|
18" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron
18" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron 18" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron. The discharge and tooling are adjustable and feed out with the part hanging by the head. It is a max overall of 18" It can be made to feed other parts. Units is 110v. Buyer is buying the unit as seen as is. We have over 500 used vibratory feeders bowls in stock for almost any aplication of automation. We can retool this unit or build new ones also. Unit does power up and runs fine. You will need to tool the unit for your part or have us do it for a charge. Unit has a control built in. Unit mut ship freight or needs to be picked up. If frieght it will have a $25 shid fee. We offer many vibratory Feeder Services. Service on Feeding Equipment, Refurbishing, Replacement or Re-tooling, ... moreRetrofitting and new turnkey systems. We have the largest inventory of used Vibratory Feeders you will ever find. If you have any questions regarding the above units please contact us at Feeding Concepts Inc. 317-773-2040 or email us at READ BELOW BEFORE BIDDING: You are buying the above as is as. This means don't assume anything. If you have questions ask. If it’s not listed as new in the box then don't think it is. It’s sold as seen as is. Even if the unit has been tested or removed from a working machine. Payment: PAYPAL ONLY We will ship using our ups account within three days only in the USA. All other areas will ship USPS and we will ship on Saturdays only so it could be up to 6 days depending when you buy the unit. ALmost all items were removed from a working machine but are sold as is. Feedback: We will post POS feedback withen 30 days of your purchase. If a threat of Negative. feedback is used to get something that was not listed or service not listed we will forward the request to EBAY without notice to the buyer. On Jan-18-13 at 14:05:04 PST. Seller added the following information:
|
|
|
18"-24" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron
18"24" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron 18"24" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron. The discharge and tooling are adjustable and feed out with the part hanging by the head. It is a max overall of 18" It can be made to feed other parts. Units is 110v. Buyer is buying the unit as seen as is. We have over 500 used vibratory feeders bowls in stock for almost any aplication of automation. We can retool this unit or build new ones also. Unit does power up and runs fine. You will need to tool the unit for your part or have us do it for a charge. Unit has a control built in. Unit mut ship freight or needs to be picked up. If frieght it will have a $25 shid fee. We offer many vibratory Feeder Services. Service on Feeding Equipment, Refurbishing, Replacement ... moreor Re-tooling, Retrofitting and new turnkey systems. We have the largest inventory of used Vibratory Feeders you will ever find. If you have any questions regarding the above units please contact us at Feeding Concepts Inc. 317-773-2040 or email us at READ BELOW BEFORE BIDDING: You are buying the above as is as. This means don't assume anything. If you have questions ask. If it’s not listed as new in the box then don't think it is. It’s sold as seen as is. Even if the unit has been tested or removed from a working machine. Payment: PAYPAL ONLY We will ship using our ups account within three days only in the USA. All other areas will ship USPS and we will ship on Saturdays only so it could be up to 6 days depending when you buy the unit. ALmost all items were removed from a working machine but are sold as is. Feedback: We will post POS feedback withen 30 days of your purchase. If a threat of Negative. feedback is used to get something that was not listed or service not listed we will forward the request to EBAY without notice to the buyer. On Jan-18-13 at 14:05:04 PST. Seller added the following information:
|
|
|
15-18" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron
15-18" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron 15-18" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron. The discharge and tooling are adjustable and feed out with the part hanging by the head. It is a max overall of 18" It can be made to feed other parts. Units is 110v. Buyer is buying the unit as seen as is. We have over 500 used vibratory feeders bowls in stock for almost any aplication of automation. We can retool this unit or build new ones also. Unit does power up and runs fine. You will need to tool the unit for your part or have us do it for a charge. Unit has a control built in. Unit mut ship freight or needs to be picked up. If frieght it will have a $25 shid fee. We offer many vibratory Feeder Services. Service on Feeding Equipment, Refurbishing, Replacement or Re-tooling, ... moreRetrofitting and new turnkey systems. We have the largest inventory of used Vibratory Feeders you will ever find. If you have any questions regarding the above units please contact us at Feeding Concepts Inc. 317-773-2040 or email us at READ BELOW BEFORE BIDDING: You are buying the above as is as. This means don't assume anything. If you have questions ask. If it’s not listed as new in the box then don't think it is. It’s sold as seen as is. Even if the unit has been tested or removed from a working machine. Payment: PAYPAL ONLY We will ship using our ups account within three days only in the USA. All other areas will ship USPS and we will ship on Saturdays only so it could be up to 6 days depending when you buy the unit. ALmost all items were removed from a working machine but are sold as is. Feedback: We will post POS feedback withen 30 days of your purchase. If a threat of Negative. feedback is used to get something that was not listed or service not listed we will forward the request to EBAY without notice to the buyer. On Jan-18-13 at 14:05:04 PST. Seller added the following information:
|
|
|
24" 36" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron
24" 36" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron 24" 36" Vibratory Parts Feeder Bowl Nail Screw bolt stud Feeder FMC Syntron This unit was built to feed large studs or nails. The discharge and tooling are adjustable and feed out with the part hanging by the head. It is a max overall of 36" It can be made to feed other parts. Units is 110v. Buyer is buying the unit as seen as is. We have over 500 used vibratory feeders bowls in stock for almost any aplication of automation. We can retool this unit or build new ones also. Unit does power up and runs fine. You will need to tool the unit for your part or have us do it for a charge. Unit has a control built in. Unit mut ship freight or needs to be picked up. If frieght it will have a $25 shid fee. We offer many vibratory Feeder Services. Service ... moreon Feeding Equipment, Refurbishing, Replacement or Re-tooling, Retrofitting and new turnkey systems. We have the largest inventory of used Vibratory Feeders you will ever find. If you have any questions regarding the above units please contact us at Feeding Concepts Inc. 317-773-2040 or email us at READ BELOW BEFORE BIDDING: You are buying the above as is as. This means don't assume anything. If you have questions ask. If it’s not listed as new in the box then don't think it is. It’s sold as seen as is. Even if the unit has been tested or removed from a working machine. Payment: PAYPAL ONLY We will ship using our ups account within three days only in the USA. All other areas will ship USPS and we will ship on Saturdays only so it could be up to 6 days depending when you buy the unit. ALmost all items were removed from a working machine but are sold as is. Feedback: We will post POS feedback withen 30 days of your purchase. If a threat of Negative. feedback is used to get something that was not listed or service not listed we will forward the request to EBAY without notice to the buyer. On Jan-18-13 at 14:05:04 PST. Seller added the following information:
|
|
|
SYNTRON PAPER JOGGER MODEL J-1-B ; MADE IN UNITED STATES OF AMERICA
You are bidding on a SYNTRON PAPER JOGGER MODEL J-1-B. SYNTRON PAPER JOGGER MODEL J-1-B. Serial number GPJ613048. Made in the United States of America. Volts: 115; Hz 60; Amps 1.0 This Syntron Paper Jogger was in a lot of goods purchased by the seller at an estate sale. Seller has no information on the history of this particular jogger or the extent of its use. At bid is the Syntron Paper Jogger Model J-1-B. No original packaging and no other accessories of any kind. The jogger is used. Seller tested the jogger and found it worked on all speeds. The jogger shows normal wear associated with normal use. Please use the zoom function on the listing photos and judge condition for yourself. The jogger is heavy. Please check the shipping cost before bidding. SYNTRON PAPER JOGGER MODEL J-1-B. Good luck in your bidding! Payment by Paypal must be received ... morewithin five days after close of auction. Positive feedback will be reciprocated. Please check my other auctions! New items every Sunday! Pre-Owned Books Make Unique Gifts!
|
|
|
Syntron Vibratory Parts Feeder Bowl EB01D - last one available
you are buying the Syntron Vibratory Feeder Bowl seen in pics. bowl diameter is 17.5" We had six of these from the mfg line. this is the last one. this came from a local fab shop that closed. they manufactured pharmaceutical equipment. unit is in working condition. it is in clean shape as seen. we tested it with some of the product they had in it. worked fine. the knob dial to increase or decrease the amount of vibration has gone missing in transit. the post is still there as pictured and functions fine. this unit will need to be shipped freight or local pickup since it weighs nearly 100# we don't believe that it will travel well regular ground through ups. Usps, or fedex. we will box, band to a skid no charge. SHIPPING IS NOT FREE as may show in ebay ad. buyer is responsible for all freight arrangements and payment for shipping ... moreto the carrier of their choice. we can assist with our broker at freightquote.com if necessary. shipping info: 25"x28"x22"h 125# shipping from zip 15901. it typically has cost about $200 to ship this to the east coast or midwest It is the sole responsibility of the buyer to verify all aspects of the machine tool. Descriptions, specifications, condition, and suitability of intended usage. Inspection is welcome by appointment. We are liquidators, not dealers, consequently no warranties or guarantees exists. Ask any questions prior to bidding knowing our knowledge of this equipment may be limited. We consider sales final with no returns. Payment must be received within 3 days of the end of the auction.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1405cc096a9-0x106-
|
|
|
FMC Syntron PowerPulse 225484-A Electric Controller & Vibrating Feeder FCO-C
This FMC Syntron PowerPulse 225484-A Electric Controller& Vibrating Feeder FCO-C is in real good condition and guaranteed to functions 100% It came from a local lab that was upgrading equipment and we can accept pay pal or your credit card. Please contact me with any questions. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1405dfa5444-0x103-
|
|
|
Syntron Magnetic Feeder F-010-B w/ FMC Electric Controller CSCR-1B-1
Description Excellent used Syntron Electric Controller w/ Magnetic Feeder FMC Syntron Controller Model CSCR-1B-1 Volt 115 Hz. 50/60 Amps 5.0 Serial K31337 Magnetic Feeder Model F-010-B Volts 115. Hz. 60, Amps 2.0 Serial PP67511 Tested Works Great No tray on feeder. Removed from working enviroment. Check out my! Ready for work. Payment We accept the following pay methods from USA Buyers Credit Cards Visa. Discover and Master Card also you may use Pay Pal"the safe way to pay" International Buyers we accept Pay Pal. We may also except payment on pick up. Please set up a appointment if picking up your item 574 936 8351. What to expect once you pay for your item. Product will ship within 5 business days. You will receive a tracing number check your email. Look for a follow up letter once you receive your item. Shipping Fabitwelding Ships ... morewithin the USA. Canada and Worldwide. Not sure that we ship to your area email ask the seller a question. Free shipping is only offered to the USA. Our shipping carriers for packages are UPS ground and USPS Priority mail for packages. If you the buyer would like your package overnight let us know(buyer is responsible for the overnight shipping cost) When boxing and packing items I use 2" foam inside my boxes to protect item. Smaller items get a foam wrap around item. Freight Ships UPS Freight Ltl. or Freightquote.com. You the buyer may also use your freight carrier if you wish. I will work with you to get the best rate available. Please email ask the seller a question to get a freight quote include your zipcode. Item shipping freight Fabitwelding uses the regular skid size 36" x 48" Items shipping freight will have a 30.00 skid fee added in. Item’s that need crated you will be charged an additional 50.00. International buyer items shipping freight we need to get a shipping quote for you due to the high cost and delivery time it takes to arrive to your country.Please send you Zipcode for a quote. Please ask the seller a question at the bottom of the page or cal
|
|
|
1-FMC Syntron Electromagnetic Vibrating table VP-51-D1 deck 20"x20"-demo video
This vibrating table is 100% working. I got it from an estate sale. I called FMC Syntron and found out it is a current model and sells for about $2600. Here are 2 links with the PDF manual and specs. and and here is a video of it in action. I actually have 2 of these tables and the winning bidder can buy for the same price. The second unit. But this sale is just for 1 unit. Now about shipping. This unit weighs 190 pounds. I live in Central New York and you can pick it up for free. If you want it shipped, you can arrange for a truck to pick it up. It would go on without a box. If you want to talk about this unit, I will email you my phone number. I don't know a lot about the vibrating tables,but perhaps I could look at them and answer any questions. Also if you are picking them up, you can pay me cash, here, after you check them out. If ... moreyou decide against the sale, I will cancel it on Ebay.Thanks,Kevin.
