In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
7315.83
Buy It Now
Condition: Used
Location: Singapore
Item ID: 4896. Part Number: 8860 / 8065. We will review and approve your price match request on a case by case basis. Kindly review images thoroughly ... morebefore purchasing. If there are more than (1) quantity, do feel free to reach out to us for an actual image of each unit.
$
4250.00
Buy It Now
Condition: For parts or not working
Location: Temple, United States
6", 150 MM. WE'LL SKID, WRAP AND STRAP.
$
4000.00
Buy It Now
Condition: For parts or not working
Location: San Jose, United States
$
14650.00
Buy It Now
Condition: Used
Location: Dublin, United States
This item is a used Micromanuipulator 6200 prober station. Has Leitz zoom microscope, 4" chuck. Dublin, CA 94568.
$
12000.00
Buy It Now
Condition: Used
Location: San Francisco, United States
LEFT-HANDED MICROMANIPULTOR WITH 4 COMPOUND MICROSSCOPE, 6" WAFER AND NEW WAVE LASER. NOTE LASER UNIT IS NOT WORKINGSERIAL NUMBER 930474PICK UP ONLY AT ... moreSAN FRANCISCO, CA 94124
$
5500.00
Buy It Now
Condition: Used
Location: Milpitas, United States
Suss Microtech PM5, PM6, PM8, PA200. Cascade Summit 12K, REL 4800, REL 6100, EPP Series and newest models. Local Pick up is free we can load from dock. ... moreHeight (with table and front lid opened): 42". Bank Wire Transfer.
$
75000.00
Buy It Now
Condition: Used
Location: Morgan Hill, United States
841 Teradyne Planarization kit for Electroglas Model #961-788-00. 842 Xynetics Electroglas 2001X MUX boards. 385 ELECTROGLAS 251074-002 / 251074002. 252 ... moreElectroglas 244288-001 REV AF/L TESTER INTERFACE PCB Board.
$
35000.00
Buy It Now
Condition: Used
Location: China
We sell the ELECTROGLAS EG 4085X wafer probe or prober at fully refurbished.Complete,working condition to OEM spec. The system is in our Santa Clara facility. ... moreLead time is 6 weeks against official PO and payment. The valid term is subject to sales.Please contact us for availability. Here is the configuration for the system for your reference.The actual configuration will be specified in our official quotation. Wafer Size Range: 200 mm Cassette to Cassette Temperature Control Chuck optional Automatic Alignment OCR Camera Weight: 850 lbs Installation with warranty is optional at extra cost. We also have the following.Please contact us for availability. EG 2001 probe* EG 4085 probe* EG 2080 probe* EG 2010 probe PLEASE NOTE: WE ARE SELLING ALL ITEMS AT"AS-IS" We have good source for the following used semiconductor equipment and New Semiconductor Equipment/ System. Please contact us by e-mail for more information.We will do our best to meet your budget. Rapid Thermal Process: AG Associates Heatpulse 610 | Heatpulse 410 | Heatpulse 210 Plasma Asher Descum: Matrix 105R | Matrix 105/205/106 | Branson IPC L3200 |Branson IPC 2000/3000/4000 | Gasonics L3510 | Gasonics Aura 1000 | Gasonics Aura 3010 | Gasonics Aura 2000LL Plasma Etch/RIE/ICP: Tegal 901e | Tegal 903e |Tegal 901e TTW | Tegal 903e TTW | Lam Rainbow 4420/4428 | Lam Rainbow 4520/4528 | Lam Rainbow 4620/4628 | Lam Rainbow 4720/4728 | Lam AutoEtch 490 | Lam AutoEtch 590 | Lam AutoEtch 690 | Lam AutoEtch 790 | Matrix 303 | Gasonics AE 2001 | STS Multiplex ICP Sputtering Deposition System: AccuSputter AW 4450 | Perkin Elmer 4450 Sputter | Perkin-Elmer 4410 | Perkin Elmer 2400 Sputter Systems Metrology and Tester: Tencor M-Gage 300 | Hitachi CD-SEM 8840 | Hitachi CD-SEM 8820 | Hitachi FE-SEM 4700 | Hitachi FE-SEM 4500 | HP 4062UX Tester | HP 4145A/B Tester | EG 2001 Wafer Probe | EG 1034 Wafer Probe Please Note: We do not arrange the shipment overseas. For international shipping. Please send us your account(FEDEX) or ask your forwarder to pick up the item
$
24500.00
Buy It Now
$1575.00 Shipping
Condition: Seller refurbished
Location: San Jose, United States
QTY 2 positioners (Cascade MH series or compatible series from Micromanipulator). High power Mitutoyo microscope with 2x,20x, 100x objectives and 10x ... moreeye pieces total magnification 2000X. Ilumination system for the microscope with the fiber optics & Light source as shown in the picture.
1 2 3
 In 

Former Listings  
 
Cooper/ Heraeus Lasersonics LS-11 Laser Beam Micromanipulator
Heraeus Lasersonics LS-11 Laser Beam Micromanipulator Pre-owned. In GOOD cosmetic condition. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item.
NT-88 Narishige Micromanipulator System
NT-88-V3 w/dual motor coarse and hydraulic fine manipulators with Nikon TE2000/Ti Bracket. These manipulators were used strictly for demonstration purposes only. They were tested and are in perfect working mechanical condition. Nikon Part# 90847 Nikon List Price: $22.695.00 Shipping and Return Policy: If your item qualifies for a return and you are not satisfied with the item after receiving it within 7 days. Please notify us first and allow us the opportunity to rectify the situation. Customer Satisfaction is important to us and we always try to describe our items honestly and accurately. Buyers pay the postage to return the item. We will refund money back to buyer or replace the item at the buyers request. If you are not sure about a particular item. Please contact us with your questions before your purchase. Our preferred partners for ... moredomestic shipping are UPS and USPS. Email confirmation of the shipping date and tracking numbers(if applicable) will be provided. Feedback: When you receive the item. Please feel free to contact us with any questions,we will do our best to satisfy you and/or provide you with technical information regarding the item. If you are satisfied with your purchase, please leave feedback Check out my! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Micromanipulator Co. Model FET PS4 Probe Power Supply
Micromanipulator Co. Model FET PS4 Probe Power Supply Has general signs of normal wear and tear which may include scratches. Scuffs, dirt, sticker residue etc on the exterior casing. PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in description. Unit is in good cosmetic condition. Missing one knob as shown in photos. Condition: Used Estimated Packed Shipping Weight: ~4 lbs. Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Lister: KG Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 4:00 ... morepm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday. Email Address: Contact via eBay messaging system Phone: 408-762-7285, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be securely packaged or palletized and shipped via the best and most economical way possible. We typically ship within 1 business day however. Under certain circumstance
SHARPLAN 1075 LASER WITH MICROMANIPULATOR
Here is a Sha rplan 1075 Laser with Micromanipulator in good physical condition. We are unable to test fully. Please feel free to email or call with any questions. The ask a question link is on the left towards the bottom. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Able Supply LLC Madison WI 53718(608) 669-3680 Thank yo u for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-144fc6a5401-0x114-
MICROMANIPULATOR FROM A ZEISS SURGICAL MICROSCOPE
MICROMANIPULATOR FROM A ZEISS SURGICAL MICROSCOPE COMES WITH A MOUNTING BRACKET TO HOLD THE OBJECTIVE I DO NOT KNOW THE MANUFACTURER OF THIS ITEM SOLD AS IS AS SHOWN
Eppendorf TransferMan NK Micromanipulator 5171
This listing is for an used working Eppendorf TransferMan NK Micromanipulator 5171. The item was removed from a working environment. Sold AS IS.
