In 
 
Order by: 
Available to: 
Price: 
 - 
$
36.99
Buy It Now
$0 Shipping
Condition: New
Location: Fontana,CA,USA
$
25.99
Buy It Now
$0 Shipping
Condition: New
Location: Fontana,CA,USA
$
19.85
Buy It Now
$5 Shipping
Condition: New
Location: China
$
234.5
Buy It Now
$32.5 Shipping
Condition: New
Location: Southington,CT,USA
$
20.13
Buy It Now
$0 Shipping
Condition: New
Location: Joliet,IL,USA
$
43.44
Buy It Now
$0 Shipping
Condition: New
Location: Millington,TN,USA
$
19.99
Buy It Now
$0 Shipping
Condition: New
Location: Ponte Vedra,FL,USA
$
42.48
Buy It Now
$4.99 Shipping
Condition: New
Location: Hollywood,FL,USA
CRL Gray 1/8" x 1-1/2" Single Sided Foam Glazing Tape. CRL Foam Glazing Tape is a closed-cell polyethylene foam sealant in tape form. The aggressive ... moreacrylic adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure. Adheres to wood. Vinyl, aluminum, and glass. It can be used as an exterior glazing sealant- particularly where glass repositioning is important before the final setting. Excellent Adhesion to Wood. Vinyl(Rigid PVC) Aluminum, and Glass Superior Resistance to Weathering. Oxidation, and UV Exposure Meets AAMA 810.1 Certification Aggressive Adhesive Service Temperature Range From- 40øF to 180øF(40øC to 82øC) Available in Gray and Black CRL Foam Glazing Tape is specifically designed to be a primary or secondary seal in a variety of glazing systems. It is self-shimming. So you don"t need shims or spacers. The tape is constructed with a patented cellular structured foam that is particularly resistant to weathering and water-absorption, while providing a superior long-lived seal. Joints sealed with CRL Foam Glazing Tape with Adhesive on One Side can be opened and closed. Repositioned, and used without the sticky mess associated with sealants. Use this tape in demountable partitions, louvers, formwork, access panels, doors, and other operable or temporary joints. The non-adhesive face will release cleanly from most surfaces. When a joint is opened the tape recovers most of it original uncompressed thickness and is ready to be used again. CRL FOAM GLAZING TAPE WITH ADHESIVE ON ONE SIDE HAS THE FOLLOWING FEATURES: Simplicity: Requires no clean-up. Easy to handle, no waste, requires no mixing or special application equipment. Preformed tape provides consistent and accurate application. No shim is required. Remains flexible at low temperatures and dimensionally stable at high temperatures. Special non-yellowing. Non-staining water-white adhesives provide a clean, aesthetic appearance. Superior resistance to weathering. Oxidation, and
$
23.64
Buy It Now
$4.99 Shipping
Condition: New
Location: Hollywood,FL,USA
CRL White 1/16" x 3/8" Double Sided Foam Glazing Tape. CRL Foam Glazing Tape is a closed-cell polyethylene foam sealant in tape form. The aggressive ... moreacrylic adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure. Adheres to wood. Vinyl, aluminum, and glass. It can be used as an exterior glazing sealant- particularly where glass repositioning is important before the final setting. Excellent Adhesion to Wood. Vinyl(Rigid PVC) Aluminum, and Glass Superior Resistance to Weathering. Oxidation, and UV Exposure Meets AAMA 810.1 Certification Aggressive Adhesive Service Temperature Range From- 40øF to 180øF(40øC to 82øC) Available in Gray and Black CRL Foam Glazing Tape is specifically designed to be a primary or secondary seal in a variety of glazing systems. It is self-shimming. So you don"t need shims or spacers. The tape is constructed with a patented cellular structured foam that is particularly resistant to weathering and water-absorption, while providing a superior long-lived seal. CRL FOAM GLAZING TAPE WITH ADHESIVE ON TWO SIDES HAS THE FOLLOWING FEATURES: Simplicity: Requires no clean-up. Easy to handle, no waste, requires no mixing or special application equipment. Preformed tape provides consistent and accurate application. No shim is required. Remains flexible at low temperatures and dimensionally stable at high temperatures. Special non-yellowing. Non-staining water-white adhesives provide a clean, aesthetic appearance. Superior resistance to weathering. Oxidation, and ultraviolet exposure. Seals effectively against water. Dust, and light. Variety of available sizes A minimum of 30% compression must be maintained to provide an effective moisture seal. In small lites. This may be achieved by applying pressure directly to the glazing tape when installing glazing stops. However, in most lites, the use of a compression wedge gasket is recommended. Apply with firm, uniform pressure to a clean, dry surface without stretching(the pa
$
78.95
Buy It Now
$0 Shipping
Condition: New
Location: Maple Heights,OH,USA
3/8" Closed Cell Backer Rod 1.400 Ft. Closed Cell Backer Rod Closed Cell Backer Rod available in multiple diameters and lengths Meets ASTM C1330. ... moreASTM D5249 For Use with Cold Applied Sealants Closed Cell Polyethylene Foam Nonimpregnated. Nonstaining, and nonbleeding Inert and does not adhere to sealants Meets all requirements of the 1990 Clean Air Act Is a"Domestic End Product" as defined by the Buy American Act. Title 41 USC 10 Closed cell backer rods are designed to limit the depth of sealants. Help the sealant assume an hourglass shape(which prolongs sealant life) and serve as a bond breaker to prevent bottom-side adhesion. Backer rods do not stain sealants, and are chemically inert. They are non-gassing, non-exuding, and virtually dust-free. Due to physical and chemical inert nature, backer rod is compatible with virtually all known cold sealants, including self-leveling sealants- butyl, polysulfide, acrylic polyurethane, silicone, and most other cold-applied sealants Diameter of Rod: 3/8" Feet per Roll: 1.400 Ft. Joint Preparation and Installation: Clean all joints. Remove any concrete form-release agents. Curing compound residue, laitance, and any other foreign materials. To ensure good bond. Joints must be clean and dry when the new sealant is installed. Air compressors must be equipped with traps for oil and moisture removal. Install backer rod at depth recommended by sealant manufacturer- use a blunt tool. Commonly used in expansion/contraction joints such as: Curtain Wall Partitions Bridge and Highway Construction Parking Decks Pre-Cast Assemblies Glazing Applications Panel Systems Part No: RLCCB38H*International shipping is available. Please contact us for international shipping charges. By placing an order with LK Technologies. Inc. through eBay, you acknowledge and agree to the following conditions: PAYMENT POLICY- TechnologyLK accepts major credit cards via PayPal. We also accept Cashier's Checks and Bank Wire Transfers. Other payment options may be available- please contact
