In 
 
Order by: 
Available to: 
Price: 
 - 
$
300.10
Buy It Now
$65.00 Shipping
Condition: Used
Location: Ukraine
P401 7 Unevalued resistance standard resistor. Coil- analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs. Device has the same or better characteristics: ... moreNominal Value: 10 Mohm; High Accuracy class: 0.005% Nominal voltage 100 V; Max voltage 150 V; MTBF 2.500 hours; The average service 10 years; Dimensions 115х125х260 mm; Weight 1.8 kg. Warranty 12 month. This device was also used in USSR and Russian army. So it has best quality. Longevity. And permanence characteristic. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +145-265usd) P4017 resistance standard resistor is analog device of such manufactures as LEEDS& NORTHRUP. ESI(Electro Scientific Industries) Honeywell, IET Labs, JAME G BIDDLE CO, GRAY INST, TEGAM, Guildline, Tektronix, Fluke and others. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Resistance standard P4017 designed to work in DC and AC circuits as exemplary and working electrical resistance standards in using conditions. Nominal resistance 10 7 Ohm Accuracy class 0.005 Resistance standard P4017 is designed to work in DC and AC circuits as exemplary and working electrical resistance standards in using conditions: ambient air temperature(20 ± 5) °C. Relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa(630-800 mm Hg) Type of climatic modification is YXL 4.1 according to GOST 15150, but at ambient air temperature(20 ± 5) °C. Resistance standard P4017 is nonrecoverable. Single-channel, single-functional device. Technical characteristics Basic parameters and OKP codes of standard P4017 are shown in table 1. Standard P4017 dimensions are not more than 115x125x260 mm.Weight is not more than 1.8 kg. Acceptable deviation of standard P4017 actual resistance value fr
$
334.99
Buy It Now
$65.00 Shipping
Condition: New – Open box
Location: Ukraine
P4013 Unovalued resistance standard resistor. Coil- analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs.But has the same or better characteristics: ... moreNominal Value: 1Mohm; High Accuracy class: 0.005% Nominal Voltage: 220V; Max Voltage: 700V; MTBF: not less than 30.000 hours; The average service: at least 10 years; Dimensions: 115x125x260mm; Weight: 1.8 kg. Warranty 12 month. This device was also used in USSR and Russian army. So it has best quality. Longevity. And permanence characteristic. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +145-265usd) P4013 resistance standard resistor is analog device of such manufactures as LEEDS& NORTHRUP. ESI(Electro Scientific Industries) Honeywell, IET Labs, JAME G BIDDLE CO, GRAY INST, TEGAM, Guildline, Tektronix, Fluke and others. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Measurement resistance coil P4013 designed to used as a single-valued electrical resistance standard(OMEC) in DC circuits. Nominal resistance 10 6 Ohm Accuracy class 0.005 General information about the devise Measurement resistance coil P4013 is designed to used as a single-valued electrical resistance standard(OMEC) in DC circuits. Operating conditions: ambient air temperature(20 ± 5) °C; relative humidity from 25 to 80% in operating temperature range; atmospheric pressure 84-106.7 kPa(630-800 mm Hg) Type of climatic modification YXL 4.1 according to GOST 15150-69. Measurement resistance coil P4013 belongs to nonrecoverable. Single-channel and single-function devices. Technical characteristics Basic parameters of coils P4013and OKP codes are shown in table. Permissible deviation of resistance coil P4013 actual value from nominal value at primary testing(at manufacturer releas
$
24.63
Buy It Now
$60.25 Shipping
Condition: New
Location: United Kingdom
Leaderman x15 Metal MCB RCD Miniature Circuit Breaker Lockout Lock Off Device.
$
21.23
Buy It Now
$62.33 Shipping
Condition: New
Location: United Kingdom
MOBILE_DESCRIPTION_HERE.
$
13.24
Buy It Now
$59.38 Shipping
Condition: New
Location: United Kingdom
MOBILE SUMMARY HERE.
$
11.91
Buy It Now
$60.43 Shipping
Condition: New
Location: United Kingdom
MOBILE SUMMARY HERE.
