|
Delta Rockwell Unisaw Dado & Standard Throat Plate/Inserts, Lot Of 4
Used lot of dado and standard throat plate inserts for a Delta Rockwell Unisaw. 3 3/4" x 13 3/8" Good used condition. See pics for details. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please.
|
|
|
DELTA, Unisaw arbor raise/tilt lock wedge(s) and lock pin
Used TS-191 From 1948 UNISAW. pn LTA-458 arbor position locking Wedges(2) with lock pin LTA-457- length 1.00" width tapers from 27/64 to 1/4" thickness 3/32" Pin 3/8 dia. length 2 9/32" Con dition: Ready to work as is. Questions? contact me and I will answer as best I can. Payment must be made within 5 business days. Happy to combine shipments Buyer pick up always OK
|
|
|
DELTA Unisaw, Blade position control rod worm gear
Used TS-191 From 1948 DELTA Unisaw. Steel worm gear from either the blade raise/lower shaft and/or the blade tilt shaft. Comes with both pn LTA-419& LTA-418 control shafts Drive pin included Con dition: Ready to install. See photo for small dings Questions? contact me and I will answer as best I can. Payment must be made within 5 business days. Happy to combine shipments Buyer pick up always OK.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-1490a923506-0x113-
|
|
|
DELTA ROCKWELL FENCE RAIL BOLT & SPACER Jr. UNISAW 34-260 & 10" MODEL 34-425
SPECIAL RIP FENCE RAIL BOLT AND SPACER FOR VINTAGE 8" JUNIOR UNISAW MODEL 34-260. WILL ALSO FIT 10" CONTRACTORS SAW MODEL NUMBER 34-425 AND OTHERS WITH 1 1/8" RAILS. PARTS ARE IN GOOD CONDITION WITH NO BREAKS. CRACKS OR REPAIRS.
|
|
|
Rockwell 10" Unisaw with 52" Unifence and HTC Mobil Machine Base
Very good condition. Motor needs repair. Need to pick up self in Sterling Heights Michigan. Base and unifence included.
|
|
|
Authentic Original Rockwell Unisaw 10" Table Saw Manual Woodworking
ROCKWELL UNISAW 10" TABLE SAW MANUAL This listing is for one original Rockwell instruction manual. Ten pages. Describes the assembly. Operation, and maintenance of their 10" table saw. Circa 1963. This paperwork came from a working machinery dealer and has hole punches. Mild wrinkles, and is lightly soiled. Please see photos for exact condition. Shipped lettermail anywhere in Canada and the USA for $10. Between two pieces of archival grade magazine board in a 9x12 envelope marked"Do Not Fold" I will ship promptly. But the item is in Canada and may take up to six weeks for delivery. I do not have time to respond to impatient buyers because of the slowness of the postal system. If your item takes longer than six weeks to arrive I will definitely work with you to resolve the issue but until that time I will not respond. Item ... moreis insured for full purchase price less shipping. Sorry, no tracking number is available. No returns/refunds. I WILL COMBINE SHIPPING FOR UP TO FIVE ITEMS. I will also. Upon request, hold your shipment by up to a week to allow you to fill your order. In every five item package I send out I'll add a bonus item. I have a large collection of vintage wood and metal working catalogs and manuals from all the major manufacturers that I will be listing in the future. Please see my other auctions and keep checking back for more items like this.
|
|
|
Vintage Delta Unisaw Motor mounting pin
For sale is a motor mounting pin with clips for a Delta Unisaw.
|
|
|
Vintage Cutler Hammer Switch, Delta Rockwell, Unisaw, Drill Press, Band Saw, Etc
Used CH switch for Delta Rockwell or other vintage machinery. Good condition. See all pics for details. Includes what is in the pics. Check my other listings for more parts. I'm parting out many Delta Rockwell machines. I will combine shipping. Paypal please.
|
|
|
Delta Rockwell Unisaw Table Saw Top LTA-401
Delta Rockwell Unisaw table saw top. 27" by 20" Part LTA-401 Good condition. See pics for details. Could be used as a extension.
|
|
|
Delta Wood Table Saw Model 34-802 Tilting Arbor Unisaw 10" Blade Nice
You are bidding on: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Delta Wood Table Saw Model 34-802 Tilting Arbor Unisaw 10" Blade Nice Very Clean Machine Any question please call: 818-441-8941 Please see pictures for additional details. I guarantee my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in the same condition you received it for a full refund. You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 8.00% sales tax is applied to all orders shipped to California I really appreciate your bids.
|
|
|
Delta Unisaw 5 HP 3 Phase 220 Volt
2000 Delta Unisaw 5 HP 3 Phase comes with 50 Inch Beismeyer fence and roll around base. This saw is in excellent condition! If you have any questions or would like to inspect the saw call 916-439-3298.
|
|
|
Vintage Delta Unisaw Switch Plate and Cover Mount Plate
Vintage Delta Unisaw Switch Plate and Cover Mount Plate This vintage Delta Switch Plate and Mount Plate came from a 1945 Delta Unisaw. The Mount Plate is fastened over the switch cutout hole to enable you to mount a Magnetic Motor Starter. The mounting screws are included. The Switch Plate has some discoloration and some scratches. This is in good condition. This is sold As-Is
|
|
|
Delta 10" Unisaw Table Saw With A Beismeyer Fence. 220 Volt Good Condition
10" Delta Unisaw table saw with a beismeyer fence and additional side table. Tilting arbor. Model 34-761. Serial no. 83D0001S. The saw is in good working condition but runs on 220 volts. It has extra blade inserts for the table and push sticks(2) The saw was our Dad's who was 94. It got very little use from him. The saw was moved with his other tools to a storage area and is shown at the storage area in the later 5 pics. The 4 beginning picks are taken in his basement when the saw was together. The tenoning jig shown in the first pick is not included with the saw as it has been sold. This is being sold as a local pickup only and due to health problems. I can not help to load so it will take at least two men to load the saw. The screws and nuts to attach the fence were misplaced by the movers and will need to be replaced. They are ... morejust like a 5/16" countersunk flat head bolt with a lock washer and nut. I believe there were(4) at 1" long and(4) at 1 1/2" long. Any questions. Please ask and I will try to answer. Thanks for looking. Payment by Pay Pal only- Payment requested before pick up and within 48 hours of auctions end. Local pick up only
|
|
|
Delta 34-457 10" Unisaw, 230 V, Single Phase
ID# O-1-100 230 V. Single Phase 10" Saw 27.5 x 28" table size Fence/Guard Rail Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items not ... morepaid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost.
|
|
|
DELTA X5 LEFT TILT UNISAW 10" TABLE SAW 3 HP SINGLE PHASE 52" BIESEMEYER FENCE
DELTA X5 LEFT TILT UNISAW 10" TABLE SAW 3 HP SINGLE PHASE 52" BIESEMEYER FENCE THE SAW IS IN EXCELLENT CONDITION CONDITION. THE BLADE IS SHARP AND THE BELTS ARE GOOD. PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE SAW. IT WILL SHIP VIA FREIGHT SO PLEASE EMAIL ME YOUR ZIP CODE AND IF IT IS GOING TO HOUSE OR BUSINESS AND IF YOU HAVE A FORKLIFT FOR UNLOADING AND I WILL GET YOU A QUOTE.
|
|
|
1937 DELTA UNISAW 1st year made TABLE SAW
A 1937 DELTA UNISAW 1st year made.10" TABLE SAW IS A HEAVY DUTY SAW IN GOOD WORKING CONDITION. I can ship for $1.50 a loaded mile calculated by MapQuest directions up to 300 miles. This is drop shipped.
