In 
 
Order by: 
Available to: 
Price: 
 - 
$
140000.00
Buy It Now
Condition: Used
Location: Morgan Hill, United States
Plasma 901e Tegal Etcher With Manual. SOLD AS SEEN IN PICTURES! Not tested. Cassette to Cassette Poly/Nitride Plasma Etcher*Easy to use menu driven control*Input ... moregases controlled by MFC. Up to 4 MFC with system*Non-friction spatula wafer transport- Power requirement: 208 VAC 25A 1 PH- S/N: CU50134- Item# CU9000-50134-Volt: 200/208 VAC- Curr. 30 Amps- Freq. 50/60 Hz- Wires: 2+ ground- Wfg: 11/1999- m eter reads: 5081-RCTN Chamber item No. CC1106-01302 NOTE: We do not know the wafer size of the unit. If you know a way to tell. Please let us know. Specifics Below are off the internet: This is only to help. We do not know if this is exactly what we have. Please ask questions. Wafer Size Capacity: 3.4,5,6 inch Cassette To Cassette In-line Single Wafer Plasma Etcher.Capability to etch vias and contacts with anisotropic or sloped profiles.For etching silicon dioxide. Silicon nitrides, and polyimides.Can handle wafers from up to 6 in. Microprocessor control.208 V, 50/60 Hz. Tegal 901e series Plasma/RIE etch System are used by the Semiconductor Industry for integrated circuit fabrication. The system are used in one part of the sequence of manufacturing steps that transfer a pattern formed from a layer of photosensitive material, the photoresist, to a layer that makes up a permanent part of the final device. The process of defining a pattern with photoresist known as photolithography, while the etch process transfers the photoresist pattern to the permanent layer.Tegal 900 Series systems deliver highly reliable, repeatable results in etching a variety of films used to manufacture semiconductor, telecommunications and optoelectronics devices, flat panel displays and thin film magnetic heads.Tegal 901e,are designed around a production-proven wafer transport design that can accommodate 75 mm to 150 mm round silicon, GaAs, InP, and dielectric material substrates. The transport can also be configured to accommodate rectangular substrates up to 125 mm on a side. Typical Applications for Tegal 901e:1. Nitr
$
3500.00
Buy It Now
$39.03 Shipping
Condition: New – Open box
Location: Morgan Hill, United States
PN TGL-39-700-007 Tegal Spare Parts.
$
275.00
Buy It Now
$34.66 Shipping
Condition: Used
Location: Morgan Hill, United States
MKS Baratron 122AA-00010DB, 10 torr, From Tegal 901e 903e Plasma Etcher ID-DV-2-10-002All are in the photos. No other staff are included.Used. not tested. ... moreWe sell it at as is, where is . No warranty.no return.Subject to prior sale.Contact us by email if you have any questions.
$
404.17
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. These products are subject to export restrictions under U.S. law. Made ... morein Japan. Model No: E281-000031-12.
$
988.00
Buy It Now
$18.00 Shipping
Condition: Used
Location: Austin, United States
This LAM Research ADIO PCB board is used, working surplus. It was removed from a LAM 4420 etcher. The physical condition is excellent!
$
950.00
Buy It Now
$34.66 Shipping
Condition: Used
Location: Morgan Hill, United States
MKS Baratron Type 625A-13127 , 10 torr From Tegal 901e 903e Plasma Etcher ID-DV-2-11-002All are in the photos. No other staff are included.Used. not tested. ... moreWe sell it at as is, where is . No warranty.no return.Subject to prior sale.Contact us by email if you have any questions.
$
504.17
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This AMAT Applied Materials 0100-09153 is used working surplus. The physical condition is good, but there are signs of previous use and handling. Removed ... morefrom a AMAT Applied Materials Precision 5000 Mark II CVD Etcher System.
$
405.17
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This McLean Engineering UES17H115S29 is used working surplus. The physical condition is good, but there are signs of previous use and handling. Removed ... morefrom a AMAT Applied Materials Precision 5000 Mark II CVD Etcher SysteM.
$
211.11
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
These Lam Research 839-011516-001 Upper Chamber Assembly Parts are used, working surplus. The physical condition is good, but there are signs of previous ... moreuse and handling. They were removed from a LAM Research Rainbow 4420 Etcher.
