In 
 
Order by: 
Available to: 
Price: 
 - 
$
5.89
Buy It Now
Free Shipping
Condition: New
Location: China
Reverse Osmosis RO Water System, Water Purifier, Pure Water Machine, Water Dispenser ETC. -Suitable for all Water Purifiers Filters, Reverse Osmosis Water ... moreSystems. 1/3 x Water Filter Quick Fittings.
$
4.12
Buy It Now
Free Shipping
Condition: New
Location: China
$
2.49
Buy It Now
$4.99 Shipping
Condition: New
Location: China
Features: 3:1 high shrink ratio, insulation sealed and waterproof. Shape: Ø1.6-9.5 mm round, Ø12.7mm and above are flat. Full shrinkage temperature: 125℃. ... moreInitial shrinkage temperature: 70℃ ~ 80℃.
$
11.00
Buy It Now
Free Shipping
Condition: New
Location: Humboldt, United States
Product Type Cable Clamp. Material Nylon 6.6. You are receiving one bag of 100. Excellent communication! Note Not available in Japan. Overall Height (In.). ... moreOverall Length (In.). Overall Width (In.).
$
31.89
Buy It Now
Free Shipping
Condition: New
Location: United States
(350PCS solder seal wire connectors+200pcs free heat shrink tubes). FAST AND EASY PROCESS - 1 Step solder and seal process for all your connections. When ... moreheat is applied, polyolefin tubing reduces in size and adhesive flows inside the insulation.
$
10.76
Buy It Now
Free Shipping
Condition: New
Location: China
There is a 1A/2A current button to switch 1A or 2A current discharging. Type: Fixed Resistor. Working with indicator light, switch button marked current ... morevalue, to indicate the current mode at present.
$
12.57
Buy It Now
$5.00 Shipping
Condition: Brand New
Location: Australia
Without any impact on the performance of the product. 1 x EGT K Type Thermocouple. 【High quality 】The yellow male plug of the front end opening, high ... moretemperature resistance, insulation.The material of the probe is made of stainless steel, high strength, corrosion resistance and wear resistance.
$
45.66
Buy It Now
Free Shipping
Condition: New
Location: Riceville, United States
P/N: MS27499E18A35SA. Part Number: MS27499E18A35SA. 66 Position. With Sockets (66) crimp. - May exhibit signs of "shelfwear". MIL-DTL-38999 Series II.
$
11.74
Buy It Now
Free Shipping
Condition: New
Location: China
Ultra-Bright Pre-Wired LEDs and Light Emitting Diode Holders SetDimension & Specification Index:Lens Type: 10mm Round TopLight Color: BlueForward Voltage: ... moreDC 12VWire Length (Approx.): 20cm (7.87")LED Holder Overall Size (D*H): 16 x 18mm (0.63" x 0.71")Mounting Hole Diameter: 14mm (0.55")Package Content: 10 x Pre-wired LEDs, 10 x LED HoldersWide UsageThese pre-wired LED lights set can be widely used in RC helicopter, quadcopters, drone, robot decor, walkway lighting for building model, even holiday decoration, and any DIY project you can imagine.For Direct Mount-These led lights are wired with a build-in resistor and coated with tin at the end of the wire, which means they are ready for direct use.-Mount the LED in the socket and install the socket directly in the pre-drill hole.
$
12.19
Buy It Now
Free Shipping
Condition: New
Location: China
Provide these Ultra-Bright Lights with 1/4W Metal Film Resistors, this kit is for Most Common Use.Lens Type: 3mm Round Top with Edge, Frosted DiffusedLight ... moreColor: Multicolor Slow-FlashingForward Voltage: DC 3.0-3.2VForward Current: 20mAResistance: 430 Ohm, +/-1%Polarity: Anode - Longer Pin, Cathode - Shorter PinPackage Includes: 100 x LED Lights, 100 x 430 Ohm ResistorsAbout Out Item:- Energy saving and low power consumption.- This LED and Resistor Kit can be widely used in DIY light projects, industrial, camera, DIY computing, robot and costume design.- We offer 3mm/5mm/8mm/10mm lamp bead in different color according to your using purpose.Recommended Circuit:1. 1 piece LED + 1 piece 430 Ohm resistor connect in series with 12V voltage input (or 6V-9V input with less brightness);2.
$
3.42
Buy It Now
Free Shipping
Condition: New
Location: China
$
8.38
Buy It Now
Free Shipping
Condition: New
Location: China
When the right “OUT” LED light, it shows output, the left “IN” LED shows input. Input reverse polarity protection. Output current:2A. Built in output ... moreshort protection function. is provided once the item is dispatched.
$
18.39
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
PIC GAUGES. Stainless Steel. Vollrath N7012 Aluminum Fry Pan,Non-Stick,12 In. C.H. Hanson 10149 Stencil Set,Letters & Numbers,Brass. Hi-Tech Duravent ... more0656-0300-0001 Ducting Hose,3 In. Id,25 Ft. L,Pvc.
$
2.79
Buy It Now
Free Shipping
Condition: New
Location: China
$
13.00
Buy It Now
Free Shipping
Condition: New
Location: China
Ultra-Bright Pre-Wired LEDs and Light Emitting Diode Holders SetDimension & Specification Index:Lens Type: 10mm Round TopLight Color: PinkForward Voltage: ... moreDC 12VWire Length (Approx.): 20cm (7.87")LED Holder Overall Size (D*H): 16 x 18mm (0.63" x 0.71")Mounting Hole Diameter: 14mm (0.55")Package Content: 10 x Pre-wired LEDs, 10 x LED HoldersWide UsageThese pre-wired LED lights set can be widely used in RC helicopter, quadcopters, drone, robot decor, walkway lighting for building model, even holiday decoration, and any DIY project you can imagine.For Direct Mount-These led lights are wired with a build-in resistor and coated with tin at the end of the wire, which means they are ready for direct use.-Mount the LED in the socket and install the socket directly in the pre-drill hole.
$
11.74
Buy It Now
Free Shipping
Condition: New
Location: China
Ultra-Bright Pre-Wired LEDs and Light Emitting Diode Holders SetDimension & Specification Index:Lens Type: 10mm Round TopLight Color: RedForward Voltage: ... moreDC 12VWire Length (Approx.): 20cm (7.87")LED Holder Overall Size (D*H): 16 x 18mm (0.63" x 0.71")Mounting Hole Diameter: 14mm (0.55")Package Content: 10 x Pre-wired LEDs, 10 x LED HoldersWide UsageThese pre-wired LED lights set can be widely used in RC helicopter, quadcopters, drone, robot decor, walkway lighting for building model, even holiday decoration, and any DIY project you can imagine.For Direct Mount-These led lights are wired with a build-in resistor and coated with tin at the end of the wire, which means they are ready for direct use.-Mount the LED in the socket and install the socket directly in the pre-drill hole.
$
5.11
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
PIC GAUGES. Rothenberger 70116 18 In L 2 1/2 In Cap. Aluminum Offset Pipe Wrench. Wiegmann B161406ch Nema 12, 13 16.0 In H X 14.0 In W X 6.0 In D Wall ... moreMount. & Recepticles. Electrical Outlets. Light Industrial.
$
49.96
Buy It Now
Condition: New
Location: Baton Rouge, United States
Manufacturer: Acopian.
$
1.63
Buy It Now
Free Shipping
Condition: New
Location: China
$
3.77
Buy It Now
$3.20 Shipping
Condition: New
Location: China
Output current: 2A. With overheat protection and short circuit protection. High efficiency and low ripple.
$
8.24
Buy It Now
Free Shipping
Condition: New
Location: China
4 Pieces Silver Tone Plastic Potentiometer Rotary Control Knobs Caps 17x23mm More More More More More Add my Store to your Favourites and receive my email ... morenewsletters about new items and special promotions! General Interest Description Shipping& Payment Return Other Term& Attention Specification: Product Name, Rotary Knob, Main Material, Plastic, Color, Black. Silver Tone, Fit for Knurled Shaft Diameter, 5mm/0.2" Overall Size, 23 x 17mm/ 0.9" x 0.7"D*H) Weight, 22g, Package Included, 4 x Potentiometer Rotary Knobs, Descriptions: Silver Tone Plastic Potentiometer Rotary Control Knobs Caps 17x23mm, Import duties. Taxes and charges are not included in the item price or shipping charges. Buyers are responsible for these charges. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Note that delivery times may vary. Particularly during peak periods or inclimate weather conditions. All items will be dispatched from our warehouse in China or Hong Kong directly. Due to Custom restrictions. We do not ship lighters to US We cannot ship on weekends and we do not offer Saturday. Sunday or holiday delivery. All our items will be shipped to buyer's PayPal address. Please confirm your address on PayPal before you bid We ONLY accept Paypal. We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended. Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt. If you would like to return your product(s) for repair/ replacement/ refund. Please kindly contact our customer service representatives via email for an authorized? RMA number. Your returned product(s) will not be processed without a completed RMA. Buyers are responsible for the returning shipping costs under any circumstances. The photos are just for illustration purposes only. No sales tax is required. If. For any reason you are not satis
$
8.32
Buy It Now
Free Shipping
Condition: New
Location: China
Provide these Ultra-Bright Lights with 1/4W Metal Film Resistors, this kit is for Most Common Use.Lens Type: 5mm Round Top with Edge, CleanLight Color: ... moreClean Bi-Color (Red & Lime Green)Forward Voltage: DC 1.8-2.0VForward Current: 20mAResistance: 430 Ohm, +/-1%Polarity: Common CathodePackage Includes: 25 x LED Lights, 25 x 430 Ohm ResistorsAbout Out Item:- Energy saving and low power consumption.- This LED and Resistor Kit can be widely used in DIY light projects, industrial, camera, DIY computing, robot and costume design.- We offer 3mm/5mm/8mm/10mm lamp bead in different color according to your using purpose.Recommended Circuit:1. 1 piece LED + 1 piece 430 Ohm resistor connect in series with 12V voltage input (or 6V-9V input with less brightness);2.
$
8.40
Buy It Now
$0.48 Shipping
Condition: New
Location: 秀屿区, China
530pcs 2: 1 heat shrink tubing. 80pcs x 1.5 45mm yellow heat shrink tube. 80pcs x 2.0 45mm blue heat shrink tube. 80pcs x 2.0 45mm black heat shrink tube. ... more60pcs x 3.0 45mm Green Heat Shrink Tube.
$
3.12
Buy It Now
$3.20 Shipping
Condition: New
Location: China
When the right “OUT” led light, it shows output, the left “IN” led show input. 3 、 Output current:2A. 6 、 Built in output short protection function. 5 ... more、 Input reverse polarity protection. How to adjust the accuracy?.
$
8.79
Buy It Now
Free Shipping
Condition: New
Location: China
1 Battery Protection Board. Enhanced version: suitable for electric drill with starting current below 120A and power below 260W. Balanced version: suitable ... morefor electric drills with starting current below 120A and power below 260W, with balanced charging function.
$
389.00
Buy It Now
$16.10 Shipping
Condition: New – Open box
Location: Biloxi, United States
If you are looking at it, you know what it is and how much they cost new. The item may have flaws and/or defects if this is a used item.
$
132.35
Buy It Now
Free Shipping
Condition: Neu
Location: China
Die Empfindlichkeit des thermischen Widerstands und des Widerstands gegenüber externem Erregungsausgangsstrom wird reduziert. Erhöhen Sie die Leistung ... moreund die Messgenauigkeit. For sowohl konstante als auch nicht konstante Widerstandsmessmethode, wodurch die Verwendung des Instruments erweitert wird. Es dauert ungefähr 7-15 Werktage nach Australien; ungefähr 10-30 arbeitstage zu anderen ländern. Die Transitzeit kann sich aufgrund des schlechten Wetters und der Zollkontrolle etwas verzögern. Wenn Sie Ihren Artikel nicht innerhalb von 30 Werktagen nach Abschluss der Zahlung erhalten, kontaktieren Sie uns bitte umgehend for weitere Unterstützung. Wir streben for 100% Kundenzufriedenheit! Positives Feedback ist uns sehr wichtig. Wenn Sie Fragen haben, können Sie uns gerne über "Frage an den Ver.
$
3.88
Buy It Now
$2.24 Shipping
Condition: New
Location: China
N capacity lithium batteries. Using the Japanese precision protection IC, VISHAY, AOS, IR and other high quality MOSFET, FR-4 low temperature coefficient ... moreof plate, well-designed, comprehensive test compact size.
