|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 250 Amp Water-Cooled WP-20F (flexible head) TIG complete torch with 25-ft cable. 2 13N10 Alumina Ceramic Cup #6 (3/8" orifice) 1.
Buy It Now
Free Shipping Condition: New Location: Winona, United States CK Worldwide Part # CK225SF FX. Torch Series: CK200. CK Worldwide uses a unique head assembly that provides the largest water jacket available in an 18 ... moreor 20 series torch. With this type of construction, CK provides over 4 x the surface area for maximum heat transfer versus competitive torch heads!
Buy It Now
Free Shipping Condition: New Location: Walton, United States 1x 17GL040 Collets Body Stubby Gas Lens 1.0mm 040". 1x 17GL116 Collets Body Stubby Gas Lens 1.6mm 1/16". 1 x 17GL332 Collets Body Stubby Gas Lens 2.4mm ... more3/32". 1 x 17GL18 Collets Body Stubby Gas Lens 3.2mm 1/8".
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States With excellent plasticity, toughness and crack resistance, especially low temperature impact toughness higher. Uses: for a variety of locations of the ... morepipeline TIG welding arc welding and arc welding, can be satisfied with the welding joints.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Parts Table for TIG Torch Accessory Kit (T23D) Torch Collet 10N23S Stubby Collet 1/16" (1.6mm) 1. 10N24S Stubby Collet 3/32" (2.4mm) 1. TIG Torch Accessory ... moreKits. TIG Torch Parts. 13-pcs TIG welding torch accessory kit forStubby Gas Lens setup (1/16" and 3/32") in torch 17, 18 and 26 series.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 1x 17GL040 Collets Body Stubby Gas Lens 1.0mm 040". 1x 17GL116 Collets Body Stubby Gas Lens 1.6mm 1/16". 1 x 17GL332 Collets Body Stubby Gas Lens 2.4mm ... more3/32". 1 x 17GL18 Collets Body Stubby Gas Lens 3.2mm 1/8".
Buy It Now
Free Shipping Condition: New Location: China 1 x WP-17FV Welding Torch. Rubber torch with high insulation property. Welding current: 150Amp. Protective layer:denim cover. Suitable for all types of ... morewelder after the connector is modified. 1 x extra accessory kit.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Parts Table for TIG Torch Accessory Kit (T55A) TIG Torch Accessory Kits. TIG Torch Parts. Torch Collet 10N22 Collet 0.040" (1.0mm) 1. TIG Complete Torches. ... more1 5-pcs TIG torch accessory kit for regular setup (0.040" and 1/16") in torch 17, 18 and 26 series.
Buy It Now
Free Shipping Condition: New Location: San Diego, United States Fupa 12 Ceramic Mug Complete Kit for Wp-17 18 and 26 Series Tig Torches. 2 FUPA #12 Flared Ceramic Mugs. 3 Diffusers (one diffuser per cup and a spare ... morediffuser). Fits most WP-17, 18, 26 flashlights.
Buy It Now
Free Shipping Condition: New Location: San Diego, United States 1 set TIG Welding Torch Accessories. 2: Especially suitable for all TIG torches WP-26, also suitable for WP-17, WP-18. 1: High quality welding accessories ... morefor your welding work. Glass cup: 6# 7# (1.6 aperture); 8# 10# (2.4 aperture); 12# (3.2 aperture).
Buy It Now
Free Shipping Condition: New Location: Rancho Cucamonga, United States Specifications: Item name: Welding Tool Accessories Kit Material: Metal Color: Mixcolor Fit For: WP-17/18/26 Applicable Scope: TIG Note: There might be ... morelittle error of size for manual measurement. The colors deviation might differ due to different monitor settings, please kindly understand. Package Includes: Welding Tool Accessories Kit.
Buy It Now
Free Shipping Condition: New Location: Sioux Falls, United States Hand-Held Water-Cooled TIG Welding Torch. CK Worldwide uses a unique head assembly that provides the largest water jacket available in an 20 series torch. ... moreWith this type of construction, CK provides over 4 x the surface area for maximum heat transfer versus competitive torch heads!
Buy It Now
Free Shipping Condition: New Location: Duluth, United States WeldingCity® 10-pcs Large Gas Lens Kit 0.040" TIG Welding Torch 9/20/25 T42 USA. WeldingCity® 2-pk Long Ceramic Cup 10N48L #6 3/8" TIG Welding Torch 17/18/26 ... moreUSA. Parts Table for TIG Torch Accessory Kit (T7).
Buy It Now
Free Shipping Condition: New Location: Walton, United States 250 Amp Water-Cooled WP-20F (flexible head) TIG complete torch with 25-ft cable. 2 13N10 Alumina Ceramic Cup #6 (3/8" orifice) 1.
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Collet Body:24mmx14mm. 1x Collet Body. 3:They are excited compatible with original common spare parts TIG torch.In this case. 1:Transparent shield cup ... morelift welders an extrodinary visibility and comfortable during during the welding job.It is designed to help to weld precision and tiny job where it requires to see the location very clearly.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 1 x 17GL040-.040" Collets Body Stubby Gas Lens, 1 x 17GL116-1/16" Collets Body Stubby Gas Lens. 1 x 17GL332-3/32" Collets Body Stubby Gas Lens, 1 x 17GL118-1/8" ... moreCollets Body Stubby Gas Lens. Stubby Gas Lens with Pyrex Glass Cup.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States WeldingCity® 10-pcs Accessory Kit Regular Setup 3/32" TIG Welding Torch 9/20 T36. WeldingCity® 2-pk TIG Welding Large Gas Lens LONG Ceramic Cup 57N74L ... more#8 1/2" USA. Parts Table for This TIG Welding Torch Accessory Kit (T40).
Buy It Now
Free Shipping Condition: New Location: Perth Amboy, United States Collet Body:24mmx14mm. 1x Collet Body. 3:They are excited compatible with original common spare parts TIG torch.In this case. 1:Transparent shield cup ... morelift welders an extrodinary visibility and comfortable during during the welding job.It is designed to help to weld precision and tiny job where it requires to see the location very clearly.
Buy It Now
Free Shipping Condition: New Location: Pacific, United States Fits most WP-17, 18, 26 type torches including 150, 210, 300, 510 Trimline, FL3L, CKM350, CWHTL300, CWH350, CWM350 style TIG torches with silicone bodies ... moreincluding Lincoln© PTA-17 torch found on the Lincoln© Precision TIG 175, 185 and 225, Miller© Diamond Back DB-17 torches on the Econo Tig, Syncrowave 180, 200 welders, and Weldcraft© WP-17, WP-18, WP-26 torches.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States WeldingCity 10. TIG Torch Accessory Kits. TIG Torch Parts. TIG Complete Torches. Stick Welding. 150Amp air-cooled torch body withflexible head. Welding ... moreSafety. Handle H-100 included.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Torch Series: CK17. CK Worldwide Part # CK17-12-RSF RG. • Hand-Held Air-Cooled TIG Welding Torch. What Series is my Torch?. Standard features include: ... moreBrass instead of copper head (eliminate seizing, stripping or galling of threads) Fail-Safe hose fittings (no wire ties required) Silicon rubber insulation provides best protection against high frequency leakage.
Buy It Now
Free Shipping Condition: New Location: Fort Lauderdale, United States TIG TORCH SETS. TIG TORCH PARTS & ACCESSORIES. TIG TORCH CONSUMABLES. High-Quality, Super Flex, Braided Hoses compatible with Weldcraft, Miller, Lincoln, ... moreand other WP Series Water-Cooled TIG Torches. Compatible with WP-20 (250 Amp) and WP-18 (350 Amp) Water-Cooled TIG Torches.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Parts Table for TIG Torch Accessory Kit (T23B) Torch Collet 10N23S Stubby Collet 1/16" (1.6mm) 1. 10N24S Stubby Collet 3/32" (2.4mm) 1. TIG Torch Accessory ... moreKits. TIG Torch Parts. Collet Body 4CB116 collet Body 1/16" 1.
Buy It Now
Free Shipping Condition: New Location: Ontario, United States 1x 17GL040 Collets Body Stubby Gas Lens 1.0mm 040". 1x 17GL116 Collets Body Stubby Gas Lens 1.6mm 1/16". 1 x 17GL332 Collets Body Stubby Gas Lens 2.4mm ... more3/32". 1 x 17GL18 Collets Body Stubby Gas Lens 3.2mm 1/8".
Buy It Now
Free Shipping Condition: New Location: Pasadena, United States 1x 17GL040 Collets Body Stubby Gas Lens 1.0mm 040". 1x 17GL116 Collets Body Stubby Gas Lens 1.6mm 1/16". 1 x 17GL332 Collets Body Stubby Gas Lens 2.4mm ... more3/32". 1 x 17GL18 Collets Body Stubby Gas Lens 3.2mm 1/8".
$15.00 Shipping Condition: Used Location: Spring, United States It has been tested and works great with no known issues.
