In 
 
Order by: 
Available to: 
Price: 
 - 
$
34,500
Buy It Now
$0 Shipping
Condition: Used
Location: Milpitas,CA,USA
$
3,450
Buy It Now
Free Shipping
Condition: Used
Location: Goldendale,WA,USA
Here is a Seren R601(Branded"TERA Technology" Radio Frequency Power Supply. This RF Generator has been tested to Full power of 600W and is fully ... morefunctional. Unit is shown running at 100. 300, and 600W set points. Unit can be run from the front panel, Analog interface, or RS-232 serial interface. This listing is for the generator only. No cables or accessories are included. Unit has 2 selectable RF outputs for situations where one generator can run cathodes(or other loads) in different chambers or processes. The default is the top output. Unit also has all other standard R601 features such as: Ramp. Pulse, Low and High power modes, Forward or load power regulation, master or slave operation, DC bias control, and universal line input voltage. Unit can be used anywhere that up to 600W of RF power at 13.56 MHz is needed. Unit must be used an appropriate RF Match Network to run non 50ohm loads. Model: R601 Software Version: 11.3M00 Manufactured: 1/26/2007 P/N 9600610026 Input: 90-125VAC or 190-264VAC single phase. 47-63Hz, 15A Max Current Output: 600W@ 13.56MHz Via N-Type coax connector. 2 selectable RF Outputs Cooling: Air Cooled Tested. Guaranteed Fully Functional International Bidders. Email for a shipping quote, if quoted shipping is too high like ae advanced energy amat lam eni metroline
$
8,999.99
Buy It Now
$200 Shipping
Condition: Used
Location: Sparks,NV,USA
$
39,000
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Tempe,AZ,USA
$
2,460
Buy It Now
$0 Shipping
Condition: Used
Location: Korea, South
$
3,800
Buy It Now
$257 Shipping
Condition: Used
Location: Korea, South
Here is a Seren R601(Branded"TERA Technology" Radio Frequency Power Supply. This RF Generator has been tested to Full power of 600W and is fully ... morefunctional. Unit is shown running at 100. 300, and 600W set points. Unit can be run from the front panel, Analog interface, or RS-232 serial interface. This listing is for the generator only. No cables or accessories are included. Unit has 2 selectable RF outputs for situations where one generator can run cathodes(or other loads) in different chambers or processes. The default is the top output. Unit also has all other standard R601 features such as: Ramp. Pulse, Low and High power modes, Forward or load power regulation, master or slave operation, DC bias control, and universal line input voltage. Unit can be used anywhere that up to 600W of RF power at 13.56 MHz is needed. Unit must be used an appropriate RF Match Network to run non 50ohm loads. Model: R601 Software Version: 11.3M00 Manufactured: 1/26/2007 P/N 9600610026 Input: 90-125VAC or 190-264VAC single phase. 47-63Hz, 15A Max Current Output: 600W@ 13.56MHz Via N-Type coax connector. 2 selectable RF Outputs Cooling: Air Cooled Tested. Guaranteed Fully Functional International Bidders. Email for a shipping quote, if quoted shipping is too high like ae advanced energy amat lam eni metroline
$
900
Buy It Now
Free Shipping
Condition: Used
Location: Korea, South
$
4,499.95
Buy It Now
Free Shipping
Condition: Used
Location: Loris,SC,USA
$
2,900
Buy It Now
$790 Shipping
Condition: Used
Location: Korea, South
$
4,699
Buy It Now
Free Shipping
Condition: Used
Location: San Diego,CA,USA
$
2,500
Buy It Now
$0 Shipping
Condition: New
Location: Milpitas,CA,USA
$
1,000
Buy It Now
$200 Shipping
Condition: Used
Location: Germany
$
2,300
Buy It Now
Free Shipping
Condition: Used
Location: Grand Prairie,TX,USA
$
1,490
Buy It Now
$0 Shipping
Condition: Used
Location: Korea, South
$
4,000
Buy It Now
$450 Shipping
Condition: Used
Location: Korea, South
$
5,500
Buy It Now
$170 Shipping
Condition: Used
Location: Korea, South
$
3,998
Buy It Now
$0 Shipping
Condition: Used
Location: Korea, South
$
14,500
Buy It Now
$0 Shipping
Condition: Used
Location: Temple,TX,USA
$
9,999.99
Buy It Now
$200 Shipping
Condition: Used
Location: Blaine,WA,USA
$
98,000
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Morgan Hill,CA,USA
$
5,000
Buy It Now
$0 Shipping
Condition: Used
Location: Korea, South
$
4,300
Buy It Now
$400 Shipping
Condition: Used
Location: Korea, South
$
25,900
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Tempe,AZ,USA
$
1,100
Buy It Now
Free Shipping
Condition: Used
Location: Korea, South
$
3,808.13
Buy It Now
$0 Shipping
Condition: Used
Location: Albuquerque,NM,USA
$
4,599
Buy It Now
Free Shipping
Condition: Used
Location: Singapore
$
20,000
Buy It Now
$450 Shipping
Condition: New
Location: Korea, South
ASTRON AX7685 Remote Plasma Source TYPE AX7685- REACTIVE GAS GENERATOR The MKS ASTRON®ex reactive gas generator is our highest output. Self-contained ... morereactive species source for chamber cleaning and other reactive gas applications. Relative to other plasma generating technologies. The ASTRONex reactive gas generator is more efficient. Has lower cost of ownership and is capable of producing high flows from NF3. C3F8, CF4, and other gases. The design architecture integrates the power source, control module. And plasma chamber into a single compact module. Due to its simple interface. The ASTRONex reactive gas generator is easily integrated onto both new and existing production tools. Specifications and Ordering Information Gas Supply 100% Ar required for ignition only Up to 6 slm of NF3(after plasma ignition NF3 can be added and the Ar removed) Contact MKS for alternate gas capability. Operating Pressure 1 to 4 Torr during ignition measured at ASTRON outlet 1 to 10 Torr post ignition measured at ASTRON outlet once flow is stabilized Reactant Output 95% dissociation up to 6 slm NF3 at 5 Torr(0.5 slm to 6.0 slm typical) Wetted Materials 6061-T6 Aluminum hardcoat anodized 6061-T6 Aluminum. Chemraz®, Alumina Control Interface 9 and 25 pin D connectors. Opto-isolated I/O Inputs On/Off Outputs Ready AC line Plasma On Utilities Power 187 to 228 VAC. 50/60 Hz, 60A, 3 phase Cooling water 2.0 gpm. Ambient 40°C max. Physical 4 lb. 33.5 kg) 16.7"L x 14.5"W x 10.1"H(424 x 368 x 26 mm nominal Compliance S2-0200 CE. NRTL, F47 CONDITION: NEW PRODUCT AND WORKINHG CONDITON. NO WARRANTY. Delivery This tool located in Korea and will be shipped payment on delivery by FedEx international service. Customer should inform us FedEx account No. before shipping. About Us Our company SYSTA has been established in 2002 and provides the superior engineering service and the services regarding used equipment and parts. Our network and excellent engineer are all ready to provide customers with the speedy. Reliable and
$
7,500
Buy It Now
$395 Shipping
Condition: New
Location: Korea, South
$
4,000
Buy It Now
$450 Shipping
Condition: Used
Location: Korea, South
Search our eBay Store! Adtec AX-2000EUII-N 2000W RF Plasma Generator 13.56MHz SKU: HS-TER-B-AX2000W Condition: Used Packaging: Pallet/Skid Warranty: 30-Day ... moreDOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Adtec AX-2000EUII-N 2kW/2000W RF Plasma Generator 13.56MHz(KEY IS INCLUDED) BEFORE PURCHASING PLEASE NOTE: WE HAVE MULTIPLE QUANTITY IN STOCK. THE UNIT RECEIVED MAY HAVE A SLIGHTLY DIFFERENT“MAINS SUPPLY INPUT” IT IS EITHER( 3-PHASE/208VAC/50-60HZ/3.8KVA) or(3-PHASE/200VAC/50-60Hz) Model: AX-2000EUII-N RF Power Output: 2000W 13.56MHz. Mains Supply: 3-PHASE/208VAC/50-60HZ/3.8KVA or 3-PHASE/200VAC/50-60Hz. Physical Condition: Good/Excellent; Front rack ear is slightly bent due to handling. PULLED FROM WORKING ENVIRONMENT We do not have the necessary resources in our facility to test this unit. Key is included. Power supply and cable are not included. Dimensions(L"W"H" 24* 19* 9. Please visit the following link for product information(For Informational Purposes Only) Manufacturer’s Description(For Informational Purposes Only) Model: AX-2000EUII-N RF Power Output: 0-2000W(1W increments. R=50ohm load) Output Frequency: 13.56MHz. Output Impedance: 50-Ohm. Output Connector: HN-Type Connector. Control Method: Output power control by CPU. Temperature Range: 10°C-40°C. Remote Terminal: Analog remote control connector(amphenol 24-Pin) RS-232C remote control connector(D-Sub 25-Pin) Cooling Method: Forced Air(capacity: 11m³/min) Output Method: Continuous output power. Mains Supply: 3-PHASE/208VAC/50-60HZ/3.8KVA or 3-PHASE/200VAC/50-60Hz. PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and
$
9,998
Buy It Now
$0 Shipping
Condition: Used
Location: Korea, South
$