$
22.39
Buy It Now
Free Shipping
Condition: New
Location: Vietnam
Press the small button under the cannon to turn on the paddle and the water will slowly release and turn the paddle. Fill with water, press the button ... moreunder the cannon and water runs down from the opening.
$
399.99
Buy It Now
$70.00 Shipping
Condition: Used
Location: Ukraine
P40112 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Device ... moreis designed to transfer of electrical resistance values from standard Р40114 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. Nominal Value: 10 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 5 Ohm; S equential connection 10 7 Ohm; Nominal connection of 1 stage 10 6 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 3 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40112 1 General information about device 1.1. Resistance standards Р40112 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. 1.2. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40112 working conditions: ambient temperature(20 ± 5) ° C(for Р40115- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mmHg) 2 Technical characteristics 2.1. Main parameters of standard Р40112 are shown in Table 1. 2.2. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. 2.3. Standard P40112 are restorable. Repairable and multifunction devices. 2.4. Acceptable basic deviation limit of resistance standard Р40112( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmospheric pressure 84-106.7 k
$
585.00
Buy It Now
$110.00 Shipping
Condition: New – Open box
Location: Ukraine
Attenuator D3-35. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D3-35: Frequency range- 17.44-25.86 GHz; Initial attenuation- 0.3 dB; D3-35 attenuation measurement range– 0-70 dB; Maximum acceptable power– 0.3 Watt; KCBH- 1.2; High frequency path– 11.5x5.5mm; Dimensions– 315x270x210 mm; Weight- 5.5 kg Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D335. D3 35, D3-35. Д 335, д 3-35. Д3 35. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I will look through the technical documentation for the device and I will be happy to consult you. Also I may speak directly with
$
3999.45
Buy It Now
$190.00 Shipping
Condition: New – Open box
Location: Ukraine
High accuracy Standard Resistor R323 is a unique device designed for measuring and checking the fit of shunts and resistance standards. Verification of ... moreelectrical appliances in the bridge and potentiometer circuits DC. Technical characteristics of the instrument measuring the coil resistance R323: Resistance- 0.0001 Ohms( unique device) Accuracy class of the instrument measuring resistor R323- 0.05; Power: Nominal- 10W; Max- 100W; Current: Nominal– 320A; Max– 1000A; Cooling coil resistance measuring device R323- Oil-water; Ambient temperature- from +10 º C to +30 º C; Relative humidity- up to 80% Dimensions of the device measuring resistor R323– 375x210x304mm; Weight- 18 kg; Warranty: 12 month. This device was also used in USSR and Russian army. So it has best quality. Longevity. And permanence characteristics. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +145-265usd) Those resistance standards. Resistors are analog devices of such manufactures as LEEDS& NORTHRUP. ESI(Electro Scientific Industries) Honeywell, IET Labs, JAME G BIDDLE CO, GRAY INST, TEGAM, Guildline, Tektronix, Fluke and others. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. This device can be also named as: P323. P-323, P 323, R323, R-323, R 323,р323,р 323, р-323. Resistance standard, standard resistor, laboratory resistor, resistor, resistance, standard, laboratory resistor, precision resistors, ac dc standard resistor, reference divider, resistance calibrators, calibrators. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to conta
$
2899.99
Buy It Now
$15.00 Shipping
Condition: New – Open box
Location: Ukraine
P3031 Unavalued resistance standard resistor analog of LEEDS & NORTHRUP, ESI, Honeywell, IET Labs. Unambiguous electrical resistance standard P3031 is ... moredesigned to be used as working ,exemplary electrical resistance standard in DC circuits.
$
799.48
Buy It Now
$210.00 Shipping
Condition: New – Open box
Location: Ukraine
Average life service - is at least 10 years. Weight - is not more than 20 kg. Also we can provide other resistance, capacitance and inductance standards, ... moredecade box and other etalons. 2, as well asvibration frequency 30 Hz and an amplitude 0.4 mm.
