In 
 
Order by: 
Available to: 
Price: 
 - 
$
10.60
Buy It Now
Free Shipping
Condition: Neu
Location: China
Miller Water quick fitting Hose connector FIT Plasma cutter Torch and TIG Welding Torch Quantity: 1 SET Summary Of Our Selling Policies Shipping Detail ... moreShipping time: USA. 7 to 13 business days Canada. 15 to 20 business days Austrralia. West Europe 20 to 45 business days Other Country: 30-60 business days If you want choose Expedited shipping. Please Contact us before payment. and we will send you an invoice. The item will be dispatched in the same day or next working day after received payment in usual. If have any special case, we will inform you& get your confirmation. For the cost of combined shipping. Please contact us for further negotiation. We only ship to the approved address given in PayPal payment. Please make sure payment address in PayPal is correct. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. A notification email of dispatch will be sent to buyer after item is posted. Please email us if you don't receive our email after 5 days of full payment sent. Please contact us if you have any difficulty in getting your items after 40 working days. import duty Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. Payment Method We prefer accept PayPal Payment method, Any currency is ok as long as accepted by PayPal. Calculating the amount just according to the exchange rate of intraday. Please note we also accept the wire transfer or others. A non-payment dispute will be opened if full payment is not received after 14 days of auction. Return Policy In the unlikely event that a return is request. All returns must include all original items undamaged. In re-saleable condition. All original packaging including manuals, warranty forms, etc. Shipping and handling fees are not refundable. Buyer is responsible for shipping costs incurre
$
24.99
Buy It Now
Free Shipping
Condition: New
Location: Valencia, United States
NEW TIG Power Cable 12 1/2 foot 45V03 Blow Torch Welding.
$
40.42
Buy It Now
Free Shipping
Condition: New
Location: China
This kit is suitable for all 9 series air-cooled welding torches, 20 series water-cooled welding torches and 25 series water-cooled welding torches, including ... moreWP-9, WP-20, WP-25 TIG welding torches.
$
13.22
Buy It Now
Free Shipping
Condition: New
Location: China
Easy to use. 1 17CB20G Collets Body Stubby Gas Lens 3.2mm 1/8". 1 10N25S Stubby Collet 3.2mm 1/8". 2 Gas Lens Insulators. 1 #12 Heat Resistant Glass. ... moreThe real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
$
3946.99
Buy It Now
Free Shipping
Condition: New
Location: United States
MILLER ELECTRIC. Electrical Boxes. Electrical Outlets. Kmc Col1609sss Cable Clamp,1" Dia.,1/2" W,Pk10. & Recepticles. Light Industrial. and Enclosures. ... moreGeneral Purpose.
$
40.00
Buy It Now
$4.75 Shipping
Condition: New
Location: Mount Holly, United States
Weld Craft SW-2 main switch.
$
11.99
Buy It Now
Free Shipping
Condition: New
Location: Santa Fe Springs, United States
10 x 10N30 TIG Collet Body.
$
18.99
Buy It Now
Free Shipping
Condition: New
Location: Santa Fe Springs, United States
5 x 45V116S TIG Collet Body.
$
23.99
Buy It Now
Free Shipping
Condition: New
Location: Duluth, United States
Parts Table for TIG Torch Accessory Kit (T18B) WeldingCity® 10-pk Gas Lens Ceramic Cup 54N17 #5 TIG Welding Torch 17/18/26 USA. TIG Torch Accessory Kits. ... moreTIG Torch Parts. TIG Complete Torches. 12-pcs TIG torch accessory kit for 3/32"large gas lens set-up in Torch 17, 18 and 26 series.
$
224.99
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
HITBOX TIG Stick MMA IGBT Inverter 220V 200Amp Welder High Frequency Portable Welding Machine with Electrode Holder Earth Clamp Tig Gun. 1 TIG welder. ... moreWelding Process :TIG / ARC. Easy arc ignition, litter spattering, stable current and good shaping.
$
499.00
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
3-in-1 MIG, TIG, Stick, Arc DC Inverter Welder, Use MIG Gun Can weld 1/2" Aluminum Very Easily. This welder can work well with solid wire and flux wire ... moreas well as aluminum wire. It also has the TIG and STICK function, can weld steel and stainless steel perfectly.
$
143.49
Buy It Now
Free Shipping
Condition: New
Location: United States
Manufacturer model:ARC145D. ARC145D, 145A 110/220V Stick Welder ARC Welding Machine. The ARC145D welding machine adopt Light weight and compact design,easy ... moreto carry. Arc welder adopt IGBT Inverter technology, Light weight but powerful, This welder easy weld mild steel, stainless steel and iron.
$
100.00
Buy It Now
Free Shipping
Condition: New
Location: Conway, United States
Lincoln Electric Tig Torch 200amp 12.5 Feet Long PTA-26 K1783-1.
$
171.50
Buy It Now
Free Shipping
Condition: New
Location: 乐清市, China
Pulse frequency: 1-20HZ. Pulse duty cycle: 85. Suitable for: more than 90% of welders. Weight: 3KG. Interval: 1-999MS.
$
47.95
Buy It Now
$0.37 Shipping
Condition: New
Location: China
$
8.56
Buy It Now
Free Shipping
Condition: New
Location: China
Model: WP9 / WP17, WP26 (optional). Suitable for installation on TIG welding WP9 / WP-17 / WP26. Quick connection of TIG water-cooled welding torch. 1 ... moreWelding connector. Made of high-quality copper, it has strong wear resistance, so it is durable.
$
20.47
Buy It Now
Free Shipping
Condition: New
Location: China
Suitable for WP 17 18 26 welding torch Mayitr. Connect your water and electricity together, or connect gas and electricity together for a torch connection. ... more1 Adapter M16 to 35-50. Made of high-quality materials, durable.
$
13.50
Buy It Now
$6.21 Shipping
Condition: New
Location: 中山市, China
Water Cooled. WP-24WF Flexible Torch body. import duty. and we will send you an invoice.
$
7.99
Buy It Now
Free Shipping
Condition: New
Location: China
TIG torch/ Plasma torch switch with ready wire Torch Switch product name: Mirco Torch switch. Packing list: Ref: 9-8215 electrode 5pcs. Product features: ... moreTorch switch with ready weld cable(10cm) Easy connect to torch. TIG welding torch/ Plasma cutting torch Country of original: Made in China. Payment- WeldingStop will accept Payment method as the current eBay accepted. Any currency as long as accepted by current platform. Calculating the amount just according to the exchange rate of intraday. Please note we also accept the wire transfer or L/C and others for bathch order. if you have further request please contact us for further details- A non-payment dispute will be opened if full payment is not received after 5 days of auction. In case of auction Ebay charges.Paypal transaction might be included in the final price. Delivery details- We will dispatch the items in the same day or next working day as the payment confirm in usual. Any special case. We will inform you for confirmation through or system email" info#weldingstop.com" please make sure our email will NOT be spamed. We make all shipment with tracking No. It should be available for tracking online within 72hrs after shipping. As the human intyping error if you found the No.is not correct please contact us immeditately. For economic and standard shipping methods we can only promise the handling time in our end. Sometimes shipping time may be longer than our expectation. We will be really appreciated your patients. Please DO contact us if the shipping time over 20 business days to U.S. or 40 business days to other countries. For combined shipping cost. Please contact us for further negotiation. Please ensure the shipping address is fully correct in case for miss delivery. Non-received items caused by invalid address are not in our full refund or replacement policy. A notification of dispatch will be sent via email to buyer after package is posted. Please contact us if you have not receive our email after 5 days after payment. Te
$
21.99
Buy It Now
Free Shipping
Condition: New
Location: Santa Fe Springs, United States
10-pk 54N18L #4 1/4" TIG Alumina Long Gas Lens Ceramic Cup Nozzle for Welding Torch WP17 WP18 WP26. 10 x 54N18L Long Gas Lens Ceramic Cup Nozzles.
$
4.95
Buy It Now
Free Shipping
Condition: New
Location: Kansas City, United States
Made from high strength alumina. Most popular nozzle type in TIG welding. Exceptionally high impact resistance, heat resistance and thermal conductivity. ... moreHigher heat resistance than lava nozzles.
$
7.69
Buy It Now
Free Shipping
Condition: New
Location: Santa Fe Springs, United States
5 x 13N28 TIG Collet Body.
$
199.99
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Besides, there are almost all necessary accessories included in this kit for convenient operation. Don't hesitate to buy it! Adopts IGBT module technology, ... moreenergy-saving and stable heat dissipation.
$
7.30
Buy It Now
Free Shipping
Condition: New
Location: 闵行区, China
$
329.00
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
· Processes: TIG (GTAW), Stick, Arc. TIG-205HF is a rectifier adopting the most advanced inverter technology. · TIG Current Range: 230V/18.0V/10-200A, ... more115V/15.8V/10-130A. · 13 Feet 250A Professional TIG Torch Gun.
$
74.99
Buy It Now
Free Shipping
Condition: New
Location: Arcadia, United States
SIMADRE HIGH QUALITY 13ft WP-17 TIG WELDING TORCH (7-PIN). Torch is a native 2-pin torch. Torch includes a 2-pin to 7-pin adapter. Designed for use with ... more7-pin Simadre machines.
$
49.99
Buy It Now
Free Shipping
Condition: New
Location: Walton, United States
150 Amp Air-Cooled WP-17FV (flexible gas valve head) TIG complete torch with 12-ft cable. 1 10N49 Alumina Ceramic Cup #5 (5/16" orifice). 2 10N48 Alumina ... moreCeramic Cup #6 (3/8" orifice) 1. Power Cable Connection, 10-25.
$
25.99
Buy It Now
Free Shipping
Condition: New
Location: Duluth, United States
Parts Table for TIG Torch Accessory Kit (T60A) TIG Torch Accessory Kits. TIG Torch Parts. TIG Complete Torches. 12-pcs TIG torch accessory kit forlarge ... moregas lens setup (3/32" and 1/8") in torch 17, 18 and 26 series.
$
7.04
Buy It Now
Free Shipping
Condition: New
Location: China
7-piece WP-9/20/25 TIG welding torch stubby gas lens heat-resistant glass set. Stubby gas lens: about 2.4 mm. 1 45Vxx chuck body gas lens for tig welding ... moregun. 1 13Nxx chuck for tig welding gun. Type: welding torch accessories.
$
75.99
Buy It Now
Free Shipping
Condition: New
Location: Dallas, United States
TIG Welding Torch Welding Gun WP17FV with 13 Feet 4M TIG Welder Adapter TIG ARC.
