In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
250.00
Buy It Now
Free Shipping
Condition: New
Location: Schaumburg, United States
10PCCAT40 ER32 Collet Chuck with 12PC ER32 Collets Set Free HAAS Pull Studs. 10PC CAT40 ER32 Collet Chuck. Gage or projection length of ER32 Chuck is ... more2.75 ". 12PC ER32 Collets 12PC ER32 collets Size: 1/8"; 3/16"; 7/32, 1/4"; 5/16"; 3/8"; 7/16"; 1/2"; 9/16"; 5/8"; 11/16"; 3/4".
$
71.95
Buy It Now
$5.95 Shipping
Condition: New
Location: Tullahoma, United States
$
19.29
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
| | | | | | | Part# ALL-47204, Grips bar with extreme rigidity; cuts smoothly without chatter. Equipped with a split bushing to accommodate a boring bar ... moreof smaller diameter. Holds 3/4" tool with bushing. 1" diameter without bushing, Interchangeable with Dorian. Aloris, Phase II BXA series tool posts. While we guarantee your satisfaction, these especially work best with our matching tool posts, Precision ground and hardened. Completely sealed for maintenance free operation, Shipping weight- 3.5 lbs. Looking for more? Additional BXA holders. Tool posts, boring bar sets, collets, and the very best lathe tooling values are available in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote We combine shipping! Purchase via But-It-Now and we'll send you a combined shipping invoice) 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local pos
$
18.79
Buy It Now
$7.75 Shipping
Condition: New
Location: Huntington Beach, United States
| | | | | | | Our part# ALL-44022, Holds any 1" round tool shank, Hardened and ground for durabilty and superior performance, Crafted from alloy ... moreforged tool steel, For Bridgeport type milling machines(or any others with a R8 spindle) Drawbar End Thread: 7/16"20, We combine shipping! Complete the buy it now and we'll send you a combined shipping invoice to pay from, For additional sizes. Sets, and great pricing on end mills please visit the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees) While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and international addresses, there may be a fee to do so. Should you have any further ques
$
29.95
Buy It Now
Free Shipping
Condition: New
Location: Byron Center, United States
Quantity: 10 Inserts. Inserts are NEW and have not been used.
$
15.99
Buy It Now
Free Shipping
Condition: New
Location: San Diego, United States
Model of holder: SRAPR1616H10. Model of insert: RPMT10T3MO. 1pc x lathe blade holder. Size of holder: approx. 16 16 100mm. Heat Shrink. Thickness of inserts: ... moreapprox. 10pcs x inserts.
$
26.99
Buy It Now
$11.80 Shipping
Condition: New
Location: Saint Charles, United States
SHARS 14-20" CA Quick Change Tool Post Boring Turning Facing Holder#2 250-402 for Lathe Swing 14-20" Piston Type Or Wedge Type Tool Posts Sets ... moreFits Aloris. Dorian, Phase II, Yuasa, NEW 202-9409A. Type: 402, A: 1-11/16, B: 1, C: 3/4, D: 2-1/2, Tool bit: 1/2-1, Shank: 13/16, V" groove holds round shank boring bars and tools as well as square tool bits, Dovetail Dimensions: H: 0.555" L1: 2.201" L2 1.564" MODEL NUMBER SHARS NUMBER HOLDER SIZE MATCHING TOOL POST 250-102 202-9406 AXA PISTON 202-9461(251-100) WEDGE 202-9474(251-111) 250-202 202-9407A BXA PISTON 202-9462(251-200) WEDGE 202-9475(251-222) 250-302 202-9408A CXA PISTON 202-9463(251-300) WEDGE 202-9474(251-333) 250-402 202-9409A CA PISTON 202-9464(251-400) WEDGE 202-9478(251-444) We also offer BXA 10-15" piston quick change tool post set(p/n 202-9462A) We also offer BXA 10-15" wedge quick change tool post set(p/n 202-9475A) We Also Have Other Size of Boring. Turning& Facing Holder#2 Available at My Ebay Store. Please Contact Us for More Information and Prices! Type A B C D Tool bit Shank Product 202-9408A CXA 1-7/16" 3/4 5/8 2-1/8 1/2-3/4 3/4 Product 202-9409A CA 1-11/16 1 3/4 2-1/2 1/2-1 13/16 1-630-443-3244 Please direct any questions to our eBay Message Box. SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept VISA. Master, Discover, American Express and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipp
$
32.99
Buy It Now
$11.99 Shipping
Condition: New
Location: Burbank, United States
CHARCOAL BLACK COLOR 5-C COLLET RACK. HOLDS 32 COLLETS, STANDARD& EMERGENCY ORGANIZER FOR ALL KIND OF MACHINES. CONVENTIONAL OR CNC APPLICATION The ... moremost affordable way to storage and organize your Collets guaranteed! affordable does not mean cheap made. This is a 100% USA Products, Proudly made in California with a thickness of a 1/4" Ø Introducing our 5-C special compact design collet Organizer Ø accommodates up to 32 collets type 5-C(tools not included) ü Designed for carry-on. Storage or to transport on any Standard(16 x 30) Utility Cart. Cart not included) 5-C COLLET CADDY ORGANIZER FOR ALL KIND OF MACHINES. CONVENTIONAL OR CNC APPLICATION The most affordable way to storage and organize your Collets guaranteed! Ø Our 5-C Rack has a special compact design to serve as Collet Organizer and storage device. Compact size can easily be carried fully loaded. H 5-C Rack Holds up to 32 special Shape or Heavy Collets. Not to forget your standard collet set. tools not included) Excellent diagonal hole pattern designed for easy collet access Dimensions are 4 3/4" H. X 6 7/8" W. X 15 3/4" L. ü Designed to hold your special emergency collets or your standard set at an affordable cost. Our 5-C COLLET TRAY FOR LATHE MILL GRINDER HOLDS 32 COLLETS. Acomodates any 5C collet, even the ones with large diameters or special shapes. It's great for your special collets and more. ü ü 1/4" thick and sturdy Styrene Plastic Construction will support up to 100 lbs. Gray color for better visual tool contrast. Easy lifting by using the side ears for portability ü ü 100% MADE IN U S A ü Life Time Warranty. ü 100% satisfaction guarantee. Thousands of satisfied buyers can not be wrong. Please read about satisfied customers on the feedback history. check on other products from us. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13e1835f11d-0xf4-
$
34.99
Buy It Now
Free Shipping
Condition: New
Location: Pinellas Park, United States
$
85.00
Buy It Now
Free Shipping
Condition: New
Location: South Milwaukee, United States
Introducing the 1 PIECES, ALLIED MACHINE, T-A 3" 455H-0300 CARBIDE INSERTS, perfect for use in a variety of industrial and manufacturing settings. These ... morehigh-quality inserts feature a durable carbide construction and are designed to meet the demands of even the toughest of projects. With the brand name Allied and insert material of carbide, you can trust this product to deliver outstanding performance and reliability. This item falls under the categories of Business & Industrial, CNC, Metalworking & Manufacturing, Workholding & Toolholding, Toolholding, and Indexable Inserts. Don't miss out on the opportunity to add these inserts to your tool collection.
$
28.99
Buy It Now
Free Shipping
Condition: New
Location: United States
(E.g. you brought wrong model or wrong color).
$
37.55
Buy It Now
Free Shipping
Condition: New
Location: Saint Charles, United States
1" X 6" RH MVJN INDEXABLE CONTOURING PROFILING TOOL HOLDER VNMG NEW. MODEL STYLE - TOOL HOLDER MVJN R-16-3D. Accepts these square insert: VNMG, VNMP, ... moreVNMZ. For Contouring and Profiling. Negative rake.
$
23.00
Buy It Now
Free Shipping
Condition: New
Location: Madison Heights, United States
Knurling Tool 7pc Kit 3/8x4" Shank 6 HSS knurls included IN-GHT-7445 --newKnurl patterns included:Straight Pattern: Coarse, Medihm, FineDiamond Pattern: ... moreCoarse, Medium, FineKnurl wheel diameter 5/8”Knurl wheel thickness 1/8”
$
329.94
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
50mm boring facing head Bore range:60mm-220mm Suitble for: TDG50 Portable line boring machine/50mm diameter Boring Bar.
$
179.95
Buy It Now
$10.95 Shipping
Condition: Used
Location: Tullahoma, United States
Cutter is in great condition! Has been slightly modified by relieving the neck of the tool and grinding a flat onto the shank. Insert Type: AOMT 1236 ... more.
$
63.59
Buy It Now
Free Shipping
Condition: New
Location: Metairie, United States
$
200.00
Buy It Now
$5.85 Shipping
Condition: New
Location: Spring, United States
Upgrade your machining with Tungaloy's XCET310404ER AH120 indexable inserts. These high-quality inserts are perfect for CNC, metalworking, and manufacturing ... moreapplications. With five inserts in stock, you can be sure to keep your workholding and toolholding operations running smoothly. Please note that this product contains chemicals known to the State of California to cause cancer, such as cobalt (7440-4-84). To ensure your safety, it's important to use adequate ventilation and read the applicable safety data sheet. Avoid grinding the product to prevent hazardous dust. Don't let the perfect machining solution pass you by, order now!
$
35.15
Buy It Now
$10.40 Shipping
Condition: New
Location: Chino, United States
Why should you buy from us? We exceed Ebay's standards for quality and service. We are an Ebay Star Seller and have over 16.000 unbiased positive ... morefeedback from unique Ebay buyers. Get It Quick! We ship 97% of all in-stock orders within 1 business day! AIR. POWER& HAND TOOLS CUTTING& CARBIDE TOOLS MACHINE TOOL ACCESSORIES MRO& SHOP SUPPLIES PRECISION MEASURING TOOLS Thank you for shopping with us! Description Shipping Payment Return Policy Our products carry a one year warranty and combined shipping is available. Please use Buy it Now and commit to purchasing the items you need without paying. Contact us when you are done and we will send you a combined invoice with the cheapest shipping rate we can find for you. 3/8" Shank S-SCLCR6-2 Indexable Boring Bar With Insert 7° Relief angle. Negative 5° Lead angle for boring. 3° Side& end cutting edge angle. Torx wrench T-8 included. Utilizes CCMT-21.5 80° diamond inserts. CCMT insert included. Replacement Inserts are the CCMT-21.51(6003-5021) Dimension style S06M-SCLCR2 Set/Style B Diameter x Overall Length 3/8 x 6" Minimum Bore.500" Screw size is M2.5 X 8 This is a profiling bar for semi-finishing and finishing operations. Combined Shipping Available- Please use Buy it Now and commit to purchasing the items you need without paying. Contact us when you are done and we will send you a combined invoice with the cheapest shipping rate we can find for you. For freight shipments. Please contact us with your complete delivery address including the zip code for an accurate quote prior to your purchase. PayPal is preferred for immediate shipping. We also accept major credit cards including Master Card. Visa, Discover and American Express. To pay with a credit card without using Paypal. Please contact us and provide us with your phone number. We will call you to get your payment information. Return policy details: Please email us for a Return Authorization prior to returning merchandise. All items must be in original packagin
$
50.00
Buy It Now
Free Shipping
Condition: New
Location: Schaumburg, United States
10PC Quality Pull Stud / Retention Knob Fits on any HAAS CAT40 CNC V Mill. Can be used on both spindle coolant through and non-coolant through HAAS CAT40 ... moreV mill. Fits on any HAAS V mill, like VF, mini mill, EC, ES, etc.
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: South El Monte, United States
3pcs MT1 to MT2 MT2 to MT3 MT3 to MT4 Morse Taper Adapter Reducing Drill Sleeve. 3pcs MT1-MT2 MT2- MT3 MT3-MT4 Morse Taper Adapter Reducing Drill Chuck ... moreSleeve. MT3 Spindle to MT1 Arbor Morse Taper Adapter Reducing Drill Sleeve For Lathe New.
