|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$24.46 Shipping Condition: Used Location: San Tan Valley, United States This unit was removed from service in good working and physical condition with minor wear from previous use.
Buy It Now
Free Shipping Condition: Used Location: Temple, United States
Buy It Now
$15.00 Shipping Condition: Used Location: Temple, United States P/N: 05218. Karl Suss Microtech Z- Axis Drive Motor Assembly. Sanyo Denki 103-715-6 Stepping Motor.
Buy It Now
$100.00 Shipping Condition: Used Location: Ireland Karl Suss MicroTec. Model 1000.
Buy It Now
$12.05 Shipping Condition: Used Location: Dallas, United States Karl Suss PH150 Microscope Inspection Micropostioner
Buy It Now
Condition: For parts or not working Location: Minneapolis, United States Click to Enlarge) Product ID# A111260 This Karl Suss MJB3 Mask Aligner. Type 401001 looks to be in decent cosmetic condition with signs of wear and previous ... moreuse(scratches, paint chips as shown) I could hear it power on. However I really lack the knowledge and equipment to test properly so it is being sold as-is. Features: Leitz Wetzlar microscope with Periplan GF 16X eyepieces. And Objectives H20X/0.40, NPL 5X/0.09, and 10X/0.18. Unpacked dims 30*24*18. See pictures for more details. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 110 pounds Buyer pays freight plus a fixed handling fee of 25 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Auction Terms. Upon end of auction. The winning bidder should proceed to"Check Out" and wil
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Karl Suss 116AA002 Kuhnke 65 127 Pneumatic Manifold 3 Solenoid is used untested surplus and is being sold as-is. The physical condition is fair, ... morebut there are signs of previous use and handling.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: 614PC105. This Karl Suss 614PC105 PCB Assembly is used untested surplus and is being sold as-is. The physical condition is fair, but there are ... moresigns of previous use and handling. Item Condition: Untested, Sold As-Is.
Buy It Now
Condition: For parts or not working Location: Phoenix, United States (1) Are you the end-user of this item?.
Buy It Now
Condition: Seller refurbished Location: Palisades Park, United States Feel free to contact us for additional information through ebay mail. Or directly at: nrscientific@gmail.com or at(201) 592-1864. Karl Suss- Suss Microtec ... moreMint condition. Model HR-100 Diamond Scriber Also called MS100- Manual Scriber For wafers and substrates up to100mm This scriber is provided with a 6 month. No-nonsense warranty. Quick shipment- International Shipments OK. For your reference. The seller is N&R Scientific Co. Inc. We have been providing the highest quality refurbished and fully guaranteed equipment worldwide for over 35 years. You can purchase with complete confidence that the equipment will be provided in excellent cosmetic and perfect operational condition. Our 50,000 square foot facility is located in the metropolitan NYC area. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Kindly contact us regarding suitable payment arrangements. We must also insure our shipments to guarantee safe delivery; hence, additional charges may be added to the purchase amount. F unit
Buy It Now
Free Shipping Condition: Used Location: Springfield, United States Power cable included.
Buy It Now
$17.70 Shipping Condition: Used Location: Bosque Farms, United States DECEMBER 2023. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured ... moreit is for testing purposes only unless it is attached or stated that it will be included.
Buy It Now
Free Shipping Condition: Used Location: Watsonville, United States This sale is for a Karl Suss Ph-500 Programmable Probe Positioner. We try to describe our item’s to the best of our knowledge, and technical experience.
Buy It Now
Free Shipping Condition: New Location: Temple, United States Model#260PC158. Karl Suss Microtech MA150 Mask Aligner.
Buy It Now
Condition: For parts or not working Location: Sherman Oaks, United States It will need a good cleaning and inspection before use. I am not sure that it has a lamp in it or if it does have a lamp if the lamp is working. It is ... morelocated in Sherman Oaks, CA just outside of Los Angeles and will need to be picked up.
Buy It Now
Free Shipping Condition: New Location: Temple, United States Karl Suss Microtech MA150 Mask Aligner.
Buy It Now
Condition: For parts or not working Location: Gilroy, United States 95020 (408)886-3700. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: 614PC103. This Karl Suss 614PC103 PCB is used untested surplus and is being sold as-is. The physical condition is fair, but there are signs of ... moreprevious use and handling. Serial numbers or country of manufacture may vary.
Buy It Now
Condition: For parts or not working Location: Gilroy, United States The eyepieces are 10X W.F.
Buy It Now
Condition: For parts or not working Location: Freehold, United States Karl Suss MJB3 Mask Aligner. Sold As Is .
Buy It Now
Free Shipping Condition: For parts or not working Location: Hollister, United States The physical condition of the unit is good and clean. It was removed from a Karl Suss ACS-200 coater developer. System Removed from: Karl Suss ACS-200. ... morePart#: RC8 ACS. Model#: CT 62. Condition: Non-working, being sold as-is.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Karl Suss KG 30022444 PCB Bauteile Board is used untested surplus and is being sold as-is. The physical condition is fair, but there are signs of ... moreprevious use and handling. Part No: 30022444. Serial numbers or country of manufacture may vary.
Buy It Now
Free Shipping Condition: New – Open box Location: Austin, United States These products are subject to export restrictions under U.S. law.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: 614PC168 / 260PC168. This Karl Suss 614PC168 / 260PC168 PCB Board is used untested surplus and is being sold as-is. The physical condition is ... morefair, but there are signs of previous use and handling.
Buy It Now
Condition: For parts or not working Location: Phoenix, United States Wafer Probing System. This item is being sold AS-IS.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Karl Suss 614PC166 PCB SoftPot Interface is used untested surplus and is being sold as-is. The physical condition is fair, but there are signs of ... moreprevious use and handling. Part No: 614PC166. Serial numbers or country of manufacture may vary.
Buy It Now
Free Shipping Condition: Used Location: Hollister, United States The physical condition of the circuit boards is good and clean. These products are subject to export restrictions under U.S. law.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: 260PC104. The physical condition is fair, but there are signs of previous use and handling. Serial numbers or country of manufacture may vary.
Buy It Now
Free Shipping Condition: New – Open box Location: Temple, United States Karl Suss Mask Aligner MA150 Inductive Proximity Sensor. Karl Suss Part#IFF 08.24.15/L.
Buy It Now
Free Shipping Condition: New – Open box Location: Temple, United States P/N: 01005006. Karl Suss Mask Aligner MA150 Transport/Load Arm.
Buy It Now
Free Shipping Condition: New – Open box Location: Milpitas, United States
Buy It Now
$38.91 Shipping Condition: Used Location: Salem, United States THIS IS A SUSS MIKROTEKPA200PB SC CONTROLLER MODEL 210AA076-01 WITH A VACANT"DIGITAL OPTIONS INTERFACE" SLOT. I HAVE NO WORKING KNOWLEDGE OF ... moreTHIS EQUIPMENT AND NO WAY TO TEST IT THEREFOR IT IS BEING SOLD AS IS. CONDITION UN-KNOWN. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WIHTIN 24 HOURS OF AUCTION CLOSING TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS UNIT WILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICES TO ANY LOCATION WITHIN THE"LOWER" 48 STATES PROVIDING IT IS PURCHASED AT THE"BUY IT NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL, OR BANK TO BANK WIRE TRANSFER. OTHERWISE. BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM SUBJECT TO PRIOR SALE*
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: 614PC116. This Karl Suss 614PC116 PCB Assembly is used untested surplus and is being sold as-is. The physical condition is fair, but there are ... moresigns of previous use and handling. Item Condition: Untested, Sold As-Is.
Buy It Now
Free Shipping Condition: Used Location: Ann Arbor, United States System Removed from: Karl Suss ACS-200. Model / Part#: RC8 ACS. Lift Gate Service We'll cardboard & wrap the unit to the pallet. The truck driver will ... moreplace your order on the ground, and you are responsible for bringing it inside.
Buy It Now
$57.10 Shipping Condition: For parts or not working Location: Schenectady, United States Green Impact. HVAC & Refrigeration. Everything included is shown in the photos. If there are multiple available for sale you may not receive the one photoed, ... morebut they are all in similar condition. Item Representation.
Buy It Now
Free Shipping Condition: Used Location: Hollister, United States This Karl Suss 614PC226 260PC226 Rev. 00 Circuit Board, is used working surplus. The physical condition of the unit is good and clean. It was removed ... morefrom a Karl Suss ACS-200 Coater Developer. Model#: 614PC226 260PC226.
Buy It Now
Free Shipping Condition: Used Location: Hollister, United States This Karl Suss 250AA229-01 Hot Plate Rev 6 (Karl Suss ACS200), is used working surplus. The physical condition of the unit is good and clean. It was removed ... morefrom a Karl Suss ACS-200 coater developer tool.
Buy It Now
Free Shipping Condition: Used Location: Hollister, United States This sale is for a Karl Suss Wafer Carrier Suss 116AA002 Mask Aligner, that is used working surplus. The physical condition of the carrier is good and ... moreclean.
Buy It Now
Condition: Used Location: Hollister, United States This sale is for a Karl Suss iEi PAC-106GW-R21 Computer, which is used working surplus. The physical condition of the computer is good and clean. It was ... moreremoved from a Suss ACS200 Coater system. System removed from: Suss ACS200 Coater.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: 614PC113. This Karl Suss 614PC113 PCB 16 Channel Input Board is used untested surplus and is being sold as-is. The physical condition is fair, ... morebut there are signs of previous use and handling.
Buy It Now
Free Shipping Condition: Used Location: Phoenix, United States Part Number(s): 614PC168 / 260PC168-04. This board was a used spare from a semiconductor fab that closed. The Board's Information Reads (1) Are you the ... moreend-user of this item?.
Buy It Now
$14.40 Shipping Condition: Used Location: Schenectady, United States Model:Probe manipulator. Top-Notch Service. It is not tested. Everything included is shown in the photos. If there are multiple available for sale you ... moremay not receive the one photoed, but they are all in similar condition.
Buy It Now
Free Shipping Condition: Used Location: South Korea
Buy It Now
Free Shipping Condition: Used Location: Hollister, United States The physical condition of the unit is good and clean. It was removed from a Karl Suss ACS-200 coater developer tool. These products are subject to export ... morerestrictions under U.S. law.
Buy It Now
$50.00 Shipping Condition: New Location: Costa Mesa, United States New Karl Suss MA6 Mask Holder For use with 6 inch Wafers, 7 inch MasksSoft, Hard and Vacuum Contact Capable
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Karl Suss 200.0644.6 CHUCK 6" SUSS Used. This Karl Suss 200.0644.6 is used working surplus. The physical condition is good, but there are signs of previous ... moreuse and handling. Serial numbers or country of manufacture may vary.
Buy It Now
$250.00 Shipping Condition: Used Location: Israel
Buy It Now
Free Shipping Condition: Used Location: South Korea
Buy It Now
Free Shipping Condition: Used Location: South Korea
Buy It Now
Condition: Used Location: Freehold, United States Light tight enclosure for wafer probers. Easy lift front panel. Cable ports on both sides of box.
Buy It Now
Free Shipping Condition: Used Location: South Korea SEMIPARTS SOLUTION.
Buy It Now
Free Shipping Condition: Used Location: Ann Arbor, United States AGAIN, this is NOT FOR THE KARL SUSS NANO HOT COLD PLATE WAFER TOWER UNIT shown in the first picture, only for the MICOTEC STEEL PRESSURED SEALED VAPOR ... moreCONTAINER SHOWN INSIDE THE RED COLOR CIRCLE. We'll cardboard & wrap the unit to the pallet.