$
299.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Lee's Summit,MO,USA
$
25.99
Buy It Now
$0 Shipping
Condition: New
Location: Liberty,MO,USA
$
81.84
Buy It Now
$0 Shipping
Condition: New
Location: Maple Heights,OH,USA
5/8" Closed Cell Backer Rod 1.550 Ft. Closed Cell Backer Rod Closed Cell Backer Rod available in multiple diameters and lengths Meets ASTM C1330. ... moreASTM D5249 For Use with Cold Applied Sealants Closed Cell Polyethylene Foam Nonimpregnated. Nonstaining, and nonbleeding Inert and does not adhere to sealants Meets all requirements of the 1990 Clean Air Act Is a"Domestic End Product" as defined by the Buy American Act. Title 41 USC 10 Closed cell backer rods are designed to limit the depth of sealants. Help the sealant assume an hourglass shape(which prolongs sealant life) and serve as a bond breaker to prevent bottom-side adhesion. Backer rods do not stain sealants, and are chemically inert. They are non-gassing, non-exuding, and virtually dust-free. Due to physical and chemical inert nature, backer rod is compatible with virtually all known cold sealants, including self-leveling sealants- butyl, polysulfide, acrylic polyurethane, silicone, and most other cold-applied sealants Diameter of Rod: 5/8" Feet per Roll: 1.550 Ft. Joint Preparation and Installation: Clean all joints. Remove any concrete form-release agents. Curing compound residue, laitance, and any other foreign materials. To ensure good bond. Joints must be clean and dry when the new sealant is installed. Air compressors must be equipped with traps for oil and moisture removal. Install backer rod at depth recommended by sealant manufacturer- use a blunt tool. Commonly used in expansion/contraction joints such as: Curtain Wall Partitions Bridge and Highway Construction Parking Decks Pre-Cast Assemblies Glazing Applications Panel Systems Part No: RLCCB58B*International shipping is available. Please contact us for international shipping charges. By placing an order with LK Technologies. Inc. through eBay, you acknowledge and agree to the following conditions: PAYMENT POLICY- TechnologyLK accepts major credit cards via PayPal. We also accept Cashier's Checks and Bank Wire Transfers. Other payment options may be available- please contact
$
83.56
Buy It Now
$0 Shipping
Condition: New
Location: Jonestown,PA,USA
$
41.81
Buy It Now
$0 Shipping
Condition: New
Location: Jacksonville,FL,USA
$
12.54
Buy It Now
$5 Shipping
Condition: New
Location: USA
Store Categories. Click to close full size. For warranty information. HERCULES 15806 Thread Sealant.8 fl. oz.White G7545307. HERCULES. Item Specifics. ... moreItem. Type. Application. Improves Seal on Threads. Color. White. Container Type. Can. For Use With. Steel. Stainless Steel, Brass, Copper, Aluminum, and on Plastics Including PVC, CPVC and ABS. Includes. Brush in Cap. Item. Megaloc(R) Thread Sealant. Size. 8 fl. oz. Application Time. Immediate. Standards. MIL SPEC TTS-1732 and MIL A-12342A(CE) NSF 61, Meets C.S.A. Requirements 4-90, Approved for Listing By IAPMO/UPC. Viscosity. Paste. Specific Gravity. 1.2. Performance Temp. Range. 50 Degrees to 400 Degrees F. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less than $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. UPS is our primary parcel carrier and we use a variety of carriers for LTL shipments. Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Zoro only accepts orders for shipments within the continental US. Orders to international destinations. Alaska and Hawaii will not be processed. Zoro does not ship to PO Box addresses. Returns If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting Zoro’ Customer Service Department at 855-BUY-ZORO(855-289-9676) or through Ebay Messaging. Our customer service hours are Monday through Friday from 7am to 7pm. And Saturdays 9am to 2pm(CT) Include a copy of the original orde
$
199
Buy It Now
$0 Shipping
Condition: New
Location: Garden City,MI,USA
$
24.09
Buy It Now
$4.99 Shipping
Condition: New
Location: Hollywood,FL,USA
$
24.97
Buy It Now
$0 Shipping
Condition: New
Location: Detroit,MI,USA
$
61.34
Buy It Now
$0 Shipping
Condition: New
Location: Ontario,CA,USA
$
42.24
Buy It Now
$0 Shipping
Condition: New
Location: Denver,CO,USA
$
29.43
Buy It Now
$4.99 Shipping
Condition: New
Location: Hollywood,FL,USA