$
301.19
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. These products are subject to export restrictions under U.S. law. Serial ... morenumbers or country of manufacture may vary.
$
275.00
Buy It Now
$34.66 Shipping
Condition: Used
Location: Morgan Hill, United States
Used. Not tested. We sell it at as is, where is . No warranty.no return.ID-DU-3-11Photos are for all. Price is only for one piece.Subject to prior sale.Contact ... moreus by email if you have any questions.
$
204.17
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This AMAT Applied Materials 0100-09134 is used working surplus. The physical condition is great, but there are signs of previous use and handling. Removed ... morefrom a AMAT Applied Materials Precision 5000 Mark II CVD Etcher System.
$
23500.00
Buy It Now
Condition: Used
Location: Palisades Park, United States
Plasma 901e Tegal Etcher With Manual. SOLD AS SEEN IN PICTURES! Not tested. Cassette to Cassette Poly/Nitride Plasma Etcher*Easy to use menu driven control*Input ... moregases controlled by MFC. Up to 4 MFC with system*Non-friction spatula wafer transport- Power requirement: 208 VAC 25A 1 PH- S/N: CU50134- Item# CU9000-50134-Volt: 200/208 VAC- Curr. 30 Amps- Freq. 50/60 Hz- Wires: 2+ ground- Wfg: 11/1999- m eter reads: 5081-RCTN Chamber item No. CC1106-01302 NOTE: We do not know the wafer size of the unit. If you know a way to tell. Please let us know. Specifics Below are off the internet: This is only to help. We do not know if this is exactly what we have. Please ask questions. Wafer Size Capacity: 3.4,5,6 inch Cassette To Cassette In-line Single Wafer Plasma Etcher.Capability to etch vias and contacts with anisotropic or sloped profiles.For etching silicon dioxide. Silicon nitrides, and polyimides.Can handle wafers from up to 6 in. Microprocessor control.208 V, 50/60 Hz. Tegal 901e series Plasma/RIE etch System are used by the Semiconductor Industry for integrated circuit fabrication. The system are used in one part of the sequence of manufacturing steps that transfer a pattern formed from a layer of photosensitive material, the photoresist, to a layer that makes up a permanent part of the final device. The process of defining a pattern with photoresist known as photolithography, while the etch process transfers the photoresist pattern to the permanent layer.Tegal 900 Series systems deliver highly reliable, repeatable results in etching a variety of films used to manufacture semiconductor, telecommunications and optoelectronics devices, flat panel displays and thin film magnetic heads.Tegal 901e,are designed around a production-proven wafer transport design that can accommodate 75 mm to 150 mm round silicon, GaAs, InP, and dielectric material substrates. The transport can also be configured to accommodate rectangular substrates up to 125 mm on a side. Typical Applications for Tegal 901e:1. Nitr
$
25.00
Buy It Now
$35.32 Shipping
Condition: New – Open box
Location: Morgan Hill, United States
$
625.00
Buy It Now
$14.92 Shipping
Condition: Used
Location: Phoenix, United States
Manufacturer: Tegal.
$
603.12
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Lam Research heartbeat board is used, working surplus. The physical condition is good, but there are signs of previous use and handling. Removed ... morefrom Lam Research Rainbow 4420 Etcher System. Removed from Lam Research Rainbow 4420 Etcher System.
$
1002.16
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Lam Research 853-012350-002 is used working surplus. The physical condition is good, but there are signs of previous use and handling. Removed from ... morea Lam Research 4428b Rainbow Plasma Etcher System.
$
550.00
Buy It Now
$52.21 Shipping
Condition: Used
Location: Morgan Hill, United States
Wires Cables For Tegal 901e 903e Plasma Etcher Etching DQ-2-018All are in the photos.Condition: Used. Not tested.We sell it at AS IS,WHERE IS without ... morewarranty.This Item is subject to prior sale without notice.
$
149.99
Buy It Now
$18.32 Shipping
Condition: Used
Location: Milpitas, United States
We strive for excellence and appreciate the. On a scale from 1 - 10, with 10 being in new or excellent condition, this item is rated as a 7. We do not ... morehave the necessary resources to test this unit.
