In 
 
Order by: 
Available to: 
Price: 
 - 
$
92.99
Buy It Now
$2 Shipping
Condition: New
Location: China
$
299.99
Buy It Now
$7.99 Shipping
Condition: Used
Location: Sunnyvale,CA,USA
For sale is: Herley CTI Phase Locked DRO. Tested with data. As of 2013/06/22 we had 13 different models(different eBay listings) of the DRO. All tested ... moreto output correct power, frequency and display lock. Link to manufacturer datasheet is here: Phase noise note: Phase noise below 300kHz is limited by the clock reference. Due to ultra-low phase noise nature of the device. In order to achieve specified phase noise, an ultra low noise clock reference is required. For example the Frequency Electronics FE-102, 100MHz reference has-170dBc/Hz phase noise at 10kHz offset. Reference clock note: The RF output frequency is related to the input frequency in an integer fashion. Typical reference clocks need to be in the 20MHz- 100MHz range. For example. A 13300MHz DRO needs a 100MHz clock(we found 50MHz and 25MHz to work as well) Please see pictures and data table. Manufacturer Herley CTI. Manufacturer Part Number PDRO T_13.3, Type PDRO. Phase Locked DRO, RF Output RF Output Port SMA-F. RF Output Power(dBm) +13dBm minimum(datasheet spec) 14.6dBm- 16.8dBm(measured across 13 models that we have in stock) RF Output Frequency(MHz) 13300 MHz +/ N*10kHz(N = multiplier factor) RF Output Frequency stability Reference dependent, Phase Noise Reference dependent, Offset(Hz) SSB Phase Noise(dBc/Hz) 100, reference dependent. See phase noise theoretical plot below table, 1K, reference dependent. See phase noise theoretical plot below table, 10K, reference dependent. See phase noise theoretical plot below table, 100K, reference dependent. See phase noise theoretical plot below table, 1M, 130, REF CLK Input REF CLK Input Port SMA-F. REF CLK Frequency(MHz) 100 MHz. As well as 50MHz, and 25MHz(tested) REF CLK Power(dBm) 3dBm to +3dBm(datasheet spec) We found that the DROs would lock with a-20dBm clock as well, DC Power Supply Voltage, 15VDC +/ 0.5V. Filtered feedthru connector, GND, Solder pin, Phase Lock Alarm Connector. Filtered feedthru TTL High. Locked. TTL Locked. Unlocked, Shipping: We always pack with care to
$
73.42
Buy It Now
$0 Shipping
Condition: New
Location: Chicago,IL,USA
$
199
Buy It Now
$0 Shipping
Condition: New
Location: Ferndale,MI,USA
$
36.79
Buy It Now
$3.99 Shipping
Condition: New
Location: China
$
4,889
Buy It Now
$75 Shipping
Condition: Used
Location: Israel
$
84.55
Buy It Now
$0 Shipping
Condition: New
Location: Chicago,IL,USA
$
184.51
Buy It Now
$0 Shipping
Condition: New
Location: Chicago,IL,USA
$
49.5
Buy It Now
$0 Shipping
Condition: New
Location: Chino,CA,USA
$
475
Buy It Now
$33 Shipping
Condition: Used
Location: Israel
$
0.99
Buy It Now
$3.99 Shipping
Condition: New
Location: China
$
264.16
Buy It Now
$0 Shipping
Condition: New
Location: Japan
$
275
Buy It Now
$0 Shipping
Condition: New
Location: Spokane,WA,USA
$
1,190
Buy It Now
$69 Shipping
Condition: Used
Location: Israel
$
4.14
Buy It Now
$4.82 Shipping
Condition: New
Location: China
$
105.99
Buy It Now
$0 Shipping
Condition: New
Location: Ontario,CA,USA
$
849
Buy It Now
$0 Shipping
Condition: Open box
Location: Fairfax,VA,USA
$
144.99
Buy It Now
$0 Shipping
Condition: New
Location: Suwanee,GA,USA
CPO Model PC1010. List Price: $149.99, CPO Price: $114.97, You save: $35.02(23% Availability: In Stock, Shipping: FREE Shipping Ultra-quiet and ultra-light ... morehand carry at only 20 lbs. Direct drive induction motor and pump for efficient operation, 1 HP(peak) and 0.5 HP(running) oil-less motor, 1 gallon air capacity. Aluminum tank, 4 amps at 115V with 120 PSIG maximum output, 1/4-in quick disconnect coupler, Individual tank gauges to regulate output pressure, Lube-less pump, CSA approved, 1-year warranty, Horsepower, 1, Fitting Type, NPT, Operating Pressure- PSI, 125, Height, 13 in. Power Type, Electric, Lubrication, Oil-Free, Tank Style, Hand Carry, Tank Construction, Aluminum, Air Consumption at 40 PSI- SCFM, 1, Pump Type, Cast Iron, Weight, 20 lbs. Amperage, 4, Air Consumption at 90 PSI- SCFM, 0.7, Length, 14 in. Tank Orientation, Horizontal, Tank Capacity, 1 gal. Air Inlet Size, 1/4 in. Drive System, Direct Drive, Width, 10 in. AC Voltage, 115V, Pump Speed- RPM, 3.400, Running Horsepower, 0.5, PC1010. 