|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Neu Location: China Search range: 1200m. With this detector, you can go to more places to explore the treasure, search for gold, silver, copper, and gems. - 6 x Antennas. ... more- Signal frequency: 360~440Hz. If the area of the object is larger, the depth of detection will be deeper.
Buy It Now
$12.00 Shipping Condition: Used Location: Crystal Lake, United States Note-there is no female or male pin inside but 100# open.
Buy It Now
Free Shipping Condition: New Location: United States You may need to sign in. Pet Supplies.
Buy It Now
$4.99 Shipping Condition: Used Location: Kensington, United States For easy reference, a panelboard compatibility list is provided with each circuit breaker. Product Series: Type QD. Product Type: Circuit Breaker. Thermal ... moremagnetic trip range.
Buy It Now
Free Shipping Condition: New Location: Austell, United States BURNDY GC4C4C / GC4C4C (NEW IN BOX).
Buy It Now
$3.20 Shipping Condition: Neu Location: China Direct display of hardness scales HRB, HRC, HV, HB, HS, HL. Workpieces of special materials need to be equipped with other types of probes. Hardness Scale:HL,HB,HRB,HRC,HRA,HV,HS. ... moreThe three needle thread of the sensor has two colors of yellow and gray.
Buy It Now
$3.00 Shipping Condition: New Location: 福田区, China Accurate rms to DC conversion (50 MHz to 9 GHz). Single-ended input dynamic range: 65 dB. Transfer function ripple:
Buy It Now
$18.59 Shipping Condition: Used Location: Asbury Park, United States 3.56 x 10-8 Helium. Dupont 141430-8. 78°C, Standard Leak. 1.32 x 10-8 Air Rates.
Buy It Now
$40.00 Shipping Condition: New Location: China BENCHTOP CONDUCTIVITY METER 12DW AUTOMATIC CALIBRATION: The meters is capable of calibrating up to 5 points using standard solution. From Setup Menu. ... moreChoose CAL(Calibration) and press key to set known conductivity value, immerse conductivity electrode into calibration solution, press ENTER key and meter is automatically calibrated. CONDUCTIVITY AUTO-RANGING: It has auto-range function for measuring conductivity. Upon immersing conductivity sensor into sample solution. The screen immediately displays the value in appropriate measurement range for accuracy. AUTOMATIC TEMPERATURE COMPENSATION: Using the supplied temperature probe. The temperature value is displayed on the screen. The meter automatically compensates for optimum accuracy under variable temperature conditions. AUTOMATIC TEMPERATURE COMPENSATION: Using the supplied temperature probe. The temperature value is displayed on the screen. The meter automatically compensates for optimum accuracy under variable ADJUSTABLE TEMPERATURE COEFFICIENT AND CELL CONSTANT: Various Ions may have different temperature coefficients. The meters can set the temperature coefficient between 0 and 3.9% in degrees centigrade for optimum accuracy. Set three cell constants(0.1, 1 and 10) for measuring requirements. FLUID RESISTANT HOUSING AND SWIVEL ELECTRODE HOLDER: The integrated plastic housing and keypad is sealed to protect against accidental spills and splashes. The electrode holder arm is rapidly switched to both sides and swivels and articulates for convenient use and positioning. Specification: Conductivity Range: 0~1.999. 19.99, 199.9, 1999uS/cm, 19.99, 199.9mS/cm Conductivity Accuracy: ±1% F.S Temperature Range: 0~100.0 o C Temperature Accuracy： ±1 o C libration Points： 1 point per range Temperature Compensation： 0~50 o C. Automatic, Manual Temperature Coefficient： 0~3.9% per o C Cell Constant： K=0.1. 1, 10(Adjustable) Power Requirements： DC9V. Using AC adapters. 220VAC, 50Hz, 110V/60HZ Display： LCD Dimensions： 210(L)×205(W)×65(H)mm G.W. 1.7kgs METER
Buy It Now
$90.00 Shipping Condition: Used Location: South Korea 24 VDC bias with TTL logic.
Buy It Now
$6.00 Shipping Condition: Used Location: East Tawas, United States Linear taper. Quantity and Values.
Buy It Now
$2.78 Shipping Condition: Neu Location: China The module has high power output and efficiency (up to 96%). The output can be up to 65W (and can further reach 100W when enhance heat-transfer). Step ... moredown module. Step up module. Adapter Module. Display module.
Buy It Now
$3.00 Shipping Condition: New Location: Harrisburg, United States Operation (Single Shot) At the end of the delay, the output de-energizes. Fixed or adjustable delays from 0.05 - 600s in 4 ranges. The TSS is a totally ... moresolid-state timing module. The TSS can be surface mounted with a single screw or snapped on a 35mm DIN rail using the P1023-20 accessory adaptor.
Buy It Now
$4.00 Shipping Condition: New Location: China We will reply you within 24 hours asap.
Buy It Now
Free Shipping Condition: New Location: Japan ●10MHz option can be expanded to 2 outputs/4 outputs/7 outputs. ●Extension output can be selected from 50Ω or 75Ω. ●Selectable output level options (-10dBm/+7dBm/Standard: ... more+13.5dBm).
Buy It Now
$26.90 Shipping Condition: New Location: China Smart appearance with the backlight, auto-shutdown features, the wide range of optical power testing, test the accuracy of precision as well as a common ... moreinterface design. Detector: InGaAs. It can work at 1625nm, 1550nm, 1490nm, 1310nm, 1300nm, 850nm, 650nm, single wavelenght, dual-wavelength or tri-wavelength.
Buy It Now
$90.00 Shipping Condition: Used Location: South Korea ebay template The Following Items Are Included: Fluke FOS Multimode Source(BC# 4668A) 850nm 1300nm BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! Fluke ... moreFOS Multimode 850nm/ 1300nm Fiber Optic Source Fluke FOS Multimode Source- 850nm- 1300nm Working Condition: Excellent Condition: Refurbished Warranty: 90 Day Exchange Warranty The FOS-850/1300 Fiber Optic Source provides light for multimode testing at 850 nm and 1300 nm. It features a slide switch to select output and one ST connector for each output. Includes meter with 9-V battery installed. ST adapter cap with dust cap, source with 9-V battery and dust cap installed, two ST/ST 3-foot 62.5-µm multimode patch cords, ST/ST 1-foot 62.5-µm multimode test jumper, ST/ST adapter(singlemode quality) two recording pads, hard-shell carrying case and user's guide. The optional NF40"Fiber Optic Reference Guide" provides full in-depth fiber information. This 8.6-ounce kit measures 3.2" x 5.8" x 1.5" Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's. Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support& service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory. Sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools. Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing f
Buy It Now
$2.78 Shipping Condition: Neu Location: China Step down module. Step up module. Adapter Module. Display module. Wireless module. Receiver&Transmitter. LM2596S4-digit Digital Tube Display. Breadboard ... moreCable and Prototype.
Buy It Now
$4.95 Shipping Condition: New Location: Morris, United States BEING OFFERED HERE IS THIS SARKES TARZIAN M-500 SILICON RECTIFIER KIT WHICH WAS PART OF A LOT OF ELECTRONIC EQUIPMENT PURCHASED AT A HAM OPERATOR'S ... moreESTATE SALE. IT APPEARS TO BE COMPLETE AND HAS BEEN IN STORAGE A VERY LONG TIME. PLEASE SEE THE PICTURES. AND THANK YOU FOR LOOKING.
Buy It Now
$8.50 Shipping Condition: Used Location: Trenton, United States FREE local pickup is available on most orders at our NJ 08620 facility. Custom Fit for Your Needs & Budget.
Buy It Now
Free Shipping Condition: New Location: China 1 Range: 1mW～6W. The upper computer just send the command ?. Other commands can refer to the attached file.
Buy It Now
Free Shipping Condition: New Location: China Rubber blanket, cardboard, printed circuit board, etc. Test types: paper, plastic sheet, transparent material, aluminum foil paper. The angle between ... morethe parallelism of the lines shall not exceed 3 degrees.
Buy It Now
Free Shipping Condition: Used Location: Austell, United States
Buy It Now
Free Shipping Condition: New Location: Staten Island, United States Manufacturer : NOYITO. Input pulse level is 5V,12V,24V can be directly input, no need to string resistance. But the input signal frequency, to maintain ... moremore than 0.5 seconds. The output current is 5mA.
Buy It Now
$3.59 Shipping Condition: New Location: China Currently, there are two models of LM35 can provide use. LM35DZ output is 0 ℃ ~ 100 ℃. The probe uses new imported LM35DZ temperature sensor chip, the ... morechip were used for each pin shrink tube separated to prevent short circuit, internal sealant, waterproof!
Buy It Now
$23.85 Shipping Condition: Used Location: Simi Valley, United States SILO attempts to be as accurate as possible. The sale is final.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Short press U / I button again to switch to set constant current value. It can be seen that a certain bit of the constant current value is blinking. Turn ... morethe encoder knob to increase or decrease the value.
Buy It Now
$13.60 Shipping Condition: Used Location: Laurel, United States Equipped with HACR, HID rated circuit breaker with D Breaking capacity code. Provide short-circuit and overload protection. Mounting bolts are used to ... morehold these breakers in place. Many accessories are available for this breaker.
Buy It Now
Free Shipping Condition: New Location: China In addition, the internal is a fixed load. For example, the current of 3.2V can only be less than 3A. The channels are irrelevant! It is strictly prohibited ... moreto collide and invert. (Detailed introduction in the manual).
Buy It Now
Free Shipping Condition: New Location: Brooklyn, United States Features: 1. Work current:4mA~58mA(at 24V) 8. Load(Max):DC30V/30A or AC250V/30A 10. Work Temperature:-25℃~85℃ 11. Work Humidity:5%~95%RH 12. Size:78 53 ... more30mm Application: 1. Electric bicycle 6. If you did not receive our reply.
Buy It Now
$2.99 Shipping Condition: New Location: China Detection range: DC current between 0~10A. Detection accuracy: 0.01A (10ma). Simple operation and wide application range. Standby current: about 20ma. ... moreGood performance and long service life. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Buy It Now
Free Shipping Condition: New Location: China ORP is the abbreviation of oxidation-reduction Potential in English, that is, redox potential. MV value in ORP standard solution: 222 + 15mV (25 C). Test ... morein ORP standard solution BNC Interface ORP Electrode.
Buy It Now
$180.00 Shipping Condition: Used Location: South Korea ENDEVCO MODEL 136 DC Differential Voltage Amplifier. Excellent condition. 2 units are available. Buy it with confidence
Buy It Now
Free Shipping Condition: Used Location: China Your request will be replied within 12 hours.
Buy It Now
$11.60 Shipping Condition: Used Location: Kingman, United States Lot of 4 Tested C1-3D-PC240X25 Solid State Relays SSD Input 32VDC Output 530VAC. -Coil: 32VDC. So this shows what I get, and what you get may be slightly ... moredifferent. Use the zoom function and have a good look.
Buy It Now
Free Shipping Condition: New Location: Chula Vista, United States 3 Mil-Spec Precision (only 0.1%!). Wire Wound 350 Ohm 3W Resistor # RWR89S3500BS. Wire Wound Fixed Resistor Part # RWR89S3500BS. RWR89S3500BS ISC: B. ... moreRESISTOR,FIXED,WIRE WOUND,INDUCT. These high-end, mil-spec (mil-spec classification is displayed below) resistors can dissipate up to 3 watts with no chance of failure or performance degradation.
Buy It Now
$1000.00 Shipping Condition: Used Location: Japan NF Corp / HSA4014. The warranty does not cover the following cases.
Buy It Now
$3.20 Shipping Condition: Neu Location: China 0:±10V 1:±5V 2:0-10V 3:2-10V 4:0-5V 5:1-5V 6:0-3.3V 7:0-2.5V 8:0-1V 9:-10V-0V. 0:0-20mA 1:4-20mA 2:0-22mA. range : -10V to 10V You can set as many values ... moreas there are points. Current signal output. Current passive mode 24V + input.
Buy It Now
$3.20 Shipping Condition: Neu Location: China ET44 series（ET4401 ）Desktop Bridge LCR. Nano Sheild. Display: 3.5” TFT LCD, resolution 480 320. Am 29.06.2022 hat der Verkäufer die folgenden Angaben ... morehinzugefügt hope you could understand. Test level 100mV ～ 2000 mV.
Buy It Now
Free Shipping Condition: New Location: China The Open429I-C supports further expansion with various optional accessory boards for specific application. Capacitive touch panel interface: for connecting ... morecapacitive touch panel. USB type A receptacle to mini-B plug cable x 1.
Buy It Now
$26.53 Shipping Condition: Used Location: Canton, United States It is compatible with the models listed below. This is being sold as shown and described above. defective on arrival.
Buy It Now
Free Shipping Condition: New Location: Jonestown, United States Local pick up is not available. We do not accept P.O. BOXES. Photos are greatly appreciated! If your item appears defective, a call to the manufacturer ... moremay solve your issue.
Buy It Now
Free Shipping Condition: New Location: Austell, United States SquareTrade © AP6.0 TECUMSEH COMPRESSOR Start Relay TECUMSEH PRODUCTS Compressor Start Relay Part# K71-10 For the following 1/3 HP Tecumseh Compressor; ... moreAEA4440YXA 115 V Start Relay
Buy It Now
$3.50 Shipping Condition: New Location: China The reset signal is also used as the counting signal of the sub-counter, and the sub-counter will be increased by 1 for every full 60 seconds. When the ... morecounter is full 24, the Q0-Q3 of the ten bits will be 0010 and that of the individual bits will be 0100, which will be connected to the counter after Q2 is done with the algorithm, so that the counter can be reset from 6 to 0 in advance.
Buy It Now
Free Shipping Condition: New – Open box Location: United States W58XEIC4B-20 Circuit Breaker. W58 Series 20a, 250vac, 50vdc. Kohler Generator circuit breaker number 238489. Fits most Generators. Wire connections may ... moreneed modification.
