|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: New Location: Chino, United States It Is Also Used for Mixing Many Kinds of Dope. 1x Stainless Steel Pneumatic Paint Bracket Mixer. Mixing Capacity:50 Gallon /200l Tank. Motor: Pneumatic. ... moreEquipped with Pneumatic Motor Saving. Safe and Explosion-proof, No Sparks.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in Package Included 1*Pneumatic Mixer All Accessories for Assembly.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing results. ... moreAre you still struggling to stir the raw material manually?.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Included 1*Pneumatic Mixer All Accessories for Assembly Warm tips: The air source of the air compressor used by the customer needs to be installed with an oil-water separator before use, otherwise a lot of moisture in the air will run into the motor, resulting in the machine stuck.
Buy It Now
Free Shipping Condition: New Location: Jamestown, United States Even though the boiler oil for your furnace has been well filtered and cleaned during its processing from crude oil, filters are still required (especially ... moreif the oil is being supplied from a steel storage tank).
Buy It Now
Condition: Used Location: Louisville, United States The Thermco gas mixer is designed to mix two non-flammable and non-corrosive gases. These accuracies are presented as typical performance for these systems. ... moreBecause the gas mixer uses a surge tank design, this type of system is ideal for applications that require maintaining a precise proportion from full mixed gas flow down to zero flow.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Warm tips: The air source of the air compressor used by the customer needs to be installed with an oil-water separator before use, otherwise a lot of ... moremoisture in the air will run into the motor, resulting in the machine stuck It is usd for paint mix in paint factory. It is also used for mixing many kinds of dope. It is also used for homogeneity,dispersing in domestic industry,food industry,medicine industry. It is safe to use without spark and anti-explosive. Specifications working air pressure: 3.0~4.0Bar Blade: 6" * 2 Shaft size: 16 * 950 mm Motor: Pneumatic Mixing capacity: 50 Gallon /200L Tank Power: 1/2 HP Blade mterial: stainless steel Axial diameter:15mm Blade diameter:160mm Interface caliber:G1/4 Total height:1050mm.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Are you still struggling to stir the raw material manually?. Are you still bothered by the poor performance of electric paint mixers?. Its 1/2 HP power ... moreand maximum 2000 rpm will greatly improve the mixing efficiency.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Package Included 1*Pneumatic Mixer All Accessories for Assembly.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Condition: Used Location: Millwood, United States ITEM# 11419 450 GALLON USED LIQUID TOTE MIXING TANK ALL CARBON STEEL. CONTINUOUS FILLET WELD CONSTRUCTION, TWO-SIDED FORKTRUCK BRACKETS, LIQUID LEVEL ... moreSWITCH, AND PRESSURE VENT. TOP-MOUNTED CHEMINEER MIXER WITH WINSMITH 920 SPEED REDUCER IS FLANGE CONNECTED TO A STANDARD 22"Ø DRUM LID. MIXER RPM = 180. 4"NPT MALE INLET CONNECTION, 1"NPT INJECTION PORT. MIXER IS POWERED BY A 3/4HP, 1725RPM, 115/230V, 60HZ, SINGLE PHASE RELIANCE DUTY MASTER MOTOR. TANK DIMENSIONS: 41"W. X 46"D. X 58"H. OVERALL HEIGHT: 6'8" FOUR AVAILABLE AT TIME OF DESCRIPTION. PRICING IS EACH. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1/2 HP 50 Gallon Pneumatic Mixer Rung Dope Tank 304 Stainless Blade Barrel Type. It is also used for mixing many kinds of dope. Safe and explosion-proof, ... moreno sparks. It is the best choice for open liquid drums.
Buy It Now
$2.99 Shipping Condition: New Location: Chino, United States Application It is widely used in aerospace manufacturing, shipbuilding, home appliances, coating, the food industry, medical treatment, paint, ink, printing ... moreand dyeing, cosmetics, synthetic leather, leather, tires, ceramics, ball manufacturing, and other industries. It is suitable for paint stirring in the spraying process, and also for stirring various coatings. Specification Color: Silver Blade Material: Stainless Steel Working Pressure: 1-3kg/ 2.20-6.61lb Power: 1/2HP Speed: 50-2000 rpm Stirring Capacity: 190L/50gal Blade Diameter: 15cm/ 5.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Application It is widely used in aerospace manufacturing, shipbuilding, home appliances, coating, the food industry, medical treatment, paint, ink, printing ... moreand dyeing, cosmetics, synthetic leather, leather, tires, ceramics, ball manufacturing, and other industries. It is suitable for paint stirring in the spraying process, and also for stirring various coatings. Specification Color: Silver Blade Material: Stainless Steel Working Pressure: 1-3kg/ 2.20-6.61lb Power: 1/2HP Speed: 50-2000 rpm Stirring Capacity: 190L/50gal Blade Diameter: 15cm/ 5.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Warm tips: The air source of the air compressor used by the customer needs to be installed with an oil-water separator before use, otherwise a lot of ... moremoisture in the air will run into the motor, resulting in the machine stuck It is usd for paint mix in paint factory. It is also used for mixing many kinds of dope. It is also used for homogeneity,dispersing in domestic industry,food industry,medicine industry. It is safe to use without spark and anti-explosive. Specifications working air pressure: 3.0~4.0Bar Blade: 6" * 2 Shaft size: 16 * 950 mm Motor: Pneumatic Mixing capacity: 50 Gallon /200L Tank Power: 1/2 HP Blade mterial: stainless steel Axial diameter:15mm Blade diameter:160mm Interface caliber:G1/4 Total height:1050mm.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Warm tips: The air source of the air compressor used by the customer needs to be installed with an oil-water separator before use, otherwise a lot of ... moremoisture in the air will run into the motor, resulting in the machine stuck It is usd for paint mix in paint factory. It is also used for mixing many kinds of dope. It is also used for homogeneity,dispersing in domestic industry,food industry,medicine industry. It is safe to use without spark and anti-explosive. Specifications working air pressure: 3.0~4.0Bar Blade: 6" * 2 Shaft size: 16 * 950 mm Motor: Pneumatic Mixing capacity: 50 Gallon /200L Tank Power: 1/2 HP Blade mterial: stainless steel Axial diameter:15mm Blade diameter:160mm Interface caliber:G1/4 Total height:1050mm.
Buy It Now
Condition: Used Location: Millwood, United States 42"Ø X 34" straight side and F&D head bottom. Heavy duty bolt-on top cover with 12"Ø ANSI 150 flange mounting. 1 1/2" FNPT side ports and a single 3"Ø ... moreflanged port on the top cover. Approximate Weight: 3,077lbs.
Buy It Now
$150.00 Shipping Condition: Used Location: New Paris, United States Carbonair Pressurized Carbon Vessel Model: PC-190 Gallon Capacity150 PSIFlow range: .5-10 gpmLocation: SPR4Tank is emptyVessel will ship via freight carrier. ... morePlease contact us for shipping details, or any other questions you may have. Flat rate freight shipping price is to a business address with forklift or loading dock
Buy It Now
$80.00 Shipping Condition: New Location: China It is also used for mixing many kinds of dope. 50 gallon Tank Barrel Mixer. Motor: Pneumatic. Mixing capacity: 50 Gallon /200L Tank. Blade mterial: Aluminum ... moreAlloy. It is usd for paint mix in paint factory.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1X Stainless Steel Pneumatic Paint Bracket Mixer. Mixing capacity:50 Gallon /200L Tank. Motor: Pneumatic. It is also used for mixing many kinds of dope. ... moreSafe and explosion-proof, no sparks. It is the best choice for open liquid drums.
Buy It Now
$125.00 Shipping Condition: Used Location: New Ipswich, United States Double Star DS-10 Ultraviolet System. INLET CONNECTION: 1/2". • Spot Free Rinse. • Inlet Low Pressure Shut-off Switch: Automatic protection for the process ... morepump should insufficient feed water pressure be available.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 1/2 HP 50 Gallon Pneumatic Mixer Rung Dope Tank 304 Stainless Blade Barrel Type. It is also used for mixing many kinds of dope. Safe and explosion-proof, ... moreno sparks. It is the best choice for open liquid drums.
Buy It Now
Condition: Used Location: Millwood, United States Constructed of stainless steel sheet. All prices are FOB Millwood WV unless otherwise noted.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Application It is widely used in aerospace manufacturing, shipbuilding, home appliances, coating, the food industry, medical treatment, paint, ink, printing ... moreand dyeing, cosmetics, synthetic leather, leather, tires, ceramics, ball manufacturing, and other industries. It is suitable for paint stirring in the spraying process, and also for stirring various coatings. Specification Color: Silver Blade Material: Stainless Steel Working Pressure: 1-3kg/ 2.20-6.61lb Power: 1/2HP Speed: 50-2000 rpm Mixing (Tank) Capacity: 200L/ 50Gal Blade Diameter: 15cm/ 5.91in Clamping Thickness: 25mm/ 0.98in Rod Length: 88cm/ 34.65in Total Height:1.13m/ 3.7ft Package Size: 118*20*20cm/ 46.46*7.87*7.87in Gross Weight: 7.5kg/16.53lb Package Included 1* Pneumatic Putty Powder Mixer .
Buy It Now
Condition: Used Location: Loris, United States This sale is for a Rutten Engineering Bolz 50 Liter Stainless Steel Pressure Storage Vessel. Rutten / Bolz. I will list what information I have and the ... morecondition of the item to the best of my ability.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: United States Are you still struggling to stir the raw material manually?. Are you still bothered by the poor performance of electric paint mixers?. Its 1/2 HP power ... moreand maximum 2000 rpm will greatly improve the mixing efficiency.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Are you still bothered by the poor performance of electric paint mixers?. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. ... moreUniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
$428.78 Shipping Condition: Used Location: Canada Precision Stainless Steel High Pressure Jacketed Collection Pot Tank 300L with Dip Tube, Coil and Drain. Vessel Side: 0F to -40F or -40C to -18C. Tank ... moreSpecifications Drain port and valve. Over Pressure Valve.
Buy It Now
Condition: Used Location: Millwood, United States 2" sanitary drain port. Jacket will not hold water. TEFC belt drive (unknown HP) to right-angle gear reducer.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Application It is widely used in aerospace manufacturing, shipbuilding, home appliances, coating, the food industry, medical treatment, paint, ink, printing ... moreand dyeing, cosmetics, synthetic leather, leather, tires, ceramics, ball manufacturing, and other industries. It is suitable for paint stirring in the spraying process, and also for stirring various coatings. Specification Color: Silver Blade Material: Stainless Steel Working Pressure: 1-3kg/ 2.20-6.61lb Power: 1/2HP Speed: 50-2000 rpm Mixing (Tank) Capacity: 200L/ 50Gal Blade Diameter: 15cm/ 5.91in Clamping Thickness: 25mm/ 0.98in Rod Length: 88cm/ 34.65in Total Height:1.13m/ 3.7ft Package Size: 118*20*20cm/ 46.46*7.87*7.87in Gross Weight: 7.5kg/16.53lb Package Included 1* Pneumatic Putty Powder Mixer .
