In 
 
Order by: 
Available to: 
Price: 
 - 
$
20.21
Buy It Now
Free Shipping
Condition: New
Location: China
Description:1. Both end of the adapters are the SC connector.2. To ensure the optical power stay in a stable level on its original transmission wave.3. ... moreThe fiber optical attenuator applies to single mode or multimode.4. High attenuation accuracy, low added loss and good stability.7. Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation.Specification:SC: Subscriber ConnectorConnector: SCAdjustable Attenuation Value: 0-30dBFiber Mode: 9/125 Single mode / 62.5/125 Multi-modeOperation Wavelength: 1310nm, 1550nm, 850nm, 1550nmOperation Temperature: -40 to +75°CMaterial: Metal, PlasticColor: Green , SilverTotal Size: 37x22mm / 1.46x0.87-inch(L*D)Package Included: 1 pcs x Fiber Optic Attenuator.
$
399.00
Buy It Now
$17.05 Shipping
Condition: Used
Location: Lafayette, United States
WE DO WORK DILIGENTLY TO ATTEMPT TO GET AS MANY OUT AS POSSIBLE SO THERE ARE NO DELAY'S IN YOUR ORDER. We are only capable of plugging an item in to see ... morewhether it power's or not. TESTED PRIOR TO REMOVAL FROM A FUNCTIONING SYSTEM.
$
128.99
Buy It Now
Free Shipping
Condition: New
Location: China
MT3 the thread is M12. Note : MT refers to Morse taper, for example: MT2 refers to Morse No. 2 cone. 16 refers to the size of the table in front of the ... moresaw blade, that is to say, the size of the matching hole with the saw blade.
$
99.00
Buy It Now
Free Shipping
Condition: Used
Location: Haverford, United States
OSI Optoelectronics PIN-10DPI/SB Silicon Photodiode. Excellent condition.
$
166.49
Buy It Now
Free Shipping
Condition: Used
Location: Indian Trail, United States
POWERS UP LOOKS CLEAN.
$
8.33
Buy It Now
$3.75 Shipping
Condition: Neu
Location: China
Recommend. BUY IT NOW, 90~250V 10A Digital Temperature Controller-50~110℃„ƒ Sensor Thermostat Control Navigation: Features: Specifications: Features: ... moreA mini temperature controller. With large and clear LED display for better readability. Wide temperature measuring range. Heating and cooling control. Temperature calibration function. Delay protection function. All parameters can be set to default setting after short circuit. Can be used for domestic freezer. Water tanks, refrigerator, industrial chiller, boiler, steamer, industrial equipments and other temperature-controlled systems. Specifications: Working voltage: 90~250V±10% Rated current: 10A Power consumption: ≤3W Measurement range: 50~110 Celsius degree Measurement precision: 0.1 Celsius degree Measurement error: ±0.3 Celsius degree Control precision: 0.1 Celsius degree Working temperature:20~70 Celsius degree Temperature sensor: NTC 25 Celsius degree=10K B3435 Item size: 8.5*7.5*3.5cm/ 3.4*3*1.4in Item weight: 93g/ 3oz Package size: 11*8.5*4.3cm/ 4.3*3.4*1.7in Package weight: Approx. 125g/ 4.4oz Package Includes: H10126 1* Temperature Controller 1* Temperature Sensor 1* Instruction Manual. If you want to buy different color or similar items. Please click the following photos to visit my eBay store. Thanks. Payment: 1. We accept payment via PAYPAL ONLY. 2. Payment must be made within 4 days of auction closing. 3. TOTAL AMOUNT DUE includes the final auction price plus S&H(Shipping and Handling) 4. S&H will be determined based upon the SHIP TO address. PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES. LOCATL TAXES OR ANY OTHER IMPORTATION FEES. 5. Please list your special requests(color. Packages, etc. in the PAYPAL NOTES SECTION when you make payment. Shipping: 1. WORLDWIDE SHIPPING. Except China.Belgium, Luxembourg, Italy, Germany and Croatia) 2. Orders processed within 24-48 hours of payment verification. 3. We only ship to confirmed PAYPAL addresses. Your PAYPAL address MUST MATCH your Shipping address. 4. The images shown are not the actual
$
2.99
Buy It Now
$3.00 Shipping
Condition: New
Location: China
When the right “OUT” led light, it shows output, the left “IN” led show input. 3 、 Output current:2A. 6 、 Built in output short protection function. 5 ... more、 Input reverse polarity protection. How to adjust the accuracy?.
$
7.87
Buy It Now
$3.45 Shipping
Condition: Neu
Location: China
Recommend. BUY IT NOW, 90~250V 10A Digital Temperature Controller-50~110℃„ƒ Sensor Thermostat Control Navigation: Features: Specifications: Features: ... moreA mini temperature controller. With large and clear LED display for better readability. Wide temperature measuring range. Heating and cooling control. Temperature calibration function. Delay protection function. All parameters can be set to default setting after short circuit. Can be used for domestic freezer. Water tanks, refrigerator, industrial chiller, boiler, steamer, industrial equipments and other temperature-controlled systems. Specifications: Working voltage: 90~250V±10% Rated current: 10A Power consumption: ≤3W Measurement range: 50~110 Celsius degree Measurement precision: 0.1 Celsius degree Measurement error: ±0.3 Celsius degree Control precision: 0.1 Celsius degree Working temperature:20~70 Celsius degree Temperature sensor: NTC 25 Celsius degree=10K B3435 Item size: 8.5*7.5*3.5cm/ 3.4*3*1.4in Item weight: 93g/ 3oz Package size: 11*8.5*4.3cm/ 4.3*3.4*1.7in Package weight: Approx. 125g/ 4.4oz Package Includes: H10126 1* Temperature Controller 1* Temperature Sensor 1* Instruction Manual. If you want to buy different color or similar items. Please click the following photos to visit my eBay store. Thanks. Payment: 1. We accept payment via PAYPAL ONLY. 2. Payment must be made within 4 days of auction closing. 3. TOTAL AMOUNT DUE includes the final auction price plus S&H(Shipping and Handling) 4. S&H will be determined based upon the SHIP TO address. PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES. LOCATL TAXES OR ANY OTHER IMPORTATION FEES. 5. Please list your special requests(color. Packages, etc. in the PAYPAL NOTES SECTION when you make payment. Shipping: 1. WORLDWIDE SHIPPING. Except China.Belgium, Luxembourg, Italy, Germany and Croatia) 2. Orders processed within 24-48 hours of payment verification. 3. We only ship to confirmed PAYPAL addresses. Your PAYPAL address MUST MATCH your Shipping address. 4. The images shown are not the actual
$
7.87
Buy It Now
$3.45 Shipping
Condition: Neu
Location: China
Power Suppler : DC 12V/24V AV 220V. With large and clear LCD display for better readability. Upper and lower limits of temperature can be set. Sensor ... moreType: NTC (10K/3435). Working temperature: 0- 50°C.
$
714.52
Buy It Now
$49.28 Shipping
Condition: Gebraucht
Location: Netherlands
What you see is what you get. If it is not in the picture it is not included in the sale- for example power cables, adapters,batteries, probes, manuals. ... moregood condition as pictured. item is for sale AS IS.
$
271.03
Buy It Now
$49.28 Shipping
Condition: Neu: Sonstige (siehe Artikelbeschreibung)
Location: Netherlands
Price is for 1 probe, new without box. What you see is what you get. If it is not in the picture it is not included in the sale- for example power cables, ... moreadapters,batteries, probes, manuals.
$
394.89
Buy It Now
$41.39 Shipping
Condition: Neu
Location: Hong Kong SAR China
MASTECH MS7220 THERMOCOUPLE CALIBRATOR MIB-INSTRUMENTS"Can Buy It Now in my ebay store" MS7220 THERMOCOUPLE CALIBRATOR FEATURES MS7220 Thermocouple ... moreCalibrator is a precise source and measurement tool for calibrating thermocouple instruments through a thermocouple mini jack. The calibrator can be indicated in units of °C. °F, or mV. Measure temperature from TC output• Simulate TC output• Operable with eight types of thermocouples• Calibrate linear TC transmitter with mV source function• Selectable °F or °C SPECIFICATIONS Measure/ simulate thermocouple Measure/ simulate mV Range-200 to 1800°C. Depending on type-10 to75mV Resolution 0.1°C 0.01mV Accuracy ±(0.3°C + 10µV) ±0.02% Note: 8 TC types; J K T E N R S B per NIST 175 and ITS-90 Weight: Approx. 350g(including battery) Size: 190mm × 89mm × 42mm Battery: Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V Payment Shipping We accept Paypal. Credit card through Paypal. Buyer may need to pay for import tax depend on your country's custom. You can ask us for more detail. We ship to international and item will be shipped by airmail from HongKong. Items are shipped within 2-3 business day after receive cleared payment. An additional USD8 for insurance Most item will arrive within 8-14 business days. It depend on your location. In some case. Ship to some countries will take over 3 weeks, especially brazil. Italy and France. My Other Auctions My eBay Store MIB-INSTRUMENTS Image hosting and auction templates from www.MIB-INSTRUMENTS.com. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
1769.06
Buy It Now
$49.28 Shipping
Condition: Gebraucht
Location: Netherlands
Works on versie 1.39.1003 as pictured, laptop/screen not included. What you see is what you get. If it is not in the picture it is not included in the ... moresale- for example power cables, adapters,batteries, probes, manuals.
$
32.00
Buy It Now
$3.00 Shipping
Condition: New
Location: 福田区, China
•Patented Silicon Shear Stress Strain Gauge. •Temperature Compensated Over 0°C to + 85°C. We will reply you ASAP.
$
21.92
Buy It Now
$1.89 Shipping
Condition: New
Location: 秀屿区, China
Quantity: 3120pcs (20pcs in each type). Resistance: 1 ohm ~ 10M ohm. Valves: 156 valves. Color: as picture shows. Size: about 6 2mm/0.23 0.07" (L Dia.).
$
66.65
Buy It Now
$6.75 Shipping
Condition: New
Location: China
10A, 25A, 40A, 60A, 80A, 100A. AC 80-250V to AC 24-480V Solid State Relays Module Single Phase SSR. Number of Phases: Single Phase. Note: The solid state ... morerelay generates a lot of heat. When the load current is greater than 10A, it needs to be used with a radiator.
$
10.21
Buy It Now
$2.99 Shipping
Condition: New
Location: China
Output anti-reverse irrigation;. Output power: natural heat dissipation 35W, strengthen heat dissipation 50W. You can see a bit of the setting constant ... morecurrent value flashing. Soft start: yes (with high power and load module may fail when starting).
$
965.29
Buy It Now
$41.39 Shipping
Condition: Neu
Location: Hong Kong SAR China
MASTECH MS7212 MULTI-FUNCTION PROCESS CALIBRATOR MIB-INSTRUMENTS"Can Buy It Now in my ebay store" MS7212 MULTI-FUNCTION PROCESS CALIBRATOR FEATURES• ... moreMeasure V. MA, Ω, frequency, temperature, 40000 reading max• Source V. MA, frequency, high resolution, voltage and current is scale up in 0 to 99 steps, and output echelon voltage and current• With PC photoelectricity interface. Transfer the results to a PC, save and print transfered data and data waveform in special software• With measure and source two functions. Show and control in double display• 32 function keys and numeric keys. Setup and modify source value by numeric keys in source mode Output power: 15V 25mA SPECIFICATIONS Measure(DMM) Range(full scale) Accuracy( of reading + digits) 400.00mV DC 4.0000V DC 40.000V DC 300.00V DC 400.00mV 4.0000V AC 40.000V AC 300.00V AC 400.00mA DC 400.00mA AC 400.00Ω 4.0000kΩ 40.000kΩ 400.00kΩ 4Hz ~ 99.99Hz 100Hz ~ 5Hz 5kHz ~ 30kHz-50°C ~ 1300°C 0.025% + 10 0.025% + 5 0.025% + 5 0.025% + 5 0.7% + 20 0.7% + 10 0.7% + 10 0.7% + 10 0.1% + 10 0.7% + 10 0.1% + 10 0.1% + 10 0.1% + 10 0.1% + 10 0.05Hz 0.5Hz 2Hz 0.3% + 1°C Source Range(full scale) Accuracy( of reading +% of full scale) 100.000mV DC 5.0000V DC 15.000V DC 25.000mA 20Hz ~ 5000Hz 0.025% + 0.03% 0.025% + 0.02% 0.025% + 0.02% 0.02% + 0.02% 0.02% You can download the reference files from Payment Shipping We accept Paypal. Credit card through Paypal. Buyer may need to pay for import tax depend on your country's custom. You can ask us for more detail. We ship to international and item will be shipped by airmail from HongKong. Items are shipped within 2-3 business day after receive cleared payment. An additional USD8 for insurance Most item will arrive within 8-14 business days. It depend on your location. In some case. Ship to some countries will take over 3 weeks, especially brazil. Italy and France. My Other Auctions My eBay Store MIB-INSTRUMENTS Image hosting and auction templates from www.MIB-INSTRUMENTS.com. Powered by The free listing tool.
$
140.00
21h 56m 33s
0 bids
$20.00 Shipping
Condition: Used
Location: Canada
$
566.69
Buy It Now
$49.28 Shipping
Condition: Gebraucht
Location: Netherlands
This meter is like new. I purchased it about 5 years ago new. I remember when I was shopping around for this meter that Fluke just had bought them out ... moreand this was one that was being sold to eliminate the stock that came with the buy-out. If you compare it to a Fluke of that time. You will see it is identical. A fluke like this now sells for $1,799, check it out for your self. This meter comes with all that you see in the pictures, case, test loop and meter. The instruction manuel has all pages. I used it only a few times. It works great. This meter is very easy to use. No need like the others that have the probes that you need to stick in the ground. All you do is set the dial to resistance and clip it over the ground wire and it gives you the reading. So simple it seems like you are missing something. It checks for ground leakage current in ma. and Amp too. Can be used as an Amp. probe too. Everything fits in this great little case and keeps it safe and clean. I always have stored this in my home in-between uses and now. Selling because I'm not in the business any more. Thank you
$
19.40
Buy It Now
Free Shipping
Condition: New
Location: China
Feature: 1. OCXO MODULE: 10MHz frequency reference source, crystal oscillator constant temperature module, which has stable output and good durability. ... moreItem Type: Frequency Standard Reference Module.
$
7.87
Buy It Now
$3.75 Shipping
Condition: Neu
Location: China
Power Suppler : DC 12V/24V AV 220V. With large and clear LCD display for better readability. Sensor Type: NTC (10K/3435). Upper and lower limits of temperature ... morecan be set. Working temperature: 0- 50°C.
$
15.99
Buy It Now
Free Shipping
Condition: New
Location: Miami, United States
POTENTIAL RELAYS.
$
20.00
Buy It Now
$4.00 Shipping
Condition: New
Location: China
Resistance reference is selected0.1%,25PPMChip resistance of the chip,The capacitors are ceramic chip capacitors,CBBcapacitance,Correction capacitance,Polyester ... morecapacitor,Monolithic capacitor,Nijikang Ruby electrolytic capacitor.
$
3.00
Buy It Now
$1.37 Shipping
Condition: New
Location: China
$
950.00
Buy It Now
Condition: New – Open box
Location: Biloxi, United States
What you see in photo is what you get. If you are looking at it, you know what it is and how much they cost new. The item may have flaws and/or defects ... morebecause this is a used item. Its approx. Just make sure you understand this is just so you can get a ballpark estimate on freight.