Micromanipulator I.C. Holder Interface Cards
Up for sale is 6 Micromanipulator branded I.C. holder/interface cards. The model numbers of the cards are SSCV-64DIP. SSCV-22DIP, SSCV-20DIP, SSCV-40DIP
MICROMANIPULATOR MICROSCOPE LIFT W/ BAUCH & LOMB MICROZOOM nvd-os
MICROMANIPULATOR BASE W/ BAUSCH& LOMB MICROZOOM INCLUDES: Bausch& Lomb MicroZoom Microprobing Microscope with Camera Port* 4 Place Nosepiece* Continuously Variable Rheostat Transformer(Not shown in pictures) Microscope Translation Controls Note: Sold as is. I am unable to test. Please ask if you need additional accessories such as Eyepieces, objectives etc. Sold as is Cons-NVDC-OS
! Emerson Micromanipulator XY / Tilt Positioner Table Metalworking Tooling
RDR ELECTRONICS WILL ONLY SHIP TO U.S. ADDRESSES. FOREIGN BIDDERS WILL BE APPROVED TO BID ONLY AFTER PROVIDING A U.S. SHIPPING ADDRESS! Auction consisting of: 1- Emerson Micromanipulator Metalworking Tooling. This auction is for a used Emerson Micromanipulator. It looks to be in serviceable condition. The metal joystick moves the adjustment table in both X and Y directions. The front channel moves from side to side with the knurled adjustment knob, its movement is nice and smooth. The front and back tilt feature works by adjusting the back disk. The base is 3" x 4 1/2" Our tests were brief and we have no way to test it in its intended application, but it looks to be in reasonably sound condition. We have a great starting bid and we are including a 30-day warranty on this sale! Only what is listed above and/or shown in the pictures ... morebelow are included in this auction. Item weighs about 14 pounds. Used condition. This item is being sold with a 30-day warranty. Check the shipping calculator for S/H cost to your ZIP code. Item will be insured for the bid amount. To view all of our current E-bay auctions click on our RDR-Electronics Items for Sale Page link below! Click on any image for a more detailed view. Click on any image for a more detailed view. Click on any image for a more detailed view. Terms and Conditions: There is no need for us to email you after the auction ends. Simply pay the amount of the winning bid plus the S/H indicated by the shipping calculator for your ZIP code. We do not try to make(or lose) money on our S/H cost. We try to offer quality shipping at a fair price. We use new boxes. Peanuts, and bubble wrap and try to pack our items well(check our feedback) We pack items immediately after auction closing. If you are bidding on multiple items please contact us and we will be happy to combine items if possible to lower cost. If you desire combined shipping, contact us before payment and we will send you a revised eBay invoice. This item will be insured for the winning bid amount. S
Eppendorf Transjector 5246 Laboratory Cell Microinjector Micromanipulator
Eppendorf Transjector 5246 Laboratory Cell Microinjector Micromanipulator Move mouse over images to see larger version Click to view supersized image Eppendorf Transjector 5246 DESCRIPTION: The Eppendorf Transjector 5246 is designed to provide a variety of options in electrophysiology by combining a micro-injector with a module for holding cells. While a single cell is held with the aid of the hold function. The inject function can be used, for example, to apply pharmaceuticals to the outside of the cell or to inject into the cell. The 5246 has a total of 4 out-puts with the outputs I1 + I2 available for microinjection while the additional outputs T1 + T2 enable the holding cells. MODEL: Transjector 5246 CONDITION: Pulled from a working environment. Item powers up and beeps. There is no light indicator to show that the machine is powered ... moreon. May have a few minor scuffs/scrapes on outside plastics but in overall excellent condition(see pictures) 14 day DOA Warranty. Power Cable Included. Location ID: ALEX-F5 Alex. Payment: Preferred mode of Payment is PayPal. Cashier’s Check and Personal Check are all accepted modes of Payment. Please contact us if these are needed to submit payment. Shipping: Purchases will be shipped via FEDEX or USPS. Please note the EBay Listing shows UPS shipping but FEDEX is our preferred carrier. We guarantee to ship your item within 48 hours(except weekend and public holidays) after payment has been received Your Tracking number will be sent to you via email once the item has been shipped out. Never accept a damaged package! Instead reject the package and contact us ASAP. International Sales: USPS Express Mail International is our preferred shipping method. All import duties& taxes are responsibility of the buyer. We do offer FedEx Air Freight for items not able to be shipped USPS. International Buyers Interested in Container Quantities- PLEASE contact us through EBay Messaging for more information and pricing. Freight: All Heavy and Bulky items that do not meet the weight and si
Technical Instrument Micromanipulator Joystick Control
Technical Instrument Micromanipulator Joystick Control Used. We were not able to test this controller but it is guaranteed against DOA. All pictures contained in this auction are of the actual item up for auction. Click on the pictures to enlarge them to full size. 03* This item is being sold by NeoMicro LLC. of Santa Rosa. CA, a broker of used bio-medical laboratory equipment. Attention buyers. Please note: 1) This item(unless stated otherwise previously) has been opened from the original box and is used. 2) This item has not been altered in any way that significantly changes the product's performance or safety specifications. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the ... moreitem is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Contact information: Our contact information will be provided to the high bidder upon auction completion including our address and phone number. If you are having email problems. It is possible that our email is being stopped by your spam filter. Make sure you check your ebay registered email. Our software, Ebay's Blackthorne Pro uses your ebay registered email address for communication not Ebay messaging. This is an internet based business, so the majority of our communication will be done through email and ebay messaging. Payment: We accept payment through PayPal from US and Canadian account holders with a confirmed PayPal address. All California residents will be charged 8.75% sales tax. Payment must be received within 7 days of the time you receive your total including shipping. Shipping: We ship within the United States and Canada only. Unless listed otherwise in the individual auction. We do not ship to PO boxes including APO/FPO. If the auction does not specifically list international shipping options and you are outside of the US or Canada
De Fonbrune Micromanipulator & Micro-Forge No. 58090 Operating Instructions
De Fonbrune Micromanipulator& Micro-Forge No. 58090 Operating Instructions* FREE SHIPPING! Details Condition: Fair Schematics: No Parts List: No All manuals are complete and the pages are in good condition. Unless otherwise noted. Note that condition above refers primarily to the manual binding(Excellent, Good, Fair, Poor) You will receive the exact manual shown in the photo. Shipping FREE US shipping by Media Mail International shipping varies by destination- Shipping combined for multiple manuals(Click photos to enlarge) MANUAL-0456 Powered by
LEICA ERNST LEITZ GMBH WETZLAR MICROSCOPE w/ 2 Mechanical Micromanipulator
Please Read Item/Unit Condition: 1) Used. Working condition 2) Very nice cosmetic condition. Wear of minor scratched from the age of sage/ look photo 3) Item is sold"as is" 4) No guarantee 5) Tax's. Duties,Tariff at your Country are not added in sales price,Buyer's must be shoulder. LEICA ERNST LEITZ GMBH WETZLAR MICROSCOPE W/ TYPE: 027-035.002& POWER SUPPLY EYEPEICE: LEICA PL-10X/18X OBJECTIVE'S LEICA LEITZ WETZLAR- 1 70/ 4/ 0.12) LEICA LEITZ WETZLAR- 170/ 0.17) 100/ 1.30 OIL) LEICA LEITZ WETZLAR- 170/ 0.17) 40/ 0.65) LEICA LEITZ WETZLAR- 170/ 10/ 0.25) LEICA TELESCOPE SIGTH- 16X 2- Precision Mechanical Micromanipulat or MADE IN GERMANY This unit good working. Power supply accurate, good objectives,eye piece clean,variable ligth/power supply good working, knobs can roll smoothly, i dont know if there is missing ... moreon this vintage microscope from 1967 and confirm from his Old Label. 2 Precision Mechanical Micromanipulat or adjustment work smoothly.but we don't know how to operate the micromanipulator. Please check our actual photograph attached, Very good cosmetics condition clean. may have some dust or wear of some scratched from age of usage/ check picture. what you see exactly you get. I sold as for parts. The unit we sold AS-IS Basis. This unit is heavy.Please contact if you have prepared shipping. Please see pictures and the item descriptions further down for more details. Please look over the photos carefully and do not assume anything about the item(s) included in this listing. This item is sold as you see in the pictures. Unless otherwise stated. If it is not pictured or not listed, it is likely not included. We are not experts and do not claim to be with any of the items we sell. We do the best research we can in order to properly represent the item(s) as clearly and honestly as possible. We strongly encourage buyers to do their own research beforehand. If you have any questions, please ask before you make your purchase and we will do our best to
Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator
Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator- Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator. Serial#s 8205: This auction consists of a pre-owned Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator which is in Good physical condition. The Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator is manufactured as a metal component which has 2 round metal dials(1 is large& 1 is smaller) contained on it. This Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator also has a thin pen– like component connected to it by a very thin tube– see photos. This Auction Includes: The Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator– ONLY. It is sold exactly how it is displayed in the provided photos& everything that is included in this auction is contained in the provided photos. The Narishige MO-8 Single ... moreAxis Oil Hydraulic Micromanipulator has not been tested in any manner. The seller does not have the means or the expertise to test the Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator in any manner. The seller has absolutely no experience in the field which the Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator might be used. The seller simply has no way of installing& testing Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator in any manner. Guarantees& Warrantees Provided With The Sale of The Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator: Obviously since the seller has not tested the Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator in any manner. The seller is unable to provide any warrantees or guarantees in regards to its working condition. The working condition of the Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator must be listed as"unknown" for the purposes of this auction. The Narishige MO-8 Single Axis Oil Hydraulic Micromanipulator is on auction in"As-Is" fashion without any guarantees or warrantees. All Sales are Final& Returns will Not be accepted. Summary of the Narishige MO-8 Si
Heraeus Lasertronics LS-11-E Laser Beam Micromanipulator - Laserbeam - GREAT!