$
949.99
Buy It Now
$35.00 Shipping
Condition: New – Open box
Location: Ukraine
P4030 or P4030 -M1 resistance standard resistor, coil - analog of LEEDS & NORTHRUP, ESI, Honeywell, IET Labs. Technical characteristics ofsingle-valued ... moreelectrical resistance standard Р4030М1 or P4030 .
$
599.34
Buy It Now
$110.00 Shipping
Condition: New – Open box
Location: Ukraine
Attenuator D3-34A. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D3-34A: Frequency range- 12.05 GHz– 17.44GHz; Accuracy-0.3dB(up to 50) 0.66dB(up to 60) 1.06(up to 70) Initial attenuation- 0.5 dB; D3-33A attenuation measurement range- 0dB- 70dB; Maximum acceptable power- 0.5 Watt; KCBH- 1.2( up to 12.05 GHz) 1.15( 12.3 GHz– 17.44GHz) High frequency path– 17 x 8 mm; Dimensions– 350x270x210mm; Weight- 5kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D334A. D3 34A, D3-3 4A. Д 334a, д 3-34a. Д3 34a. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I
$
119.17
Buy It Now
$25.00 Shipping
Condition: New – Open box
Location: Ukraine
P331 Coil. Unevalued resistance standard resistor. NEW. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 1000 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 1000 P331 100 8 20 2 20 10 0.1 0.025 0.032 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 1000 Ohm; Accuracy class 0.01 Electrical resistance coil P331 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P331 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P331 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not m
$
585.00
Buy It Now
$145.00 Shipping
Condition: New – Open box
Location: Ukraine
Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. Technical characteristics of device attenuator ... moreD3 -27 Accuracy - (0.01 +0.004 A), dB – up to50 dB, ( 0.2+0.04 (A -50)) dB- 50dB - 60dB;.
$
520.00
Buy It Now
$100.00 Shipping
Condition: New – Open box
Location: Ukraine
Attenuator D3-37. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D3-37: Frequency range- 37.5 GHz– 53. 57GHz; Initial attenuation- ≤ 1 dB; Accuracy- 0.01 dB or 0.02 AdB– up to 50; D3-37 Maximum acceptable power- 0.1 Watt; KCBH- 1.15; High frequency tract– 5.2 x 2.6mm; Dimensions– 146x150x235mm; Weight- 4kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D337. D3 37, D3-3 7. Д 337, д 3-37. Д3 37. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I will look through the technical documentation for the device and I will be happy to consult you. Also I may speak dir
$
600.00
Buy It Now
$65.00 Shipping
Condition: New – Open box
Location: Ukraine
P401 7 Unevalued resistance standard resistor. Coil- analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs. Device has the same or better characteristics: ... moreNominal Value: 10 Mohm; High Accuracy class: 0.005% Nominal voltage 100 V; Max voltage 150 V; MTBF 2.500 hours; The average service 10 years; Dimensions 115х125х260 mm; Weight 1.8 kg. Warranty 12 month. This device was also used in USSR and Russian army. So it has best quality. Longevity. And permanence characteristic. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +145-265usd) P4017 resistance standard resistor is analog device of such manufactures as LEEDS& NORTHRUP. ESI(Electro Scientific Industries) Honeywell, IET Labs, JAME G BIDDLE CO, GRAY INST, TEGAM, Guildline, Tektronix, Fluke and others. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Resistance standard P4017 designed to work in DC and AC circuits as exemplary and working electrical resistance standards in using conditions. Nominal resistance 10 7 Ohm Accuracy class 0.005 Resistance standard P4017 is designed to work in DC and AC circuits as exemplary and working electrical resistance standards in using conditions: ambient air temperature(20 ± 5) °C. Relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa(630-800 mm Hg) Type of climatic modification is YXL 4.1 according to GOST 15150, but at ambient air temperature(20 ± 5) °C. Resistance standard P4017 is nonrecoverable. Single-channel, single-functional device. Technical characteristics Basic parameters and OKP codes of standard P4017 are shown in table 1. Standard P4017 dimensions are not more than 115x125x260 mm.Weight is not more than 1.8 kg. Acceptable deviation of standard P4017 actual resistance value fr
$
949.56
Buy It Now
$70.00 Shipping