|
|
|
Syntron J-1-B Paper Mail Jogger Jogging Machine Variable Speed Great Shape
You're bidding on this very nice. Used Sytron model J-1-B, variable speed paper jogger. It shows light normal signs of use but no abuse. Fully functional and ready to go to work for you. Please e-mail me with any questions. Thanks for looking.
|
|
|
FMC SYNTRON J1B J-1-B SPECIAL TWO POCKET TILT RACK CHECK PAPER JOGGER 212194-B
TESTING& FUNCTIONAL NOTES: This item was thoroughly tested and is in good working condition. The items for sale are Guaranteed Working! Bid with confidence! REPLACEMENT or MONEY BACK GUARANTEE: When you receive a Guaranteed item from OC Depot. It should perform as described. In the rare situation that this is not the case, we will send a replacement upon safe return of the original item within 14 days of receiving the item. If a replacement is not available we will honor the terms of our Money-Back Guarantee. COMPONENTS INCLUDED IN THIS AUCTION: 1) FMC SYNTRON J1B J-1-B SPECIAL TWO POCKET TILT RACK CHECK PAPER JOGGER 212194-B• 1) INTEGRATED POWER CABLE Unless stated otherwise. Accessories such as Power Cords, Software, AC Adapters, and/or other Cables are not included. COSMETIC NOTES: This listing is for used item in acceptable cosmetic ... morecondition with scuffs and scratches associated with normal use. The items for sale are Guaranteed Working! Bid with confidence! Please Click Here and Read Our Sales Policies at" at" src="http:ocdepot.com/template/Rounded_Middle_Right.gif" at" src="http:ocdepot.com/template/Rounded_Left_Bottom.gif" at" at" src="http:ocdepot.com/template/Rounded_Middle_Bottom.gif" at" src="http:ocdepot.com/template/Rounded_Right_Bottom.gif" SearchBy8- 52970 | Location: Z22 | Lister: Andy | Tester: Andy | Tech: | Quan: 1 | List: 1 | Duplicate: False | Plan: Q1 5 pounds or more | Amazon: Size: 0x0x0 Weight: 31 | Start: $99.99 | BIN: $0.00 | Type: Auction | $hippingBump: $0 | Date: 8/7/2013 | Condition: Used | CONSIGNOR VIDE O | RESEARCH LINK | Created: 8/7/2013 | Business& Industrial Printing& Graphic Arts Bindery& Finishing Equipment Paper Joggers Powered by
|
|
|
syntron rectifier ss-0450-b 5p50-0058
syntron rectifier ss-0450-b 5p50-0058
|
|
|
USED FMC SYNTRON ELECTROMAGNETIC VIBRATOR - MODEL V51
ITEM# 12074 USED FMC SYNTRON ELECTROMAGNETIC VIBRATOR- MODEL V51 CUSHIONED IMPACT TYPE VIBRATOR. TWO-BOLT ATTACHMENT, SERIAL NUMBERS: 720966& 720967, 115 VOLT, 60HZ, 4.5AMPS. PRICED EACH. CONTACT US FOR MORE INFORMATION. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at ... moreyour earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
FMC Syntron SCR-1B SC1B SCR 1B Electric Controller Free Ship
FMC Syntron Electric Controller Part Number: SCR-1B Part Number: SCR1B Part Number: SCR 1B Free Shipping All 50 States, Guam And Puerto Rico World Wide Shipping Available On All Our Products. Email Us For A Reduced Shipping Quote. We Deduct The Cost Of What We Account For Free Shipping In The USA. We Have A 10.000 Square Foot Showroom And A 35.000 Square Foot Warehouse Of Unusual Items. Please Contact Us With Your Wish List. We May Have The Item. We Are Also Available To Answer Any Other Questions. Shipping: Items Are Shipped Via; USPS. Fedex SmartPost, Fedex Ground, Freight Or Trucking, Depending On The Size And Weight Of The Item Purchased. Local Pickup You May Pickup Any Item And Shipping Charges Will Be Waived. Maryland 6% Tax Will Be Charged, For Maryland Residents And Local Pickup. International Shipping Charges, Do Not Include Customs ... moreOr Brokers Fee's. If Any. Powered by
|
|
|
1954 Syntron Model 25 Electric Hammer
Here is a 1954 Syntron heavy duty electric hammer. It is model 25. It works and comes with all you see in the pictures. Including metal case and bits/chisels,hammers,etc. It is very heavy, and will be shipped in two boxes. Shipping is included with the buy it now price. Style is 1954S, 60 CY, 15 amps. Everything is in good shape. The case is still solid, with some graphics remaining. Cords are all excellent, as is the hammer itself. Email questions. Thanks for looking. Have a great week!
|
|
|
FMC SYNTRON VIBRA-FLOW VIBRATOR MODEL V-4-AC
FMC CORPORATION SYNTRON VIBRA-FLOW Vibrator Model V-4-AC 115 VOLTS. BENCH TESTED. IT WORKS. Unit stored for years. Very good condition Posted with
|
|
|
Syntron Magnetic Parts Feeder 17" bowl
This is One(1)Syntron Magnetic Parts Feeder. We used it on 2" pallet nails for an R& D project. The bowl is a 17" wide one Made by FMC corp. dated 11/00. Style# B49744. The base is Mod# EB-112. 230 VAC. SR# PHMP04712 Dated 11/00 RC. We are selling One here but if you need more we have 3 to sell. This is a new ebay account and we have been in business since 1982' Please leave a good comment. Just ask about anything and I should get back to you the next working day. Sales within the USA only! Thank you Dan Rayco Ind. 1502 Valley Rd Richmond. VA.
|
|
|
LOT 2 FMC SYNTRON F-TO C MAGNETIC VIBRATORY FEEDERS
LOT 2 FMC SYNTRON F-TO C MAGNETIC VIBRATORY FEEDERS. We have(2) used. FMC Syntron F-TO C, Magnetic Vibratory Feeders. They have all been tested and are in working condition. The winner can choose which unit they prefer. Based on the numbers, 1-2 photographed below. Items will be shipped via FedEx Ground Delivery. Fully insured with tracking. Items will be packaged well for security in transit. Items can also be picked-up in person. Pl ease check our feedback and bid with confidence. Please check out our other auctions as well. Including other parts, accessories, and machinery. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-1413f19b4a4-0xfd-
|
|
|
LOT 3 FMC SYNTRON F-T01 A MAGNETIC VIBRATORY FEEDERS
LOT 3 FMC SYNTRON F-T01 A MAGNETIC VIBRATORY FEEDERS. We have(3) used. FMC Syntron F-T01 A, Magnetic Vibratory Feeders. They have all been tested and are in working condition. The winner can choose which unit they prefer. Based on the numbers, 1-3 photographed below. Items will be shipped via FedEx Ground Delivery. Fully insured with tracking. Items will be packaged well for security in transit. Items can also be picked-up in person. Pl ease check our feedback and bid with confidence. Please check out our other auctions as well. Including other parts, accessories, and machinery.
|
|
|
SYNTRON RV2-450 ROTARY VIBRATOR 230/460VAC 1.2/.06 AMP 3 PHASE 3600 RPM
SYNTRON RV2-450 ROTARY VIBRATOR 230/460VAC 1.2/06 AMP 3 PHASE 3600 RPM REBUILT BY INDUSTRIAL ELECTRIC SERVICE CO.
|
|
|
SYNTRON RV136A RV 136A ROTARY VIBRATOR 230VAC .35 AMP 3 PHASE
SYNTRON RV136A RV 136A ROTARY VIBRATOR 230VAC.35 AMP 3 PHASE USED- UNABLE TO TEST- PRICED ACCORDINGLY
|
|
|
Syntron Magnetic Parts Feeder Model F-010 B 115 VAC 2 Amps FMC Corp
Syntron Magnetic Parts Feeder. Model: F-010 B Sn: CC-67707 12/82 Approximate Bowl size: 24" Diameter X 12" Deep. Fin width: 1 3/4" Approximate Size: 52" X 49" X 70" High. Approximate weight: 1700 Pounds. We have forklift and loading dock and will assist in loading your truck. Freight and insurance to be arranged by customer. Crating is available at additional expense. We will quote at time of sale.