$
279.99
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
MIG Welder Flux Core Stick/Mig/TIG 4 in 1 RBM-1550D Gas/Gasless Welding Machine 110V/220V Solid Wire Spool Gun Available Automatic Feed Inverter for Beginning ... moreWelder New upgrade.
$
248.49
Buy It Now
$9.98 Shipping
Condition: New
Location: Chino, United States
This cooling tank is designed for use with TIG welders to provide powerful cooling. 1 welder water cooler. The design of the cooling circulating water ... moretank structure is reasonable and convenient to use.
$
257.56
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Water capacity: about 10L. The design of the cooling circulating water tank structure is reasonable and convenient to use. The box has a vortex self-heating ... morepump, a water circulation heat sink, a water circulation system, and a high temperature plastic water storage tank.
$
100.00
Buy It Now
$16.85 Shipping
Condition: For parts or not working
Location: Belvidere, United States
New in original box.Never installed but may have sat in inventory for extended period. May or may not show signs of shelf wear.
$
39.12
Buy It Now
Free Shipping
Condition: New
Location: Fort Lauderdale, United States
TIG TORCH SETS. TIG TORCH PARTS & ACCESSORIES. TIG TORCH CONSUMABLES. SÜA - Long Wedge Collet for 17, 18 & 26 Series TIG Torches with Argon-Saving. SÜA ... more- Collet Body for 9, 20, 17, 18 & 26 Series TIG Torches with Argon-Saving.
$
299.67
Buy It Now
Free Shipping
Condition: New
Location: Miami, United States
Lightweight 32 lbs.
$
109.95
Buy It Now
Free Shipping
Condition: New
Location: Cottage Grove, United States
Part Number‎CK17-25-R FX. Item model number‎CK17-25-R FX. Certification‎Certified frustration-free. Material‎Brass, Plastic, Copper, Rubber. Is Discontinued ... moreBy Manufacturer‎No. Technical Details.
$
10.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Fairbanks, United States
10-pk 54N18 #4 1/4" TIG Ceramic Gas Lens Cup Nozzle for Welding Torch 17/18/26. May not come in original box. New old stock
$
3181.81
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
MILLER ELECTRIC 907711. MILLER Maxstar 161 STH TIG Welder. TIG Welder, For Material Type Stainless Steel, Steel, For Maximum Material Thickness 3/16 in ... more(Steel), For Minimum Material Thickness 0.020 in (Steel), Input Frequency 50/60 Hz, Max.
$
1545.04
Buy It Now
Free Shipping
Condition: New
Location: China
More Products.
$
567.50
Buy It Now
Free Shipping
Condition: New
Location: Dayton, United States
【2 IN 1 WELDER】 - 2 in 1 combo welding, used as TIG welder or Arc stick welder. Arc stick welding/argon welding switch. Output current adjustable with ... moreknob: TIG welding, ARC welding. This is a 2 in 1 combo welding machine, which can be used as a Tig welder and arc stick welder.
$
7.49
Buy It Now
Free Shipping
Condition: New
Location: Duluth, United States
Premium quality TIG welding torch collets 13N22 (1/16") for 9/20/25 torches. WeldingCity 10. WeldingCity 2-pk Long Ceramic Cup 10N47L #7 7/16 TIG Welding ... moreTorch 17/18/26. WeldingCity 5-pk Gas Lens Ceramic Cup 54N16 #6 TIG Welding Torch 17/18/26 ' USA.
$
15.59
Buy It Now
$11.00 Shipping
Condition: New
Location: China
WP-26FV SR-26FV TIG Welding Torch Head Body.Flexible& Gas Valve 200A Air-Cooled. Summary Of Our Selling Policies Shipping Detail Shipping time: USA. ... more7 to 13 business days Canada. 15 to 20 business days Austrralia. West Europe 20 to 45 business days Other Country: 30-60 business days If you want choose Expedited shipping. Please Contact us before payment. and we will send you an invoice. The item will be dispatched in the same day or next working day after received payment in usual. If have any special case, we will inform you& get your confirmation. For the cost of combined shipping. Please contact us for further negotiation. We only ship to the approved address given in PayPal payment. Please make sure payment address in PayPal is correct. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. A notification email of dispatch will be sent to buyer after item is posted. Please email us if you don't receive our email after 5 days of full payment sent. Please contact us if you have any difficulty in getting your items after 40 working days. import duty Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. Payment Method We prefer accept PayPal Payment method, Any currency is ok as long as accepted by PayPal. Calculating the amount just according to the exchange rate of intraday. Please note we also accept the wire transfer or others. A non-payment dispute will be opened if full payment is not received after 14 days of auction. Return Policy In the unlikely event that a return is request. All returns must include all original items undamaged. In re-saleable condition. All original packaging including manuals, warranty forms, etc. Shipping and handling fees are not refundable. Buyer is responsible for shipping costs incurred shipping products
$
199.99
Buy It Now
Free Shipping
Condition: New
Location: Lumberton, United States
Brand Unbranded MPN Does Not Apply Welding Process Tig/Stick Welder Arcing way Transfer Rated voltage(V) 220V/110V Rated input current(A) MMA:27.3 TIG:16.8 ... moreNo-load voltage(V) 50 Output current(A) 10-200 Rated output voltage(V) MMA:28V TIG:18V No-load loss(W) 40 Duty cycle(%) 60% Power factor 0.73 Efficiency (%) 80 Protection class IP21 Insulation Grade F Net Weight 9.5KG Electrode Diameter(mm) 2-3.2 Base Material Carbon,Stainless,Low-alloy steel Package Size 375*155*240MM Model TIG200A Item Type Tig Welder Welded Material Carbon steel, galvanized sheet, stainless steel Polarity DC Color Orange Warrantly 5 Year Type TIG/ARC Welder Material Steel, iron Size 14in*5.5in*8.2in.
$
99.99
Buy It Now
Free Shipping
Condition: Used
Location: Prospect Park, United States
Miller Xmt Weldcraft WP17 V Air Cooler TIG Gun Torch 25ft lead Dinse Connector. This was puller from a miller Xmt 304 3in1 system . Sold as is .
$
7.99
Buy It Now
Free Shipping
Condition: New
Location: Duluth, United States
WeldingCity 10. WeldingCity® 2-pk TIG Welding Torch STUBBY Collet Body 4CB116 1/16" for 17/18/26. TIG Torch Accessory Kits. TIG Torch Parts. TIG Complete ... moreTorches. Stick Welding. Welding Safety. Use with 13N collet body in regular torch setup.
$
77.00
Buy It Now
Free Shipping
Condition: New
Location: Indianapolis, United States
SquareTrade © AP6.0 Untitled Document BRAND NEW MILLER INTERNATIONAL STYLE AIR COOLED TIG TORCH ADAPTER 195378. FREE GROUND SHIPPING TO ANY OF THE ... moreCONTINENTAL 48 STATES. You can call me at 866-854-7380 from 8AM to 9PM Eastern Time(EST) 7 days a week with questions. PayPal: Paypal is preferred payment method. Credit Cards: Now right here in checkout. Select Credit Card Option and enter information exactly as on credit card statement and card. You may change ship to address during check-out. Call 866-854-7380, 8AM to 9PM Eastern Time(EST) 7 days a week with questions or concerns We expect payment within 3 days of purchase. We must charge sales tax as follows; Indiana(7% Illinois(6.25% Kentucky(6.00% Michigan(6%and Ohio(6.50% WE USUALLY SHIP THE NEXT BUSINESS DAY AFTER PAYMENT RECEIVED. SAME DAY IN SOME CASES. UPS SENDS TRACKING INFORMATION TO YOUR EMAIL ADDRESS USED FOR SALE. TRUCK TRACKING INFO SENT IN SEPARATE EMAIL. FREE GROUND SHIPPING TO ANY OF THE CONTINENTAL 48 STATES. All items are covered by Manufacturer warranties. We will help you with any warranty issues. Small items shipped by Economy mail. With Priority mail option, or UPS,each listing shows the standard way it will ship, with options for faster shipping. unless you choose 1st or 2nd day air at additional charge. Larger welders are shipped via common carrier of our choice. We get it to your door. Additional charges for lift gates or special delivery are at your cost. Some welders are not stock items and will be ordered from manufacturer when paid for. These listings clearly state this in the listing. It usually takes only a few days to ship to you. Some are shipped direct from manufacturer. WE INSURE ALL SHIPMENTS. NO RETURNS UNLESS DAMAGED BEYOND REASONABLE REPAIR IN SHIPMENT OR AGREED UPON RE-STOCKING AND SHIPPING CHARGES PRIOR TO RETURN. EXCHANGES ONLY WHEN AGREED BEFORE RETURNING. EXCHANGES AND RETURNS SUBJECT TO 20% RE-STOCK PLUS OUTBOUND SHIPPING CHARGES AND RETURN SHIPPING CHARGES. ALL PRODUCTS COVERED BY MFG. WARRA
$
499.00
Buy It Now
Free Shipping
Condition: New
Location: Rowland Heights, United States
CTS-200 is a new type of multifunctional machine with stylish and generous appearance and superb production technology. Using the most advanced IGBT inverter ... moretechnology, the arc stability is good, the cutting effect is excellent, and the welding effect is perfect.
$
140.99
Buy It Now
Free Shipping
Condition: New
Location: Winona, United States
Miller Electric Part # WP1712RDI25. • Utilize existing parts. The A-150 Series uses Weldcraft 10N series consumables. • Hand-Held Air-Cooled TIG Welding ... moreTorch. Torch Style: Standard. Torch Series: A-150.
$
9.00
Buy It Now
Condition: New
Location: Bellflower, United States
Mission to provide decent shelter to everyone around the world. to provide decent and affordable housing for hardworking families in local communities ... moreand. Product Info. around the world.
$
9.15
Buy It Now
Free Shipping
Condition: New
Location: Fort Lauderdale, United States
High-Quality Collet Bodies for 17, 18 and 26 Series TIG Welding Torches. TIG TORCH SETS. TIG TORCH PARTS & ACCESSORIES. TIG TORCH CONSUMABLES. Check all ... morethe pictures for sizes and compatible accessories .
$
1999.00
Buy It Now
Free Shipping
Condition: New
Location: Baldwin Park, United States
MIG: 60% at 205A, 100% at 158A. The high-performance drive wire feeder is manufactured with the highest technology, allowing the wire feeding speed to ... morebe stable and efficient. When using MIG/MAG/Flux-Core welding, adjusting the welding current and wire feeding speed is very simple, easy, and direct.
