|
Order by:
Available to:
eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: China 2: Dual RCA and XLR XLR inputs, XRL XLR outputs. Unbalanced signals can be input to the balanced signal output, and balanced signals can be input to the ... morebalanced signal output. Each channel has common ground and non-common ground switches.
Buy It Now
Free Shipping Condition: New Location: Springboro, United States The MO2020 by Rolls provides a sine and square wave output on two 1/4" jacks. Made in the USA. For more than two decades, those in the know have turned ... moreto Rolls for the highest quality, reliability, and value.
Buy It Now
Free Shipping Condition: New Location: 金东区, China As a 4-way audio splitter, VU2 can work with 4 inputs and 1 output. In DB mode, the pointer swing is proportional to the input signal. When recording ... moreis required, the 0dB position can be set arbitrarily.
Buy It Now
$76.00 Shipping Condition: New Location: China New Automatic Audio/Signal Distortion Meter& Milli-Voltmeter" Suitable For Engineering Services. Electric Lab, Production Line, Audio& HI ... moreFI Tuning/Testing Signal Level& Distortion Measurements" HIGH ACCURACY& RELIABILITY! EASY USE AND OPERATE! General Features: Automatic measurement of distortion and level parameters for audio/ Hi Fi products; Reading based on 400Hz and 1KHz for distortion measurement from 0.01% to 30% full scale; Measure distortion may contain wow and flutter. Simple/ direct measurement without pre-calibration before measurement; Major Specifications: Distortion Measurement: Input level: 10mV to 100Vrms; Measured Frequencies: 2 spot frequencies at 400Hz and 1KHz; Measuring range: 0.01% to 30% full scale in 6 ranges; Harmonic accuracy: +/0.5dB for 2Fo to 10KHz; Residual distortion: 70dB or more; Fundamental rejection: 66dB or more at fo +/5% Automatic frequency selection: +/5% of the nominal turning frequency(fo) Level Measurement- Measure range: 100mV to 100V in 7 ranges; Frequency response: refer to 1KHz) +/0.5dB from 20Hz to 50KHz; +/1dB from 20Hz to 100KHz; Accuracy: +/3% of full scale( 1KHz) Input impedance: 100 Kohm; AC output voltage: Approx. 1Vrms; Max input: 100Vrms( DC+AC) Power requirement: 110V/220V AC selection; Dimensions: 283 x 155 x 264mm; Weight: Approx. 5kg; Accessories: English user manual/ AC cord/ Test Lead BRAND NEW! EASY TO USE& OPERATE! Terms and Conditions Payment Instruction: Buyer accepts the item price and shipping cost when proceeds to" buy-it-now" or placing the bid- We accept PAYPAL. Or bank wire if needed. Payment should be completed within 3 working days after order is made Shipment: Item will be tested fine before ship. Item is normal shipped within 3 to 4 workings days after the payment unless it is otherwise specified- If available. Shipping information will be put on the e-bay when item is shipped Item damage and replacement: If the item damaged upon arriv
Buy It Now
$9.90 Shipping Condition: New Location: China Distortion Range:0.01% - 30% 6 Full Scale. Input Resistance: 100KΩ.
Buy It Now
$8.00 Shipping Condition: New Location: Singapore Multi-Instrument(Standard) with a CD. A hardkey(USB dongle) and a softkey Turn a PC into multiple virtual instruments! Download the 21-day fully functional ... moreFREE trial at: www.virtins.com/MIsetup.exe) 1. Introduction of Multi-Instrument(Standard) Multi-Instrument(Standard) is a powerful PC based multi-function virtual instrument software. It supports a variety of hardware ranging from sound cards which are available in almost all computers to proprietary ADC and DAC hardware such as VT DSOs NI DAQmx cards and so on. It consists of a dual trace oscilloscope. A real time spectrum analyzer, a signal generator and a multimeter, and can run them simultaneously. For a sound card based system. Software triggering is supported. It features a specially designed data acquisition approach, which is able to monitor the input signal continuously without missing any trigger event before a frame of data is collected. It has a very fast screen refresh rate(typically greater than 50 frames per second) It supports sophisticated triggering method including pre-trigger and post-trigger. Both level trigger and differential trigger are supported. For a non sound card based system. The triggering capability depends on the hardware used. Hardware triggering is supported if the hardware used supports it. Software triggering is supported if the hardware used supports data streaming. The software has a multilingual user interface. Including English, French, German, Italian, Spanish, Portuguese, Russian, Simplified Chinese, Traditional Chinese, Japanese, and Korean. It has been widely used in education. Scientific research, audio engineering, electronic engineering, medical diagnosis, vibration analysis, etc. 2. Functions of Multi-Instrument(Standard) A comprehensive range of functions are provided in Multi-Instrument(Standard) Including: 1) Oscilloscope Oscilloscope Mode: dual-trace waveform. Waveform addition, subtraction and multiplication, Lissajous Pattern, transient signal recording, voltmeter. Recording Mode: Record data
Buy It Now
$3.00 Shipping Condition: New Location: China Due to the light and screen difference, the item's color may be slightly different from the pictures. - Size app: 18.5x9x3cm.