Condition: New – Open box
Location: Ukraine
P40113 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Resistance ... morestandard Р40113 d esigned: to transfer electrical resistance values from standard Р40113 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Nominal Value: 100 Mohm; Total measured Value: 1- 100 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 6 Ohm; S equential connection 10 8 Ohm; Nominal connection of 1 stage 10 7 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40113 General information about device Resistance standards Р40113 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40113 working conditions: ambient temperature(20 ± 5) ° C(for Р40113- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mm Hg) Technical characteristics Main parameters of standard Р40113 are shown in Table 1. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. Standard P40113 are restorable. Repairable and multifunction devices. Acceptable basic deviation limit of resistance standard Р40113( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmosphe
$
3999.00
Buy It Now
$150.00 Shipping
Condition: New – Open box
Location: Ukraine
P4067 Multivalued resistance standard transition resistor- analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs. But has the same or better characteristic: ... moreElectrical resistance transitional standard Р4067 is designed to transfer electrical resistance in dc measuring circuits. Nominal Value: 10 Gohm; High Accuracy class: 0.05% Nominal voltage 3000V: Parallel connection 1000 V; Series connection 3000V; Max voltage: Parallel connection 1000 V; Series connection 3000V; Type of the current: DC; MTBF: not less than 5000 hours; The average service: at least 10 years; Dimensions: 340x280x300mm; Weight: 12 kg; Warranty 12 month. Technical characteristics of electrical resistance transitional standard Р4067: Temperature– from 15 º C to 25 º C; Relative humidity- 65% ± 15% Atmospheric pressure- 100kPa ± 4kPa( 750mm Hg ± 30mm Hg) Accuracy class of electrical resistance transitional standard Р4067- 0.05; Nominal resistance- 10 8 Ohm. 10 10 Ohm; Electrical resistance transitional standards’ Р4067 basic error of electrical resistance transfer- 0.0010% Parallel connection of stages Consistent connection of stages Standard’s voltage Standard’s voltage nominal maximum nominal maximum 1000V 1000V 3000V 3000V Acceptable basic error of standard, in percentage from nominal resistance value does not exceed ± 0.05% Acceptable additional error of electrical resistance transitional standard Р4067 at ambient temperature range from 15 º C to 25 º C for every 5K is less than a half of acceptable basic error; Dimensions– 340x280x300mm; Weight- is not more than 12kg; Mean time between failures of electrical resistance transitional standard Р4067- is not less than 5000 hours. This device was also used in USSR and Russian army. So it has the best quality. Longevity. And permanence characteristic. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +14
$
600.00
Buy It Now
$65.00 Shipping
Condition: New – Open box
Location: Ukraine
P4016 Unevalued resistance standard resistor. Coil- analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs. Device has the same or better characteristics: ... moreNominal Value: 1 Mohm; High Accuracy class: 0.005% Nominal voltage 100 V; Max voltage 150 V; MTBF not less than: 2.500 hours; The average service at least 10 years; Dimensions 115х125х260 mm; Weight 1.8 kg. Warranty 12 Month. This device was also used in USSR and Russian army. So it has best quality. Longevity. And permanence characteristic. Condition: NEW(not used. But from an old stock) Tested and 100% workable. If necessary. The device can be calibrated and provided with the calibration certificate from Government Standardization Institute( +145-265usd) P4016 resistance standard resistor is analog device of such manufactures as LEEDS& NORTHRUP. ESI(Electro Scientific Industries) Honeywell, IET Labs, JAME G BIDDLE CO, GRAY INST, TEGAM, Guildline, Tektronix, Fluke and others. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Resistance standard P4016 designed to work in DC and AC circuits as exemplary and working electrical resistance standards in using conditions. Nominal resistance 10 6 Ohm Accuracy class 0.005 Resistance standard P4016 is designed to work in DC and AC circuits as exemplary and working electrical resistance standards in using conditions: ambient air temperature(20 ± 5) °C. Relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa(630-800 mm Hg) Type of climatic modification is YXL 4.1 according to GOST 15150, but at ambient air temperature(20 ± 5) °C. Resistance standard P4016 is nonrecoverable. Single-channel, single-functional device. Technical characteristics Basic parameters and OKP codes of standard P4016 are shown in table 1. Standard P4016 dimensions are not more than 115x125x260 mm. Weight is not more than 1.8 kg. Acceptable deviation of standard P4016 act
$
983.00
Buy It Now
$85.00 Shipping
Condition: New – Open box
Location: Ukraine
Attenuator D3-36A. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Attenuators D3- 36A are designed to reduce calibrated high-frequency signal in waveguides. Reference optical system can increase measurement reliability from devices scale. Accuracy attenuation provided by metrological means is guaranteed for all frequency and attenuation ranges. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D3-36A: Attenuators D3- 36A are designed to reduce calibrated high-frequency signal in waveguides. Reference optical system can increase measurement reliability from devices scale. Accuracy attenuation provided by metrological means is guaranteed for all frequency and attenuation ranges. Frequency range. GHz Initial attenuation. DB Measurement attenuation limits. DB Accuracy. DB 25. 86-37. 5 1 0-70 dB 0.41(up to 50) 0.9(up to 60) 1.41(up to 70) Maximum acceptable power. Watt KCBH High frequency- tract. Mm Dimensions. Mm; weight. Kg 0. 3 1. 2 7. 2 x 3. 4 257 x 270 x 210; 5. 5 Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your paym
$
699.99
Buy It Now
$70.00 Shipping
Condition: New – Open box
Location: Ukraine
P40114 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics. Device ... moreis designed to transfer of electrical resistance values from standard Р40114 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40114( MMEC) in measuring DC circuits. Nominal Value: 1 Gohm; Total measureg range: 0.01-1GOhm; High Accuracy class: 0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 7 Ohm; S equential connection 10 9 Ohm; Nominal connection of 1 stage 10 8 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years; Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40114 1 General information about device 1.1. Resistance standards Р40114 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40114( MMEC) in measuring DC circuits. 1.2. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40114 working conditions: ambient temperature(20 ± 5) ° C(for Р40115- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mmHg) 2 Technical characteristics 2.1. Main parameters of standard Р40114 are shown in Table 1. 2.2. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. 2.3. Standard P40114 are restorable. Repairable and multifunction devices. 2.4. Acceptable basic deviation limit of resistance standard Р40114( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% a
$
495.00
Buy It Now
$13.51 Shipping
Condition: For parts or not working
Location: Milpitas, United States
Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc ... moreGE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
115.00
Buy It Now
$35.00 Shipping
Condition: New – Open box
Location: Ukraine
Attenuator D5-21. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D5-21: Frequency range– 8.3 GHz- 11. 55 GHz; Initial attenuation- 1 dB; D5-20 Attenuation measurement limits- 1 dB- 30 dB; Accuracy- 1.5 dB(up to 15dB) 10% up to 30 dB) Maximum acceptable power- 0.5 Watt; KCBH- 1.08; High frequency tract– 28.5x12.5mm; Dimensions– 158x98x101mm; Weight- 0.93 kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D521. D 521. D-5 21. Д 521, д- 521. Д5 21. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I will look through the technical documentation for the device
$
28.16
Buy It Now
$43.64 Shipping
Condition: Neu
Location: Hong Kong SAR China
Up for sale is 5 pieces TDA1545A. 75pt. 75pt. 75pt" width="159">. Audio Video Accessory. Mini Switch / Selector. Soldering Rework station. Soldering Station. ... moreLED products. So that we canavoid make mistake.
