In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
16.96
Buy It Now
$2.99 Shipping
Condition: New
Location: China
Communication interface: USART serial interface. Interface level: 3.3V/5V TTL level. Interface level: 3.3V CMOS (compatible with 5V). Flash: 4MB. Model: ... moreTJC3224T022-011N. Model: TJC3224T024-011N. Model: TJC3224T028-011N.
$
13.84
Buy It Now
$2.99 Shipping
Condition: New
Location: China
$
2.21
Buy It Now
Free Shipping
Condition: New
Location: China
新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 2?|a€“a°?¥&a circ;ao?§a?a€&ti lde;a?aμ 6 Blue 0.96" SPI Serial 128X64 OLED LCD Display ... moreModule for Arduino/STM32/51/AVR Description: 100% brand new and high quality No font: take the word with modulo software Needn't backlight. The display unit can self-luminous High resolution: 128* 64 Viewing angle: 160 ° Supports many control chip: Fully compatible with Arduino. 51 Series, MSP430 Series, STM32/ 2, CSR IC, etc. Ultra-low power consumption: 0.04W(working normally) Voltage: 3.3V ~ 5V DC Working Temperature: 30 ℃ ~ 80 ℃ Module Size: 27.0MM* 27.0MM* 4.1MM SPI Interface. Need 4 IO only. Driver IC: SSD1306 light color: blue Pin Definitions: VCC:3.3-5V GND: grounding CLK: clock module MOSI: Data input Cs: Chip select signal D/C: Command/ data change Note: Due to the difference between different monitors. The picture may not reflect the actual color of the item. Thank you! Package includes: Blue 0.96" SPI Serial 128X64 OLED LCD Display Module x 1 Payment: We accept payment through Paypal ONLY. If you do not have Paypal account. Please registered with(http:www.paypal.com) Payment must be received within 5 days after auctions ended. Please do not bid if you are not intending to buy. Unpaid dispute will be filed to ebay for the non payable bidders. Shipping and handling: Return Policy: We are not responsible for custom duty or import tax. We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if your are not satisfied with the item after receive it. We could offer refund. And refund request is available only requests within a week after parcel received& returning the item as the same condition as received. We offer 100% refund if the item is broken before arrival. All you need to do is sending us the clear pictures to show it is broken. Defective situation must be noticed within 7 days after delivery. All emails will be answered within 1 business day. If you do not receive our reply. Please kindly re-sent your em
$
19.96
Buy It Now
$5.45 Shipping
Condition: New
Location: Villa Park, United States
2.4" diagonal LCD TFT display. 1 x 2.4" TFT LCD Display Shield Touch Panel Screen. - 5V compatible, use with 3.3V or 5V logic. - Use digital pins 5-13 ... moreand analog 0-3. Instructions/schematic are NOT included.
$
20.78
Buy It Now
$3.50 Shipping
Condition: New
Location: China
Core: ARM® 32-bit Cortex®-M4 CPU with FPU. Low-power operation. IC/OC/PWM or pulse counter and quadrature. RTC: subsecond accuracy, hardware calendar. ... more96-bit unique ID. CRC calculation unit. 54 Mbytes/s.
$
1.99
Buy It Now
Free Shipping
Condition: New
Location: China
$
1.99
Buy It Now
Free Shipping
Condition: New
Location: China
新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 2?|a€“a°?¥&a circ;ao?§a?a€&ti lde;a?aμ 6 White 0.96" SPI Serial 128X64 OLED LCD ... moreDisplay Module for Arduino/STM32/51/AVR Description: 100% brand new and high quality No font: take the word with modulo software Needn't backlight. The display unit can self-luminous High resolution: 128* 64 Viewing angle: 160 ° Supports many control chip: Fully compatible with Arduino. 51 Series, MSP430 Series, STM32/ 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.04W Voltage: 3.3V ~ 5V DC Working Temperature: 30 ℃ ~ 80 ℃ Module Size: 27.0MM* 27.0MM* 4.1MM SPI Interface. Need 4 IO only. Driver IC: SSD1306 Light color: White Pin Definitions: VCC:3.3-5V GND: grounding CLK: clock module MOSI: Data input Cs: Chip select signal D/C: Command/ data change Note: Due to the difference between different monitors. The picture may not reflect the actual color of the item. Thank you! Package includes: White 0.96" SPI Serial 128X64 OLED LCD Display Module x 1 Payment: We accept payment through Paypal ONLY. If you do not have Paypal account. Please registered with(http:www.paypal.com) Payment must be received within 5 days after auctions ended. Please do not bid if you are not intending to buy. Unpaid dispute will be filed to ebay for the non payable bidders. Shipping and handling: Return Policy: We are not responsible for custom duty or import tax. We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if your are not satisfied with the item after receive it. We could offer refund. And refund request is available only requests within a week after parcel received& returning the item as the same condition as received. We offer 100% refund if the item is broken before arrival. All you need to do is sending us the clear pictures to show it is broken. Defective situation must be noticed within 7 days after delivery. All emails will be answered within 1 business day. If you do not receive our reply. Please kindly re-sent your e
$
1.88
Buy It Now
$3.00 Shipping
Condition: New
Location: China
IIC interface. 1 piece White/Blue/Yellow&Blue 0.96" I2C IIC Serial 128x64 OLED LCD LED Display Module for Arduino. Interface type: IIC. OLED display, ... moreno need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
$
2.76
Buy It Now
$3.00 Shipping
Condition: New
Location: China
1PCS Nokia 5110 LCD Disply Module. 84 X 48 dot matrix LCD,can show 4 lines of characters. LCD5110 Module Data interface level:2.7-5V. Why buy from us. ... more2.CE------------chip selection.
$
2.10
Buy It Now
Free Shipping
Condition: New
Location: China
Brand Unbranded/Generic MPN Does not apply UPC Does not apply EAN Does not apply.
$
17.70
Buy It Now
$4.98 Shipping
Condition: New
Location: Silverton, United States
Silverton, Oregon. Elcom Components.
$
9.31
Buy It Now
$2.99 Shipping
Condition: New
Location: China
Driver: ST7735. Driver IC: ST7735. Driver IC: ILI9225. Reserve SPI FLASH font circuit to facilitate extended application. CLK: Serial SPI clock signal. ... moreSDI: serial spi data input signal. 11Pin LCD module interface pin definition.
$
5.49
Buy It Now
$2.99 Shipping
Condition: New
Location: China
The PCF8574 has low current consumption and the port output latch has high current drive capability to directly drive the LED. It also has an interrupt ... moreline (INT open-drain output) that can be connected to the interrupt logic of the MCU.
