In 
 
Order by: 
Available to: 
Price: 
 - 
$
160
Buy It Now
Free Shipping
Condition: New
Location: Deer Park,TX,USA
$
499.99
Buy It Now
$23 Shipping
Condition: Used
Location: Milton Freewater,OR,USA
Miller Wireless Foot Control# 300724 and# 300722 Wireless Receiver 14 Pin NEW Improves productivity and maneuverability by eliminating cord tangles. Reduces ... moreclean up time and work area cord clutter Improves safety by eliminating control cord and reducing potential trip hazard. Multiple frequency sharing allows up to 20 systems to operate in a 90-ft(27.4 m) radius with accuracy and precision— and without delay. System interference, or crosstalk Auto On feature extends the battery life up to 250 hours of welding without turning the pedal on and off. Improves productivity and maneuverability by eliminating cord tangles. Reduces clean up time and work area cord clutter. Easy-to-install receiver plugs directly into the 14-pin receptacle of Miller machines. Easily programmable. The Wireless Remote Foot Control can be quickly and easily paired with any other Miller 14-pin wireless receiver. Control is preprogrammed when purchased with the receiver. The Wireless Remote Foot Control is recommended with following Miller power sources: Dynasty® 200 SD and DX Dynasty® 350 Dynasty® 700 Maxstar® 150 STL and STH* Maxstar® 200 SD. DX and LX Maxstar® 350 Maxstar® 700 Syncrowave® 250 DX Syncrowave® 350 LX ~~ These are NEW IN THE BOX Items. Only opened to find out what they were and take pics! Insurance is added to shipping price. ALWAYS READ THE SMALL PRINT* I try to provide the photos and information of the items I have up for auction as clear as possible. Please e-mail if you have any questions about this item before placing a bid. Payment is expected within 3 days of end of auction. Unless it is a buy it now auction or I accept an offer you have made, them payment is due IMMEDIATELY. I try to always ship within 3 business days of end of auction. I do combine shipping so check out my other auctions! Thanks so much for looking and have a great day! Posted with:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1404dcc4afb-0xfc-
$
900.01
5h 17m 9s
28 bids
Free Shipping
Condition: New – Open box
Location: Port Charlotte,FL,USA
Store Categories. Click to close full size. MILLER ELECTRIC. 300430, Wireless Hand Control& 14-Pin Receiver. MILLER ELECTRIC. Item Specifics. Item. ... moreWireless Remote Kit. Type. Includes. 14-Pin Receiver. Item. Wireless Remote Kit. For Use With. Big Blue Air Pak. Big Blue Turbo, Big Blue, Big 40 CC/CV, Big Blue 300 Pro, Big Blue 350 PipePro, Big Blue 400 Eco Pro, CST 280, Deltaweld Series, Dimension Series, Diversion 180, Dynasty 200/350/700, Gold Star Series, Invision MPa/MP/P, Mark VI, Maxstar 150 STL/STH, Maxstar 200 SD/DX/LX, Maxstar 350/700, Miller Du-Op, PipePro 304, PRO 300, Shopmate 300, Sub Arc DC 650/1000, Summit Arc 1000/1250, Syncrowave 200, Syncrowave 250 DX/350 LX, Trailblazer 275/302 Series, XMT 304/350. Package Quantity. 1. California Prop 65 Orange Label. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. California Prop 65 White Label. This product contains a chemical known to the State of California to cause cancer. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a
$
17.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Pacific,MO,USA
$
16.99
Buy It Now
$0 Shipping
Condition: New
Location: Whittier,CA,USA
Brand new 14 pin. Metal, cord mounted female plug. We do combined shipping. Usually the Item will be shipped within 2 business days after payment completion. ... moreThe tracking info/numbers are listed in the transaction"details" Please allow 10-20 working days for the product arrival from China. Depend on the local delivery on your country; some of the location may require more days) We couldn't control the item delivery on time. If you have any questions please feel free to contact me. Thanks for looking and please check out our other items
$
14.99
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
68.99
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
894.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
49.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
$
421.99
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
