|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States And it will be a great support for you. The energy-saving can reach up to 50% as well as efficiency is increased by 30%. - Lower Cost - HBC5500 50AMP ... moreplasma cutter is made of high quality components.
Buy It Now
Free Shipping Condition: Used Location: Hebron, United States 💯 SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, ... moremild steel, copper, and aluminum. 💯SETUP WITHIN 1 MIN: The pre-installed NPT 1/4” industry type D plug and air filter regulator allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be setup quickly within 1 min. 💯OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. Engine Power : Electric (AC).
Buy It Now
Free Shipping Condition: New Location: Portland, United States 2T/4T/TEST function,easy to operation. This cutter can work normally at minus 20 degree. Maximum Cutting Thickness is 1/2 ", ideal clean cutting thickness ... moreis 2/5 ". High cutting speed, smooth cutting section and no polish demands.
Buy It Now
$19.99 Shipping Condition: Used Location: Stevens Point, United States Package includes : 1pcs Power source RBC-5000D 1pcs 2m cable +Earth clamp 1pcs gas regulator with 2pcs connector 1pcs 4m pt31 Cutting torch and 2pcs torch ... moreaccessories 1pcs 20cm 110/220V conversion line 1pcs 20cm Welding gas hose.
Buy It Now
Free Shipping Condition: New Location: Pottstown, United States Backed by Eastwood's no-hassle 3-year warranty. (1) Versa-Cut 60 Amp Plasma Cutter. Rated 60 amp output on 240 VAC; 30 amp on 120 VAC. 120 or 240 Volts ... moreAC input. Input: 240 VAC and 120 VAC, 50/60 Hz, 1 Ph.
Buy It Now
Free Shipping Condition: New Location: Baldwin Park, United States Type: Non-touch Pilot Arc Plasma Cutter. v APC-50HF incorporates the most advanced IGBT inverter technology and non- touch pilot arc cutting process es, ... moreresulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc.
Buy It Now
Free Shipping Condition: New Location: Sunnyvale, United States 【 Non-HF】: Non-HF Blowback Start, there is no HF interference. 【SETUP WITHIN 1 MIN】 The per-installed NPT 1/4” industry type D plug and air filter regulator ... moreallows you to quick connect to your air compressor by using the stand coupler existing on your air compressor.
Buy It Now
Free Shipping Condition: New Location: United States Compatible with 40A, 50A plasma cutting machine PT31 torch standard, flexible and durable neck. Applicable Models: Suitable for 40A and 50A Models. Plasma ... morecutter torch adopts humanized design, straight handle, comfortable to hold and easy to use.
Buy It Now
Condition: Used Location: Brookpark, United States This was a working piece of equipment when removed from my shop. This a heavy duty shop plasma cutter. Comes with air regulator and a couple extra cutter ... moretips. The input voltage ranges from 230 volts to 575 volts 3 phase.There is no reserve.
Buy It Now
Free Shipping Condition: Used Location: San Bernardino, United States Miller Spectrum 1000 DC Plasma Cutting System Features This piece of equipment is very user-friendly and also very simple that needs no tools to operate ... moreor to handle. The 1000 is excellent for maintenance. Scrap yards, body shops, and in-shop fabrication. It is also safe for use in noise and interference sensitive locations. Specifications Serial Number: K6268396 Stock Number: 903448 Output Volts:120 Amperes: 70 Duty Cycle: 100% Air Pressure 70 PSI Input Volts: 230/460/575 Amperes: 54/27/22 Phase 3 Hertz: 60
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Standard Severance Cutting Thickness: 1. Maximum Severance Cutting Thickness: 1.5 in. v APC-80HF incorporates the most advanced IGBT inverter technology ... moreand non- touch pilot arc cutting process es, resulting in excellent arc stability.
Buy It Now
$80.00 Shipping Condition: Used Location: Portland, United States This is a listing for Lincoln Electric 20 Plasma Cutter K2820-1. New. The Lincoln Electric 20 plasma cutter is a professional grade. Lightweight, portable ... moreplasma cutting system that can be carried anywhere with little effort. It is ideal for the farm, HVAC, autobody shop, contractor, sheet metal fabricator, and homeowner for metal cutting jobs. The Lincoln Electric 20 is recommended for cutting sheet metal to 1/8 in. material with a maximum capacity of 1/4 in. Inverter design makes the 21 lbs. unit very portable and ideal for HVAC and autobody work. Operates on 115V. 20 amp for max. output, 115V, 15 amp for 10-15 amp output. For cutting expanded metal. Stainless steel and aluminum. No high-frequency output. Built-in top mounted air pressure regulator. Fan-cooled unit has 40-50% duty cycle depending on the setting. Saddle hooks for convenient cable storage. Includes cutting torch assembly with 9.5 ft. reach. Ground clamp with 8 ft. cable, power cord and plug. Uses standard compressed air. 65 PSI@ 3.5 CFM. Free US shipping. Payment within 3 days is required
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Standard Severance Cutting Thickness: 1. Maximum Severance Cutting Thickness: 1.5 in. v APC-80HF incorporates the most advanced IGBT inverter technology ... moreand non- touch pilot arc cutting process es, resulting in excellent arc stability.
Buy It Now
$92.40 Shipping Condition: Used Location: Omaha, United States Whether you are a professional welder or a DIY enthusiast, this plasma cutter is an essential tool to have in your arsenal.
Buy It Now
Free Shipping Condition: New Location: United States 1 set of consumables. Compact plasma cutter uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum. 1 ... morex Plasma Cutter. Pilot arc torch efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States scope of delivery 1pcs Power source RBC-6000 1pcs 3m cable +Earth clamp 1pcs gas regulator with 2pcs connector 1pcs 3m Cutting torch and 2pcs torch accessories.
Buy It Now
Free Shipping Condition: Used Location: Littleton, United States Click thumbs to Enlarge Any additional photos will be below Webstore11 has 14 years of experience selling a wide range of items on eBay. We take pride ... morein serving you! Check out our huge selection of diverse products. Everything we sell is guaranteed as described or your money back! Your satisfaction is our number one goal. Keep in mind that we offer hassle-free returns with prepaid return shipping. If you have any questions or problems. Please contact our Customer Service Representatives Jill or Kellie via email. You can also call us at 952-646-1775. Thank you for shopping at Webstore11! Snap-On Plasma Cutter Features and Benefits: Inverter Technology Cuts a maximum of 3/8" and will sever up to 1/2" Adjustable amperage range from 5-25 Amps Automatically accepts 115V or 230V input power supply LED warning system What's included: Comes with attached cables pictured Condition: Very Good Condition Previously Owned Some minor scratching consistent with light use SKU: HV5-234-321450-ps Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days. Unpaid cases will automatically be open by eBay 7 days after purchase. Please note. If you enter the wrong billing address your card will be declined. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. We Ship to confirmed addresses only! Make any changes to your address before paying. All items will be shipped to your confirmed billing address after payment. We will not accept changes after payment! We Ship to the Continental US ONLY! Please contact us on APO/FPO Shipping. These will cost more. We no longer ship to Hawaii. Shipping Carriers: UPS& USPS 1-6 Day. Local Pickups: $5 Per item handling fee. Contact us for details. We offer a 14 Day Money Back Guarantee unless noted"As Is" We do our very best to accurately des
Buy It Now
$19.40 Shipping Condition: New – Open box Location: Spring Hill, United States Introducing the Firepower 1445-1925 25i Portable Plasma Cutter, designed for easy cutting of steel, stainless steel and more with a power output of 25A ... moreat 115V. Plasma Cutter needs a new connector and/or just opened up and the lock nut put on as shown in the picture.
Buy It Now
$89.95 Shipping Condition: For parts or not working Location: Wichita, United States You are bidding on a lightly used Hypertherm Powermax 45 in excellent working condition. Machine cuts 1/2" metal. Single phase 208-240 volts. 25' ... morehand torch. Buyer pays flat rate of $40.00 shipping to the continental U.S. only.
Buy It Now
Free Shipping Condition: New Location: United States Type:P80 Plasma Cutter. The plasma cutting gun cutting gauge has a magnetic base, which can be directly connected to the work piece being operated for ... moreeasy operation. Circular radius: 5cm-50cm/1.97" 19.67".
Buy It Now
Condition: Used Location: Middlebury, United States Tested and works as it should 220V 1Ph. Country of Manufacture: United States. Model: Pro Cut 60. See Test Cut in photos. Will there be a dock or forklift. ... moreTo get a freight quote we will need to know the following.
Buy It Now
$109.99 Shipping Condition: Used Location: Wichita, United States THIS PLASMA CUTTER HAS NOT BEEN TESTED BUT SEEMS TO BE IN GOOD SHAPE .
Buy It Now
Free Shipping Condition: New Location: United States [Pilot Arc Function]: BTC500DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. Item model number: BTC500DP ... more7GEN. Style: BTC500DP 7GEN 110/220. 2T/4T automatic cutting release your finger.
Buy It Now
Free Shipping Condition: New Location: United States Manufacturer: ARCCAPTAIN. SAFETY & DURABLE ARCCAPTAIN welder machine have passed a variety of professional tests and certifications including TUV and ... moreANSI standards before leaving our factory. It's also tiny and light enough to move with strap in any workplace(strap included).
Buy It Now
$100.01 Shipping Condition: Used Location: Waterbury, United States Are you looking for a high-quality plasma cutter? Check out the Everlast Powerplasma 52i! This powerful machine is perfect for cutting through a variety ... moreof materials, including metal, plastic, and more. With its durable construction and advanced features, it's the perfect choice for any welding or cutting project. Whether you're a professional welder or a DIY enthusiast, the Everlast Powerplasma 52i is sure to impress. With its cutting-edge technology and reliable performance, it's the perfect tool for any job. So why wait? Order yours today and start enjoying the benefits of this amazing plasma cutter!..
Buy It Now
Condition: Used Location: Cedarburg, United States Esab Plasma Cutter. Max Output: 50 Amp. WE'LL DO OUR VERY BEST TO MAKE IT SO! SPEC'S SUBJECT TO FINAL INSPECTION.
Buy It Now
Free Shipping Condition: New Location: Santa Fe Springs, United States
Buy It Now
Free Shipping Condition: New Location: Sunnyvale, United States It is designed specifically for Lotos plasma cutter BRWON LTP5000D ,Cannot be used for RED LTP5000D. LotosLTP5000D should use only Lotos Technology factory ... moremanufactured genuine accessories. Total Length 13ft 3in.
Buy It Now
Free Shipping Condition: New Location: Chino, United States This cut inverter is with electric display. The working of plasma cutting With cooling fan. Latest cutter technology with the new lightweight and portable. ... moreMax cutting thickness of this machine is 10mm.
Buy It Now
Free Shipping Condition: New Location: United States PILOT ARC Plasma Cutter Machine 1;. Plasma Cutter THUNDER 55. Non-Touch Pilot Arc. Pilot Arc Ignition effectively cutsrough, painted, and rusty surfaces. ... moreP80 Plasma Torch 1;. Ideal cutting thickness 10 mm ,maximum cut up to 14mm.
Buy It Now
Free Shipping Condition: New Location: United States Upgrade IGBT Technology. 65A Non-touch Plasma Cutter. Using better quality IGBT transistor material, can effectively save 50% energy. Technology：IGBT&Inverter. ... more65Amp Pilot Arc Plasma Cutter Machine - PLC65P.
Buy It Now
Free Shipping Condition: New Location: Baldwin Park, United States Standard Severance Cutting Thickness: 1. Maximum Severance Cutting Thickness: 1.5 in. v APC-80HF incorporates the most advanced IGBT inverter technology ... moreand non- touch pilot arc cutting process es, resulting in excellent arc stability.
Buy It Now
$4.47 Shipping Condition: New Location: Johns Island, United States It uses the IPT-40 head, which is a blow-back start, non-high frequency start, similar to what Hypertherm has done for many years. Stay away from high-frequency ... morestart if you are building a CNC plasma table, because it causes electrical interference that can crash the computer running the CNC.
Buy It Now
Free Shipping Condition: New Location: Hebron, United States scope of delivery 1pcs Power source RBC-6000 1pcs 3m cable +Earth clamp 1pcs gas regulator with 2pcs connector 1pcs 3m Cutting torch and 2pcs torch accessories.
Buy It Now
$12.95 Shipping Condition: New – Open box Location: Clayton, United States THIS IS A COMPLETE CHINESE TORCH HEAD AND HANDLE KIT FOR USE ON THE PT60 AND IPT60, 60 AMP TORCH'S. SORRY FOR ANY INCONVENIENCE THIS WILL CAUSE.
Buy It Now
Free Shipping Condition: New – Open box Location: Pacific, United States Cebora Pocket Plasma 25 Plasma Cutter. used on Cebora®, Snap-On® - Blue Point® many others -. Cebora® YA-2225. Cebora® POCKET PLASMA 25. this torch is ... morefar superior - adds pilot arc, no more push to start, better performance!
Buy It Now
Free Shipping Condition: New Location: United States Style: BTC650DP 7GEN 110/220. Item model number: BTC650DP 7GEN. Style: BTC650DP 7GEN 110/220. [Pilot Arc Function]: BTC650DP 7th plasma cutter has the ... morepilot arc function. It is a high frequency non-touch arc starting mode.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States The new and improved model makes it more convenient and easier to use. Maximum Severance Cutting Thickness: 3/4 in. 30 Amp Digital Air Inverter Plasma ... moreCutter handles cuts up to 1/2". Type:DC Air Plasma Cutter.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States Technology：IGBT&Inverter. The clear operation panel and intuitive data display are convenient for users to operate and greatly improve the user experience. ... moreIGBT technology makes the body light and easy to carry.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Plasma Cutter CNC 50A Non Touch Pilot Arc Low Frequency 110V/220V 1/2" Clean Cut Inverter CNC Cutter. Packing List: 1 X Non-touch plasma cutter (Power ... moreCord 6 ft) 1 X Earth clamp 9.8 ft 1 X IPT60 cutting torch (16 ft) with consumables 1 X 220V to 110V conversion line 0.65 ft 1 X Welding gas hose 12 ft 1 X User guide.