Buy It Now
Condition: Used Location: San Diego, United States Empty Weight: 929 lbs. Tank Design Temp: -20°F to 250°F. Tank Corrosion Allowance.0000 in. Shell Thickness: 0.1874 in. Straight Side: 48 in. Top Head ... moreType: Manway Top Head. Top Head Thickness: 0.1874 in.
Buy It Now
Condition: New Location: West Palm Beach, United States New AMS 16’ Vacuum Tank with Heated Startup Section. Qty (1) 4’ Startup section of dedicated vacuum via 3 HP Vacuum Blower. Qty (1) SS Reservoir for for ... moreStartup Section. Qty (1) 3 HP Stainless Steel Water Pump for Startup Section.
Buy It Now
Condition: New – Open box Location: United States Location unless otherwise noted. Item location: South Houston, Texas, United States. South Houston, TX 77587. CIP - Door to Airport. Part#: LP00-5481-001. ... moreItem(s) are surplus and have not been tested.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Application It is widely used in aerospace manufacturing, shipbuilding, home appliances, coating, the food industry, medical treatment, paint, ink, printing ... moreand dyeing, cosmetics, synthetic leather, leather, tires, ceramics, ball manufacturing, and other industries. It is suitable for paint stirring in the spraying process, and also for stirring various coatings. Specification Color: Silver Blade Material: Stainless Steel Working Pressure: 1-3kg/ 2.20-6.61lb Power: 1/2HP Speed: 50-2000 rpm Stirring Capacity: 190L/50gal Blade Diameter: 15cm/ 5.
Buy It Now
Condition: Used Location: Morgan Hill, United States Inspections available at Morgan Hill, CA 95037. National Board Number 430, M/S legs. Doubles may require the driver to unhook 1 trailer. AS-IS, WHERE-IS?.
Buy It Now
Condition: Used Location: Millwood, United States Vessel construction: 10GA 316L stainless steel with 2B (cold roll) finish on inside surface. Jacket Construction: 12ga carbon steel with 2" foamglas insulation ... morearound shell, 2" inswool on dished heads.
Buy It Now
$9.99 Shipping Condition: New Location: Cranbury, United States Strong power 1600W:suitable for heavy duty and professional work. Max power: 1600W. Integrated design makes it easy to operate. 1 x 8mm Triangle Welding ... moreNozzle. 1 x 7mm Wide Round Welding Nozzle. 1 x 20mm Flat Slit Nozzle.
Buy It Now
Condition: Used Location: Canada DESCRIPTION Precision Electric Steam Boiler ST"Series II" ST60DJ-3520D-480-150 Manufacturer: Precision Model: ST60DJ-3520D-480-150 Year: 2006 ... moreCondition: Used Specifications: Model Number ST60DJ-3520D-480-150 Serial Number B060148 BHP 400 KW 3520 Manu. Date 05-2006 Voltage 480 Phase 3 Amps 4.234 Max WP 150 PSI For more information contact Carlton Carr at(843) 845-7433 or at carlton.carr@essindustrial.com We ship anywhere your freight handler or carrier. FOB Spartanburg SC 29303 Terms and Conditions SALES TERMS: All products are purchased under an as-is condition with no warranties or guarantees of any kind. PAYMENT INFORMATION: RBI ESS accepts Bank Wire(Transfer) PAYPAL, Certified Checks, Credit Card(3%Processing Fee) and cash in person. All items must be paid in full before they are shipped. SHIPPING INFORMATION: RBI ESS ships worldwide and uses all common carriers including USPS. DHL, FEDEX, UPS and truck freight. When requested RBI ESS will combine multiple orders to reduce shipping costs, if possible. LOCAL PICKUPS REQUIRE PAYMENT OF LOCAL SALES TAX, UNLESS EXEMPTION IS PROVIDED. Contact us@ 864 444-4348 or email ricky.ward@essindustrial.com for special shipping instructions or for scheduling a pick up at our location in Spartanburg SC. USA. RETURN POLICY: Our goal at RBI ESS is to please our customers. We do our best to describe each item accurately. If an item arrives damaged or incorrectly described. We will work with you to resolve the situation. Any item damaged or incorrectly described that is returned must be returned within 7 days of receipt or no refund will be granted. Any refund given will be less all shipping costs. If there is a problem, please call us@ 864 641-7458 or email angela.egnor@essindustrial.com. Mac DB: 1533-BD
Buy It Now
$194.22 Shipping Condition: Used Location: Madawaska, United States Accessories include: ½” quick-release fitting, pressure regulator, 2 pressure gauges, nozzle and 5/8” hose. The item you receive may be different from ... morethe actual item in the photo in the case of multiple quantity lots.
Buy It Now
Condition: New – Open box Location: Millwood, United States Manufactured in 2001, made from series t-441 alloy with welded construction. Apc pharmaceutical/ hygienic portable pressure vessel. 18"ø with 13" straight ... moreside, dished head top cover. Ft. And 10 gallon capacity.
Buy It Now
Free Shipping Condition: New Location: Chino, United States 50 Gallon 4" Blade Pneumatic Mixer Rung Dope Tank Barrel Type 2Stainless steel. 1/2 HP 50 Gallon Pneumatic Mixer Rung Dope Tank 304 Stainless Blade Barrel ... moreType. It is also used for mixing many kinds of dope.
Buy It Now
Free Shipping Condition: New Location: United States Are you still struggling to stir the raw material manually?. Are you still bothered by the poor performance of electric paint mixers?. Its 1/2 HP power ... moreand maximum 2000 rpm will greatly improve the mixing efficiency.
Buy It Now
Free Shipping Condition: New Location: Los Angeles, United States Are you still struggling to stir the raw material manually?. Are you still bothered by the poor performance of electric paint mixers?. Its 1/2 HP power ... moreand maximum 2000 rpm will greatly improve the mixing efficiency.
Buy It Now
$1800.00 Shipping Condition: New Location: Miami, United States Our systems are sized for any facility scale so that you can run your extraction process without bottlenecks. Non-Thermal Solvent Recovery. As low as ... more1 Cent (USD) or less per Gallon of clean solvent processed.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
$9.99 Shipping Condition: New Location: Prior Lake, United States This Varem Pre-Charged Pressure Tank saves energy and increases the life of your pump. Tank features durable, corrosion-resistant stainless steel construction.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Pneumatic Paint Mixer Air Agitator Painting Blender For 50 Gallon Tank Barrel. Are you still struggling to stir the raw material manually?. Are you still ... morebothered by the poor performance of electric paint mixers?.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specifications Material: Stainless Steel, 304 Stainless Steel Color: Silver Style: Modern Surface Treatment: Baking Varnish Assembly Required: Yes Power: ... more1/2HP Stirring Capacity: 190L/50gal Speed: 50-2000RPM Working Pressure: 1-3kg/2.2-6.6lbs Gross Weight: 6kg/13.22lbs Net Weight: 5.35kg/11.8lbs Applicable Barrel Thickness: ≤24.3mm Mixing Rod Length: 88cm/34.64in Pump Length: 25.5cm/10in Impeller Diameter: 14cm/5.5in Product Length: 1.135m/3.72ft Package Size: 114*17*14.5cm/44.88*6.7*5.7in Package Included 1*Pneumatic Mixer All Accessories for Assembly.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Application It is widely used in aerospace manufacturing, shipbuilding, home appliances, coating, the food industry, medical treatment, paint, ink, printing ... moreand dyeing, cosmetics, synthetic leather, leather, tires, ceramics, ball manufacturing, and other industries. It is suitable for paint stirring in the spraying process, and also for stirring various coatings. Specification Color: Silver Blade Material: Stainless Steel Working Pressure: 1-3kg/ 2.20-6.61lb Power: 1/2HP Speed: 50-2000 rpm Stirring Capacity: 190L/50gal Blade Diameter: 15cm/ 5.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Application It is widely used in aerospace manufacturing, shipbuilding, home appliances, coating, the food industry, medical treatment, paint, ink, printing ... moreand dyeing, cosmetics, synthetic leather, leather, tires, ceramics, ball manufacturing, and other industries. It is suitable for paint stirring in the spraying process, and also for stirring various coatings. Specification Color: Silver Blade Material: Stainless Steel Working Pressure: 1-3kg/ 2.20-6.61lb Power: 1/2HP Speed: 50-2000 rpm Mixing (Tank) Capacity: 200L/ 50Gal Blade Diameter: 15cm/ 5.91in Clamping Thickness: 25mm/ 0.98in Rod Length: 88cm/ 34.65in Total Height:1.13m/ 3.7ft Package Size: 118*20*20cm/ 46.46*7.87*7.87in Gross Weight: 7.5kg/16.53lb Package Included 1* Pneumatic Putty Powder Mixer .
Buy It Now
Free Shipping Condition: New Location: Chino, United States Description Are you still struggling to stir the raw material manually? Are you still bothered by the poor performance of electric paint mixers? Then ... moreit's time to use our pneumatic mixer. Its 1/2 HP power and maximum 2000 rpm will greatly improve the mixing efficiency. It can operate for a long time under sufficient air pressure without generating sparks, making it more durable, stable, and safer than an electric mixer. Key Features Highly Efficient: Compared with traditional manual mixing tools, its 1/2 horsepower power and a maximum speed of 2000 rpm can greatly improve efficiency and save time, making mixing effective, uniform, fine, and smooth. Uniform Mixing: The pneumatic mixer with a clip provides you with flexible mixing angles and impeller heights, thereby achieving good mixing.
Buy It Now
Free Shipping Condition: New Location: Chino, United States It is also used for mixing many kinds of dope. Safe and explosion-proof, no sparks. It is the best choice for open liquid drums. The mixer is easily clamped ... moreto the side of the bucket and the chucking angle can be adjusted.