SquareTrade © AP6.0 Untitled Document BRAND NEW MILLER RFCS-14 HD FOOT CONTROL(194744) RFCS-14HD Remote Foot Control Foot pedal provides remote current ... moreand contactor control. Includes 20 ft(6 m) cord and 14-pin plug. For all Miller solid-state power sources after serial number JK674521. 195744, $296.00(US$) FREE GROUND SHIPPING TO ANY OF THE CONTINENTAL 48 STATES. PayPal: Paypal is preferred payment method. Credit Cards: Now right here in checkout. Select Credit Card Option and enter information exactly as on credit card statement and card. You may change ship to address during check-out. Call 866-854-7380, 8AM to 9PM Eastern Time(EST) 7 days a week with questions or concerns We expect payment within 3 days of purchase. We must charge sales tax as follows; Indiana(7.00% Illinois(6.25%Kentucky(6.00% Michigan(6.00%and Ohio(6.50% WE USUALLY SHIP THE NEXT BUSINESS DAY AFTER PAYMENT RECEIVED. SAME DAY IN SOME CASES. UPS SENDS TRACKING INFORMATION TO YOUR EMAIL ADDRESS USED FOR SALE. TRUCK TRACKING INFO SENT IN SPERATE EMAIL. FREE GROUND SHIPPING TO ANY OF THE CONTINENTAL 48 STATES. All items are covered by Manufacturer warranties. We will help you with any warranty issues. Small items shipped by Economy mail. With Priority mail option, or UPS,each listing shows the standard way it will ship, with options for faster shipping. unless you choose 1st or 2nd day air at additional charge. Larger welders are shipped via common carrier of our choice. We get it to your door. Additional charges for lift gates or special delivery are at your cost. Some welders are not stock items and will be ordered from manufacturer when paid for. This is stated clearly in the listings that are non-stock items. It usually takes only a few days to ship to you. Some are shipped direct from manufacturer. WE INSURE ALL SHIPMENTS. NO RETURNS UNLESS DAMAGED BEYOUND REASONABLE REPAIR IN SHIPMENT OR AGREED UPON RE-STOCKING AND SHIPPING CHARGES PRIOR TO RETURN. EXCHANGES ONLY WHEN AGREED BEFORE RETURNING. EXCHANGES AND R
$
177.99
Buy It Now
$0 Shipping
Condition: New
Location: George West,TX,USA
$
15.99
Buy It Now
$0 Shipping
Condition: New
Location: Santa Fe Springs,CA,USA
$
150
Buy It Now
$8.75 Shipping
Condition: New
Location: Houston,TX,USA
$
16.99
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
$
13
Buy It Now
$3 Shipping
Condition: New
Location: China
Brand new 14 pin. Metal, cord mounted female plug. We do combined shipping. Usually the Item will be shipped within 2 business days after payment completion. ... moreThe tracking info/numbers are listed in the transaction"details" Please allow 10-20 working days for the product arrival from China. Depend on the local delivery on your country; some of the location may require more days) We couldn't control the item delivery on time. If you have any questions please feel free to contact me. Thanks for looking and please check out our other items
$
209.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
$
306.99
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
North/South rotary-motion fingertip control fastens to TIG torch using Velcro straps. Includes 26.5 ft(8m) control cord.
$
90.99
Buy It Now
$4.95 Shipping
Condition: New
Location: Salem,OR,USA
$
15.99
Buy It Now
$0 Shipping
Condition: New
Location: Santa Fe Springs,CA,USA
$
190
Buy It Now
$0 Shipping
Condition: New
Location: Mulvane,KS,USA
$
229
Buy It Now
$0 Shipping
Condition: New
Location: Pearland,TX,USA
$
157.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
40
Buy It Now
$8 Shipping
Condition: Used
Location: Waterford,WI,USA
$
410.99
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
Miller RFCS-6M Foot Amperage& Control(195183) ITEM DESCRIPTION This listing is for a brand new Miller RFCS-6M(6-pin plug) Foot Amperage Control(195183) ... moreand is designed for the Miller Maxstar 150STL/STH Series Welders. This foot control comes with a 13.25ft(4m) cord and plug. SHIPPING INFO We offer free shipping to the Continental 48 States. Alaska and Hawaii residents. Please email us prior to placing your order for a quote on shipping. We will gladly accept returns received within 14 days of delivery for a full refund. Minus our original shipping cost. Orders returned outside of the 14 day window are subject to a 20% restocking fee. Plus our original shipping cost. Returned items must be unused. In brand new condition, in original packaging. Items returned without their original packaging or in used condition are not eligible for refund or exchange and will be returned to you at your expense. ABOUT US The IOC in Welding Supplies stands for Indiana Oxygen Company. IOC has been a leader in the welding and gas industry since 1915. Making us the oldest independently owned Welding Supply Company in the county. After all these years, we're still a family owned company that is passionate about customer service and the products we sell. Our internet department was created in 2000 has been shipping products to our loyal customers across the country ever since. We like to think that we have some of the most knowledgeable customer service reps in the industry. Feel free to email or call us with questions about a product. To check the status of your order, or vent about the big game last weekend; we're here to help Monday through Friday, 8am to 6pm EST.
