In 
 
Order by: 
Available to: 
Price: 
 - 
$
98
6d 4h 38m 55s
0 bids
Free Shipping
Condition: New
Location: Tallahassee,FL,USA
$
79.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new USAWELD welding gun to fit the following Century Mig Welders: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 117-076(Century 125 GS. Century 125 GL, Century 83125 and Century 83126) 117-077(Century 83136. Century 83137, Century 135 GL, and Century 135 GS) 117-078(Century 83155. Century 83156, Century 155 GL, and Century 155 GS) 117-079(Century 83170. Century 83171, Century 170GL, and Century 170 GS) 117-084(Century 83155) This gun is a direct replacement welding gun. And it is 10 ft long. 2nd phto shows the connection for the welding current, and the 3rd photo shows the trigger wires, which are 2 spade terminals. This gun uses the small 4mm OD plastic gas hose. The gas valve is in the handle. This gun replaces the following Century part numbers: 238-566-000 238-566-666 238-567-000 238-567-666 238-592-000 238-592-666 238-593-000 238-593-666 Save even more– Mig. Tig and Plasma parts ship FREE with this welding gun. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the welding gun. Save on shipping by combining purchases with other Mig or Tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Again. If you want a shipping discount on multiple
$
14.23
Buy It Now
$0 Shipping
Condition: New
Location: Aurora,IL,USA
$
179.8
Buy It Now
$0 Shipping
Condition: New
Location: Russian Federation
$
25
Buy It Now
$0 Shipping
Condition: New
Location: Wilmington,DE,USA
$
73.99
Buy It Now
$0 Shipping
Condition: New
Location: Big Spring,TX,USA
$
69.95
Buy It Now
$0 Shipping
Condition: New
Location: Bellingham,WA,USA
$
99.99
Buy It Now
$0 Shipping
Condition: New
Location: China
$
297.99
Buy It Now
$0 Shipping
Condition: New
Location: George West,TX,USA
| | | | Click to close full size. Snap-on Adjustable High Definition Auto Darkening Welding Helmet YA4601. Make: Snap-on Model: YA4601 Condition: Used/Lightly ... moreUsed- This item has been used but is still in decent condition. This item will be working mechanically(if applicable) but can have some signs of wear to the exterior(Ex. Light scratches. Scuffs or marks) Auction includes: Welding helmet. Box, protective bag, and instructional book Guarantee: 30 Day satisfaction guarantee. Sales tax must be collected for all Texas. Tennessee, Illinois, Washington, Nevada, and Florida buyers. We are unable to accept orders from resellers. 6001 22215.2 CD Order: 45625 About Us Cash America Internet Sales. Inc. is an affiliate of Cash America International, a NYSE company. Cash America has been operating pawnshops and providing specialty financial services for more than 25 years. Cash America currently has more than 1,000 locations in the United States and Mexico, operating under the brand names Cash America Pawn, SuperPawn, Cashland, and Prenda Facil. Please browse through and bid on our items with confidence. Our primary focus is customer satisfaction. Please contact us during or after the auction as we will do as much as possible to ensure satisfaction. All items will be shipped quickly and professionally. We make the buying experience as easy as possible to earn your positive feedback. Feel free to email any questions not answered in the listing. Shipping We ship to all fifty states and any country listed in ebay's Global Shipping program. This item will be shipped via USPS Priority or UPS ground for large items. Shipments will only be made to confirmed PayPal addresses. US Shipping Our goal is to ship within three(3) days of PayPal receipt of payment. And we guarantee it will leave our store within three(3) business days. Shipping time with UPS Priority is generally 2-6 business days and we will email the tracking information when shipment is made. Expedited shipping is available for additional costs at the buyer's
$
454
9d 18h 53m 17s
0 bids
Free Shipping
Condition: New
Location: Georgetown,KY,USA
$
9.36
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
189.87
6d 19h 33m 52s
0 bids
$10.1 Shipping
Condition: New
Location: Canada
$
190
Buy It Now
Free Shipping
Condition: New
Location: Salt Lake City,UT,USA
$
199.01
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
249
Buy It Now
$0 Shipping
Condition: New
Location: Saylorsburg,PA,USA
$
219.99
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
17.01
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
66
Buy It Now
Free Shipping
Condition: New
Location: Alpena,MI,USA
$
14.99
Buy It Now
$0 Shipping
Condition: New
Location: Costa Mesa,CA,USA
$
56
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
248.61
Buy It Now
$100.63 Shipping
Condition: New
Location: Ireland
$
218
4d 7h 2m 29s
0 bids
$0 Shipping
Condition: New
Location: China
$
170
Buy It Now
$35 Shipping
Condition: New
Location: Vietnam
$
59.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
389
6d 19h 50m 46s
0 bids
$0 Shipping
Condition: New
Location: Goleta,CA,USA
$
115.3
Buy It Now
$16.2 Shipping
Condition: New
Location: Latvia
$
218
4d 7h 2m 49s
0 bids
$0 Shipping
Condition: New
Location: China
$
350.51
Buy It Now
$97.77 Shipping
Condition: New
Location: United Kingdom
$
85.3
6d 13h 50m 32s
0 bids
$0 Shipping
Condition: New
Location: Dayton,NJ,USA
$
29.99
Buy It Now
$0 Shipping
Condition: New
Location: Claremont,CA,USA
$
26
Buy It Now
$0 Shipping
Condition: New
Location: Atlanta,GA,USA
AWS A 5.1-0 4: E7018 SIZE: 3/32" x 14" length W eight: 10 lbs High Q uality welding rod! jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-1405a5f461c-0x100-
$
198.5
Buy It Now
$0 Shipping
Condition: New
Location: New Bedford,MA,USA
$
299
Buy It Now
$0 Shipping
Condition: New
Location: Hicksville,OH,USA
$
195
Buy It Now
$0 Shipping
Condition: New
Location: Schaumburg,IL,USA
$
48.89
Buy It Now
$0 Shipping
Condition: New
Location: China
$
189.95
Buy It Now
$0 Shipping
Condition: New
Location: Monroe Township,NJ,USA
$
225
Buy It Now
$0 Shipping
Condition: New
Location: China
$
196.99
Buy It Now
$0 Shipping
Condition: New
Location: Canada
$
129.99
Buy It Now
Free Shipping
Condition: New
Location: Tampa,FL,USA
NEW IN BOX-WELDCOTE METALS-AUTO DARKENING WELDING HELMET- MAIN SPECIFICATIONS: 1. FILTER DIMENSION 114 X 133 X 9.5 MM 2. VIEW AREA 100 X 60 MM 3. LIGHT ... moreSHADE NUMBER 4 4. DARK SHADE NUMBER 9-13 5. UV/IR PROTECTION UP DIN15 6. TIME FROM LIGHT TO DARK 1/10000 S 7. TIME FROM DARK TO LIGHT 0.1- 0.9 S 8. SENSITIVITY/ DELAY ADJUSTABLE STEPLESS 9. POWER SUPPLY SOLAR CELLS& REPLACEABLE BATTERY 10. OPERATING TEMPERATURE-10 DEGREE C-55 DEGREE C(14 DEGREE F- 131 DEGREE F) 11 WARRANTY 3 YEARS THE HELMET WEIGHS 3LBS 6 OUNCES PACKED IN A SHIPPING BOX. TO GET A CHEAPER SHIPPING RATE, I COULD SHIP THIS WITHOUT A SHIPPING BOX, IT WOULD BE UP TO YOU AND HOW YOU WANT ME TO SHIP IT. ANY QUESTIONS. PLEASE ASK THANKYOU AND HAVE A GREAT DAY: ALL MERCHANDISE COMES FROM SMOKE FREE HOME. ITEMS ARE NON REFUNDABLE UNLESS SOMETHING IS WRONG THAT I HAVE NOT STATED. SO PLEASE MEASURE ACCURATELY. IF YOU ARE RETURNING SOMETHING, PLEASE CONTACT ME BEFORE DOING SO. ALSO IF THERE ARE ANY PROBLEMS CONTACT ME, WE CAN WORK SOMETHING OUT. SHIPPING CHARGES ARE BASED ON WHERE YOU LIVE AT AND HOW MUCH PACKAGE WEIGHS. I SHIP FIRST CLASS MAIL. PARCEL POST AND PRIORITY, WHICH EVER WAY IS CHEAPEST, I WILL SHIP IT, UNLESS OTHERWISE NOTED. IF YOU WIN MORE THAN ONE AUCTION. PLEASE WAIT FOR A COMBINED INVOICE TOTAL BEFORE PAYING. CHECK OUT MY OTHER ITEMS. AS I LIST FREQUENTLY AND ADD ME TO YOUR FAVORITES. IF YOU NEED OTHER PICTURES. SEND ME YOUR EMAIL AND WHAT YOU WOULD LIKE TO SEE AND I WILL BE MORE THAN HAPPY TO SEND THEM TO YOU. THANKS FOR STOPPING AND LOOKING AND HAVE A GREAT DAY.
