|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Portland, United States 【Multi-function】Tig welder with Lift Tig/2T/4T Gas/Gasless Mig/Stick, Tig welder machine with Lift TIG function. This Mig welder also with function: Arc ... moreForce, It’s very easy to help to get more powerful under MMA function, With this function, the welding machine can do better stick welding, Function 2T/4T will make your fingers free.
Buy It Now
$98.36 Shipping Condition: New Location: Canada
Buy It Now
Free Shipping Condition: New Location: Chino, United States Qh-1/H Metal Powder Spray Welding Torch Oxygen Acetylene Flame Welding Gun Us Product Description: ★ Heat the Acetylene Flame on the Workpiece to 300-400 ... moreDegrees Celsius. ★the Distance Between the Nozzle and the Workpiece Surface Is 120~150 Mm. at the Same Time, the Self-fluxing Alloy Powder Can Be Evenly Sprayed on the Surface of the Workpiece, and Then Melted by the Flame to Appear on the Surface Mirror Surface, Gradually Moving the Melting Position, so That the Alloy Powder and the Workpiece Are Polarized and Dispersed. Forming an Adhesive Layer ★ Different Alloy Powders Can Be Used to Obtain Different Properties of Wear-resistant and Corrosion-resistant Layers. ★ Due to the Uneven Particle Size of the Powder, or Becoming Wet, the Powder Valve Switch Is Invalidated and Block.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Qh-1/H Metal Powder Spray Welding Torch Oxygen Acetylene Flame Welding Gun Us Product Description: ★ Heat the Acetylene Flame on the Workpiece to 300-400 ... moreDegrees Celsius. ★the Distance Between the Nozzle and the Workpiece Surface Is 120~150 Mm. at the Same Time, the Self-fluxing Alloy Powder Can Be Evenly Sprayed on the Surface of the Workpiece, and Then Melted by the Flame to Appear on the Surface Mirror Surface, Gradually Moving the Melting Position, so That the Alloy Powder and the Workpiece Are Polarized and Dispersed. Forming an Adhesive Layer ★ Different Alloy Powders Can Be Used to Obtain Different Properties of Wear-resistant and Corrosion-resistant Layers. ★ Due to the Uneven Particle Size of the Powder, or Becoming Wet, the Powder Valve Switch Is Invalidated and Block.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Machine for Granular Materials 220V. Applicable material: Granular material. - This machine is suitable for a wide range of materials, granular materials ... morecan be used. Hopper capacity: 39.6gal(150L). Hopper outlet size: 6.42" 6.42"(16.3cm 16.3cm).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature: ①Made of high-quality metal, strong and durable ②The wire feeding speed is fast and efficient ③Small size, no space, easy to carry Parameter: ... morePower: 25W Voltage: 24V Current: 2A Size: 210*150*140mm Weight: 0.85KG Wire feeding speed: 2-18m/min Wire diameter: Φ0.6~Φ10mm Wire feed shaft size (OD*ID*H): 30*10*10mm Applicable card slot: V/K Packing size: 270 * 270 * 170mm Package weight: 1.38KG Packing list: 1*Wire feeder.
Buy It Now
Free Shipping Condition: New Location: Miami, United States 【Multi-function】Tig welder with Lift Tig/2T/4T Gas/Gasless Mig/Stick, Tig welder machine with Lift TIG function. This Mig welder also with function: Arc ... moreForce, It’s very easy to help to get more powerful under MMA function, With this function, the welding machine can do better stick welding, Function 2T/4T will make your fingers free.
Buy It Now
$21.83 Shipping Condition: New Location: LEICESTER, United Kingdom Genuine WADKIN BURGREEN Rubber Roller for Power Feed D=120mm B=60mm bore 35 mm fixings 2x8mm fixings centre-centre 48mm hub diameter 85mm A VAT Invoice ... morewill be issued with all purchases Industrial Quality Rubber Covered Power Feed Roller: Wadkin Bursgreen powerfeed rollers have the rubber vulcanised to a precision aluminium hub. Fits most popular power feeders Steff, Maggi, Wadkin, CoMatic NOTE: Our Special Price is shown VAT included - Our Ebay Listing Price shown includes VAT at 20% Why not visit our Fully Operation Centre Of Excellence, with over 30 machines ready to run. To Arrange a demo contact Steve McGloin .