$
1.69
Buy It Now
$3.99 Shipping
Condition: New
Location: China
DC Power Jack Plug Socket Male Female Connector Adapter Panel Mount PCB Various. DC005 (5.5/2.1mm,Female Socket). DC002 (3.5/1.35mm,Male Jack Plug 9mm). ... moreDC005 (5.5/2.1mm,Male Jack Plug 9mm). DC005 (5.5/2.1mm,Male Jack Plug 14mm).
$
6.79
Buy It Now
$3.00 Shipping
Condition: New
Location: China
10 values, total 50 pieces ( each 5 pieces ). hope you could understand. Product Details. 1K 3296w-1-102.
$
178.00
Buy It Now
Free Shipping
Condition: Neu
Location: China
● Signalausgang und Simulation: 0-10 kHz Frequenz, 4-20 mA passive Signalquelle, 0-11 V, 0-110 mV, 20-400 Ω, Standard R, E, S, K, J, B, T, Thermoelement ... moreTyp N, PT100 , PT1000, CU50 Ausgang, 24V usw. ● Frequenzsignal, Gleichspannung, mV-Kleinsignal, Widerstandssignal, Gleichstrom, Thermoelement, RTD-Wärmewiderstandssignalausgabe und -messung, entspricht einem Prozesskalibrator und Digitalmultimeter. Es dauert ungefähr 7-15 Werktage nach Kanada; ungefähr 10-30 arbeitstage zu anderen ländern. Die Transitzeit kann sich aufgrund des schlechten Wetters und der Zollkontrolle etwas verzögern. Wenn Sie Ihren Artikel nicht innerhalb von 30 Werktagen nach Abschluss der Zahlung erhalten, kontaktieren Sie uns bitte umgehend for weitere Unterstützung. Wir streben for 100% Kundenzufriedenheit! Positives.
$
219.00
Buy It Now
$14.35 Shipping
Condition: Used
Location: Simi Valley, United States
$
149.94
Buy It Now
Free Shipping
Condition: New
Location: Sacramento, United States
It is also subject to change during peak periods. We work hard to include a lot of pictures of each item.
$
48.65
Buy It Now
$6.75 Shipping
Condition: New
Location: China
Suitable for Panel Mounting Hole Size: 22mm (Suitable for panels with a thickness of 1 mm to 6 mm.). Change-over Switch NO NC IP40. Position: 2 Position, ... more3 Position. - 1 NO 1 NC. Short circuit protection: NT00-16.
$
1.59
Buy It Now
$3.00 Shipping
Condition: New
Location: China
Can be applied to various 3.7V lithium core. 1 x lithium Battery Protection Board. Short circuit protection. Internal resistance: <60mΩ. Overcurrent protection. ... moreService life: >30,000 hours. hope you could understand.
$
17.49
Buy It Now
Free Shipping
Condition: New
Location: Bordentown, United States
Output anti-reverse irrigation;. Output power: natural heat dissipation 35W, strengthen heat dissipation 50W. You can see a bit of the setting constant ... morecurrent value flashing. Soft start: yes (with high power and load module may fail when starting).
$
6.94
Buy It Now
Free Shipping
Condition: New
Location: China
Input impedance:> 100K ohm. Display mode: three-digit round LED digital tube. Display color: red, green, blue optional. Working current. :Red
$
2.69
Buy It Now
$3.99 Shipping
Condition: New
Location: China
Available in following Models: 2000W (with Bracket);2000W (External Connection Type);4000W (with Housing);4000W (without Housing). Maximum power: 4000W. ... moreMaximum load power: 4000W. It can be flexibly adjusted by gently rotating the knob cap without adding any components, making the product practical and convenient.
$
369.58
Buy It Now
$49.28 Shipping
Condition: Gebraucht
Location: Netherlands
What you see is what you get. If it is not in the picture it is not included in the sale- for example power cables, adapters,batteries, probes, manuals. ... morewe don’t need it anymore. I bought it accidentally.
$
11.09
Buy It Now
Free Shipping
Condition: New
Location: China
Compact design, lightweight, solid and easy to install. Size: 5.1 x 4.5cm / 2 x 1.77". Material: Iron.
$
7.89
Buy It Now
$1.89 Shipping
Condition: New
Location: 秀屿区, China
Fully insulated connector, tin plated brass, vinyl PVC insulation. Color: red, blue, yellow. Quantity: 100 (40 in red, 50 in 50 in yellow). I send goods ... morewithin 12 hours.
$
12.91
Buy It Now
Free Shipping
Condition: New
Location: China
Descriptions: Features:with digital Calibration,Round knop cover,6mm Thread Hole Diameter. 360 degree rotary knob for easily control the potentiometer. ... morePotentiometer Rotary Knob is useful for connect the rotary Potentiometer, usually multiturn linear potentiometer which always use as volume control switch.
$
1290.17
Buy It Now
Free Shipping
Condition: Neu
Location: China
New CEM BX-350 Portable IR Calibrator for Long Distance Infrared Thermometer BX-350 Portable IR Calibrators BX-350 Portable IR Calibrators are used for ... morecalibrating long distance Infrared Thermometer. Which are designed as handhold and small calibrations. Whether you’re using in-line or handheld infrared pyrometers. You need a high performance calibration standard to verify accuracy. The portable IR calibrator features a large temperature controlled blackbody target with a diameter of 2.25’ 57mm) Which offers a wide field of view area for optical variations in IR thermometers. For even higher precision. A contact calibration well is located directly behind the blackbody surface. Using an optional digital RTD thermometer and calibrated secondary probe, accuracies of ±0.1 ℃ can be achieved. Features: 1. Large 2.25’ 57mm) blackbody target 2. RTD(Resistance Thermometer detector) reference well for high precision Specifications: BX-350 Temperature Range 50 ℃ to 350 ℃/ 122 ℉ to 662 ℉ Accuracy ±0.5 ℃@ 100 ℃/ ±1.0 ℉@212 ℉ ±1.2 ℃@ 350 ℃/ ±2.4 ℉@662 ℉ Stability ±0.1 ℃@ 100 ℃/ ±0.2 ℉@212 ℉ ±0.2 ℃@ 350 ℃/ ±0.4 ℉@662 ℉ Target size 2.25’57mm) Target Emissivity 0.95 Resolution 0.1 ℃/ ℉ Heating Time 30 minutes to max Cooling Time 30 minutes to max to 100 ℃ Power 230VAV( ±10% 1.5A; or 110V AC, 3A Size(H*W*D) 180mm*114mm*233mm Weight 2682g Applications: Accessories: Carton box. AC power cable PAYMENT We accept paypal or other payment terms. If there is any import duties or taxes.It is the buyer's responsibility. Please make payment within 5 days after you place your order. Please DO NOT place your order if you are NOT intend to buy. SHIPPING& DELIVERY We will ship out the unit to you by EMS or FedEx or DHL. It will decided by seller according to your location.EMS/Post Service Only for Russian Customers) We will ship out the unit to the Express company first. It will take about 2-3 days. And then express company will deal with the package, so you can check the tracking number
$
7.88
Buy It Now
$3.00 Shipping
Condition: New
Location: China
TDS probes cannot be used in water above 55 °C. The TDS probe should not be placed too close to the edge of the container, as it will affect the display. ... moreTDS probe 1 x TDS signal adapter board. 1 x Waterproof TDS probe.
$
119.95
Buy It Now
$8.95 Shipping
Condition: New
Location: Miami, United States
HP DESIGNJET T2530 36". HP DesignJet T940 36". HP DESIGNJET T1600 36". HP DESIGNJET T2600 36". HP DESIGNJET T2300.
$
13.89
Buy It Now
$2.79 Shipping
Condition: New
Location: China
Quantity: 1000pcs (10pcs in each type). 1000pcs 100 Value 1/2W Carbon Film Resistors. Color: as picture shows. Valve: 100 valves. Because, our prices ... moreare unable to include above fees, as the custom policies are different in every territories.
$
1.99
Buy It Now
$3.99 Shipping
Condition: New
Location: China
$
299.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Chattanooga, United States
Freight truck will not have a lift gate.
$
221.75
Buy It Now
$49.28 Shipping
Condition: Gebraucht
Location: Netherlands
Tested ok / Battery defect. What you see is what you get. If it is not in the picture it is not included in the sale- for example power cables, adapters,batteries, ... moreprobes, manuals.
$
4.65
Buy It Now
$3.99 Shipping
Condition: New
Location: China
It can shrink as soon as it is poured with boiling water! Shrinking temperature: 60°c. Color: Red/Blue/Gold/Grey/Green/Orange/Purple/Black. Breakdown ... moretemperature: ≥10KV/mm.
$
246.39
Buy It Now
$49.28 Shipping
Condition: Gebraucht
Location: Netherlands
This gauge appears to be in good working order. I have not tried to clean it or mess with it in any way. You will receive everything shown in the photos. ... moreIf you have any questions I will help you the best I can.
$
421.77
Buy It Now
$41.39 Shipping
Condition: Neu
Location: Hong Kong SAR China
Audio Video Accessory. Mini Switch / Selector. Loop power 24V ±10% The max.output current is 25mA. The max.overlaod is 1kΩ at 20mA range when the power ... moreis higher than 6.8V. The max.overlaod is 700Ω at 20mA range when the power is higher than 5.8-6.8V.
$
21.99
Buy It Now
Free Shipping
Condition: New
Location: La Puente, United States
Standard crimp and then seal heat shrink butt connectors. 100-300pcs Heat Shrink Butt Wire Crimp Connector. Apply heat to the two end of the connector ... moreto make it tighten up the wire. Red connectors: Suits cable/ wire sizes 0.5-1.0mm2 22-18 GA.
$
691.86
Buy It Now
$48.29 Shipping
Condition: Neu
Location: Kamenz-Umland, Germany
Interner Datenspeicher für bis zu 99 Werte. Nullplatte und Justierfolien inklusive. This results in a superior accuracy of approx. Pantalla LCD, retroiluminado, ... moremuestra toda la información de un vistazo.
$
16.99
Buy It Now
Free Shipping
Condition: New
Location: China
Quantity: 200pcs. Range: 0.001UF~2.2UF. Color: as picture shows. Value: 25 kinds. We will solver the problem for you with a satisfactory solution. Because, ... moreour prices are unable to include above fees, as the custom policies are different in every territories.
$
200.00
Buy It Now
Condition: Used
Location: Howell, United States
Concentration (Mole %) 1.0% (20% LEL) / Balance, CH4 / Air. 6D Contents: 3.6 Cu.
$
82.99
Buy It Now
Free Shipping
Condition: New – Open box
Location: Brooklyn, United States
Press and hold the power button for about 3 seconds to turn it on (the display lights up to show "FiiO"). Press and hold the multi-function button for ... moreabout 5 seconds to enter the pairing mode (the display shows 'pairing') after booting up.
$
6.10
Buy It Now
$3.45 Shipping
Condition: Neu
Location: China
Picture 3.1 PZEM-0 04T-10A Functional block diagram. AC communication module. Active power. 3 Functional block diagram. Power factor. Alarm status is ... more0x0000, i ndicates that the current power is lower than the alarm power threshold.
$
2840.70
Buy It Now
$12.95 Shipping
Condition: New – Open box
Location: Καλαμαρια, Greece
We try very hard to provide accurate product pictures and titles, in most cases, we take our own pictures unless they are provided to us by the manufacturer.
$
2.65
Buy It Now
$3.99 Shipping
Condition: New
Location: China
Rated Working Current (Ie) AC (50/60Hz) Resistive Load 5A 5A 5A 3A. Inductive Load 5A 5A 3A 2A. ● Suitable for Panel Mounting Hole Size: 16mm. ● Conventional ... morethermal current(Ith): 5A. Good electrical conductivity,stable performance, long service life, Optional with Illuminated Model (with lamp) or Non-Illuminated Model (without lamp), soft luminescence, not dazzling, bright colors, low energy consumption.
$
559.95
Buy It Now
Free Shipping
Condition: New
Location: West Lafayette, United States
ATTENTION: We are currently relocating to the new building. Regular shipment will resume the week of APRIL 15th. We sincerely apologize for the delay ... moreand any inconvenience it can cause. NEW DRO kit with 2 GLASS LINEAR SCALES for 9x42 Bridgeport Mill USA assembled scales. NO hidden FEEs, FAST shipping, US Warranty! 765) 588-4528 CUSTOMER SUPPORT LINE Welcome to ZS SYSTEMS LLC auction! We are proud to offer some of the most user friendly. Reliable and affordable DRO systems on the planet! These DROs are installed in our own machine shop and after years of trouble free service we are convinced that this package is simply the best in terms of quality, functionality and value. Kit comes complete with high precision Glass Grating Linear Scales and mounting hardware. Displays housed in a rugged Die Cast Aluminum enclosure. Watch out for cheap plastic replicas! Beginning January 2012 our scales are assembled. Tested and calibrated in the USA To make it even a better deal. All kits now come with a universal Mill/Lathe 3 axis display. All in one model can be switched between Mill, Lathe, and Grinder. Every unit is fully tested the day it leaves warehouse and comes with 1 year USA warranty. KEY FEATURES: 5 um(0.0002" resolution scales(display supports 0.1-10 um scales as well) Can be switched between Mill. Lathe, Grinder and EDM- Supports both English and Metric units(in/mm display) Absolute and Incremental measuring mode- Center line(1/2) function- Sub datum(200 points) Tool library(200 points) Linear drilling function Mill Mode- Bolt circle(PCD) machining in Mill Mode- Incline and oblique plane machining Mill Mode- Simple and Smooth Radius machining Mill Mode- Asymptotic machining of inner cavity(chambering) Mill Mode- Radius/Diameter function in Lathe mode- Taper function in Lathe mode- Axis summing in Lathe mode- Filter in Grinder mode- Linear and non-linear error compensation- Auto Zero/reference function- Calculator with trigonometric functions- Tool Compensation- Sleep Mode- Pow
$
39.00
Buy It Now
$3.00 Shipping
Condition: New
Location: 福田区, China
•Patented Silicon Shear Stress Strain Gauge. •Temperature Compensated Over 0°C to + 85°C. We will reply you ASAP.
