In 
 
Order by: 
Available to: 
Price: 
 - 
$
12,000
Buy It Now
$0 Shipping
Condition: Used
Location: Campbell,OH,USA
$
6,850
Buy It Now
$0 Shipping
Condition: Used
Location: Dalton,OH,USA
2" STANDARD PLASTIC EXTRUDER BY STERLING/DAVIS 20 HP VARIABLE SPEED U SVD BARREL: ELECTRICALLY HEATED. AMBIENT COOLING, VENTED, 24:1 LD RATIO REDUCER: ... more11:1 LIQUID COOLED FEED THROAT CONTROL PANEL: ANALOG TEMPERATURE CONTROLLERS. 4 BARREL. 2 ACCESSORY ZONES EIGHT HOLE STRAND DIE MOUNTED AND WIRED 2" SCREEN CHANGER MOUNTED AND WIRED WITH HYDRAULIC UNIT SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
$
10,000
Buy It Now
Free Shipping
Condition: Used
Location: Campbell,OH,USA
$
5,140.59
Buy It Now
$0 Shipping
Condition: Used
Location: Oxnard,CA,USA
$
7,000
Buy It Now
Free Shipping
Condition: Used
Location: Hainesport,NJ,USA
This machine is guaranteed to be in working condition when you receive it. Comes with lots of tooling up to approx. 9/16" as shown. It wad built ... more70's but it's been updated with an encoder for measuring and tachometer feedback for precise speed. I need to sell it so make an offer! I don't know what it's worth and I had to start somewhwere. Call with any questions at 8three2-7five2-O776 Merry bidding and Happy 2014 Ebaying from 2009industrialelectronics!
$
175
Buy It Now
$25 Shipping
Condition: New
Location: China
$
12,000
Buy It Now
Free Shipping
Condition: Used
Location: Eugene,OR,USA
$
15,000
Buy It Now
$0 Shipping
Condition: Used
Location: Rancho Cucamonga,CA,USA
$
99,300
Buy It Now
$0 Shipping
Condition: Used
Location: Miami,FL,USA
$
14,000
Buy It Now
Free Shipping
Condition: Used
Location: West Palm Beach,FL,USA
$
40,000
Buy It Now
Free Shipping
Condition: Used
Location: Palm Beach Gardens,FL,USA
$
700
Buy It Now
$0 Shipping
Condition: Used
Location: Norwood,NJ,USA
$
1,500
Buy It Now
$0 Shipping
Condition: Used
Location: Macomb,MI,USA
$
5,000
Buy It Now
Free Shipping
Condition: Used
Location: Hainesport,NJ,USA
$
1,250
Buy It Now
Free Shipping
Condition: Used
Location: Gardner,MA,USA
We can provide new strand dies for single and twin screw extruders at VERY competitive prices. Email for a quote. ITEM NUMBER: 6744 DIES STRAND& STRIP: ... moreStrand Die- 4 Hole 4 hole strand die with heater and adapter. Manufacturer unknown. I describe everything to the best of my ability. BUT if you have any questions at all please remember to ask them before you bid. You may email or call 978-669-0060. All items are sold as is and shipping is at the buyers cost, unless otherwise noted. Returns gladly accepted, within 3 days, if I have misrepresented the item. Payment due within 7 days of auctions end. Personal Checks. Money Orders or Cash, Credit Cards or Paypal only, unless previous arrangements are made. I can take most major credit cards directly. Personal Checks held 10 days. UPS is our preferred shipping method. We charge ssomewhere around actual cost unless the items need to be crated or there are unusual shipping requirements. We deal in all sorts of plastic machinery. Twin and single screw extruders we have both new and used parts. Please contact us if you are looking to buy or sell. Please take a look at our other plastic related equipment auctions. Will take your surplus equipment in trade. Let us know what you have available! If you would like to talk to me on the machine. Call Dave at 978-669-0060. We will load at no charge, it will ship from Gardner. MA. Machine is sold as is with no warranties expressed or implied. Freight is the responsibility of the buyer. We will help with getting a trucking company if needed. Thanks for looking! Thanks for looking! Insurance is your choice. But we do recommend it, as you are responsible for the item once it leaves our hands. If the item is too large to ship UPS, we can ship by truck or van line or whatever arrangement you may prefer. We can help you obtain a truck if needed Thanks for bidding and have a great day! Please see our other auctions. No I won’t take your 3 rd party bogus bank check and wire you the excess funds immediately!