Buy It Now
$43.19 Shipping Condition: New Location: Indianapolis, United States Manufactured by Tweco. We are an authorized Miller, Lincoln, Tweco and Weldmark Distributor. strong, independent distributors. This gun is manufactured ... moreby Tweco for our cooperative. 400 amp Mig Gun.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Milling machine feeder is suitable for drilling and milling machine series. Installed on the milling machine, to provide smooth power to the milling machine, ... moregreatly improve the work efficiency. 110V AL-360Y-axis Automatic Power Feeder for Horizontal Milling Machine.
Buy It Now
$25.00 Shipping Condition: Seller refurbished Location: Los Angeles, United States This is a Miller PSA-2 wire feed control with cable, stock number 141604 Has been refurbished And testedThis unit is used to connect the new 24 Volt wire ... morefeeders to the older miller power supply with 2 receptacles Will ship economy ground to the lower 48
Buy It Now
Free Shipping Condition: New Location: 金东区, China Mini lightweight MIG wire feeder assembly for Mig Welder welding machine. 1 Mig wire feeder. Feed shaft size: 25 9 7.5mm/0.98 0.35 0.3". The product is ... morevery compact and does not take up much space on the workbench.
Buy It Now
Free Shipping Condition: New Location: Taiwan DC servo Brush less Motor Big Torque Any question please feel free ask.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Feature: ①Made of high-quality metal, strong and durable ②The wire feeding speed is fast and efficient ③Small size, no space, easy to carry Parameter: ... morePower: 25W Voltage: 24V Current: 2A Size: 210*150*140mm Weight: 0.85KG Wire feeding speed: 2-18m/min Wire diameter: Φ0.6~Φ10mm Wire feed shaft size (OD*ID*H): 30*10*10mm Applicable card slot: V/K Packing size: 270 * 270 * 170mm Package weight: 1.38KG Packing list: 1*Wire feeder.
Buy It Now
Free Shipping Condition: New Location: Portland, United States 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included ... moreaccessories, cleaning brush, protective mask. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
Buy It Now
$128.90 Shipping Condition: New Location: China 110V / 220V milling and drilling machine power feed 450 in-lb power feed machinery for X ,Y,Z axis mill machine AL-310S. Milling machine tool walker AL-260 ... moreX-axis (110v). Low noise and energy saving. Spiral bevel gears are more efficient and less noisy.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States High Power Auto Suction Vacuum Feeding Machine 220v. ⑧ Storage Hopper. ④ Suction Port. 1 Vacuum Feeding Machine Grey. Motor 1.1KW/1.5HP, Carbon Brush ... moreType. Host Size (MM) 550 400 600. ③ Filter Net. Net Weight of Main Engine (KG) 13.
Buy It Now
Condition: Used Location: Botkins, United States 1 OTC / Daihen Digital Inverter Welder. 1 Long Power Cable to Connect Wire Feeder to Welder. 1 Ground Cable With Clamp. 2 Wire Feeders Model CM-741U (One ... moreof Them Might Just be for Parts).
Buy It Now
$282.00 Shipping Condition: New Location: China 1 Suction feeder + 4 stainless steel suction pipe lock +. Hopper capacity: 7.5L. 1 dust bag + 1 suction hose + 1 stainless steel suction gun. Motor: carbon ... morebrush copper wire motor. Model number: MF-300G.
Buy It Now
Free Shipping Condition: New Location: United States Quality IGBT module, with higher Inverter working frequency, dramatically reduce the electric energy loss on the welding process. 1 2in1 Welding Machine. ... moreNot limited by welding position, suitable for all kinds of tricky angle welding.
