|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Muskegon, United States Item is used. Tested. Works good. CJ-4387-A1-1. Description. From intricate contour sanding and shaping to fast stock removal. This combination belt and ... moredisc sander does it all! Back plate on the belt sander lets you apply pressure for fast shaping. Remove the back plate for curves and nonstandard shapes. Easy tension adjustment. Cast iron base. Also includes a floor stand. Belt table and disc table each tilt to 45 deg. for miter sanding, Tracking adjustment to keep the belt running true, Removable back plate for sanding belt, Powerful 1 horsepower motor, Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Condition: Used Location: Cincinnati, United States MAX DISC SANDER-GRINDER. 2 HP Motor, 230/460/60/3. MAX Miter Gauge. Table Size: 11" x 27". Approximate Weight: 500 Lbs. SERIAL NUMBER: DS-237. Tilting ... moreTable.
Buy It Now
Condition: For parts or not working Location: Euclid, United States Prices are subject to change. Item is subject to prior sale . Capacity: 24". Unless noted, item has not been tested, and condition is unknown. We reserve ... morethe right to cancel any order. Diversion of any products contrary to United States law is prohibited.
$67.82 Shipping Condition: Used Location: Whitehall, United States 40 Inch 4 Speed Power Wood Lathe Brand New Wood lathes turning capacity: 14" maximum diameter over bed. 40" maximum between centers. Wood lathe ... morepulley system- Four speed. V belts Spindle Speeds: 810 RPM to 3400 RPM Motor- 350 watt. 1400 RPM, 110 volt AC, mounted to headstock. Construction- Headstock. Tailstock, foot, tool rest base, and tool rests are of heavy cast iron. Bed is made of heavy steel tubing. Headstock- The drive spindle is a No. 1 Morse taper. Threaded 3/4" 16. The out bork end of the drive spindle can also be used for large turning and is threaded 3/4" 16, left hand. Tailstock- Slides along full length of the bed and clamps into position at any distance from the drive spindle. The ram has a hand wheel advance of 2 3/8" with positive lock and is fitted with a No. 1 Morse taper. Overall measurements- 14.57" high. 9.45" wide, 59.05" long. We respond to ALL EMAILS. Should you have any issues or questions regarding any item please contact us first before leaving NEUTRAL or NEGATIVE FEEDBACK. You will receive a response within 24 hours. If you don't receive the respond email. Please check your SPAM/JUNK email folder. WE ARE CLOSED ON THE WEEKENDS. FeedBack: If you are considering leaving negative or neutral feedback. Please give us the opportunity to resolve the issue first. Thank you for your consideration Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* Local Pickup Available for Los Angeles Area: DISCOUNT AVAILABLE FOR LOCAL PICK-UP* California residents only* 9.25% sales tax will be added at check out. Shipping and Handling to Lower 48 States: FREE SHIPPING Ground Service. Excluding PO BOX. APO, HI, AK, PR and GU. Additional shipping charge applies to APO. AK, HI, GU, PR and VI, addresses. Please contact seller prior to placing the order. Shipping To Canada: $98.88(1st unit) + $78.00(each additional) Ground Service. International Buyers are respond for all Brokerage. Tax and Duty fees. Local Pickup Available for Los Angeles
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Why Choose VEVOR?. VEVOR 2"x82" Belt Grinder Sander with 2HP Motor 3 Tool Rest Complete Chassis. VEVOR Random Orbital Sander 5 in. Variable Speed Palm ... moreSander 350W w/ Pad & Bag. VEVOR 9" Drywall Sander 850W Vacuum System Folding 6 Speed LED Strip Light.
Buy It Now
Free Shipping Condition: New Location: Tampa, United States With 3 Grinding Wheel Bench Sander and Flat Platen Tool Rest. 1 set Belt Sander Knife Grinder (190238). Belt Grinder Variable Speed Chasses is designed ... morefor professional knives, other cutting tools and machines makers.
Buy It Now
Free Shipping Condition: New Location: Walnut, United States Hook & Loop Sanding Discs. Roll Lock Sanding Discs. Sander Pad & Sanding Blocks. Sanding Sponges. Sanding Sleeves & Drums Set. Features & Benefits of ... more1/2" x18" Non Woven Sanding Belts. Flap Discs. Grit: Fine.
Buy It Now
Free Shipping Condition: New Location: Covina, United States SAND PAPER: PREMIUM ZIRCONIA 35mmx18mmx100pc zirconia material. ARBOR: 7/8". Max Rpm: 8500 Rpm. 7" FLAP DISC PREMIUM ZIRCONIA. FLAP DISC: 7".
Buy It Now
$800.00 Shipping Condition: New Location: City of Industry, United States 【3-in-1 Belt Grinder -- multiple grinding types】The belt sander is equipped with a high-quality abrasive belt with durable wheels, featuring a non-slip ... moredesign and a fast grinding speed. It also accomplishes three types of grinding with only one working arm.
Buy It Now
$2.99 Shipping Condition: New Location: China 3" Nylon Abrasive Wire Wheel Polishing Brush 6mm Shank 80-600 Grit Rotary Tool. 2" 50mm R Lock Grey Fiber Polishing Wheel Discs Roll Buffing Pads 9P 1/4" ... moreShank. 4" Nylon Abrasive Wire Wheel Brush Cup Grinding Wheel Angle Grinder Derusting.
Buy It Now
Condition: Used Location: Newton, United States Central Machinery belt and disc sander from harbor freight. 1hp 110v single phase. Runs okay, good starter machine for light metalwork and woodworking ... morebut I have my doubts about the power rating lol. I put new bearings in it so its a lot smoother than original. Selling it because I'm planning on upgrading Local pickup but I'd be down to meet in the middle somewhere or deliver to local areas if you're cool about it
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States G0864 Variable-Speed 1" x 30" Belt/ 6" Disc Sander. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. The belt ... moresanding table also tilts 0-45° and can accommodate supported work with the platen or freehand contour sanding or sharpening for added versatility.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States H7761 2" x 27" Belt/6" Disc Combo Sander. New to woodworking?. The complete and easy-to-read manual makes it easier to assemble and maintain your sander. ... moreBelt platen size: 2" x 5". Belt Sanding: The 2" x 27" belt sander is ideal for flattening surfaces, removing material, and achieving a smooth finish.
Buy It Now
$30.00 Shipping Condition: New Location: Minooka, United States Disc Sander,Cast Aluminum Table,1 HP. HONEYWELL HOWARD LEIGHT HL400-LPF-INTRO-AM Earplug Dispenser,9 1/4 in D,16 3/4 i. GOULDS WATER TECHNOLOGY 100MC1C1E0 ... morePump,1/2 HP,1 Ph,120/240VAC. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States 50Pcs 2" 50mm Roll Lock Discs Quick Change Die Grinder Sanding Abrasive Disc US. 50X 2in Coarse Surface Conditioning Discs Roll Lock Die Grinder Sanding ... morePads. 50X 2" 80 Grit Zirconia Roll Lock Die Grinder Sanding Grinding Disc Quick Change.
Buy It Now
Free Shipping Condition: New – Open box Location: Denton, United States Constructed from premium quality materials, these flap discs are built to withstand rigorous use, reducing wear and extending the life of the disc. Their ... moredesign promotes even wear, ensuring consistent performance throughout the disc's lifespan.
Buy It Now
Free Shipping Condition: New Location: Sturgis, United States Abrasive Belt Cleaning Sticks. Resin fiber discs are made of a stiff fiberboard (vulcanized fiber) backing, coated with a single layer of resin and abrasive. ... moreThis gives us a competitive edge on pricing and the ability to move inventory quickly.
$16.99 Shipping Condition: Used Location: Riverview, United States In used condition. Used condition. • Great Prices.
Buy It Now
Condition: Used Location: Brookpark, United States POWERMATIC #30A 6" / 12" BELT / DISC SANDER. -- DUST COLLECTOR. We have a loading dock and fork lifts with the ability to load any type of truck. we can ... moreeither use your account number or provide a rate quote.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States G7297 12" Disc Sander. Its 1 HP motor tackles tough jobs with ease, while the spacious 8-1/4" x 17-1/4" cast-aluminum table tilts for angled sanding. ... moreThe complete-and-easy to read manual makes it easier to assemble and maintain your sander.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Search Search by Category ► Air Tools Compressors ► Automotive ► Cordless ► Drywall Lifts ► Generators ► Hand Tools ► Inside The Home ► Masonry ► Outdoor ... moreHeating ► Outdoor Power Equip. ► Pool Equipment ► Power Tools ► Safety Gear ► Tarps ► Welding ► Woodworking ► Other Click an Image to Enlarge Product Details Model: W1828* Condition: NEW MSRP: $360.00* Warranty: 1 Year Warranty* This production style 12" Disc Sander is ideal for shaping and smoothing edges. Squaring end-cuts and truing simple and compound miters. The precision ground cast iron table adjusts for bevel sanding up to 45° and the 1 HP totally enclosed fan cooled direct drive motor spins at 1,700 RPM, which is ideal for wood sanding applications. Uses 12" pressure sensitive adhesive sanding discs. Approximate shipping weight: 62 lbs. W1828 SHOP FOX® 12" Disc Sander Owners Manual, 2-Year Limited Factory Warranty, 30 Day Satisfaction Guaranteed Specifications Approximate shipping weight: 62 lbs. All electrical items are meant for use with 120v power. Unless otherwise stated. Domestic International Domestic(Lower 48 States) $0.00 Canada: $98.63 2nd Day Air: $97.72 Australia: $193.77 Hawaii& Alaska: $97.72 Western Europe: $131.62 Local Pick Up Available: $0.00 Other International Destinations: $193.77 Orders are usually processed and shipped within 24 to 48 hours of receipt of your payment. Most orders are shipped by FedEx Ground. So please provide us with a physical shipping address(failing to do so may delay your order) We may ship an order by a different courier at our discretion(usually larger items require shipping by freight services, orders to military addresses must be shipped by USPS, etc. Average time of arrival is 5-7 days for domestic shipments by FedEx Ground, 7-10 days for domestic shipments by freight truck, and 6-10 business days for international shipments. If you need to receive an order within a guaranteed timeframe, please contact us for rush options and expedited shipping. International Buyers- Please Not
Buy It Now
Free Shipping Condition: New Location: Sturgis, United States Mirka Abrasives. Mirka Air Tools. Mirka CEROS Sanders. Mirka DEROS Sanders. The MR-6, Mirka 6 in.Sander with 3/16" (5mm) orbit is designed for general ... morepurpose sanding. Sander Backup, Backing Pads. Abrasive Belt Cleaning Sticks.
Buy It Now
Condition: Used Location: Cedarburg, United States Powermatic Belt/Disc Sander/Grinder. Belt capable of vertical plane position. Motor: 1.5 hp, 115/230 Volts, 1 ph, 60 Hz. WE'LL DO OUR VERY BEST TO MAKE ... moreIT SO! SPEC'S SUBJECT TO FINAL INSPECTION.
Buy It Now
$400.00 Shipping Condition: Used Location: Bristol, United States Will be adding more pictures soon. If you need single phase, we can install a VFD drive at cost to convert to single phase. Shipping is just an estimate, ... moreso contact me first a quote. It will be shipped on a pallet by truck via freight. Local pickup is always welcomed and we can load. Check out my other listings as well. Thank you for looking
Buy It Now
Condition: Used Location: Santa Fe Springs, United States This 23.625"/600mm Dia.
Buy It Now
Condition: Used Location: Watertown, United States
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States W1676 6" Belt / 10" Disc Combo Sander. The 6" x 48" sanding belt tilts 90° and can be used in both horizontal and vertical positions, or any angle between, ... morebased on your needs. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your sander.
Buy It Now
Condition: Used Location: Centerburg, United States Unit marked Mach. Once property of the Navy. Badged with a Semco plate. Unit runs great and the wheel will spin long after it has been powered off, indicating ... morethe bearings are in good shape. Unit is on original steel wheels with the rear one on a hinge for a more stationary machine when desired.
Buy It Now
Free Shipping Condition: New Location: Houston, United States Detail Sander Sandpaper. Cut-Off Wheels&Grinding Wheels. Hook & Loop Sanding Discs. Sanding Belts. Sanding Sponges. Sanding Sleeves & Drums Set. Weld ... moreDressing, Structuring, Grinding, Deburring, Smoothing, Blending, Surface Finishing.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States Roll Lock Sanding Discs. Hook & Loop Sanding Discs. Sander Pad & Sanding Blocks. Sanding Sponges. Sanding Sleeves & Drums Set. Reinforced Flap Discs: ... more72pcs small 24x18mm cloth backing aluminum oxide sanding discs are bonded tightly on the plate.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States JET 577003. Deluxe miter gauge, removable platen and cast iron construction are among the features that draw pros to this JET machine. 8, Disc Speed (RPM) ... more1725, Belt Size (In.). 1 x 42, Belt SFPM 3000, Disc Table Size (In.).
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Use: Work with your sandpaper for wood, furniture, desk, wardrobe, paint surface. 1PCS Adjustable Radius Flex Longboard Hand Sanding File Block Hand Grinder. ... more3in1 Handheld Mini Cleaner Cordless Car Vacuum Cleaner 9000pa Strong Suction.
Buy It Now
$100.05 Shipping Condition: Used Location: Salisbury, United States Dirty but functional Powermatic disk sander base. Has pulley, bearings, disk, (not shown), guard, and base casting. Bearings sound good.
Buy It Now
Free Shipping Condition: New Location: Sturgis, United States Dynabrade 50605 5" (127 mm) Dia. Non-Vacuum Disc Grip Long Nap Hook & Loop. Dynabrade Belts. Sanding Pads are perfectly weight-mated to Dynabrade tools, ... morefor achieving consistent swirl-free finishes.
Buy It Now
Condition: Seller refurbished Location: Minden, United States The platen is like new with an unworn outside corner, important for pattern makers. BTW, Burr King copied the MAX 20” ! This is An Exceptional and an ... moreoriginal MAX. IF YOU DON’T SEE SAN JOSE ON THE CASTINGS it’s NOT an original MAX and most likely Chinese.
Buy It Now
Condition: New – Open box Location: Coffeyville, United States COMBINATION SANDER. DISC SPEED: 1960 RPM. 6" BELT AND 12" DISC. BELT SPEED: 2850FT/MIN. BELT ORIENTATION: VERTICAL.