Buy It Now
$6.00 Shipping Condition: New Location: China The AS60 Stereo spectrum analyzer is very responsive to rhythm, accurate, dynamic, has concise appearance and high display accuracy the music visualizer ... morehas been Reserved mounting holes and input port to connect external Leads for modification.
Buy It Now
$9.29 Shipping Condition: Used Location: Moline, United States Description Sper Scientific 840005 Analog Sound Level Meter Good Working& Cosmetic Condition Ranges: 40 ~ 80dB. 80 ~ 120dB, Microphone: Capacitance, ... moreCalibration: Signal Oscillator, Accuracy: ±3dB, Payment Payment must be made within 3 days of purchase. To pay by Visa/MC please call 973-610-2326. Terms of Sale International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. About Us As one of eBay's top sellers for over 10 years. B.J.V. Enterprises, LLC combs the market nationwide to bring you the best selection of top brand-names in surplus equipment and tooling. machine shop tools and metalworking equipment. precision inspection equipment. testing and measurement equipment. construction equipment.and more. We are committed to 5-star service. Our goal is to exceed your expectation. If you feel that you have not received 5 star service. Please contact us before leaving feedback and we will work with you to ensure satisfaction. Contact Us Please call 973-610-2326 with any questions.
Buy It Now
$30.00 Shipping Condition: New Location: Singapore RTA-168B-PC Based Real Time Audio Spectrum Analyzer. Sound Level Meter, Distortion Analyzer, Polarity Tester with Multi-Instrument(Standard) Software ... moreLicense(Powered by Multi-Instrument. Download the 21-day fully functional FREE trial at: www.virtins.com/MIsetup.exe and try it out with your computer sound card! RTA-168B is a precision PC based real time audio spectrum analyzer. Sound level meter, distortion analyzer, polarity tester. All its components can be packed into the small black soft pouch case provided and be carried together with your laptop or netbook. It is an indispensable tool for audio or acoustic measurements in both field and laboratory. Application examples are frequency response, distortion measurement and polarity test of a loud speaker, room/car equalization, noise monitoring and analyzing, etc. Combined with the computing power of a modern PC and the powerful virtual instrument software"Multi-Instrument" RTA-168B provides unbeatable performance-to-price ratio compared with any other types of RTA. Furthermore, Multi-Instrument software upgrade for the same license level is FREE for life. RTA-168B Manual can be downloaded at: http:www.virtins.com/VT-RTA-168-Manual.pdf Product page: 1. Package Contents(1) Measurement microphone: EMM-6 and its accessories(a windshield and a microphone clip) 2) XLR-to-USB Converter: VT XLR-to-USB Pre(3) USB cable(1.5 m) 4) CD(contains the copy-protected Multi-Instrument Software) 5) USB hardkey(contains a Multi-Instrument Standard License) 6) Audio Test CD(contains a list of audio test tones and noises) 7) 1/8” TRS cable(1.8m) 8) Black Soft Pouch Case(9) Individual Sound Level Calibration Data(10) Individual Microphone Response Calibration Data 2. Specifications(1) Overall VT RTA-168 Specifications Frequency Range 20Hz ~ 20kHz Sampling Rate 44.1kHz/ 48kHz Bit Depth 16 Bit Number of Input Channels 1 Frequency Accuracy 0.01% Frequency Weighting Flat. A, B, C, ITU-R 468 Time Weighting Linear. Exponential(Equivalent continuous sound l
Buy It Now
$30.00 Shipping Condition: New Location: Singapore RTA-168A-PC Based Real Time Audio Spectrum Analyzer. Sound Level Meter, Distortion Analyzer, Polarity Tester with Multi-Instrument(Standard) Software ... moreLicense(Powered by Multi-Instrument. Download the 21-day fully functional FREE trial at: www.virtins.com/MIsetup.exe and try it out with your computer sound card! RTA-168A is a precision PC based real time audio spectrum analyzer. Sound level meter, distortion analyzer, polarity tester. All its components can be packed into the small black soft pouch case provided and be carried together with your laptop or netbook. It is an indispensable tool for audio or acoustic measurements in both field and laboratory. Application examples are frequency response, distortion and polarity measurement of a loud speaker, room/car equalization, noise monitoring and