$
1,428
Buy It Now
$0 Shipping
Condition: New
Location: USA
Store Categories. Click to close full size. MILLER ELECTRIC. 300430, Wireless Hand Control& 14-Pin Receiver. MILLER ELECTRIC. Item Specifics. Item. ... moreWireless Remote Kit. Type. Includes. 14-Pin Receiver. Item. Wireless Remote Kit. For Use With. Big Blue Air Pak. Big Blue Turbo, Big Blue, Big 40 CC/CV, Big Blue 300 Pro, Big Blue 350 PipePro, Big Blue 400 Eco Pro, CST 280, Deltaweld Series, Dimension Series, Diversion 180, Dynasty 200/350/700, Gold Star Series, Invision MPa/MP/P, Mark VI, Maxstar 150 STL/STH, Maxstar 200 SD/DX/LX, Maxstar 350/700, Miller Du-Op, PipePro 304, PRO 300, Shopmate 300, Sub Arc DC 650/1000, Summit Arc 1000/1250, Syncrowave 200, Syncrowave 250 DX/350 LX, Trailblazer 275/302 Series, XMT 304/350. Package Quantity. 1. California Prop 65 Orange Label. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. California Prop 65 White Label. This product contains a chemical known to the State of California to cause cancer. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a
$
12
Buy It Now
$3 Shipping
Condition: New
Location: China
$
234.95
Buy It Now
Free Shipping
Condition: New
Location: Elk Grove Village,IL,USA
$
29.95
Buy It Now
$0 Shipping
Condition: New
Location: Elk Grove Village,IL,USA
$
16.99
Buy It Now
$0 Shipping
Condition: New
Location: Whittier,CA,USA
$
16.99
Buy It Now
$0 Shipping
Condition: New
Location: Pasadena,CA,USA
$
89
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Millstadt,IL,USA
$
10
Buy It Now
Free Shipping
Condition: New – Open box
Location: Waurika,OK,USA
$
51.35
Buy It Now
$0 Shipping
Condition: New
Location: Tampa,FL,USA
$
248.99
Buy It Now
$0 Shipping
Condition: New
Location: Indianapolis,IN,USA
Miller#187208 RMS-14(MOMENTARY PUSH BUTTON) HAND CONTROL SWITCH NEW IN PACKAGE WITH MANUAL.
$
39.99
Buy It Now
$0 Shipping
Condition: New
Location: Santa Fe Springs,CA,USA
$
193.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
17.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
588.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
65
Buy It Now
$9.95 Shipping
Condition: New
Location: Philadelphia,PA,USA
$
37
Buy It Now
$4.5 Shipping
Condition: New
Location: Salem,OR,USA
$
28.19
Buy It Now
$0 Shipping
Condition: New
Location: Bixby,OK,USA
$
16.99
Buy It Now
$0 Shipping
Condition: New
Location: Cleveland,TN,USA
$
99.95
Buy It Now
$10.5 Shipping
Condition: New
Location: Philadelphia,PA,USA
$
40.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
175
Buy It Now
$0 Shipping
Condition: New
Location: Spartanburg,SC,USA
$
85.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
178
Buy It Now
Free Shipping
Condition: New
Location: Carlsbad,CA,USA
$
244.2
Buy It Now
Free Shipping
Condition: New
Location: Carlsbad,CA,USA
$
400
Buy It Now
$15 Shipping
Condition: New
Location: Houston,TX,USA
$
150
Buy It Now
$7 Shipping
Condition: New
Location: Indianapolis,IN,USA
$
90.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
244.2
Buy It Now
Free Shipping
Condition: New
Location: Carlsbad,CA,USA
$
277.88
Buy It Now
Free Shipping
Condition: New
Location: Carlsbad,CA,USA
$
256.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
335.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
$
115
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Rock Hill,SC,USA
$
21.4
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Tampa,FL,USA
$
32
Buy It Now
$10 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
208
Buy It Now
Free Shipping
Condition: New
Location: Carlsbad,CA,USA
