In 
 
Order by: 
Available to: 
Price: 
 - 
$
499.99
Buy It Now
$23 Shipping
Condition: Used
Location: Milton Freewater,OR,USA
Miller Wireless Foot Control# 300724 and# 300722 Wireless Receiver 14 Pin NEW Improves productivity and maneuverability by eliminating cord tangles. Reduces ... moreclean up time and work area cord clutter Improves safety by eliminating control cord and reducing potential trip hazard. Multiple frequency sharing allows up to 20 systems to operate in a 90-ft(27.4 m) radius with accuracy and precision— and without delay. System interference, or crosstalk Auto On feature extends the battery life up to 250 hours of welding without turning the pedal on and off. Improves productivity and maneuverability by eliminating cord tangles. Reduces clean up time and work area cord clutter. Easy-to-install receiver plugs directly into the 14-pin receptacle of Miller machines. Easily programmable. The Wireless Remote Foot Control can be quickly and easily paired with any other Miller 14-pin wireless receiver. Control is preprogrammed when purchased with the receiver. The Wireless Remote Foot Control is recommended with following Miller power sources: Dynasty® 200 SD and DX Dynasty® 350 Dynasty® 700 Maxstar® 150 STL and STH* Maxstar® 200 SD. DX and LX Maxstar® 350 Maxstar® 700 Syncrowave® 250 DX Syncrowave® 350 LX ~~ These are NEW IN THE BOX Items. Only opened to find out what they were and take pics! Insurance is added to shipping price. ALWAYS READ THE SMALL PRINT* I try to provide the photos and information of the items I have up for auction as clear as possible. Please e-mail if you have any questions about this item before placing a bid. Payment is expected within 3 days of end of auction. Unless it is a buy it now auction or I accept an offer you have made, them payment is due IMMEDIATELY. I try to always ship within 3 business days of end of auction. I do combine shipping so check out my other auctions! Thanks so much for looking and have a great day! Posted with:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1404dcc4afb-0xfc-
$
159
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
25
Buy It Now
$8 Shipping
Condition: New
Location: Salina,KS,USA
$
22
Buy It Now
$0 Shipping
Condition: Used
Location: Indianapolis,IN,USA
Miller rfcs 14hd foot control. Ready to be hooked up. The cord had does have some electrical tape on it. See the pictures. PayPal only Ship in lower 48 ... morestates only Posted with
$
15.99
Buy It Now
$0 Shipping
Condition: New
Location: Santa Fe Springs,CA,USA
$
46.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
894.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
150
Buy It Now
$7 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
300
Buy It Now
$0 Shipping
Condition: Used
Location: DeKalb,IL,USA
$
259.99
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
BRAND NEW in the factory box. MILLER RFCS-RJ45 FOOT CONTROL FOR DIVERSION 165 and 180 TIG Welders. Miller Part#300432
$
410.99
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
Miller RFCS-6M Foot Amperage& Control(195183) ITEM DESCRIPTION This listing is for a brand new Miller RFCS-6M(6-pin plug) Foot Amperage Control(195183) ... moreand is designed for the Miller Maxstar 150STL/STH Series Welders. This foot control comes with a 13.25ft(4m) cord and plug. SHIPPING INFO We offer free shipping to the Continental 48 States. Alaska and Hawaii residents. Please email us prior to placing your order for a quote on shipping. We will gladly accept returns received within 14 days of delivery for a full refund. Minus our original shipping cost. Orders returned outside of the 14 day window are subject to a 20% restocking fee. Plus our original shipping cost. Returned items must be unused. In brand new condition, in original packaging. Items returned without their original packaging or in used condition are not eligible for refund or exchange and will be returned to you at your expense. ABOUT US The IOC in Welding Supplies stands for Indiana Oxygen Company. IOC has been a leader in the welding and gas industry since 1915. Making us the oldest independently owned Welding Supply Company in the county. After all these years, we're still a family owned company that is passionate about customer service and the products we sell. Our internet department was created in 2000 has been shipping products to our loyal customers across the country ever since. We like to think that we have some of the most knowledgeable customer service reps in the industry. Feel free to email or call us with questions about a product. To check the status of your order, or vent about the big game last weekend; we're here to help Monday through Friday, 8am to 6pm EST.
$
68.99
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
90.99
Buy It Now
$4.95 Shipping
Condition: New
Location: Salem,OR,USA
$
25
Buy It Now
$2.5 Shipping
Condition: New
Location: Lynnville,TN,USA
$
399.95
Buy It Now
$0 Shipping
Condition: New
Location: Brighton,CO,USA
$
40
Buy It Now
$8 Shipping
Condition: Used
Location: Waterford,WI,USA
$
329.95
Buy It Now
$0 Shipping
Condition: New
Location: Brighton,CO,USA
$
15.99
Buy It Now
$0 Shipping
Condition: New
Location: Santa Fe Springs,CA,USA
$
13.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
135
Buy It Now
$0 Shipping
Condition: New
Location: Buffalo,NY,USA
$
13.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
375.99
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
209.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
$
50
Buy It Now
$0 Shipping
Condition: New
Location: Howell,MI,USA
$
2.99
Buy It Now
$2.9 Shipping
Condition: New
Location: Salem,OR,USA
$
55
Buy It Now
$0 Shipping
Condition: New
Location: Howell,MI,USA
$
10
Buy It Now
$0 Shipping
Condition: New
Location: Howell,MI,USA
$
2,025
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
MILLER FILTAIR 130 Welding Fume Extractor 300595( Please order optional nozzle below- as nozzle is not included) The FILTAIR ™ 130 weld fume extractor ... moreis a portable. High-vacuum system ideal for contractors, MRO, light manufacturing and fabrication shops. Designed with 132 CFM and a high-efficiency cartridge filter to collect weld fume particles at the source. High Performance Filter Highest performing filter in the industry will last longer and capture the smallest submicron( Less Noise One of the quietest portable systems in the industry at 68.5 dBA at 5 ft(1.5 m) Easy To Use Adjustable airflow control allows you to change your airflow capacity for different welding applications. Portability Compact footprint with castor wheels and handle bar increase portability. Allowing operators to maneuver into small spaces or hard to reach areas. Includes 20 ft(6 m) power cord and an 8 ft(2.4 m) collection hose. Optional 17 and 34 ft(5.2 and 10.4 m) collection hoses are available. Filter Media 16 ft 2(1.49 m 2) Nominal Airflow 132 CFM(62 L/sec) Sound Level 68.5 dBA at 5 ft(1.5 m) Motor 1 HP. Input Power 115 VAC/1-Ph/60 Hz at 11 A. Weight 46 lb(92 kg) Dimensions H: 23 in(584 mm) W: 12 in(305 mm) D: 12 in(305 mm OPTIONAL ACCESSORIES_ B& R WELDER REPAIR SERVICE INC. 4412 SOUTHERN BUSINESS PARK DRIVE WHITE PLAINS. MD 20695 800-783-3073 FAX 301-934-3057 Hours: Mon-Fri 8-5 Sat 9-12 EST Email questions to: brwelder@radix.net OUR SELLING POLICIES Payment Paypal. Money orders, cashier, certified and personal checks, all major credit cards. Payment requested within 3 days of purchase.If you mail a check or money order please call us at 800-783-3073 ad let us know it is being sent. Personal Check will take 14 days to clear Fees Maryland sales tax of 6% charged on all orders shipped to or picked up in Maryland. Shipping Most items include free shipping to 48 states. Check listing for the FREE SHIPPING. Large welders require truck shipment to your door. You must get the
$
19.25
Buy It Now
$5 Shipping
Condition: New
Location: Salem,OR,USA
$
16.99
Buy It Now
$0 Shipping
Condition: New
Location: Pasadena,CA,USA
$
16.99
Buy It Now
$0 Shipping
Condition: New
Location: Whittier,CA,USA
$
25
Buy It Now
$4.6 Shipping
Condition: New
Location: Salem,OR,USA
$
889
Buy It Now
$150 Shipping
Condition: Used
Location: Petaluma,CA,USA
This listing is for a Mi ller Econotig CC AC/DC Welding Power Source T IG WELDER Purchased and Don't Believe Ever USED Sat around Shop Local Pick-Up#0423 ... moreNormal 0 MicrosoftInternetExplorer4 CHECK OUT OUR STORE FOR MORE ITEMS US 48 SHIPPING ONLY SOLD AS IS ALL SALES FINAL NO RETURNS ANY QUESTIONS: Please Message Me Bills Speed Shop 1919 Mound Rd Joliet. IL 60436 PURCHASE POLICY: Before purchasing any item(s) PLEASE READ& understand all details about item(s) We can assist you with any questions that you may have. Payments must be received within 72 hours. IF YOU BUY NOW/PURCHASE ITEM YOU ARE RESPONSIBLE TO PAY FOR THAT ITEM. PLEASE DO NOT HIT BUY NOW/PURCHASE AND NOT PAY FEEDBACK POLICY: Please allow us the opportunity to resolve/fix any problems that may occur during your experience with Bill’s Speed Supply before leaving neutral or negative feedback. All problems can be resolved in a quick and timely manner with your consideration. SHIPPING POLICY: We will combine multiple items to save you money on shipping. We are NOT liable for shipping service transit times. Transit times do vary based upon your location, once we have shipped your item(s) we are NO LONGER Responsible! Please check and view all shipping details and services in the shipping section just below the price column towards the top of the page! You can expect your item within 4-8 BUSINESS days from the time payment is received in full! We appreciate all of your business and look forward to doing more in the future. As stated earlier please allow us the opportunity to handle a problem that may occur in an orderly fashion to avoid neutral or negative feedback, though these policies come off as being blunt and to the point we just want all details to be viewed to avoid any complicated transactions that could arise, Thanks Bill
$
49.99
Buy It Now
$0 Shipping
Condition: New
Location: Kansas City,MO,USA
$
1,572.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
1,970
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
234.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village,IL,USA
$
998.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
350
Buy It Now
$0 Shipping
Condition: Used
Location: New Paris,IN,USA
$
616.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
12.59
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
115
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
185
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