$
825.00
Buy It Now
Free Shipping
Condition: New
Location: Indianapolis, United States
Miller Multimatic 200 TIG Torch Contractor Kit with Foot Control(301287) ITEM DESCRIPTION BRAND NEW. Miller Multimatic TIG Contractor Kit(301287) with ... moreFoot Control for use with the Miller Multimatic 200. Contains: Weldcraft 150Amp WP-17 TIG Torch w/25mm Dinse Connector, AK-2 Torch Accessory Kit, Remote Foot Control, Smith Regulator& Gas Hose, SHIPPING INFO We offer free shipping to the Continental 48 States. Alaska and Hawaii residents. Please email us prior to placing your order for a quote on shipping. We will gladly accept returns received within 14 days of delivery for a full refund. Minus our original shipping cost. Orders returned outside of the 14 day window are subject to a 20% restocking fee. Plus our original shipping cost. Returned items must be unused. In brand new condition, in original packaging. Items returned without their original packaging or in used condition are not eligible for refund or exchange and will be returned to you at your expense. ABOUT US The IOC in Welding Supplies stands for Indiana Oxygen Company. IOC has been a leader in the welding and gas industry since 1915. Making us the oldest independently owned Welding Supply Company in the county. After all these years, we're still a family owned company that is passionate about customer service and the products we sell. Our internet department was created in 2000 has been shipping products to our loyal customers across the country ever since. We like to think that we have some of the most knowledgeable customer service reps in the industry. Feel free to email or call us with questions about a product. To check the status of your order, or vent about the big game last weekend; we're here to help Monday through Friday, 8am to 6pm EST.
$
19.19
Buy It Now
$19.00 Shipping
Condition: New
Location: China
Miller Diamondback DB17 DB17V DB26 DB26V DB 18 Tig Welding torches. Can be used of WP-17 WP-18 WP-26 TIG Welding Torch. Lincoln PTA-17 PTA-17V PTA-26 ... morePTA-26V PTW-18 Tig Welding Torches. Can be used Collet Body Gas Lens 45V29 45V24 45V25 45V25M 45V26 45V27 45V28.
$
7.59
Buy It Now
Free Shipping
Condition: New
Location: Duluth, United States
Premium quality long TIG collets 13N22L (1/16") for use with large gas lens in 9/20/25 torch. WeldingCity 10. WeldingCity 5-pk Ceramic Cup 10N48 #6 3/8" ... morefor TIG Welding Torch 17/18/26. WeldingCity 5-pk Gas Lens Ceramic Cup 54N14 #8 TIG Welding Torch 17/18/26 ' USA.
$
145.00
Buy It Now
$25.00 Shipping
Condition: New
Location: Sapulpa, United States
NICE Weldcraft WP-20-25 TIG Torch 25 foot Hoses Nozzle Tip This gently used Weldcraft WP-20 Medium Duty TIG Torch is in excellent condition! No leaks. ... moreNo cracks, ready to weld. We are a small electronics shop and this torch was always used below 100 Amps. This torch was always cooled with an approved anti corrosion coolant, never plain water. We have gone to a pencil type torch for our light duty work, allowing this torch to move on to a new home. Features: Weldcraft WP-20 TIG Torch. Water cooled and rated at 250 Amps, Hoses are flexible and in excellent condition, Hoses have flexible. Anti abrasion cover Long back cap included that will handle a full tungsten length 1 collet and 1/16 inch tungsten. Collet body and#7 alumina cup included, Torch will handle from 0.020 to 1/8 inch tungestens with change of collet body and collet, Perfect for your projects! I believe you will get many years of good service from this torch. Feel free to submit an offer! Below are photographs of the WP-20-25 TIG Torch for sale in this auction. My Feedback Policy My feedback policy is to enter your feedback after you have received the item and entered feedback for us to ensure that you are satisfied. Please contact me with any issues you may have with the item you received before entering feedback. I try to ensure that all business deals are fair. And represented approriately. You can read my feedbacks to see that a fair amount of folks felt they got a fair and good deal on the items I sell. I promise that you can bid with confidence, and what you see is what you will receive. Life is too short and too precious to not do things right. Sales. Shipping& Conditions Item will be shipped either UPS or USPS with delivery confirmation. Item is sold as is. Payment via PayPal only. And within 3 days of auction close, please. Sales and shipping to PayPal address of record for purchaser in Continental United States Only. Please. Item will be shipped within 3 days of receipt of payment on a Monday. Wednesday or a Friday. I will take extra care
$
124.99
Buy It Now
Free Shipping
Condition: For parts or not working
Location: Sidney, United States
This is the front panel only and it is being sold for parts.
$
269.00
Buy It Now
Free Shipping
Condition: New
Location: Baldwin Park, United States
Processes: TIG (GTAW), Stick, Arc. TIG Current Range: 230V/18.0V/10-180A, 115V/15.8V/10-120A. TIG-185HF integrates advanced MOSFET inverter technology, ... moreallowing excellent arc stability and the most beautiful welds.
$
21.35
Buy It Now
Free Shipping
Condition: Neu
Location: China
*WP: Reine Wolframelektrode ohne Zusatz von Seltenerdoxiden hat die niedrigste Elektronenemissionsfähigkeit und ist daher nur for Wechselstromschweißen ... moreunter hohen Belastungsbedingungen geeignet, wie z. B. Aluminium- und Legierungsschweißen. Es dauert ungefähr 7-15 Werktage nach Australien; ungefähr 10-30 arbeitstage zu anderen ländern. Die Transitzeit kann sich aufgrund des schlechten Wetters und der Zollkontrolle etwas verzögern. Wenn Sie Ihren Artikel nicht innerhalb von 30 Werktagen nach Abschluss der Zahlung erhalten, kontaktieren Sie uns bitte umgehend for weitere Unterstützung. Wir streben for 100% Kundenzufriedenheit! Positives Feedback ist uns sehr wichtig. Wenn Sie Fragen haben, können Sie uns gerne über "Frage an den Verkäufer" kontaktieren. Wir werden Ihre E-Mail innerhalb von.
$
209.99
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
• DC TIG (DC tungsten inert gas welding). DC Pulse TIG. • MMA (stick electrode). DC TIG, DCEP is used normally (workpiece connected to positive polarity, ... morewhile torch connected to. DC Pulsed TIG has the following characters ).
 In 

Past Items  
 
THIS IS A MILLER RFCS-14HD FOOT CONTROL UNABLE TO TEST SELLING AS IS Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. And if the item is weight is over 150 pounds and is too heavy for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item Usually Power cord and connector cords are not included please email me if you have a question before purchasing. ... morePaypal Is accepted All Items will be shipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out Thank You For Looking At Are Item5 A2
Définir des actions Nappe magiques et la santé humaine + Pendule oeil de tigre Magie Nappe Les actions de diagnostic et de la santé humaine est conçu pour la détection rapide et précise des effets magiques et magiques chez les humains. Il vous dira si oui ou non la personne sur la magie. Aussi nappe permet d'identifier et de diagnostiquer les maladies. Aider à identifier la lésion et les causes. Magie Nappe Les actions de diagnostic et de la santé humaine contient les colonnes suivantes: Mauvais œil. Magie d'amour, Malédiction, Punition, Voeu, Incarnation, Malédiction, Anomalie patrimoniale, Conflit intérieur, Déformation personnelle, Mentalité, Organes des sens, Coeur, Apparence, Épine dorsale, Respiration, Urogénital, Sang, Digestion, Hormonal Tiger ... moreEye Pendulum- Pendule oeil de tigre est un outil de diagnostic pour la détection d'un effet magique. Et la maladie excellent. C'est pourquoi il est inclus avec Nappes effets magiques et de la santé. Tissu. La plus haute qualité. Résistant à la saleté. Facile à laver à la machine. Garantie de satisfaction à 100% Taille 40x40 cm. 16x16 cm.
MILLER TIG TORCH CABLE 150A 12.5 ft Used. But in a great shape! Please, see pictures! You will get what you see on the pictures! For Alaska. Hawaii, Puerto Rico and Canada add $49.99 to the shipping cost! No International Shipping except Global Shipping Program* `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14b4805c660-0x114-
20 FT. TWECO TIG TOURCH WITH START/ STOP SWITCH. NOT USED MUCH. please email with questions
What you are purchasing is a Radnor 17FV tig welding torch with a 25' hose. This item is lightly used but still in great shape. It also comes with a power block. If you have any questions please feel free to send me a message. Thank you and happy bidding. Specifications: Amps: 150.00A AC/DC[Max] Handle Diameter: 7/8. Length: 7-3/4. Cable Length: 25.0 ft. Cooling Method: Air. Head Type: Flexible. Handle Process: TIG- GTAW. Includes: Torch Body Flex Head Handle Wrench 2PC Rubber Power Cable. Type: Torch Package. If you do the"buy it now" price I will also include a back cap. Collet, collet body, cup, and a brand new 1/8 2% thoriated tungsten. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14b48063aec-0x105-
Tig Welder Torch Head Body- Lot Of 3- Various Brands& Models Good usable condition Please refer to photos. 2 are like new condition Brands& models- HELIARC HW17. WNI 17, CNI 17 Shipping priced for the 48 continental United States Posted with
Thermal Dynamics DC plasma TIG. Ultima 150 model. Includes torch and consumables. Torch will need a few parts to make the unit functional. The welder can be picked up from me if you choose. Shipping cost will be the responsibility of the buyer. I will box it up for shipping. I will only ship to the lower 48 US states. No warranty implied or given. No returns. Paypal only. Item will ship when payment clears.
I purchase this brand new just recently. Used it for a total of a couple minutes and my power supply quit working. I just ordered a new welder that uses a different style. This connector is a solid 50mm Dinse style and it perfect condition. I don't have the original packing which was a plastic bag. Fits some Maxstar's. Syncrowave's and other tig machines. 50 states only. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b4a9322c6-0x10d-
BUY TEN ITEMS AND SHIPPING IS FREE! VINTAGE POSTCARD- CONDITION: EXC*See Scans Below For Detailed Condition of Both Sides of the Postcard. DATE/ERA: 1900s-20s. Standard Size 3.5x5.5. Please Disregard Any Neon Scanner Lines in the Images as they are NOT on the Card Itself We do combine shipping. See our About Me Page for our shipping and handling chart.
