In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
9.24
Buy It Now
Free Shipping
Condition: New
Location: China
【Quality Material】:Our Welding Hand Pad is designed with high heat resistance and fireproof material, providing ultimate protection during welding jobs. ... more【High Performance】:With a comfortable grip, our welding protective pad reduces hand fatigue, making it suitable for all welding jobs.
$
38.12
Buy It Now
$10.17 Shipping
Condition: New
Location: Australia
White soft cow grain rigger gloves. Kevlar sewn. General-purpose glove. Excellent general welding glove. Good feel for welding, construction, material ... morehandling, driving, general-purpose. Choose 12, 24 or 48 pairs.
$
40.99
Buy It Now
Free Shipping
Condition: New
Location: Winona, United States
• Goatskin thumb, index, and middle finger. Material: Goatskin. Black Stallion Part # GT7120-NB-2X. • Rugged split cowhide ring finger and pinky. • Comfortable ... morepre-curved ring finger and pinky. • Embedded padded DragPatch® and RestPatch®.
$
28.74
Buy It Now
Free Shipping
Condition: New
Location: China
This is a pair of welding glove, made of premium material for durable and practical use. 1 x pair of welding gloves. - Wear and insulation, you can use ... morethese gloves for many occasions. High Temperature Resistance Anti-glare Cowhide Suede Man Welding Hood Headgear.
$
14.66
Buy It Now
Free Shipping
Condition: New
Location: China
Durable, and breathable, fire, wearable, soft, heat and fire resistance. 1 Pair of Welding Gloves. It can be applied in welding,, heat resistant and other ... moreworkplaces. Elastic string on the wrist gloves.
$
73.50
Buy It Now
Free Shipping
Condition: New
Location: Rangely, United States
1- Dozen West Chester Cowhide Welders Gloves Large Grey. are exposed to many and varied conditions due to the manner in the way they are installed and ... moreused. Fireside Diesel Parts & Performance LLC. Fireside Diesel Parts & Performance LLC judges improper Failures resulting from any use or installation will void all warranty.
$
15.43
Buy It Now
Free Shipping
Condition: New
Location: 金东区, China
Material: leather gloves. 1 Pair of gloves. Leather fabric is soft, with good heat insulation and penetration. Wrist closure design increases durability ... moreand facilitates work. Carefully process the wiring to prevent splashing.
$
10.41
Buy It Now
Free Shipping
Condition: New
Location: Raleigh, United States
Purpose: Welding Gloves, Gauntlets, Welders Glove, Labor Heat Protection. Material: cowhide leather. Lining: twill material. 1 pair Sandbag Punch Training ... moreKids Children Boxing Gloves Boys/Girls Fight.
$
20.36
Buy It Now
Free Shipping
Condition: New
Location: Corydon, United States
Tillman 1018 Slightly Shoulder Select Cowhide Welding Gloves. 2X-Large Click an Image to Enlarge Slightly Select Shoulder Split Cowhide. Cotton/Foam lined, ... more14" length. Reinforced wing Thumb, Kevlar stitched with Welted fingers. TL10182X Welcome to the Weldfabulous eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. After winning an item in auction or completing a Buy It Now purchase. You have two check-out options: Check-Out Now! Click the at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later If you do not choose to Check-Out now. You will be notified by eBay via e-mail that you are the winning bidder. There is no need to contact us to arrange payment. We will automatically send you an e-mail within three hours of an auction closing. Our message will contain a link to our simple and secure checkout system, where you will be able to quickly and conveniently pay for your purchase. Payment We accept the following forms of payment. PayPal Visa. MasterCard, American Express, and Discover credit card payments through eBay Checkout Sales Tax Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 For shipment to Minnesota. Wisconsin, and Iowa addresses, we are required by State law to collect sales tax for the appropriate states. Tax rates are as stated below Minnesota: 6.875% Wisconsin: 5.5% Iowa: 7% Normal 0 false false false EN-US X-NONE X-NONE Domestic Shipping Continental United States UPS Ground and USPS Priority Mail are our standard shipping methods within the Continental US. We offer free shipping on all items except cylinders. UPS Ground requires 1 to 6 business days to arrive after leaving our facility and is fully traceable in route. We cannot ship large packages to PO Boxes so please be sure to provide us with a physical shipping address. For specific small.
$
16.99
Buy It Now
Free Shipping
Condition: New
Location: Bellflower, United States
FLEXIBLE & Breathable:U nlike those heavy gloves, light weight, will not effect the flexibility of your fingers. Cotton liner for heat insulation, absorb ... moresweat without sacrificing safety. Easy to clean, will not fade.
$
31.45
Buy It Now
Free Shipping
Condition: New
Location: China
932°F Long Sleeve Welding Gloves Heat Resistant Leather Grill BBQ Glove for Welder Grilling Barbecue Oven Wood Stove. Antistatic Gloves : Barbecue gloves. ... moreGrilling Gloves : BBQ Gloves. Material : Cowhide and Insulated cotton.
$
11.71
Buy It Now
Free Shipping
Condition: New
Location: United States
Color: grey, yellow. Material: leather. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
$
16.01
Buy It Now
Free Shipping
Condition: New
Location: China
Tear-resistant Welding Gloves Breathable Cotton Lining Comfortable GlovesFeatures: The gloves are made from natural leather.They are heat resistant, wear-resistant ... moreand oil resistant.Excellent and exquisite stitching, each finger can be used flexibly;The soft lining for excellent of heat resistance and sweat absorption.Perfect for working,welders,BBQ,heat insulation,camping, gardening , and more;Specifications:Length:Approx.34cm/13.39inColor:WhitePackage Includes: 1Pair Welding Glovesnote: Please allow 1-2cm errors due to manual measurement,please make sure that you do not mind before you order.Due to the difference between different monitors, the picture may not reflect the actual color of the item.
$
42.29
Buy It Now
Free Shipping
Condition: New
Location: Gainesville, United States
Precision Arc Goatskin Leather TIG Welding Gloves with Paraactiv Liner Cut Protection 370GFKLL (1 Pair Work Gloves) Large. CUT PROTECTION: These gloves ... morefeature a ParaActiv engineered yarn liner to provide 360° cut protection with low ANSI A2 cut resistance and ANSI 3 heat protection and spark resistance while extended gauntlet cuffs provide extra wrist protection.
$
11.57
Buy It Now
Free Shipping
Condition: New
Location: China
$
25.63
Buy It Now
Free Shipping
Condition: New
Location: China
Material: Cowhide. The extra leather strip on the finger crotch for more durability, stone thumb for dexterity. Function: Nonslip, Fire Protection. Safety ... morecuff for extra protection, rubberized cuff for easy on and off.
$
36.67
Buy It Now
Free Shipping
Condition: New
Location: Miami, United States
Inner layer:a 100% soft insulated cotton lining. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the ... morehand which is not easy to fall off. Kevlar Insulated Cotton with Air-isolated Aluminum Foil.
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Winona, United States
• ThermoCore foam insulated with full cotton lining for added comfort and heat protection. Steiner's B-Series premium stick welding gloves are the preferred ... morechoice among professional welders. Length: 14".
$
8.44
Buy It Now
$8.00 Shipping
Condition: New
Location: China
Free Shipping Carbon fiber fireproof Working safty Protective gloves welder gloves welding gloves Brand Name: OEM Model Number:H0021 material:carbon fiber ... more+ PE Heat temperature:max 250 ℃ Comfort level:Light soft color:gray Place of Origin: Beijing. China(Mainland) size:32.5cm* 17.8cm* 0.2cm
$
24.00
Buy It Now
$11.60 Shipping
Condition: New
Location: Las Vegas, United States
HARLEY DAVIDSON BACON-DALLOZ. and black welder’s glove is fully lined for extra protection from the heat associated with welding. Premium cow hide, split ... moreleather, orange. Harley-Davidson® “Ride Free” round patch sewn onto.
$
88.67
Buy It Now
$23.65 Shipping
Condition: Brand New
Location: Malaga, Australia
The perfect combo for any TIG welder trying to master the art of the finger shuffle or experienced TIG welders wanting to give the fingers a rest, look ... moreno further than the DAB Pen. Blue Demon Dab TIG Wire Pen + Guide TIG Gloves + Original TIG Welding Finger.
$
24.00
Buy It Now
$11.60 Shipping
Condition: New
Location: Las Vegas, United States
HARLEY DAVIDSON BACON-DALLOZ. and black welder’s glove is fully lined for extra protection from the heat associated with welding. Premium cow hide, split ... moreleather, orange. Harley-Davidson® “Ride Free” round patch sewn onto.
$
21.98
Buy It Now
Free Shipping
Condition: New
Location: China
This welding oversleeve is tailor made to protect you and your clothes from hot sparks as you work with your welder! This welding oversleeve is a must ... morefor any welder’s safety! Protect clothes from hot sparks.
$
9.50
Buy It Now
Free Shipping
Condition: New
Location: China
【Quality Material】:Our Welding Hand Pad is designed with high heat resistance and fireproof material, providing ultimate protection during welding jobs. ... more【Practical to Use】:This welding heat pad is a must have for any professional or DIY enthusiast who regularly performs welding tasks.
$
18.99
Buy It Now
$15.45 Shipping
Condition: New
Location: McKeesport, United States
Welding Gloves HEAT RESISTANT Cow Split Leather BBQ/Camping/Cooking Gloves Baking Grill Gloves Welder Fireplace Stove Pot Holder WorkPlace Glove.
$
12.03
Buy It Now
Free Shipping
Condition: New
Location: China
1 pair of welding gloves. Product function:Welding special. durable and protective - these work gloves are made from carefully selected, high quality ... moregrain cowhide and two-ply cowhide. Colour: Yellow.
$
33.31
Buy It Now
Free Shipping
Condition: New
Location: United States
Perfect protection for TIG, MIG, barbecue, stove, fireplace and animals handling. ONE SIZE FIT MOST - One size fit most design, never worry about the ... morefit. OZERO heat resistant gloves perfect for outdoor barbecue, garden grilling, kitchen cooking or welding.
$
34.00
Buy It Now
Free Shipping
Condition: New
Location: Winona, United States
Steiner 8502 Premium Grain Elkskin Back, Reverse Grain Elkskin Palm Stick Welding Gloves - ThermoCore Foam Lined Back. Steiner's most famous stick welding ... moregloves are the popular choice of pipeline welders.
$
14.78
Buy It Now
$16.26 Shipping
Condition: Brand New
Location: Ballina, Australia
TIGMATE RT. TigMate® RT TIG Welding Glove. TIG Welding Glove Long Cuff. Certified by SAI Global to AS/NZS 2161.3:2005 Occupational protective gloves -. ... moreprotective gloves – Protection against thermal risks (heat and fire) EN407.
$
19.99
Buy It Now
$7.99 Shipping
Condition: New
Location: China
1 Pairs Leather oversleeve Welding Heat insulation protection Safety oversleeve. This welding oversleeve is tailor made to protect you and your clothes ... morefrom hot sparks as you work with your welder! This welding oversleeve is a must for any welder’s safety!
$
34.95
Buy It Now
Free Shipping
Condition: New
Location: Churchville, United States
Made ofTop grain Cowhide. Reinforced thumb. Cotton/foam lined back for added heat protection, unlined palm for enhanced dexterity.
$
23.99
Buy It Now
Free Shipping
Condition: New
Location: Winona, United States
The Tillman 1325 TIG glove answers the challenges TIG welders face. Size: Large. • Reinforced rough side out Goatskin on the tip of the thumb and forefinger ... morefor longer wear. Tillman Part # 1325L. Material: Goatskin.