1 Gallon Electric Oil-Free Hand-Carry Compressor- PC1010, 1 Year Limited, For full warranty information. Please contact us at 800-714-0969* Warranty valid for US customers only, Orders outside the US are not protected by manufacturer warranty. All orders are still covered by CPO's 30-day Money Back Guarantee) Shipping and customs charges for non-US orders will be calculated when the item is added to cart, All corded products are designed to work with North American 110/120V outlets only. Products used in foreign outlets without proper use of a voltage adapter/converter will not be covered by CPO's return policy or 30-Day Money Back Guarantee, CPO's commitment to 100% customer satisfaction is backed by a 30-Day Money Back Guarantee! If you are unhappy with the condition of your product. Send it back unused and we will replace it with a different one. If you changed your mind or are unhappy with your purchase. Simply return it unused for a refund* CPO's 30-Day Money Back Guarantee is for
$
78.84
Buy It Now
$1.99 Shipping
Condition: New
Location: Monroe Township,NJ,USA
$
21,500
Buy It Now
$65 Shipping
Condition: Used
Location: Studio City,CA,USA
$
1,750
Buy It Now
Free Shipping
Condition: Used
Location: Farmingdale,NJ,USA
The 8970B Noise Figure Meter provides easy. Accurate measurements. Automatic second-stage correction makes accurate noise figure readings possible even ... morefor low-gain devices. Requires use of separate noise sources. Such as 346C. Displays noise figure and gain Frequency Range: 10 to 1600MHz Noise Figure measurement range: 0 to 30 dB(0.1 dB uncertainty) Noise Figure Resolution: 0.01 dB(0.001 dB over HP-IB) Gain Resolution: 0.01 dB(0.001 dB over HP-IB) Options: H18: Extends frequency from 1600 to 1800 MHz Includes 14 Day Warranty: Repairs will be made to items under specified warranty in the listing description. Full refund minus shipping cost will be given if the item is unable to be repaired or returned within specified warranty. Item is sold with items pictured only. No additional parts. Accessories or options are included if not pictured. Product information and descriptions are added for informational purposes only and do not indicate any additional items are included Returns: are accepted based on the warranty included in the individual listing description. Return shipping is the customer’s responsibility. If a unit is being returned for a refund. The refund excludes shipping cost, taxes or duties paid. If for any reason you are unhappy with your purchase. Please contact us before leaving negative feedback. We are always willing to work with our customers to achieve satisfaction. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-149427207e9-0x10a-
$
3,850
Buy It Now
$0 Shipping
Condition: New
Location: Woburn,MA,USA
$
69
Buy It Now
$0 Shipping
Condition: New
Location: Prospect,CT,USA
Store Categories. Click to close full size. MAKITA BO3710 Sheet Finishing Sander. 1/3 In, 1.7 A. MAKITA. Item Specifics. Item. Finish Sander. Type. Amps@ ... more120V. 1.7. Application. Sanding. Finishing, Polishing. Includes. Dust Bag. Sand Paper. Item. Finish Sander. Orbits per Minute. 11000. Bearings. Ball. Handle Design. Ergonomic. Switch Type. Trigger. Tool Weight. 3.5 lb. Type of Sandpaper. 1/3" Sheet. Lock. Yes. Tool Length. 10" Pad Size. 1/3 Sheet. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer service hours are Monday through Friday from 7:00 a.m. to 7:00 p.m. CST) About Us We understand the need for small businesses to stay competitive by not paying high prices for the products you need to keep your business running. By offering one price to all customers with no complicated discount structure. We are able to keep our prices low. We have a small. Dedicated staff that works ha
$
325
Buy It Now
$36 Shipping
Condition: Used
Location: Israel
$
216.98
Buy It Now
$0 Shipping
Condition: New
Location: China
$
24.97
Buy It Now
$0 Shipping
Condition: New
Location: Los Angeles,CA,USA
$
227
Buy It Now
$24.95 Shipping
Condition: New
Location: Summerfield,NC,USA
$
1,075