$
550.00
Buy It Now
$70.00 Shipping
Condition: Used
Location: Ukraine
P40113 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Resistance ... morestandard Р40113 d esigned: to transfer electrical resistance values from standard Р40113 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Nominal Value: 100 Mohm; Total measured Value: 1- 100 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 6 Ohm; S equential connection 10 8 Ohm; Nominal connection of 1 stage 10 7 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40113 General information about device Resistance standards Р40113 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40113 working conditions: ambient temperature(20 ± 5) ° C(for Р40113- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mm Hg) Technical characteristics Main parameters of standard Р40113 are shown in Table 1. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. Standard P40113 are restorable. Repairable and multifunction devices. Acceptable basic deviation limit of resistance standard Р40113( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmosphe
$
250.00
Buy It Now
$90.00 Shipping
Condition: New – Open box
Location: Ukraine
Attenuator D3-32A. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D3-32A: Frequency range- 6.85 GHz– 9.93 GHz; Initial attenuation- 0.5 dB; D3-32A attenuation measurement range- 0dB- 70dB; Maximum acceptable power- 0.5 Watt; KCBH- 1.2( up to 7.4 GHz) 1.15(7.4 GHz– 9.93GHz) High frequency path– 28.5 x 12.6 mm; Dimensions– 596x270x210mm; Weight- 6kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D332A. D3 32A, D3-3 2A. Д 332a, д 3-32a. Д3 32a. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I will look through the technical documentation for the device an
$
360.00
Buy It Now
$90.00 Shipping
Condition: Used
Location: Ukraine
Standard P40111 are restorable, repairable and multifunction devices. Resistance standard’s P40111 ( MPEC)acceptable resistance change (instability )does ... morenot exceed values inp.2.4 and 2.5. after a yearfrom the date of first attestation.
$
480.00
Buy It Now
$70.00 Shipping
Condition: New – Open box
Location: Ukraine
Standard P40111 are restorable, repairable and multifunction devices. Resistance standard’s P40111 ( MPEC)acceptable resistance change (instability )does ... morenot exceed values inp.2.4 and 2.5. after a yearfrom the date of first attestation.
$
983.99
Buy It Now
$65.00 Shipping
Condition: New – Open box
Location: Ukraine
P4018 Unevalued resistance standard resistor, coil - analog of LEEDS & NORTHRUP, ESI, Honeywell, IET Labs. Resistance standard P4018 designed to work ... morein DC and AC circuits as exemplary and working electrical resistance standards in using conditions.
$
339.99
Buy It Now
$65.00 Shipping
Condition: New – Open box
Location: Ukraine
P4023 Unovalued resistance standard resistor, coil - analog of LEEDS & NORTHRUP, ESI, Honeywell, IET Labs. Permissible resistance changes of coil P4023 ... moreper year (instability) do not exceed ± 0.005%.
$
199.99
Buy It Now
$65.00 Shipping
Condition: New – Open box
Location: Ukraine
Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. Power coefficient. Nominal load. Device is used ... moreat an ambient temperature from 10 º C to 35 ° C and relative humidity up to 80%;.
$
271.39
Buy It Now
Free Shipping
Condition: New
Location: 宝安区, China
We apply comprehensive quality check and testing before dispatching. Sydney: 11:00-21:00 | New York: 20:00-08:00.
$
20.18
Buy It Now
Free Shipping
Condition: New
Location: 宝安区, China
236.72 USD.
$
3950.00
Buy It Now
$350.00 Shipping
Condition: Used
Location: South Korea
Kikusui PCR 500 Regulated Single Phase 0-500VA 0-500Hz AC Power Supply. We have powered up the unit and adjusted the Hz out and the AC out with no problems. ... moreBut we have not bench tested with the proper equipment. We are not qualified to test this type of equipment. The front left handle is also some what loose. Output Voltage Ranges 1 to 140 or 2 to 280(100V/200V Range) Output Power 500 VA, Frequency 5 Hz to 500 Hz, Line Regulation Stability ±0.1% max. Load Regulation Stability ±0.1%V/±0.2V(100V/200V Range) Waveform Distortion 0.5% max. Efficiency 50% Weight 110.3 lbs. 50kg) Shipping within the continental USA=$84.00 via Freight carrier. If you wish to use your own freight carrier. Or account, we will charge a $20.00 packaging fee to secure your purchase for freight.