1 2 3 4 5 6 7 8 9 10 11
 In 

Former Listings  
 
Vintage RCA Television Calibrator WR-39C
Vintage RCA Television Calibrator WR-39C Does not power on RF out chord came loose but is present Posted with
Dekavider Voltage Calibrator DV-411, accuracy 0,005% max input 250V
Dekavider Voltage Calibrator DV-411. Accuracy 0,005% max input 250V Do you need an extremely accurate Voltage Calibrator? This Dekavider. Made by Electro Instruments Inc. can divide any source voltage up to 250 Volt in any percentage value, from 0,001% to 99,99% with an accuracy of 0,005% You will be able to check and calibrate the linearity and accuracy of any instrument starting from any accurate voltage source up to 250V. Tested(no obvious faults) but NOT calibrated. Payment via Paypal; for other payments. Please ask. Shipping via Express Courier. Trackable. Bidders outside of Europe, ask for the shipping cost. Item will be sold as is. Where is with no warranty expressed or implied. Sorry. No returns. Vi serve un Divisore di Tensione precisissimo? Con questo Dekavider potrete verificare e calibrare la linearità di qualsiasi strumento. ... moreCon la precisione dello 0,005% Qualunque tensione di ingresso fino a 250V. può essere divisa in percentuale dallo 0.001% al 99,99% Provato(nessun problema evidente) ma NON calibrato… non ho gli strumenti necessari. ATTENZIONE! QUESTA È UNA VENDITA DA PARTE DI UN SOGGETTO PRIVATO CON FORMULA DI ESCLUSIONE DELLA GARANZIA. La legislazione vigente nell'unione europea prevede che anche i privati siano tenuti a dare garanzia sugli oggetti venduti. A meno che tale garanzia non sia esplicitamente esclusa al momento della vendita. In conseguenza di ciò, l'oggetto proposto è venduto"così com'è" con esclusione esplicita di qualsiasi forma di garanzia, per cui chi si aggiudica l'oggetto proposto, con la sua offerta accetta, incondizionatamente, l'esclusione di qualsiasi garanzia per l'oggetto stesso. Chi non fosse d'accordo con i termini esposti è pregato di non fare offerte. Accetto il pagamento con Paypal; per altri pagamenti. Chiedere. La spedizione avverrà via Corriere Espresso tracciabile. Non accetto restituzioni. gsrx_vers_486(GS 6.5.1(486) Di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B
Starrett 716 Dial Indicator Tester Carbide, Indicator Calibrator Gage Calibrator
Starrett 716 Dial Indicator Tester Carbide. Indicator Calibrator with t im ber box Online price $1500 USD Item condition: Used. It is in good working condition. Some tiny marks and scratches(see the photos please) Item included in this sale: What you see is what you get. Pick up available from Carlingford area. Combine Postage Discount available. Check out my other listings. More Detail about This Item: http:www.starrett.com/metrology/product-detail?k=716X http:www.transcat.com/catalog/productdetail.aspx?itemnum=716MX
ALTEK / LOOP CALIBRATOR / 334A
1. Manufacturer: ALTEK 2. Model no: 334A 3. All our goods will be tested before shipment and provide the photo and Video file of test result 4. We will ship via EMS. 5. If any further query. Please feel free to 6. For the shipping cost in case of not free shipping. Please inform your zip-code and will let you know exactly very soon 7. MET Item no: ETC-11-569 8. More Additional charge. We can ship the goods via DHL/UPS/FEDEX. If you want to get under your account. Please let us know. Shipping& Handling Goods will be shipped via your payment of shipping rate Normal Shipping with Tracking Number(Delivery time will be around 3-5 Days) Goods will be shipped 1-2 Days business day after buyer’s payment NO REFUND for Lost/Damage of goods by buyer Not Included Accessories/Connectors/Cables unless MENTION Import Duty& Tax(Bear by buyer) Return ... morePolicy: All of parameter(program) setting is responsible for Buyer Returns accepted within: 7 Days Refund is acceptable for defective item only within 7days after your receiving with RMA No. Return shipping by buyer’s payment All of return item. We’ll provide you our RMA No. Thus you have to contact us 1 st and get the RMA No. 1. If there is no stock to exchange I will refund money back 100% without shipping charges 2. Return items must be complete with box and accessories in 5 working days. 3. Buyer pays for all return shipping. 4. Money will be return after 1-2 days the goods received.
STACO E1010VA VOLT AMP METER BENCH VARIAC AC POWER SOURCE ADJUSTABLE CALIBRATOR
PLEASE CALL FREE 800-544-3746! LIVE HELP EXPERT ADVICE TECHNICAL SUPPORT 800-544-3746! PLEASE VISIT OUR EBAY STORE. FILLED WITH HUNDREDS OF UNIQUE AND USEFUL ITEMS! CLICK HERE TO GO DIRECTLY TO THE STORE SCROLL DOWN FOR IMPORTANT ITEM INFORMATION STACO E1010VA VOLT AMP METER BENCH VARIAC AC POWER SOURCE ADJUSTABLE CALIBRATOR PLEASE CLICK ON PHOTOS FOR LARGER VIEW SCROLL DOWN FOR IMPORTANT ITEM INFORMATION PLEASE READ ALL OF THE FOLLOWING TEXT BEFORE PURCHASING. IF YOU NEED MORE INFORMATION, PLEASE CALL ME AT MY TOLL FREE NUMBER 800-544-3746 9:00AM TO 6:00PM PST MONDAY- FRIDAY AND I WILL BE HAPPY TO ANSWER ANY OF YOUR QUESTIONS. YOUR PURCHASE IS FOR AN ALL AMERICAN MADE. FULLY RE-FURBISHED, TESTED AND GUARANTEED, STACO RESEARCH BRAND, MODEL E1010VA-LAB, RATED AT 120 VOLTS INPUT, 0-140V OR 0-120V@ 0-10 AMPS 0-1400 WATTS OUTPUT, BENCH TYPE VARIABLE ... moreAUTO-TRANSFORMER(VARIAC) WITH VOLTAGE AND DUAL RANGE CURRENT METERING IN BETTER THAN NEW CONDITION COMPLETE WITH A LIMITED LIFETIME WARRANTY! SEE ALL OF THE PHOTOS FOR DETAILS. SEE LIFETIME WARRANTY DETAILS BELOW, NOTE: UNIT MAY DIFFER SLIGHTLY FROM PHOTO) IMPORTANT NOTE: THIS IS A FULLY REFURBISHED. TOP QUALITY, AMERICAN MADE PRODUCT. THAT HAS BEEN COMPLETELY REFURBISHED INTO BETTER THAN NEW CONDITION. NOT A POORLY MADE COPY FROM CHINA! WE ONLY SELL THE VERY HIGHEST QUALITY VARIACS FROM U.S. COMPANIES THAT ARE BUILT TO LAST A LIFETIME! PLEASE CALL 800-544-3746 FOR FREE LIVE HELP OR TECHNICAL QUESTIONS, AND VISIT OUR EBAY STORE TO SEE OUR VARIACS AND POWER REGULATORS RATED FROM 500-100,000 WATTS! IMPORTANT INFORMATION: WE OPERATE A FACILITY THAT EXPERTLY REBUILDS THESE VARIAC TYPE AUTOFORMERS. EACH VARIAC IS COMPLETELY DISASSEMBLED. INSPECTED, AND ANY WORN OR DAMAGED PARTS ARE REPLACED, THE ENTIRE UNIT IS CLEANED, AND IF NEEDED, PROFESSIONALLY RE-PAINTED! FOR CONVENIENCE AND SAFETY WE ALWAYS INSTALL A NEW. PROPERLY RATED, THREE PRONG POWER CORD AND THREE PRONG GROUNDED OUTLET RECEPTACLE IF THE VARIAC WAS NOT ORIGINALLY SUPPLIED WITH ONE! AFTER CAREFUL RE-A
GE Druck UPS-III Loop Calibrator R6673 Used
This GE Druck UPS-III Loop Calibrator is used working surplus. Includes manual and probe connectors. The physical condition is great. But there are some minor scratches from previous use and handling. Part No: GE Druck Model No: UPS III Serial No: R6673 Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 10"x10"x10" 4 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See ... moreDetails Below) Lister 13 Can't find the answer you're looking for? contact us! Business Hours: 8am to 5pm MST Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30am to 4pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505.345.8732, Fax: 505.345.8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 7% Sales tax applies to NEW MEXICO residents(or provide a resale tax ID for our records. A 8.8% Sales tax applies to ARIZONA residents(or provide a resale tax ID for our records. We cannot process the order until we receive the NM or AZ sales tax or a copy of your tax ID. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the packing requirements.
VTG BROCHURE Rockwell 1964 Temcorector temperature calibration calibrator gauge
Be sure to add me to your favorites list! ITEM INFO: Brochure name/Brand: Rockwell Manufacturing Company. Instruction Manual Emcorector Temcorector. Year/Date: Copyright 1964 Pages: 31 Features: Emcorector Type I T W. Emcorectore Temcorector Type T W Charts, What is, Theory of Operation, Boyle's Law, Suggested Calibration Hook-up, Calibration, Interpolator wheel, Installation, Field Testing. Approx Size folded: 5 1/2" including white piece) x 6 1/2" Condition: This brochure is Vintage: it has been USED. Has tears on the edges of the pages. Corners are bent and upturned, and brochure has scuffs and scratches. Covers show wear. Brochure shows shelfwear, discoloration, spots, yellowing, crease wear/tears in the creases from use, and natural wear for it's age. Kept in Storage, staples have rust and may have discolored the paper, ... morecatalog may have writing, and the store logo/advertisement stamp on it. Pages show shelfwear, ink rubbing against the other pages. USED. Sold As Is. Item has been kept in storage. Shows natural wear for age, please see pictures for condition. Thanks for looking! Good luck and Happy Bidding! Please Check out my! We have other unique trinkets available. Please note before you bid: The items I sell are Vintage. They are used and have been kept in storage. I try to describe any flaws I find. Occasionally I miss something. Even if item is new with tags. It can have flaws from being stored for a long period of time. Since these items have been previously owned, I cannot guarantee that the previous owner did not smoke or have pets. If not stated that item has been laundered, I generally air them out for a few days. Auction Terms& Conditions: Payment: We accept Paypal only. Credit cards and echecks through PayPal Only. Please allow 10 business days for echecks to clear. Payment must be received within 7 days end of auction. We usually ship 4 business days from a cleared payment. If payment is not received in 7 days after auction close. We will cancel the sale through eBay. All S
pressure calibrator, Beta/martel T-140 30PSI, 200"H20
Excellent condition with protective peel plastic still over LCD scree. 0 to 30 psi or 0-200"H20 with case.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13ecb086b6e-0x102-
Datron 4200 Autocal AC Standard Calibrator
Datron Autocal AC Standard Calibrator Model: 4200 This unit is for parts. Contact Justin at 503.464.6013 with any questions. The unit is located in Portland. OR. WORLDWIDE FREIGHT SHIPPING AND PACKAGING COSTS TO BE DETERMINED BY DESTINATION. Please read the terms and conditions below so that you understand how all our items are sold. Payment Options: ALL PAYMENTS ARE EXPECTED WITHIN 48 HOURS OF AUCTION CLOSE. WE UNDERSTAND THAT THERE ARE EXCEPTIONS. BUT COMMUNICATION IS KEY. PLEASE DO NOT BID IF YOU CANNOT PAY FOR THIS ITEM IN A TIMELY MANNER. Shipping Options: Smaller Items: Minimum shipping charge of $15.00. Items over $500. Must be insured at the buyers expense of $0.50, per $100. Freight Items: The buyer is responsible for coordinating shipment and is responsible for all freight and rigging(if required) costs. We can arrange freight shipments. ... moreYou will be billed exactly as quoted by my freight forward. With no mark-up, however at times this may be more than the cost of the actual item. Please ask for a quote prior to bidding, so there are no surprises. Freight items typically require payment by bank wire transfer or certified funds, since shipments and delivery confirmations typically do not conform with Paypal requirements. Local Pick-Ups: This option is available on many auctions. However we are not always on-site where the item is located. Please inquire before bidding. Typically there will be no additional charge for a local pick-up. However some larger items may require an additional rigging fee upon pick-up. Terms and Conditions: Most items that we sell are from plant closures and business liquidations. We typically wholesale directly from the facility closure. This means the items are still or have very recently been in production and under power. We strive to only sell quality items and do the best job possible in describing the items accurately. All items are sold as-pictured. Where-is. Please ask your questions before you bid.
Quest Electronics 211A Sound Level Meter wtih Permissible Calibrator CA-12, Case
quest_electronics_211a_sound_level_meter_w_permissible_calibrator_case Quest Electronics Sound Level Meter model 211A/FS. 70, 80, 90, 100, 110 dBA Range. Ansi S1.4 Type S2A Quest Electronics Permissible Sound Calibrator model CA-12. 110 dB-1000 Hz, Approval 2G-2728 2x 9V Batteries not included NO RESERVE! BUY IT NOW Ask our Sales Personnel for details. Item ID: 345684, Manufacturer: Quest Electronics, Model Number: 211A, Description: Sound Level Meter w/Permissible Calibrator& Case, Made in: United States, Weight: 3Lbs, Condition: Tested, Cosmetic: Excellent, 9 Volts Have questions regarding this product? Contact us: ebay@megawavz.com Bidders with less than a( 5) rating must contact us prior to bidding otherwise their bids will be removed. Payment must be received no later than 7 working days from the closing date of the auction. Unless ... morediscussed with the billing party. In the case that payment has not been received within 7 working days. Groupe Interconnexion reserves the right to open an unpaid auction request.Unless otherwise notified) All Items are subject to a Packing and Handling Fee of 3% 15$ Minimum) Canadian residents should expect Provincial/Federal taxes to be applied. IMPORTANT: Read our shipping instructions allocated to your region; Canada. USA or International. Alternative buyer's shipping account are also welcome CANADA: A Minimum Shipping Charge of $20.00usd will be applied to all auctions. Higher rates will apply in northern Canada) Upon demand. We'll be happy to provide you a shipping quote. Please state destination city& postal code. If you disagree with our shipping terms. We are open to using your shipping account. If the dimensional weight(calculated using the final dimensions of the packed purchase) exceeds that of the actual item weight. The shipping cost will be calculated based on the dimensional weight. Sorry. We will not ship post mail. USA: A Minimum shipping charge of $25.00usd will be applied to all auctions. Upon dem
Simpson Sound Level Meter Model# 884-2 W/ 890-2 Calibrator P/N 6-115409 W/ Case
Simpson Sound Level Meter Model# 8 84-2 P/N 6-115409 Comes with 890-2 Sound Calibrator Measure specific frequency ranges. Useful for isolating noise source General purpose. Type 2 meters for OSHA and laboratory sound measurements Full coverage from 40-140dB with special 85-115dB OSHA range"A" B" and"C" weighted measurement options Rugged solid-state reliability. Battery-operated Impact-resistant case contoured to minimize sound energy field reflections Subject to prior sale! Photos show everything that is included. For more information. Or to contact us, please feel free to visit our ME page. 14 day Right of Return if not satisfied. Thanks for looking! Please visit our store for more great items! 7524- 3MZ-RR11D
CS Instruments 2036 Acoustic Calibrator Set with Case
CS Instruments 2036 Acoustic Calibrator Set Manufacturer Part Number: CS 2036 This auction is for a used CS Instruments 2036 Acoustic Calibrator Set. This unit is used in good working condition. SERIAL# 30 MADE IN ITALY WTPC-SAP3515 94 dbSPL SPRINGS KIT FOR HANDSET RETAINING ARM = AC-2SPNG O-RING FOR EAR CAVITY(10 PCS) AC-3 OR EVERYTHING IN THE PICTURES IS INCLUDED IN THE SALE. Buyer must inspect the item within 3 days of receiving the item. Guaranteed to arrive in GOOD working condition. We are selling HARDWARE ONLY. Any software. Password, configuration issues are the BUYER's responsibility and are not covered by"NO DOA" warranty. Pictures are of the actual item. Thank you for looking at my items and good luck bidding. If you are not sure of something contact me before bidding. Please feel free to check out my other listings! ... moreThank you for looking. inkfrog terapeak. I000000. InkFrog Analytics.