Buy It Now
$2123.00 Shipping Condition: New Location: China IN6 reflow oven (no bottom stand )- 1pc. Model IN6 Reflow oven. Popular by personal engineers, universities for education and SMT labs small pcba production ... morerun. Positioning mode outside positioning holes.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature: ①Made of high-quality metal, strong and durable ②The wire feeding speed is fast and efficient ③Small size, no space, easy to carry Parameter: ... morePower: 25W Voltage: 24V Current: 2A Size: 210*150*140mm Weight: 0.85KG Wire feeding speed: 2-18m/min Wire diameter: Φ0.6~Φ10mm Wire feed shaft size (OD*ID*H): 30*10*10mm Applicable card slot: V/K Packing size: 270 * 270 * 170mm Package weight: 1.38KG Packing list: 1*Wire feeder.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Gas type: O2, C2H2 (acetylene). 1 x The acetylene joint. Gas TypeO2, C2H2 (acetylene). ★ The distance between the nozzle and the workpiece surface is ... more120~150 mm. Forming an adhesive layer. ★ Clean the spray gun regularly to avoid obstruction of the air tube hole.
Buy It Now
$6.00 Shipping Condition: Used Location: Redondo Beach, United States Equipped with FMB Bar Feeder; Chip Conveyor;. Under power Los Angeles, CA. Tool capacity 17. Back spindle speeds 5000.0 rpm. Main spindle speeds 8000.0 ... morerpm. Power 5.0 hp.
Buy It Now
Free Shipping Condition: New Location: United States Feature: ①Made of high-quality metal, strong and durable ②The wire feeding speed is fast and efficient ③Small size, no space, easy to carry Parameter: ... morePower: 25W Voltage: 24V Current: 2A Size: 210*150*140mm Weight: 0.85KG Wire feeding speed: 2-18m/min Wire diameter: Φ0.6~Φ10mm Wire feed shaft size (OD*ID*H): 30*10*10mm Applicable card slot: V/K Packing size: 270 * 270 * 170mm Package weight: 1.38KG Packing list: 1*Wire feeder.
Buy It Now
$66.40 Shipping Condition: Used Location: Albion, United States Search Our Store: Miller SuitCase X-Treme 12VS Voltage-Sensing Wire Feeder Welder Kit Welcome to ONE1STOPAUCTIONS Miller SuitCase X-Treme 12VS Voltage-Sensing ... moreWire Feeder Welder Kit In excellent pre-owned condition. Comes with Bernard QT3-45 Mig Gun. Has two display screens on front for Wire Speed and Voltage/Amps. Recommended Weld Parameter Starting Points reference guide on inside label. Wire is Not included. See Photos for further Details. We Are Pottstown Cash Traders 232 East High Street Pottstown. PA 19464 SHIPPING | PAYMENTS | RETURNS | ABOUT US | CONTACT US Continental US shipping is quoted in the auction. We do not sell or ship internationally Shipping& handling is quoted flat rate parcel post or priority for the U.S. Parcel post shipping does not include tracking. Only delivery confirmation. Parcel post can take up to 11 working days. Larger packages will be assessed according to the U.S.P.S. charges past zone 5. All items selling for over $250.00 will include signature confirmation. Please contact us for a quote on larger items. If you feel that our shipping& handling is too high-PLEASE do not bid. Handling charges are included in the shipping charges. We offer local pick up in our store at 232 East High Street. Pottstown, Pa. There is a $4.00 handling fee for local pick up PA residents will be charged 6% sales tax If you see the package has been damaged in shipping. Please return before opening! We gladly accept Paypal Payment is expected within 5 days. If you have any questions regarding this listing or payment information. Please feel free to email through Ebay or call us at 610-705-0304. We are Open Monday thru Friday 10am to 6pm EST. We describe each item the best we can. Many items we sell are previously used& will not include anything but the item. What you see in our photos is what you'll receive. All items are in working condition unless stated otherwise in this listing. We encourage questions to eliminate any misunderstandings. Our return policy is. If you are not satisfied wi
Buy It Now