14,500
Buy It Now
$0 Shipping
Condition: Used
Location: Temple,TX,USA
$
17,900
Buy It Now
$830 Shipping
Condition: New – Open box
Location: Korea, South
$
20,000
Buy It Now
$500 Shipping
Condition: Used
Location: Korea, South
$
7,500
Buy It Now
$0 Shipping
Condition: Used
Location: Milpitas,CA,USA
$
5,000
Buy It Now
$350 Shipping
Condition: Seller refurbished
Location: Korea, South
$
3,000
Buy It Now
$550 Shipping
Condition: Used
Location: Korea, South
$
1,600
Buy It Now
$0 Shipping
Condition: Used
Location: Korea, South
$
2,000
Buy It Now
$500 Shipping
Condition: Used
Location: Korea, South
$
7,000
Buy It Now
$999 Shipping
Condition: New – Open box
Location: Germany
$
1,299.99
Buy It Now
$529.29 Shipping
Condition: Used
Location: China
$
2,525.01
Buy It Now
$0 Shipping
Condition: Used
Location: Albuquerque,NM,USA
$
6,655
Buy It Now
$0 Shipping
Condition: New
Location: Tempe,AZ,USA
$
2,500
Buy It Now
$0 Shipping
Condition: New
Location: Milpitas,CA,USA
$
3,420
Buy It Now
$0 Shipping
Condition: Used
Location: Korea, South
$
22,499.99
Buy It Now
Free Shipping
Condition: Used
Location: Phoenix,AZ,USA
$
6,119.1
Buy It Now
$0 Shipping
Condition: Used
Location: Korea, South
$
5,000
Buy It Now
$3,000 Shipping
Condition: Used
Location: Korea, South
$
7,600
Buy It Now
$680 Shipping
Condition: Used
Location: Korea, South
$
2,000
Buy It Now
$200 Shipping
Condition: Used
Location: Japan
$
3,500
Buy It Now
$291 Shipping
Condition: Used
Location: Korea, South
$
1,000
Buy It Now
$0 Shipping
Condition: New
Location: Milpitas,CA,USA
$
3,500
Buy It Now
$291 Shipping
Condition: Used
Location: Korea, South
$
5,000
Buy It Now
$1,500 Shipping
Condition: Used
Location: Korea, South
$
4,050
Buy It Now
$0 Shipping
Condition: Used
Location: Loves Park,IL,USA
$
7,500
Buy It Now
$0 Shipping
Condition: Used
Location: Milpitas,CA,USA
$
4,500
Buy It Now
$400 Shipping
Condition: Used
Location: Korea, South
$
693
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Paul,MN,USA
$
3,011.11
Buy It Now
$0 Shipping
Condition: Used
Location: Albuquerque,NM,USA
$
1,950
Buy It Now
$350 Shipping
Condition: Used
Location: Israel
$
7,500
Buy It Now
$0 Shipping
Condition: Seller refurbished
Location: Palisades Park,NJ,USA
Feel free to contact us for additional information through ebay mail. Or directly at: nrscientific@gmail.com or at(201) 592-1864. ENI DCG-100 DC Plasma ... moreGenerators Series DCG2D- A031100021I 500v& 800v models Model: DCG2D-A031100021I S/N: 1198& 3277(two 500 v models) S/N: 1401(800v model) 200-208v/ 50-60 Hz/ 40 A per phase/ 3-Ph. Output: 2@ 5 Kw These generators will ship in excellent operational condition. And several of the 500v models were scheduled for calibration within approx imately the past year. We have seven(7) 500v models and six(6) 800v models available for prompt delivery. Normal 0 For your reference. The seller is N&R Scientific Co. Inc. We have been providing the highest quality refurbished and fully guaranteed equipment worldwide for many years. You can purchase with complete confidence that the equipment will be provided in excellent cosmetic and perfect operational condition. Our facility is located in the metropolitan NYC area. Normal 0 Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Kindly contact us regarding suitable payment arrangements.
1 2 3 4 5 6
 In 

Past Items  
 
Ebay Shop Best4industrie AD-TEC AX-4000III-40M- 4kW 40MHz RF Plasma Generator with AMV-4000-40M-EH2 The item is in a top condition. This article has barely operating hours(1000-2000h) thus the article is almost mint condition. This is an article in a top condition. Our products are all in a function brave hardly used condition with a few hours of operation. If you have further questions, please write us or call us, then please contact our team Best4industrie all questions. Shipment Shipment with DHL Germany- international 99.00€ Payment methods• Transfer, Industrial-Sale We deal with the buying and selling of industrial products for years. Our products all come from current and functional lines. Since customer satisfaction is most important for us. We have set up a hotline 24 hours for you. under +49(0) 173/7283291 You can contact us at any ... moretime. Template Design: Industrial-Sale © Vector Abstract Earth by
YOU ARE BUYING ONE ENI DCG-200 DC PLASMA GENERATOR 20KW SLAVE UNIT. THIS UNIT WAS REMOVED FROM SERVICE AT A SHUT DOWN PRISM SOLAR TECHNOLOGIES FACILITY IN HIGHLAND. NY. THIS GENERATOR IS GUARANTEED NOT D.O.A. CHECK OUT OUR STORE FOR A DCG-200 MASTER UNIT 20KW. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156, OR HIT ASK THE SELLER A QUESTION. NY) Estimated Retail Price: $7.900.00*PICTURE IS FOR REPRESENTATION ONLY AND THIS AUCTION INCLUDES ONLY 1 GENERATOR. International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and ... moreInternational government regulations prohibit such behavior. Check out my other items! Be sure to add me to your favorites list!
ENI Power Systems Solid State RF High Power Generator OEM-6M-11781 FREE PICK UP See actual picture Please see actual picture KL5-3. Condition: Used Please Note the following: 1. 14 day DOA Warranty. 2. If you have any questions regarding this item. Please contact me_before_ bidding. Expedited shipping can be arranged upon request. Other Notes of Interest S&H: Multiple items purchased will be considered for discounted shipping. Shipments: All items will ship within 1-2 days of payment receipt.
Descriptions and Feature Item Up For Sale Is A ADTEC AD-TEC AXR-2000III 2kW 13.56MHz RF PLASMA Generator 27-300878-00 Condition: Used Remove out from working systems. The buyer will receive exactly the same unit in the pictures. The serial number is shown in the pictures. Warranty 2 days after the buyer receives it. Buyer pays return shipping. The item must be in original condition including intact void stickers. All related materials, and original packaging. Shipping If the buyer chooses USPS for shipping. We may use UPS to ship the item at our discretion Shipping within the 48 Contiguous United States only If you need international shipping. Please contact before you bid Paypal Confirmed Addresses Only= NO PO BOX Tracking number will be provided to your Paypal account right after shipping label is created In ter nat ional Shipping License: ... moreBecause the value of these item is more than $2500. We need to apply for a license from the US goverment to export it. Please allow us several days for us to receive the license. International Shipments: We welcome International buyers. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up. Do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behav ior. International Shipping Limitations: There are weight and size limitations on international shipments. For items over 60 LBS the buyer will have to arrange for shipping on their shippers account. End-User Statement may be required before shipping. Some items may have US export restrictions and cannot be shipped to all countries. We will not ship any item to the country. Person,
This ENI DC21M-Z141300110A is used surplus. It was tested in our facility and is not working. Unit glitches and the lights flicker on power up. The physical condition is fair and there are signs of previous use and handling. This item is being sold As-Is. Part No: DC21M-Z141300110A Model No: DCG-200Z AMAT No: 0190-07959 Rev. G AC Input: 3Ø. 50/60Hz, 23A, 380-480V Output: 10kW CE Marked Sold As-Is Condition: Tested Not Working. Sold As-Is Estimated Packed Shipping Dimensions: L x W x H = 36"x24"x14" 70 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included ... moreor available for sale. For multiple listed items. The pictured serial number, date or country of manufacture is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 11 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in AR
This is a transformer for making ozone. It was made by PLASMA TECHNICS. INC. in Racine Wi. It is cat. no. SP142A. Input is 120 volts. Output is 10KV at 25 ma. It is 250 VA. The base dimension, not including the mounting bracket or electrical connectors, is 3-3/4 inches by 4-1/2 inches by 6 inches tall. We purchased this transformer from a company that had made ozone generators for swimming pools. The generator was mounted in a cabinet that was not completed. We believe it was never used. The unit is not tested but we will guarantee that it is in good working condition. Buyer to pay shipping on 15 pounds. Please email questions. We combine purchases for savings on shipping.