$
9.50
Buy It Now
Free Shipping
Condition: New
Location: China
【Quality Material】:Our Welding Hand Pad is designed with high heat resistance and fireproof material, providing ultimate protection during welding jobs. ... more【Practical to Use】:This welding heat pad is a must have for any professional or DIY enthusiast who regularly performs welding tasks.
$
135.57
Buy It Now
$39.41 Shipping
Condition: Brand New
Location: Greenacre, Australia
White soft cow grain rigger gloves. Kevlar sewn. General-purpose glove. Excellent general welding glove. Good feel for welding, construction, material ... morehandling, driving, general-purpose. Choose 12, 24 or 48 pairs.
$
22.99
Buy It Now
Free Shipping
Condition: New
Location: Charlotte, United States
WIDE APPLICATION: You can use our fire resistant gloves for welding protection, such as mig welding, stick welding, and flux cored welding. You can also ... moreuse them for many other tasks, such as forge, grill, barbecue, stove, oven, fireplace, baking, animal training and so on.
$
9.54
Buy It Now
Free Shipping
Condition: New
Location: China
【Quality Material】:Our Welding Hand Pad is designed with high heat resistance and fireproof material, providing ultimate protection during welding jobs. ... more【Practical to Use】:This welding heat pad is a must have for any professional or DIY enthusiast who regularly performs welding tasks.
$
9.26
Buy It Now
Free Shipping
Condition: New
Location: China
【Quality Material】:Our Welding Hand Pad is designed with high heat resistance and fireproof material, providing ultimate protection during welding jobs. ... more【High Performance】:With a comfortable grip, our welding protective pad reduces hand fatigue, making it suitable for all welding jobs.
$
95.99
Buy It Now
Free Shipping
Condition: New
Location: United States
Introducing the Caiman Premium Sheep Grain MIG/Stick Welding Glove, a superior choice for welders seeking exceptional comfort, durability, and performance. ... moreExperience a superior fit and unparalleled dexterity with Caiman's exclusive 3-D Kontour patterns.
$
27.39
Buy It Now
Free Shipping
Condition: New
Location: Israel
The Comfortable Welding Gloves with Long Sleeves and Cool Design You've Been Waiting For! These leather welding gloves with kevlar stitching provide a ... moregreat dexterity for veterinarians. Arc Welding!
$
9.54
Buy It Now
Free Shipping
Condition: New
Location: China
【Quality Material】:Our Welding Hand Pad is designed with high heat resistance and fireproof material, providing ultimate protection during welding jobs. ... more【High Performance】:With a comfortable grip, our welding protective pad reduces hand fatigue, making it suitable for all welding jobs.
$
29.73
Buy It Now
Free Shipping
Condition: New
Location: China
9 PCS Aluminum Cable Needles Sewing Crochet Hook Knitting Kit Bracket. Welding is really a hard work and people are easy to get hurt during the work even ... morewearing a pair of gloves. Our gloves are more durable and features better heat resistance and wear resistance, perfect working gloves for various work.
$
31.13
Buy It Now
$14.99 Shipping
Condition: New
Location: China
This welding gloves can protect your hands from heat, which is essential for anyone performing welding jobs safely. One Pair of Welding Gloves.
$
184.57
Buy It Now
$52.45 Shipping
Condition: Brand New
Location: Malaga, Australia
Weldclass Platinum Tig Gloves. WHY USE WELDCLASS PLATINUM TIG WELDING GLOVES?. Weldclass PROMAX Blue XC Welders Gloves - Full Arm MIG glove. Weldclass ... morePlatinum Soft Skin TIG Gloves and ORIGINAL TIG fin.
$
37.62
Buy It Now
Free Shipping
Condition: New
Location: Bronx, United States
Fully cotton inner lining can absorb sweat and add heat resistance. ♥ Wipe clean with a damp cloth. Hang to dry. Do not machine wash or dry. ONE SIZE ... moreFIT MOST - One size fit most design, never worry about the fit.
$
43.99
Buy It Now
Free Shipping
Condition: New
Location: Denver, United States
Grain Goatskin. Reversed Goatskin. TIG——Style 1 (537009). Gusset cuff design is dust-proof and provides more protection against heat/ puncture. Typically, ... moregoatskin is used as the primary leather in TIG gloves since it has a terrific feel.
$
16.87
Buy It Now
Free Shipping
Condition: New
Location: China
It can be applied in welding,, heat resistant and other workplaces. 1 Pair of Welding Gloves. We'd like to settle any problem in a friendly manner. Durable, ... moreand breathable, fire, wearable, soft, heat and fire resistance.
$
98.52
Buy It Now
$23.65 Shipping
Condition: Brand New
Location: Malaga, Australia
6 Pair of Guide G1230 TIG welding gloves (part number G1230). 6 x Guide G1230 Swedish TIG Gloves - Goat Skin - Size Large. 6 x Guide G1230 Swedish TIG ... moreGloves - Goat Skin - Size XL - G. The GUIDE 1230 takes dexterity and comfort to another level.
$
9.64
Buy It Now
Free Shipping
Condition: New
Location: China
【Quality Material】:Our Welding Hand Pad is designed with high heat resistance and fireproof material, providing ultimate protection during welding jobs. ... more【Practical to Use】:This welding heat pad is a must have for any professional or DIY enthusiast who regularly performs welding tasks.
$
82.11
Buy It Now
$17.90 Shipping
Condition: Brand New
Location: Ballina, Australia
TIG MATE Extended welders gloves made of soft grain leather with Kevlar stitching. TIG MATE Extended is designed for dexterity, durability and comfort ... morefor soft touch TIG welding. TIG Welding Glove. TIG MATE Extended welding glove is high touch welding glove.
$
19.28
Buy It Now
Free Shipping
Condition: New
Location: China
【Superior Protection】: These Arm Protection Work Sleeves provide comprehensive protection against sparks, spatter, and heat while welding. They cover ... moreyour arms entirely, preventing burns and injuries, ensuring your during all welding operations.
$
19.95
Buy It Now
Free Shipping
Condition: New
Location: Oregonia, United States
HI FOLKS! Plastic bag is different on this last pair. Gloves are exactly same. YOUR GETTING A NEW PAIR OF THE ORIGINAL (BIG BUCK) DEER LEATHER WELDERS ... moreGLOVES. SUPER, SUPER SOFT!!! SEWN MADE WITH 100% DUPONT KEVLAR I ONLY HAVE LARGE AT THIS TIME VIEW PICS FOR DETAILS SHIPS FREE THANK YOU
$
28.51
Buy It Now
Free Shipping
Condition: New
Location: China
Size: 60cm length. Material: Cowhide. 1 Pair of Work gloves. Function: Waterproof, wear-resistant, non-Slip, stab proof, heat Insulation. Due to the different ... moremonitor and light effect, the actual color of the item might be slightly different from the color which is showed on the pictures.
$
32.84
Buy It Now
$23.65 Shipping
Condition: Brand New
Location: Malaga, Australia
Injection mould repair where a preheat is required. Anyone who has ever TIG welded Aluminium knows how hot it gets. Its hard to prop without burning your ... morefingers. HOW A TIG FINGER WORKS. So instead of propping on a ball of duct tape, a wood block, or a scrap leather glove, just put on a Tig Finger and prop wherever you like.
$
24.95
Buy It Now
$23.65 Shipping
Condition: Brand New
Location: Malaga, Australia
WHY USE WELDCLASS GLOVE SAVERS ?. Weldclass Glove Saver Protector - Right Hand. Weldclass PROMAX Blue XC Welders Gloves - Full Arm MIG glove. Weldclass ... moreBuckle Fastening Welders Spats - PROMAX BLUE Leath.
$
35.77
Buy It Now
Free Shipping
Condition: New
Location: Corydon, United States
Kevlar Stitching And Pull Tab Carded Welders Glove With Straight Thumb Stiff Cowhide Cuff Welted Fingers Glove Weldng Medium Pearl Gray 14" Top Grain ... moreElk Cotton Foam Lined
$
37.44
Buy It Now
Free Shipping
Condition: New
Location: United States
The ultimate multi function gloves – Use them for your welding and working tasks or as an oven mitts/pot holders while handling the barbecue, smoker, ... morefryer, dutch oven, pizza stone, big green egg etc.
$
11.84
Buy It Now
Free Shipping
Condition: New
Location: China
Made of high quality cowhide leather material,durable. Material:cowhide leather. 1 Pair Welding Gloves. Widely used in welding, barbecue, barbecue, wood, ... moreoven, fireplace, cutting, gardening, camping, campfire, animal handling, welder, etc.
$
29.99
Buy It Now
Free Shipping
Condition: New
Location: Winona, United States
The Traditional Leather Drivers Gloves are made of white top grain cowhide, grey split cowhide and feature an unlined interior. • Top grain leather palm ... moreand grey split cowhide top hand for balanced protection & comfort.
$
183.91
Buy It Now
$57.24 Shipping
Condition: Brand New
Location: Malaga, Australia
12 Pairs of Guide G1230 TIG welding gloves (part number G1230). The GUIDE 1230 takes dexterity and comfort to another level. One of the thinnest and softest ... moreTIG welding gloves available, the GUIDE 1230 is made from the best possible goat grain leather.
$
32.45
Buy It Now
Free Shipping
Condition: Unspecified
Location: Sri Lanka
100% Heavy Duty Cowhide Leather. Premium Heavy Duty Cowhide Leather Construction. Grill Gloves, fireplace or other high temperature applications or animal ... morebite proof with wear-resistant, fire resistance, puncture resistant, cut resistant, tear Resistance and oil resistant.
4 5 6 7 8 9 10 11 12 13 14 15
 In 

Former Listings  
 
ESAB powerMig 385Amp Welder
Selling on behalf of my boss. If you have any questions it may take me a day to answer as I will have to check with him. This is an ESAB 385 amp Mig Welder with traveller. Hand piece and trolley. This is a commercial level welder. This has been tested and works fine We can arrange delivery in South Australia either personally or by freight. For interstate contact us and we will see what we can do. Please contact us to negotiate/arrange freight before auction ends.
Miller Syncrowave 351 TIG Welder H20 + Options COMPLETE RIG!