$
2.21
Buy It Now
Free Shipping
Condition: New
Location: China
$
2.21
Buy It Now
Free Shipping
Condition: New
Location: China
$
26.48
Buy It Now
Free Shipping
Condition: New
Location: China
$
2.76
Buy It Now
Free Shipping
Condition: New
Location: China
新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 1 新建网页 2?|a€“a°?¥&a circ;ao?§a?a€&ti lde;a?aμ 6 White 0.96" SPI Serial 128X64 OLED LCD ... moreDisplay Module for Arduino/STM32/51/AVR Description: 100% brand new and high quality No font: take the word with modulo software Needn't backlight. The display unit can self-luminous High resolution: 128* 64 Viewing angle: 160 ° Supports many control chip: Fully compatible with Arduino. 51 Series, MSP430 Series, STM32/ 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.04W Voltage: 3.3V ~ 5V DC Working Temperature: 30 ℃ ~ 80 ℃ Module Size: 27.0MM* 27.0MM* 4.1MM SPI Interface. Need 4 IO only. Driver IC: SSD1306 Light color: White Pin Definitions: VCC:3.3-5V GND: grounding CLK: clock module MOSI: Data input Cs: Chip select signal D/C: Command/ data change Note: Due to the difference between different monitors. The picture may not reflect the actual color of the item. Thank you! Package includes: White 0.96" SPI Serial 128X64 OLED LCD Display Module x 1 Payment: We accept payment through Paypal ONLY. If you do not have Paypal account. Please registered with(http:www.paypal.com) Payment must be received within 5 days after auctions ended. Please do not bid if you are not intending to buy. Unpaid dispute will be filed to ebay for the non payable bidders. Shipping and handling: Return Policy: We are not responsible for custom duty or import tax. We will leave POSITIVE FEEDBACK after receiving the payment. Please contact us if your are not satisfied with the item after receive it. We could offer refund. And refund request is available only requests within a week after parcel received& returning the item as the same condition as received. We offer 100% refund if the item is broken before arrival. All you need to do is sending us the clear pictures to show it is broken. Defective situation must be noticed within 7 days after delivery. All emails will be answered within 1 business day. If you do not receive our reply. Please kindly re-sent your e
$
5.50
6d 16h 23m 0s
2 bids
$18.10 Shipping
Condition: Used
Location: Norristown, United States
Up for sale is a bonanza of a maker kit. Way too much to list individually, but highlights are below. Also comes with 2 organizer cases and 2 books. Trying ... moreto declutter and hoping this goes to someone else who can enjoy it. - Arduino Uno R3- maker shield- long breadboard- short breadboard- 5 stepper drivers- 2 stepper motors- BIQU110-A3 controller board with built in stepper drivers- LCD display- roller switches- test leads and jumper wires- various spare parts from an old 3D printer- stepper to lead screw coupler- various microchips, transistors, capacitors, resistors, LEDs, and hardware
$
3.73
Buy It Now
$2.81 Shipping
Condition: Neu
Location: China
1 Nokia 5110 LCD Bare Screen 84 48 (NO PCB) for Arduino AVR PIC STM32. OLED LED&RGB. 84 X 48 dot matrix LCD,can show 4 lines of characters. NOTE:This ... moreitem is only Nokia 5100 LCD bare screen without PCB pinboard.
$
2.21
Buy It Now
Free Shipping
Condition: New
Location: China
$
11.50
Buy It Now
$2.48 Shipping
Condition: New
Location: China
8-bit parallel bus, faster than serial SPI refresh. Module Interface 8-bit parallel interface. Resolution 320 240 (Pixel). Module PCB Size 72.20 52.7(mm). ... more320X240 resolution, clear display, support for touch function.
$
2.79
Buy It Now
$2.58 Shipping
Condition: Neu
Location: China
OLED mode: positive. 2:V33 (OLED 3.3V). 3:SCL(OLED IIC Clock line). 4:SDA(OLED IIC Cable). Resolution: 64×128. Module size: 36.5mm×19mm×11.3mm. Display ... moresize: 0.96". Driver chip: SH1107.
$
14.69
Buy It Now
Free Shipping
Condition: New
Location: Milner, United States
Includes built-in OLED screen - easy to set up. On YouTube look for video wRW32gTLsKE and its corresponding GitHub project ESP32_Youtube_OLED. CNC & 3D ... morePrinting.
$
4.09
Buy It Now
$3.79 Shipping
Condition: Neu
Location: China
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. ... moreIn contrast to LCD technology, OLED does not require a backlight.
$
3.39
Buy It Now
$2.99 Shipping
Condition: New
Location: China
$
5.99
Buy It Now
$3.00 Shipping
Condition: New
Location: China
It's 4-wire serial spi interface with pin header connection. Of course, we wouldn't just leave you with a datasheet and a "good luck!". Interface4-Wire ... moreSerial SPI. Dot (Pixel) SizeNo. Dot (Pixel) Pitch0.115x0.115mm.
$
2.78
Buy It Now
$3.78 Shipping
Condition: Neu
Location: China
Support interface: IIC. 3:SCL(OLED IIC Clock line). 4:SDA(OLED IIC Cable). Interface type: IIC interface. OLED mode: positive. 2:V33 (OLED 3.3V). Module ... moresize: 36.5mm×19mm×11.3mm. Display size: 0.96".
$
3.69
Buy It Now
$2.58 Shipping
Condition: Neu
Location: China
1/2/5/10PCS IICI2C TWI SPI Serial Interface Board Module For Arduino 1602LCD. This is another great IIC/I2C/TWI/SPI Serial Interface. With this I2C interface ... moremodule, you will be able to realize data display via only 2 wires.
$
38.85
Buy It Now
$3.50 Shipping
Condition: New
Location: China
Raspberry Pi. Product Introduction. Display interface: HDMI, 40P RGB interface, 8P SPI screen interface. Multiplier (18x 18 Multiplier ): 20. With IF ... morecard holder. Connector: TF card holder, 2x24P 2.54mm pin header pad.
$
27.59
Buy It Now
$3.50 Shipping
Condition: New
Location: China
MCP23017 1602 LCD Shield. 1 Brightness Adjustable 1602 LCD Shiled IIC MCP23017 5 keypad For Arduino UNO R3. MCP23017 ExpanderModule. Uses MCP23017 chip, ... moreit is compatible with 1602 and 12864 liquid crystal screens, through this module is switched, use I2C communication, only need two MCU I/Os to be able to realize the liquid crystal to drive the display.
$
261.25
Buy It Now
$3.59 Shipping
Condition: New
Location: China
Rockchip RK3588S 8-core 64-bit processor. Arduino Module. Orange Pi 5 provides abundant interfaces, including HDMI-compatible output, 26PIN expansion ... moreport, M.2 PCle2.0, Type-C, Gigabit LAN port, 2 USB2.0.