Buy It Now
Free Shipping Condition: New Location: Sturgis, United States Mirka Brand# 105- 5" DA PSA Sanding Vinyl Faced Backup Pad with 5/16 x 24 thread- Brand New- price is for 1 backup pad. Mirka PSA back-up pads are ... morea top quality molded polymer construction. These backup pads work great with the Dynabrade Random Orbital Sanders we sell in our store! PSA: The specially treated vinyl pad face offers excellent adhesion and ease of removal without paper delamination or tearing. Free Shipping on most items within the Continenal USA. If shipping will be charged. It will be clearly stated in the shipping section of the listing. We do combine shipping on items with shipping charges to save you extra cash. Free shipping items ship via UPS or US MAIL at our discretion. In some instances we can overnight items. If you require expedited shipping, contact us immediately at 888-651-7263 to see if the item qualifies. We ask that payments be made within 48 hours of the end of the sale to speed the process of packing and shipping the items to you. We accept payments via Paypal. Visa, Mastercard, Discover or American Express. If you have any problems making your payment, please contact us as soon as possible for assistance. We are YourSandingSource. The online division of AB's Gloves& Abrasives, Inc located in Sturgis, Michigan. We have been in business as a brick and mortar facility for nearly 30 years and sell millions of dollars worth of industrial supplies to the RV Manufacturing industry in Elkhart, Indiana. This gives us a competitive edge on pricing and the ability to move inventory quickly. We have a 20,000 square foot warehouse and over 8,000 different unique items in our catalog. There are 18 employees here working hard to make sure your orders get accurately picked and professionally packed up and shipped out to you efficiently. We look forward to working together with you to help you accomplish your needs. YourSandingSource and A.B.s Gloves& Abrasives appreciate your business. If you need to reach us to ask a question about our eBay items. You can either email us throug
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Model 1791291K. Powermatic 31A Belt/Disc Sander, 6"x48", 12", 1.5HP 1PH 115/230V Manual Switch. Motor Phase 115, 230. Belt and disc tables are precision ... moreground cast iron with miter slots. Belt table tilts down to 45ø, and can be set for beveled and mitered angle sanding.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States Belt Grinder,1/2HP,120/240,5.0/2.5A,1x42. Feature front-mounted On/Off switch and full belt guard with dust collection port. Belt is adjustable for use ... morein vertical or horizontal position. -, Disc Speed (RPM) -, Belt Size (In.).
Buy It Now
Free Shipping Condition: New – Open box Location: Houston, United States LOT OF 8 FLASP DISC. Fiberglass backing plate provides rigidity under pressure.
Buy It Now
Condition: Used Location: Piasa, United States Three phase motor is 2 hp 230/460V, 1150 rpm.
Buy It Now
Condition: Used Location: Leesburg, United States Uxcell M6 x 16mm Handle Adjustable Clamping Lever Thread Push Button Ratchet Male Threaded Stud Knobs (copy paste into your browser). Everything works ... moreas it should. With a 1 HP motor, this is a real Work Horse.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Belt platen size (In.). Both tables tilt to 45 deg. for a variety of sanding and sharpening applications and the adjustable miter gauge ensures accurate ... moreangle settings. Horsepower 1/3 HP. Belt size (In.).
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States T33256 4" x 36" Belt / 6" Disc Combo Sander. The easy-to-use T33256 4" x 36" Belt / 6" Disc Combo Sander quickly smooths wood surfaces. The T33256 features ... morean adjustable miter gauge, work table angle scale, and a rear 2-1/2" dust port.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States G0967 20" Variable-Speed Disc Sander. Disc speed: Variable, 500–1800 RPM. None of the carriers we work with will move freight up or down stairs. A sturdy ... morecast-iron table provides essential support during sanding and is equipped with X- and Y- miter slots and a miter gauge that works in both directions to guide your material.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States Jet 708595 JSG-96. Benchtop 6" x 48" Belt/ 9" Disc Sander, 3/4HP 1Ph, 115V The unique JSG-96 Benchtop Sander combines a 9" disc and ... more6" x 48" belt for workshop versatility. While small and compact. The JSG-96 offers industrial 3/4 HP power while taking up a small footprint on your bench. A quick-release belt tension lever makes belt changes fast and easy while a quick-lock dust cover allows fast disc changes. Features: Large cast iron table has preset stops at 90� and 45� to let you use the belt sander vertically. Horizontally or anywhere in between Exclusive dual thumbscrew belt tracking adjustment locks to keep belt on track during use Graphite covered steel platen runs cooler increasing machine and belt life Specially designed belt guard allows full use of the 6" belt width and length Drive drum is rubber-coated for a better grip on the sanding belt resulting in less slippage Tracking adjustment knob with quick-lock handle keeps belt on track during use Quick-release belt tension lever makes belt changes fast and easy Quick-lock dust cover allows fast disc changes Single 4" dust port on the back of the base collects dust effectively from both the belt and disc Powerful 3/4HP motor easily handles the toughest sanding operations Built-in handles for easier portability Specifications: Style(Type) Benchtop Disc Diameter(In. 9 Disc Speed(RPM) 1725 Disc Table Tilt(Deg. 10 Up. 45 Down Disc Table Size(L x W) In. 12 x 7-1/2 Sanding Belt Size(L x W) In. 48 x 6 Belt Speed(RPM) 2258 Belt Table Tilt(Deg. 10 Up. 45 Down Belt Table Size(L x W) In. 11 x 5-1/2 Dust Port Outside Diameter(In. 4 Motor Power(HP) 3/4 Motor Phase(PH) 1 Motor Voltage(V. 115 Prewired Voltage(V. 115 Motor Amps: 11 Height: 16.1000 Length: 28.2000 Weight: 100.0000 Width: 24.9000 Manual This item is covered by JPW's 5 Year Warranty and Jet's Red Assurance Protection Plan. JPW Industries. Inc. warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers lo
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States H8192 1" x 42" Belt / 8" Disc Combo Sander. The H8192 1" x 42" Belt/8" Disc Combo Sander tackles detailed sanding tasks with finesse. Its compact size ... moremakes it ideal for use alongside bandsaws and scroll saws, allowing you to.
Buy It Now
Free Shipping Condition: New Location: Englewood, United States The Delta 12 in. An integral dust collection fan draws dust away from table and into hose for cleaner sanding operation. The machine has a cast-iron base ... morewith pre-drilled base holes for easy bench mounting.
Buy It Now
Free Shipping Condition: New Location: Sturgis, United States VSM ZK713X 5" PSA Disc 36 Grit. Qty. 50 per Box Heavy X-weight Polyester Backing Zirconia Alumina Extended Lifetime Aggressive Cutting Power Cool ... moreCut Uses: Abrasive Planing and Wood Panels Free Shipping on most items within the Continenal USA. If shipping will be charged. It will be clearly stated in the shipping section of the listing. We do combine shipping on items with shipping charges to save you extra cash. Free shipping items ship via UPS or US MAIL at our discretion. In some instances we can overnight items. If you require expedited shipping, contact us immediately at 888-651-7263 to see if the item qualifies. We ask that payments be made within 48 hours of the end of the sale to speed the process of packing and shipping the items to you. We accept payments via Paypal. Visa, Mastercard, Discover or American Express. If you have any problems making your payment, please contact us as soon as possible for assistance. We are YourSandingSource. The online division of AB's Gloves& Abrasives, Inc located in Sturgis, Michigan. We have been in business as a brick and mortar facility for nearly 30 years and sell millions of dollars worth of industrial supplies to the RV Manufacturing industry in Elkhart, Indiana. This gives us a competitive edge on pricing and the ability to move inventory quickly. We have a 20,000 square foot warehouse and over 8,000 different unique items in our catalog. There are 18 employees here working hard to make sure your orders get accurately picked and professionally packed up and shipped out to you efficiently. We look forward to working together with you to help you accomplish your needs. YourSandingSource and A.B.s Gloves& Abrasives appreciate your business. If you need to reach us to ask a question about our eBay items. You can either email us through the eBay website or you can call customer service toll free at(888) 651-SAND(7263) Returns: No questions asked within 14 days as long as the item is returned in the same condition is was originally sent. Q. What is the
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States W1712 6" x 48" Belt/12" Disc Combo Sander. The heavy-duty W1712 6" x 48" Belt/12" Disc Combination Sander uses a 6" x 48" belt, a 12" disc, and a 1-1/2 ... moreHP motor to tackle your tougher sanding operations.
Buy It Now
$69.95 Shipping Condition: Used Location: Lancaster, United States Delta SA446 Shopmaster 4" Belt/6" Disc Sander 1/3HP 120V 3450RPM 1PH. Please see photos .Comes as is. Everything included in photograph.Thanks for viewing. ... moreThe belt came off when testing the tightening and loosening mechanism. The sand disc needs replaced also. Works well as it should Thanks
Buy It Now
Free Shipping Condition: Used Location: Crown Point, United States Here is Dynabrade 51225 right angle disc sander that is in excellent condition. It uses 2" sanding disks, has. 4 HP and spins at 12,000 RPM. has been ... moreused???. Obviously not very much. I really don't think that it has ever been used.
Buy It Now
Condition: Used Location: Farmington, United States Used fully functioning 20" Industrial STATE Disc Sander. Great Sander.
Buy It Now
Free Shipping Condition: New Location: Bellingham, United States G0843P 12" Double Disc Sander - Polar Bear Series. G0843P 12" Double Disc Sander. The two sanding discs allow you to work with different grit sizes for ... moreboth coarse and fine sanding. The G0843P is equipped with a powerful 3/4 HP motor that turns both precision-machined aluminum sanding discs at 1720 RPM.
Buy It Now
Free Shipping Condition: New Location: Naperville, United States Browse Categories. Jet 577004 J-41002 2" X 42" Bench Belt and Disc Sander 3/4HP 1PH 115V- N/A. Technical Specs ADA: Bulb Base: Bulb Type: Collection: ... moreConfiguration: Depth: Finish: N/A, Handle Type: Belt/Disc Sanders, Height: 23.1, Installation Type: Length: 16, Light Direction: Material: Number of Bulbs: Weight: Series: J, Specifications: Suggested Room Fit: Theme: Type: Power Tools, UL Listed: Wattage: Watts Per Bulb: Width: 16.7, Product Details. Product Features: Another Jet combination bench belt and disc sander designed to deliver the superior finish. The design of this machine permits sanding. Grinding and finishing of outside curves or odd-shaped pieces. heavy-duty base, cast construction and cast iron tilting table means you are getting the very best Jet has to offer. Jet tools is committed to being the tool supplier you can depend on for the epitome of quality. Innovation and service. Jet tools has worked hard to make this a reality that has been ongoing since they introduced their products more than 50 years ago. Tilting table capability adds flexibility of 45° forward and 15° backward on positive lock rack and gear, Hinged idler wheel cover, Abrasive belt unit does the work of a jig saw. Coping saw or hand file while removing material and finishing at the same time, Allows for sanding. Grinding or finishing of outside, curves or odd shaped work pieces on the belt, Delivers sharper. Faster cutting action; easy belt changes with a variety of grit belts, keeps the machine cool, so one can complete a wide range of jobs, When using non-woven synthetic belts. The operator can blend, polish, buff or finish metal surfaces in addition to defusing wood surfaces, Deluxe miter gauge, Cast iron tilting table, Cast construction, Heavy-duty steel base and rubber feet, Removable platen, Dust deflector and chute, Warranty: 1 year, Height: 3.8" Width: 7.3" Length: 18.9" Product weight: 18.9 lbs, Belt speed: 3.100, Belt size(W x L) 2" x 42" Blows per minute: 1.800, Stroke leng
Buy It Now
Free Shipping Condition: New Location: Whippany, United States 10 pieces of each grit: 80/ 100/ 180/ 240 /600 /800 /1000/1200 /2000 /3000, total 100 pieces. Include 10pcs of each 80#, 100# ,180#, 240#, 600#, 800#, ... more1000#, 1200#, 2000#, 3000#, total 100pcs. The sanding discs kit include 1pc soft foam buffering pad.
Buy It Now
Free Shipping Condition: New Location: Whippany, United States 10 pieces of each grit: 80/ 100/ 180/ 240 /600 /800 /1000/1200 /2000 /3000, total 100 pieces. The sanding discs kit include 1pc soft foam buffering pad. ... moreInclude 10pcs of each 80#, 100# ,180#, 240#, 600#, 800#, 1000#, 1200#, 2000#, 3000#, total 100pcs.
Buy It Now
Condition: Used Location: Bergen, United States Local Pick Up Available.
Buy It Now
Free Shipping Condition: New Location: Minooka, United States Store Categories. Click to close full size. For warranty information. NORTON 66261131580 Disc. Sanding, 5In, P150G, PK100. NORTON. Item Specifics. Item. ... moreHook-and-Loop Sanding Disc. Type. CAP Code. A275. Color. Champagne. Dia. In. 5. Grit. 150. Item. Hook-and-Loop Sanding Disc. Max. RPM. 10.000. Abrasive. Aluminum Oxide. Backing. B Weight. Attaching System. Hook and Loop. Grade. Fine. Series. A275. Disc Dia. 5" Backing Weight. B. Abrasive Type. Open Coat. Water-Based Stearate, Latex Impregnated. Abrasive Material. Aluminum Oxide. Backing Material. Paper. Package Quantity. 100. Shipping A $5 shipping and handling fee is charged on orders totaling less that $25 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $25 or more before tax. Not all products qualify for the above Shipping Policy. Additionally. Standard shipping rates will apply for all orders to Alaska and Hawaii. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer services hours are Monday through Friday from 7am to 7pm(central) Include a copy of the original order confirmation or packing slip with your RA paperwork as proof of purchase. Returns received at Zoro without a RA number may be assessed a 15% restocking(processing) fee that will be deducted from any credit due. About Us Zoro has a simple mission. We help small business stay competitive! We do this by offering great products at supe
Buy It Now
Free Shipping Condition: New Location: Houston, United States Detail Sander Sandpaper. Cut-Off Wheels&Grinding Wheels. Hook & Loop Sanding Discs. Sanding Belts. Sanding Sponges. Sanding Sleeves & Drums Set. Weld ... moreDressing, Structuring, Grinding, Deburring, Smoothing, Blending, Surface Finishing.
|
|
|
|
KALAMAZOO INDUSTRIES 12" PEDESTAL DISC SANDER 115/208-230 1HP
12" DISC SANDER. NEEDS NEW PLUG. BALDOR 1HP MOTOR. 115/208-230 VOLT 1.725 RPM. Any questions please email or feel free to call Delaney's Surplus at 608-643-8009 If buying and needs freight please email your zip code and if it is a business with a dock. Closed Tuesdays and Wednesdays.