Buy It Now
Free Shipping Condition: New Location: Denver, United States 12 ceramic cup kit is made for #9 and #20 style torches, and is set up for use with a 3/32" (2.4mm) electrode. Fit DB SR WP 9/20/25 WP 17 18 26 TIG Welding ... moreTorch. Part Number TIG Welding Cup. Currently the 12 is designed for use with 3/32" electrodes only.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States WP-17F flexible torch Head body Quantity:1pcs Summary Of Our Selling Policies Shipping Detail Shipping time: USA. 7 to 13 business days Canada. 15 to ... more20 business days Austrralia. West Europe 20 to 45 business days Other Country: 30-60 business days If you want choose Expedited shipping. Please Contact us before payment. and we will send you an invoice. The item will be dispatched in the same day or next working day after received payment in usual. If have any special case, we will inform you& get your confirmation. For the cost of combined shipping. Please contact us for further negotiation. We only ship to the approved address given in PayPal payment. Please make sure payment address in PayPal is correct. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. A notification email of dispatch will be sent to buyer after item is posted. Please email us if you don't receive our email after 5 days of full payment sent. Please contact us if you have any difficulty in getting your items after 40 working days. import duty Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. Payment Method We prefer accept PayPal Payment method, Any currency is ok as long as accepted by PayPal. Calculating the amount just according to the exchange rate of intraday. Please note we also accept the wire transfer or others. A non-payment dispute will be opened if full payment is not received after 14 days of auction. Return Policy In the unlikely event that a return is request. All returns must include all original items undamaged. In re-saleable condition. All original packaging including manuals, warranty forms, etc. Shipping and handling fees are not refundable. Buyer is responsible for shipping costs incurred shipping products back. contact us Please leave us an Eb
Buy It Now
Free Shipping Condition: New Location: 金东区, China Especially suitable for all TIG welding guns WP-26, also suitable for WP-17, WP-18. 1 Set TIG Welding Gun Accessories. Quality welding accessories for ... moreyour welding jobs. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
Buy It Now
Free Shipping Condition: New Location: United States 7Pcs TIG Welding Torch Stubby Gas Lens Ceramic Cup Kit Fit For WP-17/18/26 UE. 71PCS TIG Welding Torch Stubby Gas Lens #12 Glass Cup For WP-17/18/26. ... more58Pcs Tig Welding Torch Stubby Gas Lens Consumables Cup Kit For Wp-9/20/25 US.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States WeldingCity® Power Cable Gas Hose 57Y03R (Rubber) 25-ft TIG Welding Torch 9/17. WeldingCity® 10-pcs Large Gas Lens Kit 3/32" TIG Welding Torch 9/20/25 ... moreT44 USA. WeldingCity® 16-pcs Large Gas Lens Kit. 040"~1/8" TIG Welding Torch 9/20/25 T33.
$6.00 Shipping Condition: New Location: Easley, United States Vulcan TIG Parts Kit - Item #63786. New.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States 1 pcs 13N21. 040" TIG Collet. 1 pcs 13N22 1/16" TIG Collet. 1 pcs 13N23 3/32" TIG Collet. 1 pcs 13N24 1/8" TIG Collet. Applicable Scope: TIG. 1 pcs 45V45 ... more1/8" TIG Gas Lens Collets Body. 1 pcs 45V44 3/32" TIG Gas Lens Collets Body.
Buy It Now
$8.60 Shipping Condition: New Location: Elk Grove Village, United States The FUPA 12 Cup kit uses a #12 Flared Pyrex Cup, and it will fit a 9 series or 20 series torch. This kit is primarily designed for the fabricator who ... moreis working with exotic materials (4130 Tubing, Titanium, Stainless Steel) making critical welds.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Independence, United States Note: Complete set minus one piece!
$54.97 Shipping Condition: New – Open box Location: Dora, United States This handy kit fits 17 and 26 series air cooled torches and 18 series water cooled torches. This is suit for just purchased a TIG welder; this is a great ... morestarter kit. 28pcs package including as below: Quantity Descriptions Remark(Reference number) 10pcs TIG torch welding alumina cup 17 18 26 2pcs Alumina nozzles 5# D8.0 x 47mm Ref No: 10N49 2pcs Alumina nozzles 6# D9.5 x 47mm Ref No: 10N48 2pcs Alumina nozzles 7# D11.0 x 47mm Ref No: 10N47 2pcs Alumina nozzles 8# D12.50 x 47mm Ref No: 10N46 8pcs TIG torch welding collets body 17 18 26 2pcs collets body Ø1.0mm.040" Ref No: 10N30 2pcs collets body Ø1.6mm 1/16" Ref No: 10N31 2pcs collets body Ø2.4mm 3/32" Ref No: 10N32 2pcs collets body Ø3.2mm 1/8" Ref No: 10N28 8pcs TIG torch weld welding collets 17 18 26 2pcs collets Ø1.0mm.040" Ref No: 10N22 2pcs collets Ø1.6mm 1/16" Ref No: 10N23 2pcs collets Ø2.4mm 3/32" Ref No: 10N24 2pcs collets Ø3.2mm 1/8" Ref No: 10N25 2pcs TIG torch welding back cap 17 18 26 1pcs long back cap Ref No: 57Y02 1pcs short back cap Ref No: 57Y04 2pcs TIG torch welding Cup Gasket 17 18 26 1 pcs Cup Gasket 18CG, 1 pcs Inset back insulator 18-7, This kit fits all 17& 26 series air cooled torches and 18 series water cooled torches. Including the Lincoln PTA-17. PTA-18 and PTA-26 torches, Miller Diamondback DB17. DB18 and DB 26 torches, along with the Weldcraft WP-17. WP-18 and WP-26 torches. Summary Of Our Selling Policies Shipping Detail Shipping time: USA. 7 to 13 business days Canada. 15 to 20 business days Austrralia. West Europe 20 to 45 business days Other Country: 30-60 business days If you want choose Expedited shipping. Please Contact us before payment. and we will send you an invoice. The item will be dispatched in the same day or next working day after received payment in usual. If have any special case, we will inform you& get your confirmation. For the cost of combined shipping. Please contact us for further negotiation. We only ship to the approved
Buy It Now
Free Shipping Condition: New Location: Sioux Falls, United States Hand-Held Air-Cooled TIG Welding Torch. Standard features include: Brass instead of copper head (eliminate seizing, stripping or galling of threads) Fail-Safe ... morehose fittings (no wire ties required) Silicon rubber insulation provides best protection against high frequency leakage.
Buy It Now
Free Shipping Condition: New Location: Fort Lauderdale, United States TIG TORCH SETS. TIG TORCH PARTS & ACCESSORIES. TIG TORCH CONSUMABLES. High-Quality, Super Flex, Braided Cables compatible with Weldcraft, Miller, Lincoln, ... moreand other WP Series Water-Cooled TIG Torches.
Buy It Now
Free Shipping Condition: New Location: Winona, United States This accessory kit fits the following torches: CK-210, TL-210, FL-250, CK-300, TL-300, CK-18, TL-18, CK-26, TL-26 also will fit Weldcraft WP-18, WP-26, ... moreWP-17 Torches. Does not include any gas lenses.
Buy It Now
Free Shipping Condition: New Location: Rowland Heights, United States 1 x 17CB20-1.0 Collets Body Stubby Gas Lens. 1 x 17CB20-2.4 Collets Body Stubby Gas Lens. 1 x 17CB20-3.2 Collets Body Stubby Gas Lens. 1 x 17CB332-2.4 ... moreCollets Body Stubby Gas Lens. 6 x #12 Pyrex Glass Cup 15×2.5×25mm.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Parts Table for TIG Torch Accessory Kit (T15) TIG Torch Accessory Kits. TIG Torch Parts. TIG Complete Torches. 10-pcs TIG torch 1/8" accessory kit forgas ... morelens set-up in torch 17, 18 and 26 series. Other TIG Welding Torch Accessory Kits.
Buy It Now
Free Shipping Condition: New Location: Richmond, United States TIG Gas Lens Collet body Glass Cup #10 5/8" Insulators Gaskets 598882 Back cap 41V35 Assorted Size kit Fit WP 9 20 25 TIG Welding Torch 26pcs. TIG Gas ... moreLens collet body Insulation Cup Kit for PTA DB SR WP 9 20 25 TIG Torches.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Parts Table for TIG Torch Accessory Kit (T54B) TIG Torch Accessory Kits. TIG Torch Parts. TIG Complete Torches. 15-pcs TIG torch accessory kit forregular ... moregas lens setup (3/32" and 1/8") in torch 17, 18 and 26 series.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Torch Series: CK20. • Hand-Held Water-Cooled TIG Welding Torch. CK Worldwide uses a unique head assembly that provides the largest water jacket available ... morein an 20 series torch. With this type of construction, CK provides over 4 x the surface area for maximum heat transfer versus competitive torch heads!
Buy It Now
Free Shipping Condition: New Location: Secaucus, United States TIG welding torch collet gas lens pyrex glass cup kit. Collet Body Gas Lens: approx. Collet: approx. Fits all 9 series air cooled welding torches and ... more20 series water cooled torches, Lincoln PTA-9 PTA-9V PTW-20 Tig Welding Torches, Miller Diamondback DB9 DB9V DB 20 Tig Welding torches.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States WeldingCity® 17-pcs Gas Lens Kit. 040"~1/8" TIG Welding Torch 9/20 T32 | USA. WeldingCity® 31-pcs Regular & Gas Lens Kit. 040"~1/8" TIG Welding Torch ... more9/20 T24. WeldingCity® 23-pcs Long Cup Gas Lens Kit. 040"~1/8" TIG Welding Torch 9/20 T32B.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States 12 ceramic cup kit is made for #9 and #20 style torches, and is set up for use with a 3/32" (2.4mm) electrode. Fit DB SR WP 9/20/25 WP 17 18 26 TIG Welding ... moreTorch Currently the 12 is designed for use with 3/32" electrodes only.
