|
|
Order by: Available to: eBay Affiliate Links
|
Condition: Used Location: Charlotte, United States You Are Bidding On a USED: BESELER 1611-C SHRINKWRAPPING UNIT L-BAR HEAT& TUNNEL SHRINK PACKAGING HEAT SEAL SYSTEM Serial Number: 02920206 This machine ... moreis used but in great working condition. It has been tested by our technicians and is complete. SHIPPING/FREIGHT ARRANGEMENTS AND PAYMENT ARE TO BE MADE BY THE PURCHASER OF THIS MACHINE. ONCE PAYMENT IS PROVIDED IN FULL YOU WILL RECEIVE SHIPPING LOCATION/DIMENSIONS/WEIGHT. THERE WILL BE A $50 PALLETIZATION FEE ASSOCIATED WITH THIS ITEM. WILL LOAD ONTO TRUCK FREE OF CHARGE* Specs: L BAR TOP SEALER Happy bidding Terms for this eBay listing for: printing-bindery-equipment How to Contact Us: Email: printingbindery@live.com We try to answer emails daily. Feedback policy: Please leave positive feedback once the transaction is complete if everything in our auction is as described and we will do the same. If anything is other than as described in our auction listing. Please contact us as via email as soon as possible so we can review the issue and come to an agreement to resolve the matter prior to leaving poor feedback. We aim to please and will do our best to represent our items the best we can. Arrange an Inspection: Please contact us via email with your name and phone number so we can get an inspection scheduled on an item if you choose to. Inspections must be done prior to the end of the auctioned item. All Sales are Final. The item will be shipped in the condition as photographed and shown in the listing. All items are sold“AS-IS” and“WHERE IS” The Buyer assumes the Full Risk of Shipping/ Freight. All items are shipped FOB Kewaskum. WI 53040. We are not responsible for the item once it is removed from our location. IT IS THE BUYERS RESPONSIBILITY TO REQUEST AND PAY FOR ANY INSURANCE. INCLUDING SHIPPING/FREIGHT INSURANCE! All transaction are agreed to have taken place at Kewaskum. WI 53040 and are governed by the laws of WI. You are bidding on the item(s) photographed in this listing and as detailed in description. The buyer is not to infer or assume
Condition: Used Location: Barto, United States Heat Shrink "L" Sealer, Excelent condition. One owner, still in use. All manuals included. Auto-Hold and Auto-Feed.
Free Shipping Condition: Used Location: Sun Valley, United States
Buy It Now
Condition: Used Location: Glassboro, United States Small orders are no problem. Your Best Work Starts Here™. Be sure to add us to yourfavorites list !
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States Similar to the Shanklin N06-0532-001, they are 1" long but only have one groove on the narrow side. Also labelled as S4016, S0048, 140031.
Buy It Now
$10.00 Shipping Condition: New Location: Monroe, United States One set of two Shanklin belts part number SPA-0011-001.
Buy It Now
$10.00 Shipping Condition: New Location: Monroe, United States One set of two Shanklin belts part number SPA-0009-001.
Buy It Now
Condition: Used Location: Rochester, United States Make: Beseler. Type: Heat Shrink Tunnel. Electric: 220V, 60 Hz, Single Phase. Tunnel Size: 16" W x 10" H.
Buy It Now
$300.00 Shipping Condition: Used Location: Palm Coast, United States It is designed to provide a secure and tight seal for products of various sizes and shapes. The machine is in excellent working order and ready for use. ... moreItem sold it working condition. Must show proof of not working to escalate any issues.
Buy It Now
$10.00 Shipping Condition: New Location: Monroe, United States One set of two Shanklin belts part number SPA-0010-001.
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States
Buy It Now
Condition: Used Location: New Brunswick, United States We have shrink tunnels also. Kevin may need to get you a proper class based on what you are buying. Be sure to add us to your favorites list! Location ... moreAisle Q6H1. Loaded for free and available for your local pickup!
Buy It Now
Condition: Used Location: Rochester, United States Make: Beseler. Type: Heat Shrink Tunnel. Electric: 220V, 60 Hz, Single Phase. Tunnel Size: 16" W x 8" H. Get images that. make Supersized seem small.
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States
Buy It Now
$10.00 Shipping Condition: New Location: Monroe, United States Lot of 7 Texwrap 50-00528 Side Seal back Up Rings.
Buy It Now
$15.00 Shipping Condition: Seller refurbished Location: Monroe, United States One lot of Texwrap Side Seal Blades, includes these three part numbers: (3) 80-RS008 narrow seal, (2) 80-RS009 cutting, (1) 80-RS053 xtra wide seal. All ... moreexcept 80-RS053 has been re-coated with black ceramic Teflon and should be good to install.
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States S0063, S-0063.
Buy It Now
$10.00 Shipping Condition: New – Open box Location: Monroe, United States One lot of new & used air punch parts to fit Park Air models - see photos.
Buy It Now
$10.00 Shipping Condition: New Location: Monroe, United States
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States
Buy It Now
Condition: Used Location: Apollo, United States Mfg: Beseler. Tunnel Size: 21"W x 12"H x 51 1/2".
Buy It Now
$10.00 Shipping Condition: New Location: Monroe, United States
Buy It Now
$10.00 Shipping Condition: New Location: Monroe, United States My guess it is 1/4-1/2 hard, it could be used for other heating/cutting purposes.
Buy It Now
Condition: Used Location: Apollo, United States Mfg: Beseler. Tunnel Size: 21"W x 9"H x 51 1/2"L.
Buy It Now
$10.00 Shipping Condition: New Location: Monroe, United States Two Texwrap extra heavy duty film clamp springs part number: 70-07709-EH.
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States One new Conflex Sealing Hub 660-115-511 for Fusion Sealers. Two available, see photos of exact item(s).
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States One bag of 20 pieces, HeatSeal Standoffs with screws part number 6108004.
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States One new Conflex Rotary Seal Heater 660-303-065 for Fusion Sealers. See photos of exact item listed.
Buy It Now
$35.00 Shipping Condition: New Location: Monroe, United States One new in box: ED-0063 (S4400 056C17F15548) Blower Motor for Shanklin Shrink Tunnels. Made by Marathon Electric in USA, date code 07/10/19. See photos ... moreof item, box only opened to show item.