Simpson 886 Sound Level Meter and Simpson 890 Sound Level Calibrator with Case
You are looking at a Simpson 886 Sound Level Meter& Simpson 890 Sound Level Calibrator S impson Model 886 Soun d Level Meter Type 2 Battery Powered Approximate measurements: 1 0 1/4" x 3" x 1 3/4" Simp son Model 890 Sou nd Level Calibrator Acoustical Sound Calibrator Freq. 1KHz Level- 144 dB Approximate measurements: 5 1/2" Includes 12 1/2" x 9" x 4 1/ 2" Case and Original Warranty Paper Work USED with some very minor blemishes*This lot is part of a HUGE ESTATE SALE* We were told that all of these items are all in working condition. If for some reason. This unit does not work. We are offering a money back guarantee! We are not electronics experts but please. Feel free to contact us with any questions. Please see pics Buyer is responsible fo r calculated shipping rates thru FedE x or Local Pick-up from ... moreou r store in Staunton. Virginia. Take advantage of the SUPER LOW opening bid with NO RESERVE! MUST SEE PHOTOS ~~ THANK YOU FOR LOOKING ~~ Enjoy a LOW opening bid with NO RESERVE! Bid with confidence at EZ Auction. Now in our 1 4 th year of operation! With More Than 30 Years of Staff Research and Listing Experience. Shipping: Buyer is responsible for $19.45 shipping rates thru Fed Ex Ground. Includes insurance. Questions: Please feel free to ask any and all questions in regards to this item. Sales Tax: All EZ Auction eBay auction items(except cars. Trucks, boats or motorcycles) picked up in Virginia or purchased by Virginia residents are subject to 5% state sales tax. NO EXCEPTIONS! Payment: We accept most all major credit cards. Purchaser must make Payment or contact with EZ Auction within 48 hours from Auction end date. Agreement: We participate in eBay Unpaid Item Program. By placing a bid on this item you are entering into a legal and binding contract to purchase the above-described item. We reserve the right to cancel any and all existing bids. Contact with EZ Auction and/ or Payment is expected within 24 hours of auction ending. Please do not bid if you do not plan on pay
GENERAL RADIO 1562-A PERMISSIBLE SOUND LEVEL CALIBRATOR IN BOX CLEAN
THIS IS A NICE GENERAL RADIO 1562-A SOUND LEVEL CALIBRATOR LOOKS IN GOOD CONDITION# Shipping on this item is 18.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within ... more48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item1.
CEL-440 Sound Level Meter and CEL-282 Calibrator
CEL-440 Sound level meter and CEL-282 Calibrator. Meter does not include pre-amp or mic. Meter appears in good shape. Powers up and passes built in start up test. Calibrator produces sound with batteries. Meter takes four normal AA and calibrator takes normal 9 volt, not included.Battery compartments are clean. Sold as is without returns, please ask any questions.
Quest 211FS Permissible Decibal Sound Level Meter & CA-12 Calibrator w/Case
Item Description Quest 211FS Permissible Decibal Sound Level Meter& CA-12 Calibrator w/Case Item Condition.Used and in good condition. 149 It powers on and works&149 The calibrator also works&149 Has some light scratches and engraving from the previous owner 13010319.s724. Combined Shipping We are happy to combine shipping whenever possible. Just contact us and let us know what items and quantities you are interested in. For customer service please feel free to contact us Business Name Wall to Wall Sales. Inc Contact Name Andy Wall Phone Number(501)499-9255 Location Hot Springs. AR 71901 Freight Shipping Info Commercial Location with Loading Dock QUESTIONS If you have questions about this item. Please scroll to the bottom of the page and click the" Ask a question" link. You can also use this to contact us. But you must ... morereference the Item Number and Auction Title in your message or we won't know what item the email is about. Shipping Address: We use Fedex Ground to ship our items and therefore we need a street address to send the item. Please make sure the checkout does not contain a PO Box. Also. We reserve the right to require shipment to a confirmed shipping address, especially when the buyer is new to Ebay or Paypal, and also on high value transactions. This means that if you send a payment with an unconfirmed address, we may return it to you and ask for a confirmed address. Shipping Outside of the 48 States: The shipping price quoted in the auction is for the 48 Contiguous States and includes insurance. On some items we may ship to Puerto Rico. Alaska and Hawaii, but bidders must contact us before bidding for approval Freight Shipping Prices: Some items are to large to ship using Fedex Ground. These will need to be picked up by the buyer or shipped with a freight carrier. Local pickup in Hot Springs. Arkansas is always free. If you are unable to pick it up here and need freight shipping, please email me with the following information and I will get a quote for you: What is your zip c
Genrad Type 1 Sound Level Meter/Octive Filter/ Model 1933 with 1562 Calibrator
Genrad 1933 Type 1 Sound Level Meter with 5 frequency calibrator. This is a working unit with working 1562 Calibrator. I have a manual for the Calibrator and for the sound level meter.The 1/2 inch Microphone on this unit is flat out to 19K HZ. A great unit for noise studies were a digital reading is needed.I will include a one inch mic and 10 ft extension cable if buy it now is used to purchase.Continental USA shipping only but I will make exception for Canada but you will have to get a shipping quote.Kit also includes a 1 inch Microphone.
GENRAD SOUND LEVEL METER 1982 W/1562 CALIBRATOR LOOK FREE
WHAT YOU SEE IS WHAT YOU GET. NOTHING MORE AND NOTHING LESS. PLEASE READ THE ENTIRE AD BEFORE BIDDING ON OUR ITEMS. IF YOU ARE AN INTERNATIONAL BIDDER. PLEASE CONTACT US FOR A SHIPPING QUOTE, BEFORE BIDDING. FREE SHIPPING ONLY APPLIES TO CUSTOMERS THAT LIVE IN THE CONTINENTAL UNITED STATES. IF YOU DO NOT SEE THE BUY IT NOW BUTTON. THAT MEANS THERE ARE ALREADY BIDS PLACED ON THE UNIT AND THE BUY IT NOW IS NO LONGER AVAILABLE. IF YOU HAVE ANY QUESTIONS REGARDING THIS UNIT OR ANY ITEM I HAVE FOR SALE. PLEASE CALL ME TOLL FREE AT 1-888-300-8838. THANKS.JIM HERE IS A GENRAD SOUND LEVEL METER MODEL 1982. IT COMES WITH A 1562 CALIBRATOR. IT IS A 1982 PRECISION SOUND LEVEL METER AND ANALYZER GENRAD. I DO NOT HAVE THE CHARGER FOR IT. SO I HAVE NO WAY OF TESTING IT. I NOTICED THE TOP OF THE UNIT, THE HEAD COMES OFF REALLY EASY. IT COMES WITH ONE LITTLE ... moreCABLE. IT COMES WITH SOME KIND OF ADAPTER AND ALSO COMES WITH A GENRAD TYPE 1562-A SOUND LEVEL CALIBRATOR FOR GENRAD RADIO. I AM SSELLING THIS UNIT AS IS FOR PARTS OR REPAIR. IT COMES WITH A CARRYING CASE. IF YOU USE THE BUY IT NOW OPTION. SHIPPING VIA UPS GROUND IN THE CONTINENTAL UNITED STATES IS FREE. SHIPPING COST VIA UPS GROUND IN THE CONTINENTAL UNITED STATES IS $27.50. THANKS.JIM* 18 5A1 23456 By placing a bid on our merchandise. You are agreeing to the terms listed below. IF YOU USE THE BUY IT NOW. BEFORE PAYING, PLEASE WAIT FOR US TO SEND YOU AN INVOICE WITH THE SHIPPING DEDUCTED. OTHERWISE PAYPAL WILL TRY AND CHARGE YOU FOR THE SHIPPING. IF YOU HAVE ANY QUESTIONS, CALL US TOLL FREE AT 888-300-8838. TRACKING INFORMATION IS AVAILABLE BY REQUEST 2 BUSINESS DAYS AFTER PAYMENT HAS BEEN MADE. Payments: With Paypal. We ship to your confirmed address Only. We will not accept payments from anyone other than the person that has won the auction. If you do not have a confirmed address with paypal, we will not accept your payment and your payment through paypal will be returned to you. We do not accept P.O. Boxes with Paypal. We accept credit cards over
Simpson Sound Level Meter 884-2 and Calibrator 890-2 Kit with case
This is a gently used Simpson Sound Level Meter Model 884-2 and Sound Level Calibrator Model 890-2. Both units work great. This kit comes with the plastic case and all instruction manuals as shown in the pictures. Any questions please email. Buyer to pay shipping charges of $12.00. I accept PAYPAL. Thanks for looking.
CRYSTAL ENGINEERING IS-33 DIGITAL PRESSURE CALIBRATOR~ IS33 ~ FREE SHIPPING
CRYSTAL ENGINEERING IS-33 DIGITAL PRESSURE CALIBRATOR~ IS33 ~ FREE SHIPPING FREE SHIPPING lower 48! Previously used. Great condition. This pressure calibrator has been tested and it does work. No cosmetic damage or defects. No scratches or cracks. Includes Pressure calibrator and black protective case. The photos in this listing are of the actual item(s) being sold. This auction includes all and only the item(s) pictured. Please take a look at all of the photos for complete details and condition of item(s) Thank you for your interest and Good Luck bidding! Payment Our preferred method of payment is PayPal. Payment is expected to be paid in full within(7) days of auction's end. After(7) days of non-payment. EBay will be notified of non-payment and the item will be relisted or sold to second highest bidder. Other methods of payment may ... morebe accepted if authorized by Casual Consignments prior to auction's end. To request another method of payment, please try contacting us before placing a bid on an item. Shipping We typically use The United States Postal Service(USPS) as our default carrier on most packages. But in efforts to save time and/or money, we occasionally provide multiple options to choose from. Please allow(3) to(7) days after payment is received for order processing and shipping to be completed. Arrangements to use a carrier or service that is not listed must first be authorized by Casual Consignments before the end of auction. Ebay's shipping cost calculator only provides estimated shipping costs. It's the buyer's responsibility to ensure adequate shipping& handling fees are included with item payment to avoid any delays. Casual Consignments reserves the right to make the final desicsion on which carrier and/or service is used. We will cobine shipping for multiple items, but please ask us to revise charges before paying. This item will only be shipped in the United States. Contact Us eBay User Name: casualconsignments Please use eBay messaging for all questions& concerns regard
Mehaffey Beat Simulator / Calibrator Pulse Rate from 0.4 - 31.3 Beats Per Second
NOT E: I am out of town until Saturday Buy It Now auction for a Mehaffey Beat Simulator in good condition. Pulse rate(beep) adjustable from 0.4- 31.3 Beats Per Second. Payment for this auction is by PayPal for credit cards and bank transfers. Immediate payment required. Contact me for other payment options. Shipping is $5.65 in the U.S by Priority Mail. Insured, with Delivery Confirmation/ Tracking(fast! I’ll pack it up for free. You will receive an e-mail with the tracking info when it is shipped. Shipping is the actual amount of postage; I don't try to make any profit on shipping or"handling" fees. No hidden charges. I usually ship immediately upon receiving payment. So this can be in your hands very quickly. To end the auction immediately at $12.50, just click on the“Buy It Now’ icon at the top of the page. California residents ... moreadd 7.50% sales tax. International winners are responsible for any taxes or Customs duties charged by your country. The full value will be declared for insurance purposes. One of the external case screws have been sealed with a special ink to prevent tampering. The 3-day return guarantee is VOID if this unit has been opened. Guaranteed to arrive as described. But is otherwise being Sold AS IS, NO RETURNS.
DRUCK PRESSURE CALIBRATOR DPI 605
DRUCK PRESSURE CALIBRATOR DPI 605#53861 Payment All payments must be received by Industrial Asset Recycling within 7 days. SHIPPING CHARGES WILL BE AMENDED ON INVOICE IF NEED BE. WE WILL DO WHATEVER IT TAKES TO KEEP SHIPPING CHARGES LOW AND FAIR. About Us At Industrial Asset Recycling LLC we still believe in a personal relationship with our clients and attuning all our resources to their best advantage and needs. Regardless of your business we have an expert to fit your specialized need. Collectively. We have experience in all business areas of Asset Management, Recycling and Environmental Remediation to service your ever changing business needs. SEE OUR STORE FOR MORE GREAT DEALS Item sold"As Is"
PIE Practical Instrument Electronics 525 T/C-RTD Calibrator H14 (1081)
PIE Practi cal Instrument Electronics T/C-RTD Calibrator Model: 525 Used Surplus. Excess Inventory Listing Includes Only What is Shown in Pictures See Pictures for Information! No Way to Test Items Money Back if DOA Will Combine Ship! Bitter End Trading is an asset recovery wholesaler specializing in new and used surplus industrial equipment. Bitter End Trading is not a representative of any manufacturer listed; all names. Logos, descriptions and other related information are trademarks of their respected companies or manufacturers. All items listed are identified as either new or used and the new may be older surplus. We list all items to the best of our ability and aim to provide the customer with as much information as possible. Bitter End Trading is not liable for any products sold. The customer is responsible for proper testing, installation ... moreand use of equipment purchased. No warranties are expressed or implied. Combined Shipping Policy We will combine shipments to reduce costs for customers purchasing multiple items. After customers have completed their mulitple purchases they should request an invoice. We will package and weigh the entire purchase and provide an invoice. Including shipping and handling. Shipping rates are generated using the EBAY shipping calculator. Handling charges per shipment are determined by size of the item. As well as additional packing requirements on delicate instruments. See individual item for cost. Domestic Shipping. We ship using UPS and FedEx to provide en-route package tracking. International Shipping We ship using UPS. FedEx and USPS. Items shipped by UPS and FedEx are more efficient and provide customers with en-route tracking. Items shipped by USPS cannot be tracked. International buyers are responsible for any and all applicable customs. Duties, taxes and fees. Freight Shipping We have very competitive rates for shipping freight. All items are palletized and shrink wrapped before they leave the warehouse. If shipping to residential address. There is an additional fee
DASIBI MODEL 5008 PROGRAMMABLE MULTI-GAS CALIBRATOR
DASIBI MODEL 5008 PROGRAMMABLE MULTI-GAS CALIBRATOR Description: Thank you for your interest! We are auctioning off this DASIBI MODEL 5008 PROGRAMMABLE MULTI-GAS CALIBRATOR. Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. COMES AS SHOWN! Powers up. Cosmetic wear. Nothing comes on the display. USA CUSTOMERS- NO MEANS TO TEST. May have other unknown issues. Sold as is for parts or repair! INTERNATIONAL CUSTOMERS- NO MEANS TO TEST. SOLD AS IS WITH NO GUARANTEES. 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding ... moreproducts and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6. It is the bidder's responsibility to understand that the terms of the auction. The nature of equipment offered and bid accordingly. Shipping: BUYER TO PAY SHIPPING IN THE US. Alaska& Hawaii will be more! INTERNATIONAL BIDDERS WELCOMED-PLEASE CONTACT US FOR ACCURATE SHIPPING CHARGES. Payment: Gladly accept most forms of payment including paypal. Click to Enlarge click to Enlarge click to Enlarge inkfrog terapeak. I000000. InkFrog Analytics.
Capintec CRC-7BT Dose Calibrator w/ Ion chamber RADIATION DETECTOR
1-888-9WEC2IT(993-2248) Problem? Capintec CRC-7BT Dose Calibrator w/ Ion chamber RADIATION DETECTOR. Item Description. Item was pulled from a working environment. Item was powered on. And did not give any errors. Good Cosmetic condition with a few scratches/scuffs from normal use. Includes ION Chamber. RJF103. The sale of this item may be subject to strict regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By
M-27 Noise Dosimeter & QC-10 Sound Level Calibrator Kit by Quest Electronics
M-27 Noise Dosimeter& QC-10 Sound Level Calibrator Kit by Quest Electronics Kit is Complete with: Calibrator. Which sends a steady toneand has adapter for direct microphone connection Dosimeter which registers sound fluctuation. And should be re-calibrated for your specific atmospheric conditions Dosimeter also has steel armiture Microphone 059-847 Data Cable for printing 2 Fresh 9V Batteries Operation Manuals for the M-27 and QC-10 along with certificates of production and original factory calibration in 1993 Nice hard case with great foam padding for protection Nice condition. It has been tested for general function and it works. But must be re-calibrated at your location. Technical Specifications for the M-27 Dosimeter are as follows: PDF Manual Available at: The M-27 internal switches select: Exchange rates of 3. 4, 5, or 6 dB. Criterion ... morelevels of 80. 84, 85, or 90 dB. 2 thresholds of none. 70, 75, 80, 85, or 90 dB. 2 ranges of 35-126 or 50-146 dB. A" or"C" frequency weighting. Fast or slow time constant. Upper limits of 90. 115, or 140 dB. 12 or 24 hour clocks. 8 different unit numbers. Text. Graph, or both printouts. Serial or parallel printers. Baud rates of 300. 600, 1200, or 2400. Line feed. Carriage return, or both. Technical Specifications for the QC-10 Calibrator are as follows: PDF Manual Available at: Single Frequency generates 1000 Hz at 114 dB SPL. See photos for detail and feel free to write with any questions.
