|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Bosque Farms, United States Do not have the proper power or knowledge to try it out. We do not have power cords to provide unless they are attached to the item or unless stated that ... morethey are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Buy It Now
Free Shipping Condition: Used Location: Hollister, United States The unit shows signs of use, such as, minor scuffing. These products are subject to export restrictions under U.S. law.
Buy It Now
Free Shipping Condition: New Location: San Jose, United States RF Front end is our own longer reach (>6") design with better functionality. RF noise probing. 10+ More units available price is per One Unit.
Buy It Now
Condition: For parts or not working Location: Gilroy, United States For all Texas orders, the rate of 8.25% will be applied.
Buy It Now
$5600.00 Shipping Condition: Used Location: Livermore, United States TWO(2) TEL P8 AUTOMATIC WAFER PROBERS w/ 2) TEL THERMO GENERATORS D204 Up for bid in this auction are(2) TEL P8 Automatic Wafer Probers along with(2) ... moreTEL D204 Thermo Generators. One of the units is fully functional and the other was listed as inactive. Both units are complete with all their parts and although both may work properly. I am selling them as(1) working unit and(1) spare unit that may or may not be fully functional. These were recently removed from a factory floor and were in great cosmetic condition, however after the shipping company got them over to me the front doors and exterior on both units got a little banged up. Included is a Hot/Cold chuck, software disks, and extra hosing(not pictured) Both units have the display monitor, it just got cut off in the 2nd photo. Buyer pays $200 for packing PLUS ACTUAL SHIPPING cost. CA residents pay CA sales tax(exemption permits welcome) Please E-mail me any questions or I can be reached at 323-664-8655.
Buy It Now
Condition: Seller refurbished Location: Palisades Park, United States Excellent Condition. We are minutes from Manhattan, and local to all 3 New York City Area Airports. Assorted chucks available including hot chucks.
Buy It Now
$700.00 Shipping Condition: Used Location: Ventura, United States Click here to see description.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States It is in good physical condition, but there may be signs of previous use and handling. These products are subject to export restrictions under U.S. law. ... moreSerial numbers or country of manufacture may vary.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Cascade Microtech S300 semi-automatic and manual RF/Microwave Probing System. The S300 supports wafer sizes and shards from 0.5 in. (1 mm) all the way ... moreup to 12 in.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Temperature Range: -10°C to +200°C. 8” (203mm) chuck with 3/8” (1cm) Z-travel. Mitutoyo microscope with two long working distance objectives 2X and 10X. ... moreInventory No. 64800.
Buy It Now
$43.00 Shipping Condition: Seller refurbished Location: San Jose, United States RF Front end is our own longer reach (3.5") design with better functionality. RF noise probing. Available Now at 3.5" Arm. 10+ More units available price ... moreis per One Unit. Base footprint: 1.50" X 2.00".
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Manual quick lift platen. Mitutoyo microscope with single long working distance objective.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States System/Tool: P-8 Wafer Prober. It was removed from a P-8 tool. Part No: P-8 Tray Loader Assembly.
Buy It Now
$17.00 Shipping Condition: Used Location: Killeen, United States
Buy It Now
Free Shipping Condition: Used Location: Killeen, United States Model: PURF3-r/2L81-050097-31.
Buy It Now
Free Shipping Condition: Used Location: Killeen, United States
Buy It Now
$139.22 Shipping Condition: New – Open box Location: Phoenix, United States 29 pt RTD Sensors. Connection: D-type, high density, sub-miniature with 64 pins. (2 connectors for 18-34 sensors per wafer.). Wafer Size: 300 mm. Accessories ... morewith the Process Probe Lead Materials: Polyimide coated copper.
Buy It Now
Condition: Used Location: Singapore WENTWORTH LABS 6" MANUAL PROBE STATION/ WAFER PROBER (MITUTOYO MICROSCOPE) w/ TEMPTRONIC THERMO CHUCK. Type: Manual Probe Station/ Wafer Prober. Mitutoyo ... moreWF Trinocular Phototube/ Head. (1 pair) Mitutoyo WF 10x/24 Eyepieces.
Buy It Now
Free Shipping Condition: Used Location: Rancho Cordova, United States This Wafer Prober Stage Part has been removed from a fully operational system and is confirmed to be fully functional. It is in good overall physical ... morecondition, though please note it exhibits some scuffs and scratches from previous use. We provide 30-Day Warranty. If you encounter any issues within the warranty period, please contact us for assistance. Please note, there is no power supply or power cord included. Please review the provided images for a better understanding of the item's condition. If you have any questions or need additional information, please feel free to contact us.
Buy It Now
$20.00 Shipping Condition: New Location: San Jose, United States C99729 Electroglas 266067-001 Rev. B RDC 8" Wafer Prober Gold Vacuum Hot Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) ... moreClick to Enlarge) Product ID# C99729 This Electroglas 266069-001 Rev. A 8" Wafer Gold Vacuum Hot Chuck looks to be in very good cosmetic condition. Possibly unused. However, I have no way of testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 11"L x 11"W x 3"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $22.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 5.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state tax rate applies. Or
Buy It Now
Condition: Seller refurbished Location: Freehold, United States
Buy It Now
$43.00 Shipping Condition: Seller refurbished Location: San Jose, United States RF Front end is our own longer reach (>6") design with better functionality. RF noise probing. 10+ More units available price is per One Unit. Base footprint: ... more1.50" X 2.00". this positioner with probers Including.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: RMHM4. This Electroglas RMHM4 is used working surplus. The physical condition is good, but there are signs of previous use and handling. Part ... moreNo: 247225-002, XFR Arm Subsystem. Part No: 247219-002, Prealign Subsystem.
Buy It Now
$15.00 Shipping Condition: New Location: Crystal Lake, United States Up for sale is one new and unused, as I know it, un tested and will be sold in new and working order featuring a GGB 40A-SG-150-PW prober probe tip. See ... morepictures for details and add 15.00 for shipping fedex ground within the continental USA not including Alaska, Canada, Mexico, HI, PR or any out of country shipments. Extra charges apply.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Electroglas 255901-001 is used working surplus. The physical condition is good, but there are signs of previous use and handling. Installed Part ... moreNumbers.
Buy It Now
Condition: For parts or not working Location: Singapore Model: 2001X. Make: Electroglas. Type: Wafer Prober. Vision Module PRM-2.
Buy It Now
Free Shipping Condition: New Location: Valencia, United States
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Platen accepts vacuum or magnetic base probe manipulators. Linear platen lift. Mitutoyo Microzoom microscope with two long working distance objectives.
Buy It Now
$89.69 Shipping Condition: Used Location: Las Vegas, United States The MicroZoom Probe Station is also included, making it a complete setup for all your probing needs. This item is used, but it's still in great working ... morecondition.
Buy It Now
$20.00 Shipping Condition: Used Location: Temple, United States Uniwire SystemChannel Interface Module. Model: UI-120A I/O.
Buy It Now
Free Shipping Condition: Used Location: Killeen, United States
Buy It Now
Free Shipping Condition: Used Location: Temple, United States
Buy It Now
Condition: For parts or not working Location: Gilroy, United States
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Steel platen accepts DC/HP/CAP Positioners (magnetic or vacuum mount). Mitutoyo Microscope with three long working distance objectives, 2x, 10x, 20x and ... more10x eyepieces.
Buy It Now
Condition: Seller refurbished Location: Palisades Park, United States Wentworth Labs P M L 8000. Analytical Manual Probe Station. (A - Right Rear ). Fiber Optic Illumination. 10x Eye pie ces / 10x & 20x Objectives.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. Model No: BPB IIb. These products are subject to export restrictions ... moreunder U.S. law. Serial numbers or country of manufacture may vary.
Buy It Now
Free Shipping Condition: Used Location: Corona, United States
Buy It Now
Condition: Used Location: Freehold, United States Light tight enclosure for wafer probers. Easy lift front panel. Cable ports on both sides of box.
Buy It Now
Free Shipping Condition: Used Location: Temple, United States Serial numbers or country of manufacture may vary. Sale Details.
Buy It Now
$30.00 Shipping Condition: Used Location: Mesa, United States You are buying one Electroglas Horizon 4085X 200mm Wafer Handling Assembly Linear Actuator Probe 8". This unit was removed from an Electroglas Horizon ... more4085X Wafer Prober. (MWHALL 9TOP)(JL).
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Tokyo Electron wafer indexer assembly is used, working surplus. It was removed from a P-8 automatic prober tool. System/Tool: P-8 Wafer Prober. Part ... moreNo: 200mm Wafer Indexer Assembly.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. Model No: DP. These products are subject to export restrictions under ... moreU.S. law. Serial numbers or country of manufacture may vary.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Model No: TVB3102-1/SIO. The physical condition is good, but there are signs of previous use and handling. These products are subject to export restrictions ... moreunder U.S. law. Serial numbers or country of manufacture may vary.
Buy It Now
$37.00 Shipping Condition: Seller refurbished Location: San Jose, United States THz, source/load pull, RF noise probing. Only one unit available price is per One. Feature resolution 3 µm Travel range. San Jose, California 95131 USA. ... moreHigh-performance versatile wafer-level reliability probing.
Buy It Now
Condition: For parts or not working Location: Madison, United States Micromanipulator Co. Model 6000 Prober Wafer Probe Station. AS IS - has not been tested in-house. Includes the entire pictured assembly with pictured ... morecomponents.
Buy It Now
$11.00 Shipping Condition: New Location: Crystal Lake, United States Up for sale is a new and unused as I know it, sold as pictured, un tested and will be sold in new and working order featuring a GGB 18B-4-50 probe tip.
Buy It Now
Free Shipping Condition: New – Open box Location: Albuquerque, United States They are in excellent physical condition. These products are subject to export restrictions under U.S. law. Sales Detail. Inventory # K-173. Female VCR ... moreInterfaces.
Buy It Now
$700.00 Shipping Condition: For parts or not working Location: Ventura, United States Click here to see description.
Buy It Now
Condition: For parts or not working Location: Freehold, United States MPI Corp. LEDA-8F 3G Plus-V 110 LED Prober Station Inventory# 58957*Before purchasing this system. Please note that the refurbishment process does not ... morebegin until the equipment has been purchased. Please contact us for lead-time. 3G Plus-V is a wafer prober for testing diced die on stretch frame(dies on blue tape mounted on a tape ring) Wafers cut. Broken by scribing, laser etc. and then expanded on stretch frame. May be tested to determine if any secondary operations have damaged the product. The maximum test area for the system is 6 inches of active die area or smaller. Machine Features: 3G Plus-V provides the functions of die position information saving. Auto-probing, testing etc. It contains these advantages: Automatic diced wafer alignment. Rapid pre-scan provides fast die position information speeding test and increasing throughput. Probe station for testing LED light emitting diodes. Compact rigid and reliable semiautomatic chip probing system. PC controller. 5 in. dia. vacuum chuck. Four precision probe manipulators. StereoZoom microscope. WEI Industries Co. Ltd model LED-632HC LED tester. This controller tested for power only. Not LED testing. 110V. 50/60 Hz. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
Buy It Now
$10.00 Shipping Condition: New Location: Bergenfield, United States GGB Industries 40A-SG-150-P Picoprobe Microwave Wafer Prober Tip
Buy It Now
Condition: Used Location: San Jose, United States Prober ID 9390088LZ, User ID=04011010. Chuck temp= Room and Hot=200c. Chuck: 300mm. Wafer Size= 200mm and 300mm. Cassette= Front open FOUP 300mm and 200mm ... morecassette. We have 2 units available both units are currently used with ring holder to work with 4.5" probe card.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: FA1006K501A. Removed from a Tokyo Electron P-8 Wafer Prober. These products are subject to export restrictions under U.S. law.