CRL Black 1/8" x 3/4" Single Sided Foam Glazing Tape. CRL Foam Glazing Tape is a closed-cell polyethylene foam sealant in tape form. The aggressive ... moreacrylic adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure. Adheres to wood. Vinyl, aluminum, and glass. It can be used as an exterior glazing sealant- particularly where glass repositioning is important before the final setting. Excellent Adhesion to Wood. Vinyl(Rigid PVC) Aluminum, and Glass Superior Resistance to Weathering. Oxidation, and UV Exposure Meets AAMA 810.1 Certification Aggressive Adhesive Service Temperature Range From- 40øF to 180øF(40øC to 82øC) Available in Gray and Black CRL Foam Glazing Tape is specifically designed to be a primary or secondary seal in a variety of glazing systems. It is self-shimming. So you don"t need shims or spacers. The tape is constructed with a patented cellular structured foam that is particularly resistant to weathering and water-absorption, while providing a superior long-lived seal. Joints sealed with CRL Foam Glazing Tape with Adhesive on One Side can be opened and closed. Repositioned, and used without the sticky mess associated with sealants. Use this tape in demountable partitions, louvers, formwork, access panels, doors, and other operable or temporary joints. The non-adhesive face will release cleanly from most surfaces. When a joint is opened the tape recovers most of it original uncompressed thickness and is ready to be used again. CRL FOAM GLAZING TAPE WITH ADHESIVE ON ONE SIDE HAS THE FOLLOWING FEATURES: Simplicity: Requires no clean-up. Easy to handle, no waste, requires no mixing or special application equipment. Preformed tape provides consistent and accurate application. No shim is required. Remains flexible at low temperatures and dimensionally stable at high temperatures. Special non-yellowing. Non-staining water-white adhesives provide a clean, aesthetic appearance. Superior resistance to weathering. Oxidation, and u
$
30.25
Buy It Now
$0 Shipping
Condition: New
Location: Bayville,NJ,USA
$
144.95
Buy It Now
$0 Shipping
Condition: New
Location: Maple Heights,OH,USA
7/8" CLOSED CELL BACKER ROD 850 FT APPLICATIONS: High moisture environments Ground based expansion joints General purpose sealant backing Use together ... morewith self-leveling sealant Highway joints Parking garages Around perimeters of door and window frames. Coping and glazing joints Log Home chinking Isolation joints DESCRIPTION: Round. Firm, resilient, polyethylene extruded closed celled foam with a water resistant outer skin. Provides controlled depth for sealants. Does not stick to sealants. Exceeds ASTM standards for bond breakering materials. No bond breaker is required. Very high moisture resistance. Will not absorb ground water. Compatible with all know types of sealants including butyl. Polyurethane, silicones, tri-polyimer, polysulfide, acrylic, etc. Allows Easy Control of Sealant Application Thickness Won't Adhere to Sealants- No Bond Breaker Needed Compatible with All Cold-Applied Sealants Easy To Install Closed Cell Backer Rod is a round. Flexible, closed cell polyethylene foam with an exterior"skin" used as a backing and thickness control device for elastomeric and other cold-applied sealants. The backer rod becomes an integral part of the joint into which it is installed. It limits the depth of the sealant, therefore preventing excessive use of sealants. Because the sealant will not bond to the"skin" of the rod, it can stretch and recover with joint movement, with minimal stress being put on the points of adhesion to the substrate. Proper size selection of Closed Cell Backer Rod is important as it controls the depth of the sealant bead. It must be oversized(25 percent) to fit tightly into the joint, and function as a bond breaker to prevent bottom-side adhesion of the sealant. It is compatible with cold-applied sealants and its round shape promotes the preferred"hour glass" shape for joint sealants. Being easily compressible, it withstands hot and cold temperature extremes from-45° to 160° F(43° to 71° C) It can withstand dynamic joint movement
$
17.77
Buy It Now
$0 Shipping
Condition: New
Location: Wyoming,MI,USA
$
80.99
Buy It Now
$0 Shipping
Condition: New
Location: Swanville,MN,USA
Butyl-Flex Gutter And Flashing Sealant. Butyl rubber formula provides a durable. Flexible, watertight seal for gutters, drainspouts, lap joints, flashings, ... moreroof vents, aluminum siding, and other metal joints. Stands up to weather and temperature extremes. Meets ASTM Spec. C-1085. 10.1 oz. cartridge. 12 Pack. All items listed have shipping for the Continental United States. For AK. HI, PR, APO/AFO and other Countries please check with us about the cost of shipping before ordering. Please see our About Me Page for more information about us, including Contact Information. We do our best to ensure the accuracy of every listings. Unfortunately, do to our high volume, mistakes sometimes occur. If you receive an item that is not as described in our listing, please contact us directly via phone or email within three(3) days of receiving the item and we will work to correct the issue. Nilson Hardware Swanville, MN.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13fad0c2af2-0x104-
$
6.7
Buy It Now
$5 Shipping
Condition: New
Location: USA
Store Categories. Click to close full size. For warranty information. HERCULES 15615 Real Tuff[TM] PTFE Thread Sealant.White G7500726. HERCULES. Item ... moreSpecifics. Item. Type. Application. Improves Seal on Threads. Color. White. Container Type. Can. For Use With. Aluminum. Black Iron, Brass, Copper, Glass, Monel, Natural Rubber, Plastic, PVC, ABS, CPVC, Stainless Steel and Synthetic Rubber. Includes. Brush in Cap. Item. Real Tuff(TM) PTFE Thread Sealant. Size. 4 fl. oz. Application Time. Immediate. Standards. ANSI/NSF61. FED SPEC TT-S-1732. Viscosity. Thixotropic Paste. Specific Gravity. 1.56. Performance Temp. Range. 200 Degrees to 550 Degrees F. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less than $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. UPS is our primary parcel carrier and we use a variety of carriers for LTL shipments. Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Zoro only accepts orders for shipments within the continental US. Orders to international destinations. Alaska and Hawaii will not be processed. Zoro does not ship to PO Box addresses. Returns If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting Zoro’ Customer Service Department at 855-BUY-ZORO(855-289-9676) or through Ebay Messaging. Our customer service hours are Monday through Friday from 7am to 7pm. And Saturdays 9am to 2pm(CT) Include a copy of the original order confirmation or
$
22.43
Buy It Now
$0 Shipping
Condition: New
Location: Sacramento,CA,USA
$
154
Buy It Now
$0 Shipping
Condition: New
