|
Order by:
Available to:
eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: China Pointer Length: 30mm/1.18in±1mm/0.04in from the pointer tip to the axes. Feature: 1. Pointer Width: 0.45mm/0.02in±0.05 mm/0.002in. Backlight Board: DC ... more12V 1.2W. If you do not receive our reply within 48 hours, pls.
Buy It Now
Free Shipping Condition: New Location: United States ✿【A/C Switch】 Frequency weighted selection switch A/C switch. Accuracy: ±1.5dB. Resolution: 0.1dB. --- If the item cannot use or you received your item ... morenot as expected.
Buy It Now
$3.23 Shipping Condition: New Location: 金东区, China
Buy It Now
Free Shipping Condition: New Location: China New Automatic Audio/Signal Distortion Meter& Milli-Voltmeter" Suitable For Engineering Services. Electric Lab, Production Line, Audio& HI ... moreFI Tuning/Testing Signal Level& Distortion Measurements" HIGH ACCURACY& RELIABILITY! EASY USE AND OPERATE! General Features: Automatic measurement of distortion and level parameters for audio/ Hi Fi products; Reading based on 400Hz and 1KHz for distortion measurement from 0.01% to 30% full scale; Measure distortion may contain wow and flutter. Simple/ direct measurement without pre-calibration before measurement; Major Specifications: Distortion Measurement: Input level: 10mV to 100Vrms; Measured Frequencies: 2 spot frequencies at 400Hz and 1KHz; Measuring range: 0.01% to 30% full scale in 6 ranges; Harmonic accuracy: +/0.5dB for 2Fo to 10KHz; Residual distortion: 70dB or more; Fundamental rejection: 66dB or more at fo +/5% Automatic frequency selection: +/5% of the nominal turning frequency(fo) Level Measurement- Measure range: 100mV to 100V in 7 ranges; Frequency response: refer to 1KHz) +/0.5dB from 20Hz to 50KHz; +/1dB from 20Hz to 100KHz; Accuracy: +/3% of full scale( 1KHz) Input impedance: 100 Kohm; AC output voltage: Approx. 1Vrms; Max input: 100Vrms( DC+AC) Power requirement: 110V/220V AC selection; Dimensions: 283 x 155 x 264mm; Weight: Approx. 5kg; Accessories: English user manual/ AC cord/ Test Lead BRAND NEW! EASY TO USE& OPERATE! Terms and Conditions Payment Instruction: Buyer accepts the item price and shipping cost when proceeds to" buy-it-now" or placing the bid- We accept PAYPAL. Or bank wire if needed. Payment should be completed within 3 working days after order is made Shipment: Item will be tested fine before ship. Item is normal shipped within 3 to 4 workings days after the payment unless it is otherwise specified- If available. Shipping information will be put on the e-bay when item is shipped Item damage and replacement: If the item damaged upon arriv
Buy It Now
$83.00 Shipping Condition: New Location: China Distortion Range 0.1% To 30% 6 Full Scale. Input Resistance 100K Ω.
Buy It Now
$65.00 Shipping Condition: New Location: China Distortion Range: 0.01% To 30% 6 Full Scale. Input Resistance: 100KΩ. One Year Warranty!!!.
Buy It Now
Free Shipping Condition: New Location: China 0.1dB(100dB). Alarm function. Wall hanging type. With the hanging hole, it can installed on the wall to or free stand on the table. Data storage. Super ... morelarge 9.6" LCD digital display with backlight that makes reading more clear and visually in dark areas.
Buy It Now
Free Shipping Condition: New Location: China New Automatic Audio/Signal Distortion Meter& Milli-Voltmeter" Suitable For Engineering Services. Electric Lab, Production Line, Audio& HI ... moreFI Tuning/Testing Signal Level& Distortion Measurements" HIGH ACCURACY& RELIABILITY! EASY USE AND OPERATE! General Features: Automatic measurement of distortion and level parameters for audio/ Hi Fi products; Reading based on 400Hz and 1KHz for distortion measurement from 0.01% to 30% full scale; Measure distortion may contain wow and flutter. Simple/ direct measurement without pre-calibration before measurement; Major Specifications: Distortion Measurement: Input level: 10mV to 100Vrms; Measured Frequencies: 2 spot frequencies at 400Hz and 1KHz; Measuring range: 0.01% to 30% full scale in 6 ranges; Harmonic accuracy: +/0.5dB for 2Fo to 10KHz; Residual distortion: 70dB or more; Fundamental rejection: 66dB or more at fo +/5% Automatic frequency selection: +/5% of the nominal turning frequency(fo) Level Measurement- Measure range: 100mV to 100V in 7 ranges; Frequency response: refer to 1KHz) +/0.5dB from 20Hz to 50KHz; +/1dB from 20Hz to 100KHz; Accuracy: +/3% of full scale( 1KHz) Input impedance: 100 Kohm; AC output voltage: Approx. 