$
5,999.99
Buy It Now
$875 Shipping
Condition: Used
Location: Milton Freewater,OR,USA
$
4,200
Buy It Now
Free Shipping
Condition: Used
Location: Hainesport,NJ,USA
$
3,450
Buy It Now
$0 Shipping
Condition: Used
Location: Gardner,MA,USA
$
10,000
Buy It Now
Free Shipping
Condition: Used
Location: Hainesport,NJ,USA
$
9,950
Buy It Now
Free Shipping
Condition: Used
Location: Gardner,MA,USA
ITEM NUMBER: 5862 PELLETIZERS STRAND 06" Cumberland 6" 24K Helical Quietizer Pelletizer MODEL NUMBER: 6 Quietizer Cumberland 6" Quietizer. ... more24 knife helical stellite rotor, 5 HP? US Varidrive. Pneumatically actuated upper feed rolls I describe everything to the best of my ability. BUT if you have any questions at all please remember to ask them before you bid. You may email or call 978-669-0060. All items are sold as is and shipping is at the buyers cost, unless otherwise noted. Returns gladly accepted, within 3 days, if I have misrepresented the item. Payment due within 3 days of auctions end. Personal Checks, Money Orders or Cash, Credit Cards or Paypal only, unless previous arrangements are made. I can take most major credit cards directly. Personal Checks held 10 days. UPS is our preferred shipping method. We charge ssomewhere around actual cost unless the items need to be crated or there are unusual shipping requirements. We deal in all sorts of plastic machinery. Twin and single screw extruders we have both new and used parts. Please contact us if you are looking to buy or sell. Please take a look at our other plastic related equipment auctions. Will take your surplus equipment in trade. Let us know what you have available! If you would like to talk to me on the machine. Call Dave at 978-669-0060. We will load at no charge, it will ship from Gardner, MA. Machine is sold as is with no warranties expressed or implied. Freight is the responsibility of the buyer, we will help with getting a trucking company if needed. Thanks for looking! Thanks for looking! Insurance is your choice. But we do recommend it, as you are responsible for the item once it leaves our hands. If the item is too large to ship UPS, we can ship by truck or van line or whatever arrangement you may prefer. We can help you obtain a truck if needed Thanks for bidding and have a great day! Please see our other auctions. No I won’t take your 3rd party bogus bank check and wire you the excess funds immediately!
$
728
Buy It Now
$240 Shipping
Condition: New
Location: China
$
15,995
Buy It Now
Free Shipping
Condition: Used
Location: West Palm Beach,FL,USA
$
19,995
Buy It Now
Free Shipping
Condition: Used
Location: Gardner,MA,USA
$
4,500
Buy It Now
Free Shipping
Condition: Used
Location: Hainesport,NJ,USA
$
12,950
Buy It Now
Free Shipping
Condition: Used
Location: Gardner,MA,USA
$
39,500
Buy It Now
Free Shipping
Condition: Used
Location: Phoenix,AZ,USA
$
39,500
Buy It Now
Free Shipping
Condition: Used
Location: Sterling,MA,USA
Great running 6" NRM Extruder 24:1 vented barrel. Barrel was New in 2013. New HIPS Screw in 2013 and New ABS Screw in 2014. 300HP DC Motor rewound ... morein 2013. Motor drive was also replaced New at the same time. 52" quick adjust Cloren Sheet die new in 2006 with 2 lower lips. 1 Range.001"0.500" and#2 range 0.500"0.875" 59" wide Prodex Down stream with Smooth Rollers and a Haircell roller. We have a spare Smooth top and middle roller. 6" Berlyn Screen Changer. 54" Famco shear and 3 Sterlco temperature control units. The shear has a digital controller for shearing to length new in 2014. Also we have a controller for the feed augers. Augers and Controller new in 2014. Currently under power and running. Any questions call Justin 843-680-0300. Video of machine running Sold As Is with all Faults All sales are final with no returns. Price includes loading on to your truck.