analyzing, etc. Combined with the computing power of a modern PC and the powerful virtual instrument software"Multi-Instrument" RTA-168A provides unbeatable performance-to-price ratio compared with any other types of RTA. Furthermore, Multi-Instrument software upgrade for the same license level is FREE for life. RTA-168A Manual can be downloaded at: http:www.virtins.com/VT-RTA-168-Manual.pdf Product page: 1. Package Contents(1) Measurement microphone: ECM999 and its accessories(a windshield and a microphone clip) 2) XLR-to-USB Converter: VT XLR-to-USB Pre(3) USB cable(1.5 m) 4) CD(contains the copy-protected Multi-Instrument Software) 5) USB hardkey(contains a Multi-Instrument Standard License) 6) Audio Test CD(contains a list of audio test tones and noises) 7) 1/8” TRS cable(1.8m) 8) Black Soft Pouch Case(9) Individual Sound Level Calibration Data 2. Specifications(1) Overall VT RTA-168 Specifications Frequency Range 20Hz ~ 20kHz Sampling Rate 44.1kHz/ 48kHz Bit Depth 16 Bit Number of Input Channels 1 Frequency Accuracy 0.01% Frequency Weighting Flat. A, B, C, ITU-R 468 Time Weighting Linear. Exponential(Equivalent continuous sound level(Leq) fully complies with IEC61672) Sound Level Meas
Buy It Now
$2.80 Shipping Condition: New Location: China The louder the sound, the more the LED lights up from the bottom up. 2, lamp bead :5mm round head fog LED, light uniform not dazzling (from bottom to ... moretop, green 6, blue 6, yellow 4, red 4);.
Buy It Now
Free Shipping Condition: New Location: China Data Logging function. Adjustable Over / Under alert threshold via computer interface. Record Interval: 1~60 sec / 1~60 min / 1~24 hrs. Widely applicable ... morefor music recording, neighbor noise complaints, industrial or office settings, therapy atmosphere and etc.
Buy It Now
$10.22 Shipping Condition: New Location: 金东区, China
Buy It Now
Free Shipping Condition: New Location: China New Automatic Audio/Signal Distortion Meter& Milli-Voltmeter" Suitable For Engineering Services. Electric Lab, Production Line, Audio& HI ... moreFI Tuning/Testing Signal Level& Distortion Measurements" HIGH ACCURACY& RELIABILITY! EASY USE AND OPERATE! General Features: Automatic measurement of distortion and level parameters for audio/ Hi Fi products; Reading based on 400Hz and 1KHz for distortion measurement from 0.01% to 30% full scale; Measure distortion may contain wow and flutter. Simple/ direct measurement without pre-calibration before measurement; Major Specifications: Distortion Measurement: Input level: 10mV to 100Vrms; Measured Frequencies: 2 spot frequencies at 400Hz and 1KHz; Measuring range: 0.01% to 30% full scale in 6 ranges; Harmonic accuracy: +/0.5dB for 2Fo to 10KHz; Residual distortion: 70dB or more; Fundamental rejection: 66dB or more at fo +/5% Automatic frequency selection: +/5% of the nominal turning frequency(fo) Level Measurement- Measure range: 100mV to 100V in 7 ranges; Frequency response: refer to 1KHz) +/0.5dB from 20Hz to 50KHz; +/1dB from 20Hz to 100KHz; Accuracy: +/3% of full scale( 1KHz) Input impedance: 100 Kohm; AC output voltage: Approx. 1Vrms; Max input: 100Vrms( DC+AC) Power requirement: 110V/220V AC selection; Dimensions: 283 x 155 x 264mm; Weight: Approx. 5kg; Accessories: English user manual/ AC cord/ Test Lead BRAND NEW! EASY TO USE& OPERATE! Terms and Conditions Payment Instruction: Buyer accepts the item price and shipping cost when proceeds to" buy-it-now" or placing the bid- We accept PAYPAL. Or bank wire if needed. Payment should be completed within 3 working days after order is made Shipment: Item will be tested fine before ship. Item is normal shipped within 3 to 4 workings days after the payment unless it is otherwise specified- If available. Shipping information will be put on the e-bay when item is shipped Item damage and replacement: If the item damaged upon arriv
Buy It Now