$
5.92
Buy It Now
$2.83 Shipping
Condition: New
Location: China
$
3.96
Buy It Now
$3.20 Shipping
Condition: New
Location: China
Extended temperature probe, effective solution to a temperature module. DF Do not set to 0, otherwise it will be black. 2, the temperature function range: ... more-40 to 120 degrees, resolution 0.1 degrees.
$
127.44
Buy It Now
$3.75 Shipping
Condition: Neu
Location: China
Thickness Gauge 1. Product model: SW-6310A SW-6310B (optional). SW-6310B: Built-in lithium battery 3.7V850mAh. High-definition large-screen display, the ... morereading is clear and easy to identify. USB cable 1.
$
8.06
Buy It Now
Free Shipping
Condition: New
Location: China
An excellent wristband for electricians or IC/PLCC workers. The inner layer of the elastic band is woven with anti-static conductive yarn, and the outer ... morelayer is woven with ordinary yarn. Wearing this anti-static wrist strap can safely remove the static electricity generated in the body within 0.1 seconds.
$
1.57
Buy It Now
$3.50 Shipping
Condition: New
Location: China
ESP8266 Serial WIFI Module Communite Forum>> Detail about ESP8266. Support 3 modes: AP, STA, AP+STA. I2S interface for high fidelity audio applications. ... moreSupports Bluetooth co-existence interface. >>>> Translate data sheet.
$
6.49
Buy It Now
$1.30 Shipping
Condition: New
Location: China
Waterproof: IP66. Waterproof and dustproof IP66 junction box. Can be installed horizontally and vertically as an external junction box to hide electrical ... moreconnections around your house and around your property.
$
6.49
Buy It Now
$4.75 Shipping
Condition: New
Location: Anaheim, United States
Manufacturer: NEC CEL. Mounting type: SMD. High Output Power: +26dBm TYP at Vds=3V.
$
4.37
Buy It Now
$3.60 Shipping
Condition: New
Location: China
Over-Power Protection:Module will turn OFF output automatically if output power is more then 15W. It will display ‘-OP-’. User need reduce load power ... moreand then press ‘ON/OFF’ button. It just can input DC 5V.
$
18.99
Buy It Now
$4.00 Shipping
Condition: New
Location: China
Model: BA11. Button Color: White.
$
7.56
Buy It Now
$21.44 Shipping
Condition: New
Location: NOTTINGHAM, United Kingdom
Thus they provide increased attenuation with frequency over conventional decoupling capacitors. Capacitance (pF) Effective Frequency Ranges (MHz) : Manu. ... more100V Series. 10000 7-1000 DSS6NZ82A103Q55B. Note: See 'key characteristics' table for details of effective frequency ranges.
$
10.27
Buy It Now
Free Shipping
Condition: Neu
Location: China
AC/DC Spannungswandler Spannungsregler Modul Buck AC 10-28V To DC 12V 3A S9. 12V Auf 19V DC-DC Step Up Boost Spannungswandler 5A 95W Industrie-Netzteile. ... more12V Auf 48V DC-DC Step Up Boost Spannungswandler 3A 145W Industrie-Netzteile OA.
$
9.00
Buy It Now
$3.30 Shipping
Condition: New
Location: China
Quantity: 620pcs. This is a 620 pcs kit with a variety of connectors 1x1 pin to 2x6 pins. The quality is great, these can be used for computer building. ... more200pcs Male Crimp Pins. 200pcs Female Crimp Pins.
$
5.19
Buy It Now
Free Shipping
Condition: New
Location: 龙岗区, China
1x 6S 15A Lithium protection board. Main circuit conduction resistance: ≤20mΩ. Short circuit protection Release condition: disconnect negative open. Overcurrent ... moreprotection release condition: Disconnect the load.
$
7.03
Buy It Now
Free Shipping
Condition: New
Location: China
Round Top Pre-Wired LEDs, Ultra-Bright Flashing Light with Stable Performance!Lens Type: 5mm Round Top with EdgeLight Color: OrangeLight Type: FlashingForward ... moreVoltage: 12VForward Current: >20mAWire Length (Approx.): 20cm (7.87")Package Includes: 5 x Pre-wired LEDsAbout Our Item:-These pre-wired LED lights can be widely used in hobby lighting, industrial, camera, DIY computing and costume design.-Moreover, these led lights are wired with a build in resistor and coated with tin at the end of the wire, that means they are ready for direct use.-We offer 3mm/5mm/8mm/10mm lamp bead in different color according to your using purpose. Note:1. Please allow 1-3cm error due to manual measurement.2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object.
$
277.50
Buy It Now
$35.00 Shipping
Condition: New
Location: 中原区, China
Winsen ZE11 Electrochemical Module general-purpose and high-performance Gas Detection Module Temperature compensation and excellent linear output. ZE11 ... moreis a general-purpose and high-performance electrochemical module.
$
5.99
Buy It Now
$3.20 Shipping
Condition: New
Location: China
3: MODBUS RTU Command support 03 06 function code. 7 :Under the MODBUS command mode, it can support up to 247 devices in parallel. RS485 Remote monitoring;. ... moreInterface introduction.
$
8.77
Buy It Now
Free Shipping
Condition: New
Location: 荔湾区, China
2pcs Plastic Inflation Plugs/Shell Liner Block Fit All Cow Goat Sheep Milker. 29 Function Tread Bracelet for Travel Outdoor Stainless Multi-Tool Pocket ... moreSilver. Size:approx 5.7 x 2 x 1cm(LxWxH). With overheat protection and short circuit protection.
$
4.36
Buy It Now
$3.50 Shipping
Condition: New
Location: China
(3) Output attenuation: 6dB. 1PC×RF Microwave Resistance Splitter Power Divider. 7) System impedance: 50 ohms. 2) Power frequency: DC-5G. 6) Connector ... moreform: SMA-K (standard female head, outer screw inner hole).
$
20.71
Buy It Now
Free Shipping
Condition: New
Location: China
Micro USB Female Socket Connector. Micro USB 5 pin Female, Easy connect pins design. Type: Micro USB Female. Compact, lightweight, and durable. Very easy ... moreto use. DIY your own USB adapter. Color: Silver, Black.
$
139.99
Buy It Now
$9.85 Shipping
Condition: Used
Location: Simi Valley, United States
KISTLER 8620 9.81 mV/g ACCELEROMETER VIBRATION CALIBRATION DRW#07 Sold as is. Thanks. TERMS OF USE Welcome to our SILO Ebay store. Please. Review our ... moreterms and conditions, which has the purpose to clarify and help for a better business relationship with our customers. If you do not agree with any part of our company policies, please do not do any bidding in our items. IF YOU PLACE A BID IN OUR ITEMS We’ll consider that you have agreed to all the following Term of Use. ITEM CONDITIONS: Please. Make a thoroughly inspection of the photos, description and conditions of each item you are interested, before placing your biding. SILO attempts to be as accurate as possible. However. SILO does not warrant that product descriptions or other content is accurate, complete, reliable, current, or error-free. If a product offered in our store is not as described, your sole remedy is to return it in unused condition. DISCLAIMER: Many of our items are previously USED products or REFURSBISHED. Therefore they are sold“with all faults” or“AS IS” unless otherwise specify in writing. The condition of the item is provided in the“ description” RETURN POLICY: Our goal is to provide our customer with the best option for their needs. If you need to return item this rules will apply: We offer the buyer a two weeks(14 days) right to return the item. The buyer will be responsible for the cost of packing and shipping the item. Items MUST BE returned for any Refund. We do not offer partial refunds. Refunds will be given as money back. WARRANTIES OR RETURNS: NO WARRANTIES ARE EXPRESS OR IMPLIED. Items that are supposed to be operational according to the description in the listing can be returned if they are D.O.D. Items that are untested or are sold‘AS IS’ can not be returned. DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY: All ITEMS OR PRODUCTS LISTED IN OUR EBAY STORE ARE PROVIDED BY SILO ON AN"AS IS" AND"AS AVAILABLE" BASIS. UNLESS OTHERWISE SPECIFIED IN WRITING. OUR SILO STORE MAKES NO REPRESENTATIONS OR WARRANTIES
$
9.23
Buy It Now
Free Shipping
Condition: New – Open box
Location: China
Used for heat-dissipating aluminum casing of electronic products, printed circuit board wiring aluminum box, DIY, etc. Application: Used for heat-dissipating ... morealuminum casing of electronic products, printed circuit board wiring aluminum box, DIY, etc.
$
3.17
Buy It Now
$3.82 Shipping
Condition: New
Location: China
$
2.01
Buy It Now
Free Shipping
Condition: New
Location: China
$
400.00
Buy It Now
Free Shipping
Condition: Used
Location: Valparaiso, United States
Leeds and Northup instruments Model 9696 Calibrator/tester. Has been used lightly, well cared for. Comes in a carrying case with all cables .Tested and ... moreworking see pictures
$
2.77
Buy It Now
Free Shipping
Condition: New
Location: China
$
2.85
Buy It Now
Free Shipping
Condition: New
Location: China
$
2.04
Buy It Now
$3.82 Shipping
Condition: New
Location: China
Features This device is really easy to use. If your thinking of using it with an Arduino then you need to check out our BMP180 arduino tutorial Measuring ... morethe absolute pressure of the enviroment using a digital barometer such as this has some interesting applications. By converting the pressure measured into altitude. You have a reliable sensor for determining the height of your robot, plane or projectile! Using a sensor as capable as the BMP180 you can achieve accurary of 1m. With noise of only 17cm in ultra high resolution noise. The device will operate at only 0.3uA meaning low current draw for battery powered applications. The BMP180 comes fully calibrated and ready to use. As the device operates over I2C we've added optional I2C pull ups that can be enabled using the PU(pull up) jumper on the board for your convenience and ease during breadboarding. Using I2C. The device provides pressure and temperature as 16bit values, which are used along with calibration data within the device are used to provide a temperature compensated altitude calculation. Package Included: 2PCS* BMP180 Replace BMP085 Digital Barometric Pressure Sensor Board Module Arduino Similar Products $13.28 Time left:20d 22h 11m. $1.98 Time left:15d 12h 18m. $7.40 Time left:20d 22h 7m. $1.58 Time left:21h 36m. $5.86 Time left:10d 11h 11m. $2.98 Time left:20d 6h 49m. $2.88 Time left:4d 9h 3m. $2.54 Time left:13d 22h 54m. $5.66 Time left:18d 21h 44m. $3.20 Time left:17d 13h 5m. $1.75 Time left:5d 8h 46m. $18.44 Time left:15d 10h 38m. $2.98 Time left:20d 6h 41m. $2.98 Time left:19d 2h 7m. $2.98 Time left:20d 6h 45m. $5.05 Time left:10d 3h 59m. $3.33 Time left:24d 11h 37m. $9.25 Time left:15d 10h 37m. $1.98 Time left:10d 3h 59m. $65.00 Time left:20d 3h 59m. $4.67 Time left:28d 10h 2m. $3.44 Time left:21h 41m. $139.00 Time left:20d 3h 59m. $9.55 Time left:23d 7h 3m. $3.00 Time left:17d 13h 37m. $1.38 Time left:15d 12h 13m. $1.66 Time left:9d 20h 46m. $7.96 Time left:8d 0h 14m. $15.11 Time left:23d 7h 24m. $7.99 Time left:5d 8h 46m. $2.38 Time lef
$
1.80
Buy It Now
$3.50 Shipping
Condition: New
Location: China
Features: push to stop and lock. Twist to reset, 2 screw terminals, 1 NC contact type, mushroom emergency stop push button switch. The switches are structured ... morecompactly and operated quickly and gently. Can be widely used to control the electromagnetic starter, contactor, relay and other automatic control electric circuits. Product Name: Push Button Switch; Action Type: Lacthing; Contact Type: 1 NO + 1 NC;Poles: DPST Ui: 660V;Ith: 10A; Terminals Quanlity: 4 Pins Button Diameter: 40mm/ 1.6" Mount Hole Diameter: 22mm/ 7/8" Fit Panel Thickness(adjustable) 6mm/ 15/64"max. Size: 60 x 70mm/ 2.4" x 2.8" Max.D*H) Cap Lamp: Red;Material: Plastic. Metal Powered by The free listing tool. List your items fast and easy and manage your active items. 2fiuqm.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bifc%3E2fiuqm-13ed145487b-0xf3-
$
2.62
Buy It Now
$4.97 Shipping
Condition: New
Location: China
1 PC x junction box. This box is resistant to dust and water, the degree of protection is IP55 / IP65. IP degree of protection: IP55 / IP65. Material: ... moreABS & PVC.