1Vrms; Max input: 100Vrms( DC+AC) Power requirement: 110V/220V AC selection; Dimensions: 283 x 155 x 264mm; Weight: Approx. 5kg; Accessories: English user manual/ AC cord/ Test Lead BRAND NEW! EASY TO USE& OPERATE! Terms and Conditions Payment Instruction: Buyer accepts the item price and shipping cost when proceeds to" buy-it-now" or placing the bid- We accept PAYPAL. Or bank wire if needed. Payment should be completed within 3 working days after order is made Shipment: Item will be tested fine before ship. Item is normal shipped within 3 to 4 workings days after the payment unless it is otherwise specified- If available. Shipping information will be put on the e-bay when item is shipped Item damage and replacement: If the item damaged upon arriv
Buy It Now
Free Shipping Condition: New Location: China New Automatic Audio/Signal Distortion Meter& Milli-Voltmeter" Suitable For Engineering Services. Electric Lab, Production Line, Audio& HI ... moreFI Tuning/Testing Signal Level& Distortion Measurements" HIGH ACCURACY& RELIABILITY! EASY USE AND OPERATE! General Features: Automatic measurement of distortion and level parameters for audio/ Hi Fi products; Reading based on 400Hz and 1KHz for distortion measurement from 0.01% to 30% full scale; Measure distortion may contain wow and flutter. Simple/ direct measurement without pre-calibration before measurement; Major Specifications: Distortion Measurement: Input level: 10mV to 100Vrms; Measured Frequencies: 2 spot frequencies at 400Hz and 1KHz; Measuring range: 0.01% to 30% full scale in 6 ranges; Harmonic accuracy: +/0.5dB for 2Fo to 10KHz; Residual distortion: 70dB or more; Fundamental rejection: 66dB or more at fo +/5% Automatic frequency selection: +/5% of the nominal turning frequency(fo) Level Measurement- Measure range: 100mV to 100V in 7 ranges; Frequency response: refer to 1KHz) +/0.5dB from 20Hz to 50KHz; +/1dB from 20Hz to 100KHz; Accuracy: +/3% of full scale( 1KHz) Input impedance: 100 Kohm; AC output voltage: Approx. 1Vrms; Max input: 100Vrms( DC+AC) Power requirement: 110V/220V AC selection; Dimensions: 283 x 155 x 264mm; Weight: Approx. 5kg; Accessories: English user manual/ AC cord/ Test Lead BRAND NEW! EASY TO USE& OPERATE! Terms and Conditions Payment Instruction: Buyer accepts the item price and shipping cost when proceeds to" buy-it-now" or placing the bid- We accept PAYPAL. Or bank wire if needed. Payment should be completed within 3 working days after order is made Shipment: Item will be tested fine before ship. Item is normal shipped within 3 to 4 workings days after the payment unless it is otherwise specified- If available. Shipping information will be put on the e-bay when item is shipped Item damage and replacement: If the item damaged upon arriv
Buy It Now
Free Shipping Condition: New Location: 金东区, China Switcher working mode: 1-IN-4-OUT / 4-IN-1-OUT. As a 4-way audio splitter, VU2 can work with 4 inputs and 1 output. This mode cannot truly display the ... moreinput level and is not suitable for professional recording situations, but it is suitable for people's regular listening habits.
Buy It Now
$0.38 Shipping Condition: New Location: China Its user friendly interfaces allows for quick responses and high precisions testing, enhancing the overall user experience.
Buy It Now
Free Shipping Condition: New Location: China Distortion Range:0.01% - 30% 6 Full Scale. Input Resistance: 100KΩ.
Buy It Now
Free Shipping Condition: New Location: China Click Here. Double your traffic. Get Vendio Gallery- Now FREE! PH Monitor Digital Sound Level Calibrator(Calibrate Sound Level Meters& Measuring Systems) ... moreThe ND9 Sound Level Calibrator is a handy source for fast& easy calibration of sound level meter. Microphone and sound measuring system. Design to check the accuracy of many types of sound instruments. Moreover. The calibrator employs a solid state integrated circuitry that provides accurate and stable performance. It is Compatible with SL-5868P sound level meter and an IEC942 Class I compliant. Applications: Sensitivity calibration for microphones, Suitable for acoustics field and