$
171.36
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
99.99
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
63
Buy It Now
$0 Shipping
Condition: New
Location: Saylorsburg,PA,USA
$
80.54
Buy It Now
$0 Shipping
Condition: New
Location: China
$
185.99
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
193.91
6d 19h 33m 51s
0 bids
$0 Shipping
Condition: New
Location: Canada
$
85.01
Buy It Now
$0 Shipping
Condition: New
Location: China
$
18.99
Buy It Now
$0 Shipping
Condition: New
Location: Bellflower,CA,USA
$
300
Buy It Now
$0 Shipping
Condition: New – Open box
Location: New Caney,TX,USA
$
27.99
Buy It Now
$0 Shipping
Condition: New
Location: Walton,KY,USA
$
464.96
Buy It Now
$0 Shipping
Condition: New
Location: China
$
283
Buy It Now
$0 Shipping
Condition: New
Location: Chicago,IL,USA
$
189
Buy It Now
$0 Shipping
Condition: New
Location: China
$
109.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. The invoice will be in your“My E-bay” Buying” Won” area. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a BRAND NEW DUAL HTP Flowmeter which is perfect for Mig and Tig Welding. Flow Meters are more accurate than the flow gauge regulators. The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi. And this flowmeter does not use a diaphragm. So it is more reliable than the flow-gauge style regulators. Cut from the same mold as our original HTP flowmeter that you already know and love. And remember. Not all flowmeters are created equal. They may look the same on the outside, but the others do not have HTP Quality on the inside. This flowmeter is perfect for hooking up the same tank to multiple machines or if you want to backpurge and don't have a second tank to do so. The output flow is adjustable from 10 to 60 cfh(cubic feet per hour) And is indicated by a ball which moves up and down in the flow tube, so this flowmeter will handle MIG and TIG welding both steel and aluminum. The fitting is a CGA-580 fitting. So it fits all argon, helium, nitrogen, and argon/CO2 mixed gas tanks. This does not fit CO2 cylinders. If you want a CO2 Flowmeter see our auction for those. A very nice thing about this Flowmeter is the outlet will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. You can see the adapter in the picture. It comes with a standard 5/32"
$
47.39
Buy It Now
$0 Shipping
Condition: New
Location: Walton,KY,USA
$
82.99
Buy It Now
$0 Shipping
Condition: New
Location: Rochester,MI,USA
$
69.5
Buy It Now
$0 Shipping
Condition: New
Location: Atlanta,GA,USA
$
84.99
Buy It Now
$0 Shipping
Condition: New
Location: Houston,TX,USA
$
79.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new USAWELD welding gun to fit the following Sears Craftsman Mig Welders: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Sears Craftsman Model 20511(117-076) Sears Craftsman Model 20559(117-078. 117-084) This gun is a direct replacement welding gun. And it is 10 ft long. 2nd ph0to shows the connection for the welding current, and the 3rd photo shows the trigger wires, which are 2 spade terminals. This gun uses the small 4mm OD plastic gas hose. The gas valve is in the handle. Save even more– Mig. Tig and Plasma parts ship FREE with this welding gun. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the welding gun. Save on shipping by combining purchases with other Mig or Tig parts and paying for all items with one combined payment. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Again. If you want a shipping discount on multiple items, do not pay for any items. And we will send you an invoice. Separate payments for each item by PayPal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorre
$
74.92
Buy It Now
$0 Shipping
Condition: New
Location: Rowland Heights,CA,USA
$
68.78
Buy It Now
$0 Shipping
Condition: New
Location: Aurora,IL,USA
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
 In 

Past Items  
 
PRESTOWELD OLD BRASS OXY-ACETILINE CUTTNG WELDING TOR CH AS PICTURED IT'S UNTESTED SO IS LISTED IT AS PARTS THE CON TROLS ARE ALL FREE 1 KNOB IS NOT ORIGINAL UNTESTED GOOD LUCK!
VICTOR 8 MFA Rosebud 0323-0252 Acetylene Oxygen Tested Yr Warranty Cutting Torch VICTOR 8 MFA Rosebud Can be Used with Oxy Acetylene or Hydrogen. Buy With Confidence Genuine Victor! Fully Tested! 14 Day Money Back Guarantee! 1 Year Warranty! Super Fast Free Shipping! Multi-flame heating head for heat treating. Straightening, and priming Individual spiral mixer Brass coupling nut with built-in snap ring Double O-ring seal Flame and leak tested This is a genuine Victor size 8 MFA rosebud in almost new condition. The O-rings and cone end are in excellent condition. No dings or leaks! Fits all Victor 300 series torch handles(larger journeyman size handles) I think this rosebud is clean enough on the inside and outside that you could stir your coffee with it. Take a look at the photos and see if you agree. Victor part number 0323-0252. Yep! There ... moreare cheaper rosebuds listed on eBay this week. But don’t settle for cheap junk made in China! This is a genuine Victor rosebud in almost new condition. I do not think you will find a nicer used Victor rosebud anywhere! If you are looking for a quality Victor rosebud with a 14-day money back guarantee and a extra 1-year warranty, from an experienced and reputable eBay seller, this is the rosebud for you! Victor's retail list price is $169.00, plus sales tax in most states. Here is your chance to make your life easier! You can now purchase this item at a fraction of the retail price and save a lot of money! Buy It Now For Only $79.99 and Save Over $89.00 Includes Free Shipping. Insurance and a 1 Year Warranty. Don’t get burned and risk your safety buying used welding items off eBay that are not guaranteed and have not been properly tested. Any Questions? Call Rick at(801) 759-5483 anytime Please Review My Feedback Click on the underline and buy with confidence. I only offer good quality new and used tools in top condition you will be proud to own! Visit My eBay Store Please click on the underlined and take a look at my other similar items! PayPal PayPal is an easy pay
Victor 250-80-540 Compressed Gas Oxygen Regulator Gauge 3000 PSIG You are bidding on a pre-owned Victor 250-80-540 Compressed Gas Oxygen Regulator Gauge 3000 PSIG in GOOD condition. Shows minimal signs of use. Gauges have a lot of scratches and scuffs on them. Please feel free to ask any questions you may have about this item and I can help as best as I can! Thank you for looking. Auction Includes: Oxygen Regulator Gauge All items listed above! See photos! SHIPPING Outside of the Continental 48 States or to PO Box. FPO& APO may be higher shipping cost. NO INTERNATIONAL SHIPPING. I ONLY SHIP WITH IN US. Must have a US Paypal account if paying through Paypal. Colorado Residents must pay sales tax if picked up or shipped. Non-Residents also pay local sales tax for pick-ups. Payment through PAYPAL or pickup in person only. Thank you. Pay ... moreme securely with any major credit card through PayPal!