$
17.60
Buy It Now
$2.99 Shipping
Condition: New
Location: China
$
2.39
Buy It Now
$2.58 Shipping
Condition: Neu
Location: China
Item Description: Maybe you also like it: Gamepads JoyStick Keypad Shield PS2 for Arduino nRF24L01 Nokia 5110 LCD I2C JoyStick Keypad Shield for Arduino ... more2009 UNO Mega1280 2560 PIC R3 ARM A077 From Hong Kong. JoyStick Breakout Module Sensor Shield For Robot Arduino UNO 2560 R3 STM32 A072 From Hong Kong. For all version of arduino Main board. 2009, UNO, mega 1280, mega 2560 comes example code direct plug puzzle board. NO soldering needed. Five momentary push buttons(4+ joystick select button. Just like the playstation 3 analog stick push button) two-axis thumb joystick specification: The push buttons are connected to Arduino digital pins 2-6; the related pin will be low when a certain button is pressed. Joystick Y-Axis movement will produce a proportional analog voltage on analog pin 0. While, Joystick X-Axis movement will produce a analog signal on analog pin 1. Add nRF24L01 RF interface Add Nokia 5110 LCD interface. So very easy to game development. Adding a Bluetooth module interface. Convenient Bluetooth wireless serial communication. Add I2C communication interface. Easy connectivity to I2C devices Meanwhile. JoyStick Shield with a cross PS2 joystick with buttons, there are four round buttons, 2 small buttons. Provides for the Arduino joystick and buttons input expansion. Onboard switches can switch between 3.3V and 5V, can use this model for other 3.3V microcontroller platforms, such as STM32. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback. So that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them! The items you ordered will be shipped out in 1 business day by Hong Kong Air Mail when your payment is clear. The arrival time is 5-20 business days to United States usually. We ensure dispatch the item within 1-2 business days. However. You bought the item from opposite side of the earth, so i
$
13.33
Buy It Now
$2.86 Shipping
Condition: New
Location: China
$
2.16
Buy It Now
$3.78 Shipping
Condition: Neu
Location: China
1 Nokia 5110 LCD Bare Screen 84 48 (NO PCB) for Arduino AVR PIC STM32. 84 X 48 dot matrix LCD,can show 4 lines of characters. Can use the conductive glue ... moreto connect the module with the printed board,without connecting cable.The.
$
3.33
Buy It Now
Free Shipping
Condition: New
Location: China
$
3.00
Buy It Now
$3.20 Shipping
Condition: New
Location: China
1/2/5PCS 128x64 White LED display module for Arduino. Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Pin Definition: ... moreGND, VCC ,SCL, SDA. Ultra-low power consumption: full screen lit 0.08W.
$
2.06
Buy It Now
$3.79 Shipping
Condition: Neu
Location: China
0.96" I2C IIC SPI Serial 128X64 White OLED LCD LED Display Module for Arduino Product information Feature Super High Brightness(Adjustable) Super ... moreHigh Contrast(Adjustable) Embedded Driver/Controller Colors: White Drive Duty: 1/64 Duty Pixels: 128x64 Panel Size: 26.70mm x 19.26mm x 1.85mm Active Area: 21.74mm x 11.2mm Pixel Size: 0.15mm x 0.15mm This OLED Part No. is UG-2864HSWEG01. Not UG-2864AMBAG01. Note: If you decide to buy OLED display. You must confirm that you can make it work by yourself, we'll haven't any technology support except all the datasheet. Thanks for your understanding and support. Needn't backlight. The display unit can self-luminous High resolution: 128* 64 Viewing angle: 160 ° Supports many control chip: Fully compatible with Arduino. 51 Series, MSP430 Series, STM32/ 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: 30 ℃ ~ 70 ℃ Module Size: 27.0MM* 27.0MM* 4.1MM I2C/IIC Interface. Need 2 IO only. Driver IC: SSD1306 Note: This item come I2C/IIC interface only. Because the hardware reasons. Resulting IIC/I2C bus no ACK response signal, so IIC IIC communication Whitby automated production of OLED modules instead of the standard version. But this can be solved by software. published here for the Arduino library file, you can make this OLED module used in the Arduino system. File description: IIC_without_ACK.cpp- SSD1306 drivers; IIC_without_ACK.h- SSD1306 driver file header; oledfont.c- matrix table( you need to display the contents of the matrix can be calculated by taking the modulus of software after adding this file. Modulo the way" common cathode- out line- Reverse Output" font will take up a lot of space FLASH, please comment out the unwanted font, so there will be enough space Arduino tips) Function: Write_IIC_Byte(unsigned char IIC_Byte) by IIC write an 8-bit data( such as 0xff) Write_IIC_Command(unsigned char IIC_Command) write command to the OLED module through IIC bus Begin_IIC_Da
$
12.72
Buy It Now
$2.99 Shipping
Condition: New
Location: China
$
16.29
Buy It Now
$3.40 Shipping
Condition: New
Location: China
Driver IC: SSD1306. 1/2/5PCS 128x64 White LED display module for Arduino. Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, ... moreetc. Interface type isIIC. Ultra-low power consumption: full screen lit 0.08W.
$
2.21
Buy It Now
Free Shipping
Condition: New
Location: China
$
0.99
Buy It Now
$3.00 Shipping
Condition: New
Location: China
This is another great IIC/I2C/TWI/SPI Serial Interface. However, with this I2C interface module, you will be able to realize data display via only 2 wires. ... moreIf you already has I2C devices in your project, this LCD module actually cost no more resources at all.
$
16.40
Buy It Now
$2.86 Shipping
Condition: New
Location: China
$
13.89
Buy It Now
Free Shipping
Condition: New
Location: China
5 PCS TCS3472 Color Sensor Recognition Module RGB IIC with IR Filter for Arduino STM32 Description: This module is based on the AMS TCS3472XFN color light ... moredigitizer as the core color sensor. The sensor provides digital output of Red, Green, Blue (RGB) and clear light sensing values. The integrated IR blocking filter minimizes the IR spectral component of the incident light and allows for accurate color measurement. Communication via I2C interface. Product Parameters: Operating voltage: 3.3V/5V Control chip: TCS3472XFN Logic voltage: 3.3V/5V Communication interface: I2C Package Included: 5 X TCS3472 Sensor Module(Double orifice version) See more in the flyfuntech2022.
$
4.97
Buy It Now
$3.00 Shipping
Condition: New
Location: China
Since this LCD only supports 3.3V I0 level, when using the UNO system board, as UNO can only be set as push-pull output, its L0 maximum output is 5V 30mA, ... morewhich will lead to LCD level identification error and even burn the LCD screen.
$
17.88
Buy It Now
$3.00 Shipping
Condition: New
Location: China
Resolution 480 320 (Pixel). Module Interface 8Bit or 16Bit parallel interface. Supports 8-bit and 16-bit parallel bus transmission with fast transfer ... morespeed. Module PCB Size 61.54x105.69 (mm). Available on C51 and STM32 platforms with a rich sample program.
$
4.77
Buy It Now
Free Shipping
Condition: New
Location: China
UPC Does not apply Country/Region of Manufacture China MPN Does not apply Brand Unbranded/Generic Model 1602 LCD ----------WholeSale----------- 10X=Free ... moreTracking Number!!!!!.
$
5.47
Buy It Now
$2.51 Shipping
Condition: New
Location: China
Since this LCD only supports 3.3V I0 level, when using the UNO system board, as UNO can only be set as push-pull output, its L0 maximum output is 5V 30mA, ... morewhich will lead to LCD level identification error and even burn the LCD screen.
$
5.68
Buy It Now
$2.99 Shipping
Condition: New
Location: China
$
25.99
Buy It Now
Free Shipping
Condition: New
Location: Milner, United States
Includes built-in OLED screen - easy to set up. On YouTube look for video wRW32gTLsKE and its corresponding GitHub project ESP32_Youtube_OLED. CNC & 3D ... morePrinting.