$
3.24
Buy It Now
Free Shipping
Condition: New
Location: China
$
11.97
Buy It Now
Free Shipping
Condition: New
Location: China
Ultra-Bright Pre-Wired LEDs and Light Emitting Diode Holders SetDimension & Specification Index:Lens Type: 5mm Round TopLight Color: Emerald GreenForward ... moreVoltage: DC 12VWire Length (Approx.): 20cm (7.87")LED Holder Overall Size (D*H): 9.5 x 12.5mm (0.37" x 0.49")Mounting Hole Diameter: 8mm (0.31")Package Content: 20 x Pre-wired LEDs, 20 x LED HoldersWide UsageThese pre-wired LED lights set can be widely used in RC helicopter, quadcopters, drone, robot decor, walkway lighting for building model, even holiday decoration, and any DIY project you can imagine.For Direct Mount-These led lights are wired with a build-in resistor and coated with tin at the end of the wire, which means they are ready for direct use.-Mount the LED in the socket and install the socket directly in the pre-drill hole.
$
25.10
Buy It Now
$5.99 Shipping
Condition: New
Location: Minooka, United States
Channelizer Cone Base, Black, Length 17 in, Width 20 in, Height 2 1/2 in, Outside Dia. 16 in, Weight 10 lb, Material Recycled Rubber, For Use With Channelizer ... moreCones. Channelizer Cone Base,Black,10 lb.
 In 

Past Items  
 
YOU WILL RECEIVE A FLUKE 3330B CONSTANT CURRENT CONSTANT VOLTAGE CALIBRATOR SOME DETAILS: The Fluke 3330B is a used Programmable DC Voltage/Current Calibrator.The Fluke 3330B combines high DC accuracy with the programmability required for automated calibration systems. May be programmed for analog DC outputs within 0.003% of command from 0 to 1111 VDC. Provides output currents from 0 to 111.11110 mA and output voltages from 0 to 1111.1110 VDC. Output current selection is provided in three ranges and is accurate to within 0.006% of the selected range. Output voltage is available in three ranges with an accuracy of 0.003% or 3 mV(1000 V range) Also features overcurrent and overvoltage protection. WE OFFER A DOMESTIC WARRANTY WHICH MEANS UNITS OUTSIDE THE USA ARE SOLD AS IS W/O RETURNS. WE'LL SUPPLY A POWER CORD. LET US KNOW IF YOU HAVE ... moreANY QUESTIONS THANKS FOR LOOKING
A15 Calibrator block for Tektronix 2784/2782 Spectrum Analyzer Fully working Has other parts for the 2792/2794. Just send me a message. All offers will be considered!
Time Electronics 609N 49-1468 L2-E DC Current Calibrator 200/240VAC 1A Item Condition: Used Quantity: 1 Unit Cosmetic Condition: 8 Functionality: power on test ok- Remarks: Actual Weight: 3.2Kg Dimension: 22x16x21- Comes with 14 days money back guarantee. We always strive to ship FAST via DHL worldwide(except for South America and Russia- see notes below) For single quantity listing. Winning bidder shall receive the actual item as shown. Local Buyers are welcome. Shipping will be via Air21/LBC, local shipping rates will be applied. Accepts paypal and wire transfer and bank deposit payments. Thank you. NOTE: Please note that upon paypal payment. Once the shipment address is provided, it will be best to provide your current phone number as well so we can write it down on the package. Locator: 1411101-KRN. PB5772-2(1) UNQ123 =================================================================================================================== ... moreTERMS AND CONDITIONS ON EACH SALE WARRANTY: All NIB(New-In-Box) NOB(New-Open-Box) and NNB(New-No-Box) comes with 14-days money back guarantee. All"USED" equipment had been tested and are guaranteed functional. Also comes with 14-days money back guarantee. All items that are declared"AS IS" have no warranty.No returns, and no refund. SHIPPING(DHL) In our quest to have the item arrived to you the soonest. We subsidize some of the shipping cost and make DHL as our standard courier. We send tracking number after each shipment. If we miss it. Please do not hesitate to send us a message. DHL shipping normally takes 2 to 5 working days to most worldwide destinations. Due to very high customs charges. We discourage DHL shipping to South American countries( Brazil,Ecuador, etc. and propose to use AIR PARCEL shipping instead. However, if you ba
Used calibrator. In good working condition.Comes with everything you see in photos.Take notice in photos has cracked case.Still an awesome deal on a great tool. Product Highlights ALTEK MODEL# 820 Functions Like a Calibrator: Milliamps. Voltage, RTD, T/C& Frequency Measures Like a Multimeter: AC/DC Volts. Ohms& Continuity Digital Accuracy with Analog Simplicity— Speed sensitive digital pot for fast adjustment. Reads& Sources Standard Process Signals— Deg C& F. MA, 4 to 20, V, mV, Ohms, Hz& CPM Easy-to-Learn— Easy-to-Use: Simple. Menuless Operation User Settable Quik-Chek Switch— Set any Span and Zero Minimum& Maximum Tracking— Instantly recall Highest and Lowest Measurements Standard AA Alkaline Batteries— Long battery life with quick battery changes Deluxe Accessories Set Included— Carrying Case w/ Neck Strap for ... morehands-free viewing,
This is a Heathkit model# IG-4505 Oscilloscope Calibrator. Which would be a good piece of test equipment for a Ham Radio or radio repair test bench. It appears to be in excellent condition, but it is not tested and is sold as-is. It came from a local Amateur Radio Operator's estate, and no tests were performed except to plug it in to AC power and observe that the Red power-on indicator did illuminate. The original manual is included. PayPal is accepted for payment. But other forms of mailed-in payments are also accepted and would be much preferred! Shipping charges will be $13.85 via USPS to CONUS(ONLY) locations. With careful packing. Any international sales must use eBay's Global Shipping Program service, where I ship the unit to a USA address, they take care of any necessary customs, etc. paperwork, and then ship to the winning ... morebidder. Shipping charges are based on USPS charges to USA destinations for a recently-shipped items of similar size and weight. The packing materials, and a 20-mile round-trip drive to the nearest Post Office. Please also remember that both eBay and PayPal take a percentage of the shipping charges, which increases the cost for the seller to ship items to the winning bidder. Please see my other listings. Including additional Amateur Radio and electronic test equipment. Thanks for looking!
Fluke 714 Thermocouple Calibrator Up for sale is the Fluke 714 Thermocouple Calibrator and everything shown in the photos above! This unit is in mint condition and was barely used. Maybe 2 or 3 times. I will be sure to pop in a new battery right before shipment so it will be ready to go upon delivery! Please examine every photo and ask any questions prior to buying. Free shipping within the US only. I will double box and provide full insurance with a speedy delivery! Signature required upon delivery. ||- Important Policy Information-||- Product Information: I am striving for positive feedback by taking quality photos and describing all of my items to the best of my ability. I am not expert in any one area. If you have any questions or concerns please contact me anytime. I also ask that you please contact me immediately if there is a problem ... morewith your order. I can and will in most situations work with you to resolve any issues and make things right. Payment Information: Immediate Payment is required with any"Buy It Now" listing. If you send me an offer and I choose to accept. Please pay promptly. Auction style bidders. Payment must be made within 2 days. Unpaid Item Assistant automatically opens/closes cases after 48 hours of non-payment. Shipping Information: I usually ship within 1 business day of cleared payment. I do not ship on weekends or holidays. I package all items with great care and fully insure all packages. If your package is damaged it is important that you contact me immediately and keep all packing materials as they are important for insurance purposes. Return Policy Information: If tamper evident seals are put in place. You must provide photos of them before any return is accepted. AS-IS" or"Parts or Not Working" listings do not carry a return or guarantee policy. If the package is damaged during shipment. Contact me promptly. Returns are only accepted if the listing states"returns accepted" The item(s) and included accessories must be returned in the same condit
Powered by The free listing tool. List your items fast and easy and manage your active items.
This auction is for a Heath factory wired EUW-16A voltage standard or voltage calibrator. Can be used to calibrate VOMs. VTVMs, oscilloscopes, etc. In good, lightly used condition. Comes with a copy of the manual. So it seems to be OK but as with all older electronics, this item is sold as is, with no warranty or returns accepted. The picture shows the exact item you will receive. This auction is open to US and Canada bidders only. No shipping elsewhere! Shipping to Canada may be slightly higher than noted. Customs documents will be prepared in accordance with the rules. Don't ask me to falsify values, I won't do it, it's wrong and it's illegal. If you want your shipment insured, please ask at the end of the auction and I will invoice accordingly. I will try to combine items whenever possible to save on shipping charges. Items ... moreare usually shipped within two days of receipt of cleared funds but there may be exceptions for difficult to pack items. Ask about other payment options. Please ask any questions before bidding. Good luck and enjoy the auction! Powered by The free listing tool. List your items fast and easy and manage your active items. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14bb71fcf1c-0x104-
MCBIA- Looking for something in particular? Search through items from ALL our sellers. Foxboro 896CAL Magnetic Flow Calibrator- Untested As-Is. Please read complete item description. Auction policies& see photos before bidding ~ Thank you Used but in good condition with some minor cosmetic wear. Unknown if any parts/pieces are missing. Photos are of the actual auction item. This item has NOT been tested in any way. Working condition is UNKNOWN so it is being sold AS-IS. For PARTS/REPAIR, No Warranty, No Return. Please bid accordingly. Auction does not include: Manual or any other accessories not listed or shown in photos. UNITED STATES ONLY! Sorry. We do not ship to Canada, Alaska, Hawaii, Puerto Rico or any other country or territory) PLEASE READ: If there are any questions or additional information is needed. Please email me before ... morebidding. We are not in on weekends so if a question is sent past 5:00pm CST on Friday we will not be able to reply until Monday) If you have any problems with my items. Contact me immediately. Please DO NOT open a PayPal or eBay dispute or return request as this will only delay the resolution. I will do my best to resolve the issue to your satisfaction. COMPATIBILITY is the RESPONSIBILITY of the BUYER. Please verify compatibility before bidding. Sometimes file photos are used to represent items being sold in the auction. Actual items may have slight differences from the picture(s) Please read item description for details and email me with any questions prior to bidding. Batteries. Ribbon, lamps/bulbs and any other disposable materials are not covered under our warranty. Battery. Ribbon, lamp/bulb etc. life cannot be guaranteed. Items are not calibrated. Password locked items are the buyer's responsibility. Items are inventoried. Serial numbers are recorded. eBay requires sellers to list items using eBay's product details which are not always 100% accurate. Please refer to seller's description for this item's details. Thank You! Payment should be received within 7
BRUEL& KJAER 4220 PISTONPHONE CALIBRATOR(missing battery holder)
Serial Number: 7140205. Photo is stock photo. This unit is used with average usage. And includes the SC600 600 MHz oscilloscope calibration option. We have owned it for the past three years but do not need it anymore. It's last calibration was an A2LA 17025 accredited calibration on 07/30/2014. We ship UPS. Shipping costs to be determined. Fluke standard description appears below: The 5520A builds on the 5500A's capabilities. Extending its workload coverage even further. Its improved accuracy, expanded ranges, and capability to calibrate 5 1/2 and 6 1/2 digit multimeters can cover virtually all your high-performance workload, including: Handheld and bench meters(analog and digital) up to 6 1/2 digits, Thermocouple and RTD thermometers, Process calibrators, Data loggersStrip and chart recorders, Watt meters, Power harmonics analyzers, ... moreCurrent clamps and clamp meters, Up to 600 MHz Analog or digital handheld and bench oscilloscopes, Panel meters, Graphical multimeters, Power meters. Disturbance analyzers, power quality monitors, recorders and other power quality related equipment(with option) The 5520A Multi-Product Calibrator sources direct voltage and current. Alternating voltage and current with multiple waveforms and harmonics, two simultaneous voltage outputs or voltage and current to simulate dc and ac power with phase control, resistance, capacitance, thermocouples and RTDs. The 5520A can also measure thermocouple temperature, humidity(with probe) and pressure using one of 28 Fluke Calibration 700 Series pressure modules. Three options add the capability to calibrate oscilloscopes up to 1.1 GHz. And the 5520A-PQ Power Quality Option enables the 5520A to calibrate power quality instrumentation to the standards of the IEC and other regulatory agencies. Wide workload coverage Because it can calibrate so much of your workload. The 5520A makes your calibration investment go farther. Instead of several instruments to purchase, maintain and transport, the 5520A combines all the capability in one compact, po
TRANSCAT AIR PRESSURE CALIBRATOR MODEL#20019P LAST CALIBRATED 1997 BATTERIES NOT INCLUDED ITEM APPEARS TO BE USED! Item came to us at the pawn shop and we don't have personal use of it. Has some scratches from proper storage- see all pictures about condition. Picture is actual item you will receive. Please see pictures for best item description. Comes with everything shown in pictures. What you see in the pictures is what you will be receiving. Please read the item description and look at the photos carefully before bidding We will describe the item to the best of our ability. PLEASE ASK QUESTIONS PRIOR TO BIDDING. WE WILL BE MORE THAN HAPPY TO ANSWER QUESTIONS THE BEST WE CAN. Buyer assumes responsibility for all shipping and processing charges. THIS AUCTION IS FOR 1(one) item unless otherwise specified. Delaware Gold& Pawn reserves ... morethe right to end any auction at anytime! All of our items will typically ship within 1-2 Business days After payment is confirmed. WE ONLY ACCEPT PAYMENT THROUGH PAYPAL AND ONLY SHIP TO U.S. ADDRESSES Except Hawaii. Alaska and Puerto Rico. We use only UPS Ground Service and are not able to ship to P.O Boxes and APO's. Be sure to check out our other items and save us as a favorite seller! Keep an eye on our auctions. You never know what we might have! We are a Pawn Shop and buy most of items from our walk-in customers. We Strive for nothing less than 5 Star FeedBack and 100% satisfied buyers! If for any reason you are not completely satisfied with your purchase before leaving feedback Please contact us with any questions or concerns at 302-384-6734 ask for Chris In Internet dept. We appreciate you looking at our items. Good luck and Happy Bidding
Unit works but I have upgraded to newer version. One piece broken as indicated in picture but I have used the unit many times without this mounting piece.