$
685.59
Buy It Now
Free Shipping
Condition: New
Location: 宝安区, China
For 2711P-T7C22A9P-B protective film + touchpad 2711P-T7C22A9P-B 5pin. XBTF011110 button panel XBTF011110 For new. We apply comprehensive quality check ... moreand testing before dispatching. Sydney: 11:00-21:00 | New York: 20:00-08:00.
$
5.93
Buy It Now
$43.64 Shipping
Condition: Neu
Location: Hong Kong SAR China
Up for sale is 1 piece WT6802. RF Transistor. Audio Video Accessory. IC for notebook repairing. Mini Switch / Selector. Soldering Rework station. Soldering ... moreStation. LED products.
$
129.73
Buy It Now
$25.00 Shipping
Condition: Used
Location: Ukraine
P331 Coil. Unevalued resistance standard resistor. USED. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 100 Ohm. For sale is one coil) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. I Also I had new devices please take a look them by the link: http:stores.ebay.com/electro-radio-device-high-precision/Resistance-Standards-Boxes-i.html?fsub=3003745013. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 100 P331 100 8 20 2 20 10 0.1 0.025 0.1 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal
$
5.07
Buy It Now
$43.64 Shipping
Condition: Neu
Location: Hong Kong SAR China
Up for sale is 1 piece TDA1387T/N1. Audio Video Accessory. Mini Switch / Selector. •Minimum order quantity is only one pieces up. Handling Fees UK, Germany. ... moreIMPORTANT NOTICE. Condition : NEW.
$
5.92
Buy It Now
$43.64 Shipping
Condition: Neu
Location: Hong Kong SAR China
Up for sale is 1 piece TDA1545A. Mini Switch / Selector. LED products. We will make sure give you a satisfactory answer. Choose us is your right choice! ... moreSo that we can avoid make mistake. Kindly Reminder.
$
199.99
Buy It Now
$65.00 Shipping
Condition: New – Open box
Location: Ukraine
I54M are designed to operate indoors at an ambient temperature of + 10°C to 35°C and a relative humidity of 80% at a temperature of 25°C. Also we can ... moreprovide other resistance, capacitance and inductance standards, decade box and other etalons.
$
51.03
Buy It Now
$5.00 Shipping
Condition: New
Location: Seaside Park, United States
Common Mispellings for DR4180RIBM:418O 41B0 4L80 DR4180RI8M DR418ORIBM DR41B0RIBM DR4L80RIBM. MOTOROLA 4180. Mfg:Motorola Incorporated. 65+ Countries. ... more3000+ AVL Qualifications. INDUSTRY EXPERIENCE. Inspectors Certified to IDEA-ICE-3000 Professional Inspector Certification.
$
227.04
Buy It Now
Free Shipping
Condition: New
Location: 宝安区, China
Treadmill Display Panel Film For HORIZON TREO Tempo T81 82 83 85 33 35 57 New. Sydney: 11:00-21:00 | New York: 20:00-08:00. 328.55 USD. We apply comprehensive ... morequality check and testing before dispatching.
$
139.55
Buy It Now
Free Shipping
Condition: New
Location: 宝安区, China
We apply comprehensive quality check and testing before dispatching.
$
120.00
Buy It Now
Condition: Used
Location: 성남시, South Korea
(zip code : 13 501 ). We have our own test laboratory and experienced Engineers. We are Authorized Partner/Distributor of major manufactures like Anritsu,Keysight,Kikusui,Fluke,Hioki ... moreand so on. (zip code : 13501).
$
130.00
Buy It Now
Condition: New – Open box
Location: 성남시, South Korea
(zip code : 13 501 ). We have our own test laboratory and experienced Engineers. We are Authorized Partner/Distributor of major manufactures like Anritsu,Keysight,Kikusui,Fluke,Hioki ... moreand so on. We are willing to respond to your inquiry.