Buy It Now
Free Shipping Condition: New Location: Lawrenceville, United States EGM04/24L5-W5
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Premium Weldcraft® style brass 105Z57 with electrical stud hole and female fitting 5/8-18 RH and 3/8-24 RH. WeldingCity® 2-pk TIG Welding Torch Body WP-9V ... moreValve Head Air-Cool 125A ' USA. WeldingCity® 2-pk TIG Welding Torch Head WP-18FV Flex-Valve 350A Water-Cool ' US.
Buy It Now
Free Shipping Condition: New Location: Fort Lauderdale, United States Dinse 35-70 Plug 3/8"-24 Cable Connection, with 18" gas hose and - 5/8"-18 RH nut for 9 and 17 Series TIG Torches - Model: LDT-917F. High-quality solid ... morebrass Dinse Style TIG Welding Cable Plug Connector with Argon Hose.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Parts Table for TIG Torch Accessory Kit (T55B) TIG Torch Accessory Kits. TIG Torch Parts. Torch Collet 10N22 Collet 0.040" (1.0mm) 1. TIG Complete Torches. ... more1 5-pcs TIG torch accessory kit for regular setup (0.040" and 1/16") in torch 17, 18 and 26 series.
Buy It Now
Free Shipping Condition: New – Open box Location: High Ridge, United States 18pc Pyrex Gas Saver Conversion kit for Series 17 - 18 - 26 TIG torches - for more precise welding of both common and exotic materials - you can SEE what ... moreyou are welding. 5 x Pyrex Cup Heatshield (CK3P8GS) - 32mm -Fused Quartz NOT Pyrex.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Parts Table for TIG Torch Accessory Kit (T6B) TIG Torch Accessory Kits. TIG Torch Parts. TIG Complete Torches. 22-pcs TIG torch accessory kit forGAS LENS ... moreREGULAR AND LONG CERAMIC CUP setup (0.040", 1/16", 3/32" and 1/8") in torch 17, 18 and 26 series.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Parts Table for This TIG Welding Torch Accessory Kit (T32) WeldingCity® TIG Welding Gas Hose 45V10 25-ft for Water-Cool Torch 20 ' US. WeldingCity® 5-pk ... moreCeramic Cup Nozzle 13N11 #7 7/16" TIG Welding Torch 9/20 ' USA.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States Parts Table for TIG Torch Accessory Kit (T11) TIG Torch Accessory Kits. TIG Torch Parts. TIG Complete Torches. 10-pcs TIG torch accessory 1/8" kit for ... moreregular set-up in Torch 17, 18 and 26 series. Other TIG Welding Torch Accessory Kits.
Buy It Now
Free Shipping Condition: New Location: 金东区, China TIG Torch, 3/32 Gas Lens #12 Pyrex 2.4mm Collet Kit for WP-17, 18, 26. Compatible with original common spare TIG torches. It is designed to help Welding ... moredelicate and tiny jobs that require a very clear view of the position.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States WeldingCity® 5-pk Gas Lens Ceramic Cup 54N14 #8 TIG Welding Torch 17/18/26 ' USA. WeldingCity® 2-pk TIG Welding Large Gas Lens LONG Ceramic Cup 57N74L ... more#8 1/2" USA. Parts Table for TIG Torch Accessory Kit (T23).
Buy It Now
Free Shipping Condition: New Location: Santa Fe Springs, United States 1 x Tig Heat Shield Gloves. 1 x Tig Pen.
Buy It Now
Free Shipping Condition: New – Open box Location: United States • K1622-5• TWIST-MATE ADAPTER ASSEMBLY FOR PTW-250 And/Or PTW-35
K4168-2 20H-320-25R water cooled Tig TorchKP510Lincoln Magnum Parts Kits provide all ... morethe torch accessories you need to start welding. Parts Kits provide 3 collets, 3 collet bodies, a back cap,3 alumina nozzles and3 tungstens in a variety of sizes, For PTW-20 Series TIG Torches.
Buy It Now
Free Shipping Condition: New Location: Duluth, United States WeldingCity TIG Welding Torch PTA-17F Flex Head 150A 12-FT Repl. for Lincoln PTA. WeldingCity® 5-pk Ceramic Cup Nozzle 13N08 #4 1/4" TIG Welding Torch ... more9/20/25 USA. WeldingCity MIG Welding Gun Torch Stinger 250A 12-ft Repl for Miller M-25 169596.
|
|
|
|
Tig Mop 'Anywhere' (Cordless) Weld Cleaner Kit
Ex Demo Tig Mop'Anywhere' Cordless) Weld Cleaner Kit Excellent Full Working Condition. Only 9 months old with 3 months warranty left. Kit Includes: Tig Mop'Anywhere' Cordless Machine. Charger and Leads(RRP £2399.00) Cyclone 780 Weld Cleaner Solution 5 Litre(Worth £93.00) Cyclone 770 Neutraliser Solution 5 Litre(Worth £38.00) 10 x Spare Brushes(Worth £120.00) Site Case(Worth £32.00) If bought new. This full kit is worth over £2,600! Grab a bargain now! 20%VAT will be added to the value at the end of the auction.
|
|
|
Klein Welding tig kit with Collets,Cups, Tungsten and barrel bur bits.
As the title says I have a Used Tig Kit with Collets. Cups, and Tungsten + Barrel bur bits. Unit is Used bit in great condition. I only ship to the United States. 1t.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bhpojt%3Af%3E1t-13e058eacd1-0xfe-
|
|
|
Weldcraft Air Cooled Tig Torch Kit, WP-17F Torch, AWG-4 Cable, 24R-MBP Connect
Surplusmeister Weldcraft Air Cooled Tig Torch Kit Includes: Weldcraft WP-17F Torch. Weldcraft 25 foot AWG-4 welding cable. 25 foot Air line. Tweco 24R-MBP connector. This is a used surplus item. Untested by seller. Thanks for looking. Don't miss the other great deals on our page! Our Policies: The majority of our items are Surplus. New Surplus(unused) and Used Surplus. There are some items we sell that are Factory New and they will be listed as new. All our items will be sold as is- unless otherwise stated. Questions are welcomed and encouraged prior to purchase. All inquires will be answered within the same or next business day. Payment PayPal is the preferred method of payment. Shipping All items ship within 1 business days of receiving cleared payment. All domestic items are shipped via UPS ground unless otherwise stated. All international ... moreItems are shipped via USPS unless otherwise stated. Terms of Sale Pictures are of the actual item. UNLESS OTHERWISE SPECIFIED. No accessories or manuals included unless otherwise pictured and stated above. We try to give accurate descriptions of our items. However, we use the description from the manufacturer and these descriptions may or may not be entirely accurate. We are not responsible for these inaccuracies. All items are sold-as-is. No warranty, expressed or implied on this item. Most items offered for sale are used and may contain defects not immediately detectable. We are surplus equipment dealers and do not have the ability or expertise to test equipment for functionality beyond plugging it in and ensuring it powers up/ on. Unless otherwise stated. Please look closely at pictures. Only items shown are included. Used items may have writing, engraving, paint, etc. on the item that may or may not be seen in the pictures. This item will ship via UPS within the USA. Please use our calculator below for accurate rates. Outside of the US we ship by USPS and you will need to contact us for a shipping quote. We ship daily. Monday through Friday. We take pride in pac
|
|
|
Worldwide CK17 Flex Head TIG Torch Kit + Extras
This listing is for a Worldwide CK17 Flex Head TIG Torch Kit + Extras This kit includes: Worldwide CK17 Flex Head Tig Torch 25' Nylon Weave Rubber Hose- Red(unmarked) Western Enterprises Valved Y Connection(Marked"Fuel Gas Left Hand(112) Victor Cutskill 4000 psi Flo-Meter/Regulator(lightly used. Light rounding on the nut) 2) Weldcraft TIG Torch Power Adapter(105Z57) 3) 5 Ceramic Cups(3C5) 4) 6 Ceramic Cups(3C6) 3) Small Collet Bodies(marked 3/32. Fits in the#5 cup) 4) Medium Collet Bodies(marked 3/32. Fits in the#6 cup) 5) Collets(marked 3/32. Seems to fit both#5 and#6) Original Kit Box with Manual/Parts List. For more information on this torch: Worldwide CK17 Manual PDF) Happy shopping! 4ffc.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*77%3E4ffc-13e2ace1379-0xf3-
|
|
|
THERMAL ARC 161S TIG/STICK INVERTER WELDER KIT
The Thermal Arc ® 161 S Portable DC Welder is designed for Stick& Lift TIG welding operations and provides a greater range of output for the advanced hobbyist or light industrial applications. It is capable of delivering 110 Amps on 115 Volt circuits for Stick& TIG welding. When used on 208-230 Volt circuits. Maximum output is 160 Amps for either welding process. This welder features optimized hot start and arc-force circuits delivering superior arc starting and control when Stick welding. Versatile. Multi-process Stick/TIG capability 160 Amps maximum welding output Excellent. Smooth& stable arc performance Highly efficient inverter design Multi-voltage input power 115& 208-230 VAC Simple& easy. Ready to weld package Lightweight and portable This is a used machine that works great,
|
|
|
Welding Tig Rig Kit With Argon Cable, Dual Victor Flow Meter And Flex Head Torch
The Tig Rig kit contains: 25 ft black power cable-50 ft argon green hose-WP26V Weldcraft Tig torch flex head-ground block-dual Victor flow meter All parts are in very good condition and barely used(maybe a couple of hours of use) The flow meter itself costs more than the price of the entire kit. So this is one of the best deal you can find. I will list soon more welding supplies, so stay tuned. Please let me know if you are looking for certain welding accessories in particular. Thank you for looking. No international buyers, please. Only US territories. Posted with