laboratory use Special Features. Sound Pressure Level with 94 dB and 114 dB High Accuracy with ±0.3 db Generates standard levels and frequencies Extremely low influence of static pressure Sensitivity calibration of microphones Designed for 1" and 1/2" microphones Battery Operated Supplied with Instruction Manual and battery Specifications. Output Sound Level: 94db& 114db Accuracy: ±0.3db(20°C. 760mm Hg) Frequency: 1000±0.1% Hz(allows calibration with A.B,C or D weighting networks or linear Temperature range: 10~50°C(14 ~ 122 °F) Standard: IEC942 Class I Design For: 1" and 1/2" microphones Storage(with batteries removed) 40~65°C(40 ~ 149 °F) Extremely low influence of static pressure Temperature coefficient: 0 to 0.01dB/°C Altitude Effects: Approximately 0.1dB decrease for each 2000 feet increase in altitude from the sea level to 12.000 feet elevation or comparable atmospheric pressure change(approx. every 50mm of Hg decrease) Power Supply: 9v transistor batteries NEDA 1604. Burgess 2U6 or equivalent. Battery life approx. 100 hours Dimension: 48mm x 48mm x 138mm(5.43 x 1.89 x 1.89 inch) Weight: 250g Standard Set Includes. 1 x Sound Level Meters Calibrator 1 x Carrying case( FREE) 1 x 9V Battery installed( FREE) 1 x Instruction Manual Standard factory packaging box, Copyright © 2008. All rights reserved. D
Buy It Now
Free Shipping Condition: New Location: China Click Here. Double your traffic. Get Vendio Gallery- Now FREE! PH Monitor Digital Sound Level Calibrator(Calibrate Sound Level Meters& Measuring Systems) ... moreThe ND9 Sound Level Calibrator is a handy source for fast& easy calibration of sound level meter. Microphone and sound measuring system. Design to check the accuracy of many types of sound instruments. Moreover. The calibrator employs a solid state integrated circuitry that provides accurate and stable performance. It is Compatible with SL-5868P sound level meter and an IEC942 Class I compliant. Applications: Sensitivity calibration for microphones, Suitable for acoustics field and laboratory use Special Features. Sound Pressure Level with 94 dB and 114 dB High Accuracy with ±0.3 db Generates standard levels and frequencies Extremely low influence of static pressure Sensitivity calibration of microphones Designed for 1" and 1/2" microphones Battery Operated Supplied with Instruction Manual and battery Specifications. Output Sound Level: 94db& 114db Accuracy: ±0.3db(20°C. 760mm Hg) Frequency: 1000±0.1% Hz(allows calibration with A.B,C or D weighting networks or linear Temperature range: 10~50°C(14 ~ 122 °F) Standard: IEC942 Class I Design For: 1" and 1/2" microphones Storage(with batteries removed) 40~65°C(40 ~ 149 °F) Extremely low influence of static pressure Temperature coefficient: 0 to 0.01dB/°C Altitude Effects: Approximately 0.1dB decrease for each 2000 feet increase in altitude from the sea level to 12.000 feet elevation or comparable atmospheric pressure change(approx. every 50mm of Hg decrease) Power Supply: 9v transistor batteries NEDA 1604. Burgess 2U6 or equivalent. Battery life approx. 100 hours Dimension: 48mm x 48mm x 138mm(5.43 x 1.89 x 1.89 inch) Weight: 250g Standard Set Includes. 1 x Sound Level Meters Calibrator 1 x Carrying case( FREE) 1 x 9V Battery installed( FREE) 1 x Instruction Manual Standard factory packaging box, Copyright © 2008. All rights reserved. D
Buy It Now
$5.88 Shipping Condition: New Location: China Provides accurate readings in a wide range from 30 to 130 dBA with an impressive ±1.5dB Accuracy and 0.1dB Resolution, you can trust the results. Compact ... moreSize & Large LCD. Frequency range: 31.5Hz~8KHz.
Buy It Now
Free Shipping Condition: New Location: China Distortion Range: 0.01% To 30% 6 Full Scale. Input Resistance: 100KΩ.
Buy It Now
Free Shipping Condition: New Location: China Frequency Weighting:A (Ambient Noise) Weighting. Accuracty: +-1.5dB ( In Standard sound: 94dB@1KHz. Frequency Response Range: 31.5Hz~8.5KHz. We will get ... moreback to you in 12 working hours. Note: this duct does not include battery. ).
Buy It Now
$69.99 Shipping Condition: New Location: China Distortion Range 0.1% To 30% 6 Full Scale. Input Resistance 100K Ω. Lightweight, easy operation. Arrived Rate. United Kingdom. Test Level Range 100M V ... moreTo 100V 7 Ranges. United States.