$10.99 Shipping Condition: New Location: Walnut, United States HOME This Multi-functional Digital Sound/Noise Level Meter with LCD Display is designed to meet the measurement requirement of noise engineers. Noise ... morequality control and health prevention in various environments. Features: Designed according to following standards: International Electrician Committee Standard: IEC 651 TYPE 2& ANSI 1.4 TYPE 2. Wild Measurement Range: 30-130dB. Accuracy: up to â± 1.5dB. Windscreen for Filter-out Unwanted Signals. With 2 equivalent weighted sound pressure levels A and C. AC& DC analogy signal output are available connecting to frequency analyzer level recorder. FFT analyzer and graphic record. A frequence weighting for general sound level measurements. C frequence weighting for checking the low-frequency content of sounds. Large LCD screen with digits reading. Fast and Slow dynamic characteristic modes. Fast rate to pick up the current reading. Slow rate to pick up the reading of average within 1 second. Maximum value holding function to lock up the maximum reading. Equipped with sponge ball. Auto power off design for energy saving. Portable. Easy to use and handy instrument for sound quality control in factory, office, home, school and construction site. Specifications: Accuracy: 1.5dB(under reference conditions) Measuring Level: 30-130dB(A)35-130dB(C) Frequency Range: 31.5Hz to 8.5KHz Linearity Range: 50dB/100dB Digital Display: 5 digits Resolution: 0.1dB Bar Graph: 50 dB scale at 1 dB step for monitoring current sound pressure level display Overload Indication: OVER/UNDER Frequency Weighting: A and C Level Ranges: 30-80dB. 50-100dB, 60-110dB, 80-130dB Self Calibration Time: 3sec Sampling Rate: 20 times/seconds AC Signal Output: 0.707Vrms/ full bar graph. Output impedance is about 600ohm DC Signal Output: 10mV/dB.Output impedance is about 100ohm Dynamic Characteristic: FAST(high speed)SLOW(low speed) Power Supply: 4x AA 1.5V alkaline cells or DC 6V 100mA Microphone: 1/2" Electret Condenser microphone Item dimensions: 256 x 70 x 35mm Item weight: 238g Package
Buy It Now
Free Shipping Condition: New Location: China In a word, we will do our best to serve you. Due to the light and screen difference, the item's color may be slightly different from the pictures. - Size ... moreapp: 18.5x9x3cm.
Buy It Now
Free Shipping Condition: New Location: China New Automatic Audio/Signal Distortion Meter& Milli-Voltmeter" Suitable For Engineering Services. Electric Lab, Production Line, Audio& HI ... moreFI Tuning/Testing Signal Level& Distortion Measurements" HIGH ACCURACY& RELIABILITY! EASY USE AND OPERATE! General Features: Automatic measurement of distortion and level parameters for audio/ Hi Fi products; Reading based on 400Hz and 1KHz for distortion measurement from 0.01% to 30% full scale; Measure distortion may contain wow and flutter. Simple/ direct measurement without pre-calibration before measurement; Major Specifications: Distortion Measurement: Input level: 10mV to 100Vrms; Measured Frequencies: 2 spot frequencies at 400Hz and 1KHz; Measuring range: 0.01% to 30% full scale in 6 ranges; Harmonic accuracy: +/0.5dB for 2Fo to 10KHz; Residual distortion: 70dB or more; Fundamental rejection: 66dB or more at fo +/5% Automatic frequency selection: +/5% of the nominal turning frequency(fo) Level Measurement- Measure range: 100mV to 100V in 7 ranges; Frequency response: refer to 1KHz) +/0.5dB from 20Hz to 50KHz; +/1dB from 20Hz to 100KHz; Accuracy: +/3% of full scale( 1KHz) Input impedance: 100 Kohm; AC output voltage: Approx. 1Vrms; Max input: 100Vrms( DC+AC) Power requirement: 110V/220V AC selection; Dimensions: 283 x 155 x 264mm; Weight: Approx. 5kg; Accessories: English user manual/ AC cord/ Test Lead BRAND NEW! EASY TO USE& OPERATE! Terms and Conditions Payment Instruction: Buyer accepts the item price and shipping cost when proceeds to" buy-it-now" or placing the bid- We accept PAYPAL. Or bank wire if needed. Payment should be completed within 3 working days after order is made Shipment: Item will be tested fine before ship. Item is normal shipped within 3 to 4 workings days after the payment unless it is otherwise specified- If available. Shipping information will be put on the e-bay when item is shipped Item damage and replacement: If the item damaged upon arriv
Buy It Now
$13.63 Shipping Condition: Used Location: Macon, United States Up for sale is one Quest Q-300 noise dosimeter Came from a business closure In good working order 9V battery is required but not included Only comes with ... morethe mic Data cable is not included Any questions are welcome Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: China R1 And R2 Adjustable Resistance for Adjust Pointer jump. Pls Notice :The Connect cable need you welding on the Driver board. I advise everyone to buy ... moreit!