Search our eBay Store! Trazar 1200W 27MHz Paralax Igniter RF Generator 27 MHZ for ICP Plasma Source SKU: JV-DYL-C-TRAZ1200W Condition: Used Packaging: OEM Warranty: 30 day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge New Page 1 Trazar 1200W 27MHz Paralax Igniter RF Generator Model: 1200W Physical Condition: Good. Several scratches in casing. Missing several screws from top panel, however the panel sits flush and does not move. Unit powers on. First red light on the left comes on. We do not have the necessary facilities to test this unit further. Power cable is not included. Dimensions(L"W"H" 13 x 13 x 5.5 All parts. ... moreIncluding accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. Our Contact: SVC ASSET MANAGEMENT. INC. 1096 PECTEN CT MILPITAS. CA 95035 Open Monday through Friday 10AM-6PM PST(California) 1(877)757-3863 If you're dissatisfied with your purchase. Please contact us before leaving feedback or opening a case. Let us save you time& aggravation by showing you the true
This AD-Tec AX-10000W-AKT is used working surplus. It was tested in our facility and is fully functional. The physical condition is good. But there are signs of previous use and handling. Part No: AX-10000W-AKT RF Power Output: 10.000W, 13.56MHz Made in Japan Condition: Tested Working. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 48"x28"x48" 920 lbs. Requires Freight Shipping Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number, date or country of manufacture is ... morenot necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 14 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shi
Drytek/ Lam 384T AE Generator Interface P/N 2801100 Rev.1. Assy# 2801101 Used on Drytek/ Lam Etcher It will ship Fedx ground. So please provide a phone# Shipping price quoted is for lower 48 states US customers only. We'll ship Worldwide. But customer pays shipping. Available for inspection. Logan Technologies. LP 254-773-4070
Plasma-Therm RF Generator Type HFS 3000D UP FOR AUCTION IS A PLASMA-THERM RF GENERATOR TYPE HFS 3000D. THE UNIT COMES FROM A WORKING ENVIRONMENT. BUT WE ARE UNABLE TO PERFORM TESTING HERE AT NEXTSTEP. THIS GENERATOR HAS A FEW VERY MINOR SCUFF MARKS, BUT OVERALL APPEARS TO BE IN VERY GOOD CONDITION. FREIGHT SHIPPING MAY BE AVAILABLE. Satisfaction guaranteed! If you are not completely satisfied. You may return the item within 14 days of purchase for a full refund. Questions welcome. Items are usually shipped USPS by the next business day after payment is received. We often ship within one business hour of payment. Our eBay hours are Monday to Friday 10-6 Pacific. International customers. Please ask about shipping options before bidding. As part of our mission to reduce waste. 100% of packing materials are reused(except Priority Mail flat rate ... moreboxes) All items will be properly packed, but your foam packing peanuts may not match. If you are not happy with the item you've purchased. We will work to resolve the situation to your satisfaction. Please give us a chance to fix a problem before leaving feedback. Thank you for supporting NextStep Recycling!
Abex(UK) RF Microwave Consulting Sales RFPP RF20S 13.56MHz 2kW RF Power Amplifier/ Source Condition Code"3000" See key below) This unit is a 2kW integrated RF power source for plasma generation. Internal or external RF source(CEX IN/OUT) In good cosmetic condition and fully working. Removed from an operational coating system. These units are very heavy(approx 60kg) and the front panel is rather too thin. Some cosmetic damage to the rack"ears" is almost unavoidable, as seen here. 415V UK/Eurpoean input specification. Best Offer? Our margins are affected by your payment and shipping choices. To avoid unnecessary disappointment we strongly advise that you make contact by phone or email to discuss the available options prior to submitting your offer. VAT: Compare like with like. Our prices include VAT at 20% A VAT invoice ... morewill be provided upon request. If you are a VAT registered business. You will be able to relaim the VAT. Take this into consideration when comparing prices with other eBay sellers who may not be VAT registered. Cash on Collection* In accordance with eBay and Paypal policy. We reserve the right to decline Paypal where items are collected in person. Offered as seen and described. Without warranty. Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution version) Ac
Bought from thegb4000.com in 2012. Have all the receipts. Manuals, dvds and etc. The M.O.P.A amplifier and plasma tube are an older version of the one displayed on the website. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-147064fd474-0x10f-
RF Plasma Products RF5S RF Generator(13.56MHz/500W) RF Plasma Products RF5S RF Generator This RF Plasma Products RF5S RF Generator(13.56MHz/500W) is powers up. No other testing performed, is in good physical condition and is being sold on an AS IS basis. Handling Charge: 19.95(included in shipping above) ESSSURPLUS is proud to have our 16.000+ repeat customer feedback for you to review. Thank you for looking. And Good Luck if you're bidding! Important: Auction winners have 7 days to complete the purchase of item(s) won. Feel free to contact our office for assistance in the completion of your transaction if you are having difficulty. The auction item will be relisted or sold after the 7 day window. Thank you for your assistance. Please Note: We DO NOT ship outside of the United States. However, Non-US buyers may have or find a US shipping ... moreaddress. Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground I will ship to: United States[Weight] 45 lbs. Shipping and Handling: Electronic Surplus Services a pretty image. with Vendio Research. Vendio provides powerful selling automation for sellers of all sizes. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
Here is a Used and Tested. Seren R301 MK2 R F Generator. This air cooled 300W generator can regulate in Forward or Load Power Regulation. Along with DC Bias and P ulsing controls. Note: T he plastic display cover touches the glass display and appears as seen in the last photo when viewed from different angles. But is not seen at normal viewing angles. As seen in the rest of the pictures. Software Rev: 11.3M03 Model: R301MKII P/N: 9600730025 Input: 90-140VAC or 190-264VAC single phase Output: 300W@ 13.56MHz via N Type coax Tested. Guaranteed Fully Functional International Buyers. Email for a Shipping Quote like ae eni comdel
2672 ENI DC PLASMA GENERATOR RPG-50A Please refer to the photos for a clearer description of the item. Please note that we are selling items which have been previously owned and used. We are unable to fully evaluate this item. And hence are offering it on a“AS IT IS" basis. You may request us to powerup the equipment and we can tell you the result BUT we are in no position to guarantee or warranty the products in any means. As some of the items being offered on sale has multiple stocks in inventory, thus the stated serial number in the picture description may vary. In the case where an item is stated to be in good condition, we refer to it to being in good condition in relation to its age, and we would like to emphasize that in no way do we claim that it is a new item. If the item is brand new, it would be clearly indicated by the keyword"NEW" ... morein the item description. The detailed photos as provided serves as a good guide for one to evaluate the condition of the actual item. Although sometimes we may display more than one similar item in the same picture, unless otherwise stated, we sell our items on per unit basis. We guarantee that absolutely no re-touching of the images has been done. We will readily answer any questions/queries with regards to any items on offer, and will provide additional information/photos at your request. For more similar products that we offer on internet, you can go to our web page bearing the store name ie J316gallery.com(in the near future) Shipping cost: Local pickup in Singapore could be arranged for FREE depending on the availability of consol to the place of delivery. For delivery to other destinations in the world, please kindly contact us for a quotation of the shipping cost. For other technical query, you can contact us via Ebay or pohyh@yahoo.com.sg. Delivery time: Unit will be packed and will be ready for shipment 1- 3 days after receipt of payment. Shipping note: Combined shipping is welcomed to reduce the total shipping cost. Powered by The free listing tool.