Buy It Now
Free Shipping Condition: New Location: United States Are you still struggling to stir the raw material manually?. Are you still bothered by the poor performance of electric paint mixers?. Its 1/2 HP power ... moreand maximum 2000 rpm will greatly improve the mixing efficiency.
|
|
|
|
80417 USED: Alloy Products pressure tank, 2 gallons, 316L stainless steel. Tank
Click To Enlarge- USED: Alloy Products pressure tank. 2 gallons, 316L stainless steel. Tank rated for 50 psi at 100 deg F. 8" diameter x 6" straight side, dished top and bottom. Top opneings: 1) 3-1/2" tri-clamp, 3) 1/2" tri-clamp; 1/2" tri-clamp center bottom outlet. Tank includes stainless steel stand. ref# 80417. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for ... moreshipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
44962003 Unused- Northland Stainless Pressure Tank, 1720 Gallons, 304 Stainless
Click To Enlarge- Unused- Northland Stainless Pressure Tank. 1720 Gallons, 304 Stainless Steel. 54" Diameter x 168" straight side, dished top and bottom. Internal rated full vacuum/54 psi at-20 to 250 degrees F. Openings: top(2) 2" side 1-1/2" 3) 3" 6" 8" 24" manway with davit arm cover; bottom 2" 8" center. Mounted on(4) stainless steel legs, approximately 43" discharge height. National Board#3887, serial#07-21588, built 2008. ref# 44962003. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment ... morecosts $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
DEVILBISS STAINLESS STEEL QMS PAINT PRESSURE TANK QMS-5533 AIR DRIVEN AGITATOR
DEVILBISS 5 GALLON STAINLESS STEEL PAINT TANK WITH DUAL REGULATION. INCLUDING 1 EXTRA SENSITIVE REGULATOR, SET UP FOR BOTTOM OUTLET FM APPROVED WITH AIR DRIVEN AIR AGITATOR MODEL QS-5012. TANK DIMENSIONS 14" DIA. X 20 5/16 TALL(TANK ONLY) SHIPPING WEIGHT 120 LBS. ALSO INCLUDED IS A GRACO FINEX SPRAY GUN AND APPROX 25' OF AIR AND FLUID HOSES. WILL SHIP UPS OR FED EX
|
|
|
DEVILBISS QMG GALVANIZED PRESSURE TANK LOT OF 2
DEVILBISS QMG GALVANIZED PRESSURE TANK LOT OF 2 GUARANTEED NOT DOA MAX WORKING PRESSURE 110 PSI TANK IS LINED*CLICK THE LINK BELOW FOR MORE INFORMATION* MANUFACTURE'S WEBSITE Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
LUXFER SCUBA DIVING / SNORKELING AIR PRESSURE TANK 3000 PSI
UP FOR BID A LUXFER SCUBA DIVING/ SNORKELING AIR PRESSURE TANK 3000 PSI. COMES AS SEEN IN THE PICTURES. COMES WITH EVERYTHING SHOWN IN PICTURES. PLEASE SEE ALL PICTURES. Please examine photos carefully for more information and do not hesitate to contact me with any questions that you may have regarding this item Thank you. I AM SORRY BUT I DO NOT SHIP TO HAWAII. ALASKA, PUERTO RICO. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. THANK YOU AND HAVE GREAT DAY.
|
|
|
2GALLON BINKS PRESSURE TANK PAINT OR GLUE SPRAYER JUST NEEDS A LITTLE CLEANING
RETIRED NO LONGER NEED IT WORKS LIKE CHAMP.
|
|
|
BINKS PRESSURE TANK PAINT POT GAST MIXER 2.8 GALLON PAINT SPRAYER NR! USED SAVE
Hello Thanks for taking the time out to look at another auction from Lexismomma143 ebay# 1 no reserve auctions.All items are new unless noted above they also all come from a smoke& pet free house.Please ask all question before bidding as all items are sold as is and there are NO RETURNS. S\H(Bubble wrap& carboard box& tracking# U.S.A.$50.00 PAYPAL ONLY! THE RED HOSE IS NOT INCLUDED! Sale is for One(1) USED BINKS PRESSURE TANK PAINT POT GAST MIXER 2.8 GALLON PAINT SPRAYER This has some scratches shown in photos The inside has some light pitting Manufacturer PDF- This comes as shown Specs; Manufacturer- Binks Material- Stainless Steel Lid. Wetted Lid parts, Zinc Plated tank shell Capacity- 2.8 Gallon Motor- Gast 2AM
|
|
|
41581004 Used- A-L Stainless Pressure Carbon Filter Tank, 1500 gallon, stainless
Click To Enlarge- Used- A-L Stainless Pressure Carbon Filter Tank. 1500 gallon, stainless steel, vertical. Approximately 72' diameter x 76' straight side, 2 to 1 elliptical top and bottom. Internal rated 100 psi at 180 deg F and–20 deg F at 100 psi. 1) Inverted internal dished filter plate with(33) 3/4' strainers. Openings: top 3' 1' 14' x 18' oval manway; side(3) 1' 4' center 1' 3' center bottom outlet. Mounted on 4 stainless steel legs. ref# 41581004 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions ... moreAll items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
41581001 Used- All-Weld Pressure Carbon Filter Tank, 1500 gallon, 304L stainless
Click To Enlarge- Used- All-Weld Pressure Carbon Filter Tank. 1500 gallon, 304L stainless steel, vertical. 72' diameter x 76' straight side, 2 to 1 elliptical top and bottom. Internal rated 100 psi at 300 deg F and–20 deg F at 100 psi. 1) Inverted internal dished filter plate with(33) 3/4' strainers. Openings: top 3' 1' 14' x 18' oval manway; side(3) 1' 4' center 1' 3' center bottom outlet. Mounted on 4 stainless steel legs. ref# 41581001 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold ... moreare FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13fc5901eae-0x105-
|
|
|
HALE HP100 SERIES HIGH PRESSURE TRANSPORTABLE PUMP / W 220 GAL TANK SKID BASE
For Sale! HALE HP100 SERIES HIGH PRESSURE TRANSPORTABLE PUMP/ W A 220 GAL TANK SKID BASE( DESIGNED FOR WILD-LAND FIRE FIGHTING AND ATTACKING FIRE SUPPRESSION. 220 GAL TANK SKID BASE. MODEL HP100 SN-99B0422. DESIGNED FOR WILD-LAND FIRE FIGHTING AND ATTACKING FIRE SUPPRESSION. Here is more inforamtion from the manufactures website. Technical Data: MAX FLOW, 160 GPM, MAX PRESSURE, 290 PSI, Length(Inches) HPT 27-5/8; HPW 28; HPX 21; HPXB 25, Width(Inches) HPT 19-1/4; HPW 10-5/16; HPX 18; HPXB 17-1/2, Height(Inches) HPT 20-1/2; HPW 21-15/16; HPX 20; HPXB 20, Weight(Pounds) HPT 171; HPW 193; HPX 157; HPXB 169, Suction HPX& HPXB, 2" Female NPT, Suction HPT& HPW, 2" Male NH Thread, Discharge- HPX and HPXB, 1-1/2" Female NPT, Discharge HPT and HPW, 1-1/2" Male NH Thread Swivel valves swings 175 degrees for ease of hose ... morelayout, Call. Text or email with questions 714 658 5390 ocmachinery at gmail.com We can help with freight and local delivery.
|
|
|
Faber Steel LP 85 Scuba Tank Low Pressure
This is a gently used low pressure 85 tank. Its specs are for 2400PSI. But when slightly overfilled to ~2600PSI, it'll last forever, and will be much, much lighter than a HP tank of comparable size. I've had this tank since 2010. Used it on approximately 5, 60-minute dives in fresh water only. In great condition. Thermo DIN valve, can be converted to yolk style with adapter(not included) Comes with valve cover and tank boot(has a round bottom otherwise) Last hydro date is 2010(see pictures) so you are good to go until 2015. Last vis inspection was in 2011, so you will have to get a vis(~$20) before a LDS will fill this for you. Awesome tank, just no time to use anymore! Any questions please ask. Local pickup is welcomed, I can meet you on the highway. FOR SHIPPING- I will ship with valve on and about 500 psi. Please calculate your ... moreown postage- 40lbs. 31x10x10 inches from 06488. Add insurance costs(~$5) to your total, as I am no longer responsible once it arrives at the post office. Posted with
|
|
|
Luxfer Tank. Dated 2012. Scientific Gas Paintball Rocket High Pressure Cylinder
Luxfer TC-3ALM153 DOT 3LA2216 Aluminum tank. Free delivery with 48 continental States. Please use eBay contact seller message format for quote to other zones or any questions.
|
|
|
M97759 Perry Products Corp. 50PSI @ 300°F Jacketed Pressure Tank
M97759 Perry Products Corp. 50PSI@ 300°F Jacketed Pressure Tank(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# M97759 This Perry Products Corp. 50PSI@ 300°F 35GAL.P.V Stainless Steel Jacketed Pressure Tank appears to be in good/fair cosmetic condition. Showing signs of wear and previous use. The Tank looks to be pretty clean internally, and has inner dimensions of 27¾”x20½” and there is an 11" Flange which seals the top. However, I lack the knowledge and proper equipment needed to formally test this unit; therefore it will be sold as is. Please see pictures for more details) Approximate overall unpacked dimensions: 23"x23"x48" Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated ... moreterms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 176.00 Pounds Buyer pays freight plus a fixed handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared pa
|
|
|
Vtg US Divers Aqua Lung Scuba Tank Pressure Gauge Checker Tank Tester 3000 PSI
This is a Vintage US Divers Aqua Lung Scuba Tank Pressure Gauge Checker Tank Tester 3000 PSI. It is in great cosmetic condition with some wear from use and age. Included are the gauge and original box. Please have all equipment purchased second hand professionally inspected before used. Thank you!
|
|
|
Alloy Products Corp Pressure Vessel 316L Stainless Steel UM Tank 120 PSI @ 80 F
Search our eBay Store! Alloy Products Corp Pressure Vessel 316L Stainless Steel UM Tank 120 PSI@ 80 F SKU: JV-HAN-B-ALP316LIPATANK Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Alloy Products Corp Pressure Vessel 316L Stainless Steel UM Tank 120 PSI@ 80°F. Material: 316L Stainless Steel. MAWP: 120 PSI@ 80°F(8.3 Bar 27°C) MDMT-20°F@ 120 PSI. Fittings: ¼” NPT. Physical Condition: Good- Minor scuffs/scratches. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. Dimensions(L" x W" x H" 7-1/2 x 6-1/8 x 8-3/8. THE FDA DISCLAIMER ... moreBELOW IS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates.