Buy It Now
$2.89 Shipping Condition: New Location: China Features：Waterproof, dustproof, oxidation resistant and more durable. Pin Number: 1/2/3/4/5/6.
Buy It Now
$162.24 Shipping Condition: For parts or not working Location: Moxee, United States Los Alamos Scientific Laboratory plaque still attached. Great display piece or collectors piece. We may have it in inventory that hasn’t been added yet. ... moreUsed, does not powers up, will be sold as is for part or repair.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Note:if You Want to Convert 220 Volts to 110 Volts, the Load Power Do Not Exceed 50% of the Machine Calibration Capacity. Note：For safety, it’s recommended ... moreby the manufacturer that the voltage transformer’s maximum power should be equal or greater than the power rating of your appliance multiplied by 2.5. For example, if you have an appliance rated at 100 watts, you will need to pick a transformer with a maximum power of 250 watts or greater. The power of our transformer must be 2.5 times larger than the buyer's appliance to be used normally. Maximum Power Capacity1500w Dimensions34*22.5*21.5cm Rated Current14-15a G.w10kg To Convert 110 Volts to 220 Volts: Make Sure the Appliance to Be Plugged in Uses Fewer Watts than the Transformer's Rating. Insert the Voltage Tap Plug (Lo.
Buy It Now
$200.00 Shipping Condition: New Location: Jonestown, United States Local pick up is not available. We do not accept P.O. BOXES. Photos are greatly appreciated! If your item appears defective, a call to the manufacturer ... moremay solve your issue.
Buy It Now
Free Shipping Condition: New Location: United States Waterproof Male Female 3/4/5/6-Pin Way Seal Car Electrical Wire Connector Plug. 72 Pcs AGC Auto Glass Fuse 0.5A to 30A ( 6mm X 30mm) Kit (9)Assorted Sizes ... moreW/Box. 140PCS 22-16/16-14/12-10 AWG Semi-Insulated Piggy Back Spade Quick Splice.
Buy It Now
$14.78 Shipping Condition: Used Location: Trenton, United States Unit status The below information can expedite or otherwise assist your buying process. Custom Fit for Your Needs & Budget.
Buy It Now
$3.00 Shipping Condition: New Location: China 5A Step Down XL4015. When you use the product, the module inputs and outputs to be isolated from ground！. 9、Input reverse polarity protection: None (if ... morerequired, high current diode in series with the input).
Buy It Now
$2.88 Shipping Condition: New Location: China Module highlights: 5A high power、high efficiency and low ripple with power indicator ! The DC-DC module based on LM2596 advocate current to 3.0A, but ... moreonly to 1.8A.However, being introduced module adds a heatsink, using high-power devices.This module can easily reach 4A, 50W, add heat sink circumstances can reach 75W, has a high price!
Buy It Now
$3.20 Shipping Condition: Neu Location: China Oscilloscope specifications. Bandwidth: 1M. 1 x Oscilloscope. It is also equipped with a multi-function signal generator (10KHz). Waveforms: sine wave, ... morerectangular wave, sawtooth wave, half wave, full wave, positive step wave, anti-step wave, noise wave, exponential rise, exponential fall, DC signals, multi-audio, Sink pulse, Lorentz wave.
Buy It Now
Free Shipping Condition: New Location: United States The GE Q-Line 30 Amp 1/2 in. Single-Pole Circuit Breaker has a case made of heat-resistant thermoset for stability and structural integrity. Suitable ... morefor use in GE load centers that accept THQP circuit breakers.
Buy It Now
$3.00 Shipping Condition: New Location: China CC LED:Red Constant current output indicator.It enters the constant current state when the load current reaches the set current and CC constant current ... moreindicator turns ON. Output Power:15W(Max). Over-Power Protection:Module will turn OFF output automatically if output power is more then 15W.
Buy It Now
$3.74 Shipping Condition: Neu Location: China The INA226 is a current shunt and power monitor with an I2C™ or SMBUS compatible interface. ALERT:Multi-function alarm output. 1x Module(Pin Soldered ... moreOr Not Soldered). Bi-directional correspondence → current can be detected from both high and low end.
Buy It Now
$160.33 Shipping Condition: Gebraucht Location: Hungary Vintage glorious incomplete and untested Artificial ear with condenser cartridge. In original wooden box and housing. Calibration manual for cartridge ... moreincluded Model 4152 serial number147345 Model 4132 serial number156958 Ready for bids on this Copenhagen deluxe
Buy It Now
Free Shipping Condition: New – Open box Location: Austell, United States CIK Asset Recovery.
Buy It Now
$19.03 Shipping Condition: New – Open box Location: Canada
|
|
|
|
TRANSMATION 1060 PPS MINITEMP CALIBRATOR VERY CLEAN AND WORKS WELL NICE CASE
A very nice. Working, clean Transmation 1060 thermocouple calibrator. Battery compartment very clean. Good case. Zipper works easily, with carrying strap. Wire clamps turn easily and lock tight. Manual not included. No cables or thermocouples included. Battery not included. Can't be shipped with a battery. As you can see. I checked it with a type J thermocouple and it is accurate. Last calibration seal still intact. Fully functioning. Clean unit.
|
|
|
Rare Heathkit HRA-10-1 Xtal Calibrator With HRA-10-1 Power Supply!!
I have the Heathkit HRA-10-1 Xtal Calibrator With HRA-10-1 Power Supply. I have not seen this power supply before. This is a working unit and comes with the original manual as well. High bidder to pay $10.74 shipping in the US.
|
|
|
FasTest 410A Electronic Calibrator by Loveland Controls
Up for auction is a Loveland controls 410A electronic calibrator. It is good. Used condition and comes with a very nice padded transit case. It has a new 12 volt 2.9Ah sealed lead acid battery and has been tested for operation, ie, the voltmeter and sourcing functions seem normal. No instructions or accessories are available. no further testing was done. Original battery charger was not available but I have included a small wall wart charger that is rated at 14 Volts DC@ 340 mA. the cable is terminated with aligator clips and a suitable dc jack will need to be added so that it will interface with the external power dc jack. Need to check to make sure that is the proper voltage. I suspect that it takes 14 volts and there is mostlikely a reverse polarity diode in series with the jack paypal please no international shipping
|
|
|
EG&G PICO-CALIBRATOR MODEL TF601 - SOLD AS IS
EG&G PICO-CALIBRATOR MODEL TF601- SOLD AS IS This is a fixed auction for a EG&G Pico-Calibrator. Model: TF601 Item specifications: Brand EG&G Model TF601 Requires DC Power Unable to test SOLD AS IS This unit is exactly as pictured. The shipping costs we list in our description are for the 48 contiguous USA states only. Shipping will be recalculated for buyers in Hawaii. Alaska or outside the United States once we have received your shipping address. Buyers are responsible for their Country's custom fees. We always combine shipping to give you the lowest possible cost. We have competitive rates for our always welcomed international bidders. We pride ourselves on our customer service. And we want to make this eBay transaction as smooth as possible. Please feel free to call us between 9:00-5:00 EST Monday-Friday at 800 826 3433 ... moreif you have any questions.
|
|
|
AMETEK AUDIO DOSIMETER CALIBRATOR UNIT AC-1
Buyer agrees to pay $22 AMETEK AUDIO DOSIMETER CALIBRATOR UNIT AC-1*THIS ITEM IS USED. TESTED AND WORKING. THIS IS FOR 1 UNIT. 5 AVAILABLE. ACCEPTS A 1/2" MIC FROM UNITS SUCH AS THE MK-2. MK-3. Buyer agrees to pay $6.50 shipping& handling continental USA. Excludes AK/HI/PR. Payment is preferred by, Payment must be made within 4 days. INTERNATIONAL BIDDERS PLEASE BE AWARE WE DO NOT SHIP FIRST CLASS OR FLAT RATE OUTSIDE THE USA. NO EXCEPTIONS* IF YOU SHOULD HAPPEN TO HAVE ANY ISSUE WITH YOUR ITEM ONCE RECEIVED PLEASE CONTACT ME FIRST SO I CAN TRY AND RESOLVE ANY PROBLEM FIRST HAND THANK YOU. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-148fe30f5e9-0x115-
|
|
|
Larson Davis Acoustic Calibrator for Sound Level Meter or Dosimeter CA250-0416
Larson Davis Laboratories s/n ca250-0416 114.odB 250Hz Good condition ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-148fe34fbaf-0x108-
|
|
|
Capintec CRC 15W dose calibrator with well counter
This device was used for less than 10 experiments. In Like New condition. I will deliver in the SF bay area.
|
|
|
KENDALL TYCO FIRST TEMP GENIUS 3000-PC CALIBRATOR #X73
RECEIVED AS SURPLUS Manufacturer: KENDALL MODEL# 3000-PC POWERS UP-I ONLY HAVE WHAT IS PICTURED-IF YOU WOULD LIKE MORE PICTURES OR WOULD LIKE ME TO TRY SOMETHING ON THE UNIT PLEASE LET ME KNOW UNABLE TO TEST-SOLD AS IS
|
|
|
Tentec Triton IV Triton Calibrator Module 80308
TenTec Triton IV Calibrator Module 80308. From working unit. No warrantee due to age but works and will not be DOA.
|
|
|
MSA ULTIMA CALIBRATOR KIT #40 ALL COMBUSTIBLE GASES *NO RESERVE* NICE KIT
YOU ARE BIDDING ON A MSA# 40 CALIBRATION KIT IN VERY GOOD CONDITION. THIS KIT IS CALIBRATING THE ULTIMA GAS MONOITOR SPAN GAS VALUES. THE SHIPPING FOR THIS ITEM IS $16.99 AND WILL INCLUDE INSURANCE FOR THE LOWER 48 STATES. THIS IS A 3 DAY NO RESEVRE AUCTION WITH A SUPER LOW STARTING BID SO GOOD LUCK! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Bruel Kjaer 4230 Sound Level Calibrator, w/ manual, case & 1/2" adaptor, Mint
For your consideration is a Bruel& Kjaer 4230 sound level calibrator. It is in perfect working order. Was taken well care of and has no engraving or damage of any kind. Comes with its original factory manual, case and adaptor for 1/2" microphones. Will be packed carefully and will be shipped within 2 days of receiving payment. Note: I ship to confirmed addresses only
|
|
|
Xerox Docucolor 700i Color Press With Fiery EX700 and Color Calibrator
Xerox 700i Digital Color Press with Fiery EX700 Maximum paper size: 13 x 19 in. Resolution: 2400 x 2400 dpi Duplex Automatic Document Feeder with 2 sided output up to 300GSM Single Large Capacity Tray with Standard Catch Tray EFI Fiery User& Administration Documentation EFI Fiery System Recovery Software Fiery Color Calibration Kit(Color Units Only) includes EFI ES-1000 Color Calibrator This is a very clean machine. Low meter. Great working condition. Runs great! Local pickup is best. Can arrange for shipping outside of local area at extra charge. Buyer is responsible for all costs associated with packing and shipping.