$
406.16
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. These products are subject to export restrictions under U.S. law.
$
215.99
Buy It Now
$17.90 Shipping
Condition: Used
Location: Milpitas, United States
We strive for excellence and appreciate the. stands to reason that issues will arise occasionally. We're eager to find an amicable solution when it does. ... moreSEE PHOTOS. All images taken in house of the unit(s) being sold, except for multiple quantities where item received will be in similar or better condition.
$
1211.15
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This AMAT Applied Materials EEP-A-024 Interface Loadlock Cover is used working surplus. The physical condition is great, but there are signs of previous ... moreuse and handling. Removed from a AMAT Applied Materials Precision 5000 Mark II CVD Etcher System.
$
71.99
Buy It Now
$18.32 Shipping
Condition: Used
Location: Milpitas, United States
We strive for excellence and appreciate the. A corner of the mounting plate is bent. On a scale from 1 - 10, with 10 being in new or excellent condition, ... morethis item is rated as a 7. opportunity to work with you in resolving any issues.
$
49.99
Buy It Now
$14.34 Shipping
Condition: Used
Location: Milpitas, United States
We strive for excellence and appreciate the. SEE PHOTOS. All images taken in house of the unit(s) being sold, except for multiple quantities where item ... morereceived will be in similar or better condition.
$
99.99
Buy It Now
$14.34 Shipping
Condition: Used
Location: Milpitas, United States
We strive for excellence and appreciate the. On a scale from 1 - 10, with 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. ... moreAll images taken in house of the unit(s) being sold, except for multiple quantities where item received will be in similar or better condition.
$
87.99
Buy It Now
$22.62 Shipping
Condition: Used
Location: Milpitas, United States
On a scale from 1 - 10, with 10 being in new or excellent condition, this item is rated as a 7. We strive for excellence and appreciate the. We do not ... morehave the necessary resources to test this unit.
$
1150.00
Buy It Now
$34.66 Shipping
Condition: Used
Location: Morgan Hill, United States
Subject to prior sale without notice.
$
3004.17
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This AMAT Applied Materials 4347 A is used working surplus. The physical condition is good, but there are signs of previous use and handling. Removed ... morefrom a AMAT Applied Materials Precision 5000 Mark II CVD Etcher System.
$
151.99
Buy It Now
$39.84 Shipping
Condition: Used
Location: Milpitas, United States
Stands to reason that issues will arise occasionally. We're eager to find an amicable solution when it does. On a scale from 1 - 10, with 10 being in ... morenew or excellent condition, this item is rated as a 7.
$
39.99
Buy It Now
$14.34 Shipping
Condition: Used
Location: Milpitas, United States
We strive for excellence and appreciate the. We do not have the necessary resources to test this unit. Scratches and scuffs are on the unit. SEE PHOTOS. ... moreAll images taken in house of the unit(s) being sold, except for multiple quantities where item received will be in similar or better condition.
$
159.99
Buy It Now
$100.99 Shipping
Condition: For parts or not working
Location: Milpitas, United States
Model: CP1037. We strive for excellence and appreciate the. stands to reason that issues will arise occasionally. We're eager to find an amicable solution ... morewhen it does. On a scale from 1 - 10, with 10 being in new or excellent condition, this item is rated as a 7.
$
2507.15
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. These products are subject to export restrictions under U.S. law.
$
200.00
Buy It Now
$35.55 Shipping
Condition: Used
Location: Austin, United States
Removed from Plasma-Therm Shuttlelock 720 Plasma Ion Etcher. These products are subject to export restrictions under U.S. law.
$
3505.18
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Model No: Lower Reaction Chamber TCP. Part No: 852-030038-601. These ... moreproducts are subject to export restrictions under U.S. law.
$
189.99
Buy It Now
$10.50 Shipping
Condition: New – Open box
Location: Mesa, United States
YOU ARE BUYING ONE LUXTRON INTERFACE 1015 TO TOK406 WITH CABLES XINIX 1200/1015 INTERFACE TO LAM ETCHER. THIS IS NEW SHELF SURPLUS NOT IN ORIGINAL PACKAGING ... moreAND IS GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MWUPGR1) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your!