|
|
|
Delta 10" Right Tilt Unisaw with Vacuum System
The Delta 10" Right Tilt Cabinet Saw comes with the 52 inch Biesemeyer Table and Fence. The saw was used in my home shop for several years and provided good service. Include is the Delta Dust Collector Model number 50-850 currently wired for 220V. I have several accessories such as the mobile base. Delta tenoning jig, dado blades and inserts that are included. This product is too big to ship, pickup is required.
|
|
|
3 HP Delta Rockwell UNISAW Motor 3 Phase (Single Phase option), 230v, 3450rpm
Delta Rockwell Unisaw motor#87-359 Good used 3 HP motor from a Delta Rockwell Unisaw. 3/4" shaft is in good shape. Motor has been tested and works fine. The following is a list of the name plate specs. Specs Delta# 87-359 3 Horse power 3450 RPM 3 Phase 7.4 amps@ 230 Volts 3/4" shaft diameter If you need single phase. I can throw in a static phase convertor for an addition $75.
|
|
|
Delta Unisaw 3 phase NO. 86-656 Table Saw Motor 5 HP! Great Item
Delta unisaw 3 phase motor email me with questions!
|
|
|
VINTAGE DELTA MILWAUKEE AUTO SET MITER GAUGE GAGE TABLE SAW UNISAW BAND
DESCRIPTION: USED. AUTO SET MITER GAUGE. THE BAR IS 3/4 3/8. NO CRACKS OR REPAIRS. ONE OF THE POSITIVE STOP SCREWS IS MISSING(PIC4) CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT ... moreFOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMAT
|
|
|
Delta Rockwell Unisaw Motor Pulley with keyway and screws
Used motor pulley from a Delta Rockwell Unisaw. 3 9/16" diameter 3/4" bore. Good condition. See pics for more details. Includes KEYWAY and SCREWS.
|
|
|
Vintage Cutler Hammer Start Stop Rocker Switch Black Art Deco Unisaw Lathe DP
Vintage Cutler Hammer rocker start stop switch. Black Art Deco styling of the thirties. Two pole often found on vintage machinery such as drill press. Lathe, scroll saw band saw and others. A classic in good working condition.
|
|
|
Vintage Cutler Hammer Start Stop Pushbutton Switch Art Deco Unisaw Lathe DP
Vintage Cutler Hammer pushbutton start stop switch. Two pole often found on vintage machinery such as drill press. Lathe, scroll saw band saw and others. A classic in good working condition.
|
|
|
Delta / Rockwell 10 " Unisaw Cabinet - with plates - Model # 34-466
Delta Rockwell Unisaw Cabinet with Base Model 34-466 In great condition. See pictures for details. Brand. Serial, and tilt gauge plates included. All three in great condition. Dust collection ready.
|
|
|
Rockwell Delta Unisaw w, Attachments LOOK !
Rockwell Delta Unisaw w. Attachments, Delta Model 34-555( table extensions, Delta unifence,Delta sliding table) 480 V,3PH, PayPal payment due at end of sell, all sells final, not tested sold in as is where is condition, Buyer makes all arrangements and pays for all shipping costs.Good Luck!
|
|
|
Vintage Rockwell Delta Unisaw Goose egg Motor Cover
Normal 0 false false false MicrosoftInternetExplorer4 Vintage Original Genuine Rockwell Delta Unisaw Cast Iron Goose egg Motor Cover. Original Paint. No cracks or visible defects. Does not include mounting bolts.
|
|
|
Powermatic Unisaw Table Saw 65 w/ 3 HP Motor
Powermatic Unisaw Table Saw 65 w/ 3 HP Motor THIS TABLE SAW IS USED. BUT APPEARS TO BE IN FAIR CONDITION. IT HAS NOT BEEN TESTED AT OUR FACILITY, BUT IT IS GUARANTEED NOT TO BE DOA. THE GUARD IS DAMAGED(SLIGHTLY CRACKED, BUT INTACT) AS SHOWN. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS. EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR FURTHER DESCRIPTION AND OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: OVERALL DIMENSIONS: WIDTH: 40" LENGTH: 79" HEIGHT: 42" SHIPPING WEIGHT: 415 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP VIA FREIGHT GROUND TO ALL UNITED STATES.CANADA, AND MEXICO. WE ALSO ... moreALLOW LOCAL PICK UP AT OUR FACILITY. INTERNATIONAL BUYERS PLEASE CONTACT US FOR A QUOTE. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASH
|
|
|
Hitachi B600A Resaw Bandsaw w/ Unisaw Motor
Hitachi B600A Resaw Bandsaw w/ Unisaw Motor for sale. Great condition. Everything on the unit works perfectly. Rigged for 220. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-149865eddf7-0x10d-
|
|
|
Delta Rockwell Uniguard arm for Unisaw
Rockwell Arm for a Uniguard. Nice condition.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14992515323-0x102-
|
|
|
delta rockwell unisaw or shaper locks
this is a mint pair of crank locks for a delta unisaw or shaper
|
|
|
DELTA ROCKWELL MILWAUKEE LTA-444 CAST SWITCH BOX USED ON UNISAW & CAST BASES
DESCRIPTION: USED. CAST SWITCH BOX FOR MANY DELTA MACHINES. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED USING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ... moreALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPANY SPECIALIZING IN VINTAGE PORTER CABLE. DELTA, POWERMATIC, ATLAS AND WALKER TURNER TOOLS. I ALSO BUY AND
|
|
|
POWERMATIC 10" TILTING ARBOR UNISAW, MODEL 66 WITH EASY STOP AND FENCE
Our Product Categories: Buildings Computers/Electronics Facilities/Maintenance Food Service Furnishings Industrial Equipment Lighting Motor Vehicles/Trailers Musical Equipment Printing/Graphics Shop Equipment/Tools Sporting Goods Miscellaneous Item Location: Clara City. MN Inspection Dates: N/A Pick-Up Dates: To Be Arranged POWERMATIC 10" TILTING ARBOR UNISAW WITH BIESMEYER FENCE DESCRIPTION You are bidding on a POWERMATIC 10" Tilting Arbor Unisaw. Model 66. The saw includes a Biesmeyer fence. Measuring guide, Easy Stop button, elevated guard and extension table. 230/460 V, 3 Phase. It is in good condition. DIMENSIONS Table is 25" x 28" x 33"H. Extension table is 43" x 28" CONDITION This item is used and shows signs of wear consistent with use. It was fully functional at last use. PRODUCT IS LOCATED IN CLARA ... moreCITY. MN. LOCAL PICK UP ONLY. ADDITIONAL PHOTOS(CLICK TO ENLARGE) This item is located in CLARA CITY. MN. LOCAL PICKUP ONLY. N/A. This product is easily accessible but is HEAVY. Buyer is responsible for all equipment. Tools, personnel and transportation needed for loading and removal of the product as there is very Limited equipment on-site. This item is scheduled for pickup on an Arranged Date. Monday through Friday, from 9:00 AM- 3:00 PM ONLY. In order to confirm pickup on one of the dates listed. Payment must be received at least one(1) business day prior to pickup unless other arrangements have been made in advance by contacting MidwestRMG directly. Pickup information will not be provided until payment has been made. We will not be able to assist in loading or transporting auction items. So please note all pickup information specific to your item in the listing and come prepared. Failure to pickup your item on the specified date will result in a $25 storage fee, assessed daily and/or forfeiture of your item. We cannot guarantee that your item will be held beyond the pickup date or that another pickup date can be arranged. Please contact us if you are having issues with p
|
|
|
Rockwell Unisaw 10" Model 4-461 3 Hp 3 Phase/ 3 Hp Single Phase Delta Unisaw
This is a nice heavy Rockwell table saw. It was used in a manufacturing environment. The saw comes with a new miter gauge. 3 table inserts(one is new) guard mounting bracket(no guard) rip fence, and a 3hp single phase motor(new in box) The saw currently has a 3 phase motor installed and we have no way of testing.