Buy It Now
Free Shipping Condition: New Location: China Click Here. Double your traffic. Get Vendio Gallery- Now FREE! PH Monitor Digital Sound Level Calibrator(Calibrate Sound Level Meters& Measuring Systems) ... moreThe ND9 Sound Level Calibrator is a handy source for fast& easy calibration of sound level meter. Microphone and sound measuring system. Design to check the accuracy of many types of sound instruments. Moreover. The calibrator employs a solid state integrated circuitry that provides accurate and stable performance. It is Compatible with SL-5868P sound level meter and an IEC942 Class I compliant. Applications: Sensitivity calibration for microphones, Suitable for acoustics field and laboratory use Special Features. Sound Pressure Level with 94 dB and 114 dB High Accuracy with ±0.3 db Generates standard levels and frequencies Extremely low influence of static pressure Sensitivity calibration of microphones Designed for 1" and 1/2" microphones Battery Operated Supplied with Instruction Manual and battery Specifications. Output Sound Level: 94db& 114db Accuracy: ±0.3db(20°C. 760mm Hg) Frequency: 1000±0.1% Hz(allows calibration with A.B,C or D weighting networks or linear Temperature range: 10~50°C(14 ~ 122 °F) Standard: IEC942 Class I Design For: 1" and 1/2" microphones Storage(with batteries removed) 40~65°C(40 ~ 149 °F) Extremely low influence of static pressure Temperature coefficient: 0 to 0.01dB/°C Altitude Effects: Approximately 0.1dB decrease for each 2000 feet increase in altitude from the sea level to 12.000 feet elevation or comparable atmospheric pressure change(approx. every 50mm of Hg decrease) Power Supply: 9v transistor batteries NEDA 1604. Burgess 2U6 or equivalent. Battery life approx. 100 hours Dimension: 48mm x 48mm x 138mm(5.43 x 1.89 x 1.89 inch) Weight: 250g Standard Set Includes. 1 x Sound Level Meters Calibrator 1 x Carrying case( FREE) 1 x 9V Battery installed( FREE) 1 x Instruction Manual Standard factory packaging box, Copyright © 2008. All rights reserved. D
Buy It Now
Free Shipping Condition: New Location: China Pointer Length: 54mm/2.13in±1mm/0.04in. Pointer Width: 0.45mm/0.02in±0.05 mm/0.002in. If you do not receive our reply within 48 hours, pls. If you are ... moresatisfied with our service, pls. Feature: 1. With high definition white backlight, it can be used normally at night.
Buy It Now
Free Shipping Condition: New Location: China Click Here. Double your traffic. Get Vendio Gallery- Now FREE! PH Monitor Digital Sound Level Calibrator(Calibrate Sound Level Meters& Measuring Systems) ... moreThe ND9 Sound Level Calibrator is a handy source for fast& easy calibration of sound level meter. Microphone and sound measuring system. Design to check the accuracy of many types of sound instruments. Moreover. The calibrator employs a solid state integrated circuitry that provides accurate and stable performance. It is Compatible with SL-5868P sound level meter and an IEC942 Class I compliant. Applications: Sensitivity calibration for microphones, Suitable for acoustics field and laboratory use Special Features. Sound Pressure Level with 94 dB and 114 dB High Accuracy with ±0.3 db Generates standard levels and frequencies Extremely low influence of static pressure Sensitivity calibration of microphones Designed for 1" and 1/2" microphones Battery Operated Supplied with Instruction Manual and battery Specifications. Output Sound Level: 94db& 114db Accuracy: ±0.3db(20°C. 760mm Hg) Frequency: 1000±0.1% Hz(allows calibration with A.B,C or D weighting networks or linear Temperature range: 10~50°C(14 ~ 122 °F) Standard: IEC942 Class I Design For: 1" and 1/2" microphones Storage(with batteries removed) 40~65°C(40 ~ 149 °F) Extremely low influence of static pressure Temperature coefficient: 0 to 0.01dB/°C Altitude Effects: Approximately 0.1dB decrease for each 2000 feet increase in altitude from the sea level to 12.000 feet elevation or comparable atmospheric pressure change(approx. every 50mm of Hg decrease) Power Supply: 9v transistor batteries NEDA 1604. Burgess 2U6 or equivalent. Battery life approx. 100 hours Dimension: 48mm x 48mm x 138mm(5.43 x 1.89 x 1.89 inch) Weight: 250g Standard Set Includes. 1 x Sound Level Meters Calibrator 1 x Carrying case( FREE) 1 x 9V Battery installed( FREE) 1 x Instruction Manual Standard factory packaging box, Copyright © 2008. All rights reserved. D
Buy It Now
Free Shipping Condition: New Location: China Datalogger function (8852). Adjustable Alarm-Levels (8852). Hi:80dB~130dB Auto:30dB~130dB. Level ranges. IEC61672-1 Type 2, ANSI S1.4 Type2. Size(HxWxD): ... more278mm x 76mm x 50mm. Display Update. FAST ( 125mS ), SLOW ( 1s ).