SquareTrade © AP6.0 Untitled Document 25 ft. Heavy Duty 8/3 250V 50 Amp Extension Cord with Lighted ends DWC 83STBLK25 BRAND NEW 25 FOOT 50 AMP 250V ... more50 AMP- POWER EXTENSION CORD WITH SP35I PLUG AND SP65O LIGHTED RECEPTACLE. 8/3 STW CABLE WITH MOLDED ENDS. EXTRA SAFE. EXTRA LONG LASTING. SEE PICTURES ABOVE AND BELOW FOR PLUG AND RECEPTACLE CONFIGURATION-WILL WORK WITH MOST SMALL 230V WELDERS AND PLASMA CUTTERS DWC 83STBLK25 Highly flexible annealed 30 gauge bare copper conductors. Insulated with an STW water-resistant jacket. Operating temperatures range from-40C to +90C(40F to 194F) The 8 gauge, 3 conductors are rated at 250V, 50A. FREE GROUND SHIPPING TO ANY OF THE CONTINENTAL 48 STATES. PayPal: Paypal is preferred payment method. Credit Cards: Now right here in checkout. Select Credit Card Option and enter information exactly as on credit card statement and card. You may change ship to address during check-out. Call 866-854-7380, 8AM to 9PM Eastern Time(EST) 7 days a week with questions or concerns We expect payment within 3 days of purchase. We must charge sales tax as follows; Indiana(7.00% Illinois(6.25%Kentucky(6.00% Michigan(6.00%and Ohio(6.50% WE USUALLY SHIP THE NEXT BUSINESS DAY AFTER PAYMENT RECEIVED. SAME DAY IN SOME CASES. UPS SENDS TRACKING INFORMATION TO YOUR EMAIL ADDRESS USED FOR SALE. TRUCK TRACKING INFO SENT IN SPERATE EMAIL. FREE GROUND SHIPPING TO ANY OF THE CONTINENTAL 48 STATES. All items are covered by Manufacturer warranties. We will help you with any warranty issues. Small items shipped by Economy mail. With Priority mail option, or UPS,each listing shows the standard way it will ship, with options for faster shipping. unless you choose 1st or 2nd day air at additional charge. Larger welders are shipped via common carrier of our choice. We get it to your door. Additional charges for lift gates or special delivery are at your cost. Some welders are not stock items and will be ordered from manufacturer when paid for. This is stated clearly in the listings that
$
21.25
Buy It Now
$4 Shipping
Condition: New
Location: Salem,OR,USA
$
12.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
155
Buy It Now
Free Shipping
Condition: Used
Location: New Paris,IN,USA
$
10.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
375
Buy It Now
Free Shipping
Condition: Used
Location: New Paris,IN,USA
$
25
2d 11h 3m 58s
0 bids
Free Shipping
Condition: New – Open box
Location: Amherst,OH,USA
$
18.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
41.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
149.99
Buy It Now
$0 Shipping
Condition: New
Location: Pacific,MO,USA
$
16.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
25.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
178
Buy It Now
Free Shipping
Condition: New
Location: Carlsbad,CA,USA
Used in working condition Miller Heavy Duty TIG Welder Foot control RFCS-23 pedal 5 pin connector Works Payment due within 3 days of auction end. Free ... moreshipping to the lower 48states. G6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-147a4c22512-0x10a-
$
178
Buy It Now
Free Shipping
Condition: New
Location: Carlsbad,CA,USA
$
39.9
Buy It Now
$0 Shipping
Condition: New
Location: White Plains,MD,USA
$
14.99
Buy It Now
$0 Shipping
Condition: New
Location: Duluth,GA,USA
$
2,499.99
Buy It Now
$0 Shipping
Condition: New
Location: Centerville,UT,USA
$
16.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
1 2 3 4
 In 

Past Items  
 
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 SPECIAL K PRODUCTS Here at SPECIAL K PRODUCTS. Our goal is simple: PROVIDE THE HIGHEST QUALITY PRODUCT FOR THE BEST PRICE. 4) FOUR EACH EAMES HERMAN MILLER 671 OTTOMAN REPLACEMENT GLIDES. ADJUSTABLE THREADED STUD. MOLDED IN A BLACK NYLON INSERT FITS THE EAMES HERMAN MILLER 671 OTTOMAN FROM 1957 TO PRESENT THEY ARE MADE IN THE U.S. WITH U.S. MADE MATERIALS! PLEASE VISIT OUR EBAY STORE FOR OUR OTHER ITEMS. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ... moreFREE STANDARD USPS SHIPPING WITHIN THE USA PRIORITY USPS SHIPPING EXTRA WE WILL GLADLY SHIP TO OTHER COUNTRIES. INTERNATIONAL SHIPPING VIA USPS FIRST CLASS MAIL the cost is $7.00 NO TRACKING NUMBER AVAILABLE If you would like your package shipped USPS Priority International Mail the cost is $16.95 NO TRACKING NUMBER AVAILABLE IF YOU WOULD LIKE YOUR PACKAGE SENT WITH A TRACKING NUMBER PLEASE SELECT THE EXPRESS MAIL OPTION THE COST IS $38.00 Thanks for looking and be sure to Email with any additional questions. PLEASE READ BEFORE PURCHASING. Please be sure to read the entire auction before bidding and absolutely do not hesitate to ask any questions. Please be courteous and do not bid if you do not intend to purchase the item. PAYMENT. Acceptable methods of payment PayPal. Payment must be received within three days of purchase. SHIPPING AND HANDLING. We do our best to keep the shipping and handling costs as low as possible and every item is carefully packaged to ensure proper protection during transit. The buyer is responsible for all shipping and handling costs at the time of payment. Domestic items will ship as soon as payment is received. Please allow up to 4-6 weeks to rece
Neon MILLER LITE Beer Sports Baseball MLB Gold 3D Statue 1990 Light 3-Foot Sign! Very. Very rare. Features a 3D gold Baseball player catching a fly ball. Very large, over 3-feet tall. Silhouette of player sticks out at about a 9" depth. Excellent Overall Condition. On a scale of 1-10 with 10 being new. This sign is a 9 of 10. There is a small spot on the players chin& top of mit where the gold paint is chipped and a couple very light minor scratch on gold paint(see photos) Otherwise excellent shape. no cracks, tears, or missing pieces. Features a Neon"Lite Beer" Sign that detaches from the player silhouette. Neon sign is flawless. Features a cardboard backing. Neon is is metal with string to turn light on/off. Gold Player is made of very think durable plastic with gold paint.very sturdy. The date on the back is stamped ... moreApril 5th 1990. Dimensions are 38" height x 32" length x 9" width.
Welcome. Up for sale is a Scarce Duncan& Miller 12" Scalloped Collar Foot& Flared Flower bowl in the First Love Pattern in excellent condition with no chips. Cracks or repairs. Elegant in design and form this lovely flower bowl would ad charn to any decor. Measures approx. 12" in Dia. and 5" in H. Any questions please e-mail us prior to purchase. Thanks for looking. Good Luck and Good Bidding. Use our BUY NOW option for quick purchase. Payment is due within 3 days of the auction ending by PayPal unless otherwise agreed by email. Returns will be accepted if the item purchased is not as described in the listing. Feedback will be left after receiving same. Items are usually shipped out within 1 business day in most instances. All items shipped Internationally by Express Mail will be insured. We ship all items by USPS unless ... moreotherwise specified. Larger items will be shipped by UPS. Shipping overcharges if any are determined after shipment is sent and reimbursed that day through PayPal unless there is free shipping on that item. We do combine multiple shipments to save buyer on shipping costs. Per the US Post Office. USPS Priority Shipping is a 2-3 business days service and Parcel Post service is usually a 4-8 business days service inside US borders depending on your location.
Bidding on a RARE Huge Miller lite Beer Wall Clock Very Unique and Rare Swatch styled Miller lite Beer Wall Clock Seven(7) foot in lenght with a 12" face. Looks just like a watch, but gigantic. Blue with blue stripes. Whites, Big Brass colored clasp, Great Battry operated one 1.5v"AA" not included Quartz movment. NO corrosion, Works Great Red. Easy to see, hands with a black second hand Over all condition Very Good for age and use. Small scuff on face see pics,
MILLER WELDING FOOT PEDAL WORKING CONDITION
Used for for two weeks basically brand new.
aims MILLER REMOTE FOOT CONTROL- RFC-23A read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Miller Electric Manufacturing Co. of Appleton. Wis. This is a Remote Foot Control in good condition. For Dialarc 250 AC/DC. Dialarc HF, Gold Star 330 A/BP and 320 A/BP. Foot pedal provides remote current and contactor control. Includes 20 ft(6 m) cords and plug. Model# RFC-23A Specifications: Overall Dimensions: 6-1/2" x 12" x 7" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar ... morewith no reserve. MILLER REMOTE FOOT CONTROL- RFC-23A MILLER REMOTE FOOT CONTROL- RFC-23A Reliable Tool Inc. c 2011 | Powered by
I FOUND THIS AND OTHER TREE TRIMMING THINGS IN A STORAGE UNIT I SEE NO PROBLEMS WITH BOTH ITEMS LET ME KNOW IF YOU NEED MORE INFO. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13e042eb9b9-0xf7-
You are Bidding on(1) One. Used Miller Welder Foot Controller. Model# RFC-14 Fair Condition. Well worn. But still has a nice smooth action. Off of a 1985 Miller Syncromatic 300, so I think the Foot Controller is also as old. Thanks for Bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13e04c3ae79-0x100-
Miller RFC-23A Foot Welder Foot Control Pedel We purchased a large lot of Miller Foot Controls and will be listing them over the next few weeks. You will get a unit just like the ones pictures. We have no way to test them so they are sold AS IS. THey are all stock units or removed from production. YOu are buying one unit. READ BELOW BEFORE BIDDING: You are buying the above as is as. This means don't assume anything. If you have questions ask. If it’s not listed as new in the box then don't think it is. It’s sold as seen as is. Even if the unit has been tested or removed from a working machine. Payment: PAYPAL ONLY We will ship using our ups account within three days only in the USA. All other areas will ship USPS and we will ship on Saturdays only so it could be up to 6 days depending when you buy the unit. ALmost all items were removed ... morefrom a working machine but are sold as is. Feedback: We will post POS feedback withen 30 days of your purchase. If a threat of Negative. feedback is used to get something that was not listed or service not listed we will forward the request to EBAY without notice to the buyer. We offer many vibratory Feeder Services. Service on Feeding Equipment, Refurbishing, Replacement or Re-tooling, Retrofitting and new turnkey systems. We have the largest inventory of used Vibratory Feeders you will ever find. If you have any questions regarding the above units please contact us at Feeding Concepts Inc. 317-773-2040 On Jan-18-13 at 13:54:52 PST. Seller added the following information:
Hi! Up for auction today is a used but in good shape Miller foot pedal for older Miller. Sureweld and Airco tig machines. It is model RFC-23A. It is compatible with Miller 320-330 A/BP, SR-150's, and all SR- SRH power supplies. I personally went through this unit and cleaned it out and tested functions. Continuity switch works fine and instantaneously. Rheostat control measures 5-19 ohms on the upslope and 19-6 ohms on the downslope which is decent. Some very slight cracking of insulation around flexnecks of cables as they enter the enclosure. Getting hard to find these foot pedals in this shape as they are very abused. Thank you.