27' Large 14 Pin Miller Finger Tip Amp Control Thumb Wheel[Part# A-MFTC-14] Vendor's Part#A-MFTC-14] 14 Pin Plug Miller® Finger Tip Amp Control. ... more27' East/West On-Off Switch and Amperage Control Mounts to TIG Torch Handle with Nylon Zip Ties, or Can Be Hand Held. Ideal for Out-of-Position TIG Welding. Complete with 27' 8.2m) Control Cable and 14 Pin Connector for Miller® Power Supplies. Note: Your Miller® machine may have a"Large" 14 pin plug connector with only 5 pins installed. Though if you look you’ll see that there is room for 14- some new plugs have 14 pins with only five being active. It may be helpful to note that the there is a smaller“5 pin” plug with 5 pins installed. Direct Connects To: AeroWave. Dimension 302, 400, 452, 650, 652& 1000 Dynasty DX. 200 and 300(SD,DX,LX) EconoTig GoldStar 300SS. 400SS, 500SS, 600SS GoldStar 302. 452, 652 Invision 345MP. 456P& 456MP MaxStar 91. 152, 175, 200(SD,DX,LX, STR) MaxStar DX 200& 300(SD,DX,LX) Maxtron 300& 450. MK VI, Phoenix 456 ShopMaster 300 Synchrowave 180SD. 250, 300 350LX, 351, 500& 500P TIG Runner. XMT 200, 300& 304, CST 250, PipePro 304 Pro 300. Pro 350D. FOR ADDITIONAL INFORMATION VISIT-
$
40.99
Buy It Now
$0 Shipping
Condition: New
Location: Winona,MN,USA
1 2 3
 In 

Past Items  
 
I tried it one time and couldn't get the hang of it. I'm going to stick with the foot pedal. This thing is like brand new it is the 14 pin miller version 28 feet long some specs from ck website innovative ergonomic design fits in the welders hand comfortably provides complete on/off and full amperage control 3 different handle configurations possible with different finger guards choice of built-in handle or Velcro™ straps"plug and play" replacement potentiometer assembly(no soldering required) adapts to most standard TIG power supplies protected against high frequency Posted with
Miller Electric 122973-25ft 163519 14 Pin Extension Cord Cable SPECIFICATION Bullseye Catalog# 30408 Weight: 6 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA ... moreSALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY OR click AD
Miller RFC-E remote foot control with 14 pin AMP plug. There are 5 pins used in this plug please make sure it will fit your application. This control is in great shape and works fine I have used it, no cuts or repairs on the cord. All forms of payment accepted but must clear before shipping.
Cable has been in tool room for a spare and is in good condition. Posted with f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13eb9488e5c-0x105-
THIS IS A NICE 50FT 14 PIN MILLER WELDING CABLE GOOD CONDITION# Shipping on this item is 28.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase ... moreif it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item14.
This is a good working used CK WORLDWIDE TRIM LINE 210V-RG 25 foot tig torch. It has the fingertip on/off switch that locks on so you don't have to hold it on long runs. Rated at 200 amps DC AND 200 amps AC at 100% duty cycle. It has a Miller 14 pin connector. Please Note: It will need a new argon gas hose I STAND BEHIND THE ITEMS I SELL WITH PRIDE AS A HARD WORKING AMERICAN PLEASE LEAVE POSITIVE 5 STAR FEEDBACK I WORK VERY HARD TO KEEP MY FEEDBACK RATING PLEASE CONTACT ME IF THERE IS A PROBLEM BEFORE LEAVEING FEEDBACK. THANK YOU, To learn more about this and other items I have for sale on ebay or for customer service go to georgesplasmacuttershop.com
Up for sale is a used Heavy Duty Profax MFC-14 Foot Amperage Control 25' Miller 14 Pin Plug w/Manual. Fits Miller Tig Welders with 14 pin receptacles. The cable has had a repair done to it at some point. See picture.
