|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States This units are capable of performing MIG (can weld aluminum) STICK and LIFT TIG. ( NOTE: The lift tig can't weld aluminum) -MIG/MAG/FLUX Welding, can ... moretake up to 035" MIG solid wire(Gas MIG). 035" MIG FLux wire (Gasless MIG), 035”/.045” aluminum wire.
Buy It Now
$33.00 Shipping Condition: New Location: Ontario, United States ①Welding functions: Support for MIG gas, MIG mix, Flux cored/MIG gasless, Lift TIG, MMA. ②Clear display: The new digital LED panel display shows every ... moredetail of the weld clearly. ③Easy adjustment: easy switching of welding modes and adjustment of welding parameters. ④Automatic wire feed function: quickly feeds the wire out of the gun, even to inaccessible interiors. ⑤Inductance adjustment: adjusts the softness of the arc, reduces spatter/deepens the fusion pool. ⑥Multiple upgrade functions: 2T/4T welding mode, inductance adjustment, voltage adjustment.
Buy It Now
Free Shipping Condition: New Location: Chino, United States MIG，MMA，CUT and gasless self-shielded welding are available for the machine. Max Severance Thickness: 15/32"(12mm)@220V@40A, 5/16"(8mm)@220V@30A. Synergic ... moreMIG (60-250Amp). Work with a WP-17V TIG torch and easy to initiate arc ignition.Note:not include tig torch.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States HITBOX 200A 110V 220V MIG Welder Digital IGBT Semi-Automatic MIG Welding Machine with MIG Gas/Gasless Lift TIG ACR Welder，Programming Welding, Welding ... moreAluminum, Quiet, 2 Years Warranty. 【200A Super Current】 Support super current, super welding.
Buy It Now
Free Shipping Condition: New Location: Chicago, United States This Tooliom TL-LBT-150 Spool Gun is the perfect addition to your welding equipment. The gun boasts a 150A power and is designed to work with the Tooliom ... moreTL-250M Aluminum MIG Welder. It comes with a 10FT cable for added flexibility and ease of use.
Buy It Now
Free Shipping Condition: New Location: Chino, United States HITBOX 110/220V 200AMP Stick Welder Arc MMA Welding Machine Dual Volt 60% Duty Cycle Portable IGBT Inverter Welder. 10-200A welding range HITBOX stick ... morewelder is easy to strike an arc with little spatter, stable current, and good performance.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States This machine does not have a built-in gas solenoid, so a one piece gas valve TIG Torch is required.Set the welding mode button on "LIFT TIG" and set the ... moreamperage (15-125A)with the knob. Stick welding.
Buy It Now
Free Shipping Condition: New Location: United States MPN: HIZONE. Manufacturer: HIZONE. Part Number: HIZONE. 3 in 1 welderThis mig welding machine combines 3 different welding processes: Flux-cored Gasless ... moreMIG, MMA, and Lift TIG (Lift TIG welding gun not included).
Buy It Now
Free Shipping Condition: New Location: Chino, United States Feature: ①Made of high-quality metal, strong and durable ②The wire feeding speed is fast and efficient ③Small size, no space, easy to carry Parameter: ... morePower: 25W Voltage: 24V Current: 2A Size: 210*150*140mm Weight: 0.85KG Wire feeding speed: 2-18m/min Wire diameter: Φ0.6~Φ10mm Wire feed shaft size (OD*ID*H): 30*10*10mm Applicable card slot: V/K Packing size: 270 * 270 * 170mm Package weight: 1.38KG Packing list: 1*Wire feeder.
Buy It Now
$7.99 Shipping Condition: New Location: Enfield, United States XL GLOVES.
Buy It Now
Free Shipping Condition: New Location: Whippany, United States Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current, the pretty nice beads, specially when ... morein small welding current. DIGITAL IGBT INVERTER TECHNOLOGY.
Buy It Now
Free Shipping Condition: New Location: Perrysburg, United States The Lincoln Electric Wire Feed Welder Spindle Adaptor can handle up to 12-1/2 lbs. spools of wire. It is compatible with Lincoln Electric wire feed welders. ... morePVC and plastic construction for lightweight durability.
Buy It Now
Free Shipping Condition: New Location: United States The easy to use welding machine uses IGBT soft switch technology, has excellent arc stability at 110V, and has a variable current of 10-225 A. ★ More ... morepoint: - Works directly from standard US mains plug.
Buy It Now
Free Shipping Condition: New Location: Chino, United States HZXVOGEN MIG145 MIG Welder Semi-automatic Non Gas Welding Machine with 1KG Flux Core. 1 MIG145 Welding Machine. Compatible With Flux Core,Spot Welding ... moreQuickly.And It Can Atomatically Feed Wire Without Filling When Pressed MIG Torch Button.
Buy It Now
Free Shipping Condition: New Location: Perris, United States Scientific and reasonable cooling design ensures the safe use of the machine. [Premium Quality] This dent puller machine with stainless steel shell, high ... morequality and durable.
Buy It Now
Free Shipping Condition: New Location: Chino, United States ①Brand:HITBOX ②Model:AT2000 ③Input Power Voltage(VAC): 110V/220V ④Rated Input Capacity(KVA): 5.8 ⑤Rated Input Current(A): 52A 110V; 26A 220V ⑥Output Current ... moreRange(A): 20-200A ⑦Duty Cycle: 60% ⑧No-load Voltage(V): 64±3% ⑨Insulation Class: F ⑩Protection Class: IP23 ⑪Electrode Diameter (mm): 1.6-3.2 ⑫Package weight: 3.75KG (8.26LB) ⑬Package size: 32*15*29cm(12.59*5.90*11.41in).
Buy It Now
$35.00 Shipping Condition: New Location: New Bern, United States New unit, still in the plastic bag. Can be hooked up to a military slave connector or a pair of car batteries, making these very popular "in the field". ... moreExactly as pictured! To avoid confusion, we make every attempt to show the item as it currently is.
Buy It Now
Free Shipping Condition: New Location: Chino, United States ①Multipurpose welder with quality accessories 110V 220V 180Amp with Gas MIG/Gasless MIG/Lift TIG/ARC multi function 110V 220V DC inverter welder. ② Both ... moregass & gassless available HITBOX MT2000II can use 0.8mm/ 1.0mm 1kg solid wire and flux cored wire. solid wire for gas welding, flux cored wire for gales welding. the effect of 0.8mm wire will be better than 1.0mm. it can weld iron, carbon steel, stainless steel. ③ Portable and light weight HITBOX MT2000II have 4.8kg, this welder features a easy carrying handle, compact design, easy for translation and storage. very convenient, can be used anywhere you need. ④ Great protection, longer lasting This welder has a rated duty cycle of 60% and thermal overload protection. with these features, this welder will protect you and your welder.
Buy It Now
Free Shipping Condition: New Location: Chino, United States HITBOX 250A Aluminum MIG Welder 110V/220V Dual Vol MIG/Lift TIG/Stick 4 in 1 Welding Machine Synergic setting: The wire feed speed and current will be ... moreauto fitted by input voltage. Manual setting: The wire feed speed and current can adjust by welding data. Digital Screen:The voltage and current are displayed in the panel Can be used with MIG gun with graphite wire feed tube for aluminum function Up to 250 A output that allows to weld mild steel up to 9/32 in plate. Certificated by ETL: Intelligent protection includes over-voltage, over-current, over-heat protection. 2T/4T Operation (2 steps or 4 steps of welding) and inductance(soft to hard on arc sparking)Compatible with WP-17V 35-50 (not included inside product) Non noise: built with thermal original chip.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States And the auto wire feed function will make job more efficiently. There is a free mask included to protect you face and eyes. As the power cord and plus ... moreare UL certified, you may rest assured about the electricity safety in work.
Buy It Now
Free Shipping Condition: New Location: Brooksville, United States The Lincoln Electric 90i FC Flux Core Wire Feed Weld-PAK Welder is a wire feed welder designed for flux core welding process. It operates on 120V power ... moresupply and is suitable for business and industrial use. The welder is compact and portable, making it easy to move around. It is a new product from Lincoln Electric and comes with a Flux-Cored Welder style.
Buy It Now
Free Shipping Condition: New Location: Seattle, United States 1 x Welder Operation manual. The Welder Is The Love Of My Life,I Would Like To Spend The Rest Of My Life With It. Smooth and Stable Arcs: Auto Adaptive ... moreArc Force minimizes electrode sticking without compromising arc stability or increasing spatter.
Buy It Now
$67.44 Shipping Condition: Used Location: Leola, United States Bought from pawn shop never used like new
Buy It Now
Free Shipping Condition: New Location: New York, United States 1 x Welder Operation Manual. 👨🏭User-Friendly : Whether you're a beginner or a pro, our arc welding machine handles AWS E6013 E7018 E7014 E6011 rods ... morefrom 1/16"-1/8" (1.6mm-3.2mm) with ease. Perfect for DIY projects and professionals alike.
Buy It Now
Free Shipping Condition: New Location: United States Color: MINI130. It can weld 10 electrodes in a row without protection, with a high-duty cycle. Size: 130A. Item Form: Welder. Quick Start & Safety First: ... moreThe stick welder has a built-in hot start function for quick arc starting and is constructed with Over-heating protection, Over-current protection and over-loading protection.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Welding Machine Portable Welder Machine 110V Welder Machine Kit Description The handheld welding machine is made of high-quality plastic, which is strong ... moreand durable. It adopts an IGBT inverter technology to achieve excellent welding effects and can adjust the output current (20-120A) by turning the top compass to allow for convenient use. It's your ideal choice! Key Features Strong and Durable: This product is made of high-quality plastic, which is wear-resistant, corrosion-resistant, heat-resistant, strong, durable, and not easy to deform. Efficient&Energy-saving: It has a maximum power of 4600W to achieve fast welding, saving you lots of time. In addition, it has a high efficiency of about 85%, saving you lots of electricity. IGBT Inverter Technology: The unique contro.
Buy It Now
$12.45 Shipping Condition: New Location: Lancaster, United States Welder Cover Marine Vinyl Esab Rebel Model EMP215ic New. Condition is New. Made from marine vinyl. Mildew resistant front and back, Cold crack resistant ... moreto -22°F.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Wire Feed Assembly MIG MAG Welding Machine Welder MIG Wire Feeder Motor New. 1 Wire feeder. Wire feed shaft size (OD ID H): 30 10 10mm. 2️⃣The wire feeding ... morespeed is fast and efficient. Wire feeding speed: 2-18m/min.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States The EMP 210 is easily the most quality, cost efficient 200 amp multi-process welder on the market. The EMP 210 is also field capable using a 10kW generator. ... moreThis welder is DC TIG only, so you can not TIG weld aluminum.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Hitbox MIG 120 welder has adjustable wire feed speed and power settings, you can adjust it to suit your application. Its arc is smooth that bring you ... morea decent job. This function will keep you and your welder safe.
Buy It Now
Free Shipping Condition: New Location: Walton, United States IGBT Technology. Stick Welder 205A pro. 220V to 110V Adapter (AC power source only). More stable arc, Ideal performance for welding thin workpieces. With ... morea simple 110/220V adapter, it could be plugged dedicated 220V outlet for more power.
Buy It Now
Free Shipping Condition: New Location: Chino, United States AIXZ 200A TIG Welder AC DC/Stick/Pulse TIG 4 IN 1 Welding Machine 110V/220V. ✅【HIGH-QUALITY WELDER】The tig welder adopts advanced technology and high-quality ... moreelectronic parts, which help improve welding efficiency.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Support MIG GAS, MIG WITHOUT GAS LIFT TIG, MMA. This welder can weld aluminum, iron, carbon steel, stainless steel, etc. This welder features a easy carrying ... morehandle, compact design, easy for transportation and storage.
Buy It Now
Free Shipping Condition: New Location: China Why Choose VEVOR?. Multifunction 3-in-1 MIG/TIG/MMA professional combo welder, capable of welding up to alloy, mild steel, weld steel, stainless steel, ... morecopper, and cast iron. It can work well with MMA MIG TIG function to weld steel and stainless steel perfectly.
Buy It Now
Free Shipping Condition: New Location: Denver, United States 【Advanced IGBT Inverter Technology】- The welder machine 110v adopted with the advanced IGBT inverter technology, which can adjust the output current in ... moremicroseconds. 1 x 160A MMA Welder. The output current is stable and the power is low, which can effectively save the use of electricity.
Buy It Now
Free Shipping Condition: New Location: Secaucus, United States The ARC200 features advanced IGBT inverter technology, which ensures stable and consistent welding performance, even at high amperage outputs. It has ... morea weight of2.6kg, making it lightweight and portable, and its compact design allows for easy storage and transportation.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China The best choice for beginners or professional welder. Stick welding process can handle E6013 electrode. To ensure Max safety during operation, mig welder ... moreis equipped with VRD, over-current overload and overheating protection system.
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States The EM 210 is undoubtedly the most quality, cost efficient 200 amp MIG welder on the market. The EM 210 is also field capable using a 10kW generator. ... moreEM 210 Power Source (MIG Only ). MIG Duty Cycle: 115V - 40% @ 90A | 230V - 15% @ 200A.