Buy It Now
Condition: Used Location: Brookpark, United States WORKS{BUT} BEING SOLD FOR PARTS OR REPAIR AS IT HAS ANN ISSUE AS STATED IN THE AD.SO ITS BEING SOLD AS- IS WITH NO WARRANTY OR RETURN. THIS IS AN L-TEC ... morePCM-750I PLASMA CUTTER. L-TEC IS A DIVISION OF ESAB, THIS MACHINE WORKS AS SHOWN IN THE VIDEO BELOW, BUT IT WILL CUT FOR ABOUT 30 SECONDS AND STOP BUT AS SOON AS YOU HIT THE TRIGGER AGAIN IT WILL DO THE SAME THING OVER AND OVER,I HAVE NO IDEA WHATS WRONG,COULD BE EASY FIX? THE TORCH AND GROUND ARE IN GREAT SHAPE,THE TORCH IS EITHER A PT-23 OR A PT-27, ITS IN OVERALL DECENT SHAPE COSMETIC WISE BESIDES SOME MINOR MARKS ECT. ITS USED} ITS A 50 AMP MACHINE.SINGLE PHASE 220/230 VOLT. ITS BEING SOLD AS-IS FOR PARTS WITH NO WARRANTY OR RETURN. THE VIDEO IS POOR BUT YOU CAN SEE IT CUTTING A 1/2 PIECE OF STEEL.ITS A POOR CUT AS I WAS TRYING TO VEDEO AND CUT AT THE SAME TIME, SORRY,BUT YOU GET THE POINT,IT CUTS.
Buy It Now
Free Shipping Condition: New Location: Arcadia, United States 60 CONSUMABLES FOR PLASMA CUTTER TORCH of Simadre 50R/RX, 40R, 5000D, 5200DX, 520DX. 20 Electrodes.
Buy It Now
$93.49 Shipping Condition: Used Location: Edmond, United States 5pk Hypertherm Plasma Electrodes These are NEW in original snap-pack. Electrodes from Hypertherm Genuine. Never used or damaged. Made in the USA on 2/04/2013. ... moreSpecifications& Features: Part Type: Electrodes Amperage: 100 Amps Processes: Shielded Unshielded Gouging Torch Type: Handheld or Mechanized PAYMENT& SHIPPING- All bids must be paid within 10 days from the closing of the auction. If the buyer has not paid by that time, and contact has not been made, we will file an unpaid item case. Winning bidder agrees to pay amount listed(USD) to cover shipping and handling. We will ship your item(s) after your payment has been cleared, to a confirmed address. If an item arrives damaged from shipping. Keep everything sent to you, and contact us within 14 days after receiving item and we'll fix it. FEEDBACK& QUESTIONS- We will submit feedback only on those who have filed feedback on us. If you are satisfied with your transaction with us. Please leave your comment and we will be sure to reciprocate, promptly. Please contact us with any questions or concerns before leaving neutral or negative feedback, we will ensure complete customer satisfaction. ` For questions. Alternate payment or shipping methods. Call: 620.757.1333, Tue-Sat: 12PM to 8PM CST-
Buy It Now
Free Shipping Condition: New Location: San Diego, United States IMPORTANT-THESE CONSUMABLES WORK WITH THE REBOOT RBC-5000DL PILOT ARC ONLY. These Consumables DO NOT WORK with the REBOOT RBC-5000D. MPN:RBC-5000DL PILOT ... moreARC.
Buy It Now
Free Shipping Condition: New Location: United States Reboot 2PCS PT-31 Plasma Cutter Roller Guide Wheel Spacer Circle Compass Stand Off Fit For Touch Arc Plasma Cutter Torch CUT35 CUT40 CUT45 CUT60 CUT50D ... moreLGK40 LG40 (not fit ag60 torch）.
Buy It Now
$350.00 Shipping Condition: Used Location: Morganville, United States Used Snap-On Plasma Cutter YA5550. Hardly Used. In great shape. Comes with lead as in picture. Item sold as is where shown.
Buy It Now
Free Shipping Condition: New Location: United States Type:P80 Plasma Cutter. |The plasma cutting gun cutting gauge has a magnetic base, which can be directly connected to the work piece being operated for ... moreeasy operation. Circular radius: 5cm-50cm/1.97" 19.67".
Buy It Now
Free Shipping Condition: New Location: Santa Fe Springs, United States
Buy It Now
Free Shipping Condition: New Location: Woodbridge, United States Welding Steel & Aluminum Cutter Roller Guide Wheel For Plasma P-80 Torch & other. The P-80 high frequency air plasma cutter torch cutting 40mm/1.57in ... morethick plate under the current of 120A. 1 x Torch Roller Guide Wheel.
Buy It Now
$6.00 Shipping Condition: New Location: Archbold, United States 9-6501 Thermal Dynamics drag cut nozzle long tip PCH/M-26/28/35/38 Plasma Cutter Click to Enlarge Click to Enlarge Click to Enlarge This item suit for ... moreThermal Dynamics PCH/M-26/28/35/38. Stal Pak, Pakmaster50 Plasma Cutter This item including following: Nozzle Part No# 9-6501(Thermal Dynamics PCH/M-26/28/35/38 Long Tip Drag cut Nozzle) The price could be cheaper for larger order quantity. Please contact us for further information. Feedback: We are strive to be a 5 star seller. Your feedback is critical to our success on eBay. If you have any problems or concerns whatever with your order or products. Please message us and give us a chance to assist you before you leave any feedback?we believe we can produce a positive outcome to any situation and will work hard to earn your satisfaction. Thank you The parcel to USA will be dispatched by USPS. Othre countries will be shipped by registered air mail post. Usually, the delivery time is around 15-25 business days. If you want express shipping. Please kindly contact us freely. P aypal and Credit Cards Accepted. Any currency is ok as long as accepted by paypal. Calculating the amount just according to the exchange rate of intraday. A non-payment dispute will be opened if full payment is not received after 14 days of auction. inkfrog terapeak. I000000.
Buy It Now
$99.00 Shipping Condition: Used Location: Cocoa, United States BUY FROM A TRUSTED EBAY SELLER! BRAND NEW THERMAL DYNAMICS CUTMASTER 42 PLASMA CUTTER WITH CASE. Thermal Dynamics® Cutmaster® 42 Plasma Cutter ... more1-4200 The Thermal Dynamics® Cutmaster® 42 Plasma Cutter is one of the most affordable. Highest quality 1/4" cutting capacity plasma systems available. The Cutmaster® 42 has the power to cut all day long at its recommended cutting capacity but gives you that extra cutting punch when you need it. The Cutmaster® 42 Plasma Cutter has the unique ability to crank out 27 amps of cutting power on 120 volt input and then jumps all the way up to 40 amps of cutting power when operating on 230 volt input power. Applications Auto Body/ Marine Repair Plumbing& HVAC Home Shop Rental Fleets Metal Building& Roofing Construction Features Industry leading 4-YEAR warranty, The only plasma cutter in its class that provides increased output power when switching from 120 volt to 230 volt input. Competitively priced for the 1/4" 6mm) market. But with the cut capacity of a larger machine. Features the new SL40 torch. Based on the proven Surelok platform. Vent2Shield allows the use of considerably smaller air compressors compared to similar 40 amp plasma cutters. Greater cutting capacity than any 1/4" 6mm) plasma cutter. Cuts all day at 1/4" with the power to cut 5/8" Compact and lightweight. Only 26 lbs. 11.8kg) for serious portability. Only 40 amp unit on the market with quick disconnect torch and lead extensions. Features two power plugs. One for the standard 120 volt outlet and another plug for a 230 volt outlet. Comes complete with Cutmaster® 42 Plasma Cutter All new SL40 torch with 15' leads Safety gloves& glasses Instructional plasma cutting DVD Extra spare parts Heavy-duty carrying case Power plug adapters
Buy It Now
Free Shipping Condition: Used Location: Madison, United States komatsu plasma cutter parts lot. Torch Thermacut Attc Hypertherm.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States Includes: 1 x PTM-60 Machine Torch, with FY0023 Central Connector Installed using Everlast® Pinout - 5m - ~16' long. PTM-60 CNC Machine Torch. For CNC ... morePlasma Cutting. Note: our adapter kit can to enable you to ADAPT THIS TORCH to YOUR machine.
Buy It Now
Free Shipping Condition: New Location: Walton, United States NON-TOUCH PILOT ARC. MAX CUT: 2/3"@110V, 4/5"@220V. POWERFUL CUTTING ABILITY. It makes cutting expanded steel a lot easier and smoother. CLEAN CUT: 1/3"@110V, ... more1/2"@220V. NON HIGH FREQUENCY.
Buy It Now
Free Shipping Condition: New Location: United States Type:P80 Plasma Cutter. The plasma cutting gun cutting gauge has a magnetic base, which can be directly connected to the work piece being operated for ... moreeasy operation. Circular radius: 5cm-50cm/1.97" 19.67".
Buy It Now
Free Shipping Condition: New Location: Baldwin Park, United States It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with ... moresharper cuts. APC-70HF incorporates the most advanced IGBT inverter technology and non- touch pilot arc cutting process es, resulting in excellent arc stability.
Buy It Now
Free Shipping Condition: New Location: Chino, United States The 26pcs PL60 plasma torch accessories kit includes 10 conductive nozzles, 10 electrodes, 3 porcelain nozzles and 3 brackets, easy installation and perfect ... morefit. Porcelain Nozzle: 22 20mm / 0.87 0.79in.
Buy It Now
$57.62 Shipping Condition: Used Location: Topeka, United States This is a used like new Lotus LTP5000D 50 amp plasma cutter. This is a very compact portable unit which makes it very nice to use. Included is everything ... moreyou see pictured with the original box as well.
Buy It Now
Free Shipping Condition: New Location: Walton, United States Up tp 50A output, can handle 1/2" Clean Cut at 220v. Incorporates non-touch pilot arc cutting processes, cutting effect is very ideal and can finish the ... morework regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States APC-70HF incorporates the most advanced IGBT inverter technology and non- touch pilot arc cutting process es, resulting in excellent arc stability. The ... morecutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc.
|
|
|
|
(BARELY-USED) HYPERTHERM POWERMAX 30 HANDHELD PLASMA CUTTER
PRE-OWNED) BARELY- USED) HYPERTHERM POWERMAX 30 HANDHELD PLASMA CUTTER. The Powermax30 does the work of systems twice its size and weight. It efficiently cuts ¼" 6 mm) metal. Applications Hand cutting- Standard system components- Power supply- T30v hand torch- Extra consumables for cutting- Work cable with clamp. 15' 4.5m) Hypertherm carrying strap- CSA units include 240/20 amp plug with adapter plugs for 120 V/15 amp and 240 V/20 amp circuits•Hand cutting- Deluxe system components All standard system components plus: Rugged carrying case- Enhanced consumable kit- Plasma cutting guide- Cutting gloves Capacity Thickness Cut speed Handheld cut Recommended 1/4" 6 mm) 20 ipm(500 mm/min) 3/8"10 mm) 10 ipm(250 mm/min) Severance 1/2" 12 mm) 5 ipm(125 mm/mi Specifications Input Voltages CSA CE 120– 230 V. 1-PH, 50/60 ... moreHz 120– 230 V. 1-PH, 50/60 Hz Input Current@ 2.49 kW CSA CE 120– 230 V. 1-PH, 26– 13.5 A 120– 230 V. 1-PH, 26– 13.5 A Output current 15- 30 A Rated output voltage 83 VDC Duty cycle 40°C(104°F) CSA CE 50% 230 V 35% 120 V 50% 230 V 35% 120 V Open circuit voltage(OCV) 240 VDC Dimensions with handles 14.0" 356 mm) D; 6.6" 168 mm) W; 12.0" 305 mm) H Weight with 15' 4.5 m) torch CSA CE 20 lbs(9.7 kg) 21 lbs(10 kg) Gas Supply Clean. Dry, oil-free air or nitrogen Recommended gas inlet flow rate/ pressure 240 scfh. 4 scfm(113 l/min) 80 psi(5.5 bar) Input power cable length 10' 3 m) Power supply type Inverter- IGBT Engine-driven generator operation Engine Drive Rating(kW) System Output(amps) Performance(arc stretch) 5.5 30 Full 4 25 Limited ITEM WAS TESTED BEFORE LISTING IT& IS IN 100% WORKING CONDITION. THERE WILL BE A NEW YORK STATE SALE TAX RATE OF 8.875% AND IT WILL BE ADDED TO THE FINAL SALE PRICE FOR ANY NEW YORK BUYER. GOOD LUCK BIDDING! WHAT YOU SEE IN PICTURES IS WHAT YOU ARE BIDDING ON. WE PROVIDE CLOSE UP PICTURES ITEMS HAVE: THE FOLLOWING: PLEASE VIEW PICTURES FOR CONDITION OF ITEMS VERY LIGHT WEAR AND TEAR. SCRATCHES. SCUFF MARK'S. ECT
|
|
|
Thermal Dynamics Plasma Cutter Dynamics Cutmaster 39 1-3830
This auction is for. A Thermal Dynamics Plasma Cutter Dynamics Cutmaster 39 1-3830. This is in good pre-owned condition. It is in working condition. It comes as pictured. Process(es) Manual Air Plasma Cutting Industrial Applications HVAC Home Shop Plumbing Auto Body Repair Production Cut 0.25 in. 6mm) Recommended Cut Maximum Cut 0.625 in. 15mm) Maximum Cut Torch Model SL60 Rated Output 30 Amps Output Range 20-30 Amps Output Power 2.8kW Input Volts 115-230V. 1 ph, 50-60Hz Input Amps@ Rated Output 29A@ 115V 16A@ 208V 14A@ 230V Duty Cycle 35% 30A 60% 22A Plasma Gas Air@ 65 psi Gas Flow 5.0 cfm(141 lpm) This is not refurbished or reconditioned. The pictures are of the actual item being sold. Only what is in the pictures are included in the auction. Please look at the pictures as they are a part of the description. I will answer any questions ... moreto the best of my knowledge. IF YOU CHOOSE THE LOCAL PICK UP OPTION PLEASE NOTE YOU MUST HAVE YOUR INVOICE AND ID TO PICK UP. NO EXEPTIONS. If choosing UPS as your shipping option please note that they will not ship to PO Boxes. We Ship Tuesdays and Thursdays Only. If you live in Hawaii or Alaska Please email me for a shipping quote prior to bidding. If you are bidding on a tool with a battery. Please note, we do not guarantee the life of the batteries* They are sold AS-IS also we are not responsible for recalibration of tools. A Note About Shipping: Our shipping rates include more than just postage- We incur other expenses to ensure your order ships safely. Such as all packaging(envelopes, boxes, padding, etc. Insurance, delivery confirmation and printed labels. Shipping Charges& Detailed Seller Ratings: We start MOST of our auctions at.01 and the shipping charges can sometimes be perceived as unreasonable compared to the item cost. PRODUCT DESCRIPTION: This product has been described to the best of our knowledge and in the greatest detail and truthfulness. We have also taken detailed photographs of the actual product being sold. These photographs often
|
|
|
Hobart SMOOTHCUT 2-60A Plasma Cutter
This was a working piece of equipment when removed from my shop. This a heavy duty shop plasma cutter. Comes with air regulator and a couple extra cutter tips. The input voltage ranges from 230 volts to 575 volts 3 phase.There is no reserve.