8.5x11 inch high quality reproduction of this promotional photo. Perfect for displaying and hanging. Slightly larger than the normal 8x10 feature more picture information and less crop than an 8x10 offers. Check out all my other photos. Your photo will come shipped in a cardboard protective envelope and is printed profesionally on heavy duty photo paper with high gloss. A lower semi gloss is also available if you prefer. Please send me a message with your order if you prefer the semi gloss finish instead of the high gloss. Otherwise you will receive the high gloss. Your photo will NOT come with"do not copy" written on it. Pay Shipping on 1st Item only. The others ship free! The more you buy the more you save! 8.5x11 inch high quality reproduction of this promotional photo. Perfect for displaying and hanging. Slightly larger than ... morethe normal 8x10 feature more picture information and less crop than an 8x10 offers. Check out all my other photos. Photo Size Comparison = Less cropping on the 8.5X11 in Your photo will come shipped in a cardboard protective envelope and is printed profesionally on heavy duty photo paper with high gloss. A lower semi gloss is also available if you prefer. Please send me a message with your order if you prefer the semi gloss finish instead of the high gloss. Otherwise you will receive the high gloss. Your photo will NOT come with"do not copy" written on it.
I have a excellent working condition Miller syncrowave 250 ac/dc-cc welding power source for precise tig fabrication. Machine was certified last year. Item is turn key. Plug and play. Welder comes with everything ready to weld, even has factory Miller cooler and rolling stand. Bottle does not come with welder. The only reason for selling is I've downsized my shop and have to replace with a smaller welder. Thanks for viewing and bidding.
Purchased new and no longer needed. This comes with several accessories that make this a wonderful all-in-one purchase. Everything functions and works flawlessly. Spool gun for aluminum welding(snap on) Tig welding torch- Compressed gas regulator. New spool of mig welding wire. all combustibles for mig and tig welding. Snap on helmet auto darkening YA4602 Please feel free to ask any questions. Local pick-up or willing to deliver within 50 miles of Austin. TX. Also willing to ship to lower 48 however, shipping fees will need to be determined.
LINCOLN TIG-300 WELDER Up for auction is Lincoln Tig-300 welder. This machine is in good used condition and ready to go to work! It is powered by 1 phase 230/460 volt power. It comes with Bernard cooler and cart. It is a model# TIG300/300 Code 7499. Serial# AC-375777. P lease visit the manufacturers website at for complete specs. This machine is expensive new. Here's your chance to save! The machine can be shipped via Big Red Brokerage or World wide express. Just give me your zip code and I will run a quote for you. All of my shipping quotes are to a business with unloading capabilities. If this is to be shipped to a residence or you need a lift gate truck please indicate. Please contact us for available Payment Methods. Payment is due within 3 days of the end of auction. If shipping out of the country. Buyer is responsible for any fees ... moreor taxes there country may impose. Colorado residents will pay a 7.1% tax. After payment is received I will coordinate shipping within 1-3 days. I do my best to accurately describe the items and test the items to the best of my ability. We staff a mechanic and are very knowledgeable. Please keep in mind you are buying used equipment. Not new or refurbished unless stated in the description. Used equipment will have dings, dents, scratches in the paint, minor cracks and chips. Equipmentstop reserves the right to end an auction early. Not all items sold by Equipmentstop are weighable by Equipmentstop, therefore some items shipping weights are a best estimate. Feedback will be left after feedback has been received. If you have a question or concern. Please ask before bidding. If you have an issue with the item after receiving it please contact me before leaving feedback. I will work to resolve the issue with in reason. I want happy customers and repeat buyers. Thank you for your bid! On Feb-01-12 at 17:37:59 PST. Seller added the following information:
I have owned this unit since new and has very little use. unit always worked flawlessly however the other day I saw the blue LED flashing and turned the unit off. the next day the unit would not power up. I have bought a new much big unit as all I needed was an excuse. This unit is in perfect cosmetic condition and im sure it cant be anything to big as the unit wasn't being used when it broke. not even sure it may have an internal circuit breaker or something along those lines. my loss your gain. thanks for looking
PowCon Inverter Welder with PowCon PD20 unit. 220/480V 3/single Phase. 400SMT, CC/CV, GTAW, ARC/STICK TIG MIG The inverter power supply is DC only and is intended for use with MIG. TIG and Stick(ARC) Welding. The 400SMT put out 400 Amps and weighs about 70 lbs. This unit works. A PD20 wire feeder is included. With multiple cables/torches/cords and foot pedals. This unit does NOT work. For that reason, we are selling the whole lot as NON WORKING FOR PARTS. Selling as-is. No returns. This has been on our warehouse shelf and no ones knows the exact history. It may work but no guarantees. Comes only with what is pictured. You MUST have a business that can accept a PALLET for the freight. Actual freight for 210lbs shipped from 97211 will be charged. Or arrange your own freight.
House of Bianchi Ivory Satin Wedding Dress with Fur Trim. Ivory dress by House of Bianchi. Scoop-neck with fur trim around collar. Matching fur trim on ends of sleeves; zipper closures at wrists. Net layers under skirt for volume. Back zipper hidden by row of fabric covered buttons. Skirt is pleated along back and sides. SIZE. Size marked: No apparent size marks. Measures approximately: in inches) Bust: 36 Waist: 30 Hip: 48 Shoulder to Shoulder: 14 Sleeve: 24. Front length: 62 Back Length: 82. Weight: 3.9 Lbs. Please note: Sizes vary and vintage sizes may differ from current sizing. Please note our approximate measurements. CONDITION. May have light wrinkles. Dust, and/or odors from handling and storage. Click here to view our other items! GICW listings are for pre-owned. Donated items that have not been tested for functionality. We recommend ... morethat all items be inspected and serviced by a professional before use. Items are not officially appraised, certified or authenticated. All items are sold in as-is condition. Bidders are responsible to check listings for updates. Please review our payment, shipping and return policies before placing a bid. Payment Information: Payments are accepted through PayPal and are due within 7 days of the end of the auction. Completed auctions without payment may have an Unpaid Item Case opened after 72 hours. If you experience any problems with the payment process. Please contact us immediately for assistance. Shipping Details: At this time we are only able to ship to PayPal verified address in the continental United States. We are unable to change shipping addresses once bids have been placed. Our method of shipping does not allow us to ship to P.O. Boxes. APO/FPO, Alaska, Hawaii, U.S. Territories or internationally. W e apologize for any inconvenience. Local pickup is available 7 days a week from 12pm to 3pm at no charge. 24 hours notice is required. Please message us before completing payment. Orders ship via BOTH UPS and UPS Mail Innovations. Orders less than 1 lb. and o
St. Tropez Strapless White Wedding Dress Style 7194E Size 14. White satin wedding dress with clear beading on bodice and skirt. Light boning in bodice. A-Line silhouette. Has tag attached. SIZE. Size marked: 14. Measures approximately: in inches) Bust: 36 Waist: 30 Hip: 42 Front length: 54 Back Length/ Train: 75. Weight: 4.6 Lbs. Please note: Sizes vary and vintage sizes may differ from current sizing. Please note our approximate measurements. CONDITION. Light wrinkles and dust from handling and storage. Top of bodice has two tucks/ alterations that have been let out and stitch marks remain. Click here to view our other items! GICW listings are for pre-owned. Donated items that have not been tested for functionality. We recommend that all items be inspected and serviced by a professional before use. Items are not officially appraised, certified ... moreor authenticated. All items are sold in as-is condition. Bidders are responsible to check listings for updates. Please review our payment, shipping and return policies before placing a bid. Payment Information: Payments are accepted through PayPal and are due within 7 days of the end of the auction. Completed auctions without payment may have an Unpaid Item Case opened after 72 hours. If you experience any problems with the payment process. Please contact us immediately for assistance. Shipping Details: At this time we are only able to ship to PayPal verified address in the continental United States. We are unable to change shipping addresses once bids have been placed. Our method of shipping does not allow us to ship to P.O. Boxes. APO/FPO, Alaska, Hawaii, U.S. Territories or internationally. W e apologize for any inconvenience. Local pickup is available 7 days a week from 12pm to 3pm at no charge. 24 hours notice is required. Please message us before completing payment. Orders ship via BOTH UPS and UPS Mail Innovations. Orders less than 1 lb. and orders with items totaling less than $100 will automatically ship via UPS Mail Innovations. USPS is responsible fo
We are selling a SIP 02878 Flame Tig. MIG, Arc Variable Helmet This item is used and will be subject to cosmetic wear and tear. It has been tested and is in good working order. The reaction time is a little slow after weld though. The item will come as shown in the images. I would advise popping down prior to bidding to ensure you are happy with what you will be buying. This item will be as sold as seen! This item will need to be collected during the below hours ONLY I MPORTANT NOTICE- PLEASE READ If you are not satisfied with your purchase. Please do not simply leave negative or neutral feedback as that helps no-one, simply contact us by e-mail or message and we will try to resolve your concerns within 48 hours no matter how small. We cannot resolve your concerns if we are uninformed. Please await our reply before opening any case in the ... moreresolution centre. Opening Hours For Collection are Monday to Friday 9am- 5pm Check out my!
PLEASE READ FULL DESCRIPTION AND VIEW ALL PICTURES! Used Lincoln Invertec V155S Portable Welder#K2605-1 with KP508 parts Kit and Gauge model 601-5-30. Normal wear/use such as surface scratch/scuff marks. And dirt/dust. Clamps. Includes Ground Clam and Rod Holder. Only includes what is pictured. Case is damaged. Only includes what is pictured. Please see all pictures for more details. Product Information: The Lincoln Invertec V155S portable welder does not sacrifice power for portability. Weld Thickness(in. 1/8. Electrode Cable Length(ft. 10, Volts: 120/230, Amps: 155, Amperage Adjustments: 5–155, Range Selection: Continuous, Duty Cycle: 30% Power Cord(ft. 6.6, Electrode Size(in. 3/32, Weldable Metals: Steel, stainless, chrome moly, brass, copper, Clamp Cable Length(ft. 10, Dimensions L x W x H(in. 15 x 6 x 11. Offers Accepted. I have a Miller ... moreCST 280 and a Miller Maxstar 200sd and a Thermal Arc 95 that I will be listing. Contact me with any questions.
Tig Torch body Hose Collet V-92 Slide valve Linde Weldcraft with Tungsten. Torch body in good shape, comes with a few partial boxes of tungsten. Comes as shown in pictures. We treat items we are selling as items we are buying! Thank you and good luck bidding! Please contact if you have any questions.
USED for about 3 hours total A COMPLETE tweco 141i Welder WITH tig torch and consumables, WITH the foot pedal for tig, WITH Stick holder, WITH Ground lead, WITH partial small roll flux core.024, With manual and DVD, WITH MIG gun and consumables, WITH reg and hose. ALL as provided with the machine. My boy did not take to welding. A shame, really! here is the kit: weldingsuppliesfromioc.com/tweco-fabricator-141i-multi-process-welding-system-w1003141-with-tig-torch-w4013802-foot-control-tha600285:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14b51dc861f-0x108-
C.A.T. Mini Pewter Koala Figurine with Heart USA Made 1980 Signed"Tig" Any questions at all. Please ask. I have lots of other items listed and I will gladly combine shipping and handling, but let me know ahead of time. Please take a peek at my other listings. Happy Bidding: Note to International buyers: You are responsible for all duties. Taxes and any other unforeseeable charges into your country. Your purchase price and shipping DO NOT include this. Thank You.