Victor SR 460A Heavy Duty Welding/Cutting Acetylene Regulator Gauge You are bidding on a pre-owned Victor SR 460A Heavy Duty Welding/Cutting Acetylene Regulator Gauge in GOOD condition. Shows minimal signs of use. Please feel free to ask any questions you may have about this item and I can help as best as I can! Thank you for looking. Auction Includes: Acetylene Regulator Gauge All items listed above! See photos! SHIPPING Outside of the Continental 48 States or to PO Box. FPO& APO may be higher shipping cost. NO INTERNATIONAL SHIPPING. I ONLY SHIP WITH IN US. Must have a US Paypal account if paying through Paypal. Colorado Residents must pay sales tax if picked up or shipped. Non-Residents also pay local sales tax for pick-ups. Payment through PAYPAL or pickup in person only. Thank you. Pay me securely with any major credit card through ... morePayPal!
Up for bid is this Prest-o-Lite acetylene wrench. It has many applications including tanks and acetylene lighting tanks on old motorcycles. It measures 3" long and is in very good condition. Ships to USA only and no reeturns. PayPal only.
This is a vintage set-includes POL N o1 S tem and M ixer A ssembly. POL No4-9 S tem and M ixer(plumber's outfit) POL9 Fla me Spreader and Mixer Assembly. Latch on case works. All threads on torches are in perfec t condition. Two of the torches have the filter screen and retaining ring. The flame spreader is missing the filter screen and ring.
Aircraft airplane pilot oxygen tank cylinder markings( icc3aa1800 d16010 msaco) has a cga 520 cga520 fitting. This is in very good condition. And I will accept return less reasonable shipping per details below. Posted with
Up for bid are these 2 Uniweld Series Regulators for Acetylene. The third one is a bonus. Guages are bad on the 2 Uniweld but good on the bonus. The 2 Torches are Universal brand. These are in well used condition and were working when removed from the tanks. PLEASE ADD ME TO YOUR FAVORITE SELLERS AND CHECK OUT MY OTHER AUCTIONS. I USUALLY HAVE A MIX OF ALL KINDS OF NEAT THINGS. Shipping cost for this item will be from ZIP 35983. I ship to the lower 48 states only unless noted in the description. I live in a rural area and only ship on Tuesdays and Thursdays. Please consider this when bidding. I will do my best to make your transaction a pleasant and rewarding one. Bid with confidence. Check my feedback. IF YOU HAVE ANY QUESTIONS PLEASE E-MAIL ME. THANKS FOR LOOKING. HAVE A GREAT DAY AND HAPPY BIDDING. PLEASE NOTE THE FOLLOWING: Your BID is ... morea CONTRACT; This E-Bay Auction is a buying contract. I reserve the right to cancel bids from any bidder with a history of negative feedback or less than 5 feedbacks. PAYMENT; I accept the following forms of payment: 1. PayPal Prefered- All major Credit Cards through Paypal. Paypal payment requires shipping to a confirmed address only. 2. I also accept M.O.s and Cashiers Checks. SHIPPING; All products are shipped via UPS or United States Post Service(USPS) Unless otherwise stated shipping is at your(the buyer's) expense. 2. Insurance and tracking will be included in the shipping cost to all orders going to contiguous 48 states. 4. I do not ship to APO addresses. RETURN and WARRANTY; 1. Please contact me within 1 business day if the order arrives damaged. Bidding agreement; Please help me to make the transaction smoother and more efficient by including the E-Bay item number and your e-mail address in any correspondence. If payment message is not received within 3 days or payment is not made within 3 business days of auction end date. The auction will be considered closed and a non paying bidder notice will be filed with e-bay.
YOU ARE BIDDING ON A Used Acetylene Regulator Uniweld MC-17 Small Size Acetylene Regulator(This regulator does not defy gravity- The 1st picture makes it look like it does) Tested. And it works great Please add $6.95 for shipping. Packaging and handling. Slightly more for Canadian bidders. Paypal is preferred. Thanks Brian Let me know if you have any questions! This item has been gone thru by our repair facility repairman-Don. Rebuilt if necessary and tested thoroughly. We are a dealer for Victor Parts. Thanks for looking.
THIS IS FOR A VICTOR CA1250 CUTTING ATTACHMENT. THE SERIAL NUMBER IS 02316. THIS HAS A TIP ON IT. THIS IS IN GOOD USED CONDITION. IF THIS ITEM IS NOT AS DESCRIBED YOU MAY RETURN IT WITHIN 7 DAYS FOR FULL REFUND OF WINNING BID THE SHIPPING IS NON-REFUNDABLE THE BUYER TO PAY FOR RETURN SHIPPING ANY QUESTIONS PLEASE EMAIL ME HOPE YOU HAVE A WONDERFUL DAY
THIS IS A VICTOR CGA-580 HSR2570 REGULATOR GOOD CONDITION# Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if ... moreit is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item3. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13eafd92b69-0x100-
THIS IS A HARRIS 25-50C CGA-510 REGULATOR MISSING LENS COVER# Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase ... moreif it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item4.
THIS IS A HARRIS 2500 CGA E-4 CGA-540 REGULATOR LOOKS IN GOOD CONDITION. Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of ... morepurchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item4.
lot of 4 three regulator oxygen guages gauges have never been tested guages might work these item are solid brass they are being sold as parts or repair pay with paypal ship usa only 1 of the regulators has no gauges this item can be sold at a scrap yard because they are solid brass these are worth a lot of money if you had to buy them new one set of gauges is well worth 25 bucks
SquareTrade © AP6.0 Victor Oxy Acetylene Cutting Torch CA2460 03/B18794A click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge click to Enlarge Description: Up For Auction Welcome and thank you for visiting our auction! In this auction we have a used Victor Oxy Acetylene Cutting Torch- CA2460. The torch is in good condition as you can see from the pictures. Get this cutting torch for a great price here at houstonbayou! See pictures for more details. Only pictured items are included in the auction. Local pick up is FREE in Houston. Texas 77055. Please examine photos before bidding. I put magnified photos on here so that you can see every detail. Happy Bidding! Shipping: We pay to insure any item that sells for over $250. No charge to the buyer and signature ... moreconfirmation is required. Sorry- No international shipping! This includes Canada and U.S. territories! Buyers in Alaska and Hawaii- contact us for additional shipping charges if the item will not fit in a flat rate box. Sometimes it appears it will fit but with packing it won't so please contact us if you are unsure. Hawaii and Alaska residents must ask for an invoice for actual shipping before paying for item. Local Pick up is FREE! We are located in the Spring Branch area of Houston near Antoine and Long Point. Please write for an address and an invoice that does not include shipping cost if you want to pick up your item. We will only ship to confirmed PayPal addresses. We ship on Mondays. Wednesdays& Fridays ONLY. Questions: Monday to Friday 8:30 A.M. to 4:30 P.M. CST O ur stores are open during the above hours and our Ebay staff is available during those hours. On weekends our Ebay director will be checking messages periodically if possible. If you are inquiring on a weekend or after hours please at least allow us until Monday to respond to your message. We value our customers and strive to provide you with the best customer service possible. Payments: In complian
This is an Airco Oxy-Acetylene Welding Torch. Style No 9100. The hoses are about 80 inches long. The torch piece states that it is an Airco Style 919 No. 1. This is an Estate find and is untested. Please feel free to ask questions and thanks for your interest!
heres a lot of oxyweld brand torches for parts and 3 regulators not sure if the regulators work or not they could be rebuilt shipping will be actual price it costs
The torch has just been rebuilt. The torch has a propane tip. Shipping international will be addditional cost.