50+ Items Each Week ~ All Items Start at $0.99 NEVER A RESERVE! ~ Up For Bid: ~ ~* ~ Estate Fresh Edward Miller& Co. Lamp ~ Ready for a New Life Victorian E. Miller& Co Paw Foot Oil Lamp This is a Great looking Center Draft oil Lamp from the late 19th or very early 20th Century featuring Paw Feet and a mark on the Bottom by Edward Miller& Co. This old Lamp has a Nice Gold Paint Job that Displays like Bright Gold Radiator Paint. This old Beauty is ready for a Functioning Fount. Spyder& Globe and this old Lamp would be back in Service. There is a slight dent on one side as you can see in the pictures. You guys asked for more E. Miller Bases so here you go. This one is Estate Fresh and Begging to be put back in use. Measurements: 15" Tall 8 1/2" Across 8 1/2" Deep ~* ~ BID WITH CONFIDENCE ~ MONEY BACK GUARANTEE ... more~ 5 Tips for Bidding on Our Items: 1) If you have Limited or Negative feedback or a History of not paying please contact us before placing a bid so we do not remove your bids. 2) If you have won an item and would like to bid on a 2nd item that ends on another day. Please pay for the items as you go. 3) Please be Prepared to pay for your item ASAP. After 5 Business Days Ebay will automatically Open a Non-Paying Bidder Case unless you have contacted us and made prior arrangements. not common) 4) 90% of the Items that we sell are Antiques which means that they are not in 100% just out of the box" Shiny new Condition. 5) Please Read our Entire Description. ~* ~ We List 50 Ite ms Each Week. Click Here To View Our Other Auctions ~* ~ We are Out Picking the East Coast Weekly. So you don't have to! Powered by The free listing tool. List your items fast and easy and manage your active items.
Post WWII Military Foot Locker manufactured by Miller Manufacturing Company. Glen Cove, NY. Locker has metal tag on top dated 1946 and manufacturing information. There is some flaking on back of locker as noted in photo#7. There is no hasp lock or tray. The edges of the locker are trimmed in metal with bradding, corners are double protected, 3- 1 on front and 2 metal handles on each end. Metal hinges inside. Dimensions of are 31 1/4 Long by 16 1/4 wide by 13 1/4 high. Please use zoom feature to closely inspect and ask if you should have questions. Paypal payment within 3 days of close of auction.
For sale is this Miller foot pedal Model number RFC-23A Shipping will be $20.00 Thanks for looking and God Bless!
You are bidding on a good used Miller Tig Welder Remote Foot Pedal Contactor Control with separate Fixed Current Control Box. Works well! 14 pin. New foot pedal alone is over $200. Thanks for looking!
Miller XR-EDGE 15A Push Pull Goose Neck Gun. 12 Foot Long Condition: Excellent. Has some marks& scratches Does not include any accessories. Only what you see in the photos Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
Hi! Up for auction today is a used Miller foot pedal for older Miller. Sureweld and Airco tig machines. It is model RFC-23A. It is compatible with Miller 320-330 A/BP, SR-150's, and all SR- SRH power supplies. I personally went through this unit and cleaned it out and tested functions. Continuity switch works fine and instantaneously. Rheostat control measures 5-19 ohms on the upslope and 19-6 ohms on the downslope which is decent. Some cracking of insulation on cables. Cables should probably be repalce for safety, reliability sake. Thank you.
You are bidding on my extra set of used miller accessories(from a Miller Dynasty 200DX) that include TIG torch(will come as shown in photo# 2) Ground lead and HD Foot pedal for Tig Welder all in great working condition. Will sell separately if need be so make and offer for 1, 2 or for all pieces. Offers for 1 item should be specified in the offer description comments. Must sell, moving and don't need to take with me, no reasonable offer refused! f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13e6b70abe3-0x105-
I HAVE A FEW LOTS OF SAFETY GEAR-HARNESS. GLOVES, SHOCK STRAP, ETC. COMBINE AUCTIONS AND SAVE ON SHIPPING COSTS! ALL ITEMS WERE USED, BUT ARE STILL IN GOOD SHAPE AND SAFE TO USE. Here is a used Miller model 216WLS shock absorbing 6' long Manyard. This has a date of 12/2000. It is in good useable condition. Please SEE PICTURES and email me with any questions. WINNING BIDDER TO PAY FOR SHIPPING IN THE U.S. TO CALCULATE SHIPPING. PUT YOUR ZIP CODE IN THE BOX ON THE SHIPPING PAGE OF THE AUCTION PAGE. INTERNATIONAL BIDDERS: SELECT YOUR COUNTRY FROM THE LIST ON THE SHIPPING PAGE. INSURANCE: Email for details. A surcharge of $2.50 will be included for EVERY Package over $100 so that insurance can be included in the price! This is a MUST and non-negotiable! I am sick and tired of the post office damaging items and then I pay for it. Insurance ... moreis REQUIRED on ALL purchases over $100 and optional on other purchases. RETURNS/REFUNDS: 14 Day return policy. But NOT FOR BUYERS REMORSE! Ebay is forcing sellers to have a return policy or they will be punished! Buyer to pay for RETURN shipping AND INSURANCE for returns! If the package is not insured, it will be refused and sent back to you! PAYMENT METHODS: I will accept Paypal. EMAIL me for details! All my items are sold"as is" So if you have ANY questions-EMAIL ME! PLEASE CHECK OUT MY OTHER AUCTIONS COMBINE AUCTIONS AND SAVE $$$ ON SHIPPING CHARGES! Thanks and good luck.
Up for bid is a good working Miller Welding Control Welder Foot Pedal Tool Standard shipping or local pickup
Don't forget to stop by our store. The Lucky Fin of Pella, and take a moment to browse! We have everything from A to Z and more! We are listing almost everyday and never know what we might find! So swing on buy and take a virtual tour around our shelves. You might just be suprised! Miller safety harness& laynard. In great shape and ready for use. The harness is model 552 and is a universal fit with a 310 lb weight limit. It does come with the 6 foot long laynard for hooking to your safety point. It does have all the tags on it, including the unmarked safety check tag. It is in great shape with no rips, tears, or snags. It does have some spots of use on it in places, but everything is intact& solid. Shipping& Handling We typically ship 3 times a day(9am-2pm-7pm) and our mail pickups are at 10am& 3pm. Monday-Friday. We ship ... moreonce on Saturday at 9am. Normally, all purchase ship within 10 hours Monday-Friday. If you would like a different shipping option than that offered in this or any other listing, please let us know and we will send you an invoice for it before paying. Insurance on Packages We pack all shipments as well as we can. But things do break during shipping from time to time. We do put insurance on many packages that we feel are at risk of mishandling by the Post Office. If you would like to know if insurance is on your package or are interested in having insurance on your item, please let us know. International Buyers We ship all items 1st Class whenever possible to keep your shipping cost as low as we can. Please be aware. However, that 1st Class shipping can take up to 6 weeks for delivery and can be held up in customs in your country. If you have concerns about delivery time or a lost package, we will be happy to ship your item Priority if asked. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13e830333dc-0xf0-
This was a working pedal who's rheostat stopped working. Great parts pedal with working plug and cords for miller tig. This is for one pedal though it says I have 11. Thanks for looking. Posted with
This is a miller tig welding foot pedal#rfc23ag. It is in good used condition paint is worn off of top where foot goes. The rest of the pedal has normal use scratches. The cord is about 16 feet long. It was fully functional last i used it. It has been in storage for some time and i no longer have the machine to test it. If you have any questions i will do my best to answer them please check my other auctions
Miller RFCS-14HD Foot Controller. Used, Priced to Sell, MSRP $300+ This unit was used. But still works. RFCS-14 HD Foot Control: For all Miller solid-state power sources AFTER serial#JK674521-New design increases stability with a larger base and a heavy 20 ft cord that can exit the front. Back or either side of the pedal. Provides remote current and contactor control. 14-pin plug.