$
204.17
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Shinko Electric 011BP4S-00-0B0 is used working surplus. The physical condition is good, but there are signs of previous use and handling. These products ... moreare subject to export restrictions under U.S. law.
$
806.18
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. These products are subject to export restrictions under U.S. law. Serial ... morenumbers or country of manufacture may vary.
$
79.99
Buy It Now
$14.34 Shipping
Condition: Used
Location: Milpitas, United States
Cash is only accepted for will-calls (in-person). stands to reason that issues will arise occasionally. We're eager to find an amicable solution when ... moreit does. Let us earn your loyalty! opportunity to work with you in resolving any issues.
$
37500.00
Buy It Now
Condition: Used
Location: Morgan Hill, United States
$
22.00
Buy It Now
$35.32 Shipping
Condition: New – Open box
Location: Morgan Hill, United States
PN TGL-39-683-001 Tegal Spare Parts.
$
22.00
Buy It Now
$35.32 Shipping
Condition: New – Open box
Location: Morgan Hill, United States
PN TGL-39-682-001 Tegal Spare Parts.
$
2011.15
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. Removed from an AMAT Applied Materials Precision 5000 Mark II CVD Etcher ... moreSystem. Removed from an AMAT Applied Materials Precision 5000 Mark II CVD Etcher System.
$
49.99
Buy It Now
$22.62 Shipping
Condition: Used
Location: Milpitas, United States
We strive for excellence and appreciate the. stands to reason that issues will arise occasionally. We're eager to find an amicable solution when it does. ... moreOn a scale from 1 - 10, with 10 being in new or excellent condition, this item is rated as a 7.
$
2150.00
Buy It Now
$77.86 Shipping
Condition: Seller refurbished
Location: Morgan Hill, United States
Tegal 915 RF Matching With 5623301 99-214-003RW For Plasma Barrel Etcher Asher Location: Morgan Hill,CA95037 USA. 3A1-suite 5Valid Time: Subject to prior ... moresale. This item is only for end userNo warranty no refund!!
$
750.00
Buy It Now
$34.66 Shipping
Condition: Used
Location: Morgan Hill, United States
Matrix 303 Plasma Etcher Ceramic RingUsed, not tested. We sell it at as is, where is . No warranty.no return.Subject to prior sale.ID: AWS-001Contact ... moreus by email if you have any questions.
$
704.16
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Xycom Automation Pro Face 1502-C000000000B0A Touch Screen XT 1502 is used working surplus. The physical condition of the touch screen is good and ... moreclean. It was removed from an Axcelis Fusion PS3 Etcher. Part No: 1502-C000000000B0A Model No: XT 1502 Removed from: Axcelis Fusion PS3 Etcher Made in United States Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: 36”x 24”x 18” 33 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister AZ2 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: All items will ship from UES Arizona Facility. 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will ship from UE
$
803.13
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Part No: 200mm Wafer Cassette Loader. The physical condition is good, with light signs of use. These products are subject to export restrictions under ... moreU.S. law. Set of 2 (Left & Right).
$
3500.00
Buy It Now
Condition: Used
Location: Hollister, United States
Tegal CC1326-00600 Chamber Stripper CR1324-00400 MTCH NTWK Source Strip Tegal 6550 Etcher. This Tegal CC1326-00600 Chamber Stripper CR1324-00400 MTCH ... moreNTWK Source Strip Assembly, was removed from a Tegal 6550 Etcher system in working condition.
$
795.00
Buy It Now
$34.66 Shipping
Condition: Used
Location: Morgan Hill, United States
99-126-006 F PCB For Tegal 901e Tegal 903e Plasma Etcher Etching DS-4-17-002Condition: Used. Not tested.We sell it at AS IS,WHERE IS without warranty.This ... moreItem is subject to prior sale without notice.
$
2804.17
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This AMAT Applied Materials 0040-61814 is used working surplus. The physical condition is good, but there are signs of previous use and handling. Removed ... morefrom a AMAT Applied Materials 200mm Centura RTP Etcher System.