Buy It Now
$10.00 Shipping Condition: New – Open box Location: Monroe, United States Misc lot of parts for Vertrod 14" Sealers. One piece. 018" x 59" Long TFE coated cut wire, Seven pieces 14" Long with ends (one wire is missing end), ... moreTwo sealing ribbons. 004" x 1/8" x 14" Long, Two sealing ribbons. 004" x 3/16" x 14" Long, Three silicone pads 5/16" x 3/8" x 15" Long.
Buy It Now
$10.00 Shipping Condition: New – Open box Location: Monroe, United States
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States 220V 100W 3/8" od x 1" long with 12" long SS overbraid (14" oal wire). See photos of exact item listed.
Buy It Now
Free Shipping Condition: New Location: Monroe, United States 9 pcs New sealing ribbons for Vertrod type sealers, part number H311-4183.
Buy It Now
$10.00 Shipping Condition: New Location: Monroe, United States One new Texwrap film mizer wheel assy (bearings included).
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States The machine models were LBC24 and SCA16. There are 5 wires and 1 rubber pad for the LBC-24 model and 9 wires for the SCA-16 model. I believe the seal ... morepad could be cut down to size to fit the the smaller SCA-16.
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States One sealing ribbon for Vertrod type sealers, part number H311-4097.
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States
Buy It Now
$5.00 Shipping Condition: New Location: Monroe, United States Two sealing ribbons for Vertrod type sealers, part number H311-4096.
Buy It Now
Condition: Used Location: Oxnard, United States
Buy It Now
Condition: Used Location: Denton, United States 115V, 20A, Single Phase. Shrink Film L-Bar Sealer. We prefer local pickup, but we can also band this unit to a pallet, or crate the machine for LTL. Couldn't ... morefind what you were looking for, Check out our other item!
Buy It Now
Condition: Used Location: Elkhorn, United States HELLO WHAT YOU ARE LOOKING AT IS A SHRIIK TUNNEL THAT IS IS A BESELER MODLE T-16-8 THIS IS SOLD AS IS THIS HAS A EXTRA TRAY THATS FITS AT THE END THIS ... moreIS 115V 60 HZ 20 AMP IT IS A 2-PES SYSTEM THE FRIST PEICE IS 58X40X24 THE OTHER IS 30X53 TALL THE TRYA IS 20X28 ANY QUESTIONS PLEASE ASK THANKS MALCOLM PS IF QUOTE TO HIGH PLEASE LET ME KNOW WILL FIND OTHER
Buy It Now
Condition: Used Location: Massena, United States
Buy It Now
Condition: Used Location: Lodi, United States Bestronics(Beseler) heat shrink tunnel model T-15-9 serial# 1072763 electric 220 vac 1ph 50 amp 12 inch wide nomex conveyor belt in perfect condition ... moreoverall size 48 inch high X 25 inch wide X 80 inch long 400# Unit has new digital temperature control and has been tested. FOR LOCAL PICKUP ONLY.
|
|
|
|
Beseler T-15-9 Shrink Tunnel and 2220-GSM Sealer
Beseler T-15-9 Shrink Tunnel/ Beseler Model 2220-GSM This unit has very little use and is in perfect working condition. You will not be disappointed. We can arrange for very economical shipping anywhere in the US. Please contact me for shipping quote. We also have several Baum collators and booklet makers for sale. Please email with any questions. Please feel free to call. 724-867-6083 ask for Jim
|
|
|
Beseler Mini Shrink Tunnel Model #T14_8
Working Shrink Tunnel overall dimensions are 23 x 20 3/8 x 33 1/2. Opening dimensions are 14 1/4 x 8. This will be a local pickup only as it is a heavy item.
|
|
|
BESELER 18" SHRINK WRAP HIGH SPEED TUNNEL AUTO TAKE OFF SEALER SAVE $$$$$$$
areTrade © AP6 LOOKING FOR A HIGH VOLUME SHRINK WRAP SYSTEM? CHECK OUT THIS BESELER SYSTEM! COMPARE PRICE OF $11.000.00 for NEW SYSTEM Save $$$$$$$ AVOID BUYING MACHINES THAT MAY OR MAY NOT OPERATE PROPERLY! THIS SHRINK WRAP IS INSPECTED BY A SERVICE TECHNICIAN AND WILL BE TEST RUN FOR THE BUYER PRIOR TO SHIPPING. FREE OPERATOR TRAINING PROVIDED ON OUR FLOOR PRIOR TO SHIPPING. CALL US ANY TIME! PHONE: 1-352-799-8393 Visit us On Line at Lcegraphics.com CLICK BELOW TO WATCH OUR YouTube VIDEOS OF THIS BESELER SYSTEM! BESELER SYSTEM FEATURES SYSTEM FEATURES: Overview 15-18 packages per minute Maximum package size 19" L x 15" W x 8" H One year warrantee on parts- including wire Electrical Specifications Sealer: 120 V/ 1 phase/ 60 Hz/ 15 Amps- Tunnel: 220V/ 1 phase/ 60 Hz/ 50 Amps- Sealer Specifications Seal area 20" L ... morex 16" W Poly film high speed mode Self adjusting pad Precision machine head seal Magnetic hold down Fully welded 11 gauge steel frame Adjustable film tension break Quick change seal wires Micro perforator Automatic seal wire temperature compensator High-Performance& Durability Beseler Quality Construction Energy Efficient Circuitry Low Maintenance Made in USA An excellent value at only $6.975.00 OR BEST OFFER! T unnel Specifications Opening 18"W x 8"H Tunnel chamber size 16"W x 36"L x 8"H Flow through heat shrink No maintenance mesh belt Auto temperature controller 0 to 120 fpm conveyor speED* FOR PDF BROCHURE OF THIS SYSTEM GO TO Lcegraphics.com* UNIT CAN BE INSPECTED PRIOR TO PURCHASE We can install world wide. Please call for installation quote ANY QUESTIONS? 1-352-799-8393 NOTE: THIS ITEM WILL BE TESTED AND DEMONSTRATED FOR THE BUYER ALL EQUIPMENT IS SOLD AS IS. AS IT APPEARS IN THE LISTING Domestic Shipping: P LEASE SEND CITY AND ZIP FOR SHIPPING QUOTE. International Shipping: We ship internationally through Either Koch Logistics Maritime or Atlas Vanlines. For shipping to the UK and Europe we use UPS for under 150lbs and Koch Logistics for
|
|
|
Bestronic BESELER Model T-14-8-D Heat Shrink Wrap Tunnel Conveyor Package Sealer
Bestronic Beseler Model T-14-8-D Mini Heat Shrink Tunnel Model# T14-8 Serial# 985817 Used by Home Crafter in immaculate shop/setting. I have inspected it and it works perfectly. Owner wants to sell since no longer needed. This is the tunnel only. does not include sealer. Email/Call with any questions or to set an appointment for viewing as this unit is offsite at the original shop. Sold AS IS. I can make a video for serious buyers to verify working condition and quality. Clean inside and out Works perfectly Heats quickly All controls in good working order Belt in excellent shape Single phase. 115 volt, 25 amp Size 14”W x 23”H x 33L x 20”D Please email for freight charges. Serious inquiries only on freight as it would have to be calculated offsite which may take a couple of days. I could also send you a video if interested. Terms and Conditions ... moreItem is sold as is. Where is with no warranty, implied or expressed. Returns and exchanges are not accepted. All sales are final. Some items may require additional service and or parts to reach OEM’s specifications. Payment via PayPal is due in 7 days. Item being sold is previously owned and is expected to show some wear. Terms and Conditions Shipping is by pick up or by arranged shipping. Shipping may be arranged by you or seller for your convenience. Contact seller prior to purchase to arrange. Shipping is in addition to purchase price if provided by seller.