|
|
|
Alloy Products Corp 3 Gal Pressure Vessel Stainless Steel UM Tank T304 9" X 12"
Alloy Products Corp. Pressure Vessel Stainless Steel UM Tank T304 9" X 12" 3 Gal 140 psi max. WP 100F Temperature-20F 140 psi Excellent physical and cosmetic condition Product description from vendor: Pressure Rated for full vacuum. Every APC pharmaceutical/hygienic portable pressure vessels and process vessel meets the ASME"U" or"UM" Code Section VIII, Division 1. Fittings& Accessories APC vessels can be equipped with virtually any fitting or accessory your application or process requires. Including: Mixers, Sight glasses, Level gauges, Manways, Sanitary pressure relief valves and gauges. And more, Vessel fittings are sanitary-clamp type or equivalent in order to CIP or SIP. With the length-to-diameter ratio of each fitting not exceeding 2.0 whenever feasible. All fittings and accessories are located in ... morepositions that enhance vessel cleanability and sterility. By bidding on this auction you agree to the following terms: It is buyer’s responsibility to fully comply the regulation by the U.S. Food and Drug Administration and state and local regulatory agencies upon purchasing this item. The buyer will not hold the seller responsible for the appropriate or inappropriate use of this device either by the user or a third party. Once purchased. It is the sole responsibility of the purchaser to assume any and all liability from the use of this device. What you see in the picture(s) is what you get nothing more nothing less. Test results of item(s) in auction are described to the best of our ability in the ad and assuming buyer understand the nature of this item. Payment is to be received within ten days of close of auction. Should payment not be received within ten days the item will be re-listed. Shipping insurance purchased for value over $250 purchasing. Buyer must notify seller within 48 hours of receipt of a damaged shipment. Returns are only allowed under cases of gross misrepresentation in the ad. Such claims of misrepresentation must be filed within 3 days of receipt of shipment
|
|
|
Spartanburg Challenger VI 10 Gal Pressure Tank
Beer and Homebrew Enthusiasts- A Spartanburg Challenger VI 10 Gal Pressure Tank. This tank was used by a home brewer previously. The tank is in great condition with no dents or dings in the tank. O ring looks to be in good condition also. Measures approximately 12"x12"x25" Sold"as is" HE133) QUESTIONS. ANSWERS& FEEDBACK THANK YOU very much for visiting the Pace& Hong Auctions eBay store. Our auction house receives a wide variety of consignments and each one has special qualities. We try our best to carefully describe listings but sometimes there are details that elude us or need further clarification. If you have a question. We will be happy to provide assistance. Please contact us first through the eBay email system. If you would like to leave a phone message for any reason, give us a call at 1-866-305-6799 ... moreExt. 3 and leave your name and phone number. We will return your call as soon as possible and get you the information you need. THE IMPORTANCE OF eBay FEEDBACK TO BOTH SELLERS AND BUYERS eBay uses a 5-STAR FEEDBACK SYSTEM called Designated Seller Ratings that is very important to both Sellers and Buyers. It rates our joint performance during transactions. Even though we strive for 5-star service. Sometimes in life there can be unintended challenges. Our goal is to satisfy you and make the transaction a straight-forward, professional and enjoyable experience. If for any reason you have an issue with your purchase, please let us know before you leave feedback. We will do everything we can to remedy the situation, hopefully resulting in your being able to provide us with this 5-star overall rating. We sincerely appreciate your effort in this regard and we approach the feedback we give to our customers in the same responsible manner. Thank you very much. The Staff of Pace& Hong Auctions
|
|
|
VINTAGE COLEMAN RADIANT HEATER 4 5 5A 16 GAS FUEL TANK WORKING PRESSURE GAUGE
FOR YOUR CONSIDERATION IS A VINTAGE PUMP UP FUEL TANK. I HAVE BEEN TOLD IT WENT TO A COLEMAN RADIANT HEATER SUCH AS A NO. 4. 5, 5A OR 16, HOWEVER I'M NOT AN EXPERT. THIS TANK IS USED AND IN FAIR CONDITION FOR PARTS OR REPAIR. DON'T LET THIS ONE GET AWAY!
|
|
|
LOT OF FOUR VINTAGE WELDING PRESSURE REGULATOR TANK WRENCH
HI UP FOR SALE IS THIS LOT OF FOUR VINTAGE WELDING PRESSURE REGULATOR TANK WRENCHES. THAT ARE IN GOOD WORKING CONDITION, IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. THANK YOU AND HAVE A GREAT DAY! Check out my! Be sure to add me to your! 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-13fd53b85e8-0xe4-
|
|
|
Seacraft Industries Inc. Tank Pressure Gauge Checker Vintage Scuba
Seacraft Industries Inc. Tank Pressure Gauge Checker Vintage Scuba. Nice collectable Guage with Dive flag on dial. Initials etched in yoke. Shipping $5.00.
|
|
|
CROSS FIRE HIGH PRESSURE 68/4500 CARBON FIBER TANK 5 YR NEW HYDRO EMPIRE COVER
CROSSFIRE 68/4500 HPA TANK Up for sale is a CrossFire 68/4500 HPA Air Tank. This is a fixed. High pressure tank for use on almost all markers. CrossFire is known for making some of the most consistant regulators on the market and this is no different. This tank and regulator setup will give you between 1200 to 1500 shots per fill. This CrossFire 68/4500 Air Tank is used but as you can see from the pictures. Is in excellent shape. Minor scratches on the tank and regulator from normal use. The Empire Cover has some moderate wear and is missing a couple of the rubber accents from play. This tank was recently hydro tested and is good til 05/2018. If you are looking for a great tank for a great price. Then you've found it! Thank You for looking! Be sure to check out my other auctions for more great deals! I do not sell junk like some others ... moreon ebay. All my items are tested before listing to ensure that they work properly. Check my feedback and bid with confidence! Check back often to see what's new! International Bidders Welcome! Shipping and Handling Extra* Powered by The free listing tool. List your items fast and easy and manage your active items. Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
|
4 GALLON CAPACITY SCUBA DIVING GEAR PRESSURIZING PRESSURE POT TANK
SCUBA DIVING GEAR PRESSURIZING PRESSURE POT TANK 4 GALLON CAPACITY INSTRUCTIONS INCLUDED PERMA-CAL INDUSTRIES DIAL INDICATING PRESSURE GAUGE P/N 201FTM89Y01 0-300 PNEUMO MEASUREMENTS: 20" x 19" x 20" EMAIL FOR WEIGHT CALIFORNIA RESIDENTS PAY 8% SALES TAX PLEASE EMAIL FOR LOCAL PICK UP TIMES AND FREIGHT CHARGES. BUYER IS TO UNDERSTAND OUR TERMS AND CONDITIONS PRIOR TO PURCHASE
|
|
|
Suunto Wireless Tank Pressure Transmitter, D6, D4, D9 Vyper
Used Suunto Transmitter excellent condition. We used this with a D9& a vyper. I have not used it for about 8 or 9 months so I am not sure if its working or it might need a battery change. Being sold as is. Please as any question. Thanks for looking Posted with
|
|
|
Kalibur, High Pressure, Push to Fill, Paintball HPA tank fill station
This is a used Kalibur. High Pressure, Push to Fill, Paintball HPA tank fill station. I don't usually offer items if I'm not sure if they work so this is offered for parts only. It is complete. I did some minor disassemble to get it to fit in as cheap a flat rate shipping box as I could. I'm proud of my feed back rating. Please contact me before posting a problem. USA shipping only please. Thanks for looking.
|
|
|
Alloy Products 316 Stainless 5 Liter Pressure Tank 4 1/4 NPT Ports
This is a used tank in good condition. It has four 1/4 inch NPT threaded ports. It has a five liter max capacity 100 PSI at 135 degrees F. This was used for distilled cleaning water. It has bronze ball valves on two of the ports. See the item photos above for the actual contents of the auction and the exact condition of the item elements. You will receive the actual items in the photo. Click on the"Red Door" Icon and visit our ebay store for more great deals! We make every attempt to describe auction item correctly and provide pictures for your review. If you have any questions. Please email us before you bid. We are using the eBay shipping calculator to offer a fair shipping cost to this item. To make sure you are getting an accurate quote via the eBay shipping calculator. Make sure your zip code is the default zip code when calculating ... morethe shipping cost for this item. If you wish to make additional purchases for which you would like to request combined shipping, just email us! We welcome international trade. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as‘gifts’ US and International government regulations prohibit such behavior. All international buyers are responsible for any additional shipping and handling charges, crating costs, and any other costs arising from cross-border trade with us. For your security. We reserve the right, but are not obligated, to ship only to your PayPal Confirmed Address when paying via PayPal Return Policy•All items are sold AS IS. Returns are accepted ONLY if the item is not as described in the auction description and auction photographs.
|
|
|
Stainless Steel portable Fermentation/bio-reactor pressure tank
31 gallon fermenter. This is a pharmaceutical grade stainless steel tank. Used to ferment beer. Works great. In great condition. Has heavy duty wheels so it can be easily moved.
|
|
|
vintage SCUBA shop Dacor pressure gauge for compressed air tank 3000psi diving
Here is an old Dacor compressed air pressure gauge. It does work. I hooked it up to a tank with about 2000psi in it[see last photo] It was with other scuba gear from the 1960s. It is about 7" long with a 2-1/8" diameter gauge. It has some wear. See my other auction for a 1962 regulator.