Unbelieveably Nice Set Up! Complete. Ready to Weld- Just Add Gas& Electricity This is a USED SINGLE PHASE(220/440v) Miller Syncrowave 351 TIG welder SYSTEM in excellent condition and very clean. Please see photos for specs. It is fully tested and is working perfectly in all aspects. It is used. So it does have a few very minor scratches and scuffs as would be expected for a very lightly used machine of this type. This machine is capable of both tig and stick welding(stinger not included) I believe it will also drive a MIG feeder. The 351 welder is secured to a cart which has been specially built for it and all its accessories. The tray above the welder(which holds the chiller) is made to be unbolted so that you can take the welder off the cart easily should you ever want to. Did I mention it's blue? The cart is very maneuverable and ... morekeeps all the hoses and cables organized and contained. It has chained holders for 2 standard size tanks and includes a new regulator. So. You can set it up for both steel and aluminum(and whatever other exotics you might be working with) It is currently wired for 220V. It is easily rewired to 440/480V. If you intend to use it on 480V. Please let me know. I will be happy to change it over. I may have a large Hubbell plug that I will be happy to throw in, too. =================================== In addition to all the standard features of the 351 Syncrowave. This welder has the optional PREFLOW/SPOT TIME controls as well as PULSER controls. =================================== This System consists of the 351 welder. With the options noted above, and also includes: A BERNARD Stainless chiller. Which has been completely rebuilt and has all new plumbing. A new 25 Foot 350AMP water cooled torch with nylon cover- I did some test welds with it-see photos) ALL 3 sizes of consummables including correct collets. Gas lens collet bodies, ceramic cups and new tungstens for each-1/8" 3/32" and 1/16" Also included: A 30 foot long. 2 GAGE POWER CABLE A 25 Foot 1/0 gage ground wi
Miller Maxstar 200 LX TIG/Stick DC Welder Power Source & Automation Interface
Lightly used not abused USA Miller Electric Welder. Miller Maxstar 200 LX TIG/Stick DC Welder Power Source With Automation Interface Connector- 903701012 Please look at the pictures and judge for yourself. This Miller Electric Welder USA made. DC Tig/Stick is in great condition. Lightly used not abused USA Miller Electric Welder. Miller Maxstar 200 LX TIG/Stick Dc Welder Power Source With Automation Interface Connector- 903701012 Please look at the pictures and judge for yourself. This Miller Electric Welder, DC Tig/Stick is in great condition. Made in the USA MSRP: $4.397.00 USA Miller Maxstar 200 LX TIG/Stick Dc Welder Power Source With Automation Interface Connector Includes: Maxstar 200 LX Welder Power Source 8 ft(2.4 m) primary cord(2) Dinse 50 mm connectors Adjustable shoulder strap 14-pin and 10-pin receptacle with mating plug. LX ... moremodel only Welding Capabilities Minimum welding thickness: 004" Steel. Maximum welding thickness: 1/4" Steel. Features Features Industry standard- Miller Electric pioneered the Maxstar-type market. Now we've perfected it. Maxstar 200 Series provides a solution for every user's needs; from simple to fully automated. Auto-Line provides state-of-the-art flexibility by automatically connecting to 120-460 VAC. Single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site. Portable in the shop or at the job site- at 37lb the unit is easily moved from location to location. Superior TIG/Stick arc performance on all input voltages. Even on the difficult-to-run electrodes like E6010. Low OCV Stick is a simple design that reduces open-circuit voltage to 9-14 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Inverter-based. DC power source has state-of-the-art operator interface allowing the user extra set-up capabilities in a compact machine. Features more precise control of output parameters than
Miller Welder Mixed Lot Of Engine Drive Parts LOT#1
Mixed lot of used Miller welder parts from various engine driven welding machines. Parts came from closed welding shop Please pay within 3 days of auction or item will be relisted. Will only ship to U.S. and Canada addresses. There is no warranty or guarantees on any new or used parts.
Hobart 135 Handler Mig Welder Flux Core Wire Welding
Built with Hobart quality& durability. The Handler 135 is MIG ready, no additional kit required. Operating on standard 115V household current, the Handler 135 is extremely versatile and perfect for the welder that wants to work on auto body, household repairs, or even farm projects that require extra welding power. A 5-position tapped voltage control selector gives you the ability to fine tune your arc offering a smooth stable arc on all thicknesses. Built with an industrial cast aluminum drive system and a heavy duty work clamp– the Hander 135 delivers a wire welding package with industrial performance. 120 Volt AC Input Compact Wire Welder Requiring common 120 volt input power. The Handler ® 1 35 can be used almost anywhere. With simple two knob control. The machine is easy to set up for gasless flux-cored welding for deep penetration ... moreon thicker steel or gas-shielded MIG welding on thin gauge steel, stainless or aluminum. Compare the precise drive, rugged construction and full list of standard accessories. the Handler 135 is an excellent choice! Heavy Duty Wire Drive Fully adjustable drive system reduces the chance of wire tangling and crushing. Brass-to-brass gun connection enhances conductivity. Durable cast aluminum gear box delivers added drive torque and quiet operation. Capable Performance Forgiving arc makes dialing in your application easy. Smooth arc starts with minimal spatter. Wide 30-1 35 amp welding output range. MIG weld 24 gauge up to 3/16 in. 4.8 mm) sheet metal in a single pass. Top Features Fully adjustable drive system reduces the chance of wire tangling and crushing. Brass-to-brass gun connection enhances conductivity. Durable cast aluminum gear box delivers added drive torque and quiet operation. Forgiving arc makes dialing in your application easy. Smooth arc starts with minimal spatter. Input Power 120/1/60 Processes MIG. Flux-Cored Applications Light Industrial Applications Maintenance and Repair Steel Erection Mechanical Contractors Dairy Industry Food/Beverage Industry Experim
Vaper Arc Welder Model No. BX6-8OB
Vaper Arc Welder Model No. BX6-8OB In good condition. 70 AMP. Comes with goggles and welding rods.
Ready Welder II Portable Mig Welder 2 Battery Powered
For a smooth transaction. It is VERY important that you read all of the info below before proceeding to the item info. If you would like insurance on this item. Please let me know at auction's end and I will send you an updated invoice. Insurance is $1.65 per every $50.00. Please understand that once I ship an item. It is out of my hands as far as how fast it arrives. Shipping on this item will be $25.00 to any of the 50 United States. I do not ship outside the United States for any reason. If you have ANY issues at all with an item you have won from me. Please simply contact me first so that I may have a chance to remedy the issue. Also, please be aware that certain procedures must be followed according to ebay rules and sometimes we must all be patient. ITEM INFO. This welder is used and works fine. It does not come with a battery.
Miller Welder Mixed Lot Of Engine Idlers And Modules
Mixed lot of used engine idlers and modules for various Miller engine drive welders. Parts came from closed welding shop Please pay within 3 days of auction or item will be relisted. Will only ship to U.S. and Canada addresses. There is no warranty or guarantees on any new or used parts.
MIller CP-300 & S-52 MIG Welder
If you have questions or need a shipping quote please contact us at 404-736-6494. Delivers dependable performance and productivity in more demanding semiautomatic applications. Combined with 22A wire feeder it makes this a“Good! simple. Entry-level industrial solution. Adjustable weld stabilizer(high-low inductance) provides the flexibility to produce the optimal arc characteristics. Solid-state weld contactor provides longevity to match the ultra-durable and reliable reputation of the CP Series. Presettable welding voltage allows you to easily set weld output before welding. Power efficiency gives exceptional value and return on your investment. Large analog voltmeter and ammeter for easy viewing. Process MIG(GMAW) Flux Cored(FCAW) Applications Industrial to Heavy Industrial Apps Metal Fabrication, Construction, Agri Equipment, Equipment/Auto ... moreManufacturing, Specifications Input Power Requires 3-Phase power, Rated Output 300 A at 32 V. 100% Duty Cycle, 390 A at 32 V. 60% Duty Cycle Open-Circuit Voltage 14- 44 Volts Net Weight 332 lb(147 kg)
Miller XMT 304 CC/CV Welder w/ Auto-Link
MILLER XMT 304 CC/CV w/ AUTO-LINK The auction is for used Miller XMT 304 CC/CV w/ Auto-Link. Works with 1- or 3-Phase power. Can be set up for MIG or TIG welding. As is. In good working condition.
MILLER AEAD-200LE CC AC/DC ARC WELDING GENERATOR WELDER
MILLER AEAD-200LE CC AC/DC ARC WELDING GENERATOR*SOLD AS IS. NO WARRANTY. NO GUARANTEE. MAY BE WORKING, BUT FOR PARTS/REPAIR. Serial: JE828066 Rated AC Output: 225 Amps@ 25 VAC. 100% Duty Cycle; 80 Max OCV, 3000 Max RPM Rated DC Output: 200 Amps@ 25 VDC. 100% Duty Cycle; 80 Max OCV, 3000 Max RPM Auxiliary Output: 120/240 VAC. 42/21 Amps; 5 KVA, 1860 Max RPM, 60 Hz 2683 Hours
ARCTRONIC 426 MMA ARC WELDER
ebay template B argain S urplus Report Description Info Info ARCTRONIC 426 MMA ARC WELDER. This item is untested and sold"as is" It has scuffs. Scratches and signs of heavy wear. Also, no cables, manuals or any other accessories are included. ITEM MUST BE PICKED UP LOCALLY OR YOU CAN SEND IN YOUR OWN FREIGHT CARRIER TO PICK IT UP. IT WILL BE PALLETIZED. Important Info: Hours of operation are M-F 7:30AM-4PM Eastern time. ALL PICKUPS MUST BE SCHEDULED AHEAD OF TIME AND PAID FOR BEFORE PICKUP. YOUR APPOINTMENT MUST BE CONFIRMED BY SOMEONE BY PHONE OR EMAIL BEFORE PICKUP. All items sold AS-IS unless otherwise stated. Returns. If accepted, are subject to a restocking fee if Bargain Surplus is not at fault for the return. The buyer agrees to pay for return shipping on an item. Please do not assume anything is included in this listing ... moreunless it is specifically stated in the listing. If you are unsure. Please ask. Feedback Policy- We work very hard to provide exceptional service to our customers and hope that you will be satisfied with our awesome deals. However. If you are disappointed for any reason, please contact us before leaving feedback in order to give us the opportunity to resolve your issue. Customer satisfaction is very important to us and we always strive for a satisfactory result. ALL PICKUPS MUST BE SCHEDULED AHEAD OF TIME AND PAID FOR BEFORE PICKUP We do not ship items on the weekend. Items are shipped in the order that payment was received. If you are paying for upgraded shipping. You should contact us to request that your item be moved up in line. Otherwise, it will ship in the order it was received. No PO Boxes. APOs or FPOs. WE DO NOT SHIP OUTSIDE OF THE US. IF YOU ARE OUTSIDE OF THE USA-DO NOT BID! We do not ship to US Territories. Only the 50 United States. WE NO LONGER SHIP TO CANADA. We do NOT ship USPS under any circumstances. Please do not bid expecting your item to ship by USPS. Please do not bother requesting USPS shipping. Items are eligible for pickup unless otherwise stat
ESAB MODEL 410 MIG WELDER
ESAB model 410 mig welder. set up with magnum 15ft. gun and 045 drive rolls. can be used as 480v or 220 3 phase. the machine was purchased new in 2011 and used very little. flow gauge is included with machine. there is no power cord with it. set up to handle 33lb. rolls of wire. runs great very clean unit. I would estimate the weight at around 300lb. welder sold as is no warranty
Leister Uniplan E Welder
No longer needed for our program use.
Miller Electric Gold Star 300SS DC Arc Welder
We have a total of 5 of the below machines. Each unit is priced at $350.00/ea. Contact us to purchase all 5 at $300.00 ea. Miller Gold Star 300 SS 15 to 385 Amp Constant Current PROCESSES Shielded Metal Arc Welding(Stick) Gas Tungsten Arc Welding DC(TIG) with optional TIG-RIG units) Submerged Arc Welding Stud Welding FEATURES Amp and Volt Meters Solid-state contactor SCR-silicon controlled rectifier Line voltage compensation Variable electronic arc control Remote contactor and current control via the 14-pin Amphenol receptacle. Standard/remote contactor and current control selector switch. Electronic amperage control Thermal overload protection High/low range selector switch Push-button on/off power switch with manual power failure reset. Pilot light. Shipping Local free pick-up is preferred at our store location in University Park. IL. Purchaser ... morewill pay for all shipping costs. Item will be shipped within one business day. Handling time varies depending on location. Questions? Contact Us! Please email info@weldstar.com. Or call with any questions Weldstar Company: Machines are located at our University Park location: Weldstar University Park: 1100 Hamilton Ave. University Park, IL• P) 708-534-8561(F) 708-534-7819 Visit Us At:
Lincoln DC-ARC Idealarc Welder (Stock #1279)
i000000. Lincoln DC-ARC Idealarc Welder(Stock#1279) Description: Howdy. You are looking at a Lincoln R3R-500 DC-ARC Welder. This welder is used but is in good condition. The overall size of this unit is 32 inches long, 28 inches tall and 23 inches wide. Other Specifications: Three phase 230/440 Volts 96/49 Amps 60/50HZ. Take a close look at the pictures and call with any questions@ 702-966-0194 or 702-448-3390 Thanks& have a wonderful day! Shipping: We encourage you to Call before you bid. And call if you have any Questions. Shipping: We are not responsible for shipping. But we will be happy to assist you in loading out. We have great loading facilities with forklifts and loading docks to assist in delivery and pick up. O wners and Operational Manuals: M ost of the equipment that we offer for auction is used. Typically these machines ... moredo not come with owners manuals. If we do have the owners manuals for the machine we will include it with the machine free of charge. Terms and Conditions We are a small reputable honest company. If you have any questions or concerns we are here from start to finish. Thank you for your participation and good luck bidding. Hey Life's full of choices let us help solve a few. Don't let this chance pass You up. We inspect each piece of equipment to the best of our mechanical ability. This listing has been prepared as a guide only. Based on the information that we have access to at this specific time. All of this information is believed to be reliable and accurate but is not guaranteed. Everything that is listed on auctions is free of liens and encumbrances. We will release the serial numbers to the winning bidder after the auction. Bid with confidence that you are buying quality equipment from a quality company. Payment: We Only accept Deposits made Via PayPal not to exceed $5000.00. The remaining balance must be paid in the form of cash. Or wire transfer of funds. The winning bidder must contact us within 24 hours via e-mail or PHONE call after the auction closes to make the
Electron Beam Welder Optics
It will be sold as is. CA sales tax applies to CA buyers. The"buy it now price" does not include tax. Shipping, and handling costs. Seller prefers PayPal. Thank you for your interest! Please email tomb@vpei.com or this eBay email with questions.