|
|
|
BESELER Model T-14-8-D L-Bar Sealer/Shrink Tunnel Combination Unit
Console unit with a 12" x 16" seal area.and heat shrink tunnel. Ask about safe. Economical, and insured freight to your location.
|
|
|
Beseler Shrink Wrapper
Model T-18-8 Good running unit until taken out of production.
|
|
|
Beseler Standard Shrink Tunnel
Item Name: Beseler Standard Shrink Tunnel Item# 9243 Price/Each: $1.900.00 Year: Brand Name: Beseler Model: T20-9 Serial# 484440 Asset Tag: 4109 Item Location City: Watertown State: Connecticut Zip Code: 06795 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description Beseler Standard Shrink Tunnel Model# T20-9 Serial# 484440 220 Volt 60 HZ Single Phase 115 Volt Transformer Conveyor 79" Long Tunnel Opening L-52" x W-21" x H-9" Belt W-18.5" x L-79" Weight- 532 lbs $125.00 skidding fee at time of sale- Contact Us About This Machine Should you have questions. Please contact Jack at(860) 484-4449 PAYMENT& ... moreSHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a shipping quote. We usually ship within 5 business days of receipt of cleared payment. Freight shipments may take longer due to palletizing and scheduling. Items less than 100 lbs ship via UPS Ground. Freight may be booked with any carrier. But usually goes out on best available. If you need a lift gate please add $128.00 to your invoice. If your delivery location is residential, we will add $80.00 to the shipping charges. If a rigger is required please notify us prior to quoting shipping. Please email the sales rep for an accurate freight quote. If Buyer chooses to use their own freight. Shipping account and or carrier, they wi
|
|
|
BESELER MODEL T-15-12 SHRINK TUNNEL
FEATURES: ADJUSTABLE AIR VELOCITY CONTROL HIGH VELOCITY HEATED AIR TO ALL FOUR SIDES OF PRODUCT DOUBLE LAYERED CURTAINS FOR ADDED ENERGY EFFICIENCY TEFLON COATED OPEN MESH CONVEYOR BELT ADJUSTABLE SPEED CONVEYOR DRIVE( DC MOTOR CONTROL) ADJUSTABLE HEIGHT LEG EXTENSIONS WITH LOCKING CASTERS CHAMBER DIMENSIONS: 12” high x 15” wide x 52” long
|
|
|
Beseler Shrink Wrapper tunnel
You are bidding on one used Beseler Shrink Wrapper tunnel. The unit has been tested and works grea t.Works on 220 volts 1 phase, Please look at the pictures that are attached. You will only receive what you see in the pictures. Any questions please email me before you offer or purchase. Buyers are always welcome to arrange the shipping. Payment should be made no later than 5 days after the auction ends. It will be a 50.00 Skid charge fee, 200 if you n e ed a crate. Texas Residents Pay 8.25% sales Tax Local Pick ups are welcome with Cash on hand only. All items must be shipped. Picked up, or removed within 7 days of the end of auction"unless pre-approved via ebay message system" Items left after this time will be subject to a $20 per day storage fee. The buyer will forfeit the item- and any payments made- when storage fees reach ... moreeither the sale price of the item or a time period of 30 days from the sale of the item. Whichever comes first. No money will be returned for forfeited items. Without notice, items are subject to relisting immediately upon forfeiture. For items that have incurred storage fees, electronic payment of the fees due will be required for the item to be shipped or released for pickup. If you have reason for a delayed pickup please let me know.
|
|
|
BESELER SHRINK FILM EQUIPMENT DIVISION SHRINK WRAPPER 2016-MB-SL T-16-8-D DEAL !