Buy It Now
Free Shipping Condition: New Location: Miami, United States Original music spectrum from. Adopting MCU to process the audio signal, 56 bit in per channel, 112 bit stereo display. And 5 kinds of display effects ... moreare specially designed.
Buy It Now
Free Shipping Condition: New Location: China As an analog sound level & music spectrum Music Spectrum. Microphone / Line. Adopting 32 bit high-speed processor, the display is more accurate. Kinds ... moreof music spectrum display mode: 6. As a music spectrum.
Buy It Now
Free Shipping Condition: New Location: Louisville, United States Simultaneous work with two signal sources. Distortion (clip) detector. The CON mode for connecting with PC. Displaying with breaking the spectrum into ... moreoctaves. Car Security & Safety. Preparation and holding of audio contests of any format (AMT, EMMA, dB Drag, IASCA, BassRace, etc.), as well via the Internet (optional).
Buy It Now
Free Shipping Condition: New Location: Walnut, United States Accuracy: ±1.5dB. Resolution: 0.1dB. 【A/C Switch 】 Frequency weighted selection switch A/C switch. Accuracy:±1.5dB. Linearity Range:50dB. Sound Pressure ... moreLevel Accuracy±1.5dB. √Max Hold Function. √Back Light.
Buy It Now
Free Shipping Condition: New Location: Hong Kong SAR China Fat Caliper. Angle/Distance/Level/Depth. Tire Gauge. Ring Light. Water Level Alarm. Sound Pressure Level. Sound Pressure accurac y. 60 x 130 x 37.5mm.
Buy It Now
$3.99 Shipping Condition: New Location: China 1 x ASK11 LED Music Audio Spectrum Display. Mode 2: Pointer mode. Long press 3 second: left and right channel switching,3-4 column LED lights for L left ... morechannel,8-9 column LED light for R right channel.
Buy It Now
Free Shipping Condition: New Location: China Two display modes are designed for much fun, dot display or bar display can be switched freely. Audio signal input: stereo L/R RCA / Microphone (optional). ... moreAudio output: stereo L/R RCA. Display mode: dot / bar (switchable).
Buy It Now
Free Shipping Condition: New Location: China Distortion Range: 0.01% To 30% 6 Full Scale. Input Resistance: 100KΩ. We continually strive to update and improve our product line. We will work on resolving ... moreyour particular case ASAP. We are always glad to assist you and stand by our products.
Buy It Now
$101.00 Shipping Condition: New Location: China
Buy It Now
$109.99 Shipping Condition: New Location: China Distortion Range: 0.01% - 30% 6 Full Scale. Input Resistance: 100KΩ.
Buy It Now
Free Shipping Condition: New Location: China Two display modes are designed for much fun, dot display or bar display can be switched freely. Audio signal input: stereo L/R RCA / Microphone (optional). ... moreAudio output: stereo L/R RCA. Display mode: dot / bar (switchable).
Buy It Now
Free Shipping Condition: New Location: China New Automatic Audio/Signal Distortion Meter& Milli-Voltmeter" Suitable For Engineering Services. Electric Lab, Production Line, Audio& HI ... moreFI Tuning/Testing Signal Level& Distortion Measurements" HIGH ACCURACY& RELIABILITY! EASY USE AND OPERATE! General Features: Automatic measurement of distortion and level parameters for audio/ Hi Fi products; Reading based on 400Hz and 1KHz for distortion measurement from 0.01% to 30% full scale; Measure distortion may contain wow and flutter. Simple/ direct measurement without pre-calibration before measurement; Major Specifications: Distortion Measurement: Input level: 10mV to 100Vrms; Measured Frequencies: 2 spot frequencies at 400Hz and 1KHz; Measuring range: 0.01% to 30% full scale in 6 ranges; Harmonic accuracy: +/0.5dB for 2Fo to 10KHz; Residual distortion: 70dB or more; Fundamental rejection: 66dB or more at fo +/5% Automatic frequency selection: +/5% of the nominal turning frequency(fo) Level Measurement- Measure range: 100mV to 100V in 7 ranges; Frequency response: refer to 1KHz) +/0.5dB from 20Hz to 50KHz; +/1dB from 20Hz to 100KHz; Accuracy: +/3% of full scale( 1KHz) Input impedance: 100 Kohm; AC output voltage: Approx. 1Vrms; Max input: 100Vrms( DC+AC) Power requirement: 110V/220V AC selection; Dimensions: 283 x 155 x 264mm; Weight: Approx. 5kg; Accessories: English user manual/ AC cord/ Test Lead BRAND NEW! EASY TO USE& OPERATE! Terms and Conditions Payment Instruction: Buyer accepts the item price and shipping cost when proceeds to" buy-it-now" or placing the bid- We accept PAYPAL. Or bank wire if needed. Payment should be completed within 3 working days after order is made Shipment: Item will be tested fine before ship. Item is normal shipped within 3 to 4 workings days after the payment unless it is otherwise specified- If available. Shipping information will be put on the e-bay when item is shipped Item damage and replacement: If the item damaged upon arriv
Buy It Now
Free Shipping Condition: New Location: Marcus Hook, United States ✿【A/C Switch】 Frequency weighted selection switch A/C switch. Accuracy: ±1.5dB. Resolution: 0.1dB. Data Hold, Max, Min. Frequency Range: 31.5HZ~8.5KHZ. ... moreAuto Power Off. Power Life: about 50 hours. 1 Proctive Case.