Buy It Now
Condition: For parts or not working Location: Gilroy, United States This Signatone Wafer Prober features a 5" Vacuum Chuck, as shown. However, this is the extent of my testing of this prober, and it is being sold as-is.
Buy It Now
Condition: For parts or not working Location: Gilroy, United States The microscope includes a pair of 15X eyepieces, and three Objectives: 2.25X, 8X and 25X. The Y-Axis (forward/back) lead screw assembly is partially disassembled, ... moreas shown. The knob on the X-Axis was severely bent when we got it, but I was able to bent it back enough to make the X-Axis movable.
Buy It Now
$150.00 Shipping Condition: For parts or not working Location: Gilroy, United States This Micromanipulator 1800 Wafer Prober Probe Station features a 4.5" Temptronic Thermal Vacuum Chuck, and a pair of 3-Axis Micropositioning Probes, as ... moreshown. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
$20.00 Shipping Condition: New Location: San Jose, United States C99729 Electroglas 266067-001 Rev. B RDC 8" Wafer Prober Gold Vacuum Hot Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) ... moreClick to Enlarge) Product ID# C99729 This Electroglas 266069-001 Rev. A 8" Wafer Gold Vacuum Hot Chuck looks to be in very good cosmetic condition. Possibly unused. However, I have no way of testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 11"L x 11"W x 3"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $22.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 5.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state tax rate applies. Or
Buy It Now
Condition: For parts or not working Location: Gilroy, United States The microscope illuminator lamp powers up, and the intensity is adjustable. Is there a Dock or Forklift available?. "The sale of this item may be subject ... moreto regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Two CAP-3000 programmable probe manipulator with X-Y-Z resolution of better than 0.10 micron.
Buy It Now
Condition: For parts or not working Location: Terryville, United States This manipulator was bought to mate with a AP3000E Wafer Probing Machine. Therefore it is being sold AS IS for parts. If you want to inspect the manipulator ... morein person, our warehouse is open 9-5, M-F during the week.
Buy It Now
$9500.00 Shipping Condition: Used Location: Livermore, United States This Tel P12XLn 300mm 12" wafer prober is a top-of-the-line piece of semiconductor test and assembly equipment. It is fully functional and ready to be ... moreput to work in your manufacturing operation. Made in Japan, this prober is a reliable and durable tool that will help you achieve your production goals. With its precise and efficient performance, the Tel P12XLn is the perfect addition to any CNC, metalworking, or manufacturing operation. Whether you're in the business of testing equipment or PCB manufacturing, this prober is sure to meet your needs. Invest in this high-quality tool and take your production capabilities to the next level.
|
|
|
|
Pacific Western Systems Probe II P5N-MS Wafer Prober Controller
REMINGTON TEST LLC SINCE 1990 3089 Lawrence Expressway. Santa Clara. CA 95051 Tel: 408) 888-6071; Fax: 408) 564-4262 Pacific Western Systems Probe II P5N-MS Wafer Prober Controller Condition: l Used– The unit is in working condition. l This auction only comes with what is listed in the description. l All parts. Accessories, cables, etc. are not included unless pictured or specified. l If in doubt. Please contact us before purchasin g. l No returns accepted. Quantity: 4 available Shipping: l Combined shipping is always available for multiple purchases; l We charge only the actual shipping costs Payment: California buyer pays sales tax THANKS TO ALL CUSTOMERS.
|
|
|
MC Sytems 6604 Manual Wafer Prober w/ B&L Microscope X-Y positioner
MC Sytems 6604 Manual Wafer Prober w/ B&L Microscope X-Y positioner. 6" Dia. Gold plated vacuum Chuck- X-Y manual positioner with rotating platen adjust. Bausch and Lomb StereoZoom 7 Microscope with light source and 20X WF Eyepieces. buyer must arrange and pay shipping. Sold AS-IS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e17feb257-0xf8-
|
|
|
Wafer Prober/ Analytical Probe Station - Alessi
Wafer Probe Station- Alessi Base. Comes with Leica Stereo Zoom 6- Photo microscope with 20X Nikon Eyepieces. 4" Chuck and two Signatone probe micropositioners with magnetic base(probe tips are not included) Works well.
|
|
|
Intest HP Agilent E7101 Wafer Prober-Tester Interface
Search our eBay Store! Intest HP Agilent E7101 Wafer Prober-Tester Interface SKU: JV-RYA-C-INTESE7101Z Condition: Used Packaging: Pallet/Skid Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Intest HP Agilent Versatest E7101 Wafer Prober-Tester Interface PTI. Includes Packer PXP-A11 Dual-Hand Operated Control Valve Module. Model: E7101-67936. Physical Condition: Excellent In-Box; minor scratches We do not have the necessary resources in our facility to test this unit. It is unknown how this particular unit is calibrated. Dimensions(L"W"H" 19* 20 ¼* 9 ½ Middle Recess Diameter: 7 ½” Unpacked Unit Weight: ... more84 lbs PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we m
|
|
|
KARL SUSS PA200/300PB Controller for Prober 8" Wafer Station 210AA074-01
KARL SUSS PA200/300PB Controller for Prober 8" Wafer Station 210AA074-01 This item is in good condition and it comes with our 30 days warranty. Please read the following terms of sale carefully. These terms constitute a legally binding agreement( contract) between the seller and buyer. By bidding on. Or purchasing, the product posted in this eBay listing, the winning bidder agrees to and accepts all of the terms of sale stated below. TERMS OF SALE: Only what is shown in the eBay photo and mentioned in the listing is included. Anything else should be understood to not be included. For sale is for the eBay item only. No service or tech support are included, but if you have a question feel free to ask and we'll answer if we can. All sales are final. Please understand that this is an auction/liquidation environment, not a retail store, ... moreso make sure the item is right for you, before bidding. PAYMENT: We accept payment by Paypal. And we only ship to the address which the buyer provides within the Paypal payment, no exceptions. If you would like to pay with a non-Paypal payment method. Please contact us before bidding to see if we can arrange something. Buyers are given 7 days from winning bid to pay. And payment is expected of all winning bidders If no payment is made within 7 days. An unpaid item reminder will be filed with eBay, and the buyer forfeits the auction win. We are required by state law to collect sales tax on all items shipping to a CA address. CA sales tax may be waived at our discretion. But only with a valid CA resale certificate- please contact us for resale exception*before* sending payment. DOMESTIC(US) SHIPPING: Local pickup is normally not available; exceptions are sometimes made. But only for higher-value orders. Please contact us first to see if we can make this arrangement for you, don't assume that we will be able to. We charge flat-rate shipping. And there is no extra cost to ship to AK, HI, PR, or PO boxes, these are all fine. Shipping cost includes packaging cost including time
|
|
|
Karl Suss PM 8 Wafer Prober Station Manual PM8 base part
This is part of a Manual Karl Suss PM 8 Wafer Prober Station. Great physical condition. Type: 11500026 Nr. 4019 V: 110 VA: 24 Hz: 60 Contact me for a shipping quote You will receive the exact item pictured International buyer responsible for any customs fees
|
|
|
Wentworth MP0901 Manual Wafer Prober Station w/ Bausch & Lomb MicroZoom +
Wentworth MP0901 Analytical Manual Wafer Prober Station with Bausch& Lomb Microzoom Microscope with Pair of B&L 10x WF Eyepieces 31-15-61 plus(4) B&L Objectives& B&L 31-32-44 Illuminator with Power Supply 30 Day WARRANTY! Because of the Size& Weight of this item. Please NO INTERNATIONAL BIDDERS. S/N 705 Includes: Bausch& Lomb Industrial Objectives(1) 2.25x 0.04 N.A. 1) 8x 0.15 N.A. 1) 25x 0.51 N.A. difficult to read) 1) 50x 0.45 N.A. Please note: This item is in GOOD cosmetic and working condition with some faint scratches and signs of normal wear. The optics are clean. Clear, focused and aligned and all mechanisms move smoothly. You are welcome to send questions about the item and if you are a local buyer you are welcome to come and inspect it. Please call us for hours of operation. 626-472-7500. Unit carries ... morea 30 Day WARRANTY! Please Note: The total weight of this item including packaging is: 135 lbs. We will palletize this item for shipping. This item carries a 30 Day repair or replacement warranty provided that our seals are intact and there is no evidence of user misuse. And ONLY IF the item listed above is not as pictured or described in the listing. This item is not calibrated but we warranty it to be calibrateable without any repairs needed. Items are as pictured below. If you are unsure about the completeness or condition of an item. Please contact us before placing your bid! Please read all of our terms of auction below before placing a bid. Terms of Auction: Payment arrangements are to be made within 3 days of close of auction. You will receive an email from eBay with payment instructions and a place to tell us how you would like to complete your purchase. A courtesy Payment Reminder will be sent on the 5th day of non payment. Item will be placed back up for auction if payment is not received within 8-10 days of the closing of the auction. Only items pictured above are included in the listing. There are no manuals or power cords included unless otherwise noted in the picture
|
|
|
KLA TEL Wafer Prober Probing Station 80S 200mm X Y Z NR
Questions? Call us: 1-877-328-9236. KLA TEL Wafer Prober Probing Station 80S 200mm X Y Z NR. Manufacturer: Tokyo Electron Limited TEL Model: Unknown Condition: For Parts or Not Working Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Tokyo Electron Limited TEL Condition: For Parts or Not Working. Cosmetic condition of this lot is poor with dented and dinged exterior panels and misaligned structural parts. Notes: This station is sold for parts or repair ONLY. The X/Y/Z wafer stage/chuck look to be in good to very good condition. But we have no way to test them. There is no monitor, and it looks as if one or two circuit boards may be missing. We are not sure what else is not included. When power is applied, the Power light came on, but nothing else happened; the monitor and robotics never came on. None of the controls ... moreresponded to user inputs. No other testing was done. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) TEL type 80s KLA wafer prober station, 1) TEL PC-1675B power supply, 1) Partial Optem HF video microscope, 1) Teradyne 829-413-00 probe contact card(part of a 961-577-01 assembly) Specifications: Manufacturer: TEL Tokyo Electron, Model: Unknown The only labels we could find are on one door. With TEL type 80s and on the power supply TEL(Tokyo Electron) PC-1675B. SKU: K34D009 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billin
|
|
|