Location: Maple Heights,OH,USA
2" Closed Cell Backer Rod 114 Ft. Closed Cell Backer Rod Closed Cell Backer Rod available in multiple diameters and lengths Meets ASTM C1330. ASTM ... moreD5249 For Use with Cold Applied Sealants Closed Cell Polyethylene Foam Nonimpregnated. Nonstaining, and nonbleeding Inert and does not adhere to sealants Meets all requirements of the 1990 Clean Air Act Is a"Domestic End Product" as defined by the Buy American Act. Title 41 USC 10 Closed cell backer rods are designed to limit the depth of sealants. Help the sealant assume an hourglass shape(which prolongs sealant life) and serve as a bond breaker to prevent bottom-side adhesion. Backer rods do not stain sealants, and are chemically inert. They are non-gassing, non-exuding, and virtually dust-free. Due to physical and chemical inert nature, backer rod is compatible with virtually all known cold sealants, including self-leveling sealants- butyl, polysulfide, acrylic polyurethane, silicone, and most other cold-applied sealants Diameter of Rod: 2" Feet per Roll: 114 Ft. Joint Preparation and Installation: Clean all joints. Remove any concrete form-release agents. Curing compound residue, laitance, and any other foreign materials. To ensure good bond. Joints must be clean and dry when the new sealant is installed. Air compressors must be equipped with traps for oil and moisture removal. Install backer rod at depth recommended by sealant manufacturer- use a blunt tool. Commonly used in expansion/contraction joints such as: Curtain Wall Partitions Bridge and Highway Construction Parking Decks Pre-Cast Assemblies Glazing Applications Panel Systems Part No: RLCCB2*International shipping is available. Please contact us for international shipping charges. By placing an order with LK Technologies. Inc. through eBay, you acknowledge and agree to the following conditions: PAYMENT POLICY- TechnologyLK accepts major credit cards via PayPal. We also accept Cashier's Checks and Bank Wire Transfers. Other payment options may be available- please contact us with an
$
45.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
8.29
Buy It Now
$8.79 Shipping
Condition: New
Location: USA
Basic Uses Recommended for exterior applications. CRL 777 Butyl Rubber Sealant features excellent adhesion to wood, masonry, glass, concrete, some plastics, ... moreand metal surfaces. Hidden areas, such as under sill cans, thresholds, and around screw heads are excellent applications. Other areas, such as between metal building panels, wall-mounted air conditioning units, under aluminum siding and gutters are all good applications for proven butyl sealants. Application temperature range is 40° to 120°F(4° to 49°C) Service temperature range is- 20° to 200°F(29° to 93°C) Paint time is 24 hours. Comparable Sealants CRL: 888. Adco: B-100. AP-77. DAP®: Butyl Flex. OSI®: SBR-100. Pecora®: BC-158. PTI: 757. PSI: 301. Tremco®: Butyl Sealant. Technical Data Meets Federal Specifications TT-S-001657. Type 1, TT-C-1796A, ASTM C 1311, and AAMA 808.3-05; USDA Certified. Limitations Not recommended for use in sealing horizontal decks. Patios, driveways or terrace joints where abrasion or physical abuse is encountered. Not recommended for use in window glazing applications or hidden joint details, which require a non-skinning, non-hardening sealant. CRL 777 has a solvent based curing system. A slight odor of mineral spirits will be detected during application, which is normal. Do not use where this odor may be objectionable, such as refrigeration units that will be stocked soon after construction. Check cartridge label and Specification Data Sheet for additional limitations. Color: Black, Contents of Cartridge: 11 fl oz(326 ml) Shelf Life: 12 months
$
123.99
Buy It Now
$0 Shipping
Condition: New
Location: Sarasota,FL,USA
$
34.99
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
21.51
Buy It Now
$4.99 Shipping
Condition: New
Location: Hollywood,FL,USA
CRL Gray 1/4" x 3/4" Double Sided Foam Glazing Tape. CRL Foam Glazing Tape is a closed-cell polyethylene foam sealant in tape form. The aggressive ... moreacrylic adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure. Adheres to wood. Vinyl, aluminum, and glass. It can be used as an exterior glazing sealant- particularly where glass repositioning is important before the final setting. Excellent Adhesion to Wood. Vinyl(Rigid PVC) Aluminum, and Glass Superior Resistance to Weathering. Oxidation, and UV Exposure Meets AAMA 810.1 Certification Aggressive Adhesive Service Temperature Range From- 40øF to 180øF(40øC to 82øC) Available in Gray and Black CRL Foam Glazing Tape is specifically designed to be a primary or secondary seal in a variety of glazing systems. It is self-shimming. So you don"t need shims or spacers. The tape is constructed with a patented cellular structured foam that is particularly resistant to weathering and water-absorption, while providing a superior long-lived seal. CRL FOAM GLAZING TAPE WITH ADHESIVE ON TWO SIDES HAS THE FOLLOWING FEATURES: Simplicity: Requires no clean-up. Easy to handle, no waste, requires no mixing or special application equipment. Preformed tape provides consistent and accurate application. No shim is required. Remains flexible at low temperatures and dimensionally stable at high temperatures. Special non-yellowing. Non-staining water-white adhesives provide a clean, aesthetic appearance. Superior resistance to weathering. Oxidation, and ultraviolet exposure. Seals effectively against water. Dust, and light. Variety of available sizes A minimum of 30% compression must be maintained to provide an effective moisture seal. In small lites. This may be achieved by applying pressure directly to the glazing tape when installing glazing stops. However, in most lites, the use of a compression wedge gasket is recommended. Apply with firm, uniform pressure to a clean, dry surface without stretching(the pape
$
72.11
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