Model. Part Number. Rev. DCG-200Z Optima. OPT-100Z-08141. 001. RF Output 10kW/ 800V Max AC Input 480V/ 3 Phase Here is a MKS DC plasma generator for sputtering processes. These were installed on GE's primestar solar panel manufacturing line that was never actually produced a panel. These supplies test ran the line for a couple months and then were put in warehouse storage for a couple years. They are in excellent functional and cosmetic shape as shown. All are guaranteed in perfect functional shape with a 60 day right of return. Further Information on this Product can be found here. Location; Pallet Racking 14-7ListB Shipping Costs We do not look to make money on shipping charges. We only try to cover actual postage and shipping costs. If you feel a shipping quote is too high. Please contact us as we may very well be able to do better. ... moreThe Ebay calculator is simply one estimate and can be off at times. Turnaround Time About 95% of our orders ship within one business day and if you let us know that there is rush. We can almost always ship the same day. Freight items usually have a 2 day turn around time. Next Day Shipping We can offer next day shipping on just about all our products even if its not shown as an option on the shipping calculator. Please contact us for next day shipping options. We usually can get products out the same day even if paid for as late as 5:00 PM MST. Will You Reduce an Items Value on the Commerical Invoice to Reduce Customs Fees No. Unfortunately, we cannot reduce an items value on an invoice or shipping document. We understand paying customs fees is no fun(we have to pay them often as well) but lying about customs fees is against federal law and Ebay policy and the fines are severe. Can You Ship on My Account/Local Pickup Yes. We can ship on a customer's UPS and FedEx account. Local pickups are also accepted weekdays from 10-5 PM and by appointment. Packaging We take packaging very seriously and use only the best void fill and cushioning products. We have a foam in place system.
ENI DCG-100 DC Plasma Generator Magnetron Sputtering Power Supply. 10KW 208V In good operating condition(just tested on our 7K dummy load. But guaranteed to 10k) Sold with 14 day money back return privilege if the item is not as described or there is shipping damage This return privilege only valid for sales within the continental USA.
ENI Genesis Model GHW-12A-13DF2NO-001 RF Plasma Generator 1250 Watt 13.56 Mhz sn 179. Rev J, Software 179 Input 3-PH 200-208 15A 50-60Hz In good operating condition. Sold with 14 Day money back return privilege inaccurate description or shipping damage Return privilege only valid for sales within the continental USA. 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-14760037deb-0x11a-
RF PLASMA GENERATOR ENI DCG2S-A122000020 MASTER DCG1R-A021200021 SLAVE DC PLASMA GENERATOR 208V 3P 4W+G 45A UNTESTED 1 USED SOLD AS IS WE USE USPS. UPS AND FED-EX. MOST ITEMS WILL BE PROCESSED WITHIN 3 BUSINESS DAYS. FREIGHT ITEMS WILL SHIP WITHIN 4 DAYS. WE ALSO DO LOCAL PICK-UPS. BUYER PAYS FOR SHIPPING COST ON RETURNED ITEMS. WE ACCEPT PAYPAL. WIRE TRANSFERS AND CHECKS. MAKE CHECKS PAYABLE TO JESSICA CANDELARIA. SEND CHECKS TO 377 SPOSITO CIR. SAN JOSE, CA 95136. PAYMENT IS EXPECTED WITHIN 7 DAYS FROM THE END OF AUCTION. PAYPAL PAYM ENT: ORDERS SHIPPED TO CONFIRMED ADDRESS. FEEDBACK: CUSTOMER SATISFACTION AND FEEDBACK ARE VERY IMPORTAN T TO US. QUESTIONS: CONTACT J OHN AT(408)649-6814(408) 770-6562. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-14760037e0c-0x105-
ENI HF-300 HF300 POWER SUPPLY ENI HF-300 HF300 POWER SUPPLY 300 WATT PLASMA GENERATOR EXCELLENT $1780 THIS CAME FROM A WORKING ENVIRONMENT. THIS IS IN EXCELLENT CONDITION! ENI HF-300 ENI HF300 300 Watt Plasma Generator The power may be varied continuously from 0- 400 watts with a max. output of 300watts into 50ohms impedance. See more at: http:www.testequipmentconnection.com/896/ENI_HF-300.php#sthash.YVzFY1pR.dpuf The ENI HF-300 is a 300 Watt RF Amplifier covering the HF frequency range. It is internally a high power push-pull amplifier with a built in 13.56MHz signal source. As a power generator this would be used for plasma applications. With the addition of an RF input connector. This unit would make a very nice bench-top RF amplifier Yaba1957 is an asset recovery wholesaler specializing in new and used surplus industrial equipment. We ... moreare not a representative of any manufacturer listed; all names. Logos, descriptions and other related information are trademarks of their respected companies or manufacturers. All items listed are identified as either new or used and the new may be older surplus. We list all items to the best of our ability and aim to provide the customer with as much information as possible. Yaba1957 is not liable for any products sold. The customer is responsible for proper testing, installation and use of equipment purchased. No warranties are expressed or implied.The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Domestic Shipping. We ship using UPS and FedEx to provide en-route package tracking. International Shipping We ship using UPS. FedEx and USPS. Items shipped by UPS and FedEx are more efficient and provide customers with en-route tracking. Items shipped by USPS cannot be tracked. Intern
Really cool plasma ball lightning generator. Great science demonstration or great for you science lab decor. Works great. Has a slider to increase intensity. Touch the glass and spark will jump to finger, harmless. Runs on 12 volt DC, comes with adapter but can be run off batteries or plug into car. How cool would that be? 4.5" wide and 8 inches high, 2 lbs. Puts out ozone so can be used as an ionizer to clean odors or smoke smell. Great science device.
MKS RPG Series. Model RPDG-50Z, 5kW Pulsed DC Plasma Generator, PRICED TO SELL! Priced to sell. MSRP $10.000+. Manufacturer's Specs: Pulsed DC Generator 5 kilowatt High Frequency Asymmetric Bipolar Pulsed DC Power for Plasma Applications RPDG-50 is a 5.000W Asymmetric Bipolar Pulsed DC generator that enables deposition of a wide variety of low defect films including Al 2 O 3. BST, PZT, Ta 2 O 5. TaN, TiN, ITO, SiO 2. ZnO and SiN. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-147da0f3b93-0x10f-
Abex(UK) RF Microwave Consulting Sales ENI EGR800B RF/LF Power Amplifier Generator Condition Code"7000" See key below) Please read the following information. Before asking any questions. Please read it again. And before bidding/buying or making an offer, please read it one more time. Thank you, Abex(UK) The ENI EGR800B is an LF plasma power source operating at between approximately 10KHz and 105KHz. Internally similar to the power amplifiers of similar frequency range with the addition of a tunable frequency source. Great for ultrasonic applications. Powers up. Fan comes on. Overload switch will not latch"on" Not tested further. Please note there is no mains cable attached- internal screw terminals are used to connect the 115V ac supply. With the addition of an RF input connector. This unit would make a very nice bench-top ... moreRF amplifier. In excellent cosmetic condition, clean inside and out. For spares or easy repair. VAT: Our eBay prices include VAT at 20% A VAT invoice will be provided upon request. If you are a VAT registered business. You will be able to relaim the VAT. Take this into consideration when comparing prices with sellers who are not VAT registered. Best Offer? Our margins are affected by your payment and shipping choices. To avoid disappointment we would strongly advise that you make contact by telephone or email to discuss the available options prior to submitting your Best Offer. Abex(UK) does not currently offer shipping for items in our eBay shop. You may collect(or arrange collection) only. You will be given the opportunity to inspect and test the item at the time of collection. And may cancel the purchase at this time. Once the item has been removed from our premises, you will be deemed to have accepted it. In accordance with eBay and Paypal policies. We will not accept Paypal where items are collected. Offered as seen and described. Without warranty. Actual item) Click on image to view a high resolution version) Actual item) Click on image to view a high resolution versio
This is a used and to the last of my knowledge a working Ozone generator. It came out of a working spa. Please take a look at the plug before considering bidding on this item. Thanks!
THIS SYSTEM CAME FROM A COLLEGE CAMPUS. IT WAS IN WORKING CONDITION WHEN REMOVED. WE ARE UNABLE TO TEST THIS TYPE OF EQUIPMENT SO IT IS BEING SOLD AS-IS. THIS ITEM WILL SHIP BY FREIGHT AT BUYERS EXPENSE. FOR A QUOTE PLEASE CONTACT WAYNE AT FREIGHTQUOTE.COM- 1-800-323-5441 EXT.6348. BEFORE CALLING PLEASE HAVE YOUR DELIVERY ADDRESS READY AS WELL AS THE DIMENSIONS AND WEIGHT OF THIS ITEM. SHOWN BELOW. DIMS: 40X48X76. WEIGHT: 400LBS.