Large Lot Of Metco Type Metallizing Gun Parts Spray Welder Nice Tool Metal
Large Lot Of Metco Type Metallizing Gun Parts Spray Welder Nice Tool Metal. Large Lot Of Metco Type Metallizing Gun Parts Spray Welder Nice Tool Metal. This lot is in used condition with some wear as seen in pictures. This lot is sold as is for parts. Please view pictures to examine the item I am not an expert on metallizing. Please view all the pictures to confirm condition. If you have any questions. Please ask. No Reserve! Please check my other listings for more great items including more Metallizing guns and parts! Thanks for viewing our auction! Please add us as a favorite seller and subcribe to our newsletter! We post new auction often and have a great variety of collectible merchandise and other odds and ends that we typically start at really low prices. We buy abandon storage units and make the treasures we find available to you for ... morelow prices! We prefer the auction format with low starting prices so you can find some really great deals here! Hope to see you again soon! For more great items! 2nd Cents only accepts PayPal for eBay transactions. All payments are expected with 2 business days of a completed auction. If you can not complete payment within 48 hours of a completed auction. Please send us a message on when you will be making your payment. If you have any problems please contact us. Please read the Shipping Details for each auction! We ship using a variety of different size& weight items and use various shipping methods to get your package to you safely and at the lowest cost. Most Buy-It-Now items have free shipping. We may use calculated shipping for extremly heavy items. The majority of our auctions use calculated shipping. Shipping in the US is through the USPS or UPS. We only use Priorty Mail International for International Shipping. I will not ship via First Class International mail. Light auction items shipping via First Class Mail will be charged a flat fee of $3 or $4 depending on weight. I am always willing to arrange for local pickup if you are near the Cleveland Area. Almost ever
Lot Of Metco Type Metallizing Gun Tips Spray Welder Nice Tool Metal
Lot Of Metco Type Metallizing Gun Tips Spray Welder Nice Tool Metal. Lot Of Metco Type Metallizing Gun Tips Spray Welder Nice Tool Metal. This lot is in used condition with some wear as seen in pictures. This lot is sold as is for parts. Please view pictures to examine the item I am not an expert on metallizing. Please view all the pictures to confirm condition. If you have any questions. Please ask. No Reserve! Please check my other listings for more great items including more Metallizing guns and parts! Thanks for viewing our auction! Please add us as a favorite seller and subcribe to our newsletter! We post new auction often and have a great variety of collectible merchandise and other odds and ends that we typically start at really low prices. We buy abandon storage units and make the treasures we find available to you for low prices! ... moreWe prefer the auction format with low starting prices so you can find some really great deals here! Hope to see you again soon! For more great items! 2nd Cents only accepts PayPal for eBay transactions. All payments are expected with 2 business days of a completed auction. If you can not complete payment within 48 hours of a completed auction. Please send us a message on when you will be making your payment. If you have any problems please contact us. Please read the Shipping Details for each auction! We ship using a variety of different size& weight items and use various shipping methods to get your package to you safely and at the lowest cost. Most Buy-It-Now items have free shipping. We may use calculated shipping for extremly heavy items. The majority of our auctions use calculated shipping. Shipping in the US is through the USPS or UPS. We only use Priorty Mail International for International Shipping. I will not ship via First Class International mail. Light auction items shipping via First Class Mail will be charged a flat fee of $3 or $4 depending on weight. I am always willing to arrange for local pickup if you are near the Cleveland Area. Almost everything we list
Metco 41F Stainless Steel Alloy Powder Metallizing Gun Material Spray Welder Nic
Metco 41F Stainless Steel Alloy Powder Metallizing Gun Material Spray Welder Nice Tool Metal. Metco 41F Stainless Steel Alloy Powder Metallizing Gun Material Spray Welder Nice Tool Metal. This item is in used condition with some wear as seen in pictures. This item is still sealed. Please view pictures to examine the item I am not an expert on metallizing. Please view all the pictures to confirm condition. If you have any questions. Please ask. No Reserve! Please check my other listings for more great items including more Metallizing guns and parts! Thanks for viewing our auction! Please add us as a favorite seller and subcribe to our newsletter! We post new auction often and have a great variety of collectible merchandise and other odds and ends that we typically start at really low prices. We buy abandon storage units and make the treasures ... morewe find available to you for low prices! We prefer the auction format with low starting prices so you can find some really great deals here! Hope to see you again soon! For more great items! 2nd Cents only accepts PayPal for eBay transactions. All payments are expected with 2 business days of a completed auction. If you can not complete payment within 48 hours of a completed auction. Please send us a message on when you will be making your payment. If you have any problems please contact us. Please read the Shipping Details for each auction! We ship using a variety of different size& weight items and use various shipping methods to get your package to you safely and at the lowest cost. Most Buy-It-Now items have free shipping. We may use calculated shipping for extremly heavy items. The majority of our auctions use calculated shipping. Shipping in the US is through the USPS or UPS. We only use Priorty Mail International for International Shipping. I will not ship via First Class International mail. Light auction items shipping via First Class Mail will be charged a flat fee of $3 or $4 depending on weight. I am always willing to arrange for local pickup if you are near t
THERMAL ARC 300S THERMADYNE DC INVERTER 460/575V 20/25A WELDER B207571
Brand: THERMAL ARC Condition: Used Model: 300S Type: Welder Weight: 100 lbs Dimensions: 26 X 23 X 12 SKU: B207571 Additional Notes:
Lot of 2 Unitek Dental Lab Spot Welder 1071 115V, 60Hz, 2.5A
Lot of two Unitek 1071 Dental Spot Welders. Untested and being sold as is for parts. LOW starting price! Used condition. Please ask any and all questions before bidding. No International bidders. Please. Condition is described to the best of our ability. Only what is shown, described or reported will be expected and included in this auction. Due to the amount of items we list, it is not possible for us to test every function or application. If you have a specific question or test request, just ask. We will do our very best to accomadate your request. Items are sold as is unless otherwise stated. Because items are as is, we price accordingly and aim to be the lowest price on eBay. We do not accept returns because we have had too many parts scams. We photograph and catalog all serial numbers and boards. Don't bother trying to scam us. Buyer ... moreaccepts all responsiblity for Electrical safety Inspection, testing and calibration when applicable. Please check out our other items and add us to your favorites! w) Posted with the lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f16411aa7-0x101-
Greenlee 1531 Welder's Steel Storage Box 31" x 18" x 15"
$175 or Make an Offer. Greenlee 1531 SPECS• Capacity: 4.5 cubic feet• Height: 15" Width: 31" Depth: 18" FEATURES• Protects small tools and supplies. Single lock hasp for use with padlock. Compact side handles for easy portability. Heavy-duty hinges. Plus chain connector to hold lid in open position. Call Joel at 248-545-4404 with any questions*
1937 French Ad Commonwealth Mfg Corp Ohio Aladdin Arc Welder Welding Equipment
Commonwealth Mfg Corp Ohio Aladdin Arc Welder Welding Equipment Magazine Ad Description Original Magazine Print/ Advertisement Artist: Year publishing: 1937 Magazine: Guide des Importateurs(FR) Approximate overall Size(cm) 19 x 26.5 Approximate overall Size(inches) 7.48 x 10.44 Printed on the reverse: Yes Quality: The Ad is in very good condition. No tears. No creases, no water traces. Light bleed-through from the print on the reverse. Note: This is a single original print from a period magazine. Click to view supersized image One of a Kind Piece of the Past You are to buy a rare. Maybe unique item, unlikely to be seen elsewhere. In our store you will find antique Art prints. V intage Advertisements. P rinted P hoto images. Articles, Publications and other Print Ephemera. Mainly from the years 1880 up to 1960’s. With currently about 4500 ... moreitems and more to come each month you have a great chance to find what you need. All items are Original prints. Taken from period magazines, newspapers, almanacs, other periodicals or unique publications. They are not modern reproductions or digital copies. Most of them are older than two generations and hardly more than a few examples survived through the years. Many of them bear more or less the signs of the time. Some aging, foxing, handling wear, natural paper structure changing and wrinkling. You will find all necessary information in the item description. The images enclosed are with fine details and clearly visible eventual faults and/or defects. Allowing making you r own judgment. It may happen however. That the item you bought is not what you need, is not what you have expected or just you don’t like it. Don’t worry! We offer full money-back guarantee. We consider each case with great attention– just let us know and we shall find the best solution for both sides. We are aware of postal services“top speed” be sure. In case of return longer period will be agreed. If you consider that our price is too high you are welcome to send us your offer. Please note. T
Nawon USA Model RW2005 Ultrasonic Welder
NAWON USA MODEL RW2005 For Sale we have a NAWON USA MODEL RW2005 Ultrasonic Welder. Machine is complete with all parts and in good working condition. We have tested the machines on polyester material and they sealed fine. Each machine was purchased from a bullet proof vest manufacturer for cutting and sealing. It comes with the existing wheel or horn on the machine. I have taken pictures of most all the important information tags but please contact us if you have any questions. SHIPPING Shipping must be by freight and will be $175 to the lower 48 states to a commercial address or local terminal pick up. Will be an additional $80 if residential delivery is required.
Dukane 43A175 Ultrasonic Welder
DUKANE 43A175 For Sale we have a Dukane Ultrasonic Welder. Machine is complete with all parts and in good working condition. We have tested the machines on polyester material and they sealed fine. Each machine was purchased from a bullet proof vest manufacturer for cutting and sealing. It comes with the existing wheel or horn on the machine. I have taken pictures of most all the important information tags but please contact us if you have any questions. SHIPPING Shipping must be by freight and will be $175 to the lower 48 states to a commercial address or local terminal pick up. Will be an additional $80 if residential delivery is required.
Branson FS-90 Ultrasonic Welder
BRANSON FS-90 For Sale we have a Branson FS-90 Ultrasonic Welder. Machine is complete with all parts and in good working condition. We have tested the machines on polyester material and they sealed fine. Each machine was purchased from a bullet proof vest manufacturer for cutting and sealing. It comes with the existing wheel or horn on the machine. I have taken pictures of most all the important information tags but please contact us if you have any questions. SHIPPING Shipping must be by freight and will be $175 to the lower 48 states to a commercial address or local terminal pick up. Will be an additional $80 if residential delivery is required.
Thermal Arc (Thermadyne) ProWave 185TSW AC/DC tig stick welder w/ 80cf gas cyl.