Buy It Now
$23.90 Shipping Condition: New Location: Monroe Township, United States HITBOX MIG250II MIG Welder 4 ways weld effect 【Synergy All in One】 : Support MIG GAS, MIG WITHOUT GAS LIFT TIG, MMA. MIG: 15-200A; MMA: 40-170A; TIG lifting: ... more30-250A. 【WELD ALUMINUM】 :This welder can weld aluminum, iron, carbon steel, stainless steel, etc.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States HITBOX 2IN1 MIG WELDER MMA DC 200Amp GASLESS IGBT 110V INVERTER MIG WELDER. Inverter technology: IGBT. Inverter mig welder 110V, machine carries MIG/ARC ... morefunction in one. MIG welding: 0.5~6mm iron and mild steel plate.
Buy It Now
Free Shipping Condition: New Location: Garland, United States 1 x MIG-140 Welder Machine. · GAS/FLUX----Flux. 1 x Grounding clamp. · Max Working wire----1kgs flux core. ⑤The effiency of this welder could reach more ... morethan 85%. WELDING MACHINE. 1 x Welding Mask. · Max Working current (A)----140.
Buy It Now
Free Shipping Condition: New Location: Fontana, United States Adopts IGBT module technology, energy-saving and stable heat dissipation. Besides, there are almost all necessary accessories included in this kit for ... moreconvenient operation. Don't hesitate to buy it!
Buy It Now
Free Shipping Condition: New Location: Whippany, United States ADVANCED IGBT TECHNOLOGY. This flux core welder will keep you and your welder safe. There are fans helping to cooling the welder when working. Welder ... morewith a easy carrying handle, compact design, light weight, easy for carrying and storage, can be used anywhere you need.
Buy It Now
Free Shipping Condition: New Location: Melbourne, United States 【 - 】：GZ GUOZHI 2 in 1 MIG Welder machine, included Digital FLUX MIG/Stick functions. Item model number: MIG 130. GZ GUOZHI MIG-130LED Welder is a for ... morefather, Husband, boyfriend and DIYers. It is easy for both beginners and professional welders to operate it.
Buy It Now
Free Shipping Condition: New Location: Walton, United States Mig Gun；110V/220V Adapter. IGBT INVERTER TECHNOLOGY. Earth clamp 2. Electrode holder.
Buy It Now
Free Shipping Condition: New Location: Chino, United States ①DUAL VOLTAGE MULTIFUNCTIONAL WELDER ②MIG FUNCTION ③LIFT TIG FUNCTION ④MMA FUNCTION ⑤2 YEAR WARRANTY AND GREAT AFTER SELL SERVICE.
Buy It Now
Free Shipping Condition: New Location: Santa Fe Springs, United States 24V Wire Feeder Motor Wire Feed Assembly for Harbor Freight Chicago Electric MIG Welder. About KOOBEN.
Buy It Now
Free Shipping Condition: New Location: Hacienda Heights, United States Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current, the pretty nice beads, specially when ... morein small welding current. DIGITAL IGBT INVERTER TECHNOLOGY.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Multi-Process： Gasless MIG/Stick 2 -in-1 Welder.ARC mode fits rods: E7018, E6013, E6011. - Portable Flux Core Wire Gasless Automatic Wire Feeding Welder. ... more- 110V AC Wire Feed Welder MIG Welder 200A Portable Welding Machine.
Buy It Now
Free Shipping Condition: New Location: Chino, United States ①Multipurpose welder with quality accessories 110V 220V 180Amp with Gas MIG/Gasless MIG/Lift TIG/ARC multi function 110V 220V DC inverter welder. ② Both ... moregass & gassless available HITBOX MT2000II can use 0.8mm/ 1.0mm 1kg solid wire and flux cored wire. solid wire for gas welding, flux cored wire for gales welding. the effect of 0.8mm wire will be better than 1.0mm. it can weld iron, carbon steel, stainless steel. ③ Portable and light weight HITBOX MT2000II have 4.8kg, this welder features a easy carrying handle, compact design, easy for translation and storage. very convenient, can be used anywhere you need. ④ Great protection, longer lasting This welder has a rated duty cycle of 60% and thermal overload protection. with these features, this welder will protect you and your welder.
Buy It Now
Free Shipping Condition: New Location: Hacienda Heights, United States Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current, the pretty nice beads, specially when ... morein small welding current. DIGITAL IGBT INVERTER TECHNOLOGY.
Buy It Now
Free Shipping Condition: New Location: Hacienda Heights, United States Powerful Arc-force provide smoother welding and deeper penetration, keep arc stability, consitant welding current, the pretty nice beads, specially when ... morein small welding current. DIGITAL IGBT INVERTER TECHNOLOGY.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Compatible With Flux Core,Spot Welding Quickly.And It Can Atomatically Feed Wire Without Filling When Pressed MIG Torch Button. 1X Mig Torch. 1X MIG145MIG ... moreWelder. - Welding thickness: 0.8-4mm. 1X Welding wire.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Please note: when use mig function, please connect the earth clamp to the positive pole"+" Inverter mig welder 110V, machine carries MIG/ARC function ... morein one. MIG(Synergic)mode: no gas iron welding,using 0.8mm flux cored wire to weld 0.8-3.0mm thickness metal,duty cycle:50%. ARC mode: using 1.0-2.5mm rods to weld 1.0-5.0mm metal. MIG/ARC Weldable metal：Iron, stainless steel, galvanized sheet, carbon steel（Cannot welding aluminum）.
Buy It Now
$4.99 Shipping Condition: New Location: Elk Grove Village, United States
Buy It Now
Free Shipping Condition: New Location: Walton, United States Unique IGBT soft switching technology provides excellent arc stability. YESWELDER Stick Welder. Auto Adaptive Arc Force： minimizes electrode sticking ... morein the puddle without compromising arc stability or increased spatter.
Buy It Now
Free Shipping Condition: New Location: Pasadena, United States It is small in size and easy to operate. Novices can easily learn to weld. IGBT Module Technology. Compact and Lightweight Design. 1 X MIG-Welder Machine. ... moreSupport for TIG/MMA/MIG Mode. Add To Favorites.
Buy It Now
Free Shipping Condition: New Location: Santa Fe Springs, United States
Buy It Now
Free Shipping Condition: New Location: New York, United States ARCCAPTAIN Stick Welder, 200A ARC/lift TIG Welding Machine with Synergic, IGBT Inverter 110V/220V Digital LED Display Portable MMA Welder Machine with ... moreHot Start, Arc force and Anti-Stick. It features adjustable hot start and arc force, easy to strike an arc, provide smoother welding and lower the probability of arc breaking; Automatic anti-stick avoids electrode sticking in the puddle.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Inverter technology: IGBT. Inverter mig welder 110V, machine carries MIG/ARC function in one. MIG welding: 0.5~6mm iron and mild steel plate. 1x Mig Welder. ... more1x Mig Torch. ARC welding: 2.5mm acid electrode like J422 E4303 6013.
|
|
|
|
Miller Maxstar 200 DX 125 Volt TIG Stick Welder 903701-01-1 Fabrication MIG
Up for your consideration is a Miller Maxstar 200 DX 125 volt TIG/Stick welder. Catalog#903701-01-1, Serial#LE 370539. It functions as it should.and has scratches. It can work on 110, 220, 208, 480, and 460 volt(single or three phase) Included are: tig torch, stinger, ground, gauges, and hoses. There is no foot pedal, and the connector on the tig torch will need to be changed if you just want to plug it in like the stinger and ground leads. The tig torch is included, but not pictured. The foot pedals are easy to find. They also make a remote that you can connect to your tig torch and you run it with your thumb. I have one on mine and I love it. These are excellent machines and you can google it to find out what exactly they can do. Also the little plastic panel door has a broken hinge pin(not an issue when closed) and there are various scratches. ... morePlease ask any questions you might have. Make sure to look at the other welders that I currently have listed. I mainly use Fed Ex even though the calculator shows it as UPS. The price will remain the same. I get far better service from them than UPS.
|
|
|
Hobart commercial 3 Phase Welder (Near Kingston NH)
300 Amps Volts 32 Max OCV 54. Duty cycle 100% Volts: 208/230/460 Amps: 44/40/20 Phase 3 HZ60 Specs 6589-1 Model: RC-301 Serial# 83Wxxxxxx With Spool gun.
|
|
|
Sealomatic RF sealer / RF welder / heat sealer
This is a used RF sealer(also called RF welder or heat sealer) in good condition Model number: 1000 FS40 10Kw 220 volts/3 phase/60 amp Platen size 24x16 Used. Very good condition Email for more info IMPORTANT SHIPPING INFORMATION: Buyer is responsible for shipping Buyer can come to location to pick up machine or arrange for a truck to pick it up Will load onto truck Email seller or LNMVACS@aol.com for more information
|
|
|
Lincoln Idealarc SP-250 Welder + Wire Feeder
Manufacturer: Lincoln Model: Idealarc SP-250 Welder Wire Feeder and Gun Included! Serial: AC846445 Condition: This item is in need of some fixing. I am told it's a broken welder and just needs a new front panel. Note: ALL items are being sold AS-IS and are for LOCAL PICK-UP ONLY. NO SHIPPING. Note: This item is being sold for a school. At the end of the auction. Winning bidder will receive the contact info for the administrator at the school. At that point, an appointment must be made with that administrator, for you to pick up your item. Please understand that we sell equipment for many government organizations. It is your duty to make contact with the organization for the pickup of your item. If you show up without an appointment, you will not be able to take your item with you. Item is located in Indiana, PA. Item specs. were obtained ... morefrom the internet and are checked for reasonability only. Please independently check all specs. to ensure accuracy. All items being sold for Indiana County Technology Center are being sold As-Is Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LINCOLN ELECTRIC NASCAR SP-135 PLUS MIG WIRE FEED WELDER --NO RESERVE--
This one comes as pictured. Thanks for looking into this auction and please check out my other auctions. Winning bidder pays all insurance. Shipping and handling fees. US SALES ONLY! Good luck bidding. IF YOU WIN THE BID YOU BOUGHT THE ITEM! SOME LARGER ITEMS MAY REQUIRE ASSEMBLY AND MAY NOT HAVE INSTRUCTIONS! IF THE ITEM IS BEING SOLD AS USED THAT MEANS IT IS NOT NEW. IF AN ITEM IS BEING SOLD AS IS FOR PARTS OR REPAIR THAT MEANS IT IS GOING TO BE A PROJECT. MAY BE MISSING PARTS, MAY BE BROKEN, MAY HAVE CRACKS, MAY NOT BE IN ORIGINAL CONDITION. PLEASE LOOK CLOSELY AT ALL THE PICTURES WHAT YOU SEE IS WHAT YOU GET. IF YOU HAVE A QUESTION ASK BEFORE YOU BID. IF YOU ARE IN QUESTION ABOUT AN ITEM PLEASE DO NOT BID. SORRY ABOUT ALL THE WORDY DESCRIPTION. BUT THERE ARE BIDDERS WHO DO NOT UNDERSTAND AS IS/ PARTS/ REPAIR ITEMS AND I HOPE THIS HELPS. ... morePLEASE CONTINUE TO BID WITH CONFIDENCE. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Snap-On Muscle Mig Welder MM250SL
Works well! Mussel Mig wire feed 185A on cart with wheels Texas sales tax additional if applicable Buyer pays shipping: 35.8" high. 14.5" wide, 34.5 deep 211lbs. Posted with lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f5c082ed2-0xf9-
|
|
|
Miller Dimension 452 Welder
ebay template Miller Dimension 452 Welder. Item Condition, 75% Great(Item looks presentable- shows signs of visible wear) Item Functionality, 100% Excellent(Item been used- Functions 100% Miller Dimension 452 Welder, Miller's Dimension Series of the three-phased. CC/CV DC power sources provide outstanding versatility, plus the endurance to handle demanding industrial applications. Engineered to provide exceptional performance across a variety of arc welding processes. Process. MIG(GMAW) Stick(SMAW) TIG(GTAW) Flux Cored(FCAW) Air Carbon Arc(CAC-A) Cutting and Gouging(through 5/16 in carbons) Submerged Arc Welding(SAW) Applications. Manufacturing Industrial Pipe Welding Heavy Manufacturing Maintenance and Repair Construction Shipbuilding Fabrication Foundries, Input Power Requires 3-Phase Power, Rated Output 450 A at 38 VDC. 100% Duty Cycle, ... moreWelding Amperage Range 20- 565 A. In CC mode 10- 38 V. In CV mode, A 20% Restocking fee will be charged on All cancelled orders. We will attempt to ship your item within 48 hours after payment has been received. To get a real-time shipping quote to your destination. Enter your country and zip/ postal code information into the shipping calculator and click"Get Rate" This item is eligible for pickup unless otherwise stated. Many countries impose their own customs. Duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do/do not cover this cost for all of our US customers. Shipping Rate Calculator Enter your ZIP/POSTAL code: Select your COUNTRY: United States Canada United Kingdom Afghanistan Albania Algeria American Samoa Andorra Angola Anguilla Antigua and Barbuda Argentina Armenia Aruba Australia Austria Azerbaijan Republic Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia and Herzegovina Botswana Brazil British Virgin Islands Brunei Darussalam Bulgaria Burkina Faso Burma(Myanmar) Burundi Cambodia Cameroon Cape Verde Islands Cayman Islands Central African Republic Chad Chile China Ch
|
|
|
MAYPOLE 140 AMP ARC WELDER WITH TIG TORCH AND PIPE PLASMA CUTTER ???