MST& ASSOCIATES. INC. 800-608-4534 x 1 Your Surplus Equipment Specialists. Est. 1996 Petersburg. VA Thank You for your interest in our listed items! We appreciate your business and will gladly answer any questions that may have. Feel free to call or email. Our live operating hours are Monday-Friday 8AM-4PM Eastern Standard Time. MST& Associates has been providing Medical and Surgical equipment all over the world since 1996. We gladly work with customers in the United States and Internationally. If you are looking for something specific. But do not see it in our Ebay auctions, please contact us with a list of what you are looking for. We operate out of 4 large warehouses and have many different items available. Needless to say, we have a bit of everything, and if we do not have what you are looking for, we can certainly try to track ... moreit down for you. ITEM DESCRIPTION: The Item you are bidding on is a HERAEUS LASERTRONICS LS-11-E LASER BEAM MICROMANIPULATOR REF: LS-11-E SN: 11480989 Unit is used. Untested, Unable to test. Overall GREAT physical condition. No major physical damage that seems to affect function. Unit may show some other signs of wear& tear. Use, sticker residue, writing, etc. Sold as is. See pictures of actual item to be received above! Item came from working facility less than one week prior to auction start. Item will have MST Tamper Sticker when shipped. Feel free to email with any questions or concerns. PAYMENT: Payment accepted through Paypal. Credit Card, Wire Transfer. Payment must be made 48 Hours after auction ends. If you have a problem with this, contact me BEFORE bidding. If payment has not been received, or no contact has been made, we reserve the right to re-list the item and the purchaser will no longer have the right to purchase the item. Any non-paying eBay member will be placed on the block list, and will no longer be able to bid on any of our items. All items will have a 5% Virginia sales tax added to the final price. The sales tax will not be applied to shipping and han
lumenis coherent clearspot 350 MICROMANIPULATOR w accessories and case
CLEARSPOT 350(CS 350) The ClearSpot 350 is a general-purpose micromanipulator intended for use in a broad range of“larger spot” surgical applications. Such as gynecology. Its flexible optical design can deliver spot sizes from 350 microns to 4.0 mm over a wide range of working distances. FEATURES• Spot size as small as 160 mm with ClearSpot 160• ClearSpot 350 delivers a spot size of 350 microns to 4.0 mm over a wide range of working distances• Smooth joystick manipulation with adjustable tension
LINE TOOL A-RH XYZ PROBE POSITIONER MICROMANIPULATOR
Actual pictures shown DESCRIPTIONS Make: LINE TOOL Model: A-RH SN: None Physical: Used/ good Operational: Fully functional Package includes: 1) Right-Handed Positioner WARRANTY Full 7 calendar days upon delivered ~ Warranty void if seal is broken ~ SHIPPING DOMESTIC: FREE UPS/FedEx Ground. Insured. Hawaii and Alaska excluded. INTERNATIONAL: Partial discount. Email for quote. All smaller packages with lower values will be send by USPS EMS. All larger packages with higher values must be done through UPS/FedEx. PAYMENT eCheck Paypal Pay upon pickup Other options. Please contact us*California buyers pay sales tax. POLICIES Buyer pay shipping costs for returning the products. All returned items must be the same condition as shipped in order to receive a refund. International buyers held responsible for all import/ export duty fees. Payment must ... morebe made within seven(7) days of auction's end. Contact(408) 396-5277 Copyright © Moni-Comp Tech 3 All Rights Reserved.
Rucker & Kolls Model 330 Probe Head XYZ Micromanipulator 3 Axis Micropositioner
Rucker& Kolls Model 330 Probe Head XYZ Micromanipulator 3 Axis Micropositioner This listing is for(1) Rucker& Kolls Micromanipulator 3 Axis Probe Head. Model 221. This item is used but in good working and physical condition. The top knob has a little side to side play, but does not affect the function. GUARANTEE 100% Satisfaction Guaranteed. If you are not fully satisfied with this unit we will refund your money. SHIPPING SERVICES Local Pick-up allowed. Unless otherwise requested. Shipping will be via USPS. Shipping charges will be only what USPS charges. Shipping via Flat Rate Priority Mail will be used if the cost can be reduced. There will not be any additional charges for packaging or handling when using priority mail. Multiple items will be combined to reduce shipping costs. INTERNATIONAL SHIPPING SERVICES International Buyers– ... morePlease Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. PAYMENT Credit Card or Paypal preferred. All other forms of payment accepted. Checks must clear before item will be shipped
Rucker & Kolls Model 221 Probe Head XYZ Micromanipulator 3 Axis Micropositioner
Rucker& Kolls Model 221 Probe Head XYZ Micromanipulator 3 Axis Micropositioner This listing is for(1) Rucker& Kolls Micromanipulator 3 Axis Probe Head. Model 221. This item is used but in good working and physical condition. The side and top knobs have a little side to side play, but does not affect the function. GUARANTEE 100% Satisfaction Guaranteed. If you are not fully satisfied with this unit we will refund your money. SHIPPING SERVICES Local Pick-up allowed. Unless otherwise requested. Shipping will be via USPS. Shipping charges will be only what USPS charges. Shipping via Flat Rate Priority Mail will be used if the cost can be reduced. There will not be any additional charges for packaging or handling when using priority mail. Multiple items will be combined to reduce shipping costs. INTERNATIONAL SHIPPING SERVICES International ... moreBuyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. PAYMENT Credit Card or Paypal preferred. All other forms of payment accepted. Checks must clear before item will be shipped:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1456b33ebd8-0x111-
Rucker & Kolls Model 222 Probe Head XYZ Micromanipulator 3 Axis Micropositioner
Rucker& Kolls Model 222 Probe Head XYZ Micromanipulator 3 Axis Micropositioner This listing is for(1) Rucker& Kolls Micromanipulator 3 Axis Probe Head. Model 222. This item is used but in good working and physical condition. The top and side knobs have a little side to side play, but does not affect the function. GUARANTEE 100% Satisfaction Guaranteed. If you are not fully satisfied with this unit we will refund your money. SHIPPING SERVICES Local Pick-up allowed. Unless otherwise requested. Shipping will be via USPS. Shipping charges will be only what USPS charges. Shipping via Flat Rate Priority Mail will be used if the cost can be reduced. There will not be any additional charges for packaging or handling when using priority mail. Multiple items will be combined to reduce shipping costs. INTERNATIONAL SHIPPING SERVICES International ... moreBuyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. PAYMENT Credit Card or Paypal preferred. All other forms of payment accepted. Checks must clear before item will be shipped
Lot of 5 Rucker & Kolls Model 221 & 222 Probe Heads, XYZ Micromanipulator
Lot of 5 Rucker& Kolls Model 221& 222 Probe Heads. XYZ Micromanipulator This listing is for one Lot of 5 Rucker& Kolls Micromanipulator 3 Axis Probe Head. Models 221& 222. These items are used but in good working and physical condition. Some of the knobs have a little side to side play but does not affect the function. GUARANTEE 100% Satisfaction Guaranteed. If you are not fully satisfied with this unit we will refund your money. SHIPPING SERVICES Local Pick-up allowed. Unless otherwise requested. Shipping will be via USPS. Shipping charges will be only what USPS charges. Shipping via Flat Rate Priority Mail will be used if the cost can be reduced. There will not be any additional charges for packaging or handling when using priority mail. Multiple items will be combined to reduce shipping costs. INTERNATIONAL SHIPPING SERVICES ... moreInternational Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. PAYMENT Credit Card or Paypal preferred. All other forms of payment accepted. Checks must clear before item will be shipped
Micromanipulator 6200, 6", QTY 4 Positioners, Refurbished, Mitutoyo Microscope
This machine is fully refurbished with new belts. Refurbished stage, microscope transport and lift mechanisms are all rebuilt to original factor condition. Comes with everything shown in the pictures: 1. High power Mitutoyo FS microscope with 2x. 10x, 20x objectives and 10x eyepiecs 2. QTY 4 positioners 4. QTY 4 probe holders(not shown in the pictures) with set screw to hold probe tips 5. Box of probe tips(as shown) 6. Illuminator for microscope with fiber optics as shown in the picture and remote switch. If you need a formal quote. Send us an email. Shipping is Free US wide. USA installation available and warranty is available up to 90 days if we install. Extended warranty available. Contact for quote for installation. International shipping contact for quote.
Stereotaxic Micropositioner Micromanipulator with Electrode Arm
This micropositioner is in excellent cosmetic condition. It moves freely and easily. The arm for holding an electrode or needle is also included. I believe this was made by David Kopf but I can’t find the mark anywhere. This will carry a 14 day return warranty. Minus shipping, if you are unhappy with your purchase. Personal checks, certified funds and PayPal are all welcome. Thanks for looking! Powered by The free listing tool. List your items fast and easy and manage your active items.
