is about 5-1/2" wide and opens to about 3" Mounting opening is about 2-1/4" max. The vise is in very decent. Serviceable condition. Please note that the tool has only been wiped off to take photos and the appearance could benefit from a proper cleaning. The screws work smoothly and are rust free. Finish is good, but as can be expected, does show some paint chips scratches(see photos) Swivel pad on end of mounting ... morescrew is original and in excellent condition. Ready to work and worthy of your consideration. I am confident the buyer will not be disappointed with the purchase. Item is warranted to be as described and sells with no reserve. COPYRIGHT NOTICE- All content seen here. Including: HTML coding, photos, artwork, and text content is copyright protected as intellectual property and may not be used without written permission from its owner. I have additional related professional grade and collectable tools at auction and will gladly combine orders to save on shipping cost. SKU 8S082-AL- As 2 11.45 Reg A inkfrog terapeak. InkFrog Analytics.
VINTAGE CRAFTSMAN WOODWORKING UNDER-BENCH VISE/VICE 506-51920 MADE USA Parts/Rpr
ALL INT ER NATI O NAL B I DD E RS! ALL posted shipping rates are" USA"48-50 states- ONLY as the EBay System may/may NOT list correct International shipping rates! IF YOU INTEND To Bid, YOU MUST EMAIL BEFORE Placing Your Bid, PRIOR to BIDDING to BUY) for YOUR Correct Shipping Rate Estimate for BIDDING/BUYING this Item. We follow EBay rules for Non-Compliance) We Strive to EARN YOUR Trust/ Respect& Business- With YOUR Purchase/Winning Bid. Please honor our 3 DAY PAYMENT-After Auction CLOSE, rule for ALL OUR Auctions. Today YOU are Bidding on: An ESTATE/ BARN Sale FIND. VINTAGE CRAFTSMAN WOODWORKING UNDER-BENCH VISE/VICE 506-51920 MADE USA. it is in the non-functional/non-working BUT Excellent Physical Condition. As it is missing another portion of the vise/vice, selling for parts/repair only as missing that 1 piece& in as ... moreis condition with NO returns for this item due to both its vintage nature& missing part. It is in the Condition as seen in pictures. Please verify all Pictures& make your own opinion/evaluation of the actual condition. If AGREEABLE. Then place your BEST bid to WIN, accordingly. No Reserve- NR- Bid to Buy It Now* ALL INT ER NATI O NAL B I DD E RS! ALL posted shipping rates are"USA"48-50 states- ONLY as listings may/may not state! IF YOU INTEND To Bid. YOU MUST EMAIL BEFORE Placing Your BID, PRIOR to BIDDING) for YOUR Shipping Rate Estimate for BIDDING/BUYING this Item. we are NOT responsible for any/all customs fee's/hold times) Quoted shipping is for locations within the continental United States only unless otherwise stated. Hawaii. Alaska, Puerto Rico, and international addresses may/will cost more. ALL WINNING BIDDERS- YOU MUST USE YOUR PAYPAL REGISTERED MAIL ADDRESS FOR ANY& ALL DELIVERIES. CHANGES From/Of/To YOUR REGISTERED PAYPAL DELIVERY ADDRESS WILL NOT BE ALLOWED for any& ALL purchases.
Swiss made Zyliss wood carvers vise bench clamping holder tool woodworking
Estate find. Nice vise, mounts to bench with a special clamp, 4" wide jaws are 5" tall, opens 6" AS IS AS SHOWN. Please see my other auctions for steampunk items. Pulleys, hardware, garden cultivators, and tools; primitives, and more. We will be liquidating a large estate consisting of military items. Woodworking tools, automotive tools, machinists tools, mechanics tools, collectibles, antique and primitives and more. Please put us in your favorites you will not be disappointed. Please note. Unless noted as new, the items I am auctioning are old and/or used. Because of this, they are sold AS IS, as found, the same as in any other auction. I will try to describe these items to the best of my ability and would not misrepresent anything intentionally. I list the defects, problems and imperfections I see on the items, but I can ... moresometimes miss something or make a mistake. I will admit that I am not an expert on everything I sell so please look at the pictures for condition and e-mail me with any questions before bidding. I try to answer every question asked, but cannot guarantee an answer if you ask the day the auction ends. All items are sold AS IS AS SHOWN. NO REFUNDS AND NO RETURNS. INTERNATIONAL BUYERS PLEASE E-MAIL FOR SHIPPING COST BEFORE BIDDING. PLEASE CHECK WITH YOUR COUNTRIES SHIPPING RESTRICTIONS BEFORE YOU BID. WE WILL NOT BE RESPONSIBLE IF ITEMS CANNOT BE LEGALLY SHIPPED TO YOU. ALSO PLEASE DO NOT ASK US TO SHOW AS A GIFT OR MISREPRESENT THE CONTENTS OR VALUE. WE WILL NOT! Please see the shipping calculator. E-bay is now charging fees on the shipping also, I normally ship via USPS or UPS. We have a handling/packaging charge of $6.00 included in our shipping charges(this is not your total shipping, you must see the shipping calculator or flat rate shipping in the item description)Our $6.00 covers packaging material and time and gas to get it to the Post Office or UPS office. PLEASE ASK SHIPPING QUESTIONS BEFORE THE AUCTION ENDS. IF YOU WOULD LIKE IT SHIPPED A DIFFERENT WAY PLEASE ASK BEFORE
Wooden Screw Vise with Handle Carpentry Tool Antique Woodworking Folk Art 24 in.
Pictures tell the story. This wooden vise is 24 inches long from tip to top of head. Has a 17 inch handle. And seems to have about a 3 inch diameter screw line. End of handle unscrews for ease of shipping and is a good feature. I find nothing wrong with this old piece, seems to have been stored inside for a long time. Bench Vise. PayPal is best for me. Packed and shipped same day as payment. Email with questions please. I usually use USPS priority mail. Powered by The free listing tool. List your items fast and easy and manage your active items.