|
|
|
Hook-Up kit for PTW-18 and PTW-20 TIG torches, Tig Torch Accessories KP 504
Lincoln Tig Torch Accessories KP 504 includes: Hook-Up kit for PTW-18 and PTW-20 TIG torches. Includes 12.5 ft. 3.8 m) water hose, 12.5 ft. 3.8 m) gas hose. Water adapter fittings, water hose coupler, and power cable adapter. Item sold as is. No returns or repairs Buyer incurs all shipping costs. Seller located in Dallas, PA
|
|
|
Miller Dynasty 200SD AC/DC Tig Stick Welder Pkg Regulator Contractor kit Bottle
You are bidding on a like new and great working Miller Dynasty 200SD 907099 AC/DC Tig Stick Welder Pkg with Regulator and Extras. Its had maybe a days usage. Welder works on 115/230/460v and 1/3 phase. Has auto line and detects what's its plugged in to. The 100% Argon bottle is empty and will only come with the package if picked up locally(it can't be shipped) Item is for sale locally and I reserve the right to end the listing if it sells. Please any and all questions prior to bidding. Happy Bidding! Due to Ebay now charging the seller fees on shipping it will cost a little extra with insurance about $100 with welder and all extras and will ship Via FedEx Ground. Payment is due within 3 days of auction end less then 5 positive feedback buyers must contact me first or bid may be cancelled! PROCESSES TIG(GTAW) DC, TIG(GTAW) AC, Pulsed ... moreTIG(GTAW-P) AC- Not available on SD model, Pulsed TIG(GTAW-P) DC- Not available on SD model, Stick(SMAW) DC, Stick(SMAW) AC, Air Carbon Arc Cutting and Gouging(CAC-A) MATERIAL TYPE Max 1/4 in(6.4 mm) Steel, Min 0.004 in(0.1 mm) Max 1/4 in(6.4 mm) Aluminum, Min 0.020 in(0.5 mm) GENERAL SPECIFICATIONS Input Power, 3- or 1-Phase Power, Rated Output, 200 A at 18 V. 20% Duty Cycle. 150 A at 16 V. 60% Duty Cycle 140 A at 15.6 V. 40% Duty Cycle 100 A at 14 V. 100% Duty Cycle. Stick 200 A at 28 V. 20% Duty Cycle 130 A at 25.2 V. 60% Duty Cycle 100 A at 24 V. 60% Duty Cycle 90 A at 23.6 V. 100% Duty Cycle. Welding Amperage Range, 1-200 Amps(1-150 on 120 VAC) Net Weight, 45 lb(20.5 kg) Hours 6hrs. 14min Arc Starts 1.871
|
|
|
Tig Torch kit for Miller Dynasty Welder + adapter + ground clamp + argon hose
Description TIG torch for the use with Miller Dynasty Welders. Comes with the ground wire/clamp. Stick adapter/wire, argon hose(not shown) and Miller adapter. Complete kit! The top part of the torch is bendable to your liking. Ground clamp is small and made of brass/copper alloy. All items show signs of use. But they are in excellent working condition. They have been used at home on small projects. Payment I accept Visa. MasterCard, American Express, and Discover through PayPal or personal checks. I DO NOT ACCEPT international cashier's checks, company checks nor do I accept credit card payments over the phone. Please note, PayPal's buyer and seller protection policies require that I ship to the confirmed address used at the time a payment is made. Shipping Smaller items will be shipped via USPS Priority Mail while larger items will ... morebe shipped via USPS Parcel Post. I reserve a right to refuse to ship to certain destinations. Such as Afghanistan, Nigeria, etc. even if listing does not specifically excludes these countries. Also. EBay shipping calculator shows approximate shipping amount. Once your item is packed and weighted, I will put actual shipping cost on your invoice. If it turns out(and has happened many times in the past) that shipping charges are higher than estimated, buyer is expected to pay the difference. I will provide a proof of how much I paid. Terms of Sale Unless otherwise noted. All sales are final. No return or exchanges, unless the item is significantly different from listing description. Buyer is encouraged to buy insurance. I cannot be help liable for damage during shipping. If you have a question about the item, please ask it before bidding or buying. I return messages promptly. Do not assume anything! About Us I trade on eBay since 2002 and respect eBay community. Rules and regulations. I enjoy doing business with people and sold my items all over the world. I hope you will have a pleasant experience buying from and selling to me. If you are unhappy about the transaction, I encoura
|
|
|
WeldCraft WP-26V Tig Torch Complete Kit Welding Cable Hose Electrode 25ft
Used WeldCraft WP-26V Torch Welding Cable Kit Made in USA Approx 25 feet Shipped by Ups Ground
|
|
|
Miller TIG Welder PFC Kit for Syncrowave - Power Factor Correction
This is a set of power factor correction(PFC) capacitors for Miller welders. I have used them on Syncrowave 250/350. And on an Aircrafter 330ST. They are very easy to install, and Miller has the instructions on their site. It reduces your welder's current draw under load and improves its power factor. I have since upgraded my power service and no longer need the kit. Posted with
|
|
|
Miller Maxstar 150 STH PULSE TIG + Stick KIT and CASE USED + FINGERTIP CONTROL
For sale today is a used Miller Maxstar TIG and Stick welding kit that includes what you see in the picture. It does include the case and fingertip control for the tig torch. I never used it as a stick welder but it does include the stinger for a stick. The welder is used and shows signs of use but is still a very good alternative to the cost of a new kit. The reason I am selling is that I recently upgraded to a Miller Dynasty machine and so it is time for the Maxstar to find a new owner. If you need more pics or have questions let me know.
|
|
|
Miller Dynasty Tig Runner welder cart w/ Coolmate 3 cooler, gas cyl, torch kit
Miller Dynasty/Maxstar Tig Runner welder cart package w/ XXL gas cylinder MILLER DYNASTY 300DX WELDER IS NOT INCLUDED. ALREADY SOLD YOU GET EVERYTHING PICTURED EXCEPT MILLER DYNASTY 300DX WELDER Miller's list price on this package is $2773 you get these 5 items listed below: 1) Miller Tig Runner cart part# 300244(list price $739) 2) Miller Coolmate 3(rated 600 amp) water cooler part# 043007(list price $842) 3) BRAND NEW Miller RCCS-14 hand amp control part# 043688(value $233) 4) Weldcraft water cooled tig torch kit part# 300185(list price $659) includes: 25 ft Weldcraft® torch. Cable cover, torch accessory kit, regulator/flowmeter, 12 ft rubber gas hose. Water-cooled Dinse torch adapter, and 12 ft weld lead with clamp and Dinse connector. 5) empty X-Large 330 cubic ft. capacity welding gas cylinder(list price $300) buyer may arrange ... moretheir own shipping If you need a shipping quote. Call FreightCenter.com for shipping quotes. They have very good rates. call Todd Eaton at 1-800-716-7608 ext.1056 free local pickup Steve 386-308-3908
|
|
|
MILLER Dynasty 200SD 907099 TIG PowerSource Stick with Kit 195055 Complete USA
For your consideration is Miller Dynasty 200 SD Tig and Stick Power Source in excellent condition included with Miller Contractor Torch and Pedal Kit. WeldCraft Torch and Hose are New and Unused still wrapped in the factory ties. Model: Dynasty 200 SD 907099 and Torch Kit with foot control RFCS-14HD 195055 Serial: LG340455L Specification: Input AC Voltage 115V. 120V, 200V, 208V, 220V, 230V, 240V, 260V, 380V, 400V, 415V, 416V, 440V, 460V Input Power: 115 Volts; 3 Phase; 50/60 Hz; 200-460 Volts; Single Phase; 50/60 Hz, Rated Output. TIG, 3 Phase: 200 Amps; 18 VDC; 20% Duty Cycle; 150 Amps; 16 VDC; 60% Duty Cycle, Rated Output. TIG, Single Phase: 150 Amps; 16 VDC; 60% Duty Cycle; 140 Amps; 15.6 VDC; 40% Duty Cycle; 100 Amps; 14 VDC; 100% Duty Cycle, Rated Output. Stick, 3 Phase: 200 Amps; 28 VDC; 20% Duty Cycle; 130 Amps; 25.2 VDC; 60% Duty ... moreCycle, Rated Output. Stick, Single Phase: 130 Amps; 25.2 VDC; 60% Duty Cycle; 100 Amps; 24 VDC; 60% Duty Cycle; 90 Amps; 23.6 VDC; 100% Duty Cycle, Output Range: 1-200A AC/DC, Dimensions(H X W X D) 13 1/2" X 7 1/2" X 21 1/2" Features: Auto-LIne™ Power Management Technology allows for input voltage hookup(115-460V) with no manual linking. Providing convenience in any job setting ideal solution for dirty or unreliable power. Fan-On-Demand™ cooling system operates only when needed. Reducing noise, energy use and the amount of contaminants pulled through machine. Lift-Arc™ starting provides x-ray clean welds in AC or DC arc starting without the use of high-frequency, Blue Lightning™- high-frequency arc starter for non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set and increases productivity. Compatible with Wireless Remote Controls. Improve productivity. Eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Extended AC Balance(30-99% controls the a
|
|
|
Snap-On FLEXTIG12 Tig Torch kit for all Muscle Mig welders.