YOU ARE LOOKING AT A BESELER SHIRNK WRAPPER/SEALER SET UP. SPECS AND DETAILS ARE AS FOLLOW: MODEL: 2016-MB-SL. VOLTS: 115. PHASE: 1. 60 HZ A.C. ONLY. MODEL: T-16-8-D. VOLTS: 220. PHASE: 1. 60 HZ. SOME ASSORTED PAPERWORK IS INCLUDED. PAPERWORK GOT WET AT SOME POINT BUT IS STILL READABLE. THE UNITS DO NOT INCLUDE ANY OTHER ACESSORIES OF ANY KIND WHAT-SO-EVER. BOTH UNITS ARE USED BUT IN GOOD COSMETIC AND WORKING CONDITION. THIS IS A MUST FREIGHT ITEM AND SEPARATE CHARGES WILL APPLY. IF YOU ARE INTERESTED IN A QUOTE PLEASE CALL(720-212-8328 OR 303-718-7834) OR EMAIL US. WHEN INQUIRING ABOUT A SHIPPING QUOTE PLEASE HAVE THE FOLLOWING INFORMATION NEEDED. READY. ZIP CODE TO ITEM DESTINATION. IS ITEM GOING TO A COMMERCIAL/BUSINESS/ OR RESIDENTIAL ADDRESS? IS THERE A LOADING DOCK OR FORKLIFT AVAILABLE AT DESTINATION POINT? IF YOU WISH TO ARRANGE FREIGHT ... moreON YOUR OWN PLEASE CONTACT US PRIOR TO DOING SO. CONTACT IS KEY FOR FREIGHT ITEMS THUS MAKE SURE YOU CONTACT US AND RECEIVE A QUOTE OR INSTRUCTIONS BEFORE THE PURCHASE OF SAID ITEM. THANK YOU DO-ALL-INDUSTRIES- GREAT DEAL. CATCH IT FAST! PLEASE READ AHEAD FOR ADVISEMENT AND CONSENT BEFORE PURCHASE OR BID: COMPANY: WE ARE A SURPLUS/LIQUIDATION SELLER. WE LIST AND DESCRIBE TO THE BEST OF OUR ABILITY AND KNOWLEDGE. IF YOU HAVE A QUESTION DO NOT HESITATE TO ASK WE WILL GIVE YOU THE BEST ANSWER POSSIBLE. WE ARE A BUSINESS AND ONLY OPERATE MONDAY THRU FRIDAY PLEASE WAIT FOR A BUSINESS DAY FOR COMMUNICATION AND RESPONSE TO ANY MESSAGES OR CONCERNS) ITEM CONTENTS: ONLY WHAT IS PICTURED AND DESCRIBED IS INCLUDED. IF IT IS NOT PICTURED OR LISTED IN DESCRIPTION IT IS NOT INCLUDED. TERMS: ALL ITEMS NEED TO BE PAID FOR WITHIN 72 HRS. OF AUCTIONS END. IF REQUIREMENTS ARE NOT MET YOU FORE-FIT YOUR RIGHT TO THE ITEM AND WE HAVE THE RIGHT TO REFUSE SALE AND CANCEL TRANSACTION TO YOU AT ALL TIMES AFTER DEADLINE. SHIPPING: AS THIS IS A FREIGHT ITEM ALL SHIPPING CHARGES ARE YOUR RESPONSIBILITY AT ALL TIMES! CONTACT US PRIOR TO BUYING FOR INFORMATION AND QUOTES. RETURNS/REFUND
|
|
|
BESELER SHRINK FILM EQUIPMENT DIVISION SHRINK WRAPPER 2016-GSM-SL
Unit powers on. No other testing was preformed, being sold as-is Local Pickup Only: Lakewood NJ, or buyer can make freight arrangements
|
|
|
Beseler Model 2014-MB Sealer & T-14-8-D Shrink Wrap Tunnel Packaging Machine
Beseler Model 2014-MB Shrink Wrap Sealer and Model T14-8-D Heat Tunnel in Used. Fully- Working Condition This was used up until about 2 months ago and we've never had issues with it. Full unit Shown in Pics Available for Local Pickup or Truck Freight Delivery(contact for Shipping Quote)
|
|
|
Beseler T-14-8 Heat Shrink Tunnel Shrink Wrap Oven Printing Finishing
BESELER HEAT SHRINK TUNNEL with THRU-CONVEYOR. Model T-14-8-B. 14" wide by 8" high tunnel opening with a 12" wide x 32" long belt through-conveyor with variable speed drive. 28" long tunnel with about 2" of conveyor sticking out on either end. Also has a heated bottom plate directly under the belt to provide for shrink and seal action on all sides. Complete with temperature controls for main tunnel and bottom plate. Painted steel construction. Some wear on the belt. Various scratches as you expect in an industrial unit of this type. Removed from service in good working condition. Ready for your use.
|
|
|
Beseler Shrink Sealer Model 1913 L-Bar Sealer
Breseler 17" x 13" seal bar. 12" wide belt. Removed from working environment. Scratches and overall wear but works well. These Breseler machines are heavy duty and will preform well for a long time. If you are looking for a solid sealer, take this one home(or to the shop)
|
|
|
Beseler Model 2016MB-SL L-Sealer &Model T-16-8 Shrink Tunnel
IN GOOD CONDITION. or Best Offer. MESH BELT 28' WORK AREA BELT LENGTH 33' 15' LR OPENING X 7' HEIGHT. Power Requirements: 115V 60Hz Current Rating: 25Amp Heater: Top Heater(2) 1000 Watts Hot Plate Heater 500 Watts Power Carries: Male Cord Set NEMA 5-30P. 11ft, 2P/Grd Std, Heavy-duty, permanently attached Female Connector NEMA 5-30R; 2P/Grd. Std, 30A, 125V Adjustable Belt Speed 0-30 FPM Maximum Package Size: 15" width. 7" hight Overall Conveyor Length: 33" Overall Tunnel Length: 28" Overall Dimensions: 33.25"L x 24.5"W x 22.75"H Shipping Weight: 150lbs. Delivery Not Available. Must Pick up All Items. Call with offers 630-771-0000 ex. 101. 8:30am- 5:00pm Mon- Fri) Leave a message if no answer. Company liquidation sale- other items available. Everything must go! Call for further details. di,RcmdId ... moreViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1433320dee3-0xf6-
|
|
|
Beseler T-20-12 shrink tunnel and 3520-MTB- A sealer
Beseler Shrink Tunnel and Beseler Sealer combination. Machines are in excellent condition. Serial for tunnel is 05950482. Serial for the sealer is 07950597.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14334b22508-0x103-
|
|
|
Beseler T 18 8 D Heat Shrink Shrinking Tunnel Machine
WE ACCEPT ALL MAJOR CREDIT CARDS Please call us for Direct Payments: 818) 241-2265 Office Hours are Mon-Fri 9am-6pm and Saturdays from 9am-2pm We are located at 4587 Brazil St. Los Angeles. CA 90039 Local Pickup is also Welcome! DESCRIPTION Charles Beseler Co. Heat Shrink Tunnel_ This item was working before removal. But we do not have the equipment or the ability to fully test it. For this reason, the item is being SOLD AS IS. Cosmetically. It is in good condition with some usage ware. For more information on the cosmetics of the item for sale, please take a look at our pictures near the bottom of the page. Thank you. OVERALL DIMENSIONS 52" x 36" x 20 1/2" 300lbs LCW SP 22114 1_ Shipping: Shipping to the United States will be: Unavailable- Freight Only. We ship worldwide! Just email us for a quote on International Shipping. ... moreSalesbaron is in Los Angeles. 90039 PAYMENTS We accept PayPal and all major credit cards. Please contact us for direct credit card payments. SHIPPING Packages are usually shipped within 5-Days of payment receipt(excluding Saturday/Sunday) All orders are shipped via FedEx and USPS. International buyers. Please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. RETURNS We list and photograph every item we sell so you can feel confident when bidding. We only accept returns under certain circumstances with in 14 days of delivery. Shipping costs are non-refundable. CONTACT US Monday- Friday: 9am to 6pm PST Saturday: 9am to 2pm PST Address: 4587 Brazil Street Los Angeles. CA 90039 Telephone: 818-241-2265 ABOUT US Sales Baron is one of the fastest growing eBay consig