$
48.90
Buy It Now
Free Shipping
Condition: New
Location: North Liberty, United States
MaTouch ESP32-S3 Parallel TFT with Touch 7“. There is an onboard SD card to make it possible to record/play filed data. Also, there are 2 Mabee/ Grove ... moreconnectors, so the users can instantly connect kinds of sensors to this board to create personal prototype projects.
$
7.11
Buy It Now
$2.99 Shipping
Condition: New
Location: China
Dot matrix: 128X64. Window size: 39.8X25.5. Display color: black on white. Model: 12864G-086-P.
$
7.11
Buy It Now
$2.58 Shipping
Condition: Neu
Location: China
It's 4-wire serial spi interface with pin header connection. Of course, we wouldn't just leave you with a datasheet and a "good luck!". Interface4-Wire ... moreSerial SPI. Gross Weight (kg)0.0220. Part NumberER-TFTM1.54-1.
$
2.99
Buy It Now
$3.20 Shipping
Condition: New
Location: China
1 Nokia 5110 LCD Bare Screen 84 48 (NO PCB) for Arduino AVR PIC STM32. Use serial interface communicate with the master processor,the number of interface ... moresignal line reduced. LCD5110 Module 84 X 48 dot matrix LCD,can show 4 lines of characters.
$
6.58
Buy It Now
$2.81 Shipping
Condition: Neu
Location: China
The screen's headers are designed to fit into the socket on the front of Esplora, but it is compatible with any AVR-based (Uno, Leonardo), Datasheet You ... morecan use this module with Esplora. About the Arduino Esplora.
$
8.65
Buy It Now
$31.33 Shipping
Condition: Neu
Location: Overbruch,-Vierlinden, Germany
Treiber: TB6612FNG. Kabel / Stecker / Buchsen. 10x Bananenbuchse 4mm Laborbuchse Banane Einbau. 4,99 EUR. CC1101 868MHZ Wireless Funk Transceiver Modul ... moreF. Doppel BTS7960 Motortreiber H-Bridge 43A Motor. 13,90 EUR.
$
13.94
Buy It Now
$2.58 Shipping
Condition: Neu
Location: China
LCD Information .
$
4.98
Buy It Now
$3.00 Shipping
Condition: New
Location: China
Since this LCD only supports 3.3V I0 level, when using the UNO system board, as UNO can only be set as push-pull output, its L0 maximum output is 5V 30mA, ... morewhich will lead to LCD level identification error and even burn the LCD screen.
$
26.67
Buy It Now
$3.50 Shipping
Condition: New
Location: China
XY6015L Board. Output power: 0~900W. Output power: 0~1200W. Output current: 0~15.00A. Output ripple typical value: 100mv VPP. Output over power protection: ... more0-950W default 950W. Complete display, simple operation, stable performance.
$
5.82
Buy It Now
Free Shipping
Condition: New
Location: China
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
Sieko L4044 STN ARDUINO LCD Display Module 5v 40 Char. 4 Lines
Sieko L4044 STN LCD Display Module 5v 40 Char. 4 Lines Please review all pictures before bidding. Shipping to greater 48 only. Images hosted by:
Kyocera Farb LCD-Display 8,5" 800x480dpi WVGA Raspberry Pi & Arduino
Hallo, Zum verkauf steht ein 8.5 Zoll Fard LCD Display. Ich habe beim aufräumen in meinen Bastelkisten dieses Display gefunden. Ich wollte sie ursprünglich mal in einem meiner Mikrocontroller Experimente verwenden. Nur leider fehlt mir die Zeit und das Wissen. Leider kann ich dazu nicht viele angaben machen. Auf dem Display steht Kyocera TCG085WV-1AA-G00. Die Auflösung beträgt 800x480dpi. Der Anschluß fürs Display ist 40 polig. Für den Anschluss vom Inverter und vom LCD lege ich eine Pinbelegung bei. Ein Datenblatt für die Ansteuerung habe ich leider nicht. Zum Lieferumfang gehören: Display mit Folienkabel und Inverter fürs Display. Der Verkauf erfolgt als Bastlerware. Alle genannten Firmen- u. Markennahmen sind Eigentum des Rechtsinhabers. Sie dienen lediglich der Artikelbeschreibung. Aufgrund ... moredes aktuellen EU-Rechts weise ich ausdrücklich darauf hin. Dass es sich hier um eine Privatauktion handelt. Sämtliche Gewährleistungs- und Garantieansprüche, sowie eine Rücknahme der ersteigerten oder gekauften Artikel sind ausgeschlossen. Rechtlich geschützte Markennamen werden nur dann verwendet, wenn sie ein Bestandteil des Produktes sind. Der Artikel wird so verkauft wie er beschrieben oder abgebildet ist.Alle Angaben erfolgten nach besten Wissen und Gewissen, ohne Gewähr für die Richtigkeit. Der Käufer ist verpflichtet, sich vor Abgabe eines Gebotes alle für ihn relevante Infos zu besorgen und evtl. Unklarheiten zu beseitigen. Die Ebay gebühren Trage ich die Verpackungs- und Versandkosten der Käufer. Bieten oder Kaufen Sie nur wenn Sie mit diesen Regeln einverstanden sind.
Blau / Weiß LCD-Display GLCD STN mit Keypad & Touchscreen Raspberry Pi & Arduino
Hallo, Zum verkauf steht Monochromes LCD Display mit Touchscreen und Tastatur Keypad. Leider kann ich zum Display nicht viele angaben machen. Es ist eher was für findige Bastler Auf dem Display steht LSUGC2131A. Wie hoch die Auflösung weiß ich leider nicht genau. Aber wenn man die pixel je Centimeter hochrechnet kommt man auf 420 x 160 pixcel. Die Darstellung ist Blau auf Weiß. Zum Display gehört ein Touchscreen sowie eine Platine mit Inverter und 19 Tastern und 5 LED's. Das LCD hat ein 12 poliges Kabel. Der Touch 4 und die Platine 15 pins. Eine Anschlussbelegung für LCD und Platine lege ich bei. Ein Datenblatt habe ich leider nicht. Die Platine ist 12x13cm und das Display 27x11cm die Anzeigefläche 21.5x8,5cm. Pinbelegung LCD: Pin 1- LCD Frame p2- LCD LOAD p3- LCD CP p4- LCD VSS GND p5- LCD VDD 5V+ p6- ... moreLCD VSS GND p7- LCD Control p8- LCD Disp Off p9- D0 p10- D1 p11- D2 p12- D3. Zum Lieferumfang gehören: Display mit Kabel. Touchscreen und Inverterplatine fürs Display. Der Verkauf erfolgt als Bastlerware. Alle genannten Firmen- u. Markennahmen sind Eigentum des Rechtsinhabers. Sie dienen lediglich der Artikelbeschreibung. Aufgrund des aktuellen EU-Rechts weise ich ausdrücklich darauf hin. Dass es sich hier um eine Privatauktion handelt. Sämtliche Gewährleistungs- und Garantieansprüche, sowie eine Rücknahme der ersteigerten oder gekauften Artikel sind ausgeschlossen. Rechtlich geschützte Markennamen werden nur dann verwendet, wenn sie ein Bestandteil des Produktes sind. Der Artikel wird so verkauft wie er beschrieben oder abgebildet ist.Alle Angaben erfolgten nach besten Wissen und Gewissen, ohne Gewähr für die Richtigkeit. Der Käufer ist verpflichtet, sich vor Abgabe eines Gebotes alle für ihn relevante Infos zu besorgen und evtl. Unklarheiten zu beseitigen. Die Ebay gebühren Trage ich die Verpackungs- und Versandkosten der Käufer. Bieten oder Kaufen Sie nur wenn Sie mit diesen Regeln einverstanden sind.