|
|
|
Vermont Ski Release Calibrater - Alpine Ski Release Calibrator with vice clamp
VERMONT SKI RELEASE CALIBRATER You are bidding on a Vermont Ski Release Calibrator manufactured by the Vermont Ski Safety Equipment Company. This calibrator was purchased from a local sporting goods/ski shop that is going out of business. This calibrator was used until this past season when the decision was made to close their doors. I believe this calibrator was manufactured sometime between 1989 and 1991. The calibrator is a mechanical device designed to measure the release torque of Alpine Ski/Boot/Binding systems. It can be used to determine forward and backward lean releases as well as twist releases. The following items are included in this sale: VRAU-9 MECHANICAL ARM. UNIVERSAL– Arm is in good shape and appears to be functioning properly. The arm provides torque readings for forward. Backward, and twist type releases. Original MSRP ... moreof the arm was $290. Today. A new universal arm costs $750. VRCB-9 Built-To-Tilt Ski Vice- The Tilt Vise supports the ski for twist tests and tilts to secure the ski at a convenient angle for forward lean tests. The vise can also be used to hold the ski during binding installation and repairs. The Vermont Ski Safety Equipment company offers a service that will upgrade the vise to be wide enough for fat and carving skis. And long enough for most all templates. Although if you are mechanically inclined, I believe you could complete this modification. The vice has been heavily used but appears to be functioning properly. The original rubber components on the clamps are heavily worn but I have purchased new threaded pieces with rubber ends from Destaco. I will include these two new pieces. Original MSRP for the vice was $415. Today, a new XX Wide tilt vice costs $2825. VTD-1 TORQUE LIMITING SCREW DRIVER- The Torque Limiting Screwdriver(TLS) is preset at the factory to approximately 3 Nm. Original MSRP was $80. Today. This item costs $375. I believe this device needs sent back to VSSE for repair/calibration. VSL-9 STANDARD LEG– The standard leg is in good shape and appears to b
|
|
|
AR Eaton 533X-11M Variable Repetition Rate Impulse Signal Generator Calibrator
AR Eaton 533X-11M Variable Repetition Rate Impulse Signal Generator Calibrator Mouse over images to see larger version Click to view supersize image Eaton Impulse Generator Description: 1 Used AR Eaton 533X-11M Variable Repetition Rate Impulse Signal Generator Calibrator. Power Cord Included. Details: The 533X-11M variable repetition rate impulse generator(VRRIG) is a calibrated broadband signal source primarily intended for use as a calibrator when performing substitution type interference measurements. The availability of various operating modes provides versatility. The 533X- 11M is completely solid state. And applications include: calibrated broadband signal source, calibration for substitution-type broadband interface measurements, receiver bandwidth measurement, and rapid gain checking of tuners. See More Product Detail and Specifications ... moreCondition: Pulled from Working Environment. Powers On. No further testing done. Some units may have cosmetic damage(light scrapes and/or scuffs) cosmetic damage will not interfere with unit. We have many of these units in stock so you may not receive the exact item pictured. But all power on. 14 Day DOA Warranty. Location ID: Alex-ShippingFloor ALEX. Payment: Preferred mode of Payment is PayPal. Cashier’s Check and Personal Check are all accepted modes of Payment. Please contact us if these are needed to submit payment. Shipping: Purchases will be shipped via FEDEX or USPS. Please note the EBay Listing shows UPS shipping but FEDEX is our preferred carrier. We guarantee to ship your item within 48 hours(except weekend and public holidays) after payment has cleared. This guarantee does not include items that require freight shipping. Your Tracking number will be sent to you via email once the item has been shipped out. Never accept a damaged package! Instead reject the package and contact us ASAP. International Sales: USPS Express Mail International is our preferred shipping method. All import duties& taxes are responsibility of the buyer. We do offer FedEx Air Fr
|
|
|
LARSON DAVIS SPARK NOISE DOSIMETERS W/2 Precision Acoustic Calibrator CAL 150
PLEASE CAREFULLY READ TERMS 1&2 BELOW. PLEASE DO NOT BID IF YOU CANNOT COMPLY WITH TERMS. LARSON DAVIS SPARK NOISE DOSIMETERS W/2 Precision Acoustic Calibrator CAL 150 5 Dosimeters- 4 have cables and 1 has an antenna 3- 703+ 1- 706 1- 706RC No batteries. Unable to test. May or may not function correctly; may have undiagnosed issues. Calibrators have 9V batteries. Unable to test. May or may not function correctly; may have undiagnosed issues. PLEASE READ CAREFULLY Thanks for looking at this auction! We are selling this item on behalf of a Department of Defense(DOD) contractor. Due to restrictions placed on us by the consignor. This auction does have stricter terms than our regular auctions and those terms are firm. Please read the following two terms carefully. And if you cannot comply with them please refrain from bidding on this item. ... moreThis auction is not open for International bidding/shipping- no exceptions. TERM 1 DECLARATION OF U.S. RESIDENCE By bidding on this auction I hereby declare that I am a lawful permanent resident of the United States. I also certify that my business affiliation. To include any corporation, business association, partnership, society, trust or any other entity, organization or group of which I am a participant is incorporated in the United States or otherwise under the jurisdiction of the U.S. Laws. Lawful permanent resident for purposes of this instruction. means the status of having been lawfully accorded the privilege of residing permanently in the United States as an immigrant in accordance with the immigration laws. Such status not having changed, 8 USC 1101(a)20) A lawful permanent resident also includes protected individuals defined as an individual who is a citizen or national of the United States, or is an alien who is lawfully admitted for permanent residence, is granted the status of an alien lawfully admitted for temporary residence, is admitted as a refugee, or is granted asylum. 8 USC 1324b(a)3. TERM 2 VALIDITY/WARRANTIES THIS PRODUCT IS SOLD AS-IS. W
|
|
|
Precision Linier Calibrator Measuring Tool
This precision measuring tool is made of hardened stainless steel. Included: Instruction pamphlet and a blue hard plastic case with foam fitted insert. Excellent condition.
|
|
|
FLUKE 744 DOCUMENTING PROCESS CALIBRATOR METER CALIBRATED AND READY TO GO
FLUKE 744 DOCUMENTING PROCESS CALIBRATOR METER CALIBRATED AND READY TO GO Up for sale is a used but in great working condition Fluke 744 Documenting Process Calibrator. These are pictures of the actual item up for sale. I had it calibrated and inspected before posting on ebay. Comes with case. 1 battery, charger and all the leads you see in the pictures. Free shipping to anywhere in the lower 48 states only. I will only ship to a Paypal confirmed address. Alaska and Hawaii please email me for a shipping qoute. Please review me feedback and bi d with confidence I will only ship to a confirmed address. I accept Paypal for safe and secure payment. Please feel free to email me with any questions or concerns. Thank you very much for looking please click below to view my other qaulity tools. A confirmed address is your credit card billing address.NO ... morelocal pickup available. There is a 3 day inspection period if not satisfied return for a full refund. We do not pay for repairs or parts we just offer a full refund. Thank you Please Read Carefully We do not pay for parts of repairs. If you have a problem with an item please contact us. You have a 3 day inspection period if not happy simply send back for a full refund
|
|
|
Druck; DBC150 Temperature Calibrator【USED】 A-＃5
Druck; DBC150 Temperature Calibrator【USED/ Not Tested】 Ex-works Nagasaki Japan as is. Where is. http:www.post.japanpost.jp/int/charge/list/ems_all_en.html
|
|
|
ECOTECH GasCal 1000 Gas Dilution Calibrator
Here for sale i have an ECOTECH GasCal 1000 Gas Dilution System. This device is used for creating custom concentrations of gas from a higher range of gas. This unit was serviced on 8/28/2014 by American ECOTECH. The unit comes with the latest software. Power cable, data cable and calibration report. Feel free to contact me with any questions. I have 3 of these units in total if interested in more than 1 please contact me for a package deal. Thanks for looking.
|
|
|
Sound Level A-Weighted Type 453A-1 Sound Level Meter Acoustic Calibrator Scott
You are viewing a Sound Level A-Weighted Type 453A-1 Sound Level Meter Acoustic Calibrator Scott Instrument. Appears to be in wonderful condition. This belonged to a deceased friend and I am selling this for his widow. Get a bargain here…
|
|
|
Heise PTE-1 w/ HQS-RTI HQS-XS PTE1 Handheld Dual Display Digital Calibrator
Heise PTE-1 w/ HQS-RTI HQS-XS PTE1 Handheld Dual Display Digital Calibrator Used unit in great condition. There is one very tiny hole in the screen cover. It is so small that it is hard to see in the main pic. See top left corner) Comes as pictured. Model: PTE-1 PLEASE READ BELOW BEFORE YOU PURCHASE We do not use stock pictures in our listings. You are purchasing ONLY what you see pictured. Nothing more, nothing less. We welcome international bidders. Please e-mail for shipping quote before bidding or purchasing. We do our best to ensure customer satisfaction with all of our transactions and conduct our business with the highest integrity. If a problem arises with your transaction. Please give us the opportunity to rectify the situation BEFORE leaving negative or neutral feedback. E-Bay judges sellers heavily on the DSR Rating System. If ... moreyou do not feel justified to leave 4 or 5 stars in EVERY category. Please let us know first so that we can fix the problem. Payment: We accept PayPal only. We do charge Florida sales tax. State taxes will be calculated at checkout. Shipping: Our normal shipping days are Monday– Thursday. We only ship to the verified address given in PayPal payment. Please make sure payment address in PayPal is correct. If you wish to have your item shipped to a different address you will need to first change your address in PayPal before purchasing. Customer Service: Our customer support is available 8:30AM- 4:30PM Monday- Friday CST. Please contact us thru eBay messages. Please note that you will not receive a response after business hours or over the weekend. Thank you so much for your purchase! We appreciate your business! gsrx_vers_586(GS 6.8(586) Di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14914df57a9-0x114-
|
|
|
Two Piece Lot Targas Equipment Bags (Beta Calibrator 320 Pressure Calibrator)
Two Piece Lot Targas Equipment Bags(Beta Calibrator 320 Pressure Calibrator) Description: Up for auction is a Two Piece Lot of Targas Equipment Bags(Beta Calibrator 320 Pressure Calibrator) in great shape that have good zippers and are overall in excellent condition. One is made of leather and one is made of canvas. Both have the books in them but these are my spare bags and I do not need books or bags! Get a great deal here! This auction is for my spare bags only. Thanks for looking! Message me your zip code for a shipping quote! Call me with any questions at(727) 365-3899
|
|
|
Transmation PPS mini Temp 1064P Thermocouple Calibrator with Carry Case
Transmation PPS mini Temp 1064P Thermocouple Calibrator with Carry Case Description: Up for auction is a Transmation PPS mini Temp 1064P Thermocouple Calibrator with Carry Case that is in good working condition that shows some minor signs of use but is in great condition. You can find all the pressure calibrator range and pressure information in this print out located here Message me your zip code for a shipping quote! Call me with any questions at(727) 365-3899
|
|
|
Vintage Eico Oscilloscope Voltage Calibrator, Model #495
We found this during clean-up after a relative's death. Unfortunately. I don't have any information about it or if it even works. The serial number is 2838, made by Electronic Instrument Co. Inc.
|
|
|
Hallicrafters SX-101A General Coverage Receiver - with Crystal Calibrator
Hallicrafters SX-101A General Coverage Receiver- with Crystal Calibrator. As you can see in the pictures. This radio is in great condition. I have not fully tested this unit myself, but I believe it to be in proper working order. It may require some tweaking, but I do not believe it will be DOA. The Hallicrafters SX-101A amateur band receiver tunes these ranges: 3.5-4. 7-7.3, 14-14.4, 21-21.5, 28-30 MHz and WWV at 10 MHz. The dial is also precalibrated for an external converter in the range of: 50-54 and 144-148 MHz. Features include: ¼" Headphone Jack, AVC ON/OFF, Calibrator 100 kHz, RF Gain, ANL, Mute Line, Antenna Trimmer, Notch, BFO, Speaker Terminals, Standby and Converter Input. The has speaker and antenna terminals and a converter jack. The cover is hinged. The circuit consists of: 6DX6 RF Amp. 6BY6 1st Mixer, 6BA6 1650 kHz ... moreIF Amp, 6BA6 2nd Mixer, 6DC6 50 kHz IF Amp, 6BY7 Detector/ANL/AVC, 6SC7 Audio Amp/BFO, 6SC7T Audio Out, 0A2 Voltage Regulator, 5Y3GT Rectifier, 12AT7 2nd Converter Osc, 6C4 50 kHz IF Amp and 6AU6 Crystal Calibrator. 105-125 VAC 50-60 Hz 75W. 20 x 10.5 x 16" 70 Lbs. Please look at the pictures& email any questions that you may have. If you need additional pictur es or some more information of any of these items please email me& I will be happy to help. This item will weigh(75) pounds& ship via UPS from U.S. zipcode 01440. Thank-you for looking and Happy Ebaying! ALL BUYERS If an item does not meet your expectations please contact me prior to leaving feedback so that I may address any issues that you may have. I make every effort to ship within 5 BUSINESS days of receiving payment. My shipping costs are based on the shipping weight of the item. Insurance and the cost of packaging. Please check the eBay shipping calculator for shipping costs BEFORE bidding and bid if you are comfortable with my shipping timeline and costs. Inside the US I use Fedex for items over 4 lbs and USPS Priority mail for items 4 lbs& under. All international shipments are by USPS Prio
|
|
|
Altek 820 Multifunction Process Calibrator Meter Excellent Condition Tech Chek
Pictures are of actual listing. Please contact me with any questions. This is a very lightly used calibrator that's in great shape. This calibrator is $2600 new from the factory. Here is your chance to get this great tool at a fraction of the cost. Has been tested and working as it should. TechChek Multifunction Process Calibrators Functions Like a Calibrator Milliamps. Voltage, RTD, T/C& Frequency. Measures Like a Multimeter Measure AC/DC Volts. Ohms& Continuity. Digital Accuracy with Analog Simplicity Speed sensitive digital pot for fast adjustment. Typical Accuracy to ±0.025% Accurate to 0.02 mA. V or Hz, 1¡C, 0.3 Ohms. Reads& Sources Standard Process Signals- C. F, mA, 4 to 20, V, mV, Ohms, Hz& CPM. Easy-to-Use Simple. Menu-less operation. User Settable Quik-Chek Switch Set any Span and Zero. Minimum& ... moreMaximum Tracking Instantly recall the highest& lowest measurements. Standard AA Alkaline Batteries Long battery life with quick battery changes. Altek 820 Shown Product Information, 161 KB Guide 6.6 MB PDF Help Lighten your load by taking the Altek 820 TechChek to every site. It's like bringing a cartload of test equipment from the shop to the control room or the field. The TechChek 820 sources& reads DC like a milliamp or voltage calibrator. Simulates and measures T/Cs& RTDs like a temperature calibrator and generates and counts frequency& Counts-Per-Minute like a frequency calibrator. Your TechChek can also help you trouble shoot like a multimeter! It checks continuity and measures AC line voltage without carrying a separate instrument. The TechChek 820 is easy to use. Select a function, choose a range, and turn the knob for the precise output you need. Plus, you can store three output values per range for instant recall with the QUIK-CHEK® switch. Use at every point in your 4 to 20 mA loop. You can Source& Read 0.00 to 24.00 mA. Simulate a Two-Wire Transmitter or the use the TechChek 820 to simultaneously Power& Measure your Two-Wire Transmitt
|
|
|
Honeywell / Zellweger Enforcer 2302B0650 IMPACT Portable Gas Monitor Calibrator
This unit is in great physical condition• Unit is in great working order• Email us with any questions-in most cases we will return your message within 30 minutes. Even on weekends and holidays! Auction includes exactly what you see pictured Good Luck Bidding! Check out more great deals on hard to find items at our eBay store
|
|
|
FOXBORO 8120-6 MAGNETIC FLOW CALIBRATOR TEST EQUIPMENT 118/236V-AC 1.5VA B327976