$
1505.12
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
This Jobin Yvon Monochromator H-10VIS is used working surplus. The unit includes fiber optic cable. Part No: H-10 VIS. Serial numbers or country of manufacture ... moremay vary. These products are subject to export restrictions under U.S. law.
$
85.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Temple, United States
INTERNATIONAL RECTIFIER, IRKD91-04. 90 AMP, 400 VOLT DIODE.
$
2000.00
Buy It Now
Free Shipping
Condition: Used
Location: Hollister, United States
Also, the hard drives have been removed from the unit. It shows signs of handling, such as, minor scuffing and scratching to the exterior of the unit. ... moreOtherwise, the physical condition of the unit is good and clean.
$
255.17
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
Model No: DPA SYSTEM DISTRIBUTION BD. This AMAT Applied Materials 0100-35180 is used working surplus. The physical condition is good, but there are signs ... moreof previous use and handling. Removed from a AMAT Applied Materials Precision 5000 Mark II CVD Etcher System.
$
2750.00
Buy It Now
$85.68 Shipping
Condition: Used
Location: Morgan Hill, United States
Subject to prior sale without notice.
$
311.11
Buy It Now
Free Shipping
Condition: Used
Location: Albuquerque, United States
The physical condition is good, but there are signs of previous use and handling. It was removed from a Lam Research Rainbow 4420 Etcher. System/Tool: ... moreLam Research Rainbow 4420 Etcher. Removed from an 860-010135-003 Vacuum and Facilities Installation.
$
1750.00
Buy It Now
$34.66 Shipping
Condition: Used
Location: Morgan Hill, United States
The price is for one piece.ID-D-DV-3-12Condition: Used. Not tested.We sell it at AS IS,WHERE IS without warranty, return.Check our website for our main ... moreproducts: plasma asher equipment, plasma etcher equipment, ICP, RIE, Bosh Process equipment, DRIE, PECVD, ALD thin film equipment, rapid thermal processing equipment, high vacuum evaporator equipment, sputtering equipment , wafer probe, HP4062 tester, metrology. Appreciate your time.This Item is subject to prior sale without notice.
$
650.00
Buy It Now
$34.66 Shipping
Condition: Used
Location: Morgan Hill, United States
All are in the photos. No other staff are included.Used. not tested. We sell it at as is, where is . No warranty.no return.Subject to prior sale.Contact ... moreus by email if you have any questions.
$
650.00
Buy It Now
$34.66 Shipping
Condition: Used
Location: Morgan Hill, United States
127AA-00010B All are in the photos. No other staff are included.Used. not tested. We sell it at as is, where is . No warranty.no return.Subject to prior ... moresale.Contact us by email if you have any questions.
$
650.00
Buy It Now
$34.66 Shipping
Condition: Used
Location: Morgan Hill, United States
127AA-00010B-SPHPAll are in the photos. No other staff are included.Used. not tested. We sell it at as is, where is . No warranty.no return.Subject to ... moreprior sale.Contact us by email if you have any questions.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
 In 

Former Listings  
 
TEGAL PLASMA 903e Plasma Etcher with ENI ACG-10B RF Generator
PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in description. TEGAL PLASMA 903e Plasma Etcher with ENI ACG-10B RF Generator Monitor& Keyboard Condition: USED. PULLED FROM A WORKING ENVIRONMENT Estimated Packed Shipping Weight: Unit will ship by freight or is available for local pickup. Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Shipping Notice: Additional shipping charges may apply; pending location. Size and weight of the item(s) Lister: DL Can't find the answer you're looking for? contact us! Business ... moreHours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday. Email Address: Please Use The eBay Messaging Service, Phone: 408-762-7286, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be securely packaged or palletized and shipped via the best and most economical way possible. We typically ship within 1 business day however. Und
MARKING METHODS MARK 300 ETCHING MACHINE ETCHER
MARKING METHODS MARK 300 ETCHING MACHINE ETCHER This is a used unit and it is in good shape. Unit was successfully tested for power only. Cosmetically this unit looks fine. But we do not have the capabilities to fully test. Unit might show signs of previous use. Scratching, rust and normal signs of age. Anything else is included with this unit besides what is shown in the listing photos. PLEASE READ THE DESCRIPTION AND SEE PHOTOGRAPHS OF THIS UNIT CAREFULLY AND THOROUGHLY FOR CLARIFICATION OF CONDITION BEFORE MAKING ANY PURCHASE. W E HAVE DESCRIBED THIS ITEM TO BEST OF OUR KNOWLEDGE INCLUDING ALL KNOWN AND VISIBLE FLAWS. This unit is being sold AS-IS with no exchanges/returns. If you have any questions or concerns about this unit. Please feel free to contact us. PAYMENT Paypal is the only Method of payment we accept No Exceptions! SHIPPING ... moreAll items are shipped via UPS or USPS Items are usually shipped the same day or the next business day All international orders are shipped via USPS Priority Mail or Express Mail We do not ship on Saturdays or Sunday C4