YOU ARE BIDDING ON A PENNSYLVANIA LION CLUB PIN. A LION OFFERING LIONS PINS/ REMBERBELLIA FOR OVER 10 YEARS ON EBAY! I HAVE MANY OTHERS IN MY EBAY STORE!NOW GREAT DEALS ON AMERICAN CIVIL WAR PINS IN THE STORE! Powered by The free listing tool. List your items fast and easy and manage your active items. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13fc7214f9a-0x101-
Miller 24 volt feeder can be used on Miller machines that have a 14 pin connector. Great working unit that was replaced by automation in the factory. This machine has been cleaned and tested by Miller Certified Tech to be in good working condition. It will come with.045 drive rolls NOT the.035 that you see in the picture. There is NO gun included. It uses the standard Miller gun connector. Any questions. Please ask and i will respond ASAP
Description: Miller 122973 25 ft Extension cord For 14-pin remote contactor and voltage controls/ 24 VAC wire feeders. Provides 14-pin. 24 VAC, plug to a 14-pin socket. New part number is 242208025 Not for XR-M. Optima, or 60M series feeders(not all pins installed in plugs) Condition: Used but in good condition Ask any questions you may have Included: Extension cord as pictured Shipping: 10.50 to lower 48 Actual cost anywhere else Payment: Cash at pickup if local. Or Pay-Pal Payment must be received within 4 days Powered by The free listing tool. List your items fast and easy and manage your active items.
Selling a used 50ft Miller 14 pin extension cord with 8 conductors. The Miller part number is 242208050. This can be used with many Miller machines/feeder such as 12RC. 70 series, XR controls, and many other 24VAC setups. One end is a male and the other end is a female socket. Let me know if you have any questions. Thanks
Used miller RFCS-14 HD foot control 194744. The miller RFCS-14 HD heavy-Duty foot control is compatible with all miller solid-state power sources equipped with a 14-pin receptacle AFTER serial#JK684521. Switch worked when in use un sure of working condition as of now worked great prior to auction. New design increases stability with a larger base and a heavy 20 ft cord that can be exit the front. Back or either side of the foot pedal. Provides remote current and contactor control. 14-pin plug. Item has some rust on base and discolor on foot pedal along with several scratches some can be seen within the pictures however it does have some that can't be seen as well. You are purchasing a previously used foot switch. Please ask any questions prior to auction end. Buyer is responsible for all shipping& handling costs. Item leaves warehouse ... morewithin 24-48 hours of cleared payment. Combined shipping to same address is available on all items contact us for a quote. Switch has not been tested and worked prior to warehouse relocation. So being sold as is in good used condition. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-143d2224005-0xee-
USED MILLER RFC-14 FOOT CONTROL GOOD CONDITION UNIT HAS BEEN TESTED AND WORKS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-143f21f7392-0x108-
AMTCV-1-2-M14 Amptrak Clip 1k Ohm 28' cord for Miller Tig 14 Pin Machines Item is obviously used. Condition is as shown in pictures. SEE PICTURES If you have any Questions Please message me. Thanks for Looking! Terms1. Only items pictured above are included in the listing. Please inspect all of the pictures thoroughly. 2. Please ask your questions before bidding so that you are 100% sure that you want the item. 3. By placing a bid you have agreed to purchase this item based on the description and pictures above. 4. Payment must be received within 48 hours of the auction end time unless you have contacted me to make other arrangements BEFORE YOU BID. Non-Pay bidder cases will be issued for those who go over eBay’s allowed amount of time. 5. Item will be shipped within 1 day after payment has cleared. Paying by E-Check may take up to a ... moreweek to clear. 6. We do not ship out of the US or to US Protectorates. APO/FPO, or to a PO Box if the shipping method is via FedEx. WE DO NOT SHIP INTERNATIONALLY. We do not normally ship to Alaska or Hawaii. If you live in Alaska or Hawaii and would like to pay any additional shipping costs incurred just send me a message with your Zip code and I will check the shipping rate. 7. We do not ship on Saturday or Sunday and Holidays. Anything purchased Friday afternoon. Saturday, or Sunday will be shipped the following week. 8. We have a 14 day warranty after the item(s) have been received by the buyer if the item is faulty or not as described. In order to receive a refund the item must be in the same condition you received it in. And it must have the security mark fully intact, also we require that the item be shipped back with shipping insurance for the amount that it was purchased. A 20% restock Fee will apply for a return for any reason other than the item is faulty or not as described. All items have a security mark to ensure that in the event that an item is returned it is in fact the exact item that was sold. 9. We will NOT accept returns on items that we are selling as is or