Micromanipulator Co. Micropositioner Model 550
Micromanipulator Co. Micropositioner Model 550 Used and looks to be in good condition. Minor blemishes in isolated areas. Calibration is not guaranteed. Item has not been tested. Knowing this. Unit is being sold as is, no returns. Items are guaranteed to be exactly as described. We want you to be satisfied with your purchases from us. WE HAVE MORE Test equipment on eBay this week:
World Precision Instruments Manual Micromanipulator (right-handed) (M3310R)
The world's most widely used micromanipulator Weighing just 550 grams and employing a slim space-saving design. This well-built micromanipulator outsells all others worldwide for high precision experiments where magnification is in the range of up to 250x. Its design allows units to stand tightly grouped- since all control knobs project to the rear. And because control knobs are clustered within an 8 cm area in a single vertical plane, resolution is quick- the hand works blindly while the eye monitors the microscopic image. Vernier scales allow readings to 0.1 mm; x-axis fine control allows readings to 10 microns. Vernier scales allow readings to 0.1mm& x-axis fine control allows readings to 10 micrometers, Control knobs project to rear and are located in same vertical plane, Tilting base not included,
Laserscope Microbeam II Micromanipulator
The Alternative Source Medical Laserscope Microbeam II Micromanipulator Please inquire if you would like more pictures or information. Please view pictures- what is pictured is what is sold. This item is untested. But we would be happy to test upon request, no purchase necessary. This item is sold in as-is working condition. See below for details. Do not hesitate to contact me at Law@tasimed.com or 847.419.0123 We will do our very best to respond to all questions within 24 hours Our phone is operative Monday- Friday 9:00am to 5:00pm CST. Email is available 24 hours a day Our goal is make sure you are satisfied with your purchase. Please let us help Please pay promptly upon purchase of the item. Sales will be cancelled if payment is not received within three days after purchase. We accept all major credit cards- Visa. Mastercard, Discover, ... moreAmerican Express, PayPal, Items will not ship until funds have cleared. Our normal handling time is three days. But this may vary dependent on the item. Shipping and handling is paid for by the purchaser. We ship FedEx unless instructed otherwise. We can expedite shipping upon request. Contact us for a quote! We are happy to combine purchases to save on shipping costs. For international shipments. Purchaser is responsible for all Taxes, Custom, Duties and other fees for exportation/importation. Unless otherwise stated. All items are sold in As-Is Working Condition. That is to say that upon delivery, the units will work and function as expected. If the item does not function upon delivery contact me immediately at Law@tasimed.com or 847.419.0123 for a refund upon return of the defective items. Unless stated otherwise. We do not offer extended warranties beyond delivery and acceptance of the item by the purchaser. Please read and review the full listing before purchasing and ask questions if you have any concerns. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this ite
Model H1001 Heat Control and C1000 Cooling Module Micromanipulator Temp Control
Model H1001 Heat Control and C1000 Cooling Module Micromanipulator Temp Control Has general signs of normal wear and tear which may include scratches. Scuffs, dirt, sticker residue etc on the exterior casing. NOTE: This item can only be shipped to a U.S. destination. NO INTERNATIONAL SHIPPING PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in pictures. Model H1001 Heat Control and C1000 Cooling Module Micromanipulator Temp Controllers Condition: Used and untested. Plugged in and powers on. Left side powers on. Couldn't get the right side to come on Estimated Packed Shipping Weight: ~ 18 lbs. Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. ... moreThe pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Lister: LR Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday. 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday Email Address: Contact via eBay messaging system Phone: 408-762-7287, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax app
Heraeus Lasersonics inc. Micromanipulator in Wooden Case.
Heraeus Lasersonics inc. Micromanipulator LS-11 f-400 f-175 The cosmetic condition is GOOD with minor surface imperfections that are consistent with previous use. See pictures for an accurate depiction of this item's quality. Comes with everything that is pictured here. If it is not either pictured or mentioned it is not included. Sold AS IS. For Inquiries contact me through eBay The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Ernest F Fullam Single Probe Micromanipulator in Wooden Box Mitutoyo Mic
Ernest F Fullam Single Probe Micromanipulator in Wooden Box Mitutoyo Micrometer. Looks to be in good condition. But I don't know much about these, so sold as is. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-145d664439d-0x105-
Micromanipulator w/ New Wave EZLAZE/532 Mitutoyo FS-60 Scope M Plan APO SL20
Micromanipulator w/ New Wave EZLAZE/532 Mitutoyo FS-60 Scope M Plan APO SL20 Micromanipulator w/ New Wave EZLAZE/532 Mitutoyo FS-60 Scope M Plan APO SL20 Designed for a wide range of testing applications. The Micromanipulator P200L comes standard with features such as single-point ground and integrated thermal chuck plumbing. Built for reliability as well as precision, the P200L features leadscrew– leadnut stage and platen drives, a stainless steel platen with removable front wedge and high stability microscope bridge that supports all high resolution long-working distance microscopes. Details: Manufacturer: The Micromanipulator Co. Inc. Model: Unit is not labeled. But appears to be a P200L(w/ 200mm chuck) s/n 914664) Microscope Model: Mitutoyo 378-134-4(FS-60? not labeled) with M Plan APO SL20 0.28 8/ 0 F=200 Objective Oculars: 2) Mitutoyo ... moreWF 10X/24 Laser: New Wave Research EZLAZE/532 with Power Supply. Controller and Foot Pedal Camera: Sony CV-710NDC w/ Power Supply and Video Cable Unit includes only the items pictured The EzLaze Laser provides users with the capability to perform a wide range of laser cutting operations for semiconductor design verification and failure analysis as well as LCD repair applications. Unit may be available to part out. Please contact us for more information. NOTE: Due to the size and weight of this item. It will ship ground freight. Please contact us for a quote. Local pick-up is always welcome. Freight within CA is a $75 flat rate(Not including lift-gate fee. If applicable) Condition: Good cosmetic condition with some signs of previous use(See photos for more detail) Tested: System was removed from a working environment. But we do not have the resources to test it. System may be incomplete. Only the items pictured will be included. May require additional components or assembly to be used. Please verify before purchasing. Contact us if you have any questions. Warranty: As-Is. No Returns SKU: 395286 Please review our Help page for all of our Terms and Conditions before b
Suss PM8 Micromanipulator 6150, Suss PM300, Micromanipulator 8060
The PM8 prober is in good working condition PM8 with Mitutoyo microscope& Temptronics hot chuck/controller.
Micromanipulator Co. Model 6700 Probe / Prober Station
Fiber Optic Tools and Supplies BUY | SELL | TRADE surpluseq.com SurplusEQ Product ID:253712. Our Description This probe station used a Bausch and Lomb microscope with 20x magnification eye pieces. The four objectives attached are 4x. 10x, 25x and 40x. The microscope is also on an X, Y and Z axis for very precise observations. There is a steel plate used for magnetic based probers and a chuck with vacuum and heat capabilities. It is believed to also cool, but we are unsure. The chuck is also positionable through a crank; however, it doesn’t seem operational(possibly due to a track needing to be replaced) A cord is also included with one tear in the coating. The cord is believed to heat the chuck. The overall condition of the station is good with some cosmetic wear. Manufacturer Description The Model 6000 Series Test Station(Ref. Fig. 1-1) ... moreprovides probing capabilities for failure analysis. Research and development design analysis and device characterization analysis It is also compatible with all of The MICROMANIPULATOR Co. extensive line of probes and accessories, making it an excellent foundation on which to build a complete probing system. The optional probe card holder and high resolution magnetic or vacuum based manipulators allow probe cards and high resolution diagnostic probes to be simultaneously used. The vacuum chuck can be easily lifted off and replaced with the socket chuck for probing packaged devices, or the hot\cold chuck from specialized testing applications. Replacement of the vacuum chuck is just as simple, with no tedious re-planarization by the user. The 6000 Series Test Station features the MicroZoom ® or FS-60 microscopes which combine high magnification of very small geometries and long working distance objectives for ease of probing. Stability is very important at high magnifications, and the 6000 Series Test Station post provides the rigidity, X-Y translation(1" x 1" and planar movement required for the microscope. Not all features mentioned in Manufacturers Description are
Micromanipulator 8860 CV Inspection Station SemiAutomatic - robot and enclosure
Semi automatic analytical CV probing test station. Micromanipulator 8860. Light tight enclosure. Vibration isolation table. Robotic loading. Manuals. 3) objectives. 1) ocular. Camera. Computer control pendant. Cleaning station. Thermal chuck This item has high value pieces associated with it which will take expertise to utilize. It should be a great value for the proper user. SKU 49600 Item is available for local pick up or can ship via freight. There will be a packaging charge if the items ships freight. Please call 781 871 8868 to discuss any delivery arrangements. International Customers- We only take Paypal if you are verified. If not you must send a wire transfer and there is an additional $35 usd fee. Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. ... morePlease check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. PLEASE NOTE We are selling this item as pictured. Any parts or accessories not displayed in the photo are not included in this sale. Please review both the picture and description. Feel free to ask questions and request additional information prior to purchase. All sales are final. Thank you for visiting our BMI Surplus. Inc. Store
Kulicke and Soffa 3-Axis Micropositioner / Micromanipulator 3,046,006
Kulicke and Soffa 3-Axis Micropositioner/ Micromanipulator 3.046,006 A Kulicke and Soffa 3-Axis Micropositioner/ Micromanipulator. If one searches the Patent No. 3.046,006" on an internet search, a patent page will show further information about this item. Micrometers move and motion feels smooth on all axes. Please be aware that as we have multiple available the unit the winner will receive is unlikely to be the one shown. But will be in the same or better condition. Please take a look at all of the provided photos before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: Used- Untested. Micrometers move and motion feels smooth on all axes. No further testing was done. Return Policy: We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible ... morefor the cost of return shipping. Listed for M.C. by G.L. Located at: EB2-B-4 Shipping weight is 7lbs. 0oz, shipped from our warehouse in California. zip 90221) Default Shipping Service: UPS Ground California residents will be charged 9.00% sales tax. Tennessee residents will be charged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax to any shipment sent anywhere in either state. We accept the following methods of payment: For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care
2 Axis Probe Micromanipulator, Positioner
2 Axis Probe Micromanipulator. Positioner This unit does not have a brand label on it. I took some pictures of it from different angles:
Leica Leitz Mechanical Micromanipulator New Type Wetzlar refurbished Warranty
Leica Leitz Micromanipulator Complied Mechanical S/N 937769 Right side Can also be used on the Left the only change is the Corse and fine up and down movement turns clock wise. Refurbished by Seller a Leica Expert I worked for Leica/ Leitz 50 Years And have refurbished many units. I was the Service Manager for Leica. I will give you a 3 Month Warranty Made in Germany Leitz Wetzlar If you have a unit in need of refurbishing Please contact me and I will give you an estimate. Have for sale a right unit. Sold with a copy of the Instruction Book I will give you a 3 Months Warranty A new one will cost you $6000.00 to $ 8000.00 each Refurbishing at Leica will cost you $ 1400.00 without parts. I am offering superior precision. Mechanical Manipulators from Leica/ Leitz. Are Ideal for all medical and life science applications where micro surgical. ... morePhysiological and Intracellular recording Or chemical operations are performed on live organisms such as oocytes. Adherent cells, and plant cells. Typical applications include microinjection in adherent cells. Transgenic. IVF, ICSI, and work involving stem cells. Please ask any Questions Normal 0 false false false EN-US X-NONE X-NONE
MICROMANIPULATOR STAGE TEMPERATURE CONTROLLER MODEL HSM
MICROMANIPULATOR STAGE TEMPERATURE CONTROLLER MODEL HSM* Degree Centigrade* Purge. Heat, Soak& Cool Buttons* Interface Connector Sold as is/ Unable to test
NARISHIGE MICROMANIPULATOR MICROSCOPE MANIPULATOR POSITIONER
Hi All. I'm offering used but still working condition Narishige micro manipulator. I have no idea which model and used which microscope. Shipping cost is USA 16. Europe Countries 14USD. airmail, other countries please ask me before bid your shipping cost. Package will be send from Turkey. I can send the package world wide shipping. Winning bidder MUST contact me within 3 days of end of auction to verify shipping charges and FULL payment including shipping. I WILL NOT ACCEPT any cashiers check. I accept bank wire transfer(Add 19USD for bank fee) or PAYPAL. Please look at my feedbacks. Please request only genuine bidders apply.