Buy It Now
Free Shipping Condition: New Location: China Click Here. Double your traffic. Get Vendio Gallery- Now FREE! PH Monitor Digital Sound Level Calibrator(Calibrate Sound Level Meters& Measuring Systems) ... moreThe ND9 Sound Level Calibrator is a handy source for fast& easy calibration of sound level meter. Microphone and sound measuring system. Design to check the accuracy of many types of sound instruments. Moreover. The calibrator employs a solid state integrated circuitry that provides accurate and stable performance. It is Compatible with SL-5868P sound level meter and an IEC942 Class I compliant. Applications: Sensitivity calibration for microphones, Suitable for acoustics field and laboratory use Special Features. Sound Pressure Level with 94 dB and 114 dB High Accuracy with ±0.3 db Generates standard levels and frequencies Extremely low influence of static pressure Sensitivity calibration of microphones Designed for 1" and 1/2" microphones Battery Operated Supplied with Instruction Manual and battery Specifications. Output Sound Level: 94db& 114db Accuracy: ±0.3db(20°C. 760mm Hg) Frequency: 1000±0.1% Hz(allows calibration with A.B,C or D weighting networks or linear Temperature range: 10~50°C(14 ~ 122 °F) Standard: IEC942 Class I Design For: 1" and 1/2" microphones Storage(with batteries removed) 40~65°C(40 ~ 149 °F) Extremely low influence of static pressure Temperature coefficient: 0 to 0.01dB/°C Altitude Effects: Approximately 0.1dB decrease for each 2000 feet increase in altitude from the sea level to 12.000 feet elevation or comparable atmospheric pressure change(approx. every 50mm of Hg decrease) Power Supply: 9v transistor batteries NEDA 1604. Burgess 2U6 or equivalent. Battery life approx. 100 hours Dimension: 48mm x 48mm x 138mm(5.43 x 1.89 x 1.89 inch) Weight: 250g Standard Set Includes. 1 x Sound Level Meters Calibrator 1 x Carrying case( FREE) 1 x 9V Battery installed( FREE) 1 x Instruction Manual Standard factory packaging box, Copyright © 2008. All rights reserved. D
Buy It Now
Free Shipping Condition: New Location: China Alarm function. Wall hanging type. With the hanging hole, it can installed on the wall to or free stand on the table. Data storage. Frequency Response ... moreRange. Super large 9.6" LCD digital display with backlight that makes reading more clear and visually in dark areas.
$19.95 Shipping Condition: New Location: Saratoga, United States This device operates on a 9V battery (about 30 hours) or an AC adapter (included). A heavy duty carrying case is also included for the protection of the ... moredevice and your convenience. It needs to attach to a computer to log data.
Buy It Now
Free Shipping Condition: New Location: Denver, United States ✿【A/C Switch】 Frequency weighted selection switch A/C switch. Accuracy: ±1.5dB. Resolution: 0.1dB. Data Hold, Max, Min. Frequency Range: 31.5HZ~8.5KHZ. ... moreAuto Power Off. Power Life: about 50 hours. 1 Proctive Case.
Buy It Now
$80.00 Shipping Condition: New Location: China Distortion Range: 0.01% To 30% 6 Full Scale. Input Resistance: 100KΩ. One Year Warranty!!!. Lightweight, easy operation. Test Level Range: 100M V To 100V ... more7 Ranges.
Buy It Now
Free Shipping Condition: New Location: Brentwood, United States Sound Level: 30 ~ 130 dB. Highly accurate with +/-1.5dB. Resolution: 0.1 dB. Accuracy: ±1.5 Db. HOLD, MAX & MIN, AUTO POWER OFF, BACKLIT – Including all ... moreuseful features such as data hold, max recorded reading and min recorded reading as well as auto power off.
Buy It Now
Free Shipping Condition: New Location: China Alarm function. Data storage. Super large 9.6" LCD digital display with backlight that makes reading more clear and visually in dark areas. abusing, alteration, ... moreneglect, disassembly or dropping. After checking we shall send you a new set.
Buy It Now
Free Shipping Condition: New Location: 金东区, China Switcher working mode: 1-IN-4-OUT / 4-IN-1-OUT. As a 4-way audio splitter, VU2 can work with 4 inputs and 1 output. When recording is required, the 0dB ... moreposition can be set arbitrarily. Mute function: support.
Buy It Now
Free Shipping Condition: New Location: United States Widely applicable to individuals, families, enterprises, learning, industry, etc. +/-1.5dB Accuracy with 0.1dB Resolution. Frequency ranges from 30Hz ... moreto 8KHz(The frequency cannot be displayed on the screen in a digital form).
Buy It Now
$19.95 Shipping Condition: New Location: Saratoga, United States This device operates on a 9V battery (about 30 hours) or an AC adapter (included). A heavy duty carrying case is also included for the protection of the ... moredevice and your convenience. Accuracy +/- 1.4 dB.
Buy It Now
$109.99 Shipping Condition: New Location: China Distortion Range: 0.01% - 30% 6 Full Scale. Input Resistance: 100KΩ.