AMTCV-1-2-M14 Amptrak Velcro 1k Ohm 28' cord for Miller Tig 14 Pin Machines. The item looks to be in"LIKE NEW" CONDITION. There is a couple minor scratches on the finger control and a scuff on the connector. PLEASE SEE PICTURES If you have any Questions Please message me. Thanks for Looking! Terms 1. Only items pictured above are included in the listing. Please inspect all of the pictures thoroughly. 2. Please ask your questions before bidding so that you are 100% sure that you want the item. 3. By placing a bid you have agreed to purchase this item based on the description and pictures above. 4. Payment must be received within 48 hours of the auction end time unless you have contacted me to make other arrangements BEFORE YOU BID. Non-Pay bidder cases will be issued for those who go over eBay’s allowed amount of time. 5. Item ... morewill be shipped within 1 day after payment has cleared. Paying by E-Check may take up to a week to clear. 6. We do not ship out of the US or to US Protectorates. APO/FPO, or to a PO Box if the shipping method is via FedEx. WE DO NOT SHIP INTERNATIONALLY. We do not normally ship to Alaska or Hawaii. If you live in Alaska or Hawaii and would like to pay any additional shipping costs incurred just send me a message with your Zip code and I will check the shipping rate. 7. We do not ship on Saturday or Sunday and Holidays. Anything purchased Friday afternoon. Saturday, or Sunday will be shipped the following week. 8. We have a 14 day warranty after the item(s) have been received by the buyer if the item is faulty or not as described. In order to receive a refund the item must be in the same condition you received it in. And it must have the security mark fully intact, also we require that the item be shipped back with shipping insurance for the amount that it was purchased. A 20% restock Fee will apply for a return for any reason other than the item is faulty or not as described. All items have a security mark to ensure that in the event that an item is returned it is in fact the e
MILLER TIG PEDAL RFC-14 NO WAY TO TEST BUT DOES NOT LOOK. MOVES FREELY. ABUSED. QUESTIONS EMAIL OR CALL 704-279-2560 PAUL.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14767b67f6d-0x10e-
Older style remote control for Miller 14 pin control. Have used it on a Synchrowave 351 Thanks for looking
This TIG remote control was removed from a working Trailblazer 251NT set up. I replaced it with a foot control so no longer need this one. It shows wear that you would expect from a working unit. The remote performs flawlessly and is ready to work for you. It has 25 ft. of cable so you can comfortably work away from your welder and not have to walk back to adjust your heat. You can do so as you weld. Just like with a foot control.
THIS IS A MILLER LDR14 REMOTE AMPERAGE CONTROL 043955 195511 FOR MILLER GAS AND DIESELS DRIVE WELDERS THAT HAVE A 14 PIN CONNECTOR. YOU CAN CONTROL THE MACHINE AMPS AND HAVE A 120 VOLT RECEPTACLE NEARBY FOR GRINDERS. HF BOX ETC. IT TAKES THE 120 FROM THE MACHINE NOT THE 14 PIN SO YOU HAVE MORE USABLE AMPERAGE. WE MEASURED IT AT AROUND 125 FEET. ONE END PLUGS INTO THE MACHINE 14 PIN OUTLET AND MACHINE 120 VOLT RECEPTACLE. THE OTHER END HAS THE CURRENT ADJUSTER AND A DOUBLE GFI RECEPTACLE FOR 120 VAC. HOUSED IN WATER PROOF BOXES. IT IS USED AND IN GOOD USABLE CONDITION. IF YOU GET MULTIPLE ITEMS OR GET MORE THAN ONE ITEM FROM ANOTHER ONE OF MY AUCTIONS. JUST CLICK ON COMMIT TO BUY FOR EACH ONE AND I WILL SEND AN INVOICE WITH COMBINED SHIPPING THAT YOU CAN PAY PLEASE CHECK OUT OUR OTHER ITEMS BY CLICKING THIS LINK TO OUR SELLING PAGE: YOU CAN ... moreGOOGLE(MILLER LDR14) FOR THE OWNERS MANUAL. ITS FREE IN A PDF FORMAT FOR DOWNLOADING. WE FORGOT TO ADD THE PICTURE OF THE 120 OUTLET. IT IS ON THE BACK SIDE OF THE CURRENT CONTROL IN THE BOX.
This is a very gently used Miller Rccs-14 Remote Contactor And Current Control(14-Pin Plug) 043688) Works perfect but I prefer the foot control.