Condition: Used Location: San Diego, United States If you have any questions regarding this machine. Please contact Michael@ 909) 652-1400. Make: Lagun Model# FTV-1 Serial# SE-7652 Country of Origin: Spain ... moreCondition: Great Features: Sargon Gold Standard 2-Axis DRO. Infinitely Variable Spindle Speeds. Lagun X-Axis Power Feed. Coolant System. Specifications: Work Table: Surface Area: 42" x 9" T-Slot Center Distance: 3@ 2.5" centers T-Slot Sizes: 0.625" Maximum Weight of Workpiece: 750 lbs. Travels: X-Axis Table Travel: 30" 26" with power feed) Y-Axis Table Travel: 16" Z-Axis Table Travel(knee) 16" Quill Travel: 5" Ram Travel: 22-3/16" Spindle: Spindle Taper: R8 Spindle Diameter: 1.875" Quill Diameter: 3.375" Distance Spindle to Table(maximum) 18" Distance Spindle to Column(minimum/ maximum) 5" to 27" Speeds: 55 to 4.250 RPM Power Quill Feed: 0.0015"rev. 0.003"rev& 0.006"rev Motor: 3 Horsepower. 220-230/ 380-415 Volt, 1,425/ 1,730 RPM, 50/ 60 Hz. Head Adjustments: Head Swivel: 90 degrees Head Cant: 45 degrees. General: Electrical: 220-230/ 380-415 Volt. Three Phase Overall Dimensions: 60" x 64" x 84" tall. Comes as shown in pictures. GUARANTEE: If any machine guaranteed by us does not prove satisfactory mechanically. The Purchaser may return it freight prepaid within 14 days from date of shipment and we will refund the purchase price in full. This does not apply to machine sold“as is” or“subject to inspection” This guarantee applies only to machines which we own. The machine must be returned in the same condition that it left our warehouse. MachineStation shall not be responsible for any damage done by truckers, riggers, or other parties. Machine damaged in shipping are not covered under the return privilege. WARRANTY: Seller makes no warranties of any kind whatever. Expressed, or implied. All specifications and descriptions of said goods are approximate, not binding and meant only as a guide. It is the Buyer’s responsibility to inspect the goods and ascertai
Buy It Now
Condition: Used Location: Onawa, United States Lincoln Electric Power MIG 200 Please Note: This is the machine that was previously listed without the serial number because we couldn't read the ... moretag. We called Lincoln and found out where the number was located inside the machine and are glad to include the correct serial number in this listing! Machine age is 2001. Serial: M1010420253 K Number: K1766-1 Code: 10564 Dimensions: 31.8 in. x 18.9 in. x 38.8 in. Weight: 198 lbs. Diamond Core Technology for quality mild steel. Stainless steel and aluminum welding performance. A soft. Stable arc that produces welds with reduced spatter. Smooth. Stable starting performance. The wide"sweet spot" permits a broad range of voltage adjustment for critical applications. Industrial wire drive for reliable feeding. Lockable tool compartment and tool tray. Easy load wire compartment. Built-in undercarriage. Input: 208/230 Volts Single Phase 60 Hz. 36A/ 33A@ 30% Duty Cycle 33A/ 30A@ 40% Duty Cycle 28A/ 26A@ 60% Duty Cycle Output: 200A/ 22V/ 30% 180A/ 23V/ 40% 150A/ 24V/ 60% Output Range 30-200A 50-700 ipm WFS OCV: 15-39V Machine Comes With: NEW Flowmeter NEW Radnor 250A MIG Gun NEW Ground Clamp Gas Hose This machine has been fully checked out and is in complete A1 condition and ready to weld. When this machine was sold new it sold for over $1900.00 HIGHLY RATED SELLER! BID WITH THE CONFIDENCE OF 100% POSITIVE FEEDBACK! Please refer to freight calculator for freight cost information. All freight shipments require a complete address. A contact name, a contact phone number and a contact email. Freight shipments also require your indication of'Business with a dock' Business without a dock' and whether there is a forklift/ pallet jack available or if you require'Residential' delivery. Freight quote is based on the information that you supply to us. The freight company will be instructed to collect additional charges before delivering the item/ items if any of the shipping information is found to be incorrect or incomplete. If freight calculation does
Buy It Now
$9.99 Shipping Condition: New Location: Chino, United States Gas type: O2, C2H2 (acetylene). 1 x The acetylene joint. ★The distance between the nozzle and the workpiece surface is 120~150 mm. Forming an adhesive ... morelayer. ★ Clean the spray gun regularly to avoid obstruction of the air tube hole.