Buy It Now
Free Shipping Condition: Used Location: Hollister, United States This Karl Suss ACS 200 35099-01 58299-01 A Digital Solenoid Module, is used working surplus. The physical condition of the unit is good and clean. It ... morewas removed from a Karl Suss ACS 200 coater. Part#: 58299-01.
Buy It Now
$13.24 Shipping Condition: New – Open box Location: Canyon Lake, United States
Buy It Now
Free Shipping Condition: Used Location: Hollister, United States This Karl Suss ACS 200 35098-01 58298 01 Digital Relay Output Module, is used working surplus. The physical condition of the unit is good and clean. It ... morewas removed from a Karl Suss ACS 200 coater. Part#: 58298 01.
Buy It Now
Free Shipping Condition: Used Location: South Korea SEMIPARTS SOLUTION.
Buy It Now
Free Shipping Condition: Used Location: South Korea
Buy It Now
$99.37 Shipping Condition: For parts or not working Location: Schenectady, United States Location: C4-1. Everything included is shown in the photos. If there are multiple available for sale you may not receive the one photoed, but they are ... moreall in similar condition. Condition:For Parts Only.
Buy It Now
$38.91 Shipping Condition: Used Location: Salem, United States THIS IS A SUSS MIKROTEKPA200PB SC CONTROLLER MODEL 210AA076-01 WITH A VACANT"DIGITAL OPTIONS INTERFACE" SLOT. I HAVE NO WORKING KNOWLEDGE OF ... moreTHIS EQUIPMENT AND NO WAY TO TEST IT THEREFOR IT IS BEING SOLD AS IS. CONDITION UN-KNOWN. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WIHTIN 24 HOURS OF AUCTION CLOSING TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS UNIT WILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICES TO ANY LOCATION WITHIN THE"LOWER" 48 STATES PROVIDING IT IS PURCHASED AT THE"BUY IT NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL, OR BANK TO BANK WIRE TRANSFER. OTHERWISE. BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM SUBJECT TO PRIOR SALE*
Buy It Now
Free Shipping Condition: New – Open box Location: Temple, United States Karl Suss Mask Aligner MA150 Inductive Proximity Sensor. Karl Suss Part#61000213. Balluff#BES 516-300-S170.
|
|
|
|
C98958 Karl Suss MJB3 Standard Mask Aligner w/ Splitfield Microscope type 401000
C98958 Karl Suss MJB3 Standard Mask Aligner w/ Splitfield Microscope type 401000(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C98958 This Karl Suss MJB3 Standard Mask Aligner with Splitfield Microscope(type 401000. S/n 1127) looks to be in good cosmetic condition, showing some minor signs of wear. It powers up, as does the illuminator. However, this is the extent of my testing of it, and it is being sold as-is. We recommend having this system crated for shipment, the cost of which will be the responsibility of the buyer. Approximate overall unpacked dimensions: 24"L x 22"W x 23"H. Here are links to a couple more pictures: Please ask questions or indicate concerns prior to bidding. ... moreBy placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 0.00 Pounds Buyer pays freight plus a fixed handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calen
|
|
|
Karl Suss PH150 Micromanipulator Micropositioner Probe head
Karl Suss PH150 Manual Micropositioner Probehead Vacuum base Stages accuate and move smoothly As with any used equipment it has a few surface scratches. Half of the vacuum hold down adjustment screw head is missing but it can still be adjusted. It appears to simply be a bored machine screw that had its head cut off and then the screw was slotted. 4 lbs shipping weight. Item is sold as shown We are unable to test the operation of the tool Photos show item you are bidding on All sales are final with no right of return or exchange. Ships only to US Item must be paid for within 3 days or it will be relisted DISCLAIMER OF WARRANTIES.THE EQUIPMENT DESCRIBED ABOVE, BEING SOLD, IS SOLD IN“AS IS” CONDITIONS AND THAT WE EXPRESSLY DISCLAIM HEREBY, ANY AND ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING FITNESS FOR A PARTICULAR PURPOSE. YOU’RE PAYMENT OF ... moreTHE GOODS AND EQUIPMENT INVOICED HEREON CONSTITUES ACCEPTANCE OF THIS DISCLAIMER Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
KARL SUSS PA200/300PB Controller for Prober 8" Wafer Station 210AA074-01
KARL SUSS PA200/300PB Controller for Prober 8" Wafer Station 210AA074-01 This item is in good condition and it comes with our 30 days warranty. Please read the following terms of sale carefully. These terms constitute a legally binding agreement( contract) between the seller and buyer. By bidding on. Or purchasing, the product posted in this eBay listing, the winning bidder agrees to and accepts all of the terms of sale stated below. TERMS OF SALE: Only what is shown in the eBay photo and mentioned in the listing is included. Anything else should be understood to not be included. For sale is for the eBay item only. No service or tech support are included, but if you have a question feel free to ask and we'll answer if we can. All sales are final. Please understand that this is an auction/liquidation environment, not a retail store, ... moreso make sure the item is right for you, before bidding. PAYMENT: We accept payment by Paypal. And we only ship to the address which the buyer provides within the Paypal payment, no exceptions. If you would like to pay with a non-Paypal payment method. Please contact us before bidding to see if we can arrange something. Buyers are given 7 days from winning bid to pay. And payment is expected of all winning bidders If no payment is made within 7 days. An unpaid item reminder will be filed with eBay, and the buyer forfeits the auction win. We are required by state law to collect sales tax on all items shipping to a CA address. CA sales tax may be waived at our discretion. But only with a valid CA resale certificate- please contact us for resale exception*before* sending payment. DOMESTIC(US) SHIPPING: Local pickup is normally not available; exceptions are sometimes made. But only for higher-value orders. Please contact us first to see if we can make this arrangement for you, don't assume that we will be able to. We charge flat-rate shipping. And there is no extra cost to ship to AK, HI, PR, or PO boxes, these are all fine. Shipping cost includes packaging cost including time
|
|
|
Karl Suss PM 8 Wafer Prober Station Manual PM8 base part
This is part of a Manual Karl Suss PM 8 Wafer Prober Station. Great physical condition. Type: 11500026 Nr. 4019 V: 110 VA: 24 Hz: 60 Contact me for a shipping quote You will receive the exact item pictured International buyer responsible for any customs fees
|
|
|
Micromanipulator Karl Suss KSM PH PM Series Micropositioner 130 / 150 Probe Head
Template By Froo! Micromanipulator Karl Suss KSM PH PM Series Micropositioner 130/ 150 Probe Head· WHAT IS IT? This listing is for(1) used Micromanipulator Karl Suss KSM PH PM Series Micropositioner 130/ 150 Probe Head. This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES IT WORK? We presume this item to be in good working order. However. We do not have the time, equipment, or expertise to test it further, which means that it is being sold as-is, as-pictured with the assumption and understanding additional calibration, parts or repairs may be required and should be expected. HOWS IT LOOK? Good to Fair. No major cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? Yes. But returns will only be accepted if the item is damaged during shipment. Or you receive the wrong item all together(buyer ... moreprotection) Right of Return(ROR) is valid for 14 days after initial receipt of item and does not cover buyer’s remorse. Please read the terms below for more information on our store. Policies, and details specific to this listing. About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. Payment Our ordering system is fully automated and powered by eBay and PayPal Secure Servers. If you purchase an item through our official store your payment is due immediately upon checkout. Item(s) are also available for sale through channels other than eBay and from time to time may be sold before the eBay auction ends. In which case we reserve the right to end the auction early. We will accept PayPal. Company Check, Personal Check, Bank Check or Major Credit Card. All funds must be in US Dollars
|
|
|
Karl Suss MA56 Mask Aligner for Photolithography
Karl Suss MA56 Mask Aligner for Photolithography Description Karl Suss MA56 Mask Aligner for Photolithography This unit has been factory rebuilt and is in excellent condition(New in 1986) Fitted for(4" four inch wafers using a 350W Exposure unit. X. Y, Omega Stage& Scope Manipulator, Cassette System with Prealigned Station, Utilities Required: Vacuum. Compressed Air, Nitrogen, Power(1.1kW) Hg. Exposure Optics& Vacuum Contact Tooling intact, Lamp power supply. Camera and Monitor not included. Dimensions; 46 W x 42 D x 58 H approximately 1200 Pounds, Manufacturer Karl Suss Manufacturer Part Number MA56 Item/Ship Weight 1200 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have ... moreany questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300. Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably not included. If you have any questions please contact us before bidding. Shipping This item requires palletized freight shipping. Transportation is the responsibility of the buyer. We are happy to assist in booking transportation for you and can add that service to your order for an additional cost. Please contact us if you would like a freight shipping quote. Local pickup is encouraged. For which you will not incur an additional fee. If you have any questions, we can be reached M-F from 9am to 5pm PST at(805) 648-3300. PID 36147 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shippin
|
|
|
Karl Suss Micromanipulator Micropositioner XYZ Linear Stage Axis
Normal 0 21 XYZ Linear Stage from Karl Suss: Could be used for e.g. optical setups or micromanipulation. All 3 linear motions are in good condition. Sold as is. Happy bidding. Sidulatikus 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13e796a8466-0xf8-
|
|
|
Karl Suss PA150 Semiautomatic Prober
200mm vacuum chuck. Mitutoyo FS-60 microscope with M Plan APO 10x, 20x, SL100X(super long working distance) 10x/24 eyepieces Sony DXC-107A video camera Suss power supply and joystick controller Integrated vacuum manifold. Optional: Karl Suss dark box with TMC isolation table(add: $8.500) Karl Suss micropositioners add $1,500 each, 5 available(photo 4) Crating and freight shipping required. Call 408-360-0380 to discuss.
|
|
|
Karl Suss Dark Box
Karl Suss Dark Box. Exterior dims 45 x 35 x 76″h(on table) interior dims 40 x 34 x 43″h. Includes TMC Micgro-G(model 632221802) vibration isolation table. Crating and freight shipping required, call 408-360-0380 to discuss.