$
49.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
Shank Length: 3-7/8".
$
16.74
Buy It Now
$10.65 Shipping
Condition: New
Location: Eastlake, United States
NEED PARTS FOR YOUR BRIDGEPORT?. PART # 002-0217.
$
350.00
Buy It Now
Free Shipping
Condition: New
Location: Schaumburg, United States
CAT40 5PC ER32 3PC ER16 COLLET CHUCK WITH 12+7PC ER32 AND 10PC ER16 COLLETS TOOLING PACAKGE. 5PC CAT40 ER32 Chuck. 3PC CAT40 ER16 Chuck. Fit On Any HAAS ... moreCAT40 Spindle. Both ER32 and ER16 Chuck Gage or projection length of ER 16 is 2.75".
$
9.09
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Caution: Minor differences in product design may result in different model numbers. Please check the picture carefully to see if it matches your product. ... moreIf you are not sure if this model is right for you, please feel free to contact us. Features: Morse Taper #2 (2MT) to 1/2"-20 thread. Long end is 2MT, short end is 1/2"-20. Made of precision ground, high grade tool steel.. Arbor will fit all threaded drilled chucks that with a 1/2"-20 thread bore and will fit on any machine tool with a 2MT spindle. .
$
54.99
Buy It Now
Free Shipping
Condition: New
Location: Pinellas Park, United States
$
21.50
Buy It Now
Free Shipping
Condition: New
Location: New York, United States
4pcs T8 wrenches. The tool holders and boring bars: 6mm+7mm+8mm+10mm shank ,95 degrees cutting edge angle ,42CrMnTi substrate with blackened finished, ... morehigh strength, high stiffness, good cushioning performance;.
$
14.99
Buy It Now
$6.25 Shipping
Condition: New
Location: Nescopeck, United States
Steel Bushing/Standoff /Spacer/Sleeve 1" " OD x 7/16" ID, x 4" Long Steel . OD tolerance -.005. ID tolerance +.005.ALL OF MY PARTS ARE MADE BY MYSELF, ... moreIF YOU NEED A CHANGE ON DIMENSIONS JUST MESSAGE ME
$
29.33
Buy It Now
$10.65 Shipping
Condition: New
Location: Largo, United States
1 Pint (16 OZ) of Castrol Moly-Dee Oil. 1 Pint of Moly-Dee Oil. High Performance tapping fluid. See Part #CAS-156F2C for Gallon Size.
$
29.75
Buy It Now
Free Shipping
Condition: New
Location: Saint Charles, United States
5/8" X 4" RH SCLC R/L INDEXABLE TURNING TOOL HOLDER CCMT NEW 404-1827. Model# SCLCR 10-3B, A sq: 5/8" C: 4-1/2" F: 3/4" CCGT. ... moreCCMT Insert: 32.5, Style L, Negative 5 degree end or side cutting edge angle for positive 80 degree diamond CCMT insert, Insert not included: We also offer high performance carbide inserts: CCMT 32.51 HM YBC251 w/ Finishing chip breaker(PART#424-1028 $3.16) Insert Size: 32.51, IC: 3/8, Thickness: 5/32, Thru Hole: 0.17, Radius: 1/64, Insert Grade: YBC251, Chip Breaker: HM, Material: Carbide, Coating: CVD Tin Al2O3 TICN, Machining Parts Material: Steel Alloy, Machining Process: semi-finish/medium, Material Group Material Type Examples ISO Code Cutting Application Steels& Alloy. Alloy steels. Tool and die steels, ferritic/martensitic steels. 1020. 1050, 4140, 4340, 8620, P20 P10- P35, semi-finish/Medium, Stainless Steel Ferritic/Martensitic. Austenitic, Austenitic/Ferritic(duplex) 301. 303, 304, 304L, 316L M20- M35, semi-finish, Steel Alloy Optimal(Min- Max) Cutting Speed Vc(SFM) 1049(853- 1312) Feed Rate(inch/rev) 0.009(0.004- 0.019) Depth of Cut(inch) 0.078(0.019- 0.118) Stainless Steel Cutting Speed Vc(SFM) 590(393- 853) Feed Rate(inch/rev) 0.009(0.004- 0.019) Depth of Cut(inch) 0.078(0.019- 0.118) YBC251 Coating Grade. Tin. Al2O3. TiCN Carbide Substrate Surface with Tin coating to reduce friction and easily identify worn out spot, Special structure Al2O3 layer forming a thermal barrier to protect insert from Anti-plastic deformation during high speed try cutting, TiCN layer has high wear resistance characteristic, Carbide substrate form by special crystal structure to increase the rigidness of the core base and thermal stability at high temperature, YBC251 consist of tenacious carbide substrate with strong cutting edge and optimal layers of MT-TiCN. Thick layer of Al2O3, Tin Coating. It's suitable for general purpose on wide range of material: finishing. Semi-finishing and light roughing of steel, cast steel and stainless steel. HM Chip Breaker preferred c
$
19.90
Buy It Now
Free Shipping
Condition: New
Location: New York, United States
Mainly used for grooving and cut off, suitable for processing steel and 45#steel etc.
$
89.95
Buy It Now
$5.95 Shipping
Condition: New
Location: Tullahoma, United States
$
29.95
Buy It Now
Free Shipping
Condition: New
Location: Byron Center, United States
Quantity: 10 Inserts. Inserts are new and have not been used.
$
19.99
Buy It Now
Free Shipping
Condition: New
Location: Bradenton, United States
10 pcs Mitsubishi Dia Edge CCMT 21.51 / CCMT 060204.
$
18.95
Buy It Now
$6.45 Shipping
Condition: New
Location: Sheboygan Falls, United States
R8 Collet Organizer Bridgeport type R-8 collet storage rack with engraved easy to read size labels. Partial list other collet racks available: 5C, TG100, ... moreTG75, ER40, ER32, ER25, ER20, ER16, ER11, DA180, DA200, 6K, TF-20, TF-25, and Tap & TapDrill Storage Racks.
$
68.99
Buy It Now
$6.99 Shipping
Condition: New
Location: Aliso Viejo, United States
NEW 10PCS. CARBIDE INSERTS. TNMC-43NV. GRADE: C5. We combine multiple orders if it fits in the same box and within certain weight. WE CARRY LARGE INVENTORY ... moreOF CARBIDE INSERTS(TURNING. MILLING, THREADING, GROOVING, ALUMINUM) DRILLS, BURRS AND CARBIDE ENDMILLS. FOR INQUIRY CALL US AT 951-454-7872 OR E-MAIL US. Normal 0 false false false EN-US X-NONE X-NONE. PLEASE REFER TO OUR WEBSITE carbidenow.com FOR THE COMPLETE LIST OF ITEMS WE CARRY. SALE– 10 TO 50% OFF REGULAR PRICE. ASK FOR CURRENT SALE PRICE. BEFORE PAYING. PLEASE ASK FOR SHIPPING DISCOUNT ON MULTIPLE ITEM PURCHASE AND $$ SAVE $$. ALSO, PLEASE CALL OR E-MAIL IF YOU HAVE ANY QUESTIONS OR CONCERNS ON SHIPPING& HANDLING.
$
7.00
Buy It Now
Free Shipping
Condition: New
Location: Palo Alto, United States
$
74.99
Buy It Now
Free Shipping
Condition: New
Location: Naperville, United States
$
32.14
Buy It Now
Free Shipping
Condition: New
Location: Jamaica, United States
INDUSTRIAL WHEEL TYPE KNURLING TOOL. INDUSTRIAL 2 WHEEL CLAMP KNURLING TOOL.
$
16.00
Buy It Now
$5.95 Shipping
Condition: New
Location: Delphi, United States
Convenient storage option for your AXA tool holders. 3" center hole spacing allows for mounting on most surfaces,including peg board. Most often PLA+ ... moreor PETG.
$
25.00
Buy It Now
$6.00 Shipping
Condition: New
Location: Warren, United States
9 NEW KENNAMETAL NGD4M500RK PVD AlTiN COATED SOLID CARBIDE TOP NOTCH GROOVING INSERT. 9 PCS BRAND NEW OUT OF BOX.
$
42.52
Buy It Now
Free Shipping
Condition: New
Location: Bronx, United States
Used for Turning internal hole, reaming, copying,etc. Specially used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine. ... moreIf you did not receive our reply. - If you receive an item and it doesn't work properly or you don't like it because of any reason at all.
$
14.72
Buy It Now
Free Shipping
Condition: New
Location: Solon, United States
Morse Taper Shank Drill Chuck Arbor w TANG. Precision Ground. Taper Shank. Made of High-Quality Steel.
$
42.99
Buy It Now
Free Shipping
Condition: New
Location: Homestead, United States
Using the dial, operations with extension units, can be processed various angles workpiece. Replace the tool holder high positioning accuracy, reset accuracy ... morewithin 0.004mm range, the surface quality of machined parts, precision improved.
$
16.90
Buy It Now
Free Shipping
Condition: New
Location: China
Model :CCMT060204 BP1125. We have any machine tool insert, HOLDER, machine tool accessories, all kinds of price, high-end, low-end, a large number of ... morespot. We will not cheat any of our. s After sales problems and solutions.
$
7.49
Buy It Now
$4.00 Shipping
Condition: New
Location: Huntington Beach, United States
| | | | | | | Our part# ALL-49700, Works great with our threaded drill chucks! See link below to Ebay store, Morse Taper#1(1MT) to 3/8"24 thread, ... moreMade of high grade tool steel, Need more arbors? We stock the widest selection of arbors and chucks on Ebay(see link below to our store) 1MT. 2MT, 3MT, 4MT, 5MT, R8, 3/8" 1/2" 5/8" 3/4" 1" NMTB30, NMTB40, NMTB50, Great deals on drill chucks. Arbors, drill bits and more in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees) While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and international addresses, there may be a fee to do so. Should you have any further questions r
$
9.13
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
| | | | | | | Our part# ALL-49706, Works great with our threaded drill chucks! See link below to Ebay store, Morse Taper#2(2MT) to 1/2"20 thread, ... moreMade of high grade tool steel, Need more arbors? We stock the widest selection of arbors and chucks on Ebay(see link below to our store) 1MT. 2MT, 3MT, 4MT, 5MT, R8, 3/8" 1/2" 5/8" 3/4" 1" NMTB30, NMTB40, NMTB50, Great deals on drill chucks. Arbors, drill bits and more in the Contact us for custom quotes. Quantity discounts, or international shipping options. We pride ourselves on the best service, fastest shipping, and lowest pricing in the industry! Ships from USA- same day if ordered before 7:30PM EST(fastest shipping on Ebay! We also sell custom tooling packages! Call or email for a fast quote New machine or tooling up for a big job? Contact us for best pricing guarantee! 100% Satisfaction Guaranteed! Contact/ Location Corporate Offices/Warehouse 5488 McFadden Avenue Huntington Beach. CA 92649. We Welcome Your Requests(714) 897-1700 Quotes. Questions& Customer Service Line(714) 886-1622 Fax Hours of Operation 8:00AM- 5:00PM PST Monday- Friday 8:00AM- 1:00PM PST Most Saturdays Closed Sundays. We welcome and accept will call orders for most of our listings. However we do require that you contact us prior to pick-up. Payments For questions regarding credit card and/or mail order shipments. Please call us at 714-897-1700. Send PayPal payments to paypal@allindustrialtool.com. Shipping We pride ourselves on the providing the fastest shipping times possible! Unless otherwise indicated. All items will be shipped within 1-2 business days after full payment is received(same day if possible) For international orders, buyers are fully responsible for duties and custom fees which may be charged upon delivery(please contact your local post office to determine estimated taxes and duty fees) While we can ship to P.O. boxes, Hawaii, Alaska, Puerto Rico, and international addresses, there may be a fee to do so. Should you have any further questions r
$
38.85
Buy It Now
$11.80 Shipping
Condition: New
Location: Saint Charles, United States
THREADING GROOVING CATEGORY Boring Bars. Fully interchangeable with other similar "notch" type tools and inserts. center to insert cutting edge f 0.563. ... moreCUTTING DIRECTION Right Hand. OVERALL LENGTH 10.