Buy It Now
Free Shipping Condition: New Location: United States New Z-AXIS Power Table Feed Milling Machine Power Feed Table Mill, 450in-lb Torque, 0-200PRM Adjustable Speed. You will get worry-free 3 years warranty ... moreand lifelong technical guidance. 1 x Power Feed for Milling Machine.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Milling machine feeder is suitable for drilling and milling machine series. Installed on the milling machine, to provide smooth power to the milling machine, ... moregreatly improve the work efficiency. automatic power feeder for horizontal milling machine 1.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Milling machine feeder is suitable for drilling and milling machine series. Installed on the milling machine, to provide smooth power to the milling machine, ... moregreatly improve the work efficiency. AL-460Z Auto Cutter Tool Feeder for Horizontal Drilling Milling Machine Z-axis110V.
Buy It Now
Free Shipping Condition: New Location: Miami, United States For use with MDX-100 MIG Guns. Threaded nozzle stays tight during use / cleaning due to the steel retaining ring on the diffuser.
Buy It Now
Condition: Used Location: Guilford, United States Make: Tsugami Model: M08SY-II Condition: Used, Overall in Great Shape, ready for use Very Nice Machine, Dont Sleep on this deal! -Six Programmable Axes ... more(X1, Y1, Z1, A1, Cmain and Cback) -Integral spindle motors on main and subspindles for minimal vibration and fast cutting.
Buy It Now
Condition: Used Location: Millwood, United States Weight = 260 lbs.
Buy It Now
$300.00 Shipping Condition: New Location: Rancho Cucamonga, United States Hand Air-Blowing Screw Feeder Machine. First, the feeding system will order screws and distribute them through allocation, and then send them to the screwdriver ... morevia the pipe. After that, the electric or pneumatic screwdriver will lock the screws into the right place of the products.
Buy It Now
Free Shipping Condition: New Location: Hicksville, United States Miller N-M1218C AccuLock™ MDX™ Thread-On Nozzle, 1/2" Orifice, 1/8" Tip Recess, Copper (1 per pkg). For use with MDX-250 MIG Guns.
Buy It Now
Free Shipping Condition: New Location: United States Easy Working: Work with this wire feed motor, you will find you welder enables high efficiency and easy use. Feature: 1. Motor Power: 10w. Wire Feeding ... moreSpeed: 2-13 (m/min). Item Type: Wire Feed Motor.
Buy It Now
Free Shipping Condition: Brand New Location: China 1× Automatic screw feeder machine. 【Adjustable rail】Width adjustable guide rail, rail width 1.0-5.0MM. 【Wide Application】Widely used for screw heads of ... morevarious types, different lengths and shapes. Can be used for M1 to M5 (≤ 20 mm) between any specifications by adjusting reasonably.Can use shim screw, flat head screws, self tapping screw, countersunk screw and so on.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States High Power Auto Suction Vacuum Feeding Machine 220v. ⑧ Storage Hopper. ④ Suction Port. 1 Vacuum Feeding Machine Grey. Motor 1.1KW/1.5HP, Carbon Brush ... moreType. Host Size (MM) 550 400 600. ① Air Pump. ⑤ Balance Block, Balance Bar.
Buy It Now
Condition: Used Location: Chico, United States 24" DuraFeed Bowl Feeder with Linear Feeder. Serial No 6509, 6540, 6510. Frequency 120 Full Wave Over all width from Front of bowl to back side of bowl ... more44". 1st lane part center line 14" 2" off bowl Wall 1st Ln to 2 nd Ln Cl 1-1/2" 2 nd to 3rd CL N/A.
Buy It Now
Free Shipping Condition: New Location: Switzerland The surface of the block is complete, dense and beautiful. Hollow Block Making Machine, Paving, Block Making Machine, Interlock Block Making Machine, ... moreCurbstone Block Machine. Pull back small moving brick machine to move the brick.
Buy It Now
Condition: Used Location: Sterling Heights, United States Very Nice Universal GSM Pick and Place Machine For Sale. Universal GSM Pick and Place. - 7 spindle, FlexJet Head. - Includes linear motors in both X and ... moreY axis. - New Air filters.
Buy It Now
$40.00 Shipping Condition: New Location: Vietnam Will be replaced for the old version dnc one. they only differ in size. Replace PC running a DNC software. transmit DNC drip program (works in TAPE mode). ... moreSPECIAL FUNCTIOND : drip feed program to fanuc 6M CNC machine via 50-pin parallel port.