NARISHIGE 1596 2 AXIS PROBE MICROMANIPULATOR MICROSCOPE MANIPULATOR POSITIONER
TESTING& COSMETIC NOTES: This is a USED WORKING item in VERY GOOD cosmetic condition that WAS PULLED FROM A WORKING ENVIRONMENT and is GUARANTEED WORKING COMPONENTS INCLUDED IN THIS AUCTION: 1) NARISHIGE 1596 2 AXIS PROBE MICROMANIPULATOR MICROSCOPE MANIPULATOR POSITIONER REPLACEMENT or MONEY BACK GUARANTEE: When you receive a Guaranteed item from OC Depot. It should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 14 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. Please Click Here and Read Our Sales Policies at" at" src="http:ocdepot.com/template/Rounded_Middle_Right.gif" at" src="http:ocdepot.com/template/Rounded_Left_Bottom.gif" at" ... moreat" src="http:ocdepot.com/template/Rounded_Middle_Bottom.gif" at" src="http:ocdepot.com/template/Rounded_Right_Bottom.gif" SearchBy9- 57736 | Location: E82 | Lister: Andy | Tester: TESTER NAME HERE' | Tech: | Quan: 1 | List: 1 | Duplicate: False | Plan: H- Q2 2 pounds w/Free Shipping | Amazon: Size: 0x0x0 Weight: 3 | Start: $0.00 | BIN: $299.96 | Type: Fixed Price | $hippingBump: $10 | Date: 5/7/2014 | Condition: Used Working | CONSIGNOR VIDE O | RESEARCH LINK | Created: 5/7/2014 | Business& Industrial Healthcare. Lab& Life Science Lab Equipment Analytical Instruments Powered by
NARISHIGE M0-203 THREE-AXIS HYDROLIC OIL MICROMANIPULATOR W/ COARSE MMN-1
NARISHIGE M0-203 THREE-AXIS HYDROLIC OIL MICROMANIPULATOR W/ COARSE MMN-1 Description Narishige M0-203 Three-Axis Hydrolic Oil Micromanipulator with MMN-1 Coarse Manipulator. Condition Tested. Works without a problem! Item is guaranteed NOT DOA! Buy with confidence and without the hassles of bidding! Payment must be received within 3 days of the end of the auction! Please follow the ebay checkout instructions for payment submission. Shipping in the US is $0.00. Except for HI, AK, and PR. We ship the same or next day of payment receipt! Buyer is responsible for all shipping costs associated with this transaction. Shipping costs are non-refundable! We do ship internationally. Please inquire for international shipping cost to your country. Powered by SixBit's eCommerce Solution
NARISHIGE M0-303 THREE-AXIS HYDRAULIC MICROMANIPULATOR W/MC-35A
NARISHIGE M0-303 THREE-AXIS HYDRAULIC MICROMANIPULATOR W/MC-35A Description Narishige M0-303 Three-Axis Hydraulic Micromanipulator with MC-35A. The listing includes everything as seen in the pictures. Condition The manipulator is tested and it works without a problem! Item is guaranteed NOT DOA! Buy with confidence and without the hassles of bidding! Payment must be received within 3 days of the end of the auction! Please follow the ebay checkout instructions for payment submission. Shipping in the US is $0.00. Except for HI, AK, and PR. We ship the same or next day of payment receipt! Buyer is responsible for all shipping costs associated with this transaction. Shipping costs are non-refundable! We do ship internationally. Please inquire for international shipping cost to your country. Powered by SixBit's eCommerce Solution:RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-146c5cbc5dd-0x118-
NARISHIGE MO-102R MICROMANIPULATOR
Thank you for visiting Wazobia Enterprise. We sell both new and used items. Most are surplus items previously used by local university hospitals. Private companies, government institutions and agencies. Customer satisfaction is our#1 priority. Please subscribe to our store for and great deals. Thank you for your time and business. NARISHIGE MO-102R MICROMANIPULATOR This item was removed from a working environment. Please feel free to ask question(s) if you have any. Thank you for your time and Business. 14 DAYS DOA GUARANTEE FOR FULL REFUND. Please check out the manual 1 for more information. Please visit our store(Click Here! for more laboratory and medical equipments that may meet your needs. Extra large items and items over 100lbs would require freight shipping. Please email me your shipping destination(commercial or residential) Zipcode, ... moreand if you require a lift gate or not for shipping quote. You can also request a pickup from your freight company if you have one. There would be a $75 pallet and packaging fee if pick up is requested. Fee would be waived if freight company would be packaging item on your behalf. Cost of shipping includes insurance. Packaging and handling fee. All items are professionally packaged and shipped. All pictures shown above are of actual product(s) sold. Please examine picture(s) carefully before bidding. Item(s) not shown in picture(s) or not stated to be included in auction will not be included in sale. Item(s) are sold-as-is as shown in pictures above. I do not warranty or provide calibration of any type unless otherwise stated. Warranty is only for 14 day DOA guarantee for full refund less shipping, buyer pays return shipping. Please visit my store for other great deals. Thank You For Your Time and Business Texas residents are subject to a 8.25% sales tax. USA Customers Items are shipped within two business days after payment is received. Items are shipped through USPS and UPS. Shipping price includes shipping and handling fees unless otherwise stated
THE MICROMANIPULATOR CO. Probe Station Model 6000 w/ Bausch & Lomb Eyepiece
WE ACCEPT PAYPAL AND ALL MAJOR CREDIT CARDS Customer Service: 818) 241-2265 DESCRIPTION The Micromanipulator Co. Probe Station_ DETAILS: Unfortunately we do not have the equipment to test it and for this reason. It is being SOLD AS IS. Please take a close look at our pictures near the bottom of the page for more details on the cosmetics of the item for sale. Thank you. SPECS: Model: 6000 Serial No. 71486 w/ Bausch& Lomb Eyepiece Overall dimensions: 36"x30"x30" Shipping: Due to the size and weight of the item. We are offering LOCAL PICK UP or FREIGHT SHIPPING- Please contact us via email for shipping estimates- We combine Shipping! Salesbaron is in Los Angeles. 90039 AT-LCW(226/L) PAYMENTS WE ACCEPT PAYPAL AND ALL MAJOR CREDIT CARDS Office Hours are Mon-Fri 9am-6pm and Saturdays from 9am-2pm Note: There will be a SALES TAX ... morecharge to buyers in California. If you have any questions regarding the CA State Tax please call us. SHIPPING Packages are usually shipped within 5-Days of payment receipt(excluding Saturday/Sunday) All orders are shipped via FedEx and USPS. International buyers. Please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. RETURNS We list and photograph every item we sell so you can feel confident when bidding. We only accept returns under certain circumstances with in 14 days of delivery. Shipping costs are non-refundable. ABOUT US Sales Baron is one of the fastest growing eBay consignment stores based in Los Angeles. CA, selling for clients across the country and shipping around the world. We specialize in selling various types of items including entertainmen
Narishige Micromanipulator (Model MO-03) - - For Parts ONLY
Narishige Micromanipulator(Model MO-03) For Parts ONLY(Does NOT Work) Part# 901-MISC We prefer PayPal Sales Tax(CA Only) Check out our eBay Store for other microscopy-related products@ GREAT prices!