Tokyo Seimitsu A-PM-88A Automatic Wafer Prober Probing Machine APM88A
Questions? Call us: 1-877-328-9236. Tokyo Seimitsu A-PM-88A Automatic Wafer Prober Probing Machine APM88A. Manufacturer: Tokyo Seimitsu Model: A-PM-88A Condition: For Parts or Not Working Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Tokyo Seimitsu Condition: For Parts or Not Working. Cosmetic condition is fair-to-good with minor(normal) blemishes from use as well as a couple of badly dented body panels. Notes: This station is sold for parts or repair ONLY. At least the microscope and monitor are gone. We are not sure what else is not included. We do not have the special power cable. So no testing was done. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) Tokyo Seimitsu A-PM-88A fully automatic wafer probing station, 1) Prober Manuals Binder, 4) Software disks, ... moreSpecifications: Manufacturer: Tokyo Seimitsu, Model: A-PM-88A, Capacity: Up to 6"150mm wafers, SKU: K34D017 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. This item will be shipped on a pallet via LTL Freight. Please fill out to receive a shipping quote. Buyer pays for all shipping costs. This cost includes professional packing& insurance. If payment is sent before the shipping cost has been a
|
|
|
KLA 1220 AUTOMATIC WAFER PROBER
KLA MODEL 1220 AUTOMATIC WAFER PROBER PRECISION XY STAGE ITEM IS UNTESTED AND SOLD AS IS
|
|
|
Rucker & Kolls 1032 Electroglas Stepping Wafer Prober - no scope
Rucker& Kolls 1032 Electroglas Stepping Wafer Prober- no scope Description Rucker& Kolls 1032 Electroglas Stepping Wafer Prober- no scope Alpha Force Fremont CA. Manufacturer Rucker& Kolls Manufacturer Part Number 1032 Item/Ship Weight 161 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions ... moreplease contact us before bidding. Shipping This item requires palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 42467 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping to make an adjustment to a different method which may c
|
|
|
Rucker& Kolls/electroglas 1032 automatic wafer prober w/B&L stereoscope
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Rucker& Kolls/electroglas 1032 A utomatic Wafer Prober with/ B&L Stereo microscope From a major Aerospace Company's excess asset sale. Powers up. Appears functional, and is in very good physical condition. may not be complete. Offered and sold as-is Please email with questions or for additional details or operation verification specifics. Bausch& Lomb Stereocope is in excellent condition. eyepieces, not shown, are included) Local inspection is welcome at(92821) Brea, CA. Due to the weight. Local pickup is preferred, or LTL Freight F.O.B. Brea. CA. Priced to sell. not much over the value of just the B&L microscope. A great deal for a So Cal buyer to pickup and save freight cost. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e6c1da8e0-0x105-
|
|
|
C99729 Electroglas 266067-001 Rev. B RDC 8" Wafer Prober Gold Vacuum Hot Chuck
C99729 Electroglas 266067-001 Rev. B RDC 8" Wafer Prober Gold Vacuum Hot Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C99729 This Electroglas 266069-001 Rev. A 8" Wafer Gold Vacuum Hot Chuck looks to be in very good cosmetic condition. Possibly unused. However, I have no way of testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 11"L x 11"W x 3"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $22.00(for DOMESTIC shipments only- 48 contiguous states excluding ... moreHawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 5.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state tax rate applies. Or
|
|
|
A99825 Electroglas TC2000 Wafer Prober Temp Controller, P54
A99825 Electroglas TC2000 Wafer Prober Temp Controller. P54(Click to Enlarge) Product ID# A99825 This Electroglas TC2000 Wafer Prober Temp Controller looks to be in good cosmetic condition with signs of wear and previous use(missing front plate cover) It powers up as shown. However I really lack the knowledge and equipment to test properly so it is being sold as-is. Unpacked dims are 12*8*5. See pictures for more details. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $28.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international ... moreshipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 21.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state tax rate applies. Orders will be placed on hold for
|
|
|
A99824 Electroglas TC2000 Wafer Prober Temp Controller, P54
A99824 Electroglas TC2000 Wafer Prober Temp Controller. P54(Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# A99824 This Electroglas TC2000 Wafer Prober Temp Controller looks to be in good cosmetic condition with signs of wear and previous use. It powers up as shown. However I really lack the knowledge and equipment to test properly so it is being sold as-is. Unpacked dims are 12*8*5. See pictures for more details. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $28.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international ... moreshipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 21.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state tax rate applies. Orders will be placed on
|
|
|
C100067 Electroglas 8" Wafer Prober Gold Vacuum Hot Chuck - P54
C100067 Electroglas 8" Wafer Prober Gold Vacuum Hot Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C100067 This Electroglas 8" Wafer Gold Vacuum Hot Chuck looks to be in good cosmetic condition. Showing some minor signs of wear. There are some minor scratches visible on the surface(please see photos above for detail) However, I have no way of testing it, and it is being sold as-is. I'm not sure what part number it is. The box that it came in does not have any labels on it. There is a sticker with"PU06051552" on the side of the gold chuck, and the cable has a label with the part number 253716-001D" on it, but I found that part number listed as a"Heater Element/Temperature Sensor Assembly. Approximate overall unpacked ... moredimensions: 14"L x 13"W x 4"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 5.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL
|
|
|
Karl Suss PA-200 Semiautomatic Prober 8" (200mm) Wafer
Hypervision Visionary 2000 Emission Microscope System with a Karl Suss PA-200 1-8" Semiautomatic Probe System Comes with what you see in the pictures. If you don't see it. You probably wont get it. Specifications are from a third party and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. Everything looks complete and everything appears in great condition. I was able to power up the Karl Suss prober and the motors worked on the x and y stage and I was able to focus with the controls and rotate the chuck. I was also able to index the stage with stepping. We were not able to test the vacuum or the camera and there is no computer or software. Link to the Karl-Suss Prober Datasheet: The Main Unit's Serial Number Tag Reads: Model Number: Hypervision Visionary 2000 Serial Number: AV9517 The Hypervision ... moreCamera's Serial Number Tag Reads: Model Number: TCI-350-Y-37 Serial Number: 10722 1002 The Hypervision Camera Controller/Cooler's Serial Number Tag Reads: Model Number: TCI-350 Serial Number: 10722A The Karl Suss Prober's Serial Number Tag Reads: Type: PA200 Serial Number: 4633 Power Requirements: 110V. 400 VA, 60 Hz CE Marked: Yes Manufacture Date: 95 The Karl Suss Prober Controller's Serial Number Tag Reads: Model Number: PA200PB Serial Number: 230 Power Requirements: 110V. 44.0 VA Manufacture Date: 7/95 The Olympus Hyper Lens Information Reads: Type: OM-System Zuiko. Auto-S, 50 mm, 1:1.2 Serial Number: 112116 The Vibration Table's Serial Number Tag Reads: Model Number: MICRO-g 63-561 Serial Number: 12830 The HP Power Supply's Serial Number Tag Reads: Model Number: 6624A Serial Number: 3446A11521 Output Channel 1: 0-7V/0-5A or 0-20V/0-2A Output Channel 2: 0-7V/0-5A or 0-20V/0-2A Output Channel 3: 0-20V/0-2A or 0-50V/0-0.8A Output Channel 4: 0-20V/0-2A or 0-50V/0-0.8A GPIB Communications: Yes Description: Emission Microscope System for detecting defects unattained by other failure analysis techniques. Defective regions emit light and are visible
|
|
|
TWO (2) TEL Tokyo Electron P8 Automatic Wafer Prober + (2) Thermo Generator D204
TWO(2) TEL P8 AUTOMATIC WAFER PROBERS w/ 2) TEL THERMO GENERATORS D204 Up for bid in this auction are(2) TEL P8 Automatic Wafer Probers along with(2) TEL D204 Thermo Generators. One of the units is fully functional and the other was listed as inactive. Both units are complete with all their parts and although both may work properly. I am selling them as(1) working unit and(1) spare unit that may or may not be fully functional. These were recently removed from a factory floor and were in great cosmetic condition, however after the shipping company got them over to me the front doors and exterior on both units got a little banged up. Included is a Hot/Cold chuck, software disks, and extra hosing(not pictured) Both units have the display monitor, it just got cut off in the 2nd photo. Buyer pays $200 for packing PLUS ACTUAL SHIPPING cost. CA ... moreresidents pay CA sales tax(exemption permits welcome) Please E-mail me any questions or I can be reached at 323-664-8655.
|
|
|
Wentworth MP-1300 FASPROBER Manual Wafer Prober MP1300
Wentworth MP-1300 FASPROBER Manual Wafer Prober Comes with what you see in the pictures. If you don't see it. You probably wont get it. Specifications are from a 3rd Party and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. The unit powers up but we do not have the expertise to test it after that. The key pad seems to have some keys that stick. The Unit's Serial Number Tag Reads: Serial Number: 80 Model Number: MP1300 Voltage: 115 VAC Amps: 5 A Cycles: 60 Hz Key Features: 4" Dia. Chuck, Vacuum Hold Down Stage for the Wafer, Stage Travel 6" x 8" Probe Platform Pneumatic Lift, Accommodates up to eight vacuum or magnetic probe manipulators or a probe card, Bausch and Lomb Microscope(there is no light source provided) For More Pictures Please Click the Following: $75.00 minimum for ... morepackaging. Handling, and order processing. Shipping to be determined by destination. If you have any questions please email us at: or call Michael at 1-866-MHZ-ELEC(1-866-649-3532) Toll Free. Also. Please to view or other auctions! 10/17/05 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
KLA MODEL Lightning 1220 AUTOMATIC WAFER PROBER
KLA MODEL LIGHTNING 1220 AUTOMATIC WAFER PROBER WITH SPARE BOARDS PRECISION XY STAGE ITEM IS UNTESTED AND SOLD AS IS
|
|
|
Wentworth Labs Manual Prober Station with 6" Temperature Controlled Wafer Chuck
You are currently bidding on: Wentworth Labs Manual Prober Station with 6" Temeprature Controlled Chuck- Great Condition Key Features: 6" Dia. Temperature Controlled Chuck Vacuum Hold Down Stage for 6" Wafer Stage Travel 6" x 8" Accommodates up to eight vacuum or magnetic probe manipulators or a probe card Bausch and Lomb Microscope with light source*This sale includes the shown components ONLY. No other unseen parts or accessories will be included. Note: Payment must be received in seven(7) days from close of sale or item will be relisted. Thank you for your time and happy shopping.