Buy It Now
Free Shipping Condition: New Location: Jacksonville, United States ✿【A/C Switch】 Frequency weighted selection switch A/C switch. Accuracy: ±1.5dB. Resolution: 0.1dB. Data Hold, Max, Min. Frequency Range: 31.5HZ~8.5KHZ. ... moreAuto Power Off. Power Life: about 50 hours. 1 Proctive Case.
Buy It Now
$14.80 Shipping Condition: New Location: Lithuania There is a logarithmic circuit. Size of the board: 60 x 50 x 15mm. YOU WILL GET ALL THE PARTS TO ASSEMBLE THE BOARD YOU SEE IN THE PICTURES.
Buy It Now
$3.00 Shipping Condition: New Location: China Due to the light and screen difference, the item's color may be slightly different from the pictures. Usually it cost about 35USD-50USD. - Size app: 18.5x9x3cm.
Buy It Now
Free Shipping Condition: New Location: China UT353 Features. UT353BT Features. UT353: 8.42kg; UT353 BT: 4.2kg. UT353: 40pcs; UT353 BT: 20pcs. UT353: 505mm x 330mm x 280mm; UT353 BT: 367mm x 262mm ... morex 290mm. The sampling rate can be freely converted into "fast/slow".
Buy It Now
$49.99 Shipping Condition: New Location: China Distortion Range 0.1% To 30% 6 Full Scale. Input Resistance 100K Ω. Arrived Rate. United Kingdom. Helpful Links. Test Level Range 100M V To 100V 7 Ranges. ... moreUnited States.
Buy It Now
$7.50 Shipping Condition: New Location: Wilmington, United States Model:R8070SD | Order No:R8070SD. Model: R8070SD. Order No: R8070SD. Using a SD card (max 16GB), a user can manually record up to 99 readings or automatically ... moreby selecting a desired sampling rate from 1 to 3600 seconds.
Buy It Now
$99.99 Shipping Condition: New Location: China Distortion Range: 0.01% - 30% 6 Full Scale. Input Resistance: 100KΩ. Test Level Range: 100MV - 100V 7 Ranges.
Buy It Now
Free Shipping Condition: New Location: Inglewood, United States Press the button for 10s- Reset. It has mode(-40~16dB, for signal ) and AGC mode( wide of AGC adaptive algorithm for better effect). Press the button ... morefor 3s - Switch between real mode and AGC mode. Press the button for 1s - Mode switch.
Buy It Now
$113.00 Shipping Condition: New Location: China Distortion Range: 0.01% - 30% 6 Full Scale. Input Resistance: 100KΩ.
Buy It Now
$186.35 Shipping Condition: Used Location: Parkville, United States • Omni or directional transducer. • Integrated modem mode with data rates ranging from 100 to 9,000 bits per second in multiple frequency bands. • Battery ... moredisconnect fob allows quick battery disconnection.