Auto Matching Network AMN-100. Matching Controller& Plasma Generator YSE-06F, YOUNGSIN Condition:In good working condition. Item Contents: What is shown. Please see the pictures for details This auction only comes with what is pictured below. Accessories. Cables, software etc. are not included unless pictured. Please make sure your shipping address& PHONE# is correct. Shipment After payment has been cleared. We ship the item in 1~2 business days Normally delivery takes 3~5 business days if you need an insurance for the item please inform us with buying the item. And it will be charged an additional fee. Customs& Duties We are not responsible for any applicable customs charge. Taxes& duties.
Here is a Seren R601(Branded"TERA Technology" Radio Frequency Power Supply. This RF Generator has been tested to Full power of 600W and is fully functional. Unit is shown running at 100. 300, and 600W set points. Unit can be run from the front panel, Analog interface, or RS-232 serial interface. This listing is for the generator only. No cables or accessories are included. Unit has 2 selectable RF outputs for situations where one generator can run cathodes(or other loads) in different chambers or processes. The default is the top output. Unit also has all other standard R601 features such as: Ramp. Pulse, Low and High power modes, Forward or load power regulation, master or slave operation, DC bias control, and universal line input voltage. Unit can be used anywhere that up to 600W of RF power at 13.56 MHz is needed. Unit must be ... moreused an appropriate RF Match Network to run non 50ohm loads. Model: R601 Software Version: 11.3M00 Manufactured: 1/26/2007 P/N 9600610026 Input: 90-125VAC or 190-264VAC single phase. 47-63Hz, 15A Max Current Output: 600W@ 13.56MHz Via N-Type coax connector. 2 selectable RF Outputs Cooling: Air Cooled Tested. Guaranteed Fully Functional International Bidders. Email for a shipping quote, if quoted shipping is too high like ae advanced energy amat lam eni metroline
Dionex Gas Plasma Systems RF Generator/ Power Supply for Series 2000 4CX1500B(PM119) Dionex Gas Plasma Systems PM119 RF Generator/ Power Supply for Series 2000 4CX1500B Unit powers on and the internal fan spins. We are unable to test further PM119-500 Watt generator Unit contains a single Eimac CPI 4CX1500B/ 8660 tetrode. 1500 Watt plate dissapation If you have any questions please contact us prior to bidding. Phone: 805) 648-3300, Normal business hours are 8am- 5pm PST Monday through Friday, Recycled Goods is located at: 3820 N. Ventura Avenue. Ventura, CA 93001, PID 48234
AE ADVANCED ENERGY PDP 2500 PULSED PLASMA RF GENERATOR Used. Shipping within US continent(lower 48 states only)
DTEC RF Plasma Generator AX-4000III-40M HF Generator/ 4kW. 40MHz/ Profibus Interface Location: Germany Details: Model AX-4000III-40M Output power 4kW Output settable range 0~4000W at 50Ω Output deviation ±1% of Set Value or 8W(whichever is larger) at 25℃ Output frequency 40.68MHz Frequency stability ±0.01% 10℃- 40℃) Output impedance 50Ω ± 2Ω Output harmonic distortion Less than-40dB of fundamental wave Remote control connection Analog/ Profibus standard Output connector 7/16-type Receptacle Cooling method Forced Air Power supply 3Ф.4wire 50~60Hz, 400V(±10% 11kVA Protection features Reflected power level+time/ Reflected power limit/ Current value+time/ Current limit/ Amp temperature/ Reflected power control Dimensions W 430 × D 670 × H 266 mm(excluding protruding parts) Weight about 65kg
MKS DCG Optima OPT-400Z. 40kW DC Plasma Generator, Master with 20kW Slave Unit. Priced to sell. Combined MSRP $10.000+. Manufacturer's Specs: ® OPT-400. 40KW DC PLASMA GENERATOR zoom Today's advanced sputtering processes require speed. Control, accuracy, improved reliability and sophisticated arc management. Building on the production-proven DCG series, the Optima® is the next generation of MKS high performance DC Plasma power supply systems for Physical Vapor Deposition(PVD) processes. The design is compact and scalable with 40kW enabled by linking a 20kW Slave to a 20kW Master. Process reliability and performance are provided by a variety of output regulation modes. User-adjustable settings and control options. MKS Optima® DC generators meet the demanding power requirements for a variety of thin film applications ... moreincluding; semiconductor. Data storage, solar cell and industrial coatings. DSP-Based Control, ±0.1% Linearity and Accuracy, 3U Rack Height per 20kW unit, Forced Air Cooling, Interface Flexibility, Multiple Run Modes, Enabling Higher Yields, Flexible Operation,
ADVANCED ENERGY PE-5000 PLASMA POWER RF GENERATOR TESTED WORKING USED 30 DAY WARRANTY CALL IF ANY QUESTIONS(408) 661-5819 g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-1491c98db3b-0x116-
i000000. ITEM TITLE Advanced Energy PE-1000 AC Plasma Power Source RF Generator RETAIL VALUE: $3281.00 Item Condition: Used- Needs New Cord! SKU: MS-105 Location: Generator power portable watt gas powered new electric rv camping start hp champion inverter emergency gasoline PRODUCT DESCRIPTION Advanced Energy PE-1000 AC Plasma Power Source RF Generator Payment Info, Domestic Shipping, World Ship, Returns/ WTY, Contact Us, Privacy, Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within two days. We accept: PayPal. All Major Credit Cards and business checks. Your order may be subject to being held until payment or funds being held are released. An 8.25% Sales Tax applies to all purchases in TEXAS, All items will be securely packaged and/or palletized and shipped via the best and most economical ... moreway possible. Shipping and handling times may vary based on the packing requirements. So please allow up to 5 business days for handling time(possibly longer for very heavy and extremely large freight items. All tracking information is forwarded to the email address associated with your PayPal or eBay account. A contact name. Current phone number and company name are required for all shipments. Certain items cannot ship to Postal Boxes. All shipped items will include a tracking number and delivery insurance for the goods purchase price. All international shipments will be shipped via FedEx. DHL or UPS. We do not ship internationally with USPS. Collect package shipments; please provide us with your FEDEX. DHL or UPS shipping account number. If buyer would like to handle the shipping arrangements. You can provide us with your FEDEX or UPS shipping information and account number or arrange pick up and/or own BOL for pick up. Local Pick up is accepted. Warehouse shipping doors open 9am- 5pm CST Monday thru Friday. A contact name. Current phone number and company name are required for all shipments. We cannot ship to Postal Boxes. Due to the sensitivity of the e
Dionex Gas Plasma Systems PM119 RF Generator/ Power Supply for Series 2000 4CX1500B. Unit powers on and the internal fan spins. We are unable to test further PM119-500 Watt generator Unit contains a single Eimac CPI 4CX1500B/ 8660 tetrode. 1500 Watt plate dissapation SKU 48234
IPC Branson Dionex Etcher Reactor Center with RF Generator and Sequencer Unit Asher Plasma Branson International Plasma Corporation IPC a SmithKline Company Reactor Center PM-21020 Dionex Gas Plasma Systems PM112-1500 Watt Generator Dionex Gas Plasma Systems PM906U-4 Integrated Programmer Module POWER RATING.1500 watts continuous input REACTOR.2 ea 10" dia. x 20" long OPERATING PRESSURE RANGE.0.1- 10 torr VACUUM SEALS.Silicone O rings and bell jar gasket REACTOR WINDOW.Hinged and spring loaded. With latch for open position PRESSURE TRANSDUCER.Thermocouple type IMPEDANCE CONTROL.Matches from 10-1500 watts to present input impedance of 50 ohms at RF power input connector. Automatic impedance matching once preset. Controls FLOW. 3- ON/OFF FLOWMETERS. 3- Range 0-900cc/min. RF POWER CONTROL.3- ON/OFF WATTMETER.0-1000W Forward. 0-300W ... moreRef. VACUUM METER.0-20 Torr range 906U Operating Controls PURGE GAS. Switch VACUUM. Switch MODE SWITCH. Automatic or Manual control. Switch selective CYCLE. Push button to advance system logic to next state START. Push button to activate automatic sequence RESET. Push button to purge chamber. Reset auto sequence at end of cycle TIMER. 0-99.9 min digital timer This auction comes with two quartz chambers. A number of spare parts, o-rings, quartz glass parts. Items are believed to be accurately described but are sold as is and we are not experts on this equipment. This auction includes a 1500 watt RF generator.
Power supply came off of working machine. Good condition. Selling as-is.