|
|
|
BESELER T-20-12 PACKAGING HEAT SHRINK TUNNEL+CLAMCO L-BAR PLASTIC BAG SEALER
TESTING& COSMETIC NOTES: This is a USED WORKING item in GOOD cosmetic condition that WAS PULLED FROM A WORKING ENVIRONMENT and is GUARANTEED WORKING The L-Bar sealer heats up to seal and cut the plastic bags. We do not have sufficient power to test the shrink tunnel. But the previous owner is confident it is in good working order. COMPONENTS INCLUDED IN THIS AUCTION: (1) BESELER T-20-12 PACKAGING HEAT SHRINK TUNNEL OVEN 220V 60HZ SINGLE-PHASE AC 60A (1) CLAMCO L-BAR PLASTIC BAG HEAT SEALER 772-20 CONSOLE STAND MAGNETIC HOLD-DOWN POWER TAKE-AWAY CONVEYER PIN WHEEL PREFORATION HOLE PUNCH (2) INTEGRATED POWER CORD (1) PLASTIC PACKAGING WRA (1) PACKAGING PREFORATOR REPLACEMENT or MONEY BACK GUARANTEE: When you receive a Guaranteed item from OC Depot. It should perform as described. In the rare situation that this is not the case, we ... morewill send a replacement upon safe return of the original item within 14 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. ADDITIONAL INFORMATION: Please Click Here and Read Our Sales Policies Due to the size or weight of this item. It must be shipped via freight. Dimensions: 164x40x58 inches- Weight: 1030 pounds. Please contact us via eBay for a freight quote to your area. at" at" src="http:ocdepot.com/template/Rounded_Middle_Right.gif" at" src="http:ocdepot.com/template/Rounded_Left_Bottom.gif" at" at" src="http:ocdepot.com/template/Rounded_Middle_Bottom.gif" at" src="http:ocdepot.com/template/Rounded_Right_Bottom.gif" SearchBy8- 56477 | Location: FLR | Lister: Tommy | Tester: TESTER NAME HERE' | Tech: | Quan: 1 | List: 1 | Duplicate: False | Plan: F- Q1 5 pounds or more | Amazon: Size: 164x40x58 Weight: 1030 | Start: $4999.97 | BIN: $0.00 | Type: Auction | $hippingBump: $0 | Date: 2/27/2014 | Condition: Used Working | CONSIGNOR VIDE O | RESEARCH LINK | Created: 2/27/2014 | Business& Industrial MRO& Industrial Supply Material Handling
|
|
|
Beseler 1611 L Sealer and Shrink Tunnel
Please contact with questions. Sold as-is. Where-is. Posted with g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-144a67e3e4f-0x105-
|
|
|
Beseler L-Bar Sealer & Heat Shrink Tunnel Combo
Available today is this L-Bar Sealer and Shrink Tunnel Combo Set(all on one frame) The L-bar sealer has a seal area of 13" X 19" Impulse seal wires. Magnetic Seal Bar Hold Down, Power product takeaway conveyor The shrink tunnel has a chamber opening of 14" X 9" high& features a silicone rubber conveyor belt. Both pieces are attached to a common chassis. Both run off of 115 volts(would require separate circuits) Both units have been gone through& tested. Worn components were replaced with new. So its ready for production. Crating is included in the sale price. This machine will ship from our facility: Great Plains Packaging Systems 17190 214th St Davenport. Ia. 52806 The crate will be approx 4' X 8' X 5' high. Estimated crated weight at 450 lbs. Class 125 NMFC 130110 would be the freight class for this ... moremachine Any questions? Please contact us through the following: EBAY's"Ask a question" My personal e-mail Todd@gpps.com Office: 563-391-9809 Cell: 563-529-4415(24/7)
|
|
|
Beseler Heat Shrink Tunnel, Shrink wrapper, Shrink Sealer
Available today is this LIKE NEW Beseler Model T-16-8 Heat Shrink Tunnel. Not a scratch on this machine and it shows NO SIGN OF BEING USED. Typically. A machine like this would have plastic stuck to the inside of the shrink chamber, the chamber opening curtains would be discolored and tattered. The teflon mesh conveyor belt would have small rips& tears. Not this guy! All in Like New Condition. We are pretty sure this machine has never seen production! Made in NEW JERSEY. Not a cheesy import! Tunnel chamber opening of 16" wide X 9" high. Requires 220 volts. 1 ph@ 25 amps, so this could be run in a residential application if needed! There are locking swivel casters for ease of mobility. Solid state controls for both Chamber heat and Conveyor belt speed. She's full tested and 100% ready for production. Just plug her in an go! ... moreProper crating for common carrier shipping is included. A FULL 90 DAY PARTS WARRANTY IS INCLUDED. This machine will ship from our facility: Great Plains Packaging Systems 17190 214th St Davenport. Ia. 52806 The crate will be approx 4' X 4' X 5' high. Estimated crated weight at 350 lbs. Class 125 NMFC 130110 would be the freight class for this machine Any questions? Please contact us through the following: EBAY's"Ask a question" My personal e-mail Todd@gpps.com Office: 563-391-9809 Cell: 563-529-4415(24/7)
|
|
|
Beseler Shrink Wrapping System - 12" x 18" L-Sealer
Two Parts: Beseler Heat Tunnel Model T-16-8. Takes items 15" wide x 7" high. Conveyor length is 33" 220 VAC single phase. 25 Amp. 4500 Watts total heat(adjustable) Belt speed 0- 30 ft per min. 34" long x 23" wide x 55 high. 200 lbs. This part of the system of the system was purchased new and is still in like new condition. This whole system was used just little more than one year. Beseler L-Sealer Model 2014- MB. 12" x 18" Sealer. Semi-automatic. 110 VAC. 52" long x 24" Wide x 38" high. 400 lbs. This part of the system was used when we purchased it. It is not in perfect condition. The sealer is works as follows: Put item in film pocket. Slide item under L-arm. Press L-arm down and it locks automatically. Magnetically. Wires heat up and make seal. After a select time magnets release arm and ... morearm swings up. At the same time a conveyor belt starts and transports the sealed item into the Heat Tunnel for shrinking. As it is rigth now, everything works except the conveyor. So, after the sealing is done and the arm lifts, you have to push the item into the Heat Tunnel manually. All of this makes the whole process a little slower than if the conveyor worked. The conveyor could be fixed easily. Beseler is actively in business. One of their offices is New Jersey. We used the system as it is for some time. It works well enough this way. A nearly full spool of burning wire, and many rolls of film are included. In the pictures there is shown an exhaust fan mounted over the L-arm. We added this. It is included. Located in Central New Jersey. Fork lift available. It would be possible to palletisze. But, I think it would take 2-pallets. 732-233-6596.