|
|
|
KC-1011, EVANS & SON 2500 GALLON 304SS HORZ PRESSURE TANK
Description UP FOR SALE IS INVENTORY# KC-1011. EVANS& SON 2500 GALLON 304SS HORZ PRESSURE TANK. NATIONAL BOARD# 470. S/N: C-90-2010. RATED 50 PSI@ 350 DEGREES(F) 48" I.D. CONDITION OF ITEM 1) NEW AND IN BOX 2) NEW BUT NO BOX X 3) USED. AS-IS 4) FOR PARTS ONLY Postage and Handling All items are shipped out United Parcel Service(UPS) Price based upon weight and location. Equipment Recovery Corp can ship to a PO Box. With US Postal Rates applying. To determine shipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC will ship UPS to Canada with buyer responsible for all customs and international fees applying. Freight Items over UPS weight and size restrictions will be sent via common carrier. Customer is responsible for the freight charge. Unloading freight and/or picking up freight at terminal if possible. ... moreERC will work with customer in trying to find the most cost effective way of shipping. ERC will not ship common carrier Internationally. Store Hours/ Local Pickup Equipment Recovery Corp. is open Monday through Friday 8am-4pm. Saturday by appointment. Any of our items can be picked up to save on shipping charges. 800-372-2408. Invoicing Invoices will be sent normally within 24 hours of auctions end. ERC has an Ebay store where more inventory is listed and offered for sale. Please check out our great deals on used equipment each week. Customer Service OUR GOAL IS COMPLETE CUSTOMER SATISFACTION. Our items are used and sold“as-is” However we strive to make every customer happy and satisfied. 800-372-2408. Created by eBay Blackthorne ver. 3.2.169.0
|
|
|
44888002 Used- Walker Stainless Pressure Tank, 150 Gallon, 316L Stainless Steel,
Click To Enlarge- Used- Walker Stainless Pressure Tank. 150 Gallon, 316L Stainless Steel, Vertical. 34" Diameter x 34" straight side, dished top and bottom. Internal rated Full Vacuum& 120 psi at 300 degrees F. Openings top 18" man way with cover. 2" Tangential center bottom outlet. Mounted on 4 stainless steel legs with casters. Serial# 3987, National Board# 1189, built 1987. ref# 44888002 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items ... moreoffered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
44888001 Used- Precision Stainless Pressure Tank, 1000 Gallon, 304L Stainless St
Click To Enlarge- Used- Precision Stainless Pressure Tank. 1000 Gallon, 304L Stainless Steel, Vertical. 66" Diameter x 60" straight side, dished top and bottom. Internal rated 25 psi at-20 to 350 degrees F. vacuum design to 14.7 psi. Openings top(3) 3" 2) 4" 8" drive, 20" man way with cover. 3" Center bottom outlet. Mounted on 4 stainless steel legs. Serial# 5605, National Board# 3942, built 1992. ref# 44888001 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless ... moreotherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
Crossfire 68/4500 HPA / Nitro High Pressure Carbon Fiber Tank Recent Hydro
Recent hydro 03/2013. 68/4500 Crossfire High Pressure Regulator Carbon Fiber Tank Nice carbon fiber tank with no problems. Please note If you are bidding. Please pay within three days of purchase. As after the fourth day of unpaid item. The item will automatically be forwarded to Ebay as an unpaid claim. Thank you for looking and good luck in bidding f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13fea403ac7-0x104-
|
|
|
Gast 1/4 HP Vacuum Pump 0522-V184T-G18DX w/ Pressure Tank 1725 RPM
Gast 1/4 HP Vacuum Pump 0522-V184T-G18DX w/ Pressure Tank 1725 RPM Found at a local estate sale. In excellent cosmetic and working condition. GE ¼ HP motor 1725 RPM Picture shows complete motor specs Check out my other items! SHIPPING– PLEASE NOTE My items Ship within 1- 3 Days of Payment Received Many of my Items are unique and require care in packaging. My goal is that you receive your item promptly and in one piece. INTERNATIONAL AND CANADIAN BIDDERS ARE WELCOMED NOTE– SOME COUNTRIES HAVE A SIZE LIMITATION OF 79” OF TOTAL GIRTH WHICH IS LENGTH PLUS THE TOTAL INCHES AROUND THE HEIGHT AND WIDTH. PLEASE CONTACT ME ON LARGER ITEMS BEFORE BIDDING TO MAKE SURE YOUR ITEM WILL BE ABLE TO BE SHIPPED TO YOU Money back Guarantee if not working or you are not 100% satisfied with this item as described( As Always Original shipping charges are ... moreonly refunded for non working items. Your return shipping costs are not refundable) SHIPPING AND HANDLING- Use shipping calculator for costs
|
|
|
MSA Ultralite II Air Tank 5000 psi 3000 SCBA High Pressure Regulator (3)
MSA Ultralite II Air Tank 5000 psi 3000 SCBA High Pressure Regulator(3) MSA Ultralite II* FREE SHIPPING* Tank holds pressure. Tank is currently pressureized with air but will be shipped empty. Pressure Regulator seems to work by testing the gold knob when pressurized. Air Tank has pressure rating of 5000psi Air Tank Guage has max. 3000 psi Regulator guage has max. 3000psi The date for the last hydrostatically test is not legible. Air Tank. Harness and Pressue Regulator all show signs of wear. This is a surplus item from a local fire department. Payment is due within 3 days of the end of the listing. Please contact me if you should have any concerns with payment before the listing ends. We always try to work with people so if you anticipate a delay in payment please contact us through ebay. If you don't hear from you we will relist the ... moreitem. We ship out our items within 2 day of payment being made. We don't ship on the weekends. We ship our items fast with tracking to ensure a prompt delivery. If you should have any concerns please feel free to contact us. We would like to make you shopping experience with us an enjoyable one. If for any reason you are not satisfied with your item. Please contact us through ebay messaging to allow us an opportunity to rectify the situation before opening a case or leaving negative feedback. Thanks Some items that we list are overstock/returned store items or government surplus. They may show signs of some wear. We always provide full descriptions of an items condition that we are aware of. Please understand that some condtions may appear after continued use that we didn't observe. Thank you for checking out our auctions. As you can tell we are a new seller and establishing a fantastic feedback rating is our goal. If you should have any questions please feel free to contact us through ebay messaging. If you would like to speak to us directly please send us a message and I will forward you out phone number so we can speak. supreme. Supremewidgets. Supremeauctiononlinesof
|
|
|
Paintball co2 tank 14oz Chrome High Pressure Tank
14 oz high pressure chrome-moly cylinder Posted with
|
|
|
Pure Energy HPA High Pressure Air Carbon Fiber Paintball hpa Tank 4500psi
Up for bid is this Pure Energy HPA High Pressure Air Carbon Fiber Paintball Tank 4500psi Previously Used. See pictures for accurate condition. Sold As Is. Good Luck. No Reserve! The auction includes what is pictured. If you have an issue PLEASE CONTACT US FIRST! We ship with FedEx to lower 48 States. We DO NOT ship to HI. AK, AFO, APO or MPO Addresses. The maximum handling time is 3 business days. Sorry. No International Bids Accepted- we do not ship internationally. We only accept Paypal payments. No other payment methods will be accepted unless you are doing a local pick-up. Winning bidders who want to do a local pick-up can pay by cash or Paypal. Local pick-up customer will not be charged shipping and handling. But will be subject to a 7.63% sales tax. Return Policy: We accept returns within 7 days. Upon receipt of the return we issue ... morea full refund including original shipping cost. We do not pay for returned shipments.
|
|
|
Binks Graco Pressure Pot Paint Gun Sprayer Tank
Binks Pressure Pot for Painting Feel free to call or email with any questions. 931-433-1939 or 931-625-5760
|
|
|
SCUBA DIVE DIVING PRO SUB PROSUB GAUGES CONSOLE DEPTH W/ TELLTALE TANK PRESSURE
Up for sale is a Prosub scuba dive gauge console. 160 feet depth gauge with telltale. 5000 psi tank pressure gauge. In very nice cosmetic shape. Works fine. The console rubber where it meets the hose has some small dry cracks. As with all used Scuba gear, you should take it in to your dive shop for service/cleaning/checking before use. Please see my other auctions for more scuba. Thanks, any questions, feel free. Buyer to pay shipping and handling charges.PAYMENTS MUST BE RECEIVED WITHIN 5 DAYS OF AUCTION END DATE! SHIPPING INFORMATION: Should this auction be open to international shipments, buyer is responsible for customs clearance and any duty, local taxes or fees. These are normally charged directly by shipping company and are not part of my shipping quotes. I ship International Priority ONLY. First Class International does not have tracking, ... moreso I DO NOT send First Class International. If you are not OK with this, DO NOT bid please. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
SCUBA DIVE DIVING OCEANIC GAUGES CONSOLE DEPTH W/ TELLTALE TANK PRESSURE
Up for sale is a Oceanic scuba dive gauge console. 200 feet depth gauge with telltale. 4000 psi tank pressure gauge. In very nice cosmetic shape. Works fine. As with all used Scuba gear, you should take it in to your dive shop for service/cleaning/checking before use. Please see my other auctions for more scuba. Thanks, any questions, feel free. Buyer to pay shipping and handling charges.PAYMENTS MUST BE RECEIVED WITHIN 5 DAYS OF AUCTION END DATE! SHIPPING INFORMATION: Should this auction be open to international shipments, buyer is responsible for customs clearance and any duty, local taxes or fees. These are normally charged directly by shipping company and are not part of my shipping quotes. I ship International Priority ONLY. First Class International does not have tracking, so I DO NOT send First Class International. If you are not OK ... morewith this, DO NOT bid please. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
1,150 Gallon SS Pressure Rated Tank, Dome Top Dish Bottom
1.150 Gallon SS Pressure Rated Tank, Dome Top Dish Bottom Last used in a Distillery MFG by ADM Serial#T-03386 NB#03386 Pressure Rated tank MAWP 15 PSIG 300^ F Max Temp rating Dimensions 60" dia x 96" sidewall Overall Height 148" 34" Legs 12" Dome top 12" Dish Bottom 4" Center discharge with 8 bolt ANSI Flange fitting Multiple inlet ports Additional side ports and ANSI flange fittings 2- site glass mounted on side of tank 20" Side manway entrance door Last used in a Distillery Very Nice Condition! For More Information. EMAIL tesales@used-equipment.com Call Kevin at(903) 355-1409
|
|
|
2009 Karcher SSG-503537E Towable Hot Pressure Washer w/ Burner & Water Tank
SKU: 640306 A: 0015000000SbnmU O: 0065000000NzHD9 PA: or View Photo Gallery. Request Freight Estimate. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Karcher SSG-503537E Portable Hot Pressure Trailer in excellent operating condition. This unit is being sold as part of a standard fleet rotation package from a leading rental company. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Bid with confidence– 100% buyer satisfaction guaranteed and inspections always available. Low-cost shipping. Containerizing and port-access ... moreavailable for US and International shipping- for estimates click the Freight Quote Box below. Overview: Make: Karcher Model: SSG-503537E Year: 2009 Hours: 101 indicated on functional meter Serial Number: 15756030-162209 VIN# 1L9FC15209C041008 Title: N/A- Sold with bill of sale only Transport Weight: approx. 3.500 lbs approx Transport Dimensions: 197"L x 84"W x 64"H Features/Specifications: Honda gas engine- 20 HP Electric start 440.000 BTU burner 3500 PSI 4.7 GPM Firing rate: 2.25 GPH Hose reels Pressure washer wand with interchangeable tips On-board water tank(approx. 300 Gal. Double Axle Surge Brakes 2" ball hitch Operators manual Inspection Report: General Comments Overall Appearance. Very good- well maintained, Overall Condition. Very good- fully functional, Chassis Paint. Good, Frame Good Deck Good- steel Brakes. Operational, Lights. One rear center light broken- see photos- Operational at time of decommission- untested by bidadoo, Comments. Chassis is in great shape- see photos, Specialty Equipment Engine Operational- see video. Pump Operational Water tank Good- no damage or holes noted, Wheels/Tires Size 205/75R15. Condition Average. Tread Depths
|
|
|
Sata Jet Air Pressure Paint Pot Sprayer Tank Painting w/ Regulators 3-5 Gallon
Used 3-5 Gallon Dan Am pressure pot for air paint spraying. includes gauges and regulators as pictured. Also has sata jet sprayer and hoses. It is used. Older but in good condition. If you have any other questions. Please email. Freight service to a commercial address with the ability to offload will be $75.
|
|
|
Graco 5 Gallon Air Pressure Paint Pot Sprayer Tank w/ Agitator Mixer Painting
Used 5 Gallon Graco pressure pot for air paint spraying. includes air operated agitator. Older but in good condition If you have any other questions. Please email. Freight service to a commercial address with the ability to offload will be $75.
|
|
|
ALLOY PRODUCTS 5 GALLON PRESSURE TANK T 304 , 155 PSI
SquareTrade © AP6.0 ALLOY PRODUCTS 5 GALLON PRESSURE TANK T 304. 155 PSI Prev Stop Play Next You are bidding on an Alloy Products Corp. High Pressure Tank. This is a very nice unit in excellent condition and it is fully guaranteed. 5 Gallon Capacity 155 PSI Max. WP 100 Degrees F Very competitive Shipping rates for our always welcomed International bidders Shipping and handling is $39.90 within the Continental USA.