Snap-On FLEXTIG12 Tig torch kit Allows any Snap-On Muscle Mig welder from MM140SL. MM250SL and MM350XL to perform DC TIG welding. Includes 12' cable. Tig torch with power and gas lines, and instructions included. This Snap-on tig torch is used but is very clean and in like new condition. It has been used only one time when it was new. Includes 12' cable to allow MM140SL. MM250SL and MM350XL to perform DC TIG welding.
|
|
|
LIGHTLY-USED WELDCRAFT TIG TORCH LS17 MULTIMATIC 200 TORCH 257107 W/ AK2C KIT
PRE-OWNED) LIGHTLY- USED) WELDCRAFT TIG TORCH LS17 MULTIMATIC 200 TORCH 257107 WITH AK2C TIG ACCESSORY CERIATED KIT. WE PROVIDE CLOSE UP PICTURES, WHAT YOU SEE IN PICTURES IS WHAT YOU ARE BIDDING ON. ITEM WAS TESTED BEFORE LISTING IT& IS IN 100% WORKING CONDITION. GOOD LUCK BIDDING! THERE WILL BE A NEW YORK STATE SALE TAX RATE OF 8.875% AND IT WILL BE ADDED TO THE FINAL SALE PRICE FOR ANY NEW YORK BUYER. ITEMS HAVE: THE FOLLOWING: VERY-LIGHT WEAR AND TEAR, SCRATCHES. SCUFF MARK'S.ECT ON ITEM FROM NORMAL USE. IT IS YOUR RESPONSIBILITY AS A BUYER TO VIEW ALL THE PICTURES BEFORE BIDDING. PICTURES SPEAKS LOUDER THAN WORDS. PLEASE LOOK AT MY OTHER ITEMS SHOWING RIGHT NOW ON eBay. Any questions? Please feel free to email me or call me at 347-624-3796 Robert
|
|
|
Prostar 17 tig kit
150 amp tig rig has regulator that worked last time I used it. Ground clamp and lead with quick connect, stinger with lead and quick connect, gas hose and line to torch, one cup and lenses one rat tail modified and piece of tungsten, scratch start can provide more pics on request
|
|
|
MILLER MAX STAR STL 150 STICK / TIG WELDER DC WITH TIG KIT NICE IN CASE
I AM SELLING A MILLER MAX STAR 150STL STICK AND TIG WELDER KIT IN CASE. IT IS USED BUT IN NICE SHAPE AND ALL IN GOOD WORKING ORDER. THEY GO FOR $1500-$1700 NEW.
|
|
|
Hobart 150 Sti Tig/Stick Welder Kit W/Case 150STI
Hobart 150 Sti Tig/Stick Welder Kit W/Case 150STI Product Description: Welder has been lightly used. Well taken care of and is in excellent condition. Works. The case has some scratches& scuffs. Low OCV Stick-reduces open-circuit voltage to 13V Portable/lightweight 115/230v primary power Gas solenoid lift-Arc Start-provides Sold as pictured Shipping and Handling is Calculated Using the eBay Calculator(below) Please note: All items are inspected thoroughly before listing and shipping to be verified that they are as described here. All outgoing packages are inspected thoroughly before shipping to assure that they are packed according to USPS and UPS shipping guidelines. Pictures may be representative of the item and not the"actual" item offered for sale; such is especially the case with"stock" photos. Box art. Manufacturer ... moredesign and such may vary. All items are sold"as is. We are not experts and product specs may be unintentionally inaccurate, buyer should research with manufacturer before bidding- no returns for errors of this nature. If you bid, you are entering into a legally binding contract and you agree to our terms. Thank you, and happy bidding! Please read our terms and policies( http:stores.ebay.com/tcspawnco/Our-Policies.html) carefully before bidding. On Jun-13-12 at 08:56:04 PDT. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
TIG WELDING TORCH KIT HW-18 & EXTRA HEAD SR-18 - UNION CARBIDE CORP
TIG WELDING TORCH KIT HW-18& EXTRA HEAD SR-18 THE HOSE IS 25’ LONG–MARKED UNION CARBIDE CORP 125-125-250 THE HW-18 HEAD IS UNION CARBIDE CORP THE EXTRA HEAD MARKED SR-18 COPPER TIP THE UNITS APPEAR TO BE GENTLY USED NO SIGNS OF MAJOR WARE THIS IS FROM AN ESTATE SHOP CLEAN UP CAN’T TELL YOU ANY MORE PLEASE READ: WE DO THE BEST TO DESCRIBE OUR ITEMS CORRECTLY AND THAT IS WHY WE TAKE PICTURES. ASK QUESTIONS BEFORE YOU BID IF YOU DO NOT SEE IT IN THE PICTURE. THE PICTURE WILL ALWAYS OVERRIDE THE DESCRIPTION BECAUSE WE ARE NOT PERFECT. ALL ITEMS ARE SOLD AS THEY STAND/ NO RETURNS ACCEPTED*PLEASE CHECK SHIPPING AND HANDLING CHARGES BEFORE BIDDING. HANDLING and INSURANCE(if applied) ARE INCLUDED IN THE SHIPPING CHARGES. WE ALWAYS TRY TO USE RECYCLED PACKAGING MATERIALS TO SAVE ON COST… ALL PAYMENTS MUST BE MADE THRU PAY PAL. AND PAID WITHIN ... more3 DAYS AFTER AUCTION ENDS. UNLESS IT IS A BUY IT NOW OR OTHER ARRANGEMENTS ARE APPROVED.
|
|
|
Miller Dynasty DX200 DX 200 Tig Welding Inverter Welder Machine w/contractor KIT
Miller Dynasty DX200 Machine in EXCELLENT Condition. Used by an individual for One and only Classic Car restoration. Has never been used in a business shop. Very low hours of use. Purchased new from Luke Auxier Weld Mart in the United States. I am the original owner. What you see in the pictures is what you will get. It includes SSC Foot Control. Special Weldcraft torch and Miller Elite Automatic Helmet. Arc welding outfit is included in contractor kit. Various assortment of tungsten come with the unit. Again the unit is in excellent condition and only worked with Pure grade Argon Gas( NA50 named in Europe) After your purchase you will be informed of every step of shipment status. You will receive 2 packets. One the main unit and one with the accessories. All at your door within 10 working days. Free shipping What you will need to put the ... moremachine in use: 1. Replace the European plug with an American plug either single phase or 3 phase. European plug will not be included) 2. Replace the Hexagon European gas inlet on gauges with an American thread one. 3. Add new batteries on helmet. Thanks for looking. PLEASE NOTE: I ONLY SHIP MACHINE to USA. CANADA& European Union. NO Exceptions.