The hoses are listed as used but still in good condition. Shipping international will be additional cost. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14b545f097e-0x106-
A SEALEY Solar Powered Automatic MIG/ARC/TIG Welding Helmet Shade 9 to 13 PWH599 It has been used only 3 times. Is in good condition and comes in the original box. It has a high quality variable shade 9-13 lens. It is fitted with a solar panel so no batteries required. It has a sensitivity switch and a delay speed switch control from dark to light to prevent arc eye. The helmet gives full neck protection. It has a comfortable headband and non slip quick release ratchet mechanism. It is suitable for MIG.TIG and arc welding. Collection is free and strongly advised but I can post entirely at the buyers own risk.
Lincoln ARC Welder IDEALARC TIG 300/300 amp. AC/DC combination welder. 25 ft. leads, original manual, single phase. Code#6187CH. Pick up only.
auction is for a very nice Victor rosebud heating tip about 32" overall length and the tip is 1-1/4" in dia. attachment i bought used but look like it was new and i used it 1 time for a repair job and has been sitting on a shelf since. copper finish has some oxidation. light scratches and a couple small dings around the edges of the tip. was very expensive new and this is not for the average home owner hobby torch this is for propane or natural gas ONLY DO NOT USE WITH ACETYLENE ask all questions prior to bidding
KIM COATES AUTOGRAPHED PSA/DNA 8X10 PHOTO THIS AUTOGRAPH WAS OBTAINED IN-PERSON BY WISHONASTAR AUTOGRAPHS PHOTO WILL COME WITH A COA FROM PSA/DNA PSA/DNA CERT#Y17467 SHIPPING IS $6.50 FOR US PRIORITY MAIL $12 FOR CANADA $15 FOR ALL OTHER INTERNATIONAL COUNTRIES COMBINED SHIPPING IS AVAILABLE! POSITIVE FEEDBACK WILL BE LEFT!
Miller Big 50 Diesel Constant Current DC welder/generator. 2014 hours. 50 ft. lead, 25 ft. ground, max rpm 1850. Have all the original manuals. Runs great. Allows portable MIG, TIG and Stick welding. Pick up only.
Miller XMT 300 CC/CV Weldet Mig/Tig/Stick complete set-up includes Miller 24A Feeder sn LG009342 with a Bernard Whip brand new. Spoolmate 185 sn B120448. Cables and accessories including tips and welding consumables. Runs the XMT300 display is not showing some of the segments but does work the 24A has the display upgrade installed and display wire speed. Sold as is and functioning. Due to shipping no returns the units works and welds. Please be sure before we pallet this up and ship it as it is heavy. Includes cart and regulator no gas bottle. Shipping only to commercial address or shipping dock for pick-up. Flat fee of 150 for shipping and crating. DOES NOT INCLUDE BIG SPOOL OF WIRE TO SAVE ON SHIP WEIGHT NO International or Canada lower 48 only. Good luck and thanks for looking. PayPal only.
Lincoln Hi-Freq box. Turns your welder into a tig welder making it capable if high frequency. This was pulled from my inlaws dads garage and appears to be in working condition. They tell me he hadn't welded in many years. And when he did it was a hobby. I have no way of testing, and do not know much about its operation. From demos on YouTube this will add on to your currently welder and provide higher frequency for Tig/ aluminum welding. Overall in good condition, with slight surface scratches and dust. The box does wobble a bit on a flat surface as well, but that looks to be adjustable. Comes with 3 torches. They look to be in working condition and have cables that go with them(all pictured) All this is being sold as is, no returns. Let me know if you have any questions. Thanks. I am also selling a Union Carbide Heliarc HW-26 Tig Welding ... moreTorch in my other ebay listings. Should be able to combine shipping for discount if both are purchased.
Heliarc HW-26 Tig Welding Torch Union Carbide T his was pulled from my in laws dads garage. Is used. But have no way to test. Appears to be in overall good condition. Selling as is. Cables appears to be 25' in length. Please see all picture for details and let me know if you have any questions.
Never used. Just some things are not in original packaging so I couldn't say new. Weldtec 17vpw tig torch air cooled. With ceramic heads and collots. also includes the metal rod holder. See pictures.You will receive exactly what is pictured.
Lincoln squarewave tig stick welder. Wheel kit. Water cooler. 100 amp twist lock electrically plug. Auction includes female plug as well. These two plugs alone are over $1.000 dollars. Machine runs mint. You are more than welcome to try it out. Water cooled torch and foot control. No stinger or ground clamp. Work has changed and no longer needed. Serial# U1980502312 Code# 10056 208 230 460 volt. Pick up only or I can deliver for a fee within 100 miles Pay cash upon receiving no PayPal No shipping I can deliver within the new York metro area for a fee.
Hello. I am starting each of my bargain lots at low price, regardless of it real value. Most items will not have additional descriptions, so use the picture to help you decide the condition, value, and your bid. PLEASE READ THE COMBINED SHIPPING SPECIALS: USA& CANADA shipping and handling is $1.95 for the 1st lot. International shipping and handling is $3.95 for the 1st lot. USA. CANADA and International: FREE for each additional lot when paid for. At the same time and purchased within a 7 day period. Here some of the abreviation used in the title: MNH = Mint Never Hinged. MINT = Mint Hinged. S/S = Souvenir Sheet or miniature sheets. M/S = Miniature Sheet. OPT = Overprinted. I will be please to answer any of your questions. Powered by The free listing tool. List your items fast and easy and manage your active items. g63.RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14b5b35b136-0x115-
Hobart model 362668 Tig welder foot control Description: Model: 362668· Switch 15A 125V· RHEO: 25.000 OHM 2W Item# 0215-29 We make every effort to communicate all of the details to make an informed decision. However, verification and perceived value may vary. If a condition or features are provided, they are ONLY done so as a COURTESY. You as a buyer are expected to know what you are purchasing and understand that all items are sold“as is. Where is, with all faults” The more informed you are. The better your purchase decision. Since your needs are unique to you, your evaluations will be different from others. This item was purchased for resale and was NOT used by seller. This item can be previewed and inspected by appointment only at our location in Chatsworth. Since I am not a dealer. This unit(s) is sold"As-Is" with"No ... moreWarranties" and"All Sales are Final. Shipping Information: 1- Merchandise will be held until funds clear. 2- We will ship National& International USPS/ UPS. 3- We combine shipping when you buy multiple items. Please see shipping calculator to calculate your shipping cost. Or, if you email the location information we will send to you the best shipping price. 4- Refunds are accepted ONLY if the item was not as describe in the auction. Buyer must contact us at(818) 734-9043. In 3 days of receiving the item. 5- The Buyer is responsible for return shipping charges
Weld Craft Water Cooled Tig Torch Kit Model WP-18V-25 350 A 25' cable length Lot#144 JMB Industrial Surplus. LLC 704-323-6845 10am-5pm(EST) Sales Policy When you enter a bid for one of our items. You enter into a contract- please place a bid only if you are serious about buying the item. If your offer is accepted, you will enter into a legally binding contract to purchase the item. You are bidding on USED. Pre-owned equipment. All sales are"as-is, seller makes no warranties, express or implied, as to equipment sold. Buyers' sole recourse is refund of purchase price or store credit, in the discretion of seller. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details Local pickups are free and can be prearranged with contact! Combined shipping is welcomed. Please contact us ... moreif interested. Common carrier shipments: Non-bulk items under 70 pounds will generally be shipped using USPS Priority Mail® Flat Rate. Larger items that require more specialized packing will be discussed with customer following purchase of item. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know. If we will be shipping to a business: The business name The business' address Contact information· If the receiver has a way to unload the pallet/ item or if we need to arrange for a lift gate. International shipping: We can ship outside of the U.S. Payment Details We prefer PayPal as payment; sign up is easy and the payments are secure. Feedback We strive to make sure that all of our customers are 100% satisfied with their purchases. If there is anything about your transaction that does not satisfy you. Please contact us before leaving feedback. Please inform us of the issue so that we can do our best to resolve it to your satisfaction. Communication is key to a successful transaction, and we want to do our best to conduct our eBay business in a positive manner.
Not sure which brand of torch my wp9 flex torch is. If you want. Need, or like it, bid. It did what it was supposed to do for a small torch, and will continue for a very long time if taken care of.
This is a local pick up only. Due to shipping issues there will be NO shipping! We ONLY accept PayPal payments at this time. Since this is a local pick up item. You as the buyer can have a company come pick up your item, package it& ship it to you. You as the buyer would have to find out how much it costs from the shipper, not us as the seller. If you as the buyer decide to do that, we are not responsible for your item once it leaves our facility. If you wish to return the item(s) for any reason we DO NOT refund your shipping either direction. That is why we have our items as a LOCAL PICK UP. Thank You. You must schedule an appointment& pick up your item within 5 business days of the end of the auction. Please call(734) 677-5224 This auction is for 1- FOR PARTS lincoln electric square wave tig 175 It has a BAD control board*as most ... moreof our items are used. Have our WCC logo w/ s etched in some items, scratches/ gouges/ dents/ dings ect. that are not always seen in the picture so please bid accordingly* SHIPPING- Due to the size/weight of this item if you want to have it shipped YOU as a buyer will have to arrange for this item to be shipped. Not me as the seller. You can call a UPS Store if you want to see how much it will cost for them to pick the item up. Package it for you and ship it to you. PICK-UP- All auctioned items are available for local pick up BY APPOINTMENT ONLY. Appointments for pick up are available Monday- Friday between 9:30 am and 3:30 pm EST. Please call or email with a day and time that works for you and I will try my best to accommodate. To make your pick up transactions faster and easier Please do not just DROP IN! ITEM INSPECTIONS- We make every attempt to show the damage in photos. In addition. All items are available for inspection at Washtenaw Community College’s shipping/ receiving facilities. If you are interested in personally inspecting an item please call to set up an appointment. 734) 677-5224 SALES TAX- In accordance with the Michigan Sales Tax Act. 167, P.A. 1933,
SNAP ON MM120SL MUSCLE MIG/ TIG WELDER WITH ROLL CART. WELDER RUNS ON 110. WELDER IS USED BUT IN OVERALL GOOD CONDITION. WELDER FUNCTIONS PROPERLY. WELDER COMES WITH MIG TIP ONLY. NO TIG TIP IS INCLUDED. WELDER DOES NOT COME WITH BOTTLES. WLDER HAS BEEN TESTED AND FUNCTIONS AS IT SHOULD. ITEM IS BEING SOLD AS IS AS FOUND WITH NO WARRANTIES EXPRESSED OR IMPLIED BY SELLER. PLEASE DO NOT BID IF YOU HAVE NOT HAD ALL OF YOUR QUESTIONS ANSWERED. I WILL NOT RE-NEGOTIATE A"DISCOUNT" IF YOU FEEL YOU CAN HOLD NEGATIVE FEEDBACK OVER MY HEAD. THANK YOU AND HAPPY BIDDING.