COLUMBIAN WOODWORKING VISE 7" wide x 4" high, Opens 9 1/8"
COLUMBIAN WOODWORKING VISE Jaws are 7" wide x 4" high. And Opens 9 1/8" Vise mounts under the bench. These vises's are in nice operating condition.
Craftsman woodworking 7 inch vise, circa 1960s, unused
Circa 1960s/70s unused Craftsman 7" woodworking vice. Some pitting on one rail. Includes original box, attaching hardware and instructions.
Antique Wooden Primitive Hand Saw Vise Clamp for Sharpening TOOL WOODWORKING
You’re bidding on an Antique Wooden Primitive Hand Saw Vise Clamp for Sharpening TOOL WOODWORKING Thanks for looking and good luck. Pennsylvania Residents or local pickup will be charged 6% sales tax on the final price. We do combine shipping on certain items. However often large or heavy items(such as lots of tools. Hardware, Etc. will have to be shipped individually. For most lots will typically us priority flat rate boxes. Google Us: Kettering Enterprises Check out my! Be sure to add me to your! WE ONLY SHIP USPS/FEDEX. RETURNS AND REFUNDS Refunds will be for the original price paid. Purchased items must be returned within(14) days after you receive your item. Item must be shipped back to me unless we work out another solution. Buyer is responsible for return shipping. The returned items must be in the exact condition of which it was received ... morewith all original attachments and original packaging materials. If your purchased items are received in unsatisfactory condition. We will work with the buyer to achieve a satisfactory result. No returns for a change of mind in purchase decision. Insured items must be returned for us to make claim and you must wait for claim to be paid could take a few weeks depending on post office. Items described and pictured to the best of our ability but can't be perfect. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14ba4d747e9-0x10c-
Columbian 10" Quick Release Woodworking Vise No. 9R - factory paint - very nice!
This is a vintage Columbian 10" quick release woodworker's vise. Model No. 9R. It appears to be in perfect operating condition, and as a bonus still has it's original factory paint. Model 9R. As mentioned. It is a quick release vise. That makes these very easy to use. just turn the handle back(counterclockwise) to release the mechanism, slide the front jaw in to position it, and then tighten the handle to set it. Very easy to use! The quick release mechanism works well, and the threads on the screw appear to be in very good condition. At 10" wide, you have more clamping surface and the vise is more versatile than the more common The paint appears to be original. I don't notice anything broken. Cracked or damaged. The wood handle is even in very good condition. This weighs about 35 pounds. 21" long, 10" wide, ... more8" high. It's in ready-to-be-put-to-work condition! As indicated above. This vise weighs about 35 pounds. Packaging will add to that, so I've entered 37 pounds for the shipping cost estimate program. This is too long for any of the Flat Rate shipping boxes. Please be sure to chose between standard ground shipping and Priority Mail. I have included a very detailed set of photos. Please look those over carefully to assess condition. The most economical way to ship this will probably be one of the ground based parcel services. If the buyer has a shipping preference(UPS. FedEx, other? please let me know and I'll try to accommodate. This listing has been setup to sell in USA only. If someone is interested who lives outside of the USA, please email me and I'll look into shipping possibilities and estimated costs. Local pickup is welcome, in which event shipping costs will be waived. Let me know if you have any questions. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
Signed F.H. DVORAK Antique Wooden Woodworking Carpenters Clamp Vise Threaded
Antique Signed F.H.Dvorak Wooden Screw Clamp Vise Early Primitive Woodworking Carpentry Tool Two threaded wooden rods with wooden handles tighten or loosen the clamp. Opens to 10" Powered by The free listing tool. List your items fast and easy and manage your active items.
P & B England Side Bench Table Mount Woodworking Vise 2"x6" jaw Vintage Vice
P& B England Side Bench Table Mount Woodworking Vise. 6" jaw. 2' jaw depth. Vise is in good vintage condition.Solid no cracks or repairs. Most of its original green color remains. fully functional.
WILTON WOODWORKING VISE 176 LISTING # 2
Lightweight design is perfect for home craftsmen, High-tensile iron jaws provide strength and durability, Pre-cast mounting holes allow for installation of wood jaw faces, Cold rolled steel guide bars and chrome-plated screw offer strength and integrity to the tool, Throat Depth, 3 in. Jaw Width, 6-1/2 in. Length, 8.25 in. Best Use, Woodworking, Unit of Measure, EA, Height, 4.1 in. Width, 7.3 in. 176. Light-Duty Woodworkers Vise- Mounted Base, 6-1/2 in. Jaw Width, 4-1/2 in. Maximum Jaw Opening- WMH33176,
STANLEY No 702 Woodworking Vise-perfect Condition, Original Box
Perfect condition. Looks to be brand new never used. Although I am not the original owner so I cannot say for sure that it has never been used. Look at pictures closely, you will not find one in better condition.