|
|
|
Syntron Magnetic Parts Feeder Model EB142 115 VAC 8 Amps FMC Corp Allen Bradley
Syntron Magnetic Parts Feeder. Model: EB142 Sn: 723204/AC/2/91 Approximate Bowl size: 15" Diameter X 8" Deep. Fin width: 1 1/4" Approximate Size: 46" X 48" X 48" High. Approximate weight: 1700 Pounds. We have forklift and loading dock and will assist in loading your truck. Freight and insurance to be arranged by customer. Crating is available at additional expense. We will quote at time of sale.
|
|
|
SYNTRON FMC PARTS FEEDER MODEL F010-B VIBERATING BOWL FEEDER ,GOLD MINING
THIS FEEDER IS IN WORKING ORDER A LITTLE DUSTY PRICED TO SELL
|
|
|
Syntron Vibratory Feeder Unit Model FMTOC3/4 - 115VAC
C10156. Syntron Vibratory Feeder Unit Model FMTOC3/4- 115VAC- Feeder vibrator tests OK- No hopper vibrator on this unit. Please review all the pictures. They are part of the description. We combine shipping whenever possible. Not responsible for customs charges.
|
|
|
Syntron Vibratory Feeder Unit Model FMCO - 115VAC - #2
C10155. Syntron Vibratory Feeder Unit Model FMCO- 115VAC- Feeder and Hopper vibrators test OK. Please review all the pictures. They are part of the description. We combine shipping whenever possible. Not responsible for customs charges.
|
|
|
Syntron Vibratory Feeder Unit Model FMCO - 115VAC - #1
C10154. Syntron Vibratory Feeder Unit Model FMCO- 115VAC- Feeder and Hopper vibrators test OK. Please review all the pictures. They are part of the description. We combine shipping whenever possible. Not responsible for customs charges.
|
|
|
JH-V2-1H-44 SYNTRON INSTRUMENTATION REMANUFACTURED
Equipment Emergency? Call 888-935-6433. Enter your search keyword in titles& description Add Repair Zone's Shop to your Favorites and receive email newsletters about new items and special promotions. General Interest, Payment Methods Accepted. To see all of our Servo motor and Electronic Products Visit our Store. Manufacturer: Syntron, Model# JH-V2-1H-44, Category: Instrumentation, Condition: Remanufactured, Weight: 5 lbs. Lead Time: If payment is received by 3:30pm Eastern Standard Time. Unit can be shipped same day. Please contact Repair Zone for urgency needs. Warranty: 1 Month Warranty, 1 Month Warranty Available Today We have this Instrumentation Available Today in a remanufactured condition. This means that the Syntron JH-V2-1H-44(JHV21H44) is used but has been restored by our expert techs and comes with a 1 Month Warranty. ... moreShipping& Payment, Warranty& Return Policy, Repair& Exchange Services, About Us, Contact Us, Payment Options We accept Pay Pal. MasterCard, Visa, American Express, Discover, Check or Money Order. Payment must be in US funds and be received by within 7 days of auction completion. Shipping We make every effort to ship each item the same day it is ordered and payment(by 3:30pm.est) is processed. This is not always possible but we realize that time is money! You will be contacted via e-mail when your item is shipped and provided a tracking number if possible. Contact us if it is an emergency need. Our shipping policy is: Same-Day or 1-Day Shipping- New items. Remanufactured, Pulled Working, As-is 3-Day(estimated) Shipping- Item needs Repair Zone Qualification. Please call! Remanufactured items carry a one year warranty from date of purchase. If you are unsure of the warranty. Call 888-935-6433, or e-mail us at support@repairzone.com Repair Zone will exchange. Repair, or refund back to the buyer if the item can not be fully repaired. Repair Zone must be informed if a unit is being returned for any reason. A 25% restock fee may apply. And refunds will not be given for i
|
|
|
FMC SYNTRON JOGGER J-50 B J-50-B J50B PAPPER JOGGER *USED TESTED*
FMC SYNTRON JOGGER J-50 B J-50-B J50B PAPPER JOGGER*USED TESTED* FMC SYNTRON JOGGER J-50 B J-50-B J50B PAPPER JOGGER*USED TESTED* PAYMENT P AYMENT: We accept pay pal. Wire transfers, visa, master card( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped. IF YOU FEEL THE SHIPPING COST FOR INTERNATIONAL LOCATION IS TOO MUCH. CONTACT US AND WE CAN CHECK IF WE CAN RE-SIZE THE BOX TO LOWER THE SHIPPING COST. DON'T LET SHIPPING COST MAKE YOUR DECISION. CONTACT US AND WE WILL WORK WITH YOU AS MUCH AS WE CAN! WE ALWAYS USE YOUR PAYPAL ADDRESS AND INFORMATION TERMS OF SALE Inspection: Anyone is welcome to come and inspect an item in person during regular business hours Monday thru Friday 8:00 am to 5:00 pm EST. If you can’t come see the item yourself. Then let us know what additional information ... moreor photos you need in order to make your decision and we will do our best to get it to you. CONTACT US IF YOU HAVE ANY QUESTIONS PLEASE EMAIL US OR FIND US ON THE WEB PCMSURPLUSWORLD GOOD RELATIONSHIP If there are any problems with your order. Please contact us. We will work with you to resolve any issue as quickly as possible. We want customer 100% satisfaction! Launched from my store- Powered by 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-141a34c52b2-0xe0-
|
|
|
FMC Syntron PowerPulse 225290-A Power Pulse Electric Controller
You are bidding on an FMC PowerPulse 225291-A Rev 1 Electric Controller. You are bidding on ONE. We have 9 available. All of them are in good working order. Item comes as pictured. We will ship this item anywhere in the lower 48 states for a fee of $10.95. Expedited shipping is available for an additional fee.
|
|
|
FMC Syntron Electric Feeder Vibratory Bowl Controller CSCR-1B1 115V
The item available here is a used FMC Syntron Electric Controller for feeders and vibratory bowls and hoppers. It appears to be in good condition. This item has not been tested and comes with a 14 day return policy from the date the item was shipped. Except for international shipments. Postage is not covered. Here's the specs: M# CSCR-1B1 S# CPEC08526 1196 115V 50/60hz 5.0 amp Items will be paid for immediately using PayPal. If you have zero feedback. Please contact before bidding, and if you have negative feedback, please don't bother bidding. Items purchased will be shipped using USPS and there will be a $3 handling fee to professionally package this item and to cover insurance. International shipments will have a $8 fee and NO RETURN policy. No exceptions. Items over $200 will have signature confirmation with the shipment. But ... moreat no extra cost.
|
|
|
Syntron Company Tabletop Paper Jogger TPJO-1 Tool
Paypal. Visa, Mastercard, American Express. We would like this transaction to be a great one for you so please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Syntron Company Tabletop Paper Jogger ... moreTPJO-1 Tool DESCRIPTION: ~ Up for bid is a good working Syntron tabletop paper jogger. gsrx_vers_525(GS 6.6.5(525) 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-141ea95aff0-0xfe-
|
|
|
MIDWEST 12' VIBRATORY BOWL FEEDER AUTOMATIC BOWL FEEDER SYNTRON FEEDER
HERE IS A NICE RUNNING MIDWEST 12" VIBRATORY BOWL FEEDER. THIS FEEDER BOWL CAN BE INSPECTED IN MPLS MN. TO SET UP AN INSPECTION PLEASE CALL JIM@ 952-931-7974. THANK YOU. YOU CAN VIEW THIS OWL FEEDER UNDER POWER ON YOU TUBE@ MOV02531 MAKE: MIDWEST MODEL: 12" VIBRATORY BOWL SERIAL# 11426 CONTROL: RODIX FEEDER CUBE ELECTRICS: SINGLE PHASE. IF BUYER NEEDS THIS ITEM TO BE PALATALIZED. THERE WILL BE A $35.00 HANDLING FEE
|
|
|
Syntron AC Model SS-0316 12.043 Heat Sink Module with 2 SCR’s or Triac’s.
Syntron AC Model SS-0316 12.043 Heat Sink Module with 2 SCR’s or Triac’s. No markings on them. It’s 6” High X 4-1/2” X 3-1/4” Wt 1lb 6oz.
|
|
|
SIG Packaging Technology FT0N Syntron Feeder T27158
Call: 915-219-7095- 8am- 5pm Mountain Time SIG Packaging Technology FT0N Syntron Feeder T27158 Warranty Information: USED PULLED FROM WORKING EQUIPMENT Product Description: Greetings from the Southwest. We are TEAM International Inc, 2nd Hand Store to the Trade. TEAM is a trading company. We buy and sell just about anything. We are always up to making a deal so please feel free to inquire. Check Out Now Payment Shipping Customer Service Check-Out Now: Click the Pay Now button at the top of this listing to immediately proceed with our checkout and payment process. Please note that the Pay Now button is ONLY available after winning an auction or completing a Buy It Now purchase. Check-Out Later: If you desire a freight quote. Custom shipping, or any extra service we can invoice you after the purchase with your request. Please give us a call ... moreor eBay message with your request. We are open to any and all payment methods. We also take credit card payments over the phone. 915) 219-7095• Payments can also be sent to: TEAM International Inc Accounts Payable 2901 Durazno Ave El Paso TX 79905 For shipments to Texas addresses. We are required by State law to collect 8.25% Sales Tax. ATTENTION TEXAS RE-SELLERS: If you have a Texas Resale Tax Certificate we can remove the Texas Sales Tax. We ship all around the world. If you need something out SAME DAY/OVERNIGHT please give us a call to confirm- 915) 219-7095• Shipments Under 60 lbs. UPS: Our primary carrier is UPS for domestic shipments. USPS: For International shipments we use USPS DHL International: We can ship on your DHL account. Please send account number with order. Ship on your account: Have a Fed-Ex or UPS account? Send us the account number and we w ill remove the shipping charge from your order and ship: Overnight. 2 day, or 3 day. Ground shipping not available on Fed-Ex accounts) Freight Shipments Freight Quotes: For freight quotes please send via message or phone: Zip code. Commercial or residential, need a lift-gate. Shipping Insurance: Insuran
|
|
|
Syntron electric jack hammer vintage
Model"16"
|
|
|
Brass Syntron Electric Motor Name Plate Collectible Collage Art Homer City, PA
Brass Name Plate from a very old electric motor. About 1' x 2 1/2" Syntron Electric Company Homer City. PA. lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-1421b702145-0xfa-
|
|
|
FMC SYNTRON MAGNETIC FEEDER F-010B 115V
THIS IS A NICE WORKING FMC SYNTRON MAGNETIC FEEDER F-010B 115V% Shipping on this item is 35.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase ... moreif it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item25.