|
|
|
Vintage Belt Disc Sander. 6" wide belt, 9" diameter disk. It works NO MOTOR
Vintage used Combo disk/belt sander. It does not have a motor. Need to be tuned up it has been sitting for 20-30 years. sanding axel spinns free. Size 30"x 20" x 12" O`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13df4514ad1-0xf7-
|
|
|
Jet Model JSG-6DCK Combination Belt & Disc Sander
1) Used Jet Model JSG-6DCK Combination 6" x 48" Belt/12" Disc Sander 6"x48" Belt 12" Disc 1.5 HP Motor(2) Cast Iron Rest Plates Steel Stand FOR MORE INFORMATION PLEASE CALL JEFF@ 888-998-4440 OR E-MAIL INFO@MACHINERYNETWORK.COM.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13dfad32f4d-0xff-
|
|
|
Disc Sander MEMA111000688
Disc Sander MARKDOWN! Was: $230 Now: $149 Disc Sander Disc Sander Machining Equipment and Tools Used Disc Sander Surplus Used. MEMA111000688 Disc Sander. Buy It Now Manufacturer, Unknown, Type, Machining Equipment and Tools, Item Condition, Used, Material, Serial# V/H, SKU, MEMA111000688, Type, Disc Sander, Buy It Now All items sold are shipped from our Baton Rouge. LA location unless otherwise specified. Actual shipping/freight cost is calculated based on your location. We sell unique items and understand that each customer's shipping needs vary. Shipping/freight details will be determined at the time of purchase and verified with the customer before delivery. For the purpose of obtaining a shipping estimate. Our zip code here is 70815. Buyer pays all shipping cost. All items are sold“AS-IS. WHERE-IS” Items are described to the best ... moreof our knowledge. However, we the Seller make no guarantees regarding accuracy, errors or omissions in the item description and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability for a particular purpose of any item. Payment must be made within 5 days of the sale close date. We accept Pay Pal. Visa, MasterCard and Wire Transfers. 1-877-658-8218 Universal Industrial Assets 11150 S. Choctaw Drive Baton Rouge. LA 70815 Phone: 1-877-658-8218 Universal Industrial Assets is a full service solutions provider offering a range of capabilities that include buying. Selling, consignment, online and sealed bid auctions, as well as complete asset recovery programs. Centrally located in Baton Rouge. LA and in the heart of America’s chemical corridor we have over 40,000 square feet of covered warehouse space with much of our large inventory ready to ship immediately. | | | | © Universal Industrial Assets 2011—2012. Powered by The free listing tool. List your items fast and easy and ma
|
|
|
Dynabrade 50321 4 1/2"- 5" Pneumatic Pistol Grip Disc Sander .7 HP 11,000 RPM
Dynabrade 50321 4 1/2" 5" Pneumatic Pistol Grip Disc Sander.7 HP 11.000 RPM. This sander is in nice condition. And works great, does not come with the handle. Shipping to the US only. Thank you for looking at this auction. Posted with
|
|
|
CRAFTSMAN 7" COMMERCIAL DISC SANDER
Craftsman 7" Commercial Disc Sander made in the USA by Sears. Roebuck and Co. Simpsons- Sears LTD. Develops 1 hp. 100% Ball Bearings 7 inch Disc Capacity 4400 RPM Free Speed 110-120 volts a.c-d.c. 25-60 Cycles 8.0 Amps Model: 315.7762 This heavy duty commercial sander runs great and will really get the job done. Sander is a comfortable 16" long and 4" wide. Handle will switch to either left or right side of sander. Has a trigger lock button. Has a long 10' chord. Posted with On Mar-10-13 at 13:17:32 PDT. Seller added the following information:
|
|
|
DELTA 1" belt 5" disc sander buffer
Delta 1" belt 5" disc sander I am not very familiar with this item. My dad used it in his dental lab for something. He recently retired and gave this to me to sell. It does work properly and that is about all I know. feel free to ask any specific questions and i will do my best to answer. It needs a good cleaning and looks like it may be missing a little face plate or something. again. I am clueless so please view the pictures and ask questions before bidding.
|
|
|
Powermatic Disc Sander Grinder Pedestal Stand with Chute
Powermatic Disc Grinder Pedestal Stand with Chute. May work with Delt a Rock we ll. Jet, Burr King, Wilton or others, made for 12" Powermatic model 35 Di sc Sander Grinder. Dimensions are 15" x 16" x 33" a nd mounting holes are 8" on c enter. It's hard to tell from the pics but the main column is tapered from roughly 7.5" wide at bas e to 5.5" wide at top. If you have any questions. Be sure to ask. Weighs about 45lbs with no packaging.
|
|
|
DELTA 12" disc sander de-burrer
Im selling this for a friend. Im told that it works as it should. It looks to be in good working condition. Local Pick up or I can put on a small pallet and load into a freight truck but buyer is responsible for setting up the shipping. Pick up in Quakertown, PA 18951. About 35 miles north of Philadelphia. Sander plus packaging weighs about 115 lbs. PayPal Verified Selling on ebay since 2002 Please contact me immediately with any problems with an item before leaving negative or neutral feedback. I will make it right. Please read before bidding or buying- SORRY. I DO NOT ship out of the United States! I combine shipping; if you purchase multiple items please request a total at checkout. Please read my entire seller’s disclosure then buy with confidence HONESTY IS MY#1 POLICY- Overview- Most of what I sell are used items and may have some normal ... morewear and tear. Any defects beyond this I will describe and/or show them in the pictures. Some items that I’m unable to test or I’m selling on behalf of someone else and don’t know enough details about an item. In these listings I will disclose this lack of information and write it blatantly in the item description(e.g. not sure of its working condition” This does not mean item does not work or is broken and I will still refund your payment if item is defective. If there is ever a problem with an item I will do everything in my power to make it right. I am not out to try and pull any fast-ones on anybody but mistakes although rare do happen. Please contact me immediately with any problems with an item before leaving negative or neutral feedback, I will make it right. Questions about an item– Please allow 24 hours for me to respond to any questions as I am not able to get to a computer during the day and sometimes I don’t work a normal schedule. Please read the description and look at the pictures carefully as the answer to your question may be in the description and/or pictures. Payments– Please pay for items in a timely manner. I prefer paypal for shippable i
|
|
|
WYSONG DISC / SPINDLE SANDER 36" DISC 5 SPINDLE SIZES MODEL 309
USED WYSONG DISC/SPINDLE SANDER MODEL-309 Specifications Disc size: 36” diameter with tilting table. 5 HP Disc table size: 15” x 44” Spindle table size: 26” x 30” 3 HP Voltage: 480/3/60 Dimensions: 74” x 48” x 85” Weight: 1.750 lbs Equipped with: ¨ 5 New Sanding Discs ¨ 5 Spindle Sizes ¨ Forward& Reverse on disc We will ship this item and cost will vary by buyer location. If you need a shipping rate just let us know. Please contact us. 800 899 8182 ext. 208 Check out my! PLEASE READ! Do not answer any second chance offers or any other offer to buy this machine outside of Ebay. Scam artists are sending our bidders fake emails that look like official Ebay messages. If you have any questions about emails sent to you please call and verify that it came from us. 800 899 8182 ext.208 Be sure to add us to your favorite sellers ... morelist for daily additions! Loaded on truck– No charge For more specs on this machine and others please visit www.westbrook-eng.com Payment is expected within 7 days of auction end. Buyer is responsible for all freight charges. 6% Michigan sales tax where applicable. Machines will need to ship on a flatbed truck. If planning to ship in an enclosed trailer it will need to be crated. Crating charges are extra. If you have any questions or if you would like to schedule an inspection please contact us here in Warren. Michigan toll free at 1-800-899-8182…ext.208…Good Luck and Happy Bidding. Provisions: It is the user’s responsibility to provide proper safety devices and equipment to safeguard the operator from harm for any particular use. Operation or set up, and to safeguard adequately the machine or machines to conform to all Federal, State and Local Government Safety Standards, and all Industry Safety Standards. MDNA return privilege applies to all machines(unless sold as-is) We will accept(within 30 days of shipment) any machines and equipment. Freight prepaid, for refund of the purchase price if proven mechanically unsatisfactory; or repair at dealer’s option. Machines are shipped
|
|
|
Floor sander disc for clarke edger 7 inches
These are used so both they are sold together sold as is no returns please and if you have any questions please send me a message Posted with
|
|
|
ROCKWELL DELTA COMBINATION 6X48 BELT AND 12" DISC SANDER WITH TILTING TABLES
BUY IT NOW NO WAITING. ROCKWELL DELTA COMBINATION 6X48 BELT SANDER AND 12" DISC SANDER. WORKS GOOD. HAS TWO TILTING TABLES NO MARKS OR RUST. 1.5 HP 230-460 VOLTS 3PH. MISSING TOP COVER FOR BELT SANDER DOESN'T AFFECT ITS ABILITY TO OPERATE. YOU GET WHAT IS PICTURED AND NOTHING ELSE. PAYPAL TAKEN. QUESTIONS CALL JUSTIN 619-253-6499. I SELL A LOT OF DIFFERENT ITEMS AND AM NOT A EXPERT ON THEM I MAY NOT NO IF SOME THING IS MISSING OR COMPLETE AND IT IS YOUR RESPONSIBILITY TO DETERMINE THAT AND I WILL NOT BE HELD RESPONSIBLE OR LIABLE IF SOME THING IS MISSING OR NOT COMPLETE. READ AD COMPLETELY. IF I DON'T RESPOND TO YOUR EMAIL YOUR QUESTION WAS ANSWERED IN THE AD OR YOUR SPAM FILTER WAS ON. LOCAL PICK UP WELCOME. FOR LARGE ITEMS EMAIL FOR SHIPPING COST. CHARGE $ 50.00 PACKAGING COST. QUESTIONS CALL JUSTIN 619-253-6499. BY BIDDING ... moreYOU AGREE TO ALL OF THE TERMS AND CONDITIONS. BY BIDDING YOU ARE INTERRING INTO A LEGAL AND BINDING CONTRACT AND ARE EXPECTED TO PAY. YOU ARE RESPONSIBLE FOR ALL LEGAL FEES AND EXPENSES INCURRED COLLECTING THE MONEY OWED. IF DEFAMATION OF CHARACTER HAPPENS YOU ARE RESPONSIBLE FOR ALL ATTORNEY FEES AND EXPENSES. IF MAILING P0STAL M0NEY 0RDER 0NLY SEND TO JUSTIN WOOLSEY. 1155B POGO ROW, SAN DIEGO CA 92154. TYPE YOUR NAME, ADDRESS, PHONE NUMBER, AND ITEM NUMBER. AND IF YOU WANT SHIPPING INFORMATION INCLUDE YOUR EMAIL ADDRESS. WHILE DESCRIPTIONS ARE BELIEVED TO BE ACCURATE THE SELLERS MAKE NO WARRANTIES OR GUARANTEES. EXPRESSED OR IMPLIED, AS TO THE GENUINENESS, AUTHENTICITY OF, OR DEFECT OF ANY ITEM(S) BEING SOLD AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES, INCLUDING WITHOUT LIMITATION ANY PICTURE, DESCRIPTIONS OR OTHER INFORMATION RELATING TO THE ASSETS.ALL ITEMS ARE SOLD ON AN AS-IS WHERE IS AND WITH ALL FAULTS BASIS. THE SELLER MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY AND VALUE OR CONDITION OF THE GOODS OR ITS SUITABILITY FOR ANY USE. SELLER EXPRESSLY AND SPECIFICALLY DISCLAIMS, WITH OUT LIMITATION, ANY
|
|
|
WILTON 6'' x 10'' COMBINATION DISC / BELT SANDER 4210 with DUST COLLECTOR
WILTON 6' x 10' COMBINATION DISC/ BELT SANDER with DUST COLLECTOR- WILTON 6' x 10' COMBINATION DISC/ BELT SANDER with DUST COLLECTOR INVENTORY# 5671-K_425 MODEL: 4210 S/N: 3070125 SPECIFICATIONS: BELT: 6 x 48 DISC: 10 BELT SPEED: 1650 SFPM BELT TABLE SIZE: 6" W x 10 1/2" L DISK SPEED: 2100 RPM DISK TABLE SIZE: 7 1/2" x 13" TABLE SLOTS: 5/8" TABLE TILT: 45° MOTOR: 1 HP/ 1 PHASE 115 VOLTS OVERALL DIMENSIONS OF FINISHING MACHINE: 23" W x 26" DEEP x 61" H EQUIPMENT INCLUDED: CABINET-STYLE DUST COLLECTOR THIS MACHINE IS BEING SOLD AT A LIQUIDATION AS IS. WHERE IS NOTE: PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE NEW REPLACEMENT COST WITH DUST COLLECTOR: $ 2.000.00 SHOP MORE SANDERS HERE! CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us ... moreat 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RETURNS Returns will not be accepted without prior approval. If you need to make a return. Please contact us before you ship the merchandise back so we can issue you a Return Merchandise Authorization(RMA) number. All items are sold with the best intentions and most complete description available. PLEASE ASK QUESTIONS BEFORE BIDDING! Buyer must pay for return shipping. RUN THREE PHASE MOTORS WITH SINGLE PHASE POWER Use a
|
|
|
510-491 Ohio Forge 4" Belt - 6" Disc Combo Sander - Clean & Fully Functional!
In Great Condition! Clean& Fully Functional! 510-491 Ohio Forge 4" Belt- 6" Disc Combo Sander 120V 1/3HP 2450 RPM Can you believe our price? Packod erm Industrial- Eliminating pack rats one sell at a time! g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13e04b73bc8-0xf3-
|
|
|
DELTA MOTOR cover door FROM BELT DISC SANDER 31-730f
DELTA MOTOR cover door FROM BELT DISC SANDER 31-730f USED DELTA MOTOR cover door FROM BELT DISC SANDER 31-730f. THE door WAS TAKEN OFF OF A DELTA BELT DISC SANDER MODEL 31-730F PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE door.
|
|
|
Price Reduced DoAll 12" Disc Sander Grinder Polisher Belt Powermatic
This is a nice DoAll 12" Disc Sander. Runs great. Wired for 230 volt/ 3 phase electric. Buyer pays all shipping. $50 fee to skid/crate for carrier shipment. Ohio Sales Tax Rules Apply. Payment must be received within 5 days of close of sale. Sold AS IS
|
|
|
Master 24 Inch Disc Sander/Grinder SN 6144
MASTER 24 IN. DISC SANDER/GRINDER. SN: 6144 New 1991 Model: R Specifications: Motor 3 HP Electrics 230/460/3/60 RPM 1725 Drive Multiple V-Belts Disc Boiler Plate Steel 24 in. diam. X ½ in. thick Disc Speed 1150 RPM Bearings Heavy-duty ball bearings@ Front& rear of shaft Table. Box type 13 x 30 in. Left and Right Extensions Floor Space Base is 33 x 33 in. Approx. weight 780 lbs. Normalized. Cast iron, Normal position is 37 inches from the floor. May be 11 inches to within 26 inches of the floor by means of counter balancing springs, exposing full surface of disc. A Vernier protractor permits setting within 10 minutes of 1 degree. Table has a milled slot 5/16 x 1 inch the full length of the table and parallel to face of disc. A sturdy. Accurate grinder with exceptional capacity and unusual flexibility: Table tilts for angular grinding ... moreor sanding; Table moves up or down; Reversing disc operates in either direction. Easy, accurate settings. Connection for dust collection. The Master 24 inch Disc Sander/Grinder is designed for today’s need for speedy, accurate grinding of wood, metal and plastic. For certain applications it can be used on a production line. Proper jigs greatly increase its utility. Several outstanding features have been built into the Master 24 inch Disc Sander/Grinder. The reversing disc permits efficient grinding of right or left hand jobs. The exclusive Master centering pin saves time when changing abrasives as it accurately centers the abrasive discs as they are being attached to the machine. Two heavy-duty springs counter balance the work table, thus enabling the operator to adjust the table to any desired height quickly and with little effort. Shows immaculate. Inv.3736) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: a handling/loading charge of $100; and the ac
|
|
|
DELTA SHOPMASTER MODEL SA446 4" BELT 6" DISC SANDER W/ MANUAL
This is in very nice used condition and works great and comes with the original manual.