|
|
|
R100479-P54 Electroglas 2001X Automatic Wafer Prober System Manual Vol III #2
R100479-P54 Electroglas 2001X Automatic Wafer Prober System Manual Vol III#2(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# R100479 This Electroglas 2001X Automatic Wafer Prober System Manual Vol III#2 appears to be in good cosmetic condition with signs of prior use or wear. However. I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is. Please see photos for more detail. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos. It is not included. Unpacked dems are 13" x 12" x 04" Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. ... moreSee additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $22.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 10.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-t
|
|
|
R100481-P54 Electroglas 2001X Automatic Wafer Prober System Manual Vol I
R100481-P54 Electroglas 2001X Automatic Wafer Prober System Manual Vol I(Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# R100481 This Electroglas 2001X Automatic Wafer Prober System Manual Vol I appears to be in good cosmetic condition with signs of prior use or wear. However. I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is. Please see photos for more detail. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos. It is not included. Unpacked dems are 13" x 12" x 04" Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional ... moreterms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $21.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 8.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Cl
|
|
|
R100482-P54 Electroglas 2001X/2010X Automatic Wafer Prober System Manual Vol III
R100482-P54 Electroglas 2001X/2010X Automatic Wafer Prober System Manual Vol III(Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# R100482 This Electroglas 2001X/2010X Auto Matic Wafer Prober System Manual Vol III#1 appears to be in good cosmetic condition with signs of prior use or wear. However. I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is. Please see photos for more detail. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos. It is not included. Unpacked dems are 13" x 12" x 04" Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. ... moreSee additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $22.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 10.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locat
|
|
|
G100373-P54 Electroglas 2001CX Wafer Prober System
G100373-P54 Electroglas 2001CX Wafer Prober System(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# G100373 This Electroglas 2001CX Wafer Prober System appears to be in good cosmetic condition. Although there are a few small dings, scratches, signs of previous use. Please look at the photos. Due to a few loose wires, I believe that this unit is incomplete and partially disassembled and I feel it is not safe to power-up. Since I am unable to power it up and test it fully, I am obligated to list this unit as“Not Working” Included with this unit is a Mitsubishi AUM-1391A Color Monitor, an Electroglas DCM-2 Display Control Module, an Electroglas PCM Prober Control Module, an Electroglas PRM-3 Vision Module, ... morean Electroglas 2001CXE PSM Power Supply Module, an Electroglas 2001X Basic Maintenance Training Manual, and an Electroglas 2001X Automatic Wafer Prober Station Reference Manual Volume III. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 46“L inches x 37“W inches x 73“H inches. Due to the size of this unit. A custom made pallet or crate may be required to ship it. The cost of the pallet(if required) will be paid for by the winning bidder. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 846.00 Pounds Buyer pays freight plus a fixed handling fee of $25.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges a
|
|
|
R100478-P54 Electroglas 2001X/2010X Automatic Wafer Prober System Manual Vol III
R100478-P54 Electroglas 2001X/2010X Automatic Wafer Prober System Manual Vol II(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# R100478 This Electroglas 2001X/2010X Auto Matic Wafer Prober System Manual Vol III#1 appears to be in good cosmetic condition with signs of prior use or wear. However. I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is. Please see photos for more detail. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos. It is not included. Unpacked dems are 13" x 12" x 04" Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the ... moreitem description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $22.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 10.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all Califor
|
|
|
R100525-P54 Electroglas PRM-3 Vision Module For Wafer Prober in Computer Rack
R100525-P54 Electroglas PRM-3 Vision Module For Wafer Prober in Computer Rack(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# R100525 This Electroglas PRM-3 Vision Module For Wafer Prober in Computer Tower Rack w/ Extras appears to be in fair cosmetic condition with signs of prior use or wear. It comes with everything shown. However. I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is as shown. Please see photos for more detail. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos. It is not included. The unpacked dems of this piece are 23" x 21" x 61" Please ask questions or indicate concerns prior to bidding. By placing a bid. You ... moreagree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 301.00 Pounds Buyer pays freight plus a fixed handling fee of $25.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date qu
|
|
|
TEL Tokyo Electron LTD P-8 Automatic Wafer Prober
TEL Tokyo Electron LTD P8 Automatic Wafer Prober This item is exclusively for parts only. It has a chuck and overall has not been stripped much. This item is sold as is/where is. We are price-flexible. Contact/visit us at your most convenience. QUALITY EQUIPMENT SOURCE LLC is a surplus company with approximately 50.000sq ft of warehousing, where you will find almost any type of Semiconductor Equipment or other. Back-end, front-end, metrology and facility equipment we especialize and take pride in delivering to you the best in the market. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13ef8a578f7-0xf7-
|
|
|
R98224 Xynetics Electroglas Model 2001X 8" Wafer Probe Prober Station
R98224 Xynetics Electroglas Model 2001X 8" Wafer Probe Prober Station(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# R98224 This Xynetics Electroglas Model 2001X 8" Wafer Probe Prober Station is in fair cosmetic condition with many signs of prior use and wear. It comes as shown in the photos and it has not been powered on. Many pieces are missing. However. I lack the knowledge or experience to test this unit, so due to no testing, it is being sold as-is for Parts or Repair. Please see photos for more detail. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos. It is not included. Unpacked dems 45"x32"x44" Please ask questions ... moreor indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 496.00 Pounds Buyer pays freight plus a fixed handling fee of $25.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Frei
|
|
|
Electroglas EG2001CX Wafer Prober Nickel Chuck
Electroglas EG2001CX Wafer Prober Nickel Chuck This item has been used previously and may show some signs of wear. This item is sold as is/where is. We are price-flexible. Contact/visit us at your most convenience. QUALITY EQUIPMENT SOURCE LLC is a surplus company with approximately 50.000sq ft of warehousing, where you will find almost any type of Semiconductor Equipment or other. Back-end, front-end, metrology and facility equipment we especialize and take pride in delivering to you the best in the market.
|
|
|
PWS P5 Wafer Prober XY Robot Wafer Transport Assembly Vacuum Precision Slides
PWS P5 Wafer Prober XY Robot Wafer Transport Assembly Includes vacuum platform as pictured and steel base plate This was pulled from a working assembly. We were able to test the machine somewhat and the robotics appeared to be in excellent. Working condition. While we don't expect there would be any issues, there are just too many variables with a piece like this to offer any sort of warranty that makes sense. So, sold as is. We received a PWS P5 wafer prober. But it was missing parts, so rather than try to rebuild it, we're parting it out. For more info. Please visit the manufacturer's website: Please check my auctions or email if you are interested in similar or related items. Please email with any questions. Terms of Sale Buyer pays $125 shipping(continental US) HI. AK, PR and Canada pay $268 shipping. Paypal usually ships ... morewithin 24 hours. International bidders(non-Canadian) PLEASE contact us if you're interested in bidding. Thanks for your interest. Please email with any questions.
|
|
|
Pacific Western Systems (PWS) Wafer Prober P5 Probe II Controller Inspection
Pacific Western Systems(PWS) Wafer Prober P5 Probe II Controller P5 Controller P/N P5DMS We received a PWS P5 wafer prober. But it was missing parts, so rather than try to rebuild it, we're parting it out. For more info. Please visit the manufacturer's website: Please check my auctions or email if you are interested in similar or related items. Please email with any questions. Terms of Sale Buyer pays $48 shipping. continental US) HI. AK, PR and Canada pay $122 shipping. Paypal usually ships within 24 hours. International bidders(non-Canadian) PLEASE contact us before bidding. Thanks for your interest. Please email with any questions.
|
|
|
Micromanipulator 6600 Wafer Prober Probe Station w/ Temptronic Heater 6000
Fiber Optic Tools and Supplies BUY | SELL | TRADE surpluseq.com Description, Micromanipulator 6600 Wafer Prober Probe Station w/ Temptronic Temp Heater Used Micromanipulator 6600 Probe Station w/ Temptronic Temp Heater Product Type: Type@ Model/Part No:6600 Our Item ID: 251164 Description Specific Details: Sold as pictured. PR70624. Micromanipulator 6600 Probe Station w/ Temptronic Temp Heater/Cooling. Pneumatic Controlled isolation table. Temptronics Temperature Heater/ Cooling 8" Chuck, micromanipulator 6600. Controller& Manuals included. X and Y stage control is not operational via Joy Stick controller. Please contact us for details if you are interested in this item. Let us know if you would like specific tests performed. Or additional pictures of the unit. We are not experts on this type of equipment, and will provide information ... moreto the best of our ability. Condition: Product Type: Used Terms of sales: Contact Us for Warranty Details Physical Condition: Fair Working Condition: Partially Functional Tested Condition: Partially Tested 600.00 | 40.00 x 48.00 x 48.00 | 0. Manufacturer"s Product Information: Description: Specific Details: | | | Contact, Mailing Address: SurplusEQ 329 W. Melinda Ln. Phoenix AZ 85027 U.S.A. Phone: Toll-Free: 623) 581-9777(877) 967-1904. Business Hours: 7:30am- 4:00pm(Arizona time) Monday to Friday Email: surpluseq.com View our other and. Payment, We accept the following forms of payment: Credit/Debit Cards: Accepted for USA and Canadian eBay transactions pursuant to our eBay Sales Policy* Cards accepted: Visa, MasterCard, Discover Card. And American Express. We may require shipping to the card holder's billing address and signed CC Authorization form. PayPal: Accepted for USA and Canadian transactions pursuant to our eBay Sales Policy* Shipping to a PayPal verified address may be required. Authorization for PayPal acceptance when the item is being shipped to outside of the U.S.A. at our discretion. Contact us with questions. Sales Tax: Arizona(AZ)
|
|
|
Rigel Systems PWS Wafer Prober Magnetoresistance MR Measurement Probe Controller
Rigel Systems 4-point probe Magnetoresistance(MR) Measurement and Physical Properties Measurement System(PPMS) system A google search returns many telescope related items. But this set came with a wafer prober and I don't believe these have anything to do with astronomy. The only reference I can find to a"Rigel Systems" probe is in reference to research on the characterization of ST–MRAM Nanopillar Elements The model numbers on the boxes include"PH" probe head? I'm guessing) and SB825 on the front of the main computer looking unit. I'm guessing that these come with probes(not included) and are designed to scan thin film magnetic surfaces. I would guess that these are in excellent. Functioning condition, but I offer them strictly AS IS. Terms of Sale Buyer pays $38 shipping. continental US) HI. AK, PR and Canada ... morepay $82 shipping. Paypal usually ships within 24 hours. International bidders(non-Canadian) PLEASE contact us before bidding. Thanks for your interest. Please email with any questions.
|
|
|
Wentworth Labs PML 8000 Analytical Manual 8" Probe Station Wafer Prober Mint
Feel free to contact us for additional information through ebay mail. Or directly at: nrscientific@gmail.com- 201) 592-1864 Absolutely as New. Mint Condition W entworth Labs- P M L 8000 Analytical Manual Probe Station 8" Wafer Chuck/ 8" x 9" Stage Travel Mitut o yo FS70 1-2x Zoom Microscope( F S70Z-THS) Tilting. Ergonomic, Trinocular Head/ 50%50% Camera Port 10x Eye pie ces/ 10x& 20x Objectives Fiber Optic Illumination(Please note: This superb FS70 microscope- whi ch is the current model- cost s over $1 5.000 as conf ig ured above. Optio ns Av ailable at addit ional Cost: Additional O bje ctives. Micro Manipulators, Probe Card Holder. For your reference. The seller is N&R Scientific Co. Inc. We have been providing the highest quality refurbished and fully guaranteed equipment worldwide. You can purchase with complete ... moreconfidence that the equipment will be provided in excellent cosmetic and perfect operational condition. Our facility is located in the metropolitan NYC area. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Kindly contact us regarding suitable payment arrangements. We must also insure our shipments to guarantee safe delivery; hence, additional charges may be added to the purchase amount.