MAYPOLE 140 AMP ARC WELDER WITH TIG TORCH AND PIPE PLASMA CUTTER? MAYPOLE 140 AMP ARC WELDER AND TIG TORCH? AS FOUND IN GARAGE CLEARANCE BOTH ITEMS SEEM TO HAVE HAD LITTLE USE IF ANY. WHAT YOU SEE IS WHAT YOU GET
|
|
|
Miller Deltaweld 452 & S-64 Wire Feeder MIG Welder
® 452 Rock solid reliability. Exceptional value and power efficient operation make this the“Better! MIG solution for the most demanding industrial manufacturing applications. Combined with the 70 Series wire feeder this system is the workhorse of the industrial market. Complete with: Miller Deltaweld 452 Power Source, Miller S-75 Wire Feeder, MIG Gun, Flowmeter& Hose, Welding Ground, keeps welding parameters constant even when input voltages change ±10% Eliminates need to change welding parameters throughout the day. Two positive output terminals allow operators to optimize arc performance. Unique cooling system operates only when needed. Reduces contaminants drawn into the machine and excess noise in work areas. Enclosed circuit board provides additional protection by eliminating contaminants which cause premature failure of ... morecomponents. Internal components are protected from damage by thermal overload protection which automatically shuts down the unit if duty cycle is exceeded or air flow and cooling are restricted. Remote control capability allows operators fine tuning capability at an extended distance. 15 amp 115 VAC duplex receptacle allows operators the flexibility to run grinders. Drills, coolers, etc. from power source without the need for additional 115 VAC power in weld area. Power efficient for exceptional value and return on your investment. Digital meters for presetting or monitoring welding voltage or amperage for more precise control. Process MIG(GMAW) Flux Cored(FCAW) Air Carbon Arc(CAC-A) Cutting and Gouging(1/4 in. carbons) Applications Manufacturing Industrial Sheet Metal, Truck and Trailer Manufacturing, Shipbuilding, Equipment/Auto Manufacturing, Structural, Maintenance, Specifications Input Power Requires 3-Phase Power, Rated Output 450 A at 38 VDC. 100% Duty Cycle, Recommended Welding Range CV mode: 15- 38 V, Net Weight 384 lb(174 kg)
|
|
|
Hobart Handler 150 Welder(Portable)
Does not have the regulator or tank. Comes with everything in picture. Can send more pictures if requested and can answer questions. Let me know. Thank
|
|
|
AC/DC 250 Amp Dayton stick Welder
This welder has low hours use. I don't use it anymore. It comes with homemade dolly. Ground lead and welding lead with stick holder. Also there is 18ft GAWG/3C 600volt sun, oil, water resistiant 220volt power supply lead. Power lead will need a plug or wired direct. Local Pickup only.
|
|
|
Welder Dryrod II Portable Electrode/Rod Oven Type 5
Phoenix Dryrod II Portable Electrode Oven Type 5 Digital Themometer. Wheels, and handle for easy transport Electrode Capacity: 50lbs Heating Element: 300W Wire Wrap Voltage: 120/240V AC Temp. Range: 100-300 degrees Thermostat: Adjustable with high-limit switch Some dings. Paint missing from normal use, works good
|
|
|
FEDERAL TWIN HEAD PRODUCTION 50 KVA MCKAY/ ERECTOR SPOT WELDER W/ ROTARY TABLE
Up for Sale! FEDERAL TWIN HEAD PRODUCTION 50 KVA MCKAY/ ERECTOR SPOT WELDER W/ ROTARY TABLE MODEL ERECTOR SPOT WELDER Serial 33767-01-1 50 KVA 440 VOLTS 60 CYCLES COMTROL VOLTS 115 WELTRONICS CONTROL This item is used and has been tested to be in good working condition. This product can be previewed at our facility. CALL. TEXT OR EMAIL WITH QUESTIONS. SE HABLA ESPAÑOL. OCMACHINERY AT GMAIL COM 714 658 5390 We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. Fedex or USPS. FREE LOADING IN MOST PURCHASES
|
|
|
Ready Welder II Model #10250 24 Volts DC
VEGA TOOLS. INCLUDES& Description Ready Welder II Model#10250 Battery Powered Mig Welder 24 Volts DC Comes with what is seen in the pictures. Shipping Policies- Will ship within one or two business days after payment is received through PayPal. Will Ship USPS Parcel Post(5-7 days) Payment Methods Paypal is the only method accepted for payment. Payment must be made within three days of purchase. Failure to pay within three days will result in a non-payer stike with ebay. Sales Tax-We are required by law to collect taxes if we are shipping anywhere in the state of california. Return Policy- Please Look at The return policy tab. Contact us Email Questions By Clicking The"Ask Seller A Question" Link Located Under"Meet The Seller" Reasonable offers are welcome. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
CK TL210V RG 200 AMP TIG WELDER TORCH 25' W/MILLER 14 PIN CONNECTOR WELD WELDING
This is a good working used CK WORLDWIDE TRIM LINE 210V-RG 25 foot tig torch. It has the fingertip on/off switch that locks on so you don't have to hold it on long runs. Rated at 200 amps DC AND 200 amps AC at 100% duty cycle. It has a Miller 14 pin connector. Please Note: It will need a new argon gas hose I STAND BEHIND THE ITEMS I SELL WITH PRIDE AS A HARD WORKING AMERICAN PLEASE LEAVE POSITIVE 5 STAR FEEDBACK I WORK VERY HARD TO KEEP MY FEEDBACK RATING PLEASE CONTACT ME IF THERE IS A PROBLEM BEFORE LEAVEING FEEDBACK. THANK YOU, To learn more about this and other items I have for sale on ebay or for customer service go to georgesplasmacuttershop.com
|
|
|
MILLER DIVERSION 165 180 TIG WELDER WELDCRAFT LS1712R 12' TORCH WELD WELDING
This is a good working used weldcraft legacy LS1712R tig torch with the built in fingertip control made for the Miller Diversion 165 and 180 tig welder Comes complete ready to install Durable Flexable knuckle joint elbows allows easier torch movement reduces cable stress and protects the backend of the torch from potential high frequency leakage Fingertip switch provides remote amperage control and is easily interchanged to minimize downtime and improve welding productivity. No tools required to change the switch. Styled soft grip handle prevents slipping to improve torch control and increase overall operator comfort Efficient air cooled design allows for long term. Reliable welding performance especially for field applications and resists kinking for optimum gas flow and flexibity. Rated at 150 amps DC 125 amps AC at 60% duty cycle I STAND ... moreBEHIND THE ITEMS I SELL WITH PRIDE AS A HARD WORKING AMERICAN PLEASE LEAVE POSITIVE 5 STAR FEEDBACK I WORK VERY HARD TO KEEP MY FEEDBACK RATING PLEASE CONTACT ME IF THERE IS A PROBLEM BEFORE LEAVEING FEEDBACK. THANK YOU, To learn more about this and other items I have for sale on ebay or for customer service go to georgesplasmacuttershop.com
|
|
|
125 KVA Brandt Press Type Spot Welder, With Entron Solid State Control
125 KVA Brandt Press Type Spot Welder. With Entron Solid State Control S/N 11849. New 1980 Machine Description 125 KVA. 440 Volt 60 Cycle. Single phase. 24" Throat. 9" Lower Adjustment. Equipped With: Entron Solid State Control. Foot Pedal. Bernard Stainless Steel Cooling Unit- 115 Volt Single phase. Air Press. Inspect In our Branchburg NJ Warehouse. Questions call Dave@ 908-399-8133.
|
|
|
Thermal Dynamics ThermalArc DC Welder 1KA 75KVA 40-160V
Ebay Listing Form- We have 1000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- Thermal Dynamics ThermalArc DC Welder Power Supply 1000 Amp Model# TDC1A-40 FEATURES: Model Number# TDC1A-40 Manufactured By Thermal Dynamics Primary: 230/460 V. 188/94 Amps, 57 KW, 75 KVA, 60 Cy Frequency, 3 Phase. Secondary: 40/80/160 V. 1000/500/250 Amps, 100% Duty Cycle, 82/164/328 Max O.C.V, 90 Degree C Temp Rise. ~2462 lbs. 27.5 by 50 by 58 inches raw CONDITION: Condition appears slightly used. No documentation and not tested but don't see any sign of any issue. No external controller or anything that connects to it. CA# 3227 NOTES: don't buy if. TERMS& CONDITIONS: LINKS: CAVLON ITEM CATEGORIES: air compressors& parts, fans& blowers, bio energy fuel diesel components, bulk material handling, ... morecomputer. Network& telecom, construction equipment& tools, electric motors, electronic parts& assemblies, generators& backup power, hardware& fasteners high voltage components, high pressure components, industrial automation components, industrial electrical components, lab& industrial ovens& furnaces, liquid pumps, machine tools, mechanical parts& assemblies, optical parts& assemblies, pneumatics, power supplies, rf radio frequency components, robotics, test and measurement equipment, ultrasonic equipment, vacuum pumps& components, valves and fittings, video components, wire. Cable& shrink tubing, Thermal Dynamics does not have any specific information for this unit however they can be found on line here: Primary: 230/460 V. 188/94 Amps, 57 KW, 75 KWA, 60 Cy Frequency, 3 Phase. Secondary: 40/80/160 V. 1000/500/250 Amps, 100% Duty Cycle, 82/164/328 Max O.C.V, 90 Degree C Temp Rise. This dial is used to select the output voltage. 0- 100 Amps. Additional similar or related items may be available listed separately or on request. This
|
|
|
NELSON TR-850 STUD WELDER
NELSON TR-850 STUD WELDER STUD WELDER TYPE: ARC CAPACITY: 1/2" DIA. INPUT VOLTAGE: 208/230/460 CALL ROBERT@ 800-252-1919 WITH ANY QUESTIONS*Welder is used. But in good working condition. NELSON and NELSON STUD WELDING are registered trademarks of Nelson Stud Welding. Inc. Stud Welding Products is not affiliated with Nelson Stud Welding, Inc. and is not an authorized distributor of NELSON or NELSON STUD WELDING products.
|
|
|
Metal Man MIG/Stick 140 Welder (EXCELLENT CONDITION)
Great Machine! Does pretty much everything! Excellent condition. The Metal Man MIG/ STICK140 is a 120V input power portable dual process inverter machine capable of MIG welding up to 3/16" steel in a single pass. This machine is capable of MIG Welding. Flux Core Welding and DC Stick welding. Making it a great choice for operators needing a portable machine that is adaptable to fit your welding needs. The MIG/ STICK 140 is packaged with a regulator and gas hose for MIG Welding and a Electrode Holder for stick welding. Specifics: 120V 20 Amp 60 Hz Input Power• No Load Voltage 75V• Output Range MIG 27 to 140A• 30% Duty Cycle at 90A• Output Range DC Stick 30 to 70A• Overall Dimensions = 17.7 in. x 9.4 in. x 13.8 in. Weight = 44 lbs Like our product? Return the favorand"Like" us on Facebook to hear about our eBay Deal of the Week! ... morehttps:www.facebook.com/MetalManWorkGear
|
|
|
Miller matic Passport 907401 MIG Welder
Set up with a 115v 30AMP plug with a 11lb spool of 70S-6.030 wire. Per the picture I have a small cylinder for the inert gas. I do have the internal small cylinder as well. Posted with
|
|
|
91289 DUKANE ULTRA SONIC WELDER - #23703
Quote 23703#91289 DUKANE ULTRA SONIC WELDER New 1989. Serial No. 22762, Model 91289, EQUIPPED WITH: Carlson Pneumatic Feeder(Model 43A255. S/N US 22762) 43A270 Dukane Thruster Support Package CATALOGUE SPECIFICATIONS: Stroke Length. 7" Operating Pressure. 100 PSI NOTE: Factory Advises That This Machine Was Replaced By A Model 2170T22OP-L2 With A Replacement Price Of $15.085.00. PRICE: F.O.B. OUR WAREHOUSE. $950.00 All machines-equipment are subject to proir sell.
|
|
|
70 AMP MILLER "CRICKET" MIG ARC WELDER - #24786
Quot# 24786. 70 AMP MILLER"CRICKET" MIG ARC WELDER Serial No. JJ520812. Model"Cricket" EQUIPPED WITH: Welding Gun CATALOGUE SPECIFICATIONS: Secondary Rating: Amperage Rated@20% Duty Cycle. 70 AMP Open Circuit Voltage. Maximum. 29 Volts. 17 Volts Primary Rating: Volts. 115 Amps. 15 Single Phase. 60 HZ KW. 2 PRICE: F.O.B. OUR WAREHOUSE. $400.00. All machines-equipment are subject to prior sell.