19.95
Buy It Now
$4.99 Shipping
Condition: New
Location: Hollywood,FL,USA
CRL Gray 1/16" x 1/4" Double Sided Foam Glazing Tape. CRL Foam Glazing Tape is a closed-cell polyethylene foam sealant in tape form. The aggressive ... moreacrylic adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure. Adheres to wood. Vinyl, aluminum, and glass. It can be used as an exterior glazing sealant- particularly where glass repositioning is important before the final setting. Excellent Adhesion to Wood. Vinyl(Rigid PVC) Aluminum, and Glass Superior Resistance to Weathering. Oxidation, and UV Exposure Meets AAMA 810.1 Certification Aggressive Adhesive Service Temperature Range From- 40øF to 180øF(40øC to 82øC) Available in Gray and Black CRL Foam Glazing Tape is specifically designed to be a primary or secondary seal in a variety of glazing systems. It is self-shimming. So you don"t need shims or spacers. The tape is constructed with a patented cellular structured foam that is particularly resistant to weathering and water-absorption, while providing a superior long-lived seal. CRL FOAM GLAZING TAPE WITH ADHESIVE ON TWO SIDES HAS THE FOLLOWING FEATURES: Simplicity: Requires no clean-up. Easy to handle, no waste, requires no mixing or special application equipment. Preformed tape provides consistent and accurate application. No shim is required. Remains flexible at low temperatures and dimensionally stable at high temperatures. Special non-yellowing. Non-staining water-white adhesives provide a clean, aesthetic appearance. Superior resistance to weathering. Oxidation, and ultraviolet exposure. Seals effectively against water. Dust, and light. Variety of available sizes A minimum of 30% compression must be maintained to provide an effective moisture seal. In small lites. This may be achieved by applying pressure directly to the glazing tape when installing glazing stops. However, in most lites, the use of a compression wedge gasket is recommended. Apply with firm, uniform pressure to a clean, dry surface without stretching(the pap
$
11.95
Buy It Now
$0 Shipping
Condition: New
Location: Tracy,CA,USA
Dielectric Silicone Lubricant& Sealant 10 packs each 7 Grams(0.25oz) for total of 70 grams per listing Multi Use NEW Normal 0 PST-511 Silicone Lubricant& ... moreSealant FEATURES• Resistant to a wide range of chemicals; generally resistant to mineral oils. Vegetable oils, air, dilute acids, alkalines, most aqueous solutions and moisture• Serviceable consistency from-40 to 400°F(40 to 204°C) Practically nonvolatile and odorless• Resistant to a variety of organic and inorganic chemicals and oxidation• Electrically insulating• Excellent rubber lubrication with release and sealing properties• Comparable to Dow Corning ® 111 and Fuchs CHEMPLEX ® 825 COMPOSITION• Silicone oil• Inorganic thickener• Various additives APPLICATIONS• Rubber and plastic O-rings(non-silicone) Lubricant and sealing for distributor caps. Brake calipers and fuel pumps. Sealant for gaskets. Seals, vacuum and pressure systems, outdoor and marine applications; subject to washing and harsh environments• High voltage and underground electrical connections• Damping medium for dash pots in electrical equipment• Chemical barrier coating• Anti-stick and sealant for transformer gaskets and equipment• Water softener and faucet valves• Mold release where high temperature molds stick to dies and plates. PST-511 Silicone Lubricant& Sealant is a tacky. Tenacious silicone based grease designed to provide superior release and water washout property characteristics while maintaining the excellent dielectric properties inherent with silicone greases. It was designed as a lubricant for brake caliper slides and boosters as well as rubber O-rings and plastic parts. Is an excellent lubricant. Preventing O-rings from drying, cracking and becoming brittle in harsh environments. Offers superior moisture barrier capabilities. With excellent dielectric properties. TYPICAL PROPERTIES The values reported on this sheet should not solely be used for preparing specifications on this product. Please contact Polysi Technologies for assistance in preparing
$
48.62
Buy It Now
$0 Shipping
Condition: New
Location: Melrose,MA,USA
$
244.15
Buy It Now
$0 Shipping
Condition: New
Location: Maple Heights,OH,USA
1-1/2" Closed Cell Backer Rod 396 Ft. Closed Cell Backer Rod Closed Cell Backer Rod available in multiple diameters and lengths Meets ASTM C1330. ... moreASTM D5249 For Use with Cold Applied Sealants Closed Cell Polyethylene Foam Nonimpregnated. Nonstaining, and nonbleeding Inert and does not adhere to sealants Meets all requirements of the 1990 Clean Air Act Is a"Domestic End Product" as defined by the Buy American Act. Title 41 USC 10 Closed cell backer rods are designed to limit the depth of sealants. Help the sealant assume an hourglass shape(which prolongs sealant life) and serve as a bond breaker to prevent bottom-side adhesion. Backer rods do not stain sealants, and are chemically inert. They are non-gassing, non-exuding, and virtually dust-free. Due to physical and chemical inert nature, backer rod is compatible with virtually all known cold sealants, including self-leveling sealants- butyl, polysulfide, acrylic polyurethane, silicone, and most other cold-applied sealants Diameter of Rod: 1-1/2" Feet per Roll: 396 Ft. Joint Preparation and Installation: Clean all joints. Remove any concrete form-release agents. Curing compound residue, laitance, and any other foreign materials. To ensure good bond. Joints must be clean and dry when the new sealant is installed. Air compressors must be equipped with traps for oil and moisture removal. Install backer rod at depth recommended by sealant manufacturer- use a blunt tool. Commonly used in expansion/contraction joints such as: Curtain Wall Partitions Bridge and Highway Construction Parking Decks Pre-Cast Assemblies Glazing Applications Panel Systems Part No: RLCCB112B*International shipping is available. Please contact us for international shipping charges. By placing an order with LK Technologies. Inc. through eBay, you acknowledge and agree to the following conditions: PAYMENT POLICY- TechnologyLK accepts major credit cards via PayPal. We also accept Cashier's Checks and Bank Wire Transfers. Other payment options may be available- please contact