Used and nice acetylene regulater. Nice clear lenses.Marquette brand.works great! Posted with
Henrob 2000 Cutting Torch& Accessories*NO RESERVE* VERY FAST FREE SHIPPING*Professionally Packaged* This Cutting torch and accessories are in used condition. It has been tested and is ready to use. Cosmetically it shows wear consistent with normal use as you can see in the pictures. This auction includes everything you see in the pictures. This auction does not include any other accessories. Please view each picture carefully so you know what you are bidding on. Thank you for looking and check out the other merchandise at our eBay store and we also invite you to visit our website. I-6771 Check out my! NOTICE If for any reason you cannot leave us a 5 star rating. Please contact us before leaving your feedback and give us the opportunity to fix any issue you may have. We DO NOT end auctions early or accept“Buy It Now” offers unless noted ... morein the auction! Items have a seven day return policy unless posted differently in the auction. Shipping Information We ONLY ship inside the U.S. Please don’t ask. We ship ONLY with UPS or U.S. Postal! We DO NOT ship to APO. FPO or PR! ALL items are insured! Free Shipping applies to the CONUS only. Contact us for shipping rates to HI. AK, or PR. For items sold at $200& Above. Delivery Confirmation is Required. VERY IMPORTANT! If you receive an item that appears to be damaged. Please retain the original packing materials and the box it was shipped in. If you do not do this, it is difficult to file a claim with the shipping company& process a refund. Contact Us We answer our emails daily. This is usually the best way to reach us. If you ask a question on Saturday/Sunday. We make every effort to answer it that day. However, sometimes the item is not physically available to us and may have to be answered Monday morning. If you wish to call. PLEASE call us during our Ebay hours at: 919) 226-0324 Ebay Hours are: Monday– Friday 9:00am– 5:00pm If you ask
The regulator and torch are used and show some wear but still in good working condition. Shipping international will be additional cost.
Linde oxygen gauge.Nice clear gauge lenses! Works well. Heavy duty!all threads are nice! Posted with
It's used. Looks used, but is in good working condition. I am listing other Victor products, and I do combine shipping, so take a look at my other items-11alicia28. Feel free to inbox me with any questions, and thank you for looking.
Regulator is in good working order. I am listing other Victor products. And I do combine shipping, so take a look at my other items-11alicia28. Feel free to inbox me with any questions, and thank you for looking!
TURBO TORCH" HEAD. GAUGE, HOSE& 18" TALL X 6" DIAMETER ACETYLENE TANK FOR PLUMBING JEWELRY SOLDERING TANK IS EMPTY(REQUIRED FOR SHIPPING) Check out my! Be sure to add me to your! WE GLADLY COMBINE SHIPPING! E5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13eb0d2ce60-0xfa-
BUY IT NOW Very nice cutting torch. As can be seen by the photos. This torch has not been used much. If you have questions about this auction– PLEASE ask before you buy. I’ll try to respond right away. I DO NOT ACCEPT E-CHECKS. Please be sure you have enough funds in your PayPal account to cover your purchase. If you have zero feedback please contact me before bidding. Before buying please read my Payment. Refunds and Feedback information. Thanks for looking. PAYMENT I accept PayPal and item must be paid for immediately. I will also accept a check from USA buyers only. At this time I do not accept e-checks through PayPal. Item ships immediately through United States Postal Service and includes delivery confirmation. International buyers: item ships via Express Mail International as it is currently the only method that provides delivery confirmation. ... moreREFUNDS If you are not satisfied with your purchase. I will gladly refund your purchase price on most items within 14 days. Return shipping is at your expense and item must be in exact condition as it was shipped to you. Please contact me before returning any item to try to resolve any problems. My number one goal is customer satisfaction. FEEDBACK I want to leave positive feedback for all my customers. If you have an issue with the transaction. Please contact me BEFORE leaving neutral/negative feedback. I care about my customers and want your buying experience to be a good one. Normal 0 false false false EN-US X-NONE X-NONE
SPRING CLEAN OUT.I'VE NEVER"USED" THEM.HAD THEM IN STORAGE FOR LOTS OF YEARS AS A BACK/UP. MARQUETTE TORCH BRAZING SET NUMBERS ARE, ONE/TWO/TWO THREES AND A FIVE.AS FOR THE OXY- ACETYLENE GAUGES I HAVE NO CLUE WHO MAKES THEM,I'M SURE THEY'RE NOT MARQUETTE.
Used Victor VTS 700ME regulator is marked for Air. Inert, and Oxygen Service, Max In let 3000 PSIG. This model is listed online as a heavy duty. Two-stage regulator, 10-200 psig delivery pressure range. Gauges read 0- 400 and 0- 4 000. Cosmetically in good condition. But w e do not have the knowledge or equipment to inspect this item. Selling untested. When new. Th ese retail for over $1000. Also Linde Company regulator type R-1923 R-205 also gauges read 0-4000 but smaller inlets. Hoses are 250psi 5/16. Professionally paced and shipped.
Up for sale I have a like new Victor Long Barrel Torch MT210 it as been used a couple times item will come with a new tip. Product# VCT-MT-210 MT 200 Series Two hose Machine Cutting Torch for use with acetylene and other pressurized gases. Cut Capacity: 7" • Overall Length: 14" • Pre-Drilled 1-3/8" Diameter Barrel • Lever Activated Oxygen Cutting Stream Uses series 1 cutting tips. PLEASE CHECK MY OTHER AUCTIONS FOR SIMILAR ITEMS THANK YOU!
I am listing this item as used but I think it is new but dirty from sitting on shelf for years. Union Carbide Corp. Linde Division. Permanent Magnet Motor 110 VDC, Part# 18340, Motor Data E67286, Model EH-9, Type 3354-270
VICTOR TRACK CUTTING MACHINE WITH VICTOR MACHINE TORCH MODEL VU-150 IN GOOD CONDITION THIS MACHINE ALSO HAS A VICTOR MACHINE TORCH WITHOUT A GEAR RACK ALSO INCLUDED IS A PIECE OF 6 FT. USED TRACK IN GOOD CONDITION THIS IS A GOOD WORKING MACHINE GUARANTEED TO BE GOOD SHIPPING IS APPROXIMATE AS THIS HAS TO SHIP IN TWO BOXES WITH THE TRACK COMPLETE PACKAGE ALL YOU NEED IS GAS AND OXYGEN SUPPLIED TO MANIFOLD AND YOU ARE READY TO CUT
Up for auction is a nice clean regulator for welding with OXYGEN. This is nice and clean. The gauges very easy to read. This is in excellent condition. The regulator is green. Says OXY on back. You will receive the exact item shown in the photo– no surprise substitutions. Look at the pics– and ask questions- I’ll respond! We will do a careful. Conscientious job packing and protecting the item from the shippers at USPS. We are aware that they take pride in breaking our precious cargo! Nevertheless. Shipping will be USPS at our option. The flat rate for shipping AND CAREFUL PACKING AND HANDLING will be $8.99 to the lower 48 states only. That will cover the cost of shipping. Insurance, handling and packing materials. Click“View seller’s other items” now for more great deals! No Local Pickup- NO INTERNATIONAL SHIPPING- AK. HI, PR, APO& US ... moreTerritories BIDDERS EMAIL FOR BID APPROVAL AND A SHIPPING QUOTE- RETURN POLICY: If you are unsatisfied for any reason. We will refund the total that you paid to us(final bid price plus shipping. You must contact us and return the item within 14 days of receipt. The item must be in the same condition that you received it. You pay return shipping. Shipping will be USPS. WE SHIP TO THE LOWER 48 US STATES ONLY WITHOUT PRIOR BID APPROVAL! No military or APO addresses without prior bid approval. Payment by PayPal only. PayPal payments must have a confirmed shipping address. We ship only to the confirmed PayPal address. A non-paying bidder reminder will be sent after three days. Please make arrangements to have the item paid for within three days of purchase or it will be subject to re-listing.
A set of torch regulators for Acetylene and oxygen. Used but in working condition and the acetylene regulator has a cracked glass on one of the gages. Also included is a pair of goggles and three strikers.