|
|
|
esab plasma cutter pcm-1125
esab pcm-1125 plasma cutter cuts up to 1.25" very nice works great. 3 phase 575 volt ready to work{RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13fcd4ba8cd-0xf8-
|
|
|
hobart safety board from hobart plasma cutter
This circuit board was from a working hobart plasma cutter!
|
|
|
Ice 250 plasma cutter gun off hobart
Up for auction is a mod used plasma gun from a hobart plasma cutter 25' with four new cutting tips!
|
|
|
ESAB PCM750i Plasma Cutter
ESAB pcm 750i Plasma Cutter. This Plasma Cutter was in good operating condition when removed. It is 3ph and when we moved to our new building we only have single phase. Excellent Plasma cutter. Cuts 1" material and can gouge 1-1/2" Cuts 3/4" fast and clean. Comes with 20' lead and has a aux air filter. Also come with a complete Tip accessory kit. A plug and cord to accomodate your connection will have to be done. We had it hard-wired to keep someone from plugging in a single phase welder. Approximately 80 pounds.
|
|
|
Riland / Luxor Cut-40D Air Inverter Plasma Cutter 110 / 220 VAC FOR PARTS ONLY
For Parts Only. Does not get power. With a little work this can be a great machine. Same as Riland Luxor Cut-40D Cut40D Plasma Cutter 110/ 220 VAC Call if you have any questions. 505-227-3955
|
|
|
Versa-Cut Eastwood Plasma Cutter - 40A
Versa-Cut Eastwood Plasma Cutter- 40A ITEM IS USED! THIS ITEM WAS TESTED AND IS IN GOOD WORKING CONDITION* Comes with everything shown in pictures. PLEASE NOTE: This is a used item and is being sold as found. As is- What you see in the pictures is what you will be receiving. Please read the item description and look at the photos carefully before bidding We will describe the item to the best of our ability. PLEASE ASK QUESTIONS PRIOR TO BIDDING. WE WILL BE MORE THAN HAPPY TO ANSWER QUESTIONS THE BEST WE CAN. Buyer assumes responsibility for all shipping and processing charges. THIS AUCTION IS FOR 1(one) item unless otherwise specified. Delaware Gold& Pawn reserves the right to end any auction at anytime! All of our items will typically ship within 1-2 Business days After payment is confirmed. WE ONLY ACCEPT PAYMENT THROUGH PAYPAL AND ... moreONLY SHIP TO U.S. ADDRESSES Except Hawaii. Alaska and Puerto Rico. Be sure to check out our other items and save us as a favorite seller! Keep an eye on our auctions. You never know what we might have! We are a Pawn Shop and buy most of items from our walk-in customers. We Strive for nothing less than 5 Star FeedBack and 100% satisfied buyers! If for any reason you are not completely satisfied with your purchase before leaving feedback Please contact us with any questions or concearns at 302-384-6734 ask for Chris In Internet dept. We appreciate you looking at our items. Good luck and Happy Bidding.
|
|
|
Dead Space 2 Limited Edition Collectors Mini Plasma Cutter Gun Replica RARE
This listing is for a Dead Space 2 Collectible: Dead Space 2 Limited Edition Collectors Mini Plasma Cutter Gun Replica WORKS GREAT! GREAT CONDITION! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13fd7c5babb-0xf0-
|
|
|
Plasma Cutter Torch 105 Amp 100% 1 plus inch steel thic
Ebay Listing Form- We have 1000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- Plasma Cutter Torch Thermal Dynamics Thermadyne Stak Pak Triple FEATURES: Model# DEMO PM6040/ CM 6030, Manufactured By: Thermodyne Thermal Dynamics, S/N N2295A185102KO, Stack pack with cart, 3X power module, 1X control module, Primary volts 200-460 Phase 1/3 AMPS 1PH 44-19/ 3PH 21-9 per unit, 3 power units add up to 105Amps 100% duty cycle HZ 50/60, Includes torch. MADE IN USA, ~220 lbs. 22 by 31 by 40 inches raw-packed for shipping LTL only will be bigger and heavier. CONDITION: Looks older heavy duty design. supposed to do well over an inch of steel cutting. includes Torch and ground lead. No documentation. No extra consumables. Have not used in a number of years-sold as a parts only unit. WHAT YOU SEE IS WHAT ... moreYOU GET. This item is intended for an expert professional user. Not a weekend hobby user. CA# 6047 NOTES: packing& shipping is very costly. used& parts- don't commit if. understand item condition. you can make an offer. international is super costly& slow. combined shipping. anything electrical-more restrictions. can't schedule shipping without. delivery takes time. query& purchase response time. we make a mistake now& then. LINKS: CAVLON ITEM CATEGORIES: air compressors& parts, fans& blowers, bio energy fuel diesel components, bulk material handling, computer. Network& telecom, construction equipment& tools, electric motors, electronic parts& assemblies, generators& backup power, hardware& fasteners high voltage components, high pressure components, industrial automation components, industrial electrical components, lab& industrial ovens& furnaces, liquid pumps, machine tools, mechanical parts& assemblies, optical parts& assemblies, pneumatics, power supplies, rf radio frequency components, robotics, test and measurement equipment, ultrasonic equipment, vacuum pumps&
|
|
|
POWCON 225 SMC PLASMA CUTTER 230V SINGLE PHASE NO RESV. .99C starting Bid L@@K!!
POWCON 225 SMC PLASMA CUTTER 230V SINGLE PHASE NO RESERVE AUCTION POWCON 225 SMC PLASMA CUTTER 230V SINGLE PHASE The Item turns on however it is not cutting. I dont know the problem and am selling it on a'AS IS" basis. Please bid accordingly. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US ... moreBEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
|
|
|
KOIKE ARONSON IK1200-J PLASMA CUTTER
KOIKE ARONSON IK1200-J PLASMA CUTTER- KOIKE ARONSON IK1200-J PLASMA CUTTER INVENTORY# 5684 MODEL: IK-1200J S/N: 1253202 PDF HERE DESCRIPTION: DESIGNED FOR HIGH PERFORMANCE SHAPE CUTTING FEATURES: DUAL TRACING SYSTEMS LOW/MEDIUM SPEED GAS. MEDIUM/HIGH SPEED GAS AND PLASMA CUTTING SPECIFICATIONS: MINIMUM TORCH SPACING: 2 1/4" MAXIMUM NUMBER OF TORCHES: 4 CUTTING THICKNESS CAPACITY: WITH(1) TORCH: 8" WITH(2) TORCHES: 6" WITH(3) TORCHES: 4" WITH(4) TORCHES: 2" AUTOMATIC LEAD-IN: 8) DIRECTIONS CUTTING SPEEDS: STANDARD: 4 ~ 80 IPM HIGH SPEED: 4 ~ 160 IPM TRACER: STANDARD: HL-90 LINATROL HIGH SPEED: HL-83 LINATROL POWER SOURCE: SINGLE PHASE. 100/115 V, 50/60 Hz MECHANICAL SPECIFICATIONS: WEIGHT: 440 LBS(APPROXIMATE) OVERALL WIDTH: 115" OVERALL HEIGHT: 72" CUTTING LENGTH: 120" TRACING LENGTH: 47 1/4" LOCATED ... moreIN OUR BALTIMORE. MD WAREHOUSE CONTACTING NORMAN MACHINE TOOL. LTD: For immediate response to questions. Please contact us at 1-800-394-4399 during business hours. Weekdays. 9am- 5pm EST) If you contact us by email. Or after business hours, we will answer your questions as soon as possible. NEW MACHINE NOTIFICATION TO PROSPECTIVE BUYERS: Norman Machine Tool. Inc strives to keep listings current for our customers. Manufacturer's specifications and availability are subject to change without notice. Stock photos are to be considered representations only and may show optional accessories, different models, or possible color differences from the actual machine being offered for sale. CONTACT US 1311 South Ponca Street- Baltimore. Maryland 21224. Phone 800-394-4399- Fax 410-633-7737. RETURNS Returns will not be accepted without prior approval. If you need to make a return. Please contact us before you ship the merchandise back so we can issue you a Return Merchandise Authorization(RMA) number. All items are sold with the best intentions and most complete descri
|
|
|
5 HYPERTHERM PLASMA CUTTER 120447 ELECTRODE REPLACEMENT
SquareTrade © AP6.0 NEW IN PACKAGE PACK OF 5 HYPERTHERM PLASMA CUTTER ELECTRODES WE DO NOT KNOW WHAT MODELS IT FITS AND WILL NOT REPLY TO YOU ASKING DO YOUR HOMEWORK- GOOGLE YOUR"MODEL# ELECTRODES" AND COMPARE THE PART#S AS IT MAY FIT SNAP ON AND OTHER BRANDS ALSO ALL SALES FINAL MODEL NUMBER, S) MARKED ON THIS ITEM IS: 120447 DIMENSIONS OF THIS ITEM(IN APPROX INCHES) ARE: 1 1/8" WHAT WAS TESTED ON OR WITH THIS SPECIFIC ITEM: NEW WHAT WE FOUND* GUARANTEED NEW*To assist you the buyer. We often test most items prior to listing as noted above. This is only to guide you as to what we experienced and does not in any way guarantee you will have the same results when used in your situation or with variables at your end. SAFE. HONEST SELLER- SEE OUR HIGH FEEDBACK AND BID WITH CONFIDENCE! PLACE HIGH BID EARLY or buy now(if available) ... moreAS MOST OUTBIDDING IS DONE IN THE LAST MINUTE! SEE OUR OTHER AUCTIONS AND STORE THERE MAY BE MORE OR DEALS YOU DID NOT THINK TO LOOK FOR. QUESTIONS: Ask all questions early as we are sometimes out of town a few days at a time and many weekends. We usually answer emails within a few days. Often the same day, but NOT ALWAYS, so if you are the impatient"instant messaging demanding" type of bidder, please do not bid. SHIPPING POLICY: Click on“shipping and payments tab” on this page and type in your zip code to find shipping cost or options available for this auction. UPS is insured and trackable. If US postal option is listed(small items only) We do NOT offer any insurance option on US postal. SHIPPING CHARGES ARE NOT NEGOTIABLE AFTER YOU BID OR MAKE OFFERS! we generally use only the shipping options shown. Do not bid and then ask us to change the price or method. We do NOT use 3 rd party or bill to account numbers. We do not have access to Fed EX. Combined shipping-large items not offered/ small items 50% off lowest rate for ea additional item won within 1 day or enter qty des
|
|
|
Miller SPECTRUM 2050 PLASMA CUTTER 90377 NICE!!! NO RESERVE!!!
Miller SPECTRUM 2050 PLASMA CUTTER. Works perfectly. Complete and ready to use. No Reserve- High Bidder takes it. Buyer may pick up at our location in Athens. Texas 75751(Where US 175 and Tx Highway 31 cross- about one hour east of Dallas. If shipping is required, we will place it on a pallet and build a box around it for a charge of $50.00. We will load onto your truck or your freight company's truck at no cost. You will be responsible for freight cost. If you need assistance with setting up freight, we will help you.
|
|
|
Miller 907396 Spectrum 875 Plasma Cutter - USED - TESTED - AND WORKS AMAZING!