|
|
|
C101148 PWS Pacific Western Systems P8AMS Probe II Station SemiAuto Wafer Prober
C101148 PWS Pacific Western Systems P8AMS Probe II Station SemiAuto Wafer Prober(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C101148 This Pacific Western Systems(PWS) model P8AMS Probe II Station Semi-Automatic Wafer Prober looks to be in good cosmetic condition. Showing some signs of wear. It features a Trio-Tech International Artic TC Temperature Controlled Chuck(8" Gold) a PWS Probe II Power Supply/Controller, and an EL-1302 Wafer Prober Drivers Unit with handheld controller. The chuck is mounted within a chamber, and the lid can be raised and lowered. The system powers up, and the stage moves around, and the system responds to input from the controls. When I pressed the start button, ... morethe stage started moving around automatically. I was also able to move it around manually using the manual control buttons and switches. The 2-Axis Positioning arch which moves over the probing chamber is controlled by the EL-1302 Drivers unit, and the handheld controller. It moves forward and back, and side to side. This is the extent of my testing of this probing system, and it is being sold as-is. Please see the photos above, and additional photos links below, for detail. Approximate overall unpacked dimensions: 38"L x 47"W x 58"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 561.00 Pounds Buyer pays freight plus a fixed handling fee of $30.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact
|
|
|
C97044 Signatone S-1160C-6 Wafer Prober Probe Station w/2 Micropositioner Probes
C97044 Signatone S-1160C-6 Wafer Prober Probe Station w/2 Micropositioner Probes(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C97044 This Signatone S-1160 Wafer Prober Probing Station features an Olympus SZ4045 Microscope Head and a pair of micropositioning probes. It does not include eyepieces for the microscope. Also. The probe station is missing the chuck. It looks to be in good cosmetic condition, showing some minor signs of wear. Sold as is. Approximate overall unpacked dimensions: 28"L x 22"W x 14"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated ... morein the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $0.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 95.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all
|
|
|
C97041 Rucker & Kolls R&K 691 Automatic Wafer Prober Probe Station w/ 6" Chuck
C97041 Rucker& Kolls R&K 691 Automatic Wafer Prober Probe Station w/ 6" Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C97041 This Rucker& Kolls model 691 Automatic Probe Station looks to be in good cosmetic condition. Showing some signs of wear. One of the stage positioning knobs has broken off(see photos for detail) The knob that rotates the stage is still good, but I'm not sure what the broken knob controls. The system powers up, and responds to input from the buttons. The four arrow keys on the right-hand control panel move the stage around, and you can adjust the distance of each step using the dials on the left-hand control panel. Also, the"Load/Clear" button ... morebrings the stage all the way forward, and the"Home" button centers the stage. However, this is the extent of my testing of it, and it is being sold as-is. If you would like me to perform any more tests on it, just email me instructions, and I will give it a try. It features a 6" Vacuum Chuck, a Mitutoyo WF Trinocular Microscope Head, and comes with a pair of Mitutoyo WF 10X/24 Eyepieces, a Mitutoyo Illuminator& Power Supply(it powers up and the intensity is adjustable) a Cohu 4815-5100/AL50 Solid State Camera, and a Rucker& Kolls 269-12 Probe Card Holder, as shown. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 0.00 Pounds Buyer pays freight plus a fixed handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on fre
|
|
|
C97023 Electroglas 3001X 8" Wafer Prober Probe Station
C97023 Electroglas 3001X 8" Wafer Prober Probe Station(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C97023 This Electroglas 3001X 8-inch Wafer Prober looks to be in decent cosmetic condition. Showing some signs of wear. I'm not sure how complete it is, but it comes as shown. It does not have a microscope, but it does have the 8-inch chuck. I have no way of testing this system, and it is being sold as-is. Approximate overall unpacked dimensions: 54"L x 38"W x 60"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item ... moredescription. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 1.412.00 Pounds Buyer pays freight plus a fixed handling fee of $25.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to re-quote the
|
|
|
C97048 Signatone S-1007S Wafer Prober Probe Station w/ 5" Vacuum Chuck
C97048 Signatone S-1007S Wafer Prober Probe Station w/ 5" Vacuum Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C97048 This Signatone S-1007S 5" Wafer Prober Probe Station is in good cosmetic condition. With some minor scratches and signs of use. I plugged it in, and it powered on and the lights on the buttons lit up. No further testing has been done. It comes with everything seen attached to it. The orange table that it is sitting on in the photos is not included. The wafer chuck in the center is 5” in Diameter. I do not have the tools or equipment to thoroughly test this item, so it is being sold as is. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold ... moreas advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 73.00 Pounds Buyer pays freight plus a fixed handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been recei
|
|
|
Electroglas Wafer Prober 1031 w/ Olympus Microscope Head
The item up for sale is: For Parts or Repair* Electroglas Wafer Prober Model 1031 includes Olympus Microscope Head This item is non-operational. Or its operational condition cannot be determined. If you have any question regarding this unit please feel free to contact me and I will do my best to answer your questions Included is only what is mentioned: 1 unit as shown in picture. Picture represents the actual item. No other cables. Parts, power adapters, software or any other accessories included. NOTE: The sale of this item is final; we will not accept a return under any circumstances. Please examine the item closely. If you need additional information. Photos or would like for us to perform some basic tests to determine the condition please feel free to contact us prior to your purchase. 120 Pounds on a pallet Shipping: Buyer is responsible ... morefor all shipping cost including returns. Please note for domestic shipments(within US) we ship Fedex ground only. But you can use UPS ground shipping rates(calculated automatically by ebay) to estimate the shipping charges. Actual Fedex ground rates may be cheaper then UPS depending on the destination, so for heavy packages you can always contact us to get the exact shipping rate. FEDEX does not ship to PO Boxes- please provide us with a regular address prior to completing the transaction. International Shipments: International shipments are shipped by USPS global express mail if such option is available. We process international shipments twice a week. Please note that Buyer is responsible for all custom duties/taxes/fees where applicable. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavio r International Shipping Limita
|
|
|
Pacific Western Systems (PWS) P5 Wafer Prober Control Panel Assembly
Pacific Western Systems(PWS) P5 Wafer Prober Control Panel Assembly Pulled from a working assembly and guaranteed in excellent working condition. We received a PWS P5 wafer prober. But it was missing parts, so rather than try to rebuild it, we're parting it out. For more info. Please visit the manufacturer's website: Please check my auctions or email if you are interested in similar or related items. Please email with any questions. Terms of Sale Buyer pays $22 shipping. continental US) HI. AK, PR and Canada pay $52 shipping. Paypal usually ships within 24 hours. International bidders(non-Canadian) PLEASE contact us before bidding. Thanks for your interest. Please email with any questions. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13f7a3d64e8-0xf7-
|
|
|
C101536-P54 Electroglas 266291-001D 12" Wafer Prober Nickel Thermal Vacuum Chuck
C101536-P54 Electroglas 266291-001D 12" Wafer Prober Nickel Thermal Vacuum Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C101536 This Electroglas 266291-001 Rev. D 12" Wafer Nickel Thermal Vacuum Chuck looks to be in good cosmetic condition. Showing some minor signs of wear. However, I have no way of testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 17"L x 17"W x 3"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $46.00(for ... moreDOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 12.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa
|
|
|
C97050 Signatone S-250-5 Wafer Prober Probe Station w/ B&L Microzoom Microscope
C97050 Signatone S-250-5 Wafer Prober Probe Station w/ B&L Microzoom Microscope(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C97050 This Signatone S-250-5 Wafer Prober Probe Station looks to be in good cosmetic condition. With some minor scratches and signs of use. It features a B&L Microzoom Microscope body, but it is missing the microscope head. Also, it is missing the chuck. The U-Shaped metal piece has some spots on it I couldn’t get off. The only thing that didn’t seem to work was the Y axis control on the bottom right of the base. It comes with everything seen attached. Unfortunately I do not have the tools or equipment to test this unit, so it is being sold as is. Please ask questions or indicate concerns prior to bidding. By placing ... morea bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 149.00 Pounds Buyer pays freight plus a fixed handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar da
|
|
|
Electroglas EG 2001 Wafer Probe Inspection Station w/ 8" Prober Chuck, SVTR PPC
Template By Froo! SVTR Wafer Probe Inspection Station w/ 8" Prober Chuck. PPC& Olympus Microscope· WHAT IS IT? This listing is for(1) used Electroglas EG 2001 Wafer Probe Inspection Station w/ 8" Prober Chuck. PPC TC2000 Vision Module, Joystick& Olympus Microscope. This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES IT WORK? UNKNOWN(unit was purchased in a bulk of surplus equipment) We do not have the time. Equipment, or expertise to test it further. This means that it is being sold as-is. As-pictured with the assumption and understanding that additional calibration, parts or repairs may be required and should be expected. HOW’S IT LOOK? Fair. Older systems with some cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. ... morePlease as questions if needed and bid accordingly. Please read the terms below for more information on our store. Policies, and details specific to this listing. About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds must be in US Dollars and unsecured funds must clear p
|
|
|
Xynetics Electroglas Model 2001X Wafer Probe Prober Station w/ Rucker & Kolls
Xynetics Electroglas Model 2001X Wafer Probe Prober Station w/ Rucker& Kolls 229-1& Sony B&W Monitor VM5509. Used, Sold As Is, Used Surplus Unit. Comes with a nice table/desk. Be sure to check out the pictures! WYSIWYG We never warranty calibration. Payment must be made within 3 days of the close of the auction. THERE IS NO PICK UP ONLY SHIPPING FOR THIS UNIT. WE WILL COMBINE SHIPPING WHEN POSSIBLE. BY BIDDING YOU CONFIRM THAT YOU HAVE READ. UNDERSTAND, AND AGREE TO OUR SALES TERMS. So be sure to email your questions before bidding. We strive for all 5 stars in Detailed Seller Ratings! Payment: Payment is required with in three days of the end of the auction. We accept the following payment methods: Paypal Credit Cards up to $2500.00(AMEX. MC, VISA) from US purchases only NO WIRE TRANSFERS~NO EXCEPTIONS Colorado residents pay ... morestate sales tax. 2.9% Shipping: Please email your zip code for a shipping quote. We can only ship this unit to a verified commercial address. Please let us know if you have a forklift or will need lift gate service. Great purchase for a customer on the Front Range or Great Denver area. International Buyers MUST READ BEFORE BIDDING: No international shipping Returns and Refunds: Customer pays return shipping. If you have an issue with your purchase please be sure to give us the opportunity to help you. We strive for 5 star service! Contact: We do check email often and we are generally easier/faster to get in touch with by email than by phone. If you need to contact us by phone. Amelia@ 970-219-3228 On Jul-16-09 at 17:02:37 PDT. Seller added the following information:
|
|
|
Cascade Microtech Probe Station Summit 12000 Semi-Automatic Thermal Wafer Prober