|
|
|
Beseler Heat Shrink Wrap Machine with Heat Tunnel
Two Items in This Auction: Both the Beseler Shrink Wrap Machine and the Beseler Heat Tunnel are in Like New Condition and Have had Very Little Use since New. No Shipping. Will Deliver up to 100 miles from 42701 Zip Code Payment: PayPal or Cash when items are picked up. Payment is due with in 2 days of Auctions End. Items must be picked up with in 5 days of auctions end unless arrangements are made. Reserve Price Auction Machines are in Like New Condition with Very Little Use. Your chance to Save Lots of Money. All Sales are Final No Warranty. Items are Sold As-Is Beseler Heat Tunnel Model T-16-8-D. Takes items 16” wide x 8" high. Conveyor length is 33" 220 VAC single phase. 25 Amp. 4500 Watts total heat(adjustable) Belt speed 0- 30 ft per min. 34" long x 23" wide x 55 high. Beseler Sealer Model 2016– MTB-SLB. Sealer. Semi-automatic ... moreSealer. The sealer is works as follows: Put item in film pocket. Slide item under arm. Press arm down and it locks automatically. Magnetically. Knife heats up and makes seal. After a select time magnets release arm and arm swings up automatically. At the same time a conveyor belt starts and transports the sealed item into the Heat Tunnel for shrinking. Heat Shrink Tunnel Seals Package. Operates on 115 Volts. Also. Comes with 2 New Rolls of Shrink Wrap Film and 4 Extra Felt Sealing Knife Pads Shrink Wrap Machine Model Number 2016-MTB-SLB• 24″ x 20″ seal area• Self-adjusting seal pads• Fully welded heavy duty seal head• Fully welded 11 gauge steel frame• Heavy duty automatic dual magnets• Adjustable height seal area platform• Auto seal temperature compensator• Variable speed soft start conveyor• Stainless steel film hold downs• Stainless steel product loading tray• Quick lock wire tensioners• Film tension brake• Easy access slide out control panel• Micro perforator• Storage shelf and casters• Hot knife option• Durable powder coat finish• Heavy duty casters• 115 volt single phase Shrink Wrap Tunnel Model Number T-16-8-D• 16" wide 8" tall 28" long tunnel
|
|
|
Beseler Shrink Film/Wrap Equipment
The following equipment. Valued at approximately $2,500, has not been needed for quite some time. Please email for a phone number and directions to view the equipment. No reasonable offer will be refused as it is simply taking up space here. Beseler Model 2014-MB Shrink Film Equipment- S/N: 06950503 and Beseler Model T-14-8 Shrink Tunnel/Over- S/N: 06950577
|
|
|
Beseler Model T-20-9 Shrink Tunnel
This is a working shrink tunnel system. It was at one point dented during shipping. But subsequently repaired. The conveyer belt is worn and has a tear.
|
|
|
Beseler Shrink Wrap System - Model 1812-M
Class Used, Brands Bessler, Model 1812-M, Product size 87" x 30" x 59" Wotol reference 1139434, Your reference Bessie, Quantity 1, Year 2010, Price 3000.00, Location AMERICA North(USA-Canada-Mexico) Description Brand: Beseler Model: 1812 M L Sealer and Shrink Tunnel Machine Availability: In stock- Must Arrange for Pickup Quick Overview with conveyor SEALERS: 18" x 12" seal area Self-adjusting seal pads Easy quick change Mono seal wire Fully welded heavy duty seal head Fully welded 11 gauge steel frame Heavy duty automatic magnetic hold down Adjustable height seal area platform Auto seal temperature compensator Variable speed conveyor Stainless steel product loading tray Quick lock wire tensioners Pin wheel perforator TUNNEL: 12" wide 6" tall 20" long tunnel chamber Bottom heated solid conveyor belt ... moreHigh velocity blower Heat ducted to sides and top Thermostatic temperature control Variable speed 0-30 fpm conveyor Standard single plug for portability Finned Cal-rod heaters Durable electro-static powder finish 2000 watts of available heat Dimensions: 80" x 28" x 56" Shipping Dimensions: 87" x 30" x 59" 412lbs Power Required: 115V 20amps Seal/Tunnel:18" x 12" Packages per Minute: 10-12 Max product size: 17" x 11"
|
|
|
BESELER SHRINK WRAP SYSTEM: 2014 SEALER, T-14-8 HEAT TUNNEL, AIR TRANSPORT RAMP
Excellent Condition. Very Little Use! Beseler COMPLETE 2014 Sealer Series Packaging Shrink Wrap System with T-14-8 Heat Tunnel. L-Bar System and Custom Built Air-Blower Package Transport Table/Ramp. PLUS. 3 1/2 roles of plastic shrink wrap included! BESELER 2014 SEALER FEATURES: Precision machined extruded aluminum sealing head- Self adjusting magnet hold downs- Adjustable seal head opening- Stainless steel film hold downs- Quick change sealing pads- Heavy duty formed& welded frame reinforcements- Quick change seal wires- Locking stainless steel separator tray- Adjustable film opening bar- Improved standard rotary hole perpetrator- Film tension brake- Control panel with precision temperature control& troubleshooting lights- Dwell selector T-14-8 TUNNEL FEATURES: Four sided tunnel heat; air from top& sides plus heated belt- Tunnel ... moretemperature& conveyor speed controls- Bottom heat temperature control- Silicone covered fiberglass conveyor belt IN ADDITION! Custom Built Curved Air-Blower Package Transport Table/Ramp and 3 1/2 roles of plastic shrink wrap. Above are Pictures of the actual unit as well as from the brochure that came with the machine. Unit can be viewed by appointment prior to purchase. Local Pick-Up Only
|
|
|
Shrink Wrap Machine - Beseler - L Bar Sealer and Heat Shrink Tunnel!