|
|
|
Karl Suss PA-200 Semiautomatic Prober 8" (200mm) Wafer
Hypervision Visionary 2000 Emission Microscope System with a Karl Suss PA-200 1-8" Semiautomatic Probe System Comes with what you see in the pictures. If you don't see it. You probably wont get it. Specifications are from a third party and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. Everything looks complete and everything appears in great condition. I was able to power up the Karl Suss prober and the motors worked on the x and y stage and I was able to focus with the controls and rotate the chuck. I was also able to index the stage with stepping. We were not able to test the vacuum or the camera and there is no computer or software. Link to the Karl-Suss Prober Datasheet: The Main Unit's Serial Number Tag Reads: Model Number: Hypervision Visionary 2000 Serial Number: AV9517 The Hypervision ... moreCamera's Serial Number Tag Reads: Model Number: TCI-350-Y-37 Serial Number: 10722 1002 The Hypervision Camera Controller/Cooler's Serial Number Tag Reads: Model Number: TCI-350 Serial Number: 10722A The Karl Suss Prober's Serial Number Tag Reads: Type: PA200 Serial Number: 4633 Power Requirements: 110V. 400 VA, 60 Hz CE Marked: Yes Manufacture Date: 95 The Karl Suss Prober Controller's Serial Number Tag Reads: Model Number: PA200PB Serial Number: 230 Power Requirements: 110V. 44.0 VA Manufacture Date: 7/95 The Olympus Hyper Lens Information Reads: Type: OM-System Zuiko. Auto-S, 50 mm, 1:1.2 Serial Number: 112116 The Vibration Table's Serial Number Tag Reads: Model Number: MICRO-g 63-561 Serial Number: 12830 The HP Power Supply's Serial Number Tag Reads: Model Number: 6624A Serial Number: 3446A11521 Output Channel 1: 0-7V/0-5A or 0-20V/0-2A Output Channel 2: 0-7V/0-5A or 0-20V/0-2A Output Channel 3: 0-20V/0-2A or 0-50V/0-0.8A Output Channel 4: 0-20V/0-2A or 0-50V/0-0.8A GPIB Communications: Yes Description: Emission Microscope System for detecting defects unattained by other failure analysis techniques. Defective regions emit light and are visible
|
|
|
Karl Suss PH150 Manual Micropositioner Probehead
Just in from a local aerospace company sale comes this Karl Suss PH150 Manual Micropositioner Probehead. Product look new. But im not sure, never seen one before Paypal due immediately/ Local Pick-up available 8am-12noon weekdays from 91355/ CA sales tax required/ Ship Days M-W-F 8am-12noon, Location/ off1 projector shelf
|
|
|
Karl Suss PH400 Micromanipulator micropositioner micro-positioner
Karl Suss PH400 Probe Station Micropositioner. Vacuum base submicron positioner PH400 Positioner Specifications: X. Y travel 10mm. Z travel 8mm. Resolution 0.2 um. Similar to a PH120 PH130 PH150 We have lots of used and new positioners. Many brands to choose from Micromanipulator translation stages Just email us and I will list them for you. You can find needles and probe arms to fit all kinds of positioners(search) quater-research on the web
|
|
|
Karl Suss MA6/MA8 Maskholder (3" round opening for 5" masks)
Karl Suss MA6/MA8 Mask holder(3" round opening. For 5" masks) 3"75mm round exposure opening- For 5"x5" masks- Proximity contact capable(proximity flags) For use on any Suss MA6 or MA8 Mask Aligner Mask Holder is from a Silicon Carbide Semiconductor Company that closed its doors in May 2013.
|
|
|
Karl Suss 260MS195 Digital Video Control Unit
Karl Suss 260MS195 Digital Video Control Unit Karl Suss 260MS195 Digital Video Control Unit This Karl Suss 260MS195 Digital Video Control Unit powers up. No other testing performed, is in good physical condition and is being sold on an AS IS basis. Handling Charge: 9.95(included in shipping above) ESSSURPLUS is proud to have our 15.000+ repeat customer feedback for you to review. Thank you for looking. And Good Luck if you're bidding! Important: Auction winners have 7 days to complete the purchase of item(s) won. Feel free to contact our office for assistance in the completion of your transaction if you are having difficulty. The auction item will be relisted or sold after the 7 day window. Thank you for your assistance. Please Note: We DO NOT ship outside of the United States. However, Non-US buyers may have or find a US shipping address. ... moreCondition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground I will ship to: United States[Weight] 15 lbs. Shipping and Handling: Electronic Surplus Services a pretty image. with Vendio Research. Vendio provides powerful selling automation for sellers of all sizes. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
Lot of 3 KARL SUSS Micromanipulator Probe Positioner Manipulators
Lot of 3 KARL SUSS Micromanipulator Probe Positioner Manipulators The Manufacturer's Description. Lot of 3 KARL SUSS Micromanipulator Probe Positioner Manipulators ID 36713-KM What Condition is this Item In? These are used items that we have obtained from a liquidated facility. It comes as pictured and you can see its overall good condition. It was pulled from a working environment and appears to be operational. Please contact us with any additional questions you may have. Calibration. Additional Cost: TBD We can arrange for the calibration of your unit by an accredited calibration lab. If you choose to let us have your instrument calibrated. Please do not checkout until we have re-invoiced you. Contact Us. Please don't hesitate to contact us through eBay or over the phone! Email: sales@wesource.com Phone# 858) 693-1991 Website: You ... moremay return most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
|
|
|
KARL SUSS Micromanipulator Probe Positioner Manipulator (PARTS)
KARL SUSS Micromanipulator Probe Positioner Manipulator(PARTS) The Manufacturer's Description. KARL SUSS Micromanipulator Probe Positioner Manipulator(PARTS) ID 36714-KM What Condition is this Item In? This is a used item that we have obtained from a liquidated facility. It comes as pictured and you can see its overall good condition. It was pulled from a working environment and appears to be operational. Please contact us with any additional questions you may have. Calibration. Additional Cost: TBD We can arrange for the calibration of your unit by an accredited calibration lab. If you choose to let us have your instrument calibrated. Please do not checkout until we have re-invoiced you. Contact Us. Please don't hesitate to contact us through eBay or over the phone! Email: sales@wesource.com Phone# 858) 693-1991 Website: You may ... morereturn most undamaged items purchased at World Equipment Source's eBay store within 7 days of the original delivery. We will pay the return shipping costs if the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping costs and may be charged a restocking fee of 10 percent or $250.00. Depending on which one is lower. No returned merchandise will be accepted without a Return Material Authorization(RMA) World Equipment Source ships many types of delicate electronics all across the world. To insure safe delivery. We take special care when packing our items for shipment. For example, all test equipment and feeders are foam packed. Your handling fee during checkout will reflect the costs associated with safely shipping your item. By purchasing or bidding on our items. You signify that you accept our Terms and Conditions.
|
|
|
Karl Suss RC8 Spin-Coater
Karl Suss RC8 Spin-CoaterModel#200AA117 Serial#1824 110VAC 50/60 Hz 6.6A Software CT62 Motor assy ESA 22L 1205 CV rated for 3000 rpm max. Condition: kept in a class 1000 cleanroom. Working condition(can be demonstrated) Serial#1824
|
|
|
Karl Suss PM8 Probe Station (Incomplete)
Karl Suss PM8 Probe Station(Incomplete) The PM8 probe station is configured to serve as a platform for precise probehead positioning. During failure analysis. The faulty location of the device-under-test can be isolated by internal signal acquisition through an active probe. During product analysis, electrical characterization can be performed through a passive probe on the device-under-test. Please see the photos for clearer description. Condition: This item is a Used item and in good condition. We are unable to fully test this item and hence we are offering it on“AS IT IS BASIS" Please note, we are selling used, previously owned items and they are not new. They are being sold AS IS. When we say that an item is in good condition, we are stating that for its age it is in good shape. We do not claim that it is in brand new or like new ... morecondition unless we actually type the words new or like new. The many, detailed photos provided is a good guide to the real condition of the item. We guarantee that absolutely no re-touching of the images has been done. It is up to you, the buyer to view the images and decide for yourself whether the item is suitable for you or not. We will readily answer any questions/queries with regards to any one particular item and provide additional information/photos at your request. Shipping cost: Local pickup in Singapore could be arranged for FREE depending on the availability of consol to the place of delivery. For delivery to other destinations in the world kindly contact us for a quotation of the shipping cost. Delivery time: Unit would be packed and ready for shipment 1- 3 days after receipt of payment. Shipping note: Combine shipping is welcome to reduce total shipping cost. REF: MB1-2) Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Old Violin Bow Karl SUSS
Normal 0 false false false MicrosoftInternetExplorer4 Old Violin Bow Stamped: SUSS“ In my opinion. Pernambuco wood round stick, head with iwory tip, silver-nickel mounted and with a new hair. Ebony frog silver-nickel fitting and overlaid silver-nickel adjuster. Length: around 29.0 inches. 73.7cm. Stick: around 28.3 inches. 72.0cm. Weight: around 58.3gr. Bow is good playing condition. Straight& strong. Stick was repaired on the tail with a silver ring. I am not a violin& bow expert and I am just selling these items as described. All bows and violins come from a private collection– the original owner has been collecting the instruments for around 40 years. All items are sold as they are pictured in the photographs. Please. Consult the photographs to get an understanding of the items condition, technical aspects and quality as a musical ... moreinstrument, because I do not know and cannot judge, because I am not a violin or bow maker. International Shipping& Handling Cost(EMS Express Mail) $56. On Jul-04-13 at 12:22:48 PDT. Seller added the following information:
|
|
|
Karl Suss MA 150 Mask Aligner
Karl Suss MA 150 Used. But in working condition Available to show in person Local pickup only. Located in SF Bay Area. Buyer handles shipping and freight
|
|
|
Karl Suss MJB21 3" Wafer Mask Aligner w/2 505 Optical Energy Controllers+Cables
Karl Suss MJB21 3" Wafer Mask Aligner Type 10100008 with(2) Model 505 Optical Energy Controllers plus Cables*Powers Up! ~14 Day Right of Return~ FREE SHIPPING! Because of the Size& Weight of this item. Please NO INTERNATIONAL BIDDERS. S/N 517 S/N 370194 S/N 38045X Please note: This item is in GOOD cosmetic condition with some scratches from normal wear. See pics. This Unit powers up and was pulled from a working enviroment however it is out of our area of expertise thus we do not know how to properly test it. You are welcome to send questions about the item and if you are a local buyer you are welcome to come and inspect it prior to buying/bidding. Please call us for hours of operation. 626-472-7500. Unit carries a 14 Day Right of Return. Table is for picture purposes only and is not included with this item. Please Note: The total ... moreweight of this item including packaging is: 350 lbs. We will palletize this item for shipping. We will This item carries a 14 Day Right of Return provided that our warranty seals are intact and there is no evidence of user misuse; in order to allow the buyer time to confirm the unit is in working condition. And ONLY IF the item listed above is not as pictured or described in the listing. Items are as pictured below. If you are unsure about the completeness or condition of an item. Please contact us before placing your bid! Please read all of our terms of auction below before placing a bid. Terms of Auction: Payment arrangements are to be made within 3 days of purchase of item. You will receive an email from eBay with payment instructions and a place to tell us how you would like to complete your purchase. A courtesy Payment Reminder will be sent on the 5th day of non payment. Item will be placed back upon eBay if payment is not received within 8 days of the closing of the item. Only items pictured above are included in the listing. There are no manuals or power cords included unless otherwise noted in the picture or description. All items are sold AS-IS. Unless otherwise stated
|
|
|
Karl Suss PH150 Manual Probe Head