HERE IS A VERY GOOD CONDITION MILLER RFCS-14-HD FOOT CONTROL. FOOT PEDAL FOR MILLER 14 PIN MACHINES. IT IS IN LIKE NEW CONDITION AND WORKS FINE. CABLE IS IN GOOD CONDITION. NO CUTS, KINKS. I WAS USING ON A MILLER DYNASTY 200. ITEM SOLD AS IS NO WARRANTY. I HAVE CHECKED OUT AND USED THE FOOT CONTROL AND KNOW IT IS IN GOOD WORKING ORDER. SHIPPING WILL BE $15.00. UPS ONLY AND WILL ONLY SHIP IN THE LOWER 48 STATES ONLY. THANKS FOR LOOKING AND HAPPY BIDDING. EMAIL IF YOU HAE ANY QUESTIONS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14a9764d001-0x10c-
MILLER 14 PIN FOOT PEDAL FOR TIG WELDER 20' 043554 YOU ARE BIDDING ON A MILLER 14 PIN FOOT PEDAL FOR TIG WELDER 20' 043554 REFURBISHED FITS MILLER TIG WELDERS WITH 14 PIN CONNECTIONS I DO NOT HAVE ANY USE FOR THIS SO IT NEEDS TO GO WILL COMBINE SHIPPING ON MULTIPLE WINNING BIDS. PLEASE WAIT FOR FINAL BILL IF THIS IS THE CASE. SHIPPING TO ALL 50 USA STATE ADDRESSES ONLY AT THIS TIME! EXPECT WINNING BIDDER TO PAY IN 48 TO 72 HRS OF BID CLOSING. WILL SHIP 2 TO 3 BUSINESS DAYS AFTER RECEIVING CLEARED PAYMENT. WILL LEAVE POSITIVE FEEDBACK WHEN FEEDBACK IS FIRST RECEIVED. ANY QUESTIONS PLEASE LET ME KNOW AND I WILL ANSWER AS QUICKLY AND TO THE BEST INFO I CAN FIND. THANK YOU!
THIS IS A GOOD MILLER FOOT CONTROL. RFCS-14. MILLER PART NO IS 043554. IT IS IN GOOD SHAPE. CORD HAS NO CUTS, KINKS. TAKEN GOOD CARE OF. IT WORKS VERY WELL AS DAY IN WAS NEW. 14 PIN PLUG, WILL FIT ALL MILLER TIG MACHINES WITH THE 14 PIN PLUG. SOLD AS IS NO WARRANTY. SHIPPING WILL BE $15.00 BY UPS ONLY. ONLY SHIP TO THE 48 STATES. IF YOU HAVE ANY QUESTIONS PLEASE EMAIL. TKS FOR LOOKING. HAPPY BIDDING.
Brand new in baggy. Was used for display by salesman. But never hooked up or used.This system costs over $800(check around for yourself! but because of no box, you SAVE $$$! THE FINE PRINT" YES I SHIP OUT OF COUNTRY NO MATTER WHAT MY PREFERENCES SAY! DUE TO MY BUSY SCHEDULE. I DO NOT DO QUOTES. PLEASE GO TO USPS.COM AND GET AN ESTIMATE FOR YOURSELF FROM USA ZIP CODE 55719. I DO SHIPPING DISCOUNTS. BUT DO NOT DO DISCOUNT SHIPPING ESTIMATES AHEAD OF TIME as it is impossible to predict what you will actually win. Trust in my ratings, I treat my customers right. I do shipping DISCOUNTS according to size, weight, volume, and common sense. Due to shipping costs, materials, and other factors, I do not discount large or heavy items such as rims, motors, forks, frames,saddlebags etc. PLEASE KEEP IN MIND these are motorcycle parts. Not Beanie ... moreBabies. You cant start cramming together jugs, cylinders, with frames and forks. It takes alot of time and effort to properly pack items to prevent damage. Some items just cannot be discounted.Also keep in mind, postal rates went up again this year by ALOT. I do not weigh items and charge to the exact penny, therefore I use flat rates, and they are not negotiable. All invoices are final, not up for discussion under any circumstances. ALL PAYMENTS ARE DUE within 5 days of the auctions end. I file with Ebay on all items not paid for. All parts sold as-is no matter what my preferences state. Unless the description is an error or oversight on my behalf. Then please contact me through ebay if you have a problem and I'll be happy to help.Absolutely NO returns on electrical components. My electrical items are tested before listed. Please check my feedback, I am easy to deal with and TAKE CARE OF MY CUSTOMERS. My number one goal is to keep those vintage bikes on the road! Powered by The free listing tool. List your items fast and easy and manage your active items.