$
48.45
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
29.07
Buy It Now
$0 Shipping
Condition: New
Location: Pacifica,CA,USA
$
328.7
Buy It Now
$21.78 Shipping
Condition: New
Location: Hallandale,FL,USA
$
18.39
Buy It Now
$4.99 Shipping
Condition: New
Location: Hollywood,FL,USA
CRL Gray 1/4" x 3/4" Single Sided Foam Glazing Tape. CRL Foam Glazing Tape is a closed-cell polyethylene foam sealant in tape form. The aggressive ... moreacrylic adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure. Adheres to wood. Vinyl, aluminum, and glass. It can be used as an exterior glazing sealant- particularly where glass repositioning is important before the final setting. Excellent Adhesion to Wood. Vinyl(Rigid PVC) Aluminum, and Glass Superior Resistance to Weathering. Oxidation, and UV Exposure Meets AAMA 810.1 Certification Aggressive Adhesive Service Temperature Range From- 40øF to 180øF(40øC to 82øC) Available in Gray and Black CRL Foam Glazing Tape is specifically designed to be a primary or secondary seal in a variety of glazing systems. It is self-shimming. So you don"t need shims or spacers. The tape is constructed with a patented cellular structured foam that is particularly resistant to weathering and water-absorption, while providing a superior long-lived seal. Joints sealed with CRL Foam Glazing Tape with Adhesive on One Side can be opened and closed. Repositioned, and used without the sticky mess associated with sealants. Use this tape in demountable partitions, louvers, formwork, access panels, doors, and other operable or temporary joints. The non-adhesive face will release cleanly from most surfaces. When a joint is opened the tape recovers most of it original uncompressed thickness and is ready to be used again. CRL FOAM GLAZING TAPE WITH ADHESIVE ON ONE SIDE HAS THE FOLLOWING FEATURES: Simplicity: Requires no clean-up. Easy to handle, no waste, requires no mixing or special application equipment. Preformed tape provides consistent and accurate application. No shim is required. Remains flexible at low temperatures and dimensionally stable at high temperatures. Special non-yellowing. Non-staining water-white adhesives provide a clean, aesthetic appearance. Superior resistance to weathering. Oxidation, and ul
$
38.95
Buy It Now
$0 Shipping
Condition: New
Location: Irvine,CA,USA
$
16.39
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
14.02
Buy It Now
$4.99 Shipping
Condition: New
Location: Hollywood,FL,USA
CRL Gray 1/4" x 3/4" Single Sided Foam Glazing Tape. CRL Foam Glazing Tape is a closed-cell polyethylene foam sealant in tape form. The aggressive ... moreacrylic adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure. Adheres to wood. Vinyl, aluminum, and glass. It can be used as an exterior glazing sealant- particularly where glass repositioning is important before the final setting. Excellent Adhesion to Wood. Vinyl(Rigid PVC) Aluminum, and Glass Superior Resistance to Weathering. Oxidation, and UV Exposure Meets AAMA 810.1 Certification Aggressive Adhesive Service Temperature Range From- 40øF to 180øF(40øC to 82øC) Available in Gray and Black CRL Foam Glazing Tape is specifically designed to be a primary or secondary seal in a variety of glazing systems. It is self-shimming. So you don"t need shims or spacers. The tape is constructed with a patented cellular structured foam that is particularly resistant to weathering and water-absorption, while providing a superior long-lived seal. Joints sealed with CRL Foam Glazing Tape with Adhesive on One Side can be opened and closed. Repositioned, and used without the sticky mess associated with sealants. Use this tape in demountable partitions, louvers, formwork, access panels, doors, and other operable or temporary joints. The non-adhesive face will release cleanly from most surfaces. When a joint is opened the tape recovers most of it original uncompressed thickness and is ready to be used again. CRL FOAM GLAZING TAPE WITH ADHESIVE ON ONE SIDE HAS THE FOLLOWING FEATURES: Simplicity: Requires no clean-up. Easy to handle, no waste, requires no mixing or special application equipment. Preformed tape provides consistent and accurate application. No shim is required. Remains flexible at low temperatures and dimensionally stable at high temperatures. Special non-yellowing. Non-staining water-white adhesives provide a clean, aesthetic appearance. Superior resistance to weathering. Oxidation, and ul
$
44.5
Buy It Now
$12.5 Shipping
Condition: New
Location: Southington,CT,USA
$
139.99
Buy It Now
$0 Shipping
Condition: New
Location: Maple Heights,OH,USA
1/4" Closed Cell Backer Rod 2.000 Ft. Closed Cell Backer Rod Closed Cell Backer Rod available in multiple diameters and lengths Meets ASTM C1330. ... moreASTM D5249 For Use with Cold Applied Sealants Closed Cell Polyethylene Foam Nonimpregnated. Nonstaining, and nonbleeding Inert and does not adhere to sealants Meets all requirements of the 1990 Clean Air Act Is a"Domestic End Product" as defined by the Buy American Act. Title 41 USC 10 Closed cell backer rods are designed to limit the depth of sealants. Help the sealant assume an hourglass shape(which prolongs sealant life) and serve as a bond breaker to prevent bottom-side adhesion. Backer rods do not stain sealants, and are chemically inert. They are non-gassing, non-exuding, and virtually dust-free. Due to physical and chemical inert nature, backer rod is compatible with virtually all known cold sealants, including self-leveling sealants- butyl, polysulfide, acrylic polyurethane, silicone, and most other cold-applied sealants Diameter of Rod: 1/4" Feet