40x4 Four Line LCD Display with Yellow Green Backlight Arduino 4x40
I have a limited supply of 40x4 backlit LCD's that would be great for your next Arduino project. These were removed from working surplus equipment and may have minor scuffs or scratches but each one is in good working condition and tested before it is sent out. There are a couple of different models. Some have black bezels, and some have silver bezels, but all are compatible with HDM40416L-4-L30P displays. They will come with a 16-Pin ribbon connector stub approx 8" long. You'll need to solder on some header pins or solder it directly to a breadboard with appropriate connections to the Arduino) Tested with the Arduino UNO(see example setup below) but should work with any Arduino provided you adjust the pin connections accordingly. Note: In the example setup. I have the backlight connected directly to the 5V supply, but I highly ... morerecommend putting about a 6.8Ω current limiting resistor in series with it ESPECIALLY if you plan on controlling it with the Arduino. On my test setup, various displays pulled around 300mA when connected directly to 5V. A 6.8Ω resistor should drop it down into the 100-150mA range. For best results, test your specific device's backlight current drain. You can always wire up a transistor switch if you're leary about the current draw) You will need a 10K pot for contrast adjustment and you should also install a copy of the- There is one minor difference between the datasheet and these displays. On the datasheet. The display has an 18-pin connector with pins 17-18 used for the backlight. This device has a 16-pin connector with solder connections for the backlight on the opposite end. FREE Domestic First Class Shipping. Email for international shipping cost. Sample Setup: Arduino and Breadboard NOT included! Ribbon Cable/Connector Signal chart: LCD Color 1* Color 2* Signal. Arduino Uno Pin. Notes. 1. Red. Green. D7. 5. 2. Brown. Blue. D6. 4. 3. Yellow. Orange. D5. 3. 4. Orange. Yellow. D4. 2. 5. Blue. Brown. D3. Not used in Example. 6. Green. Red. D2. Not used in Example. 7
HP Photosmart C6300 Replacement LCD Display - Arduino - PIC -PI
Here we have a replacement display screen from a HP Hewlett Packard Photo Smart C6300 series of multi function printers. This item has been fully tested. Please take a moment to read All items are salvaged from working equipment. I tear down hi end test and medical equipment. Definition as tested in my listings: Individual components are pulled from working equipment and are tested. Boards, displays and IC's are fully working before removal. Static sensitive devices are pulled using the correct equipment and stored correctly. Items do not come with data sheets or any other information although I will try list most component ID's. Most items may require you to be a little creative to allow integration into your project but that's the fun of it all. Everything posted has tracking and requires a signature for your peace of mind. ... morePostage is always combined so if you win more than one item please wait for an invoice. Overseas bidders are welcome but please ask for a quote before the item ends. Not after. Overseas items will require insurance and tracking, NO exceptions. Finally everything is posted quickly. Usually the next working day. Feedback is left once received, Good luck and happy bidding. IF YOU DON'T PAY WITHIN 3 DAYS I WILL OPEN A NON PAYING BIDDER CASE SORRY NO ZERO RATED BIDDERS. I KNOW WE ALL NEED TO START SOMEWHERE BUT I'M HAVING TOO MUCH HASSLE WITH NON PAYING ZERO RATED BIDDERS.
5 Pcs 84*48 Nokia 5110 LCD Module Black on Blue backlight For Arduino 84X48
NY PLATFORM products MAINLY INCLUDE Regulated DC Power Supply. Switching Power supply, Power Inverter, Soldering/Rework Station, SMD Hot air rework station, SMD Antistatic Lead free soldering station& Accessories, Digital Storage Oscilloscopes, Testing meters and instruments& Accessories, Power Tool Battery& Accessory etc. NY PLATFORM SUPPLIES HIGH-quality products. PROVIDES specialty technical support and DELIVERS SERVICE GUARANTEES TO ENSURE CUSTOMER SATISFACTION. WITH THESE competitive advantages, WE NOT ONLY continue to broaden product CATEGORIES to LEAD in highly competitive marketS, BUT ALSO SUCCEED to STRENGTHEN OUR PARTNERSHIPS WITH VARIOUS CHANNELS IN emerging marketS. AS ALWAYS, We strive to OFFER our customers THE BEST integrated solutionS and BEST-IN-CLASS service. 84 X 48 DOTS LCD Display Module. These displays were ... moreused in old Nokia 5110/3310 cell phones. It is a 84x48 pixel monochrome LCD display. These displays are small. But very readable and come with backlight. This display is made of 84x48 individual pixels, so you can use it for graphics, text or bitmaps. These displays are inexpensive, easy to use, require only a few digital I/O pins and are fairly low power as well. THERE ARE SOME SCRATCHES ON THE METAL SHELL EVEN ON THE SCREEN LIKE THE PHOTO SHOWING. It's compatible with Nokia 3310. The code is the same for Nokia 3310 and 5110, so there is the ready-made arduino library for this LCD. Nokia 5110 LCD is a 84*48 pixels matrix LCD. Black text on Blue background. Nokia 5110 LCD is low-cost. Monochrome LCD with 84x48 display. It is popular for 8-bit AVR/PIC projects, search google for'Nokia 5510 LCD' and you will find lots of resources. Note:The Blue backlight LCM's pin compare with White backligt LCM's on the opposite. 84 X 48 DOTS LCD Display Module x5, To international buyer: Please note. We do fast shipping in one business day but sometimes the USPS international shipping take 25-30 days to finish the delivery as the package MAY BE INSPECTED BY BOTH CUSTOMS, s
Large Graphical Wide Screen LCD - Arduino - PIC - PI
Here we have a large graphical wide screen display module. Please take a moment to read All items are salvaged from working equipment. I tear down hi end test and medical equipment. Definition as tested in my listings: Individual components are pulled from working equipment and are tested. Boards, displays and IC's are fully working before removal. Static sensitive devices are pulled using the correct equipment and stored correctly. Items do not come with data sheets or any other information although I will try list most component ID's. Most items may require you to be a little creative to allow integration into your project but that's the fun of it all. Everything posted has tracking and requires a signature for your peace of mind. Overseas bidders are welcome but please ask for a quote before the item ends. Not after. Overseas ... moreitems will require insurance and tracking, NO exceptions. Finally everything is posted quickly. Usually the next working day. Good luck and happy bidding. Postage is always combined so if you win more than one item please wait for an invoice. PLEASE LET ME KNOW IF YOU ARE WATCHING ANOTHER ITEM OTHERWISE IF YOU DON'T PAY WITHIN 3 DAYS I WILL OPEN A NON PAYING BIDDER CASE SORRY NO ZERO RATED BIDDERS. I KNOW WE ALL NEED TO START SOMEWHERE BUT I'M HAVING TOO MUCH HASSLE WITH NON PAYING ZERO RATED BIDDERS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-141db937653-0x100-
PCI PCIM 201 DOT MATRIX 2X16 LCD DYSPLAY MODULE HIGH CONTRAST 13 PINS ARDUINO
UP FOR SALE: Used-ORIGINAL-OBTAINED FROM GOVERNMENT SPARE SURPLUS(LANL) Note: This display never been used. Or mounted, selling used only just for minimal cosmetic ware. Display Was test it and working. Please look at the pictures May be good to interface with Arduino Controller PC-I PCIM 201 DOT MATRIX 2X16 LCD DYSPLAY MODULE HIGH CONTRAST 13 PINS ARDUINO PAYPAL FOR PAYMENT 30 DAYS RETURN BUY WITH CONFIDENCE $1.84 SHIPPING USPS BOXED PACKAGE TO THE CONTINENTAL US ONLY EMAIL FOR ANY QUESTION THANK YOU
Arduino compatible 128x64 Blue Backlit LCD
Standard glcd compatible 128x64 LCD for microcontrollers including Arduino compatibles. Used. In good condition I'll send you pinouts for the Arduino Mega. Or if you have a different model you can refer to the glcd documentation page. Ships via Canada Post Insurance quoted extra Posted with
Afficheur LCD 2x8 caractères YJ-802A Arduino Microcontrôleur Robot LCD screen
Afficheur LCD 2 x 8 caractères. YJ-802A. Modèle standard à matrices de points carrés. Utilisable avec les bibliothèques Arduino, etc. Brochage au dos. En très bon état. P rovient d'un appareil neuf défectueux. Dont l'affichage fonctionnait. Sur la photo l'aspect rayé est dû au film protecteur encore présent. Envoi soigné.