CASCADE SUMMIT 12000 WAFER PROBER DESCRIPTION The Cascade Microtech 12000 Series probe systems allow you to access the full measurement range of your test instrumentation. Noise. Leakage, stray capacitance and measurement settling times have been greatly reduced. Whatever the application, DC or RF device characterization, wafer-level reliability, e-test, modeling, or yield enhancement, the 12000 Series probe stations assure best-in-the-world measurements. CONFIGURATION& INCLUDED ACCESSORIES: Summit 12k Thermal Wafer Prober with MicroChamber& AttoGuard shielding, 8 inch/200cm Temptronic thermal wafer chuck w/ TPO3000A Controller& Chiller, Rebuilt computer with Windows XP and Nucleus 3.3.4(includes monitor. Keyboard, mouse) A-Zoom Microscope& Camera w/ 10X eyepieces and(1) Mitutoyo M Plan APO 5X Objective, Large Area Bridge ... moreMount: 6" X axis travel. 8" Y axis travel, and 3" linear manual Z-lift, Qty. 6) DCM200 Series Positioners/ Precision Probe Manipulators, Kinetic Systems Vibraplane anti-vibration isolation table, Celadon chamber surface modification attachment, System will not includes any accessories not listed or shown in our photos* We require up to 14 days lead time to recharge the chiller and prep the system for shipment. PAYMENT AND SHIPPING INFO Warranty Info& Return Policy This listing is subject to a limited 14-day Domestic ROR(Right of Return) unless otherwise noted. This ROR is limited to goods found to be non-acceptable due to cosmetic defect(not previously disclosed) or item not meeting manufacturer's spec as advertised. ROR does not apply to wrong item(s) ordered by customer. All items past the 5-day ROR period will be accepted only under written acceptance by AxiomTest. Customer agrees to pay all return shipping costs for any returned item. Items that are damaged in shipping are not covered under ROR terms. Items misused or damaged by customer's misuse(intentional or unintentional) are not covered by ROR. ROR does not apply to rental orders. Returns must
|
|
|
C88127 Signatone Semi-Automatic Wafer Prober Probe Station for parts/repair
C88127 Signatone Semi-Automatic Wafer Prober Probe Station for parts/repair(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C88127 This Signatone Semi-Automatic Wafer Prober Probe Station looks to be in decent cosmetic condition. Showing some signs of wear. It appears to be missing its nameplate, so I do not know the model or serial numbers. It is missing a few of its buttons. I plugged it in, and it powered up, and the power switch illuminates, but I could not get it to do anything else. It did not seem to respond to any of the buttons. It does not include a microscope or a chuck. It does feature an X-Y Stage with Linear Encoders, but the X-Axis(side to side) gets stuck at about the half-way point when moving it to the left. It is being sold as-is, ... morefor parts or repair. Approximate overall unpacked dimensions: 18"H x 33"W x 26"L. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. Shipping. Buyer pays a fixed handling fee of $20.03(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Buyer has the choice of arranging for pickup. Or requesting a shipping quote after the auction ends. Winning bidders of freight items should complete the checkout process and will be billed for shipping after we have received quotations from our carriers. The unpacked weight of this item is 151.00 Pounds Freight Shipments: Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this timeframe. The rate will expire. We reserve the right to requote the freight charges in the event of a payment delay. Auction Terms. Upon end of auction. The winning bidder should proceed to"Check Out" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(excep
|
|
|
Alessi Cascade REL-4100A Manual Wafer Probe Inspection Station: 6" Prober Chuck
Template By Froo! Alessi Cascade REL-4100A Manual Wafer Probe Inspection Station: 6" Prober Chuck· WHAT IS IT? This listing is for(1) used Alessi Cascade REL-4100A Manual Wafer Probe Inspection Station with the following: Alessi 6" Chuck and 3-way positioner inside dark box chamber(external dimensions are 39Dx37Wx35H. Internal platform is 24x30" Bausch& Lomb microscope with WF10X/21& 1X/20 eye pieces. Light source, and(4) objectives: 50X 0.45NA, 25X 0.31NA, 8X 0.15NA, 2.25X 0.04NA Panasonic WV-CL110 Color CCTV Camera(no power supply) and CT-1383 Monitor Picoprobe power supply/controller*This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES IT WORK? All mechanical components move freely and show no signs of abnormal wear& tear. The light source and monitor both ... morepower on but we do not have a power supply for the camera. We do not have the time. Equipment, or expertise to test it further. This means that it is being sold as-is. As-pictured with the assumption and understanding that additional calibration, parts or repairs may be required and should be expected. HOW’S IT LOOK? Fair. Some minor cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please as questions if needed and bid accordingly. Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! Normal 0 false false false EN-US X-NONE X-NONE About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering s
|
|
|
Electroglas 4085X Horizon Wafer Prober System RMHM4 Controller
Electroglas 4085X Horizon Wafer Prober System Specifications: 208V. 50/60Hz, 8" chuck. W/ test head lifter assembly RMHM4 Controller DCM3 Display Control Module PCM Prober Control Module PRM3 Vivion module. Pneumatic module Optem 25-81-22 HF Video Microscope Optem 28-90-77 Mounting Fixture(2) Optem Illumination Supplies Panasonic GP-KS162CUD Camera Controller CRT Monitor Contact Justin at 503.464.6013 with any questions. Located in Hayward. CA. Buyer responsible for any required skidding or crating charges. WORLDWIDE FREIGHT SHIPPING AND PACKAGING COSTS TO BE DETERMINED BY DESTINATION. Please read the terms and conditions below so that you understand how all our items are sold. Payment Options: ALL PAYMENTS ARE EXPECTED WITHIN 48 HOURS OF AUCTION CLOSE. WE UNDERSTAND THAT THERE ARE EXCEPTIONS. BUT COMMUNICATION IS KEY. PLEASE DO NOT ... moreBID IF YOU CANNOT PAY FOR THIS ITEM IN A TIMELY MANNER. Shipping Options: Smaller Items: Minimum shipping charge of $15.00. Items over $500. Must be insured at the buyers expense of $0.50, per $100. Freight Items: The buyer is responsible for coordinating shipment and is responsible for all freight and rigging(if required) costs. We can arrange freight shipments. You will be billed exactly as quoted by my freight forward. With no mark-up, however at times this may be more than the cost of the actual item. Please ask for a quote prior to bidding, so there are no surprises. Freight items typically require payment by bank wire transfer or certified funds, since shipments and delivery confirmations typically do not conform with Paypal requirements. Local Pick-Ups: This option is available on many auctions. However we are not always on-site where the item is located. Please inquire before bidding. Typically there will be no additional charge for a local pick-up. However some larger items may require an additional rigging fee upon pick-up. Terms and Conditions: Most items that we sell are from plant closures and business liquidations. We typically wholesale directly from the facility c
|
|
|
TEL Tokyo Electron M8C30918-1 Optical Module P-8 Wafer Prober Used
This Tokyo Electron optical module is used surplus that was pulled from a larger tool. It is in very good physical condition. But may have some minor scratches from general use and handling. Part No: M8C30918-1 Sony Camera Part No: XC-75 Kowa Board Part No: GFZ-2163-10 Removed from Tokyo Electron P-8 Wafer Prober tool Condition: Working. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 14"x14"x14" 10 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not ... morenecessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 1 R0 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped
|
|
|
KLA Lightning 1201 Wafer Prober Stage Controller w/ 3 Cards
Just in from a local aerospace company sale comes this surplus KLA Lightning 1201 Wafer Prober Stage Controller w/ 3 Cards. STG.F, PRB.St, Micro, working pull All items with power cords are tested for simple power on only. It is presumed good( unless otherwise noted) but sold as shown and as-is. Paypal due immediately/ Local Pick-up available 8am-12noon weekdays from 91355/ 9% Calif. sales tax required WE SHIP FAST! Location/ warehouse 2 rolling cart.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-140421c1689-0x101-
|
|
|
C102840 Electroglas Horizon 4080X 8" Wafer Prober
C102840 Electroglas Horizon 4080X 8" Wafer Prober(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C102840 This Electroglas Horizon 4080X 8" Wafer Prober looks to be in good cosmetic condition. Showing some signs of wear. It powers up, and initialized, but eventually a box pops up on the screen, reading: Wafer on Tranfer Arm/ Please Remove the wafer from the transfer arm. I do not see an wafer inside the system, or on any of the arms. I hooked the system up to pressurized air, but I do not have a fitting compatible with the Vacuum In connector, so I was not able to apply a vacuum, so I'm wondering it that might have something to do with it. This is the extent of my testing of this system, ... moreand it is being sold as-is. It comes with an"EGCommander 6.0" Manual, and a"263425-001 Rev. D Tool Kit, MHN Set-Up 4090, as shown. Approximate overall unpacked dimensions: 39"L x 50"W x 68"H. A custom pallet or crate may be needed to ship this prober, the cost of which will be the responsibility of the buyer. Here are links to a few more pictures: Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 0.00 Pounds Buyer pays freight plus a fixed handling fee of $25.03(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip C
|
|
|
Mother of wafer prober huge, semiconductor collectors, gold recovery
This wafer probe is used a collector piece or for gold recovery. Has gold even under the plastics like coating A collectors piece for those interested in the semiconductor industry or computer hobbyists. Computer or microchips collectors! This is an actual probe used in the testing and production of wafers. It is composed of plastic(bakelite) and gold. It measures around 14 inches. It has gold on both sides. I would not be surprised if it would have over 1 ounce of gold!
|
|
|
KARL SUSS PSM 6 6 Inch Precision Manual Submicron Analytical Wafer Prober
KARL SUSS- PSM 6 Inventory# 57362*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. 6 inch Precision Manual Submicron Analytical Wafer Prober. Platen accepts vacuum or magnetic base probe manipulators. For probing internal geometries on wafers or substrates up to 6 inch diameter on a 6 inch vacuum chuck. Manipulator controlled XY microscope movement and convenient microscope lift. Bausch and Lomb MicroZoom microscope with three long working distance objectives. Stage alignment mechanism securely holds an air supported wafer stage in X. Y and Theta.The stage moves effortlessly across a lapped granite base plate that can be quickly vacuum locked in test position. Can be sold in untested as-is condition. Or fully checked out and refurbished ... moreby one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
|
|
|
KARL SUSS PM8 8 Inch Submicron Analytical Wafer Prober
KARL SUSS- PM8 Inventory# 58251*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. 8 inch Submicron Analytical Wafer Prober. Aluminum platen accepts vacuum probe manipulators. Not magnetic. provides the stability and resolution required for precise probe positioning. Submicron precision and stability. 8 inch diameter vacuum chuck. Mitutoyo microscope with long working distance objectives. Platen Z travel has 45mm of linear motion with a 400 micron contact/separation stroke. Fine glide chuck stage with 8 inch X-Y motion and automatic vacuum position lock. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact ... moreus directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-140a57743f0-0xf4-
|
|
|
Signatone Manual Wafer Prober Station: 4" Chuck, Probe Positioner & Nikon Scope
Template By Froo! Signatone Manual Wafer Prober Station: 4" Chuck. Probe Positioner& Nikon Scope· WHAT IS IT? This listing is for(1) used Signatone Manual Wafer Prober Station: 4" Chuck. 2) Probe Positioners& Nikon EPOI 731211 0.5X Scope with light source, M3 0.11 Objective, and HKW10XEP eye pieces. This sale includes shown components ONLY. No other unseen parts or accessories will be included. Normal 0 false false false EN-US X-NONE X-NONE· DOES IT WORK? UNKNOWN(unit was purchased in a bulk of surplus equipment) All the mechanical features are operational but we do not have the time. Equipment, or expertise to test it further. This means that it is being sold as-is. As-pictured with the assumption and understanding that additional calibration, parts or repairs may be required and should be expected. HOW’S IT LOOK? ... moreFair. Some minor cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please ask questions if needed and bid accordingly. Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction earl
|
|
|
C103270 Mitutoyo Alessi New Wave Motorized Positioning Wafer Prober Microscope
C103270 Mitutoyo Alessi New Wave Motorized Positioning Wafer Prober Microscope(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C103270 This Mitutoyo 378-134-4 New Wave UV Motorized Positioning Microscope for an Alessi Wafer Prober looks to be in good cosmetic condition. Showing some signs of wear. All of the positioning mechanics seem to be in good shape when moved by hand. The bottom forward/back positioner can be disengaged from the positioning screw and motor. However, I do not have any way of power it up and formally testing the motorized positioners. It features a 4-objective lens turret, but it is missing the actual microscope head. It is being sold as-is. Approximate overall unpacked dimensions: 20"L x 11"W x 11"H. ... morePlease ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $60.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 39.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal pay
|
|
|
Wentworth Labs PML8000 Wafer Prober w/ Signatone S-725-SLM Micropositioner
C10002. Wentworth Laboratories Model PML8000 Wafer Prober with Signatone Model S-725-SLM Micropositioner- 8 inch vacuum chuck- Mitutoyo Microscope with WF10x/24 Eyepieces- Objectives are Mitutoyo APO 2. 10, 20 and SL100. Please review all the pictures. They are part of the description. We will load at no charge on a truck you send and pay for. If you do not have a freight carrier we can provide a freight quote. We combine shipments whenever possible. Not responsible for customs charges,