|
|
|
220v MUREX stick welder
220v stick welder with leads. Buyer to arrange shipping
|
|
|
DURO DYNE PBSF-14 PINWELDER PIN WELDER PINSPOTTER WORKS FINE. VERY LITTLE USE
DURO DYNE PBSF-14 PINWELDER PIN WELDER PINSPOTTER WORKS FINE. VERY LITTLE USE DURO DYNE PBSF-14 PINWELDER PIN WELDER PINSPOTTER WORKS FINE. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ... moreISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f628f1a25-0x104-
|
|
|
LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM
aims LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by the Lincoln Electric Co. of Cleveland. Ohio. This is a used Idealarc Variable Voltage AC/DC Arc Welding Power Source with Bernard Cooling System in working condition. Model# TIG-300/300 Serial# AC-635451 Code# 9104-C Retails for over $6.500.00! Specifications: Input: Voltage: 208/ 230/ 460 Volts Amperes: 91/ 82/ 41 Amps Hertz: 60 Phase: Single. Output: Amperes: 300 Amps AC/DC Volts: 32 Volts Duty Cycle: 60% Maximum O.C.V. 80. General: Overall Dimensions: 33" x 60" x 45" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable ... moreTool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM LINCOLN IDEALARC TIG-300/300 AC/DC ARC WELDER w/ BERNARD COOLING SYSTEM Reliable Tool Inc. c 2011 | Powered by
|
|
|
made per lincoln sale by canadian tire mig welder 88amp
this welder machine is in perfect conditon ready to use brand new wire roll for steel includ.speed for the wire are ajustable and polarity can be inverted. fire intensity can be adjust i weld 1`/16inch to 1/4 of inch easy.
|
|
|
LARAMY TORCH 30-10 PLASTIC WELDER WITH EXTRA TIPS AND ELEMENTS
This Laramy 30-10 Plastic Torch welding kit is used but all is in good working condition. There are two different size Heating elements and attachments( AS seen in pictures) plus all the tips shown plus the extras. Please feel free to ask questions and thank you for looking.
|
|
|
Clements National Cadillac Heat Gun Model P 15 Single Ply Rubber Roofing Welder
Welcome to the best deals on ebay! Up for bid is this Heat welder comparable to Leister.Works perfectly and is in great shape.Can be used for detail work around corners of boxes.Pipes,any roof penetrations and small patches for Stevens and other single ply rubber roof systems.You can pick up a flat tip on ebay for about $25.00.
|
|
|
WORKRITE LATE MODEL 4000 WOOD WELDER REFURBISHED W/ WARRANTY
WORKRITE MODEL 4000 RADIO FREQUENCY GLUE UNIT SERIAL# 4B139. MANUFACTURE DATE 1997.UNIT HAS BEEN DISASSEMBLED, CLEANED, CASE REFINISHED, RE-ASSEMBLED AT STAGE 1 OF REFURBISHMENT PROCESS.AT STAGE 2 OF REFURBISHMENT, UNIT HAS BEEN DELIVERED TO THE WORKRITE FACTORY IN SAN DIMAS, CA. FOR TESTING AND REPLACEMENT OF ANY MARGINAL OR DEFECTIVE INTERNAL PARTS.UNIT THEN BENCH-TESTED FOR PERFORMANCE AND TO MEET CURRENT NEW UNIT SPECIFICATIONS.POWER TUBES TESTED OK. NO ONE SELLS FACTORY-TESTED UNITS THAT I KNOW OF. AND ALL OF OUR UNITS COME WITH A 30-DAY WARRANTY AGAINST DEFECTS IN WORKMANSHIP AND PERFORMANCE.TUBES ARE USED, UNLESS SPECIFIED, AND ARE GUARANTEED TO BE FUNCTIONAL, BUT ARE NOT COVERED UNDER 30-DAY WARRANTY.NEW TUBES AND PARTS ARE CURRENTLY AVAILABLE THRU WORKRITE FOR SPARES. WORKRITE MODEL 4000 IS A UNIT DESIGNED FOR A FACTORY ENVIRONMENT ... moreWHERE CONTINUOUS OPERATION IS REQUIRED(8-HOUR SHIFTS)UNIT COMES COMPLETE WITH ALL COMPONENTS/ MANUAL AS A NEW UNIT WOULD. BUY IT NOW" INCLUDES FREE CONTINENTAL UNITED STATES LTL DELIVERY TO COMMERCIAL LOCATIONS. GO TO WORKRITE INC. WEBSITE FOR SPECIFICATIONS. CURRENT PRICING ON NEW WORKRITE MODEL 4000 IS 4800.00 PLUS FREIGHT. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13f630d3974-0xf3-
|
|
|
CRAFTSMAN MID WIRE FEED WELDER MODEL 20511
Craftsmen Mid Wire Feed Welder Works Great Model 25011
|
|
|
DCC Hotspot TC Welder I
this is pre owned just have the tweezers welder information The HotSpot Capacitive Discharge Welder is designed to help solve your thermocouple fabrication and attachment problems. The welder generates an electric arc for fusing standard couple elements into freestanding beads and welding them to any thickness base metal. Visual and sonic indicators alert operator when the welder has cycled and is at the user selected power level. The system is powered directly from the AC line through a step-down transformer. Or from a gel type battery, which provides power for a few hundred welds off-line. The battery is automatically recharged whenever the unit is connected to AC power. Using welded thermocouples solves the couple generation and attachment problem in one operation. Merging these steps with the HotSpot generates obvious advantages in the ... moreareas of cost. Flexibility, accuracy, and the time required for installation. QUICK ACTION Give up waiting for ready made thermocouple junctions. And fabricate your own with the Hot Spot welder. It's much faster than gas welding and produces a more reliable contact than mechanical twisting or clamping. The Hot Spot is so small and portable that you can use it right where you want it. And it forms and attaches junctions in one step. ECONOMICAL Not only do you save the time of waiting for prefabricated couples. But you reduce costs by forming junctions from standard thermocouple wire. You also save the cost and effort of using clamps, brackets, glue, and other sensor mounting means. EASY-TO-USE You don't have to be a welder to be a success with the HotSpot. After a little experimenting to zero-in on the best energy settings and positioning techniques for the wire type and size being used. The inexperienced operator will quickly be producing satisfactory welds. FLEXIBLE Adjustable weld power output matches the varying requirements of the thermocouple materials and wire gauges. Make butt welds. And third party or free standing junctions, all with the same device. PAYMENT IS
|
|
|
Miller Syncrowave 180 Sd Welder Cc AC/DC. Arc / Tig welder Good Working Cond
Miller Syncrowave 180 Sd Welder Cc AC/DC. Arc/ Tig welder Good Working Condition This was my friends fathers. It has been just sitting at his Mechanic shop for a while. He has no use for it so we are selling it. Pick up in San Clemente California. shipping avail if you plan it all out. There will be a deposit required or full payment by mail or in person. CONDITION: There are 2 attachments with this that have over 50' length. The one cable as you can see in the picture is rusty. I don't know alot about these types of items so feel free to ask questions and I will answer to the best of my ability. PLEASE READ THE FINE PRINT~ IT IS IMPORTANT~ THANK YOU! NO INTERNATIONAL SHIPPING~ PICK UP PREFERRED BUT WILL HELP WITH THE SHIPPING OF THE ITEM My pictures are part of my description so be sure to look them over. thank you Before bidding. ... morePlease ensure that you have fully read item descriptions& conditions as I do not give refunds. I do my best to provide an accurate description& do not mislead buyers in anyway. Not everything is in perfect or brand new condition; unless stated. If you are somehow unhappy with your purchase or if I have missed describing something significant, please contact me Prior to leaving feedback- I will definitely take responsibility for my mistakes and things can always be resolved with good communication. YOU MUST PAY WITHING 4 DAYS OF AUCTIONS END OR eBay WILL AUTOMATICALLY SEND YOU A NON PAYMENT REMINDER. The end result will of not paying will be an unpaid item will be recorded on the buyer's account so please only make offers if you are serious about making the purchase. An offer is a binding contract and a commitment to buy if accepted. If you can not pay in the 4 day requirement then contact me prior to purchase so I can turn off the non-payment tab. INTERNATIONAL BUYERS PAY $2.50 HANDLING FEE FOR INSURANCE AND DELIVERY CONFIRMATION. THIS IS FOR ALL PARTIES INVOLVED'S PROTECTION. flat rate shipping is the only avail shipping for International buyers due to safety o
|
|
|
PROSPOT I4 INVERTER RESISTANCE SPOT WELDER
The i4 Inverter Resistance Spot Welder is designed to handle the difficult to weld materials such as boron steels and Advanced High Strength Steels( AHSS) These new metals are rapidly becoming the material of choice among car manufacturers. The i4 includes an OEM programmable feature with detailed repair illustrations and customized weld programs. New innovative Spot Gun from Pro Spot features double-acting cylinder. Wide-spreading electrodes, self-aligning electrodes. The Pro Spot i4 comes with a variety of extension arms to accommodate any welding job situation. 10 different Single-Sided welding applications give you the power and versatility to complete any job. The i4 features a large 4x6" monitor capable of displaying images and OEM repair procedures. The i4 Software is stored on an upgradeable flash card. We consistently release ... morenew repair procedures and features so you'll never have an obsolete i4. i4 features an easy upgrade to include a PR-155 MIG welder. It can be installed later as an upgrade package or ordered with MIG welder built-in from the factory. THIS MIG WELDER HAS ONLY BEEN USED 4 TIMES*
|
|
|
Nelson Stud Welder Gun NS-10 Welding Tool Gun with Connecting Cord
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! | | | Nelson Stud Welder Gun NS-10 Welding Tool Gun with Connecting Cord, Click to View Image Album Click to View Image Album Click to View Image Album Up for your consideration is a Nelson Stud Welder Gun. Model NS-10, Welding Tool Gun with the Connecting Cord and ends as seen in the pictures. Used but guaranteed to work perfect and Shipping is FREE in the USA. Items are usually shipped within 24 hours of payment. Please email for a quote if you need it shipped internationally. Please email with any questions and check out our Ebay Store. Please contact us if you have any questions at all. We are here to help you with your purchase decisions. Please view the total listing as there are more pictures at the bottom of the listing. Shipping Cost. If quoted in the listing, is an estimate ... moreand is based upon us using the least expensive way of shipping to you if your address is a street address in the Continental United States Only(48 States) all others(i.e. foreign country, Alaska and Hawaii residents) please contact us prior to purchase for a shipping quote. Thank you. Payment, I accept the following forms of payment: PayPal Shipping& Handling, $0.00 FedEx Ground® Additional Information, Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Policies, Shipping and Insurance, Please see description regarding details for shipping and insurance information. Please make sure you read all of our ad and view all the photos. Thank you for visiting with us. Come back often to our store which features antiques and other items we acquire at estate sales and auctions. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Make your listings stand out with FREE Vendio custom templates! FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
|
|
|
Lincoln Electric Ranger 305 G Welder Multi-Process Engine K1726-3 Generator
What You'll get: Lincoln Electric Ranger 305 G Welder Welding Multi-Process Engine K1726-3 Drive Chopper Technologies MIG TIG Kohler Generator Gas Due to the weight and size of this unit. It will need to be freighted, please contact via email for a freight quote or to schedule a local pickup. Dimensions: 30" x 21" x 42" Other Accessories that are Not pictured or mentioned under"What You'll Get" are Not included Please visit our eBay Store for more similar items! Testing: Pulled from a working environment. Engine turns over right away and runs great. Meter shows 3000 hours. Multi-process functions as expected and welder is fully functional Guaranteed Working! Cosmetics: Pictures are of the actual item. Please See pictures for cosmetics. Policies& Definitions: Shipping Most items ship out within 1-2 BUSINESS ... moredays after the payment clears. We allow local pick up. Handling fee of $9.99 and CA tax will apply. We combine shipping to save you money if the items can be combined and shipped safely. We offer a combined shipping discount of $3 for each additional item purchased. Free shipping offers do NOT apply to Puerto Rico. Alaska, Hawaii and international transactions Definitions: GUARANTEED WORKING MEANS: The item is guaranteed working as long as we receive it back within 30 days from the purchase date. We will replace the item at no additional cost if the item is DOA. If replacement is Not available. We will refund the purchase price. Please bid accordingly. AS-IS MEANS: The item is sold AS-IS Where is. This means that the buyer acknowledges that the item may or may Not be working and that the item may or may Not be complete and the buyer is willing to accept the risk. Please bid accordingly. Shipping and handling cost is Not refundable under any circumstances and the buyer is responsible for any additional shipping cost. please bid accordingly. Return Policy Every item we sell is carefully inspected before it is shipped and is tested to the best of our ability. If merchandise is
|
|
|
LINCOLN SAE-350 DIESEL WELDER DEUTZ CODE 8798 F-3L-912
USED LINCOLN SAE-350 VARIABLE VOLTAGE DC ARC WELDING POWER SOURCE.MODEL SAE-350-F3L-912.CODE 8798,SN A-1125994,ENGINE DEUTZ TYP F3L912,SERV CODE 2611,NR 7585382,1 FN KW 81,1/MIN 1800,PS HP CV 47,KW 2701/06,WE RAN UNIT AND PRESURE GAGE READS 90 PSI,AMP METER 15 AMP.WE HAD THIS UNIT REPAIRED AT WARRANTY CENTER,REPLACED BRIDGE RECTFIER,UNIT HAS BEEN IN STORAGE FOR QUITE A WHILE,WE BELIEVE UNIT IS A 1988.NICE MACHINE,STARTS RIGHT UP AND RUNS WELL,AUTOMATIC IDLE CONTROLS OPERATES ALSO. WE ARE A 22 YEAR OLD COMPANY LOCATED AT 1403 A WEST 12TH STREET. LITTLE ROCK, AR, 72202. PHONE(501) 378-0241. BUYER PAYS FREIGHT. WE CAN OFFER OUR OUTBOUND FREIGHT DISCOUNTS OFFERED THROUGH PRIORITY 1 LOGISTICS. WE WILL SHIP TO CANADA OR MEXICO AT BUYER'S EXPENSE. BUYER PAYS CUSTOMS, ETC. BUYER WELCOME TO INSPECT ITEMS ON SITE. THANKS FOR YOUR INTREST.