|
|
|
Cap Snap 1 Gallon SS Inline Capper with Syntron Vibratory Cap Sorter
Cap Snap 1 Gallon SS Inline Capper with Syntron Vibratory Cap Sorter Mfg by Cap Snap Last running 38mm snap caps/ press on Cap chute and pick off Press on applicator Syntron vibratory cap sorter/ hopper SS base SS adjustable legs Electrical 120 Volt/ 60 Hz/ 1 Phase Just removed from production EXCELLENT CONDITION! For More Information EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
FMC Syntron Magnetic Vibrator V50D1S 115V 60hz 4.5 Amps
FMC Syntron Magnetic Vibrator V50D1S 115V 60hz 4.5 Amps Appears Unused.Sold As Shipping Weight: 40 Lbs Shipping Dimensions: 14" 14" 10" Box, Check out my! Sale Details: Condition: AS-IS, Only items pictured are included- If a part is not pictured. Or mentioned in the description, then it is not included in the sale. Location visits by appointment only. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us if payment cannot be made within seven days. Payment arrangements can be made. We accept: PayPal and Bank Wire Transfers in USD or Canadian Funds, Canadian Customers are subject to 5% GST or Applicable HST on Shipping and Material, SHIPPING DETAILS: All items will be securely packaged and shipped via the best and most economical way possible. All tracking information will be forwarded to the email ... moreaddress associated with your PayPal or eBay account. Canadian Shipping, Items up to 65Lbs are shipped Canada Post. 65Lbs- 150Lbs are shipped UPS, Over 150Lbs are Shipped via Freight Carrier, If the customer wants to handle shipping arrangements. Please provide us with your shipping information and account number. Canadian Customers are subject to 5% GST or Applicable HST on Shipping and Material, Expedited Shipping Services are available for an extra cost, US Shipping, Items up to 65Lbs are shipped Canada Post. 65Lbs- 150Lbs are shipped UPS, Over 150Lbs are Shipped via Freight Carrier, If the customer wants to handle shipping arrangements. Please provide us with your shipping information and account number. Customer is responsible for any applicable incoming duties or taxes, Expedited Shipping Services are available for an extra cost, INTERNATIONAL SHIPPING, Items up to 65Lbs are shipped Canada Post. 65Lbs- 150Lbs are shipped UPS, Over 150Lbs are Shipped via Freight Carrier, If the customer wants to handle shipping arrangements. Please provide us with your shipping information and account number. International Orders are subject to applicable DUTIES. TAXES o
|
|
|
FMC C2B SYNTRON ELECTRIC VIBRATOR AMPLITUDE CONTROLLER 480V-AC 3A AMP D280821
Product Specifications. Brand: FMC, Condition: Used, Model: C2B, Type: Controller, Input Voltage: 480 V-AC, Output Current Rating: 3 A AMP, Weight: 20.00 lbs, Dimensions: 10.50 x 15 x 9 in, SKU: D280821, Category: Electrical· Controls, Additional Notes: MISSING FUSE HOLDER SOME WIRES HAVE BEEN CUT SYNTRON ELECTRIC VIBRATOR AMPLITUDE, Product Photos. $250 USD We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship our items within 1 to 2 business days of receiving payment. We can ship through express or overnight UPS service at buyer's ... moreexpense. Our daily shipping cut-off is 3:00PM Eastern Time. We only ship through UPS. Collect shipping must be through your UPS account. If the item is to be shipped on a skid please contact us for a competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your eBay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence. We put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer hassle-free refunds! All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inacc
|
|
|
FMC Syntron LD8 Magnetic Feeder
FMC Syntron LD8 Magnetic Feeder. If for any reason you are unsatisified. Item can be returned within 2 weeks in condition received for refund of purchase price. Included In Sale: FMC Syntron LD8 Magnetic Feeder Model# LD8. Volts: 115. Hz: 60. Amps: 2.5. I accept Paypal. Money Orders or Checks. I ship by UPS or USPS.
|
|
|
FMC SYNTRON MAGNETIC VIBRATORY SHAKER MODEL V-2-B 115 VOLT
FMC SYNTRON MAGNETIC VIBRATORY SHAKER MODEL V-2-B 115 VOLT 60 Hz SEE PHOTOS ABOVE FOR DETAILS AND ITEM SPECS BUYERS NEEDING FREIGHT QUOTES. PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST. 856-541-8884 YOU MAY PICK IT UP AT OUR SHOP: 430 CHELTON AVE. CAMDEN, NJ 08104, OR HAVE IT SHIPPED UPS OR USPS. SHIPPING CHARGES ARE CALCULATED BY ZIP CODE 856-541-8884(FAX 856-541-8885) HOURS OF OPERATION( 7AM- 3PM EASTERN)UPS PICKS UP AT 12:00 NOON USPS PICKS UP AT 9AM EST. FOR FREIGHT SHIPMENTS PLEASE E-MAIL OR CALL FOR ACTUAL FREIGHT COST.THANKS LOCATED IN SV-51 D-8 VINCE
|
|
|
Syntron Paper Jogger TJ1
What we have here is a very good running paper jogger with a 1-10 setting dial a on/off switch and two fuses along the front.The table is titled back and is 23"x18" with a 4" boarder on two sides.This has a good power cord and runs flawlessly.I will ship this to a confirmed address only no exceptions parcel 48.50 and insurance is included if your location is remote or the fees run higher I only expect the buyer to cover what it takes to get your item to you so if this is a problem I want you to know before bidding.If a tracking number is desired I can add it to the invoice.I would like to see payment in 3 days and paypal is prefered but contact me for other possible options.I have the countries listed I sell to so if your not listed it is vital to contact me to prevent a problem later since several areas of the world getting ... moreinsurance is not possible without shipping global express which is shockingly high and I will not ship without insurance.If your new to ebay with low feedback and choose to bid thats fine but understand you are entering a contract and failure to uphold your end can result in not being able to use this service.I explain things the best I can but your questions most definetly help fill the gaps so please ask early so I have time to answer.For shipping quotes I use USPS primarily and that is from 97048 and a rough Idea can be obtained at there sight or contact me for a closer idea I try to keep cost down but do not want to pay to ship items out of my pocket.I offer all the extras from the usps for shipping such as priority.Registered,global ect so if any of these are needed and the old slow parcel(2-9 days) does not work let me know.Thanks and good luck!
|
|
|
FMC J-50 Syntron Paper Jogger Flat Wood 115v 60Hz 4.0amps (No Fuse Cap) Tested
Make sure you get our updates on discounts and new available products! In titles& description This listing is for a Syntron Paper Jogger. The item was tested and is in a working condition. This item is missing a cap the keeps the fuse in place. Please see pictures for a more accurate product description. We accept PayPal payments which allows buyers to use a card to pay without setting up an account. We accept payment by eCheck through PayPal. However, please understand this can delay your shipment by up to two weeks while payment clears through the Paypal system(check with PayPal on the expected clearance date) Once your eCheck payment clears, your item will be dispatched within 24 hours. We offer Free Shipping whenever possible. However, on items that we do charge shipping on, please be aware that there is more to the shipping cost ... morethat the price of a stamp. Our shipping costs include delivery charges, packaging, handling charges and insurance where required. We are a fair price seller with transparency about the price you will be charged. We always price our shipping to allow you to provide a 5 star rating when giving feedback. Without exception we can only ship your purchase to the address you supplied through PayPal at the time you made payment to us. This is a necessary security measure which is a PayPal requirement not ours. We reserve the right not to ship to an unconfirmed PayPal address for high value items. You will be informed of this in good time if it becomes necessary. We use a variety of shipping methods. The service we use for each item will be clearly stated within each listing. If you have any questions on shipping please do not hesitate to contact us through eBay using the links above. Shipment will be through one of the following methods depending on size. Weight and service you have opted for, all out shipping methods include tracking information. US Delivery USPS 1st Class: Normally 2- 3 Working Days USPS Priority Mail: Normally 2- 3 Working Days USPS Parcel Post: Normally 5-10 W
|
|
|
Syntron TJ-1 Jogger