QUEST ELECTRONICS 215 SOUND LEVEL METER w/ OCTAVE BAND FILTER & SOUND CALIBRATOR
QUEST ELECTRONICS 215 SOUND LEVEL METER w/ OCTAVE BAND FILTER& SOUND CALIBRATOR Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge ANOTHER GREAT ESTATE SALE FIND. THIS IS A QUEST ELECTRONICS 215 SOUND LEVEL METER THAT INCLUDES QB-45 OCTAVE BAND FILTER AND CA-12 SOUND CALIBRATOR. THEY COME AS SHOWN DOES SHOW SOME LIGHT WEAR FROM USE. WHEN TURNED ON THE METER HAND DOES MOVE TO SOUND. TURNED ON CALIBRATOR AND IT DOES MAKE A HIGH PITCH SOUND. OTHER THAN THAT IT IS BEING SOLD UNTESTED AS IS. WE SHIP FAST! SHIPPING WILL BE 11.00 TO THE LOWER 48 STATES OTHER AREAS PLEASE ASK US FOR A RATE. WE ARE VERY FAIR AND HONEST SELLERS PLEASE CONTACT US IF THERE IS A PROBLEM AND WE WILL WORK WITH YOU TO RESOLVE ANY DIFFERENCES. A FEW PEOPLE HAVE LEFT NEGATIVE ... moreFEEDBACK AND DO NOT CONTACT US. AND THAT IS NOT GOOD FOR EITHER PARTY BUT MUST BE A POWER TRIP FOR THOSE INDIVIDUALS. MOST OF OUR ITEMS COME FROM ESTATE SALES AND ARE USED UNLESS NOTED DIFFERENT. WE ARE NOT EXPERTS BY ANY MEANS BUT TRY OUR BEST TO DESCRIBE OUR ITEMS FAIR AND ACCURATE AND IF WE MISS SOMETHING WE WILL BE FAIR WITH THE BUYER. WE ACCEPT PAYPAL ONLY. PAYMENT MUST BE MADE IMMEDIATELY. WITHIN 3 DAYS MAX. This is our policy. If it is not followed we will re-list it and report you to Ebay as a non paying buyer. If there’s a problem. Let us know so we can work with you. Don’t leave us in the dark. WE GLADLY COMBINE SHIPPING WHEN POSSIBLE. ANY ITEM SOLD AS PICK UP ONLY MUST BE PAID FOR WITHIN 3 DAYS AND PICKED UP WITH IN 30 DAYS OF PURCHASE. ANY ITEM NOT PICKED UP AFTER THE 30 TH DAY WILL BE THROWN OUT OR RE LISTED AND NO REFUND ISSUED. NO EXCEPTIONS! DO NOT DUPLICATE OR COPY! Template Made By: © Inkfrog Template Center Auction Templates. Logos, Store fronts and more! inkfrog terapeak. I000000.
Bruel & Kjaer Type 4230 Sound Level Calibrator
Bruel& Kjaer Type 4230 Sound Level Calibrator This is Bruel& Kjaer Type 4230 Sound Level Calibrator 94Db 1000Hz. Unit is tested and confirmed to be functional. There is a calibration date of: Aug 2009, unit comes with leather case only, no other part or accessory. Please make sure this item is compatible with your equipment before bidding. Email or call at 514-844-1441 if you have any questions. Inspection and after auction pick up is welcomed at our location at: CineMonde Canada. 113 Ave Du Mont-Mont Royal West. Montreal. Quebec, H2T2S9 Canada. We ship to: Canada. USA and Worldwide. Make sure what you're buying is compatible with your equipments before placing your bid. No return no exchange for items not being compatible. Email or call at 514-844-1441 if you have any questions. Inspection and after auction pick up is welcomed. ... moreShipping cost to USA: $ 18.00. Shipping cost to Canada: $18.00. Canadian buyers pay appropriate sale taxes( Quebec GST + QST/ other provinces GST only) Please do not pay until you receive an invoice. Shipping worldwide; contact us for international shipping cost. We don't mark the items under value or gift for shipping. Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We print shipping labels out through PayPal. Please make sure your shipping address with PayPal and eBay are correct, We are happy to combine items for shipping at cost. Please provide your phone number for shipping when making payment. All international buyers: Must provide valid phone# for Declaration/Custom form. Are responsible for Custom fee which is not included in this listing price. No items will be mark under value or as a“Gift” Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your
SONY ARTISAN GDM USB Calibrator - Free Shipping
We have a leftover calibrator for the SONY ARTISAN GDM-C520K 21" FD COLOR REFERENCE MONITOR. On our last test. The product works fine. Free First Class USPS shipping. Priority Shipping extra. No International Shipping. This is only for item picture. Not for a monitor or any software. Please contact me with any questions. Returns only accepted if the product does not work, not if it isn't compatible. Please contact me questions if you are uncertain.
Zellweger/Sieger 2414-0017 3W Digi-Cat Non-Intrusive Transmitter Calibrator
Search our eBay Store! Zellweger/Sieger 2414-0017 3W Digi-Cat Non-Intrusive Transmitter Calibrator SKU: JV-DAN-A-ZELLSIEG1165BA Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Zellweger Analytics/Sieger 2414-0017 3W Digi-Cat Non-Intrusive Transmitter/Calibrator. P/N: 2414-001 Rev. 7. 32V DC/Max. 3 Watts. For Use In Class 1. Division 1. Physical Condition: Unit is in good condition. Cosmetic scuffs/scratches. Paint has chipped off some of the valve fittings. Internal components are in good condition. Digital display is in good condition. Valve threads are in good condition. Wires have been severed. ... moreFunctionality/Degree of Testing: We do not have the necessary resources to test this unit. Power cable adapter is not included. Dimensions(L" x W" x H" 5 ¼ x 7 ½ x 5 ½. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the descripti
Agilent HP 11613B Scalar Analyzer Calibrator for 8756A, 8757x Tested
HP 11613B Scalar Analyzer Calibrator for 8756A. 8757x Tested Here is a link to a windows base software to use with this. 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13ed00bc737-0xfe-
Fluke 5100B Calibrator W/ opt. 3 and 5 and Y5000 Interface READ
Fluke 5100B Calibrator W/ opt. 3 and 5 Y5000 Interface/Buffer Error 6 on power up. No Output Sold As-Is. No Returns;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ed00bc783-0x104-
Liquidonics pressure calibrator pump calibration gauges
This is a Liquidonics pressure calibration kit with 4 gauges. 300, 600,1000, and 3000 PSI. There is a adapter missing for the gauges, see the O-ring fitting on the gauges in the pictures.
Fluke 5200A Programmable AC Calibrator s/n 2925004
Fluke 5200A Programmable AC Calibrator Last Calibrated in 2012 No Physical Damage Item Powers Up. This item is being sold as-is. As-pictured with the assumption and understanding that there may be unknown defects.
Oxford XC-90III Calibrator & Oxford Writer Connector / Medilog
Oxford XC-90III Calibrator& Oxford Writer Connector/ Medilog These items have NOT been tested. Therefore selling"AS IS" for parts or repair. They have minor cosmetic wear. It is the sold responsibility of the purchaser to have these items and their parts served and in good working order before placing in a work environment. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. IMPORTANT INFORMATION What is included Only what is pictured and listed above. Please ask if you have any questions before bidding. What is not included Power cables or ... morepower adaptors or other accessories are NOT included unless pictured. Auction Cancelation notice This auction may be canceled before end of auction because of local sale. However we will not cancel the auction before the end for online buyers. You may make offers base on it not selling though and we will consider relisting it for that price in a private auction for you. Payment Options PayPal Only Non-payments Bidders that do not pay in a timely matter will be automatically reported to E-bay after 4 days. Please do not bid or make offers if you do not plan on honoring them. Shipping Most orders placed before 2pm(CST) ship same day. Orders placed after 2pm(CST) ship next business day. Please note we are closed on weekends and most holidays Customer Service& Return Policy All Items are pulled from a working environment. And fully tested if possible. Returns are not accepted at this time. Please contact us with any questions. Issues, or concerns! Please contact us with any issues before leaving feedback we want you to be a happy customer About Ewasteinternatioal We are a Electronic recycling center in Springfield MO We try our best to reuse. Repurpose then recycle at the end the
Fluke 713 30G Pressure Calibrator w. Altek Pressure Pump (145 PSI/10 Bar) & Case
Fluke 713 30G Pressure Calibrator with Altek Pressure Pump(145 PSI/10 Bar) Case Good working condition. Review: Measure pressure. 0.05% of full scale Measure mA. 0.025% Calibrate I/P transmitter with simultaneous pressure and current measurement Select eleven different engineering units Compatible with non-corrosive gases and liquids Zero. Min, max, hold functions 1/8 NPT female pressure fitting Two shrouded banana jacks 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13ed00bc785-0xf9-
DIAL INDICATOR CALIBRATOR ITALL CORP TMDE
Auction Wizard 2000 Listing Template- AW2KLOT#2366 DIAL INDICATOR CALIBRATOR MODEL 700 ITALL CORP TMDE What you see is what you get Sold as is Your bid is a contract. Bidders must place a bid only if serious about making the purchase and agreed with all terms and conditions. If any calibration is required. It is buyer's responsibility and the condition of any batteries are unknown unless stated in the auction. Payment Terms& Return Policy Paypal: Paypal is our preferred method of payment. This is the fastest and most efficient way for us to process your order. Tax: All Florida customers are subject to Florida State Sales Tax of 7.0% Please note that if payment is not made within 5 days. We do reserve the right to submit a Non-Paying Bidder form to eBay. Return Policy: Items not Sold As Is are returnable within 3 days from date of ... morereceipt. Items must be returned in the same condition as sold, please contact us first for RMA number. Any shipping fees are non refundable. Do not return any item without RMA number, we will refuse the package. For items Sold As Is all sales are final and non refundable. Email with any questions prior to bidding 3 day Warranty: Item guaranteed to be operational for 3 days from receipt. Should the item fail to be operational. It may be sent back at the expense of the buyer to be tested by our staff. Refund issued at our discretion based on those tests. Shipping costs cannot be refunded. Return policy and/or warranty apply only to buyers within the United States. The removal or damage to calibration or warranty seals. Will void any warranty or return privileges. We're only happy when you're happy. If for some reason you are not comfortable giving us a 5-star rating please contact us by using the"Ask seller a question" link and let us know what we can do to help. Shipping Terms- USA Every item will be send to Paypal address only; it is buyers responsibility to correct all problems with shipping address. Shipping cost include Insurance. Shipping and packing charges
VERY NICE WAHL HEAT PROBE CALIBRATOR PLATINUM 392M MODEL 10786
SquareTrade © AP6.0 Prev Stop Play Next Description You are bidding on a VERY NICE WAHL HEAT PROBE CALIBRATOR PLATINUM 392M MODEL 10786 This is a very nice unit in excellent condition and it is fully guaranteed. Very competitive Shipping rates for our always welcomed International bidders Shipping and handling is $7.90 within the Continental USA. ao5pta.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bisk%3Eao5pta-13ed00bc74e-0xfd-
ALTEK MILLIAMP LOOP CALIBRATOR MODEL 334
Good used very little loop calibrator
Collins Deviation Calibrator
This Collins type 477Z1 calibrator is complete and works. It uses four tube(5654. 2) 5725 and 5670) One door has comes off, but otherwise is in good condition.
NICE PORTABLE PRECISION PNEUMATIC CALIBRATOR SERIES FA-235
NICE PORTABLE PRECISION PNEUMATIC CALIBRATOR SERIES FA-235 You are Bidding on a VERY NICE PRECISION PNEUMATIC CALIBRATOR SERIES FA-235. This is a very nice unit in excellent condition and it is fully guaranteed. Very competitive Shipping rates for our always welcomed International bidders Shipping and handling is $39.90 within the Continental USA. We always combine shipping to give you the lowest cost. Contact us with any questions at 1-800-826-3433(9-5pm Est) Please visit our other listings on eBay! Powered by
Tegam 840A Digital TC Calibrator/Thermomoter Kit w/Schlumberger Gallus 2000
Questions? Call us: 1-877-328-9236. Tegam 840A Digital TC Calibrator/Thermomoter Kit w/Schlumberger Gallus 2000. Manufacturer: Tegam Model: 840A Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Tegam Condition: Used. Comes in non-original custom packaging. This set is in good condition with a few scuffs and scratches from normal use. But nothing major or anything that would affect function. Notes: This kit was pulled from a working environment. But the parts included were not tested separately. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Tegam 840A Calibrator/Thermometer, 1) Sclumberger Gallus 2000 Gas Meter, 1) Hard Black Protective Carrying Case, Additional accessories/manuals(as pictured) Specifications: Manufacturer: Tegam/Schlumberger, Model: ... more840A, Description: Thermocouple Calibrator/Thermometer Kit, Gas Meter: Schlumberger Gallus 2000, Total Weight: 9.75 lbs. Condition: Used, Quantity: 1 Set, SKU: N15P015 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may o
HP 8402B Calibrator For Use With 431 Power Meters TESTED
Here is a HP 8402B Calibrator. It has been thoroughly tested by our engineer and is guaranteed to be in fine working order and good cosmetic condition with minor signs of use. As shown in the photos. Only the 8402B. Line/power cord are included in this auction. No thermistor mount or any other cables or devices. See our ebay store for more great deals. Many loads. Attenuators, cables, manuals and other equipment available. Click here to Be sure to sign up for our Ebay Newsletter under the'Email Subscriptions' heading for special ebay-only offers. Questions/ Contact We are available 8.30 am to 5.00 pm Eastern Time and respond quickly to all email questions. Shipping or Payment questions? email Technical questions? email Can't wait for an email? Call us at 410 871 2273 You can fax payment information to us at 410 871 1255 Our Mailing ... moreAddress: Ridge Equipment Company. Inc 2002 Bethel Road Suite 105 Finksburg. MD 21048 Payment We accept American Express/ Visa/ Master Card/ Discover Directly. Or. Pay me securely with any major credit card through PayPal! Shipping 95% of our packages ship within 1 day! Shipping is calculated based on buyer's location using eBay's built in shipping calculator. We will combine shipping for multiple items. The calculated price includes a packaging charge to help cover the cost of foam-in-place packaging. We use this system for maximum protection when shipping electronic equipment. These images copyright Sealed Air Corporation Overseas Bidders: Click here for our Be aware that many of our packages are too heavy to ship with the USPS. These must be shipped via UPS International. Return Policy We always accept returns if the item is not as stated. Returns are handled as repair. Replacement, or refund at our discretion. We work with our customers to bring any problems to an acceptable resolution. 100% customer satisfaction is our goal. 95% of our boxes are shipped within 1 day of receipt of payment. We respond promptly to all email. We are also available by phone from 8.30
Omega TRCIII-A Portable Ice Point Thermocouple Reference Chamber Calibrator
Questions? Call us: 1-877-328-9236. Omega TRCIII-A Portable Ice Point Thermocouple Reference Chamber Calibrator. Manufacturer: Omega Model: TRCIII-A Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Omega Condition: Used. Comes in non-original packaging. This calibrator is in Good cosmetic condition with only minor blemishes from prior use. Notes: This unit is in Good working condition. We switched it on and let it cool down. Eventually stabilizing at 0ºC. When we inserted the probe of our uncalibrated thermocouple in one of the wells, it read pretty close to the same temperature on the display of the Ice Point. No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Omega TRCIII-A Ice Point Calibration Reference Chamber, Specifications: ... moreManufacturer: Omega, Model: TRCIII-A, Ice Point Calibration Reference Chamber, Uses distilled water at 0ºC to provide absolute temperature reference, Built in temperature readout, Portable. Rugged case for use in factory, calibration lab, or instrument shop, Accepts up to 6 probes at one time, Power: 110-120VAC 50/60Hz 105W, SKU: N20D028 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free S
Instron Extensometer Calibrator
INSTRON EXTENSOMETER CALIBRATOR BOECKELER INSTRUMENTS.THE UNIT appears to be in great condition. Please see pictures before bidding and ask questions if you have them. Thank you! Posted with
Gigatronics 8652A Power Meter 40 GHZ / Dual Channel + Option 12: 1GHz Calibrator
GIGATRONICS 8652A DESCRIPTION The Gigatronics 8652A Universal Power Meter. Dual Port, has the extensive measurement capabilities and features you need to test today's sophisticated communications systems faster, easier and more accurately. Features and Specifications of the Gigatronics 8652A Power Meter include: 100 kHz to 40 GHz Frequency Range. Depending on sensor-70 to +47 dBm Power Range. Depending on sensor Linearity ±0.02 dB GPIB CW Measurement Speed(rdgs/s) + Normal Mode 300 + Swift Mode 1.750 + Buffered Mode 26.000 GPIB Modulated Measurement Speed(rdgs/s) + Normal Mode 150 + Swift Mode 300 + Buffered Mode 800 Uniform Sample Rate of 20 MHz and Random Sample Rate from 2.5 to 5 MHz 20 MHz Maximum Diode Sensor Video Bandwidth 10 MHz Instrument Video Bandwidth Maximum CW Single Sensor Dynamic Range: 90 dB Maximum Single Sensor ... moreDynamic Range: + TDMA/GSM 60 dB + CDMA(IS-95) 80 dB + CDMA(10 MHZ bandwidth) 80 dB 100 ns Maximum Peak Power Sensor Rise Time Automatic Time Gate Setting Direct Crest Factor Measurement Statistical Power Measurement Analysis This unit comes with the following options: Normal 0 false false false EN-US X-NONE X-NONE 12- 1 GHz. 50 MHz Switchable Calibrator*All of our equipment has been tested. Additional calibration may be available upon request! ~Item sold with shown accessories. Power cord and a manual on CD(when available)~ PAYMENT AND SHIPPING INFO Warranty Info& Return Policy All goods or equipment sold by AxiomTest include a 30-Day Warranty. Warranty period starts the day the equipment is shipped. AxiomTest will at its discretion. Repair, replace, or refund the selling price for any malfunctioning equipment or goods, provided payment is made in due course, except in cases of improper application or misuse of goods or equipment by Customer. Shipping costs are not refundable. All goods or equipment sold by AxiomTest are subject to a limited 5-day ROR(Right of Return) unless otherwise noted. This ROR is limited to goods found to be non-acceptable due to cosmetic defect(no
Ametek T-740 Pneumatic Pump and AMETEK Electronic EPC 2000 Pressure Calibrator
Ametek T-740 Pneumatic Pump and AMETEK Electronic EPC 2000 Pressure Calibrator. Great working condition. Item calibration was up in 2006. Item fully tested. Batteries are brand new. Thank you.