Buy It Now
$249.00 Shipping Condition: Used Location: Wolcottville, United States This is a used welder that has been tested and works and welds good. This unit is set up for 0.035" wire. This unit is ready to go, hook up the power, ... moreadd wire and shielding gas and you can weld. Welder Specs.
Buy It Now
Free Shipping Condition: New Location: Savannah, United States Mig gun connector Fits Lincoln Magnum PRO 200/300/400 For Lincoln Power MIG, Power Wave C300 and Miller Feeders.
Buy It Now
$89.49 Shipping Condition: New Location: Bristol, United States LINCOLN ELECTRIC PRO-MIG 140 Compact Wire Welder- K2480-1 EXCELLENT CONDITION Requiring common 120 volt input power. The PRO MIG 140 can be used almost ... moreanywhere. With simple two knob control. The machine is easy to set up for gasless flux-cored welding for deep penetration on thicker steel or gas-shielded MIG welding on thin gauge steel, stainless or aluminum. Physical Condition: This welder is in excellent physical condition. It shows some light use and was very well taken care of. All of the included parts are also in excellent condition. Functional Condition: This welder is in excellent condition and is 100% usable. There are no known problems with this welder. Specifications: Fully adjustable drive system reduces the chance of wire tangling and crushing. Brass-to-brass gun connection enhances conductivity. Durable cast aluminum gear box delivers added drive torque and quiet operation. Easy-turn numeric drive tension indicator identifies optimized ranges for different wire diameters. Forgiving arc makes dialing in your application easy. Smooth arc starts with minimal spatter. Wide 30-140 amp welding output range. MIG weld 24 gauge up to 3/16 in. 4.8 mm) sheet metal in a single pass. Weld up to 5/16 in. 7.9 mm) steel using self-shielded Lincoln Electric Innershield(FCAW-S) wires. Input Power: 120/1/60. Rated Output: 90A/19V/20% Input Current: 20A. Output Range: 30-140A. Solid Wire Size Range: 025-035 in. Cored Wire Size Range: 030-035 in. Wire Feed Speed Range: 50-500 ipm(1.3-12.7 m/min) Dimensions(H X W X D) 13.7 in x 10.15 in x 17.9 in(357 mm x 258 mm x 472 mm) Net Weight: 50 lbs(22.7 kg) If you have any questions about this welder please contact us. Sharp Tech: At Sharp Tech we provide customers with all sorts of technology both working and for repair. Most of our auctions are no reserve and start at 1 penny. Happy Bidding. Returns: We have a 100% product guarantee. Returns must be shipped back within 7 days of receiving item. Questions: If you have any questions about us or our items pleas
Buy It Now
Free Shipping Condition: New Location: China 1 Welder Wire Feeder. The actual product color may deviate from the photo due to light. Soldering assistant machine, it suitable for 0.8/1.0mm wire. The ... moreproduct is very compact and does not occupy much space on the workbench.
Buy It Now
Free Shipping Condition: New Location: Monroe, United States Profax Miller 180 Amp. 030-.035 15' MIG Welding Gun. This is a 15 foot 180 amp MIG gun assembly set up to run. 030 or. 035 wire. This MIG gun has a Miller ... moreconnection. MIG Welding. Brazing & Soldering Alloys.
Buy It Now
Condition: For parts or not working Location: Willoughby, United States APV CREPACO STAINLESS STEEL FRUIT FEEDER. 3" OUTLET. Job #: 123. ERC #: MO-5063. Category: FEEDERS. Weight: 1454 LBS.
Buy It Now
$578.99 Shipping Condition: New Location: China Motor speed 280/1400rpm. Feed wheel spring height: 27mm. Motor power: 750W/550W. Conveying speed: 3.5/5/7/10/12.5 /16/5/32m/min.
Buy It Now
Condition: Used Location: Independence, United States This is a PAIR(2) of Okuma Captain L370W Big Bores. I'm the only owner bought new, ran a production job then unhooked when job was done in 2018 been in ... morestorage since. Included with the machines are the chucks pictured, LNS Quickfeed bar feeders, parts catchers.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Milling machine feeder is suitable for drilling and milling machine series. Installed on the milling machine, to provide smooth power to the milling machine, ... moregreatly improve the work efficiency. for Horizontal Milling Machine.