Fiber Optic Tools and Supplies BUY | SELL | TRADE surpluseq.com Description, Karl Suss PH150 Manual Probe Head Used Used Karl Suss PH150 Manual Probe Head Product Type: Type@ Model/Part No:PH150 Our Item ID: 253255 Description Specific Details: This used Karl Suss Probe Head Micropositioner is in good physical condition. There are some scratches on the unit due to normal wear. There are two micrometers(0-10mm) for XY axis movement control. Unit will require additional micrometer for full operation. Unit will also require gasket for vacuum base to function properly. Kindly contact us if you have further questions regarding this item. Actual item shown. Sold as pictured. Condition: Product Type: Used Terms of sales: Sold As-Is Physical Condition: Good Working Condition: Partially Functional Tested Condition: Tested 2.00 | 8.00 x 8.00 x 8.00 ... more| 0. Manufacturer"s Product Information: Description: The SUSS line of manual probeheads offers the advantages of proven high quality. Superior mechanical and ergonomic design, and complete product line compatibility. The SUSS PH150 has proved to be the most accurate and robust positioner on the market. By using the finest precision components and expert assembly techniques. SUSS achieves true submicron positioning with zero backlash. The PH150 incorporates an independent and uninfluenced XYZ stage system which is free of mechanical cross-talk deviation. Each stage is made of hardened steel and precision cross roller bearings assembled under exact torque measurements. In addition to superior mechanical design. SUSS always adheres to detail regarding ergonomics and flexibility. Each axis has 10 mm of travel with 50 or 100-tpi(threads per inch) high-resolution screws. The Z-axis screw is ergonomically located at the rear of the probe head body so as not to transmit finger pressure to the probe needle on touch down. The user has the choice of a Z axis with left or right-handed threads. The PH150 vacuum base system has superior holding strength. The entire footprin
|
|
|
KARL SUSS MIKROTEK PA300/200PB CONTROLLER JOYSTICK AND PANELS 4A PROBER STATION
THIS IS A USED KARL SUSS PA300/200PB CONTROLLER MODEL 210AA074-01 AND"JOYSTICK" UNIT FOR A PROBER STATION WITH(WHAT APPEAR TO BE NEW FRONT AND REAR"PANNELS" I HAVE NO WORKING KNOWLEDGE OF THIS EQUIPMENT AND NO WAY TO TEST IT THEREFOR IT IS BEING SOLD AS IS. CONDITION UN-KNOWN. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WIHTIN 24 HOURS OF AUCTION CLOSING TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS UNIT WILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICES TO ANY LOCATION WITHIN THE"LOWER" 48 STATES PROVIDING IT IS PURCHASED AT THE"BUY IT NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL, OR BANK TO BANK WIRE TRANSFER. OTHERWISE. BANK TO BANK WIRE TRANSFER ONLY! ... moreTHIS ITEM SUBJECT TO PRIOR SALE*
|
|
|
KARL SUSS MICROTEC SB6 VAC SB-6 WAFER SUBSTRATE BONDER w PC,SOFTWARE *POWERS ON*
KARL SUSS MICROTEC SB6 VAC SB-6 WAFER SUBSTRATE BONDER w PC. SOFTWARE Item Specifications Model: 105490/ SB6 VAC/ SB-6 VAC Comes with PC. Software and all/only parts/components/accessories as shown Unit's Description This unit is used and appears well-maintained. In good physical condition. It can be powered on as shown and the unit is pulled from a working environment. As we do not have the technical expertise to further test the unit, we are selling it on an"AS IS BASIS" We welcome inspection, please email us for details. Shipping We ship worldwide. Please email for a shipping quote. My Store | Follow us on Twitter for Real-Time Inventory Updates | Contact Us
|
|
|
MIXED LOT OF KARL SUSS MICROTEC MANUALS PROBER BENCH 5 PA200 PM300 PM8 AP6 ETC
PLEASE FEEL FREE TO MAKE AN OFFER ON THIS MIXED LOT OF SUSS MIKROTEK MANUALS. IT IS COMPRISED OF THE FOLLOWING: MASK ALIGNER PARTS ID MANUAL SUSS PROBER BENCH OPERATING SYSTEM MANUAL PA 200/ PM8 PM5'S WITH MANUAL PROBERS FOR PROGRAMABLE MICROSCOPES SUSS PRK/WIN PROGRAMMERS RESOURCE KIT FOR WINDOWS INSTALL AND USAGE GUIDE CORE PACKAGE FOR PROBER BENCH 5(MANUAL) CORE PACKAGE APPENDIX- USER REMOTE INTERFACE FOR PROBER BENCH 5 SUSS PROBER BENCH 2 ELECTRONICS MANUAL SUSS AP6 SEMI AUTOMATIC PROBE SYSTEM MANUAL SUSS PM300 USER MANUAL SUSS PROBER BENCH OPERATING SYSTEM MANUAL FOR PA300/ PA200/ PA150 SEMIAUTOMATIC PROBERS PROGRAMABLE MICROSCOPE EQUIPED PM300. PM8 AND PM5/ ANALYTICAL PROBERS AND PH600, PH500 PROGRAMABLE PROBEHEADS(THE RED BINDER IN THE PHOTO) PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WITHIN 24 HOURS OF AUCTION END ... moreTO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. IF THESE ITEMS ARE PURCHASED AT THE"BUY ME NOW" PRICE. THEY WILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICES TO ANY LOCATION WITIN THE"LOWER" 48 STATES. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES. BUSINESS CHECK. CASHIERS CHECK, PAYPAL OR BANK TO BANK WIRE TRANSFER. OTHERWISE, BANK TO BANK WIRE TRANSFER ONLY! THESE ITEMS ARE SUBJECT TO PRIOR SALE*
|
|
|
KARL SUSS MICROTEC PA SC 200PB CONTROLLER MODEL 210AA076-01 FOR PROBER STATION ?
THIS IS A SUSS MIKROTEKPA200PB SC CONTROLLER MODEL 210AA076-01 WITH A VACANT"DIGITAL OPTIONS INTERFACE" SLOT. I HAVE NO WORKING KNOWLEDGE OF THIS EQUIPMENT AND NO WAY TO TEST IT THEREFOR IT IS BEING SOLD AS IS. CONDITION UN-KNOWN. PAYMENT AND SHIPPING TERMS: THE BUYER MUST MAKE CONTACT WIHTIN 24 HOURS OF AUCTION CLOSING TO ARRANGE PAYMENT AND SHIPPING. PAYMENT MUST BE RECEIVED WITHIN FOUR DAYS OF AUCTION CLOSING. THIS UNIT WILL BE SHIPPED FOR FREE VIA FEDEX GROUND SERVICES TO ANY LOCATION WITHIN THE"LOWER" 48 STATES PROVIDING IT IS PURCHASED AT THE"BUY IT NOW" PRICE. ACCEPTED METHODS OF PAYMENT: IF THE BUYER IS LOCATED WITHIN THE 50 STATES, BUSINESS CHECK. CASHIERS CHECK, PAYPAL, OR BANK TO BANK WIRE TRANSFER. OTHERWISE. BANK TO BANK WIRE TRANSFER ONLY! THIS ITEM SUBJECT TO PRIOR SALE*
|
|
|
Karl Suss MJB3 HP UV200 Deep UV Research Mask Aligner
KARL SUSS MJB3 HP UV200 Deep UV Research Mask Aligner Inventory# 58277*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Deep UV Research Mask Aligner. Submicron mask aligner with vacuum contact. Proximity or soft contact alignment modes. 210 to 230nm spectral range at up to 350W. Resolution down to 0.2 micrometers maximum. High precision X,Y, Theta alignment stage. Normal field microscope. Wafer size from small pieces to 3 in. dia. 110V, 60 Hz. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, ... moreor for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
|
|
|
Karl Suss MA6 Mask Aligner
Karl Suss MA6 Mask Aligner Inventory# 56345*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Mask Aligner. Resolution into the submicron region. Silicon and compound semiconductor wafers up to 150mm dia. Wafer size determined by mask and chuck size chosen. Ask salesman for sizes available. Split field alignment microscope. CIC500 500W lamp power supply. Wavelength: 360nm to 400nm. Currently configured for topside alignment only. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any ... moreof your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
|
|
|
Karl Suss MA150 Mask Aligner with Manual Substrate Handling
Karl Suss MA150 Mask Aligner with Manual Substrate Handling Inventory# 57801*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Mask Aligner with Manual Substrate Handling. Contact or proximity mask aligner. Manual substrate loading of wafers. Partial wafers, substrate and special material processing. Lamp housing and power supply capable of using UV lamps up to 1000W 365-400nm. Capable of exposing substrates up to 150mm with appropriate chuck and mask option. Currently configured for 4 in. dia. wafers. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us ... morefor additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
|
|
|
KARL SUSS PSM 6 6 Inch Precision Manual Submicron Analytical Wafer Prober
KARL SUSS- PSM 6 Inventory# 57362*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. 6 inch Precision Manual Submicron Analytical Wafer Prober. Platen accepts vacuum or magnetic base probe manipulators. For probing internal geometries on wafers or substrates up to 6 inch diameter on a 6 inch vacuum chuck. Manipulator controlled XY microscope movement and convenient microscope lift. Bausch and Lomb MicroZoom microscope with three long working distance objectives. Stage alignment mechanism securely holds an air supported wafer stage in X. Y and Theta.The stage moves effortlessly across a lapped granite base plate that can be quickly vacuum locked in test position. Can be sold in untested as-is condition. Or fully checked out and refurbished ... moreby one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
|
|
|
KARL SUSS PM8 8 Inch Submicron Analytical Wafer Prober
KARL SUSS- PM8 Inventory# 58251*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. 8 inch Submicron Analytical Wafer Prober. Aluminum platen accepts vacuum probe manipulators. Not magnetic. provides the stability and resolution required for precise probe positioning. Submicron precision and stability. 8 inch diameter vacuum chuck. Mitutoyo microscope with long working distance objectives. Platen Z travel has 45mm of linear motion with a 400 micron contact/separation stroke. Fine glide chuck stage with 8 inch X-Y motion and automatic vacuum position lock. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact ... moreus directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-140a57743f0-0xf4-
|
|
|
KARL SUSS PROBE ARM
KARL SUSS- Probe Arm Inventory# 57619*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. For attaching microwave or RF probes to Karl Suss probe manipulators. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID ... moreSERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
|
|
|
KARL SUSS 6 Inch Manual Submicron Analytical Probe Station
KARL SUSS 6 Inch Manual Submicron Analytical Probe Station. Inventory# 58300*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Manual Submicron Analytical Probe Station. Precision prober for substrates up to 150mm dia. with Temptronic thermal chuck. But missing controller. Precision X-Y stage movement. Bausch& Lomb MicroZoom microscope with 2 long working distance objectives. Microscope movement and locking mechanism on large sturdy microscope bridge. Platen accepts magnetic or vacuum base probe manipulators. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please ... morecontact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
|
|
|
Karl Suss PM-8 Analytical Probe Station (with: Video, Laser, PH150/120 probers)
The sale includes all of the following items: 1) Karl Suss PM8(Type 11500085) 1/ea- objective) 100X/73 Nikon. 50X/45 CF Plan, 20X/35 Nikon, 10X/21 Nikon, 5X/13 CF. 2) CFI 10x/22 eye pieces(1) PM8 power supply[EA-3008/24] 1) Javelin video smartcam[JE3762DPS] 1) Javelin video control unit[JV2000] 1) Photonic Instruments optical fiber probe[2205] 1) Spectra Physics Laser. With pulse generator& foot peddle[337201-00] 1) LEP LTD power supply 6-12V. 1) Lens care kit(1 set) shipping hardware(1) Probe card probing fixture(1) 8" Ablation laser chuck& platon fixtures(1) Micromanipulator FET probe power supply[FET PS4] 1) PicoProbe arm- model 18C{serial# 12178} 1) PicoProbe arm- model 12C{serial# 10004} 1) PicoProbe arm- model 19C{serial# 11201} 3) Suss PH150/2 manipulators-vacuum base{serial# 53732. 57592, 53896} 1) Suss PH120 manipulators-vacuum ... morebase{serial# 24122} 2) PicoProbe tips[12C-4-35] 3) PicoProbe tips[12C-4-10] 3) PicoProbe tips[T-4-60] 5) PicoProbe tips[12C-4-22] 10) PicoProbe tips[T-4-22] 4) PicoProbe tips[18C-4-20]
|
|
|
Karl Suss Micromanipulator Micropositioner Probe head XYZ Stage
Karl Suss Micromanipulator Micropositioner Probe head XYZ Stage Used in very good condition. I'm not sure of the exact model number so please be sure to look at all of the photographs. This came from and R&D laboratory that made their own wafer handlers. They kept everything clean-room clean and this saw very little production use. Comes only with what you see in pictures. Items are guaranteed to be exactly as described. Comes with 14 day return policy. We want you to be satisfied with your purchases from us. WE HAVE MORE Turbo Pumps and Micromanipulators on eBay this week:
|
|
|
Karl Suss Model 505 Optical Energy Controller for MJB Mask Aligner System
This auction is for a Karl Suss Model 505 Optical Energy Controller. As you can see from the pictures. This uni is in nice, clean condition with minor wear. Unit powers up, all buttons function, and the cathode function appears to operate. However, I lack the accessories to test the other functiuons, so it will be sold as-is. Feel free to email me with any questions. Thanks for looking and happy bidding! Powered by The free listing tool. List your items fast and easy and manage your active items. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-141ec763c24-0x10a-
|
|
|
Bond Aligner - Karl Suss model BA 6 TYPE 105497 NR 315
Bond Aligner Karl Suss model BA 6 TYPE 105497 NR 315 Good condition- was removed from a working facility. TYPE 105497- s/n: RC 2339. The Karl Suss MA/BA6 can be used in two modes: mask align(MA6) for lithography and bond align(BA6) for wafer-to-wafer alignment followed by clamping or prebonding. Please contact us for more information and we would be glad to assist you. Buyer pays actual shipping cost(will vary obviously depending on location, so feel free to request a quote to your zip code)
|
|
|
Karl Suss RC8 MS3 Photoresist Spinner
Karl Suss RC8 MS3 Photoresist Spinner Inventory# 55647*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Unique design provides a better uniformity than conventional spin coaters. Reduces resist consumption by up to 50 percent. Fully programmable process parameters. Handles up to 8 in. round substrates. Depends on chuck installed) 110V. 60 Hz, CE. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of ... morethis size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Suss MicroTec/Karl Suss RA 120M Automatic Wafer Scriber