Miller Maxstar 200DX WeldCraft Tig Torch. With Hand Control Foot Pedal. Regulator Looking for a Dynasty 200DX Call me at 702 249 7572 We can calculate shipping or use your shipping Co. Please contact us for shipping Reserve is set at 1700.00 if the auction does not meet the Reserve the price might be up for discussion Maxstar DX- When the job demands greater control the DX provides pulse on/off. Pulse frequency, peak% time, background amps, initial amps, initial slope time, final slope time, and final amperage control. The Maxstar­® 200 DX TIG welder features Auto-Line technology. The most advanced inverter power management circuitry in the welding industry, allowing the end user to automatically connect to any input power, 120-460 volt, single- or three-phase. Built-in gas solenoid and HF means there are no additional accessories ... morerequired. With 1-200 amps of welding output the Maxstar 200 Series provides the operator with superior low-end DC TIG or high-end DC Stick performance. Weighing in at 37 lb(16.8 kg) The Maxstar 200 is built to function dependably under the most demanding conditions. Processes DC TIG(GTAW) Pulsed DC TIG(GTAW-P) Stick(SMAW) Applications Manufacturing Industrial Aerospace Petro/Chem Fabrication Mechanical Contractors Food/Beverage Industry Dairy Industry Shipboard Installation/Repair Features: DX Model: When the job demands greater control the DX provides pulse on/off. Pulse frequency, peak% time, background amps, initial amps, initial slope time, final slope time, and final amperage control. Blue Lightning™- High Frequency Arc Starter for non-contact arc initiation. More consistent arc starts compared to traditional HF arc starters. Greater reliability and no maintenace on solid state components. Preset parameters for tungsten sizes from.020- 1/8 inch provide optimized starting for applications from thick to micro thin material. For unique applications. Custom settings are programmable. Lift-Arc™ start provides TIG arc starting without use of high frequency. Portable in t
THIS IS A NICE MILLERRCFS-23 FOOT CONTROLLER GOOD CONDITION# Shipping on this item is 21.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if ... moreit is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item12 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13ea39b180f-0xf4-
THIS IS A REALLY NICE GOOD CONDITION MILLER RFCS-14HD FOOT CONTROL# Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase ... moreif it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item8. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13ea67b2142-0x106-
This Miller Mighty Lite model L65G Retracting Lifeline was purchase in 2011 and last service tested in June of 2012. It is in excellent condition and is fully operational. Please feel free to ask questions and thank you for looking. Posted with
Miller Manyard Lanyard 5' foot Nylon 216M Capacity 310 lbs
Miller Manyard Lanyard 4' foot Nylon 216M Capacity 310 lbs
Miller RFC-E remote foot control with 14 pin AMP plug. There are 5 pins used in this plug please make sure it will fit your application. This control is in great shape and works fine I have used it, no cuts or repairs on the cord. All forms of payment accepted but must clear before shipping.
Miller FL11-1/11FT MiniLite 11-Foot Fall Limiter- Red*NO RESERVE* Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Make: Miller Model: FL11-1/11FT Condition: Used/Lightly Used- This item has been used but is still in decent condition. This item will be working mechanically(if applicable) but can have some signs of wear to the exterior(Ex. Light scratches. Scuffs or marks) Auction includes: Carabiner. Manual and box. Guarantee: 30 Day satisfaction guarantee 149697.1 261 BM Order: 20235 We are only able to accept PayPal payments it's secure and offers the most protection to buyers and sellers alike. PayPal also gives you the flexibility to pay with your checking account. Debit, or credit cards. Payment is expected within 8 days. Sales tax must be collected for all Texas. Tennessee, Illinois, Washington, ... moreNevada, and Florida buyers. We are unable to accept orders from resellers. We can only ship to addresses in the contiguous US(48 states) This item will be shipped via UPS ground. Shipments will only be made to confirmed PayPal addresses. Our goal is to ship within 24 hours of PayPal receipt of payment. And we guarantee it will leave our store within 2 business days. Insurance and delivery confirmation is included for all items and is calculated into the shipping charge. Shipping time with UPS ground is generally 2-6 business days, we will email the tracking information when shipment is made. Expedited shipping is available for additional costs at the buyer's expense, so please email any special requests, and we'll try to get you a quote within 24 hours. We currently ship from multiple locations in the states of Texas, Tennessee, Illinois, Washington, Nevada, and Florida. We can sometimes combine shipping and reduce the rate if you win items from the same location. Please see the three to four digit store identifier at the bottom of the description, and email prior to auction end for a quote on reduced shipping. We will do the best to accurately describe the item in the
Ebay Listing Form- We have 1000's of Industrial/Laboratory equipment& parts items-See the categories on the left below- Miller Model 52/100 100-foot Retractable Lifeline w/ M52 Bracket FEATURES: Manufactured by Miller in the United States, Model 52/100, Serial No. 86492V, 100-foot 3/16" Galvanized Steel Cable, Appears to have been last inspected June 2011, 60.5 lbs raw weight. Roughly 14" x 12.5" x 20" raw dimensions, CONDITION: Appears to be in good working condition overall. For obvious reasons we cannot provide a warranty on this item. Sold as-is. No returns. Out of calibration less than a year but still needs to be checked out before return to service. Some use, handling and storage rash as shown You can also find more detail in the. CA Inventory# 5597 NOTES: packing& shipping is very costly. used& ... moreparts, understand item condition. you can make an offer. international is super costly& slow. combined shipping. anything electrical-more restrictions. can't schedule shipping without. delivery takes time. query& purchase response time. we make a mistake now& then. LINKS: CAVLON ITEM CATEGORIES: air compressors& parts, fans& blowers, bio energy fuel diesel components, bulk material handling, computer. Network& telecom, construction equipment& tools, electric motors, electronic parts& assemblies, generators& backup power, hardware& fasteners high voltage components, high pressure components, industrial automation components, industrial electrical components, lab& industrial ovens& furnaces, liquid pumps, machine tools, mechanical parts& assemblies, optical parts& assemblies, pneumatics, power supplies, rf radio frequency components, robotics, test and measurement equipment, ultrasonic equipment, vacuum pumps& components, valves and fittings, video components, wire. Cable& shrink tubing, Additional similar or related items may be available listed separately. This Might Be Just What You Need For Your Fall Pro
Miller Welding Supplies Auction includes Miller Welding Radiator 1A Cooling System. Torch, Foot Control model RFCS 14 HD. All are in good working condition. Shipping weight is 72 pounds or local pick-up is always welcomed. Bidding starts at 99¢& there is No Reserve price. Please ask any questions you have about this item before placing your bid. UPS shipping to lower 48. We ship Monday thru Friday. In most instances we ship within 24 hours of payment. If payment is received after 1pm(EST) on Friday we will ship on Monday. Payment must received within 3 days of auction end. Check out our other items! We will gladly combine shipping whenever possible. Returns are only accepted if an item is not as described above. You. The buyer, are responsible for the return shipping. Please let us know asap if there is any problem with the item. ... moreWe stand behind what we sell and will do whatever we can to make sure you are satisfied with your purchase. For our security, we photograph and record all serial numbers of items shipped. Please contact us through ebay messaging. We try to respond within 24 hours of your question during normal business hours M-F. We do not offer partial refunds. Please contact me if there is a problem. Before leaving feedback. Most problems can be resolved. We pride ourselves on customer service and your complete satisfaction. Great customer service is the foundation of my business. Thank you and happy bidding! a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13ec8338ee8-0xf7-
You're bidding on a Miller RFCS-14 HD foot control for miller TIG welders. Came from a Dynasty 200DX welder but this is a common foot control for most Miller TIG welders. Check to make sure it will work on your welder. Auction is for pedal/foot control only! Leads available for additional cost.
MILLER SYNCROWAVE 300 PACKAGE AC/DC ARC WELDING POWER SOURCE w/ MILLER 1A COOLING SYSTEM AND FOOT CONTROL MANY PROGRAM OPTIONS INSTALLED INCLUDING PULSER BOARD MSRP$941 ALONE THIS UNIT JUST CAME IN FROM LAS VEGAS IT IS THE CLEANEST 300 I HAVE SEEN. THE INSIDES ARE IMMACULATE AND UNIT SEEMS TO HAVE BEEN BARELY USED IT HAS ALL THE BELLS AND WHISTLES INCLUDING THE PULSER BOARD AND SPOT TIMER UNIT HAS PROPERTY OF U.S. GOVERNMENT ON IT.WHICH USUALLY MEANS IT WAS USED ONCE AND STORED IF YOU LIKE SYNCROWAVES THIS PACKAGE IS IN GREAT CONDITION AND HAS THE EXTRAS, GREAT SHOP ADDITION WILL WELD ANY METAL OR METAL ALLOY FERROUS OR NON FERROUS call or text Jeremiah 310 293 0615 Description DO YOUR FORUM RESEARCH THIS IS A HIGHLY PRIZED AND SMOOTH AC/DC TIG MACHINE THAT IS UP THERE WITH AND IN MOST AREAS SURPASSES ANY OF THE INVERTER IT FEATURES SQUARE ... moreWAVE TECHNOLOGY FOR CLEAN STACKED ALUMINUM WELDS UNIT IS IN GREAT WORKING CONDITION SINGLE PHASE UNIT THAT WILL PROVIDE YEARS OF SERVICE AS IT IS TRANSFORMER TYPE MACHINE AND EASIER TO MAINTAIN Made in the U.S.A. by Miller Electric Manufacturing Co. of Appleton. Wis. This is a used AC/DC Gas Tungsten-Arc or Shielded Metal Arc Welding Power Source/ Arc Welder in working condition. Model# Syncrowave 300 Features: Master Craftsman's Choice- Syncrowave 300 provides a stable low-end output for intricate applications and the capability to ensure you have enough power for those heavy demands. MILLER COOLANT System. Miller Foot Pedal. TORCH STAND TEXT FOR PHOTOS I HAVE LARGE GAS BOTTLES AVAILABLE FOR SALE $200 EMPTY $290 FULL I HAVE OTHER WELDERS AND WELDING EQUIPMENT CALL OR TEXT applications: Precision Metal Fabrication. Maintenance and Repair. Light Manufacturing. Heavy Manufacturing. Aerospace. Shipbuilding. Tube and Pipe. Vocational. Specifications: Input: Voltage: 230/ 460 Volts Amperes: 205/ 101 Amps Kilowatts: 27 kW K.V.A. 47 Hz: 60 Phase: 1 Output: Voltage: 40 Volts Amperes: 500 Duty Cycle: 60% Maximum O.C.V. 80 Welding Range AC/DC: 5 to 375 amps General: Overall Dim
This part was removed from a working Wasino Miller Chucker. In good working condition.