$
23,500
Buy It Now
Free Shipping
Condition: Used
Location: Scottsdale,AZ,USA
$
32,887
Buy It Now
Free Shipping
Condition: Used
Location: Millwood,WV,USA
$
12,000
Buy It Now
Free Shipping
Condition: Used
Location: Eugene,OR,USA
$
4,200
Buy It Now
Free Shipping
Condition: Used
Location: Hainesport,NJ,USA
$
24,500
Buy It Now
Free Shipping
Condition: Used
Location: Utica,MI,USA
$
5,250
Buy It Now
Free Shipping
Condition: Used
Location: Hainesport,NJ,USA
$
11,950
Buy It Now
Free Shipping
Condition: Used
Location: Gardner,MA,USA
ITEM NUMBER: 6807 PELLETIZERS STRAND 06" Conair 206 32 Knife Helical Pelletizer MODEL NUMBER: 206 Conair Model 206 strand pelletizer. 32 knife helical ... morerotor. Rubber coated upper feed roll knurled stainless lower feed roll I describe everything to the best of my ability. BUT if you have any questions at all please remember to ask them before you bid. You may email or call 978-669-0060. All items are sold as is and shipping is at the buyers cost, unless otherwise noted. Returns gladly accepted, within 3 days, if I have misrepresented the item. Payment due within 3 days of auctions end. Personal Checks, Money Orders or Cash, Credit Cards or Paypal only, unless previous arrangements are made. I can take most major credit cards directly. Personal Checks held 10 days. UPS is our preferred shipping method. We charge ssomewhere around actual cost unless the items need to be crated or there are unusual shipping requirements. We deal in all sorts of plastic machinery. Twin and single screw extruders we have both new and used parts. Please contact us if you are looking to buy or sell. Please take a look at our other plastic related equipment auctions. Will take your surplus equipment in trade. Let us know what you have available! If you would like to talk to me on the machine. Call Dave at 978-669-0060. We will load at no charge, it will ship from Gardner, MA. Machine is sold as is with no warranties expressed or implied. Freight is the responsibility of the buyer, we will help with getting a trucking company if needed. Thanks for looking! Thanks for looking! Insurance is your choice. But we do recommend it, as you are responsible for the item once it leaves our hands. If the item is too large to ship UPS, we can ship by truck or van line or whatever arrangement you may prefer. We can help you obtain a truck if needed Thanks for bidding and have a great day! Please see our other auctions. No I won’t take your 3rd party bogus bank check and wire you the excess funds immediately! 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7
$
1,495
Buy It Now
Free Shipping
Condition: Used
Location: Gardner,MA,USA
ITEM NUMBER: 5277 PELLETIZER PARTS CUMBERLAND USED: Cumberland 6" Bolt on Rotors 8. 12& 16 knife Used Cumberland pelletizer rotors. Fits 6" ... morestandard. And quietizer pelletizer. Price is for one rotor. We carry a full line of replacement parts for Cumberland. Conair, and other pelletizers. We deal in all sorts of plastic machinery. Please contact us if you are looking to buy or sell. Please take a look at our other plastic related equipment listings. Will take your surplus equipment in trade. Let us know what you have available! If you would like to talk to me on the machine. Call Dave at 978-669-0060. We will load at no charge, it will ship from Gardner. MA. Machine is sold as is with no warranties expressed or implied. Freight is the responsibility of the buyer. We will help with getting a trucking company if needed. Most any type of collected funds payment is accepted. Thanks for looking& don’t forget to check out our other auctions! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1456cbf530d-0x112-
$
7,750
Buy It Now
Free Shipping
Condition: Used
Location: Hainesport,NJ,USA
$
65,000
Buy It Now
Free Shipping
Condition: Used
Location: Scottsdale,AZ,USA
$
30,000
Buy It Now
Free Shipping
Condition: Used
Location: Hainesport,NJ,USA
$
1,995
Buy It Now
Free Shipping
Condition: Used
Location: Gardner,MA,USA
$
29,500
Buy It Now
Free Shipping
Condition: Used
Location: Harbor City,CA,USA
$
5,900
Buy It Now
Free Shipping
Condition: Used
Location: Carlsbad,CA,USA
$
37,500
Buy It Now
Free Shipping
Condition: Used
Location: USA
$
47,500
Buy It Now
Free Shipping
Condition: Used
Location: USA
$
3,995
Buy It Now
Free Shipping
Condition: New
Location: Gardner,MA,USA
$
29,500
Buy It Now
Free Shipping
Condition: Used
Location: Holland,OH,USA
$
2,370
Buy It Now
Free Shipping
Condition: Used
Location: Riverside,RI,USA
$
19,500
Buy It Now
Free Shipping
Condition: Used
Location: Orange,CA,USA
$
41,500
Buy It Now
Free Shipping
Condition: Used
Location: USA
$
9,500
Buy It Now
Free Shipping
Condition: Used
Location: Fountain Valley,CA,USA
$
5.75
Buy It Now
Free Shipping
Condition: New
Location: United Kingdom
$
58,900
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: West Palm Beach,FL,USA
$
45,885
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: West Palm Beach,FL,USA
$
58,000
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: West Palm Beach,FL,USA
$
28,500
Buy It Now
Free Shipping
Condition: New
Location: West Palm Beach,FL,USA
$
27.19
Buy It Now
$0 Shipping
Condition: New
Location: Independence,OH,USA
$
52,885
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: West Palm Beach,FL,USA
$
28,495
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: West Palm Beach,FL,USA
$
21.34
Buy It Now
$14.48 Shipping
Condition: New
Location: United Kingdom
$
56,920
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: West Palm Beach,FL,USA
$
38,900
Buy It Now
Free Shipping
Condition: New
Location: West Palm Beach,FL,USA
1 2 3 4 5 6 7 8 9 10
 In 

Past Items  
 
1) Industrial extruder. Taken off an extrusion line with 5 other extruders, entire line was capable of producing around one million pounds of nylon fiber per week. Extruder purged with polypropylene. Has no motor, die, or control system. Perfect for someone setting up a custom application. Unit weighs 1940lbs. Heavy duty, well made unit, designed for continuous use. Posted with
USED WECHSEL POLYMER EXTRUDER PART NO. 496-945. TYPE 012FG-B50 WITH A BALDOR MOTOR, 3 HP, 14 AMP 1750 RPM. I'M AFRAID I KNOW LITTLE OF THIS MACHINE BUT LOOKS TO BE FAIRLY GOOD CONDITION BUT HAS NOT BEEN TESTED,SOLD AS IS. I'LL TRY TO ANSWER ANY QUESTIONS.