Thermal Arc(Thermadyne Co. ProWave 185TSW AC/DC CC tig stick welder includes 80cf owner Thoroughbred argon gas cylinder welds all metals including aluminum rated 185 amps@ 30% duty cycle rated 160 amps@ 40% duty cycle rated 130 amps@ 60% duty cycle rated 100 amps@ 100% duty cycle 5-185 amp output range runs on 208/230 volt 40 amp single phase power weight = 49 lbs this is an inverter based machine- it has many more programmable parameters than transformer welders adjustable parameters 1) pre-flow 2) post-flow 3) initial current 4) background current 5) up slope 6) down slope 7) peak current 8) hot start 9) spot weld 10) crater current 11) pulse width 12) pulse frequency 13) AC frequency 14) wave balance YOU WILL GET THESE LISTED ITEMS ONLY: 1) AC/DC tig stick welder 2) WP-17 tig torch 3) ground cable w/ clamp 4) power cable w/ plug 5) gas ... moreflowmeter regulator w/ hose 6) foot amp control pedal 7) EMPTY 80 cubic ft. Thoroughbred owner compressed gas cylinder w/ cap 8) some start-up consumables(tungsten. Cups, back caps, collets, collet bodies, etc) 9) owner manual NO SHIPPING- I WILL NOT PACKAGE THIS ITEM LOCAL PICKUP BY THE BUYER ONLY. UNLESS PAID IN CASH CASH BUYERS WILL GET A BETTER DEAL ON WELDER welder is set up& ready to be tested Steve 386-308-3908
Snap On Mig Wire Fed Welder with Cart Tank YA219b
This is a Snap On YA219B Wire Fed 120v Welder with Cart and Tank. THIS WELDER WAS USED DAILY AND ITS IN GREAT CONDITION ALTHOUGH IT HAS NOT BEEN USED SINCE SHOP WAS CLOSED SEVERAL YEARS BACK. IT HAS BEEN STORED INDOORS ALONG WITH OTHER SHOP EQUIPMENT. THIS IS FOR LOCAL PICK UP ONLY. PLEASE DO YOUR OWN RESEARCH. THANK YOU AND GOOD BIDDING.
Lincoln Electric SP-125 Pjus Mig Welder & Jackson Hood NoReserve PICKUP ONLY
Click on any picture for better detail and a larger image. Terms and conditions are just as important as the item itself. Please read our terms below. Additional information provided by other eBayers may be listed at the bottom of this page. Please check to see if your question has already been answered. Lincoln Electric SP-125 Pjus Mig Welder& Jackson Hood NoReserve PICKUP ONLY The Mig welder and helmet that you are bidding on is used but in excellent working condition. Lincoln Electric SP_ 125 Plus with a Jackson welding helmet. More than one view is provided to show the construction and condition of these items. To the best of my knowledge it is complete and ready to use. This is not an area of expertise for me. So if you need more pictures and/or information ask early so that I can provide the best possible response. This is HEAVY. ... moreSo I am making it a pick up only item in Ormond Beach FL. Most of our pictures are fairly large in order to show maximum detail. They can take some time to load. But are well worth the wait. Occasionally you will see reflections of the camera or photographer on the piece. If you have any questions, please ask. Payment Terms: Payment is due within 4 days of the close of this auction. Invoices are sent by eBay to all customers. If you are the winner of multiple auctions in one day and pay individually before receiving a combined invoice we do not combine shipping or return the overpayment. Returns Policy: We do not offer partial refunds. All items are returnable. Buyer must notify us why the item is being returned and must return item within seven(7) days of post office delivery confirmation date of delivery and must use a trackable shipping method. Unless we have made an error and the item is not as described. Buyer pays all shipping charges plus 10% of the total purchase price restocking fee. All refunds will be made via PayPal. Customer Service: We answer all questions we receive; however. EBay does not deliver questions in a timely manner. Do NOT wait until the last hour. We
Lincoln Idealarc R3R 400 Welding Machine Welder
Lincoln Idealarc R3R 400 230/460 3 phase welder used for stick. Tig, and gouging applications. Includes ground lead Has never been used. Still has 1 year of warranty left. Posted with eBay Mobile 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13f19b95354-0xff-
LINCOLN IDEALARC CV-250 WELDER,LN7 FEEDER,TWECO # 2 GUN
Lincoln CV-250 power sourse and LN7 feeder and tweco# 2 mig gun.Gas bottle is not included(not mine!Wire feeder is on wheels and has 50 foot of leads;40 ft power cord.welds solid or core wire.Has a switch to change polarity.LN7 feeder is a 4 roll feeder.Can skid and load no charge-DON-909-641-2144
#SLS1H73 Taylor Winfield Spot Welder 100 KVA ENE-12-100 Medweld Control 14780SO
Taylor Winfield Spot Welder Used, Nice Condition, Very little use. Was a training aid, Type: ENE-12-100, Missing the welding tip, Missing the programmer, Missing a pressure switch cover, Water cooled, Air clamp cylinder, KVA 100, Volts 460, Hz 60, Sec Voltage High 9.15. Low 3.86, Short cir. sec. current 52.000, Amps at high secondary voltage with 12" throat by 8" gap, Solenoid voltage 110v-60hz, Model# 3015/93304, Part# 952-1090, Output 500va, 480 VAC 1 phase, 129.6 KVA, Hi/Low transformer, 8 Position selector on high or low, Medweld 3000s AC welding control, SLC 5/01 CPU with Medar module, Part# 937-0009V2, 36"x48"x74"H, 1000 lbs. no pallet, As is Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For a freight quote please send me your zip code and state ... moreif its a business address with a way to unload a semi trailer or residential address and you need a lift gate. Buyer pays all shipping expenses. Thank you. Return Policy Within 14 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return feight will be payed by the buyer and it must be returned in the same condition that it was shipped. Thank you Liability Seller makes no claims as to the equipments compliance to Starlight Supply Inc. Or any other safety standard, and is held harmless regarding any cost resulting from non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the handling or use of this equipment or items. It is the buyer's responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer's responsibility as to the safe handling and operation of this equipment or items Be sure to add me to your!
2005 ENGINE WELDER TRAILER BY LINCOLN ELECTRIC! LIGHTS IN TACT! LOCAL PICKUP
up for bid is 2005 ENGINE WELDER TRAILER BY LINCOLN ELECTRIC! LIGHTS IN TACT! LOCAL PICKUP BILL OF SALE ONLY! NO TITLE! fenders and light kit still in tact. With cable holder installed, decent trailer meant for engine driven welders LOCAL PICKUP ONLY nice handy unit. a contractor/rental grade tool. take a look at the pictures and decide. tired of renting? ready to own? very expensive new. all equipment is sold AS-IS WHERE-IS w/ no warranty. you can contact me TOLL-FREE 1-866-903-6300. canada call 330-359-6300 SHIPPING IS as follows pick-up is available On Nov-25-07 at 07:27:27 PST. Seller added the following information:
sa 200 lincoln welder continental manual f-162 f-163 sa200 miller ,hobart l-head
99 NO RESERVE! this real deal not copy or cd. THIS IS OVERHAUL MANUAL FOR THE F-162 and f-163 CONTINENTAL ENGINE.THERE IS 81 PAGES OF GOOD INFO! THAT COVER OVERHAUL THE ENGINE,TIMING THE MAGNETO,VALVE SPEC AND ADJUSTMENT,ALSO COVER SOME SIX CYLINDER ENGINE,THERE IS NO INFO ONTHE WELDER,JUST THE ENGINE,WILL TAKE PERSONAL CHECK,BUT NEEDS TO CLEAR THE BANK BEFORE SHIPPED THANKS HAPPY BIDDING!
NEC M801B2 Mini Laser Welder
NEC Model M801B2. YAG laser mini welder. Output power: 50W Wavelength: 1.06um Output energy: 50 J/pulse(10ms) Pulse width: 0.1-20 ms in.1 ms/step Six optical fibers. 4X 50ft and 2X 30ft long ea. Removable LCD touch control panel with 3 meter extension cable. Built-in visible guide beam. Comes with manual. Good condition.
Snap On Tools Mig Welder Master Parts Kit MPK-10
Powered by ~~Snap On Tools~~ Mig Welder Master Parts Kit MPK-10 Plastic Case Included Kit Includes: Nozzle Assembly O Rings Spot Nozzle Nozzle Body Contact Tips~.030. 3/64, 020-025, 035, 040-047 Insulators Cups Gas Diffusers Apears To Be Complete Set In Good Condition Comes From Pet Free Smoke Free Home Please See Photos For Full Description All items must be paid within 3 days after close of auction! If not paid. Buyer revokes all rights to item, the transaction will be canceled and the item will be relisted. We understand that occasionally things happen, if you can not pay within the time frame please contact us so we can make other arrangements. All California residents who purchase through us will be charged sales tax. I am required by the State Board of Equalization to collect this on their behalf. We currently accept payment through ... morePayPal only. All items are shipped parcel post or first class. If able. If quicker delivery is needed, please notify us so that we change the type of delivery and adjust your invoice if needed. Shipping prices are for the contiguous 48 states only. Packages are shipped within 48 hours of payment receipt(excluding Saturday/Sunday and Holidays) FOR INTERNATIONAL S/H CHARGES PLEASE CONTACT US AND WE WILL BE HAPPY TO GIVE YOU THE SHIPPING/HANDLING AMOUNT. IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING CHARGES. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRIES CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING/BUYING. THESE CHARGES ARE NORMALLY COLLECTED BY THE DELIVERING FREIGHT/SHIPPING COMPANY OR WHEN YOU PICK THE ITEM UP. WE DO NOT MARK MERCHANDISE VALUES BELOW VALUE OR MARK ITEMS AS GIFTS. IT IS U.S. AND INTERNATIONAL REGULATIONS. Returns are only accepted if item is not as described. We must be notified within 3 days of receipt of item. Description: WE WISH TO MAKE CLEAR TO POTENTIAL BUYERS THAT ALL ITEMS. NEW AND USED, ARE SOLD AS IS. We do our best to describe each item acc
Craftsman Century welder Tank holder Others Mig NR
Tank Holder. Removed from a Craftsman Century welder. should fit other welders. For small tank. Welder was working but the wire drive motor quit. Craftsman welder#20559 Century#117-084-002 I ship world wide Photo used in this template courtesy of the USAF.
Craftsman Century welder Power Cord Mig NR
Power cord. Removed from a Craftsman Century welder. Welder was working but the wire drive motor quit. Craftsman welder#20559 Century#117-084-002 I ship world wide Photo used in this template courtesy of the USAF.
Craftsman Century welder Wire spindle Mig NR
Wire spindle. Removed from a Craftsman Century welder. Welder was working but the wire drive motor quit. Craftsman welder#20559 Century#117-084-002 I ship world wide Photo used in this template courtesy of the USAF.
Craftsman Century welder Ground wire and clamp Mig NR
Ground Wire and clamp. Removed from a Craftsman Century welder. Welder was working but the wire drive motor quit. Craftsman welder#20559 Century#117-084-002 I ship world wide Photo used in this template courtesy of the USAF.
Craftsman Century welder Relay Mig NR
Relay removed from a Craftsman Century welder. Welder was working but the wire drive motor quit. Craftsman welder#20559 Century#117-084-002 I ship world wide Photo used in this template courtesy of the USAF.
Craftsman Century welder Mig Junction Block NR
Junction Block removed from a Craftsman Century welder. Welder was working but the wire drive motor quit. Craftsman welder#20559 Century#117-084-002 I ship world wide Photo used in this template courtesy of the USAF.
Craftsman Century welder Mig Fan Motor NR
Fan Motor removed from a Craftsman Century welder. Welder was working but the wire drive motor quit. Craftsman welder#20559 Century#117-084-002 I ship world wide Photo used in this template courtesy of the USAF.