Meco welding wrench 4 5/8 inch length 3/8 inch square 5/8 inch 6 point 13/16 and 7/16 inch open end wrench we use recycled materials for packing combine shipping check my other listings international bidders; e-mail me for shipping quote before bidding. And pay after You receive invoice absolutely not responsible for foreign country customs: retards. Detains, lags, tardiness, delays, and slow downs buyer is responsible for all duty and customs fees
THIS IS A USED SMITH REGULATOR H1722C-510 LOOKS IN GOOD CONDITION# Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase ... moreif it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item1. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13eb3a69fe6-0xff-
VICTOR" THIS IS A BUNDLED LOT OF WELDING EQUIPMENT. 1) VICTOR VTS 450 D. Regulator) 1) VICTOR VTS 460 A. Regulator) 1) CRAFTSM AN 650 L. Regulator) 1) WELDING HELMET. 12) TIPS. 1) TURBO TORCH HAND LE. 1) FIREPOWER WELDING HANDLE. 1) VICTOR WELDING TORCH HANDLE. 9) PX 54A GAS DIFFUSERS. AND A BUNCH OF OTHER STUFF THAT I DO NOT KNOW WHAT T HEY ARE(SEE PIC TURES)
Vintage Victor Welding Brass Regulator& Gauges- San Francisco- SR 95. Appears to be in good condition. Nothing broken, but I have no way to test. It is very old and needs cleaning.
Victor fc100 cutting torch in good shape as is no warranty. ship only to United States
Up for auction is a Victor Welding Set Oxygen& Acetylene Gas Regulator Gauges Model SR-500 Very clean- lightly used- working* Because so many people with a zero(0) feedback rating bid on our auctions and then don't pay for the item after they win it. We are asking that if you have a zero(0) feedback rating- would you please email us for permission to bid beforehand- we would really appreciate it- it shows that you are serious about bidding and paying. Failure to ask for permission may result in us canceling your bid and blocking you from any further auctions or purchases from our store. Feel free to ask questions. But be sure to do so 24 hours before the end of the auction to ensure that we can respond to you. Thank you for your interest in our listing. View our eBay store for other great items! KOHNS BEST BUYS INFORMATION: Payment ... moreInformation: Payments accepted and preferred through PayPal How Long You Have to Pay after Auction Has Ended: We follow the ebay process. after 4 days an"unpaid item case" will be opened. And 4 days after that the case will be closed. At that point you will be unable to pay for the item and an unpaid item case will be recorded on your account. So, technically, you will have 8 days to pay for your item if you wait all the way up to the last minute. Sales made in Ohio: Sales made to Ohio customers are subject to a 6.5% sales tax. Sales picked up at our store are subject to 6.5% sales tax. International Payment Information: International sales where applicable must be paid using PAYPAL. CANCELLATION OF BIDS: We reserve the right to cancel any and all bids from bidders with little or no history of buying activity(feedback) A significant number of negative feedback or numerous bid retractions. Shipping Information: We ship primarily with Fed Ex Ground Service or USPS Priority Mail We will ship by alternate shippers if requested. Any item which is too heavy to box will be crated. Items where specified shipping may be included in the price of the item. We do not refu
This model torch is an automatic medium duty torch handle that features a unique gas control system with pilot light and automatic on/off. Eliminates relighting and flame readjustment. Saves time and improves safety. Buyer pays shipping/handling costs of $8. I accept Pay Pal from a confirmed address only– all payments must be received within 7 days of auction close. No sales outside of the US. Please e-mail with any questions.
Victor regulator- used in good working condition. Please email with any questions. Thank you 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13eb50a401a-0xf2-
ANTIQUE OXWELD OXY ACETYLENE TORCH BLOW PIPE a large cutting torch sold by the linde air products co. 29" long and a long heating torch 30" long both pieces are very old. The sooner you pay the sooner you get your stuff! Please leave feedback when you receive package this lets me know you received package. I ship on MONDAY and THURSDAY. I accept paypal. If this is a problem send me a message. All returns must be made within 14 days of receiving package. Only auction price will be returned. Foreign countries must pay by paypal within 3 days of auction end. Invoices will be sent next day so that any extra postage can be added. No free shipping outside of U.S.A.
USED Smith Welding Gauges HB1510A-540 OXY HB1520B-300 ACET*We Do Not Accept Returns. So Please Bid Accordingly(See Feedback) This Item Will Ship With Tracking* NO INTERNATIONAL SHIPPING. Unless Discussed Prior To The Sell*
USED Trimline Welding Gauges 8801 R-76 75-540 8704 R-76 15-510*We Do Not Accept Returns. So Please Bid Accordingly(See Feedback) This Item Will Ship With Tracking* NO INTERNATIONAL SHIPPING. Unless Discussed Prior To The Sell*
MOUNTED DISPLAY LOT WELDING TORCH. HEADS, TIPS, KEY AND ACCESSORIES NATIONAL VICTOR TOTAL WEIGHT WITH THE MOUNTED DISPLAY IS OVER 28 Lbs
USED Victor Cutting Torch Has Some Bumps& Bruises. But Still Works Fine ST900C USA*We Do Not Accept Returns. So Please Bid Accordingly(See Feedback) This Item Will Ship With Tracking* NO INTERNATIONAL SHIPPING. Unless Discussed Prior To The Sell*
YOU ARE BUYING A USED VICTOR CUTTING. WELDING TORCH WITH HOSE. INCLUDED IS A J100 HANDLE AND A CA1250 CUTTING/WELDING TORCH HEAD. COMES AS SEEN IN PHOTOS.GREAT DEAL.FREE SHIPPING! I STRIVE FOR FIVE STAR SERVICE IF YOU HAVE ANY QUESTIONS PLEASE CONTACT ME THROUGH EBAY MESSAGING I WILL TRY TO ANSWER ANY QUESTION YOU MAY HAVE. A surcharge may apply for shipping to Alaska. Hawaii, and Puerto Rico Please ask if this item will require additional shipping surcharge. THANK YOU
USED Harris Cutting Torch Automatic Cleveland. USA#18F 83*We Do Not Accept Returns. So Please Bid Accordingly(See Feedback) This Item Will Ship With Tracking* NO INTERNATIONAL SHIPPING. Unless Discussed Prior To The Sell*
We have here for sale. A used vintage Uniweld welding torch handle, that is model# 71 and serial# 053661. Measures 5 3/4" long overall. Please look at all of the pictures closely and make sure that you have a correct address for shipping listed with eBay/Paypal, as we will ship only to the address listed with eBay/Paypal. If you have questions about delivery, please contact your local United States Post Office. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13eb945afd3-0xfd-
Straight forward auction. Used Acetylene- BD Torch Tip A-3! Please refer to pictures before bidding! Lowest auction and no reserve! Good luck! MY GUARANTEE Never a reserve on my auction! FROM A SMOKE FREE AND PET FREE HOME! NEXT DAY SHIPPING PAYPAL VERIFIED! FREE TRACKING AND DELIVERY CONFIRMATION! 14 DAY MONEY BACK GUARANTEE PERSONAL SELLER. GREAT CUSTOMER SERVICE COMBINED SHIPPING DISCOUNT WITH ANY OTHER AUCTION BID WITH CONFIDENCE PLEASE EMAIL ME WITH ANY QUESTIONS OR CONCERNS YOU MAY HAVE BEFORE BIDDING! PLEASE CHECK OUT MY OTHER AUCTIONS! ALWAYS HAVE COOL STUFF FOR SALE!
Vintage Gas welding tip assortment. There are a total of 7 tips. Sizes range from fine to blow-torch. They are all in used condition. Some need new"O" rings& cleaning up. Buy-Now or make an Offer. Ships to U.S.A. Addresses Only!
We have here for sale. A vintage used acetylene air torch, that measures overall 14 3/4" with tip and brass hookup. The torch body is unmarked, however the tip has the following stamped into it: P.O.L. 6103, 6104. Please look at all of the pictures closely and make sure that you have a correct address for shipping listed with eBay/Paypal, as we will ship only to the address listed with eBay/Paypal. If you have questions about delivery, please contact your local United States Post Office.