M&M Micromanipulator HSM Stage Temperature Controller Digital Display PARTS
Search our eBay Store! M&M Micromanipulator HSM Stage Temperature Controller Digital Display PARTS SKU: JV-MAT-A-MICROMANIPHSM Condition: For parts or not working Packaging: OEM Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are only included if pictured or listed in description. If in doubt, please contact us before purchasing. Click an Image to Enlarge M&M Micromanipulator HSM Stage Temperature Controller Digital Display PARTS BEING SOLD AS-IS FOR PARTS OR REPAIR Model: HSM· Unit powers on with error message“Er3” Dimensions(L”xW”xH” 17.5*17*5.25 As a large liquidator for many vendors. Our rating system is as follows. On a scale from 1- 10. With 10 being in new or excellent condition, this item is rated as a 7. SEE PHOTOS. All ... moreimages taken in house of the unit(s) being sold. Except for multiple quantities where item received will be in similar or better condition. Please review images thoroughly before purchasing. Additional information may be found searching online. We do not have additional info. Only pictured items will be included. All parts. Including accessories and cables are only in cluded if pictured or listed in the description. All pictures are taken in house. If you require more information. Please contact the manufacturer and/or research online. As a large liquidator, we do not carry additional information beyond what has been provided to us above. This FDA DISCLAIMER is for MEDICAL DEVICES only and not for all our products: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. D0 N0T bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which
BURLEIGH PSC-5000 4 AXIS MICROMANIPULATOR + 2 CONTROL UNITS + POWER SUPPLY + SSH
1 BURLEIGH PSC-5000 4 AXIS MICROMANIPULATOR 2 CONTROL UNITS 1 POWER SUPPLY 1 PCS-500-SSH Steep/ Shallow Headstage Adapter Famous micromanipulator. For details see: http:www.olympusmexico.com.mx/spanish/seg/img/Catalog/seg_burleigh_pcs-5000_bro.pdf This sale comprises the 3 axis XYZ mechanical(25 mm travel) + piezo driver(150 microns) + 4th axis for oblique entering(25 mm mechanical travel + 50 microns travel on piezo) Each axis can be freely rotated to adjust the relative angle as well for the 4th axis. The micromanipulator includes also the very useful PCS-500-SSH Steep/ Shallow Headstage Adapter(pictures 3-4) see detailed description from same above link) It further simplifies pipette exchange even when the pipette is in the tightest places. Its symmetrical design offers these capabilities from both the right and left side of the microscope. ... moreIncluded also 2 PC503 axis control units(working fine- free from noise) and PCS-PS60 power supply for both control units. All mechanical parts travels smoothly. The instrument is free of stains. Rust, knocks. Handling- package free Happy bidding!
Micromanipulator Corp for S8 prober Heat Control H1001, Cooling C1000
Micromanipulator Corp for S8 prober Heat Control Module H1001. Cooling Module C1000, SN 921199, sell as is, see pictures for more details We describe the items and the condition as best as we can. If there are any questions or you need more info, please contact us and we will reply the same day. No other accessory are being sold with the item(Cables, manuals, Software, etc. unless it is mentioned in the description and shown in the picture. We do not have the capability to test these equipment. These are un-tested and we sell as is. see pictures for more detail. Farmon Inc. sell all equipment with no warranty expressed or implied regardless of condition. Farmon Inc. don’t have capability to verify this equipment. All sales are"As is and Where is" and are final with no returns or exchanges permitted. Farmon Inc. invites you to inspect ... moreproducts prior to purchase please email us at info@farmoninc.com or call us at 510-573-0047 to schedule a time. Please read our rules before buying our products. Buyer responsible for all shipping and handling costs. Including any applicable insurance, taxes, tariffs or duties. Buyer pays actual shipping charges using your UPS or FedEx account. There will be a $0 handling fee for US and $0 for international for this item. Please allow 5 business days for us to ship after payment is received! All Buyers are welcome to come and inspection the equipment before purchasing them. Please email or contact us. Buyer must sign shipping confirmation when item delivered. All sales are Final and No return are Accepted. We are also interested to buy your unwanted excess inventory. Please call us to review and remove your inventory. We can sometimes do in the same day. Brand we can support. Please check our inventory: We supply many other semiconductor components. Equipment, RF Generator, Chiller, Turbo, Cryo pumps, MFC, Vacuum pumps and controllers, step motors and drivers, etc. Entran Entrelec Schiele Equipe PRI Equipe Technologies Erecta ESA ESC Estek ETA ETEC Systems ETEL ETO Ehrho
MICROMANIPULATOR / KINETIC SYSTEMS 7000-LTE
MICROMANIPULATOR/ KINETIC SYSTEMS 7000-LTE Inventory# 58236*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Dark Box with Kinetic Systems Vibration Isolation Table for Wafer Probers. Roll top door. Inside Dimensions: 35.5 inches Deep x 34 inches Wide x 31 inches High. The interior of the box has a 24 inch x 30 inch. Four legged prober platform that sits directly upon the vibration isolation table. This arrangement allows the exterior dark box to remain stable while the prober(not included) floats on the isolation top. Wafer prober not included in the sale. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please ... morecontact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
MICROMANIPULATOR DARK BOX for WAFER PROBERS
MICROMANIPULATOR DARK BOX Inventory# 54252*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Dark Box for Micromanipulator Probers. Box fits over top of prober. Bottom opening: 22 inches x 15 inches. Side doors for probe adjustment. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to ... morediscuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
MICROMANIPULATOR 7000-LTE DARK BOX for WAFER PROBERS
MICROMANIPULATOR 7000-LTE Inventory# 58321*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Light Tight Enclosure Dark Box for Wafer Probers. Roll top door. Inside Dimensions: 35.5 inches Deep x 34 inches Wide x 31 inches High. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss ... moresuitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
MICROMANIPULATOR 6640 200mm WAFER PROBER BASE
MICROMANIPULATOR 6640 Inventory# 58351*Item sold"as-is" condition. Not refurbished. 200mm Wafer Prober Base. System sold in"As Is" condition. Parts missing. No computer or microscope. 200mm Temptonics temperature chuck. But no controller. Sold in untested as-is condition. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value ... morefor our customers.
Micromanipulator 6000 Manual 100mm High Resolution Wafer Prober
Micromanipulator 6000 Manual 100mm High Resolution Wafer Prober Inventory# 58985*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. High resolution substrate probe station. 4 in. dia. chuck. 4 in. x 4 in. XY movement. Theta rotation. Platen accepts vacuum or magnetic base probe manipulators. Platen fast lift. Wild Stereo microscope. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs ... moreof the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
Micromanipulator Company Model 6000 Bausch and Lomb
Micromanipulator Company Model 6000 Bausch and Lomb
EG&G Micromanipulator Co Model 410 C-V Plotter Machine; Used, For Parts; No Cord
I have One EG& G The Manipulator Co. Model 410 C-V Plotter Machine. It was Made in USA and is used. The casing looks good. But has some sticky residue on one area of the top surface. All of the knobs and the dial on front are intact, as well as the ports and switches on the back. The cord has been cut off, so it has not been tested, and is being sold as is. Please look at my photos. Thank you for your bids. US bidders only please.
Micromanipulator prober 6200, 6", Free Ship/Install, Mitutoyo , 90 Day Warrarnty
Free US installation. US Wide! Or install yourself for credit toward purchase. This machine is fully refurbished with new belts. Refurbished stage, microscope transport and lift mechanisms are all rebuilt to original factor condition. University Discount is Available Comes with everything shown in the pictures: 1. High power Mitutoyo FS microscope with 2x. 10x, 20x objectives and 10x eye pieces 2. QTY 4 positioners 4. QTY 4 probe holders(not shown in the pictures) with set screw or pin jack to hold probe tips 5. 2 boxes of probe tips(as shown) 6. Illuminator for microscope with fiber optics as shown in the picture 7. Gold chuck 6" If you need a formal quote. Send us an email. Shipping is Free US wide. Free USA installation and warranty 90 days if we install. Extended warranty available. Extended Warranty Contact for quote for installation. ... moreInternational shipping contact for quote.
Micromanipulator Prober Model 6000 4" , Refurbished with Warranty Probe Station
Fully Refurbished(new belts. Serviced, planarized, aligned stage) Micromanipulator 4" system Microscope: B&L Microscope with 3 objectives(2X. 8X, 25X) and 10X eyepieces. Other microscope options is available please. Also included are 4 probes with probe arms(not shown in the picture) and a Box of 10 probe tips(Model Micromanipulator 7X. 0.35um probe tip size) You will start testing right away with this fully configured machine. Installation: Available and is free within the Silicon Valley. Complete installation instruction for other locations or we can install, ask for quote. Warranty: 90 days if we do the installation. Extended warranty is available please ask for quote. Shipping& Handling is Free US Wide If you need a formal quote. Send us an email.