Available for sale is a Kenwood HF transceiver. Model TS-120S(serial number 0070473) The unit comes in its original box, with all of the fitted foam inserts! The unit is in very good physical condition. With only very minimal wear. The face really looks great with a bright display! Our tech tested the unit out on all bands. And found it to be in excellent working condition. 200 watts input power is reduced to 160 watts input on 160 and 10 meters. This unit has the crystal calibrator. As with all TS-120S units, this does not have general coverage receiving. Please note that only what is pictured in the photos is included. That means no manual. Etc. Also, please note that you will need to find a power cable. We did not receive one with the unit, and had to use our own to test it with. If you have any questions, please feel free to contact me. ... moreThanks for looking! 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-14bb9b91dd7-0x10a-
YOU ARE BIDDING ON ONE: LEADER LOC-7005 OSCILLOSCOPE CALIBRATOR What you see is what you get. We plugged the unit in and it turns on… no further testing was done This item came from a working Repair/ Calibration shop that was closed in the 90's. It has been sitting on the shelf since then. AS IS No refunds. PLEASE NOTE:THE LEATHER POUCH ON TOP OF THIS UNIT IS HAS A TEAR IN IT.PLEASE LOOK AT THE PHOTOS 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14bbb1ccb77-0x111-
This listing is for 1 Druck UPS-111 Loop Calibrator. It is being sold as used however it has been fully tested and does not show signs of wear. You will receive the Druck in the pictures.
All Auctions Start at $3.99! No international bidding/shipping at this time. Customers shipping to a USA-addressed forwarding company are subject to cancelation. Thank you for your cooperation and compliance. Good luck on your bidding! Inventory Number: 03141102655 Manufacturer: Description: GSE 020290-40000 DATA-STAT 290 CALIBRATOR. 038250-00101 TRANSDUCER Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY AS FOLLOWS: ONE: 020290-40000, ONE: 038250-00101, TESTED, POWERS UP, NOT TESTED FURTHER BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payment& Taxes: Payment MUST be received within 5 business days of auction's end. Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing under 50 pounds. We only accept PAYPAL for ... moreour auction items. We collect sales tax for the following states: KS. MA, MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna for instructions on how to supply us with a tax exempt form via fax or email. The invoice will automatically charge tax and you will need to notify us PRIOR to payment to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. Shipping: We ONLY combine items won within the same calendar week(Monday-Friday) We cannot issue shipping refunds after payment has been made. To receive a combined shipping rate you must contact us for a combined invoice. PRIOR to payment. Payment MUST still be received within 5 business days of auction end. All orders over $100 will require a UPS Delivery Signature Confirmation. Local pick up is available during eBay Department business hours Monday-Friday 8AM- 3PM(holiday hours vary. Please call) Saturday pick up requires 24 hour notice. Items must be paid through PAYPAL prior to pick up. If you need to make pick up arrangements outside of our business hours, please call 440-668-4517. Items MUST be picked up within ONE WEEK of payment. We do not falsify customs declaration values of purchased items
Excalibur Engineering offers the highest quality refurbished test equipment in the industry. We also provide rentals. Calibration, and repairs of current& obsolete ATE equipment including HP/ Agilent, Tektronix, Fluke, Anritsu, R&S, Aeroflex, Bruel& Kjaer, and hundreds of other manufactures. Excalibur is also an approved Fluke Distributor and rental partner for Aeroflex. Boonton, and Tektronix. Fluke 9500B Oscilliscope Calibrator and Fluke 9530 Calibration Head Oscilloscope Calibration Workstation(5 Channels) Option 600: 0.1Hz to 600MHz Any questions? Don't hesitate to contact us. And we will give you a prompt response! Includes 90 Day Warranty! Both Units Calibrated 2-17-2015! Option 006.1Hz to 600MHz New Price: $34.200 Our Price: $25.299 Description Calibrator: The world's highest performance. Fully automated, upgradeable ... moreoscilloscope calibration workstation Oscilloscope calibration can be complex. Time consuming and expensive. A significant amount of skilled operator interaction and interpretation is often required to complete the job, and today’s multi-channel instruments frequently mean that a great deal of lead switching is required. Even automated systems require significant manual intervention to complete elements of the most simple calibration procedures. Worse still, switching systems or multiplexers used to enable a degree of automation often contribute more errors and aberrations than the instrument being calibrated. To compound the problem. Rapid developments in oscilloscope technology make it difficult to keep up with performance trends without substantial re-investment on a regular basis. The 9500B Oscilloscope Calibration Workstation breaks that paradigm. It means that the benefits of hands-free, fully-automated, accurate oscilloscope calibration are readily available to everyone at a price and performance level that your needs and budget can support, while ensuring that, through performance upgrades, future needs will be met when the time demands it. 9560 Active Head– for ulti
As part of my housecleaning. With an eye toward putting good stuff in the hands of someone who can benefit I offer these. All have been checked and all have functional heating elements. They have not been powered up. Three are two crystal. One is single. Three are dual voltage 6.3V/12.6V and one is single voltage. One is GE, and the James Knight unit appears to have gold plated contacts. One has a 1mhz calibrator crystal installed and would be useful in the many rigs which used them pre-synthesizer and phase-noise! Since these are light in weight I will consider shipping these overseas and to Canada of course. Shipping will be a bit extra.
Very lightly used. Includes test lead kit and custom"pelican Style" case. Has an identification number engraved below the LCD screen. Product details ALTEK MODEL# 820, Functions Like a Calibrator: Milliamps. Voltage, RTD, T/C& Frequency, Measures Like a Multimeter: AC/DC Volts. Ohms& Continuity, Digital Accuracy with Analog Simplicity— Speed sensitive digital pot for fast adjustment. Reads& Sources Standard Process Signals— Deg C& F. MA, 4 to 20, V, mV, Ohms, Hz& CPM, Easy-to-Learn— Easy-to-Use: Simple. Menuless Operation, User Settable Quik-Chek Switch— Set any Span and Zero, Minimum& Maximum Tracking— Instantly recall Highest and Lowest Measurements,
This calibrator was originally purchased in 1993. But has seen very little use over the years. The calibrator is in excellent condition. The unit pictured is the unit that you will receive, both the calibrator and case look like new. The calibration has not been certified since 1993, so it obviously will need to be re-certified for NIST traceability. I checked it with a Fluke 725 multifunction calibrator connected to an RTD and it was within 1% of that instrument from 200 deg F to 600 deg F. Display is selectable for deg C or deg F. Maximum temperature setting is 600 deg C or 1112 deg F. Specifications: Temperature range = ambient to 600 C/ 1112 F. Display Resolution = 1 deg, Accuracy = +-1/2 deg, Stability = +-05 C or.1 F, Heating time to max = 35 mins, Cooling time to 11 C or 212 F = 80 mins, Well depth = 200mm/ 8 inches, Well diameter ... more= 26mm/ 1.024 inches, Line Voltage = 115 VAC, 50/ 60 Hz, Power Consumption = 1200 watts Included accessories: Hard shell case Shoulder strap for case Keys for case 4 insertion tubes(1/8" 1/4" 3/8" and 1/2" Tool for installing/ removing insertion tubes Instruction manual
100-Day Warranty!
BEST OFFERS WELCOME Up for sale is a used Valhalla Scientific 2701C Programmable DC Voltage Standard from surplus. The unit has some scrapes and dings from previous use(SEE PHOTOS as photo description supersedes text description) But is otherwise clean and in good physical condition. Please check out our other testing equipment auctions. Unit is being sold AS IS as we have no way of further testing. Unit was removed as surplus from a working environment. Paypal payment is due within 24 hour of close of auction. Thank you.
This item is a used Fluke 743B Documenting Process Calibrator that has been Calibrated to NIST standard. In good condition. Includes 2 sets of new leads, clips, external battery charger, power supply to charge battery when in meter, power supply for external charge, 2 batteries(1 Fluke original, and one brand new aftermarket) certificate of calibration, and 90 day warranty. All pictures are of the actual unit. This item comes with a 3 Month(90 day) warranty. All functions are guaranteed to work or money will be refunded(buyer pays return shipping only) This item includes a 1 year NIST traceable CERTIFICATE of Calibration. Dated February 07, 2015. We Calibrate your Test Equipment! Contact us for more information on Calibration. The 743B does the work of several tools– sourcing. Simulating and measuring pressure, temperature, and electrical ... moresignals in one rugged, hand-held device. For documentation. The 743B automates calibration procedures and captures your data. And. Of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations. The 743B has a PC interface that lets you download procedures. Lists, and instructions created with software-or upload data for printing, archiving, and analysis. With its expanded memory, the 743B can hold a full week of calibrations and procedures. The 743B is easy to use with flexible test strategies. And like all Fluke tools. It's rugged, reliable and tough as nails. It's like having several powerful tools in one- so you can work faster than ever: Measure volts. MA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments, Source/simulate volts. MA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters, Power transmitters during test using loop supply with simultaneous mA measurement, Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules, Measure and source with one compact. Rugged, reliable tool, Create and run automated as-found/as-left procedures to satisfy quality pro
This item is a used Fluke 744 Documenting Process Calibrator with HART that has Calibrated to NIST based standard. In good condition. Includes 2 sets of new leads, Fluke probes, clips, external battery charger, power supply to charge battery when in meter, power supply for external charge, 2 batteries(1 Fluke original, and one brand new aftermarket) certificate of calibration, and 90 day warranty. All pictures are of the actual unit. This item comes with a 3 Month(90 day) warranty. All functions are guaranteed to work or money will be refunded(buyer pays return shipping only) This item includes a 1 year NIST traceable CERTIFICATE of Calibration. Dated February 07, 2015. We Calibrate your Test Equipment! Contact us for more information on Calibration. Ready for Anything As more and more process plants begin to take advantage of smart transmitters. ... moreThe need for a new generation of calibrators has emerged-calibrators that can communicate via industry standard digital protocols. The 744 combines HART communication capability to deliver an integrated communicating calibrator. This rugged, reliable tool is ideal for calibrating, maintaining, and troubleshooting HART and other instrumentation. The 744 does the work of several tools- sourcing. Simulating and measuring pressure, temperature, and electrical signals in one rugged, hand-held device. For documentation. The 744 automates calibration procedures and captures your data. And, of course, it helps you meet rigorous standards like ISO 9000, FDA, EPA and OSHA regulations. Measure volts. MA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments Source/simulate volts. MA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters Power transmitters during test using loop supply with simultaneous mA measurement Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results Holds
For sale is a vintage recorder calibrator. 0-1200 deg. C, with numerical rolling tape display. It was manufactured by Howell Instruments in Ft. Worth. Texas, P/N BH153-3, serial 553S. It was used in the aerospace industry, NSN 6685-00-943-2270. Includes electrical cord and adapter cable. BH13229. The instrument measurements are: 4.5 x 2.25 x 3 inches. This is a vintage instrument. And we have no way of testing, so unknown condition. It shows last calibration date as Sept. 21, 1990, and calibration expiration Aug. 2, 1991. The calibration seals have not been broken. We are selling AS IS. Questions about this item? Contact me through My Messages on eBay. Check out our other items in my eBay store"Various& Sundry" Thanks for Looking!