Bought this miller foot control from my local weld shop on the 24th of december- turns out my wife got me another brand foot pedal for Christmas as a gift. Now I have two foot pedals and one machine for my house. Can't sell the present cause that's rude- so this is up for auction. It has been used 4 times in a hobby setting and works 100% as new. Has a 25' foot long cable(i believe) and is the HD model.
This auction is for a real good condition Miller foot control. Part no 194744. RFCS-14 HD. It is 14 pin control. Will work in all Miller 14 pin tig machines. It is in great shape. Cable and controller. Shipping will be $15.00 by UPS only. Only ship in lower 48 states. Sold as is no warranty. Thanks for looking.
This auction is for a good used Miller 24 vac control cable or extension cable. Miller part no 122973 or 242208025. It is 25 ft. It has the 14 pin male plug and 14 pin female plug. It will work on any miller 24vac machine. Feeder. Foot or hand control. Use to extend a Miller feeder 25 ft. It is in good condition. No cuts kinks. It has 8 pins. Contractor control. Also has remote voltage control. Shipping will be $15.00 by ups only. Only ship to lower 48 states. Sold as is no warranty. Thanks for looking.
The cable is dirty. Otherwise new condition. AWM 2464 22AWG 80C 300V Check out our other listings. We can combine shipping. Contact us for an invoice on multiple items for shipping discounts. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14b948fde78-0x106-
Connector is USED. But in good shape. 14 Pin Amphenol Replacement Receptacle for Miller XMT 304. Trailblazer and others. The Miller Electric Part Number for this Connector is 086022. The shell of the Receptacle is an Aluminum Alloy. Free Shipping via USPS First Class Package. Lower 48 only.
One used Miller Tig Torch with Tungsten and attached Miller RCCS-14 Remote Contactor and Current Control 14 Pin Adjust amp with thumb wheel on torch Cable jackets have no rips. Tears or damage. My Miller 185 SD went bad cost more to repair than a new one So no longer need this item. Remote is a $200 plus item and can be removes from this tig torch if you want. Is secured to tig torch with Velvro straps Tig torch has quick connect for weld machine.
fingertip remote tig control. I cant remember the brand. one of the two velcro straps is heat damaged. melted) works fine.
Miller Welder 50' Remote Extension Cord Cable 122974. 14 PIN 24 VAC. No nicks or burns through to the copper. Just scratches and scrapes from normal use. This is a good deal at $125.00. Used cable is in good condition. There are no nicks or cuts through to the copper. There is normal scratches and nicks from use. The cable is supple and it has not been overheated. The copper is clean(no blackening from abuse) Please see pictures. These items will ship Priority Mail. Thank you Please e-mail with any questions Winner must make contact including payment arrangements within 3 days of auction end. Payment must be received within 10 days of auction end. I reserve the right to resell any item if I have not received contact from the winner within 3 days, and or received payment for any item within 10 days of the auction end. I accept PayPal. ... moreI try to descibe exactly what the item is. Please email any questions. All sales final. I do participate in leaving feedback on Ebay. Thanks for looking and good luck! Powered by The free listing tool. List your items fast and easy and manage your active items.
Attention: If you have ZERO( 0) feedback. You must contact us before purchasing. If you do not. After payment is cleared, we will verify through PayPal that you have a verified PayPal account. Verified address& a telephone number provided. If these conditions are not met. Your order will be cancelled. Thank you! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Miller TIG Welding Finger Tip Rocker Control 14 Pin RMLS-14 129337 Used Condition Button in up position is permanently on Button down position is momentary on Button in center position is off International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. ITEM PICTURED ... moreIS THE ITEM YOU WILL RECEIVE UNLESS MORE THAN 1 QUANTITY LISTED* If you're unhappy with your purchase. Return item for full refund(buyer pays shipping) within 14 days. If item is not in working order or if item description is incorrect, seller will pay return shipping. Item must be returned in the same condition it was sent. You MUST contact us before returning an item. Please do not give us negative feedback without contacting us to resolve any issues you may have. Thank you! ~*We will usually ship same business day. After cleared payment*~. 315-33)
MILLER 14 PIN 50' EXTENSION CORD CABLE USED NICE Miller welder extension cable. Measures close to 50 ft. I ship world wide.