c CLAMP VISE CAST IRON CARPENTRY WOODWORKING ANTIQUE TOOL SET OF 4 MADE IN USA
c CLAMP VISE CAST IRON CARPENTRY WOODWORKING ANTIQUE TOOL SET OF 4 MADE IN USA SZ 4 1/4" GOOD PRE-OWNED/ USED SHAPE. SOME OXIDATION OF METAL, SWIVEL ENDS, APPROX. 4 1/4" I TAKE PICS BECAUSE I AM NOT AN EXPERT ON ITEMS I HAVE FOR SALE. PLEASE LOOK AT PICS THEY ARE PART OF THE DESCRIPTION AND MAY SHOW CONDITION BETTER THAN MY TYPED WORDS. PLEASE FEEL FREE TO ASK AS MANY QUESTIONS AS YOU LIKE ABOUT THIS ITEM,REQUEST MORE PICS& RESEARCH THIS ITEM FURTHER SO YOU CAN BID WITH CONFIDENCE. PLEASE NOTE IF THERE IS FREE SHIPPING IT'S WITHIN THE STATES, ALL INTERNATIONAL ORDERS OVER $49.99 WILL BE SHIPPED PRIORITY SO PLEASE WAIT FOR INVOICE. Thank you in advance for your consideration GOOD LUCK WITH YOUR BIDDING THIS NEEDS A NEW HOME! PLEASE VISIT MY STORE Be sure to add me to your favorites list! I ship through the eBAY site they ... moreauto upload tracking. And have receipts. IF YOU ARE OUTSIDE OF THE U.S. PLEASE remember you are responsible for customs fees in your country! I photograph& log all packages shipped outside U.S. I use new& recycled materials for shipping. My responsible contribution to the planet. YOUR SATISFACTION& POSITIVE TRANSACTION EXPERIENCE IS IMPORTANT TO ME. Thank you! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14bb448fa6b-0x10d-
Large Antique Wooden Screw Carpentry and Woodworking Clamp/Vise Hallmarked
Large antique wooden screw hand clamp/vise used for carpentry and woodworking as shown in the photos. Hallmarked. 12 in jaws. 18 in tighteners. CLICK ON PHOTOS TO VIEW ENLARGED IMAGE See photos for cosmetic condition and content of lot. Eclectic Broker ships on Tuesdays and Fridays. CA Sales Tax will be added to all items shipped to a CA address. Item Number- 35795 Copyright 2014 Eclectic Broker
A. L. Bemis Patented 1912 rare under bench woodworking vise collectible tool
Estate find. All as found, weighs 19 pounds, opens and closes, but needs clean up from long storage, rust and dirt, AS IS AS SHOWN. Please see my other auctions for steampunk items. Pulleys, hardware, garden cultivators, and tools; primitives, and more. We will be liquidating a large estate consisting of military items. Woodworking tools, automotive tools, machinists tools, mechanics tools, collectibles, antique and primitives and more. Please put us in your favorites you will not be disappointed. Please note. Unless noted as new, the items I am auctioning are old and/or used. Because of this, they are sold AS IS, as found, the same as in any other auction. I will try to describe these items to the best of my ability and would not misrepresent anything intentionally. I list the defects, problems and imperfections I see on the items, but I ... morecan sometimes miss something or make a mistake. I will admit that I am not an expert on everything I sell so please look at the pictures for condition and e-mail me with any questions before bidding. I try to answer every question asked, but cannot guarantee an answer if you ask the day the auction ends. All items are sold AS IS AS SHOWN. NO REFUNDS AND NO RETURNS. INTERNATIONAL BUYERS PLEASE E-MAIL FOR SHIPPING COST BEFORE BIDDING. PLEASE CHECK WITH YOUR COUNTRIES SHIPPING RESTRICTIONS BEFORE YOU BID. WE WILL NOT BE RESPONSIBLE IF ITEMS CANNOT BE LEGALLY SHIPPED TO YOU. ALSO PLEASE DO NOT ASK US TO SHOW AS A GIFT OR MISREPRESENT THE CONTENTS OR VALUE. WE WILL NOT! Please see the shipping calculator. E-bay is now charging fees on the shipping also, I normally ship via USPS or UPS. We have a handling/packaging charge of $6.00 included in our shipping charges(this is not your total shipping, you must see the shipping calculator or flat rate shipping in the item description)Our $6.00 covers packaging material and time and gas to get it to the Post Office or UPS office. PLEASE ASK SHIPPING QUESTIONS BEFORE THE AUCTION ENDS. IF YOU WOULD LIKE IT SHIPPED A DIFFERENT WAY PLEASE ASK
vise,attachment,blacksmithing,woodworking,tool
this is a small vise attachment. measures 2.25" x 1.75" No name or date. Has some wear please see images.
woodworking carving engraving ball vise clamp adjustable swivel base
heavily built ball swivel base for carving or engraving vise mount or direct mounting of the workpiece. 015-02-04-17-653 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost(applies only to items shipped by truck freight) EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– NO ... moreRETURNS FOR ANY REASON OTHER THAN DEAD ON ARRIVAL YOU WILL BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED. INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos or video of operation for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance.
Champion Handy Vise Geneva Ohio w/ Partial Decal Label Woodworking Type Clamp On
Good condition; Has rust and missing black finish; Has a partial decal label. If you have any questions. Please contact me through the Ebay email system. Please see my Ebay Store for shipping and email schedule. I frequently cannot answer email for a few days. International buyers please contact me for shipping quote. International shipping includes a 1.00 handling charge and a fee to cover Ebay fees on the shipping amount.
ABERNATHY NO. 70 QUICK RELEASE WOODWORKING VISE
RIMCO ROBERT IVENS MACHINERY COMPANY 613 W. Bruce St. Milwaukee WI 53204 414-272-6686 Welcome to Robert Ivens Machinery Company Our Mission: Productive and Satisfied Customers. Up for AUCTION: ABERNATHY NO. 70 QUICK RELEASE WOODWORKING VISE In used condition No cracks. Bends, or other related damage- top has some sanding marks(see photos) No rust or patina All screws and locks look original- handle is a replacement and I bet if you turned a nice wooden one you'd really have something here! Jaws are 4 x 7" max opening of 8.5" Lead screw and slides in good shape Pop up bench dog Nice piece for use or to add to the collection! Check photos for details Email us with any questions! WE COMBINE SHIPPING! Check out my! Be sure to add me to your! Robert Ivens Machinery Company(RIMCO) is Wisconsin's largest dealer in used woodworking ... moremachinery A sole proprietorship in business for more than twenty-five years, RIMCO's business philosophy is based upon value and customer satisfaction. If you have an interest in woodworking machinery. You are welcome to call and ask about our extensive. Ever changing inventory. Your business will be most appreciated. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14bbeaaa563-0x111-
Vtg -STANLEY No. 700 -CLAMP ON- Portable - 4"- Woodworking Bench Vise-SHIPS FREE