|
|
|
Stock Feeder 4 Table Saw / Jointer Feed Lobo Unisaw Powermatic Grizzly Delta Jet
Lobo 3 wheel 1/4 HP 1 phase 115v stock feeder for use on table saw or jointer. Plugged it in and when I turned it on it moved in both directions as it should. Actual item is pictured! Item is used and may show signs of previous use and may be dusty. Dirty, etc. This item may be shipped in multiple packages if one arrives and not everything is present. Please be patient and wait for the rest to arrive.
|
|
|
Rockwell Delta Unisaw Cast Iron Base (plinth) Part# LSR49
This auction is for the Delta Rockwell Milwaukee Unisaw cast iron base shown below. Part# LSR49 No chips. Cracks, breaks, or other damage.
|
|
|
Vintage DeltaVintage Jet Lock Fence Assembly for Unisaw or Contractor's Saw
Vintage DeltaVintage Jet Lock Fence Assembly for Unisaw or Contractor's Saw, Click to View Image Album Click to View Image Album Click to View Image Album Complete fence assembly. Missing one part, for Unisaw, etc. The little coil spring that holds the pinion shaft disengaged is missing. Aside from that minor defect the fence is in very good to excellent condition. Designed for the round rail Delta fence system. We also have Unifences& Biesemeyers. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers ... morea much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed
|
|
|
Delta 10" Unisaw, 3 HP, 1 Phase 230V Unifence Left Tilt
Delta Unisaw(Left Tilt) 10" Blade Capacity. 3 HP 1 Phase Motor 230V. Unifence with 52" rip capacity. New Table Boards. Included is mobile base. Miter gauge, 3 shop made blade inserts, 1 Dewalt 8" stacking dado blade(not picture) I've used this saw for many years in my home shop. Based on the serial number it appears to have been manufactured in 1997. Other than a blade mark on the fence there is no known damage to the saw. The motor runs strong. The saw is for local pick-up only. Madison. CT. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-149cb086a2f-0x111-
|
|
|
DELTA Unisaw 10" Tilting Arbor Saw Model 34-807
Delta Unisaw 10" Tilting Arbor Saw Model 34-807 Right Tilt Dust Collector Included Very Clean Machine LOCAL PICKUP ONLY
|
|
|
Delta Rockwell Unisaw Front Trunnion Bracket Casting # LTA 403 Excellent Cond.
Vintage Delta Unisaw Front Trunnion Bracket in Excellent Condition. Casting# LTA-403 came from a 1945 Unisaw. It has been cleaned and wire wheeled. It is in Excellent Condition with no breaks or cracks. The machined surfaces are all rust free and smooth. See pictures for details.
|
|
|
General model 350 10" Table Saw same class as Unisaw, PM66
Very heavy duty industrial grade machine. This was one of the last cabinet saws manufactured in North America. One owner- still works as well as the day I brought it home in 2001. 220v/1phase 3hp Baldor motor Double sheaved drive system Cast iron table General T-Fence(Biesemeyer) rip fence 54" rip capacity Cast iron router table extension- router plate currently accepts a large Freud router. Tenon jig Dado set Moulding head with cutters Many saw blades including the combination blade that came with the machine. Rockler"All-Terrain" mobile base Crosscut sled There is no blade guard included with this machine. But one is still available from General.ca I removed the extension tables and rip rails for ease of transport(see the last photo) I have detailed instructions for re-assembly- it's very simple. I need to get this machine ... moreout of my garage. So I'm starting the bids at $1 with NO RESERVE. I'll help you load it on your truck or if you're not too far away. I'm open to negotiate for delivery myself. Holiday weekend coming up so plenty of time for pick-up/delivery!
|
|
|
DELTA UNISAW 10" TABLESAW 5 HP 3 PHASE 32" BIESEMEYER FENCE
DELTA UNISAW 10" TABLESAW 5 HP 3 PHASE DELTA UNISAW 10" TABLESAW 5 HP 3 PHASE THE SAW IS IN GREAT SHAPE IT HAS BEEN FULLY TESTED. THE MOTOR IS STRONG AND VIBRATION FREE. THE TOP IS SMOOTH(IT HAS SOME STAINING) THE RAISE AND TILT MOVE WITH EASE. IT COMES JUST HOW YOU SEE IT IN THE PICTURES. COMES WITH A 32" BIESEMEYER FENCE. YOU WILL NEED TO MAKE YOUR OWN FILLER TABLE FOR THE FENCE. WILL SHIP VIA FREIGHT SO PLEASE EMAIL ME YOUR ZIP CODE AND IF IT IS GOING TO A BUSINESS OR HOME AND IF YOU HAVE A FORKLIFT FOR UNLOADING.
|
|
|
3 HP MOTOR STARTER SWITCH-USE FOR YOUR UNISAW-CABINET SAW
3 HP MOTOR STARTER SWITCH-USE FOR YOUR UNISAW-CABINET SAW Use this switch fr your UNISAW or 10" Cabinet Saw. Took off motor. Comes as shown. Ships at 10 lbs. Please Email With Any Questions Before You Bid Or Order. We Try To Describe Each Item As Accurately As Possible. And Want The Bidder To Be Confident That The Item Is What They Want. Our Feedback Record Proves That We Are Trusted. We Treat Folks Right. We Usually Ship Whichever W ay It Will Be Most Affordable To You. If You Have Any Referrence Of Shipping That Differs From Our Method. Please S tate It In Advance. We Will Be Happy To Ship It Your Way. But Y ou Must Let Us Know In Advance! If You Are Close To Beaver Falls. In Western Pa 40 Miles North Of Pittsburgh And Close To Ohio And West Virginia) You Can Certainly Drop By And Pick Up Your Purchase During Our Store Hours. You Are ... moreInvited. Just Plan On Staying A While. It Is A* True Tool Experience* If You Have A Problem With The Transaction Or The Item Received Please Call Us Or Write Us! We Will Work It Out. There Is No Need To Make A Claim Or A Report Before You Contact Us. We Do Our Best To Make Every Transaction Go Smooth And Fast And To Your Satisfaction. But It You Have An Issue With Your Order. Please Contact Us And Not Ebay. We Will Work It Out. Thanks Unless Otherwise Stated All Gas Powered Tools And Machines Are Sold As-Is. If You Bid And Buy Something That Does Not Fit Your Needs. But Is Not Our Fault We Will Have To Charge A 10% Restocking Fee. Any Returned Item Must Be In The Same Condition As When You Received And In Salable Condition. If It Has Been Altered Or Marred Or Pulled Apart Return Privilege Is Voided. So Be Sure That The Item You Bid On Or Buy Is What You Need. Check Your Own Specs First. Saves Us All A Lot Of Hassle And Everyone Is Happy. And That'S How We Like It. Happy
|
|
|
DELTA UNISAW 10" TABLESAW 3 HP SINGLE PHASE 52" BIESEMEYER FENCE MOBILE BASE
DELTA UNISAW 10" TABLESAW 3 HP SINGLE PHASE 52" BIESEMEYER FENCE MOBILE BASE. THE SAW IS IN GOOD CONDITION. THE MOTOR IS STRONG AND VIBRATION FREE AND THE BLADE TILTS AND RAISES WITH EASE. PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE SAW. THE SAW WILL SHIP VIA FREIGHT SO PLEASE EMAIL ME YOUR ZIP CODE AND IF IT IS GOING TO A HOUSE OR BUSINESS AND IF YOU HAVE A FORKLIFT FOR UNLOADING AND I WILL GET YOU A QUOTE.
|
|
|
Delta Unisaw Sliding Table, Lower Mount W/ Bearing
Used lower mount and bearing from a Delta sliding table attachment. Good condition. See pics for details. Check my other listings for more parts. I will combine shipping. Paypal please. 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-149ef21d07d-0x113-
|
|
|
Delta Rockwell 10" Unisaw Table Saw. Perfect Working Order. Best Offer!