Star Wars Droids Original Cartoon Production TIG'S BOWL& SPOON Model Cel#BV198 Show: Droids: The Adventures of R2-D2 and C-3PO, Year Produced: 1985-86 Production Company: Lucas Films Type: Production Color Model Cel Media: Original Hand Painted Model Cel with Color guide. Contains hand written notes Size: 13" x 10.5" Please view our and on terminology if you have questions. Payment Requirements All buyers are required to pay within 14 days of their initial purchase. Failure to do so can result in a cancellation of the transaction. Once paid. Arrangement to hold to a package for more combined shipping savings is available. Global Shipping Information- We combine shipping on all orders. Domestic: $6.25 Canada: $8.40 Mexico: $ 12.15 International: $13.41 86.000 positive feedback's- you will be happy! Questions? call us ... moreat(619) 741-5888 OVER 1 8.000 items in our eBay store! Check out our Movie Props Store at Pop-King Inc. This is really an outstanding piece. OWN A PIECE OF ANIMATION HISTORY! The time. Effort and attention to detail are incredible. A great find! These animation cels are ONE OF A KIND and HAND Drawn- used in the production of the cartoon. Stored in smoke-free storage. Check out our other auctions as we combine auctions to save you on postage. Good luck and happy bidding.
2014 Leaf Pop Century Kim Coates Auto! Don't let this be the one you will forever need to complete your collection! You are ONLY bidding on the item described. Bidding Rules No one with an overall negative feedback should bid or their bid will be cancelled. If you have a 0 feedback. Please contact me with name and address to get approval to bid OR YOUR BID WILL BE CANCELLED. Payment is expected within 5 days of auction's close however my unpaid item assistant is set to send an unpaid item reminder after 3 days of non-payment. If you have feedback less than 10 you must pay within 3 days. Payment& Shipping Instructions Payment can be made via Paypal. Shipping will be $3.50 in the USA first class mail with delivery confirmation. $7 to Canada and elsewhere unless item or combination of items won total $40 in which case tracked registered ... moremail must be used at a cost of $21. I will combine shipping as well- each additional single card won add 50 cents. I make every effort to have the item into the mail stream within 24 hours of receiving payment- sometimes this is not possible. Please be patient and trust that your item will arrive safe and sound. Click here to see my other auctions.
This is a cute Disney plush stuffed Winnie the Pooh lot in good clean preowned condition. They are from 9-12" tall. Pooh and Eeoyore are kohls cares. Roo is Fisher Price, and Piglet and Tigger are Disney Store. They have some wear but is are in good overall cosmetic condition. See photos. Comes from a clean smoke free home. We combine shipping u16prhuf
Works. But is slightly tilted, and has side wobble because hinge tab is broken on one side. This can be modified to work with a tab repair(see broken tab in pics) or can operate as it is(I did for over 6 months until I sold my dynasty) This is being sold as working parts. With money back guarantee. It Comes assembled and ready to use. Returns are accepted, however buyer pays return shipping if not satisfied. Whining and complaining and asking for partial'money back but I still want to keep it' doesn't apply here. I don't sell on ebay to supply folks with free goods hand packed and shipped. If you want something looking and smelling shiny and perfect. It's called NEW and it costs a lot more. Pay up or don't complain! For all of the respectable ebayers that make this market a great place to buy and sell. Thank you and. ... moreEnjoy!
Disney Winnie the Pooh Medium Plush& Small Bean Bag Collection Winnie.Eyore, Piglet& Tigger all four in both sizes- see photos. please ask questions- no returns. FREE SHIPPING!
Miller Tig pedal model RFC-23A. This has been on the shelf for about 18 years. My father had used this on his Dialarc back in the 80's and 90's. I have no idea if it still works or what it would take to get it working. Free shipping to the lower 48 only. No warranties or guarantees expressed or implied.
Heliarc tig torch head with lines. About 25 ft in length. Appears to be in good shape. I have no way of testing. Free shipping to the lower 48 only. No warranties or guarantees expressed or implied.
Very well kept unit. Brand new 9002x filter and all extras included. Comes with backpack for PAPR. Fairly new battery, new charger, gloves etc. good luck!
Works. It's just missing the bottle connector on the right hand side.
Super nice Miller Dynasty 200dx with tons of accessories. Enough here to get you started welding. I'm upgrading to a dynasty 280dx watercooled setup and need to sell this to fund that purchase. This welder was never used in a production welding environment. It was a home garage machine used only by myself on streetrod/ automotive projects. Never abused just used. No issues ever with this machine. That's why another Miller will replace this one. Machine does have a small dent in top cover. Actually arrived that way from ups when I received it. Includes: Ground cable with dinse connector(clamp is bent up but still works fine) Flow regulator and hose to connect to back of welder. works but lenses are crumbly) Foot pedal control. The nice HD version with wide base. Works perfectly. cord has been cut and soldered and taped up, I dropped ... moresomething on it years ago. 200A Miller 26 rigid torch. Cable and the larger 200A dinse connector. Perfect for the hi-amp aluminum jobs. needs a new torch or just a replacement handle both which are cheaper than an entire assembly, cable and connector are excellent condition. 150A weldtec 17 rigid torch in nice usable condition. Includes Miller dinse connector. Gas lens setup. Owners manual and Miller welding calculator info cards. Large lot of gas lens and regular collet bodies. Collets and cups. Mostly used stuff with some new mixed in. Mostly 3/32 and 1/16 used lanthanated tungsten. Set of new never used dinse connectors to make custom cables up. Miller#144088 Dryer outlet plug so you can wire this baby up and weld! Your bid includes free insured UPS shipping anywhere in the 48 states. Buyer is welcome to pickup.
ESAB Miniarc 90i Includes leads. Used. Works great. Please see photos. CUSTOMER SERVICE If you have any questions or concerns. Send us a message on eBay and we will reply ASAP. PAYMENT INFORMATION: With listings which require immediate payment. Payments must be made through Paypal immediately after purchase. Otherwise, payment must be made within 3 days from the date the listing ends. SHIPPING& HANDLING Orders will be shipped within the US ONLY. Unless other arrangements have been made prior to purchase. We prefer to ship items through USPS but also use UPS& Fed Ex for some larger items. We only ship to Paypal verified addresses. INSURANCE If you wish. You can add security to the merchandise you purchase by paying just a little extra for insurance. In case your package gets lost or damaged during the shipping period. Please contact ... moreus immediately. Please note: Insurance purchase is optional. RETURNS& WARRANTY On most of our items. Our return policy is within 14 days. This means that the item must be returned within that period of time. You are responsible for return shipping. We will verify the serial# is correct and then refund via Paypal. FEEDBACK Feedback will be left automatically after we receive feedback for the corresponding transaction. If for some reason the item is not as described we will do our best to resolve the problem. Just give us a fair chance before leaving an improper feedback.
THIS AUCTION IS FOR A COMPLETELY REFURBISHED LINCOLN SA 200 PIPELINER WELDER. IT HAS BEEN CHOPPED DOWN 9" TO MAKE IT EASIER TO SEE OVER WHEN ITS ON THE BACK OF YOUR RIG. IT HAS AN ELECTRONIC IDLER DEVICE. AND IS SET UP FOR A REMOTE CONTROL. IT HAS MURPHY TEMP GUAGE. HAS HAD CARB KIT, AND MAG TUNE UP, NEW PLUGS AND WIRES. IT HAS NEW PAINT, NEW WIRING, AND IS VERY NICE IN APPEARANCE AND OPERATION. IT WILL RUN 3/16" 7010 LIKE CRAZY. THIS IS A VERY NICE LITTLE UNIT. ITS ONLY FLAW IS A SMALL OIL LEAK NEAR THE GOVERNOR, AND I THINK IT NEEDS A NEW GOVERNOR HOUSING GASKET OR SOMETHING SMALL LIKE THAT, JUST FEW DRIPS, NOT BAD. HAS A NEW BATTERY TOO. ITS PRETTY SLICK! I'LL PUT IT ON A PALLET AND HELP GET IT LOADED ON A FREIGHT TRUCK, BUT BUYER WILL HAVE TO PAY ALL FREIGHT CHARGES. I ACCEPT PAYPAL AND EXPECT FULL PAYMENT WITHIN 48 HOURS ... moreOF CLOSE OF BIDDING. ITS LISTED LOCALLY AND I RESERVE THE RIGHT TO END THE ACTION EARLY. THANKS FOR LOOKING!
Used but in perfect working condition.