Vintage- STANLEY- No. 700 CLAMP ON- 4" Woodworking Bench Vise Made In The U.S.A. Made in U.S.A. Price Includes Shipping! We have for your consideration a Vintage- Made in U.S.A. STANLEY No. 700-CLAMP ON- Portable- 4" Woodworking Bench Vise- that would appear to be in average overall vintage working condition! The vise turns freely and just seems to work the way it is supposed to. Another testimony to these MADE IN U.S.A. tools- they were designed to work- be worked on and last a lifetime or two! What can we say- please take a good look at all(12) pictures. you are seeing the vise absolutely just the way we got- will need cleaning. The vise jaws measure 4 inches and the vise opens up to a use-able 4-1/2 inches. The vise is used and in average overall vintage condition. The vise shows wear/ paint over-spray/ scratches/ scuffs/ marks ... moreand hammer strikes from normal use(see pics) Please note: obviously the backing board needs to be replaced(see pics) we only mention this for accuracy as it does not detract from the usefulness of the vise. Just a reminder: what you see is what you will be getting and once more- Pri ce Includes Shipping! Please look at the pictures carefully and do not hesitate to ask questions before bidding. Thanks for doing business with us! OK. Time for the LARGE Fine Print: In the interest of making this a very pleasant experience for everyone. We would respectfully ask that all potential bidders read the below statements. 1) We respectfully ask that all winning bidders pay for their purchase using Paypal within 3 days of the auctions ending or immediately if a“buy-it-now” item is purchased. 2) Winning bidders live in the United States and your item purchased will be shipped to the same address you listed for Paypal. 3) We ONLY ship within the lower 48 continental United States. No exceptions. We ship items within 3 business days after payment has been received. 4) Return Policy: Sorry NO Returns on this item. Being sold strictly“as-is” Special Note: If you have
Vintage Craftsman woodworking 7 inch vise, 1960s, 391-5191 USA
Please review the pictures carefully: they are part of the description. Vintage rare Craftsman 391-5191 7" vise good condition. Doesn't have owner markings. See photos for more details. SOLD AS-IS) Will combine on shipping. If you purchase multiple Item. I will send a revised invoice with combined shipping discount. We welcome all of your questions and do our best to happily and promptly respond. We leave feedback after you. Be sure and check out the other Items I have for sale thank you.
Vtg. COLUMBIAN 6'' Jaw Woodworking Vise Carpenter Under Bench Vice Cleveland OH.
Columbian woodworking vise. No cracks. It is in very good condition. Model No.8CDM2-1. Made In USA 6' jaw. Jaws open up to 8' 3'jaw depth. Vice weights about 10 lbs. Vise is in very good condition. THIS VISE WAS NOT SAND BLASTED OR REPAINTED.WHAT YOU ARE LOOKING AT ITS JUST CLEAN BARE METAL* I have made an honest and fair evaluation of this item. But I am only human. I do miss things occasionally, and if things is not as I have represented it, I certainly will do what I can to make it right. I reserve the right to change mail carriers.I pack all packages very carefully and as lightly as possible.I ship whichever postal method is the least expensive for each individual package and I will combine shipping for discounts so please check my listings to get the most bang for your buck! Most packages ship the next day after payment but ... moreplease allow 2 days as my schedule is unpredictable and if you are in a hurry please tell me and I will make a point to get it out the next day. I report ALL NON PAYERS so if you are not going to pay.don't buy. If you have a problem and need more time. Please ask as I will work with you, but deliberate non payers and non communicators will be reported. I welcome ALL INTERNATIONAL buyers but please be aware of a couple things.I usually ship Priority International,however insurance is not available with this service nor is tracking once it leaves the United States.Also please be aware of your country's Duty Regulations as to what is allowable in your country and what the possible duty fees are as this is not covered in your purchase price.
Vtg XACTO Knife Lot Stand Vise Articulating Hobby Holder Tool Razor Woodworking
Lot of XACTO hobby knife tools and vise/articulating stand. As shown, all made in USA. The stand has a heavy cast iron base. The knife tools have scuffs and scratches but no major flaws or damage. Will ship out next business day after purchase. Thank you.
Viintage 10" Jaw Woodworking Under Mount Bench Vise No.2433 Made In USA
Up for auction is this.Woodworking Vise Carpenter Under Bench Mount Vice. Made In USA. Vise is in very good condition. 7' jaw width. 3' depth jaw. 10' jaw width. Jaws open up to 9' 18' O.A.L when closed. Vise weights around 21 lbs This vise will be a good addition to your carpentry work shop. THIS IS A NOT QUICK RELEASE VISE* THIS VISE WAS NOT SAND BLASTED OR REPAINTED.WHAT YOU ARE LOOKING AT ITS JUST CLEAN BARE METAL* I have made an honest evaluation of this item. But I am only human. I do miss things occasionally, and if things is not as I have represented it, I certainly will do what I can to make it right. Please remember when buying vintage or used items,they have had a life before they reach you. Items will always have some wear and will rarely look new. Please look at all pictures and ask any questions before bidding ... moreI reserve the right to change mail carriers.I pack all packages very carefully and as lightly as possible. I ship whichever postal method is the least expensive for each individual package and I will combine shipping for discounts so please check my listings to get the most bang for your buck! Most packages ship the next day after payment but please allow 2 days as my schedule is unpredictable and if you are in a hurry please tell me and I will make a point to get it out the next day. I report ALL NON PAYERS so if you are not going to pay.don't buy. If you have a problem and need more time. Please ask as I will work with you, but deliberate non payers and non communicators will be reported. I welcome ALL INTERNATIONAL buyers but please be aware of a couple things.I usually ship Priority International,however insurance is not available with this service nor is tracking once it leaves the United States. Also please be aware of your country's Duty Regulations as to what is allowable in your country and what the possible duty fees are as this is not covered in your purchase price.
3-way 2 1/2 x 2 1/2 Black edging Woodworking Adjustable C-Clamp Vise Holder Tool
3-way 2 1/2 x 2 1/2 Black edging Woodworking Adjustable C-Clamp Vise Holder Tool Korea 2pcs. Please see photos for additional condition details. TH02
WILTON 1206 Woodworking Under Bench Mount 6-1/2" Vise Powder Coated Red USA #523
WILTON 1206 Woodworking Under Bench Mount 6-1/2" Vise Powder Coated Red#523 Made in USA- I rebuilt this vise. It was missing parts and had it powder coated red its like new in condition smooth action-see pics for further details
Iron Champion Vise Geneva Ohio Woodworking Type Clamp On Work Bench
One older vintage clamp on vise. Vise is only wiped off and needs for cleaning. Opens to 2-1/4" right now due to the last inch or so of the screw has some rust and needs more cleaning. Then it will open to 3" Not damaged other than the little rust. thanks.