I really don't use this much anymore and could use the space for some other items. The motor works perfectly and is quiet for the power it has. The belts were changed new about 1 year ago. Both guilds slide and hold great. Over all this is a fantastic saw that is ready to work. I can deliver this for $1.75 a loaded mile. Up to 250 miles from 60174.
|
|
|
Delta Rockwell Unisaw "Junior" Table Saw, Tags
Used tags from a Delta Rockwell"Junior" Unisaw. Good used condition. See pics for details. Includes what is in the pics. Check my other listings for more parts. I will combine shipping. Paypal please.
|
|
|
Delta Rockwell Unisaw Table Saw Motor 1 1/2 HP Single Phase, 115/230 Volt.
Used Delta Rockwell Unisaw bullet motor. 1 1/2 HP single phase, 115/230 volt. 3450 RPM. Motor runs great. But is very weak on start up may need brushes or? s ee pics for details. 3/4" shaft. Includes what is in the pics. Weighs 75 Lbs! No shipping to PO boxes on overweight items, physical addresses only please. Paypal please.
|
|
|
Delta Unisaw (10inch) All original parts with Excellent Delta Bullett motor
For bid is a: An all original Delta Unisaw with 110/220 Bullett motor. Cosmetically refurbished Unisaw. Repainted cabinet and cast iron base. Also put in high end set of bearings in arbor. Motor is in excellent condition and is wired for normal 110 volt household current. This saw is plug and play and is ready to go. Fence is Uber smooth and glides back and forth by finger touch. I just refurbished. And then luckily found another all original Delta Unisaw from four years earlier in even better shape. Your saw is from 1953) I do not need two saws, although have contemplated keeping it. This saw cuts great and has plenty of power. Saw has original miter gauge. I am also listing separately a Perfect conditioned 6 inch all cast iron Delta deco jointer, and a perfect conditioned very early mint saw blade guard. Also, see my other listings as I ... moream posting some great tooling.
|
|
|
Vintage Delta rockwell Table saw Unisaw 1953 model good used condition look
for auction is a vintage Delta Unisaw work shop table saw. It is in completely as found untouched condition. There is a lite amounts of surface rust on the table top. There is lite amounts of surface rust on the body of the saw. There are areas of paint loss. Surface scratches, minor dents and dings from regular work shop environment situations. But there is no serious signs of abuse. The table top measures 27' deep x 36 1/8' long The T slot sliding cross cut square is an original Delta. The slide fence is an original delta. It is in good used condition. And the micro adjuster is working fine. The blade guard is original and in good used condition. The motor is a G E 3/4 horse power single phase. it is 115/ 230 volt motor It is set up for 220. I believe switching it back to 115 V is pretty easy task. It does run. I tested it before ... moreI removed it from the work shop. The serial numbers tell me this saw was manufactured in 1953. I check on a vintage machinery website and that is what i found out. There are no breaks in the cast iron foot base. There are no breaks or repairs. It is a Good user table saw. for some one who likes vintage machinery and knows the old unisaws are good tools and made well. PLEASE see pictures for condition. Please use the EBAY photo enlarger. Ask questions before you bid. Buyer this is a local pick up. If you need a freight company. My zip code is 60123; 40 miles west of Chicago. you can have them pick it up for you. Another avenue is you ship dot com. Thanks for your interest. don't hesitate to ask questions g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14a01c79a0f-0x109-
|
|
|
Delta 10" Inch Tilting Arbor Unisaw Table Saw 34-829 Instruction Manual Parts
You are looking at a vintage tool manual. The one you see is the one you get. All my manuals are in good shape; they may be folded twice to be put into an envelope for shipping via letter.
|
|
|
Delta UNISAW 3HP Motor (83-651); [Right Hand tilt]; 3/4" Shaft; 3450 RPM; 230V
Here is a fantastic 3HP electric motor for your Delta Unisaw. This motor has just recently been removed from service. And has been gone over completely, and cleaned spotlessly. It is a GENUINE DELTA motor, made by Baldor- not some imitation. It is ready for installation onto your saw. It is a Single Phase motor, 3 HP, 230 Volts, and uses 12.4 Amps of current. The motor shell is TEFC. It is rated for 3,475 RPM. Also comes with attached cable(no plug) Bid now to either replace your worn out motor, or upgrade your power to a full 3HP, single phase with this one.
|
|
|
Delta 10" Unisaw Arbor Assembly Model 36-L31X Original Factory Part
Factory original Delta 10" Unisaw Model 36-L31X arbor assembly including arbor. Inner flange, bearings, three groove"V" pulley with hardware, spacers, snap rings and adjusting ring nuts. Taken from a Left tilt model( the"L" in 36-L31X) The threads are right hand threads. This was a demonstrator saw with very little use. The pieces are used in excellent condition. Only parts that are shown in the photographs are included. The arbor threads, pulley and bearings are as new. Ask questions before bidding. If bidding from a country other than the US, please request a shipping quote. Please research to make sure that these are the parts that you need. I combine shipping when buyer requests in a timely manner. I ship by standard shipping or by USPS Flat Rate Box whichever is the least expensive for buyer. Size 6" X 3" ... moreX 3" and weighs 3 lbs. 10 oz. without a box.
|
|
|
Delta 10" Unisaw Table Saw X5 Series Misc. Parts
Delta 10" Unisaw table saw model 36-L31X with serial No. 06G16710 misc. parts. These pieces were removed from a demonstrator saw. Name plate"Delta X UNISAW" 422-04-137-0014 still has the protective plastic cover on it. Tilt scale# 422-40-132-0002 still has the protective plastic cover on it. Delta# 422-35-014-0002 fencing hanging brackets(1 pair painted black) holds the factory rip fence and is complete with attaching hardware. Ask questions before bidding. If bidding from a country other than the US. Please request a shipping quote. Tilt blade guard brackets#422-06-014-5009 is listed as#422-0-14-0019 in the parts diagram(I can not explain the difference between the parts id# and the stamped number) and#422-04-014-0018 is stamped#422-06-014-5916. Please do your research to make sure that these are the parts that you need. These ... moreparts are universal to almost all of the professional series Delta Unisaws. The name plate is the biggest item at 6" X 12" I ship by standard shipping in the US. Exact shipping will be calculated at close of bidding.
|
|
|
Rockwell Delta Unisaw Motor 3 PH 3 HP Baldor 3450 RPM
I am selling the motor from my Rockwell Delta 10" Unisaw. It was made by Baldor- 3 Horsepower 3 Phase. Buy it as a spare. These motors are priceless to replace. Of course, Made in USA.
|
|
|
DELTA 10" Unisaw Table Saw, #34-807 (325)
USED… DELTA TABLE SAW Type: 10" Unisaw, Model: 34-807, Serial Number: 92F36304, Year of Manufacture: 1992, Condition: Good, General Specifications: Blade Diameter: 10" Arbor Diameter: 5/8" Max. Depth of Cut: 3-1/8" Max. Depth of Cut@ 45 ˚: 2-1/8" Table Size: 36" x 27" Electrics: 1.5 HP; 115 Volts; Single Phase; Approximate Weight: 450 Lbs, Approximate Dimensions: 84" L x 43" W x 38" H, Equipped With: Mitre Gauge• Fence• One(1) 10" Carbide Tipped Blade PRICE: F.O.B. Odessa. Florida… $750.00(Plus any applicable taxes. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14a374a5886-0x113-
|
|
|
Delta Rockwell Unisaw Arbor Inner Flange
Good serviceable part. Inner threads are in great shape. Please check my other auctions for interesting items.