THIS IS A WORKING MILLER DYNASTY 350 GOOD CONDITION# Shipping on this item is 350.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if it is ... morea item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item.
Miller RFC14 Foot Welder Foot Control Pedal THIS IS IN EXCELLENT USED CONDITION. IT'S SEEN VERY LITTLE USE AND ITS GUARANTEED IN GOOD WORKING CONDITION. HEAVY DUTY ALL METAL UNIT. NO PLASTIC. ALL OFFERS CONSIDERED. PLEASE FEEL FREE TO CALL WITH ANY QUESTIONS(860) 348-5639 JOE_ PAYMENT DURING THE CHECKOUT PROCESS YOU'LL BE ABLE TO PAY WITH A CREDIT OR DEBIT CARD WE'LL ALSO ACCEPT: PAY WITH A BANK ACCOUNT OR CREDIT/DEBIT CARD) MONEYBOOKERS/SKRILL(PAY WITH A BANK ACCOUNT OR CREDIT/DEBIT CARD) EBAY DOES ALLOWS PAYMENT BY CHECK FOR SOME TRANSACTIONS. WARRANTY WE GUARANTEE the item you purchase is in the condition advertised as reasonably described above. WE STAND BY EVERYTHING WE SELL and will do all we can to make sure you're fully satisfied with your purchase. Any discrepancies or defects should be reported to us promptly.
NO RESERVE THIS auction for 1-PC used: MILLER TIG WELDING FOOT CONTROL/SWITCH UNIT. MODEL; GUESSING RFC 23 ARB. Not sure of the model, but looks like a miller emblem on it, pedal feels fine, cord OK, plugs on the end are twist lock 3-prong, it's labelled doesn't works but has been crossed out, this is sold as-is(unknown condition) I did take one of these apart a year ago and they seem to be built like a sewing machine control pedal, if you want to take a chance or repair. used condition. Shipping $16 priority(large priority box) You Get What You See! Postal money orders& company checks always welcome! Local pick-ups are always welcome(no charge) The following is some very informative radio links: http:www.soundwaves2000.com/radio%5Fliberty/ http:www.republicbroadcasting.org/index.php?cmd=listenlive, http:www.gcnlive.com/Listen_Live.html ... moreBecause you can handle the truth! May be soiled/dings from storage. Be sure to add me to your favorites list! I normal ship within 1 day upon receiving payment by Friday 9 am Central time(after 9am item ships following Mon. No shipping on Sat. I use USPS parcel post. But when an item fits a Priority Flat rate box($12.00) I use that to save you money if its less than parcel post! I use the last four(4) digits of the ebay number. And title for my reference. Returns are welcome if not as described!
Good used tested miller electric RCA-14 remote foot pedal Posted with
Offered For Sale Today- YOU ARE BIDDING ON THE FOLLOWING HERMAN MILLER FURNITURE: HERMAN MILLER PARTITIONS WORK STATION FURNITURE FROM OFFICE ENVIRONMENT. AS FOLLOWS: FOUR HM PARTITIONS STANDARD FOUR FOOT WIDE BY 53" HIGH BEIGE FOUR PARTITIONS STANDARD FOUR FOOT WIDE BY FIVE FOOT HIGH ROSE THREE PARTITIONS 24" BY 36" HIGH ONE PARTITION 18" BY 36" HIGH THESE ARE A TOTAL OF ELEVEN(11) AND I HAVE THEM MARKED AS LOCAL PICKUP. ALTHOUGH. I WILL BE HAPPY TO DELIVER THOSE TO YOU IF YOU ARE WITHIN ABOUT 80-90 MILES OR SO. THESE HERMAN MILLER PARTITIONS ARE GENERALLY 10 FOR $2500.00 SO DON'T MISS YOUR CHANCE TO PICK THESE UP FAIRLY CHEAPLY AND TO SAVE A BUNCH OF CASH. THE PARTITIONS ARE IN ALMOST NEW CONDITION. BEST OF LUCK ON THE AUCTION FEEL FREE TO MAKE AN OFFER ON ALL OR PART.
Up for sale is a used and in great working condition. Arc Zone Foot Pedal Controller(MFC-14) I’m selling it because I have 2 of them and I don’t weld as mush as I used too. As you can see from the pictures this foot pedal has a cut on the 20+ foot cord but none of the inner wires are cut. This is made out of heavy-duty metal. Not plastic. I just tested it so I know it works. You can download the parts list here: http:www.arc-zone.com/pdf/hot_foot_literature.pdf. Or just send me a eBay message and include your email address and I’ll send you a PDF copy. As always. All sales are final, no retunes. Item will ship as soon as payment clears. For both of our safety, insurance and packaging already included in the starting bit. If you have any questions please fill free to ask. Thank you and good luck.
♥Vintage Eames Era Foot Stool Ottoman ♥ For your bidding pleasure is an awesome vintage mid century modern vinyl and teak leg footstool/ottoman. No noticeable flaws to be found. Measures 17 3/4" x 13" top) and legs measure 14" long. Most all of my auctions are vintage estate finds and therefore their condition is consistent with their age. Every effort is made to accurately describe items including flaws or wear due to age. I try my very best to give an accurate description of each item and clear photos. Therefore. My items are sold in"as is" condition. PLEASE only place your bid once you have read and understand the following terms of our auction: United States shipping and handling for this item will be determined by your zip code(Unless FREE SHIPPING is indicated otherwise in the auction) Please use the E-bay shipping ... morecalculator provided. ALL packages are sent with delivery confirmation! NEVER A HANDLING CHARGE! Please use the E-bay Checkout with all your pertinent information within 24 HOURS of auction close. Payment is due within THREE(3) days of auction close. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f4046b658-0xfe-
Used Miller RFC-14 foot pedal in good working condition. No nicks in the cord. Cord cap is not cracked. I just adjusted the pedal with my ohm meter. It works great with my Miller syncrowave 350. I don't know what other models it is compatible with. Light surface rust could be brushed off. No surprises when opened up to adjust.
STOCK NO. 043 554 STYLE: LB-16 SHIPPING PRICE VARIES. WE DID NOT PERSONALLY PUT UP SHIPPTING PRICE IT WAS DONE AUTOMATICALLY, PLEASE KEEP IN MIND SHIPPING MAY ACTUALLY COST MORE THAN LISTED DUE TO THE WEIGHT AND DIMENSIONS OF THIS ITEM AND THE LOCATION IT IS GOING TO. BEFORE PURCHASING PLEASE SEND YOUR SHIPPING INFORMATION TO FIND OUT SHIPPING COST.
To All my Fantastic Customers. Thank you! 19.5 inch diameter stool with metal legs Great vintage condition. Has a couple of very small holes on top- see photos based on pen tip for size some rust on legs will ship either usps or ups ground with great care
Good used tested miller electric ke-14 Foot pedal with 14 pump connector Posted with
MILLER SAFETY HARNESS MODEL# 216WLS SMALL 6 FOOT AS SHOWN IN PHOTO(S) LOC- 1029.
Miller TIG Welding Foot Pedal. Model: RFCS-14, Stock#043 554, Style#LD-40 Condition: Good. Exterior marks, scratches, stains No torches. Cables, connectors, or any other accessories included, just the just what you see in the photos Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
Miller RFCS-14HD Foot Control Pedal Just Serviced and is in perfect working condition. Tested on my dynasty. I have this as an extra pedal so it's up for sale. Posted with
Foot pedal came off of a Syncrowave 350. Excellent working condition. 20 to 25 foot cable attached.
Miller Syncrowave 300 Package AC/DC Welder w/Cooler& Foot Control- SOLD AS SEEN IN PICTURES! Unit is very clean! Looks new! The insides are immaculate and it seems to have barely used. Made in the U.S.A. by Miller Electric Manufacturing Co. of Appleton. Wis. This is a used AC/DC Gas Tungsten-Arc or Shielded Metal Arc Welding Power Source/ Arc Welder in. Model# Syncrowave 300 applications: Precision Metal Fabrication. Maintenance and Repair. Light Manufacturing. Heavy Manufacturing. Aerospace. Shipbuilding. Tube and Pipe. Vocational. Specifications: Input: Voltage: 230/ 460 Volts Amperes: 205/ 101 Amps Kilowatts: 27 kW K.V.A. 47 Hz: 60 Phase: 1 Output: Voltage: 40 Volts Amperes: 500 Duty Cycle: 60% Maximum O.C.V. 80 Welding Range AC/DC: 5 to 375 amps General: Overall Dimensions: 58" x 27" x 67" tall ubidonline Item Number: ... more0 613-48 AR You are bidding on( 1) Miller Syncrowave 300. We make every effort to communicate all of the details to make an informed decision. However, verification and perceived value may vary. If a condition or features are provided, they are ONLY done so as a COURTESY. You as a buyer are expected to know what you are purchasing and understand that all items are sold“as is, where is, with all faults” The more informed you are, the better your purchase decision. Since your needs are unique to you, your evaluations will be different from others. This item was purchased for resale and was NOT used by seller. This item can be previewed and inspected by appointment only at our location in Chatsworth. CA. If you have any questions, please call us at(818) 734-9043. Please ask ALL questions prior to bidding! Since I am not a dealer. This units is sold"As-Is" with"No Warranties" and"All Sales are Final" You may pay by personal/ company check. Cashier's check, or Pay Pal. Note: Merchandise will be held until funds clear. Buyer is responsible for ALL shipping& handling fees. Shipping Information: Pick-up location: Chatsworth. CA 91311 CUSTOMER PICK
Close Please view the listing for all the pictures and details Miller Safety Line 50-foot 5/8-Inch Rope 300L/50 Nylon Jakemart* 100% satisfaction guaranteed* Jakemart Description Miller Safety Line 50-foot 5/8-Inch Rope 300L/50 Nylon. Material: Metal. Color: Blue. Click Photos for Larger Image Miller Safety Line 50-foot 5/8-Inch Rope 300L/50 Nylon Tested and Inspected By: david69 Tested* inspected* sealed and/or packaged for shipping as described and noted in this listing. Batch: 041513 Item SKU: 041613-110c* Local Listing: No Item Condition: Used* Very Good Product Source: Estate Sale The Cloud Market We are located in Bellingham. Washington. All items are available for pickup at our location Save on Shipping! Pick up at our location after purchasing on this site Jakemart 1308 Cornwall Ave Bellingham. WA 98225 ITEM PERFORMANCE AND CONDITION ... moreDETAILS: 1(low) to 10(high) Item Condition: Used* Very Good Factory Packaging: No Est Year Made: 2000-2009 Factory Package Condition: 0 Package Notes: No Box Item Physical Appearance: 7 Physical Appearance Notes: Minor Use of the item Item Actual Operation: 10 Operation Notes: None Complete Item(All the Parts) 10 Complete Item Notes: None Note: A stock picture may be used for the opening picture. We always provide actual pictures. Additional Product Details Miller Safety Line 50-foot 5/8-Inch Rope 300L/50 Nylon. Material: Metal. Color: Blue. Please note the item dimensions may be of the actual item or of the box/package the item is in. Jakemart utilizes these dimensions to determine the estimated shipping size and weight. Item Dimension#1: 13in* Item Dimension#2: 12in* Item Dimension#3: 5in, Item Weight: 4.94lbs, Shipping Details Estimated Shipping Dimensions Length(Inches) 16, Width(Inches) 14, Height(Inches) 7, Total Length/Girth: 58, Pounds per Cubic Foot: 5.51, Estimated Calculated Shipping Weight Domestic Due to Actual Item Size& Weight pounds: 5* ounces: 15, Estimated Shipping Weight International pounds: 6* ounces: 3, Payment* Shippin
Miller Pfl-4/9Ft Scorpion 9-Foot Personal Fall Limiter& Guardian construction tux Vest L Large- Both items in good shape" Powered by The free listing tool. List your items fast and easy and manage your active items.