LCD Display for Arduino - 2 Lines and 24 Character Screen - Green Reclaimed Item
Two line display with 24 characters per line. Ships for FREE! Datasheet can be found here: View video of what this screen can be used for on Youtube: Uses the standard Arduino LiquidCrystal library and typical wiring as shown here: Image from Arduino.CC. The first product picture is an example of the item running. Arduino and other items are not included. All other pictures are of actual item only. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-145890ee2f6-0x109-
Matrix Orbital LK162-12-WB LCD DISPLAY MODULE; Arduino; LCDi2c Library
Matrix Orbital LK162-12-WB LCD DISPLAY MODULE 16 characters by 2 lines display Returnable if DOA(shipping is non-refundable) Product page: Display Appearance Character X Lines, Width x Height, 16 x 2 Module Size Width(mm) x Height(mm) x Thickness(mm) 80.00 x 36.00 x 28.82 Display Size Width(mm) x Height(mm) 64.50 x 15.50 Active Area, Width(mm) x Height(mm) 56.20 x 11.50 Character Size, Width x Height, 2.95 x 5.55 Character Pitch, Width x Height, 3.55 x 5.95 Pixel Size, Width x Height, 0.55 x 0.65 Pixel Pitch, Width x Height, 0.60 x 0.70 Text Color Red Background Color Black Features Interface Options, RS232TTL RS232 Keypad 12 Dallas One Wire N/A GPO 7 Buffer, 128 bytes, Environmental Conditions Operating Temp Min to Max, 0.00 o c to 50.00 o c Storage Temp, Min to Max, 20.00 o c to 70.00 o c Operating Temp(E) Min to Max, 20 o c to +70 o c ... moreStorage Temp(E) Min to Max, 30.00 o c to 80.00 o c Max Humidity 90% Power Requirements Supply Current 40 mA, Backlight Current 90 mA, Appears to be supported with ARDUINO/ LCDi2c Library: LCDi2c Library This is the home of the i2c character based LCD libraries Background: After looking at the display choices I decided I wanted to use a display that ran on the i2c buss. This takes up only two pins and is very fast. As there was no current library I decided to write one. And in turn am making it available to the Arduino community. API Compliance: I have also put together a recommended API for use when developing libraries for character based LCD displays. The character based documentation can be found here. Info on using with the library can be found here. Connecting your display Not done yet! Currently Supported displays: Display Compliant Library Connection F E, i2c, F E, i2c, F E, i2c, F E, i2c, F E, i2c, F E, i2c, F = Fully Supported P = Partially Supported D = Being Developed E = Extended Library Support Click on the library name to download the latest version of the library for your display Notes: The libraries as installed include the extended functions of e
Samsung 27 X 2 Line LCD - Header Plugged - Arduino - PIC - PI
Here we have a Samsung LCD display module. This unit displays 27 characters each line and can display two lines. I post my items quickly. The same day if possible if not the next working day. All items posted have tracking and this number is uploaded to PayPal. If applicable ESD precautions are observed and boards ect are pulled and stored correctly. If you buy more than one item that has free postage I will refund you the postage difference. Buy it now offers are accepted so please ask. Any and all questions please ask. Thank you for reading and happy ebaying.
Hyundai HG2450-4 LCD Display Module - TOSHIBA T6963C - Arduino - PIC - PI
Here we have a nice display module made by Hyundai. The display uses the Toshiba T6963C: http:forum.arduino.cc/index.php?topic=22624.0 This is a great board as there is room under the display to mount your project. Supplied in mint condition. Static bagged. I post my items quickly. The same day if possible if not the next working day. All items posted have tracking and this number is uploaded to PayPal. If applicable ESD precautions are observed and boards ect are pulled and stored correctly. If you buy more than one item that has free postage I will refund you the postage difference. Buy it now offers are accepted so please ask. Any and all questions please ask. Thank you for reading and happy ebaying. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-146e3cc28c3-0x10d-
ARDUINO Starter Kit for MEGA NANO UNO - Breadboard IR LED LCD Wires etc.