|
|
|
Lincoln SA200 Welder, Part, Short Hood Fan Guard
Lincoln SA-200. Short Hood, Fan Guard Screen. Uses, in good condition. No warranties or guarantees. Shipped by USPS Parcel Post. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13f635a6dab-0xfe-
|
|
|
Lincoln Welder, SA200, Pipeliner, Part, Oil Pan, Continental Engine
Used ool pan that was removed from a Lincoln SA200 welding machine with a Continental. F-163 engine. Uses, as is, no warranty. Shipped USPS parcel post.
|
|
|
Weller battery operated hand held welder
Used Condition Weller hand held battery operated Welder. Model BP645. Requires 3AA Batteries not included. Comes with instruction manual. Any questions please contact through ebay. Thanks for looking!
|
|
|
Used 30 AMP Receptacle and Plug NEMA 10-30R 10-30P Welder Oven Dryer
For your consideration today is a 30 amp receptacle and plug. 220-240 volt. Perfect to make a long extension for a welder. Plug is made by Cooper and receptacle is made by Pass& Seymour. NEMA specs 10-30R 10-30P In very good used condition with no problems or missing parts. Ready to use. Please note I pack my items very carefully. Please see my feedback regarding shipping. But if your item does get run over by a truck. I will immediately send a call tag and have the item returned back to me. Upon receipt of the item I will issue a full refund including shipping. Let me take care of submitting a claim. As a seller, I feel it’s my responsibility and not yours. Insured shipping to the lower 48 states is $10.00. Shipping to Alaska/Hawaii is extra. No P. O. boxes please. Shipping to USA only! Thanks For Looking! Powered by The free listing ... moretool. List your items fast and easy and manage your active items.
|
|
|
BRANSON 8401 ULTRASONIC WELDER
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 05131340021 Manufacturer: BRANSON Description: BRANSON 8401 ULTRASONIC WELDER Capacity: Model Number: 8401 Serial Number: Additional Information: BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE SURE TO INCLUDE YOUR EMAIL ADDRESS WHEN REQUES
|
|
|
IBM #7540 Robot Welder Used for Parts
IBM#7540 Robot welder. This welder was taken out of service about 5 years ago. The customer said it did work when they took it out of service. But not sure if any parts were taken off. This unit is being sold for parts and may be picked up or we will ship by truck lines on a pallet. Any questions call(708) 927-1975 Central time.
|
|
|
Prostar Bernard MIG welding gun 150 amp 10' with Miller Welder Plug
This is a Prostar/ Bernard MIG gun for a Miller welder. It is a 10 foot length with a 150 amp capacity. These guns are far superior to a OEM Miller gun. In fact Miller even offers them as an additional charge upgrade available with a new welder directly from them. I have included the full text from their website below. If you use one of these once, you will wonder how you got along without it, they are the BEST. These are around $200 at Praxair and you can buy this like new one here for much less. Free shipping in the lower 48. Any other locations will be additional. Thanks for looking. MIG GUN 10' 150A MILLER PLUG Premium quality Miller connection MIG gun replacement by ProStar. Features: 10' cable(3.0m) 150 amps. Improve weld quality-spatter shield within nozzle smoothes gas flow and protects diffuser. Shrink down time-threadless ... moredrop-in contact tip is faster to change after burnback without tools. Boost gun performance-large diameter tip base and tapered seat provide better electrical conductivity and heat transfer. Quick change neck rotates 360° to allow greater access to hard-to-reach welds. Power cable with tear/abrasion resistant jacket and two spare trigger leads. Semi-automatic. Air-cooled ProStar MIG guns are durable-the trigger tested to pulling over one million times without failure. Ergonomically designed handle is constructed of high-impact glass-reinforced composite. Internal gas hose resists kinking while long-lasting fittings maintain conductivity. Rugged. Easy-to-convert gun connection, power pins with male threads and can be changed without removing rigid strain relief, trigger cable adapters make reconnecting trigger wires unnecessary. Centerfire nozzle built-in spatter shields protects the diffuser and produces smoother. Less turbulent and concentrate shielding gas flow for less oxidation, contamination, and better protects the weld puddle. Centerfire tips are threadless and drop and lock into place(no tools required to change) Remain centered even after hard use, last up to
|
|
|
Vintage MILLER ARC WELDER promotional COIN PIGGY Bank Dialarc 250 AC/DC WELDING
Vintage MILLER ARC WELDER promotional COIN PIGGY Bank Dialarc 250 AC/DC WELDING Untitled Document Vintage MILLER ARC WELDER promotional COIN PIGGY Bank Dialarc 250 AC/DC WELDING Promotional piggy bank by Miller. In excellent condition. Approximately 4 1/2" x 3" x 4" in size. Payment is expected within 3 days of auction completion; immediately for'Buy it Now' items. PayPal for payment. Items will ship next day from clearing payment. Shipping is through Canada Post. And includes a $1 packaging/handling fee. Please email me for a quote if shipping calculator is not working. Questions will typically be answered the same day. Or even immediately. Fully positive feedback is appreciated and will be reciprocated. gsrx_vers_523(GS 6.6.3(523)
|
|
|
NICE!! WESTERN ARCTRONICS 50 KVA 36" FULLY AUTOMATIC ROCKER ARM SPOT WELDER
aims NICE! WESTERN ARCTRONICS 50 KVA 36" FULLY AUTOMATIC ROCKER ARM SPOT WELDER read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Western Arctronics. This is a used Air Operated Fully Automatic Rocker Arm Spot Welder in GREAT condition. Model# 50KVA Serial# FH-063 Features: Air Pressure is utilized to replace operator actuation. An air cylinder actuates the arm and tip closure which is triggered by a foot switch. An air pressure regulator and Air Filter is provided. The top pressure is adjustable through a special Air Pressure Sensing Control which actuates the weld cycle time. A two stage heavy-duty foot switch is connected to the spot welder with portable cable and plug-in. Allowing large radius of operation for even the largest sheet metal sections. Two stage ... moredesign allows closure of tips only, further depression triggers weld cycle. Foot switch can be unplugged and removed to prevent unauthorized operation of machine. Incorporates all the features of the air operated model except an Automatic Sequence Programmer is added consisting of four electronic timed functions- squeeze. Weld, cool, off. This model is outstanding where high production, precision repeatability and fully automatic operations are required. The sequence programmer has a repeat and non-repeat control. The repeat setting will allow continuous repeated weld cycles as long as foot switch is depressed. The non-repeat setting will perform complete welding cycle on each depression of foot switch. A test switch is also provided causing all functions to be active except the actual welding allowing for inspection or set up of weld sequence program. The foot switch can be replaced with an actuating switch on customer's production fixture allowing a completely automatic unmanned welding operation. Specifications: Output: 50 kVA@ 50% Duty Cycle. Throat: 36" Arm Spacing(minimum/ maximum) 6-1/2" 11" Primary Volts: 230. Primary Amps: 210. Frequency: 60 Hz. Maxi
|
|
|
Miller Welder, Millermatic 175, 230v, MIG welder.
This welder is like new. Was used approximately 8 times. Includes manuals. In perfect working order. Buyer pays shipping.
|
|
|
Snap-On MIG Portable Welder
Snap-On MIG Portable Welder YA217 Welder had little use over the years. I bought it new from the Snap-on dealer and have owned it since new. It is a great little welder that is easy to use and can be plugged into a 110 outlet. The welder has normal wear and tear. I did plug it in and everything appears to be working. However. I did not have a bottle to test the gauges. One of the gauge covers has become cloudy. The gun will probable need a new tip and gas nozzle(can be purchased for about $20 online) If you have any questions, please do hesitate to send me an email. Will sell and ship to someone in the United States. 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-13f6602457b-0xf8-
|
|
|
Lincoln Electric Magnum Cooler Model 10 Welding Welder Good Shape
You're bidding on this used. Lincoln model Cooler 10. As pictured it shows some scuffs and small dents associated with normal use but no abuse. It is fully functional. Ready to go to work for you. Please e-mail me with any questions. Thanks for looking.
|
|
|
BRANSON 2000 AED ULTRASONIC WELDER W/HORNS & PLATES 40hz
THIS AUCTION IS FOR A USED BRANSON 2000 AED ULTRASONIC WELDER WITH 2 HORNS AND 2 PLATES. 40HZ MACHINE. WELDER IS IN GOOD WORKING CONDITION! PLEASE CHECKOUT MY OTHER AUCTIONS! PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. I WILL LOAD FOR FREE ON YOUR TRUCK OR TRAILER. YOU CAN PICK UP FOR FREE OR BIDDER CAN ARRANGE SHIPPING. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Thermal Arc Plasma Tig Welder Ultima 150- 1 OR 3 PHASE 220 VOLTS
HERE IS YOUR OPPORTUNITY TO OWN A ULTIMA 150 AT A REALISTIC PRICE FOR A USED WELDER.I AM RETIRED AND SELLING OFF SOME OF THE EQUIPMENT THAT I HARDLY EVER USE. I HAVE HAD THIS WELDER FOR ABOUT 3 1/2 YEARS AND USED IT ABOUT 3 TIMES. DOING SHEET METAL WORK ON EARLY MOTORCYCLES. IT WAS CHECKED OUT WHEN I PURCHASED IT BY A QUALIFIED REPAIR STATION. I HAVE EXTRA CONSUMABLES AS WELL AS THE# 3 TORCH HEAD AND FOOT PETAL. GUAGES INCLUDED! NO TANK.THIS WILL BE A PICK UP SALE ONLY! YOU COULD DRIVE 250 MILES FOR THE PRICE OF FREIGHT. LOCATED IN MENTOR OHIO. THIRTY MILES EAST OF CLEVELAND. EASY ACCESS TO US 90 AT RT.44. THANK YOU FOR READING. QUESTIONS? THRU E-BAY OR CALL GARY 8:00 TO 8:00 EST. 440-639-0858 THERE IS NO GUARANTY IMPLIED WITH THIS SALE. REMEMBER IT'S USED! THE DEPOSIT TO BE DISCUSSED AT CLOSING AND CASH AT TIME OF PICKUP. Posted with
|
|
|
Lincoln Electric Hi-Freq Tig Welder Attachment, Torch, and 5-pin Foot Pedal
Like new Lincoln Hi-Freq high frequency tig welder attachment with Union Carbide HW 17 torch and 5-pin plug foot pedal. This attachment makes any AC/DC stick welder a high frequency start tig welder. Just wire it up. Add argon and start to AC tig weld aluminum. The tig welder attachment is like new condition while the foot pedal and tungsten torch are used. This is an economical way to broaden the use of any A/DC stick to AC high frequency tig. Lincoln Electric offers a free downloadable operators manual at their web site.