Buy It Now
$78.00 Shipping Condition: Used Location: Milton Freewater, United States Search Our Store: Miller SuitCase X-Treme 12VS Voltage-Sensing Wire Feeder Welder Kit Welcome to ONE1STOPAUCTIONS Miller SuitCase X-Treme 12VS Voltage-Sensing ... moreWire Feeder Welder Kit In excellent pre-owned condition. Comes with Bernard QT3-45 Mig Gun. Has two display screens on front for Wire Speed and Voltage/Amps. Recommended Weld Parameter Starting Points reference guide on inside label. Wire is Not included. See Photos for further Details. We Are Pottstown Cash Traders 232 East High Street Pottstown. PA 19464 SHIPPING | PAYMENTS | RETURNS | ABOUT US | CONTACT US Continental US shipping is quoted in the auction. We do not sell or ship internationally Shipping& handling is quoted flat rate parcel post or priority for the U.S. Parcel post shipping does not include tracking. Only delivery confirmation. Parcel post can take up to 11 working days. Larger packages will be assessed according to the U.S.P.S. charges past zone 5. All items selling for over $250.00 will include signature confirmation. Please contact us for a quote on larger items. If you feel that our shipping& handling is too high-PLEASE do not bid. Handling charges are included in the shipping charges. We offer local pick up in our store at 232 East High Street. Pottstown, Pa. There is a $4.00 handling fee for local pick up PA residents will be charged 6% sales tax If you see the package has been damaged in shipping. Please return before opening! We gladly accept Paypal Payment is expected within 5 days. If you have any questions regarding this listing or payment information. Please feel free to email through Ebay or call us at 610-705-0304. We are Open Monday thru Friday 10am to 6pm EST. We describe each item the best we can. Many items we sell are previously used& will not include anything but the item. What you see in our photos is what you'll receive. All items are in working condition unless stated otherwise in this listing. We encourage questions to eliminate any misunderstandings. Our return policy is. If you are not satisfied wi
Buy It Now
$249.00 Shipping Condition: Used Location: Wolcottville, United States Mig gun is a 10ft Tweco 400Amp mig gun that is in decent condition. This is a used welder that has been tested and works and welds good. This unit is ... moreset up for 0.035" wire. This unit is ready to go, hook up the power, add wire and shielding gas and you can weld.
Buy It Now
$927.00 Shipping Condition: New Location: China The flexible feeders supports bulk components, stick components, short-cut tapes and. By moving the magnetic pins and bars, you can fix the feeders whereever ... moreyou want on the platform.The newly-designed stick feeder with its compact shape, is perfectly compatible with the tape feeder system.
Buy It Now
Free Shipping Condition: Used Location: Bismarck, United States Tafa mdl. 30-8A Arc Spray Power . The feeder is not available. Welder onlyMust have business addres with dock or forklift or pizckup ar freight center ... morefor free ship
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature: ①Made of high-quality metal, strong and durable ②The wire feeding speed is fast and efficient ③Small size, no space, easy to carry Parameter: ... morePower: 25W Voltage: 24V Current: 2A Size: 210*150*140mm Weight: 0.85KG Wire feeding speed: 2-18m/min Wire diameter: Φ0.6~Φ10mm Wire feed shaft size (OD*ID*H): 30*10*10mm Applicable card slot: V/K Packing size: 270 * 270 * 170mm Package weight: 1.38KG Packing list: 1*Wire feeder.
Buy It Now
Free Shipping Condition: New Location: Dayton, United States Notice: Ruida RDC6445S and RDC6445G are combined into a unified model: RDC6445G which supports Double-Head Linkage Function. RDC6445G requires a new version ... moreof the software. Please leave a message,we will send it via email if you want. Model 6445G Engraving Method Laser MPN Does Not Apply Brand Ruida Featured Refinements Laser Engraver UPC 721618872055.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Rowland Heights, United States MIG: 60% at 205A, 100% at 158A. 205 Amp MIG & Flux Cored Wire, TIG Torch, Stick Arc DC Inverter 3-in-1 Combo Welder.Use MIG Gun Can weld 1/2" Aluminum ... moreVery Easily,Also Spool Gun Capable for Weld Aluminum.
|
|
|
|