|
|
|
MAX Universal 24" Pedestal Disc Sander & Grinder 24SDP w/Debris Blower 460V/3PH
SKU: 2359802 A: 0013000000CXCfg O: 0065000000MjN90 PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a MAX Universal 24" Pedestal Disc Sander& Grinder 24SDP w/Debris Blower 460V/3PH. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: MAX Universal Model: 24SDP Type: Pedestal Disc Sander& Grinder Serial No: ... more96301 Features/Specifications: Disc Size: 24" diameter Table Size: 12" x 31.5" Table Tilt: +/45 deg. Adjustable height Baldor Motor: 2 HP- 208-230/460V- 6.7-6.6/3.3A 1140 RPM- 60 Hz- 3 PH Wired for 460V Blower Motor(blower) 1/3 HP Debris collection bag Power cabinet Dimensions& Weight: Overall Dimensions(as shown) L 32" x W 38" x H 52" Shipping Weight: 575 lbs Condition: Good- working at time of decommission Normal wear from previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos an
|
|
|
VERTICAL BELT SANDER PLANS FINISH SAND DISC EZ 2 BUILD
Belt Disk Sander Plan Up for bid is an Original plan from a vintage magazine. Three pages total. Not all pages shown. Below is a picture of the exact article you will receive. Details how to make your own vertical belt sander. Its very simple to do. You receive the original article. Thank you Shipping is combined on multiple items to save you money. 29
|
|
|
GOULD POWERMATIC 12" DISC SANDER #35B
Hello! Up for sale is this GOULD POWERMATIC 12" disc sander. 3-phase; 480v HP; 600v~30a. It's in good. Working condition and ready to be used. Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13e0a5480c6-0xff-
|
|
|
Oakley 26in Table Disc Drum Sander No 202
Oakley 26" Table Sander No. 202 Specifications- Model: OAKLEY 202- Disc Size: 26" Spindle: Single- Motor: 5 HP- 3 Phase#3038(JK)1/25/11 Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of ... moreitems we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. Freight Shipping: Freight Shipping is highly variable in costs over time. Please contact us before paying for your item so we can get you the best rate available at the time and send you an invoice reflecting the savings. We get very good shipping rates and are normally much cheaper than eBay’s freight calculator. Freight Shipping Requirements: Freight shipping requires complete contact information including: Company Name. Individual Receiver, Complete Address, and a Contact Phone Number. We will also need to know if you are a business with a dock and/or forklift for unloading. We also need to know if you are a business with a dock and/or forklift to unload the freight truck. If you are not a business and/or are residential there will be additional charges. If you do not ensure we are suppli
|
|
|
DELTA 12" disc sander TOP BELT GAURD FROM BELT DISC SANDER 31-730f
DELTA 12" disc sander TOP BELT GAURD FROM BELT DISC SANDER 31-730f USED DELTA 12" disc sander TOP BELT GAURD FROM BELT DISC SANDER 31-730f. THE GAURD WAS TAKEN OFF OF A DELTA BELT DISC SANDER MODEL 31-730F PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE GAURD.
|
|
|
3M Disc Sander Disc Sander 1hp Model 20232
YOU ARE BIDDING ON THE FOLLOWING ITEM- USED FOR SHORT TERM USE 3M 20232 COMES WITH 2 WRENCHES AS SEEN IN PIC USA SHIP AND HAND $ 32.10 CDN MUST PAY HST TAXES NO RETURNS OR EXCHANGES. PLEASE MAKE SURE ITEM IS SUITABLE FOR YOUR NEEDS.
|
|
|
NICE!! JET 20" DISC SANDER MODEL JDS-20-3 STOCK NO.708588
This is a nice. Clean, 20" JET DISC SANDER in excellent condition! Item can be tested before buying. MODEL: JDS-20-3 S/N: 9060001 STOCK NO. 708588 MOTOR: 2HP. 3Ph 230/460V Prewired 230V Tilting table capability adds flexibility of 45 degrees forward and 15 degrees backward on positive lock rack and gear. Reversible rotation" Works smooth. Nice machine! GOOD CONDITION& APPEARANCE* COMES AS SHOWN ON PICTURES This item can be picked up in Upland CA or shipped by freight company. Buyer responsible for shipping and handling cost. Send a message to get a shipping quote. Posted with eBay Mobile
|
|
|
6" X 48" Powermatic Belt & Disc Sander
6" X 48" Powermatic Belt& Disc Sander Serial Number: 9230029 Equip and Specs: Model: 30B Belt size: 6" x 48" Disc size: 12" Belt table: 7" x 17" tiling Disc table: 7" x 17" tilting Approximate size: 30" x 37" x 56" Includes 2 additional new sanding belts Elect Specs: 1-1/2 HP; 220/440/3/60 Condition: Very Good Location: 26470 Lakeland Blvd. Euclid, OH 44132 Guarantee: 30 day return privilege- freight prepaid by buyer Terms: Net with order Price: F.O.B. Location $975.00 Stock# S212127 If you have any questions regarding this machine or its tools. Please don't hesitate to email us with questions. Most emails will be responded to within 24 business hours. Include the Stock number with your email. Here at Small Tools Inc. Our highly skilled staff fully runs and tests the machines ... morefor sale to ensure you get a quality product. If you are able to. Stop in to our warehouse. We can put you in the driver's seat and have you operate all of the machine's features before you buy. We pride ourselves on being an honest American-owned company. We can also send videos upon request of the machinery in action if you aren't able to make it in to our facility. Shipping is of the responsibility of the buyer. But a free quote can be given after purchase has been made. Contact us for more information on shipping or arrangements. This machine is subject to prior sale in our brick-and-mortar building unless otherwise noted. Thank you for looking! Very Truly Yours, Small Tools Inc. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
BELT SANDER BOTTOM SHIELD FOR DELTA 6X48 BELT DISC SANDER SANDER MODEL 52-611
BELT SANDER BOTTOM SHIELD FOR DELTA 6X48 BELT DISC SANDER SANDER MODEL 52-611 USED BELT SANDER BOTTOM SHIELD FOR DELTA 6X48 BELT DISC SANDER SANDER MODEL 52-611.
|
|
|
20" Disc Sander Metal or Wood Pattern Making Shop Good Condition
This is an import 20" Disc Sander similar to the brands Jet. Wilton, etc. It is in good shape and runs very well. It is currently wired 220v single phase but can also be wired for 115v. I bought a new Leeson 3hp motor for it a few years ago. The disc and hub were also machined to run extremely true. This is a great disc sand and I am only selling it because I have upgraded to a 24" model. The motor is a reversing motor but I could never figure out how to wire up the switch to take advantage of it. Local pick up is welcome. Shipping is at buyer's expense. I get pretty good freight rates if you are interested. Please contact me with any questions. Thanks, Jared
|
|
|
DELTA BELT disc sander BADE ARBOR FROM BELT DISC SANDER 31-730f
DELTA BELT disc sander BADE ARBOR FROM BELT DISC SANDER 31-730f USED DELTA BELT disc sander BADE ARBOR FROM BELT DISC SANDER 31-730f. THE GAURD WAS TAKEN OFF OF A DELTA BELT DISC SANDER MODEL 31-730F PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE GAURD.
|
|
|
PORTER-CABLE 4" x 8" Bench Belt / Disc Sander PCB420SA
PORTER-CABLE 4" x 8" Bench Belt/ Disc Sander PCB420SA Item Description Induction ball bearing motor(3/4 HP) provides power for small or large sanding operations on various materials. Two aluminum work tables. For Belt and disc sanding support. Built-in dust bag with port keeps work area clear of sawdust. Provides quick shop cleanup. Quick release belt tension lever for fast belt changes. Uses standard 4" x 36" belts. Single knob belt tracking adjustments to keep belt on aligned correctly. Motor: 5 Amp Strokes/Min: spm Speed: 3450 rpm Abrasive Belt Size: 4 x 36" Disc Diameter: 8" Table Size: 4-15/16 x 6-11/16" Dust Collection Outlet: 2-1/2" Table Tilt: L: 0- 45° Miter Gauge Groove: Yes Height: 14" Length: 20" Width: 23" Weight: 51.10 lbs Shipping Weight: 58.15 lbs. Unit is used and ... moreis in full working condition. Images Before bidding on our products. Please check to make sure that this item is compatible with your system/ application. We are not responsible for any compatibility issues regarding fitment due to incorrect parts. We try to be fair and accurate with all my auctions and descriptions. Please read each auction and bid carefully. If you have a need to contact us please feel free to do so. Please feel free to contact us through eBay-mail with any questions. Payment Shipping Returns Unless otherwise stated. All shipping prices will be calculated using USPS for all packages under 10 lbs. Any packages that are over 10 lbs will be shipped using UPS ground. If you would prefer alternate shipping methods please contact us prior to making any payments on your purchase. International Buyers Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We accept process all payments using Paypal. This is both for our protection and the buyer's protectio
|
|
|
VINTAGE '' VAN DORN '' FLEXABLE 7" DISC SANDER WORKS GREAT!!!
Selling a used Vintage"Van Dorn" 7" flexable sander. Big.Powerful and works great. Just don't make them like this anymore.
|
|
|
Max 16" Dual Disc Grinder/ Sander On Max Stand Baldor Motor 2 HP 1725 RPM 3 PH
Max 16" Dual Disc Grinder/ Sander On Max Stand Baldor Motor 2 HP 1725 RPM 3 PH YOU ARE BIDDING ON: 1- Max 16" Dual Disc Grinder/ Sander On Max Stand Baldor Motor 2 HP 1725 RPM 3 PHVolts 208-220/440. This Item Is In Good Working Condition. Priced To Sell So Wont Last Long! See Pics FEEL FREE TO MAKE OFFER. NO REASONABLE OFFER REFUSED PLEASE FEEL FREE TO ASK QUESTIONS! International buyers. We will ship worldwide, contact us before you make your purchase for an international shipping quote. If not listed as new PLEASE make sure you understand the following: They are from a working environment. They are untested and sold as-is. This means they may work fine they may not work at all. ALL ITEMS MAY HAVE LIGHT SCRATCHES. MAY HAVE SOME SMALL DENTS OR WARE. WE TRY TO PICTURE THEM TO REPRESENT THE CONDITION THE BEST WE CAN. IF YOU NEED MORE ... moreDETAILED PICS DO NOT HESITATE TO CALL OR CONTACT US. Monday-Friday 8a.m-5p.m Eastern 1-855-869-6191* WE WILL ENTERTAIN ANY OFFERS* PLEASE CONSIDER THE FOLLOWING WHEN BUYING ITEMS. WE ARE A RESALE WAREHOUSE. WE DO OUR BEST TO DESCRIBE EACH ITEM IN ITS TRUE CONDITION! Freight: Freight prices listed apply only when being shipped to a commercial address that has a loading dock and a receiving forklift. Shipping anywhere that doesn’t have these. Please contact us so we can requote the shipping costs. If you have any question please call JAY Cell 1-574-312-4837 Office 1-855-869-6191 Please check us out on Facebook and“LIKE” us! http:www.facebook.com/RCRecycling Thanks Again RC Resale Warehouse Location: D-ROOM Listed By: OBE We gladly accept PayPal. Certified Funds, or Cash for local pickups. Shipping price shown is for shipping in the US to lower 48 states only. Please ask us for shipping quotes on any item you want shipped anywhere else. We usually ship items on the day payment is received. Our hours are from 8am-5pm Eastern time. Contact us about combined shipping rates. All items come with a 14 day gurantee unless stated in listing. Buyer pays return shipping unless state
|
|
|
SILVER LINE SL-7 FLOOR DISC EDGER SANDER WITH BAG
HI UP FOR SALE IS THIS SILVER LINE SL-7 FLOOR DISC EDGER SANDER THAT HAS 115 VOLTS. 15 AMPS, AND USES A 7" DISC, WITH DUST BAG, BAG HAS SLIGHT HOLE, THIS ITEM WAS TESTED AND IS IN GOOD WORKING CONDITION. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. THANK YOU AND HAVE A GREAT DAY! Check out my! Be sure to add me to your!
|
|
|
KBC 4" Belt / 6" Disc Sander 6436 #6260LR
KBC 4" BELT/ 6" DISC SANDER model 6436 ser# 18978 mfg. date: 1992 Table for the disc is removed and used on the belt As is Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For shipping please use the UPS calculator. Buyer pays all shipping expenses. Thank you. Return Policy Within 14 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return feight will be payed by the buyer and it must be returned in the same condition that it was shipped. Thank you Liability Seller makes no claims as to the equipments compliance to Starlight Supply Inc. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal ... moreinjury or property damage resulting from the handling or use of this equipment or items. It is the buyer's responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer's responsibility as to the safe handling and operation of this equipment or items. Be sure to add me to your!
|
|
|
DELTA 4" belt/6"disc SANDER INSTRUCTION MANUAL 31-460 type 2
INSTRUCTION MANUAL- DELTA 4" BELT/6" DISC SANDER MODEL 31-460 TYPE 2. EXCELLENT CONDITION. EMAIL WITH QUESTIONS. THANKS FOR LOOKING.
|
|
|
J-Line Wood 14" Disc Sander Woodworking Sanding Machine
Paypal. Visa, Mastercard, American Express. In order to promote a great transaction please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. Standard shipping or local pickup is available. Please use the freight shipping calculator to the right to calculate freight shipping which only has the freight carrier's standard insurance. If you require your item to be fully insured for ... morethe freight shipment please email us indicating that so we can total your invoice with shipping and the additional insurance. PA State sales tax applies to all local pickups unless you have a tax exemption form with you at the time of pickup. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. J-Line Wood 14" Disc Sander Woodworking Sanding Machine DESCRIPTION: WE ALSO HAVE THIS ITEM FOR AUCTION THROUGH OUR AUCTION COMPANY'S WEBSITE. SO THIS ITEM WILL BE REMOVED FROM LISTING AFTER THE SALE. ~ Up for auction is a 14" good working J-Line disc sander. 208/220/440V 3 phase. It has a 3/4HP motor. The freight shipping weight is 180bs(weight includes pallet) on a secured pallet. If picking up locally. We can load your vehicle with the forklifts. We palletize and/or load the freight trucks for free. Freight Shipping Calculator Fill out the fields below and press the orange button to get instant rates. Enter Your U.S. Zip Select Location Type Business with Dock or Forklift Business without Dock or Forklift Construction Site Convention Center
|
|
|
delta 12" disc sander with dust attachment
This is my delta 12"sander. Used maybe 3 times. Its dusty but mint.
|
|
|
side handle for 7" disc sander 304 by Porter Cable or Rockwell ( heavy rubber )
Fits 7" disc sanders by Rockwell/ Porter Cable models 303 304 305 4774. Heavy duty weight(1.4# Great for gloved hand user. NOTE: Let me quote your shipping to get it right.flat rate box is not always the best price.please note that USPS has raised parcel post so the shipping is for a flat rate box
|
|
|
SILVER LINE, SL-7 FLOOR DISC EDGER SANDER WITH BAG, EGDE SANDER
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge This auction is for a Silver Line Floor Sander Edger with Bag. Both the bag and the sander are in good condition. Payment Terms PayPal Shipping Terms Fed Ex ground insured, inkfrog terapeak.