Craftsman Century welder Mig Drive roller NR
Drive roller removed from a Craftsman Century welder. Welder was working but the wire drive motor quit. Craftsman welder#20559 Century#117-084-002 I ship world wide Photo used in this template courtesy of the USAF.
Craftsman Century welder Mig stinger NR
Mig Stinger removed from a Craftsman Century welder. Has cut in outer casing that will not affect the use. Could be taped or shrink wrapped no problem. Was working when removed Welder was working but the wire drive motor quit. Craftsman welder#20559 Century#117-084-002 I ship world wide Photo used in this template courtesy of the USAF.
Detroit Testing Machine Squeeze Tester Spot Welder
Looks to be in good shape e5b.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*b7g%3Ee5b-13f1a5731fc-0xf2-
Miller CST 280 Stick & TIG Welder 907244011 NO RESERVE
selling my used cst 280. Works great. Used this for my business i had back in 2009. I really have no use for it any more so selling it off. The case was just powder coated by my local powdercoater. Works great. Little dusty. Been stored inside its whole life. Back cover is missing that folds down over the rear voltage switch. Doesnt affect anything. Got bent so i just took it off. Any questions please ask. This auction is for welder and power cord only. selling with no reserve
Lincoln Electric Square Wave Tig Welder 275 Nema Class 2
Item Description: Lincoln Electric Square Wave Tig Welder 275 Nema Class 2! These tig welders are being sold seperatly but each one has a picture in the listing. They were pulled from a working environment and replaced for newer units. Each item has various form of wear and tare due from normal everyday use. Scuffs and minor scratch marks. One needs the wiring reattached but i have run out of pictures. It is the one that has the broken plastic for the amps. The wires are included with it. If you purchase one and have a preferance to which one you would like please contact us at the time of purchase so we can get you the correct one. The Square Wave TIG 275 is a constant current. Single range square wave AC/DC TIG(GTAW) arc welding power source with built-in high frequency stabilization. It also has stick(SMAW) capability. A TIG Pulser Kit, ... morePower Factor Capacitor Kit. And a Water Solenoid Kit are available as field installed options. The Square Wave TIG 275 includes advanced features such as Presettable Digital Meters. Auto Balance™, 2- Step/4-Step operation. Adjustable Down slope Time control and Fan as Needed. It also features Twist Mate connections for the electrode and work leads. In addition, fixed preflow and variable post flow timers are included to control the shielding gas. As well as the water flow when using the optional water solenoid. The Square Wave TIG 275 power source carries an IP21 environmental rating. It may be used in normal industrial and commercial environments. It is rated for use in damp. Dirty rain-sheltered environments Click to see the owners manual. IMPORTANT SHIPPING INFORMATION PLEASE READ: If interested please contact me for a shipping quote prior to purchasing the item. Be sure to include All of the following info; Is this a business or residence? Is there a loading dock? Full Name. Address, and Phone Number Dimensions 30"L X 21"W X 29"H Weight. 380 LBS. NMFC:133050-06. Class: 70. This item comes with a 30 day warranty so you can test out your new product. If we find
Miyachi MH-31AC Precision Spot Welder
Specifications Model MH-31AC Electrode force 49 to 274.5N(5 to 28kgf) Stepless adjustment Diameter of electrode φ8mm Drive method Pneumatic or foot step. 0.35MPa min. Stroke length 20mm Power requirements of solenoid valve 100/ 110/ 200/ 220VAC. 24VDC Air pressure 0.35 to 0.5MPa Weight 5.5kg
Draper 1695Td Turbo Arc Welder, Dual Voltage230/400V 50-60Hz
Draper 1695Td Turbo Arc Welder. Dual Voltage230/400V 50-60Hz ITEM IS USED IN GOOD WORKING ORDER. CONTACT No 07710 580267 DEAN. PLEASE CONTACT US FOR POSTAGE PRICES OUT SIDE UK MAINLAND
Continental 4 Cylinder Engine Magneto F-140 F-162 F-163 Lincoln Welder SA-200
this auction is for a working sparking fairbanks-morse magneto#type x 4b16a wires are included dirty and grimey may show light corrosion these parts are from a 1941 continental red seal f400 block f162 engine the engine was left sit with water in it ruining block and bottom end and valves these parts listed under my other auctions are what is left from this engine email me any questions and i will gladly answer them if interested i do also have the sheet metal from this. But just not listed
Welder AC/DC 230AC 180DC
This is a AC/DC electric welder complete with a 25 foot power cord. Uses 50 amps of 220 volts power. This welder is in very good condition and works great. If you win the bid and come to pick up the product and for any reason you are not satisfied. You don't have to buy it. Local Pick Up Only
Miller CST -280 Stick/TIG Welder #907244011 2012 MODEL
THIS 2012 MODEL HAS LESS THAN 20 HOURS USE AND COMES COMPLETE WITH STICK LEADS. TIG TORCH, FLOWMETER& HOSE. Miller CST 280 Stick/TIG Welder- 907244011 Process Stick(SMAW) TIG(GTAW) Applications Industrial Applications Power Plant Construction. Petrochemical Construction. Maintenance and Repair. Shipbuilding. Specifications Input Power Requires 3- or 1-Phase Power. Rated Output 3 ph: 280A@ 31.2V. 35% duty cycle. 3 ph: 200A@ 28V. 100% duty cycle. 1 ph: 200A@ 28V. 50% duty cycle. 1 ph: 150A@ 26V. 100% duty cycle. Welding Amperage Range 5- 200 Amps- 1 phase. 5- 280 Amps- 3 phase. Net Weight 41 lb(18.6 kg) CST™ 280 CST-280. 220-230/460-575, TWECO STYLE CONNECTORS Durable yet lightweight Stick/TIG welding power source designed for construction industry. 280 amps of output is ideal for stick electrodes up to 3/16 in and TIG welding pipe and ... moreplate. Easy voltage changeover between voltage ranges through a two-position manual switch. Conveniently located on the rear panel. It simplifies voltage change in racks. Simple to operate with a process selector knob which automatically sets the proper dig setting on E6010 and E7018 electrodes providing superior stick performance. Lift-Arc™ start provides arc starting without the use of high frequency. Fan-On-Demand™ cooling system operates only when needed providing power efficiency and noise reduction. Stand-alone or rack-mounted for construction sites. Optional 4-pack racks. Commonly used in construction and shipyards, are available for multiple operator applications. All controls including the power switch are located on front of the machine for easy access. Compatible with Wireless Remote Controls. Improve productivity. Eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Remote amperage control provided through 14-pin receptacle on front of the machine. This permits use of standard amperage control devices. Adaptive Hot Start™ for St
MILLER PORTABLE SPOT WELDER WITH TIMER, STAND, FACE SHIELD, GLOVES, & MANUALS
MILLER PORTABLE SPOT WELDER WITH TIMER. STAND, FACE SHIELD, GLOVES, AND MANUALS. WORKS GREAT. IN VERY GOOD CONDITION. HOOKED UP AND WORKING. LMSW-52T SERIAL# KE601652 220 V 1 PHASE 50/60 HZ WELDER. KE-14 220 V 1 PHASE 50/60 HZ TIMER. LOCAL PICKUP ONLY. IF YOU HAVE ANY QUESTIONS. PLEASE CONTACT ME.
Snap On YA219 120V Mig Welder (Not Working)
Up for sale is a Snap On YA219 120V Mig Welder. This welder will come and it will weld. All the welder does is melt the wire. It will not penetrate. The wire just piles up on the metal. It was welding fine and all of a sudden it just started piling up. I have not had the welder looked at so this is all I know. It is being sold as is for parts or repair. The welder runs off of 120volts-PRI Amp 20-10-60Hz-Kva 2.4-sec-volt-19-Sec-Amp-90-Duty Cycle 20%Max. O.C.V.32, and the model is 117-022. It does have A line for Argon. The Whip is in good working condition, it does have small nicks in the line nothing to talk about. The liner is good condition. The ground clamp is also in good condition. It comes with a over half full roll of flux wire. Feel free to ask any questions. Thank you for viewing.
LINCOLN SAE 300 6 CYL WELDER **PARTING OUT** 2204 HOURS CODE 3213
THIS IS AN OLDER UNIT AND PARTS ARE HARD TO FIND SO I AM PREPAREDTO STRIP AND CLEAN EACH PART AS NEEDED. PRICE MENTIONED IS NOT FOR THE COMPLETE UNIT.THIS UNIT IS BEING PARTED OUT. OTHER PARTS AVAILABLE. I WILL REFURBISH EACH PART AS NEEDED SO PRICE REFLECTS THAT WORK. NO PAYPAL ON THIS LISTING. NO RETURNS. CALL JEREMIAH 3102930615 EXAMPLE PRICES. FUEL TANK IS $350 PLUS SHIPPING RADIATOR IS $200 PLUS SHIPPING SHEETMETAL IS GOOD NO DENTS AND WILL BE SANDED AND PRIMED TOP COVER $400 PLUS SHIPPING EACH DOOR $225 PLUS SHIPPING RADIATOR COVER $275 PLUS SHIPPING CONTROL PANEL INCLUDING RHEOSTATS ETC PLEASE LOOK AT PICS I CAN SEND MORE ON REQUEST. LINK TO MANUAL THIS UNIT WAS STORED COVERED FOR SOME YEARS AS THE CONTINENTAL MOTOR HAD ISSUES 2012 HOURS. I HAVE ESSENTIALLY SCRAPPED THE ENGINE BLOCK BUT MAY STILL HAVE SOME ENGINE PARTS. ALL SHEETMETAL ... moreIS IN GOOD CONDITION GOVERNOR IS IN GOOD CONDITION I CAN TAKE MORE PICS PLEASE UNDERSTAND NO RETURNS ON ANY PARTS. IF YOUR LIKE MYSELF YOU WILL MAKE IT WORK. TAKE A LOOK AND GIVE ME A CALL IF YOU NEED A PART FROM THIS UNIT I WILL SHIP AS CHEAP AS POSSIBLE AND SELL AT BEST PRICE POSSIBLE FOR MY TIME AND EFFORT THX FOR LOOKING LOS ANGELES AREA 310 293 0615 JEREMIAH SORRY NO INTERNATIONAL. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f1c1d0a22-0x101-
200-WSE Tig Welder w/ Pulse LUXOR same as RILAND
10-200 Amp Inverter Tig Welder TIG200-WSE w/ Pulse There is a slight issue with this machine. When the knob is turned. The numbers go up from 16 to 85 but no higher. Other than that the machine is in good working order. TIG-200WSE(Tig200P) 1Phase 220vac input. P for Pulse feature. The Tig200WSE is our best machine for diverse Tig welding. It features AC& DC at a range of 10-200amps with Digital LCD display to show your exact output current. It will allow you to weld practically any metal including moly. Iron, titanium, copper and aluminum with ease. The foot pedal varies the current and is made to last. All twist connectors and cables are rated above 200amps to make them last and give you a high 60% duty cycle! This is the Tig welding machine for any small or big business. Perfect for aviation. Automotive or manufacturing. All at a price ... morethe hobbyist can afford. Beginners love the ease of use and wave shape diagram on the panel, Experts love the consistency and high duty cycle. This is a very compact and efficient TIG welder utilizing inverter technology capable of outperforming it's competition.ie: HTP. Miller, Hobart, Thermal Dynamics, Blue Point, Lincoln& Hypertherm. TIG-200 ACDC(Tig200ACDC) 1Phase 220vac input. This is a very compact inverter TIG welder capable of outperforming it's competition.ie: HTP. Miller, Hobart, Thermal Dynamics, Blue Point, Lincoln& Hypertherm 220vac 50/60HZ Input Single Phase 1PH 200amp weld draws 20amps at 4.5KVA 120amp weld draws 12amps at 1.9KVA 8ft power cord 16ft torch cord 10ft ground cord Internal 2X High Speed cooling fans for long life Has built in Thermal& Overload Protection Weight: 44LBS(64LBS Boxed) Dimensions: 19"Length X 12"High X 13"Wide Used once. 505-227-3955 call if you have any questions
MILLERMATIC 252 MIG WELDER AND TANKS
Up for auction is a millermatic 252 welder with tanks in perfect working order no reserve. If you have any questions feel free to ask thanks for looking and bidding. Posted with 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13f1c1d0a02-0xff-
LOT (5) Vintage Welder BEANIE Skull Hat Caps
LOT(5) Vintage Welder BEANIE Skull Hat Caps Some are clean… some need cleaning. Green and yellow are the colors. Packers or John Deere! All are size Medium. Please see photos and ask questions if needed before bidding. Combined shipping is available when possible/practical.