This auction is for(1) Used Unit. With no problems. Works perfectly. We used it for 1 year and my girlfriend's cancer was cured. I cannot say the machine was responsible, or the lifestyle changes that were made, but the machine was used successfully, and it remains in perfect working condition. These units are $2600 new. This is a tremendous savings, if you are looking for one of these. Introducing an extraordinary new. Fully-Programmable RF plasma energy research instrument A major breakthrough in frequency technology. The BCX 211 controller and BCX 411 RF(radio frequency) noble gas tube module is built with the ultimate standards for the professional scientific research community and independent home researcher. This is NOT just another off-the-shelf frequency generator but is an entirely NEW solid-state instrument. The BCX 211 is the ... moreresult of many years of intensive laboratory research and testing which truly brings frequency instruments into the 21st century with unequaled precision and performance. Hundreds of scientists and researchers have validated the effectiveness the BCX series. You can participate and share in the same brilliant technology. The future is here. BCX 211- 411 Features and Capabilities: In a major advance over other frequency devices. The BCX 211 has: Two modules: the BCX 211 can stand alone as a footplate/ hand electrode system. Or the BCX 211 module can be connected to the BCX 411 module for a greatly enhanced RF(radio frequency) broadcast that is deeply penetrating and very rich in frequency harmonics. The BCX 411 module is fully programmable from the 211. Qualified for official UL listing 544 Patient Connected for researchers* Standard stainless steel hand cylinders and foot plates and also sticky pad electrodes* 60 volt output. Peak-to-peak, without using a transformer(BCX 211 unit) Innovative circuitry to produce a very rapid rise-time for harmonic-rich impulses* Memorizes your favorite frequency sequences so you can automatically run them anytime* Infinite push-bu
Resonant Light Technology RB300 Rife Plasma Frequency Generator. Excellent condition. Machine is fully functional. Gas tube lights right up. This is the original Rife machine designed by Don Tunney. Comes with all the manuals and as a bonus. The 3rd edition of the Electroherbalism Frequency Lists. According to the techs at Resonant Light this machine is more powerful than their 2nd gen machine the PERL-M just not packaged as pretty. This gas tube is more directional than the gas tube of the PERL-M. I am the original owner of the machine and have taken good care of it. You can find a video of this being turned on and running at youtu.be/MgnAtyz0CRM. Just paste link in your address bar. Shipping insurance and signature receipt included at no additional cost.
CS300-15D2364 Tube Inside. SKU 44780
ERBE APC-TRAILER(ARGON PLASMA COAGULATION) CART APPLICATIONS- ELECTROSURGICAL GENERATOR ARGON PLASMA COAGULATOR/ COAGULATION UNIT AND POSSIBLY MORE- PLEASE DO YOUR OWN RESEARCH TO SEE IF IT FITS YOUR NEEDS AND APPLICATION APPROX 35" H X 16" X 16" CART APPEARS TO BE IN GREAT CONDITION- DUE TO THE SIZE AND SHIPPING COSTS I AM SELLING THIS CART AS-IS. IF THE CART NEEDS ADDITIONAL PARTS. REPAIR OR DOES NOT FIT YOUR APPLICATION IT IS SOLEY THE BUYERS RESPONSIBILITY. RETURNS- I WILL ONLY ACCEPT RETURNS IF THE BUYER PAYS RETURN SHIPPING AND IT'S WITHIN 14 DAYS OF RECEIVING THE ITEM. UNDER NO CIRCUMSTANCES WILL I DISCOUNT THE PRICE ANY FURTHER AFTER THE ITEM IS RECEIVED. PLEASE BE SURE TO LOOK AT ALL THE PICTURES AND ASK ANY QUESTIONS BEFORE COMMITTING TO BUY. PICKUPS ARE WELCOME! THE ITEM IS IN THE AUSTIN. TX AREA. 1.5 HOURS FROM ... moreSAN ANTONIO, 2 HOURS FROM DALLAS, AND 3 HOURS FROM HOUSTON.
ENI OEM 12B3-02 1250 WATT RF GENERATOR S/N 2969 AMAT 0190-76028 UNABLE TO TEST. BEING SOLD"AS IS" MISSING RF INTERLOCK COVER. QUOTED SHIPPING PRICE IS FOR LOWER 48 US STATES ONLY. LOGAN TECHNOLOGIES. LP, 254-773-4070
This listing if for a lightwind ICP plasma source with alumina process tube on KF40 flanges. And an ENI 300w 13.56 mhz rf generator. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-14b4c101617-0x114-
Descriptions. MAKER: ENI MODEL: DCG-200Z P/N: DCG-200ZHC-S02 SOFTWARE VERSION: 6.4 WEIGHT: 28.1 Kg. 61.9 lbs AC INPUT: 3PE~440-480V OUTPUT: 20KW Condition: As-Is Payments. Payment can be made with paypal. Our PayPal Account NO: judy@systa.kr Shipments We'll be able to shipment by worldwide. We will ship your order within 2-3 business days. It will usually take 5~7 business days after shipment If you have account of company. We can send by your account. FedEx. UPS, EMS, DHL etc. Contact Point 9 am to 5: 30 Pm UTC+9 monday to Friday( Closed on Weekends and public holidays) About Us Our company SYSTA has been established in 2002 and provides the superior engineering service and the services regarding used equipment and parts. Our network and excellent engineer are all ready to provide customers with the speedy. Reliable and qualified engineering ... moreservices. CVD&Etch System Refurbish(AMAT. Novellus, WJ etc. High Performance Cleaning System(remote plasma cleaning) Parts Sourcing(Generator. Pump, Heater etc. Contact us SYSTA Co. Ltd. 569-2 Oesammi-dong. Osan-si, Gyeonggi-do, Korea( 447-230) T) 82-31-377-7520(F) 82-31-377-7521(Mail) sales@systa.kr(Web) www.systa.kr
2010 Peak Surgical Pulsar Generator PS100-100 PlasmaBlade Monopolar ElectroSurgical RF System FREE US SHIPPING! ~Scroll Down for Additonal Pictures~ This 2010 Peak Surgical PlasmaBlade console just came of service and has biomed tag that was good through March 2014. It is in excellent cosmetic and power tested working condition. Powers on. Passes self test and appears ready to use. I guarantee it will not be DOA. I believe the new retail on a current model is $39,990 from the manufacturer. Comes with Peak Surgical and power cord. There is a footswich port on the back but I believe it will work without the footswitch. Once powered on the screen displays Coag& Cut with up/down control buttons for each function. Uses single patient use plasma blade kits. I see there are several blade kits currently being offered on ebay. Specifics- Peak ... moreSurgical Pulsar Generator Plasma Blade Monopolar RF ElectroSurgical System Model: PS100-100 Serial No: 10P00925 110-240 VAC- 50/60 Hz- 400 Watts Duty Cycle: Int. 40s/ 80s Output Power Monopolar: 30W/40 Ohms/4 MHz. 120W/600 Ohms/460 KHz, Int 10s/30s Hospitial Grade Cord/Plug Date of Manufacturer: 2010 Manufactured in Netherlands Manufacturer's Description- Based on innovative proprietary technology. The PEAK Surgery System is a new tissue dissection system that represents an important advance in radiofrequency(RF) surgical technologies. It consists of the PEAK PlasmaBlade disposable cutting devices and the PULSAR Generator. PEAK PlasmaBlade devices offer the precision of a scalpel and the bleeding control of traditional electrosurgery without the extensive collateral tissue damage.The PULSAR Generator supplies pulsed plasma RF energy to the PEAK PlasmaBlade devices with an intuitive interface that is easy to use. Benefits of the PEAK PlasmaBlade System Compared to scalpel and traditional electrosurgery. Demonstrated improved operating efficiency 4. Compared to scalpel. Reduces blood loss during skin incision 1. Compared to traditional electrosurgery. Reduced thermal injury de
This ADTEC AX-3000III RF Plasma Generator is used surplus. It was tested in our facility and is not working. The physical condition is good. But there are signs of previous use and handling. This item is being sold as-is. Part No: AX-3000III AMAT Part No: 0190-38493 RF Power Output: 3000W. 13.56MHz Mains Supply: AC200-220V. 3Ø, 6.0kVA, 50/60Hz CE Marked Made in Japan Condition: Tested Not Working. Sold As-Is Estimated Packed Shipping Dimensions: L x W x H = 32"x24"x16" 95 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. ... moreFor multiple listed items. The pictured serial number, date or country of manufacture is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 11 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 7.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax appli
MKS ENI OEM-25A RF Power Supply/ Plasma Generator 2500 W@ 13.56 MHz Comes with a manual and what you see in the pictures. If you don't see it. You probably wont get it. Specifications are from ENI and may vary slightly due to upgrades. Options, or revisions this unit may or may not have. This unit has been tested by Retronix and is guaranteed to work for 30-days. Parts and labor, excluding freight. Description: The ENI Power Systems Model OEM-25A Power Generator is an all solid state. Water cooled, power source expressly designed for use in gas plasma and sputtering applications. Completely self-contained, the OEM-25A provides all of the control and monitoring functions needed in a state-of-the-art power generator. It will provide a maximum of 2500 W into a 50 Ω impedance. The reliable operation of any solid state power generator is directly ... moreinfluenced by the sophistication of its power control circuitry. The OEM-25A automatic power control module measures forward RF power. Reflected RF power, and the current draw of each RF power amplifier module. Should any of these parameters exceed a preset limit, the automatic power control will immediately fold back its RF output power so that the components always remain within their safe operating limits. Besides assuring safe operation of the OEM-25A, the automatic power control module will provide constant RF power output level to within 3% of the matched power setting regardless of the plasma load VSWR. In addition, the automatic power control eliminates power output drift due to line voltage variations, component aging and reduces output hum and ripple to insignificant levels. An external DC voltage or pulse fed into the rear panel connector will permit the power output of the OEM-25A to be accurately controlled by a computer program that includes end point detection information. The OEM-25A is provided with an input/output connector(interface bus) that provides access to all control and metering functions. These functions include: Unit AC Power- ON/OFF RF Power