Columbine X2-EX Self Contained Extrusion Welder. With an output of approx. 12 lbs/hr using 5 mm rod, 8.3 lbs using 4 mm rod. Hardly used, been in dry storage the past few years, Great for liners or for large fabrication projects. 220 Voltage required. One liner welding shoe included. Look at the pictures she has had hardly any usage. The only thing I did was plug it in, turn it on, and wipe off the dust. Item is being offered locally. And I reserve the right to end this auction early. I sell a few of these machines each year. This is be far the cleanest least used machine I have come across lately. Check on new machines they sell upwards towards $7K Great buy. No warranty. No returns
This is a complete running and working extrusion line. If you're serious about buying. Email us a serious offer and we will consider relisting at your price. We are getting ready to move out and would like to have this out of our shop. Now running ABS profile. Does not include drier or grinder but those two pieces of equipment are available. And listed separately on Ebay. It is a 2 inch line but you can run larger profiles with the right die. We have 1 1/2 inch x 1 1/2 inch F trim pieces on it. Should be capable of about 200 lbs per hr of polyethylene(a little more or less depending on the material) Includes extruder with a 7.5 horsepower motor. 220- 3 phase. Old and ugly but simple and strong. Runs simple. Which means it is much more likely to be owner-serviceable, unlike a newer one which would require a technical professional every ... moretime it breaks down. Controller is MagneTek GPD 515. Has 4 heating chambers plus die. Also includes chiller, which is a Tek Temp Inc. TKD 100. Includes a water bath line. Includes Killion puller. Serial number is 9686. Puller has new belts. Running and functioning machines. Would be happy to have you over and let you see it run. Please message us if you have any questions or need additional pictures. We're happy to provide more details if needed. We are located in Delaware. Zip code is 19963. Buyer is responsible for arranging freight pickup and payment. We have a forklift and would be happy to load on a truck. Thanks for looking! Payment is required within three(3) days after the auction has ended. If you are unable to pay within three days. Please get in touch with us. We are easy to get along with and will try to work things out with you. We will ship your item(s) as soon as reasonably possible. For the most part. We ship the next business day after payment is received. Please read each auction carefully. This prevents many misunderstandings. If you are not sure about something just ask and we will respond quickly. Most of what we sell is pre-owned and we are completely h
2 ½ Inch Prodex Plastic Extruder Used W/Panel Was removed from line when the company moved. Was not reinstalled because of over capacity. Operating Voltage 240/460 3 Phase power 25 HP A/C. Panel has 5 Omron Temperature controls 3 Barrel zones 1 Gate 1 Die Barrel L/D Ratio 16 to 1. Has 3 cooling Zones Fans Was running flex PVC& Polyurethane. Water-cooling tanks available) Can be loaded on your truck or trailer Pay-Pal Please Please see our store.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13e6d7318eb-0x104-
STANDARD 1.250" OLYMPIA EXTRUDER ELECTRICALLY HEATED. 22:1 LD BARREL RATIO 10 HP D C MOTOR with SCR DRIVE AIR COOLED BARREL LIQUID COOLED FEED THROAT. CONTROL PANEL: TEMPERATURE CONTROLLERS. 3 BARREL. 3 ACCESSORY ZONES. MELT and PRESSURE 230/460/3/60 43" CENTERLINE HEIGHT SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer ... moreforfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
VERY NICE EXTRUSION WELDER. WORKS GOOD. WAS USED FOR ONE JOB THEN PUT AWAY. NO LONGER IN PLASTIC BUSINESS. NO LONGER HAVE NEED FOR IT. PAID OVER $2000.00 NEW
4.5 in NRM PACEMAKER PLASTIC EXTRUDER 28:1 L/D ratio. Water cooled, Vented. Plugged barrel, Includes 4.5' Beringer screen changer, Includes 60 strands die, Novatec vacuum loader and color feeder with separate controls, Digital Temp controls: 6 zones barrel. 5 zones die, 4 zones screen changer and adapters Please email any questions or offers or call Dustin at(562)201-5428. Visit us at our website for"Freer Plastic Machinery" Thanks for looking!