|
|
|
***Delta Unisaw [Right-Tilt] Arbor Assembly***
Here is a slightly-used Delta Unisaw[right-hand] arbor for your Delta tablesaw.This unit has just recently been removed from service. It has been cleaned. Wire-wheeled, inspected& measured(for runout) It is in perfect condition. Bid in confidence on this OEM assembly for your Delta Unisaw. This item comes with the hard-to-find left-hand-thread arbor nut and flange, too.
|
|
|
DELTA MILWAUKEE ROCKWELL LTA-402 CAST IRON EXTENSION WING UNISAW SHAPER (B)
CAST IRON EXTENSION WING FOR 10" DELTA ROCKWELL UNISAW OR HEAVY DUTY( HD) SHAPER. THE WING MEASURES 27" X 8" AND IS PART No. LTA-402. THERE IS NO PITTING. CRACKS OR REPAIRS BUT THE EDGES HAVE BEEN PAINTED BROWN. THIS HEAVY DUTY EXTENSION WING SHIPS FREE TO THE LOWER 48 STATES ONLY.
|
|
|
Delta 83-671 5 hp 1 phase right tilt unisaw motor 230 volt 5HP single phase
WarnerSales Warner See all my listings: WarnerSales Delta 83-671 5 hp 1 phase right tilt unisaw motor 230 volt 5HP single phase Offered is a USED Delta Unisaw Motor Model: 83-671 Description: 230 volt 20 amps 60 Hz. 1 phase 5 hp 3450 RPM 3/4" shaft This item is in good USED working condition. It has a crack in the plastic fan shroud. see photos) FREE SHIPPING TO THE LOWER 48 STATES Feel free to contact us with any questions you may have by scrolling to the bottom of the page and using the"ask a question" link. Please include the eBay item number in all of your communications. We will respond to you as soon as we can. Our office is not staffed to answer emails evenings and weekends. And your patience is appreciated. Payment: We accept PayPal only. Payment must be made within 5 days of purchase commitment. If payment is not received ... morewithin five days. An unpaid item case will be filed with eBay in order to recover our listing fees. Sales Tax: We are required to charge 6% sales tax for items sold to Iowa residents. Shipping: We provide free shipping to the U.S. lower 48 states ONLY. We ship ONLY to the confirmed address provided with Payment. Before you pay. Please check your PayPal address for accuracy. For Alaska/Hawaii/other U.S. territories and international orders. Buyer pays the additional shipping. Please email us through the"ask a question" link at the bottom of the page for shipping costs before bidding. All customs forms will be filled out accurately. International customers are responsible for all applicable import duties and fees. Local Pickup: Johnston. Iowa) Pickups are welcome. You may pay cash at that time. Please contact us to make arrangements. Return Policy: You may return an item(other than an as is item) within 14 days of delivery for a full refund of the purchase price following our receipt of the returned item in the same condition it was in when sold. We will pay return shipping costs if the reason for the ret
|
|
|
Delta Classic Unisaw, 10" 3HP 220V Single Phase
10" Delta"Great White" Classic Unisaw- Right Tilting Arbor Saw.Powerful 3 HP-1 PH Motor designed to be operated from a 220-240 volt power supply.Biesemeyer. T-Square Commercial saw fence system.Blade Speed: 4000 RPM, 5/8" diameter arbor.Table: Precision-ground cast iron. Width of saw plus White Right Extension Table= 72"T-Slots for miter gauge in both cast iron table& in additional White Outfeed Extension. Buyer responsible for dismantling the Unisaw, extensions, and removes for pick-up.The length of the White Outfeed Extension is 4 Ft. plus saw's ground cast iron table= 6 Ft. Outfeed overall length. This extension is 5 Ft. wide!Delta Unisaw was made in the USA! Factory Additional Items: Two(2) fence hangers, Miter gauge, Arbor wrenches, hinged cover over the electric motor. Contact Jay via Ebay email concerning ... moreany questions. For Sale Only In United States. Local-Pickup Only! Payment thru Pay Pal Only! Additional Note: A heavy-duty handcart will be available for moving! Please do bring along some tie-down straps" to strap saw to my hand cart!I only have small pcs. of rope for tie-downs. Easy access for loading!LOCAL PICK- UP ONLY, LOCAL PICK-UP ONLY, LOCAL PICK-UP ONLY
|
|
|
Delta four foot Unisaw 10"
Early Delta Unisaw. Four foot base. Serial Number F-105. 1 HP Three Phase Motor. Fence. Miter Gauge. Please contact me for information on shipping or delivery. I have many lathes. Mills, benches, carts and industrial metal and woodworking machines available. Let me know what you're looking for. Browse other items for sale at
|
|
|
Delta 36-R53L 10" Unisaw, 5 HP, 3 PH w/ Biesemeyer Fence and Overhead Guard
ID# O-1-103(w) S/N 04B64171 5 HP. 230/460 V, 3 Phase With Biesemeyer fence and overhead guard Email or call 1-800-793-4494 if interested in this machine. Many other new and used machines are stored in our warehouse and can be viewed. Shipping& Freight: Purchaser/Buyer/Winning Bidder pays all shipping/freight costs associated with getting this machine to your location if item is to be shipped and not picked up in person. DELIVERY: Varies upon warehouse workload and potentially the item. This item may be released immediately by the warehouse. But sometimes up to 7 business days are needed to prep and release said item. Subject to Prior Sale. This item may be withdrawn from sale at any time as it is listed on our website and in other advertising. PAYMENT TERMS: Full Payment or deposit required within 24 hours of order. NO EXCEPTIONS. Items ... morenot paid for or held via deposit after 7 days will immediately be reported to eBay as unpaid! Cash in person, M.O. Personal/Company Check or Visa/Mastercard/Discover accepted. Wisconsin Sales and Use tax of 5% required for all purchases by Wisconsin residents who do not have a tax ID or are not able to fill out an exemption claiming the machine for business/manufacturing use. Minimum $125.00 Crating Fee. If required. Used equipment is sold as is. Where is, unless otherwise specified. SELLER EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Freight. Rigging, and installation are not included unless otherwise specified, but arrangements can be made at an additional cost.
|
|
|
Vintage Delta Rockwell Unisaw, Miter Gauge For 3/8" x 3/4" Slot, Early Type
Miter gauge from a vintage Delta Rockwell Unisaw. Good used condition. See pics for details. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please.
|
|
|
Vintage Delta Jet Lock Fence Ass'y for Unisaw or Contractor's Saw
Vintage Delta Jet Lock Fence Ass'y for Unisaw or Contractor's Saw, Click to View Image Album Click to View Image Album Click to View Image Album Complete fence assembly in good working condition that fits many Delta& Rockwell Delta table saws. Approx. 24-1/4" CL to CL of rails. This fence has an extruded aluminum cross table bar vs. other eras that used fabricated steel bars. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Master Card on our commercial auctions plus PayPal if you must. We ship via USPS. Cheapest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are ... moreshipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occasionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on any item that weighs more then 150 lbs. you can be sure the shipping quote listed is incorrect. eBay doesn't allow our auction listing service
|
|
|
1.5 HP 1Ph Unisaw Motor
Nice used Unisaw motor. I have had it in my cabinet shop for about 9 years and it has run smooth and strong the whole time. My work has moved toward continuous ripping of thick hardwoods so I bought a 3Hp motor and swapped them out. The 1.5Hp is great for all sorts of general table saw use and this is a perfect motor to use on the restoration of an older saw that has seen some abuse.