Guzik 300210 C 201 Calibrator sn 909
Guzik 300210 C 201 Calibrator sn 909 Description Guzik 300210 C 201 Calibrator sn 909 Manufacturer Guzik Manufacturer Part Number 300210 Item/Ship Weight 1 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping We will professionally package. Using instapak foam-in-place ... moreif needed, and insure this product for safe delivery. Domestic shipping rates are available using the shipping calculator below, subject to terms& conditions. Please contact us for international shipping rates. Local pickup is encouraged for which all shipping and handling fees will be waived PID 43085 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping to make an adjustment to a different method which may change the price for shipping as well. This bug has been reported, but they gave no timeline for a fix, so if you are purchasing an item on the larger side(boxed size approx. 20x20x1
Capintec CRC-712M Radioisotope Dose Calibrator Console
Capintec CRC-712M Radioisotope Dose Calibrator Console Only(NO IONIZATION CHAMBER) Serial# 77033 Description: Capintec Radioisotope Dose Calibrator Console Model# CR C-712M. This listing is for the console only- ionization chamber is not included. Condition: The dose calibrator is in good cosmetic condition. Powers up and appears to be fully functional. We are unable to test it further. 14) Day Money Back Guarantee- Return it in(14) days for a full refund. Less all shipping costs. Shipping: Please use the shipping calculator! Check out my other items! Bid confidently. I have an excellent feedback rating The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, ... moreI will verify your status as an authorized purchaser of this item before shipping of the item. Alpha Equipment. LLC Broker PAYMENT INFORMATION I accept the following payment methods: FURTHER DETAILS As with most Ebay purchases the buyer is responsible for payment of the shipping. Please use the Ebay calculator based on the shipping weight. NEED FURTHER INFO? Thank you for viewing our listing. Please feel free to contact us for any of your specific medical or laboratory equipment needs. Powered by The free listing tool. List your items fast and easy and manage your active items.
GENERAL RADIO MODEL 1567: Sound Level Calibrator - Instruct Manual w/schematic
GENERAL RADIO MODEL 1567: Sound Level Calibrator- Instruction Manual w/schematic Manuals in good used condition. 14 day right of return. General description: GENERAL RADIO Model 1564A: Sound Level Calibrator- Instruction Manual w/schematic We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Wire Transfer Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) Shipping Information We ship ... morevia Fed Ex or USPS. Approx Weight: 1 lbs. Boxed Dim: 15x12 in. Envelope Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TUCKER or which TUCKER has a duty to collect in connection with the sale, delivery, or use of any item will be added to the bid and will be payable by Buyer. If sales to Buyer are exempt from such taxes, Buyer shall furnish TUCKER a certificate of exemption. Click Here to view our other listings on eBay TE# 716699 Loc: Powered by
GENERAL RADIO MODEL 1562A: Sound Level Calibrator - Instruction Manual
GENERAL RADIO MODEL 1562A: Sound Level Calibrator- Instruction Manual Manuals in good used condition. 14 day right of return. General description: GENERAL RADIO Model 1562A: Sound Level Calibrator- Instruction Manual We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Wire Transfer Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) Shipping Information We ship via Fed Ex or USPS. Approx ... moreWeight: 1 lbs. Boxed Dim: 15x12 in. Envelope Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TUCKER or which TUCKER has a duty to collect in connection with the sale, delivery, or use of any item will be added to the bid and will be payable by Buyer. If sales to Buyer are exempt from such taxes, Buyer shall furnish TUCKER a certificate of exemption. Click Here to view our other listings on eBay TE# 716699 Loc: Powered by
TEKTRONIX 104A Square wave generator/voltage calibrator Inst Manual/schematic
TEKTRONIX 104A: Square wave generator and voltage calibrator Instruction Manual w/schematic Manuals in good used condition. 14 day right of return. General description: TEKTRONIX 104A: Square wave generator and voltage calibrator Instruction Manual w/schematic; product# 47496 We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Wire Transfer Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) ... moreShipping Information We ship via Fed Ex or USPS. Approx Weight: 1 lbs. Boxed Dim: 15x12 in. Envelope Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TUCKER or which TUCKER has a duty to collect in connection with the sale, delivery, or use of any item will be added to the bid and will be payable by Buyer. If sales to Buyer are exempt from such taxes, Buyer shall furnish TUCKER a certificate of exemption. Click Here to view our other listings on eBay TE# 716699 Loc: Powered by
KURZ Instruments Series 580 Pocket Flow Calibrator Flow Meter model 580
Here is a KURZ Instruments Series 580 Pocket Flow Calibrator Flow Meter model 580. With instruction book and protective case. The meter is in nice condition, outside box shows some wear. Thanks for looking! di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13ed7f96b08-0xf4-
Fluke 725 Multifunction Process Calibrator CALIBRATED !
ebay template The Following Items Are Included: Fluke 725 Multifunction Process Calibrator(BC# 12799) Fluke TL-75 Test Lead Set(1 Red. 1 Black) Fluke AC120 Alligator Clips(1 Red- 1 Black) User Manual On CD-ROM Carrying Case BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! This Item Has A Current Calibration! Fluke 725 Multifunction Process Calibrator Measure volts. MA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters Source/simulate volts. MA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules Perform fast linearity tests with auto- step and auto-ramp features Includes Carrying Case And Accessories As Listed Above! Working Condition: Excellent Condition: Refurbished Calibrated: Yes Warranty: 90 Day Exchange Warranty Take ... morealong the new Fluke 725 Multifunction Process Calibrator. And you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature(RTDs and thermocouples) frequency, ohms, and pressure, using optional pressure modules. Do you need to calibrate transmitters? The 725's split display lets you view input and output values simultaneously. For valve and I/P tests. You can source mA while measuring pressure. The 725 has auto-stepping and auto-ramping for remote testing, plus 25% stepping for fast linearity tests. From the moment you pick it up. The Fluke 725 is ready to perform. Its simple controls, without menus, make operation easy. Its memory functions make set up fast. And its rugged design lets it work as hard as you do. The Fluke 725 Multifunction Process Calibrator is a powerful. Yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. Small. Streamlined shape makes it easy to carry Rugged. Reliable design stands up to field use Easy to read measure/source screen lets you view input and output simultaneously Measure volts. MA, RTDs, thermocouples, frequency, and oh
Terratek Fractometer Calibrator 7027A Computer Products PM505 Boschert Unit
Please look at pictures what you are going to get It powers up and appears to work. Thank you for looking.
PANTONE PERSONAL COLOR CALIBRATOR Color Accuracy for your Monitor CD
This item is being sold as-is in photo only. No warranty expressed or implied. Feel free to ask questions and make offers! Feel free to ask questions and make offers! NTB7015 NS1A3 JHT7467 20121025 g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13edcb481d9-0xf5-
ESI DB655A Electric Decade Resistor Calibrator Box 1/10/100/1K/10K/100K Ohm/Step
Search our eBay Store! ESI DB655A Electric Decade Resistor Calibrator Box 1/10/100/1K/10K/100K Ohm/Step SKU: JV-HAN-B-ESIDB655A Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge ESI DB655A Electric Decade Resistor Calibrator Box 1/10/100/1K/10K/100K Ohm. BEING SOLD AS-IS FOR PARTS OR REPAIR. Model: DB 655A. Decades: 6. Range: 1Ω-100kΩ. Physical Condition: Fair– Some minor scuffs/scratches on exterior. One terminal is missing. One terminal is missing plastic screw cover. One terminal is broken. Functionality/Degree of Testing: All decades rotate smoothly. Unit was tested ... morefrom 1Ω decade to 1kΩ decade and appeared to be within ±10% We do not have the necessary resources to further test this unit. Unit may require calibration. Dimensions(L" x W" x H" 6-1/4 x 8-1/2 x 6. BEING SOLD AS-IS FOR PARTS OR REPAIR. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limi
Thermo Electron- Permeation Calibrator Model 143
Thermo Electron Permeation Calibrator Model 143 in good working used condition. Sold as is
USED eye-one display 2 Pro Monitor Display Color Calibrator By X-Rite
SquareTrade © AP6.0 Stock Photo Used-PLEASE READ- DESCRIPTION BEFORE BUYING Guaranteed 100% working and as described. Guaranteed against DOA. Guaranteed as described. Please feel free to ask any questions beforehand. BARELY USED 100% functional Eye-one display 2 Pro Monitor Color Calibrator By X-Rite INCLUDES: Main Unit. Bottom Cover. Counter Weight. No box or software CD. Buy with confidence! Seller ID Verified PayPal Verified& Confirmed Full eBay Buyer Protection Trusted Seller Click here to see my other Creative Professional items Guaranteed against DOA. Guaranteed 100% functional. Guaranteed as described. Returns for any other reason will be accepted minus shipping costs. Cannot ship to PO Boxes or IPO because delivery confirmation is required. Buyers withzero or low feedback please contact me before purchase. We usually ship ... morethe next day when possible. Or within 24 business hours after cleared payment(arrival times vary) International bidders please contact me for shipping costs if your country is not listed. International orders can take longer to arrive. Even several weeks if held up in your country's customs department. International orders may be subject to customs charges depending on your country's rules. Delivery confirmation for International postage may be delayed until after actual delivery takes place. Delivery confirmation number provided. Art• drawing• illustration• animation• CAD• painting• design• watercolor• chalk• pastels• brush• graphic• whiteboard• class• education• teacher• educational• instruction• instructor• presentation• lettering• calligraphy• SquareTrade © squaretrade warranty v2.0
Heathkit IG-4505 Oscilloscope Calibrator
Heathkit IG 4505 See my other items for more Heathkit stuff Posted with
Pulsar Acoustic Calibrator Model 10 - Acoustic Coupler Sound Level Calibrator
Pulsar Instruments Acoustic Calibrator Model 10 Acoustic Coupler Sound Level Calibrator I know nothing about this- I flip the switch and it makes noise. Instrument says: Pulsar Instruments Inc. Sound Level Calibrator 95dB; 1000 Hz Serial No. 1975 Box says: Pulsar Instruments Inc. Model 10 Calibrator Acoustic Coupler Sound Level Calibrator with OSHA sound level So if you need this. Here it is: Please email with any questions. Payment is due within three days of close of auction; at time of purchase for Buy It Now.
Fluke 5200A Programmable AC Calibrator,100-230V,50-400Hz inverted Lgic,USA
2783B1/eO Fluke 5200A Programmable AC Calibrator.100-230V,50-400Hz inverted Lgic,USA Country USA MN# Model 5200A. Input: 100/115/200/230Vac +-10% Remote Pragramming 50-400Hz inverted Logic, Option: None. S/N: NA Weight(Kg) aro 25 Kg, 27 Kg with box) Dia(WxLxH) cm 59 x 44 x 19(instrument only) Condition Used. Good Physical condition. Connector ok. Minor dirts and scratches marks on body. Right side Top panel has few dirt marks. One knob cover missing. Unit taken from Lab. It was put to offline for soem time. Power on with 110Vac. The power on green LED on, mode- stdby Led on. Control Rem LED on, Sense Int on, Overload LED on. Knobs adjustable and the display change accordingly. Condition of the unit unknow beside power on observation. Selling as AS-It. Return not accepted for this item unless it physical condition is not as shown and described. ... moreOutLook Actual unit as shown in picture. Minor dirts and scratches marks on body. We are not able to test it full functionality beside the above observation. We only assure the above described observation. Hence Selling as AS-IT. Please feel free to write to us if you would like to know more about the unit prior bidding. Accessories NA. Only the unit show in the picture. Items not list here are not inclusive even it is a standard parts. Note To Buyer As this is used goods. We may not have sufficient knowledge to test it functionality. If you are not satisfy with the item purchased. Kindly notify us immediately, we will do our best to solve your concerns. Kindly do not leave negative feedback without communicate your concern to us. Warranty NA. AS-IT condition. We do not perform full functionality check beside what we decribed above. Payment Payment By Bank TT or PayPal. Return Policy Return not accepted. Shipping Buyer can choose the following: 1. Use your own Freight Agent. Please provide your shipping agent contact or A/C for us to contact. 2. Use our Flat rate service to selected countries if this option is offered. Usual Service is Air Parcel or Fedex Eco. 3
VINT FOXBORO MAGNETIC FLOW INSTRUMENT CALIBRATOR, MODEL 8120 6 WORKS!!!