3.5in PRODEX PLASTIC EXTRUDER Model# TM3545-24 Serial# 1676 24:1 L/D ratio, 50 HP DC Drive Motor and digital temperature controller Machine is in working condition Please email any questions or offers or call Dustin at(562)201-5428. Visit us at our website for"Freer Plastic Machinery" Thanks for looking!
20mm VIRGINIO MAI PLASTIC EXTRUDER NEW. NEVER USED! Model# TN20C30D Serial# 2000/94 30:1 L/D ratio. Air cooled, On Post, Please email any questions or offers or call Dustin at(562)201-5428. Visit us at our website for"Freer Plastic Machinery" Thanks for looking!
1" KILLION/DAVIS LAB COMPOUNDING EXTRUSION LINE EXTRUDER ELECTRICALLY HEATED. 24:1 LD BARREL RATIO 3 HP DC MOTOR. SCR DRIVE REDUCER RATIO: 1 5:1 MAX. SCREW RPM: 120 AMBIENT COOLED BARREL LIQUID COOLED FEED THROAT CONTROL PANEL: DIGITAL TEMPERATURE CONTROLLERS. 3 BARREL. 1 ACCESSORY ZONE CENTERLINE: 41" DIE: THREE(3) HOLE WATER T ROUGH: STAINLESS. 10" x 10" x 52" L. 38" CENTERLINE HEIGHT PELLETIZER MODEL: 2 FEED OPENING: 2" 1 HP DC SCR UPPER FEED ROLL: POLYURETHANE COVERED STAINLESS STEEL. PNEUMATIC BOTTOM FEED ROLL: DRIVEN. STAINLESS STEEL, KNURLED ROTOR ASSEMBLY: STELLITE TIP. SS, HELICAL CUTTER- 24 TOOTH BED KNIFE: 4- EDGE INSERT UNIT MOUNTED ON CASTERS DISCHARGE REAR CHUTE HEIGHT: 36" 230/460/3/60 STRAND CAPACITY: 10(1/8" DIAMETER) THRUPUT: UP TO 65 LBS/HOUR FOOTPRINT: 27" x 25" x ... more50"H. APPROX WEIGHT: 600 LBS. LINE SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
STANDARD BENCH MODEL 1" KILLION/DAVIS EXTRUDER ELECTRICALLY HEATED. 24:1 LD BARREL RATIO 3 HP DC MOTOR. SCR DRIVE REDUCER RATIO: 1 5:1 MAX. SCREW RPM: 120 AMBIENT COOLED BARREL LIQUID COOLED FEED THROAT CONTROL PANEL: DIGITAL TEMPERATURE CONTROLLERS. 3 BARREL. 1 ACCESSORY ZONE HOPPER SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; ... morecustomer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
2" STANDARD PLASTIC EXTRUDER BY STERLING/DAVIS 20 HP VARIABLE SPEED U SVD BARREL: ELECTRICALLY HEATED. AMBIENT COOLING, VENTED, 24:1 LD RATIO REDUCER: 11:1 LIQUID COOLED FEED THROAT CONTROL PANEL: ANALOG TEMPERATURE CONTROLLERS. 4 BARREL. 2 ACCESSORY ZONES EIGHT HOLE STRAND DIE MOUNTED AND WIRED 2" SCREEN CHANGER MOUNTED AND WIRED WITH HYDRAULIC UNIT SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard ... moreskid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
2.5" STANDARD PLASTIC EXTRUDER BY STERLING/DAVIS 30 HP VARIABLE SPEED U SVD WITH ELE CTRIC REMOTE SPEED CONTROL BARREL: ELECTRICALLY HEATED. VENTED, AIR COOLED, 30:1 LD RATIO LIQUID COOLED FEED THROAT CONTROL PANEL: DIGITAL TEMPERATURE CONTROLLERS. 5 BARREL. 1 ACCESSORY ZONE EIGHT HOLE STRAND DIE MOUNTED AND WIRED REBUILT BY BERLYN SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; ... morebeyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
THIS IS A ERLIN 1.5" PLASTIC EXTRUDER WITH HOPPER-FEEDER WAS WORKING WHEN PURCHASED AND HAS NOT RUN FOR 5 YEARS. 10 HP MOTOR IS WIRED 480/3/60 AND I HAVE NO WAY TO TEST THIS MACHINE SO I AM SELLING IT"NOT WORKING. NO RETURN,PARTS. EXTRUDER LOOKS TO BE COMPLETE,NO PARTS MISSING OR CUT WIRES. FLOOR SPACE 50 X 48 X 66, 3000 LBS FOR SHIPPING QUOTES& CREDIT CARDS CALL TINA AT 727-362-8318 SHIPPING WEIGHT IS 3000 LBS FOR ANY QUESTIONS CONTACT GERRY VIA EMAIL OR 727-547-0616. BUYER PAYS ACTUAL SHIPPING FROM 33782. LOCAL INSPECTIONS AND PICKUPS WELCOME. CALL TINA FOR SHIPPING QUOTES@ 727-362-8318 On Jan-04-12 at 21:58:06 PST. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Used-3 1/2" Delta Plastic Extruder. Model D90 350 30, Serial#W0447586 ref# 45163001. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise ... morenoted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Munsch X3-EX Plastic Extrusion Welder High Output Extruder w Padded Case EBM13SK Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description: Munsch X3-EX Plastic Extrusion Welder High Output Extruder w/ Padded Case EBM13SKe Condition: Used Includes: Everything as shown. Nothing else is included Photos are of the actual item(s) you will receive* Please verify that this part number will work for your application before purchasing* All items are guaranteed to be in the condition as stated but are otherwise sold As-Is. FAST SHIPPING! with insurance and Tracking# Terms of Sale-What You See is What You Get If the item up for sale is tested. We will state so clearly. We have such a large array of items that we are not always able to test everything. ... moreIf an item ships with any software or accessories, it will be clearly stated in the item description, and pictured. Always look at the pictures to see what is included in each auction or sale. If it is not in the item description, and it is not pictured, it is not included in the auction. Bidding& Buying Your bid is a contract- Place a bid only if you are serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If payment is not received within 7 days or we are not contacted for payment arrangements within 5 days, the item may be offered to the next highest bidder, or relisted at our discretion. Sales Tax will be charged to all items shipped within Utah at 6.875% Payment We accept payments through PayPal only. We accept credit cards through PayPal. Though you do not have to have a PayPal account to pay with a credit card. When paying with a credit card without a PayPal account. Just click on the pay now button once you receive your invoice and you will be redirected to the PayPal website. Once you are there if you look toward the bottom of the screen there will be a place you can
100 HP Baldor RPM 1750. RPM AD368AT. 500 Arm Volts. Model No. 36801410097. Ser. H108/0104- SLN025. AC Tach Generator. Motors are in great shape. Being cleaned and repainted now! If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time. The office phone is 561-833-9898.
40 HP Hyundai. Frame: 324T. Model: HIS324SR235. 558 LB. 94.8 A/ 47.4 A. Motors are in great shape. Being cleaned and repainted now! If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time. The office phone is 561-833-9898.
Fully operational extruder 1.25” Removed from line because of new equipment Digital Watlow 96 PID temperature controllers(3 barrel and 4 head/die) Approximately 18/1 L/D. Carbide lined barrel. With Compression Screw. Wired for 230V 3 phase. Can be run on single phase Motor: 7.5 hp Marathon Black Max AC Vector motor. 230V/460V. Motor Controller DuraPulse Model GS3-2010. 33Amps. Payment is required within three(3) days after the auction has ended. Can be loaded on your truck or trailer Crating $175.
Fully operational 1.25” extruder Removed from line because of new equipment Watlow 96 PID temperature controllers 8 zones(3 barrel and 5 die/other) Machine is wired for 240V 3 phase. Can be run on single phase. Motor: 5 hp Marathon Black Max AC Vector motor. Duty cont. 230V/460V 3phase. Motor Controller DuraPulse Model GS3-27P5 28Amps; A pproximately 18/1 L/D; Carbide lined barrel. Payment is required within three(3) days after the auction has ended. Can be loaded on your truck or trailer Crating $175.