1925 Etienne Drian Japanese Parasol Print Dry Point Art of the Etcher
About Us Return Policy Shipping Payment PrintsNPaper 1925 Etienne Drian Japanese Parasol Print Dry Point Art of the Etcher ITEM SPECIFICS AS FOLLOWS: Age- 1925 Classification- Antique Condition- Excellent Number of Pages- 1 Number of Images- 1 Page Size- 10.25x15 in” Frameable Image Size- 8.75x13.75 in” Description This is an original 1925 print carefully extracted from a Antique out-of-print magazine or publication. It measures approximately: 10.25x15 in” overall and is in Excellent condition. We offer only originals. Never a reprint or reproduction. May have some rough edges or staple marks on edges where separated from binding but these are easily trimmed or matted out for display. 1925 print titled: THE ART OF THE ETCHER: A DRIAN DRY-POINT. Subtitle: A Fine Example of the Work of a Famous French Artist: THE JAPANESE PARASOL" Our"PrintsNPaper" ... morewatermark © is. Only on the digital image for photo protection purposes, and is not on the print itself. The Condition Grade for this ad is: Excellent For an explanation of how our Classification and Condition Grading Works visit our GUIDE PAGE. We believe that your money should be invested in the collectible you are purchasing not in extras that should come as a matter of good service. We provide Free of Charge the following items that many other dealers charge extra for. COA- CERTIFICATE OF AUTHENTICITY A certificate of authenticity is included free of charge that identifies the issue source. Date and title, and certifies, by PrintsNPaper, that the item is both authentic& original. PREMIUM SHIPPING MATERIALS We package all our items according to size in Heavy Duty Mailing Tubes with end caps doubly secured with strapping tape. These are used by most in the Fine art and photo industry. Each item is placed in an archival see-thru sleeve or sheet protector with an acid-free black insert of heavyweight material. We want to see your pr
Feather Etcher Fletching Feather Wood Burner Traditional Archery
Vintage feather burner. I plugged it in it gets red hot. Looks kind of primitive. probably came from some old Indian village. Just kidding. Thanks for looking.
CONTROL LASER SIGNATURE LASER ETCHER
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice for the equipment. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA only call us number is below. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we accept Paypal. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. Items ... moreare being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 02151260002 Manufacturer: CONTROL LASER Description: CONTROL LASER SIGNATURE LASER ETCHER Capacity: Model Number: SIGNATURE Serial Number: 231630231 Additional Information: EXCEL CONTROL. CONTAINS 2 PIECES BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JASON LOCKETT 20001 EUCLID AVE EUCLID. OH 44117 216-906-4002 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBay listing
OLD WHALING FLEET ETCHING by JOHN W. WINKLER, MASTER ETCHER
Old Whaling Fleet" creation date 1919 edition size of 36. By the artist that is just being released by the family of John W. Winkler, Master Etcher" We are the"official site" for John W. Winkler etchings direct from the Winkler family. The etchings of the"East San Francisco Bay" are between the south edge of Oakland and the north edge of Alameda extends the branch of San Francisco Bay. Now straightened and walled and deepened, and now called Oakland Inner Harbor. Formerly it was called the San Antonio Creek and also Alameda Slough or Alameda Estuary as Winkler knew it. Part was quite wide between the marshlands at high tide. A backwater neglected and of little value, edged by farms and industries. It served as a graveyard for vessels that were permanently or temporarily abandoned. Some of these were used as dwellings ... moreby people who could not or would not pay for conventional housing. This mixture with the personality it had taken on appealed to Winkler and from it he had made 30 or more etchings between 1915 and 1921 and one dated 1928, including rejects and etchings that are similar to others in this group. Of other areas of the east side of San Francisco Bay there is only one etchings identified. The size of this etching is 6 7/8" x 4 7/8" Please keep in mind that some of these etchings are on 200 year old paper and will never discolor or fade. Bid with confidence. Thanks for stopping by! Items will be shipped in tubes unless otherwise noted. These are all"lifetime impressions" There are NO re-strikes in the Winkler collection. Visit our website at: www.johnwinkleretcher.com for more etchings direct from the Winkler estate. Inquire about international shipping.