Basic Information Brand: MKS ASTEX Products Model: Astronex MKS P/N: FI80131 Cust P/N: 0920-00131 SALE TERMS AND CONDITIONS: Condition: Used. Repaired PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days so payment arrangements can be made. We accept: PayPal. Or Bank Wire Transfers in USD(There is a $25 wire transfer fee) WARRANTY: No warranty. RETURNS: Unless stated in listing or agreed upon by both parties prior to order placement. Items are sold As-Is. No returns. INTERNATIONAL BUYERS: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying AND IF ... moreTHE ITEM IS ALLOWED TO BE IMPORTED. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. Warehouse delivery hours: 8:30am- 5:00pm cst Monday to Friday Email address: surplus@yericomfg.com(preferred) Phone: 512-285-3444 Fax: 512-285-3499 Physical/mailing address: Yerico Manufacturing. Inc 619 Mogonye Lane Elgin. TX 78621
MKS Astex Astron i Remote Plasma Source/ Reactive Gas Generator This item has a dented cover on the left side where the in/out connectors are. And i think this is a AX7670 Model, but we are unable to power up this item, but this is suppose to be a working pull, and it comes with our 30 days warranty. Location 9D Please read the following terms of sale carefully. These terms constitute a legally binding agreement( contract) between the seller and buyer. By bidding on. Or purchasing, the product posted in this eBay listing, the winning bidder agrees to and accepts all of the terms of sale stated below. TERMS OF SALE: Only what is shown in the eBay photo and mentioned in the listing is included. Anything else should be understood to not be included. For sale is for the eBay item only. No service or tech support are included, but if you have ... morea question feel free to ask and we'll answer if we can. All sales are final. Please understand that this is an auction/liquidation environment, not a retail store, so make sure the item is right for you, before bidding. PAYMENT: We accept payment by Paypal. And we only ship to the address which the buyer provides within the Paypal payment, no exceptions. If you would like to pay with a non-Paypal payment method. Please contact us before bidding to see if we can arrange something. Buyers are given 7 days from winning bid to pay. And payment is expected of all winning bidders If no payment is made within 7 days. An unpaid item reminder will be filed with eBay, and the buyer forfeits the auction win. We are required by state law to collect sales tax on all items shipping to a CA address. CA sales tax may be waived at our discretion. But only with a valid CA resale certificate- please contact us for resale exception*before* sending payment. DOMESTIC(US) SHIPPING: Local pickup is normally not available; exceptions are sometimes made. But only for higher-value orders. Please contact us first to see if we can make this arrangement for you, don't assume that we will be able to. W
Input Voltage 208V 66 Amps or 240V 58 Amps Tube: 3cx10000a7. SKU 42414
Good used working condition. Stainless steel exterior. For up to 1500 square feet. Will be properly packaged for safe shipping.
Daihen RF Power Generator RGA-400A All Generators were removed from working production line. 16+ items available for sale. Please contact for availibity before buying- items advertised elsewhere. Shipping: Ask for the exact quote(Sea. Air, Road) before buying. Worldwide Shipping
Adtec RF Generator. AX-2000EUII, AX-2000EU2-N, Plasma Technology, 2000W, 400679 Looks very clean. We are selling as manufactured refurbished. Untested, sell as is, see pictures for more details. Price is for one unit. We describe the items and the condition as best as we can. If there are any questions or you need more info, please contact us and we will reply the same day. No other accessory are being sold with the item(Cables, manuals, Software, etc. unless it is mentioned in the description and shown in the picture. We do not have the capability to test these equipment. These are un-tested and we sell as is. see pictures for more detail. Farmon Inc. sell all equipment with no warranty expressed or implied regardless of condition. Farmon Inc. don’t have capability to verify this equipment. All sales are"As is and Where is" and ... moreare final with no returns or exchanges permitted. Farmon Inc. invites you to inspect products prior to purchase please email us at info@farmoninc.com or call us at 510-573-0047 to schedule a time. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer pays actual shipping charges using your UPS or FedEx account. There will be a $0 handling fee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are Final and No return are Accepted. We are also interested to buy your unwanted excess inventory. Please call us to review and remove your inventory. We can sometimes do in the same day. Brand we can support. Please check our inventory: We supply many other semiconductor components. Equipment, RF Generator, Chiller, Turbo, Cryo pumps, MFC, Vacuum pumps and controllers, step motors and drivers, etc. Entran Entrelec Schiele Equ
Plasma-Therm Inc HFS 3000D 3 kW 13.56 MHz RF Generator with Eimac 5CX1500A Tube& Jenning UCS300-15D2364 Capacitor Eimac 5CX1500A(5CX-1-500A) RF Power Amplifier Tube Jennings UCS300-15D2364 Variable Vacuum Capacitor This unit has NOT been tested but was pulled from a working environment Overall Dimensions: 23" Wide x 26" Deep x 60" Tall- 395 LBS This item will require freight shipping. Please contact us for a freight shipping quote. To arrange local pickup, or to schedule a viewing at our facility. SKU 44780
International Plasma Corporation RF Generator PM 109C to PM906B. PM-109D Good working used condition. Actual item pictured. Notice: Before purchase. Please be sure to check correct item type/model# needed. PAYMENT: To all buyers: full payment is due within 48 hours after auction/listing's end with PayPal. If other payment preferred or any payment questions please call us at 916-225-3615(leave message if no answer) If there will be any delay in payment, please let us know, it is just common courtesy. If you pay with a bank draft through PayPal and your payment is pending do not expect us to ship the item until payment clears. If you need to be verified with PayPal to pay for higher priced items please do so before bidding or buying. We will ship your item(s) within 1-2 business days after receipt of a cleared payment. We are willing to ... morecombine shipping on items that can physically be shipped together to save our customers money. For International Buyers: We ship most items worldwide. Contact us for any questions. do not pay for bought items until you receive shipping quote or an invoice from RedlineMerch. Otherwise same payment rules apply. For shipping costs please contact us before purchase and we will give you a quote. Most items will be sent through USPS Priority Mail or First class mail International. Always be sure your shipping address is correct and that there is a phone number at which you can be contacted at by the shipper or customs if there are any questions or concerns. Customs and duty fees and/or taxes are the buyer's responsibility. We are not responsible for your customs/duty fees/taxes! SHIPPING: We will ship your item(s) within 1-2 business days after receipt of a cleared payment. We are willing to combine shipping on items that can physically be shipped together to save our customers money. If you wish to use your shipping service or shipping account# please let us know upon purchase. let us know if you have any special shipping requests. RETURN POLICY: In the case of a seller
This AD TEC AXR 2000 III-A-NVI is manufacturer refurbished. It includes CD& Test Report. The physical condition is great. Part No: AXR-2000III-A-NV1 Additional Part No: 30163901 Additional Part No: 30196802 Additional Part No: 30201402 Includes Operations CD& Test Report Made in Japan Condition: Refurbished. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 30"x 24"x 12" 80 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not necessarily the one ... morethat will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 16 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped via the best and most