per Roll: 2.000 Ft. Joint Preparation and Installation: Clean all joints. Remove any concrete form-release agents. Curing compound residue, laitance, and any other foreign materials. To ensure good bond. Joints must be clean and dry when the new sealant is installed. Air compressors must be equipped with traps for oil and moisture removal. Install backer rod at depth recommended by sealant manufacturer- use a blunt tool. Commonly used in expansion/contraction joints such as: Curtain Wall Partitions Bridge and Highway Construction Parking Decks Pre-Cast Assemblies Glazing Applications Panel Systems Part No: RLCCB14H*International shipping is available. Please contact us for international shipping charges. By placing an order with LK Technologies. Inc. through eBay, you acknowledge and agree to the following conditions: PAYMENT POLICY- TechnologyLK accepts major credit cards via PayPal. We also accept Cashier's Checks and Bank Wire Transfers. Other payment options may be available- please contact
$
61.18
Buy It Now
$0 Shipping
Condition: New
Location: USA
$
77.99
Buy It Now
$0 Shipping
Condition: New – Open box
Location: Chillicothe,MO,USA
$
34.33
Buy It Now
$4.99 Shipping
Condition: New
Location: Hollywood,FL,USA
CRL Gray 1/4" x 3/4" Single Sided Foam Glazing Tape. CRL Foam Glazing Tape is a closed-cell polyethylene foam sealant in tape form. The aggressive ... moreacrylic adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure. Adheres to wood. Vinyl, aluminum, and glass. It can be used as an exterior glazing sealant- particularly where glass repositioning is important before the final setting. Excellent Adhesion to Wood. Vinyl(Rigid PVC) Aluminum, and Glass Superior Resistance to Weathering. Oxidation, and UV Exposure Meets AAMA 810.1 Certification Aggressive Adhesive Service Temperature Range From- 40øF to 180øF(40øC to 82øC) Available in Gray and Black CRL Foam Glazing Tape is specifically designed to be a primary or secondary seal in a variety of glazing systems. It is self-shimming. So you don"t need shims or spacers. The tape is constructed with a patented cellular structured foam that is particularly resistant to weathering and water-absorption, while providing a superior long-lived seal. Joints sealed with CRL Foam Glazing Tape with Adhesive on One Side can be opened and closed. Repositioned, and used without the sticky mess associated with sealants. Use this tape in demountable partitions, louvers, formwork, access panels, doors, and other operable or temporary joints. The non-adhesive face will release cleanly from most surfaces. When a joint is opened the tape recovers most of it original uncompressed thickness and is ready to be used again. CRL FOAM GLAZING TAPE WITH ADHESIVE ON ONE SIDE HAS THE FOLLOWING FEATURES: Simplicity: Requires no clean-up. Easy to handle, no waste, requires no mixing or special application equipment. Preformed tape provides consistent and accurate application. No shim is required. Remains flexible at low temperatures and dimensionally stable at high temperatures. Special non-yellowing. Non-staining water-white adhesives provide a clean, aesthetic appearance. Superior resistance to weathering. Oxidation, and ul
$
20.31
Buy It Now
Free Shipping
Condition: New
Location: United Kingdom
$
30.32
Buy It Now
$4.99 Shipping
Condition: New
Location: Hollywood,FL,USA
CRL Gray 1/16" x 1/2" Double Sided Foam Glazing Tape. CRL Foam Glazing Tape is a closed-cell polyethylene foam sealant in tape form. The aggressive ... moreacrylic adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure. Adheres to wood. Vinyl, aluminum, and glass. It can be used as an exterior glazing sealant- particularly where glass repositioning is important before the final setting. Excellent Adhesion to Wood. Vinyl(Rigid PVC) Aluminum, and Glass Superior Resistance to Weathering. Oxidation, and UV Exposure Meets AAMA 810.1 Certification Aggressive Adhesive Service Temperature Range From- 40øF to 180øF(40øC to 82øC) Available in Gray and Black CRL Foam Glazing Tape is specifically designed to be a primary or secondary seal in a variety of glazing systems. It is self-shimming. So you don"t need shims or spacers. The tape is constructed with a patented cellular structured foam that is particularly resistant to weathering and water-absorption, while providing a superior long-lived seal. CRL FOAM GLAZING TAPE WITH ADHESIVE ON TWO SIDES HAS THE FOLLOWING FEATURES: Simplicity: Requires no clean-up. Easy to handle, no waste, requires no mixing or special application equipment. Preformed tape provides consistent and accurate application. No shim is required. Remains flexible at low temperatures and dimensionally stable at high temperatures. Special non-yellowing. Non-staining water-white adhesives provide a clean, aesthetic appearance. Superior resistance to weathering. Oxidation, and ultraviolet exposure. Seals effectively against water. Dust, and light. Variety of available sizes A minimum of 30% compression must be maintained to provide an effective moisture seal. In small lites. This may be achieved by applying pressure directly to the glazing tape when installing glazing stops. However, in most lites, the use of a compression wedge gasket is recommended. Apply with firm, uniform pressure to a clean, dry surface without stretching(the pap
$
48.09
Buy It Now
$0 Shipping
Condition: New
Location: Phoenix,AZ,USA
$
114.95
Buy It Now
$12.5 Shipping
Condition: New
Location: Southington,CT,USA
$
22.61
Buy It Now
$4.99 Shipping
Condition: New
Location: Hollywood,FL,USA