DUKANE ULTRASONIC GENERATOR 10A321B WELDING SYSTEM WELDER
DUKANE ULTRACOM ULTRASONIC GENERATOR Model: 10A321B Unit trips my 110 breaker when I turn the power on. SELLING"as is" Comes with 1 Male/Female Cables 702.595.9491 Paypal. Visa, MC, Amex, Discover accepted. Shipping via USPS or Fed Ex Ground in the 48 US States. ALL ORDERS OVER $100 Insured and Signature Required. WE COMBINE SHIPPING ON ALL ORDERS(if possible) AK. HI, INTERNATIONAL email for a quote before you bid!
Lincoln 255 Square Wave Tig Stick Welder W/ Pulser ACDC 220v 1ph Bernard Cooler
Used Lincoln 255 Square Wave Tig Stick ACDC welder with high freq. and pulser on factory cart. Includes water cooled torch with cover. Bernard V35 cooler with new pump, foot control, and regulator. This welder is 220v 1ph. It welds good, all functions seem to work fine. Outside has some scrapes and scratches. This piece can be picked up from my shop which is 10 miles south and east of downtown Saint Louis. Missouri in Illinois. Buyer to pay actual UPS ground shipping in the US. Please check out my other auctions. Thanks for looking. This item is for sale locally. So the auction may be cancelled due to a local sale. Please read our feedback. 100 percent customer satisfaction is our goal. Payment to be received within 7 days of the end of auction to avoid neg feedback. Items are described as accurately and honestly as I can but are sold as ... moreis unless otherwise specified. So please ask questions. Due to items not being picked up in a timely manner: Machines that are being picked up will be stored free for 14 days. buyer will be charged $10 per week there-after for storage unless prior arrangements are made. Items not picked up within 60 days will be resold. Please do not bid unless you intend to pick up your item in a timely manner. Posted with
Lincoln Electric LN-7 & GMA WELDER OPERATORS MAINTENANCE MANUAL WIRE FEEDER
LINCOLN ELECTRIC LN-7& LN-7 GMA WIRE FEEDERS(2& 4 ROLL MODELS) OPERATING MANUAL THESE MANUALS ARE IN EXCELLENT CONDITION. LOOKS LIKE IT HAS NEVER BEEN USED. ALSO INCLUDES ALL ORIGINAL PAPERWORK. OVER 100 PAGES. FORM NO. IM351-C. PRINTED JULY 1996. COVERS: INSTALLATION. OPERATION, ACCESSORIES, MAINTENANCE, TROUBLESHOOTING GUIDE, WIRING DIAGRAM, PARTS MANUAL FOR MACHINES WITH CODE NUMBERS 9100 AND ABOVE. I WILL COMBINE SHIPPING IF YOU BUY MULTIPLE ITEMS. I ONLY SELL ORIGINAL MANUALS. NO ILLEGAL COPIES HERE, WILL SHIP OUTSIDE OF U.S. ASK FOR A QUOTE. PLEASE CHECK OUT MY OTHER ITEMS. THANKS FOR LOOKING.
Lincoln Electric LN-25 WELDER OPERATORS MAINTENANCE MANUAL WIRE FEEDER CV CC
LINCOLN ELECTRIC LN-25 PORTABLE CV/CC(CONSTANT VOLTAGE OR CONSTANT CURRENT) SEMIAUTOMATIC WIRE FEEDER OPERATING MANUAL THESE MANUALS ARE IN EXCELLENT CONDITION. LOOKS LIKE IT HAS NEVER BEEN USED. ALSO INCLUDES ALL ORIGINAL PAPERWORK. ABOUT 100 PAGES. FORM NO. IM620. PRINTED APRIL 2003. COVERS: INSTALLATION. OPERATION, ACCESSORIES, MAINTENANCE, TROUBLESHOOTING GUIDE, WIRING DIAGRAM, PARTS MANUAL FOR MACHINES WITH CODE NUMBERS: 10556. 10557& 10558 I WILL COMBINE SHIPPING IF YOU BUY MULTIPLE ITEMS. I ONLY SELL ORIGINAL MANUALS. NO ILLEGAL COPIES HERE, WILL SHIP OUTSIDE OF U.S. ASK FOR A QUOTE. PLEASE CHECK OUT MY OTHER ITEMS. THANKS FOR LOOKING.
Lincoln Welder Tig 300/300 - probably works
It's missing the back cover but includes a foot pedal. Electrode holder and torch. This was my Dad's, he last used it over 3 years ago. It's been sitting in the garage since then. He had done some work on it and it was running it but I don't know that it's working now. We took out the 220 outlet so I have no ability to check. Could be good for parts too. Model TIG-300/300 Code No: 7007-C.
Sunstone Engineering CD160DPM2 Welder Power Supply
Part Number: CD160DPM2 Description: You are bidding on this Used. Sunstone Engineering CD160DPM2 Welder Power Supply” this welder was pulled from a working Environment. And comes with a full, 30 day Warranty. Please if you have any questions about this item or any of the many others we have listed just let us know. Manual Included. The Specifications can be seen in the following: Length 12 in Depth 13.5 in Height 10.5 in Weight 31 lbs Dual Pulse operation removes surface inconsistencies and contaminants, Single or Dual Pulse operation, Infinitely adjustable pulse width, Up to 600 welds/min, Intuitive user interface, Copper aluminum and brass thin sheet and wire, Miscellaneous resistive applications, For shipping within the US please see(Shipping and Payment details) on the bottom of this auction page and read our(U.S. Shipping) blurb below. ... moreFor buyers outside of US use the Ask Seller A Question link at the top of the page. General Info Newport Trading LLC. ships worldwide(US and International) We will ship within three business days. All shipments with sales totaling in excess of $1000.00 will be insured for 70¢ on the dollar by us. Buyer pays all shipping charges. Shipping& Handling Fee Shipping& Handling prices include our time to pack your item. As well as the materials, including boxes, Insta-Pack, peanuts, bubble wrap or whatever your item requires to arrive to you safely. U.S. Shipping Our stated shipping fee for the U.S. is for the lower 48 states. If you like in Hawaii. Alaska, or other U.S. Territories please contact us for a shipping quote. You are welcome to use your own carrier to pick up and ship your item, after item is paid for. There is a $50 fee to cover time and materials to pack your item, this fee applies only if you are arranging you own shipping, this fee is already part of the listed shipping charge. We can not ship to a PO Box. This item will require shipment via a freight carrier due to either weight or dimensions. Please contact us for a shipping quote prior to bid or purcha
50 Amp Arc Welder Sears 115 Volt
I got this at an estate sale and it doesn't look as if it has ever been used. It comes with some welding sticks and tools for the mask. There is a lot of copper inside the actual machine that looks very good(like never been used) If it has been used it has been gently used. Please feel free to ask any questions about it. Please check out my other listings for more collectibles!
Dukane 91394 43A255 82624 Ultrasonic Welder
Dukane 91394 43A255 82624 Ultrasonic Welder Dukane 91394 43A255 82624 Ultrasonic Welder Model 91394 43A255 82624 Item is for parts not in working condition. Insurance is included in the handling fee. When purchasing an item requiring freight shipping contact us for the freight cost before paying for the item. If the buyer requests to have a transaction canceled a 15% restocking fee will be charged. Once the item is purchased the buyer is responsible for the item cost and all shipping charges. Visit my Ebay Store at. Www.davesindustrialsurplus.com All items are for sale locally so we reserve the right to end any item. Shipping Items shipped within 3 business days after cleared payment has been received. We reserve the right to ship by the carrier of our choice. Items shipped UPS will be covered if under $100. Larger items will be shipped via ... morefreight. Contact us for a quote. A $20.00 pallet fee will be included with your quote. INTERNATIONAL OVERSIZED- For oversized international shipments. Contact us for a quote prior to bidding. Customer Service Items have been tested when possible. Seven day"no questions asked" return policy. 15% restocking fee may apply. Shipping is non-refundable. Return shipping costs are the responsibility of the customer. If item does not function as described call 419-445-1111 for an RMA(Return Merchandise Authorization) If you have questions or concerns contact our office at 419-445-1111 Mon-Fri 8:00AM- 4:00PM EST or Call Dave at 419-551-7874 from 4:00PM- 8:00PM EST Mon- Fri and from 9AM- 8:00PM EST on Sat& Sun, Product Use and Suitability Many states and localities have codes and regulations governing sales. Construction, installation and/or use of products for certain purposes, which vary from place to place. While Dave's Industrial Surplus attempts to assure that the products it sells comply with such codes, it cannot guarantee compliance, and cannot be responsible for product installation or use. Before purchase and use of a product, please review the manufacturer’s
Pressure Gauge for Argon Welder GCE Group Dental Lab
Buy With Confidence Product Details Pressure Gauge for Argon Welder GCE Group Dental Lab Argon Welder Gauge Printed on back: Ar Class 200 bar D7GA HP Slightly used. THANK YOU, durango-onlineoutpost Visit our store! PAYMENT We accept payment through PayPal. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 4 days of the close of auction. Please contact us before you bid if you will need more time to make your payment. If payment isn't received within 4 days and you have not contacted us. The auction will be revoked and a Non-Paying Bidder alert will be filed. SHIPPING Packages are usually shipped within 1 business days of payment receipt(excluding Saturday/Sunday& holidays) Shipping costs for all orders can be determined by the shipping calculator ... morein this auction. All orders are shipped via UPS or USPS. International buyers, please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. Shipping insurance is provided with all orders. Any item over $250 will be shipped with a required Signature Confirmation. Online Outpost RETURNS You have 14 days to contact us to arrange a return. You will receive a money back refund for the purchase price. But we are unable to refund shipping fees. ABOUT US | | | | Us Inventory and Consignment Software Solution
15 KVA AMES WELD SPOT WELDER,24" ARMS, COOLANT, TIPS
SquareTrade © AP6.0 THIS IS A 15 KVA SPOT WELDER MFG BY AMES WELD. HAS 24" COPPER ARMS, EXTRA TIPS AND COOLANT. RUNS ON SINGLE PASE 230, SER 279, WITH COOLANT IN GOOD OPERATING CONDITION. WIRED 230V/1/60. STILL IN SHOP UNDER POWER. LOCAL INSPECTIONS AND PICK-UPS ARE WELCOME WEIGHT 1000 LBS. ANY QUESTIONS CONTACT GERRY BY E MAIL OR 727-547-0616 On Aug-02-11 at 21:26:21 PDT. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Craftsman Century welder Transformer and Rectifier NR
Transformer and rectifier removed from a Craftsman Century welder. I left the whole thing wired together as it is hard wired. Welder was working but the wire drive motor quit. Craftsman welder#20559 Century#117-084-002 I ship world wide Photo used in this template courtesy of the USAF. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13f22712016-0x10b-
Craftsman Century welder circuit board with controls NR
Circuit board removed from a Craftsman Century welder. Includes controls and wiring. Welder was working but the wire drive motor quit. Craftsman welder#20559 Century#117-084-002 I ship world wide Photo used in this template courtesy of the USAF.