|
|
|
WELDCRAFT WP-17V TIG Torch Water Cooled Kit, w/ Victor Flowmeter and 25' Cable
Up for auction is a pre-owned"WELDCRAFT WP-17V TIG Torch Water Cooled Kit. W/ Victor Flowmeter and 25' Cable" This WELDCRAFT TIG Torch was acquired previously owned at our store and is in good condition. Cosmetically has signs of previous usage. The cable is wrapped onto a tank hanging frame that was included from the original owner. Please see pictures of product for details. WELDCRAFT WP-17V TIG Torch Water Cooled Kit. Output Range(Amps) 150 Amp DC, 115 Amp AC(60 Percent Duty Cycle) GTAW/ TIG Welding Water Cooled For Thin To Medium Materials, Includes Torch Body, Handle, Flowmeter and 25 Ft. Rubber Cable. WELDCRAFT WP-17V TIG Torch: Series WP/ Output Range(Amps) 150 DC. 115 AC VICTOR MEDALIST HRF 1425-580 Flowmeter Regulator Argon: 3000 PSIG Total length of cable is approximately 25 Ft. RR- Only what is pictured is what is ... moreon auction. If it is not in the pictures. Then it does not come with the auction. Buy With Confidence! Please take a moment to read our auction policies: Customer Service Policies If you cannot complete the payment transaction please do not bid on the item. Items have a three(3) day from confirmed receipt of goods return policy unless otherwise stated. This means you have three(3) days from confirmed receipt(FedEx or USPS time stamp) to let us know you are not happy! We will not- under any circumstance- honor our return policy if it is stated in the item description that the item is being sold"as is" No exceptions to this policy will be considered. Our return policy will also not be honored in instances of"Buyer's remorse" The return policy will. However, be gladly honored if the item is not as described. We do our best to describe every item accurately, but have been known to make mistakes! We will be more than happy to leave feedback after a Buyer’s feedback has been posted. Office Hours are between 10 a.m. and 6 p.m. Mountain Time(Phoenix. Arizona) Monday through Friday(excluding major Holidays) email is checked frequently. Response time almost always
|
|
|
Tweco Thermadyne AK-35-18R MIG / TIG Adapter Kit - TLAK7-353-S / LAK-352 / AK353
Search Our Store: Tweco Thermadyne AK-35-18R MIG/ TIG Adapter Kit- TLAK7-353-S/ LAK-352/ AK353 Welcome to ONE1STOPAUCTIONS Tweco Thermadyne AK-35-18R MIG/ TIG Adapter Kit- TLAK7-353-S/ LAK-352/ AK353 Items were not tested. Presented as in working order. Kit includes: TLAK7-353-S Gas Solenoid valve(for MIG-GUN wire feed adapter kit use on Lincoln No LN-4 and No LN-7 wire feeders) AK353 Gas Hose with Clamp LAK-352 Wire Feed Adapter Plug for MIG-GUN fitted to take.030" Original Box Solenoid Valve and Gas Hose are in original packaging. The adapter plug plastic casing come on and off easily. Good cosmetic condition! Please view Photos Carefully. We Are Pottstown Cash Traders 232 East High Street Pottstown. PA 19464 SHIPPING | PAYMENTS | RETURNS | ABOUT US | CONTACT US Continental US shipping is quoted in the auction. We do not sell or ship ... moreinternationally Shipping& handling is quoted flat rate parcel post or priority for the U.S. Parcel post shipping does not include tracking. Only delivery confirmation. Parcel post can take up to 11 working days. Larger packages will be assessed according to the U.S.P.S. charges past zone 5. All items selling for over $250.00 will include signature confirmation. Please contact us for a quote on larger items. If you feel that our shipping& handling is too high-PLEASE do not bid. Handling charges are included in the shipping charges. We offer local pick up in our store at 232 East High Street. Pottstown, Pa. There is a $4.00 handling fee for local pick up PA residents will be charged 6% sales tax If you see the package has been damaged in shipping. Please return before opening! We gladly accept Paypal Payment is expected within 5 days. If you have any questions regarding this listing or payment information. Please feel free to email through Ebay or call us at 610-705-0304. We are Open Monday thru Friday 10am to 6pm EST. We describe each item the best we can. Many items we sell are previously used& will not include anything but the item. What you see in our photos is w
|
|
|
Weldtec SR20 25' TIG TORCH KIT
Used Weldtec Tig torch. Works fine. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-146b5b11dff-0x10b-
|
|
|
Everlast PowerTig 315LX AC DC TIG Stick Pulse Welder & Starter Kit
Everlast PowerTig 315LX AC DC TIG Stick Pulse Welder 220/240 Volt Inverter Digital readout for accurate setting of amperage controls. Color coded controls are easy to find and understand. Economy 18 series 12 ft. water-cooled torch and accessories 315 Amp AC/DC Pulse TIG/ 250 Amp Stick Welder 12 ft. Everlast 18 Series TIG torch with 35 series DINSE style connectors and torch switch for 2T/4T operation Stick electrode holder with 10 ft. cable and 35 series DINSE style connectors, Work clamp with 10 ft. cable and DINSE style connectors, Foot pedal, Everlast regulator made from billet brass, Consumable starter kit, 6 ft Power input cable(3 phase) If you have any questions or would like to see additional pictures. Please feel free to ask. We like to give good feedback and like to receive it in return. So if there are any issues. Please feel free ... moreto contact us in order to resolve. It is our goal to receive a 5 star rating on every transaction we make on ebay.
|
|
|
Miller Multimatic 200 Multi-purpose Welder w/ Tig Contractor Kit
The Miller Millermatic 200 is the only all-in-one. Portable, multiprocess power source from Miller is our most versatile machine to date. Weighing only 29 pounds and running on either 120 or 230 V, the Multimatic 200 can go anywhere. Auto-Set Elite Auto-Set Elite can be used on multiple materials and multiple processes with the ability to fine-tune your settings. Simple to set up and use! Excellent arc characteristics! Multimatic 200 offers positive arc starts and an extremely stable arc with minimal spatter on both mixed gases and straight CO2. Simple Aluminum Solution Spoolmate 100 direct-connect spool gun offers a reliable and economical solution for welding aluminum up to 1/4 inch with 4043 aluminum wire. Fan-On-Demand Miller's Fan-On-Demand technology operates only when needed reducing noise. Power consumption and the amount of airborne ... morecontaminants pulled through the machine. Ultimate Durability The Multimatic 200's impact-resistant case provides strength and durability. Protecting the internal components and welding wire. Plugs in Anywhere! Multi-voltage plug(MVP) allows you to connect to common 120 or 230 V power receptacles without the use of any tools—choose the plug that fits the receptacle and connect it to the power cord. Miller's Auto-Line Technology Provides state-of-the-art flexibility. Automatically connecting to 115 or 230 VAC, single-phase power without removing the cover to re-link the power source. TIG Contractor Kit The Multimatic 200 TIG Contractor Kit(301130) gives you everything you need for remote TIG welding with the Multimatic 200. Comes complete with: Multimatic 200 power source• Power cord and MVP plugs for 120 and 230 V• 10-ft. 3 m) Bernard Q150 MIG gun• 13-ft. 4 m) lead with electrode holder and 25-mm Dinse connector• 10-ft. 3 m) work lead with clamp and 25-mm Dinse connector• Two contact tips for.030-in. 0.8 mm) wire. And two contact tips for.035-in. 0.9 mm) wire• Dual-groove quick-change drive rolls for.024-in. 0.6 mm) or.030/035-in. 0.8/0.9 mm) wire• Smit
|
|
|
Miller Maxstar 200 SD TIG Welder Stick Welder With lots of extras Kit in case
Miller Maxstar 200 SD TIG Welder Stick Welder all on one With extra Kit in case see all 12 of the zoom pictures of the items you will receive. Not pictured not included. Nice slightly used condition with lots of NEW never used Parts. Pictures are as much of the description as the description" web info below Maximum flexibility- Miller Electric combines advanced inverter technology with Auto-Line technology. Offering the most flexible AC/DC TIG/Stick power supply in the welding industry. Features: SD Model: Provides the basic features that are required for most TIG or Stick welding applications. Blue Lightning™- High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenace on solid state components. Preset parameters for tungsten sizes ... morefrom.020- 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications. Custom settings are programmable. Lift-Arc™ start provides TIG arc starting without use of high frequency. Portable in the shop or at the job site- at 37lb the unit is easily moved from location to location. Tailored arc control(DIG) allows the arc characteristics to be changed for specific appications and electrodes. Smooth running 7018 or stiffer. More penetrating 6010. Hot Start™ adaptive control provides positive arc starts without sticking. Low OCV Stick is a simple design that reduces open-circuit voltage to 9-14 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Auto-Line™ provides state-of-the-art flexibility by automatically connecting to 120-460 VAC. Single- or three- phase power without removing the covers to relink the power source. No longer is there a concern if you have the correct machine for the shop or the job site. Fan-On-Demand™ operates only when needed reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. Wind T
|
|
|
Miller contractor kit for tig welding 195054 w/ foot pedal RFCS-14HD
Item is listed as used but is in like new condition and never used by me. I bought this and other torch welding stuff years ago but I'll never use it all and only keeping the bare essentials for stick welding and torches. The rest goes. Please check out the pics shown and feel free to ask any questions or requests for more pics. Ask all questions before bidding, do not assume anything. Sold as is with no implied warranty. The reserve is about half price of MFGR list price. Thanks for looking! 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-147a4c224c2-0x113-
|
|
|
Thermal Arc 95 S Inverter Arc Welder Kit with Tig Torch Package MINT! 95S
Up for NO RESERVE auction is a Rarely used Thermal Arc 95 S Inverter Arc Welder Kit Comes as pictured with Tig Torch Package This was used maybey 3 times at most and is still in what i consider mint condition! W1003206.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-147dd544c1a-0x10e-
|
|
|
Lincoln Invertec V205-T AC/DC TIG Welder (K1855-4) complete setup/kit w/EXTRAS!!
Used. Lincoln Invertec V205-T AC/DC TIG Welder(K1855-4) complete setup/kit. includes: lincoln V205-T ac/dc power supply 115/230volt single phase 50/60Hz(manufactured in 2011) Lincoln K870 foot pedal with 25' cable, Gentec argon regulator with 10'hose, ground clamp with 12' cable, Pro star#17 tig torch with 12' cable, PLUS extra collets and nozzles. all in good working condition. please email any questions, thank you
|
|
|
Henrob 2000 welding cutting system torch kit welds like tig cuts like plasma
This auction is for a new in open box Henrob 2000 cutting welding torch kit. the box has been opened. There is some dust from sitting around awhile. But the gun inside has not been used. Save a bunch and purchase this one. Free shipping price is for lower 48 states only. Thanks for looking. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1481956c673-0x11a-
|
|
|
Radnor WP225 AMP Flexible WATER COOLED MODULAR 20/24/9 TIG TORCH 5pc kit 25'hose
Used. Radnor WP-225 AMP Flexible WATER COOLED MODULAR 20/24/9 TIG TORCH 5pc kit 25' rubber hose.all in great working condition. includes 3 modular#20, 24, 9 heads and 1 short end cap.please email any questions, thank you
|
|
|
TIG TORCH ACCESSORY KIT. FREE SHIP.