$
20.25
Buy It Now
Condition: New
Location: Hayward, United States
ROR does not apply to rental orders. Mueller Electric BU-2241-D-48- , BU-60TBO, BU-62- , BU-00230- , BU-00225- , BU-00207- Test Leads. Top Dog Test is ... morecorporate friendly we understand the traditional acquisition and capital approval process.
$
495.00
Buy It Now
$13.51 Shipping
Condition: Used
Location: Milpitas, United States
Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc ... moreGE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
495.00
Buy It Now
$13.51 Shipping
Condition: Used
Location: Milpitas, United States
Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc ... moreGE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
295.00
Buy It Now
$13.51 Shipping
Condition: For parts or not working
Location: Milpitas, United States
Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc ... moreGE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
650.00
Buy It Now
$10.45 Shipping
Condition: For parts or not working
Location: Milpitas, United States
Brooks 5964-EP series MFC, 300 SCCM, NF3 Gas. Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech ... moreGaston Gates GC Valves GD California GE Fanuc GE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
299.99
Buy It Now
$13.93 Shipping
Condition: For parts or not working
Location: Milpitas, United States
Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc ... moreGE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
250.00
Buy It Now
$13.93 Shipping
Condition: For parts or not working
Location: Milpitas, United States
Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc ... moreGE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
650.00
Buy It Now
$13.93 Shipping
Condition: For parts or not working
Location: Milpitas, United States
Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc ... moreGE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
250.00
Buy It Now
$13.93 Shipping
Condition: For parts or not working
Location: Milpitas, United States
Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc ... moreGE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
250.00
Buy It Now
$13.93 Shipping
Condition: For parts or not working
Location: Milpitas, United States
Fastcom Faulhaber Federal Pioneer Federal Products Co. Futaba Futurestar Galil Motion GaSonics Gast GasTech Gaston Gates GC Valves GD California GE Fanuc ... moreGE General Electric GE Industrial Services Gems Sensors GEMU General Monitors General Precision General Scanning Genie Industries Genmark Automation GenRad Genwac Georg Fischer Geotest Gespac GF Signet Glassman Glentek Global Laser Gluton West Go Inc.Gould GPI General Precision GPI General Precision Inc.
$
115.00
Buy It Now
$35.00 Shipping
Condition: New – Open box
Location: Ukraine
Attenuator D5-20. Analog of Lutron. Advantest. Avtech, HP Agilent. NoiseCom, General Radio. Boonton, Anritsu, Fluke and general Electric, but has the ... moresame or better characteristics. This device can be used for wide measurement range. Condition: NEW(not used. An old stock) Tested and 100% workable. If necessary. We can provide calibration certificate from Government standardization institute(+145-265usd) Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. Also we can provide other resistance. Capacitance and inductance standards, decade box and other etalons. If you haven’t found the needed item in my listing. Please contact me. I’ll try to help you. Technical characteristics of device attenuator D5-20: Frequency range- 11.55 GHz- 17. 15 GHz; Initial attenuation- 1 dB; D5-20 Attenuation measurement limits- 1 dB- 30 dB; Accuracy- 1.5 dB(up to 15dB) 10% up to 30 dB) Maximum acceptable power- 0.5 Watt; KCBH- 1.08; High frequency tract– 17x8mm; Dimensions– 158x98x101mm; Weight- 0.78 kg. Warranty 12mounth. Delivery term This device is available in stock right now. I can send it at one day after your payment. But due to the fact. That this device is of high precision, it should be calibrated before shipping. I calibrate and test all my devices. Calibration time may take from 1-14 days. depends on device. Usually it takes 3 days. I can send it at one day after your payment but without any calibration. Please chose. I can supply you such device of fresh years of manufacture 2011-2012. But the price of such device will be approximately 20-40% higher or more. This device also can be named as: D520. D 520. D-5 20. Д 520, д- 520. Д5 20. Photos If necessary we can take photos of a device from various angles. Technical Documentation In case you didn't find in technical specifications for the device all necessary information you are interested in. Feel free to contact me. I will look through the technical documentation for the device and
1 2 3 4 5 6 7 8 9 10
 In