Welding tip size 250 fits Oxweld W-17 welding handle. This is only tip& mixer NO HANDLE. In very good working condition. Equipment has been professionally cleaned and tested. It is guaranteed to be as described or can return within 14 days of sale. Buyer must pay return shipping. Items will be shipped UPS or USPS shipped within 1 business day of cleared payment. We only ship in the continental 48 US states. We can NOT provide international shipping.
NCG LXA cutting attachment and LX welding handle w/A hose fittings. Also. LXU-58 welding tip. All in very good working condition. Equipment has been professionally clean. Rebuilt and tested. It is guaranteed to be as described or can return within 14 days of sale. Buyer must pay return shipping. Items will be shipped UPS or USPS shipped within 1 business day of cleared payment. We only ship in the continental 48 US states. We can NOT provide international shipping.
Your bidding on a clean/ slightly used gas regulator. Regulator pressure goes to 30 p.s I the tank pressure gauge goes to 4000 PSI. I only ship to the contiguous 48 states. Posted with
FROM AN ESTATE AUCTION COMES THIS LARGE LOT OF BRASS WELDING TIPS. AND OTHER ACCESSORIES. PLEASE CHECK OUT THE PHOTOS TO SEE WHAT YOU WILL GET. FREE SHIPPING! PLEASE NOTE! I WILL BE ON VACATION TILL MAY 10TH, AND WILL NOT BE ABLE TO SHIP ANY ITEM BEFORE THAT TIME. THANKS!
THIS IS A NICE SCOTT 11 CGA-580 REGULATOR GOOD CONDITION# Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it ... moreis a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item4.
These three cutting torchs have been setting on the self for a while. They have been cleaned up. But not tested. Because they are used they are sold as is. 1 Victor CA-2461#2 Victor CA-1350#3 NCG SA-483.
Three Nozzles/Fittings for Compressed Air. Welding, Acetylene, CGA510, CGA 200, Milton, Chicago 22. These fittings are used and in good condition with normal wear. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*211fbc%3E-13ebbb9edc4-0xf4-
Craftsman Torch 499. Igniter, and Tap Wrench 9-5214, all items are used with normal wear and in good condition. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13ebbb9ed46-0xf1-
We have here for sale. A used cutting/brazing torch handle that has no makers mark and is 5 3/4" long. Nicks, scratches and dents throughout, however this resembles the Uniweld# 71. Please look at all of the pictures closely and make sure that you have a correct address for shipping listed with eBay/Paypal, as we will ship only to the address listed with eBay/Paypal. If you have questions about delivery, please contact your local United States Post Office. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13ebbb9ec97-0xfb-
Hi I'm in the process of weeding out my extra brazing and cutting pieces. First is an old war-time AIRCO torch. There is no badge on it and no stamping, But from what I've researched it is the early version of a 700 with A size connections. It has the early corn cob grip, And the tip that is included is a MODEL 90 NO 5. The interesting thing is their are female threads for the tips, So the tip nuts have male threads that are protected by the hand grip. It's a cool design as it keeps the threads from getting banged up. Way lighter than my Victor that is the same size. Great for brazing bike frames and sheetmetal welding. This is in way better condition than the pictures look but it is still definitely vintage equipment. The valves are tight but smooth. And hold pressure. It uses the smaller hose size. Also included are 2 replacement ... morepress-in valves both oxygen and acetylene sides. I figured I'd throw in some more random AIRCO stuff since this will be shipped in a flat rate box. There are 3 torch cutting tips- 00.0& 1 sizes for a larger cutting setup, And 4 tips that look like a Henrob or Smith style size 2. 3, 4& 5. A larger AIRCO press in acetylene side valve for the big torch, A rosebud style AIRCO tip style 719 no 8, And another AIRCO tip style 90 size 9. The little random tip is a SMITH'S A22. Everything looks to be in useable condition. Nothing is plugged up or dropped or corroded. Great stuff to complete your vintage oxy-acetylene sets. Only selling to clear out some tool box space! Check other auctions for more good stuff! Shipped USPS priority $15. Thanks!
Hi. Clearing out some of my extra oxy-acetylene parts. Up for consideration is a Victor J27 torch body. This is probably an old wartime aircraft torch, And this was rebuilt by the local welding supply store. I'm not sure if they send it out or do it in house. The body was beadblasted and everything is very clean. The valves/knobs turn very smoothly as they should, And they hold the pressure when off. The threads are basically perfect. The only bummer is someone used some type of pliers to remove the center, And there are a couple chew mark right below the valve body. Not too bad though. This is a really nice piece to add to your set. I really should keep this but I have a great J28 setup that works great although it is heavier and longer. That is why I'm keeping the tips and cutting attachment! Great for light duty sheetmetal welding ... moreand brazing for long periods of time-super light! Perfect for road bike frames and chopping up hot rods. Shipping $9. Thanks! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13ebc05ec21-0x104-
Hi Clearing out some of my extra oxy-acetylene torch pieces. Up for consideration is a war-time AIRCO 9100 torch with 2 STYLE 919 tips no 2& 3. This hasn't been used for a while now but should be in working condition. The knobs or valves turn freely with good resistance and hold pressure off. The tips are not plugged up and all the threads are in good shape. I added the cut hose nuts to keep the threads from getting banged up. This has some wear to the plating. This is perfect start to a great aircraft torch setup! Super light and great for brazing or sheetmetal welding for hours. Perfect for bicycle frames or chopping hot rods! Shipping $9 USPS priority. Thanks! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ebc05ec46-0x106-
YOU ARE BIDDING ON A HARRIS 70 DEGREE ANGLE CUTTING TORCH MODEL# 62-5. ALTHOUGH USED THE TORCH IS IN GOOD CONDITION, COMES WITH WHAT YOU SEE IN THE PICTURES, IT IS 48" LONG THERE ARE SIGNS OF USE NOTHING MAJOR WRONG WITH THOUGH A FEW DINGS ON HER PLEASE VIEW ALL PICTURES IN DESCRIPTION BEFORE BIDDING AS ALL ITEMS ARE SOLD AS IS. THERE ARE NO REFUNDS OR RETURNS. WHAT YOU SEE IN THE PICTURES IS THE ACTUAL ITEM(S) YOU WILL RECEIVE UPON WINNING THIS AUCTION(UNLESS STOCK PHOTO IS USED FOR DVDS AND GAMES) PAYMENT IS DO WITHIN 5 DAYS OF CLOSING DATE. I WILL ONLY SHIP WITHIN UNITED STATES. PLEASE ASK IF YOU HAVE ANY QUESTIONS. GOOD LUCK BIDDING!
out of an estate- each hose is 5/8" dia heavy duty- RMA 200lbs cap made in USA- also selling the torch head& gauges in other listings- just selling the hose in this listing- shipping figured by shipping wizzard to your zip code- DO NOT SELL OUT OF THE US- check my other auctions as sell coins. Collectibles, and antiques-
I BOUGHT THIS VICTOR MEDALIST HP FLOW METER AT AN ESTATE AUCTION. DON'T KNOW TO MUCH ABOUT IT. OTHER THAN IT'S A COMPRESSED GAS REGULATOR, SA568, GAS SERVICE, INERT GAS, MAX. REG. INLET, 3000 PSI. MODEL NUMBER HRF 1480-580. MADE IN USA, DENTON TEXAS. IN VERY GOOD SHAPE. WILL SHIP SMALL FLATE RATE BOX. NO INTERNATIONAL SHIPPING ON THIS ITEM. THANK YOU. BOX: 8 X 5 X 2@ 3 POUNDS PACKAGED.