Syntron Jogger, Model TJ-1, single phase 115v, serial# 212518 514 Business Park Drive Dallas. North Carolina 28034 Phone: 704) 923-0414 Fax: 704) 923-0415 Policies& Terms• How to Contact Us: o Email: web at brooksprintingequipment.com § Emails are typically answered within the same business day. We are open Monday through Friday from 8:00 AM to 5:00 PM and other times by chance. Feedback Policy: o We leave feedback only after the transaction is complete and ask that you do the same. o Please leave a positive feedback for us if everything is as described in our auction and policy. And we’ll promptly do the same for you in return. § If anything is other than as described in our auction and policy. Please contact us via email right away so that we can look at the issue and arrive at an agreement before leaving poor feedback. Arranging ... moreInspection: o To inspect any item that we are offering. Please inform us via email. § Please include your name and phone number so that we can contact you to schedule an inspection. § Inspections must be done prior to the end of the auction. All Sales are Final: o The item will be shipped in the condition as photographed. o All items are sold AS IS. WHERE IS. No warranties are expressed or implied. The buyer assumes full risk of shipping: o All items are shipped FOB Dallas. North Carolina 28034. § This means that our responsibility for this item ends when it leaves our door. o It is the buyer’s responsibility to request and pay for insurance. o All transactions are agreed to have taken place in Dallas. NC 28034 and are governed by the laws of North Carolina. You are bidding on the item(s) photographed in this listing. The buyer is not to infer or assume that any other items are included in the auction unless outlined in the description above(ie: cables. Stands, tables, software, etc. Payment Options• Accepted Payment Methods are: o Cashier’s Check. Money Order, or Wire Transfer. § No personal checks shall be accepted from parties which do not have esta
|
|
|
SHINKO-SYNTRON E-B 60 CYCLES VIBRATORY BOWL FEEDER 6.5" DIA. 100V 0.8AMP
BT# 11685 M07E4-090.1Y You are looking for: SHINKO-SYNTRON E-B 60 CYCLES VIBRATORY BOWL FEEDER 6.5" DIA. 100V 0.8AMP USED AND TESTED ITEM! IN GOOD CONDITIONS. 10 DAYS WARRANTY! Manufactured by: SHINKO-SYNTRON ELECTRIC CO. LTD. Additional info: CYCLES VIBRATORY BOWL FEEDER Type: E-B Cycles: 60 Diameter: 6.5 inch. 100 Volts 0.8 AMP Visit our eBay store: Check our Store Highlights In addition: Hablamos ESPAÑOL und DEUTSCH Domestic handling time(turnaround) 1 business days We ship with: Powered by
|
|
|
Syntron c 1939-1940 Electric Hammers Brochure w/ Extras
Syntron c 1939-1940 Electric Hammers Brochure w/ Extras Syntron c 1939-1940 Electric Hammers Brochure w/ Extras Literature type: Non-color catalog Dimensions: 8 1/2 x 11 inches Notes: 8 pages. Includes specs and features Condition: Good overall Check out our eBay Store for more great items! Be sure to read our descriptions to find out what condition the item(s) is/are in. PLEASE READ ENTIRE LISTING BEFORE COMMITING TO BUY! What type of payments do you accept? We accept: Paypal-Remember. EChecks can take several days to clear. Be sure to scroll down to the bottom of our listing where it reads, When will my item be processed and shipped" to find out how long it takes your country's bank to process an eCheck. Credit Cards call us. Or FAX. How much is shipping? SHIPPING Buyers within the U.S. to pay $4.75 for Shipping& Handling via ... moreUSPS Media Mail. UPS and USPS Priority Mail. If not listed above may be available, please inquire for rates. Buyers in Canada and Mexico to pay $20.95 for USPS Priority Mail International Flat Rate Envelope Shipping& Handling. International buyers to pay $24.95 for USPS Priority Mail International Flat Rate Envelope Shipping& Handling. Do you combine orders? If you are purchasing multiple items and wish to have them combined, do not pay for any items until you have received a complete. Combined invoice from us. Please send an email to request an invoice when you are done buying. We combine shipping for up to 5 days from the end of the first item purchased. Usually. When multiple items are being shipped together, there will be a $1 handling fee for each additional item. This does not apply to all items, especially on international shipments, so please make sure to email us for a quote before purchasing. Once payment has been made we cannot combine additional items. Is there any other shipping information I need to know? We are NOT responsible for any delivery failure due to wrong or unclear or incomplete addresses given. We will only ship to the address that has been ve
|
|
|
Syntron Paper Jogger Model J-1-B Tested Working
For Sale is a Syntron Paper Jogger Model J-1-B. This unit has been tested working properly on all functions. This unit is in good condition and has the regular use marks for an item like this. Please let me know if you have any questions or concerns. Does not include manual. Attachments or original packaging. We have described this item to the best of our knowledge and ability. Please carefully examine each of the photos and ask me if need any other information before you purchase. Each of our items is carefully packaged at our warehouse to ensure a safe shipment. Important! Please read carefully. Please note these units are used. Refurbished, and/or returned(unless otherwise stated) and may show signs of typical wear and tear, may need calibration, and may not function to full manufacturer specs based on age, firmware, calibration, etc. ... moreESOLUTIONS1. describes each unit's condition. Testing method(if any) and functionality as detailed as possible. If you receive your unit and find that it does not directly reflect our description or is D.O.A. Contact US. and request a Return Merchandise Authorization(RMA) and we can replace your unit or issue you a refund. We will provide our shipping account information for returns. Refunds DO NOT include shipping and handling. Please- feel free to make is a reasonable offer. But God demonstrates His own love toward us. In that while we were still sinners, Christ died for us. Romans 5:8* Jesus Christ- the only man to ever change the time line.BC.AD.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-143e94ac869-0xf1-
|
|
|
Kaps All Product Cap Hopper with V-20 V20 Syntron Magnetic Vibrator *Used Tested
Kaps All Product Cap Hopper with V-20 V20 Syntron Magnetic Vibrator*Used Tested. Kaps All Product Cap Hopper with V-20 V20 Syntron Magnetic Vibrator*Used Tested* PAYMENT P AYMENT: We accept pay pal. Wire transfers, visa, master card( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped. IF YOU FEEL THE SHIPPING COST FOR INTERNATIONAL LOCATION IS TOO MUCH. CONTACT US AND WE CAN CHECK IF WE CAN RE-SIZE THE BOX TO LOWER THE SHIPPING COST. DON'T LET SHIPPING COST MAKE YOUR DECISION. CONTACT US AND WE WILL WORK WITH YOU AS MUCH AS WE CAN! WE ALWAYS USE YOUR PAYPAL ADDRESS AND INFORMATION TERMS OF SALE Inspection: Anyone is welcome to come and inspect an item in person during regular business hours Monday thru Friday 8:00 am to 5:00 pm EST. If you can’t come see the item yourself. Then ... morelet us know what additional information or photos you need in order to make your decision and we will do our best to get it to you. CONTACT US IF YOU HAVE ANY QUESTIONS PLEASE EMAIL US OR FIND US ON THE WEB PCMSURPLUSWORLD GOOD RELATIONSHIP If there are any problems with your order. Please contact us. We will work with you to resolve any issue as quickly as possible. We want customer 100% satisfaction! Launched from my store- Powered by
|
|
|
FMC SYNTRON ELECTRIC VIBRATORY SHAKER SPEED CONTROLLER MODEL C-SCR-1B
NEW FMC SYNTRON ELECTRIC VIBRATORY SHAKER SPEED CONTROLLER MODEL C-SCR-1B 115 VOLT 50/ 60 Hz
|
|
|
FMC Syntron J1 Table Top Paper Jogger 2 BIN - Works Great -
Very nice paper jogger here. In great working condition. Very heavy duty. All wood top.
|
|
|
FMC Technologies CheckMate Syntron Jogger Paper 229832A Jogger (C758106)
CDR Express FMC Technologies Syntron Jogger Checkmate This item has scratches and scuffs. But overall is in good condition. Item comes in original box; box is in low to fair condition. Item has only been tested to power on. Includes: 1) Service Manual No accessories are included. See photos for visual details. Welcome to CDR_Express To make your purchase as simple and easy as possible. Please refer to the store policies listed below. Payment We accept the following forms of payment. You must have a US registered paypal account with a US address. No exceptions U.S. PayPal Only Sales Tax For shipments to Oklahoma addresses. We are required by State law to collect 8.375% Sales Tax. Shipping U.S. Only. Lower 48 states only) We ship all of our items FEDEX. Prepaid. We ship normal Business Hours, M-F, 9:00am- 5:00pm. Closed on weekends and holidays. ... moreCustomer Service is our Purpose! Return Policy: Warranty returns only. Sorry we can not always offer an exchange. In these cases a refund will be given. Advertising Errors: We strive for 100% accurate item descriptions! If we have an advertising error. Email us, and we will gladly resolve it to your favor! Warranty: 30 Day Warranty Against Defects.
|
|
|
Syntron Magnetic Vibrator, 230 volts/60 hz/.45 amps
Good working condition. 230 volts
|
|
|
Syntron Parts Handling Equipment Supply Hoppers (2)
Syntron Supply Hoppers. Top of hopper 21-1/2' X 21-1/2' Hopper height 16-3/4' Overall height 39-1/4' Tags on hoppers list Style#s B09326 and B09327.