General Product Information Mfr. Part Number: 744 Manufacturer: Fluke, Description: Fluke 744 Documenting Process Calibrator- with HART capability, Specifications: Measure volts. MA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments.Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters. Power transmitters during test using loop supply with simultaneous mA measurement. Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules. Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results. Holds up to a full week of downloaded procedures and calibration results. Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, ... moresquare root DP flow testing, programmable measurement delay etc. Bright white dual display. Read both sourced and measured parameters simultaneously. Multi lingual interface. Rechargeable NiMH battery for 10 hour uninterrupted use. Includes gas gauge. Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms. Delivered with DPC/Track Sample software. Compatible with many Asset Management software packages. HART Capabilities: The 744 is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers the communication capabilities of the 275 HART communicator. Requires no external box or second tool for everyday HART calibration and maintenance. Offers fast HART communication. Supports popular models of HART transmitters, with more devise-specific command support than any other HART field calibrator. Works with multiple masters, burst mode, and multi-drop configurations. Is easy to update as additional instruments are added and new HART versions are released. Interrogate to determine device type, manufacturer, model, tag. Reconfigure the sensor mapping of dual sensor temperature transmitters. Read
You are bidding on a good used Fluke 5440B/AF Direct Volts Calibrator Checked and in good working order Has a slightly dim display and a few scuffs here and there but otherwsie is a nice unit The Fluke 5440B Direct Voltage Calibrator is equipped with bright vacuum-fluorescent displays for clear visibility at any viewing angle. The 5440B offers output voltage of 0 to 1100 VDC with accuracy of 3 ppm. Completely automatic internal calibration. No mechanical adjustments. Provisions for simplified external calibration. Completely programmable through IEEE-488 Interface. Serial printer output for calibration constants and instrument test results. The 5440B is recognized as one of the most accurate and stable DC standards available. Winner to pay actual shipping costs on 68lbs. Thanks
Good shape. Not much to say.pics say it all.
This is a Larson Davis 712 SLM(Sound Level Meter) along with a CA150 Sound Level Calibrator. Both components are in very good condition with barely any signs of use. These were older units that show calibrations from 1999/2000. But they both function perfectly according to my tests. Both units are powered by a single 9-volt battery each(included) The calibrator properly generates tones at 94/114db and the main SLM unit can detect and respond to those signals. After calibrating to the main unit with the calibrator. It was able to provide readings within 1db of the measurement source. It comes with several accessories and documentation. Some software is included(on a floppy disk) Although due to the age of the software, no guarantees are given on it's functionality. A device s also included for interfacing with a serial port. The unit is ... morea working range of 35.5-145dbSPL according to the specifications in the manual. Auction Includes: Larson Davis 712 Sound Level Meter Larson Davis CA150 Acoustic Calibrator(2) 9-Volt Batteries PC Interface Unit& Power Supply Documentation Calibration information for SLM/Calibrator Windscreen for Microphone Wide-Angle Attachment for Microphone Pouch with adjustment tools(not pictured) Shipping is calculated for US& International customers above. Powered by The free listing tool. List your items fast and easy and manage your active items.
Up on this auction is a brand new and a slightly used TRUETRACK BLOOD GLUCOSE MONITORING METERS and one CASE. The two Glucose meters are in very good working condition with one being brand new and the other is used. I am selling these items because my new insurance company no longer supports this manufacturer test strips. The NEW has a serial number of 3685754 and is in excellent brand new condition with a fresh battery. The used meter has a serial number of 3685780 and is in very good condition with a fresh battery. This meters was only used in either a smoke free home and office! I do realize there are other items in the pictures but are NOT included with this auction. The test strips and the test blood samples have expired and discarded. The auction does include the 1 new meter. The 1 used meter, one case, 2 calibrators and the instructions. ... moreThe box will not be included in the auction unless the buyer wants it and please realize the shipping will be higher. This i tem is sold"AS IS" and has“no warranty implied” and I have tried to describe this item honestly as possible. According the"new" eBay rules. Payment can only be made by using PayPal or the payment could be made in other ways such as if& when the item are picked up. Any other payment method is no longer allowed to be mentioned in the auction( Bidding on this auction is a legal and binding contract. Any bidder with zero or negative feedback must contact me before bidding. This auction may be stopped at anytime because the items are for sale locally. God Bless America! Pray for our Sons& Daughters in the Military Service!
SPECIFICATIONS: Short Calibrator. N-Male type connector Original HP/Agilent products SELLERS NOTE: For more details about the item and shipping contact seller. PAYMENTS: We only accept Paypal. Payments must be received within 5 days from the date of purchase. FEEDBACK: We value our customers and we encourage you to contact us via pm or email for problems(if any) that you may encounter. We are here to help. Before leaving any negative feedback, we appreciate to please contact us first to resolve any problems that may arise during the shipping. Problems are easily solved with proper communication. HANDLING& SHIPPING: It will usually take us 1-2 business days to handle orders after cleared payment. We ship to eBay’s confirmed address only. Please ensure your registered eBay address. We ship through International Postal Service. It usually ... moretakes 3-4 weeks CUSTOMS& TAX(If applicable) Customs duties and Taxes. Are buyers responsibilities at their respective countries. REFUNDS& RETURNS: Contact us first before returning any product. We only accept returns if the items you received are not what was described in the listing. The item for return must have the original tags and packaging. Otherwise it won’t be accepted. Returns must be made within 14 days after receiving the item.
I recently purchased a lot of gear from a decommissioned Govt Surplus liquidation(see my other auctions) This auction is for A Gilian HFS pump Calibrator model HCP 300 H note the H model only measures High flow. The unit is in nice shape aesthetically and comes with a gastech GX 82 gas Alarm. I am unclear what the working status of these two units is. But I will say I hooked a hose up and sucked through the B1 pump suction and the inches of water meter moved. And blew through the B2 and the High flow ball moved up as seen in pics 7&8. The Gas alarm looks basically brand new but I haven't a clue how to test it. Comes with Hoses. Soap solution 2 keys+ Manuals for both units. I am offering this at the lowest price I have seen and including the gastech gx 82. I have this listted very reasonable as is but feel free to make an offer. Please ... moreask any questions you may have and I will answer them to the best of my ability as I won't be unfortunately accepting returns on this item. Thanks and good luck*
X-Rite ColorChecker Passport- Camera Calibrator + Extra Classic Card X-Rite ColorChecker Passport- Camera Calibrator Everything pictured is included. Included in the original packaging is very lightly used ColorChecker Passport with included software CD and lanyard. Also included is an additional small Colorchecker Classic. An effort has been made to provide quality pictures under good lighting. So please review them prior to bidding/purchase. If there are any questions, please ask. Thanks! gsrx_vers_526(GS 6.6.6(526)
Fluke 726 Precision Calibrator used mint condition display still have the plástic protector. Excellent working conditions come with regular leads see pictures, excellent calibrator, and excellent price is almost New is perfect.
WE BUY OBSOLETE AND EXCESS INVENTORY! This unit is a Heise PTE-I Dual Display LCD Handled Digital Calibrator with Case. Unit may have been previously used but it's still in good conditions. Unit also comes with two modules but no batteries included. Need to contact us? We are open 8-4:30 PST Mon-Fri. Our phone number is 858-658-9207. Buyer to pay shipping and handling. unless listed above as local pick up only) We DO consolidate shipping on multiple item purchases whenever possible! Please see shipping calculator below to calculate your shipping costs. CA. buyers. Please remember to include 8% tax with payment! The only way we will ship Internationally is through eBay's global shipping method. Where eBay gives us a U.S. address to send it to and they take care of the rest of the shipping internationally. If that option is available, ... moreyou should be able to see it on the shipping calculator. We would not be able to consolidate shipping when using the global shipping method. Please Note: UPS does not ship to APO or PO Box addresses. So we will need a physical shipping address. Items are to be paid for within 5 days of winning bid. If sold for local pick up. Must be picked up also within the 5 days of winning bid. We can ship 3rd party billing to your UPS account number also! Just let us know your UPS account number after winning the bid! Email us for s&h quote if there is no shipping calculator. We accept paypal payments.
Description HP/ Keysight 8477A Power Meter Calibrator The Keysight/HP 8477A power meter calibrator is specifically designed for use with the 432-series power meters. It allows you to verify full-scale meter readings on all ranges. And meter tracking. Simply connect three cables between the power meter and calibrator, no charts or additional instruments are required. You can perform full calibrations and certify 432 Power Meters using only the easy to use Agilent/HP 8477A. Operating and Service Manual is available. The item is in good condition. Tested and working. Shipping Weight(lbs. 6 Shipping Dimensions(in. 15 x 11 x 7 Description
USED Motorola R-1009A Deviation Calibrator Includes: 35 MHz Deviation Calibrator-400 KHz R.M.S. 70 MHz Deviation Calibrator-2.1 MHz R.M.S. Power Requirements: Two(2) 9 Volt batteries(Not included) NO Instruction manual or Cables with unit. Condition: USED: In good condition. All functions were operational on test bench. FREE U.S. Shipping! 352-726-2700 9-5 M-F We try to describe all items as honestly and accurately as possible. As a Consignment store it is impossible to be an expert in such a wide variety of Items. We may inadvertently omitted information that as a buyer you feel is important. Please feel free to e-mail with any questions you may have PRIOR to bidding or Purchase. Legacy Two-Way charges a nominal handing charge to cover packing and supplies. FREE U.S. Shipping. Calculated International shipping price includes a 2.45 handling ... morecharge. Shipping Discount On Second Item Purchased. Legacy Two-Way will always provide optional Shipping methods by request and prior to checkout. Our goal is to provide you the lowest cost possible in all our listing. Legacy Two-Way attempt’s to be as Eco-friendly as possible. We will uses recycled packaging. Both inside and out, whenever possible. So sometimes our packaging may not be the most fashionable but we promise it will protect your purchase during shipment. This is one way we can all attempt to keep everything possible out of our landfills. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. 352-726-2700 9-5 M-F TAX
Like New. Very Little Use. Screen Still has original Plastic. Purchased for troubleshooting and was overkill. Calibrated& HART Firmware current by Fluke 18Dec14 with NIST Traceable Certification. Fluke 744 Documenting Process Calibrator Calibrated@ Fluke w/cert Current Firmware Version 4.03 See Attached Photo of OEM Inclusions. Comes with all original test leads& associated test probes most never used. Comes with Hart Cable. Comes with 2 Batteries. Included is a NEW additional Battery Charger. Included is an unopened DPC/TRACK Software. Full Version) Unit will be shipped insured paid for by me and a signature will be required.
You are bidding on one CEL 500 SOUND ANALYZER 573.C1L w/ 192/2F MIC 284/2 CALIBRATOR KIT. I will guarantee this item not to be DOA. We do combine shipping so don't forget to check out our other items. We prefer payment made through PayPal. Thanks for Looking and Good Luck! DOA Policy* If item is sold with DOA warranty and item is received DOA the buyer must email within 14 days of receiving the item.
Used Northern Engineering Labs 100 khz calibrator crystal. Used in frequency standards in receivers and test equipment. As a longtime Ebay seller to do my best to make sure items leave here working with no missing parts. etc. I do take pictures. So please do not replace your broken parts with my known good parts. I am pleased to ship items internationally.All customs fees to paid by buyer. I cannot control shipping problems once it leaves here. Should any issues arise PLEASE contact me before filing and defects claims. I will do everything i can to correct any issues that arise with out Ebay intervention.
used
THERMO BLH 325/Vernier Precision Calibrator Model 325 Used. Excellent Condition Payment: PayPal payment only. Immediate payment when buyer uses Buy It Now. Shipping and Handling: USPS/FedEx MAIL. Ships the same day as payment received and cleared, only to PayPal Global Shipping Program Buyers: We are not responsible for any import duties or customs fees. Before you buy please use eBay shipping calculator and check with your local customs office! Returns: Are accepted within 14 days only for US for certain items. Please feel free to contact us first for any concerns. All non-defective returns are subject to a 15% restocking fee. All return shipping charges must be prepaid by the customer. There are no refunds on shipping. The cost of shipping will be credited only in those instances where the return is a result of our error.