For your consideration is a set of ProStar Equipment Co. Firepower. Oxy/Acetylene Cutting and Welding Torch. MADE IN THE USA! It is in great condition. I am retired and no longer need them. thanks for looking
Cutting/Welding Torch Oxweld type w-23 type w-17 Cutting/Welding Torch Oxweld type w-23 type w-17. ONLY WHAT IS PICTURED IS INCLUDED.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13ebc05ebaa-0xf5-
MOBILAIRE V OXYGEN PRODUCER 5 LITER PER MINUTE. WAS CHECK AND MANTENIMENT 2 MONTH AGO, WE HAVE THE WATER VASE AND THE LINE NO SHOW IN THE PICTURES, BECUASE IS A HEAVE EQUIPTMENT WE NEED MAKE A SHIPPING QUOTE, ANY INFORMATION OR PICTURE MGEXPRESSINC AT GMAIL EXELENT FOR WELDING GOLD AND MAKE GLASS WORK GABRIEL THIS OXYGEN PRODUCER GENERATE 5 LITER PER MINUTE AND COST NEW OVER 3000 DOLLARS ANY QUESTION MGEXPRESSINC AT GMAIL DOT COM
Victor WH270FC-V Torch Handle Brass 0382-0143 Acetylene. Oxygen Welding w/ Tip Items are used. But minimally. All parts are in good working condition. Check valves, knobs, inlets, and housing are all in good used condition. Built-in reverse flow check valves and flashback arrestors. Victor tube within a tube design, Three piece"Y" rear assembly with thread connection, 9/16" 18 hose connections, Stainless steel ball valves*Free shipping for continental domestic orders* Normal 0 false false false EN-US X-NONE X-NONE
Victor10-MFA Heating Nozzle. Multi-flame heating head for heat treating, straightening& priming. Size 10. In good condition with signs of use.
THIS IS A NICE SCOTT SPECIALTY GASSES 5118B350 18B CGA-350 REGULATOR NICE# Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours ... moreof purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item1.
This is an Oxyweld pipe beveling cutting torch. It is fantastic shape and all controls turn and work freely. Good luck and thanks for looking
Hi and welcome to my auction. Please take a look at my other auctions for a couple Victor Cutting/Demo Torches an Oxweld Blowpipe other welding tips. Mixing handles and more. Save on combined Shipping! All my equipment has been in a shed for a very long time. All I did was wipe off some of the dirt and cobwebs so I could read the names and numbers. It is all used and has varying degrees of normal wear. Scuffs, scrapes and dings. Some are worse than others. I am separating out what I consider the scrap metal pieces only and will sell them separately. Since I do not have tanks I can’t say with certainty if any of this equipment works or not. This auction is for 5 scrap welding tips. I consider these as scrap tips because one or two. Maybe more, of the holes in them are smashed closed but maybe you can do something with them to make them work ... morefor you? Purox 4 Victor(no number readable) Victor 3-1-101 Victor 6-1-101 Victor 2-1-101 Delivery confirmation(in the USA) is included in the cost of shipping these SCRAP Welding Tips to you. Thanks for looking and Happy Bidding! If you win more than one item from me please do not pay the first invoices you receive. I will contact you through eBay when I send you a combined invoice. Payment Is To Be Made Within 3 Days of Auction End International Bidders To Use PayPal Only! Powered by The free listing tool. List your items fast and easy and manage your active items.
FOR SALE IS A WELDING CART.GAUGES,BUREN, CUTTER AND HOSES,SEE PICTURE.THIS EQUIPMENT IS IN VERY GOOD WORKING CONDITION.
Price is for 1 regulator. 4 are available.
Victor 0781-5105 EDGE ESS3-15-510 Acetylene Regulator High-strength Zinc-Aluminum alloy housing cap Forged brass body Stem type seat mechanism 2.0" diaphragm– fabric reinforced neoprene External self reseating relief valve. Not designed to protect downstream equipment(no relief valve is needed on low pressure fuel gas models) Sintered inlet filter– bronze User friendly Advanced design- durable and compact Outstanding flow performance Unsurpassed safety Color-Coded knobs for gas type Retails $160 +/ Victor ESS3-125-540 Edge Regulator- Oxygen- 0781-5100 High-strength Zinc-Aluminum alloy housing cap Forged brass body Stem type seat mechanism 2.0" diaphragm- fabric reinforced neoprene External self reseating relief valve.Not designed to protect downstream equipment(no relief valve is needed on low pressure fuel gas models) Sintered ... moreinlet filter– bronze User friendly Advanced design- durable and compact Outstanding flow performance Unsurpassed safety Color-Coded knobs for gas type Retails $160.00 +/ Victor 315FC Heavy Duty Handle Built-In Flashback Arrestors- no need for accessory flash arrestors. Built-in Reverse Flow Check Valves- no need for accessory check valves. Works with all fuel gases. There are pressure restrictions for different gases. Torch Handles are offered in H315FC Extra Heavy Duty and Heavy-Duty(315FC) models. And available in Victor®s most popular outfit models. Torch Handles also feature Victor® Traditional threaded assemblies for economical repair if service is necessary. All Victor® torch handles with"B" size fittings are equipped with built-in reverse flow check valves and with built-in flashback arrestors. The shape of the torch handle is a registered trademark of Victor®, Retails $170.00 ESAB CA2460 Style Cutting Attachment. 90 Degree Head- QCA2460 Retails $86.00 Total Retail $576.00 Conservative Buy the Lot for $260.00 Today. Now folks that's over 50% of a conservative retail! Torch is in Excellent Condition if not Minty. The 2 guages are in great c
Victor Welding Tools Everything shown in pictures is included AS IS! I do not know about welding. So these tools are being sold as is as seen in the pictures. I am listing what is written on them, and the condition they look like to me, so please ask any questions before bidding. Victor 100C marked S- 104141 Victor 4 type-1 tip Victor 2-T1 tip Uniweld Type 17 Number 2 tip seems to be bent Uniweld Type 17 Number 3 tip Allin Liquid Eye unsure of the size Bernzomatic torch(it just says bernzomatic and has a knob on it for adjusting the flame) 2 small tips no markings(one has the number 8 but that is it) 1 connector? I really don't know what the other piece is. About the same size as the small tips, but doesn't look like a tip, see the pictures) 1 Cut off Torch marked Model 1100 CGA E-5 Two Shurlite Gas lighter containers one contains ... more5 renewals for the Shurlite Gas Lighter and the other contains a lot of small pieces that look like watch pieces to me but I will include it in case they have something to do with welding.please see the picture. 1 Replacement Cutter Wheel for Craftsman Tubing Cutter see picture
Estate find good working Dockson model 5 torch with C5 cutting head made in USA not sure of age I package every item as safety as possible but some things happen so It is up to the BUYER to ask for shipping insurance on your package that will paid by the BUYER. Also it is your obligation to make sure the package is being sent to the right address. If your E Bay and Pay Pal addresses are different I will ship item to the Pay Pal address. I will be glad to answer any questions BEFORE end of auction, Also if you do not see it in the picture PLEASE do not assume it is in the auction and all items are in found condition I do not touch up any items. I will do my best to ship all item on day of clear Payment, Payment must be received within 4 days, Due the large amount of unpaid claim An Automatic Unpaid Claim will Be Opened to Non-paying after ... more4 Days, If you Cannot make payment within 4 days please contact me ASAP. Please communicate with me. I do my best to accurately describe my items; and more pictures are always available on request, I have multiple pictures of all my auction for my review and yours and all my Item's are on other web sites so I reserve the right to remove any item that does not have a BID at any time, however, should I miss something or the item just is not what you expected Please contact me before you leave Feedback. Thank you for your understanding. Please view picture or ask any questions prior to bidding
This is a lot of Victor cutting and welding torches and parts. All are original Victor except for 1 rosebud torch and 3 cutting tips. These are noted on the list. The o-rings are all good except for the large rosebud torch. Everything else is complete and in good condition. Free shipping.