Buy It Now
$76.00 Shipping Condition: New Location: China New Automatic Audio/Signal Distortion Meter& Milli-Voltmeter" Suitable For Engineering Services. Electric Lab, Production Line, Audio& HI ... moreFI Tuning/Testing Signal Level& Distortion Measurements" HIGH ACCURACY& RELIABILITY! EASY USE AND OPERATE! General Features: Automatic measurement of distortion and level parameters for audio/ Hi Fi products; Reading based on 400Hz and 1KHz for distortion measurement from 0.01% to 30% full scale; Measure distortion may contain wow and flutter. Simple/ direct measurement without pre-calibration before measurement; Major Specifications: Distortion Measurement: Input level: 10mV to 100Vrms; Measured Frequencies: 2 spot frequencies at 400Hz and 1KHz; Measuring range: 0.01% to 30% full scale in 6 ranges; Harmonic accuracy: +/0.5dB for 2Fo to 10KHz; Residual distortion: 70dB or more; Fundamental rejection: 66dB or more at fo +/5% Automatic frequency selection: +/5% of the nominal turning frequency(fo) Level Measurement- Measure range: 100mV to 100V in 7 ranges; Frequency response: refer to 1KHz) +/0.5dB from 20Hz to 50KHz; +/1dB from 20Hz to 100KHz; Accuracy: +/3% of full scale( 1KHz) Input impedance: 100 Kohm; AC output voltage: Approx. 1Vrms; Max input: 100Vrms( DC+AC) Power requirement: 110V/220V AC selection; Dimensions: 283 x 155 x 264mm; Weight: Approx. 5kg; Accessories: English user manual/ AC cord/ Test Lead BRAND NEW! EASY TO USE& OPERATE! Terms and Conditions Payment Instruction: Buyer accepts the item price and shipping cost when proceeds to" buy-it-now" or placing the bid- We accept PAYPAL. Or bank wire if needed. Payment should be completed within 3 working days after order is made Shipment: Item will be tested fine before ship. Item is normal shipped within 3 to 4 workings days after the payment unless it is otherwise specified- If available. Shipping information will be put on the e-bay when item is shipped Item damage and replacement: If the item damaged upon arriv
Buy It Now
$99.99 Shipping Condition: New Location: China Distortion Range: 0.01% - 30% 6 Full Scale. Input Resistance: 100KΩ. Test Level Range: 100MV - 100V 7 Ranges.
Buy It Now
Free Shipping Condition: New Location: China Click Here. Double your traffic. Get Vendio Gallery- Now FREE! PH Monitor Digital Sound Level Calibrator(Calibrate Sound Level Meters& Measuring Systems) ... moreThe ND9 Sound Level Calibrator is a handy source for fast& easy calibration of sound level meter. Microphone and sound measuring system. Design to check the accuracy of many types of sound instruments. Moreover. The calibrator employs a solid state integrated circuitry that provides accurate and stable performance. It is Compatible with SL-5868P sound level meter and an IEC942 Class I compliant. Applications: Sensitivity calibration for microphones, Suitable for acoustics field and laboratory use Special Features. Sound Pressure Level with 94 dB and 114 dB High Accuracy with ±0.3 db Generates standard levels and frequencies Extremely low influence of static pressure Sensitivity calibration of microphones Designed for 1" and 1/2" microphones Battery Operated Supplied with Instruction Manual and battery Specifications. Output Sound Level: 94db& 114db Accuracy: ±0.3db(20°C. 760mm Hg) Frequency: 1000±0.1% Hz(allows calibration with A.B,C or D weighting networks or linear Temperature range: 10~50°C(14 ~ 122 °F) Standard: IEC942 Class I Design For: 1" and 1/2" microphones Storage(with batteries removed) 40~65°C(40 ~ 149 °F) Extremely low influence of static pressure Temperature coefficient: 0 to 0.01dB/°C Altitude Effects: Approximately 0.1dB decrease for each 2000 feet increase in altitude from the sea level to 12.000 feet elevation or comparable atmospheric pressure change(approx. every 50mm of Hg decrease) Power Supply: 9v transistor batteries NEDA 1604. Burgess 2U6 or equivalent. Battery life approx. 100 hours Dimension: 48mm x 48mm x 138mm(5.43 x 1.89 x 1.89 inch) Weight: 250g Standard Set Includes. 1 x Sound Level Meters Calibrator 1 x Carrying case( FREE) 1 x 9V Battery installed( FREE) 1 x Instruction Manual Standard factory packaging box, Copyright © 2008. All rights reserved. D
Buy It Now
Free Shipping Condition: New Location: Livingston, United States AMPROBE SM-70. 35 - 103 dB LEVEL RANGE 31.5Hz - 8kHz FREQUENCY RANGE. NEW IN BOX. ACCESSORIES INCLUDED: CARRYING CASE, 9V BATTERY & MINI SCREWDRIVER.
Buy It Now
Free Shipping Condition: New Location: China Distortion Range: 0.01% To 30% 6 Full Scale. Input Resistance: 100KΩ.
Buy It Now
$5.00 Shipping Condition: New Location: China Sound Pressure Level: 94dB & 114dB (Based on 20µPa). Although complex and advanced, it is convenient to use and operate. - Accuracy: +1.5dB (reference ... moresound pressure standard, 94dB at 1KHz). - Removable 1/2" Transducer Cap, Suitable for 1" and 1/2" Microphone Size.
Buy It Now
Free Shipping Condition: New Location: 金东区, China This mode cannot truly display the input level and is not suitable for professional recording situations, but it is suitable for people's regular listening ... morehabits. Generally, music with a slower tempo, slower tempo, rock, punk, etc. is more suitable for music with a faster tempo.