EMBANKMENT ON THE THAMES ETCHING by JOHN W. WINKLER, MASTER ETCHER
Embankment on the Thames" last available copy) creation date 1927 edition size of 26. From the grouping called"London" by the artist that is just being released by the family of John W. Winkler, Master Etcher" We are the"official site" for John W. Winkler etchings direct from the Winkler family. Winkler traveled to London from 1925- 1928 to pursue new subject matter. He made etchings and drawings mostly along the Thames River. He was known as"The Man Who Drew on Brass. The A and B designations on a print title indicate the first plate done. Sometimes plates of a similar scene were found later and printed so sub-letters are used. A little information on Mr. Winkler: John W. Winkler(1890-1979) was born in Vienna and. With the aid of his mother and grandmother, left for the United States in 1910 on a forged ... morepassport, never thereafter to reveal his birth name. Reaching San Francisco by 1912, he stumbled upon the entryway of the San Francisco Institute of Art and enrolled on impulse to learn"cartooning" and thereby make a million dollars. But about three weeks into the course he discovered fine art and never looked back. By 1918 he had become a master pure-line etcher and by 1920 had earned the title"artist laureate of San Francisco. Bertha Jacques in Chicago would later compare him to Rembrandt. And John Taylor Arms referred to him in 1934 as"Master of Line" and in 1940 as"Master of us all. Winkler's prints can be found in most major museums with the following museums having the most complete collections: The Achenbach Foundation. San Francisco; The Art Institute of Chicago; The Boston Public Library; the Library of Congress; the New York Public Library; The Smithsonian Institution; the Massachusetts Institute of Technology Museum; The Oakland Museum; The San Diego Museum; and the Brooklyn Museum. The size of this etching is 7 7/16" x 11 5/16" Please keep in mind that some of these etchings are on 200 year old paper and will never discolor
Ideal Model 11-081C Etcher/Engraver (CTAM# 7213)
Ideal Model 11-081C Etcher/Engraver
Antique Machine RED HEAD Demag and Etcher Printz Electric Detroit - NICE !!!
Antique RED HEAD DEMAGNETIZER and Etcher Printz Electric Co. Detroit 120V- NICE! Great Patina. Cables are worn. Unit Powers ON and hums. Etcher functions. Demagnetizer not tested. For Questions or Expedited Shipping Please Contact SCIO Industrial LLC at +1 734 644 1793 Mon-Fri 08:00-17:00 US EDT. International Buyers Please Contact Us For a Shipping Quote Prior To Purchase. US Federal Export Law Applies. About Us: We are an Asset Solutions Company Proudly Serving South East Michigan. We offer MRO and Premium Quality Industrial Surplus Consignment Services. We also Purchase and Sell Surplus Industrial Assets from Single Machines to Complete Facilities. Turn Your Idle or Surplus Assets Into Cash Quickly and Painlessly. For More Information Please Contact SCIO Industrial LLC at +1 734 644 1793 Mon-Fri 08:00-17:00 US EDT. BUYER AGREES TO THE ... moreFOLLOWING TERMS AS A CONDITION OF SALE. THE ITEM SOLD IS BEING SOLD ON AN“AS IS– WHERE IS” BASIS. WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SELLER SHALL NOT BE LIABLE FOR LOSS OF REVENUES OR PROFITS. INCONVENIENCE, EXPENSE FOR SUBSTITUTE PROPERTY OR SERVICE. STORAGE CHARGES, LOSS OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE OR MISUSE OF. OR INABILITY TO USE THE ITEM SOLD. IN NO EVENT SHALL SELLER’S LIABILITY EXCEED THE AMOUNT BUYER PAID TO SELLER TO PURCHASE THE ITEM SOLD. BUYER ASSUMES ALL RISK AND LIABILITY FOR LOSS. DAMAGE OR INJURY TO BUYER AND BUYER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF USE OR MISUSE OF. OR INABILITY TO USE THE ITEM SOLD. BUYER HAS COMMERCIAL EXPERIENCE WITH THE CLASS/TYPE OF ITEM LISTED OR FAMILIARITY WITH THE ITEM IN PARTICULAR. AND ITS TYPICAL AND INTENDED USES. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14be8c1dbd2-0xf3-