|
|
|
Dukane 91394 43A255 82579 Ultrasonic Welder
Dukane 91394 43A255 82579 Ultrasonic Welder Dukane 91394 43A255 82579 Ultrasonic Welder Model 91394 43A255 82579 Item is for parts not in working condition. Insurance is included in the handling fee. When purchasing an item requiring freight shipping contact us for the freight cost before paying for the item. If the buyer requests to have a transaction canceled a 15% restocking fee will be charged. Once the item is purchased the buyer is responsible for the item cost and all shipping charges. Visit my Ebay Store at. Www.davesindustrialsurplus.com All items are for sale locally so we reserve the right to end any item. Shipping Items shipped within 3 business days after cleared payment has been received. We reserve the right to ship by the carrier of our choice. Items shipped UPS will be covered if under $100. Larger items will be shipped via ... morefreight. Contact us for a quote. A $20.00 pallet fee will be included with your quote. INTERNATIONAL OVERSIZED- For oversized international shipments. Contact us for a quote prior to bidding. Customer Service Items have been tested when possible. Seven day"no questions asked" return policy. 15% restocking fee may apply. Shipping is non-refundable. Return shipping costs are the responsibility of the customer. If item does not function as described call 419-445-1111 for an RMA(Return Merchandise Authorization) If you have questions or concerns contact our office at 419-445-1111 Mon-Fri 8:00AM- 4:00PM EST or Call Dave at 419-551-7874 from 4:00PM- 8:00PM EST Mon- Fri and from 9AM- 8:00PM EST on Sat& Sun, Product Use and Suitability Many states and localities have codes and regulations governing sales. Construction, installation and/or use of products for certain purposes, which vary from place to place. While Dave's Industrial Surplus attempts to assure that the products it sells comply with such codes, it cannot guarantee compliance, and cannot be responsible for product installation or use. Before purchase and use of a product, please review the manufacturer’s
|
|
|
Cosmos Kabar 15KW RF Welder, Ultrasonic Welder Sealer, m/n 15000
Used Cosmos Kabar 15KW Welder. Purchased in 2007 and lightly used by Tacoma WA based military contractor. S/N 15C530. 48" Bar 46" x 52" Bed Machine Dimensions 52Wx75Dx84H approximate weight 3.000#s. Sold As-Is, Where Is but was working when uninstalled. Make me an offer- motivated to sell fast. Video walk around here. http:youtu.be/e4645TquhOU
|
|
|
T890 BGA IRDA WELDER INFRARED HEATING REWORK STATION o7
Puhui T890 Welder IRDA Station Hi. You are bidding on a lightly used Puhui T890 Welder IRDA Station, I used this to repair laptop and gaming systems but my workload has increased so I am selling this to purchase a more expensive unit, this is a great machine for those who want to repair BGA chips and very sosphisticate, this was purchased straight from Puhui and comes with a 1 year warranty I will transfer ownership to the winning bidder upon completed sale. When I first received the unit i did notice the LCD his a line in the middle but that didn't bother me, I have fixed 2 xbox 360s and 2 laptops using this beautiful machine for the little amount of time I've owned it, my loss your gain, good luck Bidding! Manufacturer's Warranty. 1 year! Condition: Light Used Grade A(Line in the middle of LCD Doesn't affect viewing or functionality) ... moreIncludes: Puhui T890 Welder IRDA Station. AC Plug. Puhui T890 CD. Original Puhui T890 Box. Returns: Returns are accepted 14 days after the date of receipt. Feedback: Please contact me if you are unstatisfied with any of our products. We will resolve it quickly.
|
|
|
TAYLOR WINFIELD 50 KVA HEAVY DUTY INDUSTRIAL SPOT WELDER
TAYLOR WINFIELD 50 KVA HEAVY DUTY INDUSTRIAL SPOT WELDER W/ MODERN CONTROLS CALL JIM FOR MORE INFO 714 6121480
|
|
|
75 kVA National Electric Model 75 Press Type Spot Welder
75 kVA National Electric Model 75 Press Type Spot Welder Stock Number 1166409, Model 75, Output 75 kVA, Throat 18" Electrical Requirements 440 V, Overall Dimensions 42" x 60" x 74" Technitron Control. Model MCS2109, Foot Pedal Control, Dual Palm Buttons, Rebuilt by TJ Snow Company, TJ Snow S/N 84-629 PAYMENT We accept Paypal. Wire Transfer, Check(must wait until clears to pick up) and Cash. We also accept credit cards direct(Visa, Mastercard, American Express, Discover) with a 3% service charge. Payment must be made in full within 4 days of a winning bid. CONTACT US You may contact us 9 AM- 5 PM Eastern Time weekdays at 419-536-4445. You can also use eBay's messaging feature. After hours. Contact Alex at 419-350-2986. If you purchase a"Local Pickup Only" item, please contact us as soon as possible for pickup ... moreor shipping instructions. SHIPPING If a shipping price is listed. We will ship within 2 business days after payment clears. The majority of our items are marked as"Local Pickup Only" This means that you are responsible for making freight arrangements, including palletizing, disassembly, rigging, loading, and transport. For your convenience, we offer all of these services for a fee based on the size/ complexity of the item. If your item requires freight shipping, please take into account the costs associated. Items not picked up within 30 days of payment may be subject to a storage charge of $25 per day. Items will be considered forfeit after 90 days, or after storage costs exceed the price of the item, whichever comes first. TERMS All sales are as-is. Where-is, with all faults. We make our best effort to fully describe every item so that you may confident in your purchase, but we cannot make any guarantees due to the used nature of our items. We recommend a personal inspection for all items to verify accuracy and suitability to your project. Returns will be handled on a case-by-case basis. These terms take precedent over any other terms that may be on this listing.
|
|
|
Victor CA35 Welder Torch w/WH36FC Torch Handle
This Victor CA35 Welder Torch w/WH36FC Torch Handle is in working condition. Item shows normal wear from use and handling(see actual photos) Item comes as shown in photos. ftl12-172
|
|
|
Lincoln Invertec STT II Surface Tension Transfer Process Unit / Welder
You are bidding on a Lincoln Invertec STT II Surface Tension Transfer Process Unit This unit is used. Sold with 7 days return option if DOA. Buyer pays for shipping and handling. This item weighs approx. 150# and must be shipped freight. Please contact us about shipping. Your payment must be received within 5 days after this auction is closed. Thanks. Lincoln Invertec STT II Surface Tension Transfer Process Unit Input power: 208/230/460/3/60 Rated output: 200A/28V/100% 225A/29V/60% Input current: 32/30/16A Output range: 0-124 Background. 0-450 Peak Dimensions: 23.3" H x 13.2" W x 24.4" D Policies: Please check out the picture(s) in this auction. We ship all of our items via UPS Ground if they are in the Continental US and USPS Priority if they are international unless otherwise specified. If you want different shipping. Contact ... moreus before you pay as the calculated charges are for these methods. If you DO NOT agree to Terms and Conditions. Payment Methods, Shipping and Handling Fees or our Return Policy please DO NOT bid on this auction. All international shipments require a contact phone number before shipping. Please contact us with this info. We ship immediately upon confirmation of payment. Returns: We want you to be satisfied and this transaction to go smoothly. Please do not hesitate to contact us with questions or concerns. No Credits or Exchanges will be made without communication first between us and the buyer. Please contact us immediately with details and contact info. When applicable we will send a replacement instead of issuing a refund. Shipping charges are NON-REFUNDABLE. Payment Methods: PayPal: We prefer PayPal. Credit Cards: We accept VISA. Mastercard.
|
|
|
Taylor-Winfield Model SB-6-20 Air Operated Floor Model Spot Welder
Taylor-Winfield Model SB-6-20 Air Operated Floor Model Spot Welder-Inv#7223 You are bidding on a Taylor-Winfield Model SB-6-20 Air Operated Floor Model Spot Welder-inv#7223 TO OUR POTENTIAL CUSTOMERS: Hello and thank you for taking the time to consider bidding on our machinery and or equipment. We have done our best to provide as much information and as many details as possible so you will be better able to bid with confidence. We have a very good reputation as well as having 3 generations of machinery knowledge and experience to offer our customers. All of our machinery& equipment is offered on a simple as is. As shown& described basis, and it will usually be in very good overall condition, having been cleaned, checked and cycled unless otherwise stated in our ad. Please consider the majority of our machinery and equipment is taken ... moredirect from service/operation as it is acquired mainly through our customers, and in most cases is simply surplus to their ongoing needs. We will always be willing and happy to try to answer every question a customer might have to the best of our ability, however we do recommend that you that ask all your questions as early as possible giving us time to answer before the auction ends. Sold as-is and all safety concerns including safeguarding. Setup and operation are buyer's sole responsibility. IMPORTANT: FREIGHT COSTS ARE DETERMINED BY WEIGHT. SIZE AND DESTINATION, SO PLEASE OBTAIN RATES PRIOR TO BIDDING. AND PLEASE BE AWARE THAT SHIPPING TO A RESIDENCE IS ALWAYS MORE EXPENSIVE THAN SHIPPING TO A BUSINESS ADDRESS. PLEASE ALLOW 3-5 DAYS FOR YOUR ITEM TO BE SHIPPED UNLESS OTHERWISE ARRANGED. PLEASE NOTE THAT A 7% RHODE ISLAND STATE SALES TAX WILL BE ADDED TO ANY ITEMS PICKED UP PERSONALLY BY THE BUYER AT OUR FACILITY* ALSO: ANY PURCHASES MADE FROM OUT OF THE UNITED STATES MUST BE PAID FOR USING ELECTRONIC BANK WIRE TRANSFER. WE WILL NOT ACCEPT ANY OTHER FORM OF PAYMENT. Technical Specifications: S/N: 4949 Operating voltage: 220V/1PH/60HZ Power: 20 KVA Transformer number: 28
|
|
|
Erico Jones PW500 Pin Welder Stud Welding System 110VAC 1PH 60Hz 20Amp Type CD
Erico Jones PW500 Pin Welder Stud Welding System 110VAC 1PH 60Hz 20Amp Type CD P/N: 601-0000-00 Solid State Capacitor Discharge This item includes all shown above: Welding gun and leads. 40 feet of extension, and welder unit with power cord. Item is in very good working condition. And has been tested to work fine. The wiring on the gun has been tape repaired(pictured above) This Listing is for(1) Erico Jones Stud Welding System USED. ShelfS17 061310000JB Shipping options: As you can see we offer a variety of shipping options for domestic shipping. Please be aware that items MUST be purchased and paid by 1pm eastern time in order to be shipped the same day for UPS. Otherwise your package will be picked up the following day. Call us at 866-293-8981 if you have concerns about when your shipment will ship. Credit Card payment processing: If you ... morewould like to pay using credit card over the phone. You can call our customer service toll free at 866-293-8981. They will be happy to help you complete the payment over the phone. Sales tax: MUST be charged with local pick up OR if item is shipped to an Indiana address. Unless a proper tax exempt for is filed with our company. No exceptions. International shipments: For international shipments we ship primarily United States Postal Service. We will ship USPS. If the insured value does not exceed their maximum insurable value, in which case we may opt for an alternate company such as UPS or Fedex at our discretion. That varies depending on your country. If it does exceed insurable value, we ship UPS. In that case, we require your UPS account number for your customs duties, and fees to be charged to. We are NOT responsible for duties. Buyer pays all duties and fees. We also will only declare the value of you item at it's ACTUAL purchase price. It is against federal laws to declare anything BUT actual sale value. Freight Items: If your item is a freight item. We will gladly prepare it for shipping on a pallet for a $50 fee, in addition to actual freight cost. If you are an i
|
|
|
LINCOLN ARC WELDER SA-250-D3.152 PORTABLE PERKINS DIESEL 230 VOLTS
LINCOLN ARC WELDER MODEL: SA-250-D3.152 S/N: A-919101 CODE: 8003 PERKINS DIESEL ENGINE 110-230 VOLTS SHIELD ARC DC WELDER PORTABLE/ BALL HITCH PLEASE CALL AARON AT 540-599-0592 WITH ANY QUESTIONS OR IF YOU NEED A SHIPPING QUOTE DUE TO PREVIOUS ISSUES WITH NON-PAYING BIDDERS. WE REQUIRE A $500 DEPOSIT WITHIN 24 HOURS. PLEASE CALL IF YOU HAVE ANY ISSUES WHEN MAKING YOUR DEPOSIT. FULL PAYMENT FOR THE ITEM IS DUE WITHIN 7 DAYS. IF YOU HAVE QUESTIONS ABOUT THIS ITEM, PLEASE CONTACT US BEFORE BIDDING OR BUYING.
|
|
|
Lincoln Idealarc R3R 400 Welding Machine Stick Tig Gouging Welder
Lincoln Idealarc R3R 400 230/460 3 phase welder used for stick. Tig, and gouging applications. Includes ground lead Has never been used. Still has 1 year of warranty left. Posted with eBay Mobile Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f6c9fd565-0x102-
|
|
|
Hughes Aircraft VTA-60 Welder Weld Head+ Attachments+Bimba Flat-1 Air Cylinder
Dalton. GA 30720 Hughes Aircraft VTA-60 Welder Weld Head+ Attachments+Bimba Flat-1 Air Cylinder, This auction is for a Hughes HRW-100B 100 Watt Welding Power Supply. The system shows normal wear and was fully operational when removed from service. Since the item has not been tested. The VTA-60 is sold as is. Please be sure to take a look at all our current auctions. And don't hesitate to ask us if you have any questions regarding any of our items. Payment: We accept PayPal. MasterCard, Visa, Discover and American Express. All in state residents within our state will be charged 9.25% state sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Shipping: Packages are usually shipped ... morewithin 72 hours of payment receipt(excluding Saturday/Sunday) Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS or USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. Returns: All items are sold as-is. We accept returns only if the item was not as described in the auction. Buyer must return the item exactly as received within 14 days and will be responsible for all additional shipping charges. We do our best to present accurate. Detailed information about every item we sell. If you have any questions, please contact us before placing your bid. About Us: Asher Auctions offers reselling services for surplus medical equipment. Electronics, and many other products. Through various online resources we can find the buyers interested in your excess inventory. From listing to shi
|
|
|
Sonobond SW635 Ultrasonic Welder w/UG 35-13 Controller 35kHz? Plastic? Metal?