Vintage Record Woodworking Bench Vise No.V1765 Made in England
You are bidding on a Record Made in England woodworking bench vise. No. V175. 7 1/4" wide jaws, 2 7/8" deep and opens to 6 5/8" Nice used condition. Please see pictures and add $10.65 for shipping.
OLD VINTAGE COLUMBIAN WOODWORKING VISE 10" JAWS QUICK RELEASE
Fresh find from a Southern Maryland Boat Builders Estate is this Older Vintage Columbian Woodworking Vise Pure heavy duty tipping the scale at over 30 pounds This one looks like it was mounted and then forgotten for years. Check the pictures and you can see that its still sporting over 90% of its original finish. Some flash rust showed up in the last couple of days that should just wipe off 10” jaws with the handy slide up dog for bench work Be sure to check back as we're always listing new cool stuff and don't forget to check out all the other really great stuff we have listed cause we really love to combine shipping Add us to your favorite sellers list and sign up for our newsletter for new listings and great deals and sales Normal 0 false false false EN-US X-NONE X-NONE
Vintage Woodworking Tools: Large Vise,Planer, Saws,Old Pulley System Large Lot
Vintage Woodworking Tools: Large Vise.Planer, Saws,Old Pulley System Large Lot comes with everything shown. Pulley system working order, vise working order, planer has blade missing good size lot.
COLUMBIAN WOODWORKING BENCH VISE LIGHT DUTY NO. 176
Columbian Light Duty Woodcraft Vise in very good condition. Made by the Warren Tool Group in Ohio. The guide bars and turning handle have some surface rust and there are a few nicks in the red paint. Specs: Item# 33176/ Cat# 176• 6 1/2" Jaw Width• 4 1/2" Jaw Opening• Jaws Drilled for Attaching Wood Faces• Double Steel Guide Bars• Portable and Compact
L1822- Lot of Vintage Antique Woodworking Tools- Plane, Brace, Saw Vise, Etc.
You’re bidding on a Lot of Antique Woodworking Tools- Thanks for looking and good luck. Pennsylvania Residents or local pickup will be charged 6% sales tax on the final price. We do combine shipping on certain items. However often large or heavy items(such as lots of tools. Hardware, Etc. will have to be shipped individually. For most lots will typically us priority flat rate boxes. Google Us: Kettering Enterprises Check out my! Be sure to add me to your! WE ONLY SHIP USPS/Fed Ex. License Plate Disclaimer: Most of our license plates come from estate sales or home cleanouts.It is up to you the buyer to find out if the plate can be registered to be used on a Pennsylvania Vehicle. Please do this before bidding or purchasing a plate you wish to use. Returns will not be honored for plates that cannot be registered because the number is already ... moreregistered to a vanity plate. RETURNS AND REFUNDS Refunds will be for the original price paid. Purchased items must be returned within(14) days after you receive your item. Item must be shipped back to me unless we work out another solution. Buyer is responsible for return shipping. The returned items must be in the exact condition of which it was received with all original attachments and original packaging materials. If your purchased items are received in unsatisfactory condition. We will work with the buyer to achieve a satisfactory result. No returns for a change of mind in purchase decision. Insured items must be returned for us to make claim and you must wait for claim to be paid could take a few weeks depending on post office. Items described and pictured to the best of our ability but can't be perfect.
VINTAGE CRAFTSMAN MADE IN USA WOODWORKING BENCH MOUNT VISE VICE 5246
UP FOR AUCTION IS A VINTAGE.CRAFTSMAN, MADE IN USA, WOODWORKING BENCH MOUNT,VISE, VICE,NO 5246, ALSO MARKED 20 5246-2. THANKS FOR LOOKING AND PLEASE CHECK OUTMY OTHER AUCTIONS FOR MORE GREAT ITEMS,
2 Vintage Woodworking Clamps and Vise All Wood from estate sale
Pair of Vintage 2 Jaw Woodworking Clamps and a Woodworking Vise were purchased at a local estate sale- they are All Wood and are in good working condition- the pair of 2 jaw clamps are stamped: G. Kaiser No. 12. The jaws are 10" long, all the screws turn easily, one of the clamps has some splits and a small bit of the thread is missing near the tip, the other clamp is in better shape, part of one of the handles has been cut off- the jaws of the wood vise measure 10" x 3 1/2" one side has holes for mounting. it is marked: EMIR Ashford England- buyer to pay shipping cost- purchase price refunded if item is returned within 14 days- thanks for looking!
Antique 1886 Cast Iron Clamp Bench Vise Tool Sharpening Blacksmith Woodworking
Antique. Vintage, cast iron, hand saw vise is marked"PAT' D March 30,86" The thumbscrew on the bottom can be tightened onto a table. It is very heavy with some surface rust but still in working condition. Still has some of the original black paint on metal. The jaw that holds the blade is 9 1/2" long and has a 1/4" opening. The item is 10" tall not counting the thumbscrew for the table top.