This auction is for a used Suss MicroTec/Karl Suss RA 120M Automatic Wafer Scriber SUSS MicroTec/ Karl Suss RA120M Includes: Wafer size: 4"100mm; RA120M Controller; RA120M Monitor; Two independent scribing axes(programmed separately) Parameters can be entered as either microns or mils; All parameters are entered via keypad; Display message prompts the user through the sequence of scribing steps; Three scribing modes: continuous. Edge, skip; Microprocessor controlled to accurately place the scribe lines with a precise force on the diamond tip We are selling this Suss MicroTec/Karl Suss RA 120M Automatic Wafer Scriber. In As-Is/Where-Is condition with no warranty or representations either expressed or implied. If you don't see it in the photos, you won't get it. If you need more photos let me know and I can get them for you. Please ... moreask questions or indicate concerns prior to bidding. This system looks to be complete but we are not knowledgeable about Suss MicroTec/Karl Suss RA 120M Automatic Wafer Scribers. We have not checked it out or tested it- so we do not know is condition. By purchasing this item you agree to all stated terms. All auction items are sold as advertised, As-Is/Where-Is without any warranty or representations either expressed or implied, unless stated in the item description. This item is available for inspection at our 40,000 square foot facility just outside Atlanta, GA. Packaging and/or crating services available onsite. Prior to sale. Buyer will contact seller to determine how the item will be packaged and shipped. The agreed to pricing for packaging and crating will be added to the listing prior to the purchase. For the following states: CA. GA, MI, PA, WA, and NC ship-to locations sales tax is required by law. Please contact seller for sales tax rates in any of these 6 states
|
|
|
Mint Karl Suss HR-100 Diamond Scriber - Suss MS100 / 100mm / Refurbished/Wrty
Feel free to contact us for additional information through ebay mail. Or directly at: nrscientific@gmail.com or at(201) 592-1864. Karl Suss- Suss Microtec Mint condition. Model HR-100 Diamond Scriber Also called MS100- Manual Scriber For wafers and substrates up to100mm This scriber is provided with a 6 month. No-nonsense warranty. Quick shipment- International Shipments OK. For your reference. The seller is N&R Scientific Co. Inc. We have been providing the highest quality refurbished and fully guaranteed equipment worldwide for over 35 years. You can purchase with complete confidence that the equipment will be provided in excellent cosmetic and perfect operational condition. Our 50,000 square foot facility is located in the metropolitan NYC area. Please note: for purchases of this size. We are unable to accept credit cards or PayPal ... moreunless special arrangements are made. Kindly contact us regarding suitable payment arrangements. We must also insure our shipments to guarantee safe delivery; hence, additional charges may be added to the purchase amount. F unit
|
|
|
Karl Suss PA200 200mm Semiautomatic Wafer Probe System with Heated Chuck
Karl Suss PA200 200mm Semiautomatic Wafer Probe System with Heated Chuck Inventory# 58801*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Precision and stability for submicron probing on substrates up to 200mm dia. Fully operational with or without PC controller. Mitutoyo microscope with long working distance objectives. 200mm dia. temperature chuck with a temperature range of 0 to +130 deg C. Capable of 200mm by 200mm travel. 115V. 60 Hz. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, ... moreor for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
C106465 Karl Suss AL300 Large Gap Alignment Split-Field Video Microscope w/ DVCU
Click to Enlarge) Product ID# C106465 This lot of Karl Suss equipment comes with everything shown in the photos above. These items all came to us in one box. So I assume they go together. There is a manual included for a"SUSS Digital Video Control Unit and AL300 Large Gap Alignment System, which has some schematics inside, but no images of what the actual units should look like. The DVCU is obviously included, as shown, along with the split-field microscope featuring an Olympus U-TR30 Head with WH10X/22 Eyepieces, and an Olympus U-TV1 X Video Adapter with CCD Camera. There are cables included for connecting the two sides of the split-field microscope to the DVCU, but there are no cables to connect to the"AL300" connections on the DVCU, or any corresponding connection on the split-field microscope, so I assume the"AL300" ... moresystem is not a part of this assembly. Please see the photos above for detail. If you do not see it in the photos, it is not included. The DVCU powers up, and its power light illuminates. However, the power outlet on the DVCU meant for the Video Monitor is not putting out any voltage. The monitor powers up fine when you plug it in with its own external power cord. Approximate overall unpacked dimensions: 25"L x 19"W x 18"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of 250 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 68 pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments.We do not process orders nor ship on weekends
|
|
|
Karl Suss PH 150 Vacuum Base Precision Probe Manipulator (Tag #08)
Karl Suss PH 150 Vacuum Base Precision Probe Manipulator Inventory# 58807*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor ... moreand Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Karl Suss PH 120 Vacuum Base Precision Probe Manipulator (Tag #65)
Karl Suss PH 120 Vacuum Base Precision Probe Manipulator Inventory# 58808*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. More units available each at price above. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting ... morethe equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-143db7b1b0d-0xea-
|
|
|
Karl Suss PM-8 Analytical Wafer Prober Manual Probe Station +6" Temptronic Chuck
Template By Froo! Karl Suss PM-8 Analytical Wafer Prober Manual Probe Station +6" Temptronic Chuck· WHAT IS IT? This listing is for(1) refurbished Karl Suss PM-8 Analytical Wafer Prober. This manual Probe Station(serial number 4321) has the long rail bridge mount option with Fine Motion Adjustment. It comes with the following: 6" Temptronic ThermoChuck with mini-chamber and Karl Suss Air Dryer Mitutoyo Microscope with WF10x/24 Eye Pieces. M Plan APO x2, 10, and 20 Objectives, and LampLink Illuminator(fiber cable not included) Anti-Vibration Isolation Pillars NetzGerat EA-3008/24 Power Supply*This sale includes these listed components ONLY. No other unseen or unmentioned parts or accessories will be included. DOES IT WORK? YES The PM-8 Prober was serviced in September 2013 and all mechanical components are functioning properly. ... moreMeaning the bridge mount, stage, and chuck all move firm and freely as they are supposed to. Any damaged or worn components have been replaced. The rest of this system has been checked as follows: The power supply powers on and controls the stage as intended. No other testing performed The illuminator powers on but we do not have the fiber cable to test it further The air dryer powers on and does not display any errors. But it have not been tested any further The Microscope and objectives have no sign of obvious damage and are believed to be in good working order This is a near-complete system. But additional parts, labor, calibration, and/or installation may be required and should be expected. We are NOT guaranteeing that this sale includes everything that YOU may need to get up and running at your facility, but we warranty the PM-8 Probe Station is fully functional and will be professionally packaged and shipped so that it works as intended upon delivery. All other components are being sold as-is, as-pictured with no warranty. HOW’S IT LOOK? Good, some minor cosmetic scuffs or blemishes(see photos) HOW WILL THIS SHIP? Freight or local pickup only. 1) skid with wrap include
|
|
|
Mimir 505 Optical Energy Controller Lamp Power Supply For Karl Suss Mask Aligner
Payment Policy New Page 1 Brand New Sony CyberShot 8 MP Di Mimir 505 Optical Energy Controller Lamp Power Supply For Karl Suss Mask Aligner Attention All Buyers If there is anything wrong with the item that you have purchased. Please do not leave negative feedback and do not open any disputes with eBay or PayPal. Just contact us directly and we will fix the problem quickly. Item Description Mimir 505 Optical Energy Controller Lamp Power Supply For Karl Suss Mask Aligner Used Condition Mimir Instruments 500-Series Optical Energy Controller Power Supply Model: 505C Voltage: 120V. 450W, 50/60 Hz Serial No. 370224 Mimir Lamp Power Supply/ Karl Suss Mask Aligner Power Controller Lamp Power Supply for Lamp: 350W Rated 400W High 275W Idle 200W Low With AC Power Cord Inventory Number: 20C93755-02-14 Item Condition Used Condition Actual Picture of ... morethe item is provided. What you see in the picture(s) is what you get Note: In Quantity Auctions. The serial number of the item that you receive may vary from the item shown above. Payment Policy 1) PayPal: We accept PayPal from all verified accounts. Note: For large payments or payments from some foreign countries we may require other electronic means of payment instead of PayPal. 2) Credit Cards: We accept credit card payments through PayPal only. 3) Checkout: All US buyers should follow eBay checkout process to receive the proper invoice. International buyers should contact us to for an update on the shipping costs before they can follow eBay checkout. 4) Sales Tax: Californian buyers pay a Sales Tax of 8.625% unless a valid Resale Certificate or Tax exemption Certificate number is remitted by email or fax prior to submitting payment. 5) Checkout: An automated Non-Paying Bidder Alert will be filed if payment is not received in 4 days from the end of the auction. 6) Questions: For any questions. Please contact us directly from the auction page click on our ID(supertechshop) and then click on(Contact Seller) link. Shipping& Handling Policy 1) Handling Time: We ship package
|
|
|
Karl Suss Type CIC500 Power Supply For MA56 Mask Aligner S/N 50475
You are Bidding on: Karl Suss Power Supply For MA56 Mask Aligner 100V 50/60 Hz Type CIC500 S/N: 500475 100V 50/60 Hz Sales Tax: 8.00% sales tax is applied to all orders in California I guarantee all my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in the same condition you received it for a full refund. I really appreciate your bids. CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS
|
|
|
Karl Suss MA6 manual Mask Aligner - 4" inch wafers
Marketing information from VendorStockroom Experts in Semiconductor Equipment. Spares, Support +44(0)2380 760909 Karl Suss MA6 Mask Aligner Manufacturer: Karl Suss Model: MA6 Description: S et up for 4" wafers and 5" masks(capacity for up to 6" wafers) Frontside Alignment. Manual handling. Includes user manual. Condition of the tool is unknown. It was in working condition prior to it recent de-installation. Refurbishment and Installation can be provided at additional cost Please see our other ebay listings. For more information or to dicuss your requirements please call +44(0)2380 760909 OR click the"Ask a Question" link at the bottom of this page OR e-mail Terms& Conditions- Please Read Carefully Before Buying! Ownership of Items This item is owned by U4Global Solutions Ltd. and in storage at our facility in ... moreSouthampton. United Kingdom. Equipment is available for inspection prior to purchase. Payment Payment 100% Prior to shipping by PayPal or wire transfer Please contact us for bank details Please note there is a 20 $/£/€ Charge for wire transfers Shipping We ship worldwide and can use various packing and delivery services. From pallet& ground to full crating for air or ocean freight. Therefore the price displayed for Postage/ Shipping is an Estimate Only and DOES NOT Include Packing& Crating for Freight Items Contact us BEFORE BUYING for an accurate packing& shipping quote If you checkout and pay for an item using the estimated Postage/ Shipping estimate your goods will not be shipped until an accurate packing and shipping quote is obtained and paid in full Warranty& Returns Unless otherwise stated we offer no warranty and no returns- Goods are sold As Is You should contact us with any questions and/ or arrange inspection BEFORE BUYING Tax& Duty All prices are exclusive of tax and duty For end users in UK VAT will be payable and added to the total cost For end users in Europe VAT may be payable and added to the total cost(depending on status& location)
|
|
|
Karl Suss PSM6 6 inch Submicron Manual Prober
Karl Suss PSM6 6 inch Submicron Manual Prober Inventory# 58876*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. 6 inch diameter chuck. Linear platen Z movement adjustable over 2mm range. Backlash free X. Y and Z movement. Bausch& Lomb microscope with long working distance objectives. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless ... morespecial arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Karl Suss PM-8 8" (200mm) Semi-Automatic Probe Station
Description: Karl Suss PM-8 Semi-Automatic Probe Station Item is used. But has been tested by Karl Suss certified service engineer. Accommodates up to 8” 200mm) Wafers Ambient DC Chuck Granite Base with FIne Glide Stage Mitutoyo Finescope with 10x Eyepieces. 2x, 10x, 20x Objectives Fiber Optic I lluminator Vacuum Manifolds Probe Card Holder 50mm x 50mm Motorized Microscope Movement Microscope Movement Control Electronics and Joystick New Windows PC with Monitor. Keyboard and Mouse, and Prober Bench Software Vibration Isolation Table Options: Installation and Training Available New Wave Research EZ Laze II Green/UV Available Karl Suss PH150 Micropositioners Available Shipping& Handling: Freight- contact us for shipping quote This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. ... moreare not included unless pictured or described. If you have any questions. Please contact us before purchasing. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14572b926e5-0x114-
|
|
|
Karl Suss Ignitor Power Supply Controller Prober Aligner Bonder ??