HELLO AND WELCOME TO ANOTHER GREAT AUCTION FROM MICRON1268 WHAT YOU SEE IS WA\HAT YOU GET PEOPLE. ITEM IS FULLY TESTED AND WORKS GREAT! THE RETAIL ON THIS ITEM IS AROUND $3.000. THIS ITEM IS BARLEY USED. ITS A GREAT MACHINE. THANKS AND GOOD LUCK. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13fe7045c09-0x101-
|
|
|
SOLAR 20 AMP PLASMA CUTTER 208/230 VOLT SOL20-20
SOLAR 20 AMP 208/230 VOLT CUTS UP 1/4 STEEL.FAN COOLED TRIGGER ACTIVATED WITH INSTANT PILOT ARC.EXTRA TIPS VERY LITTLE USE
|
|
|
Precision Master 510 Fabrication Cutter Plasma Cutter
Precision Master 510 Fabrication Cutter Plasma Cutter Plasma Cutter Precision Master 510 Cutting area: 60" X 120" Positioning accuracy: +/ 005 Torch hight control: Hypertherm PAC 188 Sheet/part support: Removable slats; replaceable slats Ventilation: Zoned down draft table with automatic damper control Strength: 1" Pierce strength: 3/8 Volts: 208 Manufacture date: January 1994 Model: PM510 Ser. PM12794 Computer numeric controls CNC Koike Hybrid D11 Parametric Library: 40 Preprogrammed shapes Stand alone capability: Yes Manufacture date: 1994 Hypertherm Hydefinition Plasma Systems HD-1070 Mild steel cut capacity 3/8" Stainless steel cut capacity 1/4" Weldability: ready to weld Procesess gases: 02 air N2 Good operating condition. No known mechanical defects This machine will do a good job in cutting 3/8" material ... moreand an exclent job with 1/4" or less material We are selling this machine because a greater capacity machine was needed and purchased Please look at our links to see this work! Shipping/handling: 3650 Lb 178" X 88" X 74" H We accept Paypal and cashier's check for this item By bidding on this item you agree to complete the transaction within 14 days Item will be made available to the winning bidder after we receive funds. Bidder will be contacted via email soon after auction ends with payment instructions. You May Control Shipping Cost and Schedule Delivery The wining bidder/buyer can sellect their own freight carrier. Arrange and pay for shipping and handling charges. The following basic rules apply. Must give us notification one business day before pick-up and pick-up be arranged during our platform business hours(8:00 am to 4:15 pm) FOB is the seller's dock(Buyer takes responsibility for item once it leaves seller's dock. Within seven business days after the item has been made ready for pick-up. The buyer must pay a carrier and make arrangements to take item off current premises. Many freight companies require items be crated for shipment. Ple
|
|
|
ESAB PT-27 Plasma Torch Cutter Spare Parts Kit - 50 to 70 Amp - 21623
ESAB PT-27 Plasma Torch Cutter Spare Parts Kit- 50 to 70 Amp- 21623 This was purchased at a mechanics estate auction. He had a plasma cutter and this is the spare parts kit for it. The kit appears to be complete but I am not sure if there are any pieces missing from the original kit. The kit retails for $170.00. Check out the pictures. What you see is what you get. Heat Shield(2) 21616 Nozzle. 50-70 Amp(4) 33369 Swirl Baffle(1) 33367 Electrode(3) 33366XL Fuse. 15 Amp, 600 V(1) 952137 Stand-Off Guide(1) 21420 Check out my other listings. Numerous Tools and Misc. will be listed. Thanks for Looking and Good Luck bidding.
|
|
|
Hypertherm Max 43 Plasma Cutter w/ Torch 480v
This plasma cutter is in good shape and has been checked out by out local Airgas tech. Everything works as it should. Please look at the pictures closely. Again this is a 480v machine. I will only ship within the United States. I will do my best to answer any questions.
|
|
|
PLASMA CUTTER WELDER CART DOLLY w/ M-30 COMPRESSED AIR FILTER REGULATOR WATER
This cart was built by previous owner to hold a plasma cutter. Cables, and to house the included M-30 Compressed Air Filter and 68228 1/4" Air Line filter/regulator with gauge. If you have a plamsa cutter this should be great for you. You may also use it as a welder cart. Comes with wheels and everything that yous ee pictured. 10" X 25" top tray Bottom tray is the same but metal plates were welder on to put a wider unit up to 11" Please view pictures. The wheels are perfect. Will Sell to the Highest Bidder Unit will be professionally packaged and shipped Insured. Our#1 concern is that your happy with your purchase. Happy with our service, and happy with ebay in general. If unit is not as mentioned or if its damaged in transit you can send it back for a full hassle free refund. Please do your research and make sure this ... moreitem fits your needs. Our return policy is great. We strive for your positive feedback and 5 star ratings. We simply want your repeated business. All items are sent Insured to guarantee its safe arrival. Unit will ship on the following 1 day after your payment is recieved. We have items ready to ship by the end of auction. We are an e-commerce business. We sell strictly online. We do not offer local pickups. We don't have the proper place of business or the proper insurance requirements to greet our customers. We are registered with paypal and feel its the fastest and safest way to complete the transaction. We've moved over our online sales from amazon.com. We look forward to serving your tool and equipment needs. Any questions please send us a message through ebay or to our email. We respond emails and ebay messages promptly. Thank you. Best of wishes, and good luck bidding! We look forward to your business. Please google model number for manufactures specs and owner testimonials:
|
|
|
Hypertherm Powermax 600 Plasma Cutter Powermax 600 LOCAL PICK-UP ONLY!!
LOCAL PICK UP ONLY. CALL ME WITH ANY QUESTIONS. STUART(909)732-6924
|
|
|
Used Lincoln Python Plasma Cutter
Used Lincoln Python Plasma Cutter Runs and welds. Safe to operate, load-bank tested to determine operational functionality. Production Cutting Capacity 3/4" at 18 IPM Recomended Cutting Capacity 1" at 11 IPM Maximum Cutting Capacity 1 1/4" at 7 IPM Specifications: Rated Output: 80 A at 60% duty cycle. 65 A at 100% duty cycle Pilot Current: 18 A Current Range: 35-85 A Air Pressure Required: 70 PSI Flow Rate: 400 CFH Input Voltage: 208V/230V460V/1/3Ph/50/60Hz Comes with machine torch and Valet-Style Undercarriage Comes with 30 day warranty
|
|
|
Mac Tools 35-240 5/16" Genuine 3/8" Severance, Portable Plasma Cutter - 220V
Mac Tools 35-240 5/16 Genuine 3/8 Severance. Portable Plasma Cutter- 220V Search Mac Tools 35-240 5/16” Genuine 3/8” Severance. Portable Plasma Cutter- 220V Produces a full 28 amps of output power that sever cuts 3/8” mild steel Heavy-duty work clamp with 13 ft. cable assemblies Input Voltage: 230VAC@ 60Hz. Output Voltage: 94 VDC Input Current: 15 Amps. Output Current: 28 Amps O.C. Voltage: 280VAC Air Pressure: 3.5 scfm(95 l/min) Air Supply: 70 PSI(4.8 bar) Duty-Cycle: 40% 40°C Kenda Kontender 700 X 32C 125 PSI Nylon Tires(28-622) Package includes machine with compact cutting torch Used item in good condition. General signs of use. A few holes in rubber covering over cables. Presented as working. Has not been tested by me. See Photos for more details. Please message us with any questions. We Are GreatNetDeals We accept& prefer ... morePaypal. All payments are due within 4 days of end of auction. All items will be shipped the day after payment is made. All items are clearly marked as to the preferred& most reasonable shipping method. Our shipping prices include any handling& packaging charges. If you feel that our shipping is too high. Please do not bid. We only ship to the US. Including Hawaii, Alaska& Puerto Rico at the quoted rate. We will NOT ship internationally. We will package& protect your item well. All of our items will be described to the best of our ability. Our terms are that payment is expected within 4 days. If you purchased an item by mistake, we are always willing to mutually cancel the auction, just please communicate with us. If you are unhappy with your sale. PLEASE contact us, we will make it right! If your package seems to have been damaged in any way during shipping. Please do not open it, just mark it RTS& give back to shipper. PLEASE READ ALL DETAILS OF THE AUCTION We take pride in the items we sell& will handle any issues reasonably& quickly. Most of the items we sell have been previously used& will show wear. We will be as specific as possible when desc
|
|
|
20 AMP MATCO PLASMA CUTTER
20 AMP MATCO PLASMA CUTTER. LIGHT HOME USE! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14006ec2727-0xf4-
|
|
|
Snap On Plasma Cutter 25Amp
Snap On Plasma Cutter. This plasma cutter was purchased brand new and I used it once since I bought it new from Snap On. Specs: Description: 25A Plasma cutter cuts up to 3/8" material thickness. Cuts thin sheet metal up to 100" per minute. Ideal for auto body repair shops. Custom fabrication shops, HVAC work and stainless steel fabrication in hospitals and food processing plants. Includes 12' torch assembly, ground cable ct Specificat Stock# PLASMA25 Name, Plasma Cutter. Standard, $2.425.15 Brand, Snap-on Country Of Origin, Italy. Italian Republic, Description, Standard Plasma Cutter, Dimensions, 13.5" H x 12" W x 19" D, Compressed Air Requirements(min) 88 PSI@ 5 CFM, Cut Thickness(in) 3/8, Power Input Cable Length(ft) 6, Primary Input. A) 20, Primary Input. V) 115VAC 50/60 Hz, Duty Cycle@ max Amperage, 20% Ground ... moreCable Length(ft) 12, Output Amperage Max(amps) 25, Sever Thickness(in) Shipping Weight. Lbs. kg) 55(24.9) Torch Cable Length(ft) 12, Warranty, 2 Years from purchase date. Warranty has 4 months remaining
|
|
|
Snap_On plasma 301 Plasma Cutter
Click thumbs to Enlarge Any additional photos will be below This S nap_On plasma 301 Plasma Cutter is used and in good condition. Please see pictures. Pictures shown are of the actual item(s) you are bidding on. This auction includes only what you see pictured. Auction includes: Everything you See Nothing Else SKU: 7/21a34234-234-321450-TH Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days or we will file a non paying bidder report and the item will be relisted. Please note. If you enter the wrong billing address your card will be declined. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. We Ship ... moreto the Continental US ONLY! Please contact us on APO/FPO Shipping. These will cost more. We no longer ship to Hawaii. We Ship to confirmed Paypal and Billing addresses Only! Shipping Carriers: UPS& USPS 1-6 Day. Local Pickups: We offer local pickups but please contact us for details. We offer a 14 Day Money Back Guarantee unless noted"As Is" We do our very best to accurately describe our items. However If you have any problems please contact us within 14 days of delivery. Operating Hours: M-F 9:30am- 5:30PM Central Standard Time Is there a Buyitnow? We do not offer Buyitnows. Will you ship to this country or this country? We ship to the US only. What is the history of the item? Most of our items are used and we do not know the history. We test them and picture their current condition. What's Included? 99% of the time If it's pictured it's included. Please also read"Auction Includes" Inkfrog terapeak. I000000. InkFrog Analytics.
|
|
|
Miller Spectrum 3080 plasma cutter 80 amp w/ autolink 1 and 3 phase 230/460 volt
CREDIT CARD PAYMENT OVER THE PHONE OR PAYMENT IN PERSON AT TIME OF PICK UP ARE THE ONLY FORMS OF PAYMENT ACCEPTED ON THIS ITEM. THAT IS OUR POLICY ON ITEMS OVER $500 Selling a Miller Spectrum 3080 plasma cutter. It includes the gun. Ground clamp, power cord, a few cups, and extra tips. It is equipped with auto link so it will hook to either single or three phase 230 or 460 power with no changes made by the installer. Standard flat rate 100 dollar shipping through ups. Look at the pictures for exact amperage and setting specifications. FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. CREDIT CARD IS THE ONLY METHOD OF PAYMENT. WE CAN TAKE A CREDIT CARD OVER THE PHONE. PLEASE FEEL FREE TO CALL ... moreUS AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1400fd2e84e-0xfb-
|
|
|
HARBOR FREIGHT DIGITAL PLASMA CUTTER 40 AMP 230VOLT ITEM 95136 90 DAY WARRANTY
MAY HAVE MINER NICK'S AND SCRATCH'S THESE ARE STOCK PICTURES I STAND BEHIND THE ITEMS I SELL WITH PRIDE AS A HARD WORKING AMERICAN PLEASE LEAVE POSITIVE 5 STAR FEEDBACK I WORK VERY HARD TO KEEP MY FEEDBACK RATING PLEASE CONTACT ME IF THERE IS A PROBLEM BEFORE LEAVEING FEEDBACK. THANK YOU, To learn more about this and other items I have for sale on ebay or for customer service go to georgesplasmacuttershop.com
|
|
|
ESAB PCM 150 Plasma cutter 150 Amp
ESAB PCM 150 with PT20AM Torch. 25 ft Leads. Less than 100 Hours. Normal Shop dust and wear. Very good condition!
|
|
|
ESAB ESP 100 Plasma cutter 100 Amp
ESAB ESP100i with PT121 Hand Torch. 25 foot cable. Never used! ARC struck for testing only! Excellent condition! This power source had some minor shipping damage. The damaged chassis components were replaced with ESAB oem parts.
|
|
|
USED MILLER SPECTRUM 300 CUTMATE PLASMA CUTTER 115/230V AMP 33.6 KW 3.1 PHASE 1
PRE-OWNED) USED) DON'T MISS OUT* USED) MILLER SPECTRUM 300 CUTMATE PLASMA CUTTER 115/230V, AMP 33. 6, KW 3.1, PHASE 1. DON'T MISS OUT* PRE-OWNED) USED) ITEM WAS TESTED BEFORE LISTING IT& IS IN 100% WORKING CONDITION. WE PROVIDE CLOSE UP PICTURES ITEMS HAVE: THE FOLLOWING: PLEASE VIEW PICTURES FOR CONDITION OF ITEMS PLEASE LOOK AT PICTURES#11 AND#12 FOR SPLITS ON OUTSIDE OF RUBBER ON GUN HOLES. WEAR AND TEAR. SCRATCHES. SCUFF MARK'S. ECT ON ITEM FROM NORMAL USE AND WILL NOT EFFECT PERFORMANCE AND IS FULLY FUNCTIONS AS INTENDED. THERE WILL BE A NEW YORK STATE SALE TAX RATE OF 8.875% AND IT WILL BE ADDED TO THE FINAL SALE PRICE. GOOD LUCK BIDDING! WHAT YOU SEE IN PICTURES IS WHAT YOU ARE BIDDING ON. WE PROVIDE CLOSE UP PICTURES IT IS YOUR RESPONSIBILITY AS A BUYER TO VIEW ALL THE PICTURES BEFORE BIDDING. PICTURES SPEAKS LOUDER ... moreTHAN WORDS. PLEASE LOOK AT MY OTHER ITEMS SHOWING RIGHT NOW ON eBay. Any questions? Please feel free to email me or call me at 347-624-3796 Robert
|
|
|
CENTURY PLASMA CUTTER
in titles& description Name: CENTURY PLASMA CUTTER, Ticket# 15206, Model: 118-009, Manufacturer: CENTURY, Item located at: Morrisville. PA, Condition: Used, Terms& Condition: As is where is, Selling Price: $450.00 Description: Century Plasma Cutter 60Hz Model 116-009 Part No. 82020 208/230 volts with 100% to 20% duty cycle Fan cooled transformer Uses clean. Dry compressed air for both cutting and cooling Built-in 0 to 100 PSI air pressure regulator. Top mounted 20 amp plasma cutter cuts thin sheet metal up to 1/4 inch Ticket# 15206• PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION Subject To Prior Sale | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• ... moreFax: 215-428-9008.