Manual Micromanipulator Stereotaxic XYZ Movement- Vernier Scale- Made in Germany
Manual Micromanipulator Stereotaxic XYZ Movement- Vernier Scale- Precision NICE! Made in Germany. Used and fully functional micromanipulator. This precision instrument was used in conjunction with a Nikon microscope and has been stored for a while. Shows some very minor cosmetic rust spots on steel screw heads but not on critical areas. Can use some fresh grease but it works very smoothly. Complete with functional magnetic base. Stainless L shaped support and aluminum extension. The metal lable on the base needs a touch of glue. Unsure of the Manufacturer. The mark shown is an M over a W. Looks identical to World Precision Instruments model M3310R Total weight over 4 pounds. Will ship priority mail. Last one I have to sell. Thanks for looking!
Rucker & Kolls 329-1 XYZ Micromanipulator, Micropositioner Probe, Used
Rucker& Kolls 329-1 XYZ Micromanipulator. Micropositioner Probe, Used Description: Used Rucker& Kolls 329-1 XYZ Test Positioner. Micromanipulator, Micropositioner. Good Condition, minor scratches on magnetic base. Axes: XYZ Thumbscrew adjustment Magnetic base
Probes *Lot of 13* for Parts- Wentworth, Micromanipulator (LOC-D2)
This auction is for(13) probes or probe parts. This lot consists of Wentworth. Micromanipulator and Picoprobe parts. These items are for parts and are sold as is. Customer Service: 805) 658-1331 Payment Instructions: Purchases can be paid trough Paypal. VISA, MASTERCARD or AMEX. International Payment: Paypal Sales Tax: California residents must pay state sale tax Shipping: Buyer Pays Shipping. Shipping estimates are available prior to placing a bid if you email us your shipping destination. Shipping charges include packing and insurance Warranties or Returns: No warranties are expressed or implied. Items that are supposed to be operational according to the listing can be returned if they are D.O.D. Items that are untested or are sold as-is cannot be returned. Additional Terms:Payment must be made within ten days of the auction close date. ... morePlease visit our Store for additional items
MICROMANIPULATOR INKER MODEL CC1-1
MICROMANIPULATOR INKER CC1-1* Interface* 1 Amp Sold as is/ Unable to test
Patch Clamp Driver with Micromanipulator for Microscopy
Patch Clamp Driver with Micromanipulator for Microscopy. This is Patch Clamp Driver Model PCS-250. Made by Burleigh. Ser# N5409740. Come with a three-dimensional micromanipulator, Newport 423 Series, Base Newport 360-90. The microscrews are Mitutoyo, Japan. Two moves well, one is a bit tight, needs lubrication. I don't know how this works, there is a three dimensional controller(mouse" with wheels which comes with a manipulator. There are two cables going from micromanipulator mouse into the Patch-Clamp Driver. All together quite heavy. SOLD as FOUND. NO RETURN ON THIS ITEM! Responsibility for using this item rests entirely with you. I do combine shipments. Handling fee is always $1.00 or 13% of shipping cost whatever is greater. Per non-book listing and $0.50 or 13% of shipping cost, per book listing. Overseas shipments– by INTERNATIONAL ... morePRIORITY ONLY(unless there is a special request for FedEx) Returns and complaints are accepted within 5 days after receipt of the merchandise. Please, don’t bother after that. Returns(pre-notified within 5 days) are accepted up to 14 days for a full refund. The return shipment is paid by a buyer. ALSO. IF YOU ARE PLANNING TO BID ON OTHER AUCTIONS FROM MY LISTINGS, PLEASE, LET ME KNOW ASAP, OR EVEN IN ADVANCE, SO I WILL BE ABLE TO MAKE A CONSOLIDATED SHIPMENT FOR YOU. IF I DON’T HEAR FROM YOU I WILL ASSUME THAT YOU ARE DONE WITH AN AUCTION AND WILL PACK THE ITEM. THEN THE CONSOLIDATION WILL BE MORE DIFFICULT OR NOT POSSIBLE. NOTE: THE SHIPMENT WILL BE CONSOLIDATED ONLY IF THE PURCHASE WAS MADE WITHIN 1(ONE) MONTH(due to E-bay INVOICING SYSTEM) Thank you for looking! SHIPPING Policy(Please. Read carefully) Shipping and Handling charges are the most controversial issues of all e-bay transactions. Probably there are as many opinions as there are E-Bay members. My policy is the following: The Shipping cost provided in the listing is APPROXIMATE. I do charge handling fee which is $1.00 or 13% of shipping cost. Whatever is greater per non-book auction and $0.50 or 13% of s
SHARPLAN MICROSLAD 719 MICROMANIPULATOR CO2 LASER
We have a lightly used Sharplan Microslad 719 micro manipulator for sale. We have attemted to supply the best quality photos to show how pristine the optics are on this piece. This is a used piece and the optics are not perfect however they are the best we have seen on a used Microslad. There are no major scratches or blemishes. Notice how none of the other Ebay sellers show their optics up close. You know why. The joystick and spot size selector move smoothly and freely as if they were new. The Microslad, 300& 400 lenses are included. You will not be disappointed with this micro manipulator. It does not have a wooden box but will be professionally packaged prior to shipment. It will ship USPS Priority Mail for free within 2 business days of the cleared PayPal transaction. If you need it quicker, let us know and we can work something ... moreout. All serious offers will be considered.
Eppendorf Micromanipulator 5170 model: 5170
Technology Recovery Service We welcome all new customers and all returning customers to our site. Eppendorf Micromanipulator 5170 model: 5170 Condition: I am only selling this unit as-is due to the fact I have no experience in the field of equipment and I have no way to test it for its fuctionality. I am not in this field of equipment. We are an asset recovery company that deals with off lease electronics and warehouse liquidations/ autions. We have not tested this item for any functions other then to power on. This item may work fine when you receive it. or may require some minor repairs/ adjustment. or may just be good for parts. Compatibility: Please check prior to purchasing We did perform a visual inspection on this unit and all connections appear to be intact and the unit has been tested positive for its power ability If you happen ... moreto to have an issue with an item. such as missing parts or pieces that are mentioned as being present or shown in the pictures as being present and that are not included in your order please contact us direct. In case of an order discrepancy and to save you and I both time and to avoid eBay's lengthy resolution process please contact us direct and I will get back with you either that day or the next BUSINESS day to help resolve any order issue in a quick and timely fashion. PLEASE READ OUR SHIPPING& RETURN POLICY COMPLETELY BEFORE PURCHASING FROM US. If you have any questions about this item. Please email us prior to purchase, otherwise buyer holds all responsibility What you see in these photos is what will be shipped to you unless otherwise stated. Please do not assume something to be present thats not shown in the pictures. Please note: If this auction is for a laptop or desktop we must inform you that any and all of our laptops and desktops do not include hard drive or drive carriers/ drive adaptors. These items are removed by the previous owners for security purposes I will describe how we list items and process DOA returns so that everything is clear.
Sutter MP-285 XYZ motorized micromanipulator - submicron resolution
This listing includes the controller. The 3 axis motorized stage, and the Rotary Optical Encoder input device. From the manufacturer: Travel. 1 inch | 25 mm on all three axes. Resolution. Low: 0.2um/step. High: 0.04um/step. Maximum Speed. 2.9mm/sec. FEATURES. Highly stable for experiments intolerant of pipette drift. Submicron resolution and integrated coarse positioning. 1 inch of motorized travel on all three axes. 4th axis with user-selected angle for axial drive. Adjustable speed and resolution allows optimization for your experimental setup. Programmable robotics for complex motion sequences. Continuous display(in microns) of axes positions. Switch between continuous or single step movement. Absolute and relative origins. Convenient Home function allows pipettes to be quickly repositioned. Assignable axes permit any orientation of the ... moremanipulator. Easy to read vacuum fluorescent display. Remote computer control via serial interface. Compact design easily adaptable to your setup. Universal mounting system for headstage or pipette holder.
CASCADE MICROTECH MPH 4 AXIS PROBE POSITIONER MICROMANIPULATOR #3
~ ~ Click to enlarge images ~ ~ DESCRIPTIONS Make: Cascade Microtech Model: MPH SN: IM30085 Physical: Near New Operational: Fully functional Package includes: 1) 4 Asix MicroPositioner with Magnetic Base SHIPPING Domestic: FREE UPS/FedEx Ground. Hawaii and Alaska pay extra. International: Email for quote. WARRANTY 7 calendar days upon arrival PAYMENT eCheck Paypal Please contact us for other options*California buyers pay sales tax unless a resale exemption certificate is provided. GENERAL POLICIES Buyer pay shipping costs for returning the products. All returned items must be the same condition as shipped in order to receive a refund. International buyers held responsible for all import/ export duty fees. Payment must be made within seven(7) days of auction's end. Copyright © Moni-Comp Tech 3. All Rights Reserved.
Narishige MO103 Hydraulic Micromanipulator MPN8411: CONTACT SELLER TO MAKE OFFER
Narishige MO-103. 3-dimensional hydraulic micromanipulator. Used, in good working order. Free shipping within the continental US. Shipping insurance included. Returns accepted within 30 days of receipt. CONTACT SELLER TO MAKE OFFER.