MILL CRAFT Cast Iron MITER VISE - Picture Frame, Woodworking Clamp - MILLCRAFT
MITER VISE- PLEASE SCROLL DOWN TO SEE PHOTOS- Cast iron miter vise in good used condition. Simply marked: MILL CRAFT. Also has a small stamped number 2340- serial number? Base measures slightly over 12 inches in diameter. Weighs 35 pounds. Possibly 40 pounds packed. Will clamp stock up to 4 1/2 inches wide. Clamping blocks are 3 1/2 inches wide and 5/16 inch tall. Lowering the outside arm(egg-shaped handle) causes the clamp block to push forward. Securely clamping the stock in place. Pins provide positive stops to cut pieces for 3. 4, 5, 6, 8, and 12-sided frames. I found this caked with sawdust. Sitting on the table of a derelict radial arm saw. There is a 3/4" strip of wood screwed to the base that probably has something to do with mounting the vise to a saw. Wood will be removed for shipping. I know nothing about this tool. Assuming ... moreit is for picture frame construction and guessing it works with a radial-arm saw. But there may be other applications. I cleaned off the sawdust and most of the dirt. The unpainted metal surfaces have thin rusty"patina" where the metal was exposed. Clean and shiny where it was protected(see photos below) Heaviest rust is 2 spots, 1" and 1 1/4" that look like water-drops, on the left swinging assembly. The left fixed clamp block has a 1" errant saw cut. The left egg-shaped handle is chipped at the base where the arm screws into the plastic(bakelite? There are four flat-head screws for attaching additional stops(or something? and a threaded hole in each of the floating clamp blocks. I don't know their purpose and this comes with no extra parts. Everything moves smoothly. Feels like a solid and precise tool. Ready to use! Please check my other auctions for more good vintage tools- I will combine packaging to conserve shipping costs. C are ful packing and fast shipping(probably via UPS) to the lower 48 states for 20 bucks. AK& HI would be more, international delivery would be very costly. SATISFACTION GUARANTEED! I do not end auctions early. Most o
Columbian Vise & MFG. Co. 7" Jaws Vintage Woodworking Vise Clamp
Columbian Vise& MFG. Co. 7" Jaws Vintage Woodworking Vise Clamp A well made tool from Cleveland. Ohio Great Vintage condition. A heavy and strong American made Vise that was on a Connecticut Master Carpenters bench for many years. It wall last many more years! 7" Wide jaws 15" in length Normal 0 false false false EN-US JA X-NONE This Vise has the handy slide up dog for bench wor k!
Vintage Abernathy 80 Woodworking Vise Roller Nut Under Bench Table 10" Jaw
Vintage Abernathy 80 Woodworking Under Table Vise T his is a used vise ready to go in the workshop. Or could use some TLC/restoration to clean up the finish and be repainted. The logo is hard to read from layers of paint. There are some paint drips on the jaw. Measures about 21" long. Jaw width is 10" Depth is about 4" Weight about 30 lbs. Will be packed very well and safe for delivery. I can ship out most items the same day if Paypal payment is received before 4PM EST on weekdays! Ships to PayPal verified addresses only from NY. USA. Thank you.
vintage WILTON L shaped woodworking vise universal vert/hor capacity 7" old tool
Here is a nice old heavy duty woodworking vise marked Wilton. The tool has 7" wide jaws that open about 9" The jaws are what some call L shaped and allow for both horizontal clamping and also vertical. Can be mounted at either end of the bench. Has dual slide bars and is pre drilled for wood faces if desired. Has lots of original paint and only minor signs of being used. A good quality old Made In USA tool for the serious craftsman. Please look at the pictures and ask any questions before you bid. Thanks
Vintage Huther Bros Saw Co Rochester 25lb Woodworking Clamp Vise ?? Rochester NY
Here is a super nice Vintage Huther Bros Co High Quality some kind of Woodworking Template? Clamp? Vise? with adjustable cone apparatus made by the Huther Bros of Rochester NY- any info will be greatly appreciated. The vintage? measures 23" by 6" By 6" tall, is over 24lbs, will be shipped in the original wooden crate that it was sent from the factory, is sold as pictured, and looks to be in used, excellent condition, and would be a super addition to your collection! Thanks for looking! Gary.
PONY VISE WOODWORKING USED #26545 BENCH VISE
USED GOOD CONDITION#26545 PONY BENCH VISE. 6 3/4" X 3 1/2" Powered by The free listing tool. List your items fast and easy and manage your active items.
Vintage Sheldon combination woodworking metal working bench vise excellent
An interesting vintage combination vise with two rotating sets of jaws. 7" and 4" for working with wood and metal at the same bench. It’s in excellent condition. There is a little paint loss, and some light surface darkening where the grease was rubbed off, but this looks like shelf wear and the vise appears to have been unused. Please ask any questions prior to entering a bid. I will combine multiple purchases to save on shipping. Customers in MA to include 6.25% sales tax.
Zyliss Portable Aluminum Vise Woodworking Clamp System Swiss Made Glue Vice
Used Zyliss all-purpose bench vise with some attachments The vise measures 19 ½ inches from end to end jaws stand 5-1/4 inches above the rail. 4 3/8" wide and open 8 ½” It is made of solid. High-quality cast aluminum. Made in Switzerland. Weight: 8 Lb. 3 Oz. No previous owner markings Please check the pictures. E-mail questions please.
Vintage Antique Woodworking bench leg end vise acme screw
End Vise Acme Thread screw 16" total length. 1-1/4" thread diameter Very good condition. Threads and castings are in very good condition. Turns smoothly. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14beebaeea8-0xf8-
Vintage Stanley No.700 Woodworking Corner Vise 5" Jaws Opens to Approx 4"
Vintage Stanley No.700 Woodworking Corner Vise 5" Jaws Opens to Approx 4" Made in USA. Needs Jaw Inserts. For more of my items please Please feel free to ask any questions. We are willing to COMBINE MOST SHIPMENTS but please be sure to message us before checking out!
Vtg -Craftsman-Clamp Portable - 3"- Woodworking Aluminum Bench Vise
Vintage Craftsman-90 degree right angle clamp Portable- 3" woodworking bench vise made of aluminum. Made in U S A. See all photos for detail condition and description. weighs 1 3/4 lbs. unpackaged. Questions are welcome.
VINTAGE RICHARDS WILCOX QUICK RELEASE WOODWORKING VISE BENCH MOUNT
Today I have a very nice useable vise made by Richards Wilcox. I had mounted on my bench. Very handy and works perfectly. It's all original except for the hard maple blocks screwed to jaws. It opens to 9-11/16" without wood and 8-7/16" with the wood. It is a quick release, just turn handle to left a little and slide jaws open. There are no repairs, cracks or breaks, just a bit of light surface rust on slides, the screw works great. A must for any wood worker. It weighs close to 30 pounds. Thanks for looking. Have a nice day.