|
|
|
MILLER SPECTRUM 625 EXTREME 20 FT XT40 PLASMA CUTTER
UP FOR AUCTION IS THIS PREVIOUSLY OWNED MILLER PLASMA CUTTER. THIS IS IN VERY GOOD CONDITION. LIMITED USAGE. COMES COMPLETE WITH CARRYING CASE AND ORIGINAL INSTRUCTION MANUAL. THIS IS THE SPECTRUM 625 XTREME. PLEASE SEE PICTURES ABOVE AS REFERENCE. PLEASE SEE BELOW FOR PRODUCT INFORMATION. THIS WILL SHIP VIA PARCEL SELECT WITH INSURANCE THROUGH USPS. Rated Output 40A at 140 VDC. 27A at 91 VDC, 20A at 88 VDC, Input Voltage 240V(10A) 120V(20A) 120V(15A) Input(Amps) 27, 26, 18, Duty Cycle 50 Percent, 20 Percent, 35 Percent, Cutting Capacity(In. 5/8 at 13 IPM 40A 240V) 3/8 at 15 IPM(27A 120V) PSI 6 SCFM at 90 PSI MIN to 120 PSI MAX, Metal Cutting for Maintenance, Light Construction, Prototyping, Body Shops and Metal Fabrication, Inverter, Cable Length(Ft. 12, Overall Height(In. 9 5 DAY MONEY BACK GUARANTEE IF YOU ARE NOT SATISFIED FOR ANY REASON. ... moreRETURN FOR A FULL REFUND WITHIN 5 DAYS OF RECEIVING ITEM.I ALWAYS TRY TO SATISFY THE CUSTOMER!PLEASE USE CONTACT SELLER BUTTON FOR ANY QUESTIONS YOU MAY HAVE. THANK YOU AND HAPPY BIDDING!PLEASE PAY ALL INVOICES WITHIN 4 DAYS OF ANY ENDED ITEM IN YOUR INVOICE. I WILL NOT COMBINE ANY INVOICES EXCEEDING A 3 DAY PERIOD.ANY DISCOUNT IS VOID AND WILL BE REMOVED IF ANY INVOICE IS UNPAID AFTER 3 DAYS. THIS DOES NOT INCLUDE THE TIME IT TAKES FOR E-CHECKS TO CLEAR) Please checkout our feedback at our other parent store fastcashpawn70065. Please do not bid if you have negative feedback rating or no intention of paying.You can contact us 985-359-3278 with any questions or concerns. LOCAL PICKUP IS ALWAYS WELCOME. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1401d592347-0xfb-
|
|
|
Koike SG IV Plasma Cutter
1997 Plasma cutter from Koike. Model: SG IV Dust Hog Systems attached.
|
|
|
THERMAL ARC PAC 5XR PLASMA CUTTER LOT 215
THERMAL ARC PAC 5XR PLASMA CUTTER LOT 215 This unit is designed to cut up to 1" thick. 3PHS 460V. Taken out of a working environment. Thanks for looking.
|
|
|
UNION CARBIDE PLASMARC PLASMA CUTTER PCM-100
THIS IS A UNION CARBIDE PLASMARC PLASMA CUTTER PCM-100 GOOD CONDITION COMES AS SHOWN. X. Shipping on this item is 400.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out ... morewithin 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item.
|
|
|
ESAB PCM-1000i Plasma Cutter, PCM 1000
ESAB PCM-1000i Plasma Cutter. PCM 1000 I received this plasma cutter in a excess sale. It was listed as condition code 7. Which is described as"Property which is unusable in its current condition but can be economically repaired" It was listed in this condition because the end of the power cable was removed(I don't know why) it can be easily replaced(see pictures) I have no way to replace the end of the cable so this plasma cutter is being sold"as-is" Overall it is in good condition. It has scratches due to normal use on a job site, the people from the excess sell did write some of the excess information on it with a black marker. It is also missing a wheel(see bottom) they can all be taken off or it can be replaced. Please contact me with any questions or requests for additional pictures. Thank you for checking out ... morethis listing. Please feel free to contact us for additional information! All of my items come from a smoke-free environment. Don’t wait to buy! All items are available for local sale; listing will be canceled if item sells locally. Inventory(1000i) Payment& Shipping Information We accept PayPal payments and will only ship to your eBay provided address! Multiple purchases(made same day) will be combined as much as possible to reduce shipping cost. Any combined savings(excluding items with free shipping) will be passed on to the buyer and refunded through PayPal. Best offer or auction payments must be received within 36 hours of winning notification. International Bidders(Outside USA) Sorry. We do not sell or ship outside the USA or to an APO/FPO address requiring a customs form. Feedback Positive Feedback will be provided with the completion of a successful transaction! Thank you for your business! Powered by The free listing tool. List your items fast and easy and manage your active items. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-140298c2ee6-0x107-
|
|
|
PLASMA WELDER METAL CUTTER WESTERN WALL ART BUFFALO BISON HOME DECOR
Metal Western wall art featuring buffalo. Made with plasma welder cutter. Well made, with 3 hangers. Colorful pattern, glossy finish, smooth edges. It measures 30 x 8"
|
|
|
Hobart Industrial Plasma Cutter
3 Phase 220- 575 volts Industrial Plasma Cutter
|
|
|
Dead Space 2 Mini Plasma Cutter Gun Replica Limited Edition PS3 XBOX 360 WII
DEAD SPACE 2 MINI PLASMA CUTTER Year: 2010 Condition: Mint. Works Perfect*Please inquire about International shipping Item will be shipped FLAT with a tracking number and full insurance. Payment must be made within 24 hours. Paypal is the only method of payment. No refunds. Please feel free to email me if you have any questions. Good luck! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14031c6a978-0x100-
|
|
|
THERMAL DYNAMICS PAC MASTER 25 PLASMA CUTTING SYSTEM CUTTER AS IS Demo PM25 CUT
Item came from a local surplus auction. All cables in front including power cable are cut off. I cannot test it. Sold AS-IS as a parts unit. Comes as shown in the picture. AS-IS item. No returns, no refunds. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-140372b987f-0xf9-
|
|
|
Everlast PowerPro 256 250a TIG Stick Pulse 60a Plasma Cutter Multi Process Welde
Everlast PowerPro 256 250a TIG Stick Pulse 60a Plasma Cutter Multi Process Welde Lightly used! In very good looking and working condition. Everlast PowerPro 256 250a TIG Stick Pulse 60a Plasma Cutter Multi Process Welder Good duty cycle at rated amperages for TIG/Stick/Plasma. Over Current indicator warns when duty cycle has been exceeded and interrupts welding/cutting OK to cut indicator lights up when minimum air pressure is present. Clean and smooth plasma cuts on virtually any metal. Weld almost any metal. Renown arc stability for TIG/Stick functions 250 A TIG/ 200 Stick welder Instant Paypal payment is the preferred method of payment. Sales tax is charged for Illinois shipments and local pickups only. We reserve the right to refund any payments that Paypal deems as possible fraud or if the amount is incorrect. To avoid initiating an ... moreunpaid item claim. Please pay within 4 days Majority of our merchandise is shipped via UPS or USPS within one to three business days after clear payment received. Shipping time during holidays may take longer than normal We only ship the item to the Paypal Verified address that is sent to us at the time of checkout. Please verify the correct shipping address in your PayPal account before making your payment. Currently. We do not ship to APO/FPO/PO Boxes. If you live outside the continental United States(including PR,Alaska& Hawaii) please contact us in advance to confirm accurate shipping costs.On some orders signature Confirmation may be required. Return Policy: If you need to return an unwanted item please contact us first for authorization and return shipping instructions.If the item is defective buyer will receive full refund.Including shipping cost.On unwanted items return shipping cost is the buyer's responsibility and item must be received back within 14 days of receipt.Item must be returned in the original condition including all containers and accessories.All unwanted items will be charged shipping and 5%restocking fee. We are a small. Family owned and operated b
|
|
|
Simadre Techs Cut50R Cut 50R 50AMP Plasma Cutter Portable
Simadre Techs Cut50R Cut 50 R 50AMP Plasma Cutter Portable Used in good overall condition. Unit has the plug removed from the cord. Please look at photos. PLEASE READ BELOW BEFORE YOU PURCHASE We do not use stock pictures in our listings. You are purchasing ONLY what you see pictured. Nothing more, nothing less. We do our best to ensure customer satisfaction with all of our transactions and conduct our business with the highest integrity. If a problem arises with your transaction. Please give us the opportunity to rectify the situation BEFORE leaving negative or neutral feedback. E-Bay judges sellers heavily on the DSR Rating System. If you do not feel justified to leave 4 or 5 stars in EVERY category, please let us know first so that we can fix the problem. Payment: We accept PayPal only. We do charge Florida sales tax. State taxes will ... morebe calculated at checkout. Shipping: Our normal shipping days are Monday– Thursday. We only ship to the verified address given in PayPal payment. Please make sure payment address in PayPal is correct. If you wish to have your item shipped to a different address you will need to first change your address in PayPal before purchasing. Customer Service: Our customer support is available 8:30AM- 4:30PM Monday- Friday CST. Please contact us thru eBay messages. Please note that you will not receive a response after business hours or over the weekend. International Buyers: We welcome international bidders. Please e-mail for shipping quote before bidding or purchasing. Thank you so much for your purchase! We appreciate your business! gsrx_vers_525(GS 6.6.5(525)
|
|
|
C&G Systems Challenger Industrial Plasma Cutter w/Burny 5 Control - Parts/Repair
SKU: SCL639841 A: 0015000000OIwCR O: 0065000000Mjx82 PA: 0015000000GcAPi View Photo Gallery. Request Freight Estimate. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a C&G Systems Challenger Plasma Cutter w/Burny 5 Control in Parts/Repair condition. This unit is being dispersed as part of a standard fleet rotation from the Seattle City Light. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: C&G Systems ... moreModel: Challenger Serial Number: G715 Transport Weight: approx. 6.000 lbs. Dimensions: L 257" x W 73" x H 75" Features: Up Draft Table Automatic Torch Height Control System Specifications: CNC Controls: Cleveland Motion Controls Model: Burny 5 Type: MM5E-11200-4 Gas Control Module: Thermal Dynamics Model: Merlin GCM-6000 Remote Power Supply Control: Thermal Dynamics Model: STAK PAK RC6010 DEMO Resources: For more information on this unit including full specifications. Visit the manufacturer’s website Condition: Unknown- unit has clear physical damage(see photos) Remote power supply unit is resting on the x-y axis motor Untested by bidadoo When bidding. Please consider this item to be for parts or repair only Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications
|
|
|
LINCOLN PRO-CUT 60 SINGLE PHASE PLASMA CUTTER W/25' TORCH-UNDERCARRIAGE-FILTER
This is a great machine and honestly only used once! Feel free to call with any questions 814-866-2221 ask for Jeff or Ray or email me. Thanks Jeff
|
|
|
Hypertherm Max100D Plasma Arc Cutter Cutting System w/ Hose and Gun MAX 100 D
Up for Bid is a Hypertherm Max100D Plasma Arc Cutter Cutting System w/ Hose and Gun! This is a 240v/ 3 Phase machine This plasma cutter is in good overall condition. With marks and other normal signs of use. Please take a loot at the pictures for more details. It was put in storage a couple years ago and hasn't been used since. But it was working perfectly the last time it was used, so I will provide a 14-day money back guarantee. In the last picture. You will see some boxes with a bunch of extra torch heads, fuses and other accessories. I can ship this to a Commercial address with forklift or loading dock for $190. If you need liftgate delivery. It will cost $30 extra. If you want it shipped to a Residential address, please contact me* Key Features: Fitted with Machine Torch Dual Gases or Air 32mm Severance Cut Recommended Production ... moreCut 16mm 30 to 100 amps 80% Duty at 100 amps Gouging 6.8kg per hour Hypertherm’s MAX100D is a dual-gas system designed for cutting most metals from gauge to 32 mm thick. In addition to hand cutting. It can be used with a machine torch and a THC-2 Torch Height Control system for highspeed mechanized cutting. The MAX100D provides continuously variable current output from 30 to 100 Amps for optimum performance on all thicknesses of metal up to 32 mm thick. This allows the operator wide variations in cutting speeds on the same thickness of metal. Two nozzle sizes(60-Amp and 100-Amp) provide high-quality cuts throughout its range of cut thicknesses. The system can also provide a continuous pilot arc which allows high-quality cutting of perforated or expanded metal without any appreciable deterioration in parts life. This feature is only available for use with the 60-Amp nozzle. The unique MAX100D power supply design uses transistor technology to produce a very smooth constant current DC output. Air can be used as the primary plasma gas. Providing low operating costs combined with high-speed performance. Cylinder air or shop air is acceptable as long as it is free of moisture, oil,
|
|
|
ESAB PCM 875 Plasma cutter USED FREE SHIPPING LOOK !!!!!!!!