Buy It Now
Free Shipping Condition: New Location: China New Automatic Audio/Signal Distortion Meter& Milli-Voltmeter" Suitable For Engineering Services. Electric Lab, Production Line, Audio& HI ... moreFI Tuning/Testing Signal Level& Distortion Measurements" HIGH ACCURACY& RELIABILITY! EASY USE AND OPERATE! General Features: Automatic measurement of distortion and level parameters for audio/ Hi Fi products; Reading based on 400Hz and 1KHz for distortion measurement from 0.01% to 30% full scale; Measure distortion may contain wow and flutter. Simple/ direct measurement without pre-calibration before measurement; Major Specifications: Distortion Measurement: Input level: 10mV to 100Vrms; Measured Frequencies: 2 spot frequencies at 400Hz and 1KHz; Measuring range: 0.01% to 30% full scale in 6 ranges; Harmonic accuracy: +/0.5dB for 2Fo to 10KHz; Residual distortion: 70dB or more; Fundamental rejection: 66dB or more at fo +/5% Automatic frequency selection: +/5% of the nominal turning frequency(fo) Level Measurement- Measure range: 100mV to 100V in 7 ranges; Frequency response: refer to 1KHz) +/0.5dB from 20Hz to 50KHz; +/1dB from 20Hz to 100KHz; Accuracy: +/3% of full scale( 1KHz) Input impedance: 100 Kohm; AC output voltage: Approx. 1Vrms; Max input: 100Vrms( DC+AC) Power requirement: 110V/220V AC selection; Dimensions: 283 x 155 x 264mm; Weight: Approx. 5kg; Accessories: English user manual/ AC cord/ Test Lead BRAND NEW! EASY TO USE& OPERATE! Terms and Conditions Payment Instruction: Buyer accepts the item price and shipping cost when proceeds to" buy-it-now" or placing the bid- We accept PAYPAL. Or bank wire if needed. Payment should be completed within 3 working days after order is made Shipment: Item will be tested fine before ship. Item is normal shipped within 3 to 4 workings days after the payment unless it is otherwise specified- If available. Shipping information will be put on the e-bay when item is shipped Item damage and replacement: If the item damaged upon arriv
Buy It Now
$10.00 Shipping Condition: New Location: China DB200 (2 channels stereo) display range: -27dB~0dB. Switchable display mode (point display or bar graph display). 1 x Sound Level Display. Size: 482 x ... more44 x 40 (mm). Power: 5W (AC 100V-240V), automotive: DC 12V.
Buy It Now
$1.68 Shipping Condition: New Location: 金东区, China
Buy It Now
Free Shipping Condition: New Location: China Alarm function. Wall hanging type. With the hanging hole, it can installed on the wall to or free stand on the table. Super large 9.6" LCD digital display ... morewith backlight that makes reading more clear and visually in dark areas.
Buy It Now
Free Shipping Condition: New Location: China Alarm function. 0.1dB(100dB). Super large 9.6" LCD digital display with backlight that makes reading more clear and visually in dark areas. Data storage. ... moreWall hanging type. With the hanging hole, it can installed on the wall to or free stand on the table.
Buy It Now
Free Shipping Condition: New Location: United States We take our reputation seriously.
Buy It Now
Free Shipping Condition: New Location: 金东区, China As a 4-way audio splitter, VU2 can work with 4 inputs and 1 output. This mode cannot truly display the input level and is not suitable for professional ... morerecording situations, but it is suitable for people's regular listening habits.
Buy It Now
Free Shipping Condition: New Location: China New Zealand. Slovakia / Slovak. Czech Republic.
Buy It Now
Free Shipping Condition: New Location: United States A/C Switch Frequency weighted selection switch A/C switch. Accuracy: 1.5dB. Resolution: 0.1dB. Data Hold, Max, Min. Frequency Range: 31.5HZ~8.5KHZ. Auto ... morePower Off. Power Life: about 50 hours. 1 Proctive Case.
Buy It Now
$70.00 Shipping Condition: New Location: China The residual distortion : greater than or equal to 70 db (distortion than less than or equal to 10 db, input level greater than or equal to 30 mv). Input ... moreimpedance: 100 k Ω. If the pointer is not zero, but by adjusting the knob of the front panel.
Buy It Now
Free Shipping Condition: New Location: China Adjustable Over / Under alert threshold via computer interface. Record Interval: 1~60 sec / 1~60 min / 1~24 hrs. Dynamic characteristic: FAST (high speed) ... more/ SLOW (low speed). Accuracy: +1.5dB(reference sound pressure standard,94dB@1KHz).
Buy It Now
$4.80 Shipping Condition: New Location: 金东区, China
Buy It Now
$89.99 Shipping Condition: New Location: China Distortion range: 0.01%~30% six kinds of full scale. Input resistance: 100KQ. Test level range: 100MV~100V seven ranges. Storage temperature: -10°C-70"C ... morerelative humidity
Buy It Now
Free Shipping Condition: New Location: 金东区, China Generally, music with a slower tempo, slower tempo, rock, punk, etc. is more suitable for music with a faster tempo. When recording is required, the 0dB ... moreposition can be set arbitrarily. In DB mode, the pointer swing is proportional to the input signal.
Buy It Now
$39.99 Shipping Condition: New Location: China Distortion Range:0.01% - 30% 6 Full Scale. Input Resistance: 100KΩ.