|
|
|
Enco 20 inch Disc Sander DS 20
Enco 20 inch disc sander. DS 20. N ote: The on/ o ff switch cover is cracked and t aped. This was purchased by a friend of mine brand new. Only had occasional use for making patterns out of wood. 3 phase. 220 volts. Manufactured 1996. Posted with the
|
|
|
MA D POWERMATIC 12" DISC 6X48 SANDER WITH TILTING TABLE #30B
BUY IT NOW NO WAITING. POWERMATIC COMBINATION 6X48 BELT SANDER AND 12" DISC SANDER. MODEL 30B. HAS ONE TILTING TABLE NO MARKS OR RUST. 230-460 VOLTS 3PH. MISSING COVER FOR CONTACTER AND ONE CLAMP FOR TABLE. YOU GET WHAT IS PICTURED AND NOTHING ELSE. PAYPAL TAKEN. QUESTIONS CALL JUSTIN 619-253-6499. I SELL A LOT OF DIFFERENT ITEMS AND AM NOT A EXPERT ON THEM I MAY NOT NO IF SOME THING IS MISSING OR COMPLETE AND IT IS YOUR RESPONSIBILITY TO DETERMINE THAT AND I WILL NOT BE HELD RESPONSIBLE OR LIABLE IF SOME THING IS MISSING OR NOT COMPLETE. READ AD COMPLETELY. IF I DON'T RESPOND TO YOUR EMAIL YOUR QUESTION WAS ANSWERED IN THE AD OR YOUR SPAM FILTER WAS ON. LOCAL PICK UP WELCOME. FOR LARGE ITEMS EMAIL FOR SHIPPING COST. CHARGE $ 50.00 PACKAGING COST. QUESTIONS CALL JUSTIN 619-253-6499. BY BIDDING YOU AGREE TO ALL OF THE TERMS AND CONDITIONS. ... moreBY BIDDING YOU ARE INTERRING INTO A LEGAL AND BINDING CONTRACT AND ARE EXPECTED TO PAY. YOU ARE RESPONSIBLE FOR ALL LEGAL FEES AND EXPENSES INCURRED COLLECTING THE MONEY OWED. IF DEFAMATION OF CHARACTER HAPPENS YOU ARE RESPONSIBLE FOR ALL ATTORNEY FEES AND EXPENSES. IF MAILING P0STAL M0NEY 0RDER 0NLY SEND TO JUSTIN WOOLSEY. 1155B POGO ROW, SAN DIEGO CA 92154. TYPE YOUR NAME, ADDRESS, PHONE NUMBER, AND ITEM NUMBER. AND IF YOU WANT SHIPPING INFORMATION INCLUDE YOUR EMAIL ADDRESS. WHILE DESCRIPTIONS ARE BELIEVED TO BE ACCURATE THE SELLERS MAKE NO WARRANTIES OR GUARANTEES. EXPRESSED OR IMPLIED, AS TO THE GENUINENESS, AUTHENTICITY OF, OR DEFECT OF ANY ITEM(S) BEING SOLD AND WILL NOT BE HELD RESPONSIBLE FOR ANY ADVERTISING DISCREPANCIES OR INACCURACIES, INCLUDING WITHOUT LIMITATION ANY PICTURE, DESCRIPTIONS OR OTHER INFORMATION RELATING TO THE ASSETS.ALL ITEMS ARE SOLD ON AN AS-IS WHERE IS AND WITH ALL FAULTS BASIS. THE SELLER MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, AS TO THE NATURE, QUALITY AND VALUE OR CONDITION OF THE GOODS OR ITS SUITABILITY FOR ANY USE. SELLER EXPRESSLY AND SPECIFICALLY DISCLAIMS, WITH OUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNE
|
|
|
Max 16" Disc Sander / Grinder 3/4 HP 1725 RPM
This listing is for a MAX 16" Disc Sander/ Grinder. This item is in good working condition. Specifications: 3 phase 3/4 HP 220 V 2.4 A 3 phase 60 cycle 1725 RPM Listed as no shipping but we would be happy to give you a quote upon request. Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $5.00 handling fee on all items. Any item requiring UPS/FEDEX shipping will include an additional $5.00 fee. A 8.5% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating ... moreshall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. All items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carriers for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery Items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each
|
|
|
3M Disc Sander Disc Sander 1hp Model 20232 With 23 Disc
3M disc grinder. Sander, polisher. Comes with everything in the pictures. Works great Posted with
|
|
|
Jet 20" Disc Sander JDS-20-3, 2HP, 3 Ph, 230/460 V
Jet 20" Disc Sander JDS-20-3. Specs: Output: 2HP HZ: 60 Volt: 230/480 AMP:8/6.5 RPM: 1720 Phase 3 Serial no: k00612 Shipping determined by buyer's location and at buyer's expense. Pick-up is also an option.
|
|
|
WILTON 6 x 8 COMBINATION DISC / BELT SANDER, WITH DUST COLLECTOR 22213
in titles& description Name: WILTON 6 x 8 COMBINATION DISC/ BELT SANDER. WITH DUST COLLECTOR, Ticket# 22213, Model: 4210, Manufacturer: WILTON, Item located at: Hanover. MD, Serial# 3070125, Condition: Used, Terms& Condition: As is where i, Selling Price: $950.00 Description: Major Plant Liquidation being held in conjunction with Koster Industries and Norman Machine Tool SPECIFICATIONS: BELT: 6 In x 48 In. DISC: 10 In. BELT SPEED: 1650 SFPM. BELT TABLE SIZE: 6 In W x 10 1/2 In L. DISK SPEED: 2100 RPM. DISK TABLE SIZE: 7 1/2 In x 13 In. TABLE SLOTS: 5/8 In. TABLE TILT: 45 Degrees. MOTOR: 1 HP/ 1 PHASE 115 VOLTS. OVERALL DIMENSIONS OF FINISHING MACHINE: 23 In W x 26 In DEEP x 61 In H. EQUIPMENT INCLUDED: CABINET-STYLE DUST COLLECTOR. THIS MACHINE IS BEING SOLD AT A LIQUIDATION; AS IS. WHERE IS. NEW REPLACEMENT PRICE WITH DUST COLLECTOR: ... more$ 2.000.00. LIQUIDATION PRICE: $ 950.00. NOTE: PRELIMINARY SPECIFICATIONS SUBJECT TO CHANGE. RIGGING IS AN ADDITIONAL CHARGE AS WELL AS SKIDDING AND OR CRATING. | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
7" Pneumatic Right Angle Disc Sander / Grinder - Dotco Item 10L5307B
This Heavy Duty. 7" Vertical Pneumatic Grinder has a powerful 4HP motor that turns out 7200 RPM. For more information please call 204-837-8361 or email info@applifast.com.
|
|
|
Atlas Copco 6" Pneumatic Random Orbital Disc Sander LST32HO90-15
Atlas Copco 6" Pneumatic Random Orbital Disc Sander LST32HO90-15 Features- Extraction model- central suction(hosing not included) Powerful. Vertically mounted air motor- Low noise- Long service life- Low vibrations with double counter-weight system- Lubrication and silicon free- 8 mm orbit diameter(for medium fine surface finish) Two handle grip Description- Part Number: LST32HO90-15( LST32 H090-15) Manufacturer: Atlas Copco- Motor Type: Vane- Disc Diameter: 6" Max Output: 0.3 kW- Max Free Speed: 9000 r/min- Orbit Diameter: 8 mm- Weight: 1.4 kg(3 lbs) Height Over Spindle: 120 mm- Length: 300 mm(11.81" Tested and works as it should. Comes as pictured. 7580( JK)4/29/13
|
|
|
Oliver 30" Disc Sander 41-D
Oliver 30" Disc Sander 41-D Features- Grinding can be done by resting work on table or"off-the-hand" Tilts 30° up and 45° down- No holes in face of disc. Includes a safety cage. Description- Part Number: 41-D- Manufacturer: Oliver- Motor Output: 7.5HP- Motor Voltage: 230/440V- Wheel Diameter: 30" Table: 46" x 20" can be adjusted closer to disc) Dimensions: 64" H x 58"L x 53" W- Very well built and kept Oliver machine. Comes as pictured. 7583( JK)4/30/13 General Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except ... moreholidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our other items. You are welcome to sign up for our email newsletters to keep track of new arrivals. General Footer Info Freight Shipping: Freight Shipping is highly variable in costs over time. Please contact us before paying for your item so we can get you the best rate available at the time and send you an invoice reflecting the savings. We get very good shipping rates and are normally much cheaper than eBay’s freight calculator. Freight Shipping Requirements: Freight shipping requires complete contact information including:
|
|
|
Ingersoll Rand Pneumatic 7" Vertical Disc SANDER POLISHER SUPER DUTY
THIS IS A SUPER DUTY AIR SANDER OR POLISHER. IT'S IN GREAT SHAPE AND WORKS GREAT. THIS IS AN INDUSTRIAL SANDER/ POLISHER. MADE TO LAST MANY YEARS. YOU WON'T BE DISAPPOINTED.
|
|
|
Used DELTA Belt Disc Sander Model 31-735(top) & 52-625(base)
Used DELTA Belt Disc Sander Model 31-735(top) 52-625(base) 48" belt sander w/ vertical/horizontal positioning. 12" disc sander with 6" belt. 13" x 16" tilting table 1 ½ hp. 240V, 7.5A, 60AZ, PH 1. Enclosed steel stand with dust collection fan
|
|
|
Delta Rockwell 12 Disc and 4x52 belt sander combo restored
12 inch disc and 4x52 inch belt. All pieces professionally powder coated and reassembled with new bearings. New graphite on platen. Includes 5 new 80grit belts. NO motor or stand. Tracking has to be adjusted. I hate to see this go. But really need the space more than the machine. My loss is your gain. For pick up in Milwaukee WI. Will store with payment for up to one month.
|
|
|
Porter Cable Heavy Duty 7" Disc Sander Model 304
Sander is an old school heavy duty model 304. This sander is very strong and works great. The wire on the sander is cracking some and has separated where it meets the handle no exposed wiring though can easily be taped or fixed completely. Sander is sold as is. Posted with
|
|
|
Axminster AS408 Bench Top Belt & Disc Sander
Axminster AS408 Belt& Disc Sander. Product Code: SP005221/ Returns Reference: RT163604. Returned due to being unsuitable for the customers needs. Once within our workshop the AS408 was inspected and bench tested with no fault being found. A brand new belt has been fitted along with the disc being cleaned. A super bench top belt and disc sander looking for a good home. Repaired. 6 Month Warranty. Huge Savings. Free Delivery* Delivery to UK mainland only. Key Features. No-volt-release switch Table can be used either on the disc or on the belt Captive bolts to change elevation of sanding belt Generous-sized sanding platform Guard assembly fits accurately around disc Dust extraction point under table Technical Specification. Model AS408 Rating Light Trade Power 250W Belt Speed 520m/min Belt Size 100 x 915mm Diameter of Disc 200mm Table Size ... moreDisc 220 x 150mm Dust Extraction Outlet 35mm Overall L x W x H 500 x 440 x 370mm Weight 18kg. About our Clearance Outlet. Items branded as part of our" Clearance Outlet" within our eBay store are typically customer returns or part of our clearance range( ex-demo. Samples, obsolete models etc) Due to the nature of the advertised they have typically been used. Unless stated otherwise. The item has been checked& bench run by our engineers to ensure the unit is in a working order( unless stated) Calibration maybe required with a possibility of minor parts missing- this is why it is offered at a reduced price. Please do contact us with any questions- happy bidding. Copyright © Axminster Power Tool Centre Ltd 2012. Unit 10 Weycroft Avenue. Axminster, Devon EX13 5PH. United Kingdom Powered by
|
|
|
DAYTON 2" x 42" BELT / 6" DISC COMBINATION SANDER - #6Y945B
aims DAYTON 2" x 42" BELT/ 6" DISC COMBINATION SANDER- 6Y945B read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Dayton Electric Mfg. Co. This is a used Vertical Belt& Disc Combination Sander in working condition. Model# 6Y945B Specifications: Belt Size: 2" x 42" Disc Diameter: 6" Wheel Arbor: 10 mm. Motor: 1/3 Horsepower. 120/ 240 Volt, 3,450 rpm, 3.3/ 1.65 Amps, 60 Hz. Electrical: 120 Volt. Single Phase. Overall Dimensions: 20" x 18" x 58" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a ... moredollar with no reserve. DAYTON 2" x 42" BELT/ 6" DISC COMBINATION SANDER- 6Y945B DAYTON 2" x 42" BELT/ 6" DISC COMBINATION SANDER- 6Y945B DAYTON 2" x 42" BELT/ 6" DISC COMBINATION SANDER- 6Y945B DAYTON 2" x 42" BELT/ 6" DISC COMBINATION SANDER- 6Y945B Reliable Tool Inc. c 2011 | Powered by 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13e69de86af-0xfb-
|
|
|
Sander / Grinder 10"Disc / 4"Belt Combination Bench Model Kalamazoo Ind.115Volt!