1 ½” Plastic Extruder. Co extruder or Striper 220V 3 Phase This is a used machine taken from closed factory. Said to have been running when taken down. Extruder on wheeled staff with Panel& hoper. When it was moved they disconnected wrong end of the cord. Should have used cannon plug on panel. It will have to be hooked by a tech whom knows how to. Sold as is where is I have no way to test. Shipping Your Truck Will/Call I can load with forklift. We take Pay-Pal Please Please see our store thank you cimsales
Polyprise Plastic Extruder PI-150 IM400 MFG# 1303513 Date 1996 Located at: Rambros Inc 6141 Arlington Expressway Jacksonville. FL 32211 904-641-0822 RambrosMachinery.com
Extruder Information, Lot Number 5455, Manufacturer Akron Extruder Model PAK 250 Year 1997 Diameter 2.5" L/D Ratio 24:1, Cooled Air, Motor 40 HP, Voltage 460-3-60,
YOU ARE BIDDING ON A USED COLUMBINE LEISTER MODEL X2-SC HIGH OUTPUT EXTRUDER PLASTIC EXTRUSION WELDER. THE PLASTIC WELDER IS FULLY FUNCTIONAL AND IN GOOD USABLE CONDITION. THIS ITEM WILL COME AS PICTURED. SHIPPING TO THE LOWER 48 STATES WILL BE FREE.
Complete Extrusion line. The actual extruder is unmarked. But we were told it was produced by a company called Yaley. We have a full box of books, and spec drawings for this unit. It is a 1 1/2" barrel, and the screw was replaced in early 2000's for PVC plastic extrusion. This line was running at a binding company and extruding PVC filament for spiral book bindings so currently it is set up for a very fine extrusion(ballpark of 2mm at a guess) In addition to the Extruder you will get the following: 1) Puller pictured(belt style) That runs on Reliance drives, and interfaces with extruder, coiler etc. 2) stand alone puller(wheel style) with 110v Dart drive that was currently being used in the set up as pictured. 3) Coiler with Reliance drives. That interfaces with extruder, puller, etc 4)Recoiler. For recoiling on to smaller spools(pictured ... moreout in front of the line) 5) Stand alone chiller made by Cold Shot Chillers for water bath. The stands for the water bath are include however the water bath pictured is NOT included. Nor is the computer behind the line. The whole line is run on 220/220v 3 phase powered off the main extruder unit, except for the 110v puller and recoiler. As described before, the interfaced pullers and coilers are Reliance, with the main PLC being an GE Fanuc. When we purchased the line, the"integrated" puller was not in use. It was sitting to the back and the 110v Dart powered puller was being used instead. Because of that we can not be sure of the functionality of that puller. Other than that, everything else was said to be functional prior to the line shut down. Again, you will need to obtain water baths, and plumb the chiller/ circulator in, but otherwise, all interface cables, etc are included. Any questions. Please feel free to call. We can assist with any specs you need. For this particular line. We will be charging a $300 total fee to crate/pallet all components and ready it for shipping. We would also prefer wire transfer or certified funds rather than credit card for t
2.5" Corma Plastic Extruder Single Screw Very Good Condition Ready to ship!
Used Extruder Mixing Hopper For Plastic. 3' 4" Dia. X 4' 4" Straight Side, 32" Deep Cone With Discharge Auger, Mixer Has 7.5 H.P.Motor. Note: Hopper Was Used As Feed Hopper For Extruder. 2 Available)
Very nice custom extrustion puller from RDN. Was approx. $33.000 new. Crated and ready to go. We purchased a new unit for our new space and this one is taking up room that we desperately need! Can be picked up locally in Rohnert Park, CA or shipped. We can help with shipping cost!
2.5in WELEX"Low Boy" PLASTIC EXTRUDER 30:1 L/D barrel, Model: H250-30 water cooled, cast aluminum heaters, 50 hp DC motor, Extruder does not have dc drive or control panel; otherwise in operable mechanical condition. Heaters and motor are electrically ok Please email any questions or offers or call Dustin at(562)201-5428. Visit us at our website for"Freer Plastic Machinery" Thanks for looking! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-141eee8f2b3-0xfd-