I am selling my Miller Dynasty 200 DX AC/DC TIG welder with the Foot Control Contractor Kit Pkg(air cooled) I purchased this welder roughly 6 years ago new at Atlas welding supply in Berkeley CA. The Serial No. LH011462L indicates it was made before 2008 and they have made a couple of changes to the model. I have only used it a couple of times at home totaling 1 hour and 26 minutes with 234 arc strikes. These are recorded in the machines hour meter. It worked perfectly when last used. The machine looks as new and most components are in nearly new condition. Includes all that is in the photos- I believe everything in the miller kit is there but will not promise anything other than what is in the photos. I may amend this but I do not currently have the manuals to send with it. I moved and they are filed somewhere. The manuals are readily available ... moreto download from Miller This is a very nice welder. This Please contact me with any questions before buying.
Up for sale is a used Heavy Duty Profax MFC-14 Foot Amperage Control 25' Miller 14 Pin Plug w/Manual. Fits Miller Tig Welders with 14 pin receptacles. The cable has had a repair done to it at some point. See picture.
I got this item at an estate sale with some other tools. There was no documentation provided but I used the information on the device itself for checking the safety features were in working order as follows: I hung the Mighty Lite from a hook mounted in my basement. Checked the retraction by pulling out a 4-10' length of the lifeline and allowing it to retract itself several times. Checked the braking action by pulling a length of the lifeline out then giving it a sharp pull and it immediately locked the lifeline. I did this test several times a various lengths. The Mighty Lite overall condition looks very good with some scratches here and there I would expect to find on a device of this type. The webbing of the 1" X 3/32" Polyester Webbing lifeline looks very good with no cuts or fraying visible. The unit is marked with the ... moremanufacture date of January 2000 on the label on the side panel. Other information on the label: Max Arresting Force 900 lbs Max Arresting Distance 3 feet 6 inches Max capacity 310 lbs* Please check the information above to verify the Arresting Force/Distance as well as your body weight(Max capacity) will fit your needs for this device* Pictures are of the actual Mighty Lite you will receive. Buying as is. Please see pictures and email with questions. Please Note* This item comes with FREE priority shipping and insurance. PayPal only. Please pay within 3 Days of your winning bid. Please email me with any questions/concerns BEFORE bidding. Sorry No International sales/shipping. Thanks for looking and have fun!
This is a used Miller Titan Safety Lanyard for high work Harness. This is used but in my opinion in good condition with only a little rust on the harness coupling. See pictures for details. Measures 5 feet long. I make no clams about its safety condition. Sold as is. This should be inspected by a licensed harness inspector before use. See my other auctions for more lanyards and safety harnesses. I will combine shipping on multiple items. Winner must make contact with in 3 days of the end of the auction and make payment within 7 days. I accept Paypal or M-Order/CasheersCheck. Thanks for looking. Check out my other auctions.
Miller wireless foot pedal in great shape sold the welder with original foot pedal and buy did not want to pay extra for it Posted with
Used Miller Diversion 165 in good overall condition with foot pedal remote. Machine has normal wear from being used. Has never been abused and welds as good as new. Comes with all the accessories pictured. Free local pickup can be arranged. See shipping calculator for shipping rate.
Up for sale is a Cameron Miller Electro Surgical Generator Model 80-1983 with Foot Pedal. Comes from university surplus. Unit does power up. But I will sell it as parts as I don't know if it functions as it should. See all pics and bid accordingly. Any questions call 662-550-5217 or email us. Payment DUE WITHIN 48 HOURS AFTER AUCTION CLOSING. PLEASE READ: Items will be shipped within 5 days after payment has been made. Go by OUR DESCRIPTION ONLY Not Ebay's We're the ones selling it. Ebay is bidding site with a certain risk! Our Items come from Government surplus. Estate sales, Bankruptcy auctions, IRS auctions,or university surplus. You are buying as if YOU went to an auction yourself and bought it yourself. As they announce at all auctions. All items sold as is where is with no warranties expressed or implied. Ebay doesn't ... morehave a category description for untested. So if I state untested. Go by that description only. Most Items are dirty. Items will need to be cleaned. I don't clean or refurbish items. Accessories such as remote controls. Batteries, cables or paperwork may or may not be included and if it is not in the pictures or mentioned in the listing, it's just not there! A lot of items will have stickers or sticker residue on them. To take them off use some goof off or other solvent. All of our merchandise is sold As-Is. Contact me if you have any issues before leaving negative feedback. It is important that all bidders understand what they are bidding on and feel confident. Of course we can't possibly do it right for EVERYONE.we're trying really hard! So- one more time: all of Ebay auctions pose a degree of RISK for buyers and is not for every bidder. The pricing on the auction site is reflective of the risk a buyer takes and as it is in auctions: everything is sold as-is.you buy it- you own it"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are
Miller Climbing Belt. Carabiner,Tree Climbing Gear, 37 Foot of Ropes, Large Carabiner. Lot 13 LARGE CARABINER 45KN. KH 400, 28kn, 4 rolled ropes Diamond brand POLY what you see is what you will get. thank you for looking. PLEASE CHECK OUT MY OTHER LISTINGS FOR COOL STUFF.
I bought it new. Used maybe half spool of wire, leaving the rest in there(aluminum 4043) Its the 15A(only difference from the 30A is less cable) but it has 25 foot extension to make it a 40. I bought the extension used but it looks excellent and I used it with no problems) On Jul-10-13 at 16:24:26 PDT. Seller added the following information: I'm selling because I bought a pulse welder that's going to use a different setup
Up for sale is a nice used Miller RFCS-14 TIG welder foot control pedal. It is in good working condition. TERMS: Payment is to be received within 7 days of auction end. Please email any questions before bidding. All sales are final. Payment via PayPal or contact buyer to arrange alternate payment method. Buyer pays actual shipping(see shipping calculator) Illinois residents will be charged 7% sales tax. We will only ship to the continental US.
Used for a few hours Miller Dynasty 200SD $2950 I have used these machines for years and they are the best. Im selling this extra welder since its not being used enough. Put whatever plug you want on the end. even works on 120v 30amp if your in a pitch or just have something simple to weld. I use the 3phase 220c 4pin plug to get the most power out of the machine. Comes with the ALL-IN-ONE Air-cooled TIG Accessory Kit for your solid state Miller TIG welder. Kit includes: Protective Case with carrying handle, WP1725R(25 ft) TIG torch, RFCS-14 HD foot control, International Style Torch Adapters, Smith Regulator/Flowmeter, 200A Electrode Holder with 15 ft cable, 300A Work Clamp with 15 ft cable, 12 ft Gas Hose, AK-2 Torch accessory kit, Gas hose coupler The Dynasty 200 SD im selling is a serial numbered unit starting with MC0 meaning it was built ... morelast year 2012 which is the latest and newest unit from Miller it looks(chart in images with serial number) Has the standard 4 year warranty. If you ever have a problem your local miller repair center will fix it no questions asked because the serial number is within the warranty period. Can give you receipt if anything happens just contact me. Thanks and let me know if you have any questions. Ill ship in 2 days or basically Monday. Fedex insured. 48states $67 two boxes. Ask me any questions if your serious about buying.
Restored 6 foot round Walnut Herman Miller conference table. This is an early piece lovingly restored. I cleaned up and sprayed the surface with three coats of water based clear coat and installed new Herman Miller factory"T" moulding around the edge. I am a furniture designer and builder and retained the original integrity of the piece. pick up in Chicago or delivery in Chicago area for $75.00. Posted with
Miller Spot Welder w/ Foot Lever Model MPS 10 FT Serial# S406587 230 Volt 45 Amp 10 KVA@ 50% Duty Cycle Came from a running factory. Any questions please email or feel free to call Delaney's Surplus at 608-643-8009 If buying and needs freight please email your zip code and if it is a business with a dock. Closed Tuesdays and Wednesdays.