Product Specifications. Brand: Foxboro, Condition: Used, Model: 8120-6, Input Voltage: 118 V-AC. 236 V-AC, Output Power Rating: 1.5 VA, Type: Test Equipment Shipping Weight: 11 lbs, Shipping Dimensions: 9 x 11 x 7 in, SKU: B327976(SMM) Category: Electrical· Controls, Additional Notes: INSTRUMENT MAGNETIC FLOW CALIBRATOR, Product Photos. $395 USD- We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship items within 1 Business Day of receiving cleared payments. We can ship through express or overnight UPS service at buyer's expense. ... moreOur daily shipping cut-off is 3:00PM Eastern Time. We only offer Collect Shipping via UPS. If the item is to be shipped via Freight. Please contact us for a shipping quote. You may also choose to have your shipment picked up by your carrier. We will palletize, strap and shrink-wrap your shipment. We offer a 7 day courtesy holding period for our clients, but shipments are subject to storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence as we put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer an amazing buying experience to all our customers. All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition an
|
|
|
NEW Datacolor Spyder3 Pro Tv Color Calibrator S3 Tv100
Datacolor Spyder3Pro Designed for Serious& Professional Photographers or anyone whose display is the heart of their digital workflow will benefit from Spyder3 monitor calibration. 7-detector Color Engine Elegant Design Monitor calibration. With ambient light measurement Calibrate LCD. CRT& Laptop Displays Ambient Light Detector Custom Luminance Control SpyderProof Soft Proofing Cross-platform Compatibility
|
|
|
IMCO Load Cell Indicator/Calibrator
IMCO Load Cell Indicator/Calibrator Please refer closely to all the photos before purchasing. Used Appears in good shape however we do not have the means to test. No cables for power or load cell. We do not have all the pieces. Just the head. Unit is not marked with model number. Thanks for looking- we appreciate your business! Please Read: Other than what's displayed in the images accompanying this listing or mentioned in the description above. There are no manuals, instructions, additional parts or accessories. Shipping Information: Bidders outside the Continental U.S. including bidders in Alaska. Hawaii, Puerto Rico& our friends in Canada) MUST contact us to determine(non-freight) shiping costs! Any shipping prices or shipping calculators displayed in our ads are for continental U.S. addresses only. Alaska. Hawaii and all non-U.S. ... moreshipments will be sent through the U.S. Postal Service ONLY. If you live OR are requiring shipment outside the continental U.S. it is important to contact us for an individual shipping estimate. Be sure to do this before you purchase. FREIGHT SHIPMENTS: ARE THE RESPONSIBILITY OF THE BUYER TO ARRANGE AND PAY FOR OUTSIDE OF SALE. See item description and the Shipping FAQs link for details on our freight shipping policy. Buyer pays for shipping& insurance. And any additional packing/palleting/crating fees. The amount we charge for shipping. Whether given as a fixed rate or calculated after closing for the individual buyer, INCLUDES our costs in materials and packaging. We are a small company and make every effort to move our inventory along quickly. Your purchase is referred to our shipping department as soon as payment is cleared. And is prioritized on that basis. Payment Options: Payment through PayPal is preferred. MasterCard. VISA, American Express and Discover Card are all gladly accepted if carried in a U.S. financial institution. Contact us directly to pay with a credit card. Other Details: A 6% Idaho State Sales Tax is collected from customers who are Idaho residents
|
|
|
^^ GENERAL RADIO GENRAD SOUND LEVEL CALIBRATOR TYPE 1567
^^ GENERAL RADIO GENRAD SOUND LEVEL CALIBRATOR TYPE 1567 Description: Thank you for your interest! We are auctioning off this ^^ GENERAL RADIO GENRAD SOUND LEVEL CALIBRATOR TYPE 1567 Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. COMES AS SHOWN. Shows some cosmetic wear. USA CUSTOMERS- NO MEANS TO TEST. However will offer a 14 day guarantee to try it out fully with right of return. Simply contact us direct and we will give you instructions to return it. Please dont use the item not as described function since that now goes into our ratings for top seller starting in fall of 2014. INTERNATIONAL CUSTOMERS- NO MEANS TO TEST. And due to the cost to ship internationally and the distance items ... morehave to travel, ALL items shipped outside of the USA are SOLD AS IS WITH NO GUARANTEES. We love our international customers and would love to have your business but due to the nature of the used equipment, and that all items are untested and used, all sales are final. No refunds or returns, please bid accordingly! 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6. It is the bidder's res
|
|
|
Guth Labs 34C Breath Tester/Analyzer Simulator/Calibrator BAC
Up for auction is a Guth Labs 34C Breath Tester/Analyzer. Used as a Simulator or Calibrator BAC machines. It does power on. Most testing I am capable of doing. I have multiple quantities. If interested contact me
|
|
|
Hallicrafters SX-100 100KC Calibrator ON/OFF Switch Tested
Hi Folks. Offered here is a ON/OFF 100kc Calibrator Switch From a Hallicrafters SX-100 receiver. This comes with the factory wiring still attached at the proper length for installation. This has been tested and is in nice condition. Being sold as used, working and ready to install. Please check my feedback for past sales parts quality and service's provided. Questions and comments Always welcome. Thanks for taking time to check out my auction.73 Les. Payment: Most types of payment is accepted but not credit cards Shipping: We have 24hr shipping turnaround. All payments received by 5pm will ship the next Business day. Shipping for this item will be USPS First Class Rate with tracking inside the U.S unless otherwise requested by buyer. All out of country sales will be USPS International unless otherwise requested by buyer. There is a $5.00US ... morehandling charge for All out of country sales. International Buyers please check with me before bidding Returns: If you are not happy with your purchase just mail it back to me and upon undamaged return your money will be refunded including your return shipping cost. Returns accepted within 14 days of receipt.
|
|
|
CONDITION UNKNOWN! TRANSMATION DIGITAL CALIBRATOR SIGNAL INDICATOR 1045
GREETINGS& WELCOME TO AN AUCTION FROM HERMANMUSIC! ITEM: TRANSMATION DIGITAL CALIBRATOR and SIGNAL INDICATOR. Model 1045. CONDITION: Unknown. I am completely unfamiliar with this device. The included power adapter is not original but is rated at the required 10VAC. It appeared to charge the battery. But please note when the device was left idle for a couple of days the low battery warning appeared in the display. The device powers up as shown in the pictures. Beyond this. I cannot speculate or provide any guarantee of operation(or lack thereof) Please take a look at the pictures as they are part of this description. ACCESSORIES INCLUDED: Carrying Case(the initials"HH" are written near the top) 1 Set of Lead Wires(as pictured) 1 Power Adapter(not original. As shown) Instruction Manual- Thermocouple/RTD Tables- Note that the previous ... moreowner folded the literature to fit inside the case. TERMS OF SALE: Please ask any questions before you bid. Items are sold as described but otherwise as is. To avoid disappointment. This item should be considered a parts or repair unit as its operating condition is unknown and I know of no way to verify it. However. Beyond this, if you feel your item is not as described please email within 14 days after delivery and we will be very happy to work with you. Payment is accepted through PayPal and shipping is via USPS or FedEx(your choice) with tracking provided. Check our feedback and bid with confidence! 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-1492b6ec6f1-0x113-
|
|
|
GRAY INSTRUMENTS ABS 100 ohm RESISTANCE RESISTOR STANDARD CALIBRATOR
GRAY Instruments 100 ohm resistance standard Good used condition Sticker shows last calibration in 1990 I tested with Fluke 97 meter at 100 ohms exactly(showed 100.2 but my meter shows.2 with nothing attached) Sold guaranteed Please email questions Check out my other items!
|
|
|
Transmation Digital Calibrator & Signal Generator Model 1045 & Calibrator 1061
Transmation Digital Calibrator& Signal Generator Model 1045& Calibrator 1061 This is from an estate. These came in a estate buy out from the owner's widow. I had to purchase them to get a vintage military tube tester I wanted for my use. I put them in the Parts/Not Working category because I do not know condition and they have not been tested. They are untested. Not guaranteed, not warrranteed and sold completely AS IS. Nothing included except items in the pictures. They do not have the chargers for their batteries packs. There is an instruction set for the Model 1045 but nothing for the 1061. Soft case and test leads are included with each instrument. Please see all pictures. Larger pictures are at bottom of listing Shipping for this item is at a set price of $16.50 Priority with Tracking Confirmation. WE TRY TO CAREFULLY AND ... moreACCURATELY DESCRIBE THE ITEMS. EVERYTHING WE SELL IS SOLD AS IS SO PLEASE ASK QUESTIONS. REQUEST ADDITIONAL PICTURES. Please Check Your Paypal Address! This is the only address we can ship to per The Paypal Rulers. Ebay has decided to require payment mostly by Paypal which they own and charge sellers to use. We must accept only Ebay owned Paypal. We regret any inconvenience this may cause our bidders. Payment must be received WITHIN 5 CALENDAR days! We ship FAST! We always ship on Mondays and Wednesdays every week. We will also ship any other day we are near a post office. We mail at least twice per week. Auctions start and end on Sunday. Items paid for on Sunday and really early Monday get mailed Monday. Refunds on any item will not include return shipping costs. USA bids only. NO FOREIGN BIDS OR SHIPPING, None! BID ONLY if you are willing to PAY the amount you BID! Ebay charges me INSERTION fees even if high bidder does not pay. NON PAYING BIDDERS ARE ALWAYS REPORTED TO EBAY IN ORDER TO RECOVER EBAY'S COMMISSION COSTS! Your bid confirms agreement to these terms. dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-1492ca9d35b-0x10f-
|
|
|
HP 738BR Voltmetr Calibrator Manual
HP 738BR Voltmetr Calibrator Manual Hewlett Packard(HP) 738BR Voltmetr Calibrator Operating and service manual.HP Part No. 00738-90002 w/Manual Changes and Service Note. MANUAL DETAILS Issue/Revision/Date: Mar 1970 Manual applies to serial number prefix: 446. 503, 963 This manual contains schematics and a parts list. Binding details: Card cover(3 hole punched) Condition notes: Very good. Payment: PayPal. See shipping calculator. Man Ref No.8912
|
|
|
SWEEP CALIBRATOR -VACCUUM TUBE TYPE
UP FOR YOUR VIEWING PLEASURE IS A VINTAGE VACCUUM TUBE TYPE SWEEP CALIBRATOR. BEING SOLD UNTESTED DUE TO THE AGE.ALL THE TUBES LOOK TO BE IN TACK.THIS WILL BE SHIPPED WITH THE UTMOST OF CARE.THIS ITEM WEIGHS 30LBS. THIS WOULD BE A NICE ADDITION TO YOUR COLLECTION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT ME FIRST VIA THE EBAY MESSAGING SYSTEM BEFORE PLACING YOUR FEEDBACK SO THAT I CAN RESOLVE ANY PROBLEMS. PLEASE READ THE ENTIRE LISTING BEFORE PLACING BIDS… PLEASE CHECK ALL PICTURES BEFORE PLACING BIDS…AND IF YOU HAVE LESS THAN 10 POSITIVE FEEDBACKS PLEASE CONTACT ME BEFORE PLACING BIDS…OR IT WILL BE REMOVED. THIS ITEM IS BEING SOLD AS-IS TO THE HIGHEST BIDDER WITH NO RETURN UNLESS NOTED OTHERWISE.FEEDBACK WILL BE GIVEN WHEN PAYMENT FOR ITEMS IS RECEIVED. ALL ITEMS SOLD WILL RECEIVE A DELIVERY CONFORMATION NUMBER WHERE POSSIBLE.PLEASE ... moreASK QUESTIONS AND CHECK THE PICTURES BEFORE PLACING BID.ADDITIONAL PICTURES PROVIDED UPON REQUEST. PLEASE ASK QUESTIONS BEFORE PLACING YOUR BID. I WILL RESPOND WITHIN 24 HOURS. PAYEMENT MUST BE MADE WITHIN 5 DAY’S AFTER AUCTION ENDS UNLESS OTHER ARRANGMENTS ARE MADE.WINNERS WILL BE NOTIFIED BY E-MAIL AND INVOICE.INSURANCE WILL BE ADDED TO WINNING ITEMS OVER $100.00 USD. I ACCEPT PAYPAL OR CREDIT…ONLY…UNLESS YOU CONTACT ME FIRST…NO EXCEPTIONS… YOUR ITEM WILL BE SHIPPED AS SOON AS YOUR PAYMENT ARRIVES. INTERNATIONAL BIDDERS-ACCEPTABLE PAYMENT METHODS ARE PAYPAL ONLY…PLEASE CHECK THE AMOUNT OF SHIPPING BEFORE PLACING YOUR BID PLEASE CHECK OUT ALL MY AUCTION ITEMS HERE ONLINE AND AT TRAINMAN’S TREASURE CHEST
|
|
|
Jamar Hand Dynamometer Calibrator
This auction is for Jamar Hand Dynamometer The Jamar Hand Dynamometer is an important tool for physical and occupational therapists to track progress as it relates to grip strength for individuals with hand trauma and dysfunction. Ideal for clinical applications. The Jamar Hand Dynamometer's isometric design ensures accurate results and the durable construction provides years of reliable service. Shock-resistant rubber caps protect the heavy-duty stainless-steel measuring gauge protect the dynamometer from damage if dropped. With dual-scale displays for quick and accurate recording and virtually leak-proof hydraulics. The Jamar Hand Dynamometer is ideal for accurately testing dexterity and grip strength. Able to record isometric grip force from 0- 200 lbs with a peak-hold needle that automatically registers the extent of force until reset. ... moreEasily adjustable for up to five grip positions in half-inch increments for custom fittings to each user. Jamar Hand Dynamometer Specifications: Dimensions: 8" x 11" Weight: 3 lbs Calibrated up to 200lbs Adjustable for up to 5 different grip positions from 3/8" to 3 3/8" Includes protective carrying case and wrist strap
|
|
|
SHERWOOD DAVIS & GECK Genius Calibrator Model 3000-PC
you are bidding on a used working SHERWOOD DAVIS& GECK GENIUS CALIBRATOR MODEL 3000 PC. Come with what you see in photos only, note come with no top" only what you see in photos no extra, for oversea shipping please e-mail for shipping cost, good luck. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-149381b74cc-0x107-
|
|
|
F&J SPECIALTY DIGITAL AIR FLOW CALIBRATOR MODEL DL10 0.9-9.5CFM
F&J SPECIALTY DIGITAL AIR FLOW CALIBRATOR MODEL DL10 0.9-9.5CFM Description: Thank you for your interest! We are auctioning off this F&J SPECIALTY DIGITAL AIR FLOW CALIBRATOR MODEL DL10 0.9-9.5CFM. Acquired from government surplus. As you know with most government agencies. When a new grant comes in, they have to justify the grant by buying new equipment leaving very useful equipment for surplus. COMES AS SHOWN! Powers up! Some cosmetic wear. USA CUSTOMERS- NO MEANS TO TEST. However will offer a 14 day guarantee to try it out fully with right of return. Simply contact us direct and we will give you instructions to return it. Please dont use the item not as described function since that now goes into our ratings for top seller starting in fall of 2014. INTERNATIONAL CUSTOMERS- NO MEANS TO TEST. And due to the cost to ship internationally ... moreand the distance items have to travel, ALL items shipped outside of the USA are SOLD AS IS WITH NO GUARANTEES. We love our international customers and would love to have your business but due to the nature of the used equipment, and that all items are untested and used, all sales are final. No refunds or returns, please bid accordingly! 1. All equipment is sold-as-is. We are surplus equipment dealers and do not have the ability or knowledge to test equipment for functionality beyond plugging it in and describing what we observe as best we can. 2. All statements regarding products and their configurations are made to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. 3.We have no knowledge of the history of the equipment. Due to the nature of used and surplus equipment no guarantees or warranties either expressed or implied are offered unless specifically noted in the description. 4. NO REFUNDS OR RETURNS will be allowed. No exceptions unless offered in the description. 5. No manuals.NO STANDARD POWER CORDS, accessories, software etc are included unless pictured and noted in the description. 6
|
|
|
RFL INDUSTRIES AC/DC CALIBRATOR MODEL 829M - SOLD AS IS
RFL INDUSTRIES AC/DC CALIBRATOR MODEL 829M- SOLD AS IS This is a fixed auction for a RFL Industries AC/DC Calibrator. Model: 829M Item specifications: Brand RFL Industries Model 829M Output 0 to 1000V or 0 to 2 Amps or 0 to 10M ohms This unit was tested: Voltage& current output a few seconds and then goes into overload& turns off Output does not turn on above 19.999V SOLD AS IS This unit is exactly as pictured. The shipping costs we list in our description are for the 48 contiguous USA states only. Shipping will be recalculated for buyers in Hawaii. Alaska or outside the United States once we have received your shipping address. Buyers are responsible for their Country's custom fees. We always combine shipping to give you the lowest possible cost. We have competitive rates for our always welcomed international bidders. We pride ... moreourselves on our customer service. And we want to make this eBay transaction as smooth as possible. Please feel free to call us between 9:00-5:00 EST Monday-Friday at 800 826 3433 if you have any questions.