Thanks For Taking The Time To Visit And Consider Our listing.It's Very Much Appreciated! Important Bidding/Buying Information Related To This Listing; We Have Done Our Best To Describe It In Detail;However. This Is A Used Item And In Our Opinion A Good One;However, Opinions Can& Will Differ On Occasion And Because Of This We Ask That You Be 100% Sure You Know What Your Buying& What To Expect When It Arrives Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit& Inspect It Yourself In Person;However.Should This Not Be Possible Or Practical Please Review The Photos& Ask As Many Questions As Possible So You Know What To Expect When It Arrives! Notice; This Has Been.Inspected And Tested For It's Function Only.We Can Not& Do Not Determine If It Meets Any And/Or All Safety Issues ... moreAnd/Or Concerns With Regards To The Machine, It's Installation,Operation& Safe Guarding. Any And/Or All Issues Or Concerns With Regards Safety Are The Buyers Sole Responsibility And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above Machine Details& Specifications(1) Pre-Owned Kalamazoo Ind. 10"Disc/4"Belt Combination Bench Model Sander Electrical-115/230 Volts.1Ph,60Hz 10″ disc sander with 4″ x 36″ belt sander. With Belt Cover. Horizontal or vertical belt position. Overall Condition; Here is a good running Pre-owned Kalamazoo bench model 10"disc/4"belt combination sander that we just got in and it's ready to go! This machine is a great little machine to have around the shop for the hundreds of times you need to fix something around your shop and this machine comes complete with heavy duty butcher block table and it just about ready to connect to a dust collector.The last owner started with a hole in the table and a connection for the hose which would vacuum the disc side and all you need to do is ad a flange for the belt side, connect them together with a(Y) connector Important Safety Notice.There are no safety devic
|
|
|
Skil Disc Sander Model 3370 4" Belt 6"Disc Sander in Ct
Skil Disc Sander Model 3370 4" Belt 6"Disc Sander in Ct You are purchasing a Skil- Model 3370 4" belt- 6" disc sander. This sander is used and is being sold"as is" 120 volts Ac only 60 Hz 4.5amps Type 1 Additional Comments: This item is for local pick-up only in Colchester Ct 06415*Photos shown are actual photos of items taken prior to listing. Please email us with any questions before placing your bid. Payment& Shipping Information: PayPal is the preferred method of payment. Full payment must be received within 7 days of auction close or your purchase rights will be forfeited and the item relisted. Product Warranty/Return Policy: Unless stated otherwise in the product description. There are no product guarantees or service warranties associated with this sales transaction. Buyer has the right to return the ... moreproduct(within 7 days of receipt) only if it is not as described and/or pictured. Buyer will pay all return shipping costs. Do your research to be sure you know what you are bidding on. If you close on a bid. It is a contract to buy per eBay's terms and conditions. About Us JenmarAuctions…eBay the Easy Way! is a division of JENMAR International. LLC, a New England based distributor of both consumer and commercial products, spanning a range of personal, business and leisure interests and needs. Please feel free to check out our other listings. Or visit us at our new. Contact Us If you wish to contact us. We can be reached at: JenmarAuctions 244 Upton Road. Colchester, CT 06415 860.537.1190 888.820.0409 Disclaimer Jenmar International. LLC, DBA JenmarAuctions(JenmarAuctions" is not the owner or seller of the goods listed herein, but merely is acting as bailee on behalf of the actual seller. JenmarAuctions's only role is to facilitate the sale of the goods listed herein by holding the goods until such time as a sale is completed and the goods are placed with a shipper for transport to the buyer. JenmarAuctions provides no warranties on the goods listed herein, other
|
|
|
DISC SANDER US MOTORS MOTOR 10 HP, 60/50 CY, 900/750 RPM, 3 PHASE, 18" DISC
DISC SANDER US MOTORS MOTOR WITH DISC 10HP 220/440V TYPE: SC CODE: F FRAME: 364-4 3 PHASE 60 CYCLE. 40*C, 3-15A, 900RPM 50 CYCLE. 36/18A, 750RPM AUTO START BALL BEARING S/N: 714959 18" DISC DIAMETER X 1" THICK APPROXIMATELY: 48" HEIGHT X 28" X 30" MOTOR HAS BEEN TESTED AND RUNS GOOD*PLEASE VIEW PICTURES CAREFULLY- SOLD AS IS* OLD STOCK* PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please note this item is"AS IS" with NO WARRANTY OR GUARANTEE STATED NOR IMPLIED. Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING. All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by ... morethe carrier. This is something we have no control over and is an additional charges to shipping. Approximate weight: 825 lbs. PLEASE CONTACT US FOR A FREIGHT QUOTE. Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities RAB/ 6038/ SURPLUS/ 1) E
|
|
|
SKIL PROFESSIONAL7"/9" DISC SANDER 9645 3.5HP
SKIL PROFESSIONAL7"9" DISC SANDER 9645 3.5HP tested working question call 214)828-7854@5e
|
|
|
Dynabrade 50360 Right Angle Pneumatic Air Disc Sander/grinder, used 12,000rpm
1 Dynabrade 50360 Right Angle Pneumatic Air Disc Sander/grinder. Used 12,000rpm In good working order. HAVE OTHERS LISTED ALSO. FREE SHIPPING*SHIPPING* We ship to the continental U.S.ONLY. Shipping charges will be given in the description of each auction. We will combine shipping. We will not ship any item paid by PayPal to any address but the confirmed address. If your address is not confirmed. Please chose another payment method. If you need the item shipped to a different location, please choose another payment type. We will not be responsible for loss, theft,or damage if buyer does not purchase postal insurance, based on items closing valve. NO GUARNTEES, OR RETURNS,UNLESS OTHERWISE NOTED. This lot is sold in as-is condition. Return shipping will be paid for by the buyer on items deemed returnble by the seller. PAYMENT* I accept the following ... moreforms of payment, M.O. Certified Checks, Pay-Pal, or Bank Transfers. We do not accept any other source of wire payments or transfers. Please use e-Bay checkout or send PayPal to my accont at: PayPal payments will only be acceped with a comfirmed address. If your address is not confirmed, please choose another payment type. Seller reserves the right to reject BIDS or PAYPAL PAYMENTS form users with excessive negative or hidden feedbacks. PLEASE BE AWARE NON-PAYING BIDDER NOTICES WILL BE FILED ON THE 8TH DAY AFTER E.O.A. and your item may be relisted. It is the sellers right to decline any payment received after the 8th day. It is the buyers responsibility to have non-paying bidder removed. PROBLEMS* All items will be shipped within 1 to 2 working days after payment is received. If you are bidding on more that one item and would like to combine shipping please let us know to assure you receive your purchase as quickly and cost effective as possible. If a probem arises, please make every attempt to contact us, either by e-mail or by phone. We are more than happy to discuss any problems and will make every attempt to resolve any issues. Thank you and Happy bidding.
|
|
|
Dynabrade 50378 Right Angle Pneumatic Air Disc Sander/grinder, used 12,000rpm
1 Dynabrade 50378 Right Angle Pneumatic Air Disc Sander/grinder. Used 12,000rpm In good working order. HAVE OTHERS LISTED ALSO. FREE SHIPPING*SHIPPING* We ship to the continental U.S.ONLY. Shipping charges will be given in the description of each auction. We will combine shipping. We will not ship any item paid by PayPal to any address but the confirmed address. If your address is not confirmed. Please chose another payment method. If you need the item shipped to a different location, please choose another payment type. We will not be responsible for loss, theft,or damage if buyer does not purchase postal insurance, based on items closing valve. NO GUARNTEES, OR RETURNS,UNLESS OTHERWISE NOTED. This lot is sold in as-is condition. Return shipping will be paid for by the buyer on items deemed returnble by the seller. PAYMENT* I accept the following ... moreforms of payment, M.O. Certified Checks, Pay-Pal, or Bank Transfers. We do not accept any other source of wire payments or transfers. Please use e-Bay checkout or send PayPal to my accont at: PayPal payments will only be acceped with a comfirmed address. If your address is not confirmed, please choose another payment type. Seller reserves the right to reject BIDS or PAYPAL PAYMENTS form users with excessive negative or hidden feedbacks. PLEASE BE AWARE NON-PAYING BIDDER NOTICES WILL BE FILED ON THE 8TH DAY AFTER E.O.A. and your item may be relisted. It is the sellers right to decline any payment received after the 8th day. It is the buyers responsibility to have non-paying bidder removed. PROBLEMS* All items will be shipped within 1 to 2 working days after payment is received. If you are bidding on more that one item and would like to combine shipping please let us know to assure you receive your purchase as quickly and cost effective as possible. If a probem arises, please make every attempt to contact us, either by e-mail or by phone. We are more than happy to discuss any problems and will make every attempt to resolve any issues. Thank you and Happy bidding.
|
|
|
Dynabrade 52515 Right Angle Pneumatic Air Disc Sander/grinder, used 15,000rpm
1 Dynabrade 52515 Right Angle Pneumatic Air Disc Sander/grinder. Used 15,000rpm In good working order. HAVE OTHERS LISTED ALSO. FREE SHIPPING*SHIPPING* We ship to the continental U.S.ONLY. Shipping charges will be given in the description of each auction. We will combine shipping. We will not ship any item paid by PayPal to any address but the confirmed address. If your address is not confirmed. Please chose another payment method. If you need the item shipped to a different location, please choose another payment type. We will not be responsible for loss, theft,or damage if buyer does not purchase postal insurance, based on items closing valve. NO GUARNTEES, OR RETURNS,UNLESS OTHERWISE NOTED. This lot is sold in as-is condition. Return shipping will be paid for by the buyer on items deemed returnble by the seller. PAYMENT* I accept the following ... moreforms of payment, M.O. Certified Checks, Pay-Pal, or Bank Transfers. We do not accept any other source of wire payments or transfers. Please use e-Bay checkout or send PayPal to my accont at: PayPal payments will only be acceped with a comfirmed address. If your address is not confirmed, please choose another payment type. Seller reserves the right to reject BIDS or PAYPAL PAYMENTS form users with excessive negative or hidden feedbacks. PLEASE BE AWARE NON-PAYING BIDDER NOTICES WILL BE FILED ON THE 8TH DAY AFTER E.O.A. and your item may be relisted. It is the sellers right to decline any payment received after the 8th day. It is the buyers responsibility to have non-paying bidder removed. PROBLEMS* All items will be shipped within 1 to 2 working days after payment is received. If you are bidding on more that one item and would like to combine shipping please let us know to assure you receive your purchase as quickly and cost effective as possible. If a probem arises, please make every attempt to contact us, either by e-mail or by phone. We are more than happy to discuss any problems and will make every attempt to resolve any issues. Thank you and Happy bidding.
|
|
|
PORTER CABLE 7403 VARIABLE SPEED Disc Rotary Sander Floor Sander AND Paint Eater
Cosmetically this is a 9.9 and it works perfectly. I used this to sand down about 45 ft2 of clapboard. Then I used it to get some stuck on linoleum. Amazing for both. Original disc still on it. I had lost the wrench used to secure the sanding discs but just got a new one from the dewalt store so this will be a complete package. Check my other listings for other great tools and really cool stuff! Includes the following: Sander item 7403 Paint/ Floor grinder attachment 5041 Arbor wrench BRAND NEW Allen key Check my feedback and bid with confidence. Please pay within 3 business days. I can't ship if you don't pay. All US Territories. Alaska and Hawaii please wait for an invoice. Your shipping will be higher. Read the reveiw on this item and the first Amazon review quite accurate. It reads as a how to manual. Foreign bidders welcome. ... morePlease be sure you have compatable voltage. Questions? Just ask! A YouTube link http:www.youtube.com/watch?v=Q0VMcs882vQ&feature=youtube_gdata_player Most Helpful Customer Reviews 273 of 275 people found the following review helpful. 4.0 out of 5 stars Critical Instructions for use! July 8. 2002 By Amazon Verified Purchase This machine works but is heavy. Like other reviewers said. Myself and my coworker are each 6 foot tall men in good condition. We can barely put in 6 hours a day with the tool and that includes two half hour breaks to allow for muscles to stop spasming. BUT-if used correctly. This tool does remove paint. It is slow, paint dust goes everywhere, and you must wear a respirator mask and a face shield. Contrary to the instructions included with the tool.read this carefully-There are little adjustable rails on the left and right side of the disc. The rails can be lowered and raised to adjust the angle of attack of the disc. I found that the"cutting" side rail(leading edge rail) of the grinder needs to be set to about 1/16 inch above the grinding disc(leaving 1/16th inch of exposed disc to do the cutting) and the back side rail(trailing edge rail) needs
|
|
|
Porter Cable D1 SANDER, DISC SANDER
Thousands of Used Metalworking and Plastic Machines& New Machine Tools Photos, Full Descriptions and Prices- Fast& Easy About Us Shipping Payments& Checkout FAQs Our Inventory Home CNC Machines Manual Lathes. Mills, Drills, Saws Grinders. Hones, Finishing Fabricating Equipment Presses& Feeds Boring Mills Automatic Screw Machines EDMs Inspection Equipment Air Compressors Plastic Machinery Planers& Planer Mills Broaches& Keyseaters Shapers& Slotters Tooling& Accessories Welding Equipment Wire& Fastener Ovens. Furnaces& Environmental Misc Metalworking Gear Machinery Material Handling Misc Non-Metalworking Porter Cable D1 SANDER. DISC SANDER Ref# 141424 iammdna XSANDR PORTER CABLE DISK GRINDER MODEL: D1. S/N: 3086 DISK SIZE: 15" TABLE: 21" X 9" TILTING: 0- 45 DEGREES CCW 0-15 DEGREES CW MOTOR ... moreMADE FOR PORTER-CABLE BY:THE MASTER ELECTRIC CO. DAYTON. OHIO 115/230 VOLTS SINGLE PHASE. WIRED 230) 6.4/3.2 AMPS 1725 RPM. 1/2 HP, 60 CYCLES STYLE: 107867 TYPE: RA FRAME: 7430 S/N: PH 6376 DIMENSIONS: 23" L-R. 23" F-B, 46" H WEIGHT: 500 LBS. F.O.B. OUR HARRISON. NJ WAREHOUSE* Machine Location: HARRISON. NJ Click Here For More Porter Cable Machines Click Here For More Finishing- SANDERS. ALL TYPES(s) Questions about this Machine? Call Andy at(800) 873-6224 ext 7600 Need a Freight rate? Call Alex. Our recommended trucking and shipping broker at(973) 732-3274 effepbdc Finance This Equipment For Your Business- Click Here Buy With Confidence. Machinery Values is one of the world's largest machinery dealers. In business since 1971. All used items bought from our eBay store are covered by a standard MDNA(Machinery Dealer's National Association) 30 day return privilege. Which means you can return an item you are dissatisfied with for a full refund. Please for complete details on how this works. New machines are covered under their own warrantees. Details of each warranty can be found within the quotation for all new machines. Most items in our store are locat
|
|
|
JET TOOLS & EQUIP 1" X 42" BELT SANDER & 8" DISC GRINDER, MOD # JSG-1 , 1/2 HP
THIS IS A JET BELT SANDER& DISC SANDER. MODEL JSG1. THE DISC IS A 8" AND THE BELT IS A 1" BELT. THIS IS IN VERY GOOD CONDITION. THIS COMES JUST A SHOWN, I DO NOT HAVE ANY EXTRAS FOR THIS UNIT. THIS IS WIRED FOR 115V, IT CAN BE CHANGED TO 230 V. PLEASE SEE PICTURES. THANK YOU AND GOD BLESS. I WILL BE SHIPPING THIS ITEM WITH TRACKING AND INSURANCE n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e7e17ee62-0xfb-
|
|
|
AMT 1" x 44" vertical belt & Disc sander 115v 1/2 hp induction motor Fast ship
AMT 1" x 44" vertical belt& Disc sander induction motor 115v~ 1/2 hp~ 1720 rpm ~phase 1~ 60hz ~9 amp Fast shipping $199
|
|
|
DAYTON 1" x 42" BELT / 8" DISC SANDER
Item Information Item Name: DAYTON 1" x 42" BELT/ 8" DISC SANDER Item# 10301 Price/Each: $275.00 Year: Brand Name: DAYTON Model: 2Z646B Serial# Asset Tag: A4586 Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description DAYTON SANDER MODEL 2Z646B 1" x 42" INCH BELT/ 8" DISC SANDER 4000 S.F.P.M. maximum) 1/3 HP DAYTON SPLIT PHASE MOTOR 115 VOLTS SINGLE PHASE ON/OFF SWITCH THREE PRONG PLUG 7" x 9" TILT TABLE 8" DISC ATTACHMENT MISSING 24"H x 10.5" W x 23"L 46 LBS. Contact Us About This Machine Should you have ... morequestions. Please contact David Drozdenko at 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. We accept ACH or Wire payments. Credit card payments are to be made through PayPal and will incur an additional 3% fee on the total amount due. The above fees are non-negotiable and cover the fees paid by Global to banks and services. Thank you for your understanding! Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift g
|
|
|
Mac Tools Disc Grinder/Sander/Polisher/Buffer Air Tool, Model ADG250A
Mac Tools Disc Grinder/Sander/Polisher/Buffer Air Tool. Model ADG250A
|
|
|
Rockwell 12" Disc Sander for parts or repair
InterSchola is retained by education institutions and local public agencies nationwide to bring valuable surplus inventory to the eBay marketplace. Items listed by InterSchola have been declared surplus by the appropriate education or public agency institution in accordance with state regulations regarding the sale of surplus assets and are listed for sale as a service to these organizations. Net proceeds from the sale of these items are returned to the school districts or local public agencies to support their budgets. See our page to learn more about InterSchola. Please also visit the InterSchola Store to see other assets for sale! Rockwell 12" Disc Sander for parts or repair Item Description: This is a Rockwell 12" Disc Sander. Good for parts or repair. Table angle mounting brackets broken Model 31-426 Note Buyer will be responsible ... morefor all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please utilize our scheduled inspection time to view the item(s) first hand and up close. Please check the location of this listing. Many of our item(s) are for local pick up only. This listing is located in San Jose. CA 95133 Item(s) are Sold As-Is. to view our current offerings of school district/public agency surplus items we have for sale on eBay. Click images for larger view(ISID: 33445) nbsp, nbsp, Accessories: Only the accessories or parts described in this listing are included with this item. No other accessories. Including other items or accessories that may be pictured, are guaranteed to be included. nbsp, nbsp, Condition: This item is used and sold as-is. Due to the location. This item was NOT TESTED for operation. Item may need service and/or parts to make operational. nbsp, nbsp, Pickup Logistics and Handling: No loading dock or forklifts are available at this site. Buyer will be responsible for all equipment. Tools, personnel and transportation necessary for loading and removal from site. Please contact us for additional information about removal before b
|
|
|
ENCO Sander Dual Disc/Belt 163-4832
I have to sell this as USED. But I don't believe it ever was used for sanding. It has both the disc(5" and belt(1" Very nice benchtop tool. Has mounting holes to secure to a bench top.