TESCOM CORP. 0-200PSIG 3/8"NPT 1/2"NPT FLOW METER ASSEMBLY H1251B Search TESCOM CORP. FLOW METER ASSEMBLY USED CONDITION. ITEM HAS SLIGHT SCRATCHES AS SHOWN IN PHOTO H1251B 0-200PSI. 3/8"NPT, 1/2"NPT PORT SIZE ALL MEASUREMENTS ARE APPROX ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION GUARANTEED NOT DOA 105 SW3 KM 5.16.13 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. ... moreIf there is a significant increase in shipping your order will be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation
This is a used Dayton Acetylene Regulator Model 25261. It was working fine when last used many years ago. It has bee forgotten about in my shop until recent cleaning uncovered it. time to find a new home.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*60c23f%60%3E-13ebd62f20a-0xfd-
This is a used Marquette Model# RD regulator but was working well last time it was used. One glass lens is missing on the tank pressure gauge. But still works fine, it has been stored and forgotten about in my shop for many years. time for it to find a new home
Up for sale is an Airco professional heavy duty cutting torch model 822-9706 Used but not enough to wear the sticker off it 21" loong.These Airco torches were the best reliable torches ever made.Just ask someone who uses one.I'm retiring so someone is going to own a nice tool.Buy with confidence! I ship fast! Thank you for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13ebd62f30b-0xff-
I have three Oxweld Torch Heads. W-17&22#40. W-17&22#30. W-17&22#4. All are in used condition but still work just fine.
Heavy Duty Regulators. SR-400D has plactic covers for guages. SR-410A has glass guage vocers with several chips around the edges. These have not been used in several years, but worked when last used. T0o allow buyer to review product, offering refund of bid price within 14 days of receipt if found to be defective.
You are bidding on a vintage Prest-o-lite type 401 torch. Excellent condition! Lucky winner pays actual shipping to USA only. Thanks for looking and good luck!
Smith's Acetylene Torch Tip Head AW206 Welding Brazing Heating This is a used Smith's AW206 Torch Tip used for acetylene welding. Brazing or heating. It is in good condition with normal wear from some usage. The threads are in good condition. It is 7 inches long. It fits a Versa-Torch handle. Please see pictures for more details. Notes on Shipping: Shipping will occur within 0-1 business day of cleared payment. Shipping will be of your choice via Calculated Shipping. Combined Shipping is ALWAYS available. Unless the items cannot be packaged together securely. Please contact us to indicate that you wish to have combined shipping-and be sure to message us when you are finished bidding so that we can then send you the updated invoice reflecting the combined shipping charges. Notes on Payment: Please pay within 5 days. PayPal only. Other ... moreNotes: Smoke-free home. Please contact us for other specifics. Pictures, or questions, which we will do our best to answer. We always want our customers to be pleased with their purchase(s) so we accept returns up to 30 days; just send us a message and we can work it out. gsrx_vers_486(GS 6.5.1(486) 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ebd62f323-0x104-
Smith's Acetylene Torch Tip Head AT605 Welding Brazing Heating This heavy-duty acetylene/hydrogen multi-orifice heating tip is especially suitable for high temperatures. Designed for heavier casting applications when using the Smith Versa-Torch™ system. It measures 10 inches long. Please see pictures for more details. Notes on Shipping: Shipping will occur within 0-1 business day of cleared payment. Shipping will be of your choice via Calculated Shipping. Combined Shipping is ALWAYS available. Unless the items cannot be packaged together securely. Please contact us to indicate that you wish to have combined shipping-and be sure to message us when you are finished bidding so that we can then send you the updated invoice reflecting the combined shipping charges. Notes on Payment: Please pay within 5 days. PayPal only. Other Notes: Smoke-free ... morehome. Please contact us for other specifics. Pictures, or questions, which we will do our best to answer. We always want our customers to be pleased with their purchase(s) so we accept returns up to 30 days; just send us a message and we can work it out. gsrx_vers_486(GS 6.5.1(486)
Smith's Acetylene Torch Tip Head AW101 Welding Brazing Heating This is a used Smith's AW101 Torch Tip used for acetylene welding. Brazing or heating. It is in good condition with normal wear from some usage. The threads are in good condition. It is 5.5 inches long. It fits a Versa-Torch handle. Please see the pictures for more details. Notes on Shipping: Shipping will occur within 0-1 business day of cleared payment. Shipping will be of your choice via Calculated Shipping. Combined Shipping is ALWAYS available. Unless the items cannot be packaged together securely. Please contact us to indicate that you wish to have combined shipping-and be sure to message us when you are finished bidding so that we can then send you the updated invoice reflecting the combined shipping charges. Notes on Payment: Please pay within 5 days. PayPal only. ... moreOther Notes: Smoke-free home. Please contact us for other specifics. Pictures, or questions, which we will do our best to answer. We always want our customers to be pleased with their purchase(s) so we accept returns up to 30 days; just send us a message and we can work it out. gsrx_vers_486(GS 6.5.1(486)
This is for a used set-20 cu ft Oxygen Tank and 10 cu ft Acetylene Tank. They are portable and make them very easy to use on site. They are in nice shape and can be filled or exchanged at local gas supplier. This item is for the lower 48 states only. I will ship within 24 hours or less after cleared payment. As long as the post office is open. Payment is due within 7 days of the end of the auction. Please ask any and all questions that you have before you bid.
GENUINE VICTOR CA 1350 CUTTING TORCH& VICTOR 100 HANDLE MIXER TIP VM-W-0.IN GOOD CONDITION ALL KNOBS TURN SMOOTH,THREADS OK,SEALS OK,REGULAR O-RINGS,MEDIUM DUTY SET,REMOVE LEVER FOR SHIPPING,QUESTIONS WELCOME,THANKS.
Brass gage sr450 d. Plastic covers. Untested selling as is Posted with
PREST-O-LITE AIR ACETYLENE SOFT FLAME TORCH TIPS# 1.1,3,5,GOSS BP 15,ALL IN NICE CONDITION,QUESTIONS WELCOME,THANKS.
GENUINE VICTOR CUTTING TORCH TIP 2-1-101 GENUINE VICTOR CA 2460 CUTTING TORCH ATTACHMENT IN GOOD CONDITION.NEW VALVE SEAT SEAL AND NUT,O-RINGS AND THREADS OK. GENUINE VICTOR 315C HANDLE MIXER TORCH.SMOOTH VALVE KNOBS,THREADS OK, GENUINE VICTOR TYPE-4# 1 TORCH TIP. HEAVY DUTY TORCH SET.QUESTIONS WELCOME,THANKS. 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13ebd62f24d-0xf8-
Picked this up from the welder at work. According to him the only thing wrong is its missing a knob(in photo) I can't not confirm this or test this torch. So I'm selling it for parts. It may be a perfectly working unit for all I know. I don't know too much about welding equipment and I could confirm the brand of this unit. I added a photo of the name plate. I believe it's a GENTECH 141C attachment and torch handle. Posted with o`7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B6mwimiu%3Eo%607-13ebf311964-0xf5-
This is a welding brazing oxygen acetylene set of different components. It has a Victor 100 Model mixer with 3 welding/brazing tips. Numbers 0, 2 and 4. It has a Smith mixer number 1, with an AC309 cutting tip. Also 4 different welding/brazing tips numbers A5, A7,A2 and a heating tip. The oxygen gauge is a Harris model 25-200. The acetylene gauge is a Victor model SR460-A. Also included is 10 foot of hose, some starting/ cleaning equipment, and an adapter for one of the gauges. Everything is used so I would put in new O-rings before use as it has been sitting for a few years. Shipping is $14.50 USPS Priority Mail to any continental USA destination. Have Fun!
Victor 10-MFA Heating Nozzle. Multi-flame heating head for heat treating, straightening& priming. Size 10. In good condition with signs of use.
Welcome to my listing I am looking for a new home for 1- STUBBY helium tank 219 cubic ft fills about 500 9" latex balloons helium tank was purchased in late summer 2005 used for a few jobs and has been stored since 2006 tank needs to be serviced paint job is ok has some chips and scratches and some writting on it Winner of auction will recieved 1 of my very own HAPPY FACE helium tank slip covers and safety wall mount Please bid If interested all proceeds are going for a well needed vacation after 10 yrs=) ALL SALES FINAL Please contact your local AIR GAS COMPANY for info regard customer owned tanks thank you