Plasma Generator CoRe Inergetix System AS-IS Condition: Item was powered on. But no further testing was done. From observation the fans appear to be working but the glass bulbs inside the unit failed to illuminate or generate any plasma. The unit is in worn overall condition with some scratches, scuffs, blemishes or residue. Parts may need cleaning or replacing to ensure full functionality. All included accessories. If any are displayed in photos. Please see pictures for damage or details. Measurements: 14" x 10.5" x 10.25" Notes: We're unsure exactly what this unit does(other than generate plasma) or what category it should be placed in. Any questions regarding its use is welcomed but no assurances that they will be answered accurately. Please see photos for additional detail and feel free to ask questions. Store: G15 ... moreOur customer's satisfaction is our top priority. In the event you experience any problems with your order. Please contact us prior to leaving a negative or neutral feedback and we'll be sure to offer a speedy resolution to any issues that may arise. PAYMENTS Paypal is the only method of Payment we accept. No exceptions can be made. Payment must be received within 3 days of the auction's end. This also applies to combined orders. Items left unpaid for more than 3 days are eligible to be relisted and have an unpaid item claim filed. SHIPPING We offer combined shipping as long as we have packaging material to accommodate the size/ weight of the items to ensure a safe shipment. Auctions must end within 3 days of each other to be eligible for combined shipping. Combined shipping is automated for items with a calculated rate. So when you are done bidding you can proceed to checkout. Any item sold by the Seattle Goodwill is eligible for local pick up at our warehouse 7 days a week between the hours of 9 a.m. to 3:30 p.m. Monday through Saturday, and 10 a.m. to 3:30 p.m. on Sundays. Please note that payment must be cleared online prior to pick up, as we are unable to accept c
March PX-1000 PX1000 plasma cleaner etching system ENI RF generator March PX-1000 Plasma claner and etcher Manufacturing date- 5/2003. 220V- 20A. Just removed from proudction ACG-10B RF Generator OEM Part#ACG-10B- Max RF Output: 1000W(1KW) Pay with your credit card through PayPal. All in state residents within our state will be charged state and/or local sales tax at the time of checkout. Payment must be received within 7 days of the close of auction. If payment isn't received within 7 days. The auction will be revoked and a Non-Paying Bidder alert will be filed. Packages are usually shipped within 48 hours of payment receipt(excluding Saturday/Sunday) Shipping costs for all orders can be determined by the shipping calculator in this auction. All orders are shipped via UPS. FedEx, DHL, or USPS. International buyers, please be aware that ... moreyou may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. PFI of Florida: 607 Savage ct longwood. FL 32750 Telephone: 4078224499. All items are sold as-is. We accept returns only if the item was not as described in the auction. Buyer must return the item exactly as received within 7 days and will be responsible for all additional shipping charges. We do our best to present accurate. Detailed information about every item we sell. If you have any questions, please contact us before placing your bid. PFI is a Florida Corporation who has been doing business since 1981. We are available 5 days a week from 8-4. Our main phone number is 407-822-4499. PFI of Florida has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type. Condition and image of the goods at the time of sale. PFI of Florida makes no express or im
PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in description. TEGAL PLASMA 903e Plasma Etcher with ENI ACG-10B RF Generator Monitor& Keyboard Condition: USED. PULLED FROM A WORKING ENVIRONMENT Estimated Packed Shipping Weight: Unit will ship by freight or is available for local pickup. Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Shipping Notice: Additional shipping charges may apply; pending location. Size and weight of the item(s) Lister: DL Can't find the answer you're looking for? contact us! Business ... moreHours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday. Email Address: Please Use The eBay Messaging Service, Phone: 408-762-7286, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be securely packaged or palletized and shipped via the best and most economical way possible. We typically ship within 1 business day however. Und
Best4industrie- e-bay Uwaga! Używasz przestarzałej przeglądarki. W wyniku czego strona może być nieprawidłowo wyświetlana. Aby nie oglądać więcej tego komunikatu i cieszyć się widokiem poprawnie wyświetlanych stron, zaktualizuj swoją przeglądarkę! Contact data Telephone: +49(0) 173/7283291 E-mail: info@best4industrie.com Web: www.best4industrie.com About Us Our hotline operates 24/7. Optionally you can contact us via email. We'll check how fast we can help you and will contact you immediately. Your satisfaction is important to us. Best4industrie is composed of industry experts. Our work is our passion. Many years of industry experience allowed us to learn to know the market and the needs of our customers very well. We offer brand new and used tools in good operating conditions. Low prices and high quality equipment is our way of doing ... morebusiness. Delivery Shipment with DHL Germany Worldwide Huettinger TRUMPF generator Tru plasma MP060 Aplleid material PECVD pvd AMAT. This is a barely used(low hours) plasma generator Hüttinger Electronic with 4000 watts connection 3x400V 50/ 60Hz. Welcome to the official Best4industrie eBay Retail Store. Best4industrie is operating from Germany and offering a broad assortment of new and used products from industrial mechanics. Automatics and robotics. In our offer you can also find laser and motors, industrial ovens and pumps. Our inventory is always changing, check back often for new products and sales. Please take a moment to browse our site and learn more about our company and services. We are committed to: providing what you need, at low prices, and timely delivery, offering delivery according to client's needs, being business partner for our clients, providing special offers for our loyal customers, and last but not least we guarantee high quality of our products, Before the item reaches you: we closely check each item to make sure that it is in good operating condition, the items are tidily packed as to ensure that they reach you safely, all items are shipped secu
This NP New Power Plasma NPK-300 MF Generator Rack is used working surplus. The physical condition is good. But there are some minor scratches from previous use and handling. This unit includes photos of cables and rear door missing latch. P/N: NPK-300 Ver. 01 NPG-10KM(Qty. 3) NPX-103A. Ver. 1(Qty. 1) CE Marked Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 40"x32"x68" 536 lbs. Requires Freight Shipping Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured ... moreserial number, date or country of manufacture is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 17 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 7.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All it
Modulion plasma generator air purifier. ionic therapy: ions can improve health and breathing. a mild electrostatic field penetrates skin and pulmonary vents. air purification: plasma ions electrify dust. Microbes, and vapor in air, making them cohere and fall. this can reduce even submicron molecular particles, including toxic traces of radioactive isotopes. ions increase the healthy effects of your other decontamination equipment. illuminated rocker switch. 4 protected needle point electrodes(a tiny glow can be seen as a finger or probe is passed near them) durable polycarbonate case, in an ancient cryptic ark style. tilted to project plasma in air. 110-120 volts AC. recommend placing plasma generator near a bed or work station.
Plasma Therm HFS-3000D RF Generator Cabinet Included. Please Note: Crating and shipping charges are not included in the sale price. Please contact us for crate and shipping quote before your purchase. Complete cabinet weighs 386lbs without the crate. Cat# R704 Loc. WH,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-14c0b6b7297-0x100-
ENI GHW-12Z RF Plasma Generator P/N GHW-12Z-13DF2N0-001 Buy it Now We will make every effort to describe items as fairly and accurately as possible. We are not experts in every field and therefore cannot fully test all items for full functionality. If you recieve an item that is DOA or something that is not described accurately please call us as soon as possible and we will work something out. Thank you for your business. DESCRIPTION: Used ENI GHW-12Z RF Plasma Generator. Item condition is 9 out of 10. We do not have the ability to test so we are sellinig AS IS. If you have any questions feel free to call our store. at(845) 338-6191 SPECIFICATIONS: ENI GHW-12Z RF Plasma Generator P/N GHW-12Z-13DF2N0-001 SHIPPING: This item ships by UPS GROUND Service. Cost is automatically calculated by e-Bay's shipping calculator. FAST SHIPPING! Item ... moreships out day of payment. Will arrive in 2-3 business days. INTERNATIONAL SHIPPING: We ship Worldwide. We will ship using USPS Priority Mail International. UPS International or Fedex International. We can also use buyer's shipping service and shipping account. FREIGHT SHIPPING: A contact name. Current phone number and company name are required for all shipments. You will be notified within 1-3 business days after purchase for shipping charges and dimensions before an invoice can be sent. Please let us know if a lift-gate is required as additional fees will apply. You are welcome to arrange your own transportation. We will provide you with accurate dimensions of the freight. Please contact us at 845-338-6191 to arrange a collect freight shipment, PAYMENT: PayPal is preferred payment method. All major credit cards are accepted by Phone(845) 338-6191. WARRANTY: AS IS Thank You& Good Luck Bidding! Item# SUR028(S) P&T Surplus Corp