Everything is in good working order plus I have several hundred worth of shrinkwrap that goes with it. Free pickup in Central Michigan area. This came out of the shop I used to work at in Traverse City. MI. I've used it but my needs have changed and I can use the space. Feel free to ask any questions. I have parts plus manual and Beselers are the best. It's an old workhorse. It could be shipped with the buyer paying freight. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-146e01f2aed-0x10d-
|
|
|
Bestronic-Beseler Shrink Tunnel and L-Sealer with metal stand
Bestronic Mini Shrink Tunnel Model No. T14-8 Dimensions: 33 inch length x 20 inch depth x 23 inch height. Beseler L-Sealer Model No. T-14-8-D. Serial No. 10841375, Sealer Capacity: 14 inch x 21.5 inch. Both the Shrink Tunnel and L-Sealer sit on an included metal stand.
|
|
|
Beseler Shrink Wrap Tunnel T-18-8
Beseler Shrink Wrap Tunnel Model: T-18-8 Volts: 220 Hertz: 60 Single Phase Amps: 40 Total Size: 53” h 44” w 28”d Please contact us before bidding for freight shipping quote. Local pickup is also available. Creative Printing Services 407-891-9797 Print(at)CreativePrintingFL.com
|
|
|
Beseler T- 14 - 8 Shrink Wrap Cutter
Equipment by CrownLitho Printing- Please email to discuss shipping price and destination. jordan@marshallstearns.com.
|
|
|
BESELER MODEL T-15-9 SHRINK TUNNEL
IF YOU HAVE ANY OTHER QUESTION PLEASE LET ME KNOW I WILL TRY TO ANSWER YOUR QUESTIONS THE BEST I CAN! FEATURES: ADJUSTABLE AIR VELOCITY CONTROL HIGH VELOCITY HEATED AIR TO ALL FOUR SIDES OF PRODUCT DOUBLE LAYERED CURTAINS FOR ADDED ENERGY EFFICIENCY TEFLON COATED OPEN MESH CONVEYOR BELT ADJUSTABLE SPEED CONVEYOR DRIVE( DC MOTOR CONTROL) ADJUSTABLE HEIGHT LEG EXTENSIONS WITH LOCKING CASTERS CHAMBER DIMENSIONS: 9” high x 15” wide x 52” long SHIPPING: BUYER IS RESPONSIBLE FOR ALL SHIPPING COST! I MAY BE ABLE TO HELP TRANSPORT WITHIN A 100 MILE RADIUS FROM 45050 FOR A ADDITIONAL FEE OF $.55 PER MILE I WILL BE ABLE TO HELP GET IT TO A TRUCKING HUB IN THE AREA FOR THE SAME MILEAGE $.55 AND ALL CRATING AND MATERIAL USED WILL BE AN ADDITIONAL FEE! GOOD LUCK AND THANK YOU FOR LOOKING AT MY AUCTION
|
|
|
Beseler 1812 MTB-II Shrink Wrap L Bar Sealer & Tunnel Combo EXCELLENT CONDITION
Used- 1812 MTB-II Beseler Shrink Wrap System- Sealer& Tunnel Combo EXCELLENT CONDITION PRODUCT FEATURES: Sealer: 18" x 12" seal area Self-adjusting seal pads Easy quick change Mono seal wire Fully welded heavy duty seal head Fully welded 11 gauge steel frame Heavy duty automatic magnetic hold down Adjustable height seal platform Auto seal temperature compensator Variable speed conveyor Stainless steel product loading tray Quick lock wire tensioners Pin wheel perforator Tunnel: 12" wide 6" tall 20" long tunnel chamber Bottom heated solid conveyor belt High velocity tunnel Heat ducted to sides and top Thermostatic temperature control Variable speed 0-30 fpm conveyor Standard single plug for portability Finned Cal-Rod heaters Durable electro-static powder finish 2000 watts of available heat Casters included Single ... morePlug Operation- 115 Volts 20 Amps Machine Size& Weight- 80" x 28" x 56" One Piece Combo 412 lbs Seal& Tunnel Area- 18" x 12" 12" x 6" x 20" Packages Per Minute- 10 to 12
|
|
|
Bestronic Beseler T20-9A1 Shrink Tunnel Conveyor 220V 1PH, USED
Bestronic Beseler T20-9A1 Shrink Tunnel Conveyor 220V 1PH. USED Bestronic Beseler T20-9A1 Shrink Tunnel Conveyor 220V 1PH. USED Used working Beseler Bestronic T20-9A1 Heat Shrink Tunnel Conveyor Unit. This item was removed from a previously working location. And it appears to be in great shape! Has a mesh conveyor belt that measure approximately 19" but I believe you could use a belt as large as 21" This unit is mounted on casters for easy maneuverability. Features a variable speed controller and temperature controls. Model: T20-9A1. Serial: 0975585 220 Volt. 60 Hz, 1 Ph, AC Only, 60 Amp Weight: 548 Dimensions: Overall: 78" L x 31" W x 47" T Tunnel: 21" W x 9" T Mesh Belt: 19" W Payment: Please notify us of your intentions of paying within 3 days after auction ends. We are flexible and understand that ... moreyou may need a little more time to pay for your item. But please do not abuse this privilege. Purchased items must be paid for within 14 days of your commitment to buy. If the item is not paid for in this time. An unpaid item case will be filed with Ebay in an attempt to recoup our listing and final value fees. Once the case is closed, the item will be relisted for sale. Non-payment of purchased items will result in negative feedback. Ways to Pay: Most transactions can easily be paid through Paypal. This website also accepts most major debit or credit cards(Mastercard. Visa) and can accept checks. You also have the option to pay cash on pickup or mail check, but please contact us regarding your preferences first. Shipping Costs& Zip Code Info: Buyer is responsible for all shipping costs. We do combine shipping. If you are purchasing more than one item. Please wait for us to send you an invoice with all purchases combined to get the best shipping rate. International Buyers: MUST handle your own Shipping and any forms(like customs forms) that would be required for the shipment. We will only provide a commercial invoice and the weights& measurements for the shipment. We w
|
|
|
Beseler Bestronic Mini Heat Shrink Tunnel T14-8-D, 115v, 1ph, 25a - SKU 10
Beseler Bestronic Mini Heat Shrink Tunnel T14-8-D. 115v, 1ph, 25a- SKU 10 Please ask questions prior to bidding. Free local pickup is available in Tacoma. Upon request. Thank you for your interest! Will be shipped via freight.