MILLER WELDER SALES BROCHURE PAMPLET FOR MODEL 250 AC/DC-HF and 250-P AC/DC-HF gas tungsten-arc(TIG) and shielded Metal-Arc(Stick Electrode) Welding in very good condition minimal wear to cover and corners. light bends on 2 corners. interior pages nice. Minimal yellowing. 4 page pamplet See pics for condition. Do not hesitate to make us a"Best Offer" for fixed listings only) any reasonable offer will be considered. I try very hard to describe items accurately. Please read the description and view the pictures carefully and email me with any questions you might have BEFORE bidding. My goal is for both of us to be completely satisfied with the buying and selling experience. I will gladly combine shipping/handling charges for multiple purchases. Feel free to email me for an estimate. Please ask for an invoice before paying. Sold as ... moreis Your bid is a contract! Payment Instructions• Payment is due within 3 days of the close of the auction. After 4 days. If payment is not received, EBAY will automatically open a NON-PAYING case against you. EBay requests that I ask you to pay via PayPal. You may contact me BEFORE you bid if you need to make other arrangements. Shipping and Handling Policies• For items that have shipping costs. A shipping calculator has been provided to estimate your shipping costs if you live in the continental United States. See note below for international bidders. I have selected Priority Mail as the first shipping choice for this listing– ALL Priority Mail shipping includes insurance. Parcel. Media Mail or First Class shipping options are offered as additional choices, but will usually take longer to get to you and do not include insurance. We highly recommend shipping insurance for any package that may be breakable or fragile that is not shipped by Priority. Without it. Problems including loss or damaged items cannot be resolved. I do add a very small handling fee. This fee is usually from.35 cents to $1 unless the item will require extensive materials to package. Your package wi
Linde Tig Welding Equipment Manual/Catalog this is a guide to all about tig welding with info on torches. Regulators, power units, etc. 20 pages. in very good condition minimal wear to cover and corners. interior pages nice. Minimal yellowing. See pics for condition. Do not hesitate to make us a"Best Offer" for fixed listings only) any reasonable offer will be considered. I try very hard to describe items accurately. Please read the description and view the pictures carefully and email me with any questions you might have BEFORE bidding. My goal is for both of us to be completely satisfied with the buying and selling experience. I will gladly combine shipping/handling charges for multiple purchases. Feel free to email me for an estimate. Please ask for an invoice before paying. Sold as is Your bid is a contract! Payment Instructions• ... morePayment is due within 3 days of the close of the auction. After 4 days. If payment is not received, EBAY will automatically open a NON-PAYING case against you. EBay requests that I ask you to pay via PayPal. You may contact me BEFORE you bid if you need to make other arrangements. Shipping and Handling Policies• For items that have shipping costs. A shipping calculator has been provided to estimate your shipping costs if you live in the continental United States. See note below for international bidders. I have selected Priority Mail as the first shipping choice for this listing– ALL Priority Mail shipping includes insurance. Parcel. Media Mail or First Class shipping options are offered as additional choices, but will usually take longer to get to you and do not include insurance. We highly recommend shipping insurance for any package that may be breakable or fragile that is not shipped by Priority. Without it. Problems including loss or damaged items cannot be resolved. I do add a very small handling fee. This fee is usually from.35 cents to $1 unless the item will require extensive materials to package. Your package will be mailed within 3 business days of cleared
Like new condition Fronius CMT welder currently setup on aluminum mig. Fronius is the best welding system on the market today. This unit comes with a Push/Pull mig gun& Liquid Cooler. As you can see in picture#4 this unit only has 3.2 hours of use on it.Current new price on this unit is over $18.000.00. It is in excellent condition and is under power to be tried out if needed. I am located in central Indiana anyone is welcome to come and look at the unit. International Shipping: I have listed at $300.00 as a maximum for buyer. I will cover shipping upto $750.00. If the shipping cost is less than this you will not pay the $300.
Used Hobart 250 tig.model# TR 250 HF Comes with water cooled torch. Ground cable and many items unopened in a box. It is heavy so bring your truck and some help to lift! Local pick up only.
Linde Electric Welding Instructions How To Do TIG(Heliarc) Welding this is a guide to all about TIG welding with info on: Fundamentals of Process Preparation For Welding Handling the Torch Welding Data 23 pages. in very good condition very minimal wear to cover and corners. interior pages nice. Minimal yellowing. See pics for condition. Do not hesitate to make us a"Best Offer" for fixed listings only) any reasonable offer will be considered. I try very hard to describe items accurately. Please read the description and view the pictures carefully and email me with any questions you might have BEFORE bidding. My goal is for both of us to be completely satisfied with the buying and selling experience. I will gladly combine shipping/handling charges for multiple purchases. Feel free to email me for an estimate. Please ask for an invoice ... morebefore paying. Sold as is Your bid is a contract! Payment Instructions• Payment is due within 3 days of the close of the auction. After 4 days. If payment is not received, EBAY will automatically open a NON-PAYING case against you. EBay requests that I ask you to pay via PayPal. You may contact me BEFORE you bid if you need to make other arrangements. Shipping and Handling Policies• For items that have shipping costs. A shipping calculator has been provided to estimate your shipping costs if you live in the continental United States. See note below for international bidders. I have selected Priority Mail as the first shipping choice for this listing– ALL Priority Mail shipping includes insurance. Parcel. Media Mail or First Class shipping options are offered as additional choices, but will usually take longer to get to you and do not include insurance. We highly recommend shipping insurance for any package that may be breakable or fragile that is not shipped by Priority. Without it. Problems including loss or damaged items cannot be resolved. I do add a very small handling fee. This fee is usually from.35 cents to $1 unless the item will require extensive materials to
Used but in excellent condition only used several times. Please look at the pictures to see what you will get. Only ship to the 48 states Thermal Arc W1003202 95S DC Stick Package WelderPart# W1003202The Thermal Arc W1003202 95S DC Stick provides Excellent Portability! Lightweight at under 10 lbs. with easy to carry shoulder strap. Easy to use! Simple. User friendly set-up and operation. The Single Amperage Range allows the operator to accurately set the welding amperage. The 95S Stick welder provides Thermal Overload Protection this alerts the operator if duty cycle is exceeded or airflow is blocked. The W1003202 is cable& plug Fitted! Supplied with 115VAC primary cable and plug. Also the 95S Package has Twist Lock Output Terminals! 25mm dinse style allows for easy polarity changing and cable connection.Thermal Arc 95S W1003202 Includes:20 ... moreAmp adapter plug& cableTweco Weldskill style ground clamp with 10 foot lead95S Inverter Power SourceOperati
As described. Everything has been gone thru. I have 1000.00 in receipts for service done to this welder. Water cooled torch tip is brand new. See images. Add Argon and use immediately. No shipping. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-14b67fb1e36-0x104-
I got this from my relatives shop and I am selling it as I found it. As I remember. This was from his Lincoln Tig Welder, but im not sure. Take a look at the photos, you will most likely know more than I do. I am selling As/Is. It reads"TSK 35-50" on the attachment end. On the torch it reads"Magnum" on one side and"LA 9" on the other. You get everything you see in the photos. I only ship inside the U.S.
Used chiller. I have never used it but it pumps coolant and the fan blows without leaking so I'd say it's all good. I have another I bought new and kept this one around for extra.
Snap on Mig 140 combination unit. Comes with Tig attachment also. In like new condition. Not a scratch on the unit. Spec are as followed voltage 115 volts A, Frequency 50/60 hertz, Current 20/30 amps, open circuit voltage 16-34 volts dc, duty cycle time period 10 minutes, duty cycle- output power: welding current(nema) 60% 140 amps
Nice air cooled torch. Works perfect, just clamp your stinger from a DC stick welder to the brass gas connector and add argon gas and start tigging includes 1/16 tungsten and spare parts
This machine is in great shape there is one little damaged spot shown in picture caused by forklift when new comes with a water cooled gun and regulatory it is ready to go to work
USED MILLER RFCS-14 TIG PEDAL. WORKS FINE
Miller Welding Calculators This is a set of three calculators for TIG. Stick and MIG welding. Each one is double sided printed on sturdy card-stock. They store nicely in the original sleeve. The plastic has some rubbing/ marks on the front clear side. These calculators are in nice- previously owned condition. They are clean with no marks or wear.
This is an older model Miller Tig/Stick welder power source. Worked great when taken out of service several years back. The tig wand. Foot control pedal, and gas regulator has been removed but you should be able to get parts at your local welding store if you intend to use this as a tig rig. This is a high frequency machine so it will work for welding aluminum. This welder includes a shop built roll around cart and(90) l.f. of ground lead and(140) l.f. of stinger lead. The leads do have some electrical tape in places from the plastic getting nicked but are generally in decent shape. The main rheostat could stand to be replaced as well but it does work as is. All in all a solid machine that will through a powerful arc. We can load this on your vehicle for you for local pick up. If you are interested in shipping contact me with your location ... moreand I will price sending this to you via an LTL service.
This is a Miller 330A/BP that I got in an auction lot a few years back. I've never gotten around to hooking it up so although I believe it to be working it is being sold as is. The gas regulators. Tig wand and foot control pedal have been removed but both can be purchased from almost any welding supply store if you intend to use this as a tig rig. It does include the stick stinger and ground shown in the pictures. This is a high frequency machine so it can be used for welding aluminum. This is a very solid older American made machine- not cheap import B.S. it will throw an arc that puts those cheapo welders to shame! I can load this on your vehicle for local pickup. If you are interested in shipping please contact me and I will price sending this to you LTL or F.O.B. your choice of shipper.
Note:The item itself is in good condition.But there maybe a littile damage for the outside package.If u do not mind that,buy it now! Local pick up only.Do not offer shipping service! Pls email us the exact time when u will come to pick up the item! This welding cart is the perfect addition to any MIG welder or plasma cutter. It is all steel construction with a durable finish for years of use. Two safety chains secure shielding gas tanks when used with a MIG welder. The cart includes an additional storage tray for accessories and equipment and there are lead hooks on both sides for cable management. Fits most manufacturers MIG welders and plasma cutters. Assembly required. All steel construction with durable finish, Front Mounted Handle for easy maneuverability around the shop, Fits most MIG and plasma machines, Handle doesn't get in the ... moreway of leads, Two side hooks for cable storage, Extra storage tray for accessories and equipment, Includes safety chains for shielding gas tanks, Molded Heavy Duty Rear Wheels, Satin Black Powder coated finish, Total Height- 29" Total Width- 15" Total Length(not including Handle) 28" Total Length(including Handle) 34" Top Shelf Width- 11" Middle Shelf Width- 11" Bottom Shelf Width- 11" Top Shelf Length- 18" Middle Shelf Length- 15" Bottom Shelf Length(total) 26.4"
THIS IS NICE MANUAL REAL DEAL! MILLER TRAILBLAZER 302 DIESEL OWNER MANUAL.OM-217454B ISSUED SEPT. 2005 FREE SHIPPING!
This listing is for 1 Welder. Unit is used. But it does work fine no problems or damage, other than wear from use. Comes as shown, condition is also shown in the pictures. We do combine shipping on multiple items. We accept paypal(preferred) If you have any questions or concerns, please call 256-894-9994 during business hours: 8am-6pm 7 days a week.
Weldmark adjustable argon& co2 gas regulator tested and working these are the type used for tig and mig welding good working order has very little use. Tested and working. NO RESERVE AUCTION FAST SHIPPING 👍
Weldcraft TIG Torch Accessories Kit Parts included work with WP-9. WP-9P, WP-20, WP-20P, and WP-25P Do not know if there are any quantities missing from when originally new but what remains appears to be in good usable condition. No returns No International shipping Questions call 717-808-0953 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-14b760af7da-0x10d-
I have here for auction this small three handled tig with the coat of arms for London and a picture of London Bridge on it made by Gemma China. It's 1.5" tall and 2.25" across. It comes in very good condition with no damage. Please see my pictures for the backstamp.