Buy It Now
$39 Shipping
Condition: Used
Location: Israel
$
1,390
Buy It Now
$75 Shipping
Condition: Used
Location: Israel
$
1,850
Buy It Now
$42.9 Shipping
Condition: Used
Location: Culver City,CA,USA
$
18.99
Buy It Now
$0 Shipping
Condition: New
Location: Schaumburg,IL,USA
X10 PRO XPPF 5 AMP Plug-in Noise Filter FOUR PACK For isolating electrical appliances that generate noise pollution on the powerline. Preventing X10 command ... moresignals from getting through to modules. This filter has a tuned circuit designed for peak supression of line noise at frequencies which can interfere with X10 signal transmissions. Rated at 120 VAC, 5A. ABOUT LINE NOISE Electrical devices such as TV. VCR, stereo, low voltage power supplies, computers, monitors and power/surge protection strips all have a tendency to“dump” electrical noise on the power lines. Because line carrier products such as X10 use the power lines as a communications path they are susceptible to interference. When noise is placed on the power lines it can attenuate. Corrupt and/or block the signals being transmitted or received throughout the entire house. Typically. Line noise will cause intermittent operation of the receivers. An example would be if you can turn on a light from a transmitter but cannot turn it off or dim it from the transmitter or you can turn off a receiver but cannot turn it on. The noisy device does not even have to be turned on. Because a TV or computer still have their power supplies on the power line when they are turned off. SOLVING LINE NOISE PROBLEMS Noise on the power line is solvable with the XPPF LINE FILTER. The easiest way to pinpoint the noise source is to shut off each circuit breaker one at a time(except. Of course the breakers that the controller and the non-responsive module are plugged into) and try the controller after each shutoff. When the module begins to work, you have isolated which breaker circuit the interference is coming from. Reset the breakers and systematically unplug each device on that last breaker circuit(TV. VCR, computer or low voltage lighting power supply) trying the controller after unplugging each one. When the problem module starts working upon unplugging a device. Then you have detected an offending device. The XPPF is plugged into the wall were the offending device was
$
254.99
Buy It Now
$0 Shipping
Condition: New
Location: Paramount,CA,USA
$
19.99
Buy It Now
$0 Shipping
Condition: New
Location: Walnut,CA,USA
$
89
Buy It Now
$39 Shipping
Condition: Used
Location: Israel
$
2,650
Buy It Now
$0 Shipping
Condition: New
Location: Canada
$
9,950
Buy It Now
$89.9 Shipping
Condition: Seller refurbished
Location: Studio City,CA,USA
$
5,250
Buy It Now
$44.95 Shipping
Condition: Seller refurbished
Location: Culver City,CA,USA
$
16.84
Buy It Now
$0 Shipping
Condition: New
Location: Alexandria Bay,NY,USA
$
19.95
Buy It Now
$0 Shipping
Condition: New
Location: Everett,WA,USA
$
14.95
Buy It Now
$0 Shipping
Condition: New
Location: Inwood,NY,USA
Close[X] FREE Shipping offer with FEDEX ground is for the 48 contiguous United states only. This excludes PO BOX and APO addresses($12 fee) This also ... moreexcludes Hawaii, Alaska, Puerto Rico, Virgin Islands, Guam and any other US territories outside the 48 US. For AK, HI and PR quotes refer to the expedited flate rate shipping service in the listing. For Intl. Shipping please refer to the shipping section in the listing. You have come to the right place! Please e-mail us your technical question. And our experts will send you links to our live ebay listings of the products that best fit your application. We have the ability to put together big systems, as well as low-priced systems that will sound great. Rockville RTR174 17 Ft. 4-Channel Twisted Pair Split Pin RCA Cable- Made of 100% Copper For The Best Signal Transfer and Maximum Performance THIS ITEM IS BRAND NEW IN ORIGINAL PACKAGING AND COMES WITH A 1 YEAR AUDIOSAVINGS WARRANTY. Click to enlarge(Photos will open in a new window) RCA cables are the backbone of your audio system. They are used for transferring audio and video signals. Without a proper cable and good signal. You can have a distortion, which would