This listing is for a working Magnetic Flow Instrument Calibrator. Model 8120 6 made by Foxboro. Operates on Phase Band E; 118V/60Hz. Includes case. Check out my! PLEASE NOTE: This item ships via FEDEX GROUND OR HOME DELIVERY at our commercial rate. OUR RETURN POLICY: We make every attempt to describe the items we list accurately. IN THE EVENT YOU DETERMINE THAT THE ITEM WILL NOT WORK AS YOU THOUGHT IN YOUR APPLICATION OR USE OR JUST CHANGED YOUR MIND. ITEM PURCHASE PRICE ONLY REFUNDED, AND ITEM MUST BE RETURNED IN ORIGINAL RECEIVED CONDITION AND PACKAGING, 10% RESTOCKING FEE APPLIES, INITIAL SHIPPING WILL NOT BE REFUNDED. YOU MUST LET US KNOW YOUR PURCHASE IS NOT GOING TO WORK AS SOON AS POSSIBLE UP TO THE 14 DAY PERIOD MENTIONED ABOVE AND THEN SHIPPED WITH TRACKING DATE AND NUMBER WITHIN 3 BUSINESS DAYS AFTER CONTACTING US REGARDING YOUR ... moreWISH TO RETURN THE ITEM(S) FOR ANY REFUND. IT IS IMPORTANT TO US THAT YOU GET YOUR ITEM PRICE(NO SHIPPING) BACK AS THE REFUND AND WE HAVE THE ITEM RETURNED, AND AS SPEEDILY AS POSSIBLE WITHIN THE TIME FRAMES MENTIONED ABOVE. Powered by The free listing tool. List your items fast and easy and manage your active items.
Ectron 1100-CF Thermocouple Simulator-Calibrator
Ectron 1100-CF Thermocouple Simulator-Calibrator International buyers must provide their own shipping account to ship unit on. International buyers must provide own shipping account& pass US Customs security screening. SHIPPING COSTS MAY DIFFER FROM EBAY LISTING PLEASE CALL Please visit us at: Or call: Ask for Shaun Long 1-530-278-9114
Fluke 743B Documenting Process Calibrator 743 W/ 700PD4 Pressure Model & Ametek
Fluke 743B Documenting Process Calibrator 743 W/ 700PD4 Pressure Model& Ametek T-730 is in good working and cosmetic condition. Tested and works. Recently used in a working environment.Unit is out of calibration. Comes loaded Fluke 700PD4 pressure module and Ametek T-730 portable pneumatic hand pump. Includes everything pictured. See pictures. International buyers are welcome. I will ship within one business day. Feel free to ask any questions. I am always happy to help. Thank you.
Heathkit Voltage Calibrator Model VC-3 for Use With Oscilloscope - Not Tested
Nice eBay find! A Vintage HEATHKIT VC-3 voltage calibrator used with oscilloscopes. Untested. As is. Can be a great parts project. Thanks for looking!
FirstTemp Genius Calibrator 3000-PC
FirstTemp Genius Calibrator 3000-PC Please note that the cost of shipping and listing has gone up as well as the time of delivery. Please take this in consideration when evaluating ebay performance. I DO NOT WARRANTY OR GUARANTEE ANY INTERNATIONAL SALES EXCEPT FOR CANADA. ALL SALES OUTSIDE OF THE US AND CANADA ARE AS REGARDLESS OF ANY STATEMENT ABOVE.
Lot of 6 LC Packing Dionex P/N 161406 Calibrator Cartridge Monolithic 200 Column
Item up for sale is a: Lot of 6 LC Packing Dionex P/N 161406 alibrator Cartridge Monolithic Column Monolithic 200 Item is used and is untested other than what is indicated below: If you have any questions regarding this item please feel free to contact me and I will do my best to answer your questions 6 item as shown in picture. Picture represents the actual item. 4 Pounds in a box with packaging materials Included is only what is mentioned. No other cables. Parts, power cords, power adapters, software or any other accessories included. ============================================================================ Terms of Sale Payment Options PayPal only or contact us for payment methods to pay on pickup. Bank transfers or payments using a Cashier’s Check may be available. Contact us for additional information and fees. RETURNS Warranty for ... moreItems shipped in the US 14-Day Right to Return- Buyer has 14 days to test item to determine its operational condition unless it was listed as Parts-Only or As-Is. Should the item be received non-operational you may return the item for refund of the purchase price. 14-day period starts the day you receive the item. You cannot return an item because it is not compatible with the system you installed the item into. Please insure that the item you are purchasing is compatible with the application or in the system you intend to use it. Warranty for Items shipped outside the United States All international sales shipped to a destination outside the US are non-refundable. All international sales are final. SHIPPING Shipping within the United States Buyer is responsible for all shipping costs including returns. Please note for domestic shipments(within US) we ship FedEx ground only. But you can use UPS ground shipping rates(calculated automatically by eBay) to estimate the shipping charges. Actual FedEx ground rates may be cheaper then UPS depending on the destination, so for heavy packages you can always contact us to get the exact shipping rate. FedEx does not ship to PO Boxes- p
Electronic Development Corporation 3200 TCA-6 AC/DC Current Calibrator *Tested*
DESCRIPTION This current calibrator is used and was tested to power on. It has scuffs/scratches from general use and power button is indented in. Includes power cord. Note that cables and other accessories are NOT included. Sold exactly as pictured. What's NOT Included: Cables and other accessories Manufacturer: Electronic Development Corporation Model: 3200 Cosmetics: Used Test Results: Powers on GO GREEN Lower your shipping cost and help the environment! If you are purchasing this item for a specific part or parts. Please let us know. We can pack only the part(s) OR piece(s) you want, send a revised invoice to properly reflect the change in weight, and properly recycle the rest! Electronics Cafe specializes in used electronics. When you buy used. Fewer electronics end up discarded or in landfills; it saves the raw materials necessary ... moreto manufacture new electronics; and it saves the energy used, and pollution created, in the production, manufacturing, and transportation of the new item. That means less resources and waste are cluttering up the Earth's environment! ELECTRONICS CAFE GUARANTEE Thanks for looking at our auction! We are offering a no-hassle. Full guarantee on this item- we'll do what it takes to get five-star ratings across the board. We've been selling on eBay since 1999- our customers are the most important thing to us! Bid with confidence! Questions? Comments? Concerns? Contact us. Every inquiry is of utmost importance and we treat it as such. We strive to provide 5-star service in every category you can rate us on! We greatly look forward to working with you! Power supplies. Cables, batteries, and other basic accessories are NOT included unless stated otherwise. Returns are ONLY accepted if an item is inadvertently misrepresented. TERMS We accept PayPal and Visa/Mastercard. Payment is expected within 7 days of auction end. eBay will automatically send an Unpaid Item Reminder after 4 days. Please note that local pickup is free. SHIPPING Please see the"Shipping And Payments&quo
HP Agilent 745A AC Calibrator W/Opt. C91 Instrument Blower
You are bidding on a HP Agilent 745A AC Calibrator W/Opt. C91. This unit is used and in great working condition. Model/N: 745A W/Opt. C91 Instrument Blower Option. S/N: 1139A01027. The unit does have two bulbs that are burnt out. One on the second and fifth digit. These two bulbs do not hinder in any way the reading of those two or any of the digits for that matter. All digits can be seen and read easily. Details: This unit provides output voltage variable from 0.1 mV to 1099.999 volts in steps as small as 1 ppm. A compact. Calibrated AC source with continuously adjustable frequency output from 10Hz to 110KHz. Basic accuracies for the 1mV to 100V range are as follows: ±0.02% 50Hz to 20KHz) ±0.5% 20 to 50Hz. 20 to 110KHz) ±0.2% 10 to 20Hz) Accuracy is reduced slightly on the 1000 V range. Key Points: Output voltage variable: ... more0.1mV to 1099.999V in steps as small as 1ppm Continuously adjustable frequency output: 10Hz to 110KHz Basic accuracy's for 1mV to 100V range: ±0.02% 50Hz to 20KHz) ±0.5% 20 to 50Hz. 20 to 110KHz) ±0.2% 10 to 20Hz) Powered by The free listing tool. List your items fast and easy and manage your active items.
Fluke 5100B AC/DC Calibrator w/Opt.3 & Opt.5
You are bidding on a Fluke 5100B AC/DC Calibrator. This unit is used and in Excellent condition. Unit shows last calibration was in 2010 and show a calibration due date of Sept 2012. Unit comes with Digital cable and power cord. Model# 5100B UNIT IS EQUIPPED WITH WIDE BAND FREQUENCY OPTION-03& IEEE 488 GPIB Interface OPTION-05 S/N: 3875004. Fluke 5100B AC/DC Calibrator. The 5100B supplies AC& DC voltage. AC& DC current, and resistance for precise applications, such as calibrating digital multimeters. The 5100B AC/DC Calibrator calibrates precision meters that measure AC or DC Voltage(0-1100V) AC or DC current(200 uA-2A) and Resistance(1 ohm to 10 Mohms) Accuracies are: DC voltage and resistance(0.005% DC current(0.025% AC Volts(0.05% and AC current(0.07% Features: DC& AC Volts: 20 mV to 1100 V full scale(0.1 MicroV resolution) ... more50 Hz to 50 kHz frequency of standard unit DC& AC Current from 200 MicroA to 2A full scale 1 O to 10 MO resistance in decade steps Wideband option HP-IB and Bit serial interface, Powered by The free listing tool. List your items fast and easy and manage your active items.
Beamex MC6 calibrator
Very good condition only used once Beamex MC6 is an advanced. High-accuracy field calibrator and communicator. It offers calibration capabilities for pressure, temperature and various electrical signals. The MC6 also contains a full fieldbus communicator for HART, FOUNDATION Fieldbus and Profibus PA instruments. The usability and ease-of-use are among the main features of the MC6. It has a large 5.7” color touch-screen with a multilingual user interface. The robust IP65-rated dust- and water-proof casing. Ergonomic design and light weight make it an ideal measurement device for field use in various industries, such as the pharmaceutical, energy, oil and gas, food and beverage, service as well as the petrochemical and chemical industries. The MC6 is one device with five different operational modes. Which means that it is fast and easy to use, ... moreand you can carry less equipment in the field. The operation modes are: Meter, Calibrator, Documenting Calibrator, Data Logger and Fieldbus Communicator. In addition, the MC6 communicates with Beamex CMX Calibration Software, enabling fully automated and paperless calibration and documentation. User interface• Large 5.7” VGA(640x480) color touch screen• Touch areas optimised for finger use(gloves/stylus) Membrane keyboard as secondary way to use• Number/ QWERTY text entry• Multilingual interface Automated procedures• Deep integration with CMX• Connection diagrams and guided procedures Robust. Lightweight and ergonomic design• IP65 casing• Drop/ vibration tested• Wrist/ neck strap User-interface modes• Meter- a simple and easy way to measure• Calibrator- measure or generate/simulate two signals at a time. Documenting Calibrator- perform automated. Documented calibrations of process instruments• Data Logger- perform multichannel(up to 9 channels) data logging• Communicator- field communicator for HART. FOUNDATION Fieldbus and Profibus PA instruments• Settings- manage settings of the MC6 Functions• Pressure measurement• Voltage measurement• Curr
GILIAN GILIBRATOR 2 FLOW CALIBRATOR w/ BUBBLE GENERATORS 20CC-6LPM #3
GILIAN GILIBRATOR 2 FLOW CALIBRATOR w/ BUBBLE GENERATORS 20CC-6LPM#3 Description: Thank you for your interest! We are auctioning off this SENSIDYNE GILIBRATOR 2 FLOW CALIBRATOR w/ BUBBLE GENERATOR. Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. Comes as shown! Some cosmetic wear. Powers up. Comes up"error" on d isplay. Includes Main unit. AND,Bubble gen erator( STD) 2-30LP m. No power adapter included. USA CUSTOMERS- NO MEANS TO TEST. May have other unknown issues. Sold as is for parts or repair! INTERNATIONAL CUSTOMERS- NO MEANS TO TEST. SOLD AS IS WITH NO GUARANTEES. 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to ... moretest equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6. It is the bidder's responsibility to understand that the terms of the auction. The nature of equipment offered and bid accordingly. Shipping: BUYER TO PAY SHIPPING IN THE US. Alaska& Hawaii will be more! INTERNATIONAL BIDDERS WELCOMED-PLEASE CONTACT US FOR ACCURATE SHIPPING CHARGES. Payment: Gladly accept most forms of payment including paypal, Click to Enlarge click to Enlarge inkfrog terapeak. I000000. InkFrog Analytics.
Extech The Oyster Current Calibrator B980631
All purchases must be made on eBay. We will not remove items from eBay to sell directly. Free shipping service is only available in the continental United States and only on qualified items. Manufacturer: Extech Item Title: The Oyster Current Calibrator Model Number: B980631 Specifications: Plug not included Comes with strap Condition: Used(Unit was pulled from a parts room and we are unable to test) Quantity: 1 SOLD AS IS Please use the shipping calculator tab at the top of the page to determine your shipping costs. Please review the"Shipping and Payments" tab above the auction before purchasing. Some notes on Shipping: Free Shipping is for domestic orders only and will be shipped via Fedex SmartPost. Fedex Ground, Fedex Home Delivery or USPS Parcel Post depending on the weight and destination. Items weighing over 120lbs will be ... morepalletized and shipped via freight carrier. We get very good rates on freight shipments. Please use the shipping calculator to determine shipping costs. Shipping to a commercial location with loading dock or forklift is always the cheapest option for freight. Rush Delivery is available upon request. Please e-mail for quote(please include zip code) Handling Time is normally only 1 business day. Please use the shipping calculator to determine transit times. Holidays are an exception) Your tracking number will be emailed to you once your order has been shipped. A note to international buyers: FedEx International Economy& Priority shipping services are available for qualified packages worldwide. FedEx International ground service is available for Canada& Mexico. Package tracking and improved delivery times are advantages over USPS. E-mail us for a shipping quote. Please provide destination city, country, postal code, broker and broker phone number. CSI Surplus is not responsible for any duties. Taxes or any other fees that may be imposed by customs when your package reaches your country. By placing an order with CSI Surplus, you agree to accept any and all charges that may
ALTEK TRANSCAT 5500E FREQENCY CALIBRATOR
USED PLEASE SEE PICTURES FOR MORE DETAIL Jash-AL 5/29/13(0493-1) VERY IMPORTANT INFORMATION… PLEASE READ CAREFULLY: ALL UNPAID ITEMS WILL OPEN UI CASES AFTER 7 DAYS FEEDBACK Your feedback is greatly appreciated! We are more than happy to leave our customers feedback for each transaction. If you feel as though you have not had an excellent experience with us. Please contact us via eBay Messages prior to leaving negative feedback.We are more than happy to work with you to the best of our abilities to resolve any and all issue that you may have had with our transaction. RETURNS We have a 30-day 100% money-back guaranty on all items. If you need to return an item. Please contact us via eBay Messages within 30 days and we guaranty that we will take care of the issue in a timely manner. Returns must be received in the same condition as they were ... moresent in. As per eBay policy, we will issue a refund upon receipt and processing of the returned item. Please allow at least one business day(Monday through Friday) for your return to be precessed. SHIPPING We ship 5 days a week(Monday through Friday) We will always ship the fastest and most economical way possible in order to get your item(s) to you as quickly as possible.We use USPS First-Class Mail and USPS Priority Mail for most items. And we will generally use UPS Ground service for larger items. All standard service shipping is free to the 50 United States although Alaska, Hawaii and US Territories MAY require additional shipping fees. You will be contacted via eBay Messages in the rare occurrence that additional handling charges are necessary. PLEASE SEE NEXT DAY AIR INFORMATION BELOW! NEXT DAY AIR/ EXPRESS SHIPPING DOMESTIC Next Day Air shipping can be arranged. If you wish to have an item shipped via Next Day Air you must contact us via eBay Messages NO LATER THAN 1:00pm(Pacific Time) There are two ways that we can handle Next Day Air shi
KAYE HTR-400 DRY WELL TEMPERATURE CALIBRATOR/ REFERENCE BATH
Inventory Number: 04131460232 Manufacturer: Description: KAYE HTR-400 DRY WELL TEMPERATURE CALIBRATOR/ REFERENCE BATH Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, INCLUDES ANVIL CASE, TESTED, POWERS UP, NOT TESTED FURTHER BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer ... moreBuy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement for returned items. Additional information: We often have multiple quantities of some auction items and sell additional items wi
TRANSMATION MODEL 1040 PPS DIGITAL CALIBRATOR ^
Please keep in mind that. According to eBay, when anything less than a 5 on the"star" feedback system is left, it is considered by them to be a negative buying experience. My items are accurately described to the best of my ability. All items are sent with Fedex in Canada and USA. Overseas buyers will receive their items via Canada Post. I will give you a tracking number over the eBay message system after the item is given to the courier. Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false ... morefalse false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Condition: AS-IS. Untested. No guarantees on functionality and no returns/ refunds/ exchanges. No other accessories/ hardware/ software. WE WILL REQUIRE A PRINTOUT OF THIS EBAY SALE FOR LOCAL PICK UP SKU: 1-D6-513 Item will be sent with Fedex if you are in Canada or USA. Overseas buyers will receive their items via Canada Post. In most cases items are given to courier 1-3 business days after full payment has been received. Unless there are special circumstances(such as waiting for combined shipment, public holiday, etc) Thank you for your interest in this sale! Local Pickup available 9:00am-5:30pm on regular weekdays only.