|
|
|
Steel Pressure Tank 17 Gal Rated 5 NPT Ports 2"-1/4" 265 PSI @ 450F Clean 2007
NB Rated Carbon Steel Pressure Tank 17 Gallons Approx. 265 PSI@ 450F Built 2007 Dimensions 36"H overall x 12" Diameter Powder Coated Grey- some small scratches not affecting tank 5 NPT Female Ports- 3/4" top and bottom/ 2" on bottom of side/ 1/2" and 1/4" on top of side Two sturdy legs raise it 3" off floor
|
|
|
Faber steel scuba tank cylinder low pressure 85 just hydroed,viped, and o2 clean
Nice faber steel scuba tank cylinder low pressure 2400 +psi 85 made by Faber has fresh hydro. Vip,and o2 clean done 7/13. Tank is in great shape stored with air will have to empty tank when shipped.Diameter is 7" and length is about 26/ It comes with a shearwood scuba yoke valve
|
|
|
48/3000 hpa tank Steel High Pressure Air Nitro 48/3000 Psi With Filler
48/3000 psi paintball air tanks 2 ea with filler Don't know about tanks or test or fill device. All Itiems sold as is Ask if any question Thanks Posted with
|
|
|
Scott Air Pak Face mask Air Tank and Pressure Pak Used- Vintage l665 S27-1-0713
Scott Air Pak. Used- Vintage. Face Mask Air Tank and Pressure Pak with Carrying Case. Used- Vintage Comes as is. Not sure if it works. Mostly for look and collector Item. See Photos for Condition. I have great feedback so you can bid with confidence. If there is any problem at all with any item that I sell just let me know and we will fix it. I want the chance to rectify any mishaps. I strive for 100% customer satisfaction, and will work with you to resolve any issue whatsoever. Before leaving negative or neutral feedback. Or any rating less than 5 stars, contact me and let me know what I can do to make you 100% happy with your transaction. I try to charge as close to the ACTUAL shipping price as possible. I do combine shipping on MOST items and charge $1.00 for each additional item based on the highest shipping cost of the items. If there ... moreare questions just shoot me a message. Heavy items I charge actual shipping costs. And may not be able to combine shipping. Some items cannot be combined for shipping if they are heavy or awkward shaped or fragile) Shipping charges are based on shipping rates to anywhere in the USA or it's territories. And include delivery confirmation. NO Shipping outside the US without prior contact. I use the global shipping program eBay provides for most international orders. For more information on how this works I SHIP MONDAY THROUGH FRIDAY. Payments made after NOON central time on Friday will be shipped the following Monday morning. Please make payment within 3 days of auction ending. Ebay will automatically open an unpaid item case if payment is not received, so please contact me if there will be a delay in making payment. No returns on clothing or tools. All other returns are case by case basis. Check out my!Be sure to add me to your!
|
|
|
DACOR TANK PRESSURE CHECKER.....
THIS IS A DACOR TANK PRESSURE CHECKER.
|
|
|
Vintage USG Scuba Tank Pressure Gauge (3000 psi)
This is a used vintage Scuba Tank Air Pressure Gauge made by U.S. Gauge. Gauge is constructed of brass and glass. Measures air pressure from 0-3000 psi. No international shipping. Item sold as is.
|
|
|
Survivair Panther/Sigma LOW Pressure Steel Tank SCBA W/ Face Mask.
Survivair Panther/Sigma Low Pressure Steel Tank SCBA W/ Face Mask. A Complete Set: Fireman Breathing System in Very Good Used Condition. The tank is made of steel. This auction Includes tank. Mask, harness and pressure gauge. It shows some wear and minor scratches and dings. The tank was manufactured in the late 70s; it passed a hydro test at that time. The tank holds 2216 PSI. But the last time they were hydro tested was in the late 90s.They are one of the best brands available and most trusted in the industry. I’ve heard that they can be re-hydro tested like you can for any other pressurized tank. The auction pictures are similar. Not actual item, includes full MSA Ultra Elite Face Mask, 2216 PSI tank, gauge and harness. There are five at this price we like to keep our cost down and move our Inventory so everyone can enjoy them so they ... morecan be ready in a time of need. If You Are An“International Bidder" Please Check The Shipping Cost Before Bidding-Or Email Me And I Can Get The Shipping Cost For you* If you are a SCBA Broker. Deal in large orders, or just need more the one unit contact me and I can work out a break down that fits your needs* Remember Bid Responsible If You Have Any Questions Please Ask Before Bidding.
|
|
|
Crossfire 45/4500 Low Pressure Tank
Here for sale a low pressure crossfire 45/4500 tank. come with cover Posted with
|
|
|
USED HIGH PRESSURE 620 PSI VESSEL TANK APROX 3500 GALLON HEAVY DUTY -RARE-(OC89)
Up for Sale! HIGH PRESSURE VESSEL TANK APROX 3500 GALLON HEAVY DUTY-RARE- OC89) MADE BY STEEL STRUCTURES INC. YEAR BUILT 1987 SERIAL 871301-1 NET WEIGHT 35414LBS Unit can be previewed by appointment only. call for details. We can help with a freight quote. LTL, Full Trucks, Flat Bed and local delivery. All purchases less than 150 lbs will ship UPS. Fedex or USPS. CALL. TEXT OR EMAIL WITH QUESTIONS. 714)658-5390 FREE LOADING IN ALL PURCHASES SE HABLA ESPAÑOL Visit our eBay store www.orangecountymachinery.com/ ph 714 658 5390
|
|
|
Lab Commerce X21L-IPA-LAM 316L SS 1-Liter Isopropyl Alcohol Pressure Vessel Tank
Search our eBay Store! Lab Commerce X21L-IPA-LAM 316L SS 1-Liter Isopropyl Alcohol Pressure Vessel Tank SKU: JV-HAN-C-LABCOMX21LIPAL Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Lab Commerce X21L-IPA-LAM 316L SS 1-Liter Isopropyl Alcohol Pressure Vessel Tank. P/N: X21L-IPA-LAM Type: IPA Supply Vessel Size: 1 liter Material: 316L Stainless Steel Includes Gems Sensor Pilot Duty 10VA; 110-240VAC Physical Condition: Good- Minor scuffs/scratches on exterior. One of the connection ports has a bent pipe. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. Power ... moreadapter is not included. Dimensions(L" x W" x H" 6 x 4 x 8-1/8 THE FDA DISCLAIMER BELOW IS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units
|
|
|
Johnson / Evinrude dual line upright pressure gas tank
Up for sale is my upright Johnson/Evinrude dual line pressure gas tank. This tank is pretty rare since it is an upright tank with larger capacity. The motor that it went to has been scrapped. One of the previous owners had painted it blue at one time. The tank is in descent shape as you can see from the pictures. It comes with the fuel hose and the correct connector for the boat. Let me know if you have any other questions. Thanks for looking!
|
|
|
USED, DACOR Deluxe Tank Pressure Gauge, Part No. 3800-00, good condition.
This auction is for one. Used DACOR Deluxe Tank Pressure Gauge. Part number: 3800-00. This gauge is specifically for compressed air cylinders with a standard. Yoke-type valve. It will not work on DIN valves! It installs just like your regulator on the tank valve. It accurately measures tank pressure and air fills. Chrome plated brass model features shock resistant neoprene gauge cover. Large knurled relief screw is easy to turn. Yoke swivels, enabling gauge to be turned for easy reading. Body is machined from solid brass stock, forged yoke and screw. Gauge weighs 1-lb. 7oz. by itself. Dual scale p.s.i. and metric face reads to 5,000 p.s.i. Made in the U.S.A. The rubber boot is split on the back side on the bottom. Two screws are rusted on the back side of the gauge. Otherwise, this gauge is in good condition. It works perfectly and is very ... moreaccurate. Your money back if you are not satisfied. Please ask me questions. I will ship WORLDWIDE. International buyers will be responsible for any and all duties. Taxes and fees in addition to International shipping charges. PayPal only. Thank you for looking!
|
|
|
82719 Used- Pfaudler Pressure Tank System Consisting Of: (1) Pfaudler pressure t
Click To Enlarge- Used- Pfaudler Pressure Tank System Consisting Of: 1) Pfaudler pressure tank. 300 gallon, 316L stainless steel, vertical. 48" diameter x 36" straight side, dished bolt-on top, dish bottom. Internal rated 30 psi/FV at 400 deg F; 2) spray nozzles, 3" diameter shaft with a 4 blade turbine, driven by a Pfaudler model FDWV523507B drive, ratio 20:1, dual label motor 5-7.5 hp, and lubricator; 16) Branson high frequency ultrasonic cleaners with(4) model S8540EVD32 generators. Openings: top(7) 2" 2) 8" 3" 2) 4" side 2" 4" center bottom outlet. 4 side lugs. 1) Moyno 7.5 hp pump, model A2ESSB-X-3DPA; 2) Micro Motion flow meters; 2) Reliance SP500 VS drive panels, misc piping and valves. Unit frame mounted. Built 2002. ref# 82719 Contact Information Steven Cohen Aaron Equipment Company 735 ... moreE. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
SPRAYMATION THERMOPULSE LOW PRESSURE LIQUID ASME TANK - APPROX. 3 GALLAONS
Spraymation Inc. Thermopulse ASME Certified Low Pressure Stainless Steel Tank- 3 Gallons approx. Tank has no dents or damage to the outside surface or the inside. Clean both inside and outside. The tank is equipped with a heating element but it has not been tested. Maximum pressure is rated at 130 psi. Can be used for a number of fluids. Such as adhesives, bugs spray, fertizers and most any liquids, but you must consult with the manufacturer to determine exactly what can be used in the tank. A new tank sells for between $800 to $1,000 each.
|
|
|
AIR TANK SWITCH/PRESSURE SWITCH/250 PSI GAGE/POP OFF AND ADAPTORS
TRIED TO TAKE A CLOSE UP OF THE BOLT THAT ADJUSTS THE PRESSURE ON THE SWITCH AS IT IS MARKED WITH A + AND A- but I did not take much of a picture.Here is a very good ADJUSTABLE AIR TANK PRESSURE SWITCH no gage and no pop off valve.This pressure switch was on a tank that I was useing so I know it is good as it was just fine when I changed air tanks and I sold my tanks and I have another switch on ebay that is in great condition that I was useing on another tank.This weighs 10 ounces and will weigh over 1 pound after careful packing and the P.O charges to the next highest pound so shipping is on 2 pounds.Thanks
|
|
|
Hot water heater commercial 365,000btuh input 69 gallons high pressure tank
This is a used commercial hot water heater. It has not been fired in 15 years. It is in excellent shape. It has been drained sitting around waiting for me to feel like listing it. I own a commercial building and we did away with the kitchen and have no need for the unit. These things go for at least $5.000 new. Because it's a high pressure rated tank, 320 psig, it can be used in a large variety of applications. You must pick this up. I will not arrange shipping. You are welcome to come see it. Installation services are available in greater Cleveland area. You can also call me to see it. John at 216 213 6201 or if you have more questions. There is no warranty. Unit is" as is" relief valve on it is 150 psig. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-140243a3c62-0x101-
|
|
|
Empire Aluminum 47ci 3000psi Compressed Air Tank Paintball High Pressure N2/HPA
USED EMPIRE NITROGEN/COMPRESSED AIR HPA TANK 48-47/3000 TANK NO NEED FOR HYDRO TESTING UNTIL 2016 Features: 800 psi output pressure Expect up to 700+ shots Aluminum tank with DOT and TC Stamp 5 year hydro date, Has some wear and tear but works good.