$
42.00
Buy It Now
Free Shipping
Condition: New
Location: Mission Hills, United States
Brand new 10pcs CNMG120408-TF IC907 CNMG431-TF IC907 CNC Carbide Inserts for steel.
$
30.55
Buy It Now
Free Shipping
Condition: New
Location: Saint Charles, United States
1/2" X 3-1/2" RH CTAP INDEXABLE TURNING TOOL HOLDER TPG NEW 404-1509. Model# CTAP R-08-2J, Shank Size Square: 1/2" Overall Length: 3-1/2" ... moreInsert I.C: 1/4" T: 1/8" Finger clamp# CL-6, Locking pins# XNS-0517 Insert not included For Turning or Facing to shoulder. Positive Rake, 0 degree cutting edge angle, Accept TPG. TPU, TPMR inserts Insert not included: We also offer high performance carbide inserts: TPGN 222 YBC151 w/ Finishing chip breaker(PART#424-1800 $3.60) Insert Grade: YBC151, Material: Carbide, Coating: CVD Tin Al2O3 TICN, Machining Parts Material: Steel Alloy, Machining Process: semi-finish/medium, Material Group Material Type Examples ISO Code Cutting Application Steels& Alloy. Alloy steels. Tool and die steels, ferritic/martensitic steels. 1020. 1050, 4140, 4340, 8620, P20 P10- P35, semi-finish/M, YBC151 Coating Grade. Surface with Tin coating to reduce friction and easily identify worn out spot, Special structure Al2O3 layer forming a thermal barrier to protect insert from Anti-plastic deformation during high speed dry cutting, TiCN layer has high wear resistance characteristic, Carbide substrate with excellent wear resistance, YBC151 consist of good wear resistance carbide substrate with optimal layers of MT-TiCN. Thick layer of Al2O3, Tin Coating. It's suitable for finish to semi-finish on alloy steel and tool steel. All Available to Ship NOW! at Fixed Prices Email: DISCOUNTMACHINE@AOL.COM SHIPPING: UPS Ground Buyer pays ACTUAL UPS shipping& insurance. And a $2.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii. Alaska& and other United States Territories will ship via USPS. Canada will pay actual shipping costs plus duty fees via USPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. PAYMENT: We accept VISA. MasterCard and E-C
$
26.99
Buy It Now
Free Shipping
Condition: New
Location: China
10 x New Mitsubishi CNMG120404-MA UE6020 CNMG431MA CNC Turning Carbide Inserts.
$
5.00
Buy It Now
$5.25 Shipping
Condition: New – Open box
Location: Wichita, United States
#40 Threaded Drill Bushings! the one you receive will be equal to & or similar condition as the photo. Excellent Working Condition!
$
15.00
Buy It Now
$8.50 Shipping
Condition: Used
Location: Pleasant Mount, United States
REGO-FIX PG25 powRgrip Collet.
$
11.99
Buy It Now
$4.00 Shipping
Condition: New
Location: Huntington Beach, United States
MAS-I 45-degree retention knob / pull stud, 1.266" gage length. Manufactured to the highest standards for maximum safety and long life. All mating surfaces ... moreprecision ground. Our part # TEC-21003-45. Hardened for maximum longevity.
$
30.00
Buy It Now
Free Shipping
Condition: New
Location: Maumee, United States
950 total inserts available in (10pks).
$
33.55
Buy It Now
Free Shipping
Condition: New
Location: Saint Charles, United States
Accepts these 35 degree diamond insert: VNMG, VNMP, VNMZ. For Contouring and Profiling. Negative rake. Locating lug on the back of the clamp matches with ... morethe slot on the tool body to guide the clamp to be seated repetitively which would improve clamping accuracy.
$
59.95
Buy It Now
Free Shipping
Condition: New
Location: Lansing, United States
Grade: 4325. MPN: VNMG 16 04 08-PM/VNMG 332-PM 4325.
$
28.95
Buy It Now
Free Shipping
Condition: New
Location: Saint Charles, United States
Model# MTJN R-08-2A. Negative rake. Finger clamp #: CL-6. This unique skeleton design on the cutting edge improves toughness and anti-plastic deformation. ... more3 degree cutting edge angle. YBC252 comprises of thick layer of TICN and Al2O3 in CVD coating process which yields anti-plastic deformation and strong cutting edge strength.
$
49.00
Buy It Now
Free Shipping
Condition: New
Location: Richmond, United States
Made from hardened tool steel, we have a few of these around the shop that we have been using for over 10 years with no visible wear.
$
71.50
Buy It Now
$3.00 Shipping
Condition: New
Location: Saint Louis, United States
We are happy to help.
$
199.95
Buy It Now
$10.95 Shipping
Condition: New
Location: Tullahoma, United States
Insert Type: R390-11 .
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
 In 

Former Listings  
 
S-J 05353 1/4-14 or M6-M6.3 Tap Holder #3 B&S Taper
Scully-Jones 05353 1/4-14 M6-M6.3 Split Sleeve Tap Holder#3 B&S Taper. 3 Brown& Sharpie Taper Holder for 1/4" 14 or M6- M6.3 size taps Overall length 2" Overall diameter 0.378" New. Unused holders. I have more stuff for auction and in, check it out I will combine shipping. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for looking!
Mytec ZA10594 Hydraulic Expansion 30mm Arbor
myTEC ZA10594 Hydraulic Expansion 30mm Arbor. 30mm shank with bevel 25mm long 30mm diameter arbor 61mm long, 20mm front shaft Overall length 112mm Used. Defect free and complete attachment but a bit difficult for me to test if, how and why it would function. I have more stuff for auction and in, check it out I will combine shipping. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for looking and happy bidding!
S-J 18526 #1 Morse Taper on 7/8-12 Automotive Shank
Scully-Jones 18526#1 Morse Taper on 7/8-12 Automotive Shank. 7/8" 12 size key 3/16 Siebert 952625 7/8" nut#1 Morse Taper Overall length 4.21" Used. Functional and complete holder. I have more stuff for auction and in, check it out I will combine shipping. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for looking and happy bidding! 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13fbf5377a9-0xf7-
USED BILZ / NT TOOL TAP HOLDER S/WL 16.20-10/TR10X1.5 M6 JIS
LISTING IS FOR A USED BILZ/ NT TOOL TAP HOLDER BRAND- BILZ/ NT TOOL PART# S/WL 16.20-10/ TR10X1.5 M6 MADE IN JAPAN FOR USE WITH M6 JIS TAPS(M6 JAPANESE INDUSTRIAL STANDARD TAPS) AUTO SHANK SIZE- M10 X 1.5 OAL- 6.25" COMES WITH LOCK NUT CONDITION- GOOD USED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT ... moreMUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANG
TSD UNIVERSAL ENGINEERING 551108 1-1/2" XZ COLLET DOUBLE TAPER LOCK NUT USED
YOU ARE BIDDING ON A USED TSD UNIVERSAL ENGINEERING 551108 1-1/2" XZ COLLET DOUBLE TAPER LOCK NUT. THE LOCK NUT IS IN GOOD USABLE CONDITION AND WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
Mapal MN 5090-10-K HSK-100A Module Adapter
Mapal MN 5090-10-K HSK-100A Module Adapter flange: 60mm diameter. 55mm thick 30mm diameter cavity. 12mm deep with four holding screws- not included 4 mounting threaded holes M5X0.75 arranged in a square 31mm O.C. channel through(seal not included) HSK-100A taper 76mm/71.5mm diameters 50mm long 100mm flange diameter 105mm overall length New old stock. With no wear whatsoever. No mounting screws and no seals. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Mapal MN5140-20-K ER32 Collet Chuck HSK-A 100 Taper
Mapal MN5140-20-K ER32 Collet Holder HSK-A 100 Taper ER32 collet holder Rego-Fix Swiss Hi-Q/ERC32 Nut 100mm long from the bottom of the collar HSK100-A taper mount Overall length 148mm Used but in great. Clean and fully functional shape. Some are marked MN5140-20-K with MN5140-10-K crossed over by manufacturer. Check out my collets for this chuck and take advantage of combined shipping. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Komet 52801 16316 16mm Hydraulic Expansion End Mill Holder HSK-C 63 Taper
Komet 52801 16316 16mm Hydraulic Expansion End Mill Holder HSK-C 63 Taper" 16mm hydraulic expansion holder, 82mm long from the bottom of the collar HSK63-C taper mount Overall length 114mm Used but in good. Clean functional shape. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Mapal MN5140-10-K ER32 Collet Holder HSK-A 100 Taper
Mapal MN5140-10-K ER32 Collet Holder HSK-A 100 Taper ER32 collet holder Rego-Fix Swiss Hi-Q/ERC32 Nut 100mm long from the bottom of the collar HSK100-A taper mount Overall length 148mm Used but in great. Clean and fully functional shape. Check out my collets for this chuck and take advantage of combined shipping. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Mapal MN5165-10-K 16mm Hydraulic Expansion End Mill Holder HSK-A 100 Taper
Mapal MN5165-10-K 16mm Hydraulic Expansion End Mill Holder HSK-A 100 Taper" 20mm hydraulic expansion holder, 100mm long from the bottom of the collar HSK100-A taper mount Overall length 148mm Used but in great. Clean and fully functional shape. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Kelch 702.0008.343 20mm Hydraulic Expansion End Mill Holder HSK-C 63 Taper
Kelch 702.0008.343 20mm Hydraulic Expansion End Mill Holder HSK-C 63 Taper" 20mm hydraulic expansion holder, 80mm long from the bottom of the collar HSK63-C taper mount Overall length 112mm Used but in good functional shape. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
SOPKO GRINDING ARBOR ADAPTER 1 1/4" DIAM X 4" LONG
SOPKO GRINDING ARBOR ADAPTER 1 1/4" DIAM X 4" LONG EXTERNAL LARGE THREAD 7/8-14 X 3/4" LONG 1 PC ID THREAD FOR GRINDING WHEEL- 5/8- 18 SOLD AS IS. WHERE IS STOCK# 2193A THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
8020.00700.03 1/2" End Mill Holder HSK-C 50 Taper
8020.00700.03 1/2" End Mill Holder HSK-C 50 Taper" 1/2" one screw holder. 50mm deep 75mm long from the bottom of the collar HSK50-C taper mount Overall length 100mm Used and in clean. Defect free condition. Those stains are just that- surface discoloration from oil or something. No manufacturer mark or name. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting! f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13fc26c7605-0x101-
Guhring 60118075 1/2" End Mill Holder HSK-C 50 Taper
Guhring 60118075 1/2" End Mill Holder HSK-C 50 Taper" 1/2" one screw holder, 2" long from the bottom of the collar HSK50-C taper mount Overall length 3" Used and in clean condition. Some scratches on the front as it was probably run into material few times. Nothing too deep or obnoxious though. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Kelch 420.K034.342 20mm End Mill Holder HSK-C 50 Taper
Kelch 420.K034.342 20mm End Mill Holder HSK-C 50 Taper" 20mm one screw holder, 60mm long from the bottom of the collar HSK50-C taper mount Overall length 85mm Used and in clean. Defect free condition. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Morse Taper Adapter set Drill Sleeve MT4 MT3 MT2 2MT 3MT 4MT
MT4 TO MT3 AND MT 3 TO MT2 ADAPTERS 012-08-04-22/550 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY ... morePACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* All items are
BILZ wflp 140-0 1.1/16 COMPRESSION TAP DRIVER CHUCK
BILZ wflp 140-0 1.1/16 COMPRESSION TAP DRIVER CHUCK
MORSE TAPER ADAPTER MT4 TO MT5 MALE FEMALE FOR RADIAL DRILL
PARTIAL SLIT IN SIDE DOES NOT AFFECT OPERATION 012-08-04-22/150 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM ... moreBACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM. ASK FOR BETTER PICS IF YOU CARE* Al
flanged tool holder adapter set 1/2 3/4 1-1/4 1-1/2 to 2" straight shank turret
THE 3 SMALL SIZES ARE GOOD. THE LARGER ONES ARE BEAT UP OR SPLIT, USE FOR EMERGENCY. 012-08-04-22/158 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU ... moreWILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, PAINT, ENGRAVING OR GREASE ON THEM.