6" Woodworking Bench Vise Antique from Japan
Great old 6" Vise for mounting to your workbench. Cast iron with wood inserts and stamped"Japan" on the back. No maker's name. Works great but I bought a new one so this has to go. Better quality than a new Chinese one that you will buy today. Wood blocks are 2"x6" Cast plates are 3"x6"
MADE IN USA!...WILL-BURT VERSA-VISE GUNSMITH WOODWORKING JEWELRY VISE TOOL
MADE IN USA!WILL-BURT VERSA-VISE GUNSMITH WOODWORKING JEWELRY VISE TOOL Shipping is $12.50 in the lower 48 states.
Vintage Sheldon Quick Release carpenters Woodworking bench Vise nice user tool
for auction a vintage Quick release woodworking under mount carpenters bench vise. The jaws are 7 1/4' long and 3' tall. The maximum opening capacity is 8' without wood work protector blocks) With the protector blocks in place. Maximum capacity is 6 1/2' + depending on thickness of blocks. see pictures 6& 10) The vise is in good used condition. the jaws open close well, and lock in place fine. the quick release teeth show minor wear, but they have not been abused. The vise is as found and will need a minor cleaning. It should have a little grease on the teeth as well. Please see pictures for condition. ask questions before you bid. Buyer pays shipping with delivery confirmation usps parcel post mail. thanks for looking. Vise weighs just about 20 pounds as pictured.
VINTAGE SMALL CLAMP ON VISE -- Jewelry / Engraving / Woodworking
VINTAGE SMALL CLAMP ON VISE- Jewelry/ Engraving/ Woodworking. Check pics for details. Good working condition. Shows normal wear. Minor surface corrosion. All parts move freely. Cleaned and oiled. Check other auctions for similar vintage antique pieces. I will combine shipping. Buyer pays shipping. Check out my other items! Be sure to add me to your favorites list!
Woodworking Bench Vise with Front Jaws and Handle Belco
Nice 6" vise Attaches to under side of edge Of Bench Belco brand
2 PONY ADJUSTABLE ANGLE CORNER MITER PICTURE FRAME MAKING CLAMP VISE WOODWORKING
2 PONY ADJUSTABLE ANGLE CORNER MITER PICTURE FRAME MAKING CLAMP VISE WOODWORKING These 2 adjustable angle corner miter picture frame clamp vise are made by Pony No. 9166. They are lightly used and in good condition with some scratches. Thank you for looking. I have more antiques and collectibles listed. I would be happy to combine shipping when possible. Thanks for looking. I prefer PayPal. Item will be shipped next business day after receipt of payment. Shipping is normally done through the U.S. Postal Service.
Vintage Craftsman Woodworking 10" Undermount Bench Vise
This has been sitting for many years and will need to be cleaned and tuned up. Please look at the photos carefully as they are part of the condition description. Sold AS-IS. Thanks for looking!
Vintage Wilton Under Table Woodworking 7" Jaw Vise Carpentry
Vintage Wilton Under Table Woodworking Vise This is a used Wilton vise. It will need a cleaning and the threads will need some lubrication. They are a little stiff but the threads are good. 7" Jaw(wood plate extends to 8 1/4" Fully opened the width is about 8 1/2" Jaw depth is about 4" The number 161132-10 is stamped under the lip of one of the plates. I can ship out most items the same day if Paypal payment is received before 4PM EST on weekdays! Ships to PayPal verified addresses only from NY. USA. Thank you.
Antique Sheldon under bench quick release vise collectible woodworking tool
Estate find. Early Sheldon vise, 7" wide by 3" tall jaw, no breaks or cracks, needs clean up from long storage, over 23 pounds, AS IS AS SHOWN. Please see my other auctions for axes. Chainsaws, logging tools, collectible tools, mechanics, machinists, blacksmith, tinsmith, steampunk items, primitives, and more. We will be liquidating a large estate consisting of military items. Woodworking tools, automotive tools, machinists tools, mechanics tools, collectibles, antique and primitives and more. Please put us in your favorites you will not be disappointed. Please note. Unless noted as new, the items I am auctioning are old and/or used. Because of this, they are sold AS IS, as found, the same as in any other auction. I will try to describe these items to the best of my ability and would not misrepresent anything intentionally. I list ... morethe defects, problems and imperfections I see on the items, but I can sometimes miss something or make a mistake. I will admit that I am not an expert on everything I sell so please look at the pictures for condition and e-mail me with any questions before bidding. I try to answer every question asked, but cannot guarantee an answer if you ask the day the auction ends. All items are sold AS IS AS SHOWN. NO REFUNDS AND NO RETURNS. INTERNATIONAL BUYERS PLEASE E-MAIL FOR SHIPPING COST BEFORE BIDDING. PLEASE CHECK WITH YOUR COUNTRIES SHIPPING RESTRICTIONS BEFORE YOU BID. WE WILL NOT BE RESPONSIBLE IF ITEMS CANNOT BE LEGALLY SHIPPED TO YOU. ALSO PLEASE DO NOT ASK US TO SHOW AS A GIFT OR MISREPRESENT THE CONTENTS OR VALUE. WE WILL NOT! Please see the shipping calculator. E-bay is now charging fees on the shipping also, I normally ship via USPS or UPS. We have a handling/packaging charge of $6.00 included in our shipping charges(this is not your total shipping, you must see the shipping calculator or flat rate shipping in the item description)Our $6.00 covers packaging material and time and gas to get it to the Post Office or UPS office. PLEASE ASK SHIPPING QUESTIONS BEFORE THE AUCTI
WOODWORKING VISE BRODHEAD GARRETT CUSTOM VINTAGE CARPENTRY VISE
A NICE COMPLETE 8" VINTAGE VISE MADE IN THE USA NO RESERVE
WOODWORKING VISE RICHARDS WILCOX CARPENTRY VINTAGE TOOLS
A VERY NICE VINTAGE VISE 8" MAX OPENING. NO RESERVE
WILTON WOODWORKING VISE NUT -ONLY 2 LEFT
THESE ARE ORIGINAL WILTON PARTS FOR THE OLDER QUICK RELEASE WOODWORKING VISES. I DONT KNOW THE EXACT NAME FOR THESE. BUT IT'S WHAT CLAMPS ON TO THE THREADED SHAFT OF THE VISE WHEN YOU TIGHTEN IT. I WAS TOLD THE MODEL NUMBER OF THE VISE THAT THESE FIT IS A 64A WILTON RAPID RELEASE VICE. THESE ARE USED BUT APPEAR UNDAMAGED WITH ONLY LITTLE WEAR. THEY ARE NO LONGER AVAILABLE FROM WILTON. THE AUCTION IS FOR ONLY ONE OF THESE. THERE ARE ONLY 2 LEFT. FEEL FREE TO ASK ANY QUESTIONS.