Atotech Chemcut Etcher Equipment Manual & Program Listing Sigma Series SG5-10-24
Atotech Chemcut Etcher Equipment Manual& Program Listing Sigma Series SG5-10-24 TWO NOTEBOOKS: EQUIPMENT MANUAL AND PROGRAM LISTING ALSO CONTAINS INSTRUCTION/PROCESS MANUAL FOR BULK COLLECTION SEPARATOR NOTE: THIS ITEM IS IN GOOD CONDITION. AS IS. SORRY, NO RETURNS. NOTE: IF YOU ARE INTERNATIONAL WITH AN INTEREST IN THIS ITEM, PLEASE CONTACT FOR SHIPPING ARRANGEMENTS THANKS FOR LOOKING!
AMAT P5000 MXP+ Oxide Etcher.
6"wafer size. Maker: AMAT. Model: P5000. Vintage: 1997. S/N: 7358. Config. 2x MXP+ Oxide Etch chamber( ESC Simple Cathode) 1x Orient chamber. Storage: 8 slot Elevator. Slit Valve: ZA Slit Valve. Turbo pump: Ebara ET300WS. EPD: Monochrometer type. Gate Valve and Throttle Valve. MFC: Unit/ CF4.N2,O2,CHF3,AR. Chiller: Nealab HX150.
Technics Plasma GmbH model 100-E Plasma System Etcher Cleaner
PRICED TO SELL@ $3.450.00& FREE CONTINENTAL USA Shipping Included! Please see the pictures of the actual Ebay Item. IT! Everything& Only what you see is what you will get. Be sure to add me to your! Check out my! 1369 Daviess Street Lockport.IL. 60441 Call Patrick Lind at 815-838-0134. RELIABLE COMPUTER SERVICES. Inc. 30 Years of Buying& Selling computer hardware by DEC or"Digital Equipment Corporation" Since 1985. RCS Inc. has been buying& selling computer hardware by DEC or Digital Equipment Corporation for 30 Years. Buying whole machines/sights& selling the peripherals& parts to Maintenance companies& even back to DEC. When it comes to purchasing or selling computer hardware by DEC. Call the company that delivers what they promise at the fairest market price. We will also be selling many non DEC related ... moreitems here on Ebay. We will be attending many auctions.Liquidations,surplus& bankruptcies sales here in Chicago& the Midwest area. We will be selling a wide variety of items. From printers& plotters to floor scrubbers& Oscilloscope. Tools, Antique's,Computer hardware, Copiers, motors, generators, Radios, Test& Scientific Equipment. Payment is due within 10 days of auction closing. Unless we are on vacation. Most orders ship within 1 to 3 days of receipt of a guaranteed payment. We are located in LOCKPORT IL. About 35 miles SW of Chicago IL. Most items can be inspected in our warehouse before bidding. Please call 1st& make an appointment. We are not there or available everyday. Buyers can also email or call us with any test procedures they would like us to try for them on the equipment. Send us your day time phone# we will call you while we try your procedures.Thanks Send payment to: Reliable Computer Services. Inc. 1369 Daviess Street Lockport. IL. 60441 Phone# 815-838-0134 Search words: Technics Plasma GmbH model 100-E Plasma System Etcher Cleaner.
Martindale No.1 Standard etcher and demagnetizer;110V;60 Hz; INV=16296
For parts or repair!Untested as it needs new cord& leads! No guarantee it will work!