VARIOUS TIG TORCH ACCESSORIES. VERY GOOD/EXCELLENT CONDITION. FREE SHIPPING.
|
|
|
Miller Maxstar 200 SD TIG Welder W/ Miller 195054 Foot Pedal Kit And More
Miller Maxstar 200 SD TIG Welder BUNDLE Miller Maxstar 200 SD(903701) Welder Welder is USED Operates on 120/240/480 Volt from 1 to 200 Amps Digital Display Shows Minor Signs of Wear From Use With Miller 195054 RFCS-14HD Contractor Kit With Case Calling the Foot Pedal USED Looks NEW Foot Pedal Stock No. 194744/ Style No. LJ-51 Sealed WeldCraft AK2C Torch Accessory Kit Weldcraft WP-17 Torch Line and Tip Smith Gas Regulator Also#2 Work Clamp Cables: 1 Stock Ground Cable#1 100ft Carolprene 2GA Welding Cable 600 Volt Ground Cable More Accessories Included: 2 Miller Ends#2 Miller 195378 Adapter Torch- INTNL Style Gas(9. 17) Tips#4 Firepower E-6013 Sticks*PLEASE BE ADVISED* Power Source to Welder has Been Sliced Converted From The Stock 220 Line to 110 Power End This DOES NOT Effect the Machines Function(Please Refer to Picture) Please Feel Free ... moreto Ask Any Questions and I will Answer to the Best of My Knowledge Can Send More Detailed Pictures is Anyone Needs or Wants Please See pictures for best description-International Buyers* Please be aware that our shipping charges DO NOT include Duty Taxes. Customs Charges, Etc. We are not responsible for International Taxes and/or charges of any kind. It is Your responsibility to pay what Your country requires for You to pay to bring an item into Your Country. Please Read- You will find this in all of our auctions. Please read the Actual description of each and every item before bidding as well. Yes. We will combine shipping on multiple items when possible. Keep in mind. Sometimes an item maybe too large or too heavy to combine with another. When purchasing multiple items, please wait for a revised invoice to be sent to you after bidding has ended. We do our best to present detailed information about every item we sell(if we can) If you have any questions. Please email us before placing your bid. Thank you. Local buyers may pick-up their items. Please contact us for further information. All items are sold"AS-IS" All items must be assumed(by bidders) used
|
|
|
Snap-On Flex-TIG 25 FLEXTIG25 Torch Kit for Mighty MIG MM140SL MM250SL MM350XL
This auction is for one Snap-On Flex-TIG 25 FLEXTIG25 Torch Kit for Mighty MIG MM140SL MM250SL MM350XL Welder including TIG torch. Supply kits as shown, and Argon regulator/flowmeter as shown. The kit was lightly used and is still in excellent working and cosmetic condition; guaranteed not DOA.
|
|
|
Miller Syncrowave 350 COMPLETE KIT #95119 #951071 TIG Welder 25 torch
Complete kit. Less than 20 hours of run time. Light scratches on top and rust ring where cylinders sit. 1 owner Power Factor Correction $589.00 upgrade#043757 Sequencer Module $415.00 upgrade#300547 Miller syncro 350 $9324.00#951119* 200/230/460 volt@ 50/60HZ* 951071(Actual model designated number stamped on this machine) succeeded to mfg#951119 $10.328 msrp of machine This machine wires into wall. Always been stored/operated in dry, indoor environment*This is located in central Oregon and is a local pick up only it weights 500lbs. that means you need a really long& smooth ramp or a lift gate to get this into your truck at the expense. Liability, and risk to the buyer. Buyer responsible for boxing packaging crating and or all transportation costs. I will be in contact with Winning bidder via phone and ebay communications after auction ... moreends to arrange(after payment clears) taking possession of welder. The Buyer agrees that any item successfully bid upon will be paid for by the Buyer immediately following the conclusion of the auction containing sufficient. Immediate available funds. Security for purchase is the responsibility of the Buyer and begins immediately upon the sale. Removal are at the expense. Liability and risk of the Buyer. Seller shall not be responsible for goods not removed within the specified time period. Seller shall not be responsible for non-delivery. Settlement must be made in full immediately upon the completion of the auction by Paypal. Seller shall retain full security interest in all merchandise until full and complete payment is made. Merchandise not paid for and removed within the specified time period may be resold without notice. The Buyer acknowledges and agrees that no"stop payment" order shall be issued or honored. The Buyer further agrees that a stop payment order marked"insufficient funds" shall be considered prima-facie evidence of intent on the part of the buyer to defraud the seller at the time of delivery of the funds.
|
|
|
SNAP ON TOOLS FLEXTIG TIG 25 CONVERSION KIT
UP FOR SALE IS A GENTLEY USED SNAP ON TOOLS FLEX TIG 25. IT HAS ONLY BEEN USAD ABOUT 5 TIMES. I HAVE NO USE FOR IT ANY MORE. COMES WITH EVERYTHING SHOWN IN PICTURES. THIS KIT WILL FIT- MM140SL. MM250SL, AND MM350XL WELDERS
|
|
|
Lincoln Electric Invertec 155S 120/230V 5-155A Portable Welder + Tig Torch Kit
Powered by Product Description Lincoln Electric Invertec 155-S 120/230V 5-155 Amp-DC Portable Welder w/ Tig Torch Kit! This sale is for a used portable 120/1/50/60 or 230/1/50/60 voltage-input w/ 5 to 155-amp DC output with auto-reconnect to be able to used on a portable generator TIG ready welder kit. Sale includes the portable welder unit. 120/230-volt 15-amp power cord(installed) work clamp with cable, gas regulator(missing one glass lens) TIG torch(Magnum PTA-17V) with ultra-flex cable ONLY! NO MANUAL, TIG ACCESSORIES, CASE, SHOULDER STRAP, EXTRA 120V 20-AMP PLUG, OR STICK ELECTRODE HOLDER IS INCLUDED! Please keep this in mind when puchasing this welder set. The welder and torch are both in very good cosmetic condition and only exhibit minor and basic signs of previous use. This welder is in great operational condition and has been fully ... moretested for functionality! Here is a to the Lincoln Electric webpage on this exact model for more detailed specs/features. On a 1-10 scale. 10 high, this welder would be an 8+! A Paypal account is SUGGESTED but is not required to bid! Pay with your credit/debit card through Paypal only! Payment must be received within 4 days of the close of the auction. If you are unable to pay within 4 days. Please contact us to make arrangements! INTERNATIONAL BUYERS: We recommend USPS Priority service for international shipping. Though UPS can be used as well. Buyer is responsible for the import duties, taxes, VAT, etc. We ONLY declare the actual prices on customs forms, please do not ask us to chage this for your item! ALL SALES TO A KANSAS ADDRESS WILL BE REPSONSIBLE FOR LOCAL SALES TAX! If you are a KANSAS resident do not pay for your item until you have received the invoice with tax applied. Local pickups are accepted. However if you plan on picking up locally DO NOT PAY YOUR INVOICE. Please contact me through Ebay messages informing me you would like to pick up locally. I will then send you and invoice that does not have a cost for shipping but will have a local sales tax ap
|
|
|
MILLER DYNASTY 200 DX AC/DC TIG w/ Foot Control contractors Kit excellent shap
This miller dx 200 dynasty was used for 1 project which was a aluminum sports wheelchair and have not used it since. This unit works flawlessly and is the top of the line unit. Everything you see in photos is what comes with the unit. The Miller Dynasty 200 DX TIG Welder and Air-Cooled Contractor Kit with Foot Control offers pulse on/off. Pulse frequency, peak duty cycle, background amperage, initial amperage, initial slope time, final slope time and final amperage control. Wireless Remote Control Compatible Improve productivity. Eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Lift-Arc Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Blue Lightning- ... moreHigh Frequency Arc Starter For TIG non-contact arc initiation. Provides more consistent arc starts and greater reliability compared to traditional HF arc starters. Easy to set up and increases productivity. Auto-Line Power Management Technology Allows for any input voltage hookup(115-460 V) with no manual linking. Providing convenience in any job setting. Ideal solution for dirty or unreliable. AC Waveforms• Advance Squarewave provides a fast freezing puddle. Deep penetration, and fast travel speeds. Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action. Sine wave is for customers that like a traditional arc. It is quiet with good wetting. Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds. AC and DC TIG Features• Extended AC balance(30-99% controls the amount of oxide cleaning(amperage time in EN) which is essential for high quality welds on aluminum. AC frequency(20-250 hz) controls the width of the arc cone and the force of the arc. DC TIG provides exceptionally smooth and precise arc for welding exotic materials. Stick Features(AC/DC) Tailored arc control(DIG)
|
|
|
Thermal Arc 95S Tig Stick Portable Welding Kit
The Thermal Arc 95 S Tig package model- W1003203. Comes complete with the 17V style TIG Torch(with 10 ft cables and accessory kit) Simple& easy. Ready to weld package Features and benefits: Versatile. Multi-process Stick/TIG capability. High 95 Amp welding output. Excellent. Smooth& stable arc performance. Highly efficient inverter design. Ultra-light for maximum portability(10 lbs. The Thermal Arc 95 S• Thermal Arc 95 S inverter welding power source• 17V style TIG torch 10 ft(3 m) and Accessory Kit. Argon regulator/ flow gauge. Tweco WeldSkill style electrode holder with 10 ft(3 m) lead. Tweco WeldSkill style ground clamp with 10 ft(3 m) lead. 20 Amp adapter plug& cable. Operating manual. Carry case. As the only product in its class. With Stick and Lift TIG capabilities, the 95 S is capable of delivering 95 Amps of power on 115 ... morevolt circuits and allows you to cover a wide range of light maintenance and repair jobs, as well as light fabrication. The inverter welding power source is extremely portable at only 9.7 pounds. USES. Home Hobbyists• Trade Schools• Light Fabrication• Small Businesses• Maintenance and Repair Easy to Use One of the leading features of the Thermal Arc 95 S is how easy it is to use. Created with the do-it-yourselfer in mind. The 95 S simplifies the welding process from setup to clean up. Tackling the tough jobs has never been easier. Bring It Wherever You Go With the 95 S you have the ability to bring high quality welds wherever you go. The unit weighs only 10 lbs and comes in a protective case. Making it the perfect tool when you’re on the move. Ready to weld out of the box• Stick& Lift TIG welding capabilities SPECIFICATIONS: Process Stick(SMAW) Lift TIG(GTAW) Applications Maintenance, Utility/Farm, Home Hobbyist, Input Voltage 115 VAC 1 Phase 50/60hz, Rated Output Stick 90A/ 23.6V@ 20% TIG 95A/13.8V@ 20% Normal OCV 60V, Cooling Fan Cooled, Designed to Protection Class IP23S, Arc Welding Equipment Std EN 60974-1, Power Source Weight 9.