|
|
|
1938 Rare Syntron Electric Tools Catalog-Hammer-Saw-Concrete Vibrator-Homer PA
VINTAGE 1938 SYNTRON ELECTRIC TOOLS CATALOG.FACTORY AND OFFICES IN HOMER CITY. PENNSYLVANIA.INCLUDES ELECTRIC HAMMERS& HAMMER TOOLS, ELECTRIC SAWS& ACCESSORIES, CONCRETE VIBRATORS, GAS/ELECTRIC POWER PLANTS, ELECTRIC SCREWDRIVERS, NUTTERS, DRILLS, GRINDERS, SANDERS AND HACK SAWS.INCLUDES DISCOUNT SHEET AND SEVERAL LETTERS ON COMPANY LETTERHEAD.40 PAGES.SOME MILD AGE WEAR.GOOD CONDITION
|
|
|
Syntron concrete vibrating feeder with hopper chute, 115 volts, runs & vibrates
This is an old heavy built Syntron vibrating concrete feeder with a chute hopper. It still runs good. And is 115 volt. This unit is heavy and I do not want to ship it. Please make arrangements to come pick it up. I will fork it into your truck. thanks
|
|
|
Syntron Check Jogger PN 229832A
Syntron Check Jogger PN 229832A Up for sale is a Syntron Check Jogger PN 229832A. Unit has been power tested only. Item has been described as accurately as possible. Being that im not an expert on this equipment this item is Sold AS-IS No returns or refunds. This unit will ship via Fedex Ground within 1-3 business days of confirmed payment. We are able to provide tracking numbers upon request. Please be aware that as this item is being shipped through Fedex. We are unable to ship to P.O. boxes so make sure that your address in eBay is correct. For our international customers, we are unable to guarantee your package outside of the continental United States; once your package leaves the US, we are unable to offer any refunds or returns. Please be aware of this before making an offer or purchase. Feel free to message us if you have any questions ... moreregarding our shipping policies and practices. Please feel free to ask questions. Thanks for shopping. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B4g7%3E-14445796369-0xf4-
|
|
|
ATF VA14 20 x 14” Flat Deck Jogger - Syntron PJ 15 Challenge Combination
SyntrATF VA14 20 x 14” Flat Deck Jogger- Syntron PJ 15 Challenge Combination Shipping: Free local pickup or ships by truck to most commercial addresses in the continental USA for around $125. Please read below( Shipping) and know that this is NOT a firm quote. We do ship internationally. So please contact us for a quote. ATF VA14 20 x 14” Flat Deck Jogger Unit has been tested and works! PFS is your authorized Ryobi. Horizon, Challenge, Baum, Perfecta, James Burn distributor with local sales and service throughout California, Arizona and Nevada. We ship worldwide with many international references. So please let us know how we can do business today! Actual listed machine pictured above is in the PFS showroom located in Phoenix. Arizona. We really want to sell this equipment! Feel free to"Bid" Best Offer" or"Buy It Now" ... morewe are very motivated to move this equipment. Call us if you have any questions) PFS– California 800-398-5283/ 714-238-1133 Or PFS– Arizona 602-437-9200 Or Send us an eBay message I know you are going to Best Offer this one. Location and General Terms of Sale: This machine is located in Phoenix. Arizona. Print& Finishing Solutions(PFS) is a new and used equipment dealer and we will make every effort to professionally and ethically represent machinery being sold. Warranty: All used printing and graphics machinery is sold"As Is" and"Where Is" unless otherwise mentioned. Guarantee of Satisfaction: PFS is a professional corporation with nine technicians(20-team members total) and we will make all machinery available for review prior to shipment. All machinery is available for you to personally. Or have a 3rd party, review prior to shipment. If the equipment does not meet your expectations, you will receive a full refund short any previously discussed reimbursement of expenses that PFS may have incurred. About Print& Finishing Solutions: For additional company information please call 800-398-5283 or 714-238-1133 or send us an eBay message. Our corporat
|
|
|
Syntron 22 x 17” Flat Deck Jogger - Syntron PJ 15 Challenge Combination
Syntron 22 x 17” Flat Deck Jogger- Syntron PJ 15 Challenge Combination Shipping: Free local pickup or ships by truck to most commercial addresses in the continental USA for around $125. Please read below( Shipping) and know that this is NOT a firm quote. We do ship internationally. So please contact us for a quote. Syntron 22 x 17” Flat Deck Jogger Unit has been tested and works! PFS is your authorized Ryobi. Horizon, Challenge, Baum, Perfecta, James Burn distributor with local sales and service throughout California, Arizona and Nevada. We ship worldwide with many international references. So please let us know how we can do business today! Actual listed machine pictured above is in the PFS showroom located in Phoenix. Arizona. We really want to sell this equipment! Feel free to"Bid" Best Offer" or"Buy It Now" we ... moreare very motivated to move this equipment. Call us if you have any questions) PFS– California 800-398-5283/ 714-238-1133 Or PFS– Arizona 602-437-9200 Or Send us an eBay message I know you are going to Best Offer this one. Location and General Terms of Sale: This machine is located in Phoenix. Arizona. Print& Finishing Solutions(PFS) is a new and used equipment dealer and we will make every effort to professionally and ethically represent machinery being sold. Warranty: All used printing and graphics machinery is sold"As Is" and"Where Is" unless otherwise mentioned. Guarantee of Satisfaction: PFS is a professional corporation with nine technicians(20-team members total) and we will make all machinery available for review prior to shipment. All machinery is available for you to personally. Or have a 3rd party, review prior to shipment. If the equipment does not meet your expectations, you will receive a full refund short any previously discussed reimbursement of expenses that PFS may have incurred. About Print& Finishing Solutions: For additional company information please call 800-398-5283 or 714-238-1133 or send us an eBay message. Our corporate offic
|
|
|
Vintage Syntron Company Electric controller, tube
For auction. Vintage Syntron Company Electric controller, tube type. TYPE HC, STYLE 4278, 110 VOLT, CYCLES 60, AMPERES 15, SER. A8C50108. Here are the numbers on tubes. DEC 1947. Metal box is 6'x6 1/2'x8 1/2' I believe it is military. If I can help in any way please let me know! THANKS
|
|
|
FMC SYNTRON F010B STAINLESS S/S MAGNETIC VIBRATORY FEEDER W/ POWERPULSE 115V V
SYNTRON STAINLESS STEEL VIBRATORY MAGNETIC FEEDER W/ SYNTRON POWERPULSE MODEL: F-010-B VOLTS: 115 AMPS: 2.0 FEEDER TRAY DIMENSIONS: 10" x 19-1/2" x 4" NOTE: ONE POWER LEAD IS CUT. AS SHOWN IN PICTURES. NOTICE: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEMS HAVE NICKS AND SCRATCHES. WHICH DO NOT AFFECT USABILITY. Condition: NEW. In box NEW. No box NEW. Old inventory X, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEMS HAVE NICKS AND SCRATCHES. WHICH DO NOT AFFECT USABILITY. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will ... moreenter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. INTERNATIONAL SHIPPING: WE S
|
|
|
VERY NICE SYNTRON MAGNETIC FEEDER 115V 50HZ .35A MODEL FTOC
VERY NICE SYNTRON MAGNETIC FEEDER 115V 50HZ.35A MODEL FTOC This is a fixed auction for a Very Nice Syntron Magnetic Feeder. Model: FTOC 115V 50 Hz.35 Amps Item is in excellent condition and exactly as shown. This is a genuine syntron part. The shipping costs we list in our description are for the 48 contiguous USA states only. Shipping will be recalculated for buyers in Hawaii. Alaska or outside the United States once we have received your shipping address. Buyers are responsible for their Country's custom fees. We always combine shipping to give you the lowest possible cost. We have competitive rates for our always welcomed international bidders. We pride ourselves on our customer service. And we want to make this eBay transaction as smooth as possible. Please feel free to call us between 9:00-5:00 EST Monday-Friday at 800 826 3433 if ... moreyou have any questions.
|
|
|
Dengensha DG vb2 SYNTRON MAGNETIC FEEDER vibrator vibratory shacker 115v
Dengensha DG vb2 SYNTRON MAGNETIC FEEDER vibrator vibratory shacker 115v Units are great for vibrating a tray or feed chut. They have a mount and run on 115v power. Sold as seen as is. You are buying one. READ BELOW BEFORE BIDDING: You are buying the above as is as. This means don't assume anything. If you have questions ask. If it’s not listed as new in the box then don't think it is. It’s sold as seen as is. Even if the unit has been tested or removed from a working machine. Payment: PAYPAL ONLY We will ship using our ups account within three days only in the USA. All other areas will ship USPS and we will ship on Saturdays only so it could be up to 6 days depending when you buy the unit. ALmost all items were removed from a working machine but are sold as is. Feedback: We will post POS feedback withen 30 days of your purchase. ... moreIf a threat of Negative. feedback is used to get something that was not listed or service not listed we will forward the request to EBAY without notice to the buyer. We offer many vibratory Feeder Services. Service on Feeding Equipment, Refurbishing, Replacement or Re-tooling, Retrofitting and new turnkey systems. We have the largest inventory of used Vibratory Feeders you will ever find. If you have any questions regarding the above units please contact us at Feeding Concepts Inc. 317-773-2040. On Jan-18-13 at 13:58:53 PST. Seller added the following information: 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1449fe3d8b8-0x111-
|
|
|
OLD Syntron electric controller,Type HC-Volts 110, Help-What does this do ???
For sale is this OLD Vintage Syntron Electric Controller! Box is 8 inches tall and 7 inches wide! Box is old with two old tubes in it that are light bulb shape. Has a plug in the front and plug in in the back! Have no idea what this is or does-Good Luck-Shipped to you at cost and please ask questions to be happy. thanks Al Handle on the top to carry. plate on top says===Syntron Company Lumer City, Pa. USA Syntron Electric Controller Type HC Style 4278 Volts 110 Amps 6 Serial E6C8615 Old!
|
|
|
FMC Syntron EB092 Magnetic Parts Feeder
FMC Syntron EB092 Magnetic Parts Feeder. If for any reason you are unsatisified. Item can be returned within 2 weeks in condition received for refund of purchase price. Included In Sale: FMC Syntron EB092 Magnetic Parts Feeder Model# EB092. Volts: 115. Hz: 60. Amps: 2. I accept Paypal. Money Orders or Checks. I ship by UPS or USPS. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-144a0322d29-0x113-
|
|
|
Syntron Model J-1-B Tabletop Jogger jd
THIS AUCTION IS FOR A Syntron Model J-1-B Tabletop Jogger Jogger is in good. Used condition Includes Power Cable. No other cables or accessories included. Tested and Working. FREE 30 DAY WARRANTY! CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. Important Please Read! Thank you for choosing Hitech Assets for your ebay purchase. We are an asset management company and have been in business for 10 years here in Oklahoma City. We are a RIOS R2 certified facility and follow stringent guidelines for our processing. Recycling and re-distribution of offline IT related products. We work very hard to provide a professional ebay experience by accurately describing our auctions and shipping them in a timely manner. If for any reason you need to contact us please feel free to call Brandon Stevens the Ebay Manager at 405-604-4872 ext. 242 Mon-Fri 8-5 CST or ... moreyou can click on contact seller in any of our auctions and your question will go right to my inbox. PAYMENTS! We accept PayPal only. Sales taxes will be added for OK residents at 8.375% You may also pay upon pick up but please contact me first and let me know when you are coming. There will be 2% charge for local pick up. All non paying bidders will be subject to Ebay’s non-payment policies but if you need more time please contact me. SHIPPING! We will strive to ship all paid auctions within 3-5 business days. We are closed weekends so all shipping is done Mon-Fri. We use Fedex and USPS for all packages. Any orders needing to be shipped on a pallet can be shipped with several different carriers. Expedited shipping options are available if you contact us first. We offer combined shipping rates on multiple purchases but please contact us first for accurate rates. We only ship to the United States and Canada but we may make exceptions if you contact us first. Buyers will need to contact us for a quote on all Shipments to Hawaii. Alaska. Puerto Rico and APO'S. All packages we ship are insured for the amount of the purchase and that is included in the listed or q
|
|
|
GOOD USED FMC SYNTRON PAPER JOGGER J-50-B 115V 60HZ 4.0 AMP (94)
THIS IS FRESH TAKEOUT FROM RECENTLY CLOSED FACTORY FMC SYNTRON J-50 PAPER JOGGER MODEL J-50-B VOLTS 115 HZ 60 AMPS 4.0*WE SELL A LARGE VARIETY OF INDUSTRIAL ITEMS. FACTORY ITEMS, PARTS, ETC WITH NEGOTIABLE PRICES. WHILE YOUR HERE, PLEASE FEEL FREE TO TAKE A LOOK AT WHAT WE HAVE TO OFFER IN OUR STORE, AS IT'S BEING UPDATED EVERY DAY! Please know. That when we have new items, it is our policy to open the package, to ensure there are no pieces broken or missing. Serious buyers only! All items must be paid for within 7 days. Any items not paid for within 7 days will be cancelled and have an unpaid item dispute filed. Once that is complete. The items will be relisted. Please disregard the number and letter in parenthesis it is for office use. Please be sure to look at our other auctions as we do combine on shipping. If you are bidding on more ... morethan 1 auction please wait until all of them for that week are over so we can send you a combined invoice to save you on shipping. Thanks! Check out my! Be sure to add me to your! Shipping Price listed is based on delivery within the Continental US only. Alaska. Hawaii, and Puerto Rico as well as international buyers should contact us for shipping quote. RETURNS: If we make a mistake with info in the auction or say something works and then it doesnt etc then we will take full responsibility in a refund but just to return something because you ordered the wrong thing or bought the wrong part number or did not know if something is outdated we will not accept a return. I just got a negative because an item we had in our store was obsolete but had the part number on it. We assume the buyer knows what he is buying or needs and any items that no longer are being made are often purchased on ebay as a last resort to find obsolete items.