|
|
|
Delta Rockwell Milwaukee Rear Clamp Nut Knob for Unisaw or Table Saw Rip Fence
REAR CLAMP KNURLED LOCK NUT/ KNOB(PART NO. NCS-272) FOR DELTA ROCKWELL MILWAUKEE UNISAW AND 10" TABLE SAW JET-LOCK RIP FENCE. WAS ALSO USED ON THE 9" MODEL 34-600 TABLE SAW FENCE. NUT IS IN EXCELLENT CONDITION AND THE THREADS ARE INTACT. Will be parting out a Vintage Delta 10" Tilt Table Table Saw Model Number 1160 Including all parts. Original motor and stand. If you need any parts please message me
|
|
|
Delta 10" Unisaw 34-814 5HP 240V 1PH Table Saw Mobile Base 52" Biesemeyer - NR
Please find a very clean used Delta 10" 5HP(single phase- 240V) Unisaw for sale via NO RESERVE auction. The high winning bidder at the end of this 5 day auction will be the new owner of this fine saw. This saw currently sits in my northern Illinois garage and needs absolutely nothing before being placed into service. My original goal was to create a wood shop with this saw as the center point. I actually began to cover a few of the small openings within the lower saw cabinet with aluminum HVAC tape in preparation of dust collection. Due to current space and family related limitations. I have decided to invest in smaller portable tools that I can easily transport and set up wherever the work and/or opportunity exists. Please find additional saw related information located just below for your review. Delta 10" Unisaw- Year: 1996- ... moreRight tilt blade- Motor: 5 HP 240V single phase electric motor(runs great on a 240V 30amp circuit) Biesemeyer 52" T-Square Fence System- Mobile Base- Freud F80 Hyper-Finish Carbide Tipped Blade- Also Includes: Original manuals. Miter gauge and blade guard(as pictured) Please be sure to let me know if there is anything I can do to be of additional help. This saw is available for local pick-up ONLY and is located in Arlington Heights. IL. 60005. Please let me know if you would like to arrange a date/time to stop by and take a look at the saw in person before making a formal purchase. Please Note: Illinois sales tax(9% will be charged for in-state transactions. Thank you for the opportunity! Joe
|
|
|
Delta/Rockwell Unisaw/Shaper dust door ! Vintage art deco model Rare !!!
Vintage Delta/ Rockwell dust door for the unisaw or shaper. The rare art deco model. Thank You for looking. Please check all my other auctions. I will gladly combine shipping on multiple purchases.On the same day, to save you money! Insurance is at buyers request. Items paid for within four(4) days of auction end, Paypal only. Domestic shipping to the lower 48 only. If you bid and win you agree to the terms stated above.
|
|
|
Delta Unisaw 5 hp 3 phase eletric motor
This is Delta Unisaw 5 hp 3 phase motor in excellent condition. Very powerful motor used for a short time.
|
|
|
2 Delta Rockwell Unisaw/Shaper Table Extension Wings Cast Iron. 8" x 27" PITTED!
Used pair of cast iron extension wings from a Delta Rockwell Unisaw. THESE ARE PITTED ON THE SURFACE. 8" x 27" these will also fit the H.D. shapers. See pics for details. Check my other listings for more Unisaw parts. I will combine shipping. Paypal please.
|
|
|
Vtg-ROCKWELL/DELTA- NCS-160 -Auto Set- Miter Gauge/Gage- Unisaw Table Saw -Part
14.00 Normal 0 false false false EN-US X-NONE X-NONE Cosmetically Challenged! Vintage- Rockwell/ Delta Unisaw- 10" Table Saw"Auto Set- Miter Gauge" Casting No. NCS 160 Price Includes Shipping! We have for your consideration a used- obviously cosmetically challenged- Rockwell/ Delta- NCS 160- Auto Set- Miter Gauge" that came off a Vintage Delta 10" Unisaw- Table Saw in what would appear to be in fair to average overall use-able condition- considering the age of the tool! I do not see any obvious cracks/ breaks or repaired areas. Please refer to all 12 of the pictures for measurements* Y ou are seeing the miter gauge as it came off the saw- will obviously need cleaning. What can we say- please take a good look at all(12) pictures, please note: there are no other items and/or attachments of any sort included in the sale- ... morewhat you see is what you are getting" The Miter Gauge is used and shows wear- scratches/ scuffs/ marks/ paint over-spray/ tarnish& staining with areas of surface rust(see pics) we only mention this for accuracy as it does not detract from the usefulness of the part. Just a reminder- what you see is what you are getting- and once more- Price Includes Shipping! Please look at the pictures carefully and do not hesitate to ask questions before bidding. Thanks for doing business with us! Normal 0 MicrosoftInternetExplorer4 Normal 0 MicrosoftInternetExplorer4 OK. Time for the LARGE Fine Print: In the interest of making this a very pleasant experience for everyone. We would respectfully ask that all potential bidders read the below statements. 1) We respectfully ask that all winning bidders pay for their purchase using Paypal within 3 days of the auctions ending or immediately if a“buy-it-now” item is purchased. 2) Winning bidders live in the United States and your item purchased will be shipped to the same address you listed for Paypal. 3) We ONLY ship within the lower 48 continental United States. No exceptions. We ship items within 3 business days after payme
|
|
|
Nice - Delta Unisaw Dado insert measures 3 3/4" wide x 13 5/16" long
Up for auction is a Delta Brand"Dado Insert" for up to 8 inch diameter dado's. For 10" tilting arbor saw. This was used on my 10" Delta Unisaw-as shown in the photo. Measurements: 13 5/16" x 3 3/4" with set screws for"flush" exact adjustments-on steel table surface. Part number on the underside of Dado insert: 422-04-063-2004. Review photos before bidding. Payment terms: payment to Pay Pal. This item is only for sale in the United States. Shipping only in the United States!
|
|
|
VINTAGE DELTA ROCKWELL UNISAW BALL SWITCH SWITCH PLATE
Vintage Delta Rockwell Unisaw ball switch plate. Item is old not remanufactured showing signs of wear. Good for that collector of original saw parts. Free chipping. Please check out my other auctions.
|
|
|
Vintage Cutler Hammer Motor Starter Switch, Delta Unisaw Etc
Used CH push-button switch for Delta Rockwell Machinery. Or whatever else you like. Good condition. See all pics for details. Includes what is in the pics. Check my other listings for more parts. I'm parting out many Delta Rockwell machines. I will combine shipping. Paypal please. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14ac2015a90-0x10e-
|
|
|
DELTA ROCKWELL 10" UNISAW W/.Unifence & Table top Extension
5'10" Rails. 3'6" Extension Table& 43" Unifence. It can be used Vert. or Horiz. A really Special Use Fence. Had one for 40 yrs. it still running. Only repairs needed was belts& Switch. It's a real Working piece of Machinery. Sold As Is. PRICE REDUCTION $800.00 Firm on price! Last offer Or I will piece out as a part saw!
|
|
|
Delta Factory Table Saw Safety Guard Unisaw Contractors Saw
This is an original factory Delta table saw safety guard. It is lightly used and in good condition. If your original Unisaw or Contractors Saw guide is missing or damaged. This might be for you. We accept Paypal and other forms of payment. Payment must be received within 5 days of auction close! SHIPPING TO U.S. LOWER 48 STATES ONLY, UNLESS YOU E-MAIL ME IN ADVANCE! Shipping costs shown are to U.S. lower 48 states only! E-mail me for shipping quotes to other locations! Take a look at my other auctions, and as always, thanks for lookin'
|
|
|
Delta Unisaw cabinet door VINTAGE 21N2
Delta Unisaw cabinet door VINTAGE 21N2 Click to Enlarge Click to Enlarge 1111 W 3# F-12 Here is a. It is about 12" by 9" and has the knob. Good condition for it age. From the 70's. Paint is original with some contact cement on the front. I can feel a couple of dents on the louvers. The photographs in this listing show everything which is included in the sale. enlarge them for best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. We list items for local pick-up and items which we will ship. Shipped items go USPS(shipping days are currently Tuesday and Thursday as of 1-13) insurance and tracking are included on all items. And tracking number will be uploaded. Shipping cost charged is ... morefor delivery to one of the lower 48 USA states. Elsewhere will have additional cost. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. Shipments to AK and HI may incur an additional postage charge. Depending on USPS rates. We use Ebay Global Ship for items to be shipped outside the United States. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items listed for customer pick-up only will not be shipped. We accept payment via Paypal only. In accordance with ebay regulations. Payment is expected within 3 days. EBAY forwards all sales information. Therefore, California State Sales Taxes are collected and forwarded to the state of California; the rate is 8 75% DO NOT DUPLICATE OR COPY! Template Made By: © InkFrog.com inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
DELTA ROCKWELL 10" UNISAW .99 START NO RESERVE!!!!!