|
|
|
King Nutronics 3604A Digital 1200F Thermo Unit Temperature Calibrator FA62
King Nutronics 3604A Digital 1200F Thermo Unit Temperature Calibrator FA62 Product Website: http:www.kingnutronics.com/thermo_units_page.htm. Model No. 3603-A 3604-A 3605-A Range 100 to 600°F 100 to 1.200°F-40 to 250°F Accuracy ±0.5°F throughout range ±0.8°F from 100 to 600°F; ±0.15% of setpoint 600°F ±0.5°F throughout range Setpoint stability ±0.15°F ±0.15°F ±0.15°F Well uniformity ±0.3°F ±0.5°F ±0.5°F Heating/cooling element Heater coil Heater coil Peltier Adapter chuck composition Aluminum Nickel-plated copper Aluminum IEEE-488/GPIB interface No Yes Yes This unit is onsite. Is setup and we welcome for you to come inspect this unit. Please feel free to email with any questions that you may have. And I will do my best to ... moretry to help. Please give us a call at 860-242-4953 to discuss payment options. All duties and customs fees to paid by bidder. We do accept personal checks. Bank checks, company checks, and bank wire transfers. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. We do out best to ship quickly, but never at the expense of quality delivery. RETURN POLICY: This unit is being sold as-is. The auction description is written as a guide. We strongly recommened that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953, and we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid.
|
|
|
DPI 603 Pressure Calibrator shipping world wide
USED Druck DPI 603 Pressure Calibrator shipping world wide What you see in the picture is what you get This is a Druck DPI 603 Pressure Calibrator. It power up by Batteries but I am unable to fully test and so is sold as untested and for parts only and has no warranty so please bear this in mind. It comes with some batteries but I have no idea how much life is left in them. As is condition. No return! The cost effective DPI 603. Which extended the GE Druck range of rugged portable battery powered pressure calibrators, has standard ranges of-1 to +1 bar, 2 bar, 10 bar or 20 bar gauge with an accuracy of ±0.075% Designed for use in remote locations where a.c. power is not available. The DPI 603 enables pressure instrumentation to be serviced and calibrated. Shipping If you are outside of U.S.A please contact me before buying to quote you ... morethe shipping cost to your area Shipping about 25 business days with Economy mail We ship out all items within 3 business day after receiving payment. We are not responsible for any custom duty or import tax Important: I send to Honduras. Africa and Indonesia on buyers risk only Feedback If you are satisfied with your transaction with us. Please leave 5 star feedback and we will do the same for you! Before posting neutral or negative feedback PLEASE contact us so we can work it out. We will do everything we can! Thank You For Shopping
|
|
|
Bruel & Kjaer Sound Level Calibrator Type 4230 Instruction Manual
Bruel& Kjaer Sound Level Calibrator Type 4230 Instruction Manual. In good condition. Comes as pictured. Payment Options: Paypal I do combine shipping on multiple items won. Payment must be received within 7 days of the close of auction. If payment isnt received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. International Shipping: I will not ship first class. Only priority or express. Import duties. Taxes, and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. We also do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. ... moreRefund Policy: Fourteen day return policy. Item must be shipped back in the same condition as received. Thank you for viewing my auctions and Good Luck! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1493ab866d9-0x114-
|
|
|
HEATHKIT HD-20, CRYSTAL CALIBRATOR ASSEMBLY MANUAL,1960, 16 PAGES, SCHEMATIC
HEATHKIT HD-20. CRYSTAL CALIBRATOR ASSEMBLY MANUAL,1960, WITH 1973 PARTS SUBSTITUTION PAGE, ORIGINAL NOT A REPRINT! SHIPS CONTINENTAL USA ONLY
|
|
|
Ametek Modcal System Modular Calibrator Multi Function Used
I have up for sale an Ametek Modcal System Modular Calibrator Multi Function. This is Used. We do not have a way of testing this, it looks to be in overall good physical condition. If you have any questions, please don't hesitate to ask. Please check out our other auction listings. For any further inquiries feel free to send me a message. Please see pictures for more details. What you see is what you will get. Please ask questions. Shipping in the US will be FREE in the United States. Sorry No International Shipping. We do combine shipping and give great deals. Thanks and good luck. We require payment in 3-5 days of auctions end. Unless other arrangements are made. If payment is not received we will relist the following week. Please if you bid, please pay. We are only able to accept Paypal as form of payment due to new Ebay policy. We ... moretruly apologize for this inconvenience. I take great care in packaging and shipping so your item arrives to you safely. I ship once a week so you should receive your item 5-10 days after I receive payment. I am only accepting Paypal on this auction. I buy and resell items AS IS and that is how they come to you AS IS.
|
|
|
Honeywell Loveland Controls 550 Temperature Calibrator
Honeywell Loveland Controls 550 Temperature Calibrator This is another fine Gizmo from SurplusGizmos located in Hillsboro Oregon. You may be interested in. Honeywell Loveland Controls 550 Temperature Calibrator Item Description and Features: Please see pictures for more info. Please pay as soon as possible. If you do not pay within three days. Please contact us or respond to our messages. If you do not pay and do not respond to our messages, we will be forced to open an unpaid item case after 7 days. It is polite Ebay behavior to pay within a few days or less if immediate payment is not possible. Please look over the photos carefully and do not assume anything about the item(s) included in this listing. This item is sold as you see in the pictures. Unless otherwise stated. If it is not pictured, it is not included. We are not experts and ... moredo not claim to be with any of the items we sell. We do the best research we can in order to properly represent the item(s) as clearly and honestly as possible. We strongly encourage buyers to do their own research beforehand. If you have any questions, please ask before you make your purchase and we will do our best to answer your questions to the best of our abilities. Please contact us directly before opening up a case against if there are any issues with your order, item, etc. Item Condition: Used/parts/repair. See testing done. Full operating condition unknown due to inability to test further. Please see pictures for more details. Item is sold"as is" No guarantee, Testing Done: Power tested at 12VDC. Battery needs to be replaced. Doesn't seem to hold a charge. It needs to have a charge to work. Got it to turn on once and it seemed to work. Not able to turn on again. No further testing done. You will Receive: 1) Honeywell Loveland Controls 550 Temperature Calibrator Item Weight: Shipping Weight is approximately 11 pounds. If purchasing multiple items. We will send you an updated invoice with combined shipping when possible. You can also reach us by visiting our
|
|
|
Taylor Precision Calibrator B Part No 152S3 30V DC 24mA Calibrator Meter
I-16-C) Here we have for your consideration the Taylor Model B Precision Calibrator. The unit powers on and spindle needle moves. Controls and knobs are easily adjustable. Comes housed in a handy convenient case for easy portability. Lid opens and closes properly and locks in place. Includes alligator clips and power cord. Specifications: 24 mA 30 V DC Part No. 152S3 Unit is in good cosmetic condition with normal use discoloration. BE SURE TO CHECK OUT OUR OTHER EBAY AUCTION SITES! spartasurplus and spartawholesale! BE SURE TO CHECK OUT OUR PHOTOS! YOU WILL BE RECEIVING THE EXACT ITEM SHOWN. THANK YOU For considering our item! We have been selling on ebay for over 12 years! Bid With Confidence!
|
|
|
Check Mate 600 - 23415P Pressure Calibrator - 100 PSI
This calibrator is used but in great condition. Works perfectly. Retails new for over $1.500.00! 16.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E16%3E-1494269a25e-0x114-
|
|
|
Fluke 5102B Calibrator OPT -03 -05 w/ 1yr NIST Traceable Calibration
Fluke Model 5102B Calibrator OPTS-03-05 w/ 1 year ISO 17025 Accredited Calibration This item is in good cosmetic condition. Please allow three days from date of purchase for calibration and packing process. If you have any questions about this item. Please feel free to ask before purchasing. Your Total Metrology Solution MSI Viking Gage is dedicated to becoming Your Total Metrology Solution. Our experienced. Professional staff can help you solve your most complex measuring problems quickly and efficiently. We have more than four decades of experience and we provide Sales. Calibration, Repair, Contract Inspection and even Custom Design and Modification of precision measuring equipment. You’ll find that with our comprehensive offerings and friendly dedicated staff there is no reason to go anywhere else. If you have any questions or concerns ... moreregarding this item. Please feel free to contact us.Please advise you are inquiring information about a product listed on Ebay! Thank you for visiting our page and considering us for the opportunity. We look forward to doing business with you! Have a wonderful day Payment: We accept PayPal on all purchases and payment must be received within 3 business days. Shipping: We take great care in the packaging of your items and use the best quality materials to ensure safety during transport. Most items will ship UPS or FedEx. Depending on size and weight. If items require freight, we will specify in the product details page. Shipping of multiple orders/items will be combined if possible to provide the lowest rate. Terms of Sale: Once the auction has closed. Winners should contact us with any questions or special requests that may you may have. After the auction has ended. Payment should be made within a timely manner unless otherwise specified to us. All items come with a 14 day return policy. A restocking fee may be charged due to certain circumstances of the sale. We will do our best to ensure that you are happy with your purchase. Our facilities are open through the week but
|
|
|
HPAGILENT/ BOONTON RADIO CO. PEAK POWER CALIBRATOR TYPE 8900B
This is a HP AGILENT/ BOONTON RADIO CO. PEAK POWER CALIBRATOR TYPE 8900B. This item came from a Standards laboratory w/ calibrated sticker 8/16/2012 to 8/14/2014. See photos for item details. Hawaii. Alaska, PR, will have added shipping surcharges, please ask for quote prior to bidding.
|
|
|
Altek 334 Loop Calibrator/ Bata 444 Loop Calibrator
This is a Beta 444 loop calibrator in great shape. It's just like the Altek 334. I have used this very little.