Karl Suss Ignitor Power Supply Controller Prober Aligner Bonder? This is used- untested. Came out of a govt surplus auction. Not sure what it is or what it's used for. Please look at the photos for the best description. Will ship international- please email for quote as this is very heavy.
|
|
|
Karl Suss MA1006 Refurbished Guaranteed
Manufacturer: Karl Suss. KARL SUSS MA1006 MASK ALIGNER 1000 WATT POWER SUPPLY 1 MICRON RESOLUTION ON 6" WAFERS SPLIT FIELD MICROSCOPE WITH 6 OBJECTIVES The refurbished Karl Suss MA1006 comes with a 30 day warranty. Extended warranties are available for an additional cost)
|
|
|
Karl Suss CIC1000 Constant Intensity Controller For Mask Aligner 1000 Watt
Karl Suss CIC1000 Constant Intensity Controller For Mask Aligner 1000 Watt Good cosmetic condition. Guaranteed to be working perfectly. Packed professionally in Instapak 2 part foam for added shipping security! NO 3rd party shipping on buyer accounts California residents must pay 8.5% Sales Tax. Businesses purchasing for resale must provide CA state tax ID information. Payment is due within 7 days of auction's end. Buyer pays for shipping SEE BELOW. When possible. Multiple items will be shipped together to reduce shipping costs. Insurance for the amount of the auction is included in the shipping price. Flat fee shipping amounts apply to lower 48 states ONLY! OVERSEAS BUYER PLEASE CONTACT ME REGARDING ACCEPTED PAYMENT METHODS BEFORE MAKING A PAYMENT. If you need additional information or have any questions. Please contact me BEFORE placing ... moreyour bid. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Listing created with from Black Magik Software.
|
|
|
KARL SUSS MODEL 505 OPTICAL ENERGY CONTROLLER FOR MJB MASE ALIGNER SYSTEM
ebay template B argain S urplus Report Description Info Info KARL SUSS MODEL 505 OPTICAL ENERGY CONTROLLER FOR MJB MASE ALIGNER SYSTEM. This item is in fair to good physical condition with only minor signs of wear and tear such as some small scratches. Scuffs and sticker residue. It has been plugged in and powered on but no further testing has been done. It does NOT come with any accessories. Important Info: Hours of operation are M-F 7:30AM-4PM Eastern time. ALL PICKUPS MUST BE SCHEDULED AHEAD OF TIME AND PAID FOR BEFORE PICKUP. YOUR APPOINTMENT MUST BE CONFIRMED BY SOMEONE BY PHONE OR EMAIL BEFORE PICKUP. All items sold AS-IS unless otherwise stated. Returns. If accepted, are subject to a restocking fee if Bargain Surplus is not at fault for the return. The buyer agrees to pay for return shipping on an item. Please do not assume anything ... moreis included in this listing unless it is specifically stated in the listing. If you are unsure. Please ask. Feedback Policy- We work very hard to provide exceptional service to our customers and hope that you will be satisfied with our awesome deals. However. If you are disappointed for any reason, please contact us before leaving feedback in order to give us the opportunity to resolve your issue. Customer satisfaction is very important to us and we always strive for a satisfactory result. ALL PICKUPS MUST BE SCHEDULED AHEAD OF TIME AND PAID FOR BEFORE PICKUP We do not ship items on the weekend. Items are shipped in the order that payment was received. If you are paying for upgraded shipping. You should contact us to request that your item be moved up in line. Otherwise, it will ship in the order it was received. No PO Boxes. APOs or FPOs. WE SHIP INTERNATIONALLY USING EBAY'S GLOBAL SHIPPING PROGRAM. PLEASE INQUIRE WITH EBAY FOR MORE DETAILS ABOUT THE PROGRAM We do NOT ship USPS under any circumstances. Please do not bid expecting your item to ship by USPS. Items are eligible for pickup unless otherwise stated. You will be provided with our address after winning an auc
|
|
|
Karl Suss FC 150
Karl Suss FC 150 Condition: Used. As-Is, Where-Is Location: South Korea g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-146abe51190-0x114-
|
|
|
Karl Suss PA200 Semiautomatic Wafer Probe System w/ PA200B Controller & Camera
Karl Suss PA200 Semiautomatic Wafer Probe System w/ PA200B Controller& Camera A Karl Suss Semiautomatic Wafer Probe System. This item has a Mitutoyo head with a M Plan APO 10(0.28. 00/0 f=200) Objective and a M Plan 2(0.055, 0/00 f=200) Objective. The PA200B and the Mitutoyo Illuminator both turn on. We plugged the PA200B controller into the PA200 probe system and the PA200 emergency stop switch turns off the PA200B so there is a connection there. We could not test this item any further as we do not have the air hoses to test the pneumatics. Tag on the main item reads: P/N: PA200 Nr. 4619 V: 110 VA: 400 Hz: 60, Controller tag reads: P/N: PA200B S/N: 204PP V: 110 VA: 440 Mfg Date: 12 94, Camera: FIND-R-SCOPE 2200NM Type: 2653, Mitutoyo illuminator: P/N: 378-664, Please take a look at all of the provided photos before placing your bid to ... morethoroughly inspect the lot contents and condition. Item Condition: Used- This item is untested. Return Policy: We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Listed for M.A. by G.L. Located at: Container#13 Shipping weight is 0lbs. 0oz, shipped from our warehouse in California. zip 90221) Default Shipping Service: Not Selected) California residents will be charged 9.00% sales tax. Tennessee residents will be charged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax to any shipment sent anywhere in either state. We accept the following methods of payment: For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must b
|
|
|
Karl Suss LC-3 Controller Powers On SN 93-006
Item up for sale is a: Karl Suss Model LC-3 Controller Powers On SN 93-006 Item is used and is untested other than what is indicated below: Unit(s) is used and powers on but is otherwiswe untested*Any existing cosmetic imperfections should not affect unit operation*See actual product photos for greater detail If you have any questions regarding this item please feel free to contact me and I will do my best to answer your questions 1 item as shown in picture. Picture represents the actual item. 14 Pounds in a box with packaging materials Included is only what is mentioned. No other cables. Parts, power cords, power adapters, software or any other accessories included. ============================================================================ Terms of Sale Payment Options PayPal only or contact us for payment methods to pay on pickup. Bank ... moretransfers or payments using a Cashier’s Check may be available. Contact us for additional information and fees. RETURNS Warranty for Items shipped in the US 14-Day Right to Return- Buyer has 14 days to test item to determine its operational condition unless it was listed as Parts-Only or As-Is. Should the item be received non-operational you may return the item for refund of the purchase price. 14-day period starts the day you receive the item. You cannot return an item because it is not compatible with the system you installed the item into. Please insure that the item you are purchasing is compatible with the application or in the system you intend to use it. Warranty for Items shipped outside the United States All international sales shipped to a destination outside the US are non-refundable. All international sales are final. SHIPPING Shipping within the United States Buyer is responsible for all shipping costs including returns. Please note for domestic shipments(within US) we ship FedEx ground only. But you can use UPS ground shipping rates(calculated automatically by eBay) to estimate the shipping charges. Actual FedEx ground rates may be cheaper then UPS dependin
|
|
|
Karl Suss MJB3-IR Mask Aligner with Backside and Topside Alignment Capabilities
Karl Suss MJB3-IR Mask Aligner with Backside and Topside Alignment Capabilities Inventory# 58663*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. The scanning backside alignment is accomplished using an IR camera which detects infrared light transmitted through an IR transparent chuck. As well as the substrate and mask being aligned. The alignment microscope uses 5X. 10X and 20X objective lenses for either backside or topside alignment. For topside alignment the eyepieces are 10X. The exposure source is a 350W Hg lamp powered by a Suss Model CIC 500. The system incorporates UV-400 optics to transfer the energy to the substrate. The substrate may be exposed in soft or hard contact with both forms of alignment. Also in topside alignment ... morethe vacuum contact(high precision HP) is available. Very Nice Condition. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Karl Suss 168420 Mask Aligner missing parts as-is
This Karl Suss mask aligner is used surplus. System is missing many parts. The physical condition is good. But has scratches from previous use and handling. It will be sold as-is. Model No: 168420 Missing: Most parts. All optics removed and stage is missing. Includes: Table. Bridge, light housing frame and pneumatic bank. Condition: As-is. Estimated Packed Shipping Dimensions: L x W x H = Requires Freight Shipping. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that ... morewill be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 4 Can't find the answer you're looking for? contact us! Business Hours: 8am to 5pm MST Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30am to 4pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505.345.8732, Fax: 505.345.8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 7% Sales tax applies to NEW MEXICO residents(or provide a resale tax ID for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. All items will be securely packaged or palletized and shipped via the best and most economical way possible. Shipping and handling times may vary based on the packing requirements. So please allow up to 5 business days for handling(pos
|
|
|
KARL SUSS 25004115 PROBE HEAD ARM CV METER PSM 6; Varian-EATON
PROBE HEAD ARM CV METER PSM 6; Varian-EATON Powered by
|
|
|
Karl Suss MA150 Mask Aligner with Cassette to Cassette Automatic Wafer Handling
Karl Suss MA150 Mask Aligner with Cassette to Cassette Automatic Wafer Handling. 1000w Hg lamp house with CIC1000 power supply Model: MA150 EL This mask aligner has been used as our production tool when we had high volume loading in the past and now is till being used for production from time to time. We are located in Santa Clara. CA. Onsite inspection and test run for the tool are welcome. This tool will be sold AS IS.