|
|
|
Dynabrade 52503 2500 RPM Air Disc Sander Grinder Pneumatic
Dynabrade 52503 2500 RPM Air Disc Sander Grinder Pneumatic R EBC 21 Central Loan has the hottest gear on the web! Our Other Auctions Check out our other auctions for a wide range of items! This Auction is For a Dynabrade 52503 2500 RPM Air Disc Sander Grinder Pneumatic The grinder is in good shape. There is some scuffs and scratches from use. Owners marks. The grinder has been tested and is fully functional. Handle is offset 7 degree for greater operator comfort and control. Gearless for reduced maintenance and down-time. Features standard muffler for more compact design. Please see photos below for further detail. Auction includes everything shown in photos. Feel free to ask any questions. Happy Bidding! Be up to date with all our deals by liking us on Facebook INTERNATIONAL BIDDING IS WELCOME. BUT PLEASE CHECK WITH LOCAL CUSTOMS TO BE AWARE ... moreOF ANY ADDITIONAL FEES FROM YOUR GOVERNMENT. WE WILL NOT DECLARE ANY LOWER PRICE THEN THE WINNING BID OR PRICE. WE WILL ALSO NOT DECLARE ITEMS AS GIFTS FOR INSURANCE PURPOSES. THANKS Please Use the Shipping Calculator at the Bottom for International Shipping Quotes! We ship all items in 1 business day! Your satisfaction is Guaranteed! Please contact us first if you are not satisfied with your purchase! All electrical items unless otherwise stated are for USA 110v PayPal is Accepted Worldwide! International Buyers – Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. ©Copyright 2006 CentralLoan License# 3600-0946 PAYPAL is now Accepted from any country worldwide! Although we can still only ship to the address provided by ebay and paypal. We prefer Paypal. We also accept Visa. Mastercard, American Express, Discover. California Orders are subject to sales tax of 8.75% Items usually ship within 24hrs. Please allow up to 2 business days. W
|
|
|
DELTA 31-460 4" Belt / 6" Disc Sander Phase1 HP 1/3 120V +extra discs & belts
Delta 4" Belt 6" Disc sander 31-460 with extra parts This Delta 4" Belt/ 6" Disc sander 31-460 SN# R8929 1/3 HP. 3450 RPM, Phase 1, 120 Volts, 4 Amps, 60 Hz It is working, it does NOT come with the bench(just the belt/disc sander) I know from receipts that on 10/11/03 timing belt was replaced… NOTE the safety shield/ cover on the end of the belt area is cracked/broken off… it will sit there. But is NOT attached, see close up pictures. Overall dimensions Width 21" x Depth 16" x Height 11" Table NOT included See more pictures here: smartresale.com/Commercial_Items_FOR_SALE.html More pictures upon request. Ask all questions before committing to buy! We require cash upon pick up. Please bring additional help/ hands/ people to assist with loading. Feel free to contact us any time! SquareTrade © AP6.0
|
|
|
JET COMBINATION 6" x 48" BELT & 12" DISC SANDER / GRINDER - #JSG-6
aims JET COMBINATION 6" x 48" BELT& 12" DISC SANDER/ GRINDER- JSG-6 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Jet Tools. This is a Combination Belt& Disc Sander/ Grinder in working condition. Model# JSG-6 Serial# 3052239 Specifications: Disc Sander: Maximum Disc Size: 12" Table Surface Area: 16-1/2" x 9-1/2" Table Tilt(down/ up) 45 degrees. Belt Sander: Maximum Belt Size: 6" x 48" Table Surface Area: ... more12-3/4" x 7" Table Tilt(down/ up) 45 degrees/ 20 degrees. General: Motor: 1.5 Horsepower. 115/230 Volt, Single Phase Electrical: 115/ 230 Volt. Single Phase Overall Dimensions: 31" x 20" x 65" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. JET COMBINATION 6" x 48" BELT& 12" DISC SANDER/ GRINDER- JSG-6 JET COMBINATION 6" x 48" BELT& 12" DISC SANDER/ GRINDER- JSG-6 JET COMBINATION 6" x 48" BELT& 12" DISC SANDER/ GRINDER- JSG-6 JET COMBINATION 6" x 48" BELT& 12" DISC SANDER/ GRINDER- JSG-6 JET COMBINATION 6" x 48" BELT& 12" DISC SANDER/ GRINDER- JSG-6 JET COMBINATION 6" x 48" BELT& 12" DISC SANDER/ GRINDER- JSG-6 JET COMBINATION 6" x 48" BELT& 12" DISC SANDER/ GRINDER- JSG-6 Reliable Tool Inc. c 2011 | Powered by
|
|
|
CLARKE FM-13 ROTARY FLOOR MACHINE SANDER DISC MAINTAINER STRIPPER CLEAN BUFFER
CLARKE 13" DIAMETER COMMERCIAL FLOOR MAINTAINER MODEL FM 13 AS SEEN IN PHOTOS Super Heavy Duty Electric Floor Buffer. Polisher, Stripper and Scrubber 13" DIAMETER 3 Discs included Good Condition• Die cast aluminum housing is five times stronger than sand castings. Chrome handle tube resists rust- lasts longer. Non-marking. Vinyl bumper protects walls and furniture• Quality and durability have allowed the FM Polisher to be called the"Best in the Industry.
|
|
|
Rockwell-Delta 4" belt, 12" disc vintage sander
You are bidding on a vintage Rockwell-Delta sander with 4" belt and 12" disc. The model is 31-700. It is currently wired for 115v. Single phase but can be converted to 220v single phase. It is mounted on a mobile base with two fixed casters and two swivel casters. This sander is the old heavy cast iron on a thick metal stand. Not like the cheap stuff they make today. It comes with some extra belts and discs. I have it listed for local pickup only but I will be available to have the item picked up by a shipper of your choosing. You arrange for pickup. Shipping/delivery and pay for shipment and I will be available when the shipper arrives to pick up the item. The sander measurements are: 25" wide 32" long 48" high I would guess it weighs over 100 pounds as I have no way to determine the weight. Only a guess. But it ... moreis on wheels so it will be easy to move by the shipper. If you have any questions please contact me via the questions section of my auction.
|
|
|
4x6 belt / disc sander with work stand will ship
Belt/ disc sander runs great. Comes with stand. Stand will be disassembled if shipped. No international shipping. Local pickup welcome. Minutes off of I 90 and I 91 in WestSpringfield Massachusetts. Posted with. 260.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E260-13ec5795484-0x10a-
|
|
|
STATE 16" D- 15 DISC SANDER 3 PHASE (NICE)
STATE D- 15 DISC SANDER COMPLETELY REFURBISHED 3 PHASE READY TO PLUG IN. 2 S ANDERS AVAILABLE. PRICE IS FOR ONE. UNLESS YOU ASK FOR 2. WILL SHIP TO A 150 MILE RADIUS FOR SMALL FEE OR YOU PICK UP. CALL OR EMAIL BOB. 856-691-8766 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13ec5795440-0xfe-
|
|
|
NICE!! DOTCO 7" PNEUMATIC RIGHT ANGLE DISC SANDER / GRINDER - MODEL # 10L5306B
Made by Dotco This is a Pneumatic Right Angle Disc Sander/ Grinder in good condition. Model# 10L5306B Specifications: Disc Diameter: 7" Speed: 6.000 rpm Air Inlet Size: 1/4" NPT Overall Length: 10" Comes as shown in pictures.
|
|
|
RODAC PNEUMATIC SANDER, 4500 RPM, 7" DISC DIAMETER, 1/2" ARBOR HOLE
Inventory Number: 05130510141 Manufacturer: Description: RODAC PNEUMATIC SANDER. 4500 RPM, 7" DISC DIAMETER, 1/2" ARBOR HOLE Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 1, AS SHOWN, TESTS OK BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction ... morelistings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items with FILE photos of these ite
|
|
|
Powermatic 12-in Belt/Disc Sander Model 30B
Excellent preserved machine. Slightly used in PWB R&D environment. Multi-position belt head with indexing pin and head lock Locks at 0 degrees. 45 degrees and 90 degrees Full cast-iron platen with solid crowned aluminum drums 12-in balanced disc with tilting table(15 to 45 degrees) with miter slot Horsepower, 1-1/2 HP, Rpm, 2.375 RPM, Motor Switch Push Button, Disc Table Size, 14-1/2-in x 6-1/2-in(L x W) Belt Size, 6-in x 48-in, Sfpm, 2.410 SFPM, Shipping Weight, 275 lbs. Motor Type, 1 Phase, Table Working Height(Disc) 34-in, Sanding Arm Locking Positions, 0 degrees. 45 degrees and 90 degrees, Disc Table Tilt, 15 degrees Up and 45 degrees Down, Weight, 247 lbs. Disc Size, 12-in, Voltage, 115/230 Volt; Pre-wired 115 Volt, Length, 24-in, Size, 24-in x 31-1/4-in x 54-1/2-in(L x W x H) Seller reserves the right to end the bid for a local ... morepurchase. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13ecb75aa93-0xf2-
|
|
|
HEAVY DUTY 9" DISC & 6" x 48" BELT SANDER / GRINDER
aims HEAVY DUTY 9" DISC& 6" x 48" BELT SANDER/ GRINDER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. This is a used Heavy Duty Disc& Belt Sander/ Grinder in working condition. Specifications: Disc Sander: Disc Size: 9" Belt Sander: Belt Size: 6" x 48" Table Size: 12-1/2" x 6" General: Motor: 3/4 Horsepower. 110 Volt, 1,720 rpm, 10 Amps, 60 Hz Electrical: 110 Volt. Single Phase Overall Dimensions: 17" x 22" ... morex 55" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HEAVY DUTY 9" DISC& 6" x 48" BELT SANDER/ GRINDER HEAVY DUTY 9" DISC& 6" x 48" BELT SANDER/ GRINDER HEAVY DUTY 9" DISC& 6" x 48" BELT SANDER/ GRINDER HEAVY DUTY 9" DISC& 6" x 48" BELT SANDER/ GRINDER Reliable Tool Inc. c 2011 | Powered by
|
|
|
2003 TIMESAVER 35" WET TYPE BELT SANDER & DISC DEBURRING / FINISHING MACHINE
35" TIMESAVER WET TYPE BELT SANDER& DISC DEBURRING/ FINISHING MACHINE Serial# 2322-13- New 2003- Model# 41-SERIE-900-WRD* Very Good Working Condition* Width of Conveyor Belt: 35.43" 900 mm) Abrasive Belt: 36.6" Wide x 74.8" Long. Disc Diameter: 48" Bed Opening: 0 to 3" Minimum Part Size: 3" x 3" 1st Head- Sanding: Contact Roller Head: 7.09" Diameter. Contact Roller Shore: 65 Degrees. Grinding Speed: 1500 to 4300 FPM. 2nd Head- Disc Deburring/Finishing: Speed: 1960 to 4300 FPM. Feed: Fixed Vacuum Conveyor Table. Conveyor Belt: Oil& Heat Resistant. Flat Profile. Feed Speed: 3 to 32 FPM. EQUIPPED WITH: E300 Mitsubishi Control Panel. Front Pressure Rollers with Over-Thickness Safety. 1st Head: Electric Oscillation. Fine Adjustment of Contact Roller with Rise& Fall. Main Motor: 15 KW(20 ... moreHP) Frequency Control. 2nd Head- Disc: Motorized Height Adjustment. 6.9 KW(9 HP) Frequency Controlled Motor. EQUIPPED WITH: Feed: Belly Brake. Motorized Height Adjustment of Conveyor Bed Opening. Frequency Inverted. Lindomatic Table Adjustment. Conveyor Motor 1.3 KW(1.7 HP) Frequency Inverted. Bolt-On Dryer: Double Air Knives. 6) Squeeze Rollers. Conveyor Belt Tracking. Abrasive Belt Tracking. 27" Infeed Loading Area. Quick Release Outboard Support for 1st Head. 4) Bed Jacks. Dial Indicators on Drum. Construction: Part Stainless Steel/Part Mild Steel. Integrated Hoffmann Paper Coolant Filter System. Manual for Machine. Wired for 3 Phase. 60 Cycle, 460 Volts. Overall Size: 130" L-R x 97" F-B x 128" H- Height Can be Reduced for Shipping) HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery
|
|
|
14 " Industrial Disc Sander Commercial Grade
Industrial Disc Sander. 14" diameter, 10-12 sanding disc included with this auction, This unit works great and was used very little in the textile industry, Includes stand, 380 volt 3-phase We can palletize and ship to a commercial address only. No residential addresses, local pick up is always welcome We have the matching Drill press. Bench grinder and belt sander, check out our other auctions, Thanks for looking, the guys at motovocation
|
|
|
DYNABRADE 51371 4-1/2 INCH INDUSTRIAL 1.3 HORSE POWERED AIR DISC SANDER!!!!!!
DYNABRADE 4-1/2" DISC SANDER DESCRIPTION-GREAT CO NDITION-DOES HAVE SOME WEAR FROM USE-SEE PICTURES FOR FURTHER WEAR INFO-WORKS EXCELLENT- TESTED PROPERLY-MODEL: 51371-AIR DISC SANDER-INDUSTRIAL- 1.3 HP( 4-1/2" SIZE) WRENCH INCLUDED FOR CHA NGING PARTS(14mm) 12.000 RPM-SN: 12B1808 Aebargains 5 for 5 all star service-We seek to bring quality pre-owned merchandise to Ebay. We describe the the merchandise we are selling to the best of our knowledge. We at Aebargains are happy to answer any questions you might have on any item. Feel free to e-mail us at anytime. We will do our best to answer your questions promptly and professionally. We ship your purchase out the same or next day of receiving a confirmed payment Mon-Fri. We pride ourselves on getting you your merchandise as soon as possible at a low shipping cost. You may also pick-up ... moreyour merchandise at our store 3119 S. Dort Hwy Flint MI 48507 between 9:30-6:30. IF for any reasons you feel we have not met this criteria please e-mail us your concerns before leaving negative feedback. We will do our best to rectify the situation. Thank you for shopping and happy bidding. Design By: FreeAuctionDesigns
|
|
|
NICE!! DELTA COMBINATION 6" BELT / 9" DISC SANDER/GRINDER
aims NICE! DELTA COMBINATION 6" BELT/ 9" DISC SANDER/GRINDER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made by Delta Machinery. This is a Combination Belt/ Disc Sander/ Grinder in good condition. Model# 31-695 Features: Powerful 1 Horsepower induction motor is totally enclosed for protection against damaging dust. Adjustable belt unit operates vertically. Horizontally or at any angle in-between. Belt guard removes easily for contour sanding. Cast-aluminum ... moretable with miter gage slot tilts 45� for bevel sanding and may be used on either the belt or disc unit. Die-cast aluminum base minimizes operating vibration. Abrasive belt rotates on steel platen with smooth replaceable graphite pad for extra-smooth belt rotation and longer belt life. Belt tracking knob offers operator the convenience of"tool-free" belt alignment. Built-in. 2-1/4" diameter dust outlet for hook-up to dust collection system. Sturdy steel stand with foot pads for greater operating stability and less operating vibration. Power take-off spindle lets you add on accessory flex shaft for handling a variety of other finishing jobs. Belt tensioning lever loosens and tightens belt instantly for quick belt changes. Large. 9" diameter abrasive disc is perfect for sanding large curves or rounding out sharp corners. Specifications: Disc Sander: Disc Diameter: 9" Table Size: 11-3/4" x 7" Table Tilt: 45 degrees Disc Speed: 2.800 rpm. Belt Sander: Belt Size: 6" x 48" Belt Speed: 2.200 sfpm. General: Motor: 1 Horsepower. 120 Volt, 3,450 rpm, 10 Amps, 60 Hz Electrical: 120 Volt. Single Phase Overall Dimensions: 25" x 21&quo
|
|
|
15" CLARK DISC SANDER
WIRED FOR 3 PHASE 220V NOW.A REAL MONSTER BUILT LIKE A BATTLE SHIP.BEARINGS ARE GREAT.WHEN U TURN IT OFF IT COASTS FOREVER.TO BE SHIPPED IT WILL BE BROKEN DOWN TO PIECES THAT IS UPS OR FED EX SHIPPABLE.LOCAL PICK UP PREFERED.recieved this email. you have a Syracuse sander I have a mate to it.Not a Clark that is a company asset plate THE FREE SHIPPING IS EAST OF THE MISSISSIPPI ONLY.OTHER PLACES U PAY THE DIFFERENCE
|
|
|
DYNABRADE 52412 INDUSTRIAL PROFESSIONAL AIR DISC SANDER 3" 0.7HP!!!!!