|
|
|
* Syntron Check Jogger * PN229832-A * FMC MODEL CHECKMATE *
Syntron Jogger* PN229832-A* FMC MODEL CHECKMATE* This jogger is in super condition works on checks or cash! Standard 115 volt grounded plug UL listed. FMC Technologies.
|
|
|
2 Syntron Vibratory Parts Feeder Bowl Flow Switches FS4AC Namco EA150 Limit
you are buying the two rod type mechanical limit Syntron Flow Switches seen in pics. these are units are hard to come by in the secondary market. Model number FS4AC. Units have a Namco Limit Swith EA150-30013. these units came off of two Syntron Vibratory Feeder Bowls that we previously sold on this site. one unit has a male electrical end and the other has a female end as shown in the last pic. if you check our past feedback we sold all 6 vibratory bowls from a local closed factory and all were in excellent working condition. however. Unlike the bowls themselves- we are unable to fully test these units at our warehouse due to lack of proper electrical equipment they may be in perfect working order or they may need some adjustments and/or repair. we do not know and you are buying as such. considering that the Namco units are $160 ea new. ... moreWe're going to price these to move with room for repair and free shipping. nevertheless, they sell as is. It is the sole responsibility of the buyer to verify all aspects of the machine tool. Descriptions, specifications, condition, and suitability of intended usage. Inspection is welcome by appointment. We are liquidators, not dealers, consequently no warranties or guarantees exists. Ask any questions prior to bidding knowing our knowledge of this equipment may be limited. We consider sales final with no returns. Payment must be received within 3 days of the end of the auction dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-144ad50761d-0x110-
|
|
|
SYNTRON VINTAGE ELECTRIC HAMMER DRILL-MODEL 10-RO-AIR COOLED-BITS INCLUDED
HERE IS A PRETTY COOL OLD TOOL. A SYNTRON"ELECTRIC HAMMER DRILL" IT IS AIR COOLED. WE ARE TOLD IT WAS USED IN ONE OF OUR LOCAL COPPER MINES HERE IN ARIZONA. SURELY A PIECE OF HISTORY! RUNS GREAT. COMES IN IT'S ORIGINAL STEEL CASE WITH EXTRA BITS AS SHOWN. THANKS FOR STOPPING!
|
|
|
FMC Technologies 225484-A Syntron PowerPulse Controller 115V 5A 50/60Hz, 1 Phase
FMC Technologies 225484-A Syntron PowerPulse Controller 115V 5A 50/60Hz. 1 Phase From our inventory. We are selling a FMC Technologies 225484-A Syntron PowerPulse Controller 115V 5A 50/60Hz. 1 Phase. Specifications: Model# 225484-A More Information: 115V 5A 50/60Hz 1 Phase ST45-3-A 3 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 3 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per ... moreeBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep i
|
|
|
SYNTRON VINTAGE ELECTRIC ROTARY HAMMER DRILL-MODEL 10RO, AIR COOLED W/BITS
UP FOR BID IS THIS AWESOME VINTAGE SYNTRON AIR COOLED ELECTRIC ROTARY HAMMER DRILL W/EXTRA BITS. COLLETS& STEEL CASE. THIS TOOL IS COOL AS HECK AND ALTHOUGH ITS PRACTICALLY A MUSEUM PIECE IT STILL RUNS LIKE A TOP! I'VE SEEN THESE SELL AT UPWARDS OF $500. THIS TOOL WAS USED IN ONE OF OUR LOCAL COPPER/GOLD MINES AND TRULY IS A PIECE OF ARIZONA HISTORY, PLUS IT REALLY LOOKS AND SOUNDS COOL) IT IS IN GOOD WORKING CONDITION BUT OTHER THAN AS REPRESENTED IS BEING SOLD AS IS WITH NO RETURNS SO PLEASE BID WISELY. WE WILL SHIP INTERNATIONALLY BUT INTL BUYERS ARE SOLELY RESPONSIBLE FOR ALL INTL FREIGHT CHARGES, IMPORT DUTIES, FEES AND TAXES.
|
|
|
Syntron Check Jogger 229832-A FMC Technologies CheckMate
Works Perfect. No longer needed. Great Deal!
|
|
|
SYNTRON MAGNETIC FEEDER VXA 48-8-16
SYNTRON MAGNETIC FEEDER# VXA 48-8-16. WORKING WHEN REMOVED. This item was removed from a recently closed plant. This is a used item taken from a working environment. It appears to be in working order but is untested. It is the BUYERS RESPONSIBILITY TO REQUEST SHIPPING INSURANCE. If item is damaged during shipping without insurance. No refund can be given. Shipping costs are not refundable for any reason. We do not give refundsfor items unless the item is not in working order or auction did not accurately describe item. 893 B-3. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Syntron SCR Speed Control Module, Variable AC Controller, 600V, 20A, Rheostat
This is a used controller but in good working condition Syntron FMC model 178216A Variable AC controller Rheostat w/ SCR output 600V. 20A MAX Two wire unit w/ knob Small enclusure 2" x 1.5" x 1.25" This unit is made to control vibratory feeders but can be used to control any device that requires AC voltage(motor speed. Lights, etc) It requires a minimum load to operate. Shipping Information: I will combine multiple wins to reduce shipping cost for you. All items ship via USPS. I will also ship to most countries in the world. Contact me for a shipping quote outside the US. Payment Information: I accept PayPal. Ask about other methods. Warranty: Unless otherwise noted in the auction's description. All items are sold without warranty. Please contact me to resolve any issues you may have when your item arrives. Powered by The ... morefree listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage SYNTRON 10A-RO Rotating Electric HAMMER DRILL W/ Case
It works just fine and shows no abuse or heavy"contractor" type use. It comes with the case. Instructions, and a few spare parts and a bit. Thanks for looking.
|
|
|
1949 SYNTRON 1417 Diesel Pile Driving Hammer Catalog Brochure Lot Homer City PA
Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge This is an original vintage catalog type brochure on Self Contained Diesel Pile Hammers manufactured by the Syntron Company of Homer. Pennsylvania along with a letter on company stationery also dated 1949. Also included is a photo clipped out of a magazine showing US Navy Seabees using one of the company's Pile Hammers. The brochure is a four page pamphlet format printed on slick glossy paper with a large photo of the Syntron"Self-Contained" No. 1417 Diesel Pile Hammer with Crane-operated Rig on the front cover. This brochure has photos and detailed information on this Model 1417 Syntron Diesel Pile Hammer with the code"5M KB-9-1-49" printed on the back cover which I take to indicate a 1949 publication date. The letter is of a sales nature and also ... moredated 1949 and signed by General Sales Manager D.G. Black. All items are vintage originals issued by the Syntron Company of Homer City. Pennsylvania in 1949. All items are in good shape overall with some toning to the paper from age. I believe this company is now part of the FMC Corporation. Email any questions. Thanks for looking. Payment Terms Winning bidders will receive an email at the end of the auction explaining the option for paying with Paypal. If you have questions about how to pay for this item please let me know. If you made multiple purchases for a single shipment contact us for combined shipping charges which will normally be less than the amount shown on Paypal invoice. You will receive an email notifying you when your item ships. Buyers outside the USA. Please provide a telephone number for customs forms. Shipping Terms Please click on the Shipping& Payment tab above to access the eBay shipping calculator which will give you the options and costs for shipping your item depending on your zip code or country. Our shipping charges are based on actual postage cost plus less than one dollar to cover the cost of materials. Handling and delivery confirmation which i
|
|
|
Syntron BF2A Stainless Steel Vibratory Feeder
3881 FEEDER. VIBRATORY FEEDER, 10" WIDE X 26" LONG, STAINLESS STEEL-MFG. SYNTRON: MODEL: BF 2A. SER. 564784-PAN IS 7" HIGH-DRIVE: 115 VOLT-UNIT IS ON STAND 40" HIGH All items are F.O.B. Location and are sold AS IS. All descriptions are a reflection of the item to the best of our knowledge and are subject to change. Please contact Christopher Barten at cbarten@carter-wilson.com or call 1-800-465-3055 for more information.
|
|
|
Syntron Paper Jogger Model J-1 - Tested Working FMC
You are viewing this Syntron Paper Jogger Model J-1. Good working condition as well as good cosmetic condition. Fully tested. View pictures for cosmetic details. Don't miss out on this one. Thanks. This unit is heavy weighing about 27 lbs packed. Will be securely packed for the trip. Returns only excepted if item is not as described.