|
|
|
Karl Suss High Precision Inspection Microscope
Karl Suss High Precision Inspection Microscope Inventory# 59012*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Eyepiece: 10X. Objectives: 5X. 20X, 50X. Stage Size: 11 in. x 8 in. Stage Movement: 8 in. x 9 in. Brightfield. Reflected Light. Halogen Illuminator. Trinocular Head. High precision submicron Karl Suss PM8 prober base configured for substrate inspection. Not configured with prober platen. Magnetic locks fix image in place while inspection takes place. When electromagnets are released stage can be manually moved via coarse or fine adjusters. Mitutoyo long working distance microscope. CE marking. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right ... moreto return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Karl Suss FO-150 RING LIGHT AND POWER SUPPLY
Karl Suss FO-150 RING LIGHT AND POWER SUPPLY. EXCELLENT CONDITION. FREE SHIPPING. COMES AS SHOWN. 60 DAY WARRANTY.
|
|
|
Karl Suss MJB 21 Double - Side Mask Aligner
Karl Suss MJB 21 Mask Aligner Suss MJB 21 Double- Side Mask Aligner For simultaneous double- side or single side mask and subsequent exposures. Partially automated operation function program Alignment accuracy. Wafers and substrates up to 3 x 3" We accept Purchase Orders from Universities and Colleges Call us for details at 978-771-0481
|
|
|
Karl Suss RA120M Automatic Diamond Wafer Scriber
KARL SUSS- RA120M Automatic Diamond Wafer Scriber Inventory# 57170*Sold AS IS* Scribing of sensitive materials such as GaAs. Performs conventional scribing applications as well as edge scribing and interval scribing patterns. Substrates or wafer size up to 3 in. x 3 in. Precise setting and control of all scribing parameters: Scribing depth. Pressure, speed, angle and scribe position. Edge and skip scribing for opto-electronic devices such as lasers. LED and sensors. 110V. 60 Hz. AS IS items will have different return and warranty conditions. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements ... moreare made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Karl Suss MJB-3
Set up for 2' or 3: with hardware can shoot demo video, ask for miore info. Need to move from lab in August!
|
|
|
Karl Suss MA4 Mask Aligner with Front and Backside Alignment Capability
Karl Suss MA4 Mask Aligner with Front and Backside Alignment Capability Inventory# 59229*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Older system but will be sold fully tested. Splitfield alignment microscope. Exposure Optics: 350W lamp house 365nm to 400nm. Three Exposure Modes: Soft Contact. Standard Hard Contact and High Precision Vacuum Contact. Backside IR alignment option. Max. Substrate Size: 100mm round. Size depends on available chuck at time of sale, ask a salesperson for sizes available. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact ... moreus for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Karl Suss PN614PC119 Rev 04 Board
Karl Suss PN614PC119 Rev 04 Board Karl Suss PN614PC119 Rev 04 Board
|
|
|
Karl Suss Manual Micropositioner Probehead (or Micromanipulator)
Karl Suss Manual Micropositioner Probehead The device has 3 screws for fine control(xyz positioning) Sold as is. Happy bidding, sidulatikus
|
|
|
Karl Suss PM8 Probe Station, wafer test, with TempTr Chiller, controls AS SHOWN
You are bidding on a Karl Suss PM8 Probe Station as shown in Picture Gallery appears in good shape and seems to have most components used to make it functional. We bought as surplus and Comes with Temptronic TP03000 Chiller/temp controller. And accessories shown in picture gallery ONLY. Granite Table can go or not as you prefer. Normally used to limit vibration. Probe station. Temperature controlled chuck, holes for vacuum to hold the sample down | Temperature controller: up to 125°C | 2002 vintage. Category:Probers. Temptronics hot chuck. Manual probers | 6" or 8" chuck probe. These may be set up for PC boards with X,Y platen, no chuck) | On vibration isolation table | NOTE: Appears to Require CABLES. And a few vacuum hoses reconnected. NOTE: this machine came from a working environment from a major Semiconductor Mfg. Lab ... moreand has not been used for several years. Needs Calibration and we have not tested it and that is why it is listed as"not working" Sold AS- IS Karl Suss PM8 Probe Station The PM8 probe station is configured to serve as a platform for precise probehead positioning. During failure analysis. The faulty location of the device-under-test can be isolated by internal signal acquisition through an active probe. During product analysis, electrical characterization can be performed through a passive probe on the device-under-test. Please see the photos for clearer description. Condition: Not Working. TERMS: Picture Gallery Represents Full Disclosure and description of this Item Sold AS-IS. Pictures take precedence over all text description. Buyer Pays All Shipping. Add Packing/loading Charge of $20.00. FOB Richardson TX 75081. If you have any questions. Call 214-680-8328 before bidding, or waive all questions in regard bidding. Your bid signifies your full understanding of these terms and your promise to promptly pay for item within 3 days of invoice under these terms. We do not ship international unless we state that, or you ask before bidding. If international, we may add up to
|
|
|
Karl Suss M230 split field microscope
For bid is a Karl Suss M230 split field microscope with 10X eye pieces 2ea 3X turrets 5X. 10X, and 20X objectives. Like new condition.
|
|
|
Karl Suss MA150 Mask Aligner Wafer Semiconductor
For sale is a used Karl Suss MA 150 s/n 106 Type 11600012 Mask Aligner. Comes with a MA 150M EL s/n 0036 controller. Has the 2 monitors. One new in 2008. We believe the system was refurbished by a well known and respected Semiconductor machinery dealer. Has some cd's we believe to be backup operating software. Has the manual and all other items you see in the photos. We think this a complete system but have no history with this system or any like them. We are selling as is where is and as you see it in the photos. We have no idea how to set up and operate. You are welcome to come in and inspect and power up if you can. If you need more pictures please ask and we will send them to you. We will wrap and secure to pallets for shipping. Buyer pays for shipping. Thank you for looking
|
|
|
Karl Suss MJB3-IR Mask Aligner with IR Transmission Alignment
Karl Suss MJB3-IR Mask Aligner with IR Transmission Alignment for Front or Backside Alignment Inventory# 59412*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Splitfield revolver microscope with three pairs of long working distance objectives. IR transmission alignment system applicable to materials transparent to wavelengths in the range from 400 to 2000nm. The backside alignment is accomplished using an IR camera which detects infrared light transmitted through an IR transparent chuck. As well as the substrate and mask being aligned. The substrate can be exposed in soft or hard contact with both forms of alignment. Also in topside alignment the vacuum contact(high precision HP) is available. 110V. 60 Hz. Can be sold in untested ... moreas-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-149b7142804-0x104-
|
|
|
A111260 Karl Suss MJB3 Mask Aligner, Type 401001
Click to Enlarge) Product ID# A111260 This Karl Suss MJB3 Mask Aligner. Type 401001 looks to be in decent cosmetic condition with signs of wear and previous use(scratches, paint chips as shown) I could hear it power on. However I really lack the knowledge and equipment to test properly so it is being sold as-is. Features: Leitz Wetzlar microscope with Periplan GF 16X eyepieces. And Objectives H20X/0.40, NPL 5X/0.09, and 10X/0.18. Unpacked dims 30*24*18. See pictures for more details. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 110 pounds Buyer pays freight plus a fixed ... morehandling fee of 25 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Auction Terms. Upon end of auction. The winning bidder should proceed to"Check Out" and wil
|
|
|
Karl Suss Prober Dark Box Enclosure on Vibration Isolation Table
Karl Suss Prober Dark Box Enclosure on Vibration Isolation Table Inventory# 59467*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Light tight enclosure for wafer probers. Cable ports on both sides of box. Easy lift front panel. Vibration isolation table. Inside Dimensions: 38 in. L x 29 in. W x 40 in. H. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and ... moreScientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Karl Suss 2203 Optical Bridge with Vacuum Stage and B&L MicroZoom II 11500018
For sale is Karl Suss 2203 Optical Bridge with Vacuum Stage and B&L MicroZoom II 11500018. This is parts unit that was modified to work without the base. It comes with Optical Bridge Mount with B&L MicroZoom II High Performance Microscope with Lenses(30x; 50x; 20x; 1.5x) and Vacuum Stage. Crating and packaging is FREE. Shipping is about $100 within Cont. United States.
|
|
|
KARL SUSS PSM6 ANALYTICAL PROBE STATION WAFER MITUTOYO 20X 50X OBJECTIVES
770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, On these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. KARL SUSS PSM6 ANALYTICAL PROBE STATION WAFER MITUTOYO 20X 50X OBJECTIVES This auction is for ... moreone Karl Suss PSM6 Wafer Probe Station. The PSM6 is a manual wafer load probe station with X-Y movement on the chuck and microscope. This system has the following configuration: Mitutoyo WF Head, Two(2) Mitutoyo WF 10X/24 Microscope Optics, Mitutoyo 378-804-2: M Plan APO 20X NA 0.42 WD 20.0 mm, Mitutoyo 378-811-2: M Plan APO SL50 50X NA 0.42 WD 20.0 mm, PSM6 Control Box, Instructional Information found This unit is in excellent physical condition and will arrive in the condition shown. It comes with a 14 Day Guarantee against being DOA from receipt. You are bidding on only what is listed in the description and what is in the pictures. If it is not listed in the description and you don't see it in the pictures, then it is not included. Power cords and power adapters are never included unless specifically mentioned. You must agree to our terms to purchase. ATTENTION: WE HAVE BEEN IN BUSINESS SINCE 1978. FEEL FREE TO CALL US FOR ADDITIONAL INFORMATION. GOOD LUCK BIDDING. By bidding on this auction you are agreeing to these terms. These terms are not negotiable. NO order will be shipped until full payment is made INCLUDING SHIPPING. Shipping listed is for the c
|
|
|
Karl Suss MJB3 Precision High Performance Mask Alignment & Exposure System
Karl Suss MJB3 Precision High Performance Mask Alignment& Exposure System Inventory# 59510*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Easy to use manual mask aligner. System capable of exposing partial wafers or substrates up to a maximum size of 3 in. dia. Ask a salesperson about available mask and chuck sizes. Hard or soft contact and proximity modes. High precision alignment stage X.Y, Theta. High performance Olympus microscope consists of normal field microscope with objective turret for different magnifications. 365 to 400nm spectral range up to 250W. 110V. 60 Hz. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month ... moreparts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Karl Suss MJB-3 HP
Set up for 2' or 3: with hardwar e ask for more info. Need to move from lab in October.