|
|
|
Fluke 515A Portable Calibrator A/N 25151SE
Test Equipment Solutions Today Excellence In Electronic Test And Measurement Fluke 515A Portable Calibrator A/N 25151SE Unit is being sold AS-IS and is Sold with NO Warranty Unit was received in a lot and has not been checked so may need repair. No manuals or accessories are included unless shown in the picture. Payment Payment shall be in advance of shipment. Test Equipment Solutions Today accepts PayPal. Cashiers Check, and Wire Transfer. All International customers require a wire transfer of funds. All payments are to be made in US Dollars. S hipping We do not charge a handling FEE so please note prices quoted are carrier charges only based on weight of the actual unit. F.O.B. point is Test Equipment Solutions Today’s Inventory Center in San Carlos. California. Shipments will be made by means specified by the customer and at the customers ... moreexpense in accordance with Test Equipment Solutions Today’s standard shipping and handling charges. We ship Federal Express and UPS ONLY. Shipping cost is the responsibility of the buyer unless otherwise stated in the description of the unit. International orders can only be shipped Federal Express International Economy. Buyer must complete the US Department of Commerce FORM BIS-711. Return Policy Our goal is that you are completely satisfied with your purchase. We take pride in the quality of the products we sell and offering great customer service is our top priority. If you are not completely satisfied with your purchase. Please follow the guidelines detailed below and we will be happy to help you to return your purchase. Please make sure your purchase was covered under our warranty. Before returning any item please email or call our EBay customer service for a RMA Item being returned must match original sales order Item must be within warranty period. Contact EBay Support for warranty conditions) Buyer pays return shipping Guarantee We want you to order with confidence. So we guarantee your satisfaction. After receiving your order, if you’re not satisfied with our equi
|
|
|
Honeywell Loveland Controls 510 Electronic Calibrator
Honeywell Loveland Controls 510 Electronic Calibrator This is another fine Gizmo from SurplusGizmos located in Hillsboro Oregon. You may be interested in. Honeywell Loveland Controls 510 Electronic Calibrator Item Description and Features: Please see pictures for more info. Please pay as soon as possible. If you do not pay within three days. Please contact us or respond to our messages. If you do not pay and do not respond to our messages, we will be forced to open an unpaid item case after 7 days. It is polite Ebay behavior to pay within a few days or less if immediate payment is not possible. Please look over the photos carefully and do not assume anything about the item(s) included in this listing. This item is sold as you see in the pictures. Unless otherwise stated. If it is not pictured, it is not included. We are not experts and do ... morenot claim to be with any of the items we sell. We do the best research we can in order to properly represent the item(s) as clearly and honestly as possible. We strongly encourage buyers to do their own research beforehand. If you have any questions, please ask before you make your purchase and we will do our best to answer your questions to the best of our abilities. Please contact us directly before opening up a case against if there are any issues with your order, item, etc. Item Condition: Used. See testing done. See pictures regarding broken/missing feet. Full operating condition unknown due to inability to test further. Please see pictures for more details. Item is sold"as is" No guarantee, Testing Done: Power tested with 12VDC(not sure if 12VDC power supply is right for it but it worked-NOT INCLUDED) Turns on. Buttons function. Battery needs to be replaced, doesn't hold a charge. You will Receive: 1) Honeywell Loveland Controls 510 Electronic Calibrator Item Weight: Shipping Weight is approximately 11 pounds. If purchasing multiple items. We will send you an updated invoice with combined shipping when possible. You can also reach us by visiting our retail st
|
|
|
Tektronix Amplitude Calibrator AMP #067-508
Tektronix Amplitude Calibrator. Works fine. Cleaning out garage, great opportunity for one who can use this tool. Shipping USPS priority mail at cost, extimate $15. International at cost. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-149426b8847-0x108-
|
|
|
Larson Davis 800 B Sound Level Meter with Quest Calibrator
This meter looks well maintained and does not look overly used. It is a working meter and a CA-22 Calibrator Quest. Mic is 1/2 inch( Larson Davis 2559) type 1. Unit comes with a 30day warranty Serial number 0118
|
|
|
QUEST Electronics 215 Sound Level Meter w/ Sound Calibrator CA-12 & PH-35
QUEST Electronics 215 Sound Level Meter w/ Sound Calibrator CA-12& PH-35 You are bidding on the QUEST Electronics 215 Sound Level Meter w/ Sound Calibrator CA-12& Peak Hold Module PH-35. Item is in good physical and working condition- tested only basic functions of Calibrator and Peak Hold Module. Sound Calibrator CA-12& Peak Hold Module PH-35 have not been tested. For a better idea of this item please view the picture. If no software. Cables, power supplies, boxes, manuals etc. are pictured or are offered in the Ebay description or Ad, then they are not included in this listing. If no software. Cables, power supplies, boxes, accessories, manuals etc. are pictured or are offered in the Ebay description or Ad. Then they are not included in this listing. Buyer must either pay or contact the seller within 5 days of auction end. We ... moregladly accept Paypal. Please include auction# with all of your payments. Payments without this information will experience delays in processing and/ or be returned. Payment is accepted in U.S.A. currency only. If you paid for your product via Paypal eCheck your order will ship once Paypal clears your payment. Items are normally shipped within 1 to 2 business days of processing the payment. Please note that weekends and holidays are not included. All shipments within USA are issued a tracking number. If you would like to receive it, please drop us a PM and we will be happy to provide it. To encourage buyers to buy more than one item. We do offer a shipping discount. If items can be packed in the same box, we will discount your shipping and handling costs as follows: the highest shipping cost between the items plus half of the cost of the other items that can be packed together. Items must be paid for in one payment to be eligible for combined shipping discount. We do offer clients pickup from our location to save you the shipping and handling altogether. Shipping and handling fees quoted do include a portion for packaging and handling cost but are still very reasonable consideri
|
|
|
LARSON DAVIS CA250 PRECISION ACOUSTIC CALIBRATOR PRM900B 3572 PRE AMPLIFIER MORE
The photos show all of the items: Larson Davis parts and cables. I have no way of checking these things. But they do go with the Larson Davis 2900 Sound Level Meter and Real Time Frequency Analyzer that I have listed, or have already sold. The descriptions below should be in the order of the photos in this listing. CA250- Precision Acoustic Calibrator 250 Hz. 114 dB SPL. Calibration seal is intact. This hums when a 9 volt battery is installed. But will not stop humming when the switch is pressed. I believe the switch is broken. There is an audio outlet port on the top, where the metal screen is, that has an o-ring seal, that I believe the microphone slides into to form a seal. You can see this in the two photos of this device. PRM900B 3572- Pre-amplifier. This has a microphone screw connection on one end. And a 5-pin port on the other end ... morethat either an extension cable plugs into or this can plug directly into the pre-amp input ports of the Larson Davis 2900. The extension cables are listed below for this. There are two photos of this, to show each end of the pre-amplifier. In it's plastic case with cap. EXC010- Ten foot extension cable. 5-pin, that plugs into the preamp inputs of the Larson Davis 2900. Male on one end, female on the other, extends the preamp input connection to your microphone to provide distance so that you don't interfere with the readings. There are two of these cables, for a total of 20 feet of extension cord. EXC001.5- 18 inch(1.5 foot) extension cable. Just like the 10 footers above. CBL061- 6 foot cable with a BNC connector on one end and a microphone jack style connector on the other end that will plug into the Larson Davis 2900 ports for"AC OUTPUTS" DC OUTPUT" SIGNAL GEN" and"TACH IN" CBL001- 7 foot cable with BNC connector on one end and the Larson Davis 5-pin pre-amp input port on the other end. There are two of these cables. UNKNOWN CABLE- This cable has one end cut off and a BNC connector on the other end. Attached to the BNC connector is a BNC
|
|
|
Spectrum Analyzer Calibrator 10MHZ
The Spectrum Analyzer R4131D is not included.For demo only. You are biding below used Calibrator. Brand: ISC(HK) Model: NA Description:Spectrum Analyzer Calibrator You can connect it to any spectrum analyzer which have not cal signal eg. Hameg: HM5010.5005,5006,5011, ATTEN:AT5010.5005,5006,5011, Meili: SM5010.5005,5006,5011, for level accuracy.Center frequency,span linearity testing. Also you can connect it to frequency counter for accuracy checking. Pls. mind the output level = 10 mv rms at 50 ohm termination or 20 mv rms at open circuit. Used product.Tested ok. SPECIFICATION( 25 ℃ +/ 3 ℃) Output frequency: 10MHZ( +/ 5 ppm) ` Output level: 27 dBm( +/ 1 dBm) Output impedance: 50 ohm Operating voltage: 9 V Battery(battery not included) Operating Temperature: 15 to 30 ℃ Operating humidity: 40 to 80% R.H. Size& weight: 60(w) x 30(H) X 100(D) ... moremm. 0.2Kg. net Come with user note(English) Detail information(data sheet.More photo) is available. Please ask if you have question. Thanks
|
|
|
GE General Electric Druck UPS-III-IS Loop Calibrator
| | | | Click to close full size. GE General Electric Druck UPS-III-IS Loop Calibrator. Make: General Electric Model: Druck UPS-III-IS Condition: Item and accessories are in good condition with little wear or damage. Auction includes: Calibrator, Clips, Protective case Guarantee: 30 Day satisfaction guarantee. Sales tax must be collected for all Arizona. Kentucky, Indiana, Texas, Tennessee, Illinois, Washington, Nevada, and Florida buyers. We are unable to accept orders from resellers. Store | About Us | Shipping | Payment | Terms of Sale | FAQ 00207 409487.1 GI Order: 82075 About Us Bid with confidence. World class customer service is always a top priority at Cash America! Cash America Internet Sales. Inc. is an affiliate of Cash America International©, a NYSE company. Affiliates of Cash America have been operating pawnshops and providing ... morespecialty financial services for more than 25 years. Cash America affiliates currently have more than 1,000 locations in the United States and Mexico, operating under the brand names Cash America Pawn, SuperPawn, and Cashland. Please browse through and bid on our items with confidence. By listing our items here we hope to enable the buyer to browse a virtual store with merchandise from various states, and let the deals come to you! Our most important policy is customer satisfaction. Please contact us during or after the auction as we will do as much as possible to make sure you are happy. All items will be shipped quickly and professionally. We'd like to make the buying experience as carefree as possible and want your positive feedback. Our goal is to make sure you'd buy from us again and recommend us to friends and/or fellow eBay users. Feel free to email any questions not answered in the listing. Shipping We ship to all fifty states and any country listed in ebay's Global Shipping program. This item will be shipped via USPS Priority or UPS ground for large items. Shipments will only be made to confirmed PayPal addresses. US Shipping Our goal is to ship within
|
|
|
Vintage Eppley Standard Cell.different from others, very early cell Calibrator.
Vintage Eppley Standard Cell.different from others. Very early cell Calibrator.Extra nice condition,This cell was used in a local military college CLASSES/ LABORATORY,here in Charleston, S.C.
|
|
|
Transmation 1040 digital process signal calibrator
YOU WILL RECEIVE A TRANSMATIONS INC PPS DIGITAL CALIBRATOR MODEL 1040 SOME DETAILS: THE UNIT COMES W/ A CARRING CASE A SET OF LEADS A THERMOCOUPLER PLUS A BOOKLET OF RTD TABLES. UNIT TAKES BATTERIES WHICH ARE NOT COVERED BY ANY WARRANTY. LET US KOW IF YOU HAVE ANY QUESTIONS. THANKS FOR LOOKING
|
|
|
Quest 215 Sound Level Audiometer Calibrator--"READ FULL DETAILS-SEE ALL PICS."
QUEST 215.THIS SET CONSIST OF THE FOLLOWING.215 SOUND LEVEL METER.AUDIOMETER STAND-MODEL AS-1545.OB-45 OCTAVE BAND FILTER[+10 dB]SOUND CALIBRATOR-MODEL CA-12 110 dB-1000 HZ.METROSONICS-CL-302-CALIBRATOR-102 dB-1000HZ.EARPHONE COUPLER-MODEL EC-9A.IN THE PICS.YOU CAN SEE EVERYTHING THATS HERE AND NOTHING MORE.BEING SOLD AS-IS.NO WARRENTY OR REFUNDS.ITS BEEN STORED AWAY FOR A LONG TIME,SO ANY AND ALL BATTERIES NEED TO BE REPLACED FOR SURE.NOT BEEN CHECKED OR TESTED BY ME.WHEN LAST USED EVERYTHING WORKED JUST FINE.BELONGED TO A FRIEND,WHO WAS DOWN IN HIS HEALTH FOR A NUMBER OF YEARS BEFORE HE PASSED AWAY.I'M SELLING OFF A FEW THINGS HE HAD FOR HIS WIFE,TO HELP HER OUT SOME.I REALLY DON'T KNOW MUCH OF ANYTHING ABOUT IT MYSELF.ONLY THAT HE USED IT ALL IN HIS WORK UP UNTIL HE TOOK HIS ILLNESS.ITS NOT BEEN TOUCHED SINCE THEN BY ANYBODY.I ... moreHAVE IN IT ALL OF THE PAPERS AND BOOKLETS HE HAD WITH IT,AND HOPE I GOT GOOD ENOUGH PICS. TO SEE JUST WHAT ALL IS THERE,FOR THOSE INTERESTED,AND KNOW WHAT YOUR LOOKING AT.AND.can maybe correct me if I've gotten something wrong.I HOPE NOT.THIS IS WITH FREE'US' SHIPPING INCLUDED.THANK YOU FOR LOOKIN' IN
|
|
|
SHEPARD THOMASON Diesel Torque Cylinder Calibrator Measure
Not sure what this tool is please if you know let me know. Thank you for looking.
|
|
|
Alameda Taper Sine Block, NPT Thread Plug Calibrator, Excellent Condition
This is a Taper Sine Block that is used to calibrate NPT Tapered Pipe Thread Plugs from 1/16" to 3" in Diameter. Pitch Diameter can be checked by the commonly used three wire method directly on the block. Including the major diameter measurement, using a horizontal measuring machine such as a super micrometer or equivalent. This block was purchased new by a calibration company and not needed with the replacement of new equipment so was stored in climate control. The condition is EXCELLENT and could be put into service immediately upon receipt. Sells new for $950.00. Happy bidding!