Starter Kit for ARDUINO UNO MEGA NANO Breadboard IR LED LCD Wires etc. Shipping Terms | Payment Details | Check Out Description 100% Brand New Arduino Starter Projects Kit: 1. 200 ohm resister x 10 2. 10K ohm resister x 10 3. 1602 LCD Module(green) x 1 4. 4 Digit 7 Segment LED x 1 5. 8x8 LED Matrix x 1 6. Mini Breadboard x 3 7. Infrared receiver x 1 8. Infrared remote control with battery x 1 9. Infrared sender LED x 1 10. Piezo Sounder x 1 11. Potentiometer x 1 12. Push Button x 10 13. Red LED x 10 14. Yellow LED x 10 15. Green LED x 10 16. Wires x 65 17. Header Pin x 1 Feel free to email us with any question you have. Shipping Terms SHIPPING DETAILS Flat shipping rate US$0.00 to all countries worldwide(USA. Canada, UK, Europe, Asian Countries, Hong Kong& China) We will ship out the items from HONG KONG within 2 working days after we ... morereceived the payment. We do not ship on Saturday, Sunday and public holidays. Insurance(aprox. US$1.30 per auction) is highly recommended or we will not responsible for all lost. Damaged and stolen items in transit. Shipping and Handling charges are not negotiable. We will send out a shipping notification email after we have shipped out the items. However. Please be aware that we cannot contact you or notify your shipment status if our email address is blocked by the Spam Blocker of your email server, or you are using a different email address from the email address you registered on Ebay. Local pick-up is not available. Payment Details PAYMENT DETAILS PAYPAL(Preferred) to our PayPal Email Address: We do not accept personal checks or others. No other payment methods are accepted. Bids and additional fees are quoted in US funds. Payment is expected in US funds. Check Out CHECKOUT DETAILS Buyers receive a Winning Bidder Notice Email after the auction close. If there are any problems with your order please contact us immediately and we will be happy to assist you. This item has been seen by people! inkFrog Analytics. RcmdId ViewItemDescV4,RlogId p4%60bo7%60j
Sharp LQ057Q3DC02 LCD TFT Display - 5.7" RGB Interface - Full Pin Outs - Arduino
Here we have an excellent little LCD TFT screen. This unit made by Sharp has a very easy to use RGB interface. The unit has a diagonal display of 5.7 inches or 14.4cm. Here is the full data sheet that has pin outs and everything you could possibly ever want to know about this display. http:datasheet.octopart.com/LQ057Q3DC02-Sharp-Microelectronics-datasheet-145509.pdf List price of £148 + vat! Supplied with flat flex and mounting hardware. I post my items quickly. The same day if possible if not the next working day. All items posted have tracking and this number is uploaded to PayPal. If applicable ESD precautions are observed and boards ect are pulled and stored correctly. Any and all questions please ask. Thank you for reading and happy ebaying.
Raspberry Pi communicate with Arduino Expansion GPIO SPI I2C UART xbee lcd pkg-B
Product Model: ARPI500 pkg-B(Inclucde 26 Items) ARPI500 pkg-B including: expansion board ARPI500. some Important modules like: I2C modules(PCF8574 IO Expansion Module, PCF8563 RTC Module)LCD1602, 2.2inch LCD(can run Raspbian OS)USB to UART(PL2303 module) some Basic modules like:User LEDs, Buzzer, Joystick/key, Infrared receiver.DS18B20,etc. other some Accessories like mini Breadboard, wires, connecting stand, etc Does not including the raspberry pi. Pi-camera and Arduino, Please purchase alone. More detailed description Please v iew' Package Contains' Overview: ARPI500 is a expansion Board for arduino and raspberry pi. It can make your raspberry Pi communicating with Arduino- Interface Module(include communicating With-Arduino) It can support simple expansion such as User LEDs, Buzzer, Joystick/key, Infrared receiver.DS18B20,etc. ... moreMore our module s such as RTC Module. I2C GPIO Expansion Module, USB TO UART Module can connect d irectly to your Pi though ARPI500 ARPI500 also su pport Xbee- Interface module. LCD1602 LCD12864 and TFT LCD will can run though A RPI500 sketch map: 1. User LEDs, Buzzer, Joystick/key, Infrared receiver.DS18B20 2. 3.3.V-5V Logic level conversion module 3. AS Xbee expansion Board for arduino and Raspberry Pi. AS Xbee Adapter 4. AS 8 SEG LED expansion Board for arduino and Raspberry Pi 5. LCD1602.12864 6. 2.2inch LCD run raspbian for raspberry Pi or run for arduino. 7. DIY Raspberry Pi WIFI Intelligent monitoring car 8.DIY Raspberry MP4 9. Rraspberry pi communicate WithArduino though 2.4G NRF24L01 10.ENC28J60 Module for Arduino 11.SD Expansion Module for Arduino 12. RTC Module. I2C GPIO Expansion Module, USB TO TTL/UART Expansion Module. 13. AS Breadboard 1 4. POWER Module: 5V 3A OUTPUT 1 5. DIY freedom: Development Resources The User Guide CD includes development resources listed as follow: User manual for Arduino and Raspberry Pi· Schematic(PDF) Demo codes for Arduinoo and Raspberry Pi· Development documentations· Raspbian(the configured system i
LCD Display Module - Display area 50 x 40 mm - Header Pinned - Arduino - PIC
Here we have a nice LCD graphical display module. The display area measures 50 x 40 mm. The board measures 90 x 60 mm. This has an Hitachi Chipset with Sony ram. Header pinned ready to use. I post my items quickly. The same day if possible if not the next working day. All items posted have tracking and this number is uploaded to PayPal. If applicable ESD precautions are observed and boards ect are pulled and stored correctly. If you buy more than one item that has free postage I will refund you the postage difference. Buy it now offers are accepted so please ask. Any and all questions please ask. Thank you for reading and happy ebaying. Any and all questions please ask.
LCD Graphic Display 128 X 64 Dots, Lumex Lcm-S12864GSF, Arduino DIY, Header Pins
Purchased this display a couple of years ago to tinker with and never got around to it. As can be seen in the photo. The display has header pins soldered to it for ease of use in a bread board or as a through hole component. It is in great shape and even still has the protective film over the display. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1476690c990-0x112-
Arduino Kit 40x2 SAMSUNG Character LCD Display + Keboard w/ IR USB PUSHBTN LEDS
BIDDING You are bidding on Character LCD Display Module + Keboard with IR(InfraRed) USB, PUSH BUTTON And LEDS LCD Made By: SAMSUMG Screen Size: 40x2 Character Chip On board: UC-40206( HD44780 COMPATIBLE- ARDUINO COMPATIBLE) Pin Configuration: 2* 7 Row Header(2mm/ 0.079" Pin Out: Pin Number, Pin Assignemnt, 1 GND, 2 Vcc(+5Vdc) 3 Vo(Brightness max 5V) 4 RS, 5 R/W, 6 Enable, 7 D0, 8 D1, 9 D2, 10 D3, 11 D4, 12 D5, 13 D6, 14, D7, VERY EASY ARDUINO/ MICROCONTROLLERS INTEGRATION! Integration Tutorial on Arduino: Don't hesitate contact us for help with this prduct! full product service! Keyoard from DVR unit Information: we don't have an electrical scheme. But we know the pinout and connections. Keyboard has Infrared Reciver. 3.5mm Audio Input. USB connetion breaked-out on board. 13*Push Button, 5*Blue Leds PCB has 3* 74HC164(Serial ... morein/Paralel Out) To control leds and detect button clicks(complex) Don't hesitate contact us for more information! for bigger quantities- mail us for more information Sold as is See pictures My Policies: If for any reason. You are not satisfied with your purchase please contact us immediately by Email or Phone, before contacting eBay Resolution center or Leaving Feedback! If the item describe"as is" There will be no returns unless it is"not as describe" issue. The main title dose not necessarily describe the item. If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! Please note that we work 6 days a week between: 5:00AM(GMT) 14:30(GMT) Sunday to Friday. PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. NOTE for Israeli buyers: The price does not include V.A.T. Please contact us for shipping + V.A.T. SHIPPING Shipping options: Registered. EMS, UPS, FedEx Buyer will pay actual postage char
Arduino TinkerKit 16x2 Text Display LCD Module Shield T110061
Browse our Store. Sports& Outdoors Video Games Home& Garden Health& Beauty Clothing. Shoes& Accessories Electronics Musical Instruments/Gear Cameras& Photo Customer Service. Today's Hot Deals Arduino TinkerKit 16x2 Text Display LCD Module Shield T110061(64173) P1878172) PACKAGE CONDITION: Opened manufacturer's packaging FUNCTIONAL CONDITION: 100% Fully Functional COSMETIC CONDITION: Looks lightly used ITEMS INCLUDED: TinkerKit 16x2 Text LCD Shield ITEMS KNOWN TO BE MISSING: PLEASE SEE PHOTOS FOR WHAT IS INCLUDED. Please do NOT ASSUME an item is included if it is not in the photo. SPECIFICATIONS: With the TKLCD module you can write text on the module's screen in a few minutes. It has an LCD display on board and it requires a dedicated software library that is available on. COLOR: With the TKLCD module you can ... morewrite text on the module's screen in a few minutes. It has an LCD display on board and it requires a dedicated software library that is available on. Arkansas Buyers must pay a 6% Sales Tax. Click an Image to Enlarge Some images may be stock photos. Please read ITEM DESCRIPTION. ABOUT US bigdealonthehill has partnered with some of the Nation's largest retailers and distributors to aggressively liquidate consumer merchandise. This merchandise is generally customer returns. Overstock items, refurbished or even brand new unused retail shelf pulls. Please note: If the item is a known refurbished item, it will be stated in the listing as well as any other condition known. Also, we do offer BRAND NEW merchandise on some of our other listings. Please see auction condition for details. WHY BUY FROM US? WE WORK FOR YOU. ALL merchandise is tested prior to listing unless it is sealed in the factory package. This will include powering on the unit and checking all the major functions. You will find condition and testing notes in the item description. This helps our buyers know EXACTLY what they are getting. WE EARN YOUR BUSINESS. We have worked with thousands of ebay members to achi
Sainsmart 3.2" TFT LCD Display Module with SD slot for Arduino AS IS READ
This was new and unused when I noticed through the packaging that the screen was cracked. I opened it to check it out and it looks like only the glass panel is cracked. NOT the LCD.