hold your system back from performing at its optimal capabilities. Don't ever settle for cheap RCA's because they will not provide a clean signal to your amplifiers or video sources. These Rockville RCA cables are 100% copper. And feature advanced technologies like triple shielding, magnetic interference rejection, woven outer shield, and more. The best way to ensure that you’ll have a good setup is to invest in good cables. Features: Rockville RTR174 17 Foot 100% Copper 4-Channel Twisted Pair RCA Cable 100% Oxygen Free Copper, 17ft(5.1m) Shielded Twisted Pair Premium Audiophile Grade RCA Interconnect Cable, High Performance Mini RCA Plugs, Tinned Copper Strands for Sonic Purity, Split Pin Technology Ensures a Secure Connection, Outstanding Noise Rejection. Accuracy, and Frequency Response, Color Coded Channel Identification, Also Available in: 3-Foo
$
96.05
Buy It Now
$0 Shipping
Condition: New
Location: Chicago,IL,USA
$
118.72
Buy It Now
$0 Shipping
Condition: New
Location: Alexandria Bay,NY,USA
$
47,500
Buy It Now
$75 Shipping
Condition: Seller refurbished
Location: Culver City,CA,USA
Agilent N8241A Arbitrary Waveform Generator Module w/ OPTS 016\125\300\330\350- CALIBRATED! You are bidding on an Agilent N8241A Arbitrary Waveform Generator ... moreSynthetic Instrument Module with options 016(16 M Sample Memory) 125(1.25 Giga-samples per second sample rate) 300(Enabling software for 16-bit dynamic sequencing) 330(Direct digital synthesis software) and 350(Function generator application) and a fresh certificate of calibration! Agilent's N8241A arbitrary waveform generator(AWG) is a synthetic instrument(SI) module that combines unprecedented performance with unsurpassed flexibility. Its combination of high resolution and high sampling rates enables designers to create ideal waveforms for accurate testing of radar, satellite, digital radio, and frequency-agile systems. Each channel provides modulation bandwidth of either 500 MHz at 1.25 GS/s or 250 MHz at 625 MS/s. With over 65 dBc of spurious-free dynamic range, complex signals with very high fidelity can be generated. When the N8241A is combined with a wideband I/Q upconverter, modulation bandwidth of 1 GHz(at 1.25 GS/s) or 500 MHz(at 625 MS/s) can be achieved at microwave frequencies, enabling realistic signal simulations for testing of IF and RF subsystems. THE CURRENT LIST PRICE FOR THIS UNIT WITH THIS OPTION CONFIGURATION IS $72,800 USD! Features: LXI class-A compliant Option 125: Simultaneously delivers 1.25 GS/s and 15 bits of vertical resolution. And 500 MHz of instantaneous analog bandwidth per channel Option 062: Simultaneously delivers 625 MS/s and 15 bits of vertical resolution. And 250 MHz of instantaneous analog bandwidth per channel Option 300: Dynamic sequencing is a hardware interface that allows the user to dynamically point to predefined carrier signals created with the direct digital synthesis engine Option 330: Direct digital synthesis. Provides efficient compression of narrowband modulation on a carrier Option 350: Function generator provides an easy-to-use. User-friendly graphical interface that simplifies creation of
$
45.75
Buy It Now
$3 Shipping
Condition: New
Location: China
$
1,450
Buy It Now
$0 Shipping
Condition: Used
Location: Fargo,ND,USA
$
29.99
Buy It Now
$0 Shipping
Condition: New
Location: Atlanta,GA,USA
$
47.99
Buy It Now
$8 Shipping
Condition: New
Location: China
Welcome to the Frontpage Home Shipping Return Payment Contact us Home Mobile ACC Home& Garden Electronics Others The most popular item was. Description: ... moreKey Functions: The UP output waveform select, The DOWN output waveform select, LEFT output frequency- RIGHT output frequency +, STOP/ RUN the output stop/ start, UP" key waveforms order: ECG = electrocardiogram wave(in the OFF state. The"left"and"right" keys to set the output frequency. Middle button start, all of the following waveform set) Rev Sawtooth = reverse sawtooth, SawTooth = sawtooth, Triangle = triangle wave, Square = square wave, Specification: Operating voltage: DC7-9V, DDS frequency range: 1HZ-65534Hz, High-speed frequency(HS) output up to 8MHz, DDS signal amplitude of the offset amount can be