|
|
|
AlLTEK MILLIAMP LOOP CALIBRATOR MODEL 334
Click thumbs to Enlarge Any additional photos will be below ePawnAmerica has 14 years of experience selling a wide range of items on eBay. We take pride in serving you! Check out our huge selection of diverse products. Everything we sell is guaranteed as described or your money back! Your satisfaction is our number one goal. Keep in mind that we offer hassle-free returns with prepaid return shipping. If you have any questions or problems. Please contact our Customer Service Representatives Dave or Kellie via email. You can also call us at 952-646-1775. Thank you for choosing ePawnAmerica! AlLTEK MILLIAMP LOOP CALIBRATOR MODEL 334 Features and Benefits: ALL 4 TO 20mA LOOP FUNCTIONS Source 0.00 to 24.00mA or-25.0 to 125.0% Read mA or Percent to 52.00mA Simulate 2-Wire Transmitters Measure-99.99 to 99.99 DC Volts Power and Read 2-Wire Transmitters“QUIK ... moreCHE” SWITCH Instant Zero and Span at 4.00& 20.00mA FULL 4 DIGIT ACCURACY 0.05% of 20.00mA Span 0.03% QUIK-CHEK” STANDARD 9 VOLT BATTERIES Months of use. No nightly recharging OVERLOAD PROTECTED Withstands 135 Volts AC/DC without fuses What's included: AlLTEK MILLIAMP LOOP CALIBRATOR MODEL 334 What's Not Included: Original packaging Instructions Condition: This calibrator is used but in good condition There are traces of dirt to the exterior. Scuffs Light cracking on the front near the screws at the bottom corners This has been tested and is working great SKU: 10/24D3-250-016762-Lm Checkout: After the auction has ended please click the checkout button to proceed with your payment. Payments: Payments must be received within 3 days. Unpaid cases will automatically be open by eBay 7 days after purchase. Taxes: 7.125% Sales Tax to Minnesota buyers. All Emails and Invoices will be sent to your registered eBay Email Address. If you are not receiving our emails please check your email spam filters. We Ship to confirmed addresses only! Make any changes to your address before paying. All items will be shipped to your confirmed billing address! Shipping Carriers: Sur
|
|
|
Teledyne API Multi-Gas Dynamic Dilution Calibrator model 700 Mass Flow
Auction Wizard 2000 Listing Template- AW2KLOT#16124 Teledyne API Multi-Gas Dynamic Dilution Calibrator model 700 Mass Flow We gladly ship to most countries! Email us for a Quote Teledyne/API Advanced Pollution Instrumentation Model 700 Dynamic Dilution Calibrator The Model 700 is a microprocessor based calibrator for precision gas analyzers. Using a combination of highly accurate mass flow controllers and compressed sources of standard gases. Calibration standards are provided for multipoint span and zero checks. Up to 4 gas sources may be used. In addition. The Model 700 can be equipped with a permeation oven for generating calibration standards from permeation tubes. There is also an optional built-in ozone calibrator with a programmable ozone generator for an accurate. Dependable source of ozone. An optional photometer allows even more ... moreprecise ozone values. The ozone generator also supports the GPT reaction to allow NO2 calibration. A multi-point linearization curve of the ozone generator is stored in the microprocessor to assure precise control. To ensure even more accurate NO2 output. The calibrator with photometer option measures the ozone concentration prior to doing a GPT. The set up of sequences is extremely simple, and intuitive. As many as 50 independent calibration sequences may be programmed into the M700, covering time periods up to one year. These sequences may be actuated manually, automatically or by a remote signal. The sequences may be uploaded remotely, including remote editing! All programs are maintained in non-volatile memory. The M700 design emphasizes fast response. Repeatability, overall accuracy and ease of operation. It may be combined with the Model 701 Zero Air Generator to provide the ultimate in easy to use, precise calibration for your gas analyzers. Features Precision mass flow controllers for ultra-stable operation Fully programmable for up to 99 sequences with up to 50 points each Microprocessor-based with simple. Multitasking, menu-driven software Test and Diagnostic Functi
|
|
|
Halstrup Walcher KAL 84 Portable Pressure Calibrator (Precision Calibrator)
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Halstrup Walcher KAL 84 Portable Pressure Calibrator(Precision Calibrator) Up for auction is a used Halstrup Walcher KAL 84 Portable Pressure Calibrator(Precision Calibrator) What is it? Test Conditions The KAl 84 is a portable device for calibrating pressure gauges. Typical applications include calibrations of medical devices such as blood pressure meters. Ventilators and infusion pumps. The halstrup walcher KAL 84 pressure calibration device is also used in the manufacture of pressure sensors and pressure switches. Its sturdy construction and rechargeable 9 Volt battery also makes this instrument ideal for use in assembling pressure transducers, as it allows the transducers to be calibrated on site. Use of the KAL 84 for quality assurance purposes, eg. as a transfer ... morestandard for test equipment monitoring, is also becoming increasingly important. The KAL 84 pressure calibrator consists of a pressure sensor. A liquid crystal display and a transmitter wheel used to generate the desired pressure. Unit was tested to power on only. Unfortunately we do not have the proper equipment to perform further test. Sold As Is*Only Pictured Items(s) Included* Physical/Cosmetic Condition Good/ Used with some scratches. 9 Volt Battery Not Included. Please closely examine the pictures closely) Only Pictured Items(s) Included* No Software. Cables, Manuals Or further Hardware Included. Bidders are expected to do their own research in regard to the compatibility and hardware/Software requirements for any item they are considering purchasing. As well as any necessary configurations needed for allowing correct operations and system functionality. WARRANTY INFORMATION This Item is Protected by a DOA guarantee covering 7 days from shipment for TEST completed. And CONDITIONS as described, above otherwise item is sold"as is" and carries no warranty, implied or other. The buyer pays return shipping. A 20% restocking fee may apply. Batteries: are considere
|
|
|
Altec Calibrator Universal rtd 311A And Milliamp Calibrator 434
TWO CALIBRATORS.ONE RTD 311A,AND ONE MILLI AMP434 MADE BY ALTEK USED BUT GOOD CONDITION
|
|
|
Wavetek 9500 scope calibrator 9500/1100 (1.1GHz)
Used wavetek oscilloscope calibrator type 9500 exact type 9500/1100(1.1GHz) Don't hesitate to ask us more pictures and informations sold with the documentation all the heads are types 9530
|
|
|
Fluke 705 Precision Loop Calibrator calibrated electrical test equipment
$12*SHIPPING*INSURED*USPS*MAINLAND USA ONLY* ITEM FOR SALE* FLUKE 709 LOOP CALIBRATOR USED SHAPE- WORKS GREAT*SHIPPING TERMS* $12 shipping with insurance to anyone in the main land of United Stat es. Please keep in mind. Groun d shipping varies from 2-3 days. Once payment is received. The item will be shipped within 48 hours. I will also message you the tracking number as soon as it is shipped. Local Pick-up are also accepted! PAYMENT TERMS* CASH IF IT IS LOCAL PICK PAYPAL ONLY IF SHIPPED Payment must be received within 48 hours after the auction has ended. After 48 hours the item will have an open case. PAYPAL ACCOUNT MUST BE VERIFIED* REFUND TERMS* If the item is damaged and not insured by the buyer. Then shipping is at the buyers expense. If the item is damaged but insured by the buyer, then it at the sellers expense.
|
|
|
Measurements 111-B Crystal Calibrator Operating Instructions w/schematic
Measurements 111-B Crystal Calibrator Operating Instructions w/schematic Manuals in good used condition. 14 day right of return. General description: Measurements 111-B Crystal Calibrator Operating Instructions w/schematic-61205/M138F We have in stock over 70.000 manuals for test equipment. If you don't find what you need, please give us a call. For questions or additional information. Please contact our Customer Service department at: 1-800-527-4642. Items may be listed on multiple sites. Availability is subject to prior sale. Warranty: 30days Return Right: 14day Payment Options We accept: PayPal(preferred) Major Credit Cards(additional Information may be required) Wire Transfer Texas residents Only: Sales tax will be charged(Please contact Tucker Electronics at 1-800-527-4642 before making payment) Shipping Information We ship via Fed ... moreEx or USPS. Approx Weight: 1 lb. Boxed Dim: 15x12 Envelope. INTERNATIONAL BUYERS: USPS INTERNATIONAL FIRST CLASS MAIL CAN TAKE FROM 4 TO 5 WEEKS FOR DELIVERY. LIMITED TRACKING AVAILABLE AFTER IT LEAVES TEXAS UNTIL IT ARRIVES AT DESTINATION. DO NOT ORDER BY THIS METHOD IF YOU EXPECT DELIVERY IN 5-10 DAYS. YOU NEED TO ORDER BY USPS PRIORITY MAIL WHICH IS CONSIDERABLY MORE EXPENSIVE. BUT QUICKER. E-MAIL US IF YOU HAVE A QUESTION OR NEED A QUOTE ON PRIORITY MAIL. Auction Sales Policy We will contact the winning bidder via e-mail with 2 business days after the auction has ended. Winning bidders must confirm their order within 3 business days after notification. Additional instructions for completion of sale will be included in the e-mail notification. Payment must be received within 7 business days after the order is confirmed. Or the winning bid will automatically be voided. Exceptions to this rule will be made on an individual basis. Please contact us within 3 business days if you need special arrangements. Tucker Electronics phone: 1-800-527-4642) Any and all state and local sales. Use, excise, privilege, and similar taxes imposed on TUCKER or which TUCKER has a duty to
|
|
|
Bruel & Kjaer 2219 Sound Level Meter Gauge & 4230 Calibrator
Bruel& Kjaer 2219 Sound Level Meter Gauge& 4230 Calibrator Description: For your consideration is a Bruel& Kjaer 2219 Sound Level Meter Gauge& 4230 Calibrator. This set is in guaranteed perfect working order. It includes the Bruel& Kjaer 2219 meter. In superb cosmetic shape, the matching Bruel& Kjaer Type 4230 calibrator, and a Bruel& Kjaer leather carrying case for both items. The leather case has some leather-wear, no damage. The calibrator fits very snuggly into its holder in the case, so it will be packed outside of the case. Batteries are included, but it is unknown how much"juice" is left. Battery contacts are clean. Also includes small screwdriver found in the small pocket of the leather case. I always ship within 24 hrs(except holidays and Sundays) Buy from a trusted seller! U nless otherwise ... morespecified this is a used item. And as such it will not be like a new product and will likely have cosmetic flaws. Buyers should view all pictures to ascertain any and all cosmetic flaws and bid accordingly. Electronics buyers please note: Every electronic item sold has a safeguard in place to determine whether the unit has been opened or not(including pictures of internal components) If a buyer returns an item and it is found to have been opened. It will be assumed it has been tampered with and no refund will be given. This process is required to combat unscrupulous customers switching internal components of a unit. Also, many times radio chassis have screws missing. ►ALL of my merchandise is from a SMOKE FREE home. All articles have shipping insurance included in the shipping cost(US only) ►I strive to provide the very best in customer service. And I will do whatever I can to make our ebay transaction POSITIVE! Please leave 5 stars for ALL captions when leaving Feedback! ►Bid with confidence! I have the BEST RETURN POLICY on eBay! see below) Important Information for International Buyers: International buyers please note: I do not grant full or partial compensation(refunds) for
|
|
|
Tyco HealthCare Kendal Portable FirstTemp 3000-PC Genuis Temperature Calibrator
DESCRIPTION This calibrator is used and it has been tested to power on. Unfortunately we were unable to test this item further. But it does not appear to have any exterior damage or broken parts/mechanisms. Includes interface cable. Note that any other cables, accessories or attachments are NOT included. Sold exactly as pictured. What's NOT Included: Any other cables. Accessories, or attachments Manufacturer: Tyco Model: 3000-PC Cosmetics: Used Test Results: Tested for key functions- see description GO GREEN Lower your shipping cost and help the environment! If you are purchasing this item for a specific part or parts. Please let us know. We can pack only the part(s) OR piece(s) you want, send a revised invoice to properly reflect the change in weight, and properly recycle the rest! Electronics Cafe is R2 certified(Responsible Recycling) ... moreand we take preserving the environment very seriously. Every item we list has been processed by a technician and deemed one of the following: tested for full functions(R2 ready for reuse) Tested for key functions(R2 ready for resale) or evaluated as non-functioning. Electronics Cafe specializes in used electronics. When you buy used, fewer electronics end up discarded or in landfills; it saves the raw materials necessary to manufacture new electronics; and it saves the energy used, and pollution created, in the production, manufacturing, and transportation of the new item. That means less resources and waste are cluttering up the Earth's environment! ELECTRONICS CAFE GUARANTEE Thanks for looking at our auction! We are offering a no-hassle. Full guarantee on this item- we'll do what it takes to get five-star ratings across the board. We've been selling on eBay since 1999- our customers are the most important thing to us! Bid with confidence! Questions? Comments? Concerns? Contact us. Every inquiry is of utmost importance and we treat it as such. We strive to provide 5-star service in every category you can rate us on! We greatly look forward to working with you! Po
|
|
|
Fluke 715 Process Calibrator Volt / mA w/ Leads - Excellent Condition (787?)
Used Fluke 715 calibrator w/ test leads. Recently inspected and calibrated. Fully functional. Has never been used in the field. Very clean& overall very nice condition. Measure loop current(0-20 mA. 4-20 mA) signals with very high accuracy of 0.015% and 1 mA resolution Measure voltage output process signals from PLCs. DCSs, transmitters, etc. Source or simulate 24 mA loop current Source voltage to 100 mV or 10V 24V loop supply with simultaneous current measurement Enhanced voltage and current measure and source accuracy Step and linear ramp output function Configurable zero and span settings- Ship only to the lower 48 United States. No exceptions. Please do not ask! Email w/ questions before bidding. Sold as-is. Unit is used and is sold without warranty. Guaranteed working when shipped. Seller is an individual. Not a business. Shipping ... moreinsurance available at an additional cost. Please request insurance if needed. Overnight shipping may be available as well. See last photo for instructions.
|
|
|
Glenair Model 600-007 Torque Wrench Calibrator 3/8"
This is a Glenair Model 600-007 Torque Wrench Calibrator 3/8" In good used condition. PLEASE READ THE ENTIRE LISTING BEFORE BIDDING OR YOUR PURCHASE MAY BE CANCELLED. ALL INTERNATIONAL BIDDERS MUST REQUEST A SHIPPING QUOTE BEFORE BIDDING. DUE TO THE NUMBER OF SCAMMERS WE HAVE ENCOUNTERED OUTSIDE OF THE UNITED STATES. WE WILL ONLY SHIP USING USPS EXPRESS MAIL INTERNATIONAL WHICH IS THE ONLY METHOD THAT OFFERS DELIVERY CONFORMATION ON ALL ORDERS OVER 100.00$(this method may be more expensive so please be sure to request a quote before bidding on an item1) Stores 14A
|
|
|
Vintage Antique Vacuume Tube Reciever Crystal Ham Cb Radio Calibrator ?