WESTINGHOUSE WSH-400 WELDER 400 AMP
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 04130770460 Manufacturer: WESTINGHOUSE Description: WESTINGHOUSE WSH-400 WELDER 400 AMP Capacity: 400 AMP Model Number: WSH-400 Serial Number: Additional Information: BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing– BE SURE TO INCLUDE YOUR EMAI
DENTAL Electro polisher and welder
Electro polisher and welder both turn on but no way of testing seem to work but cant test. Posted with
CHROME " PAPER WELDER " STAPLER PAT 178828 MEDINA, N.Y. MADE IN U.S.A.
CHROME" PAPER WELDER" STAPLER( NO STAPLES REQUIRED) STAMPED UNDER HANDLE: PAPER WELDER" DES PAT. 178828 MEDINA. N.Y. MADE IN U. S. A. CORK BOTTOM AS SHOWN 4 1/4" HIGH X 2" WIDE X 5 1/4" LONG IN EXCELLENT CONDITION
LINCOLN RANGER 8 225 AMP 8000 WATT GASOLINE WELDER GENERATOR
LINCOLN RANGER 8 225 AMP 8000 WATT GASOLINE WELDER GENERATOR Guaranteed in good working condition! Why spend thousands on a new model generator when you can have this lightly used generator-guaranteed in good working condition-for a fraction of the price? Bid a bunch! Model: Ranger 8 Code: 9972 Serial: U1951009331 Hours: 1025.3 Hours Welder Output: CC: 225 Amps AC@ 25 V. 100% Duty Cycle; 210 Amps DC@ 25 Volts, 100% Duty Cycle CV: 200 Amps DC@ 20 V. 100% Duty Cycle Auxiliary Power: 8000 Watts@ 100% Duty Cycle. Single Phase, 60 Hz; 4 x 115V Receptacles, 1 x 115/230V Receptacle Engine: Onan Performer 16 HP Gasoline Engine
MILLER CP-300 MIG WELDING WELDER WITH 30-E WIRE FEEDER
MILLER CP-300 MIG WELDING WELDER WITH 30-E WIRE FEEDER*SOLD AS IS. NO WARRANTY. NO GUARANTEE. MAY BE WORKING, BUT FOR PARTS/REPAIR. Serial: JC598274 Input: 230/460V. 33/16.5A; 12.3 KW; 3 Phase, 60 Hz Output: 300A@ 32V. 100% Duty Cycle; 44 Max OCV Comes Millermatic 30-E Wire Feeder and connector cable.
L-TEC 225 Mig Welder
Selling an older L-TEC 225 Mig Welder. The gun needs to be changed. This one is damaged beyond use. You can buy the 15' Euro style Tweco gun on ebay for $159. My welder includes the spool of wire seen in photo and a large tank. Welder is on some cart with wheels to push it around your garage. The tank has no regulator and not seeing any markings on it. So honestly don't have details. The welder has new 220V connector installed. Come over with pickup truck and bring cash. Not shipping and don't want to accept other forms of payment. cashola. US GOVT ISSUED green stuff. Machine is being sold locally as well. If you have questions, just come over here and inspect machine yourself. I'm not too far from I-84 and I-87(NYS Thruway) Thanks for not wasting my valuable time.
Used Millermatic 140 Auto-Set Mig Welder with Miller cover, gloves, and hammer
This is a lightly used Miller Might welder. It runs on 115v and has a maximum power output of 140 amps. Great unit that is still under warranty(bought March 2012) Works perfect. I have about 10 hours welding time with it so the price fits its gentle used status. Posted with
ESAB MIGMASTER 250 MIG WELDER TYPE MM250
ESAB MIGMASTER 250 MIG WELDER TYPE MM250? ESAB MIGMASTER 250 MIG WELDER ST-23A SPOOL GUN TYPE: MM250 SERIAL NO: MBCJ329043 STOCK: 32851 VOLTAGE: 288- 230 AMPS: 71/ 62 HZ: 60 30A/ 12V-280A/ 24V OVERALL MEASUREMENTS: 19" x 40" x 32" TALL PLEASE CALL FOR WEIGHT LOADING FEE: $25 WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: ITEM WILL BE SHIPPING FEDEX FREIGHT. Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or ... morehaving a friend pick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. 1MachinerySales.com ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif. 91746, Tel: 626) 330-4647, ALL BUYERS MUST CALL BEFORE PICKING UP ANY ITEM, open at 8am to 3:30pm& Closed from 11am-12pm(lunch) e-mail: ITEMS OVER $15.000.00 Prior to placing a bid of $15.000.00 or more buyer requires verification of payment status which could be credit card or any other alternative means. Copyright 2004. 1MachinerySales.com. All rights reserved. a pretty image. with Vendio Research. Vendio provides powerful selling automation for sellers of all si
ESAB MIGMASTER 250 AMP MIG WELDER *SINGLE PHASE*
ESAB MIGMASTER 250 AMP MIG WELDER*SINGLE PHASE* ESAB MIGMASTER 250 AMP MIG WELDER SINGLE PHASE SERIAL NO: MA-I523113 P/N: 32851 INPUT VOLTAGE: 208/ 230 HZ: 50/ 60 AMPS: 71/ 62 OUT 56 OCV 27 V AMPS: 250 MADE IN U.S.A OVERALL MEASUREMENTS: 19" x 40" x 32" TALL PLEASE CALL FOR WEIGHT LOADING FEE: $25 WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. NO FREE SHIPPING andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: ITEM WILL BE SHIPPING FEDEX FREIGHT. Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are ... morepicking up the item or having a friend pick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. 1MachinerySales.com ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif. 91746, Tel: 626) 330-4647, ALL BUYERS MUST CALL BEFORE PICKING UP ANY ITEM, open at 8am to 3:30pm& Closed from 11am-12pm(lunch) e-mail: ITEMS OVER $15.000.00 Prior to placing a bid of $15.000.00 or more buyer requires verification of payment status which could be credit card or any other alternative means. Copyright 2004. 1MachinerySales.com. All rights reserved. a pretty image. with Vendio Research. Vendio provides powerful selling automatio
Tig & Stick Welder 130amp DC Inverter 2 in 1 With FREE Argon Flow Regulator
Up for Bidding is one Chicago Electric Welding Systems Inverter Tig/ Stick Welder. 130amp tig output. 90amp Stick output with"lift start High Freq" 1. Advanced MOSFET inverter technology. High working efficiency, DC output; 2. Compact structure. Convenient to carry, reliable and durable, easy for maintenance; 3. Multi-function of TIG and MMA welding. 4. Currently set up for 220 v input voltage. 5. Air cooling. Thermostatic protection. 6. Complete accessories: welding torch. Welding holder, earth clamp, Tig Argon regulator, Stainless steen and mild steel welding rod Bidd with Confidence. Check out my feedback. If you are not happy with this welder you can return it for a full refund(less shipping) Flat rate shipping is for the lower 48.
Lincoln K2343-1 Eagle 10,000 Plus 9kW Welder Generator Kohler V-Twin Gas Engine
Lincoln K2343-1 Eagle 10.000 Plus, Generator for welding& other applications Condition: Excellent. Has some marks, stains, scratches from use but great operationally Electric power output. 9.0 kW, with Kohler V-Twin gas motor We will freight ship to the lower 48 US States for Free. Outside those areas. You can arrange your own shipment or we can get you a freight quote, 760) 822-3915, kirk@vrominc.com. Weight: 300 lbs with Pallet. Pallet dimensions: 60" x 48" x 36" Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
Slater Dryer, welder, compressor, receptacle
Slater dryer plug.Connector, receptacle small piece of case missing off rear will not effect operation
Leviton 60 Amp 250 volt Dryer, welder, compressor, receptacle
Leviton dryer plug.Connector, receptacle
Laramy Plastic Welder, Stick Welding Unit, Self Contained
This is a stand alone. Hot air, plastic stick welder, the system has torch heater control, air compressor, pressure guage, and all intra system connections in a single box. Requires 110VAC, pulg it into a wall socket, turn the system on, let the torch warm up and you are ready to weld. This package includes the instruction manual, one new replacement torch heating element still in the box, one used replacement torch heater element in the lid(functionality unknown) and the torch heater element in the torch. The torch heater element has had to be replaced only one time in 20 years. There is the regular torch with tip and one speed welding tip. The package also includes about 10 pounds of plastic welding sticks, pvc in 1/8" and 3/16" diameter, and around a pound of polyprop, 3/16" diameter, all welding sticks approach 40" ... morelenght.
Branson Ultra Sonic Welder, 9001W+ Series, 2 Horns with fixtures and Table
Branson Ultrasdonic Welder. 9001W+ Series, two power horns, part fixture, work table is adjustable tilt type, factory manuals included, fully operational. The table comes with it as part of the total package. This unit can be put on a pallet and shipped freight. On Jun-08-13 at 12:42:54 PDT. Seller added the following information: Model Number has been incorrectly stated in listing title. The correct model is 910 iw+ Series.
Sealomatic 10KW 27.12 Megecycle RF Welder 1000 FS 40 Voltage 460 Kabar
Industrial parts are us Quality new and used industrial parts at an affordable price! Sealomatic 10KW 27.12 Megecycle RF Welder Model# 1000 FS 40 Voltage 460 VAC 3 Ph, Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image Click to view supersize image This is a USED Sealomatic 10 Kw RF Welder. This unit is identical to the Thermotron. And Kabar RF Welders. We padded the Vacuum Tube during shipping ... moreto prevent damage. The platen is 36" wide and 25" deep. The nameplate states the voltage as 550 Vac but a transformer has already been installed to bring the voltage down to the standard 460 VAC 3 Phase. This unit is in good condition and ready to ship. Be sure to check out our other listings! INDUSTRIAL PARTS R US INC. will guarantee all items for 30 days from the date of delivery(see our terms and conditions) We have a great feedback rating and a history of excellent customer service! On Sep-04-12 at 10:10:20 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
Welder Spool Attachment
Spool unit for welder Posted with
Keystone BS308 308 Digital Capacitor Discharge Stud Welder
Keystone BS308 308 Digital Capacitor Discharge Stud Welder Keystone BS308 308 Digital Capacitor Discharge Stud Welder. Very Nice condition. I do not have a gun or cables for it. This auction is for welder only. Check out my other items. I can combine shipping. Buyer pays shipping thru UPS Ground. Thanks Your business is appreciated. I try my best to answer all questions in a timely manner. Please remember to ask questions before you bid. If for some reason you are not happy with something, please let me know and I will do my best to remedy the situation. Most of the time I ship the day payment is received. Thanks Donny Another auction from donnys stuff Powered by
LincWelder 225 ac Generator dc Arc Welder Portable Onan lincoln Engine Driven
Description Description: Engine driven welder just came out of storage. New plugs. Breather, and batteries. Cranked right up and run a good bead. She runs perfect. Idles down properly and generator gives proper power to power outlets. She will do what you need her to do. Onan CCKA Motor 2 Brand new group 51 Kirkland Cosco Batteries. Last ones lasted 11 years. Comes with leads Mounted to cart. Its ready to weld. Due to the weight of this puppy. I have no idea how to handle shipping it. I am asking for local pick up only. Unless you can work something out for transport. I will pay the shipping. Have fun bidding! Buy with 100% confidence! See our Feedback History We strive for 5-star ratings and to satisfy each and every customer. Item must be returned within 14 days after you recieve it. Thank you for your interest. God Bless. Please see our ... moreother items