ENERPAC A-310 10 TON CAPACITY ARBOR PRESS C FRAME & R1010 CYLINDER DOUBLE ACTING
USED. EXCELLENT CONDITION ENERPAC C FRAME PRESS FRAME WITH DOUBLE ACTING CYLINDER. BUYER PAYS UPS SHIPPING FROM 30527. INQUIRE IF YOU WOULD LIKE AN ELECTRIC POWER PACK AVAILABLE SEPARATELY 012-10-03-188/4561 PLEASE READ BEFORE BIDDING: EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING ... moreFEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME ITEMS MAY HAVE DUST. DIRT, P
1-1/4" Face Mill Arbor KM63 Taper
1-1/4" Face Mill Arbor KM63 Taper. 1.25" diameter arbor. 693" long 5/8-18 screw thread, 3.154" diameter with 1/2" wide keys, KM63 taper mount Overall length 3.846" Used but in clean and defect free condition. No manufacturer marks. No screw. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
USED MAZAK Integrex Style 50mm VDI Facing Toolholder
This is a USED Mazak Integrex St yle 50mm VDI Facing Toolholder. There are no manufactu ring n ames marked on this tool. But it is marked 3 2 01. The tool capacity is 1.110" wide and 4-1/ 2" high and the tool is 6-1/2" overall length. New price of a comparable holder is over $850. So it should be a great buy for someone! Check out my and by adding my eBay Store to your Favorites! Visit our website. Available at our Ebay Store Site, for a complete listing of all our products and vendors. It is fully interactive and will show you current pricing and stock availability on thousands of items! Register today to place orders, print statements, expedite orders and more! Also listed will be our toll free telephone and fax numbers for your convenience. Get your copy of our 450 page T&S Catalog, with listings of popular items from ... moreall the companies we represent. Direct Links to all our vendors which include some of the top names in the industry; Kennedy, OSG, Titex, Clausing, Jet, Precision Twist, Wilton, Norton, Starrett, Allied, Mitutoyo, Keo, Brown& Sharpe and Jacobs, just to name a few! WE SPECIALIZE IN CUTTING TOOLS! Hundreds of decimal reamers, including over and under size metric reamers. Hundreds of special taps from#000 to 4" endmills, toolholders, abrasives, fasteners, machinery and much more. Experienced sales staff.large inventory.competitive pricing.give us a call! THANKS FOR SHOPPING.T&S!
USED PARLEC EXTENSION ADAPTER KA5 x KA5-E2 (60.00mm Extension)
LISTING IS FOR A USED PARLEC EXTENSION ADAPTER BRAND- PARLEC STYLE- KA5 x KA5-E2 EXTEN SION ADAPTER- 60.00mm COUPLER- KA5 CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. ... moreCOMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS ARE UNPAID WITHIN THE 7 BUSINESS DAY TIME PERIO
PRECISION R8 SHANK 5/8" STUB MILLING ARBOR + CUTTERS
aims PRECISION R8 SHANK 5/8" STUB MILLING ARBOR + CUTTERS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a R8 Shank Stub Milling Arbor in Good condition. Specifications: Unit has a 5/8" arbor. Unit has a R8 shank. Overall length: 5" Cutter Diameters: 4" Cutter Thickness: 032" to.091" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PRECISION R8 SHANK 5/8" STUB MILLING ARBOR + CUTTERS Reliable Tool Inc. c 2011 | Powered by a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13fc2b79aaa-0xe9-
ZIEGLER Floating Tapping Head Tool Holder Collet Mill Chuck 1/2" BOLT THREAD tap
Very Nice used Floating head. I have added a photo of a collet so you can see what type of collet this holder uses. It is not an actual photo of the collet but it is very similar, this collet is just a touch longer than the one in the photo, this holder has ONE collet with it. We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping ... moreamount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
Scully-Jones Morse No.4 To Morse No.3 Taper Sleeve Adapter
Scully-Jones Morse No.4 To Morse No.3 Taper Sleeve Adapter" 5 Morse Taper Female#3 Morse Overall length 5.25" Diameter 1.268" Used but not much wear. Few dings and scratches but good functional shape. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Brand Name Morse No.4 To Morse No.3 Taper Sleeve Adapter
Morse No.4 To Morse No.3 Taper Sleeve Adapter" 5 Morse Taper Female#3 Morse Overall length 5.5"5.3. Diameter 1.275" Used brand name adapters. Two are Cleveland. One Union and one Morse. Roughly the same degree of wear, few dings and scratches but good functional shape. This listing is for one of the adapters but if you are partial to specific one if I could oblige I would. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Hydra-Lock AC-44148 15mm Holder Flange Adapter
Hydra-Lock AC-44148 15mm Holder Flange Adapter flange: 3" diameter. 0.625" thick with Ø1.5" x 1.89" protrusion on the back side with an o-ring 4 mounting screw holes 0.345" arranged in a square 1.60" O.C. Nose: 1.56" outside diameter 15mm inside 3/16" Allen wrench to actuate operating length 1.129" 2.668" overall length Used but no wear and no abuse on any kind. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Hydra-Lock AC-44138 1" Holder Flange Adapter
Hydra-Lock AC-44138 1" Holder Flange Adapter flange: 3.5" diameter. 1.38" thick with Ø1.61" x 0.4" inset in the back side 4 mounting screw holes 0.342" arranged in a square 1.950" O.C. Nose: 1.661" outside diameter 1" inside 3/16" Allen wrench to actuate 2.668" overall length Used but no wear and no abuse on any kind. One has factory modified model numbers. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
A.C.T.S Canada FX181770 SP2743-3 1" Facemill Arbor Flange Adapter
A.C.T.S Canada FX181770 SP2743-3 1" Facemill Arbor Flange Adapter flange: 4" diameter. 1" thick with one Ø1.5" x 0.817" protrusion coolant through channel 4 mounting screw holes 0.426" arranged in a square 2.3" O.C. 5/8" key slot 3/8" deep Arbor: 1" outside diameter 0.943" long M12x1 bolt thread keys 3/8" 2.75" overall thickness No sign of any usage. No arbor bolt. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting! 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13fc33ae101-0xfe-
A.C.T.S Canada FX181702 #A-3656 EPB Graflex #5 Holder Flange
A.C.T.S Canada FX181702#A-3656 EPB Graflex#5 Holder Flange flange: 3.25" diameter. 1" thick with one Ø1.5" x 0.89" protrusion coolant through channel 4 mounting screw holes 0.354" arranged in a square 1.855" O.C. EPB Graflex 5 Socket: 50mm outside diameter 28mm inside 30mm deep two holding screw and 13mm wide notch 104mm overall length Used but no wear and no abuse on any kind. There is no seal on the bottom of the socket. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
A.C.T.S Canada FX181700 #A-3654 EPB Graflex #5 Holder Flange
A.C.T.S Canada FX181700#A-3654 EPB Graflex#5 Holder Flange flange: 3.25" diameter. 1" thick with one Ø1.5" x 0.89" protrusion coolant through channel 4 mounting screw holes 0.354" arranged in a square 1.855" O.C. EPB Graflex 5 Socket: 50mm outside diameter 28mm inside 30mm deep two holding screw and 13mm wide notch 2.22" overall thickness Used but no wear and no abuse on any kind. There is no seal no the bottom of the socket. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
A.C.T.S Canada FX181758 #A-3660 EPB Graflex #5 Holder Flange
A.C.T.S Canada FX181758#A-3660 EPB Graflex#5 Holder Flange flange: 3.25" diameter. 1" thick with one Ø1.5" x 0.89" protrusion coolant through channel 4 mounting screw holes 0.354" arranged in a square 1.855" O.C. EPB Graflex 5 Socket: 50mm outside diameter 28mm inside 30mm deep two holding screw and 13mm wide notch 1.89" overall thickness Used but no wear and no abuse on any kind. There is no seal on the bottom of the socket. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
A.C.T.S Canada FX181782 #A-3757 EPB Graflex #5 Holder Flange
A.C.T.S Canada FX181782#A-3757 EPB Graflex#5 Holder Flange flange: 92mm diameter. 22.5mm thick with one Ø30mm x 23mm protrusion coolant through channel 4 mounting screw holes 7mm arranged in a square 41mm O.C. EPB Graflex 5 Socket: 50mm outside diameter 28mm inside 32mm deep two holding screw and 13mm wide notch 59mm overall thickness Used but no wear and no abuse on any kind. There is no seal on the bottom of the socket. One is black of the later style. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
MEAD-USA CP-400P BENCH PRESS 3/4 TON CLICKER PRESS PNEUMATIC AIR PRESS USED
Sale is for One(1) USED MEAD-USA CP-400P TOGGLE PRESS 3/4 TON CLICKER PRESS PNEUMATIC AIR PRESS Item has light scratches other than that no damage Mead Product pdf- It has been tested and works as it should The press in the photos is the one you recieve Everything this comes with is shown in the photos Spec's from mead; Model No. Description Parts: Bore Thrust Stroke Table Width& Depth Weight CP-400P 3/4 Ton Column Press Cylinder Mounted on Stand 4" 1508 4 6 7/8 x 8 3/4 105 lbs Location- P-1-5 We Combine Shipping Thanks Kurt
Waukesha Floating Tapping Head threading tap Tool Holder Morse Taper 2 shank 2mt
Nice used Floating head. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like a ... moreshipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
USED COLLIS AUTO-SHANK #3 MORSE TAPER ADAPTER #3MT 68743
LISTING IS FOR ONE(AUTOMOTIVE) AUTO-SHANK MORSE TAPER ADAPTER BRAND COLLIS ADAPTER BODY# 68743 LOCK NUT# 66607 OUTSIDE DIAMETER 1-3/8' MORSE TAPER HOLE SIZE- 3MT OVERALL LENGTH- 4.62" LENGTH OF THREAD 1-7/8" LENGTH OF FLAT 2-5/8" NATIONAL ACME THREAD SIZE 1-3/8" 12 WOODRUFF KEY SIZE 1/4" X 1" CONDITION- VERY GOOD USED Normal 0 Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND ... moreEXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAK
Bilz PN 70-IK/S6 HSK-C40-40C Reamer Floating Adapter
Bilz PN 70-IK/S6 HSK-C40-40C Reamer Floating Adapter extension 102mm coupling HSK-C 40 female and male Mapal 40-06 clamp installed overall diameter 70mm Probably used but in excellent condition and clamp actually looks new. Complete with clamp seal. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Bilz PN 70-IK/S6 HSK-50C -50C Reamer Floating Adapter