Sonobond SW635 Ultrasonic Welder w/UG 35-13 Controller This came from a factory shut-down. It turns on and appears to be complete with weld horn. We don't have the proper knowledge or air pressure to fully test this. Assumed to be in excellent. Used condition, but sold as is. Terms of Sale Buyer pays $128 shipping(continental US) HI. PR, AK and Canada pay $258 shipping. Paypal usually ships within 24 hours. Other international bidders PLEASE email for a shipping quote before bidding. Thanks for your interest. Please email with any questions.
|
|
|
Miller Coolmate 4 TIG Welder Water Cooler - free ups - junE13
HELLO AND WELCOME. REPEAT BUYERS, YOU KNOW THE RULES. NEW BUYERS AND LOW FEEDBACK BUYERS, THE FOLLOWING RULES BELOW ARE A CONTRACT CONDITION OF PURCHASE, THEY ARE A RESULT OF 13 YEARS OF ONLINE SALES. PLEASE READ THE TERMS OF THIS SALE BELOW On the issue of contact, it is of the utmost importance that if you have any questions or concerns about this sale that you call/text me at(954-588-0535) Mon-Fri 8am-7pm central standard time* DO NOT EMAIL ME. ITS BEST TO CALL OR TEXT ME* I spend 7 days a week at auctions and picking up items for sale. So I very seldom get your emails in time. I still get around 200 emails per week and my inbox is overloaded. After the sale I do provide my private email for those buyers who cannot call me. It's a very hectic lifestyle: 5-9 BUSINESS DAYS FOR RECEIPT OF ITEM. I ALONE AM ALWAYS SELLING THOUSANDS OF ITEMS ... moreSO THIS MAY SHIP IN 1 HOUR/ 1 DAY OR 4 DAYS DEPENDING ON WORKLOAD BUT IT WILL BE THERE BY THE 9TH BUSINESS DAY. MOST WILL GET THERE WAY BEFORE THAT TIME BUT I'M JUST COVERING MY BASES, JUST IN CASE I FALL BEHIND. MY PRICES ARE CHEAP BECAUSE I DO EVERYTHING MYSELF SO YOUR UNDERSTANDING OF MY DELIVERY WINDOW IS MANDATORY BEFORE PURCHASE. IF YOU NEED IT FASTER. CONTACT ME VIA TEXT OR CALL, YOU CAN ALSO SEND SELLER A MESSAGE OPTION AFTER SALE. MY INTERNET HISTORY IS MASSIVE AND WITH A GOOGLE SEARCH YOU CAN SEE MY COMMITMENT TO THOSE HONEST BUYERS WHO FOLLOW THE FEW BASIC TERMS OF ALL MY MANY AUCTIONS Select items will need a signature at time of delivery due to their rarity. I will always let you know if you will have to sign for this when I ship it via email. Please make sure your address is up to date and valid. Sending any item is the same as sending your hard earned cash in the mail. IF THIS IS A HARD TO FIND, UNIQUE/ EXPENSIVE item, PLEASE EXPECT TO SIGN FOR IT FROM THE CARRIER I EXPECT YOU THE BUYER TO KNOW THE SPECIFICS OF THE ITEM YOU ARE BUYING. I GET MANY ITEMS EVERY DAY AND IF I KNOW THE PARTICULARS OF THIS ITEM. I WILL LIST THEM. JUST GOOGLE THE MODEL NUMB
|
|
|
Miller Bobcat 250 NT Welder Generator 20 hp 250 Amps 10k Watts
YOU ARE BIDDING ON A USED MILLER BOBCAT 250 NT WELDER GENERATOR. THIS MACHINE HAS 489 HOURS AND WAS USED PRIMARILY AS A GENERATOR DURING HURRICANE IRENE. 10.000 WATTS 250 AMPS 20 HP GASOLINE POWERED WELDING LEADS ARE NOT INCLUDED PLEASE ASK QUESTIONS PRIOR TO BIDDING.
|
|
|
MILLER 300 AMP ARC WELDER DIESEL IN PHX AZ
THIS IS A MILLER BD 40 300 AMP 4053 HRS ARC WELDER DIESEL LOCATED IN PHX AZ CAN HELP ARRANGE SHIPPINGFOR DETAILS CALL RICH AT 623-204-2915
|
|
|
LINCOLN 250 AMP ARC WELDER DIESEL IN PHX AZ
THIS IS A LINCOLN 250 AMP ARC WELDER DIESEL MODEL SA-25003152 LOCATED IN PHX AZ CAN HELP ARRANGE SHIPPINGFOR DETAILS CALL RICH AT 623-204-2915
|
|
|
MILLER ARC WELDER ELECTRIC 2 CYLINDER IN PHX AZ
THIS IS A MILLER ARC WELDER ELECTRIC SINGLE OR 3 PHASE MODEL SRH-333 LOCATED IN PHX AZ CAN HELP ARRANGE SHIPPINGFOR DETAILS CALL RICH AT 623-204-2915
|
|
|
HARRRIS ARC WELDER GAS 2 CYLINDER IN PHX AZ
THIS IS A HARRIS HYDRAULIC ARC WELDER GAS 2 CYLINDER MODEL S120 225 AMP LOCATED IN PHX AZ CAN HELP ARRANGE SHIPPINGFOR DETAILS CALL RICH AT 623-204-2915
|
|
|
miller welder CST280
Up for bids Is a Miller CST280 stick.Tig,single or three phase welder,everything works as it should and it welds great.It is wired for standard 220v 50amp welder plug.Comes with new HD leads and owners manual.Auction is no reserve.Thanks Lynn
|
|
|
Lincoln Weld-Pak 100 Mig Welder With Accessories 110 Volt Ahrma Street Bike
Lincoln weld-pak 100 mig welder 110 volt. with accessories. tank has argon gas in it. welder was used only a couple of times. I would consider trading it for a street bike or a dirt bike from the 1970's. local pick-up only. cash in person no paypal. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f7157bad6-0x105-
|
|
|
Leister Heat Gun Welder Hot Triac S In Carrying Case And Tools
Leister Triac S Hot Air Welder Gun Come in Carrying Case with two nozzles and other tools Posted with
|
|
|
SC-5151, POWCON 103302-001 WELDER
Description UP FOR SALE IS INVENTORY# SC-5151. POWCON 103302-001 WELDER. SER# 402-32310. CURRENTLY WIRED FOR 460 VOLTS. MAX OPEN CIRCUIT VOLT: 80. PRIM VOLT: 1 PH-230. 3 PH-230/460, PRI AMP: 1 PH-40, 3 PH-32/20. KW: 1 PH-7.4. 3 PH-12.6/11.9. OUT: LOAD VOLTAGE- 1 PH-28, 3 PH-32. LOAD AMPS: 1 PH-200. 3 PH-300. DUTY CYCLE: 60% WEIGHT- 81 LBS. QUANTITY- 22. CONDITION OF ITEM 1) NEW AND IN BOX 2) NEW BUT NO BOX X 3) USED. AS-IS" 4) FOR PARTS ONLY Postage and Handling All items are shipped out United Parcel Service(UPS) Price based upon weight and location. Equipment Recovery Corp can ship to a PO Box. With US Postal Rates applying. To determine shipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC will ship UPS to Canada with buyer responsible for all customs and international fees applying. Freight Items ... moreover UPS weight and size restrictions will be sent via common carrier. Customer is responsible for the freight charge. Unloading freight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective way of shipping. ERC will not ship common carrier Internationally. Store Hours/ Local Pickup Equipment Recovery Corp. is open Monday through Friday 8am-4pm. Saturday by appointment. Any of our items can be picked up to save on shipping charges. 800-372-2408. Invoicing Invoices will be sent normally within 24 hours of auctions end. ERC has an Ebay store where more inventory is listed and offered for sale. Please check out our great deals on used equipment each week. Customer Service OUR GOAL IS COMPLETE CUSTOMER SATISFACTION. Our items are used and sold“as-is” However we strive to make every customer happy and satisfied. 800-372-2408. Created by eBay Blackthorne ver. 3.2.169.0
|
|
|
Miller CP300 welder power supply for parts
Used Miller welder power supply for parts. S/N JG106125. 460/575 Volts, 3 phase, Has bad heat range.
|
|
|
TRANSARK EASY WELDER CHIPPING HAMMER WIRE BRUSH HOOD
TRANSARK EASY WELDER CHIPPING HAMMER WIRE BRUSH HOOD COMPLETE WELDERS STATION JUST START WELDING JUST BEEN SERVICED WORKS PERFECT. CHECK ALL THE PHOTOS THEY ARE ALSO PART OF THE DESCRIPTION AS KEY INFO IS DISPLAYED IN THEM. what you see in the photo is what you get. LOCAL PICK UP AVAILABLE FOR ALL ITEMS IN DECEPTION BAY QLD 4508 EMAIL ME FOR ANY QUESTIONS PLEASE. FULL MONEY BACK GAURANTEE IS AVAILABLE IF YOU ARE NOT HAPPY WITH PRODUCT POSTAGE IS CALCULATED TOO YOUR HOME ADDRESS VAI AUSTRALIA POST OR COURRIER SERVICE FOR LARGE ITEMS. EMAIL ME YOUR POSTAL CODE IF YOU WANT A MORE ACCURATE POSTAGE COST I WILL POST AUSTRALIA WIDE IF POSSIBLE WITH AUSTRALIA POST OR COURRIER. FOR A QUOTE EMAIL ME Powered by
|
|
|
Mig Welder Gun Sleeve
This item is used. It is a ToughGun Tregaskiss Mig Welding Gun Sleeve. This item is being sold AS-IS. SRA^
|
|
|
UNITEK MIYACHI ML-2331B YAG LASER SYSTEM WELDER 50W WITH OPTICAL HEAD & FIBER
BT# 7366 B01A1-080.1Z You are looking for: UNITEK MIYACHI ML-2331B YAG LASER SYSTEM WELDER 50W WITH OPTICAL HEAD& FIBER USED ITEM. FULLY TESTED! GOOD WORKING CONDITIONS. 30 DAYS WARRANTY! Manufactured by: MIYACHI. UNITEK. Additional info: LASER SYSTEM WELDER WITH OPTICAL HEAD AND FIBER Model: ML-2331B Laser Type: YAG Input Power: 200 VOLTS 3 PHASE 50/60 Hz 15 AMPS, Max. Output: 50 J/P. 50 WATTS Diameter of Fiber(Wavelength) 1.064 µm Pulse Duration(msec) 0.3ms- 20ms. Wave Length: Yag 1064nm/ Aiming 633nm. Puse Repetition rate: 1-50 pps Water temp. 5 to 352°C. ID of connecting hose: 15mm. Beam Delivery: Fiber Cooling: Water Size: 1.2 m x 1,5 m x 1 m. Accessories: Optical Focus head FOL-30A-707-AB(2 pieces) and optical fiber(2 pieces) TEST VIDEO ON GALLERY! Click over the picture below to access the photo gallery: PLEASE LOOK CAREFULLY ... moreAT THE PICTURES TO SEE THE DETAILS Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 2 business days We ship with: Powered by
|
|
|
EC-3112, MILLER SRH-303 ARC WELDER
Description UP FOR SALE IS AN ERC INVENTORY# EC-3112. MILLER SRH-303 ACR WELDER. RHC-3 PRIM V230/460; SECONDARY 32V MAX OCV 80. WEIGHT- 690 LBS WITH PALLET. Condition of Item This item is in used condition. This item/lot is being offered“AS IS” with no written. Implied or expressed warranty nor other guarantee as to its condition or fitness for use. Unless otherwise stated(see known deficiencies) the condition of this item/lot(or it’s fitness for any use/purpose) is unknown. Postage and Handling All items are shipped out United Parcel Service(UPS) Price based upon weight and location. Equipment Recovery Corp can ship to a PO Box. With US Postal Rates applying. To determine shipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC will ship UPS to Canada with buyer responsible for all customs and international ... morefees applying. Freight Items over UPS weight and size restrictions will be sent via common carrier. Customer is responsible for the freight charge. Unloading freight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective way of shipping. ERC will not ship common carrier Internationally. Store Hours/ Local Pickup Equipment Recovery Corp. is open Monday through Friday 8am-4pm. Saturday by appointment. Any of our items can be picked up to save on shipping charges. 800-372-2408. Invoicing Invoices will be sent normally within 24 hours of auctions end. ERC has an Ebay store where more inventory is listed and offered for sale. Please check out our great deals on used equipment each week. Customer Service OUR GOAL IS COMPLETE CUSTOMER SATISFACTION. Our items are used and sold“as-is” However we strive to make every customer happy and satisfied. 800-372-2408. Created by eBay Blackthorne ver. 3.2.169.0
|
|
|
Vintage Red BULLARD HARD BOILED HAT IRONWORKER WELDER FIREFIGHTER HARDHAT HELMET
Vintage Red BULLARD HARD BOILED HAT IRONWORKER- WELDER- FIREFIGHTER FIBERGLASS HARDHAT HELMET CANVAS STRAP Looks to be complete and all the parts work as they should. Surface scratches. Scuffs from normal wear. USED. Over the next few weeks I will be listing items that belonged to a Hopkinsville Kentucky Fireman Fire Fighting collector. There are so many items that I haven't even seen them all at this time. I know there are nozzles. Extinguishers, toys, and helmets. Please add me to your favorites list so you can keep up with all the fire department collectibles that I will be selling this month. I sell antique. Collectible& vintage items on e b a y so please add me to your favorites and check back often to see what will be coming up for auction next. Remember that you can save money on multiple purchases with combined shipping. Please ... moreexamine the pictures in order to see the condition of the item. I will be happy to combine shipping costs for any multiple purchases whenever possible. Items may be picked up at my home in Lexington Kentucky. The picture provided may be larger than the actual item. Please message me with any questions or concerns. I strive to give excellent customer service. A well described item, all at a fair price.