HELLO ALL PLEASE READ AND THOROUGHLY UNDERSTAND BEFORE BIDDING. IF YOU HAVE QUESTIONS PLEASE FEEL FREE TO ASK ME PRIOR TO BIDDING What I have for Auction is an ESAB PCM 875 Plasma Cutter that has been sitting on a shelf for the last 5 years. It was removed from service upon the arrival of a CNC Plasma cutter, and according to our Maintenance Department, when this unit was"Moth Balled" it was in Working condition. This item has been used. It is in no way a new unit, it has received its fair share of scratches, dents and dings and some slight overspray from a leak in our airless paint sprayer, but again according to Maintenance was working so the cosmetics have no adverse effects on its performance. Unfortunately I have no way of testing this unit to ascertain its"Working Condition" as this will be an"As Is" Auction, ... moreBUT I will say I was one of the last people to use this Plasma before it was removed from service at work and it was working then It comes with a Working lead with Gun. The lead itself is about 20 feet long and has a small knick in the cable covering but in no way interferes with its performance. It also come with a 20 foot Grounding cable. The Ground Clamp was removed because it was worn out and would not hold to a project. The Power Cable is also included and it measures about 10 feet or better in length. However has no"Plug In" as it was hard wired into our power source at the plant. The Internals of this Machine have been Cleaned. Inspected and Given the Ok for Use. Lastly I have also acquired a COPY of the Users Manual of this specific machine. It is not a general generic manual as I have seen on other auctions. Due to the Nature of this Equipment and all Equipment I sell that is not New. This is an AS IS Auction, NO Warranty(s) are expressed or implied, No Refunds, No Returns, No Exceptions. I have done my best to describe what is up for Auction, if you have any questions please feel free to ask me, I will try and answer any and all questions as quickly as
|
|
|
Hypertherm Powermax 30 Plasma Cutter Great Condition Used Twice
Like new HYPERTHERM POWERMAX 30. This unit used only twice for short cuts. Everything that comes with original kit included carrying strap, some expendables, manuals, CD, dual voltage pigtail for 120/240 Super nice cutter. That is Like New Bid with confidence. Thanks Posted with
|
|
|
Hypertherm Max100 Plasma Arc Cutter Cutting System w/ Hose and Gun MAX100
This sale is for(1) Hypertherm Plasma Cutting System. Model MAX100. It comes with the machine. The cord, and the gun. It has been used in our Anderson, SC shop where it is currently located. Local pick-up is preferred but we will ship if needed.
|
|
|
BUG-O 6150 PROGRAMMABLE PLASMA CUTTER BURNING TABLE SHAPE CUTTING MACHINE
BUG-O 6150 PROGRAMMABLE PLASMA CUTTER BURNING TABLE SHAPE CUTTING MACHINE Includes: Bug-O 6150 Programmable Plasma Cutter Shape Cutting Machine Thermal Dynamics PakMaster 100XL Plasma Cutter w/ Machine Torch(S/N: 022929A191301D; Input: 208-460V. 1/3 PH, 72-38A(1 PH) 36-20A(3PH) 15-90A adjustable output) Machine Plasma Torch Burning Table in Plasma Cabinet Prewired 440V Distribution Boxes Dayton 6" Bench Grinder SECOND PLASMA CUTTER(SHOWN IN PICTURE) IS AVAILABLE FOR OPTIONAL FEE AND INCLUDES HAND PLASMA TORCH WITH OFFSET WH Features The Bug-O 6150 Shape Machine is an easy to use 2-axis machine which you can program to run any contour or pattern for both welding or cutting applications. A handheld terminal supplied with the machine is used to program the required shape and operation sequence. Other functions besides moves can be programmed. ... moreSuch as repeats, starts, stops, delays, and rapid traverse. 10 programs can be stored in machine memory at any one time. An optional computer software program is available(through Bug-O) For any IBM compatible computer. With this program you can select pre-programmed shapes or create your own custom shapes, and store any number of them on disk. Selected shapes can then be downloaded to the machine as needed. The Programmable Shape Machine is compact and lightweight and can be easily carried throughout your facility. It is held in position with either powerful permanent magnets or vacuum cups. Depending on the work material. This enables you to take the machine to the work, which will help reduce your material handling. The Programmable Shape Machine is a two-axis machine that runs on a track and carries a torch on a motorized cross-arm. It can be used for flame or plasma cutting. Or welding, of a variety of shapes which are programmed and stored in memory. The machine has storage capacity in memory for 10 different programmed shapes. At any time, one of these shape numbers is selected to be active, and will stay selected even when the power is shut off, and turned back
|
|
|
Thermal Dynamics Pak-5XR Plasma Cutter Instruction Service Parts Manual 0-2052
As title states. This is one of the many manuals that I used during my years as a certified welding machine repair technician in the 1990's& 2000's. This manual. As well as the others I have listed, was used regularly, so they WILL MORE THAN LIKELY HAVE SIGNS OF USE. By USE, I mean in the form of minor stains, page tears and possibly notations that I may have made in them throughout the years(voltage readings, parts annotations, etc) But ALL of my manuals are still readable and will without a doubt serve their purpose. Many of the manuals have schematics or wiring diagrams in them as well as parts breakdowns. These manuals were ordered direct from the factory and are 100% complete. If you have any questions about any of the manuals I have listed, feel free to contact me with the machine make/model you are interested in as well ... moreas the listing title. I have more manuals that I will be listing as I have time in hopes someone may can find a use for them. Thanks for your time. Shipping: USPS"snail mail" will be used unless you request otherwise. If you need it faster. Ask for a express mail quote. It would be a good idea for you to ask for quote if outside the lower 48. Posted with
|
|
|
Thermal Dynamics Cutmaster 42 Plasma Cutter + $100 in consumables
Used for two weeks. Has probably 20-25 hours total usage on it. We used this plasma cutter while our other plasma cutter was being warrantied. This plasma cutter also comes with $100 in consumables along with all the original packaging including carrying case and protective glasses. We paid over $1100 for this thing brand new. Still have the original receipt if you want it. The manufacturer information is below. Thermal Dynamics® Cutmaster® 42 Plasma Cutter 1-4200 The Thermal Dynamics® Cutmaster® 42 Plasma Cutter is one of the most affordable. Highest quality 1/4" cutting capacity plasma systems available. The Cutmaster® 42 has the power to cut all day long at its recommended cutting capacity but gives you that extra cutting punch when you need it. The Cutmaster® 42 Plasma Cutter has the unique ability to ... morecrank out 27 amps of cutting power on 120 volt input and then jumps all the way up to 40 amps of cutting power when operating on 230 volt input power. Applications Auto Body/ Marine Repair Plumbing& HVAC Home Shop Rental Fleets Metal Building& Roofing Construction Features Industry leading 4-YEAR warranty The only plasma cutter in its class that provides increased output power when switching from 120 volt to 230 volt input. Competitively priced for the 1/4" 6mm) market. But with the cut capacity of a larger machine. Features the new SL40 torch. Based on the proven Surelok platform. Vent2Shield allows the use of considerably smaller air compressors compared to similar 40 amp plasma cutters. Greater cutting capacity than any 1/4" 6mm) plasma cutter. Cuts all day at 1/4" with the power to cut 5/8" Compact and lightweight. Only 26 lbs. 11.8kg) for serious portability. Only 40 amp unit on the market with quick disconnect torch and lead extensions. Features two power plugs. One for the standard 120 volt outlet and another plug for a 230 volt outlet. Specs
|
|
|
Air valves for Century Plasma Cutter 118016
Air Valves for Century 50 amp plasma. Working condition.
|
|
|
Lincoln Pro Cut 55 Plasma Cutter on Roller Cart
Lincoln Pro Cut 55 Plasma Cutter with optional roller cart. Machine is like new. Less than 1 hour of operation on it. New price was $3400. Features: 60 amps of power for world class performance up to 3/4" 19.0 mm) in only a 55 lb. 25 kg) package. Patented PCT 80 torch and VORTECHT technology consumables for excellent cutting speed and performance. Dual winding technology for fast arc transfers. And improved cut quality. Can be powered by most Lincoln engine driven welders for ultimate portability. Back-lit LED system for status indicators eliminates confusion yet conveys all the information necessary to monitor the power source readiness. Parts-in-Place safety indicator and lockout circuit to protect both the operator and the system. Quick disconnect torch for fast and easy torch removal. Valet Style" undercarriage available for ... moreeasy transport around the shop or site. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-14084f02153-0xf5-
|
|
|
Miller SPECTRUM 2050 PLASMA CUTTER NICE!!! NO RESERVE!!! SAVE $$$$
Miller SPECTRUM 2050 PLASMA CUTTER NICE! NO RESERVE! SAVE $$$$ YOU CAN LOCAL PICK IT UP. OR WE WILL SHIP VIA UPS GROUND. SHIPPING CHARGES ARE ABOVE IN THE LISTING. This is a preowned in a nice working condition miller 2050 Plasma cutter. Comes with the Both Leads and power cable(attached to it) Shows markings. Scuffs, and signs of use. Rubbings on the cables. Actual item in the pictures please view the pictures and see how you like it No other item-or accessories included in this sale
|
|
|
HOBART AIRFORCE 250A PLASMA CUTTER - 500437 As Is Works But Cuts Out
For sale is a Hobart Airforce 250a plasma cutter. The unit has been tested and has some issues so it is being sold as is for repair. The unit powers on fine and starts to cut but then the unit and air shut off after a few seconds. If you release the trigger and start again it runs for a few more seconds again. I'm not very familiar with these so it may be a simple solution. I've searched online and this is a fairly common problem with plasma cutters. I tried a few quick fixes but didn't get any to last. For a while it seemed to but cutting well but I let it sit a couple weeks and tried it again and it just runs for the few seconds. May be a simple solution or may require parts. The solutions suggested online were simple. The tip is used and I don't have any replacements. Some suggestions online for possible problem included ... morenot being grounded properly. Tip on too tight, and air in line. I just tried these fixes quick but didn't do any extensive work so it may be one of these issues. This unit has previously been reconditioned. Unit has some marks from use but cosmetically is in good condition. There is some exposed wire on the ground unit so it could even be something as simple as to do with the ground. Unit is heavy and will be shipped double boxed to prevent damage. Signature may be required depending on how much it sells for.
|
|
|
HYPERTHERM PLASMA CUTTER MACHINE TORCH FITS POWERMAX 1000 & 1250 etc.
Hypertherm machine torch for plasma cutter. Fits powermax 1000& 1250
|
|
|
LIKE BRAND NEW Hypertherm Powermax 45 Plasma Cutter PN: 088013 USED ONCE
Hypertherm Powermax 45 Plasma Cutter PN: 088013 Small size and light weight provide unmatched portability among 1/2" 12 mm) machines. Conical Flow™ increases arc energy density for superior cut quality with little dross. Pattened drag-cutting technology makes it easy to use- even for first-time operators. Boost Conditioner™ compensates for input voltage variations on 200- 240 V lines. Providing improved performance on low-line voltage, on motor generators and on fluctuating input power. CNC interface and FastConnect™ torch connection increase versatility for handheld and mechanized usage. Dual-angle design extends nozzle life and lowers operating cost. Powercool™ design cools internal components more effectively for greater system reliability and improved uptime. Standard system components Power supply T45v hand torch Extra consumables ... morefor cutting and gouging Work cable with clamp. 20' 6 m) Carry strap, Input Voltages(± 10% CSA 200– 240 V. 1-PH, 50-60 Hz Input Current@5.95 kW CSA 200/230 V. 1-PH, 34/28 A 230 V. 1-PH, 30 A Output current 20- 45 A Rated output voltage 132 VDC Duty cycle@ 40°C(104°F) CSA 50% 45 A. 200– 240 V, 1-PH 60% 41 A. 200– 240 V, 1-PH 100% 32 A. 200– 240 V, 1-PH Open circuit voltage(OCV) 275 VDC Dimensions with handles 16.75" 426 mm) D; 6.75" 172 mm) W; 13.7" 348 mm) H Weight with 20' 6.1 m) torch CSA 37 lbs(17 kg) Gas Supply Clean. Dry, oil-free air or nitrogen Recommended gas inlet flow rate/ pressure Cutting: 360 scfh; 6 cfm(170 l/min) 80 psi(5.5 bar) Gouging: 360 scfh; 6 cfm(170 l/min) 60 psi(4.1 bar) Input power cable length 10' 3 m) Power supply type Inverter- IGBT Engine-driven generator operation Engine Drive Rating(kW) System Output(amps) Performance(arc stretch) 8 45 Full 6 45 Limited 6 30 Full Cut Chart Material Thickness Current Maximum cut speed* inches mm amps ipm mm/min Mild Steel 10 GA 1/4 3/8 1/2 3/4 1 3 6 10 12 19 25 45 45 45 45 45 45 175 75 40 25 10 5 4445 1905 1016 635 254 127 Stainless Steel 10 GA 1/4 3/8 1/2 3/4 3 6 10 12 19
|
|
|
Esab L Tec PT-17A Plasma Cutter Cutting Plasmarc Torch 50' ft Lead 100 AMP Rails
ESAB L-Tec PT-17A Plasma Cutting Torch Excellent cutting capability–cuts up to 1 1/4 in. 31.75 mm) severs up to 1 1/2 in. 38.1 mm) pierces up to 1/2 in. 12.7 mm) Produce clean. High quality cuts Patented safety circuit for enhanced operator safety Operate with shop or cylinder air Compact. Lightweight design for ease of handling Long life electrodes lower operating costs Pilot arc starting–even starts on paint Gouging nozzles available Intermittent cutting capability for grate or expanded metal applications Standard and drag shield guards available for operator convenience, This is an Esab L Tec plasma cutting torch with a 50 foot lead. It has a track installed on it for stable smooth cuts adaptable to your existing system. The specially angled head is perfect for ultra clean cuts. This is the perfect torch for mechanics. Machinists, construction ... moreworkers, metal fabricators, and anyone who works with metal in general. THIS IS A NO RESERVE AUCTION. WE START OUR ITEMS LOW BECAUSE THIS IS AN AUCTION. WE WANT YOU TO BE EXCITED TO GET THIS ITEM AT A GREAT PRICE. BICTION WILL NOT ENTERTAIN BEST OFFER OPTIONS. IF YOU WANT THE PRODUCT. PLEASE BID ACCORDINGLY. PAYMENT IS DUE WITHIN 3 DAYS OF CLOSE OF AUCTION. IF YOU HAVE LESS THAN 10 FEEDBACK. PLEASE SEND ME AN EMAIL SO I KNOW YOU ARE NOT A BOT OR YOUR BID WILL BE CANCELED BICTION WILL ONLY SHIP TO THE LOWER 48 STATES. BICTION WILL ONLY SELL TO CONFIRMED PAYPAL ADDRESSES. THIS MEANS IF YOU HAVE WON THIS AUCTION. IN ORDER TO HAVE IT SHIPPED YOU MUST HAVE A CONFIRMED ADDRESS ON RECORD WITH PAYPAL. IF YOU ARE THE WINNING BID AND DO NOT HAVE A CONFIRMED SHIPPING ADDRESS, BICTION WILL REFUND YOUR MONEY AND OFFER THIS PRODUCT TO THE NEXT HIGHEST BIDDER. BICTION WILL MAKE SURE TO GET THE WINNERS THEIR ITEMS FAST! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Fennec 2.5mX1.25m Portable CNC Oxy Cutter - Plasma Option
HCE1225 Portable CNC Oxy Profile Cutter Portable CNC cutting machine can cut any complex profiles on metals. Which reduces machining time and improves productivity. It supports both plasma cutter and oxy-fuel cutting torch. The compact design and lightweight. Small size make it very easy to relocate. It is usable both indoors and outdoors. The FastCAM programming software is easily learned and supports both drawing and nesting. Specification Model HCE1225 Input Voltage 240V Rated Power Supply 220W LCD Dimension 7 Inches Effective Cutting Width(X axis) 1250mm Effective Cutting Length(Y axis) 250mm Oxy Cutting Speed 0-2000mm/min Oxy-fuel Cutting Thickness 6-150mm Cross Beam Length 1870mm Longitudinal Rail Length 3000mm Cutting Gas Oxygen + Acetylene/Propane/Methane Gas Pressure 0.01~0.3 Mpa Oxygen Pressure 0.3~0.7 Mpa Weight 126kg CNC System ... moreDescription 7' LCD display Film-cover operation key USB port for program transfer Built-in library remote control Break-point& power-off restoration Two-axes linear and circular interpolation Pause. Forward, backward, and speed regulation while machine working Programming Software FastCAM standard version(includes FastCAM. Fastnest, Fastplot) The FastCAM® System has been designed to draw. Nest and cut metal as simply and efficiently as possible. Ease of use is as important as the high levels of materials utilization and optimization the software provides. Draw. Nest and cut from the one system. Packing List Longitudinal rails frame Cross beam CNC unit Power cable Electromagnetic valve cable Longitudinal rail holder Propane nozzle Torch holder FastCAM Programming software?standard version) Operation manual + Plasma arc voltage auto height adjustment(THC)
|
|
|
HyperTherm Powermax 800 Plasma Cutter 240/480 V
Is in great shape. It easily cuts 1/2 steel up to 1 inch. Runs on 240 1 phase or 480 3 phase. Setup for 240. Comes with lots of extra torch parts. Tips, ext. Shipping is included. I ONLY SHIP INSIDE THE USA.