Bilz PN 70-IK/S6 HSK-50C-50C Reamer Floating Adapter extension 110mm coupling HSK-C 50 female and male Mapal 50-07 clamp installed overall diameter 70mm Probably used but in excellent condition and clamp actually looks new. Complete with clamp seal. Some arcane number on the body. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Morse No.5 To 7/8" Weldon Mill Shank Adapter
Morse No.5 To 7/8" Weldon Mill Shank Adapter" 5 Morse Taper Female 7/8" Weldon straight shank with 2 screws Overall length 8.5" Diameter 1.875" Used in good condition and functional tool. No manufacturer mark. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Scully-Jones Morse No.5 To Morse No.4 Taper 9" Extension Adapter
Scully-Jones Morse No.5 To Morse No.4 Taper 9" Extension Adapter" 5 Morse Taper Female#4 Morse Extends 9" Overall length 15" Diameter 1.852" Used. Functional tool. Some rings from being run into material at the tip on otherwise defect free unit. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
myTec XB0069 16mm Hydraulic Clamp TAMG34694
myTec XB0069 16mm Hydraulic Clamp TAMG34694. 16mm diameter. 42mm long Overall length 91mm Overall diameter 28mm, Used piece but clean and wear free. Some fluid residue still inside. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting! 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13fc426cc93-0xf4-
myTec ZB10805 AG0662 28.035-28.080 Clamp
myTec ZB10805 AG0662 28.035-28.080 Clamp. 28.035mm- 28.080mm, Overall length 140mm Overall diameter 41mm, socket 1" diameter. 15mm long Probably used but there is actually no evidence of any but for a slight mark on the shank flat. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting! ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13fc426ce25-0xf2-
Walter B 2074-400802 1.095"/1.150" Indexable One Step Boring Bit NCT 40
Walter B 2074-400802 1.095"1.150" Indexable Boring Bit NCT 40 NCT 40 short taper Big diameter 25.2mm Taper length 12mm four square 0.368" cartridges top diameter 1.095" bottom diameter 1.150" distance between 1.635" overall boring depth 2.737" Overall length 3.469 w/o taper Overall diameter 40mm w/o cartridges New old stock. No inserts in cartridges. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
5/16 x 11/32 x 6-3/4 x MT2 DUAL BAYONET LOCK SPOT FACER PILOT ARBOR TOOL HOLDER
5/16 x 11/32 x 6-3/4 x MT2 DUAL BAYONET LOCK SPOT FACER PILOT ARBOR TOOL HOLDER SPOT FACER HOLDER 5/16" DUAL BAYONET LOCK DRIVE 11/32" PILOT DIAMETER MT2- 2 Morse Taper Shank 6-3/4" OVERALL LENGTH This listing is for 1 tool holder. Which appears to be unused, in good general overall condition with some minor cosmetic surface wear like small scratches. For use holding spot facers or countersink cutters. Made by Relco. Don't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within ... morethe specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exceed 4lbs for Small Flat Rate Boxes. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship to unconfirmed or unregistered shipping addresses, we also will not ship to third partie
2 5/16" x 8" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER
2 5/16" x 8" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER BACK SPOT FACER HOLDERS 5/16" SINGLE BAYONET LOCK DRIVE 5/16" PILOT/SHANK DIAMETER ABOUT 8" OVERALL LENGTH(Lot Quantity = 2) This listing is for 2 tool holders in good general overall condition with some minor surface wear from use like scratches and oxidation as seen. Some of these are in protective wax casing and appear unused. Though we are selling them as such due to uncertainty. This is an assortment of tool holders made by different manufacturers. Some of the drive heads have slightly different lenghts up to the locking slot and the actual diameters vary slightly from.308" to.313" For use holding back/ inverted spot facers or countersinks with approx 5/16" single bayonet lock drive. Each tool holder is about 8" overall ... morelength. Don't miss your chance to own this item now! Please note that there were multiples of this item at the time of listing. Each in like condition and represented in the pictures. They will be shipped at random unless the buyer requests otherwise. See pictures for more details and information of condition and please make sure that this is what you need before purchasing, as it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping wit
Walter B3220G.N2 020-027.Z2 20-27 .79"-1.06" Boring Head w. Cartridges NCT 25
Walter B3220G.N3 033-044.Z2 33-41.5mm 1.30"1.63" Boring Head with Cartridges NCT 25 Mount" NCT 25 short taper Big diameter 15.6mm Taper length 6.88mm two EB221.WC03 cartridges Overall length 80mm w/o taper Overall diameter 32mm w/o cartridges Used in good functional shape. No inserts in cartridges. No abuse, excessive wear nor breakage. Coolant channel clear. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for looking and happy bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13fc426ce2a-0xf0-
Smith OSA 3030 Quick Change Adapter
08 6B This item is surplus stock in good condition. Listed as used due to surface rust from storage. But possibly unused. ID 2-5/8" OD 2-7/8" OD outer ring 3-3/16" OAL 3-1/4" Please email any questions or requests for additional pictures before purchasing. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government ... moreregulations prohibit such behavior.
DAKE NO. 00 901004 RATCHET ARBOR PRESS 1 TON HAND PRESS BENCH PRESS
Sale is for One(1) USED DAKE NO. 00 ARBOR PRESS 1 TON HAND PRESS BENCH PRESS Item has very light scratches and a chipped tooth shown in photos This press only comes with what is shown in the photos The one shown in the photos is the one you receive Specs from Dake; model 0 number 902004 capacity(tons) 1 leverage ratio 25:1 ram size(inches) 1"X1"X7-1/2" maximum diameter work 7 A throat 3-1/2" E base length 4-1/4" F base width 9" G height(inches) 9-3/8" weight(lbs) Customer pick-ups welcome at; KAE Industrial 3145 Akron Road Wooster.Ohio 44691 Location- A-5-2 We combine shipping Thanks Kurt di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13fc53a0564-0xfe-
LYNDEX TG100 COLLET CHUCK W/ CAT40 SHANK & 3 COLLETS -1/2", 39/64" & 13/16"
aims LYNDEX TG100 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS-1/2" 39/64" 13/16" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in Japan by Lyndex. This is a Collet Chuck with 3 Collets in good condition. Specifications: Collet Type: TG100. Shank: CAT40. Collet Sizes: 1/2" 39/64" 13/16" Projection: 2-1/2" Overall Length: 6-3/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. LYNDEX TG100 COLLET CHUCK W/ CAT40 SHANK& 3 COLLETS-1/2" 39/64" 13/16" Reliable Tool Inc. ... morec 2011 | Powered by
3 R8 TO JACOBS TAPER CHUCK ARBORS - R8 TO JT3, JT6, & JT2
aims 3 R8 TO JACOBS TAPER CHUCK ARBORS- R8 TO JT3. JT6, JT2 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 3 R8 to Jacobs Taper Chuck Arbors in good condition. Specifications: Sizes: Jacobs Taper# 2. 3, 6. Shanks: R8. Overall Lengths: 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 3 R8 TO JACOBS TAPER CHUCK ARBORS- R8 TO JT3. JT6, JT2 Reliable Tool Inc. c 2011 | Powered by
1.0625" OD to #2 Morse Taper ID Adaptor x 6.625" OAL w/ Depth Adjustment
1.0625" OD to#2 Morse Taper ID Adaptor x 6.625" OAL w/ Depth Adjustment 1.0625"12-627 USA Auction is for 1 Adaptor all are in Good Condition I do combine shipping where possible RLS1-D3.
Collis #2 Morse Taper OD 25/64" Drill Collet
Collis#2 Morse Taper OD 25/64" Drill Collet Auction is for 1 Collet all are in Good Condition I do combine shipping where possible RLS1-D3.
.875" OD to #2 Morse Taper ID Adaptor x 3.625" OAL w/ Depth Adjustment
875" OD to#2 Morse Taper ID Adaptor x 3.625" OAL w/ Depth Adjustment 7/8"12-625 USA Auction is for 1 Adaptor all are in Good Condition I do combine shipping where possible RLS1-D3. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13fcbc1adf3-0x107-
JANESVILLE A-4243-A JT&M PNEUMATIC TOWER PRESS MULTI-STAGE AIR PRESS
Sale is for One(1) USED JANESVILLE JT&M A-4243-A MULTI-STAGE PNEUMATIC PRESS This press has light scratches shown in photos It has been tested and works as it should The press in the photos is the one you receive Everything this comes with is shown in the photos Spec's; Manufacturer- Janesville JT&M Model- A-4243-A Height- 31-3/8" Width- 16" Depth- 6-3/4" Max opening Height- 8-3/8" Capacity- 1944 LB Stroke- 2-5/8" Weight- 129 LB Location- P-1-5 Thanks Kurt
PNEUMATIC TOWER PRESS MULTI-STAGE AIR PRESS 4 STAGE PANCAKE W/ PEDAL
Sale is for One(1) USED MULTI-STAGE PNEUMATIC PRESS This press has light scratches shown in photos It has been tested and works as it should The press in the photos is the one you receive Everything this comes with is shown in the photos Spec's; Height- 22-3/4" Width- 15" Depth- 15" Max opening Height- 6-7/8" Bore- 6" Stroke- 1" Weight- 125.6 LB Rod Dia. 2" Thanks Kurt
SOPKO GRINDING ARBOR ADAPTER 2" DIAM X 5" LONG
SOPKO GRINDING ARBOR ADAPTER 2" DIAM X 5" LONG EXTERNAL LARGE THREAD 7/8-14 X 3/4" LONG ID THREAD FOR GRINDING WHEEL- 5/8- 18 SOLD AS IS. WHERE IS STOCK# 2197A THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
SOPKO GRINDING ARBOR ADAPTER 1 3/4" DIAM X 4" LONG
SOPKO GRINDING ARBOR ADAPTER 1 3/4" DIAM X 4" LONG EXTERNAL LARGE THREAD 7/8-14 X 3/4" LONG ID THREAD FOR GRINDING WHEEL- 5/8- 18 SOLD AS IS. WHERE IS STOCK# 2196 THERE IS A $15.00 HANDLING FEE INCLUDED IN ALL INTERNATIONAL SALES
SOPKO GRINDING ARBOR ADAPTER 1 1/16" DIAM X 3" LONG
SOPKO GRINDING ARBOR ADAPTER 1 1/16" DIAM X 3" LONG EXTERNAL LARGE THREAD 7/8-14 X 3/4" LONG 1 PC ID THREAD FOR GRINDING WHEEL- 5/8- 18 SOLD AS IS. WHERE IS STOCK# 2195 THERE IS A $15.00 HANDELING FEE INCLUDED IN ALL INTERNATIONAL SALES dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13fcbc1adb2-0xf3-