|
|
|
Karl Suss PSM6 Analytical Probe Station untested sold as-is
This Karl Suss PSM6 analytical probe station is used untested surplus and is being sold as-is. There are some minor scratches and scuff marks to the outer housing on this unit. Otherwise the physical condition is fair. Part No: PSM6 Condition: Being sold as-is Estimated Packed Shipping Dimensions: L x W x H = Freight shipping Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister AZ7 Can't find ... morethe answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: All items will ship from UES Arizona Facility. 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 7.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will ship from UES Arizona Facility. All items will be securely packaged or palletized and shipped via the b
|
|
|
KARL SUSS PN614PC119 REV04 BOARD T10079
Call: 915-228-4841- 8am- 5pm Mountain Time KARL SUSS PN614PC119 REV04 BOARD T10079 Warranty Information: SEE ITEM DETAILS Product Description: Classification: Item(s) is sold as is. See item description for details. Physical Condition: Good(Item looks presentable and has basic usage wear) Reference Number: T10079 Estimated Shipping Weight: 4.0000 Estimated Shipping Dimensions: 5.0000 x 8.0000 x 12.0000 Greetings from the Southwest. We are TEAM International Inc, 2nd Hand Store to the Trade. TEAM is a trading company. We buy and sell just about anything. We are always up to making a deal so please feel free to inquire. Check Out Now Payment Shipping Customer Service Check-Out Now: Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available ... moreafter winning an auction or completing a Buy It Now purchase. Check-Out Later: If you desire a freight quote. Custom shipping, or any extra service we can invoice you after the purchase with your request. Please give us a call or eBay message with your request. We are open to any and all payment methods. We also take credit card payments over the phone. 915) 219-7095• Payments can also be sent to: TEAM International Inc Accounts Payable 2901 Durazno Ave El Paso TX 79905 For shipments to Texas addresses. We are required by State law to collect 8.25% Sales Tax. ATTENTION TEXAS RE-SELLERS: If you have a Texas Resale Tax Certificate we can remove the Texas Sales Tax. We ship all around the world. If you need something out SAME DAY/OVERNIGHT please give us a call to confirm- 915) 219-7095• Shipments Under 60 lbs. UPS: Our primary carrier is UPS for domestic shipments. USPS: For International shipments we use USPS DHL International: We can ship on your DHL account. Please send account number with order. Ship on your account: Have a Fed-Ex or UPS account? Send us the account number and we w ill remove the shipping charge from your order and ship: Overnight. 2 da
|
|
|
Karl Suss MA 45 Mask Aligner
KARL SUSS MA45 ALIGNER MANUAL OPERATION SPLIT FEILD OPTICS 350 WATT LAMP UP TO 4X4" SUBSTRATES or 4" WAFERS TABLE TOP SYSTEM MASK ALIGNER FOR THIN FILM AND HYBRID APPLICATIONS. WAFERS UP TO 4.5"X5" AREA. We accept Purchase Orders from Universities and Colleges Call us for details at 978-771-0481 G uaranteed to work and fully operational. Please contact us if you have any questions or additional equipment needs. We have one of the largest inventories of semiconductor manufacturing equipment for sale in the world. S erving the needs of Colleges and Universities worldwide(Have been in business since 1982) All shipping costs to return the product are the responsibility of the buyer. International Buyers must arrange shipping we'll provide weights and dimensions Packaging for international and crated shipments will be added ... moreto invoice.
|
|
|
Karl Suss UV Intensity Meter Model 1000
Karl Suss UV Intensity Meter Model 1000- no probe included in this sale, from surplus inventory Please note before buying: Item condition: Most items are Used and should be in working order. Item is for sale AS IS. Returns If you have received a non-functional item you will get your money back. If you contact me directly and not via eBay Buyer Protection in most cases you will get your money back without returning the item. If you use eBay buyer protection. You must return the item and the refund will only be issued after I receive the item. Shipping Items will be shipped with tracking number within 3 business days after receiving cleared payment from buyer. Tracking Number is sent to buyer's email via PayPal and can be seen in eBay as well. Items are shipped by Israelpost as Registered AirMail. ECO post or EMS depending on weight. Shipping ... morevia Courier for items weighing more than 20 kg. Buyer pays for courier shipping. Shipping time: Buyer usually receives item within 21 business days after shipping. Delivery times depend on Post office and Customs handling. If you have not received your item within 26 days from payment please contact me immediately by email. Don't forget that shipping time and delivery time are not the same- I ship the item within the time limit promised in my listing. Delivery is dependent on the efficiency of postal and custom services. Please remember this when you give detailed seller feedback. Taxes& Customs Israeli buyers: +18% VAT. International buyers are responsible for taxes and customs clearing. Payment methods PAYPAL preferred. Please contact me for other payment methods. Feedback If for ANY REASON you are not satisfied with your purchase please contact me immediately by email or phone. Before contacting eBay Resolution Center or Leaving Feedback. If you are SATISFIED with your purchase please leave POSITIVE FEEDBACK. You are most welcome to contact me for questions or additional photos. 11 MIC p4 mic
|
|
|
KARL SUSS NR4145 ANALYTICAL PROBE STATION WAFER MITUTOYO WF(4 HEADS) OBJECTIVES
NEVER USE STOCK PICTURES! Shipping Information Usually will ship within the next day after receipt of payment. Saturday shipping when possible. Will provide insurance for items valued over $20.00! Always glad to combine shipping International buyers please check customs charges. They are not included in shipping cost! International buyers please check shipping cost before bidding! First class can take up to 8 weeks to deliver. Only Canada can first class be tracked Payment Information We gladly accept PayPal Payment must be made within 3 business days Texas residents need to add 8.25% sales tax. PLEASE SEE PICTURES FOR DETAILS. IF IT IS NOT IN THE PICTURE, IT IS NOT INCLUDED! PLEASE ASK QUESTION BEFORE BIDDING! I WILL PROVIDE DELIVERY TO A 5OO MILE RADIUS OF DALLAS. TX. FOR FUEL COST ONLY. You are bidding on A KARL SUSS PROBE STATION WAFER ... moreLISTING BELOW IS ALL THE INFORMATION THAT IS ON THE ITEM; ALL ITEMS PICTURED IS WHAT COMES WITH THE SYSTEM. ALL CABLE. CORDS AND LINES ARE ATTACHED MITUTOYO WF WITH 4 HEADS TYPE 11500042 NR 4145 110 VOLTS VA 24 HZ 50 MITUTOYO WF WITH 4 HEADS SONY HYPER HAD CCD IRIS/RGB COLOR VIDEO CAMERA THERMO CHUCK PM8 DALLAS SEMICONDUCTOR 25498 ITEM CAME FROM A SIEMENS OPERATION IN CHICAGO. I HAVE NO WAY OF TESTING BUT IT IS NEAR MINT CONDITION. HAS BEEN USED BUT VERY CLEAN. Please look closely at the pictures Condition: EXCELLENT CONDITION. EXCEPTIONALLY CLEAN. NO DAMAGE OR MARKINGS ALL CABLES. CORD AND LINES ARE INTACT AND MINT CONDITION. WAS IN OPERATION WHEN REMOVED FROM SIEMENS CORP. IN CHICAGO. Be sure to add me to your! Always glad to combine shipping. ADDITIONAL NOTE TO BUYERS REGARDING FEEDBACK STARS. I STRIVE FOR 5-STAR SERVICE BY STATING UPFRONT MY POLICIES AND MY SHIPPING RATE. ALSO. I DESCRIBE TO THE BEST OF MY ABILITY. IF YOU WERE PLEASED WITH THIS TRANSACTION. PLEASE RESPOND WITH ALL 5 STARS! IF YOU ARE NOT PLEASED, LET ME KNOW, AND I'LL WORK TO MAKE IT THAT WAY. Questions are welcomed. Thank you for looking! ShipSaver.
|
|
|
Karl Suss RC8 MS3 Spin Coater with Cybor Power Supply and Controller
USED Karl Suss RC8 MS3 Spin Coater with Cybor Power Supply and Controller RC8 MS3 Cybor Power Supply and Controller Accepts wafers up to 8" Stainless Steel Cabinet Program for preset or specific spinning parameters Maximum Speed: 3.000 rpm Acceleration: 100 to 5000 rpm/s Anacapa Equipment strives to offer excellent customer service. Please contact us if an item you have purchased is not as expected before going through eBay’s return process. We have an excellent rating and will do all that we can to make you happy with your purchase. If we mistakenly sent the wrong item we will overnight the correct one. If the item is defective we will issue a refund immediately. We offer a money back return for any item purchased from Anacapa Equipment if it meets the following criteria: If item can't power on. Can't pass self-test or not as ... moredescribed. If we have another unit we can either exchange it or refund your money. Please indicate which you prefer. The returned item has to be in the original packaging. Carefully packaged and insured. We will process the refund as soon as item is received. Return must be initiated within 14 days of receipt. B uyer is responsible for determining the suitability of this product for their application. PAYMENT OPTIONS: We accept PayPal. Company Checks, All major credit cards, Wire Transfers. Please call(805) 961-4457 TAXES& FEES: California Sales Tax applies if order within California at 8% Handling charges apply if stated in listing. Your cost is the price of your item. Shipping charge, insurance, and sales tax if applicable. SHIPPING: Item is shipped via freight. Fully insured. You may also use your own carrier or arrange for pick up. Please call or Email to request a Freight Quote. It takes 1 business day to receive a quote. If quote is requested prior to purchase then item can be shipped in 1-2 business days from receipt of payment. If quote is requested after purchase it may take an extra day. REFUNDS& RETURNS: Items authorized for return must be returned prepaid. F
|
|
|
Karl Suss PA 200 Control Box for Semiautomatic Wafer Prober System 7U PARTS
Search our eBay Store! Karl Suss PA 200 Control Box for Semiautomatic Wafer Prober System 7U PARTS SKU: JV-LEV-C-KARLSUSSPA200 Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge Karl Suss PA 200 Control Box for Semiautomatic Wafer Prober System 7U PARTS BEING SOLD AS-IS FOR PARTS OR REPAIR. Model: PA 200 Unit's power light flickers when powered on. But the fan does not work We were unable to test the functionality of this unit Unit specifications: 110V | 400VA | 50/60Hz This unit is a PA 200 Prober for the SUSS PA200 Semi-automatic Wafer Prober System Unit is ... moremissing 260PC143-01 Platten Controller Please view images for more information Unit Dimensions(L" x W" x H" 18 1/4 x 19 x 12 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10, with 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All images taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T b
|
|
|
Karl Suss Prober Dark Box Enclosure 40 x 34 x 43″ ID
This item is used and untested. PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in description. Karl Suss Prober Dark Box Enclosure 40 x 34 x 43″ ID. Condition: AS IS for Parts or Repair Estimated Packed Shipping Weight: Will require freight shipping. Please contact us for an estimated shipping quote. Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. Sold AS-IS. No Warranty, No Returns- Does Not Qualify For 14-Day Satisfaction Guarantee Shipping Notice: Additional shipping charges may apply; pending location. Size and weight of the item(s) Lister: AD Can't find the answer ... moreyou're looking for? contact us! Business Hours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday. Email Address: Please Use The eBay Messaging Service, Phone: 408-762-7281, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be securely packaged or palletized and shipped via the best and most economical way possible.
|
|
 |