These both power up. Sold"As-Is" Returns are accepted; buyer to pay for return shipping. Includes everything shown in pictures.
VERY VERY LIGHTLY USED FLUKE 715 VOLT/ mA CALIBRATOR WITH LEADS-CASE STILL HAS PROTECTIVE PLASTIC ON DIGITAL READ-OUT VERY NICE NEAR NEW UNIT-12.95 SHIPPING PAYPAL PAYMENT
CEL INSTRUMENTS- SOUND LEVEL METER CEL-231& ACOUSTICAL CALIBRATOR CEL-282 INCLUDES EVERYTHING PICTURED GENERALLY SHIPPED WITH 24-48 HOURS OF CLEARED PAYMENT- PLEASE PAY PROMPTLY AFTER AUCTION SHIPPING TO US ONLY
VICI METRONICS DYNACALIBRATOR SELLING AS IS- NOT TESTED GUARANTEED TO POWER TESTED TO POWER ON THE SILVER BALL GOES UP AND DOWN AND YOU CHANGE THE SPAN- THERE IS SOME AIR FLOW FROM THE SPAN OUTLET NOT REALLY SURE THE HEATER WORKS. BUT THE NUMBERS ARE GOING UP AFTER I TURN ON THE UNIT- SEE PICTURES THE CASE IS MISSING 2 OF THE FEET/CUSHIONS AGAIN I AM NOT AN EXPERT- SELLING AS/ IS PLEASE SEE PICTURES I AM NOT AN EXPERT- ITEM CAME FROM GOV SURPLUS LOCAL PICK UP OR TESTING ALLOWED THANK YOU
This is a very nice process calibrator. Everything works and is within specs. It comes with everything pictured including power adapter and test leads. If you have any questions just inbox me.
UP FOR AUCTION IS AN EXTECH"THE OYSTER SERIES" CURRENT& VOLTAGE CALIBRATOR(MODEL 412355) THE UNIT POWERS ON AS IS EVIDENT IN THE PHOTOS. ONLY THE UNIT WHICH OPERATES ON A 9 VOLT BATTERY IS INCLUDED. CORDS AND ANYTHING ELSE THAT GOES WITH IT ARE NOT. THE INSTRUCTIONS ARE ALSO INCLUDED. NOTE: I SHIP 3 BUSINESS DAYS FROM RECEIVING CLEARED PAYMENT(SATURDAY. SUNDAY, AND HOLIDAYS ARE NOT CONSIDERED BUSINESS DAYS) IF YOU NEED YOUR ITEM OR ITEMS SOONER PLEASE EMAIL ME AND I WILL DO MY BEST TO TRY TO ACCOMMODATE YOU. NOTE: PLEASE ONLY CONTACT ME VIA EBAY'S EMAIL SYSTEM AS I RARELY EVER CHECK MY REGULAR EMAIL. THANKS FOR VISITING AND HAVE A BLESSED DAY!
This item is a used Fluke 787 ProcessMeter that been Calibrated to NIST standards on Feb 07. 2015 with data. Includes Fluke leads with clips, certificate of calibration with data, and 90 day warranty. All pictures are of the actual unit. This item comes with a 3 Month(90 day) warranty. All functions are guaranteed to work or money will be refunded(buyer pays return shipping only) This item includes a 1 year NIST traceable CERTIFICATE of Calibration with data. Dated February 07, 2015. We Calibrate your Test Equipment! Contact us for more information on Calibration. A maintenance and calibration tool that will be at home in every instrumentation technician's tool box. The Fluke 787 ProcessMeter™ combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on ... morethe trusted Fluke 87 DMM, the 787 adds the ability to measure, source, and simulate dc loop current with 0.05% accuracy and 1 microamp resolution. DMM and loop calibrator in one tool, Clear LCD with backlight; 4.000 counts(30,000 counts for dc current) Externally accessible battery for easy battery changes. 1000V overload protection on V. Ohms, frequency. 150V overload protection on mA. Backed up by 440 mA 1000V fuse. 25% Manual Step plus Auto Step and Auto Ramp on mA output. Fluke combined the DMM you trust with the loop calibrator you need. The Fluke 787 ProcessMeter™ puts a complete troubleshooting solution in the palm of your hand. Get in touch with more information. Faster and easier with the newest member of the Fluke 80 Series, the 787 ProcessMeter. The 787 gives you the measurement capabilities you expect from our rugged, reliable DMMs plus the ability to source, simulate, or measure dc current with 1 microamp resolution and accuracy of 0.05% Put it all together and you have the ideal tool for troubleshooting and calibrating current loop applications. So if you're tired of always tracking down a calibrator, lugging around two tools and switching back and forth, get t
fluke 725 multifunction process calibrator with NEW test leads. Has small crack on screen. I just sent this to fixmyfluke.com and he tested and fixed everything. This is a fully functional machine. See the correspondence below from the man who fixed the machine. Shipping to the continental US only. Shipping flat 19.99 includes shipping/handling/insurance. Payment by Paypal only. Nelson Bryson nbryson@yahoo.com Feb 21(8 days ago) to me Hi! Thanks for sending your instrument for repair. I appreciate your confidence! You will be pleased to hear I have restored both your devices to full functionality. A picture of each meter attached to my calibrator is attached for your review. As you can see. They are precise at the calibration points. The 725 common and positive input terminals had detached from the main circuit board completely. I reworked ... morethese connections and successfully tested for continuity and cross interference. One of the 50mA slo-blow sub miniature fuses was bad. I replaced it with a new Fluke fuse. The Fluke TL75 lead set you sent along has a broken shroud on the positive lead. For this level of instrument I recommend the Fluke TL 71 premium lead set. That was probably the set that came with your 725. The TL71 lead set has much stronger and deeper shrouds that should prevent further input connector damage Email after it was fixed: 725: I repaired defective solder connections on two input terminals- They are fine now. One fuse was bad. I replaced it. The shroud on the positive lead was cracked- you have new Fluke leads to replace that problem. The meter has been tested and is in good working condition.
This equipment is in great working condition. It was plugged in and responded well. However no other testing was done. Item is sold as is. Paypal Only No Exchanges
Heath kit Assembly Manual for the Voltage Calibrator Model VC-2. Includes slip indicating guarantees are voided on instruments in which acid core solder or paste are used. Very good condition. Wrinkles along spine. Bent corners. Some light dirt on front and back covers. Winning bidder pays $2.50 shipping within the U.S. PayPal accepted. U.S. shipping only.
Up for grabs is a Fluke 702 in very good condition including a NEW battery. All functions work well and the unit is in really nice condition overall. There are a couple of slight blemishes on the clear plastics of the face(typical) But these do not detract from the unit. I didn't include leads with this one. But please let me know if you need leads and I'll throw in a set of Pomona leads for you- The charger works great. But the Fluke logo on the charger is missing(who cares? I purchased and installed a new strap for this one because I like these and I wanted this one to be good to go. I also installed a new memory back-up battery so the date and time will be correct. Please feel free to ask questions! Thanks for reading! Tony.
This Unit is Being Sold AS-IS for Parts or Repair Used Druck DPI 510 Pressure Controller/Calibrator 150 PSI and 800 PSI This unit powers on. Light on left side of face light up, buttons all beep when pressed, but no display on the LED/LCD screens. If you would like additional testing, and its something you can walk me through, I'd be more than happy to try, just contact me. No power cord. No probes. Accessories, or manuals are included
Today I am offering an exceptionally nice Bios Defender model 510 Gas Flow Calibrator with the software CD and the manual. Other than the adapter cord having a cut in it this unit is in very good condition. I did not fully test the calibrator. I did power it up and go through the menu options. Included: Bios 510 Defender Bios Optimizer Software CD 2 Plastic leak test caps AC adapter/charger(the cord does have a cut) Manual Original Packaging(I do not have the original box) The PC Serial cable is NOT included: Please look closely at the photos to help determine the condition for yourself. Use the enlarge and zoom features to help. I do not charge a handeling fee. The shipping charge is the actual postage or UPS fee. Like all of my auctions there is no reserve(which I find annoying) and I set the starting price low. The photos I use are photos ... moreof the actual item you are bidding on. Of course there is a 14-day money back"no questions asked" guarantee. I attempt to describe the items I sell accurately. Should you have any questions about the item please ask before you bid. The easiest way to do this is"click" on"ask the seller a question" I strive to maintain a high positive feedback score. Please contact me should you have a problem with any item you have purchased from me before leaving a low(1 or 2 star) feedback score. I want you to have a positive Ebay experience and will do my best to provide you with that positive experience. I do accept PayPal. For those that win more than one auction I will combine shipping to help reduce that expense. Local pick up can be arranged. Thank you for looking and good luck bidding. International buyers. Please note: Import duties. Taxes and charges(typically collected upon delivery or pickup) are not included in the item price or shipping charges. Please check with your country’s customs office prior to bidding/buying to determine what these additional costs will be. Powered by The free listing tool. List your items fast and easy and manage your acti
ebay template Item Description Why buy from us? Really fast checkout Capintec CRC-12 Radioisotope Calibrator Radiation Detector Capintec CRC-12 Radioisotope Calibrator& Radiation Detector his is a Capintec Model CRC-12 Radioisotope dose calibrator. It will measure the radioactive level of anything that is put down the lead lined chamber on top of the display unit. The calibration setting sheet for many isotopes is included. What is included: CRC-12 Power Cord Condition: The photos demonstrate that this unit is in clean cosmetic condition. There is no damage. Old inventory stickers, or adhesive residue on the case. The unit powers up and produces a display. When a radioactive substance is lowered into the test chamber the numbers change. No further testing was performed. We are unable to evaluate the unit further. Therefore this unit is ... morebeing sold in"as is" condition. Please note: Due to the lead lined measurement cavity this unit is heavy, about 45 lbs unpacked. It will be packed for FedEx ground shipment to continental US destinations only. All photos are of the actual unit for sale. We don't use"stock photos" Click on the photos for an enlarged view. Why buy from Ateknia? Fast shipping Great feedback 16+ Years of eBay experience Professional" overpacking" to protect your items during shipment Lots of large clear photos to show true condition Detailed descriptions with my description guarantee. Unique quality products. Not untested"surplus" or scrap Thanks for your business during the past 16+ years. Detailed Seller Ratings(DSR) have replaced the old feedback system. It is my goal to earn a full 5 DSR stars on every transaction. I invite you to check my feedback and DSRs with the link below. Link to my feedback No risk return Policy I guarantee all of the items I sell to be as described in the listing. Period. If my description is in error. I will refund your full purchase price upon return of the item in as sold condition. My goal is to provide an accurate descrip
This is a hard-to-find. Vintage Heathkit model# HRA-10-1 Crystal Calibrator from a local Amateur Radio Operator's estate. It appears to be in good physical condition, but it is not tested and is sold as-is. It was originally designed to be used in Heathkit Receivers such as the HR-10 series, and the single band"Hot-Water" SSB transceivers, like HW-12, HW-22, HW-32 and the later"A" versions of those radios. Those Heathkit Receivers and Transceivers have an octal socket on the main chassis that this calibrator plugs into. I see no evidence of any extra holes or any modifications. PayPal is accepted for payment. But other forms of mailed-in payments are also accepted and would be much preferred! Shipping charges will be $7.65 via USPS to CONUS(ONLY) locations. With careful packing. Any international sales must use eBay's ... moreGlobal Shipping Program service, where I ship the unit to a USA address, they take care of any necessary customs, etc. paperwork, and then ship to the winning bidder. Shipping charges are based on USPS charges to USA destinations for recently shipped packages of about the same size and weight. Packing materials, and a 20-mile round-trip drive to the nearest Post Office. Please also remember that both eBay and PayPal take a percentage of the shipping charges, which increases the cost for the seller to ship items to the winning bidder. Please see my other listings. Including additional Amateur Radio and electronic test equipment. Thanks for looking!