|
|
|
SNAP-ON WELDER MUSCLE MIG WELDER SYSTEM MM140SL w TIG SET UP RAT ROD METAL WORK
SNAP ON MIGHTY MIG WELDER MMSL140 WITH UNUSED TIG SET UP 600.00 VALUE UNUSED. I PAID AROUND 3200.00 FOR THIS THREE YEARS AGO. USED VERY LITTLE WORKS PERFECT! I NEED THE MONEY MY SON IS IN THE HOSPITIAL. SO HE COMES FIRST. IF THAT WERE NOT THE CASE. I WOULD NOT EVEN SELL THIS. I WILL SHIP MUST GO TO LOCAL BUSINESS OR TERMINAL FOR YOU TO PICK UP. OR YOU CAN ARRANGE FREIGHT FROM MY WORK ADDRESS. ASK ALL QUESTIONS BEFORE BIDDING. IF YOU WANT A FREIGHT QUOTE CALL MIKE AT 573-785-0585. THATS MY WORK. DON'T THINK YOU HAVE THE WRONG NUMBER JUST ASK FOR MIKE. THANKS FOR LOOKING AT MY ITEM BID WITH CONFIDENCE I HAVE A 100% RATING. AGAIN WORKS PERFECT! USED VERY LITTLE DOES NOT INCLUDE GAS BOTTLE. IT IS LEASED AND WILL HAVE TO BE RETURNED IF YOU WANT THIS SHIPPED AND CALL ME FOR A QUOTE. I WILL GIVE YOU A QUOTE NUMBER AND COST FOR SHIPPING. YOU ... moreWIN! EMAIL ME FIRST WITH YOUR QUOTE NUMBER. I WILL SEND YOU A INVOICE THEN YOU PROCEED TO CHECK OUT. SHIPPING IS NOT ONE DOLLAR!
|
|
|
1974 Lincoln SA-200 welder
1974 Lincoln SA-200. Tore down to the frame and completely gone threw. Original engine starts rite up no smoke runs great, all new brushes, all new wiring, PC board, belts, hoses, starter, t-stat, 1-wire alternator, converted to volt gauge, aux. oil press gauge idle:38psi/run:40psi, temp gauge, rebuilt mag, rebuilt carb, radiator was rebuilt and press. tested by Melbourne radiators in Melbourne, Florida, all stainless hard ware, the list goes on. Must look close at the pics to appreciate the detail. The sheet metal shows its age under the paint with some minor pitting, I left it that way because I liked the vintage of it, the hood has quite a few dings in it but functions just fine, I planed on replacing it with a polished stainless hood but never got that far. I'm selling it because I don't have a need for it and would like to see ... moreit on the back of a rig truck where it belongs. This item is used, and is sold as is no warranty, It is available for local pickup only, upon your arrival I will demonstrate that it welds without a problem! I can assist loading it into the bed of a truck/flatbed, or open trailer with a chain fall. I will accept pay-pal only sorry for the inconvenience, payment is due at the end of auction. I'm not in this to make a bunch of money I just want a fair deal, and will do my very best to give you the same, from one pipe hand to another. Thanks for looking. ag14.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*bd%3Eag14-13f74b5a89e-0x100-
|
|
|
USED MILLER ELECTRIC SPOT WELDER WT-1515 RESISTANCE SPOT WELDING MACHINE
A Miller spot welder. Serial# JE755992. Item is from an estate. Functionality is unknown. Powers on, light lights up, and when the button is pushed, it makes noise, I have no way to test it beyond that. The auction sold it as working, but I have not used it myself. It does show some soiling and wear, I do not see any major physical issues with it. Sold AS IS, untested. Photos show condition well, so Please see the photos and email any questions. Buyer pays shipping, I will combine shipping. Please email after the auctions are done so I can combine the shipping costs as the calculator will not do it automatically. I will ship as soon as payment is received. Check out my!
|
|
|
Tite-Spot Welders DiGi S.W.A.T Welder
Please read details before bidding 1- We want positive feedback. 2- Please contact us before leaving negative/neutral feedback. We will always do what ever we can to make every buyer a happy buyer. 3- You have 10 days money back guaranteed and real person customer services. 4- After 10 days. The sale is FINAL( no exception) 5- No return. No refund, if negative/neutral feedback given without contacting the seller. 6- Bidder with"0" feedback must contact seller before placing a bid. If not your bid will be canceled without notice. Feedback: I leave positive feedback for all smooth transactions and I ask for the same in return.I do my very best to describe items to the best of my ability and send them out ASAP.I will always try my best to your shopping experience a pleasant one.I will leave feedback as soon as feedback is left for ... moreme! DESCRIPTION: YOU ARE LOOKING AT A Tite-Spot Welders DiGi S.W.A.T Welder IN EXCELLENT WORKING CONDITION. AUCTION INCLUDED: Everything as seen on the pictures. No more or no less(actual pictures) FEATURES: 10 VOLT OUT PUT COMPRESSED AIR COOLING PINCH WELDING TWO GUN WELDING SINGLE GUN WELDING PULL STUD WELDING HEATING& SHRINKING Complete DiGi S.W.A.T. Welder includes: 50' 10-3 Power Cord. 10' Dia Pneumatic Tires, 5' Dia Front Casters. Extended Wheelbase, Welding Cable Brackets, Tall Easy Push Handle, 16 Gauge Steel Case. Red& White Finish, Stainless Steel Front, Transformer is Fan Cooled, Instructions printed on Front Panel INPUT POWER 208/240 Volt Single Phase- 60 hz 50 Amp Breaker Required Rated 8.7 KVA 50 hz Special Order 480 Volt Special Order This is the most heavy duty built welder I've ever seen and when you pull the cover off you'll know what I'm talking about. Following is the link for all the info on this welder. or just Google Tite-Spot Welder. SHIPPING COST: 1- International buyer. Please contact the seller for the shipping cost 2- Package will ship without insured unless buyer pays shipping insurance. 3- Seller is not responsible for
|
|
|
Miller Trailblazer 251 NT 8KW Generator Welder Gas Engine 1 Phase with Trailer
Up for Auction is this Miller Trailblazer 251 NT 8KW Generator Welder Gas Engine 1 Phase with Trailer Condition: Fully Functional. Has been used and shows normal signs of wear. Has scratches. Scuffs and rust throughout. 12.629 Hours 120/240V 67/33A Max KW: 8 Cont. KW: 7 Phase: 1 PFL 1 60Hz Max RPM: 3750 Auction includes: Miller Trailblazer 251 NT 8KW Generator Welder Gas Engine 1 Phase with Trailer Pictures of the actual item are shown. Returns The buyer will have 14 days to return the item if not satisfied for full refund of the purchase price less 10% restocking fees and less shipping costs. For returns please do not ship the item back before contacting us and agreeing upon a return. We are not responsible for return shipping. If the item is not returned in the same condition it was shipped we will reject a refund. NO Shipping Local Pickup ... moreOnly. Must arrange your own pickup. Please Check out our Other Items we are Selling* We truly aim to please. If you have any questions about an item. Just ask! We try to respond quickly to all inquiries. If there are concerns with won items, please let us know before leaving negative feedback. We’ll do whatever we can to resolve problems. Our intention is not to make money on shipping- we want to get our items to our buyers in the safest. Most expedient and most economical way as possible. Please email any questions thru Ebay or phone us@ 248-987-6230 About Us: Motor City Pawn Brokers Inc. has been serving the Metro Detroit area and Ebay customers around the world for over 22 years. We are very proud to be an Ebay Seller with great feedback. This means you can bid with confidence. Most items have a no questions asked refund policy. We have over a 99% positive feedback rating. We are very easy to work with and ship merchandise ASAP. We look forward to serving you soon.
|
|
|
Farmhand Versa Arc 95 mig welder
Here is a used mig welder that is NOT working properly. It seems that it is not getting enough power to weld properly. I was trying to weld sheetmetal and i had it on highest setting. It still can weld. But not real good. I was told that the electronic circuitboard inside might be the problem. I bought a new welder so i don't want to mess with this one anymore. It is beyond my capabilites to try and fix it. I replaced the drive motor last year($60.00) It can do flux core wire or solid wire. The polarity is set for solid wire and shielding gas, but regulator,hose, bottle are not included.
|
|
|
Lincoln SA200 Welder, Parts, Oil filler with cap, Continental Engine
Lincoln SA200 Welder. Part, Oil filler tube and cap. Shipping to the Lower 48. No warranty or guarantee. Cleaning out some parts to make room.
|
|
|
Lincoln SA200 Welder, Parts, Valve Cover, Continental Engine
Lincoln SA200 Welder. Part, Valve Cover. Shipping to the Lower 48. No warranty or guarantee. Cleaning out some parts to make room.
|
|
|
Used Bug-O Superflex Welder
Used Bug-O Superflex Welding Carriage Very good condition Comes with 30 day warranty f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13f77cbd302-0x102-
|
|
|
Lincoln SA200 Welder, Parts, Front engine cover.
Lincoln SA200 Welder. Part, Front engine cover. This came off of a Continental F163 engine that was in a Lincoln welder. the cover is aluminum and is in very good condition. No cracks or warpage. It sealed up nice. the oil seal will need to be changed. I left the old one in so you can get the proper number for the replacement seal. Sold as is, no warranty or guarantee. shipped to the lower 48 states.
|
|
|
MILLER GOLD STAR 300SS CC DC STICK WELDING SMAW WELDER
MILLER GOLD STAR 300SS CC DC STICK WELDING SMAW WELDER 3 Available. Guaranteed in good working condition! Bid a bunch! Includes 40' Power Cable and Factory Running Gear. Serial: KB103620. Stock: 902288. Input: 200/230/260V. 69/60/30A; 13 KW, 3PH, 60Hz. Output: 300A@ 32V. 60% Duty Cycle; 70 Max OCV.
|
|
|
Miller 350 CC/CV 2011 Model Multiprocess Welder
This auction is for one Miller 350 CC/CV welder only. The welder serial number is MB500331A it was built by Miller in 2011. The machine is still under warranty by Miller which is 5 years parts 3 years parts and labor. The machine is in perfect working order and welds smooth. It is in supreme condition as shown by the pictures no dings or scratches. It was used at an indoor facility for TIG welding open butt schedule 40 pipe. It was never subjected to air arc or high amperage uses. If you are looking for a great welder to give you years of service this is it. I expect payment thru Pay-Pal only with in 24 hours of winning the auction. I will ship welder to you with in 24 hours of receiving money thru Pay-Pal. I only ship to USA only no exceptions. Good luck bidding.
|
|
|
Miller Gold Star 400SS welder reconditioned
Miller Gold Star 400SS welder reconditioned Description: Miller Gold Star 400SS DC Arc Welder Made in the U.S.A. by Miller Electric Co. of Appleton. Wisconsin. This is a DC Arc Welding Power Source in good working condition. It ha s been tested by our service department and approved. This unit was orignally built for the US Navy. Specifications: Input: Volts: 230/ 460 Amperes: 76/ 38 kW: 19.8 kVA: 30 Hz: 60 Phase: Three Output: Volts: 36 Amperes: 400 Duty Cycle: 60% Maximum O.C.V. 70 FP-20-THS-6.20D* We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best ... moreof our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. Due to the nature of used and surplus items. We have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Shipping: WE ONLY SHIP TO CONFIRMED PAYPAL AND EBAY ADDRESS! This item will SHIP VIA MOTOR FREIGHT/ COMMON CARRIER(LTL) This shipment will be delivered curb side or to a loading dock. And it is the buyer's responsibility to unload the item. There is an extra charge for lift gates and residential LTL deliveries. Unless we are contacted, this charge will be added to all invoices. We ship daily, Monday through Friday. Buyer pick up is also welcomed. We take pride in packa
|
|
|
Rocky Mountain Model 660 Orthodontic Welder
This auction is for a Rocky Mountain Model 660 Orthodontic Welder. As far as I know. It works. When turned on, the electrodes heat up. I do not have any auxiliary soldering cables, manuals or original packaging. Sold as is, just the welder. Thanks for bidding.
|
|
 |