|
|
|
Micromanipulator Dark Box Light Isolation Chamber for Probe Station Wafer Prober
Template By Froo! Micromanipulator Dark Box Light Isolation Chamber for Probe Station Wafer Prober· WHAT IS IT? This listing is for(1) used Micromanipulator Dark Box Light Isolation Chamber for Probe Station or other piece of lab testing/ manufacturing equipment. Approximate dimensions are 38W x 38D x 34T inches. The inner platform/ table is a 30W x 24D inch stage. We also have objectives. Probers and other accessories that will be sold separately. Please visit our store or call(760)806-6600 if you need assistance. This sale includes shown components ONLY. No other unseen parts or accessories will be included. HOW’S IT LOOK? Fair. Some cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please ask questions if needed and bid accordingly. Local pick-up or FREIGHT shipping only- if ... moreyou require a custom built crate an additional fee will apply! Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds mu
|
|
|
Ultracision 680E Semiautomatic Analytical Wafer Prober
Ultracision 680E Semiautomatic Analytical Wafer Prober Inventory# 58543*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Semiautomatic Analytical Wafer Prober. Probes wafers and substrates up to 150mm. Automatic Z control. Electronic inch/metric conversion in X-Y. Automatic die size measurement. Bausch& Lomb StereoZoom 7 microscope with illuminator. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases ... moreof this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Cascade Alessi REL-4800A Manual Probe Station 8" Wafer Prober + Scope Objectives
Template By Froo! Cascade Alessi REL-4800A Manual Probe Station 8" Wafer Prober + Scope Objectives· WHAT IS IT? This listing is for(1) used Alessi REL-4800A Manual Probe Station 8" Wafer Prober with 8" Chuck. RCZ Remote Focus, AUC-11, MH-8272-120& MH-7267-54 Manipulator Postioner arms, Mitutoyo WX 10X/24 Ete pieces, light source, and(3) objectives: M Plan APO 2, 10, and 20, and Panasonic WV-PS10A Camera Drive with GP-KR222 Camera piece. The X-Y Platform Stage moves freely(but not loosely) from front to back and left to right, and the outside stage lifts up and down with a pull of the lever. In other words, all manual mechanical functions appear to be in acceptable condition. We also have tables. Dark box light chambers and other accessories that will be sold separately. Please visit our store or call(760)806-6600 if ... moreyou need assistance. This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES IT WORK? UNKNOWN. All mechanical functions have been tested and appear to be working properly. However. We have not looked closely at the scope nor do we have the expertise to test this system any further. Therefor, it is being sold as-is with the assumption and understanding that additional calibration. Parts or repairs may be required and should be expected. HOW’S IT LOOK? Good to Fair. Some cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please ask questions if needed and bid accordingly. Local pick-up or FREIGHT shipping only- if you require a custom built crate an additional fee will apply! Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in custom
|
|
|
Cascade Alessi REL-4100A Analytical Prober Manual Wafer Probe Inspection Station
Template By Froo! Cascade Alessi REL-4100A Analytical Prober Manual Wafer Probe Inspection Station· WHAT IS IT? This listing is for(1) used Alessi REL-4100A Manual Wafer Probe Inspection Station/ Analytical Prober with Bausch& Lomb(B&L) Microscope. Light Source and(3) objectives: 0.4, 8 and 25X. There is no chuck. The X-Y Platform Stage moves freely(but not loosely) from front to back and left to right, and the outside stage lifts up and down with a pull of the lever. In other words, all manual mechanical functions appear to be in acceptable condition. We also have objectives. Tables. Dark box light chambers and other accessories that will be sold separately. Please visit our store or call(760)806-6600 if you need assistance. This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES ... moreIT WORK? UNKNOWN. All mechanical functions have been tested and appear to be working properly. However. We have not looked closely at the scope nor do we have the expertise to test this system any further. Therefor, it is being sold as-is with the assumption and understanding that additional calibration. Parts or repairs may be required and should be expected. HOW’S IT LOOK? Fair. Some cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please ask questions if needed and bid accordingly. Local pick-up or FREIGHT shipping only- if you require a custom built crate an additional fee will apply! Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted M
|
|
|
Micromanipulator 6200 Wafer Probe Station Manual Prober Bausch & Lomb Microscope
Template By Froo! Micromanipulator 6200 Wafer Probe Station Manual Prober Bausch& Lomb Microscope· WHAT IS IT? This listing is for(1) used Micromanipulator 6200 Manual Prober/ Wafer Probe Station with Bausch& Lomb microscope. 20x W.F. eye pieces, 2.25, 8 and 25X objectives, Fiberlite#170-D illuminator, Micromanipulator MUC and 7000-SSA Stage, and 2#4446 Slimline Micro Positioners. This sale includes these listed components ONLY. No other unseen or unmentioned parts or accessories will be included. DOES IT WORK? T he prober has not been tested and may not be a complete system. This means that it is being sold for parts or repair with the understanding that additional parts. Calibration or repairs will be required. HOW’S IT LOOK? Fair. Older machine with cosmetic scuffs and blemishes(see photos) CAN I RETURN IT? No. Returns will ... morebot be accepted. Please bid accordingly. Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds must be in US Dollars and unsec
|
|
|
Micromanipulator 6000 Manual Prober Wafer Probe Station + Olympus Microscope
Template By Froo! Micromanipulator 6000 Manual Prober Wafer Probe Station + Olympus Microscope· WHAT IS IT? This listing is for(1) used Micromanipulator 6000 Manual Prober/ Wafer Probe Station with Olympus microscope. K20X eye pieces, 6, 20, and100X objectives, light source, and no chuck assembly. This sale includes these listed components ONLY. No other unseen or unmentioned parts or accessories will be included. DOES IT WORK? T he prober is missing parts and is not a complete working system. This means that it is being sold for parts or repair with the understanding that additional parts. Calibration or repairs will be required. HOW’S IT LOOK? Fair. Older machine with cosmetic scuffs and blemishes(see photos) CAN I RETURN IT? No. Returns will bot be accepted. Please bid accordingly. Please read the terms below for more information ... moreon our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds must be in US Dollars and unsecured funds must clear prior to shipment. We will accept wire transfers for an additional
|
|
|
Magne-Tron Model M-700 Wafer Resistivity Conductivity Prober Control Unit
Search our eBay Store! Magne-Tron Model M-700 Wafer Resistivity Conductivity Prober Control Unit SKU: JV-MAT-A-MAGNETRON700 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Magne-Tron Model M-700 Wafer Resistivity Conductivity Prober Control Unit Model: M-700 Physical Condition: Good. Minor scuffs/scratches/sticker residue and signs of use. Functionality/Degree of Testing: Unit powers on with indicator lights. Display is functional and controls are responsive. We do not have the necessary resources to further test this unit. Power cable is not included. Dimensions(L" x W" x H" 14.5*13.875*5.625 ... moreTHE FDA DISCLAIMER BELOW IS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the l
|
|
|
Xynetics Electroglas 1034X Prober Wafer with Power Module 1034X
Please Note That We Will Be Closed For the Christmas Holidays From December 23 to January 6* The 1034X is designed to give semiconductor manufactures a prober of significantly greater throughput capacity. By reducing wafer load and alignment time and by improving the manual prober functions. In the model 1034X. Wafers are loaded and unloaded outside the probe ring area without disturbing the probe ring or optics. When loaded, wafers are rapidly aligned on any device in the matrix area via automatic gross positioning, manual or motorized Theta alignment, and a multifunction joystick that provides twenty separate manual commands in a single control. In addition. Safety interlocks allow indexing and jog movements while leaving the chuck in the up position. The operator is free to command stage movement without first lowering the chuck. Internal ... moreprober electronics automatically lower the chuck, initiate stage movement, and raise the chuck once stage movement in completed. This exclusive Electroglas feature saves significant operator alignment time. To further simplify operation. The 1034X is equipped with an indicating panel that constantly advises the status of all prober functions. At one glance, direction, check and prober status are immediately known by the operator. Includes: Model 1034X Power Module Rucker& Kolls Model 310 026C Stereoscope with WFH 10X Eyebieces NO RESERVE! BUY IT NOW Ask our Sales Personnel for details. Item ID: 320175, Manufacturer: Xynetics, Model Number: 1034X, Description: Electroglas Prober Wafer w/Power Module*As-Is* Made in: United States, Weight: 250Lbs, Condition: As is, Cosmetic: Very Good, 115 Volts 3 Phases 60 Hz Have questions regarding this product? Contact us: ebay@megawavz.com Bidders with less than a( 5) rating must contact us prior to bidding otherwise their bids will be removed. Payment must be received no later than 7 working days from the closing date of the auction. Unless discussed with the billing party. In the case that payment has not b
|
|
|
Rucker & Kolls 666 Wafer Prober/Probe Station
Rucker& Kolls 666 Wafer Prober/Probe Station For sale- a Rucker& Kolls 666 Wafer Prober/Probe Station. I guess that is what you would call it. Before we go any further. And as I think you can see in the pictures, I don’t believe the unit is complete, so it may or may not be“usable” as is. Since I don’t understand exactly what the thing is used for I won’t label it as being for parts or repair. But the other 666 listed has an upper deck so to speak mounted to the two steel rods sticking up and it has a stereozoom microscope mounted. This one has neither. So if those things are an integral part of the process then this particular one may well need refurbishing before it can go back into service. The microscope probably isn’t all that hard to come by but the mount for it may be. And I have no idea if the missing upper level part would ... morestill be available from Rucker& Kolls. Please do your own homework relative to what might be required to complete the prober before you buy. It is completely untested and NO warranty is offered. However. IF you pay the asking price and find it has a problem you cannot live with within 14 days of receipt you may return it. Returns are ONLY allowed on Buy It Now Purchases. Accepted Best Offers are strictly an as is sale. No returns allowed. Return would be for a refund of the purchase price. Not including shipping costs. Just so that we are clear on that. This is an item that has not been thoroughly tested. As such it may work fine or it may have problems. So any purchase entails a certain degree of risk. If you Buy It Now your risk is limited to the shipping costs both ways. If you submit an offer you do so knowing that you cannot return it. In either case it is up to you to decide whether the risk level is acceptable to you. And if not you need to pass on this particular item. I do have to note that the manual stage/wafer chuck( adjustment knobs are bent just a bit on both sides. So when you are moving it side to side they have an eccentric motion, not outrageously so, but
|
|
|
MJC 200mm wafer prober, 8" Wafer Prober
MJC wafer prober MJC Wafer Prober for up to 200mm Wafers Includes calibrated B&L stereo zoom 7 optics. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1432ef882a7-0x104-
|
|
|
(jn 0) 4 5/8" Gold Probing Prober Station Wafer Chuck
This wafer chuck is in good used condition with some definite marks and scratches. This unit is mounted to a 4"x4" base and has multiple cut wires and hoses coming from it. I have no way to test the unit so it is being sold as is. Thank you for visiting our on-line store! If you have any questions. Just send us an email through eBay messaging. We strive to answer all questions as soon as possible. NOTE ON SHIPPING: Shipping is free for all U.S. customers living in the lower 48 contiguous states. All items will be shipped within 1 business day of completed payment. If you live in Alaska. Hawaii, or Puerto Rico, your item will be shipped via USPS Parcel Select and can take up to 9 days to arrive. If you would like the item shipped USPS Priority Mail. Please send us an email through eBay for additional shipping charges. NOTE FOR INTERNATIONAL ... moreCUSTOMERS: Please send us an email through eBay for a quote on shipping. All customs fees. Duties, import taxes, and related charges are solely your responsibility to pay. We have no ability to estimate those cost so please contact your local post office prior to bidding to understand your financial responsibilities upon arrival. The number code in parenthesis at the beginning of the title is an internal company inventory code. It is in no way affiliated with the actual title. Please do not hesitate to contact us with any questions or comments. Prompt. Friendly, and accurate service is our main priority.