HDT Hydraulic Contraction Arbor
HDT Hydraulic Contraction Arbor 9001035 753783-1-T-503/2 Made in Germany Loc. V33D8(Inv.25797) Email Not What You Were Looking For? Check out our! where we keep a wide selection of Machine Tools. Tooling Components. Parts. Accessories. And More in stock for your convenience. Please Note! When bidding on this item the following will be added to the amount you bid: Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 06480. To Our International Bidders: The only method of payment we accept for international sales is an international money order. All international sales are subject to a $15 ... moresurcharge in addition to normal shipping and handling costs. All items are sold"AS- IS. Where- IS" and with all faults. Items are described to the best of our knowledge, however, We(Mikekandu and/or the Seller) make no guarantees regarding accuracy, errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value or condition of any item. We expressly disclaim any warranty of merchantability or fitness for a particular purpose of any item. I am a Trading Assistant- I can sell items for you! Questions? For more information read our page. Terms All sales are final. Buyer is responsible for actual shipping. Payment must be made within 10 days. For full terms and conditions of sale. Shipping If you need help getting shipping quotes. View My Other Auctions Created by eBay Blackthorne ver. 3.2.151.0
TOOL ARBOR SHAFT SHANK TAPER ADAPTER 1-17/32" to 1-7/8"
TOOL ARBOR SHAFT SHANK TAPER ADAPTER 1-17/32" to 1-7/8" TOOL ARBOR TAPER SHANK ADAPTER 1-17/32" LARGE I.D. 1-7/8" LARGE O.D. 465" INNER TANG OPENING 1.505" SMALL O.D. 3/4" THREADED END 9-1/32" LENGTH This listing is for 1 lightly used tool shank adapter in good overall condition. There are signs of use and some minor cosmetic wear. The type of taper is unknown as the dimensions do not seem to fit Morse. Brown& Sharpe, R8, Jacobs, Jarno or NMTB tapers. Measures approximately 1-17/32" large inner diameter opening, 1-7/8" large outer diameter, 465" inner tang opening(about 11.8mm; slightly too small for MT4 Morse taper) 1.505" small outer diameter and 9-1/32" overall length. The small end features an approximately 3/4" female threaded opening. The only marking is"619" ... moreSee the diagrams below for detailed dimensions. Don't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes, though we usually mention the maximum quantity in this paragraph. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 1
TM-SMITH #2 BILZ TAP ADAPTER COLLET (DIRECT-DRIVE) 5/16" HAND TAP (52-005)
LISTING IS FOR A TM-SMITH TAP COLLET BRAND- TM-SMITH PART# 52-005 COLLET SIZE- 2 BILZ TAP SIZE- 5/16" HAND TAP DIRECT-DRIVE TAP ADAPTER COMPATIBLE WITH BILZ. COLLIS, UNIVERSAL, LYNDEX, AND MANY OTHER TAP HOLDERS CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES ... moreWHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHI
LAST ONES! 2 HEAVILY USED SCULLY JONES #1MT AUTO-SHANK MORSE TAPER ADAPTERS
LISTING IS FOR 2 HEAVILY USED SCULLY JONES AUTO SHANK MORSE TAPER ADAPTERS BRAND- SCULLY JONES INSIDE TAPER- 1MT SHANK SIZE- 3/4"12 MIN. PROJECTION- 50" OAL- 3.00" BOTH COME WITH ADJUSTING NUTS CONDITION- HEAVILY USED Normal 0 PLEASE CAREFULLY REVIEW OUR POLICIES BELOW. SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS ... moreOF AUCTION END. WE ACCEPT PAYPAL. AS WELL AS, VISA, MASTERCARD, AMERICAN EXPRESS AND DISCOVER CREDIT CARD PAYMENTS. PLEASE CALL 800.535.8331 TO MAKE A CREDIT CARD PAYMENT BY PHONE. ALL IOWA CUSTOMERS ARE SUBJECT TO IOWA STATE SALES TAX OF 7% FEEDBACK POLICY: WE STRIVE TO DO OUR BEST AND TO HELP OUR CUSTOMERS IN ANY WAY. OUR GOAL IS TO EARN 5-STAR RATING IN ALL CATEGORIES. IF WE DO MAKE A MISTAKE. PLEASE LET US KNOW AND WE WILL DO WHATEVER WE CAN TO FIX IT. PLEASE DO NOT LEAVE NEGATIVE OR NEUTRAL FEEDBACK UNTIL YOU GIVE US A CHANCE TO MAKE IT RIGHT. EXTRA AND LEGAL INFORMATION: ATI HAS BEEN IN BUSINESS SINCE 1986 OFFERING USED. NEW AND NEW SURPLUS TOOLING FROM BRANDS SUCH AS KENNAMETAL. SANDVIK, VALENITE, AND ISCAR TO NAME A FEW. WE PRIDE OURSELVES ON OUR QUICK SHIPPING AND POSITIVE FEEDBACK. PURCHASER/ BUYER ASSUMES ALL RISK OF LIABILITY WITH RESPECT TO THE EBAY PURCHASE AND USE OF ITEM. AND AGREES TO NOT OLD ATI AND ITS EMPLOYEES RESPONSIBLE FROM ANY INJURY RESULTING IN POSSESSING OR OPERATION OF ITEM PURCHASED. tooled_ati RESERVES THE RIGHT TO END ANY LISTING AT ANYTIME. tooled_ati RESERVES THE RIGHT TO UPDATE OR CHANGE THESE POLICIES WITHOUT NOTICE. IF YOU HAVE ANY
ARBOR BROWN & SHARP NO 9 K-39 1/2 INCH
ARBOR BROWN& SHARP NO 9 K-39 1/2 INCH You are bidding on a tool that is“used” but in excellent condition with no nicks or blemishes. The draw thread is 1/2– 13. Length over all 5.82“ taper length 4.08” head length 1.35” head dia 1.28” taper dia 1.06” to 0.90” Other items that I have listed can be combined to reduce postage. antique vintage tooling machinist machine shop lathe drill press mill tooling Powered by The free listing tool. List your items fast and easy and manage your active items.
ASSORTMENT OF MORSE TAPER ADAPTERS W/ STRAIGHT SHANKS
aims ASSORTMENT OF MORSE TAPER ADAPTERS W/ STRAIGHT SHANKS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST This is a lot of Morse Taper Adapters in Good condition. Specifications: Some Sizes: 2 MT x 1-1/4" 4 MT x 1-1/2" 3 MT x 1-1/2" 1 MT x 1" OAL Range: 3-3/8" to 8-1/2" Approx) Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ASSORTMENT OF MORSE TAPER ADAPTERS W/ STRAIGHT SHANKS Reliable Tool Inc. c 2011 | Powered by
6 JACOBS TAPER DRILL CHUCK ARBORS W/ MORSE TAPER SHANKS
aims 6 JACOBS TAPER DRILL CHUCK ARBORS W/ MORSE TAPER SHANKS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 6 Drill Chuck Arbor Adapters in GREAT condition. Specifications: Sizes: 3 MT x#3 JT. 3 MT x#4 JT. 3 MT x#5 JT. 4 MT x#3 JT. 4 MT x#4 JT. OAL Range: 6" Approx) Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 6 JACOBS TAPER DRILL CHUCK ARBORS W/ MORSE TAPER SHANKS Reliable Tool Inc. c 2011 | Powered by
JACOBS TAPER DRILL CHUCK ARBOR W/ R8 SHANKS
aims JACOBS TAPER DRILL CHUCK ARBOR W/ R8 SHANKS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Yuasa and other mnfs. These are 3 Drill Chuck Arbor Adapters in GREAT condition. Specifications: Chuck Arbor: Jacobs Taper 3. 6, 33. Shank: R8 Shank. Overall Length: 5" to 6" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. JACOBS TAPER DRILL CHUCK ARBOR W/ R8 SHANKS Reliable Tool Inc. c 2011 | Powered by
CUSHMAN Drill Chuck & Arbor 3-16mm 1/8 - 5/8
OUR STORE ASK A QUESTION RETURN POLICY BOOKMARK US CHECK OUR FEEDBACK CUSHMAN Drill Chuck& Arbor 3-16mm 1/8- 5/8 This CUSHMAN drill and arbor is in great condition! It has minor scratches from normal use and wear. Measurements: 3-16 mm 1/8- 5/8 Please pay within two days and we will ship within two days. Thanks for buying. Regards, Get a Grip& More RETURN POLICY: We offer an exchange or refund for any items we sell unless the listing specifically states"as is. All items must be returned in original condition. Refund amount will be calculated less actual shipping cost. This includes items shipped for free. If you have any questions feel free to call us. Thank you for your business! Regards, Get a Grip& More 908-223-1325.
2.5" shank Turret Lathe Warner Swasey Boring Bar HEAD Tool Holder tooling
Item. Adapter/ boring bar tool holder with a 1.105" wide slot for holding 1" square TOOL bits Manufacturer. Unknown for sure but it looks like a W&S or a copy Model. TN 1249 Length. 8-1/2" Overall Size. 2-1/2" diameter round shank Condition. Nice Used We offer a Money back Guarantee if you are not happy with this item. I will refund your full ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but there will be ... morea $4 packing fee in addition to actual shipping costs. So please do not send payment until I send you a total. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a friday or on the weekend or an extended holiday weekend I may not be able to send you a total until monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! Pay me securely with any major credit card through PayPal! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
ETM - R8 Arbor SM 1.500 Diameter Shell Mill Tool Holder
ETM- R8 Arbor SM 1.500 Diameter- Very Nice! DESCRIPTION ETM R8 Arbor Part# ETM R8 SM 1.500 New retail price: $185.99 Product Condition: USED- This item is used but in excellent working condition. Specifications: R8 Arbor W/ 1.5" Diameter 7.5" Overall length- Location D:1:1 Local Pickups Local pickup is available for all items Monday thru Friday 8:30am- 4:30pm Domestic Shipments Domestic shipments are sent via UPS or USPS Priority Service. We choose the fastest most economic shipping method based on a items size. Weight, and value ratio. Items sent to Alaska& Hawaii are subject to additional charges. International Shipments We ship to all international countries. International shipments are sent USPS International Priority unless otherwise requested. Contact us for international shipping quotes. Freight Shipments Items requiring ... morefreight will be securely strapped to a pallet and loaded at no additional charge. Carriers assess an extra charge if delivery is made to residential area and/or if the service of a lift gate are required. Rigging charges may apply to items requiring special loading/shipping requirements. Your satisfaction is our highest priority! We offer a 14 day money back guarantee on all items with the exceptions of items we list as"As-Is" or"As Shown" condition. Many times we have no prior knowledge of use and/or the ability to test an items working condition. So please ask questions before bidding/buying. Contact us at 248-240-2841 or contact@ballardintl.com with any questions. Concerns, or issues you may have.