|
|
|
Lincoln Welder Plasma Cutter Tomahawk 625 with Machine Torch USED ONLY ONCE!!!
I have a Tomahawk 625 plasma cutter with Machine Torch. I have only cut 1 sheet of 4'x8'x1/4" You will get the 3 Electrodes and 3 Nozzles that I have used since I got the plasma cutter. You will also get 20 NEW Electrodes and 20 NEW Nozzles.worth over $100) If you have any questions feel free to ask. Thanks for looking. Lincoln Welder Plasma Cutter Tomahawk 625 with Machine Torch Posted with
|
|
|
hypertherm pac121p plasma cutter gun and cable torch cutter PARTS
hypertherm pac121p plasma cutter gun and cable torch cutter PARTS This is used but was working fine until the machine itself fried. This was tested on the other machine we had in the shop and the gun still worked fine. See photos. WISCONSIN RESIDENTS AND PICK UP SALES PAY 5.5% SALES TAX•FREE SHIPPING APPLIES TO US BUYERS IN THE LOWER 48 STATES. NOT HAWAII OR ALASKA•CHECK OUT MY other items! My business is called Antique Rustler. I have been involved with antques for over 15 year. I use eBay to sell more obscure items to a broader market. I do consign items but mainly just sell my products. I expect payment within 7 business days. If you have the need to pay with a personal check be aware that it will take longer for you to recieve your item as I will have to wait for it to clear. I am a mechanic, explanation for the permanently dirty hands. ... moreI work 6 days a week and sometimes I have trouble making it to the post office I pay someone else to do my packing and try to ship as soon as I can. Sometimes the shipping calculator is inacurrate so Please wait for my invoice before you pay. If you have any questions feel free to message me, I look forward to dealing with you! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
P-80 plasma cutting torch with 5meter or 16 feet cable for air plasma cutter
This Top quality Professional P80 torch. Please do not compare our price with other Cheaper torch. As the heavy products if you order more than 2 set please contract us for better shipping cost depends on your deliver address! Weldingstop OEMed plasma cutting torch. Safe triger with patent. The country of origin: China. This Package Including: Parts Name Ref. Code Quantity Optional selection: A-class P80 electrode A-class p80 Nozzle tip 1.0mm. 1.3mm, 1.5mm, 1.7mm A-class shield cup This P80 plasma torch are fitting in(variou Plasma welding machine From 60A~120A) polit arc function; Patent switch safte. Description:
|
|
|
Lotos LTP5000D 110V/220V 50A PILOT ARC PLASMA CUTTER with CNC AUTO FEATURE
Unit is in excellent shape. Works as it should and has no damage. I used this on a 1952 truck restoration project. The job is done and now it is your turn to have fun with this plasma cutter. Also included here is a box of consumables that you would not get if you buy from many others here on ebay. Note: You need to provide the 110VAC or 220VAC plug to match your available receptacle. Please email any questions prior to purchase. I will accept returns but will not refund any shipping charges. Payment is expected within 3 business days of listing end. I can work with you but will need communication. Thank you for looking at my listing. Make: LOTOS. Model: LTP5000D(5th Generation with improved HF board) The cover of the machine is red. Type: 50 Amp Digital Inverter Plasma Cutter Condition: Used. On one project. Features: 50 Amp Digital Inverter ... moreAir Plasma Cutter Automatic Dual Voltage/ Dual Frequency(110/220V 50/60Hz) Robust Infineon(By Siemens) IGBT Power Drive Matrix with Pilot arc Function integrated. PAPST Advanced German Cooling System Max Severance Thickness: 3/4" Max Cut Thickness: 1/2" Accessories: Pilot Arc Plasma Torch(9' 5" Plasma Consumables(installed on the torch head) Extra box of electrodes& tips. Air Filter/Regulator Ground Clamp& Cable(12' Connection for Air Hose. User Manual and Quick Setup Guide ABOUT LOTOS Since 2000 Lotos introduced inverter technology in welding and cutting machines. Lotos' latest high frequency inverter technology utilizes V-MOSFETs along with PWM(Pulse Width Modulation) to deliver a far more constant. Concentrated and precise current to the cutting surface. This technology has been substantially reduced in size and weight of Inverter Plasma Cutters. It helps you to easily achieve smooth, clean cuts of wide range of surfaces and material(e.g. stainless steel, alloy steel, brass, aluminum and other conductive material) with minimal heat input and without distortion of metal. Lotos plasma cutters are designed especially for those DIY(do-it-you
|
|
|
Lincoln Electric Plasma Cutter Model # Pro-Cut 20 & Lincoln PCT 20 Hand Torch
UP FOR AUCTION IS A LINCOLN ELECTRIC PLASMA CUTTER PLASMA CUTTER IS IN VERY GOOD USED CONDITION TESTED AND GUARANTEED TO WORK PROPERLY SOME SIGNS OF WEAR FROM USE LINCOLN ELECTRIC MODEL# PRO-CUT 20 PLASMA CUTTER PCT 20 HAND TORCH 12-20 AMP CURRENT RANGE 400 VDC OPEN CURRENT VOLTAGE 20% DUTY CYCLE PICTURES ARE OF ACTUAL ITEM WINNING BIDDER WILL RECEIVE THANK YOU FOR LOOKING AND GOOD LUCK BIDDING 100% SATISFACTION GUARANTEED
|
|
|
Snap On Plasma Cutter 25AMP Very Nice Check out the Video!!
Snap On Plasma25 Works Great This Plasma cutter works just the way it should I just do not use it enough. As you can see from the pictures and video it is in great shape and makes a fast clean cut. There is a small dent under the right side foot. feel free to ask any questions. Shipping: plasma cutter will ship soon after payment is made Monday-Friday. Returns: 14 day returns buyer pays return shipping. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-1412406b009-0xff-
|
|
|
Hyperthem Max 43 Plasma Cutter w/ Less Then 15 Hours Use 3 Phase 440V
Hyperthem Max 43 Plasma Cutter w/ Less Then 15 Hours Use 3 Phase 440V, Click to View Image Album Click to View Image Album Click to View Image Album This plasma cutter has less then 15 hours on the clock but we are unable to test it. We know it has a broken lead connector but only the shell is broken so the unit would still work w/o repair. Sold for parts or repair because we can not test. Includes whip w/ cutting head. Ground lead& heavy input power cable. Model# 071054 s/n MX43-0101737. Operates on 440V 3 phase at 50% duty cycle. We ship to the USA only. Not because we don't like our neighbors but because it costs too much to do business with them. If the item has a starting price over $100. go ahead and bid from Canada or Mexico. We now accept Visa& Mastercard on our commercial auctions plus PayPal if you must. We ship via ... moreUSPS. Cheapsest way,but prefer to ship via UPS as we have daily pickup which offers a much lower rate then counter service rates. That means we are shipping at the lowest rates UPS offers. If we ship to a stand alone business the UPS rate is usually $2.50 less. If your business has a separate driveway entrance from any residence; state that and request the B to B rate. We normally ship the same day as payment arrives. CA residents must pay sales tax on our commercial auctions. If your item is in the 150 pound or higher range we are currently using YNR, formerly Yellow, a nationwide LTL carrier, or Premier Transportation a specialized machinery mover. If you wish to get a freight quote you must call us at(949)645-7601. Most machines move at freight class 85 and they are moving from MarMachine at Zip 92627. We charge 10% for packaging and it is included in the UPS charge when you get a final auction settlement. Since eBay now takes 9% of the shipping cost as a fee we get to use the other 1% to buy shipping containers and packaging material. Occaisionly we have a difficult to package or extra heavy item and there will be a packing charge listed in the auction. If you are bidding on
|
|
|
MARQUETTE 25 AMP PLASMA CUTTER MODEL M12149 120 VOLTS WITH ACCESSORIES
WELCOME TO NTLAUCTIONS22.99 CENT AUCTIONS WE HERE AT NTLAUCTIONS22 STRIVE TO BE A FIVE* STAR SELLER. Item Description THIS AUCTION IS FOR A MARQUETTE 25 AMP PLASMA CUTTER MODEL M12149 120 VOLTS WITH ACCESSORIES MADE IN ITALY PLEASE VIEW ALL PICTURES. HAS THREE PRONG POWER CORD IN NEED OF A NEW TIP OVERALL CONDITION: IN GOOD CONDITION. SHOWS SIGNS OF USE AND COSMETIC WEAR. MANUFACTURER: MARQUETTE MODEL# M12149 COUNTRY OF MANUFACTURE: MADE IN ITALY ACCESSORIES: COMES WITH P30 TIP AND AIR NIPPLE. INVENTORY# STORE 26 649482-1 ADDITIONAL COMMENTS: THIS ITEM COMES AS SHOWN AND DESCRIBED NOTHING ELSE IS INCLUDED. Payment Information: Shipping Information WE ACCEPT PAYPAL ONLY PLEASE CALL US FOR INFO IF YOU ARE LOCAL AND WANT TO VIEW AND CHECKOUT AN ITEM BEFORE THE AUCTION ENDS( 602-242-2255) SALES TAX WILL BE CHARGED TO ALL LOCAL PICK UPS AND SALES. ... moreSHIPPING IS A FLAT RATE TO THE CONTINENTAL 48 STATES.ALASKA, HAWAII, AND PUERTO RICO WILL INCUR ADDITIONAL SHIPPING CHARGES(FOR RATES SEE COST BELOW) ALL ITEMS SHIPPED FED EX GROUND UNLESS OTHERWISE STATED IN SHIPPING TAB. LOCAL PICK UP IS OK. PLEASE CALL( 602-242-2255) TO ARRANGE FOR LOCAL PICK-UP Policy For NTLAUCTIONS22 OTHER SHIPPING CHARGES ALL ITEMS WE SELL ARE PREVIOUSLY OWNED UNLESS OTHERWISE STATED. ONLY THE ITEMS DESCRIBED AND PHOTOGRAPHED WILL BE INCLUDED. SHIPPING ON RETURNS WILL BE PAID FOR BY THE BUYER. THE FOLLOWING STATES AND LOCATIONS HAVE HIGHER SHIPPING CHARGES THAN STATED IN THE AUCTIONS: WE DO NOT SHIP TO APO OR FPO ADDRESSES HAWAII ALASKA PUERTO RICO FOR INTERNATIONAL BUYERS. WE AT NTLAUCTIONS22 CANNOT BE HELD LIABLE FOR ANY DELAYS IN SHIPPING DUE TO INCLEMENT WEATHER, CUSTOMS,TAXES, OR IMPORT DUTIES. WE ONLY SHIP EXPRESS MAIL INTERNATIONAL ON ALL ITEMS WITH A VALUE OVER $250.00 AND WE WILL REQUIRE SIGNATURE CONFIRMATION AS WELL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Lotos lt5000d plasma Cutter - Intermittant cut... may be an easy fix.