CUSTOM MILLER DIVERSION165 AC/DC TIG WELDER THIS UNIT HAS BEED MODED TO THE QUICK DISCONNECT TORCH AND GROUND FOR BETTER STORAGE. TRANSPORT TO AND FROM THE JOB TORCHS CAN BE CHANGED FROM A#9 TO#17 TO#26 BY JUST PLUGGING THEM IN. IT COMES WITH A TORCH(9 OR#17) YOUR CHOICE. ARGON FLOW GAUGE, GROUND CABLE AND CLAMP AND A(TOP OF THE LINE) SSC FOOT PEDAL" It's as easy as"1. 2, 3" to set your machine and start welding! 1. Power-up 2. Select material type 3. Set material thickness range. Whether it's in the shop. Garage or at the race track, at 50 lbs it can be taken anywhere. Our Fan-On-Demand ™ cooling system only operates when needed. This cuts down on fan noise and reduces power consumption and contaminants drawn into the machine. The full amperage range is available from 10-165 amps on both DC and AC output. By utilizing ... morean inverter-based AC/DC power source. A more efficient(less energy is used) and consistent welding arc are provided compared to older transformer based TIG machines. Provides HF. Non-contact arc starting to eliminate tungsten and material contamination time after time. Our Auto-Postflow feature optimizes postflow time based on welding amperage. This allows for proper shielding of both the weld end zone and electrode every time without waste of gas or need for adjustment. I STAND BEHIND THE ITEMS I SELL WITH PRIDE AS A HARD WORKING AMERICAN PLEASE LEAVE POSITIVE 5 STAR FEEDBACK I WORK VERY HARD TO KEEP MY FEEDBACK RATING PLEASE CONTACT ME IF THERE IS A PROBLEM BEFORE LEAVEING FEEDBACK. THANK YOU, To learn more about this and other items I have for sale on ebay or for customer service go to georgesplasmacuttershop.com
Paypal. Visa, Mastercard, American Express. We would like this transaction to be a great one for you so please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Miller Welding Control Foot Pedal Contactor ... moreDESCRIPTION: ~ Up for bid is a good working Miller welding control foot pedal. gsrx_vers_486(GS 6.5.1(486)
Miller PFL-2-Z7/9FT Scorpion 9-Foot Personal Fall Limiter with 10/22/07 DATE Click Photos to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description Miller PFL-2-Z7/9FT Scorpion 9-Foot Personal Fall Limiter with 10/22/07 DATE PLEASE SEE PICTURES OF ACTUAL ITEM CONDITION ONE SRL PER ORDER For other great deals on Construction Surplus items, Please check out our store! Our customers are our top priority; If you are not completely satisfied with your purchase or you feel like we deserve less than a 5 star rating. Please call us before leaving feedback. We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. We do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we ... moreobserve as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. We offer a 14 day money back or exchange– buyer pays return freight* Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be answered as promptly as possible during business hours. However, please f eel free to call us at 1-800-800-6011. We are ope
Miller RFCS-14 Foot pedal. Used but very good condition includes cable w/ connector. Thanks for looking
This is a used MILLER foot pedal for a Miller TIG welder. The model number is RFCS-14. It is in good cosmetic condition but I have no way to test it I'm afraid(I'll guarantee that it works) Please see pics for condition and what it is included. Don't miss it as I'm including FREE Priority Mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and ... moreUPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1405b91c06e-0x105-
Miller Syncrowave 300 Package TIG AC/DC Welder w/Cooler& Foot Control- SOLD AS SEEN IN PICTURES! Unit is very clean! Looks new! The insides are immaculate and it seems to have barely used. Made in the U.S.A. by Miller Electric Manufacturing Co. of Appleton. Wis. This is a used AC/DC Gas Tungsten-Arc or Shielded Metal Arc Welding Power Source/ Arc Welder in. Model# Syncrowave 300 applications: Precision Metal Fabrication. Maintenance and Repair. Light Manufacturing. Heavy Manufacturing. Aerospace. Shipbuilding. Tube and Pipe. Vocational. Specifications: Input: Voltage: 230/ 460 Volts Amperes: 205/ 101 Amps Kilowatts: 27 kW K.V.A. 47 Hz: 60 Phase: 1 Output: Voltage: 40 Volts Amperes: 500 Duty Cycle: 60% Maximum O.C.V. 80 Welding Range AC/DC: 5 to 375 amps General: Overall Dimensions: 58" x 27" x 67" tall ubidonline Item Number: ... more0 613-48 AR You are bidding on( 1) Miller Syncrowave 300. We make every effort to communicate all of the details to make an informed decision. However, verification and perceived value may vary. If a condition or features are provided, they are ONLY done so as a COURTESY. You as a buyer are expected to know what you are purchasing and understand that all items are sold“as is, where is, with all faults” The more informed you are, the better your purchase decision. Since your needs are unique to you, your evaluations will be different from others. This item was purchased for resale and was NOT used by seller. This item can be previewed and inspected by appointment only at our location in Chatsworth. CA. If you have any questions, please call us at(818) 734-9043. Please ask ALL questions prior to bidding! Since I am not a dealer. This units is sold"As-Is" with"No Warranties" and"All Sales are Final" You may pay by personal/ company check. Cashier's check, or Pay Pal. Note: Merchandise will be held until funds clear. Buyer is responsible for ALL shipping& handling fees. Shipping Information: Pick-up location: Chatsworth. CA 91311 CUSTOMER
Good condition and works perfect. This the HD version that comes in the contractors kit. I upgraded to the wireless pedal and dont need this anymore. This will fit Miller Syncrowave. Dynasty and other tig welders. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14126f56097-0x102-
Up for auction is a good used Miller Tig foot pedal. The part number is RFCS-14HD. The foot pedal had been in use till cord got cut, just needs new end put on and will be a great pedal. Do not need pedal anymore selling welding machine in another auction.
You are looking at one used MIller Electric cord connected foot amperage control pedal. There are two part numbers on the back of it. RFC-14 and 129 339. I do know that about 3 years ago the controller worked before the machine broke. Not much else I can say about this item. What you see is what you will be getting. This item is being sold as-is with no returns. Buyer pays all shiopping cost. Please ask any and all questions prior to bidding. Check out my other auctions for a TIG water cooler and TIG torch. Thanks for looking and good luck bidding. On Sep-16-13 at 19:43:51 PDT. Seller added the following information: Update. I just realized I will not be available for questions from this friday till sunday evening.
Lot of Miller Welding Equipment Miller Spoolmatic 30a Air Cooled Spool Gun Includes about 30' of leads with zip on canvas cover Miller Spoolmatic 3 Welding Gun Includes about 30' of leads Miller PSA-2 Control Victor Medalist HRF-1480-580 Regulator Box of various accessories 3 carry cases All items appear to be in good condition Scroll down for more pictures Stop by and check them out 2336 Fairfield Ave Bridgeport Ct Only an hour from NYC src="http:i942.photobucket.com/albums/ad266/bridgeportpawn/Joe%20Ebay%2010/Joe%20Ebay%2010040/IMG_4037_zpsad0f5884.jpg" border="0" alt=" photo IMG_4037_zpsad0f5884.jpg"
USED. BUT PROBABLY NEVER USED, LOOKS LIKE NEW, 14 DAYS MONEY BACK WARRANTY, FREE SHIPPING
THIS LISTING IS FOR A MILLER MPS10FT WATER COOLED FOOT OPERATED TIMMER CONTROLED SPOT WELDER. THIS WELDER CAME FROM A LOCAL HIGH SCHOOL SHOP CLASS. IT WAS USED FOR THE"METAL BOX PROJECT" BY STUDENTS. THE WATER CONNECTION WAS DIRECT TO CITY WATER. AND THE RETURN SIMPLY RAN ON THE FLOOR TO A DRAIN. FOR THAT REASON THERE IS SOME RUST AROUND THE BASE. WE HAVE TESTED THIS UNIT AND EVERYTHING, TIMMER AND CONTROLS WORK. WE REPLACED TWO LEAKING O-RINGS IN THE WATER CONNECTION TO THE TONGS. YES THE TONGS ARE 18" AND IN SERVICABLE CONDITION. AN O&M PARTS MANUAL IN INCLUDED. THIS MACHINE HAS 230V 1Ph CONNECTIONS. THE PLUG IS NOT INCLUDED, AS THIS WAS WIRED DIRECT TO A WALL MOUNTED DISCONNECT. THIS LISTING IS FOR LOCAL PICK-UP. IF YOU REQUIRE SHIPPING. WE CAN BOLT THIS UNIT TO A PALLET AND STRECH WRAP, FOR AN ADDITIONAL $35.00, AND ... moreMEET YOUR LTL TRUCKING CO. YOU WILL HAVE TO PAY ALL SHIPPING COSTS. TRY FREIGHTCENTER DOTCOM OR EBAY FREIGHT. IF YOU PICK-UP OR WE SHIP TO A COLORADO ADDRESS. WE MUST COLLECT 3.9% COLO. STATE SALES TAX. SHIPPING OUTSIDE OF COLO. WILL NOT BE TAXED. SHIPPING INFO: FROM 80477 WITH A DOCK 240# SHIP WEIGHT ON PALLET 24X36X48H
STORAGE UNIT FIND. LET ME KNOW IF YOU NEED MORE INFO.
Description: Miller 122973 25 ft Extension cord For 14-pin remote contactor and voltage controls/ 24 VAC wire feeders. Provides 14-pin. 24 VAC, plug to a 14-pin socket. New part number is 242208025 Not for XR-M. Optima, or 60M series feeders(not all pins installed in plugs) Condition: Used but in good condition Ask any questions you may have Included: Extension cord as pictured Shipping: 10.50 to lower 48 Actual cost anywhere else Payment: Cash at pickup if local. Or Pay-Pal Payment must be received within 4 days Powered by The free listing tool. List your items fast and easy and manage your active items.