WOOD SHOP CLOSING! MASSIVE LIQUIDATION SALE! LOW RESERVE AUCTION STARTING AT.01! DELTA ROCKWELL 10" UNISAW 3 PHASE 220 V MODEL 34-450 EH 3236 EXCELLENT WORKING CONDITION FREE LOCAL PICKUP or buyer pays shipping cost plus a $100 handling fee Come see our 8.000 s/f warehouse in Sarasota, Florida at 2260 Whitfield Park Avenue. We are open M-F from 9am-3pm- all other times by appointment only! TEXT or CALL MSS Liquidators@ 941-915-4145 for more info. We deliver throughout Florida and volume discounts are available. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-14b02165696-0x103-
|
|
|
UNISAW extension wing LTA-402 machined to add a router table to your saw
MODIFIED UNISAW TABLE WING- ADDS ROUTER TABLE CAPABILITY TO YOUR EXISTING TABLE SAW. The heavy cast iron extension wing. When combined with the mass of your vintage Unisaw, makes a great router table. This sale is for one(1) Unisaw extension wing. Modified as described below, to accept a Bosch router, adding a very stable and functional router table on the far right side of your Delta table saw. We CNC machine a standard vintage Unisaw extension wing to accept the Bosch inverted router base. Making the saw and its extension wing into a permanent router table. Good router tables cost hundreds of $$. Take up additional room in your workshop, and may only get occasional use. This modified wing provides you an excellent router table at minimal cost, with no lost space, and with maximum versatility. The modifications and machining work are intended ... moreto mount the Bosch 1617 router. One of the very popular and most common routers on the market. Bosch offers a fixed base. P/n RA1165 that is made for inverted router table use. The RA1175 base can be readily purchased separately. The fixed base bolts to the underside of the router table. Accepts the standard 1617 router motor, and allows for a tee handle hex wrench to adjust the router bit’s height from above. Research these two Bosch part numbers to learn more about the router components and their features. We have machined the Unisaw cast iron table wing. Delta p/n LTA-402, to accept the Bosch router, without any detrimental effect on the casting or its functionality. The bottom side of the wing has been machined to provide a flat surface for the router base to attach. The table thickness after machining is still some 5/16” Leaving adequate material for the three(3) counter bored socket head cap screws that mount the router base to the underside. A fourth hole provides access for the 3mm hex key for adjusting the router’s height. The center hole is 2.0” in diameter. The router is located on the left to right centerline of the wing and about 7” back from the front edg
|
|
|
ROCKWELL UNISAW M0DEL 34-761 IN DC AREA
Rockwell Unisaw Model 34-761. Used Serial LC 6333 Rockwell Unisaw Model 34-761. This was donated to us recently from a working shop. But we do not have the electrical to test it. It is sold AS IS, for local pickup or your freight arrangements. Please ask away with any questions or for closeup photos as I'm not familiar with these large machines. You're more than welcome to come in during store hours and have a look. Please call ahead for David or Matt to arrange a showing, and we'll do our best to answer any questions you have. Terms: Auction is for local pick-up only. We will not be able to ship these materials. I can strap to a pallet for your shipper to pick up but I do not have a weight on this machine. Maryland State Sales Tax of 6% will apply. Please check our website for hours of operation, payment can be via paypal or ... morein person with the traditional forms. This item is being sold by Community Forklift. A nonprofit organization that turns our regions waste stream into a resource stream by recycling building materials and making them available at affordable prices. Did you know construction and demolition debris makes up OVER HALF of our nation’s solid waste? Contractors and manufacturers need to clear out leftovers and excess inventory. And have to throw away brand new items. During renovations, homeowners often have to toss out perfectly good things, like gently-used cabinets or appliances. These materials can be sold cheaply, so homeowners and small businesses can afford repairs– making neighborhoods cleaner and safer. We are also a resource for nonprofits, churches, and temples that fix up homes for the elderly or disadvantaged. Schools, artists, and theatre groups can buy low-cost art materials or props. Renovators can find antique trim to preserve historic buildings. Local governments receive less debris at landfills and incinerators, saving money and reducing greenhouse gas emissions. Everyone benefits from less waste and a cleaner environment! The proceeds from this sale go to help lift u
|
|
|
ROCKWELL DELTA 10" UNISAW TILTING TABLE SAW - NO RESERVE!
Rockwell Delta Unisaw Model 34-767 3hp 10" Table Saw This is a real workhorse. Those who follow these can attest. This is a real asset in any shop. We are selling this with no reserve. We will palletize and shrink wrap for your truck. Local pickup is welcome. SAW BLADE: 10" DIAMETER ARBOR: 5/8" DIAMETER MAXIMUM DEPTH OF CUT: 3 1/8" TABLE HEIGHT: 34" MOTOR: 3 HP@ Single Phase 240V 30A. Can also be 7.5HP@ 3ph Absolutely no Returns. All Sales are Final. Please contact us for any information or Operational Videos.