I bought this welder new in 2009. But have used it very little. It is in great condition, and in perfect working order. The hour meter reads 4 hours and 39 minutes of total use. The stick electrode holder has never been used. Includes extra consumables, and also a 3-ring binder that has the 48 page Owners Manual, welding tips, and welding guidelines. Because of the weight, I will not ship this welder. I have a chain hoist in the ceiling of my garage, so the welder can easily be lifted on to a trailer, or in the bed of a pickup truck. Specs: Light Industrial Applications: Light Metal Fabrication. Maintenance/Repair Operations, Light Manufacturing, Automotive Repair, Vocational Training, Hobbyist. Processes: TIG(GTAW) Stick(SMAW) Pulsed TIG(GTAW-P) Air Carbon Arc(CAC-A) 5/32-in. maximum. Input Power Requires 1-Phase Power Amperage Range 5– ... more200 A Rated Output 150 A at 26 V. 40% Duty Cycle Total Weight w/Runner Package 271 lb. 123 kg) Syncrowave ® 200 Runner Package#907 308-00-1 208– 230 V. 50/60 Hz Includes Syncrowave 200, No. 39 running gear, 150-amp WP1712MFD150 Weldcraft torch with quick-connect, 12-foot(3.7 m) work cable with clamp and quick-connect, electrode holder with quick-connect, RFCS-14 remote foot control with 20-foot(6 m) cord, Smith regulator/flow gauge, gas hose and 8-foot(2.4 m) primary cord. Squarewave output with AC balance control features adjustable cleaning action while increasing arc stability on various aluminum alloys. And helps eliminate tungsten spitting and arc rectification. Cable management system uses dual cable hangers and foot control storage conveniently attach to the power source side panels to allow all weld cables and the remote foot control to be neatly stored. Preventing torch, cable or remote damage. Syncro Start ™ allows the operator to choose from three different starting conditions to optimize the application(Soft/Standard/Hot) Running Gear has low cylinder rack to eliminate the need for lifting when changing gas cylinders. Fan-On-Demand ™ improves power e
For sale is a Miller Syncrowave 200 TIG/stick welder that comes with an accessory kit and short bottle. Requires 230 volt power. 200 amp machine, weighs approximately 300 lbs. in excellent used condition. Comes with accessory kit and includes(1) regulator and hose, 1) 14-pin foot control, 1) 12' ground cable with clamp and lug, 1) 10' stinger lead for stick welding(1) 10' air-cooled TIG torch and cylinder chain. This machine is an air-cooled TIG welder with cylinder cart already attached. Local pickup only due to the weight of the machine and what it would cost to ship. Great machine like new and has maybe one hours total use time. Also comes with plethora of sticks in both metal and aluminum with an assortment on tungsten and cups. If you are looking at this auction you know what you are looking for and know what you are looking ... moreat. You can get more information at the Miller website and can view owners manual. Pick up only.
Used. Works great Comes with what you see in pictures. Converter
This hose has never been used. It is listed as used due to no packaging and discoloration on end.
USA BIDDERS ONLY NO INTERNATIONAL BIDDERS You are bidding on a 2014 cryptozoic sons of anarchy wardrobe relic lot of 7 in this lot you will get the following cards: M03 Tara Knowles. M04 Gemma Teller. M06 Opie Winston. M07 Bobby Munson. M08 Juice Ortiz. M09 Gemm Teller. M10 Tig Trager. The cards are in NM-MT condition or better. Just look at the scan the winner will be pleased. Winner Please add 5$ for shipping. Additional items purchased will be $1 for each extra single card. Card lots will be more. Forms of Accepted Payments: PAYPAL ACCEPTED ONLY IF YOU HAVE A CONFIRMED ADDRESS. Thanks and good luck and be sure to check my other auctions to save on shipping. Powered by The free listing tool. List your items fast and easy and manage your active items.
Included with the welder: Ground Cable TIG Cable Unused SAW Cable Unused Water Cooled TIG Head. Cable and pump unit(WeldTec Model 1) Foot Petal. Best Guess is that it has less than 100 Hours of welding on it. Seller is not the manufacturer of the equipment. And as such does not make any warranties regarding the equipment or its suitability for any purpose. Seller will provide a refund only in the event the equipment fails to comply with the above description. Return shipping is Buyers responsibility. Will allow ship if the Buyer is responsible for all Crating and Shipping.
Walbrzych Spring Glen 7 1/2" Salad Plate Made in Poland TIG In Very Good Condition with No Cracks or Chips. Has a tiny little wear on the gold trim that is due to some use. Measures 7 1/2" in diameter Pattern Spring Glen Gray Ferns.Leaves and Pink Flowers On Bottom Walbrzych Made in Poland Trimmed in Gold and Scroll Embossed We ship out the next business day. Mon-Thurs. Item purchased on Friday Sat or Sun. will be shipped out on the following Monday unless it is a holiday. If you have any questions please feel to email us. Thanks for stopping by.
Walbrzych Spring Glen Cup& Saucer Made in Poland TIG In Very Good Condition with No Cracks or Chips. Has a tiny little wear on the gold trim that is due to some use. Cup Measures 4 1/2" W to end of Handle X 2 1/4" Tall Saucer Measures 5 1/2" in diameter Pattern Spring Glen Gray Ferns.Leaves and Pink Flowers On Bottom Walbrzych Made in Poland Trimmed in Gold and Scroll Embossed We ship out the next business day. Mon-Thurs. Item purchased on Friday Sat or Sun. will be shipped out on the following Monday unless it is a holiday. If you have any questions please feel to email us. Thanks for stopping by.
Walbrzych Spring Glen 8 1/4" Soup Rim Bowl Made in Poland TIG In Very Good Condition with No Cracks or Chips. Has a tiny little wear on the gold trim that is due to some use. Measures 8 1/4" in diameter Pattern Spring Glen Gray Ferns.Leaves and Pink Flowers On Bottom Walbrzych Made in Poland Trimmed in Gold and Scroll Embossed We ship out the next business day. Mon-Thurs. Item purchased on Friday Sat or Sun. will be shipped out on the following Monday unless it is a holiday. If you have any questions please feel to email us. Thanks for stopping by.
Lincoln Power Wave S350 Stick. DC TIG, Pulsed DC TIG, MIG, Pulsed MIG, Flux-Core power feed 10m control mig gun Buyer is responsible for all shipping we can palletize per your requirements
Includes all accessories in images. We(seller) will cover freight shipping of item on a standard pallet. Free shipping for continental 48 USA States ONLY! We will NOT ship item to Hawaii or Alaska!
LIKE NEW came from a 1 man shop( MINE) works perfectible.All ways used in doors kept clean and serviced. Never had any repairs or problems or modification! runs on 230-240-460 volt single phase has the pulsar nice for aluminum and stainless The optional SP-34 timing controller is known( i think)as the collide a scope with remote control cost $3500.00 to add to this welder when this machine was new its helpful on aluminum welds and stainless steel PLEASE call 770-519 2567 or email if you have questions This item must be crated for shipping and will only ship insured I do have a fork lift/loading dock and trailer for deliver if needed call or email for cost. The cart in the picture is not part sale! But available I have a miller foot control RFC14. 350 AMP torch(BRAND NEW)used in nice shape MILLER cool mate 3 TIG cooler, GROUND CLAMP WITH 25 ... moreFOOT LONG CABLE, and hoses in good condition if interested in any of these please email me, to discuss price if needed I have used and owned several Tig welders and Miller SYNCROWAVE'S is by far the best! the welds come out FANTASTIC! The 500.00 Shipping charge is only a estimate. It could be more or LESS.just depends were it ships too.
Included in the Auction: Used Lincoln Invertec V155-S Welder PTA-17FV Welding Torch with cord attached K960-2 Small Twist Mate™ Torch Adapter Welder is in good used working condition. If you have any questions please ask.
Welding fine extractor works great comes with hose and duct any question feel free to ask or call 517 937 3298
Walbrzych 6 3/4" Spring Glen Bread& Butter Plate Made in Poland TIG In Very Good Condition with No Cracks or Chips. Has a tiny little wear on the gold trim that is due to some use. Measures 6 3/4" in diameter Pattern Spring Glen Gray Ferns.Leaves and Pink Flowers Trimmed in Gold On Bottom Walbrzych Made in Poland Trimmed in Gold and Scroll Embossed We ship out the next business day. Mon-Thurs. Item purchased on Friday Sat or Sun. will be shipped out on the following Monday unless it is a holiday. If you have any questions please feel to email us. Thanks for stopping by.
Weldcraft TIG Torch WP 17V and 23 Feet of Hose. Unknown working condition. The sleeve handle is loose on the torch. PayPal Only. Payment due within 5 days of auction close. Thank You.
Weldcraft TIG Torch WP 17 and 23 Feet of Hose. Unknown working condition. PayPal Only. Payment due within 5 days of auction close. Thank You.
Brand NEW items- FREE standard shipping- Easy returns NEW Blue Demon ER120S1-063-10T Box High Strength and Ductility Tig Welding Rod Our price $67.98 $91.95 NOW ONLY Two-day shipping only $5.95 Overnight shipping only $15.95 This alloy is used for a variety of steels where high strength and ductility are critical. It is designed to provide high notch toughess. Yield strength and impact resistance. Typical applications include welding all steels in the 100.000 psi range including T-1 and HY100- Lifting and handling machines. Bridges, tanks, transport- Shipbuilding. Railway secor, mines, vibrant sieves, tank lorries We currently accept Paypal only. Immediate payment required. We offer free Standard shipping within the continental U.S. We ship to addresses in the U.S. only. Not including APO/FPO Alaska, Hawaii and US Protectorates addresses. ... moreWe cannot accept P.O. Boxes. Please provide a physical address and check that it's the right address before purchasing. We usually ship our items in 1-2 business days from receiving the payment. Standard free shipping: takes between 3- 5 business days. Expedited shipping: takes between 2- 4 business days. Overnight shipping: takes between- 1- 3 business days(Ships in 13 hours) We use a selection of shipping services as USPS. Laseship, FedEx Etc. We always pack our items carefully to prevent any damage during the delivery and protect your purchase as much as possible. When your order is shipped. We will email you the tracking information including a tracking number and the delivery estimated date, to help know when to expect your order. We accept returns within 14 days from the date of receiving the item. If you want to return an item. Please don't hesitate to contact us, we will guide you and give you the instructions. When we get the item back, we will grant you a full refund or replacement- whatever you requested. As veteran sellers we are committed to your satisfaction. We are here to provide you the best prices. The most quality items and the most human
25 foot cable. Genuine Miller. Used in clean shop. Checked out and ready to go. Fits older Miller TIG welders: Maxstar 150(Not 150S. Not 150 STR or STH) HF-250D-1, and HF-250-1, HF-250-2. Also works with the SynchroWave 300 and can be used with an adapter on 14 pin machines. It's plug and play for ONLY the welder models listed.
Check out our other listings. We can combine shipping. Contact us for an invoice on multiple items for shipping discounts.