Arduino 7" TFT LCD Display - ColdTears CTE70
This is a CTE 7" TFT LCD display I bought for a project but never used it. So technically it is brand new. Comes in original box and packaging. It does NOT come with a shield board. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-147d9cb4a6e-0x108-
28 LCD Screen Key Matrix - Micro Sized LCD Screen Switch - Arduino
Here we a matrix of 28 Miniature LCD screens. Each miniature LCD screens is housed in a switch. Keep it to use as a whole or separate for individual projects. I post my items quickly. The same day if possible if not the next working day. All items posted have tracking and this number is uploaded to PayPal. If applicable ESD precautions are observed and boards ect are pulled and stored correctly. Any and all questions please ask. Thank you for reading and happy ebaying. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-1484036edd9-0x10b-
Arduino Uno Starter Kit (UNO, Ethernet Shield, LCD display)
I'm looking to sell a"starter kit" for the Arduino Uno. I bought these items thinking I'd make some time to learn and tinker with it. But these have just sat on my desk instead. Looking to sell them to another tinkerer who can use them to their full potential. The set includes: SainSmart UNO. ATmega328P, SainSmart Ethernet Shield W5100, SainSmart IIC/I2C/TWI Serial 2004 20x4 LCD Module Shield, Radio Shack Sidekick Basic Kit for Arduino, All of these are in good working order and the Sidekick bundle has all the original supplies the kit came with.
Arduino UNO TFT LCD adapter TFT01 shield V2.0
This Arduino UNO TFT LCD adapter TFT01 shield V2.0 was purchased for. But it did not work with the LCD display I was trying to get to work. This adapter only works with a limited number of LCD's and it uses every pin on the Arduino Uno. Be sure to check out my book"Arduino LCD Projects" in another auction. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-149425f7d0b-0x116-
Arduino Mega + Arduino Micro w / RGB LCD Shield made by Adafruit Industries
These are Official Arduino Boards. Both the Mega and the Micro were bought at Radio Shack within the past couple of years and have been used very little. I am also including a RGB Shield Kit from Adafruit(complete! in for Free! What you see is what you get in the pictures!
Arduino Arduino Uno Ultimate Starter Kit + LCD Module -- Used
All original parts are still in the box and it works like new. I'm including three spools of wire(that didn't originally come with the kit)
LCD Touch Module Resistive Arduino Raspberry PI
LCD touch module arduino raspberry Pi. Salvaged from an old printer.
2" LCD TCL-1008 Display (12 ea) Ten pin control Sanyo LC7582 CMOS driver Arduino
2" LCD on TCL-1008 Display Board Twelve(12) Pieces as one sale Ten pin control using Sanyo LC7582 CMOS driver Measure 2" x 1-1/2" Takeouts from High tech Instrumentation Guaranteed to function as intended
Lot of Arduino & Netduino & Esduino w/ Solar, Ethernet, Power, IO, & LCD shields
Esduino(by Technological Arts) with USB2MCU Netduino(program with VB.net c# ATMEGA 1280 prototyping platform HanRun Arduino Ethernet Shield Solar charger shield 2 x Womarts ScrewShields LCD Keypad shield(Green) LCD Keypad Shield(Blue) DFRduino I/O expansion shield
LCD Display Module with backlight for Arduino or other DIY projects
Good Display. There is stuff on the display in the photo. Display doesn't have any scratches.
Arduino compatible Geiger counter /w LCD shield, tube, and battery
You are bidding on a DIY Arduino based geiger counter kit consisting of the following.Assembled DIY Arduino geiger counter with LCD shield. SBM-20 geiger tube, 500 mahr Li-Poly battery and charger, battery voltmeter, SONY IR remote for software setting and two toggle switches, one for power and one for battery select, included are various connectors to complete the kit.This kit will require a bit of soldering to complete the power circuit and battery charge circuit, other than that it is pretty much ready to go. I will include all the documentation recv'd with the original kit, and a schematic for battery hookup.Being sold as is. No international bids.For additional info Google DIY Geiger Counter Home- Google Sites
Adafruit 2.8" TFT LCD Touch Screen Shield with Capacitive Touch for Arduino
Up for auction is a Adafruit 2.8 and TFT touch shield with Micro SD card reader. The shield works perfectly and is good shape with just minor scratcheson the screen(see photo) This shield retails on Adafruit's website for $60.00! Spice up your Arduino project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big(2.8" diagonal) bright(4 white-LED backlight) and colorful(18-bit 262.000 different shades) 240x320 pixels with individual pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. The shield is fully assembled. Tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library- you'll ... morehave it running in under 10 minutes! Works best with any classic Arduino(UNO/Duemilanove/Diecimila) This shield does work with the Mega Arduinos but its going to be half the speed of the Uno-type boards because of the way the Mega rearranges all the pins(there is no way to get around this! This shield is not Leonardo-compatible This display shield has a controller built into it with RAM buffering. So that almost no work is done by the microcontroller. The shield does require a lot of pins: 12 lines total for the display, 13 total if you use the microSD card
LCD 24X2 Character Display Arduino Hitachi HD44780 Compatible 2402 2002 1602
Arduino Hitacho LCD display. 24 X 2 size. Tested and working. U04-C-S02-003 ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-14be3a9fe8b-0x11a-