|
|
|
Vintage 1943 Delta Unisaw Motor Pulley in TERRIFIC Condition
This is the 5-1/2" drive pulley from the motor of a 1943 Delta Unisaw. Which I had bought in the mid-1980's from an 83-year-old man in Milford, CT, whose wife was pushing him to sell his power tools before he hurt himself(Yikes! Can she really DO that? I'm already 66! He had been able to buy the saw, during the War, because he was doing contracted work of some type, in his home shop, for Sikorsky Aircraft, in neighboring Stratford. He approached me at a craft show in Milford with an inquiry into my interest in them, as a woodworker, and I ended up purchasing 4 tools from him. I did not ever USE the 1hp"bullet" motor that came with it(which runs. Sounds nice, and I will try to list it for sale, one of these days, once I figure out how to ship its 80 pounds without bankrupting my customer, and can fabricate a serviceable ... morebox to ship it in) but used a 1-1/2hp enclosed motor that I had, so the only use the pulley has seen is the original owner's. The pulley is in wonderful condition. It would be hard to find a nicer original example in"used" condition. If you put your finger in the grooves to feel for a worn"ridge" between where the belts ran in the sheave and where they did not, you cannot feel one, and the photo shows that fine machining lines from the casting dies are still visible in the belt-ways, and have not been worn off by use. It has never been used in a continuous-production environment. Buyer pays actual shipping cost for 3 pounds. I DO sell internationally. To many countries, write me before you bid if you have any concerns about this. Thanks for looking& bidding! 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-14b149a94be-0x111-
|
|
|
DELTA MILWAUKEE UNISAW JUNIOR JR CABINET TABLE SAW MOTOR MOUNT TAM108 CASTING
DESCRIPTION: USED. MOTOR MOUNT FOR THE DELTA 8" TILTING ARBOR CABINET SAW. THE CASTING NUMBER IS TAM108. IT MEASURES 9 X 6 1/2 APPROX. THE PIN IS 5/8 DIAMETER. NO CRACKS OR REPAIRS. CLICK ON THE" SHIPPING AND PAYMENTS" TAB FOR INSURED. SHIPPING AND HANDLING CHARGES AND OPTIONS. I WILL COMBINE SHIPPING WITH OTHER ITEMS WHEN POSSIBLE. IF YOU WIN MULTIPLE LISTINGS WAIT FOR ME TO SEND AN INVOICE. CHECK OUT MY OTHER AUCTION LISTINGS. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* LIST OF TERMS: ALL ITEMS ARE SOLD. AS IS" NO WARRANTIES GIVEN OR IMPLIED. ALL ITEMS MUST BE PAID FOR WITHIN 5 DAYS FROM THE END OF THE LISTING. ALL ITEMS WILL BE SHIPPED. UNLESS OTHERWISE STATED IN THE BODY OF THE DESCRIPTION: NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. ALL SHIPPED ITEMS WILL BE SHIPPED ... moreUSING MY SHIPPING ACCOUNTS AND LABELS. I DO NOT WAIT FOR LABELS IN THE MAIL OR USE THE WINNING BIDDER'S"ACCOUNTS" ALL SHIPPED ITEMS WILL BE SHIPPED TO THE WINNING BIDDERS REGISTERED ADDRESS. NO DROP SHIPPING. MICHIGAN RESIDENTS AND PICK UP SALES PAY 6% SALES TAX. IF YOU BID. BUY OR WIN A LISTING YOU AGREE TO THE TERMS STATED ABOVE. IF YOU HAVE ANY QUESTIONS. PLEASE ASK BEFORE THE END OF THE LISTING* International Buyers– Please Note: INTERNATIONAL BIDDERS PAY WITH PAYPAL ONLY. NO OTHER KIND OF PAYMENT WILL BE ACCEPTED. NO DROP SHIPPING FOR INTERNATIONAL BIDDERS. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. H. RESALE L.L.C IS A 1 PERSON COMPAN
|
|
|
Delta Unisaw Badges
Nice condition unisaw badges from a unisaw i am parting out
|
|
|
Delta Unisaw Shaft Shield
Nice condition unisaw shaft shield from a unisaw i am parting out.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14b2408d250-0x10e-
|
|
|
Delta Unisaw Motor Mount Assembly
Nice condition unisaw motor mount assembly from a unisaw i am parting out
|
|
|
Delta Unisaw Guard And Brackets
Nice condition unisaw guard assembly from a unisaw i am parting out I ncludes all brackets
|
|
|
Delta Rockwell 10" Unisaw Or Contractor Table Saw Throat Plate/Insert Tool
This Delta Rockwell 10" Unisaw or Contractor Table Saw Throat Plate Insert Cat No. 1451 This is used and came from a standard Unisaw. I have other original parts and tools for sale as well. Thanks for looking.
|
|
|
Delta Rockwell Unisaw Motor Pin with Retainer Clip
Delta Rockwell Unisaw Motor Pin with Retainer Clip. See photo for details.
|
|
|
Delta Rockwell Unisaw Yoke, Motor Mount, Front Trunnion, Rear Trunnion, and more
Used Delta Rockwell Unisaw Yoke. Motor Mount, Front Trunnion, Rear Trunnion, and Elevation Shaft with gear. Good condition. See pics for details.
|
|
|
VINTAGE ROCKWELL MITER GAUGE - FITS UNISAW & OTHER SAWS WITH 3/8" X 3/4" SLOT
I will gladly ship multiple items together as long as it is safe to do so.
|
|
|
Delta Unisaw Jet Lock fence rails long version 70" x 1 3/8"
Delta Unisaw Jet Lock long set of two rails complete with all four correct mounting bolt- spacers. Nuts, washers and end caps. Dimensions: 70"x 1 3/8" Micro adjust notches and 25" scale in great shape Thank you for looking and please see pictures for full details.
|
|
|
DELTA MILWAUKEE UNISAW JUNIOR BLADE GUARD
RIMCO ROBERT IVENS MACHINERY COMPANY 613 W. Bruce St. Milwaukee WI 53204 414-272-6686 Welcome to Robert Ivens Machinery Company Our Mission: Productive and Satisfied Customers. Up for AUCTION: DELTA MILWAUKEE UNISAW JUNIOR BLADE GUARD In used condition No bends or cracks- less one spot on the back of the guard(see photos) Overarm style mount Probably 40's-50's era Was on a Unisaw JR. All metal construction Ready for work! Check photos for details Email us with any questions! WE COMBINE SHIPPING! Check out my! Be sure to add me to your! Robert Ivens Machinery Company(RIMCO) is Wisconsin's largest dealer in used woodworking machinery A sole proprietorship in business for more than twenty-five years, RIMCO's business philosophy is based upon value and customer satisfaction. If you have an interest in woodworking machinery. You ... moreare welcome to call and ask about our extensive. Ever changing inventory. Your business will be most appreciated.
|
|
|
Vintage Unisaw Rear Trunnion : LTA 406
ANNIE'S BOUTIQUE OF TREASURES NEW AND USED SURPLUS AND COLLECTIBLE'S For sale are parts from Vintage Unisaw serial# 123-5897. I have dismantled it and I am listing all parts for sale at this time. If you want several smaller parts I will combine them for shipping purposes. This listing is for: Rear Trunnion. LTA 406 Good condition I WILL ACCEPT PAYPAL. AND? I SHIP EVERY 2-3 DAYS NOT INCLUDING WEEKENDS OR HOLIDAYS. BECAUSE ALL SHIPPERS ARE CLOSED THEN MOST ALL ITEMS SHIP USPS OR FEDEX GROUND I PACKAGE EVERYTHING THE BEST I CAN AND USE. PACKING PAPER, BUBBLE WRAP, NEW BOXES AND ENVELOPES WHEN POSSIBLE:ADDITIONAL INFORMATION: I LEAVE FEEDBACK FOR ALL WHO LEAVE FEEDBACK FOR ME. SOMETIMES I SEEM A LITTLE SLOW BUT I AM JUST GROUPING FEEDBACKS TOGETHER AND DOING MANY AT A TIME.SO BE PATIENT I WILL GET TO ALL. PLEASE UNDERSTAND WE ALL MAKES ... moreMISTAKES AND IF I MAKE A LISTING MISTAKE CONTACT ME SO I CAN CORRECT ANY ERRORS. BAD FEEDBACK FOR A MISTAKE IS NOT FAIR TO ANYONE, COMMUNICATION IS THE MOST PRACTICAL WAY TO RESOLVE MISTAKES AND MAKE EBAY MORE FUN. SHIPPING FEES: I WILL ALWAYS COMBINE ITEMS TO REDUCE SHIPPING COSTS. PLEASE UNDERSTAND THAT EBAY HAS CAUSED SHIPPING FEES TO GO UP BECAUSE THEY INSIST ON GETTING THE SAME FEE ON SHIPPING AS SALE OF THE ITEM NOW AND I AM ONLY RECOVERING WHAT IT COST ME. I DO NOT PROFIT FROM SHIPPING, MANY TIMES I LOSE. RETURNS: I WILL ACCEPT RETURNS IN ORIGINAL UNOPENED AND UNUSED CONDITION UP TO 14 DAYS. HOWEVER BUYER IS RESPONSIBLE FOR ALL RETURN COSTS INCLUDING INSURANCE Design By: FreeAuctionDesigns Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Delta Rockwell Unisaw Jet Lock Fence for 27" cast tables
Delta Rockwell Unisaw Jet Lock Fence for 27" cast iron table tops Fits most Delta. Rockwell, Craftsman 113 series and other table saws with a 27" deep cast iron top with the 1 3/8" round guide rods. Complete in very good usable condition. Lock lever and micro adjust knob both work as they should. Moves freely and locks up tight. Fence is straight with no blade marks or dents. Could use a clean up and some paint. A set of 70" x 1 3/8" guides with spacer bolts for this fence are available on a separate auction. Thank you for looking and please see our other auctions. I will combine shipping on most items.
|
|