Coherent M40 Micromanipulator - Fits Coherent/Lumenis Arms - LASER OPTICS
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Coherent M40 Micromanipulator- Fits Coherent/Lumenis Arms- LASER OPTICS Coherent M40 Micromanipulator- LASER OPTICS Variable Spotsize. Fits Coherent/Lumenis Arms This came out of a local lab in my area that shut down. The device looks to be in like new condition. Overall. I really don't know too much about it. It came from a lab that ran a plethora of tests with LASERS. PLEASE inspect all the pictures on this page. You are bidding on the EXACT unit pictured on this page. THANKS For having a look. Except for what is shown in the photos. This item does not include any other documentation, accessories, cables or software unless stated. Images are of the item we are selling unless otherwise noted. Shipping Cost: This will be shipped by UPS ground as soon as payment is received. ... moreThe buyer pays the actual Shipping Rate: UPS Ground/ Insured(USA only) International bidders contact us for shipping rate International customers are responsible for any and all customs or duty fees charged upon receipt in your country. Those fees are not included in this sale. Shipped vis USPS) ALL INTERNATIONAL SALES ARE SOLD AS IS I have a huge assortment of Optical Parts& Equipment listed on Ebay and in My Ebay Store. Items have a 10-Day Warranty from the day you obtain them. If for some reason the item does not work properly or is different from the listing description- then we will accept a return on the item and provide a refund or exchange. Original shipping paid to obtain the item is non-refundable) However. If you buy an item by mistake or you buy a working item& you realize that you simply don't want or need it- there will be a 20% restocking fee. So please research the item you are buying and asks us questions. Payment Methods: For domestic payments we accept most major credit cards(Visa. Amex, and Mastercard) We accept Pay Pal Payments for varified shipping address.This is our preferred method of payment) For International sales- Bank Wi
MicroManipulator 6000 B & L Inspection Microscope
MicroManipulator Mitutoyo Inspection Microscope w/ Micropositioners Illuminator Although we welcome your questions and inquiries by e-mail or phone. Bidders are expected to do their own research in regard to the compatibility and/or software/driver requirements for any item they are considering purchasing. In most cases. All information that we have available to us is included in the text of the auction. MicroManipulator Mitutoyo Inspection Microscope w/ Micropositioners Illuminator Accessories included: Bausch& Lomb Microscope no eyepieces or objectives Used. Seems in good mechanical condition(knobs are functional) untested any further, sold AS-IS for parts or repair. Condition Used, Warranty Sold As Is. No Warranty. This item is sold"As-Is" with no warranty. And will not be considered for either refund or exchange. This is ... morean"All Sales Final" item. Domestic Shipping Information System has a palleted weight of 130 LBS. and will need to be freighted to its destination or is available for local pickup by appointment. Please call or email for shipping quotes or shipping arrangements can be made by the auctions winner. International Shipping Not available for this item. Payment Payment can be made by PayPal. Visa, Mastercard and Discover. 8.0% Sales tax applies to items shipped within California. Contact Information Send questions through the eBay email system. Or call(714) 523-2425 8am- 4pm Pacific M-F. We are located in Anaheim. CA. View our other Items for Sale on Auction We accept Visa. Mastercard and Discover Powered by The free listing tool. List your items fast and easy and manage your active items.
Micromanipulator Model 110 Probe Positioner
This is a model 110 Micro Manipulator made by The MicroManipulator Company Inc. It appears to be in a great condition if ever even used. I don't really know what this does or if it functions but it appears to all be here and in perfect condition. Sold AS IS since I don't know what it is or how to test it Any questions feel free to ask and I will do my best to answer them for you
MICROMANIPULATOR MODEL 110 PROBE X-Y-Z AXIS POSITIONER VACUUM BASE
MICROMANIPULATOR MODEL 110 PROBE X-Y-Z AXIS POSITIONER VACUUM BASE Up for bid is a MICROMANIPULATOR MODEL 110. This is a PROBE POSITIONER with a VACUUM BASE. It looks to be in EXCELLENT condition. EXCEPTION is a missing O-Ring for the base to seal to the table. All controls move freely. X-Y-Z AXIS. USPS PRIORITY MAIL My Policies: TERMS PAYMENT DUE WITHIN 8 DAYS OF AUCTION CLOSE PA RESIDENTS MUST PAY SALES TAX We take Pay-Pal payments& other forms of ebay approved& NON APPROVED payments. We do not take credit cards directly- only thru PayPal. We only ship by UPS. USPS or TRUCK& have UPS daily pickup. Payment received by Noon will usually ship(UPS or USPS) same day- otherwise next business day. Truck shipments will ship within 2-3 business days. You are buying only what is shown in the pictures unless otherwise stated in the description! ... moreAny currency or coins shown in pictures are for size reference only and are not included in the auction. UPS/ TRUCK SHIPPING INSTRUCTIONS Any above shipping instructions(like truck shipping) take precedence over these UPS instructions Buyer pays shipping costs as shown by the eBay shipping calculator Shipping will be by UPS or USPS ONLY unless truck shipping applies-Cost can be checked by entering your zip code in the eBay shipping calculator-If calculator will not work for your zip or the item is truck ship only then it is the buyers responsibility to contact me for a shipping quote before bidding! ABSOLUTELY NO FEDX- NO COD OR SHIPPING ON ANOTHERS ACCOUNT# If you are a Canada buyer or the item is truck ship We MUST have your phone# for the shipping paper work before We can ship. We use a SEALED AIR FOAM PACK SYSTEM& pack most larger items in expanding foam packing to insure undamaged shipping. CANADA BUYERS Due to MANY-MANY problems with Canada buyers not being aware of customs duties and UPS broker fees + other costs we currently will not allow you to bid unless you contact us FIRST and verify that you are aware of all costs and will not hold us liable for ANY ad
Coherent Laser M40 Microscope Micromanipulator
Coherent M40 Micromanipulator. Serial 256. Includes unit with various extras as shown. Its recommended that all medical items are checked out by qualified personnel before use. certification and/or calibration unknown. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an unauthorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item" Millmedlabequip. Saskatoon, SK.306)717-5651. Posted with
MicroManipulator Probe Contact Sensing Module PCS-4
MicroManipulator Probe Contact Sensing Module PCS-4 JR8-2. 1. No warranty. If you have any questions regarding this item. Please contact me_before_ bidding. S/H in continental USA. Expedited shipping can be arranged upon request. Other Notes of Interest Shipments: All items will ship within 1-2 business days of payment receipt. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-147fcec7690-0x10a-
MicroManipulator RSC-6-LN X-Y-Z Drive control for 8860
MicroManipulator RSC-6-LN X-Y-Z Drive control for 8860 JR8-2. 1. No warranty. If you have any questions regarding this item. Please contact me_before_ bidding. S/H in continental USA. Expedited shipping can be arranged upon request. Other Notes of Interest Shipments: All items will ship within 1-2 business days of payment receipt.
LASER INDUSTRIES SHARPLAN ACUSPOT 710 MICROMANIPULATOR
This is the 710 acuspot which allows you to achieve a much smaller spot size than with the regular 719 microslad. The optics of this unit are in excellent condition and has only been used as a demo. Kit includes: 710 Acuspot. 400mm objective lens for older Zeiss scopes. Locking ring. Handrest. Adjustment tools. Case. Shipping to the lower 48 United States only.
NIKON DIAPHOT HOFFMAN MODULATION CONTRAST RESEARCH MICROSCOPE W/MICROMANIPULATOR
| NIKON DIAPHOT HOFFMAN MODULATION CONTRAST RESEARCH MICROSCOPE W/MICROMANIPULATOR, Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album Click to View Image Album NIKON DIAPHOT-TMD INVERTED HOFFMAN MODULATION CONTRAST BINOCULAR RESEARCH MICROSCOPE + MICROMANIPULATOR + PRINTED OPERATING INSTRUCTIONS You are invited to purchase a very nice Nikon Diaphot-TMD Inverted Hoffman Modulation Contrast(HMC) Binocular Research Microscope that is set up for brightfield and Hoffman Modulation Contrast(HMC) microscopy along ... morewith modern digital imaging. This microscope is also equipped with a working Narishige Model MMO-203 Three-axis Hydraulic Oil operated Micromanipulator. A set of printed operating instructions for both the microscope and the HMC system along with data sheets on the micromanipulator completes this nice research microscope package. The Hoffman Modulation Contrast(HMC) optical system produces high contrast and high resolution images of transparent specimens such as live tissue cells. Live bacteria& Protozoa, etc. The images have a 3-dimensional appearance wherein a rounded object appears dark on one side, bright on the other, with grey in between, against a grey background. Additional features are optical sectioning, directional sensitivity, high resolution and control of contrast and coherence. Images are similar to and in some cases even superior in appearance to those produced by Differential Interference Contrast(DIC) Although Nikon first introduced this model inverted microscope in the mid-1980s when 35mm film photography was still in vogue. The design of the Diaphot-TMD now nicely lends itself to modern digital imaging with DSLR cameras, digital video cameras or CCD c
DANTEC Micromanipulator Type 55A13 Weld station with Type 55A12 Power Generator
For sale DANTEC Micromanipulator Type 55A13 Weld station with Type 55A12 Power Generator. unit is used. clean good condition,
XYZ Stage, 110 Micromanipulator, Micropositioner, Positioner for Probing (Used)
3 Dimensional Control Work Smooth.