2 year old Lotos LT5000D non pilot arc plasma cutter. These go for over 400 new. This unit ran perfect until a couple weeks ago when it would start a cut and then just loose arc. I contacted Lotos and they said they thought it might be the torch. I had a project that had a tight time table. I had to buy another unit and now my wife says I can only have one! If it's the torch. Then for around 50 bucks you'll have a good unit. The unit powers up and air portion works. You get everyting minus the electrial plug and air fitting. I've listed this item as"parts" thought I really think between a possible torch replacement and LOTOS customer service. the winner of this will get a great deal. On my end. happy wife = happy life! It's a win-win
|
|
|
Snap on Plasma Cutter LOCAL PICKUP ONLY!!!
Snap On Plasma Cutter model plasma 25 LOCAL PICKUP ONLY! This is too big for us to ship so it is local pickup. Meaning you have to come to our store to pick this up. We are Jery's Pawn located approx. 5 miles off I-95 in Hope Mills. NC. Our phone number is(910) 426-7999. I f you are local and want to look at this refrigerator in person please come by and check it out! Feel free to ask any questions. Be sure to see our and add us to your because we add new items often.
|
|
|
NICE THERMAL DYNAMICS AIR PLASMA CUTTER SYSTEM MODEL CUTMASTER 75 for repair
NICE THERMAL DYNAMICS AIR PLASMA CUTTER CUTTING SYSTEM MODEL CUTMASTER 75 Was working great went to use it in the shop the other day and it would now turn on. so i went and bought me a new one. for parts or repair. Idk nothing about these machines. Ask any questions you would like. asis On Sep-19-13 at 07:49:11 PDT. Seller added the following information: CORRECTION TYPO Was working great went to use it in the shop the other day and it would NOT turn on. so i went and bought me a new one. for parts or repair. Idk nothing about these machines.
|
|
|
ESAB, Plasma Oxy fueled GXB-1200 Shape cutter gantry
Used. Good shape. Needs repair, possible servo problem) Equipped with AUTOPATH GX controller. Width 12' with 30' travel length, table not included. As is- where is. Buyer responsible for cost of shipping. We can load onto suitable carrier.
|
|
|
MILLER SPECTRUM 375 CUTMATE PLASMA CUTTER 907532 WITH CART
Brand new only used three times it has just been sitting in storage.
|
|
|
HYPERTHERM POWERMAX 30 PLASMA CUTTER LIGHTWEIGHT PORTABLE
HYPERTHERM POWERMAX 30 PLASMA CUTTER LIGHTWEIGHT PORTABLE Items sold include what is described and pictured. Which from time to time may not include all the accessories included with the items original new purchase package. Our items are used and arrive in our hands with limited accessories. Up for auction is a HYPERTHERM POWERMAX 30 PLASMA CUTTER LIGHTWEIGHT PORTABLE. This plasma cutter is in good used condition with expected signs of wear and tear from use. This unit has been tested to the best of our abilities but has not been put under strenuous load by cutting for extended periods of time. This would be a great purchase for anyone who needs a mobile plasma cutter as this unit is lightweight and easy to move around. All items included in the auction are depicted in the photographs provided. If you are the winning bidder please include ... moreyour phone number on your PayPal payment so we can contact you directly with any questions regarding shipping. Thank you& happy bidding! This auction includes everything pictured unless mentioned otherwise- ¦: ¦: Another great auction from BIXBYSALES15210! ¦: ¦: CHECK OUT OUR FEEDBACK AND BID WITH CONFIDENCE. THANK YOU. Please do not hesitate to send me an email. A message through eBay, or give me a call@ 918-366-6000: M-F 10am-5pm central) with any questions you may have about this, or any of my other auctions! NORMAL OFFICE HOURS(CENTRAL TIME ZONE) MON-FRI 9- 5:30. SAT 10- 4:30 WE ARE NOT OPEN MOST FEDERAL HOLIDAYS. WE ARE NOT OPEN ON SUN. PLEASE ALLOW 24- 48 HOURS FOR EMAIL RESPONSE. International Shoppers Due to Paypals reluctance to accept any form of international shipping tracking confirmation numbers we can not at this time ship outside the United States! Payment PAYMENTS MUST BE MADE BY PAYPAL OR IN PERSON WITHIN 1 WEEK UNLESS ARRANGEMENTS ARE MADE BEFORE THE CLOSE OF THE AUCTION. IF IT WILL TAKE YOU LONGER THAN ONE WEEK TO PAY PLEASE CONTACT US BEFORE YOU BID! Local Pickup L OCAL PICKUPS ARE ALWAYS ALLOWED. BUT DON'T FORGET IF YOU PICK
|
|
|
Hypertherm Powermax 380 Plasma Cutter Power Max Plasma Cutting System
New Page 2 DESCRIPTION: You are bidding on a Hypertherm Powermax 380 Plasma Cutting System. PHYSICAL CONDITION: Used This item has the typical signs of use. Such as small marks, scratches, scuffs, etc. It is otherwise in good overall used condition. See pictures for details of item and condition. Click on them for a larger view. FUNCTIONALITY: This item came from a working environment. We will guarantee it to work upon arrival. AUCTION INCLUDES: Hypertherm Powermax 380 ONLY as pictured. Auction items include only what is in the eBay picture(s) unless otherwise specified above. Including manuals, cables, cords, accessories, power supplies, etc. MODEL: Powermax 380 SN: xxx23115 D917 RETURN POLICY We guarantee that this item will be in the condition stated above upon receipt. We offer a 7 day return policy in the event the item is not received ... moreas described. All returns must be authorized with an RMA# Items must be the original condition and be approved/received within specified timeframe. Otherwise the return will be rejected and refund will not be given. Return shipping is the responsibility of the buyer. Items returned, but are as described in original listing will be subject to a 20% restocking fee and original shipping will not be refunded. SHIPPING INFO Our goal is to ship your item within 1-2 business days after payment has cleared. Freight items may take 2-3 business days. For your and our safety, we only ship to the confirmed Paypal address(AKA billing address) if you choose that option. Need it shipped elsewhere? Pay via cashiers check. o) Let's hope this does not occur. However in the event that an item is damaged during transit, buyer must notate that with the driver before signing for the package. Keep the box and all packaging materials and contact us within 2 business days of receipt of item. The flat rate listed is for delivery to the continental US only. Local Buyers may pick up items Mon- Fri between 9:00am and 4:00pm. Pay for the item in full first. Please, unless you are paying with cash
|
|
|
HYPERTHERM 65 PLASMA CUTTER 50FT TORCH LEAD NICE!
Paypal. Visa, Mastercard, American Express. We would like this transaction to be a great one for you so please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. HYPERTHERM 65 PLASMA CUTTER 50FT TORCH ... moreLEAD NICE! We have a video above of the plasma cutter operating; press play. DESCRIPTION: ~ Up for bid is a good working Hypertherm 65 plasma cutter. It is about a year old and is still under warranty from being bought new. It has the 50ft torch lead option. Single phase powered. Original box is included. gsrx_vers_525(GS 6.6.5(525)
|
|
|
Plasma Cutter Wiring Harness Thermal arc Thermal Dynamics With Torch 25 Ft
Here Is a 25 Foot Harness For A Merlin Thermal Arc Pak 15 x C Plasma Cutting System. Good Condition. The Head Has A Small Crack WHICH IS PICTURED. May Fit On Other Models. PLEASE MAKE SURE YOU KNOW WHAT YOU ARE BIDDING ON. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14153944a41-0xf8-
|
|
|
ESAB PCM750i PLASMA CUTTER W/ TWO TORCHES
THIS LISTING IS FOR A ESAB PCM750i PLASMA CUTTER WITH TWO(2) TORCHES. ESAB LISTS THE MAX CAPACITY OF THIS UNIT AT 3/4" MATERIAL. THIS IS A 230V 1Ph POWERED UNIT P/N 33980. IT IS SINGLE PHASE ONLY! THIS UNIT HAS THE FOLLOWING: 25FT GROUND CABLE 10FT POWER CABLE 25FT HAND HELD TORCH 10FT REMOTE SWITCH(FOR USE WITH MECH TORCH) 25FT MECH TORCH(FOR USE ON BUG-O OR SIMULAR TRACK OR CNC CUTTING PLATFORM) WEAR ISSUES: 1) NO HANDLES(SCHOOL USED WITH BUG-O AND MOUNTED ON CART) 2) TWO SMALL DENTS IN METAL COVER SHOWN IN PX. 3) NO GROMIT AROUND CABLE ENTRY. 4) PLASTIC AIR REGULATOR SHIELD HAS A CRACKED SCREW MOUNT. AND ONE BROKEN SCREW MOUNT. PROTECTS REGULATOR, BUT IS NOT PART OF REGULATOR. LISTING IS FOR LOCAL PICK-UP ONLY. WE WILL BOX FOR LTL SHIPPING FOR $35.00 AND MEET YOUR LTL CARRIER IN 80477. ALL OTHER SHIPPING COSTS ARE YOURS! NO INTERNATIONAL. ... moreAPO'S, HI OR AK. IF YOU NEED SHIPPING. REMEMBER THAT THIS UNIT WEIGHS ABOUT 75# COMPLETE. IS 20" X 28" X 20" IF YOU PICK THIS UNIT UP. OR WE SHIP TO A COLORADO ADDRESS WE MUST CHARGE 3.9% STATE SALES TAX.
|
|
|
Thermal Dynamics Pac 5XR plasma cutter
This unit is in great condition for its age. Check the pictures out for all the info.
|
|
|
THERMAL DYNAMICS 50 foot plasma cutter extention for SL60 1torch..used in box
50 foot extension for an SL60 1Torch. smarttorch. not sure what else. I never used it more than three times. as with all extensions there is a time delay for the torch to start cutting. its annoying but you get used to it
|
|
|
Hypertherm Max100 Portable Plasma Cutter Cutting System 1-1/4 Max Thickness
SKU: 640685 A: 0015000000EhsWB O: 0065000000OTd11 PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Hypertherm Max100 Plasma Cutting System in good condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Hypertherm Model: Max100 Serial Number: 70-33049 Transport Weig ht: approx. 445 lbs. Transport Dimensions: L 48" x W 44" x H 43" Features/ Specifications: ... moreMaximum OCV: 280 VDC Output Current: 30-100 Amps Output Voltage: 150 VDC Duty Cycle Rating: 80% 15 KW Gas Type: Air. Nitrogen Gas Quality: Clean. Dry, oil free Gas Flow: 440 scfh Gas Inlet Pressure: 70 psi Gas Pressure Setting: 60 psi Resources: For more information on this unit including full specifications, view the manufacturer’s brochure(pdf) Condition: Unit is in good overall condition Working at time of decommission unit is untested by bidadoo Normal wear from previous use in working industrial environment See photos for more details Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to mach
|
|
|
RAMSOND CT520DY 3-IN-1 PLASMA CUTTER TIG ARC WELDER 200A with Pedal Consumables
This is like new and was over $1000 total purchase price. You are getting it for half off! I used this for one project. It worked well. This comes with all factory items. An add on pedal and consumables pack. Thanks for bidding!
|
|
|
Linkoln Electric Pro Cut 80 Plasma Cutter K-1581-1
Up for sale is Linkoln Electric Pro Cut 80 Plasma Cutter K-1581-1! This item is pre-owned but is still in great working condition. It shows some signs of normal use(please zoom all pictures) This item is fully functional and damage-free. MSRP: $5.289.00! The photos on this listing are of the actual item you will be receiving. Comes with everything pictured. Nothing else other than shown on the pictures is included. If you have any questions regarding this listing please feel free to ask and we will get back to you ASAP! Thank you! Lincoln Electric Pro-Cut 80 Plasma Cutter The Pro-Cut 80 exhibits maximum cutting ability with a full 85 amps of power. Slicing through metal up to 1-1/4" 32mm) thick with ease! Using six patented technologies, the unit is perfect for maintenance, fabrication or other applications, which require cutting of ... morethicker metals. The machine weighs only 95 lbs. 43 kg. and its optional“valet style” undercarriage provides uncluttered cable storage and easy transport on the job site. Features 85 amps of power for quality cut performance up to 1-1/4" 32mm) in only a 95 lb. 43kg) package. Dual winding technology for fast arc transfers and improved cut quality. Patented PCT 80 torch and VORTECH™ technology consumables for excellent cutting speed and performance. Can be powered by most Lincoln engine driven welders for ultimate portability. Back-lit LED system for status indicators eliminates confusion yet conveys all the information necessary to monitor the power source readiness. Parts-In-Place safety indicator and lockout circuit to protect both the operator and the system. Quick disconnect torch for fast and easy torch removal. Valet Style" undercarriage available for easy transport around the shop or site. CNC/Robotic Interface is included as a standard feature. Three-year warranty on parts and labor. 1 year warranty on plasma torch. Cutting Specifications: Maximum Cutting Thickness- Inches: 1-1/4" Rated Output- Current/Duty Cycle: 65/100% 80/60% Cutting Capacity: 3/4" 18
|
|
|
Hypertherm PowerMax 380 Plasma Cutter with Handheld Torch
Hypertherm PowerMax 380 Plasma Cutter. Used Part#070075 Recommended Cut up to 1/4" Max Cut 3/8" Severance up to 1/2" This listing is for a used unit. It has been checked out by our certified repair shop and is in good working condition. No factory warranty available) Includes machine. Power cable, work lead and torch. Good for most light and medium maintenance and repair jobs We are a Welding Supply company. That has been selling new and used equipment and supplies for over 40 years. If you want further information or have any questions. Please feel free to give us a call. Jodi 602-396-1178 or 602-252-0341 John 602 206-0571
|
|
|
snap on plasma cutter - local pick up only!!!
Snap On- model YA2001A 40amp plasma cutter. I bought the unit used and it had just been serviced and checked for proper functionality. Local pick up only due to weight.
|
|
 |