Buy It Now
Free Shipping Condition: New Location: China Description: This product is designed to meet the measurement requirement of safety engineers. Health, industrial safety offices and sound quality control ... morein various environments. Features: It is designed according to following standards. International Electrician Committee Standard: IEC 651 TYPE 2& ANSI 1.4 TYPE 2. With modern compact and portable appearance design. Accuracy up to ±1.5dB. Maximum value holding function to lock up the maximum reading. Large LCD screen with digits reading. Equipped with a sponge ball. Auto power off design for energy saving. Auto backlight display. Portable. Easy-to-use and handy instrument for sound quality control in factory, traffic, family, and audio system. Specifications: Measuring range: 30-130dBA Accuracy: ±1.5dB Frequency range: 31.5Hz to 8.5KHz Frequency weighting: A Digital display: 4digits Resolution: 0.1dB Sample rate: 2 times/second Microphone: 1/2 inch electret condenser microphone Max hold: MAX Power supply: 9V battery(the battery is not included) Power life: About 30 hours(alkaline battery) Operating condition: 0-40%RH 10-80%RH Storage condition: 10-+60% RH 10-70%RH Product weight: 105g Product size: 14.2* 5.3* 3.5cm Package Includes: 1* Sound Level Meter 1* Sponge Ball 1* User Manual•Item will be shipped within 24 hours after full payment is received. Normally the shippment to worldwide is used to take 20 to 25 business days. Exclude Sat& Sun, We accept PayPal only. Payment must be received in 7 business days of auction closing. Please leave note for your special request(e.g. Colors or Size) in ebay note when you pay the order. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched. If you have any questions. Please feel free to email our servicer,and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us. We greatly appreciate your POSITIVE feedback. Please do NOT leave negative or neutral feed
Buy It Now
Free Shipping Condition: Used Location: Anchorage, United States EXTECH INSTRUMENTS Model 407736 Digital Sound Level Meter Decibel Range Kit NIB Product Details Product Condition EXTECH INSTRUMENTS Model 407736 Digital ... moreSound Level Meter Decibel Range Kit NIB Get this amazing and useful digital sound level reader for any test and aquiering certain knowledge that needs to be known. Extech 407736 Digital Sound Level Meter. 1.5dB Accuracy, A and C weighting, High(75 to 130dB) and Low(35 to 90dB) measuring ranges, 0.1dB resolution, Fast/slow response, Max Hold with reset button, Meets ANSI and IEC 651 Type II standards, Large 0.5" 3-1/2 digit LCD display, UPC 793950407363, Built-in calibration check(94dB) Tripod mount and analog DC/AC conditioned outputs of 10mV/dB, Utilizes 0.49" 12.3mm) condenser microphone, Complete with hard vinyl case and 9V battery A and C weighting High(75 to 130dB) and Low(35 to 90dB) measuring ranges 0.1dB resolution Fast/slow response Max Hold with reset button Meets ANSI and IEC 651 Type II standards Large 0.5" 3-1/2 digit LCD display Built-in calibration check(94dB) Tripod mount and analog DC/AC conditioned outputs of 10mV/dB Utilizes 0.49" 12.3mm) condenser microphone Dimensions: 9.5x2.7x1" 241x69x25mm) Weight 7.6 oz( 215g) Complete with hard vinyl case and 9V battery Brand: Extech Model: 407736 Color: White Size: 9.5x2.7x1" Item is pre-owned and shows minimal to no signs of wear or use. Powers on and reads sound. Comes in original packaging and original box. Box does not have factory seal. Item is pre-owned and shows minimal to no signs of wear or use. Powers on and reads sound. Comes in original packaging and original box. Box does not have factory seal. Payment Shipping Returns Policies About Us PLEASE READ BELOW BEFORE BIDDING We can only accept payment from U.S. registered PayPal accounts. Please do not bid if you do not have a U.S. PayPal account as you will not be able to complete your purchase in PayPal. We accept payment through PayPal. Please make payment through PayPal within 4 days of auction closing. If paymen
Buy It Now
$60.00 Shipping Condition: Used Location: China We will do our best and help you provide the solution.
Buy It Now
Free Shipping Condition: New Location: China It can convert sound into electrical, process data and displays results on LCD. Equipped with sponge to filter out unwanted. Digit & Resolution: 5 bits ... more& 0.1dB. 1x Output Line. If you do not receive our reply within 48 hours, pls.
Buy It Now
$2.98 Shipping Condition: New Location: China 1: Main light bar + fall after peak stop. With ultra-wide range of AGC mode and professional DB mode. Speed setting mode: (in normal mode, press and hold ... morefor 5 seconds to enter, and when exiting, press and hold for 5 seconds to exit).