|
|
|
BESELER SHRINK SYSTEM WITH 1913-MB L-BAR SEALER AND T-14-8-D HEAT TUNNEL
BESELER shrink system with L-BAR SEALER model 1913-MB and HEAT TUNNEL model t-14-8-D Shipping Cost $360.00(The shipping service that we offer is only for the 48 lower states. It does not include Hawaii, Alaska, or any off-shore US Territories) Unit is removed and ready to ship. $150 charge for Crate(Outside of Shipping& Handling Cost) Description Information Lot Number SEA-2297 Manufacturer BESELER CORPORATION Model 1913-MB Serial 8841076 Seal Area 19" long x 13" wide Conveyor Speed 0 to 30 feet per minute Electrical 115 Volts/ 1 Phase/ 60 Hz/ 20 Amps. Type of Stand Heavy duty frame Dimensions L 89” x W 24” x H 53” Weight 750 lb Sealer Features· Control Panel: Simple. Easy to use control panel· Conveyor: Takeaway conveyor Oven Description· Model: T14-8-D· Serial: 185109· Tunnel Path Dimensions: 28” L ... morex 14” W x 8”H Condition USED. IN EXCELLENT WORKING CONDITION Location Miami. FL USA REFUND We will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment(CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimu
|
|
|
Beseler Corporation Shrink Wrap Equipment Model 1720-G-MTB, PSU
You are bidding on a used Beseler Corporation Shrink Wrap Equipment Model 1720-G-MTB. The item was working when removed from service but we are unable to test this item at our facility. Please only bid the amount you would feel comfortable if this item needed repairs. We are selling this item"As is" Approximate Dimensions: 54" H 48" D 58"W We do not have the ability to weigh this item. We do not have the ability to safely pack& ship this item ourselves. We recommend a local shipping company called Zeigler's Packing& Crating to have items shipped. They have shipped items from our store in the past. You can call them for a cost estimate at 814-238-4021. Please ask any questions you need to know before bidding. Due to the amount of volume we process at Lion Surplus. We cannot test or guarantee any items. ... moreMost equipment will work fine, but please only bid the amount you are comfortable bidding if any repairs are needed. Most items will sell for a small fraction of what they cost new, but we in no way want to misrepresent what we sell. We will disclose any negative information about every item we sell, but since descriptions may be short, please do diligence in researching these items before you bid. All items are sold as-is and where-is with no warranties expressed or implied. We are a Penn State surplus store and not a dedicated equipment reseller; therefore many of our items come to us with little or no information. All sales are sold in"as is. Where is" with possible latent and apparent defects, with no return, no warranty and no guarantee all sales are final. If you have any concerns, please ask before bidding. We accept Visa/MasterCard. All payments must be made with USA funds. We expect payment within 3 working days; we will release for shipping as soon as the item is crated for shipping and payment is made. Our hours of operation are Monday- Friday from 8:30am until 3:30pm pickup would need to be made during these days and hours. Please keep in mind we are closed
|
|
|
BESELER SHRINK WRAPPING SYSTEM 1611, EXLT., SHANKLIN, BELCO, EASTEY,
BESELER SHRINK WRAP SYSTEM 1611 THIS WORKS EXCELLANT! ~'L' SEALER TRIMS PERFECT ~ SPEED CONTROL AND TEMP CONTROL ~ TUNNEL TEMP WORKING EXLT. ~ YOU WILL BE VERY PLEASED WITH THIS UNIT! WE CAN SHIP ANYWHERE- I JUST NEED TO KNOW WHERE TO GET YOU A PRICE! CALL OR TEXT ME AT 714 642 7990 DAVE
|
|
|
Bestronic Beseler Mini Shrink Tunnel Wrapping Sealing Machine T14-8
Bestronic Beseler Mini Shrink Tunnel Wrapping Sealing Machine T14-8 THIS UNIT IS USED. BUT APPEARS TO BE IN FAIR CONDITION. IT HAS NOT BEEN TESTED AT OUR FACILITY. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PURCHASE IN QUANTITY TO SAVE ON SHIPPING! PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: OVERALL DIMENSIONS: WIDTH: 22" LENGTH: 90" HEIGHT: 24" SHIPPING WEIGHT: 365 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP VIA MOTOR FREIGHT TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA MOTOR FREIGHT UPON REQUEST. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT ... moreOF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANT
|
|
|
Beseler-Bestronic Model T14-8. Shrink wrap tunnel and sealer
Beseler-Bestronic shrink wrap machine Model T14-8. S/N781478. Machine was in working condition when pulled out of packing shop. Machine is sold as-is where is. We can palletize and load into a truck for addition fee. For more info please contact Ron at 201.519.0219.
|
|
 |