|
|
|
Karl Suss PM-8 Analytical Wafer Prober Manual Probe Station +6" Temptronic Chuck
Template By Froo! Karl Suss PM-8 Analytical Wafer Prober Manual Probe Station +6" Temptronic Chuck· WHAT IS IT? This listing is for(1) refurbished Karl Suss PM-8 Analytical Wafer Prober. This manual Probe Station(serial number 4321) has the long rail bridge mount option with Fine Motion Adjustment. It comes with the following: 6" Temptronic ThermoChuck with mini-chamber and Karl Suss Air Dryer Mitutoyo Microscope with WF10x/24 Eye Pieces. M Plan APO x2, 10, and 20 Objectives, and LampLink Illuminator(fiber cable not included) Anti-Vibration Isolation Pillars NetzGerat EA-3008/24 Power Supply*This sale includes these listed components ONLY. No other unseen or unmentioned parts or accessories will be included. DOES IT WORK? YES The PM-8 Prober was serviced in September 2013 and all mechanical components are functioning properly. ... moreMeaning the bridge mount, stage, and chuck all move firm and freely as they are supposed to. Any damaged or worn components have been replaced. The rest of this system has been checked as follows: The power supply powers on and controls the stage as intended. No other testing performed The illuminator powers on but we do not have the fiber cable to test it further The air dryer powers on and does not display any errors. But it have not been tested any further The Microscope and objectives have no sign of obvious damage and are believed to be in good working order This is a near-complete system. But additional parts, labor, calibration, and/or installation may be required and should be expected. We are NOT guaranteeing that this sale includes everything that YOU may need to get up and running at your facility, but we warranty the PM-8 Probe Station is fully functional and will be professionally packaged and shipped so that it works as intended upon delivery. All other components are being sold as-is, as-pictured with no warranty. HOW’S IT LOOK? Good, some minor cosmetic scuffs or blemishes(see photos) HOW WILL THIS SHIP? Freight or local pickup only. 1) skid with wrap include
|
|
|
Rucker & Kolls Electro Glas 1032 Lab Automatic Wafer Prober Inspection Station
Search our eBay Store! Rucker& Kolls Electro Glas 1032 Lab Automatic Wafer Prober Inspection Station SKU: JV-DYL-C-RK1032 Condition: For parts or not working Packaging: Pallet/Skid Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Rucker& Kolls 1032 Lab Automatic Wafer Prober Station. Model: 1032. This unit includes a Bosch& Lomb StereoZoom 7 with 10x-70x zoom range. Physical Condition: Fair. Minor scuffs and scrapes. Signs of previous use. Unit powers on and LED display illuminates showing“FAULT 32” Buttons appear unresponsive. CART IS NOT INCLUDED. BEING SOLD AS-IS FOR PARTS OR REPAIR Dimensions(L"W"H" ... more29*32*20. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: SVC ASSET MANAGEMENT. INC. 1096 PECTEN CT MILPITAS. CA 95035 Open Monday through Friday 10AM-6PM PST(California) 1(877)757-3863 If you're dissatisfied with your purchase. Please contact us before leaving feedback or opening a case. Let us save
|
|
|
Electroglas 2010-CX Wafer Prober TC2000 Semicondictor Hot Chuck Temp Controller
Search our eBay Store! Electroglas 2010-CX Wafer Prober TC2000 Semicondictor Hot Chuck Temp Controller SKU: HS-TER-C-ELECTROTC2000 Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Electroglas Xynetics TC-2000 Temperature Controller for 2010-CX Wafer Prober Model: TC-2000 110/125V; 330W; 60HZ; 3A; 1-PHASE Physical Condition: Good; scuffs/scratches. Unit was pulled from a working Electroglas 2010-CX Wafer Prober System. Unit powers on with working fan and display. UP” DOWN buttons are responsive. Power cable is not included. We do not have the necessary resources in our facility to further ... moretest this unit. Dimensions(L"W"H" 11 1/2* 7 3/4* 5. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: SVC ASSET MANAGEMENT. INC. 1096 PECTEN CT MILPITAS. CA 95035 Open Monday through Friday 10AM-6PM PST(California) 1(877)757-3863 If you're dissatisfied with your purchase. Please contact us before leaving feedback or
|
|
|
C90637 Cascade Microtech PS300 Parametric Serie 12" Automatic Wafer Prober
Click to Enlarge) Product ID# C90637 This Cascade Mirotech PS300 Parametric Serie 12" Automatic Wafer Prober looks to be in good cosmetic condition. Showing some signs of wear. Its power cord has five wires(three line wires, a neutral wire and a ground wire) but we do not have any five wire power outlets in our warehouse, so I have no way of powering it up or testing it, and it is being sold as-is. It comes with a Monitor/Keyboard/Joystick assembly, as shown, howevever I'm not sure where it is supposed to mount on the machines, and I'm not sure how to hook it up. This machine has a number of loose cables, which I'm not sure where they are supposed to plug into. Please see the photos above for detail. Approximate overall unpacked dimensions: 56"L x 54"W x 50"H. Please ask questions or indicate concerns prior ... moreto bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 1660 pounds Buyer pays freight plus a fixed handling fee of 30 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid fo
|
|
|
C89123 Rucker & Kolls R&K 1032 Wafer Prober Probe Station
Click to Enlarge) Product ID# C89123 This Rucker& Kolls R&K 1032 Wafer Prober Probe Station looks to be in decent cosmetic condition. Showing some signs of wear. I hooked it up to my air compressor, and powered it up, and the digital display comes on, but I could not get it to do much of anything. I pressed all of the buttons, but none of them had an effect, other than the"Lamp Override, which only made the"Lamp On" light illuminate. It is being sold as-is, for parts or repair. Approximate overall unpacked dimensions: 32"L x 29"W x 17"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping ... moreLTL Freight. The unpacked weight of this item is 172 pounds Buyer pays freight plus a fixed handling fee of 0 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Auction Ter
|
|
|
C97634 Lot 3 Micromanipulator 6000 Wafer Prober Probe Station (parts/repair)
Click to Enlarge) Product ID# C97634 This lot includes three Micromanipulator 6000 Wafer Prober/ Probe Stations. As shown. They are all in need of some work, and are being sold as-is, for parts or repair. One of them features a 5" Chuck, and the other two feature 4" Chucks, but the 5" one and one of the 4" ones are not secured in place. There are a variety of microscope parts also included, as shown. I have not evaluated the condition of the optics. No eyepieces or objectives are included. This lot includes everything shown in the photos above, so please see the pictures for details. If you do not see it in the photos, it is not included. Sold as-is. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, ... moreunless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 0 pounds Buyer pays freight plus a fixed handling fee of 40 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. W
|
|
|
Signatone S-1007 Wafer Probing Prober Probe Station with Temptronic Chuck
Signatone S-1007 Wafer Probing Prober Probe w/ TempTronic Chuck For sale is a Signatone S-1007 Wafer Probe Station with TempTronic Chuck with Bausch and Lomb Microscope. Note: Please feel free to call or email with any questions. We would be happy to provide additional information. tkole@shadowmicrotek.com 408 705 0172 Shipping Shipping charges are the responsibility of the buyer. We can provide assistance with providing options for freight providers for the loading and shipment of this item. Payment Methods Accepted Wire Transfer or Company Check payment methods are preferred. PayPal can be used but is subject to an additional 2.9% fee. All payment methods are subject to clearing into our account prior to shipment of the oven.
|
|
|
M94654 KLA Instruments KLA1007-47 Semi-Automatic Wafer Prober System
Click to Enlarge) Product ID# M94654 This KLA Instruments KLA1007-47 Semi-Automatic Wafer Prober System appears to be in good cosmetic condition. With signs of wear and previous use. I connected the unit to power, unfortunately, the only response I received was a temporary sound from the power source(bottom right of the unit) as if it did want to turn on. The unit has a 6¼” gold chuck with three wafer lift needles. However I lack the knowledge and proper equipment needed to formally test this unit; therefore it will be sold as is. Please see pictures for more details) Approximate overall unpacked dimensions: 36"x40"x51" Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the ... moreitem description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 1246 pounds Buyer pays freight plus a fixed handling fee of 30 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to re-qu
|
|
|
A83467 Electroglas 2010CX Wafer Prober 6" w/ Optem Scope
Click to Enlarge) Product ID# A83467 This Electroglas 2010CX Wafer Prober 6" w/ Optem HF Video Microscope looks to be in good cosmetic condition with signs of wear and previous use. I only have what is shown in the pictures. And I really lack the knowledge and equipment to test properly, so it is being sold as-is. Unpacked dims are 53*43*60. See pictures for more details. If more are needed please feel free to e-mail. It features a 6 inch wafer chuck along with PPC Power Control. PRM-2 Vision Module, and RMHM2 Controller. Due to the size of this unit. A custom made pallet will be required to ship it. The cost of the pallet will be paid for by the winning bidder. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless ... moreotherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 1011 pounds Buyer pays freight plus a fixed handling fee of 25.02 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will exp
|
|
|
C82338 Electroglas 2001X 6" Wafer Prober Probe Station w/ WaferMap Software
Click to Enlarge) Product ID# C82338 This Electroglas 2001X 6" Wafer Prober looks to be in good cosmetic condition. Showing some minor signs of wear. The people that we got it from say it is in good working condition. It powers up, as shown in the photos above, and I was able to access for wafermap software and navigate thru various menus and displays. However, I lack the knowledge and equipment to formally test it, and it is being sold as-is. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 0 pounds Buyer pays freight plus a fixed handling fee of 30 dollars(for DOMESTIC ... moreshipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Auction Terms. Upon end of auction. The winning bidder should proceed to"Check Out" and will be redirected to our Auction Checkout
|
|
|
Electroglas EG4080X Wafer Prober
Electroglas EG4080X Wafer Prober This system is sold as is. Where is and as shown. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-14504f91ab7-0x10d-
|
|
|
Electroglas EG3001X Wafer Prober & Mapping
Electroglas EG3001X Wafer Prober& Mapping This system is sold as is. Where is and as shown.
|
|
|
TEL P-8 WAFER PROBER CARDS CAGE w/ 9 Modules Cards
TEL P-8 WAFER PROBER CARD CAGE SYSTEM Descriptions Used system. Good condition, pulled from a Tel P-8 wafer prober system working. Please look over in the 7 photos for more detail. 1) MOTOROLA MODULE CARD MVME 147-023(1) TEL MODULE CARD TVB0004-1/ 147CON. 3281-000013-16, TOSHIBA HARD DRIVE 352MB MK1824FBV HDD2522(1) KLA IP MODULE CARD 710-806050-01 REV D2(1) KLA DP MODULE CARD 710-806051-01 REV AO(1) MOTOROLA MODULE CARD MVME 316(2) TEL MODULE CARDS TVB6004-1 QMC3. 3281-001184-17(1) TEL MODULE CARD TVB3102-1 SIO. 3281-000014-15, 3208-000014-14(1) TEL MODULE CARD TVB3401-1 GPIB. 3281-000019-13, 3208-000019-12 Total 9 modules cards in cage Local pick up free Used system. picture shown. Warranty 14 days warranty Payment Paypal Cashier check Personal/Company check(Note: Personal/company check will be held 5-8 business days for clearance. If you ... morepreferred to pay by credit credit(VISA/MC) Please register with Paypal; for their FREE online payment service. 8.75% sales tax will be applied if you are a California resident. Shipping& Handling Buyer pays fix amount shipping cost $35 in the 48 states. Canada. Alaska and Hawaii pay actual shipping cost Terms Payments must be received within 7 business days after our confirmation was sent to all winning bidder. Refund full amount but not include the shipping cost. Buyer pay freight cost when return the item. Contact Business Hour: Monday- Friday 9:00am- 6:00pm PST
|
|
|
KLA 1007 Wafer Prober
KLA 1007 Wafer Prober This system is sold as is. Where is and as shown.
|
|
 |