A lightly used pressure calibrator. For a used item this is in extremely clean condition. Little wear and tear and no apparent damage. Tested and verified to hold both positive and negative pressures(see pictures) Operates from 4'D' type batteries(not included) Battery terminals and compartment in excellent shape(see picture, no battery leakage etc. All items shown in pictures are included, as follows: DPI603 Portable Pressure Calibrator. Original calibration certificate(dated 1999) Electrical leads and connectors. User manual K187. User manual K184. Carrying case with Velcro seal. Carrying strap.
ebay template The Following Items Are Included: Fluke 789 ProcessMeter Digital Multimeter& Loop Calibrator(BC# 20011) 2) Fluke 1000V Hard Point Test Leads(1-Red. 1-Black) User Manual On CD-ROM Carrying Case(G) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Fluke 789 ProcessMeter Digital Multimeter& Loop Calibrator 24 V Loop power supply 1200 Ohm drive capability on mA source HART mode setting with loop power and a built-in 250 ohm resistor Includes Carrying Case& Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty Double Your Power The Fluke 787 was the first tool to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now it’s even better. The range is extended with the ... morenew Fluke 789– the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt loop supply reducing the need for taking a separate power supply when doing offline transmitter testing. And with its built-in, selectable 250-Ohm Hart® resistor, it also eliminates the need to carry a separate resistor with you. Now process technicians can do a lot more while carrying a lot less. Features 24 V Loop power supply Very large dual display Enhanced backlight with 2 brightness settings 1200 Ohm drive capability on mA source HART mode setting with loop power and a built-in 250 ohm resistor 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check Externally accessible fuses for easy replacement Infrared-port to process data in FlukeView Forms(V2.1) software Precision 1000 V. 440 mA True-RMS digital Multimeter 0.1% dc voltage accuracy 0.05% dc current accuracy Frequency measurement to 20 kHz Min/Max/Average/Hold/Relative modes Diode Test and Continuity Beeper Simultaneous mA and% of scale readout 20 mA DC current source/ loop calibrator/ simulator Manual Step(100% 25% Coarse, Fine) plus Auto Step and Auto Ramp Externally accessible battery for easy battery
VINTAGE BUD RADIO FREQUENCY CALIBRATOR/TRIMMER. IN*UNTESTED CONDITION. UNDERSTAND THIS IS FOR A HAM RADIO. NOT AN EXPERT IN THIS AREA. WILL JUST DESCRIBE FULLY& LEAVE THE REST TO INTERESTED PARTIES TO ENQUIRE. FULLY ENCLOSED METAL BOX. 35W4/50C5/90A IT MEASURES APPROX 5.25"L X 3" W X 2.25" H. THE PIECE HAS TWO TOGGLE SWITCHES; ONE ON TOP FOR CALIBRATE/STANDBY AND ONE ON SIDE FOR ON/OFF. MADE IN CLEVELAND. OHIO, USA. IT HAS AN ELECTRICAL CORD ATTACHED. AS WELL AS ANOTHER WHITE CLAD WIRE COMING OUT OF IT. ON THE INSIDE ARE TWO TUBES OR BATTERIES; ONE LARGE. ONE SMALL. IT LOOKS TO BE IN VERY GOOD COSMETIC CONDITION. NO DENTS, LITTLE CORROSION. APPEARS SOLID. NO IDEA WHAT ALL MAY BE MISSING-THIS IS AN AS-IS. AS FOUND* SALE.WHAT YOU SEE IN PHOTOS, IS WHAT YOU GET*AGAIN, UNTESTED VINTAGE ITEM* PLEASE BE CERTAIN TO STUDY PHOTOS ... moreFOR EXACT ITEM YOU WILL RECEIVE. CHECK OUR EXCELLENT 100% RATINGS-AND BID WITH CONFIDENCE.
Excellent Heathkit 100 kHz external crystal calibrator. This unit connects via a BNC cable(not included) It uses a 9 V battery. Which I must remove before shipping(dead anyway) Includes the tall100 kHz crystal. Untested because my scope is still packed away. Payment must be received within 10 days or item will be re-listed. International bidders must pay in US Dollars by PayPal. If you are near to SC shipping will be cheaper. Flat rate shipping fee is for continental USA only.
Tektronix 067-0502-01 Amplitude Calibrator/Comparator Tested Through Ranges Covers 0.2mv To 100V& 5ma(For Current Probe Cal. Reliable Well Built! Excellent For Calibrating O'scopes! Exc/See Pics!
LEEDS& NORTHRUP(Model 75841) Hello! and thank you for looking at my item. Up for bids is a vintage and used Standard Condenser Calibrator. The unit was not tested but given a detailed inspection. Unit has names and marking dating back to 1926. The unit itself was later calibrated later in 1938. The exterior is made of nice wood. The shell can use some refinishing. I’m not sure what it was used for other than calibration condensers by Leeds& Northrup. All of the parts appears to be present. This item is defiantly one of a kind. I have seen no others like it listed nor can I find a lot of information about it on line. This is most likely to be a collectable and would make an excellent edition to any vintage test equipment collection. Check my feedback and buy/bid with confidence! All of my listings come with fast shipping. Items paid ... morefor through pay pal before 2:00pm Monday– Friday will ship the same day. Items paid for through pay pal on Saturday or Sunday will ship on the following Monday. Please be sure to check out my other items in my store. Please feel free to contact me if there are any questions. Thank you for looking at my item(s) and Happy Shopping! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
1. Condition: Used in Working Good Condition 2. Includes: Calibration box. Power cord, Instruction book 3. Description: Temperature Calibrator to 400 degrees max. temp. 4. Note: Please take a look at the images! Make sure that the item is exactly what you need! This unit powers up and work fine. This unit is an As Is sale and there are no guarantees expressed or implied Happy Ebaying! The pictures represent the actual item! The item was carefully packed and is ready for shipment! Attention US PayPal users- We ship to US Confirmed Addresses only! We DO combine shipping! Please take a look at our auctions for other items available! No local pick-up will be allowed! Please bid on the item ONLY if you intend to pay for it! Thank you! Please read carefully before bidding! Terms and Conditions: We try to describe the auctioned items at our best. ... morePack them with care, and ship them promptly. If the item was misrepresented or arrived not working, when it was declared as working, the buyer is eligible for a refund or replacement(where available) Payment: We accept payments by all major Credit/Debit Cards and via PayPal. Sorry No Foreign bids. We do not ship outside the USA. Any payment must be received within the first 7 days after the auction's closing. A non-paying bidder will receive a negative feedback. Guaranteed. If you have any problem making your payment please email us. Shipping and Handling(S&H) We ship within the US. DO NOT BID, unless you can provide a US shipping address. Normally the items are shipped within the first two business days upon clearing the payment. We ship via the USPS/UPS. We ship to P.O. Boxes(via the USPS only) Items paid from the US PayPal account will be shipped to the confirmed address, no exceptions. We combine shipping costs for multiple items. Tracking is provided by request for the US Customers only. We are not responsible for any item lost or damaged in shipping; please insure your package. Please feel free to ask your questions. We will gladly reply to all emails related
Vintage precision capacitor? Not sure what it is. It just looks cool.
EDC Electronic Development Corp. 522 Programmable DC Calibrator For sale- an EDC Electronic Development Corporation Model 522 Programmable DC Calibrator with IEEE 488 GP-IB I/O. I think if you check out the pictures it’s easy to see that this thing is in excellent physical condition. I hooked up my VOM to it and at the lower end of the scale my meter was reading 0.01 volts high compared to the calibrator. In the upper ranges they were perfectly in sync. As my meter has not been calibrated I would attribute the difference to my meter but it’s certainly possibly that the calibrator might need calibrating. Otherwise it appears to be fully functional. Untested other than as pictured and described. Sold as is, and NO warranty is offered. However. IF you pay the asking price and find it has a problem you cannot live with within 14 days of receipt ... moreyou may return it. Returns are ONLY allowed on Buy It Now Purchases. Accepted Best Offers are strictly an as is sale. No returns allowed. Return would be for a refund of the purchase price. Not including shipping costs. Just so that we are clear on that. This is an item that has not been thoroughly tested. As such it may work fine or it may have problems. So any purchase entails a certain degree of risk. If you Buy It Now your risk is limited to the shipping costs both ways. If you submit an offer you do so knowing that you cannot return it. In either case it is up to you to decide whether the risk level is acceptable to you. And if not you need to pass on this particular item. Please check out my other listings for more interesting lab. Test, and optical equipment. Check back often! Sold as is. As described, as pictured. Potential buyers are asked to please make sure you have read the listing carefully. And understand what you are buying. Ebay’s condition codes for used items. Which I am now required to select from, might imply a degree of functionality that my limited time, knowledge, and facilities do not allow me to ascertain. If the functional condition of the item is kn
For sale a Druck DPI 602 Portible Pressure Indicator/Calibrator. Includes the unit. Manual, and power adaptor. USA(lower 48 states) Canada Only*
Retired from San Jose state university. Powers up. Im not a technician, so further testing was not done. Sold in untested condition. No refunds or returns, but odds are it works. Standard power cord not included. Ships to lower 48 only for rate quoted.
This listing is for a Fluke 705 loop calibrator with soft case and leads- no hard case for Fluke Any questions please feel free to ask. Thanks for looking.
BETA Model 320 Pressure Calibrator& Loop Power Supply ENGINEERING 0-30 PSIG/0-3000 PSIG Condition: USED this unit powers up we did not check the function it has the battery charger and the cables ACTUAL ITEMS ARE SHOWING IN PICTURES 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEE L FREE TO Call us@ 248-521-7777 thank Please allow 4-6 days for shipping and handling. Thank you. If you are not satisfied with your auction item. For any reason, please feel free and return it for a full refund of your purchase price. If you are not happy, we are not happy.
PARTS/REPAIR Electronic Development 520A/LMSC Programmable IEEE488 DC Calibrator PARTS/REPAIR Electronic Development 520A/LMSC Programmable IEEE488 DC Calibrator Details: Manufacturer: Electronic Development Corp. Model: 520A/LMSC Condition: Good cosmetic condition with some signs of previous use(See photos for more detail) Tested: Unit powers on. But smoke comes from the power supply. Needs fixed. Warranty: Unit sold"as-is" SKU: 398992 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to ... morepurchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax form is provided for our records. We cannot process the order until we receive sales tax or a copy of your CA. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replacement or refund. We can not warranty compatibility with your equipment. Or warranty items that have been modified or altered.
You are looking at a Hart Scientific 9009 dry well calibrator. The unit was just removed from service always taken care of. Comes with 7 vessels and removal clip and power cord. The specifications are listed below. We will ship this unit anywhere in the lower 48 states for 40.00 S/H we will offer a 14 day return minus S/H. Thank you for looking and good luck. The Fluke Calibration Model 9009 industrial dual-block calibrator lets you calibrate at hot and cold temperatures at the same time. Double your productivity or cut your calibration time in half with the 9009. The 9009 includes two independently controlled temperature blocks. The hot block provides temperatures from 50°C to 350°C. While the cold block covers the range–15°C to 110°C. Each block is controlled by a precision temperature controller. Each temperature block ... morein the 9009 includes two wells with removable inserts. You can calibrate four probes at once. Or you can calibrate two probes at the same time with an external reference. With the 9009, you can use the two temperature wells to get quick"zero" and"span" references for transmitter calibrations. The 9009 industrial dual-block calibrator is housed in a tough Pelican™ case that is both airtight and watertight. Although this small package weighs only 10 pounds. The 9009 calibrator fits everything you need including a power cord and four extra inserts. Inserts are available to accommodate sensors of any size from 1/16" 1.6 mm) to 7/16" 11.1 mm) The cold block is calibrated to within ±0.2°C with stability of ±0.05°C. The hot block's display is accurate to ±0.6°C with stability of ±0.05°C. A NIST-traceable calibration is included for each of the two test blocks. For use with automated systems. The 9009 comes with an RS-232 connection and Model 9930 Interface-it software, which allows you to control and monitor temperatures from your PC. The 9009 includes two 1/4" 6.4mm) and two 3/16" 4.8mm) inserts. Ad
This auction is for one used Heathkit Model IG-4505 Oscilloscope Calibrator. Unit powers up and power indicator light illuminates. Dials turn and all switches actuate correctly. Unit has not been tested beyond that. Returns are accepted. This unit is used and in excellent cosmetic condition. Several minor scratches on top of unit. Only the unit will ship. No box or instruction manual available. instruction manual can be found online) See pictures for condition. The Heathkit Model IG-4505 Oscilloscope Calibrator is an accurate. Crystal-controlled, fast-rise square wave generator. It provides you with the accurate time and amplitude signals needed to calibrate Heathkit and other brand Oscilloscopes. The time(or period) signals(5 s to 1 us) are the fast-rise(less than 4 ns) square waves you need to adjust oscilloscope sweep speeds, delay line ... moreterminations and high frequency compensation. A terminated output cable prevents ringing and assures a good frequency response of the time signal. The accurate voltage signals(1 mV to 100 V) are used for oscilloscope vertical calibration and attenuator compensation. The calibrator also serves equally well as a bench standard. It can be used to calibrate other test equipment or as a signal source when you build or test experimental circuits. Any questions please ask. Thanks!