CRL Black 1/8" x 3/4" Single Sided Foam Glazing Tape. CRL Foam Glazing Tape is a closed-cell polyethylene foam sealant in tape form. The aggressive ... moreacrylic adhesive is formulated to position the foam on curved or irregular surfaces with the slightest pressure. Adheres to wood. Vinyl, aluminum, and glass. It can be used as an exterior glazing sealant- particularly where glass repositioning is important before the final setting. Excellent Adhesion to Wood. Vinyl(Rigid PVC) Aluminum, and Glass Superior Resistance to Weathering. Oxidation, and UV Exposure Meets AAMA 810.1 Certification Aggressive Adhesive Service Temperature Range From- 40øF to 180øF(40øC to 82øC) Available in Gray and Black CRL Foam Glazing Tape is specifically designed to be a primary or secondary seal in a variety of glazing systems. It is self-shimming. So you don"t need shims or spacers. The tape is constructed with a patented cellular structured foam that is particularly resistant to weathering and water-absorption, while providing a superior long-lived seal. Joints sealed with CRL Foam Glazing Tape with Adhesive on One Side can be opened and closed. Repositioned, and used without the sticky mess associated with sealants. Use this tape in demountable partitions, louvers, formwork, access panels, doors, and other operable or temporary joints. The non-adhesive face will release cleanly from most surfaces. When a joint is opened the tape recovers most of it original uncompressed thickness and is ready to be used again. CRL FOAM GLAZING TAPE WITH ADHESIVE ON ONE SIDE HAS THE FOLLOWING FEATURES: Simplicity: Requires no clean-up. Easy to handle, no waste, requires no mixing or special application equipment. Preformed tape provides consistent and accurate application. No shim is required. Remains flexible at low temperatures and dimensionally stable at high temperatures. Special non-yellowing. Non-staining water-white adhesives provide a clean, aesthetic appearance. Superior resistance to weathering. Oxidation, and u
$
14.99
Buy It Now
$0 Shipping
Condition: New
Location: Fontana,CA,USA
$
145.95
Buy It Now
$0 Shipping
Condition: New
Location: Maple Heights,OH,USA
1" Closed Cell Backer Rod 600 Ft. Closed Cell Backer Rod Closed Cell Backer Rod available in multiple diameters and lengths Meets ASTM C1330. ASTM ... moreD5249 For Use with Cold Applied Sealants Closed Cell Polyethylene Foam Nonimpregnated. Nonstaining, and nonbleeding Inert and does not adhere to sealants Meets all requirements of the 1990 Clean Air Act Is a"Domestic End Product" as defined by the Buy American Act. Title 41 USC 10 Closed cell backer rods are designed to limit the depth of sealants. Help the sealant assume an hourglass shape(which prolongs sealant life) and serve as a bond breaker to prevent bottom-side adhesion. Backer rods do not stain sealants, and are chemically inert. They are non-gassing, non-exuding, and virtually dust-free. Due to physical and chemical inert nature, backer rod is compatible with virtually all known cold sealants, including self-leveling sealants- butyl, polysulfide, acrylic polyurethane, silicone, and most other cold-applied sealants Diameter of Rod: 1" Feet per Roll: 600 Ft. Joint Preparation and Installation: Clean all joints. Remove any concrete form-release agents. Curing compound residue, laitance, and any other foreign materials. To ensure good bond. Joints must be clean and dry when the new sealant is installed. Air compressors must be equipped with traps for oil and moisture removal. Install backer rod at depth recommended by sealant manufacturer- use a blunt tool. Commonly used in expansion/contraction joints such as: Curtain Wall Partitions Bridge and Highway Construction Parking Decks Pre-Cast Assemblies Glazing Applications Panel Systems Part No: RLCCB1B*International shipping is available. Please contact us for international shipping charges. By placing an order with LK Technologies. Inc. through eBay, you acknowledge and agree to the following conditions: PAYMENT POLICY- TechnologyLK accepts major credit cards via PayPal. We also accept Cashier's Checks and Bank Wire Transfers. Other payment options may be available- please contact us with a
$
79.95
Buy It Now
$0 Shipping
Condition: New
Location: Decorah,IA,USA
$
23.06
Buy It Now
$0 Shipping
Condition: New
Location: United Kingdom
Visit Our Shop Roof& Gutter Sealant is a premium quality butyl based sealant and adhesive that provides instant. Permanent weather-proofing to a wide ... morevariety of roofing applications. Adheres to most common roofing materials such as bitumen, asphalt, felt, metals and wood. BENEFITS- Incorporates polymer additives to improve adhesion. Can be applied in wet conditions. Even under heavy rain. Semi-drying- remains permanently elastic beneath surface skin. High solids formulation- excellent gap filling properties without shrinkage. Excellent external weathering properties. AREAS FOR USE- Fills and seals gaps/cracks in most roofing applications. Bonds to: concrete. Roofing felt, lead, zinc and masonry. For bedding tiles. Slates and flashing into position. Joint sealing on gutters and down pipes. Sticking down loose roofing felt. Joint sealing between corrugated asbestos cement and iron sheeting etc. Part Number, EVBROOFBL, Brand, Everbuild, Pack Quantity, 1, Category, Abrasives. Fillers, Sealants& Lubricants, Not Satisfied With Your Purchase? We aim to make every transaction a FIVE STAR experience. However if you do not feel confident about leaving a positive FIVE STAR rating please contact us! You can contact us at anytime through the eBay messaging system or call us directly- 0844 800 5199 | 01924 496111 and give us the opportunity to correct any problems or concerns you may have. Need To Return An Item? For returns please log a return on our Online Returns System at http:returns.apmotorstore.co.uk. We accept returns on all unused items in their original packaging within 14 days of purchase. If you have bought the item incorrectly we cannot refund P&P costs. For damaged or warranty items please call us on 0844 800 5199 | 01924 496111. AP Motor Store is a fast and efficient Internet-based mail-order company specialising in aftermarket performance& service parts for car enthusiasts. By using an online ordering system we can keep our overheads low and pass the savings directly on to you- the
1 2 3 4 5 6 7 8
 In