Buy It Now
$70.00 Shipping Condition: New Location: China The residual distortion : greater than or equal to 70 db (distortion than less than or equal to 10 db, input level greater than or equal to 30 mv). If ... morethe pointer is not zero, but by adjusting the knob of the front panel.
Buy It Now
Free Shipping Condition: New Location: China Click Here. Double your traffic. Get Vendio Gallery- Now FREE! PH Monitor Digital Sound Level Calibrator(Calibrate Sound Level Meters& Measuring Systems) ... moreThe ND9 Sound Level Calibrator is a handy source for fast& easy calibration of sound level meter. Microphone and sound measuring system. Design to check the accuracy of many types of sound instruments. Moreover. The calibrator employs a solid state integrated circuitry that provides accurate and stable performance. It is Compatible with SL-5868P sound level meter and an IEC942 Class I compliant. Applications: Sensitivity calibration for microphones, Suitable for acoustics field and laboratory use Special Features. Sound Pressure Level with 94 dB and 114 dB High Accuracy with ±0.3 db Generates standard levels and frequencies Extremely low influence of static pressure Sensitivity calibration of microphones Designed for 1" and 1/2" microphones Battery Operated Supplied with Instruction Manual and battery Specifications. Output Sound Level: 94db& 114db Accuracy: ±0.3db(20°C. 760mm Hg) Frequency: 1000±0.1% Hz(allows calibration with A.B,C or D weighting networks or linear Temperature range: 10~50°C(14 ~ 122 °F) Standard: IEC942 Class I Design For: 1" and 1/2" microphones Storage(with batteries removed) 40~65°C(40 ~ 149 °F) Extremely low influence of static pressure Temperature coefficient: 0 to 0.01dB/°C Altitude Effects: Approximately 0.1dB decrease for each 2000 feet increase in altitude from the sea level to 12.000 feet elevation or comparable atmospheric pressure change(approx. every 50mm of Hg decrease) Power Supply: 9v transistor batteries NEDA 1604. Burgess 2U6 or equivalent. Battery life approx. 100 hours Dimension: 48mm x 48mm x 138mm(5.43 x 1.89 x 1.89 inch) Weight: 250g Standard Set Includes. 1 x Sound Level Meters Calibrator 1 x Carrying case( FREE) 1 x 9V Battery installed( FREE) 1 x Instruction Manual Standard factory packaging box, Copyright © 2008. All rights reserved. D
Buy It Now
$70.00 Shipping Condition: New Location: China The residual distortion : greater than or equal to 70 db (distortion than less than or equal to 10 db, input level greater than or equal to 30 mv). If ... morethe pointer is not zero, but by adjusting the knob of the front panel.
Buy It Now
Free Shipping Condition: New Location: China New Automatic Audio/Signal Distortion Meter& Milli-Voltmeter" Suitable For Engineering Services. Electric Lab, Production Line, Audio& HI ... moreFI Tuning/Testing Signal Level& Distortion Measurements" HIGH ACCURACY& RELIABILITY! EASY USE AND OPERATE! General Features: Automatic measurement of distortion and level parameters for audio/ Hi Fi products; Reading based on 400Hz and 1KHz for distortion measurement from 0.01% to 30% full scale; Measure distortion may contain wow and flutter. Simple/ direct measurement without pre-calibration before measurement; Major Specifications: Distortion Measurement: Input level: 10mV to 100Vrms; Measured Frequencies: 2 spot frequencies at 400Hz and 1KHz; Measuring range: 0.01% to 30% full scale in 6 ranges; Harmonic accuracy: +/0.5dB for 2Fo to 10KHz; Residual distortion: 70dB or more; Fundamental rejection: 66dB or more at fo +/5% Automatic frequency selection: +/5% of the nominal turning frequency(fo) Level Measurement- Measure range: 100mV to 100V in 7 ranges; Frequency response: refer to 1KHz) +/0.5dB from 20Hz to 50KHz; +/1dB from 20Hz to 100KHz; Accuracy: +/3% of full scale( 1KHz) Input impedance: 100 Kohm; AC output voltage: Approx. 1Vrms; Max input: 100Vrms( DC+AC) Power requirement: 110V/220V AC selection; Dimensions: 283 x 155 x 264mm; Weight: Approx. 5kg; Accessories: English user manual/ AC cord/ Test Lead BRAND NEW! EASY TO USE& OPERATE! Terms and Conditions Payment Instruction: Buyer accepts the item price and shipping cost when proceeds to" buy-it-now" or placing the bid- We accept PAYPAL. Or bank wire if needed. Payment should be completed within 3 working days after order is made Shipment: Item will be tested fine before ship. Item is normal shipped within 3 to 4 workings days after the payment unless it is otherwise specified- If available. Shipping information will be put on the e-bay when item is shipped Item damage and replacement: If the item damaged upon arriv
Buy It Now
$50.00 Shipping Condition: New Location: China Distortion Range: 0.01% To 30% 6 Full Scale. Input Resistance: 100KΩ.
|
|
|