adjusted separately by two potentiometers, DDS signals: sine wave. Square wave, sawtooth, reverse sawtooth, triangle wave, the ECG wave and noise wave, 1602 LCD menu, Intuitive keyboard, Section into the value: 1.10,100,1000,10000 Hz, The power automatically restore the last used configuration, Offset: 0.5pp-5Vpp, Amplitude amount: 0.5Vpp-14Vpp, Weight: 120g, Color: White, Package include: 1 x DDS Function Signal Generator, 1 x 9V 1A adapter, Contact Us- Our Support Team is Here For You! Our goal is to earn 5 star positive feedback on every sale! 1 or 2 Star DSR Ratings Destroy Our Company. We would appreciate the chance to correct any problems before posting anything other than positive feedback. We encourage our customers to contact With US in order to resolve any issues regarding the transaction before leave negative feedback on eBay. Please make sure to contact us before you leave feedback. We only accept payment transactions via our online checkout system. We don't collect your financial information. Only Pay pal ID& shipping info is required. International buyers are responsible for duties and customs fees. Our secure checkout system will give you a choice to pay with Paypal. Payment is required within 7 days of the e
$
22,500
Buy It Now
$95 Shipping
Condition: Seller refurbished
Location: Culver City,CA,USA
Excalibur Engineering. Inc. offers the highest quality refurbished test equipment in the industry. We also provide rentals. Calibration, and repairs of ... morecurrent& obsolete ATE equipment including HP/ Agilent, Tektronix, Fluke, Anritsu, Rohde& Schwarz, Aeroflex, Bruel& Kjaer, and hundreds of other manufactures. Anritsu MP1026A Bit Master Eye Pattern Analyzer 20 GHz. 10 Gbps with Options 002& 003 The Bit Master is a handheld eye pattern analyzer capable of sampling and displaying eye patterns or pulse patterns for high speed signals such as OC192. 10 Gbps Ethernet, and Fiber Channel. It provides convenient measurements for field or lab use and can be an excellent diagnostic tool for identifying sources of noise and jitter that degrade the signal quality. 800 MHz/ 400 MHz(half/full-channel) conventional timing. 4 M/ 2 M memory depth· 200 MHz transitional timing. 1 M memory depth· 200 MHz state analysis. 1 M memory depth· Condition– Used. Function checked on 9/15/2014! 30 Day Warranty· Options– 002: Clock Recovery Unit Option 003: Optical Interface Option· Accessories- All accessories sold with the unit are shown in the pictures o Power cord not included· Asset No. 70124 NO INTERNATIONAL BIDDING: NORTH AMERICAN BIDDERS ONLY! Warranty: For items that are sold with a warranty. Excalibur Engineering, Inc. will warrant the equipment to be as described and in working condition for the specified period. If the item is being sold with a warranty, the warranty period will be specified in the item description. The warranty is null and void if the cal void seals have been broken or removed. Returns: If an item is returned within the warranty period. Buyer is to pay all shipping costs for items being returned. Items must be postmarked within the warranty period, or the item cannot be returned. The warranty is null and void if the cal void seals have been broken or removed. Payments: We accept various forms of payment including credit cards. Please call our offices directly at 949-454-
$
75.04
Buy It Now
$0 Shipping
Condition: New
Location: Hebron,KY,USA
$
142.87
Buy It Now
$0 Shipping
Condition: New
Location: China
$
139.99
Buy It Now
$0 Shipping
Condition: New
Location: San Jose,CA,USA
$
193.11
Buy It Now
$0 Shipping
Condition: New
Location: Chicago,IL,USA
$
64.5
Buy It Now
$0 Shipping
Condition: New
Location: Chicago,IL,USA
$
13
Buy It Now
$0 Shipping
Condition: New
Location: Tooele,UT,USA
$
86.47
Buy It Now
$0 Shipping
Condition: New
Location: Perth Amboy,NJ,USA
$
88.14
Buy It Now
$0 Shipping
Condition: New
Location: Ontario,CA,USA
$
62.06
Buy It Now
$0 Shipping
Condition: New
Location: Israel
$
490
Buy It Now
$45 Shipping
Condition: Used
Location: Israel
$
475
Buy It Now
$39 Shipping
Condition: Used
Location: Israel
$
17,500
Buy It Now
$350 Shipping
Condition: Seller refurbished
Location: Culver City,CA,USA
 In