Check out my other items! Add me to your favorite sellers. I' Save money buying from me! Add me to your favorite sellers list! Click here Welcome to the best deals on the web! Description of item. Vintage Antique Reciever Crystal Ham Cb Radio calibrator? Not really sure what this is. Seems as if it's a reciever of some type. Untested. Don't know how to test this unit. I removed the cover to add some interior photos. Also there are several photos from before I wiped all of the dust off. Untested not sure how to verify it works. When plugged in the power light comes on. Check my other auctions for more great equipment deals! Often I can give multiple shipping discounts. Please check compatibility and part numbers before ordering! Please click on the pictures for more details. If you need more pictures email me! Refund will be given ... moreif item is returned. Shipping is non refundable. Please use calculator button for shipping costs. Winning bidders must make contact within three(3) business days of auction close. Payment must be received within seven(7) business days or Non-Paying Bidder will be reported. Negative feedback will be posted! Multiple purchases are sometimes eligible for shipping discounts. Please email me before bidding! Item's can be paid in person too. o be shipped! All items sent out for shipment within 1-2 business days! Shipping International. Canada, Mexico, Alaska and Hawaii please email me before bidding for shipping price. Thank you for looking! Good Luck! Happy bidding! Serious bidders only! This page is © Copyright By Cubbys Bargains 2014. All Rights Reserved
|
|
|
Eaton UPS3000 Pressure Calibrator, 50 PSIG, NIST Certified
This pressure calibrator came from a working calibration lab that went out of business. Range is 0-50 PSIG with an accuracy of +/0.05% Unit works perfect but the"CONV" button to change units of measure does not react. The display is set for PSIG when turned on so a calculator is needed to convert to other scales. However. The PSIG has been tested and found within tolerance for each selectable range(10, 25, 50 PSI) Unit will be sold with a FULL NIST calibration from an accredited calibration lab, with full data readings for each range.
|
|
|
CL22C18 Fluke 343A DC Voltage Calibrator 343 A Used
Fluke 343A DC Voltage Calibrator DESCRIPTION Item was pulled from a working environment and powers on. Item was unable to be tested for full functionality in our facility. Item is in fair cosmetic condition with heavier than normal wear from prior use. Including scratching/scuffing and AUCTION INCLUDES Fluke 343A DC Voltage Calibrator. Standard Power Cord AUCTION DOES NOT INCLUDE Manual. Original Packaging, Cables or any other accessories WARRANTY INFORMATION 14 Day Hassle-Free Warranty CONTACT US Store hours: Monday- Friday 7AM- 4PM Central Time Closed: Saturday& Sunday. We are also closed on holidays. Address: 11543 South Memorial Parkway Huntsville AL 35803 Phone Number: 256-650-6223 ext. 2 PAYMENT We accept PayPal and eCheck payments only. SHIPPING We ship within three business days from the day of your cleared payment. Most items ... moreare shipped within one business day of cleared payment. Once your item has shipped the tracking information will be available in your eBay account. We only ship within the 48 contiguous states. And we only ship to confirmed paypal addresses. WARRANTY 14 Day Hassle-Free Warranty Buyer pays return shipping. Please contact us should you have any issues. We will be happy to work with you to your satisfaction and can often resolve issues without the need to return the item.
|
|
|
Extech Model 412355A The Oyster Current Voltage Calibrator Used Free Shipping
You are bidding on a Gently Used Extech Model 412355A The Oyster Current/Voltage Calibrator. The calibrator is fully functional and will come as pictured. Shipping to the lower 48 states will be free.
|
|
|
SKIDMORE-WILHELM R SERIES BOLT TENSION TORQUE WRENCH TOOL CALIBRATOR
GOOD USED TORQUE WRENCH BOLT TENSION CALIBRATOR. SHIPS IN ITS WOODEN CRATE IN A BOX. READY TO WORK 014-10-03-24-38 PLEASE READ BEFORE BIDDING: NO RETURNS description information above supersedes any return or condition info in the data below: BEFORE MAKING YOUR PURCHASE Contact me for freight cost(applies only to items shipped by truck freight) EBAY STORE NAME: industrial tool and machine works EBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– NO RETURNS ... moreFOR ANY REASON OTHER THAN DEAD ON ARRIVAL YOU WILL BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED. INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accurately describe each item. If you have questions or want HI RES photos or testing. Ask. Opinion of condition is just that, an opinion. Ask for specific photos or video of operation for clarification if needed now to avoid tears later. Parts or accessories not in the photo are not included unless stated in the description. Blades included with saws may need to be sharpened. Computers are sold for the value of the hardware only. Any software included is not warranted for performance, valid license or function. Chemicals are not warranted for performance. SOME
|
|
|
BRUNSON 270BN *CALIBRATOR* AA GAGE K+E ESSER 2022 3015 WYTEFACE LEICA T2 NA2 N3
BRUNSON 270BN UNIVERSAL SHORT RANGE CALIBRATOR ~ 720 DEGREE ULTRADEX FROM A WORKING AEROSPACE OPTICAL LAB- MAIN MULTIPLE TARGET COLLIMATOR. PLUMB COLLIMATORS TESTED OK $130.000 NEW COST TODAY- LIGHT SOURCE WIRES NOT SHOWN WIL BE REPAIRED AS NEEDED IF YOU PAY FULL PRICE INFO. LINK: CLICK HERE- To see all of our eBay optical tooling. K+E PRECISION LEVEL SHOWN BELOW NOT INCLUDED IN SALE) Posted with
|
|
|
Extech sound level meter and calibrator 400.00 msrp
Came from working jobsite like new but used condition comes with padded case over 400.00 msrp
|
|
|
SIMPSON Model 886 Sound Level Meter with 890 Calibrator, Case and Accessories
SIMPSON Model 886 Sound Level Meter with 890 Calibrator. Case and Accessories. This is a used Simpson sound measuring system in very good condition and 100% tested. As you can see from the picture the meter has been kept in a secure case with all of the original accessories. Other than some very minor wear this unit is in perfect condition and working as it should. The Simpson 886 Sound Level Meter is a portable. General purpose sound level instrument, capable of accurate sound level measurements over a range of 40 to 140 dB. This encompasses the noise level of a quiet residence to that beyond the threshold of pain. The 886 can be hand-held for rapid testing or mounted on a tripod for measurements over extended periods of time. The microphone also detatches and with the 24ft mic cable the 886 can monitor remotely. Longer cables can be used. ... moreThe 886 is equipped with a range selector switch which references the 0 dB point of the indicating instrument to the range selected. For example when the range switch is set to 70 the zero(0) mark on the black arc is equal to 70 dB. Push-button switches provide quick direct selection of A B or C weighting networks and a battery check function. Fast or slow meter response is switch selectable. Sound Level: Measurement Ranges: 40 dB to 140 dB. Zero(0) dB reference is 20 µNewtons/m². Maximum SPL: 140 dB SPL for linearity within 1 dB. ANSI S1.4-1971 R1976•Operates on 2-9 Volt Batteries(not included) Model 886. Type 2, Catalog# 12620 Package includes•Original case with molded. Secure padding which holds all the items listed below•Simpson 886 Sound Meter•Original 890 Calibrator•24ft Extended Cable Microphone•2 Wrist straps that attaches to sound meter•Microphone Holder. Original manuals for both the meter and the calibration unit•Original Specs sheet• Recorder Output Plug•Adjustment Screw Driver•Instructions and Original Warranty Card CHECK OUT MY STORE_CHECK OUT MY STORE_CHECK OUT MY STORE_CHECK OUT MY STORE_CHECK OUT MY STO
|
|
|
Sound Level Measurement Set 1565B with Calibrator 1567 by General Radio
General Radio Model 1565B hand held sound level meter with a 1567 sound level calibrator. Meter is capable of measuring level A. B, or C. Both come with a soft protective case, and the set comes with a hard shell carrying case. Complete with manual dated 1972. Unit works fine. The only problem is that the battery cover on the meter will not stay shut, so I keep it closed with a piece of duct tape. This is a great tool to have on the factory floor as a guideline for compliance.
|
|
|
X-Rite i1Display 2 Color Calibrator for LCD, CRT, and Laptop Displays xrite
Item is lightly used in excellent working order.
|
|
|
PANTONE X-Rite HUEY PRO MEU113 Monitor Color Calibrator Apple Mac / PC
Used huey pro. Works fine.
|
|
|
H10S HP-100 Digital Torque Meter Calibrator
H10S HP-100 Digital Torque Meter Model: HP-100 Includes: Carrying Case Accessories(as shown in pictures) Instruction Manual Domestic and International Shipping Available- Contact us for further information. Cosmetic condition- Used- Fully Functional. Tested. Calibration expired.
|
|
|
X-RITE i1 DISPLAY 2 COMPUTER SCREEN CALIBRATOR
WE COMBINE SHIPPING DESCRIPTION: Used X-Rite i1(Eye-One) Display 2 computer screen calibration outfit. Part#35.54.30, Rev A, missing the cord weight. We did a diagnostic from the latest diagnostic software downloaded from the X-rite website and it passed. Results shown in the photos(look at the second photo, put your cursor on the image to magnify it) WHO WE ARE: Oddog2 is a husband/wife team. Home-based small business specializing in the buying/refurbishment/selling of primarily photographic equipment. We do occasionally have other items for sale that come to us as a result of our search for camera-related items. We have nearly 40 years of experience(24 years as a hobby, 16 as a full time effort) with photographic equipment, both as a shooter(17 years newspaper photojournalist) and as a collector/restorer/seller. We have been on eBay as ... moreOddog or Oddog2 since September 1999. ONCE YOU BID. YOU HAVE AGREED TO THE FOLLOWING TERMS: US BUYERS Free shipping on items under 1 lb. Shipping within 1 day after purchase. USPS Priority Mail; delivery confirmation included. First class offered if item qualifies by weight and is under $50. Buyer responsible for shipping fees. We combine shipping if multiple items purchased. Fed Ex Ground for large, heavy items. No local pickup. If Paypal is used, we ship only to the address Paypal provides, no exceptions. Payment must be received within 14 days after close of auction. CALIFORNIA RESIDENTS REQUIRED TO PAY STATE TAX. PAYPAL We only ship to the address Paypal provides at time of payment. INSURANCE CLAIMS We are committed to getting the item to you safely. And therefore package the item with that aim in mind. If damage is incurred during shipment, before honoring an insurance claim, please return item and packaging item was shipped in. We DO NOT reimburse item repairs, including but not restricted to shipper's negligence. RETURN POLICY 7 days(from your receipt of goods) satisfaction guarantee. If not as described. We will buy it back. Full reimbursement upon receipt. Item m
|
|
|
CRYSTAL CALIBRATOR ONE CAT. NO. 250-28
CRYSTAL CALIBRATOR ONE CAT. NO. 250-28. It is in average condition. Please ask if you have any questions. Thanks. Justin. Powered by The free listing tool. List your items fast and easy and manage your active items. 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-1497dc2fc0d-0x111-
|
|
|
Vintage GenRad Incorporated Permissible Sound Level Calibrator Type 1562-A
Estate sale find. UNTESTED comes as pictured
|
|
|
C112274 Druck Corp. DPI 610 Portable Pressure Calibrator
Click to Enlarge) Product ID# C112274 This Druck Corp. DPI 610 Portable Pressure Calibrator looks to be in decent cosmetic condition. Showing some signs of wear. The two back top screw assemblies for holding the unit together have broken, so the cover is somewhat loose(please see photos above for detail) It powers up, and the digital display is bright and clear, and it responds to input from the controls. However, this is the extent of my testing of it, and it is being sold as-is. Approximate overall unpacked dimensions: 14"L x 7"W x 6"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed ... moreshipping and handling fee of 47 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 7 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California and Texas Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For al
|
|
|
Quest Technologies 2900 Sound Level Meter + QC-10 Calibrator
Quest Technologies model 2900. Please note I'm not sure if it works or not. It does come with its briefcase. Hope the pics help. Sold as is.
|
|
|
Xoft iCAD Axxent Surface Applicator Calibrator Kit In-Air & Test Fixture & Case
Payment Policy Brand New Sony CyberShot 8 MP Di Xoft iCAD Axxent Surface Applicator Calibrator Kit In-Air& Test Fixture& Case Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Xoft iCAD Axxent Surface Applicator Calibrator Kit In-Air& Test Fixture& Case Used Condition Appears to be NEW/Unused Condition. ICAD Xoft Axxent Electronic Brachytherapy& X-Ray System Surface Applicator Calibration Fixture Kit. Part No: 750802. Calibration Fixture Kit Consits of: Xoft Surface Applicator Shielded Test Fixture. P/N 750791. Xoft Applicator In-Air Calibration Fixture Kit. P/N 750792. And other accessories in original carrying& storage ... morehard shell foamed case. Inventory Number: 3E82973-10-14" Attention Buyers" The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. By listing in this category. You certify that you will comply with all such laws. Our Information: 1) Business Name: USTechStore Inc. 2) City and State of the business: San Jose. CA. 3) Type of Business: Liquidation 4) Contact No. 408-292-5295 If you have questions about legal obligations regarding sales of medical devices. You should consult with the FDA's Center for Devices and Radiological Health: Links: http:www.fda.gov/cdrh/devadvice/ or http:www.fda.gov/cdrh/industry/support/index.html Phone number: 800.638.2041 email: dsmica@cdrh.fda.gov Note: Please also note that all Medical Devices and Equipments should be inspected. Certified and calibrated by a certified technician or an authorized center before using and we as a liquidator are not respons
|
|
|
PANTONE HUEY MONITOR COLOR CALIBRATOR / CORRECTOR
For sale here is a used Pantone Huey Monitor Color Calibrator/ Corrector. Lot is in good condition; it includes Huey with Stand and Software. Item has been tested to power on correctly. But as with all of our auctions, this lot is sold as is, with no warranty, expressed or implied. Thanks for looking; please visit our eBay store!
|
|
 |