Larson-Davis Labs Model 710 Dosimeters 2Xs, 114dB Acoustic Calibrator CA250
Included with this set are: 2 Larson Davis 710 Dosimeters with their microphones, A CA250 Acoustic Calibrator. Dosimeter cases, And the instruments corresponding accessories. These items are in very good condition. Refer to photos.
RARE~ fluke model 540a transfer standard calibrator type unit working condition
This unit made in the usa top quality unit. sold in working condition. Was working last time used a few years ago.
Omega MDL CL23 Calibrator Thermometer Type J, K, T Thermocouple DG19
Omega MDL CL23 Calibrator Thermometer Type J. K, T Thermocouple DG19 Includes Thermocouples. Case, battery, Belt Clip Please feel free to email with any questions that you may have. And I will do my best to try to help. Please give us a call at 860-242-4953 to discuss payment options. All duties and customs fees to paid by bidder. We do accept personal checks. Bank checks, company checks, and bank wire transfers. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us at 860-242-4953 ... morewith any questions or concerns. We do out best to ship quickly, but never at the expense of quality delivery. RETURN POLICY: This unit is being sold as-is. The auction description is written as a guide. We strongly recommened that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953, and we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid.
Martel Electronics Beta Model 110 DC Frequency Calibrator
This is a Beta Model 110 DC Frequency Calibrator. Its in good working condition. Comes with battery pack. Charger, leads, case and whatever else I can find with it. Any other questions please let me know Will be shipped after payment clears. No International Shipping at this time.
Eaton 533X-11M Variable Repetition Rate Impulse Generator/Calibrator Part/Repair
Eaton 533X-11M Variable Repetition Rate Impulse Generator/Calibrator Part/Repair Move mouse over images to see larger version Click to view supersized image Eaton Impulse Generator for Parts or Repair Item Description: 1x Eaton 533X-11M Impulse Generator(Calibrator) 1x Power Cord. No accessories or documents included. The full specifications for the 533X-11M can seen on-line at. Sold for Parts or Repair. Condition: Unit does not power on. No further testing done due to lack of equipment. Some scuffs and scrapes(see pictures) Details: 10kHz-1GHz. Pictures of Actual Item. Sold As-Is. For Parts or Repair. No Returns Accepted on This Item. Location ID: John-H1A BID WITH CONFIDENCE! We strive to describe every item to the best of our ability. We are a surplus dealer and are not experts on many of the items offered. Please research the item with ... morethe manufacturer to make sure that it will be compatible with your needs. Customer Service is our utmost priority. If you are dissatisfied with any item please contact us so that we may address the issue. We value your business and pride ourselves on our repeat customers. Digitalintl is a sister-startup of Computersintl. View our feedback here. John Paypal Preferred: Items can only be shipped to the shipping address that is submitted with your Paypal payment. If your Paypal address does not match the shipping address. Please modify the address before submitting payment. Please notify us through the Ebay Messaging panel. Notification is also required if your Ebay and Paypal addresses are different. If no notification is received and your item is shipped to the incorrect address you(the buyer) will responsible for any additional charges. Local Pickup: Please contact us for payment terms. Contact us if you have any questions on payment methods prior to bidding. IF Free Shipping is offered it applies to the CONTINENTAL USA(48 contiguous states) ONLY. We cannot ship on your account or on 3rd party accounts. Freight shipments must be scheduled by DigitalIntl. Flat Rate
BIO DESIGN ECG Calibrator SIMULATOR AS IS 2 UNITS UNTESTED
as is untested(I think they need new batteries) CONDITION OF ITEM IN THIS LISTING IS:4.5 The item condition numbers and their definitions are below: Conditions 2.3,4, and 5 will all have wear from use as pictured. 1. NEW 2. Used. But FULLY TESTED TO WORK PROPERLY 3. Used. Powered up and guaranteed not to be DOA. Not fully tested. 4. Unable to test due to lack of knowledge or inappropriate power source. 5. Failed testing and is being sold for parts ITEM SHIPS FROM USA. OFFICIAL US RELEASE. SOLD AS IS FOR PARTS OR REPAIR. UNTESTED, DON'T KNOW IF IT WORKS PROPERLY! Trusted Seller and known to ship fast! Just check my feedback $$ Serious Bidders Please $$ $$ After The Auction Has Ended Payment In 2 Business Days Will Be Highly Appreciated $$ $$ I Only Accept Paypal $$ f After Payment Has Cleared; Item Will Be Shipped Out Within 48 Hours f ... moref Please Confirm Your Shipping Address When Paying Through Paypal f f I Only Ship To Lower 48 States Of USA. NO APO. FPO f q If you are not satisfied. You may return the item within 3 days of receiving it for refund(s&h is non-refundable) q q The buyer is responsible for all shipping charges to seller on returned items q q All my inventories are recorded with serial number to avoid scams q q Once the item is inspected. The refund would be made q If you have any questions or concerns. Please email me prior to bidding and I will be happy to respond. Thank You And Happy Bidding! ~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~ ~ 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-13f05c4a660-0xfb-
Data Precision 8200 Calibrator Original Instruction/Service Manual
You are bidding on a used Original Data Precision 8200 Calibrator Instruction/ Service Manual. Part# 62-5018 Manual contains operating instructions.Parts list and schematics overall the manual is still in good used condition. Picture is of actual item so what you see is what you get. As with everything I sell it is sold as is I have no control over how the item gets used or handled. I will accept paypal as payment.
Hewlett Packard HP8900B Peak Power Calibrator Operator & Service Manual
Hewlett Packard 8900B Peak Power Calibrator Operator& Service Manual This is a paper-back. Original, complete, Manual Weight: 50g Condition: Used. In good condition. Complete Postage& Packaging: Postage within the UK will be £2. Anywhere else in the world please contact us with your full delivery address and we will find you a favourable shipping quote for this unit. If you have any more questions please do not hesitate to contact me by email: marc@telfordelectronics.co.uk Phone: 01952 605451 Powered by
color vision monitor calibrator
color vision monitor calibrator just the unit. No software
Vintage Lampkin Laboratories RF/ Calibrator / Rec'vr / Steampunk ?
This is a Vintage Lampkin Laboratories RF/ Calibrator/ Rec'vr? Type 105B Serial 1999- Rating 2350-2670 KC- Power Supply 115V50-400C Not tested. This item was part of an estate of a ham radio enthusiast. So I do not know, nor can I guarantee the age, history, origin, material etc. only what I was told so you be the judge by carefully examining all photos and asking any questions you may have(prior to bidding) as there are no returns. Thank you.
CEL-240 Sound Level Meter & CEL-282 Calibrator
CEL-240 Sound level meter and CEL-282 calibrator. Works as intended. But will need calibration. Both are used. Batteries(3 AA and a 9 volt) not included. The windscreen is included. Please ask any questions; returns will be accepted, see policy.
X-Rite Eye-One i1 Display Color Calibrator #5439 Free Shipping AS-IS
X-Rite Eye-One i1 Display Color Calibrator#5439 Free Shipping AS-IS. Condition: Untested. Accept As-Is Includes: only what is pictured Item pictured is the actual item for sale. Shipping Time: At Roberts. We take pride in our shipping promptness. We strive to ship out every order the same day or next business day, depending on the time of day that your order is placed. We want you to receive the item as quickly as possible! Sales Tax: We are required to charge state sales tax on items shipped to addresses within Indiana. Local Pickup: Roberts is NOT currently offering local pickup for eBay purchases. International Customers: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional ... morecosts will be prior to bidding or buying. We will not declare any package as a"Gift" and we will declare the exact selling price on the customs documents as required by law. If you choose International First Class Mail. This method is not trackable and can take up to 60 days for delivery in some countries. For faster delivery times. Please select International Priority Mail or International Express Mail. Once your package leaves the USA. The package cannot be tracked until the receiving country's post office scans the package and updates the status. RM
Simpson 884 Type S2A Sound Level Meter +890 Sound Level Calibrator FOR PARTS
Simpson 884 Type S2A Sound Level Meter +890 Sound Level Calibrator FOR PARTS OR REPAIR Meter Specifications: SOUND LEVEL Ranges: 40 to 140 dB Reference: 0dB = 20m Pascals Accuracy: Meets ANSI S1.4-1983 Weighting: 884-2 type S2A(only) A" external filter for flat response) MICROPHONE Type: Condenser type L size per ANSI S1.12-1967 Impedance: 350±20% 23°C Characteristics: Omnidirectional. Angle of incidence approximates random response equal to 70° SIGNAL OUTPUT External filter: 120mV RMS at meter reading of +10dB RMS Output: 1.00V RMS at meter reading of + 10dB dB Output: 1.5 VDC at meter reading of + 10dB Calibration: Frequency=1000Hz@ 94dB on the 90 dB range. 114 dB on the 110 dB range. Screwdriver adjustable(from side of case) METER MOVEMENT Type: Pivot and Jewel. 2 1/2" dial Scale: 10 to +10 dB w/15) 1dB markings ... moreAccuracy: 2% Response time: Slow = 2.5 dB to a 500ms tone burst of 1000Hz Fast = 2.0 dB to a 200ms tone burst of 1000Hz OUTPUT JACK Type: Switchcraft# 750(0.141"dia. f/external filter. 850(0.097" dia. f/dB and RMS output Calibrator Specifications: Frequency Source Range: 1000 Hz +/1% Output Sound Pressure: 114 or 94 dB +/ 0.5 dB Distortion: Less than 2% Operating Temp. Range: 0 Degrees to 50 Degrees C These units have been tested to power on. But the sound calibration function on the unit does not work. Corresponding documentation, carrying case, and wrist strap are all included. Batteries are not included. And the unit is being sold AS-IS. With NO warranty. Please read the following terms of sale carefully. These terms constitute a legally binding agreement( contract) between the seller and buyer. By bidding on. Or purchasing, the product posted in this eBay listing, the winning bidder agrees to and accepts all of the terms of sale stated below. TERMS OF SALE: Only what is shown in the eBay photo and mentioned in the listing is included. Anything else should be understood to not be included. For sale is for the eBay item only. No service or tech support are included,
GENERAL RADIO 1565B SOUND LEVEL METER 1562 PERMISSIBLE SOUND LEVEL CALIBRATOR
The items offered are the General Radio 1565-B Sound-Level Meter& 1562 Sound-Level Calibrator. Both items are in good working condition. Auction includes: Type 1565-B. Type 1562, manuals for both unit's& hard case.
Acoustical Calibrator Metrosonics Inc.
Metrosonics Inc. Acoustical Calibrator model cl304. ANSI S1.40-1984, 102db Nominal Sound Pressure, 1KHz. Requires NEDA Type 1604A Battery. Ships via fedex Ground.
Stell Cal 01 Acoustic Sound Calibrator BAC012 Made in France 94db -20db + 20db b
For consideration is a Stell CAL 01 sound calibrator. The unit seems to be in good cosmetic condition. It has some stickers on the case. The unit powers on when a battery is inserted. Any needed calibration is the responsibility of the buyer. Returns will be for DOA only- Thanks for looking! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f0d51de50-0xff-
QUEST 2900 INTEGRATED SOUND LEVEL METER W/ QC-10 CALIBRATOR
QUEST 2900 INTEGRATED SOUND LEVEL METER W/ QC-10 CALIBRATOR Description Quest Technologies 2900 sound level meter. The unit comes with everything seen in the pictures and as outlined below: Listing Includes Quest 2900 sound level meter Quest QC-10 Calibrator Quest 056-990 1/2" microphone calibration adapter Quest 1/2" microphone Philips and flat screw drivers Carrying case Condition The test set is in excellent condition as seen in the pictures. It works without a problem! Please note that the briefcase for it is dented in one corner as seen in the last picture. Item is guaranteed NOT DOA! Buy with confidence and without the hassles of bidding! Payment must be received within 3 days of the end of the auction! Please follow the ebay checkout instructions for payment submission. Shipping in the US is $0.00. Except for HI, AK, and ... morePR. We ship the same or next day of payment receipt! Buyer is responsible for all shipping costs associated with this transaction. Shipping costs are non-refundable! We do ship internationally. Please inquire for international shipping cost to your country. Powered by
Fluke 5700A Series II General Calibrator with option 03
Fluke 5700A Series II General Calibrator with option 03 Meter Calibrator The 5700A Calibrator is designed to cover the widest portion of today's calibration workload- a wide variety of DMMs from all manufacturers. It delivers direct voltage to 1100V and alternating voltage from 220V to 1100V at frequencies from 10Hz to 1.2MHz. Cardinal point resistances range from 1-ohm to 100 Mohms in x1 and x1.9 decades. Including a short. Direct and alternating current are provided to 2.2 A, and frequencies for alternating current range from 10Hz to 10kHz. In service since 1988. The 5700A has undergone continuous improvements to become the 5700A Series II, one of the most tested and reliable high precision calibrators Fluke has ever produced. Considered the calibration standard worldwide, the 5700A delivers high value as well as accuracy covering 5 ... more1/2 to 7 1/2 digit dmms. Plus it offers the same ease of use, low cost of ownership, rugged design, simplified support and confidence building features as the 5720A. Specifications for both the 5700A and 5720A are stated with a choice of confidence levels. Now. You can use the conservative 99% specifications that Fluke traditionally publishes, or more aggressive 95% specifications recommended in many international procedures. In addition to allowing you to trade a small amount of risk for better performance, 95% confidence level specifications allow easier measurement intercomparisons. Both specifications are available at a press of the SPEC key for any output. Both the 5700A and 5720A can emulate. Via the remote interface, either a 5100B or 5200A calibrator, permitting them to replace those older calibrators in automated systems with little or no impact on software. In addition, it is compatible with the 5725A Amplifier, and 5205A or 5215A Precision Power Amplifiers. Options: Option 5700A-01 = Rear Output Option 5700A-03 = Wideband AC Voltage Option 5700A-04 = Rear Output + Wideband AC Voltage. Item condition: working condition. In order to make sure all the items in good worki