USED EXTRA-LONG #2mt to #2mt x 37"oal MORSE TAPER DRILL SLEEVE EXTENSION SOCKET
LISTING IS FOR A USED EXTRA-LONG EXTENDED MORSE TAPER DRILL SLEEVE EXTENSION SOCKET BRAND- OUTSIDE TAPER- 2MT INSIDE TAPER- 2MT OAL- 37.00" CONDITION- GOOD USED MANY NICKS& DINGS LAST ONE! Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE ... moreSAME BOX. SOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF
Sandvik Varilock A391.16-09 50 075M Balas C3 Collet Chuck 50 Mount
Sandvik Varilock A391.16-09 50 075M Balas C3 Collet Chuck 50 Mount. 50 mount diameter 63mm small 27.1mm. 15mm long key 12mm drawbar thread M16 C3 collet holder with original nut nose length 66mm nose diameter 23.75mm(nut 30.5mm) Overall length 80mm Used in excellent. Clean, functional condition. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
USED NT-TOOL AUTO-SHANK #1MT ADJUSTABLE DRILL SOCKET ADAPTER (D20-1)
LISTING IS FOR A USED NT-TOOL AUTO-SHANK ADJUSTABLE DRILL SOCKET ADAPTER BRAND- NT-TOOL PART# D20-1 SHORT DESIGN TYPE INSIDE TAPER- 1MT SHANK- 20.00mm LENGTH- 88.00mm CONDITION- GOOD USED Normal 0 PLEASE CAREFULLY REVIEW OUR NEW POLICIES BELOW! AUCTION TERMS* SHIPPING AND HANDLING: BUYERS ARE RESPONSIBLE FOR ALL SHIPPING AND HANDLING CHARGES. tooled_ati CREATES SHIPPING CHARGES BASED ON ITEM WEIGHT, AND THE USPS& UPS RATES GIVEN TO US THROUGH EBAY + OUR HANDLING CHARGES. WE DO COMBINE SHIPPING! FOR MULTIPLE ITEM PURCHASES PLEASE ASK FOR AN INVOICE BEFORE YOU PAY TO RECEIVE COMBINED SHIPPING DISCOUNT. AFTER PAYMENT. THE ITEMS ARE PACKAGED UP AND SHIPPED. WE DO NOT REFUND EXTRA SHIPPING IF ITEMS ARE PAID WITHOUT FIRST ASKING FOR A COMBINED SHIPPING INVOICE. COMBINED SHIPPING ONLY APPLIES WHEN ITEMS ARE SHIPPED TOGETHER IN THE SAME BOX. ... moreSOME ITEMS MAY BE TO BULKY OR LARGE TO COMBINE. COMBINED SHIPPING DISCOUNTS ARE APPLIED ONLY TO ITEMS PURCHASED BY END OF AUCTION EACH FRIDAY. WE WILL NOT HOLD ITEMS INTO THE NEXT WEEK FOR COMBINED SHIPPING. THERE WILL BE A $3.00 HANDLING CHARGE FOR THE FIRST ITEM( already included in highest shipping cost item) AND A $1.00 CHARGE PER ITEM FOR EACH ADDITIONAL ITEM PURCHASED THAT FITS IN THE SAME SHIPPING BOX. IF ADDITIONAL BOXES ARE NEEDED. THE PROCESS STARTS OVER WITH THE $3.00 CHARGE AND THE SUBSEQUENT $1.00 CHARGE PER ADDITIONAL ITEMS. WE DO HAVE HIGHER HANDLING FEES IF THE ITEM IS LARGE/ BULKY. OR IS AN ITEM WHICH NEEDS SPECIAL PACKAGING(CARBIDE BARS. CHUCKS, OVERSIZE ITEMS, ETC. LARGE ITEMS OVER 100# MUST BE PICKED UP OR SHIPPED WITHIN 14 DAYS AFTER ACTUAL STORE/ LISTING ENDS. AFTER 14 DAYS THERE WILL BE A $20 PER DAY STORAGE FEE INCURRED. WE DO OFFER LOCAL PICK-UP OF ITEMS AT THE ATI TOOLING FACILITY IN FAIRFIELD. IA ON MONDAY-FRIDAY FROM 10:00 AM TO 2:00 PM(CST) PLEASE CALL AHEAD AS A COURTESY. PLEASE TAKE OUR HANDLING FEES INTO CONSIDERATION BEFORE YOU BID. PAYMENT OPTIONS: PAYMENT MUST BE MADE WITHIN 7 BUSINESS DAYS OF AUCTION END. IF ITEMS A
Sandvik Varilock 391.01S/-80 80 040 Size 80 Adapter 40mm Long Extension
Sandvik Varilock 391.01S/80 80 040 Size 80 Adapter 40mm Long Extension. 80 mount diameter 80mm small 32.33mm. 18.5mm long key 16mm Socket- same as mount, extends length 40mm diameter 80mm Used tool in excellent cosmetic and functional condition. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
2 SHELL MILL ARBORS W/ BT40 SHANKS & HSS SHELL MILL - 1-1/2"
aims 2 SHELL MILL ARBORS W/ BT40 SHANKS& HSS SHELL MILL- 1-1/2" read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST These are 2 Shell Mill Arbors in good condition. Specifications: Spud/ Arbor Sizes: 1-1/2" Shanks: BT40. Projections: 2-1/2" Overall Lengths: 6-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. 2 SHELL MILL ARBORS W/ BT40 SHANKS& HSS SHELL MILL- 1-1/2" Reliable Tool Inc. c 2011 | Powered by
NMTB 40 1.40" Diameter x 12.25" Long Arbor
NMTB 40 1.40" Diameter x 12.25" Long Arbor 12.25" Is the length of the 1.4" Diameter With assorted shims and spacers Excellent Condition Questions? Call Robert at 607-259-5615 58-B
Scully-Jones Morse No.2 Taper 8-1/2" Extension Adapter
Scully-Jones Morse No.2 Taper 8-1/2" Extension Adapter" 2 Morse Taper Female#2 Morse Extends 8.5" Overall length 11.6" Diameter 1.17" Used and fundamentally functional tool. Slightly reduced for some reason. Some surface rust staining on one but no pitting. Shipping: Winner pays actual shipping cost. There is NO surcharge for handling packaging etc. whatever UPS or USPS quoted that's what will be on your invoice. Usually I ship all items next business day after receiving payment. For local pick-ups please contact me first but generally it could be arranged- Chicago NW side. Thanks for visiting!
Used Kennametal Adjustable Boring Bar With Boring Head TOPNOTCH-2026L
Used Kennametal Adjustable Boring Bar With Boring Head TOPNOTCH-2026L Brand: Kennametal Boring Head Model:TOPNOTCH-2026L Bar Length: 10" Bar Diameter: 2-1/2" Sold As Is Where Is. With no implied warranty or guarantee. Our Inventory# 8134 Information is Preliminary. Subject to Buyer Verification. If you would like to inspect this item please contact us to make arrangements. We are a member of the MDNA(Machinery Dealers National Association) Orca Machine Tools. Inc. is a stocking used machine tools dealer in Albertville, MN. Please contact us with any questions you may have. There is a $20 loading charge on freight shipments. Buyer is responsible for all shipping costs. US Buyers: Insurance is provided at the buyers request and at the buyers cost. International Buyers are required to pay for Insurance. Please wait for an Invoice from ... moreus prior to sending payment. If you wish to purchase multiple items. We combine items for shipping and send you an invoice for all items with the combined shipping price. Minnesota buyers will be charged sales tax. Payment in full must be made within 2 days of bid closing. We accept PayPal. Funds must clear prior to item shipment. Visit our eBay Store! Powered by The free listing tool. List your items fast and easy and manage your active items.
GARDNER-DENVER 2-VA 930388 SERVO SPINDLE SPINDEL-NR
USED BUT GOOD WORKING CONDITION! T-3-15 TOP BEGGING) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13fd36577a3-0x104-
SCHMIDT PRESS 4-111-92 MANUAL ARBOR PRESS
SquareTrade © AP6.0 SquareTrade © AP6.0 Fox Electronics“Honesty& Integrity = Longevity” Since 1984! You are bidding on the following item(s) SCHMIDT PRESS 4-111-92 MANUAL ARBOR PRESS Description/ Condition: used- working condition Warranty: Item is being sold with a 100% money back warranty(Buyer is responsible for all warranty return shipping costs) Payment Terms: Payment is expected within 72 hours of auction close. PayPal only please California Residents- Add 9% Sales Tax· FOX ELECTRONICS reserves the right to cancel sales contract with the awarded bidder and relist awarded item at our discretion should payment be delinquent according to our terms. Please do not send email directly to our yahoo account as it is not monitored on a regular basis. All email must be sent through our e b a y account Shipping: We do not ship ... moreinternationally(Local pickups are welcome at no additional costs if you are located near Hayward California) By Appointment Only) Shipping& Handling Time: We try to ship all awarded items via United Parcel Service or USPS within one or two business days of auction close. In the event you require faster service please contact our sales department via email through our e b a y account to arrange this. Please do not send email directly to our yahoo account as it is not monitored on a regular basis. All email must be sent through our e b a y account( FOX ELECTRONICS reserves the right to end any and all auctions early as all items are also offered for sale locally! Thank you for showing an interest in our items and good luck to you if you decide to bid. For our previous consumers thank you for your continued support! Should you have any questions or concerns please feel free to contact our sales team through our e b a y account email! All emails will be addressed M-F 8:30am– 4:00pm. All emails received after these hours will be addressed the following business day! FOX ELECTRONICS 29150 Simms Ct. Hayward CA 94544 PH: 510.259.1804 FX: 510.259.1807
BOSCH 863 PNEUMATIC AIR CYLINDER 5" STROKE 3" BORE USED
Sale is for One(1) USED BOSCH 863 PNEUMATIC AIR CYLINDER 5" STROKE 3" BORE This has very light scratches The cylinder in the photos is the one you receive This comes as shown Spec's; Spec's are Mfg- Bosch Stroke- 5" Ports- 3/8" npt Shaft- 1" Dia Type- Double acting Customer pick-ups welcome at; KAE Industrial 3145 Akron Road Wooster.Ohio 44691 Location- D-1-2 Inv. ART001 We Combine Shipping Thanks Kurt
1/2" NPT Pipe Threading Tap Driver Extension Tool Holder 5" Long
Good used pipe tap extension. We offer a Money back Guarantee if you are not happy with this item. I will refund your full Ebay purchase price if you return it within the time period listed in this listing. And if it is returned in the same condition as when I first shipped it, and if you are willing to pay for the return shipping. I will combine items for you and ship them in the same box when possible. If you do buy additional items from my ebay store please do not send payment until I send you a total for combined shipping. I can ship this item to an International destination but the shipping amount listed above for shipping to the USA is not the same amount it will cost for international shipping. There will be a $4 packing fee in addition to actual shipping costs, so please do not send payment until I send you a total. If you would like ... morea shipping quote before you bid just ask. Call us or message us with any questions. Please send Payment within 10 business days after the close of the listing. If this item ends on a Friday or on the weekend or an extended holiday weekend I may not be able to send you a total until Monday or the day after the holiday. If in Michigan the state does require you to pay state sales tax. Thanks! I do not add my zip code to address below because they might change our zip code AGAIN. Then I will have to change the zip code in every one of my ebay listings and that just takes way too much time, if you need it just ask. DJ Machinery 3407 3 Mile rd nw Grand Rapids. MI 616-791-9395
R8 - 1 1/4" SHELL MILL ARBOR-NO NAME-GOOD CONDITION-
R8- 1 1/4" SHELL MILL ARBOR-NO NAME-GOOD CONDITION-HAS INITIALS CMC SCRIBED ON IT NO MFG PACKGEING INV#78101-16 Powered by The free listing tool. List your items fast and easy and manage your active items.
R8 - 1 1/2" SHELL MILL ARBOR-NO NAME
R8- 1 1/2" SHELL MILL ARBOR-NO NAME-GOOD CONDITION-HAS INITIALS CMC SCRIBED ON IT NO MFG PACKGEING INV#78101-17 Powered by The free listing tool. List your items fast and easy and manage your active items.
PARKER BENCH PRESS CLICKER PRESS AIR PRESS 24" STROKE
Sale is for(1) USED PARKER CYLINDER AIR PRESS This has some scratches shown in photos This has been tested and works as it should The speed can be adjusted for up or down stroke The one shown in the photos is the one you receive Spec's; Height- 75-1/4" Width- 13" Depth- 14" Max Opening- 28-1/2 Piston Dia. 5/8 Weight- 111 lb Location- E Thanks Kurt 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13fd6dc3577-0x103-
PAIR OF EXTRA LONG SHELL MILL ARBORS W/ NMTB40 SHANKS + SPACERS
aims PAIR OF EXTRA LONG SHELL MILL ARBORS W/ NMTB40 SHANKS + SPACERS read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Brown& Sharpe. These are 2 Shell Mill Arbors + Spacers in good condition. Specifications: Spud/ Arbor Sizes: 1" Shanks: NMTB40. Projections: 14" to 15" Overall Lengths: 18" to 19" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. PAIR OF EXTRA LONG SHELL MILL ARBORS W/ NMTB40 SHANKS + SPACERS Reliable Tool Inc. c 2011 | Powered by
Used Floring Morse Taper Socket #2MT to #3MT Hoder
Used Floring Morse Taper Socket#2MT to#3MT Hoder. Good Working Condition.