Description For sale is an excellent Miller RFCS-14 HD foot pedal. This came out of a company that closed. It appears to have been used very little. The paint on the bottom is barely even scratched let alone worn off from use. See pics below. PLEASE SCROLL DOWN TO SEE LARGE DETAILED PICTURES* Our pictures are part of the description. Please examine them carefully. You get exactly what is pictured. See pics for details. We sell an assortment of items that are both new and used. We do our best to describe the item accurately. But please use the pictures as your final decision maker on whether you want the item or not. We are not experts in all areas. If you have questions, please contact us. Many of our used items come from estates. We do realize that with many antiques and vintage items. Condition is everything. However, we typically do not ... moredo too much cleaning of these items as we know that with certain items, if they are not cleaned properly, it diminishes the value. We leave the cleaning up to the new owner. Contact US: If you have any questions before or after winning the auction. Please do not hesitate to contact us. Our office hours are Monday to Friday 8am-6pm CST. We are off during the weekends and all major holidays. All emails and shipments will be processed within 2 business days. If you are not satisfied with the purchase. Remember to contact us before you leave a feedback. Leaving feedback means you have already graded this transaction. And it will not help to bring it closer to resolution. We like good feedback, so we work to the best of our ability to"get things right. Before leaving a negative feedback, contact us first. for more great items! Payment Payment Method: We will accept PayPal payments. Credit card payments through PayPal only. Buyer must use checkout to get the total and choice of payment method after the auction ends. Payment must be received within 3 days(from the auction ended date) or non-paying dispute will be filed to your account. If you need more time. Please contact us
Hello bidders and welcome. Today. You will be bidding on a Miller RFCS-14 HD Foot Control Stock No. 194744(Style No. MB-20) Posted below are some features we found on a website. We are a pawn shop and every item we list came out of our store. As such. It is used and we list it that way. If you have any questions, please feel free to contact us using the information at the bottom of this page. Thank you and Happy Bidding. For Condition of the item(s) Please refer to the condition box above marked"Sellers Notes" Thank you! FEATURES: The Miller RFCS-14 HD heavy-duty foot control is compatible with all Miller solid-state power sources equipped with a 14-pin receptacle AFTER serial#JK674521. New design increases stability with a larger base and a heavy 20 ft cord that can exit the front. Back or either side of the pedal. EVERY ITEM YOU ... moreSEE POSTED IN THE PICTURES IS INCLUDED IN THE PURCHASE* Our store hours are 9am to 6pm Monday through Friday. If you have any questions please look at the FAQ section at the bottom of the listing. If your question was not answered. Please feel free to email us at our ebay account or you can call us at 337-436-0892. Thank you and Happy Bidding(S) U.S. International Shipping Information All shipping is based upon your location and will be calculated using eBay’s shipping calculator. Shipping prices can not be altered by the seller. Method of shipment will be decided by the seller based of location on buyer and the weight of the items purchased. Payment Information We accept payment using PayPal. Using a major credit card for payment can be arranged. We just ask that you message us and we will work with you to get it taken care of. International Buyers We do ship to certain places internationally. We participate in Ebay's Global Shipping Program. Where we ship internationally is based on the locations Ebay's Global Shipping Program ships to. For those unfamiliar with that program. Please click on
click to Enlarge click to Enlarge You are viewing a Miller Syncrowave 250 250 amp Tig Welder with Tig gun Coolmate 3 cooler. Complete with foot pedal. Fully tested 250 amp machine in EXCELLENT condition. View all the pictures and bid with confidence. internal: eb- 091613) SEND ME FURTHER QUESTIONS AND COMMENTS! Condition Legend: MINT/ NEW: Never used or appears never used. Excellent: Like new condition with very little wear Very Good: Few scratches or engravings. Good: Scratches or engravings. Small but noticeable. Fair: Substantial wear and scratches. But item is functional. WHAT TO EXPECT AFTER BIDDING AND WINNING: 1. Win your item! 2. Receive a total with shipping(UPS to the US) applicable taxes(5% GST only in Canada. 13% HST for Ontario and BC customers and the East coast) 3. complete payment(we accept paypal or credit card over the phone) ... more4. In just 5-7* days receive your item quickly with UPS to the US and Canada Post to Canada or a freight company INFO FOR SMALL ITEM SHIPPING ITEM WEIGHING 150lbs and LESS For items under 150lbs(30kg) I use UPS.com to the US and Canada Post to Canada. There are absolutely no issues with customs to the US. Canada Post is very fast within Canada(typically within 5 days) And UPS is equally as fast to the US usually taking around 5 business days. The cost listed below is shipping for the US using UPS. Canadian customers please email me to get a shipping cost for you which should be cheaper. I use an outside packager so after your payment is received, your item is sent another local business which packages and ships your goods. It may take up to 5 business days to get your item properly packaged and shipped. As soon as I receive your TRACKING#s I will email them to you and you can track using that number at or. Very rarely. Canada Post will LOSE or DAMAGE an item. I insure every shipment, but there is a process to getting the insurance money which can include direct contact and information from the receiver(which is you) I will definitely refund you if you do no
Up for sale is a Miller RFCS-14 HD Foot Control w/ Smith Valve and Hosing. This setup is in good working order with all items in good working order. The physical condition of the setup is fair with some marks on it from typical usage. The set comes with everything that is pictured only. We ship and answer questions Mon-Fri 8 am to 6 pm. Thank you for your time! Immediate payment required. Only ships within the Continental United States(Q1. JMT) this is how I inventory items 264344-1 10/11/13(HE) returns accepted
Up for sale is a Miller foot control cable for most Miller tig machines it has been checked out and tested ok. The foot pedal got run over by a forklift the pedal didn't survive but the cable was not scratched very good shape the pedal was only a month old. This is for a 14hd but can be installed on a regular 14 it is a heavy duty cord
click to Enlarge click to Enlarge click to Enlarge You are viewing a Miller Deltaweld 452 mig welder with a 60 series wire feeder and mig gun. There is a 50 foot extension cable to the feeder which allows it to be mounted on a jib or another location. Amazing setup that has the 4-wheel wire feeder and has been completely tested and works perfectly. 450 amp unit t ested and in very good condition. View all the pictures and bid with confidence. internal: eb- 102113) SEND ME FURTHER QUESTIONS AND COMMENTS! Condition Legend: MINT/ NEW: Never used or appears never used. Excellent: Like new condition with very little wear Very Good: Few scratches or engravings. Good: Scratches or engravings. Small but noticeable. Fair: Substantial wear and scratches. But item is functional. WHAT TO EXPECT AFTER BIDDING AND WINNING: 1. Win your item! 2. Receive ... morea total with shipping(UPS to the US) applicable taxes(5% GST only in Canada. 13% HST for Ontario and BC customers and the East coast) 3. complete payment(we accept paypal or credit card over the phone) 4. In just 5-7* days receive your item quickly with UPS to the US and Canada Post to Canada or a freight company INFO FOR SMALL ITEM SHIPPING ITEM WEIGHING 150lbs and LESS For items under 150lbs(30kg) I use UPS.com to the US and Canada Post to Canada. There are absolutely no issues with customs to the US. Canada Post is very fast within Canada(typically within 5 days) And UPS is equally as fast to the US usually taking around 5 business days. The cost listed below is shipping for the US using UPS. Canadian customers please email me to get a shipping cost for you which should be cheaper. I use an outside packager so after your payment is received, your item is sent another local business which packages and ships your goods. It may take up to 5 business days to get your item properly packaged and shipped. As soon as I receive your TRACKING#s I will email them to you and you can track using that number at or. Very rarely. Canada Post will LOSE or DAMAGE an item. I insur
YOU ARE LOOKING AT A USED MILLER HF CC AC/DC WELDING POWER SOURCE WITH A MILLER RADIATOR- 1 COOLING SYSTEM AND A MILLER RFC- 23 FOOT CONTROL PEDAL For SMAW and GTAW Welding 250 Amperes. 30 Volt DC@ 40% Duty Cycle(See Specs) Single Phase Input Power Overload and Thermal Protection High Frequency Switch AS IS OR MAKE OFFER a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-141e7cbd7b3-0xf9-
aims MILLER RFC-23A REMOTE FOOT PEDAL CONTROLLER w/ 20 ft. CORD read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made in the U.S.A. by Miller. This is a Tig Welder Controller Foot Pedal in Good condition. Model# RFC-23A Specifications: Includes 20 ft. cord. Overall Dimensions: 11" x 6" x 7" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. MILLER RFC-23A REMOTE FOOT PEDAL CONTROLLER w/ 20 ft. CORD MILLER RFC-23A REMOTE FOOT PEDAL CONTROLLER w/ 20 ft. CORD MILLER RFC-23A REMOTE ... moreFOOT PEDAL CONTROLLER w/ 20 ft. CORD Reliable Tool Inc. c 2011 | Powered by
Original Super Bowl Banner from 1999. It's in good condition for it's age with some cracking along the edges( see photos) Measures 3 X 6 feet, and still has the strings attached. Will be shipped rolled in a mailing tube.
This is a used less then a year old Miller Dynasty 200DX 115/ 230 volt welder. It has some scratches, dings and wear marks This welder comes complete with foot pedal.12 foot super flex tig torch cable, 17 torch head, 9 flex torch head, CK17 25 foot super flex torch, argon regulator and hose, ground cable and clamp, stick welding stinger and cable, power cable 50 amp plug installed and 230 to 115 volt pigtail This unit has been tested in all modes I STAND BEHIND THE ITEMS I SELL WITH PRIDE AS A HARD WORKING AMERICAN PLEASE LEAVE POSITIVE 5 STAR FEEDBACK I WORK VERY HARD TO KEEP MY FEEDBACK RATING PLEASE CONTACT ME IF THERE IS A PROBLEM BEFORE LEAVEING FEEDBACK. THANK YOU, To learn more about this and other items I have for sale on ebay or for customer service go to georgesplasmacuttershop.com
MILLER RFCS-14 Foot Pedal Control Stock No. 043 554 Up for sale is this MILLER RFCS-14 Foot Pedal Control Stock No. 043 554. Unit is used in VERY GOOD! condition and is fully functional. Unit was replaced with a wireless pedal. Please see ALL photos for the best physical description for this item. P lease examine the pictures and email any questions. Thank you for looking and good luck bidding. Will ship to 48 States. Hawaii. Alaska, Puerto Rico buyers/ bidders must get a shipping quote before purchase/ bidding. NO international shipping for this item.
For sale is a Miller Remote Amperage Foot Controller for tig welding. It has very little use and is guaranteed or your money back.