Eye-one display 2 USB display calibration device. In original packaging. Fully functional. Please check software compatibility on your machine before purchase- you can download required software from xrite.com. Newer Macs(OS X 10.8 and later) may require using the Windows version of the software in a Virtual Machine.
Up for bid is a lot of pressure standards and gauges. One 0-100 psi Druck DPI 601 Recently serviced and all internal pressure hoses replaced to avoid leaks. I verified the current and voltage functions as well. The Martel Pressure calibrator is 0-300 psi with an accuracy of ± 0.05% of reading. And has also been calibrated. The Druck LP1000 Low Pressure Sensor is +/ 1 in-H2O. I don't know how to set the zero on this unit. other pressure gauges shown on pics are added to the lot as freebies along with the Druck LP 1000 Low Pressure Sensor. All Items are sold As Is. No returns or refunds. Please ask any questions you may have before bidding. And Thank you for Looking. Happy Bidding.
Altek Loop Calibrator Model Numbers: 334A S/N: 8261030 This calibrator has been kept in storage and is in excellent condition. The last time it was calibrated was in 2003. This listing includes the calibrator. Manual, travel case, and original box. Please take the time to look through all of the pictures in this auction and feel free to ask any questions you may have. This will ship in the original box as shown in pictures. 24794502]72]
Item is a Liberty Technologies Model MCC-100 Mini'C' Calibrator Clamp. We purchase these items surplus. This item is used. Item was removed as surplus from a working environment. Item appears to be in good shape. We cannot test this item. May need to be calibrated.
I purchased this Lab Grade Unit for use in my shop and it has served me well! This unit is in Excellent Clean condition! It is most useful in calibrating an Oscilloscope or anytime you are testing a piece of equipment and need to inject a calibrated time-marker signal. There are plenty of pictures. So please look at them and ask any questions. Notice how clean and well laid-out this unit is designed with the covers off. This unit is very easy to calibrate. I will include a binded xerox copy of the instruction manual, which is all that I have used with this unit. I performed the following performance checks and tweaked a few calibration adjustments so that the readings were right on the money. Instead of the usual plus or minus 5% or 1% allowance. Besides the Tektronix 2901, I used the following equipment to performance check the unit; a Tektronix ... more191 Constant Amplitude Signal Generator, a B&K 1822 Freq. Counter, a Heathkit IM-2410 Freq. Counter, a Sencore AC Powerite Variable Isolation Transformer, a Tektronix 453 A-2 Oscilloscope, and a Craftsman Professional True RMS Multimeter. 1. the-30v supply w/in 5% read-30.08v w/in spec.s. I went ahead and adjusted to-30.01v 2. the +3.6v buss w/in 5% read 3.48v w/in spec.s. I left that one as is. 3. t he Crystal Oscillator Frequency was check stable at 10MHZ using a B&K 1822 Frequency Counter. picture 7 shows this) 4. I checked the output of the 50nano second Marker Output. Within spec.s 5. I checked the 5 micro second Marker Output. Spacing was correct and amplitude exceeded.5v per division( pictures 7 show the 2901 generator set for 5ms, pic 8 shows the scope picture from my Tektronix 453-A2 and pic 9 shows the scope time/div setting at 5ms. 6. I checked the Marker Amplifier at 25v peak minimum. With a negative going setting. pic 10 shows the 2901 marker amp. set to the neg. position. pic 11 shows the scope picture, with properly spaced negative markers at 30v peak which exceeds the spec.s.if you notice further the input is into channel one of the sc
Rare Lafayette Crystal Calibrator switches 100 Khz or 1 Mhz works on 100 Khz only 1 Mhz crystal is good but no output on 1 Mhz great condition
Good RONAN X88 LAB CALIBRATOR with AC Adapter. Probes& Case
Omega cl700a block calibrator nice unit in the case. Get a great deal on this today. What you see in pictures is what you get.
Good. Working Druck DPI 811 RTD/ Loop Calibrator with Cables and Manual
Fluke 5720A Multifunction Calibrator. Purchase Includes 30 Day Warranty. Calibration Certificate and 14 Day Right of Refusal. Since its introduction in 1988. The 5700A Multifunction Calibrator has earned a worldwide reputation for performance, dependability and quality, and as a result it is the calibrator of choice for electrical calibration throughout government and industry. Today, the 5720A Multifunction Calibrator offers even more. In addition to the dependability, simplified calibration, ease-of-use and worldwide support that has made the 5700A number one, the 5720A offers uncertainty specifications that rival anything available today. Customers can get all the performance they need to calibrate their most demanding workload of multimeters up to 8 1/2 digits quickly, easily and reliably. This improvement in performance results from ... morefactory testing to even tighter tolerances, and from a variety of hardware and firmware improvements. Specifications available at both 99% and 95% confidence levels. Specifications for both the 5700A and 5720A Multifunction Calibrators are stated with a choice of confidence levels. Now. You can use the conservative 99% specifications that Fluke traditionally publishes, or more aggressive 95% specifications recommended in many international procedures. In addition to allowing you to trade a small amount of risk for better performance, 95% confidence level specifications allow easier measurement intercomparisons. Both specifications are available at a press of the SPEC key for any output. Compatibility. Both the 5700A and 5720A Multifunction Calibrators can emulate. Via the remote interface, either a 5100B or 5200A calibrator, permitting them to replace those older calibrators in automated systems with little or no impact on software. In addition, it is compatible with the 5725A Amplifier, and 5205A or 5215A Precision Power Amplifiers. Simplified support with complete confidence. Both the 5700A and the 5720A Multifunction Calibrators feature Artifact Calibration. Only three arti
This is a calibrated Zerodur for the ball bar system. In good shape and works well. Any questions let me know.
Search our eBay Store! Data Precision 8200 6.5-Digit DC Voltage/Current Calibrator Standard 25W PARTS SKU: JV-LEV-A-8200DATPREC Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Data Precision 8200 6.5-Digit DC Voltage/Current Calibrator Standard 25W PARTS BEING SOLD AS-IS FOR PARTS OR REPAIR. Model: 8200 This unit does not power on; a buzzing noise can be heard inside when attempting to power this unit on Unit's control panel. Knobs, ports, button, and display are all intact There are various scratches. Scuff marks, sticker marks, and paintwear present throughout ... morethis unit Unit has mismatched screws and is missing 4 screws from its cover All rubber footing are intact Unit Dimensions(L" x W" x H" 17 x 13 x 4 1/5 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10, with 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regu
PLEASE CAREFULLY READ TERMS 1&2 BELOW. PLEASE DO NOT BID IF YOU CANNOT COMPLY WITH TERMS. OMEGA CL100MA 4-20mA LOOP CALIBRATOR FOR PARTS NOT WORKING Powers up. But is out of adjustment. Unable to adjust or repair. PLEASE READ CAREFULLY Thanks for looking at this auction! We are selling this item on behalf of a Department of Defense(DOD) contractor. Due to restrictions placed on us by the consignor. This auction does have stricter terms than our regular auctions and those terms are firm. Please read the following two terms carefully. And if you cannot comply with them please refrain from bidding on this item. This auction is not open for International bidding/shipping- no exceptions. TERM 1 DECLARATION OF U.S. RESIDENCE By bidding on this auction I hereby declare that I am a lawful permanent resident of the United States. I also certify ... morethat my business affiliation. To include any corporation, business association, partnership, society, trust or any other entity, organization or group of which I am a participant is incorporated in the United States or otherwise under the jurisdiction of the U.S. Laws. Lawful permanent resident for purposes of this instruction”. means the status of having been lawfully accorded the privilege of residing permanently in the United States as an immigrant in accordance with the immigration laws. Such status not having changed, “8 USC 1101(a)20) A lawful permanent resident also includes “protected individuals” defined as an individual who is a citizen or national of the United States, or is an alien who is lawfully admitted for permanent residence, is granted the status of an alien lawfully admitted for temporary residence, is admitted as a refugee, or is granted asylum. 8 USC 1324b(a)3. TERM 2 VALIDITY/WARRANTIES THIS PRODUCT IS SOLD AS-IS. WHERE IS AND WITH ALL FAULTS. THERE ARE NO WARRANTIES, AND NO WARRANTY OF MERCHANTABILITY, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. ALL SALES ARE RESTRICTED TO U.S. RESIDENTS WITHIN THE UNITED STATES. IN NO EVENT WILL BUY
This is a working functional air monitoring system. 2 of the 5 air monitors are labeled bad battery and don't charge the other 3 work fine.
This Meter is fully operational. Bright Backlight. Very clean. Comes with carrying case. Back up Battery Pack. Accessory kit including temperature probe terminal connections extended leads alligator clips. And operation manual on all functions.
This listing is for a used Vaisala HMC20 digital relative humidity calibrator. Tested and in good working condition. No additional items are included. Pictures are of the actual calibrator being sold. An 8.25% tax is applied to all sales transactions made within the state of Texas.
This listing is for a used Transcat 5836P digital pressure calibrator. Tested and in good working condition with typical amounts of dings, scratches, and general wear. No additional items are included with this listing. Pictures are of the actual calibrator being sold. An 8.25% tax is applied to all sales transactions made within the state of Texas. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14bf796f8d4-0x109-
Up for auction is a KING NUTRONICS MODEL 3666 AUTOMATIC PRESSURE CALIBRATOR. This was purchased in an auction with a lot of other heavy equipment. I do not know if this works properly or not. Being sold as is. I did use a power cord that I have and plugged the unit in. The unit powered up(power light came on) That is all the testing I've done. It did have a printed piece of paper that looked like it was printed from the unit inside the case. Does not come with any power cords or other cables. Being sold as is/ parts. See pics for best detail. You can find out more about the unit here at king nutronics website. Happy bidding!
works great but does have engraving on it.from my personal collection of test equipmentshipping is $6located in section kk 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-14bf7993237-0x113-
Crystal Calibrator Model 111-B- Measurements Corporation Boonton NJ Up for bid is a Crystal Calibrator Model 111-B produced by the Measurements Corporation of Boonton New Jersey being sold in USED& UNTESTED condition. The unit is in VERY GOOD condition in overall appearance. The unit does power up but I have NO means to test the unit for proper working condition. This piece is from an older gentleman who is downsizing his extensive collection of electronics. Please review all photos for details before bidding. Method of payment is PayPal ONLY. PA buyers must pay PA sales tax. U.S. 50 states shipment only.NO International shipping. Thank you!
ColorMunki Display Color Calibrator. P/N: CMUNDIS. Manufacturer: Pantone. Advanced Display Calibration Made Easy for Color Perfectionists For creative folks who demand professional quality coupled with an easy. Wizard-driven interface, ColorMunki Display offers everything you could possibly need to get you to a brilliantly-calibrated display or projector while helping you stay focused on doing what you love. For Color Perfectionists seeking simplicity, the ColorMunki Display will absolutely amaze you. Item Weight: 1lbs. Dimensional Shipping Weight: 1lbs. UPC: 848826026466, SKU: CMUNDIS, Product Type: Color Calibrator, Manufacturer: X-Rite. Inc, Product Model: CMUNDIS, Product Line: ColorMunki, Brand Name: X-Rite, Terms and Conditions Domestic orders are shipped within 2 business days from payment processing. Please be aware that your order ... moremay be processed on the following business day after you check out. All domestic shipping is via UPS or Fedex Ground service. Please contact us for Overnight and Second Day Air shipping before you place your order. International buyers: You are purchasing a product designed for use in North America. The power and transmission requirements may be different then in your local country. Please make sure to follow all applicable use and safety regulations. Shipments for international export. PO Boxes, Puerto Rico, US protectorates, military addresses, and Canada require an additional 3-4 business days of processing time before shipment. International and Postal Shipments: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the recipient's responsibility. Please check with your country s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. Please do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" beca
Last one! This Unit is Being Sold AS-IS for Parts or Repair Used Druck DPI 510 Pressure Controller/Calibrator 1 PSI and 5 PSI This unit DOES NOT power on(even with a fuse installed) Fuse and fuse holder missing, top and bottom cover are missing screws(I'll try to find some before shipping) and it appears there are parts missing from the interior(compared to other units) display does not light up and nothing happens when buttons are pressed. If you would like additional testing, and its something you can walk me through, I'd be more than happy to try, just contact me. No power cord. No probes. Accessories, or manuals are included
Padded foam carrying case- complete with calibration cable and 110 VAC charger. Unit powered up fine. Unsure of exact model# PAYPAL ONLY