2 3/16" x 7/32" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER
2 3/16" x 7/32" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER BACK SPOT FACER HOLDERS 3/16" SINGLE BAYONET DRIVE 7/32" 212" PILOT/SHANK DIAMETERS 3-7/8" OVERALL LENGTH(Lot Quantity = 2) This listing is for 2 new tool holders in good general overall condition with some minor wear from use. This is an assortment of two slightly different pilots; both have a 3/16" diameter bayonet lock drive and measure approx 3-7/8" overall length. One has a drive slot that's been ground to be larger than originally manufactured and has a pilot/shank diameter of approx.212" The other pilot has a standard drive slot(though slightly worn) with a pilot/shank diameter of approx 7/32" For use holding high speed back/ inverted spot facers or countersinks with 3/16" single bayonet lock drive. ... moreDon't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/
.748 x .748 x .748 SINGLE BAYONET DRIVE SPOT FACER PILOT ARBOR TOOL HOLDER
748 x.748 x.748 SINGLE BAYONET DRIVE SPOT FACER PILOT ARBOR TOOL HOLDER SPOT FACER HOLDER.748" SINGLE BAYONET DRIVE(605" at Major Flat. 550" at Angled Flat) 748" PILOT DIAMETER.748" STRAIGHT SHANK 8" OVERALL LENGTH This listing is for 1 lightly used tool holder in good general overall condition with only some minor surface wear like dings and scratches. For use holding spot facers or countersinks with.748" drive which appears to be a single bayonet lock drive. Marked"MM285-S.748X8" Don't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple ... moreitems are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exceed 4lbs for Small Flat Rate Boxes. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will n
3/4 x 63/64 x 1 x 1/4 BALL PIN DRIVE SPOT FACER CUTTER PILOT ARBOR TOOL HOLDER
3/4 x 63/64 x 1 x 1/4 BALL PIN DRIVE SPOT FACER CUTTER PILOT ARBOR TOOL HOLDER SPOT FACER HOLDER 3/4" BALL PIN DRIVE 1/4" BALL PIN SLOT 63/64" PILOT DIAMETER 1" Straight Shank with Flat 10-1/4" OVERALL LENGTH This listing is for 1 lightly used tool holder in good general overall condition with some minor surface wear like small scratches. For use holding spot facers or countersinks with 3/4" diameter x 1/4" slot ball pin drive. Marked 1310-R-5BS MIDWEST. Don't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items are purchased with USPS Flat Rate ... morebox shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exceed 4lbs for Small Flat Rate Boxes. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship to unconfirmed or unregistered
3/4" x 1-1/8" x MT3 DUAL BAYONET DRIVE SPOT FACER PILOT ARBOR TOOL HOLDER
3/4" x 1-1/8" x MT3 DUAL BAYONET DRIVE SPOT FACER PILOT ARBOR TOOL HOLDER SPOT FACER HOLDER 3/4" DUAL BAYONET DRIVE(550" at Major Flats) 1-1/8" PILOT DIAMETER MT3- 3 Morse Taper Shank 8-1/2" OVERALL LENGTH This listing is for 1 lightly used tool holder in good general overall condition with only some minor surface wear like dings and scratches. For use holding spot facers or countersinks with 3/4" drive which appears to be a dual bayonet lock or balanced drive. Marked"565 ECLIPSE 124-T" Don't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple ... moreitems are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exceed 4lbs for Small Flat Rate Boxes. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We w
5 .900" x 5-7/8" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER
5.900" x 5-7/8" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER BACK SPOT FACER HOLDERS.900" SINGLE BAYONET DRIVE.900" PILOT/SHANK DIAMETER 5-7/8" OVERALL LENGTH(Lot Quantity = 5) This listing is for 5 tool holders in good general overall condition with some minor surface wear like scratches and spots of oxidation. Some of these appear like they may be unused. Though we are selling them as such due to uncertainty. For use holding high speed back/ inverted spot facers or countersinks with approx.900" single bayonet lock drive. Don't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items ... morethat are shipped at same time. If multiple items are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exceed 4lbs for Small Flat Rate Boxes. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be sh
4 5/32" x 6" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER
4 5/32" x 6" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER BACK SPOT FACER HOLDERS 5/32" 153" Actual) SINGLE BAYONET LOCK DRIVE 5/32" 153" Actual) PILOT/SHANK DIAMETER ABOUT 6" OVERALL LENGTH(Lot Quantity = 4) This listing is for 4 tool holders in good general overall condition with some minor surface wear from use. For use holding back/ inverted spot facers or countersinks with approx 5/32" single bayonet lock drive. Each tool holder is about 6" overall length. Don't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items ... moreare purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exceed 4lbs for Small Flat Rate Boxes. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not s
.750-H x 1" x 1" NATIONAL 2 SPLINE DRIVE SPOT FACER PILOT ARBOR TOOL HOLDER
750-H x 1" x 1" NATIONAL 2 SPLINE DRIVE SPOT FACER PILOT ARBOR TOOL HOLDER SPOT FACER HOLDER.750"H NATIONAL DRIVE 1" PILOT DIAMETER Spiral Grooved 1" Straight Shank 10-1/4" OVERALL LENGTH This listing is for 1 lightly used tool holder in good general overall condition with some minor surface wear like dings and scratches. For use holding spot facers or countersinks with.750-H National drive. Patent#2120623. Don't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items are purchased with USPS Flat Rate box shipping. All items purchased must be able to ... morefit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exceed 4lbs for Small Flat Rate Boxes. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship to unconfirmed or unregistered shipping addresses, we also will not ship to third p
4 1/8" x 8" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER
4 1/8" x 8" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER BACK SPOT FACER HOLDERS 1/8" SINGLE BAYONET LOCK DRIVE 1/8" PILOT/SHANK DIAMETER 8" OVERALL LENGTH(Lot Quantity = 4) This listing is for 4 tool holders in good general overall condition with some minor surface wear from use like scratches and oxidation as seen. For use holding back/ inverted spot facers or countersinks with approx 1/8" single bayonet lock drive. Each tool holder is 8" overall length. Don't miss your chance to own this item now! Please note that there were multiples of this item at the time of listing. Each in like condition and represented in the pictures. They will be shipped at random unless the buyer requests otherwise. See pictures for more details and information of condition and please make sure that this ... moreis what you need before purchasing, as it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exce
5/16" x 15/32" x MT2 ECLIPSE BAYONET LOCK SPOT FACER PILOT ARBOR TOOL HOLDER
5/16" x 15/32" x MT2 ECLIPSE BAYONET LOCK SPOT FACER PILOT ARBOR TOOL HOLDER SPOT FACER HOLDER 5/16" BAYONET LOCK DRIVE 15/32" PILOT DIAMETER MT2- 2 Morse Taper Shank 9-1/4" OVERALL LENGTH This listing is for 1 tool holder in good general overall condition with some minor surface wear like dings and scratches from light use. Also. The locking drive slot has been ground slightly wider than originally manufactured as seen. For use holding spot facers or countersink cutters. Marked"454 ECLIPSE 41-AE-40002" Don't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. ... moreIf multiple items are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exceed 4lbs for Small Flat Rate Boxes. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address onl
.300 x .340 x 6-3/4 x MT2 DUAL BAYONET LOCK SPOT FACER PILOT ARBOR TOOL HOLDER
300 x.340 x 6-3/4 x MT2 DUAL BAYONET LOCK SPOT FACER PILOT ARBOR TOOL HOLDER SPOT FACER HOLDER.300" DUAL BAYONET LOCK DRIVE.340" PILOT DIAMETER MT2- 2 Morse Taper Shank 6-3/4" OVERALL LENGTH This listing is for 1 tool holder in good general overall condition with some minor surface wear like small nicks and scratches. This tool holder was originally manufactured to size 5/16" drive x 11/32" pilot. Although this item appears like it may be unused. We are selling it as such due to condition nd uncertainty. For use holding spot facers or countersink cutters. Marked"1255 ECLIPSE 110-1/2-T 11/32 x 5/16" Don't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. ... moreYou can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exceed 4lbs for Small Flat Rate Boxes. PAYMENTS: We offer Master Card. Visa
3 9/32" x 8" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER
3 9/32" x 8" BAYONET LOCK BACK INVERTED SPOT FACER PILOT ARBOR TOOL HOLDER BACK SPOT FACER HOLDERS 9/32" 2817 actual) SINGLE BAYONET LOCK DRIVE 9/32" PILOT/SHANK DIAMETER 8" OVERALL LENGTH(Lot Quantity = 3) This listing is for 3 tool holders in good general overall condition with some minor surface wear from use like scratches and oxidation as seen. Some of these appear unused. Though we are selling them as such due to uncertainty. For use holding back/ inverted spot facers or countersinks with approx 9/32" single bayonet lock drive. Each tool holder is about 8" overall length. These are marked MM285-S.2817 x 8" Don't miss your chance to own this item now! Please note that there were multiples of this item at the time of listing. Each in like condition and represented in the pictures. They will ... morebe shipped at random unless the buyer requests otherwise. See pictures for more details and information of condition and please make sure that this is what you need before purchasing, as it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items are purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is
5/16 x 11/32 x .525 x MT2 DUAL BAYONET LOCK SPOT FACER PILOT ARBOR TOOL HOLDER
5/16 x 11/32 x.525 x MT2 DUAL BAYONET LOCK SPOT FACER PILOT ARBOR TOOL HOLDER SPOT FACER HOLDER 5/16" DUAL BAYONET LOCK DRIVE 11/32" PILOT DIAMETER.525" PILOT BUSHINGS MT2- 2 Morse Taper Shank 9-1/4" OVERALL LENGTH This listing is for 1 tool holder in good general overall condition with some minor surface wear like dings and scratches from light use. Includes two pilot bushings which make the diameter approx.525" For use holding spot facers or countersink cutters. Marked"1050 ECLIPSE" Don't miss your chance to own this item now! See pictures for more details and information of condition and please make sure that this is what you need before purchasing. As it is non-returnable. Thank you. You can save on combined shipping when purchasing multiple items that are shipped at same time. If multiple items ... moreare purchased with USPS Flat Rate box shipping. All items purchased must be able to fit within the specified boxing size requirements. The shipping price may need to be adjusted with multiple lot or item purchases. The shipping calculator cannot be programed to determine how many lots or items can fit within the box size, as they are predetermined for one lot/item, though multiples may or may not fit. Box sizes are predetermined prior to listing. The customer will be subject to a revised shipping invoice when items exceed the requirements, or if multiple shipping boxes are required. Please contact us if you have questions regarding combined shipping with Flat Rate Boxes. Medium) Flat Rate Boxes are 11" x 8-1/2" x 5-1/2" or 11-7/8" x 3-3/8" x 13-5/8" Small Flat Rate Box is 5-3/8” x 8-5/8” x 1-5/8” and Large Flat Rate Box is 12-1/4" x 12-1/4" x 5-1/2" Total weight must not exceed 20lbs for International Medium and Large Flat Rate Boxes, and must not exceed 4lbs for Small Flat Rate Boxes. PAYMENTS: We offer Master Card. Visa, and Discover Credit Cards, as well as Pay-Pal, which will be shipped to a confirmed address only! We will not ship
JACOBS MFG CO. ARBOR #3P002, CHUCK ARBOR 2M.T. 3/8"X24 THD ENGLAND
THE JACOBS MANUFACTURING CO. LTD. CHUCK ARBOR#3P002 2M.T. 3/8" X 24 THD ENGLAND APPROX 3 5/8" IN LENGTH*PLEASE VIEW PICTURES CAREFULLY- SOLD AS IS* OLD STOCK* PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please note this item is"AS IS" with NO WARRANTY OR GUARANTEE STATED NOR IMPLIED. Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING. All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charges to shipping. Approximate weight: 1 lbs. PLEASE CONTACT US FOR A FREIGHT QUOTE. Please note we are not experts in ... morethe parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities RAB/ 3528/ SKID#141/ 1) E