|
|
|
SYNTRON FMC J-50 PAPER JOGGER PRINTING GRAPHIC ARTS SN U81822
Up for sale is one(1) Syntron FMC Model J-50 Paper Jogger Printing Graphic Arts SN U81822. Align paper stock for offset presses. Duplicating machines, cutting, trimming, collating or folding operations. The J-50 tilt deck features double action for easy alignment of stock loads to 15 pounds prior to cutting. Trimming, collating or folding operations. This is a great tool for: In-plant printing Binding Straightening Folding Collating Cutting Trimming General printing Shipping and handling for this auction will be $89.95 to continental United States customers only(no PO Boxes. Street addresses only) Good Luck! Please Note: eConsign A to Z offers at auction a wide variety of items and does not claim to be experts on every item that we list. We do not intentionally miss defects or misrepresent our merchandise. We do attach large pictures of all ... moresides and angles for your viewing scrutiny. View them carefully and please ask questions about any concerns before bidding. We are not an authorized dealer.
|
|
|
Vintage Syntron electric hammer drill model # 26-SRO
Electric syntron hammer drill with bits out of an estate. Runs strong, in original case if you have any questions contact me di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14523e469b2-0x108-
|
|
|
Vtg SYNTRON VIBRATOR Vibratory finishing deburring parts tumbler machine mill ex
Vtg SYNTRON VIBRATOR Vibratory finishing deburring parts tumbler machine mill ex Vintage Vibratory Finishing Tumbler. Syntron” Different settings from high to low. Aluminum tray is removable. Very heavy base weighing approx. 40-50 lbs. Works great. Ref ms1334. Please feel free to ask any questions. Local pickup available in Harrisburg. PA.
|
|
|
Syntron Magnetic Feeder F-T01A #50366
Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Syntron Magnetic Feeder Model: F-T01A 115 Volt 60 Hz 0.09 Amp lm. Contact Us@ info@idealmachinery.com or feel free to call 248-627-3135 WARRANTY All purchased items include a 30 day warranty(from date of purchase) unless otherwise stated. This warranty does not include items sold"as parts" or"as is" It also does not include manuals or new factory sealed items. Item must be returned in the same condition as purchased. Additionally the security seals must not be tampered with or removed; DOING SO WILL VOID THIS WARRANTY! In the unlikely event that your purchase does not turn out as expected. Please contact us for an RMA number as well as return instructions. Please email me ... morewith any questions and thanks for looking! Check out my! Be sure to add me to your! by adding my eBay Store to your Favorites Payment in full must be made prior to loading. We accept PayPal. Credit cards, bank wire transfers and business checks; NO PERSONAL CHECKS, Please! All local. County, state and federal taxes are the sole responsibility of the buyer and are not included in the purchase price. Items can be picked up at 10230 N. Holly Rd. Holly. Michigan 48442. Please be sure and call our office at 248-627-3135 to schedule a time if you are picking up your item. We will need a 24 hour notice if your items requires a pallet. We ship Monday through Friday. We are in the Eastern Standard Time zone. If a request for overnight shipping is made before 3:00 p.m. We can get it to you the next day. We try our best to get all packages out within 48 hours but most items will ship the next day. Please check our feedback; everyone raves about our quick shipping. We take our feedback very seriously. We offer FREE Same Day Courier Service within 100 miles of our location for ALL items with a BUY IT NOW price of $900 or more and weighing less than 100 lbs. This offer is for buyers who pay o
|
|
|
Syntron TPJO-1 Angle Deck Jogger 13 x 19
Working Syntron TPJO-1 Jogger- Heavy- Sold as-is. California buyers add 9% sales tax or resale certificate. Boxing or crating will be an additional charge. Please ask any questions before end of auction.
|
|
|
FMC SYNTRON JOST jd 4 99761 FT01-A MAGNETIC FEEDER Vibratory Tray Hopper
FMC SYNTRON JOST jd 4 99761 FT01-A MAGNETIC FEEDER Vibratory Tray Hopper There are no part numbers on the units. I am using parts numbers that match the unit close. All the units were removed from working tray shaker feeder hoppers. ALl unts just need a good cleaning. They are sold as seen as is. Units are about 25 lbs each. READ BELOW BEFORE BIDDING: You are buying the above as is as. This means don't assume anything. If you have questions ask. If it’s not listed as new in the box then don't think it is. It’s sold as seen as is. Even if the unit has been tested or removed from a working machine. Payment: PAYPAL ONLY We will ship using our ups account within three days only in the USA. All other areas will ship USPS and we will ship on Saturdays only so it could be up to 6 days depending when you buy the unit. ALmost all items were ... moreremoved from a working machine but are sold as is. Feedback: We will post POS feedback withen 30 days of your purchase. If a threat of Negative. feedback is used to get something that was not listed or service not listed we will forward the request to EBAY without notice to the buyer. We offer many vibratory Feeder Services. Service on Feeding Equipment, Refurbishing, Replacement or Re-tooling, Retrofitting and new turnkey systems. We have the largest inventory of used Vibratory Feeders you will ever find. If you have any questions regarding the above units please contact us at Feeding Concepts Inc. 317-773-2040. On Jan-18-13 at 14:12:20 PST. Seller added the following information:
|
|
|
FMC SYNTRON FMC TJ-2-B COMMERCIAL CHECK MONEY MAIL LETTER PAPER JOGGER 20" x 22"
Click Images To Enlarge Tested working paper jogger Wooden rack is cracked in the lower middle but works fine. See pictures Check out our other items! Be sure to add Second Chance IT to your favorites list to be updated on our new inventory! PAYPAL IS OUR PREFERRED METHOD OF PAYMENT We accept most major credit cards(Visa. MasterCard, and American Express) Feel free to message us with any questions or you may call us at 1- 612-467-9499 with any immediate questions. Please make payment within 4 days of purchase or an unpaid item claim will automatically be started. We are available to answer any questions you might have and respond to messages between the hours of 8:00 AM and 3:30 PM Central Standard time Monday through Friday. Auctions that end during non-business hours will be addressed as soon as possible on the next business day. 6.875% ... moreSales tax will be charged for Minnnesota residents only Most items will leave our warehouse the same or next business day after payment has been received. Shipping to Alaska. And Hawaii may be an additional charge. Tracking numbers will be uploaded to eBay as soon as a label is printed. All items have a 14 day return period unless stated"NO RETURNS" or"AS-IS" If you have any questions about this policy please ask before bidding. Please do not assume that an item includes software. Manuals, or any other accessory. Unless it is specifically mentioned. You are bidding on the item up for sale as pictured only. Ask before bidding if you have any questions. Second Chance IT is your reliable source for high quality used IT equipment. Since 1997 customers have realized incredible savings by purchasing our reliable used computers and accessories. We buy and sell all types of IT equipment including personal computers. Laptops, notebooks, servers, hard drives, networking components, and more. We work hard to maintain our high feedback rating on eBay! If you have any issues please contact us before leaving feedback. If you have equipment to sell, or questions about our l
|
|
|
Syntron magnetic feeder 7" x 24" stainless 115 vac f-t01a
one) Syntron magnetic feeder. Model F-T01A, 115 vac, 9 amp, s/n AH63599(1996) 7" x 24" chute, with 4 step perforated inner tray, polly top, twist lock plug. 24-36" height. This seems to work fine, but the rubber vibration pads have come apart and will have to be fixed before this can be used. The column adjusting nuts do not work properly. $125 shipping in the continental U.S. You can send text messages to my cellphone at 9374165497@vtext.com D-10900, 01, 02 If you have any questions. Please email me! Happy bidding! Click to View Image Album Click to View Image Album Click to View Image Album Shipping& Handling US Shipping. $125.00 truck International Shipping. $995.00 sea FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. ... moreClick Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|
Vibratory Tray Part Feeder Inline Syntron Fmc Shacker vibrator
Vibratory Tray Part Feeder Inline Syntron Fmc Shacker vibrator It can be made to feed other parts. Buyer is buying the unit as seen as is. We have over 500 used vibratory feeders bowls in stock for almost any aplication of automation. We can retool this unit or build new ones also. We offer many vibratory Feeder Services. Service on Feeding Equipment, Refurbishing, Replacement or Re-tooling, Retrofitting and new turnkey systems. We have the largest inventory of used Vibratory Feeders you will ever find. If you have any questions regarding the above units please contact us at Feeding Concepts Inc. 317-773-2040 or email us at READ BELOW BEFORE BIDDING: You are buying the above as is. if you are not sure what that means look it up AS IS) This means don't assume anything. If you have a question ask. If its not listed as new in the box then ... moredon't think it is. Its sold as seen as is. PAYPAL ONLY! We will ship using our ups account only in the USA. All other ares will ship USPS. Items are not tested. Most items were removed from a working machine but are sold as is. FeedBack will only be left if you leave pos. feedback and request it from me. EBAY has removed the sellers rights to post anything other then Pos. feedback so we will only leave it if you request it. On another not if you try to threaten use of Neg. feedback to get something that was not listed or service not listed we will forward the request to EBAY without notice. On Jan-18-13 at 13:53:53 PST. Seller added the following information:
|
|
|
Syntron Paper Jogger 14" x 24"
Apologize that it looks old but it still shakes it up! Listing it as local pickup but we will pack it in a box for you. Shipping charges will be additional. Thanks for your interest
|
|
|
Syntron Magnetic Vibrator V4 V-4-AC With Wall Plug
Thank you for looking at my auction. Up for sale is a Syntron Magnetic Vibrator V4 V-4-AC With Wall Plug. Please email me if you have any questions.
|
|
|
FMC SYNTRON PAPER JOGGER MODEL J-1 B works great TESTED checks/money VIBRATOR
UP FOR AUCTION IS A FMC SYNTRON(MODEL J-1 B) PAPER JOGGER. THIS IS A TABLE-TOP MODEL. BUT IS STILL VERY HEAVY. THE MACHINE GOES FROM 0 TO 100. ON ZERO, IT VIBRATES A LITTLE, BUT WHEN YOU TURN IT TO 100, IT VIBRATES LIKE CRAZY. IT HAS BEEN TESTED AND WORKS PERFECTLY. VERY RARE MODEL. THANKS FOR LOOKING.
|
|