|
|
|
Thermal Arc 201TS TIG/Stick Kit with Case -200A, 115V/208-230V, 1PH, 50/60HZ
WELCOME TO NTLAUCTIONS22.99 CENT AUCTIONS WE HERE AT NTLAUCTIONS22 STRIVE TO BE A FIVE* STAR SELLER. PLEASE CONTACT US BEFORE OPENING A CASE OR LEAVING ANYTHING BUT A POSITIVE REVIEW AND A 5 STAR RATING. Item Description THIS AUCTION IS FOR A: Thermal Arc 201TS TIG/Stick Kit with Tool Box(200A. 115V/208-230V, 1PH, 50/60HZ) HF TIG/Lift TIG/Stick, Remote Control Capable THERE IS NO TANKS OR MANUAL THAT COME WITH THIS ITME AS YOU COULD SEE IN THE PHOTO. OVERALL CONDITION: GOOD MANUFACTURER: THERMAL ARC MODEL# 201TS ACCESSORIES: YES. LOOK AT PHOTOS. INVENTORY# 248394-1#21 FLOOR ADDITIONAL COMMENTS: THIS ITEM COMES AS SHOWN AND DESCRIBED NOTHING ELSE IS INCLUDED. Payment Information: Shipping Information WE ACCEPT PAYPAL ONLY PLEASE CALL US FOR INFO IF YOU ARE LOCAL AND WANT TO VIEW AND CHECKOUT AN ITEM BEFORE THE AUCTION ENDS( 602-242-2255) SALES ... moreTAX WILL BE CHARGED TO ALL LOCAL PICK UPS AND SALES. SHIPPING IS A FLAT RATE TO THE CONTINENTAL 48 STATES.ALASKA, HAWAII, AND PUERTO RICO WILL INCUR ADDITIONAL SHIPPING CHARGES(FOR RATES SEE COST BELOW) ALL ITEMS SHIPPED FED EX GROUND UNLESS OTHERWISE STATED IN SHIPPING TAB. LOCAL PICK UP IS OK. PLEASE CALL( 602-242-2255) TO ARRANGE FOR LOCAL PICK-UP Policy For NTLAUCTIONS22 OTHER SHIPPING CHARGES ALL ITEMS WE SELL ARE PREVIOUSLY OWNED UNLESS OTHERWISE STATED. ONLY THE ITEMS DESCRIBED AND PHOTOGRAPHED WILL BE INCLUDED. SHIPPING ON RETURNS WILL BE PAID FOR BY THE BUYER. THE FOLLOWING STATES AND LOCATIONS HAVE HIGHER SHIPPING CHARGES THAN STATED IN THE AUCTIONS: WE DO NOT SHIP TO APO OR FPO ADDRESSES HAWAII ALASKA PUERTO RICO FOR INTERNATIONAL BUYERS. WE AT NTLAUCTIONS22 CANNOT BE HELD LIABLE FOR ANY DELAYS IN SHIPPING DUE TO INCLEMENT WEATHER, CUSTOMS,TAXES, OR IMPORT DUTIES, IF WE CHOOSE TO AND ARE ABLE TO SHIP TO YOUR LOCATION. PLEASE CALL OR EMAIL TO CHECK IF WE ARE ABLE TO SHIP TO YOU. WE ONLY SHIP EXPRESS MAIL INTERNATIONAL ON ALL ITEMS WITH A VALUE OVER $250.00 AND WE WILL REQUIRE SIGNATURE CONFIRMATION AS WELL. Powered by The free listing tool. List your
|
|
|
Weld Craft Water Cooled Tig Torch Kit (WP-18V-25)
Weld Craft Water Cooled Tig Torch Kit Model WP-18V-25 350 A 25' cable length Lot#144 JMB Industrial Surplus. LLC 704-323-6845 10am-5pm(EST) Sales Policy When you enter a bid for one of our items. You enter into a contract- please place a bid only if you are serious about buying the item. If your offer is accepted, you will enter into a legally binding contract to purchase the item. You are bidding on USED. Pre-owned equipment. All sales are"as-is, seller makes no warranties, express or implied, as to equipment sold. Buyers' sole recourse is refund of purchase price or store credit, in the discretion of seller. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details Local pickups are free and can be prearranged with contact! Combined shipping is welcomed. Please contact us ... moreif interested. Common carrier shipments: Non-bulk items under 70 pounds will generally be shipped using USPS Priority Mail® Flat Rate. Larger items that require more specialized packing will be discussed with customer following purchase of item. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know. If we will be shipping to a business: The business name The business' address Contact information· If the receiver has a way to unload the pallet/ item or if we need to arrange for a lift gate. International shipping: We can ship outside of the U.S. Payment Details We prefer PayPal as payment; sign up is easy and the payments are secure. Feedback We strive to make sure that all of our customers are 100% satisfied with their purchases. If there is anything about your transaction that does not satisfy you. Please contact us before leaving feedback. Please inform us of the issue so that we can do our best to resolve it to your satisfaction. Communication is key to a successful transaction, and we want to do our best to conduct our eBay business in a positive manner.
|
|
|
Magnum Tig Torch kit for Lincoln Electric Welder
I got this from my relatives shop and I am selling it as I found it. As I remember. This was from his Lincoln Tig Welder, but im not sure. Take a look at the photos, you will most likely know more than I do. I am selling As/Is. It reads"TSK 35-50" on the attachment end. On the torch it reads"Magnum" on one side and"LA 9" on the other. You get everything you see in the photos. I only ship inside the U.S.
|
|
|
THERMAL ARC 161STL TIG/STICK WELDER KIT Convertor
Used. Works great Comes with what you see in pictures. Converter
|
|
|
ABICOR WATER COOLED TIG WELDING TORCH KIT HW18, 20M-25-R
PART NUMBER: 20M-25-R HW18 MANUFACTURER: Albicor DESCRIPTION: Water Cooled TIG Torch Kit ALTERNATE PART NUMBERS: None CONDITION: Used DATE OF MFG: Unknown SERIAL NUMBER: None DOCUMENTATION: Manufacturer's ID Number CALIBRATION DATE: None CALIBRATION EXPIRES: None CALIBRATION BY: None APPLICABILITY: Various NOTES: There is some damage(melting) on the hoses. See pictures for part number identification. AIRWORTHINESS STATEMENT: The airworthiness of this part(s) is to be determined by the installing mechanic in accordance with the current Federal Aviation Regulations. I make no determination or claim about the airworthiness of this part(s) If this part(s) has an FAA Form 8130-3. Certificate of Conformance, pick ticket, original packaging, or other airworthiness documentation included, it will be listed as such in the description above. If ... moreyou have any questions about this part(s) feel free to contact me and I will provide whatever assistance I can. SHIPPING: Most items are shipped out same day. Payments must be received by the following cutoff times: UPS Next Day shipments- 11:00am PST- USPS Shipments- 11:00am PST- UPS Shipments(except Next Day) 4:00pm PST RETURNS: I will gladly accept returns within 14 days if the part does not meet your satisfaction. As long as it is returned undamaged, unused and unistalled with all of its original documentation and packaging. TAXES: Idaho and Washington State sales are subject to the appropriate sales taxes. Check out our eBAY store. Inland Northwest Aircraft Support! Powered by SixBit's eCommerce Solution
|
|
|
MILLER DYNASTY 200 DX AC/DC TIG / STICK W/FOOT Contractor KIT
This is A Miller Dynasty 200 DX it is used. I have welded with this machine about 8 times I am not a welder. I wanted to learn so I purchase this machine, and a new welding helmet, Arc one auto darkaning top of the line very nice! I also have the Contractor Kit with foot peddle, everything like new see photos
|
|
 |