Buy It Now
Free Shipping Condition: New Location: Denver, United States Search our eBay Store! Quest CA-12 Electronic Solid-State Permissible Sound Audio Level Calibrator SKU: JV-NIC-B-DILSOPD Condition: Used Packaging: OEM ... moreWarranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Quest CA-12 Electronic Solid-State Permissible Sound Audio Level Calibrator. Model: CA-12. 110dB– 1000Hz. Physical Condition: Good; Minor scuffs/scratches. SPECIFICATIONS Acoustic Output· Frequency: 1000 Hz 1 3% Sound Pressure Level: 110 dB reference 20μN/m²· Accuracy: ±0.4 dB(20°C. 760 mm Hg) Temperature Range: 10 to +50°C operating. 40 to +65°C storage(with batteries removed) Temperature Coefficient: 0 to 0.01 dB/°C· Altitude Effects: Approximately 0.1 dB decrease for each 2000 feet increase in altitude from sea level to 12.000 feet elevation, or comparable atmospheric pressure change(approximately every 50 mm of Hg decrease) General· Power Source: Two 9V transistor batteries NEDA 1604, Burgess 2U6 or equivalent. Battery life approximately 100 hours· Construction: Rugged aluminum housing· Case Size: 4 inches by 2-3/8 inches diameter· Weight: 13 oz. including batteries We do not have the necessary resources to test this unit. Dimensions(L" x W" x H" 2 3/8* 2 3/8* 4. Please visit the following link for product information(for informational purposes only) Or Visit: Manufacturer's Description(for informational purposes only) The Quest CA-12 Sound Level Calibrator is a self-contained unit that quickly and precisely verifies the accuracy of microphones and sound measuring instruments. The Calibrator generates a reference sound level at precisely 110 dB and 1000 Hz. The unit is battery operated and therefore fully portable. The CA-12 is primarily a field instrument for on-the-spot accuracy checks of sound level meters. Noise
Buy It Now
Free Shipping Condition: New Location: China 2: Dual RCA and XLR XLR inputs, XRL XLR outputs. Unbalanced signals can be input to the balanced signal output, and balanced signals can be input to the ... morebalanced signal output. Each channel has common ground and non-common ground switches.
Buy It Now
$2.88 Shipping Condition: New Location: China 【AC/DC Output】AC signal output: 4Vrms/ full barograph, output impedance is apx. DC signal output: 33mV/dB. CE Certified & RoHS Compliant.
Buy It Now
Free Shipping Condition: New Location: China Model: TA8151. Dynamic characteristic rotation: Fast/slow. Resolution: 4 digits, resolution 0.1dB. LCD size: 36x33mm/1.42x1.3in. Warranty Service. 1 X ... moreInstruction. Automatic shutdown: After about 10 minutes.
Buy It Now
$1.66 Shipping Condition: New Location: 金东区, China
Buy It Now
Free Shipping Condition: New Location: 宝安区, China Model UT352. Range 30~80dB ±1.5dB. 50~100dB ±1.5dB. 60~110dB ±1.5dB. 80~130dB ±1.5dB. Ending Soon. Data hold, LCD backlight. Analogue Outputs AC: 0.707Vrms ... morefull scale; Output impedance: around 600Ω √.
Buy It Now
$2.88 Shipping Condition: New Location: China Sampling rate: FAST (125ms) / SLOW (1s). Dynamic characteristic: FAST (high speed) / SLOW (low speed). High Accuracy. Accuracy:±1.5dB (reference sound ... morepressure standard, 94dB@1KHz). Max Hold function.
Buy It Now
Free Shipping Condition: New Location: China A built-in high-sensitivity microphone pickup module can effectively capture sound. It adopts 8 glass tubes, each with 23 LED lamp beads, and has 41 display ... moremodes, which can display sound signals with a frequency of 50-12000HZ. The visual music is flexible, and the bouncing LED-colored lamp beads are very gorgeous as a desktop decoration. With an exclusive AGC algorithm, the sensitivity can be automatically and dynamically adjusted to always maintain the best display effect. Using a dedicated processor, the main frequency is up to 240mhz and it only takes 0.0005 seconds to process the sound signal. With a manual brightness adjustment function, it is convenient to choose the appropriate brightness in different places. It has the function of filtering out ambient background noise with one bu.
Buy It Now
$17.80 Shipping Condition: Used Location: Agoura Hills, United States It can use polarized and pre-polarized microphones (not included). External filters can be added (filters not included). There are AC and DC signal outputs. ... moreCurrent operation has been verified by checking sound level readings with the matching microphone and pistonphone.
Buy It Now
Free Shipping Condition: New Location: China Does Not Apply.
Buy It Now
$4.88 Shipping Condition: New Location: China As an analog sound level & music spectrum Music Spectrum. Microphone / Line. Adopting 32 bit high-speed cessor, the display is more accurate. Kinds of ... moremusic spectrum display mode: 6. As a music spectrum.
Buy It Now
Free Shipping Condition: New Location: 金东区, China This mode cannot truly display the input level and is not suitable for professional recording situations, but it is suitable for people's regular listening ... morehabits. Generally, music with a slower tempo, slower tempo, rock, punk, etc. is more suitable for music with a faster tempo.
|
|
|