DYNABRADE AIR DISC SANDER-EXCELLENT CONDITION-WORKS EXCELLENT-TESTED PROPERLY-MODEL: 52412-AIR DISC SANDER-SIZE: 3" 20.000 RPM-NOT USED MUCH AT ALL(ONLY A FEW TIMES) NPT. Min. Hose Size 3/8 In. Overall Length 6 In. Required Pressure 90 psi, Variable Speed No, Rubber Handle Material, Composite Housing Material, Lever Throttle, Locking Pad Face Type, Non-Vacuum Vacuum/Non-Vacuum Aebargains 5 for 5 all star service-We seek to bring quality pre-owned merchandise to Ebay. We describe the the merchandise we are selling to the best of our knowledge. We at Aebargains are happy to answer any questions you might have on any item. Feel free to e-mail us at anytime. We will do our best to answer your questions promptly and professionally. We ship your purchase out the same or next day of receiving a confirmed payment Mon-Fri. We pride ourselves ... moreon getting you your merchandise as soon as possible at a low shipping cost. You may also pick-up your merchandise at our store 3119 S. Dort Hwy Flint MI 48507 between 9:30-6:30. IF for any reasons you feel we have not met this criteria please e-mail us your concerns before leaving negative feedback. We will do our best to rectify the situation. Thank you for shopping and happy bidding. Design By: FreeAuctionDesigns ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ede0a6093-0x103-
|
|
|
As Is Delta Power Equipment Corp 31-140 Disc Sander 1/2 Horse Power 12"
ebay template As Is Delta Power Equipment Corp 31-140 Disc Sander 1/2 Horse Power 12" Click for more Pictures As Is Delta Power Equipment Corp 31-140 Disc Sander. 1/2 Horse Power, 12-Inch PART ONLY/ NO RETURN/ NO EXCHANGE/ NO REFUND ~ Open Box Item ~ Brand: Delta ~ Model: 31-140 ~ Condition: ~ One of the legs is broken. And the motor case is dent, so the motor would not move. One of the knobs is also damaged. Please look at the last two pictures to see some of the damages on the sander ~ There are signs of wear/use on this sander ~ What’s included: Delta 31-140 Disc Sander FOR PART ONLY/ NO RETURN/ NO EXCHANGE/ NO REFUND ~ Please Review all the pictures ~ Retail Value: $380.00 ~ 100% Authentic! Specifics: ~ Please look at manufacturer's website for product details*The digital images we display have the most accurate color possible. ... moreHowever. Due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and your screen. ~ Pictures indicate actual Item*Please click‘enlarge’ to see more pictures* HY-CH 100% Satisfaction Guarantee If there is an error between what you received and the listing. Feel free to contact us during our business hours and allow us to resolve your issues before leaving us bad feedback. Business Hours: Monday- Friday 10:00am-5pm EST Local eBay Pickup Hours: Friday: 10am- 5pm EST and Saturday 11am-4pm EST(Buyers MUST present the Paypal receipt and photo ID upon pickup. OUR PHONE NUMBER: 770-623-1808 EMail: Please Contact us through eBay Message) Sorry. But we only answer emails and phone calls during our business hours. We offer a 14 day Money back or Exchange. EXCLUDING AS-IS/ For parts items. If there is a shipping damage. Please contact us as soon as possible so we can arrange return with shipping company. THANK YOU AND HAPPY BIDDING! Please bid only if you agree on our terms. Continentail US Shipping Only. Seller reserve the right to choose method of shipping without notice. No sale outside continental US. No
|
|
|
POWERMATIC MODEL 30 BELT DISC SANDER MISC PARTS BOLTS VACUUM TRIM
POWERMATIC MODEL 30 BELT DISC SANDER MISC PARTS BOLTS VACUUM TRIM Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: Miscellaneous parts from a Powermatic belt/disc sander. Included are the main swivel clamp bolt. The angle stop rod and both limiting bolts, the two bolts holding the main casting to the stand, the upper cap on the belt sander, two trim rings for the vacuum system where tubing exits the stand(with screws) and one metal label. These are the only remaining parts of the sander other than the main base sheetmetal stand. Shipping: Priority mail insured. Payment: Paypal. MOs, checks OK. inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Dynabrade 53868 4 1/2"-7" Dia. Right Angle Disc Sander, 1.3 HP, 8,500 RPM.
Dynabrade 53868 4 1/2" 7" Dia. Right Angle Disc Sander. 1.3 HP, 8,500 RPM. This sander/grinder is in nice condition. Some rub spots on high points of teal housing. Shipping to the US only. Thank you for looking at this auction. Posted with dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13ee8a4b541-0xf3-
|
|
|
MAKITA 5" Disc Sander and Black & Decker Drill w/ sanding bit
You are bidding on a Used corded Makita 5" Disc Sander and a Corded Black and Decker Drill with a sanding bit. Both in working order. Being Sold as is. See pic#2 for details on Makita Drill. No additional info for the Black& Decker drill. Available for pick up(save on any shipping costs) Any questions about the auction feel free to email or call-Call Toll Free: 1-866-335-2733 ext 10-Ask for Matthew#50
|
|
|
Delta 6" Belt / 9" Disc Sander 1-HP Open Stand w/ Manual No. 31-695
WE ACCEPT ALL MAJOR CREDIT CARDS Please call us for Direct Payments: 818) 241-2265 Office Hours are Mon-Fri 9am-6pm and Saturdays from 9am-2pm We are located at 4587 Brazil St. Los Angeles. CA 90039 Local Pickup is also Welcome! DESCRIPTION Delta Open Stand Belt/ Disc Sander This unit was tested and found to be in excellent. Fully functioning order. Cosmetically, it is in great condition with normal signs of use. Please see my pictures for more details on the cosmetics of the item for sale. Part No. 31-695 ~ Information taken from the Manufacturer’s Website ~ Product Description The DELTA 31-695 6-Inch/9-Inch 1 HP Open Stand Belt/Disc Sander includes an adjustable 80-grit abrasive belt unit that operates vertically. Horizontally, at an angle, or can be removed for contour sanding jobs. The sander is powered by a 1 HP, 120-volt induction motor, ... morewhich runs a 9-inch disc sander that spins at 2,800 RPM. The 48-by-6-inch adjustable belt is kept in aligned by an easy-to-use belt tracking knob. It cycles at 2,200 square feet per minute across a graphite pad that reduces friction heat and preserves belt quality and life. The cast-aluminum worktable includes a miter gauge slot and tilts at 45 degrees for versatile surface work. The sander also includes a 2-1/4-inch dust port that connects to a standard shop vacuum and a steel stand with non-slip pads. Technical Details* Sander with an adjustable belt unit for vertical. Horizontal, and angled operation* 1 HP. 120-volt induction motor spins 9-inch disc sander at 2,800 RPM* Graphite belt pad reduces friction heat and preserves belt life* Measures 29 x 16 x 15 inches* Weighs 91.5 pounds_ Shipping: Due to the size and weight of the item. We are offering LOCAL PICK UP or FREIGHT SHIPPING- Please email us for freight shipping estimates- We ship worldwide! Salesbaron is in Los Angeles. 90039 SL PAYMENTS We accept PayPal and all major credit cards. Please contact us for direct credit card paymen
|
|
|
LOCAL PICKUP AS IS POWERTEC BD6900 Belt Disc Sander Built In Dust Collection
ebay template LOCAL PICKUP AS IS POWERTEC BD6900 Belt Disc Sander Built In Dust Collection. Click for more Pictures LOCAL PICKUP AS IS POWERTEC BD6900 Belt Disc Sander with Built-In Dust Collection Brand: PowerTec Model: BD6900. Features: Motor: Induction. 120V, 60 Hz, 1-1/5 HP(peak) 7.5 Amps. Aluminum working table 7-Inch x 10-Inch Belt size: 6-Inch x 48-Inch Belt Platen Area: 6 x 13-1/2-Inch Belt Speed: 2400 FPM Disc Diameter: 9-Inch Disc Speed: 3100 RPM, Condition: Open box. Used, item turns on but the motor is dislodged. Pictures 7-9 shows the stratches,dents, and cuts of the sander What you get: POWERTEC BD6900 and accessories shown on images. Parts/accessories not shown on images are not included with this listing. Retail value: $229.99. THIS IS A LOCAL PICKUP ITEM. YOU OR YOUR PREFERRED SHIPPING CARRIER WILL HAVE TO PICK UP THE ITEM ... moreFROM OUR WAREHOUSE. Item location: Duluth GA. 30096. Item weight(pounds) 84. Item dimension(inches) 26 x 31 x 21. Please inspect your item when picking up. Once the item leaves our warehouse we will not provide return/exchange/refund services regardless of reason. ~Please review pictures for the actual item(s) What you see is what you get! ~Our listed products are 100% genuine. Specifics: Please look at manufacturer’s website for product details* The digital images we display have the most accurate color possible. However. Due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and your screen. ~Pictures indicate actual Item*Please click‘enlarge’ to see more pictures* BL& EE 100% Satisfaction Guarantee If there is an error between what you received and the listing. Feel free to contact us during our business hours and allow us to resolve your issues before leaving us bad feedback. Business Hours: Monday- Friday 10:00am-5pm EST Local eBay Pickup Hours: Friday: 10am- 5pm EST and Saturday 11am-4pm EST(Buyers MUST present the Paypal receipt and photo ID upon pickup. OUR PHONE NUMBER: 770-623-1808 EM
|
|
|
LOCAL PICKUP AS IS Delta Power Equipment Corp 31-140 Disc Sander 1/2 HP
ebay template LOCAL PICKUP AS IS Delta Power Equipment Corp 31-140 Disc Sander 1/2 HP. Click for more Pictures LOCAL PICKUP AS IS Delta Power Equipment Corp 31-140 Disc Sander 1/2 HP Brand: Delta. Model: 31-140. Features: Dust collection draws from under the table. 2 1/2in OD attaches quickly to any standard shop vac or dust collector Cast Iron Base with pre-drilled holes for easy bench mounting Condition: Open box. Item powers on but motor only hums(doesn't run) item is dirty but is in acceptable cosmetic condition for an item of its class. What you get: DELTA disc sander shown on images. Parts/accessories not shown are not included with this listing. Retail value: $379.99. THIS IS A LOCAL PICKUP ITEM. YOU OR YOUR PREFERRED SHIPPING CARRIER WILL HAVE TO PICK UP THE ITEM FROM OUR WAREHOUSE. Item location: Duluth GA. 30096. Item weight(pounds) ... more75.9. Item dimension(inches) 22 x 18 x 19. ITEM IS SOLD AS IS/FOR PARTS. NO RETURN/EXCHANGE/REFUND! ~Please review pictures for the actual item(s) What you see is what you get! ~Our listed products are 100% genuine. Specifics: Please look at manufacturer's website for product details* The digital images we display have the most accurate color possible. However. Due to differences in computer monitors, we cannot be responsible for variations in color between the actual product and what you see on screen. ~Pictures indicate actual item(s) Please click"enlarge" to see more pictures* JL& EE 100% Satisfaction Guarantee If there is an error between what you received and the listing. Feel free to contact us during our business hours and allow us to resolve your issues before leaving us bad feedback. Business Hours: Monday- Friday 10:00am-5pm EST Local eBay Pickup Hours: Friday: 10am- 5pm EST and Saturday 11am-4pm EST(Buyers MUST present the Paypal receipt and photo ID upon pickup. OUR PHONE NUMBER: 770-623-1808 EMail: Please Contact us through eBay Message) Sorry. But we only answer emails and phone calls during our business hours. We offer a 14 day Money bac
|
|
|
#JDS-20-3 JET 20" Disc Grinder / Sander (New 1997)
Preowned 20" JET Disc Grinder. Model: JDS-20-3, S/N 7120014(New 1997) Disc size Table size Table tilt Disc speed 20" 27-1/2" x 10-3/8" 45 degrees out; 30 degrees in 1.725 R.P.M. Equipped With: Direct motor drive Handwheel for manual adjustment of table height Handwheel for manual adjustment of table tilt Cabinet with assorted discs(as shown in photos) 2 H.P. 3/60/230-460 volt drive motor and starter switch Machine is wired for 230 volt operation. Approximate Weight(Machine Only) 500 Lbs. Approximate Dimensions(Machine Only) 29" L-R x 28" F-B x 48" H, We Ship Worldwide- F.O.B. Truck. Hauppauge- Long Island, NY)
|
|
|
HOOVER 12" DISC PEDESTAL SANDER / GRINDER
aims HOOVER 12" DISC PEDESTAL SANDER/ GRINDER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Motor is Made by Hoover. This is a Disc Sander/ Grinder. Wiring needs repair. Selling AS IS. To the best of my knowledge. The specifications I've provided are correct but please verify or inspect machine first hand. The machine can be inspected by appointment. Unit is being sold as is and our normal return policy does not apply. Specifications: Disc Size: 12" Table Size: 14-1/2" x 9" Motor: 3/4 Horsepower. 208-220/440 Volt, 1,725 rpm, Three Phase. Overall Dimensions: 24" x 24" x 38" tall. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, ... moreplease check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. HOOVER 12" DISC PEDESTAL SANDER/ GRINDER HOOVER 12" DISC PEDESTAL SANDER/ GRINDER HOOVER 12" DISC PEDESTAL SANDER/ GRINDER HOOVER 12" DISC PEDESTAL SANDER/ GRINDER HOOVER 12" DISC PEDESTAL SANDER/ GRINDER Reliable Tool Inc. c 2011 | Powered by
|
|
|
Dynabrade 52563 7" (178 mm) Dia. Right Angle Disc Sander NO RESERVE
used. tested. works 100% great sander
|
|
 |