|
|
|
DEVILBISS QMS-515 PRESSURE TANK PAINT POT GAST MIXER USED
Sale is for One(1) USED DEVILBISS QMS-515 PRESSURE TANK WITH GAST MIXER This has some very light scratches and corrosion on the mixing shaft shown in photos The tank in the photos is the one you will receive Link to Manufacturer pdf resources- Specs; Manufacturer- Devilbiss Model- QMS-515 Material- Stainless Steel Capacity- 15 Gallon Motor- Gast 2AM Weight- 97 lb Location- Floor Display Thanks Kurt
|
|
|
NINJA PRO SLP 50 4500 LOW PRESSURE N2 COMPRESSED AIR TANK ★ MANUFACTURED 04/12
Up for auction is a slightly used Ninja 50/4500 compressed air tank with a Ninja Pro SLP Regulator. Manufactured 04/12 and good until 2017! Always in a protective case. Threads protected, nipple protected. Comes with regulator owners manual. No problems. Works great! I ship within 24 hours. And use protective packaging so you always get your item quickly, and in excellent condition, my feedback speaks for itself. If you have any questions. Please let me know. Thank you for looking. And If you are interested in other paintball items, please check out my other auction.
|
|
|
Lab Commerce INB1-R903 316L SS 1-Liter Isopropyl Alcohol Pressure Vessel Tank
Search our eBay Store! Lab Commerce INB1-R903 316L SS 1-Liter Isopropyl Alcohol Pressure Vessel Tank SKU: JV-HAN-C-INB1R903 Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Lab Commerce INB1-R903 316L SS 1-Liter Isopropyl Alcohol Pressure Vessel Tank. Model: 790-008289-002. P/N: INB1-R903. Type: IPA Supply Vessel Size: 1 liter Material: 316L Stainless Steel Includes Gems Sensor Pilot Duty 10VA; 110-240VAC Physical Condition: Good- Minor scuffs/scratches on exterior. Some residue buildup on exterior. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. Power ... moreadapter is not included. Dimensions(L" x W" x H" 6 x 4 x 8-3/4 THE FDA DISCLAIMER BELOW IS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units l
|
|
|
U.S. DIVERS SCUBA DIVING TANK / AIR PRESSURE TANK MADE IN THE USA
UP FOR BID A U.S. DIVERS SCUBA DIVING TANK/ AIR PRESSURE TANK MADE IN THE USA. CO MES AS SEEN PLEASE CHECK AT ALL THE PICTURES BECAUSE IT WILL COMES WITH EVERYTHING SHOWN IN. Please examine photos carefully for more information and do not hesitate to contact me with any questions that you may have regarding this item Thank you. I AM SORRY BUT I DO NOT SHIP TO HAWAII. ALASKA, PUERTO RICO. I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. THANK YOU AND HAVE GREAT DAY.
|
|
|
SCUBA TANK 100CF HIGH PRESSURE HP STEEL 3500 PSI DIN VALVE NO RESERVE
THIS IS FOR A HIGH PRESSURE. 3500 PSI, STEEL SCUBA TANK. NEEDS HYDRO. I BELIEVE THIS IS A 100CF TANK. IT IS APPROX 25 INCHES TALL FROM THE FLOOR TO THE TOP OF THE NECK, NOT THE TOP OF THE VALVE, AND 7.3 INCHES IN DIAMETER. IT HAS A SHERWOOD 6300 DIN VALVE WITH A THREAD PROTECTOR. IT ALSO HAS A BLACK RUBBER BOOT. THE NECK READS AS FOLLOWS: DOT-E9791-3500 TR5250 2-99 8/06 IA 6785005. THIS TANK HAS ALWAYS BEEN STORED WITH AIR IN IT. THIS IS A NO RESERVE AUCTION. HIGH BIDDER WINS! BUYER PAYS ACTUAL SHIPPING AS I DON'T CHARGE ANY HANDLING FEES.
|
|
|
50 Survivair LOW Pressure Breathing Apparatus,Face Mask & Steel Tank's .
Survivair Sigma Low Pressure SCBA Breathing Apparatus Steel. Used In Good Working Condition* Survivair Sigma Low Pressure 2215 PSI Firefighter breathing apparatus system Back Packs. Back Packs. Pressure gauge and face mask. They are In very good used condition. Pictures are similar. Not actual item. Includes full Back Packs, pressure gauge, Harness and face mask is used and discolored. Will show some wear but otherwise still in good working Condition" This Auction Is For 50 Survivair Sigma Low Pressure Scba Steel Tank's" We Like To Keep Our Cost Down And Move Our Inventory So Everyone Can used them in time of need. If you want more the ONE Survivair Sigma Low Prussure SCBA let me know how many and where they are going to be shipped to. So I can get the Shipping. Packaging or Crate Cost Back to you. allow 5 to 7 day's for ... moreshipping. Remember To Bid Responsibly” If you are a SCBA Broker. Deal in large orders, or just need more the one unit contact me by emaill or call me at 1(805) 296-9222 or you can send me a TEXT Message and I can work out a break down that fits your needs* If You Are An" International Bidder" Please Check The Shipping Cost Before Bidding-Or Email Me And I Can Get The Shipping Cost For You. If You Have Any Questions Please Ask Before Bidding. Posted with Posted with
|
|
|
Vintage Stove Fuel Pressure Copper Tank
Vintage Copper Fuel Pressure Tank. Fuel Fill Cap and Pressure Pump in Good Condition Tank in Good Condition. About 10" by 3" Please Check Out My Other Items! Please Contact Me first if there are any problems with your purchase.
|
|
|
Clean MARES Tank Pressure Gauge W/ LCD Depth and Dive Time Computer
Ok. Please make note that I am NOT a scuba diver, nor do I know how to check out this gear. I am selling it in untested, and in unknown working condition. You will get a very clean looking MARES tank pressure gauge, with a MARES LCD depth gauge that gives dive time, max depth, and temp.needs some sort of battery that I do not have, so, in untested and unknown working shape.
|
|
|
Ninja 68/4500 Carbon Fiber Super Low Pressure HPA tank (#2)
This auction is for 1 of 2 made in the USA Ninja 68/4500 carbon fiber tanks(hydro good til 2017) I have for sale. This tank has a 250psi output which when used with a Polarstar system does away with the need for a second regulator in the Polarstar air rig. Tank is is in very good to excellent condition and was just returned from Ninja with their new more durable carbon fiber resin coating. Item will ship only within the United States. All items sold as-is. Buyer is responsible for all shipping and insurance charges. Any shipping overage will be refunded via PayPal after the item ships. Buyer is required to pay for item within 3 days of auction close unless other arrangements are made prior to auction close. Thanks for looking and check out my other auctions for a Polarstar PR-15. Polarstar custom air rig, Ninja 68/4500 HPA tank#1 and a Madbull ... moreinner/outer tightbore barrel set!
|
|
|
Vintage 1990s Larami Air Pressure Super Soaker 50 Extra Tank Water Carrier
Super Soaker 50 Extra Tank Carrier Vintage Super Soaker Larami Product*All of my items come from a smoke and pet free home* PAYMENT DETAILS- Payment must be made within 3 days. An invoice will then be re-sent. If no payment is made. An unpaid item claim will be opened. If there's any problems with your payment, contact me as soon as possible and we'll work it out. SHIPPING- Electronic Tracking will be updated once a label is generated. I attempt to ship items as quickly as possible(within 2 business days of payment) I do not ship on Saturdays. INTERNATIONAL SHIPPING- I only use the Global Shipping Program to ship items internationally. Buyer will be responsible for all custom fees. PACKAGING- I use recycled materials to wrap my packages. This includes plastic bags. Newspapers, circulars, brown bags, food boxes, etc. I will not be ... moreusing any dirty or unsanitary items(those are discarded) When needed, extra protection(such as bubble wrap, peanuts, etc. will be used. RETURNS- I have a limited return policy. You must contact me within 1 week of receiving the item if there's any problems with your order. Otherwise I will not entertain the idea of a return at all. If you are unhappy with your purchase, you must return the item within 1 4 calendar days of the completion of the sale and only after contacting me first. Brand New. Sealed items will not be accepted if it has been opened. CDs cannot be returned for any reason(this includes brand new and used discs) Any other problems, contact me as soon as possible. SALES TAX- Due to laws. Items sold in NEW JERSEY will be charged a 7% sales tax. LASTLY- All of my items are being sold AS IS according to the photographs and description. I will describe items to the best of my ability and provide clear and exact descriptions and photos as best as possible. I cannot test every DVD. CD, Video Game due to time constraints. If there's any problems with skipping or freezing, return the item to me and I will attempt to repair it(I have a disc repair machine) and th
|
|
|
Vintage 1991 Air Pressure Super Soaker X.T.C. XTC Extra Tank Water Carrier
Super Soaker XTC Extra Tank Carrier Vintage Super Soaker Larami Product I have a total of 3 of these tanks. This auction is for ONE. If you'd like additional tanks. Please message after the auction is over so I can add it to total. All of my items come from a smoke and pet free home* PAYMENT DETAILS- Payment must be made within 3 days. An invoice will then be re-sent. If no payment is made. An unpaid item claim will be opened. If there's any problems with your payment, contact me as soon as possible and we'll work it out. SHIPPING- Electronic Tracking will be updated once a label is generated. I attempt to ship items as quickly as possible(within 2 business days of payment) I do not ship on Saturdays. INTERNATIONAL SHIPPING- I only use the Global Shipping Program to ship items internationally. Buyer will be responsible for all ... morecustom fees. PACKAGING- I use recycled materials to wrap my packages. This includes plastic bags. Newspapers, circulars, brown bags, food boxes, etc. I will not be using any dirty or unsanitary items(those are discarded) When needed, extra protection(such as bubble wrap, peanuts, etc. will be used. RETURNS- I have a limited return policy. You must contact me within 1 week of receiving the item if there's any problems with your order. Otherwise I will not entertain the idea of a return at all. If you are unhappy with your purchase, you must return the item within 1 4 calendar days of the completion of the sale and only after contacting me first. Brand New. Sealed items will not be accepted if it has been opened. CDs cannot be returned for any reason(this includes brand new and used discs) Any other problems, contact me as soon as possible. SALES TAX- Due to laws. Items sold in NEW JERSEY will be charged a 7% sales tax. LASTLY- All of my items are being sold AS IS according to the photographs and description. I will describe items to the best of my ability and provide clear and exact descriptions and photos as best as possible. I cannot test every DVD. CD, Video Game due to
|
|
|
pressure tank Romate 80 pentek osmosis system 86.7 gal. 1.25'"water line
Fiberglass.