Zyliss Woodworking Bench Vise/Clamp, Bar Clamp, Multi Use, Swiss Made, Complete
Very nice Zyliss multi-use clamping tool. Complete with the original box and instructions. Used. A little dirty, good working condition. Please see the photos for the wide range of uses for this amazingly versatile tool. Swiss made of what appears to be aluminum for lightweight ease of handling.
Vintage Columbian 7" Woodworking Vise #6CM2
Columbian vise under bench mount#6CM2. In good working order. It was painted green because the front jaw was rusty and I only had green paint. Screw and guides are rust free and operate smoothly. A nice vise. Good feedback gets you excellent feedback in return. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14c07641bf9-0x11c-
2 Vintage Craftsman Corner Clamps 9-6666 Woodworking Tool Vise
Up for auction is a great item from our closet. 2 Vintage Craftsman Corner Clamps 9-6666. These 2 are in solid shape and still useful. There is some light surface rusting to the clamp screws. But still very nice for an older set of tools. Thanks for looking and please check out our other great auctions. Check out my! Shipping can be combined on multiple purchases. Please wait for a combined invoice, I will send with the best shipping options. We do ship internationally. Please use Shipping tab on the auction page to get a shipping quote to your country. This is quicker than waiting for me to reply to your email. We ship priority mail or parcel select. Please choose what option works best for you. Remember, parcel select may be a cheaper choice, but it takes longer to receive your items. Please remember to leave positive feedback when you ... morereceive the item and we will be sure to leave positive feedback for you as well. All items are sold as is. Unless an item has been grossly misrepresented.
Moxon Vise From Tools For Working Wood Woodworking Dovetailing
I purchased this Moxon vise a while ago and have not used it yet. The vise comes complete and exactly as shown in pictures. I took a few pictures with the tape next to it so you can see the basic dimensions. Made in the USA of hard maple. These run 205.00 plus shipping from tools for working wood. So save a little money and get free shipping. The vise is bare wood so you can choose to finish with oil or stain or whatever you would prefer. Great tool for someone who doesn't want to build one. It has two inch wings on the sides to clamp to your bench as well as an overhang on the top that you can clamp your workpiece to. It has camber on the moving jaw to allow for an ultra tight grip. Please use the pictures as the best description. Thanks for looking.
COLUMBIAN 10" Woodworking Vise heavy duty Vtg workbench under bench carpentry
For your consideration is a vintage Columbian. Under mount vise. It is in decent condition, the jaws are 10" wide and it opens to just over 12" This vise works great and has a quick open feature! It is a bit rusty in places but it works just fine, built to last in the USA! If you have any questions please ask, and thanks for looking! I ship almost every day. If you need it quickly I can even ship overnight! I will ship internationally, even if my listing doesn't show it. Please ask for a quote. TERMS AND CONDITIONS: I do accept payment via mail. PLEASE ASK! I generally ship everything priority. All international orders are sent Priority USPS. For international buyers. Please contact me for a shipping quote, I ship to most countries! All items are sold as is. If you are unsatisfied with an item. Contact me BEFORE YOU LEAVE FEEDBACK, ... moreand I will work it out with you. I will not ship until your payment clears. Please don't bid if you do not intend to pay. I will not lower prices on international customs forms. We strive to provide the best customer service. If you have any questions before or after the sale please contact us. Thank you. Your business is appreciated!
Vintage Wilton 9-64 Woodworking/Patternmakers Vise, 10" Jaws!
Up for sale is a very nice Wilton woodworking vise in great. Original condition. Everything from the wooden jaws, handle bumpers and mint green paint is all original. I can't say 100% because I did replace the stop on the threaded operating shaft. It was missing when found so I made a new one and installed a new dowel pin. This prevents the vise from falling out of the stationary jaw when the quick release function is used. It has seen some use but still looks great for its age. The wooden jaw pads have minor dings. Nicks and cuts but no cracks or serious damage. The metal castings are sound and show no signs of stress or damage/repairs. I opted to keep it original so nothing was done other then wipe it off and service the quick release mechanism. It has been lightly oiled along with the 2 guide bars so it opens and closes smoothly The ... morejaws measure 10" and have a throat depth of 4 1/2" It opens approx 11 1/2" but another half inch could be squeezed out of it if needed I would say it weighs approx 35lbs
Hartford Clamp 4G Quick Acting Deep Engagement Woodworking Clamp Furniture Vise
A masterful stroke of gizmology. Opens to a full 8" and 4" deep. Extra clean and near perfect condition. Advertised in Hartford Clamps mid century catalogue as The"4G Quick Acting Deep Engagement Clamp. Quick Adjust, Self Locking and Unlocking" Clean and in near perfect condition as shown. I have more Hartford Clamps coming up in other listings including a rare 3gu Universal furniture clamp.
3 piece set of 6 inch Wooden Furniture Woodworking Clamps Vise
Estate Find: We got a storage unit of a man who was a collector of woodworking tools. Knives, and various other items. All items are being sold as is and as found since I am no expert on all these things and do not want to ruin the value or functionality of the piece by trying to clean them. Please see the pictures as they are part of the description. This is a huge lot so we will be adding things every week. Thanks for you interest! This auction is for 3 piece set of wooden clamps approx. 2 inches thick and 6inches long. One is made by Jorgensen others are unmarked. some surface stains present.