|
|
|
Paint Pressure Tank 2.5 Gallon with GAST Lubricated Air Motor
Paint Pressure Tank 2.5 Gallon with GAST Lubricated Air Motor Description Paint Pressure Tank 2.5 Gallon with GAST Lubricated Air Motor MAX air pressure: 60 PSI GAST 2AM-NCC-16 Lubricated Air Motor Includes mixing attachment Manufacturer Paint Manufacturer Part Number Pressure Item/Ship Weight 29 LBS Tech Condition This item is used and has been tested to be in good working condition. This product can be previewed at our facility in Ventura. Ca. during normal business hours 8am to 5pm M-F. If you have any questions or specific testing you would like done please email or call us before bidding. Please call us if you have any questions at(805) 648-3300 Photos in this listing may not show the exact item we will ship(ie. extended part numbers or revision numbers may not match) An accessory or part not shown in the photos or description is probably ... morenot included. If you have any questions please contact us before bidding. Shipping We will professionally package. Using instapak foam-in-place if needed, and insure this product for safe delivery. Domestic shipping rates are available using the shipping calculator below, subject to terms& conditions. Please contact us for international shipping rates. Local pickup is encouraged for which all shipping and handling fees will be waived PID 46563 ABOUT SHIPPING TO DOMESTIC OUTLYING AREAS Please note that although the shipping calculator should not offer rates to Alaska. Hawaii, Puerto Rico, etc. we can ship there. Please contact us for a quote. These locations do not qualify for FREE SHIPPING offers, so we've had to exclude them from all shipping to prevent erroneous listings. ABOUT USPS SHIPPING Please note that we have discovered a problem with the eBay Shipping calculator on items that are too large for USPS shipping guidelines. The calculator is still showing USPS options even though the package is too large to qualify. As such. We may need to contact you before shipping to make an adjustment to a different method which may change the price for shipping as well. Th
|
|
|
Smar LD301 Tank level Pressure Transmitters with LCD readout
Smar LD301 Tank Level Pressure Transmitter. Used. LCD readout, Range: 8.33 to 1000 inches water, Pressure rating: 2300 psi, Material: 316SS. We have 6 of these available- priced each. Our item# S4203. S4204, S4305, S4306, S4307, S4309 Terms: All equipment is sold in its current state as is. Where is. It is the buyers responsibility to assess condition and suitability.
|
|
|
ARISTON SURVEYOR Tank pressure monitoring system
T HIS BID IS FOR ONE UNIT ARISTON SURVEYOR TANK PRESSURE MONITORING SYSTEM DISPLAY DESCRIPTION: Used. Physically good. Tested OK. SHIPPING: Worldwide air freight shipping requires 10- 15 days at best. GUARANTEE: If found DOA. Return accepted with full money back. OTHER: Please contact us for any queries. Visit our ebay ====================================================================================================== S About us: We specially deal in Power Generating items like Steam Turbine Generator. Diesel Generators, and Micro Gas turbines and control Equipments(electro pneumatic) and automation spares collected from Ship Breaking Yard and others. We are committed to providing our customers with tested/ quality items from our wide selection/ collected stores at a lowest possible price. We have the opportunity to explore for your requirements ... moreat your need. Sale procedures& terms details: Item included in the list is as shown in the photo and Specification is listed. If picture is not included it will mean the item is new or not used. When the representative picture is used it will have to be assumed that the actual item may differ in size. If the item is tested and found working. It will be written Tested O.K. in the list otherwise its functionality will be clearly expressed in the detail description list. Most items that we offer are guaranteed for thirty(30) days after receipt unless specified in the listing. Buyer will be notified of final shipping fees/costs or measure via an eBay invoice after the listing ends; 2-5 days is assumed to reach the item to dispatch centers/ shipping agents. Any bid or buy-it-now is a legal binding contract- Bid only if you're serious about to buy the item; if we(Advertiser) are unable to establish contact with the winning bidder within 7 days of the end of the auction or if payment is not received within 14 days, item may be offered re-listed and any claim after the stipulated time may or may not be accepted and the e-bay rule will predominate. Payment: Payments are
|
|
|
ESAB PREST-O-LITE R-411B PRESSURE REGULATOR FOR B ACETYLENE TANK (04X36)
YOU ARE BIDDING ON A PREST-O-LITE R-411B PRESSURE REGULATOR FOR B ACETYLENE TANK. MANUFACTURER IS ESAB PART# 04X36. MAX PRESSURE IS PSIG 15 OUTLET CONNECTION IS"A" SIZE. THANK YOU FOR YOUR CONSIDERATION AND HAPPY BIDDING!
|
|
|
Ninja 50CI 4500PSI High Pressure Air N2 Nitrogen Paintball Tank Grey Ghost
Hydro date 3/12 so it's good till 3/17 No leaks but h as cracks in gel coating
|
|
|
MINI SCUBA TANK PRESSURE GAUGE - ATTACHES TO FIRST STAGE - PONY BOTTLES
SCUBA PRESSURE GAUGE SPG FOR FIRST STAGE PONY BOTTLE USED. BUT WORKS GREAT!
|
|
|
MiT-M Hot Water Pressure Washer with Tank
FOR SALE: This unit was used for flushing tubes in a production process 220/440 vac plc light curtians 80/20 CONTACT US FOR SHIPPING DETAILS
|
|
|
85464 Used- Alloy Products Pressure Tank, 5 Gallon, 304 Stainless Steel, Vertica
Click To Enlarge- Used- Alloy Products Pressure Tank. 5 Gallon, 304 Stainless Steel, Vertical. 9" diameter x 18" straight side. Dished top and bottom. Internal rated 175 PSI at 100 Degrees F. Openings: top(4) 3/4" NPT, 3" x 4" oval with cover. Skirt mounted. ref# 85464 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment ... morelocation and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
|
|
|
600-800 gallon Galzanized Pressure Tank
After purchase. You must come to pick it up within 5 days and i will put the tank in your vehicle(only FlatBed Vehicles or Trailers can hold this tank) for you. This cannot be shipped, only personal meets. You may also come look at the tank before purchasing. CASH ONLY if you come to see it personally and are interested. Posted with
|
|
|
Binks 10 Gallon Pressure Pot Paint Galvanized Gun Sprayer Tank
very clean and looking as new. We did not test this item and therefore we guarantee this sale for 30 days with shipping back return if something is wrong with this item. You will receive the items shown in pictures. COMBINE SHIPPING. If you want to buy more of our store items please do so and request an invoice before paying as we combine shipping. QUALITY GUARANTEE: We inspect and test all items that come into our shop. However. We deal with a large variety of items and our knowledge of some items is quite limited. Because of this we offer a 48 hour inspection period on all items that we sell. If you happen to find a problem with your item that we missed, please let us know within 48 hours of delivery. We will repair the item or refund your money if there is a problem that we cannot fix. Good customer service is our only goal. Please let ... moreus know immediately if there is a problem with your item. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. Please note that we are not related with any of the companies that manufacture the products that we sale therefore if you have any questions regarding our products you can contact us directly. Mycyberoffice.com eBay Store Visit My eBay Store: MyCyberOffice The place for all your tools. Military surplus and much more needs Visit my eBay Store: MyCyberOffice On Aug-11-13 at 01:19:10 PDT. Seller added the following information:
|
|
|
SCOTT AIR-PAK SCBA 2216 W/ MASK, FRAME,HARNESS, TANK, REGULATOR PRESSURE PAK II
came from local municipality upgrade shipping is $40
|
|
|
44726007 Used- Harris Pressure Tank, 13,000 Gallon, 316L stainless steel, horizo
Click To Enlarge- Used- Harris Pressure Tank. 13,000 Gallon, 316L stainless steel, horizontal. 120” Diameter x 242” straight side, dished heads. Internal rated 50 psi at-20 to 250 degrees F. Top entering agitator, no tag. Approximately 2” diameter shaft with a(4) blade turbine, driven by a 5 hp, 3/60/220/440 volt, 1740 rpm XP motor. Openings: top 1” 1-1/2” 3” 4” 6” 1) head 8” 17” manway with cover; 3” end bottom outlet. Mounted on(2) carbon steel saddles. National Board#274, serial#1278. ref# 44726007 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions ... moreAll items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-140732f0a88-0x104-
|
|
|
Feldmeier Tank 200 Gal Capacity Stainless Steel Pressure Vessel Strainer
Ebay Item Title Tracking No: 16136 Condition: USED Location: Warehouse Exterior Description The item was pulled from a working site and is ready for shipping. Please observe the pictures as a reference to the condition of this unit. Payment Methods We only accept Pay pal. Visa, Master Card and in some cases Certified Checks. Shipping Item will be sold with“Free Local Pick Up Offered” Option Standard. Please contact us prior to purchase If Shipping is required and we will include it on your invoice. Return Policy We offer a 14 day warranty for DOA(Defective On Arrival) Items. Buyer Pays For Return Shipping.
|
|
|
SPARTANBURG CHALLENGER 6 STAINLESS 3 GALLON PRESSURE TANK 130 PSI
Authentic Spartanburg. Excellent condition. Seal in good shape. Posted with
|
|
|
Wessels Co. 20 Gallon Air Pressure Vessel tank 200psi 14 x 34" Steel Auxilary
Wessels Co. 20 Gallon Air Pressure Vessel tank 200psi 14 x 34" Steel Auxilary SPECIFICATION Bullseye Catalog# 34291 This is used tank made by Wessels Company of Detroit in 1994. Tank is in good condition. Tank has 11 NPT ports ranging from 1/2 to 2" NPT. This is an Industrial duty tank that was used on a CNC Lathe. Weight: 75 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any ... moreway please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us a
|
|
|
BINKS 2001 Spray Gun w/Cup, Pressure Tank & Hoses
Nice spray gun package. Used for one job. And stored since. Included: Gun. 6' hoses, Cup Tank, 2 Quart Pressure Tank, Instructions After use we detail disassembled and flushed all components. The spray head was put in a solution and kept in the tank. A certain amount of corrosion occurred. But nothing that would hinder the performance. The Air Nozzle is Binks 66SD The Fluid Nozzle is Binks 66SS This is a medium flow sprayer for Lacquers. Synthetic Enamels, Shellacs& Urethanes. Requires 12 CFM@ 50# Original Instruction Booklet Included Good Luck Bidding!
|
|
|
Pressure Chamber Resin Casting - Good starter 2L Pot Tank USED
For auction is one used 2L pressure chamber. Converted for resin casting. Seal is good and tank is in good condition apart from some surface wear and resin stains! Dimensions. Tank outer diameter 12.5cm height 20cm- Opening diameter 8.5cm. 2 1/4inch BSP fittings and one 3/8 inch BSP fitting. Buyer will need to fit and seal two of these outlets with valves and connect a compressor to the remaining one. Great cheap introductory chamber to resin casting for casting small objects. Fills quickly to desired pressure so suitable for fast curing resins. Thanks for looking. Check out my other items! I do combine shipping costs for multiple wins. Payment: Payment is preferred by paypal. If paying by personal cheque; the item will be dispatched promptly after the cheque has cleared. This item will be well packed to ensure safe transit. All payments ... moreare to be made in GB pounds. Feel Free to email me with any questions regarding this item.
|
|
 |