BETOL/DAVIS STANDARD TWIN SCREW CO-ROTATING PLASTIC EXTRUDER 45MM SCREWS CO-ROTATING 41:1 LD RATIO 25 HP DC MOTOR and SCR VENTED ELECTRICALLY HEATED. LIQUID COOLING FULL CONTROL PANEL with SIX(6) BARREL ZONES and FOUR(4) ACCESSORY ZONES APPROX 400 RPM MAX. SCREW SPEED FOURTEEN(14) HOLE STRAND DIE MOUNTED and WIRED BARREL and SCREWS IN GOOD CONDITION GEARBOX MAKING NOISE SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage ... morefee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
1" WAYNE TABLE TOP PLASTIC EXTRUDER ELECTRICALLY HEATED. 30:1 LD RATIO 3 HP DC MOTOR. SCR DRIVE AMBIENT COOLED BARREL LIQUID COOLED FEED THROAT CONTROL PANEL: DIGITAL TEMPERATURE CONTROLLERS. 3 BARREL. 1 ACCESSORY ZONE HOPPER MOUNTED and WIRED 2.5" SHEET DIE WATER BATH SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer ... moreforfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
WERNER& PFLEIDERER STANDARD TWIN SCREW CO-ROTATING EXTRUDER 50MM SCREWS CO-ROTATING 24:1 LD RATIO 35 KVA(47HP) DC MOTOR and SCR VENTED ELECTRICALLY HEATED. AMBIENT COOLING FULL CONTROL PANEL with SIX(6) BARREL ZONES and ONE(1) DIE ZONE APPROX 300 RPM MAX. SCREW SPEED SIXTEEN(16) HOLE STRAND DIE MOUNTED and WIRED BARREL and SCREWS IN VERY GOOD CONDITION UNIT IN VERY GOOD CONDITION RUN APPROX. 5000 HOURS(NO GLASS) SINCE COMPLETE REBUILD SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: ... moreAfter 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
LANTAI TWIN SCREW CO-ROTATING PLASTIC EXTRUDER MODEL: SHJ 32 32MM SCREWS CO-ROTATING 40:1 LD RATIO. VENTED BARREL 40 HP DC MOTOR WITH SCR ELECTRICALLY HEATED. LIQUID COOLED BARREL CONTROL PANEL: SIX(6) BARREL ZONES and FOUR(4) ACCESSORY ZONES MAX. SCREW SPEED: 600 RPM EIGHT(8) HOLE STRAND DIE MOUNTED and WIRED VACUUM PUMP 460/3/60 SCREWS and BARREL SECTIONS IN GOOD CONDITION SPARE: SCREW ELEMENTS MAX. OUTPUT: APPROX. 300 LBS.HOUR SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we ... morecharge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
Davis Standard 2 1/2" Extruder 24/1 LD Ratio Air cooled. 4 heat zones. 30 HP AC Motor with drive Has partial heat control cabinet. controllers missing) Screw wear condition unknown. Contact C.J. 813-719-8134 Prefer no pay-pal FOB/ local pick up Used equipment. Sold in as is condition.
Wegener WEG 322 Thermo Plastic Extrusion Extruder Welder Leister Wegener WEG 322 Plastic Extrusion Extruder Unit is in nice used condition Comes as shown Shipping to lower 48 states only PAYPAL ACCEPTED. PLEASE ASK FOR OTHER PAYMENT OPTIONS IF NEEDED. KANSAS RESIDENTS TO PAY 8.65% SALES TAX SHIPPING WILL BE BY USPS OR UPS UNDER 150LBS. OVER 150LBS WILL NEED TO BE SHIPPED FREIGHT. ALL FREIGHT WILL BE ARRANGED BY THE BUYER. ALL DAMAGES FROM FREIGHT WILL BE THE RESPONSIBILTY OF THE BUYER AND FREIGHT COMPANY. PLEASE INQUIRE FOR ALASKA HAWAII OR OVERSEAS SHIPPING RATES AND ADDITIONAL FEES. PLEASE CONTACT US FOR ANY QUESTIONS YOU MAY HAVE. We evaluate used items based on their external condition. Power up test, self-testing(if applicable) and basic functionality. Any observed problems are noted in the listing. We do not test new-in-box items. We ... morecannot test or guarantee full adherence to published specifications. We allow a 7-day right-of-inspection. The sale price less 15% restocking fee will be refunded for items shipped back in the original condition within this time frame. The return shipping must be by traceable and insured means. The buyer will be responsible for all shipping costs. If we have inadvertently misrepresented an item or have overlooked a functional defect. We will always work to ensure buyer's satisfaction. All claims must be made within 7 days upon receiving the shipment. ALL ITEMS SOLD AS IS WHERE IS. NO WARRANTY IS GIVEN OR IMPLIED. WE TEST OUR ITEMS FOR BASIC FUNCTIONALITY AND OR POWER UP TEST. PLEASE ASK ANY AND ALL QUESTIONS ABOUT ITEM BEFORE BIDDING OR BUYING. ITEM IS AS PICTURED AND AS DESCRIBED. PLEASE CONTACT US BY EMAIL AND WE WILL RESPOND WITHIN 24HRS.
STANDARD MODEL 2.5" ENTWISTLE PLASTIC EXTRUDER MODEL TFII 2500-24 ELECTRICALLY HEATED. 24:1 LD BARREL RATIO 25 HP DC MOTOR. SCR DRIVE REDUCER RATIO: 13.92:1 MAX. SCREW RPM: 130 AIR COOLED BARREL LIQUID COOLED FEED THROAT FULL CONTROL PANEL: DIGITAL TEMPERATURE CONTROLLERS. 4 BARREL, 3 ACCESSORY ZONES STOCK TEMP and PRESSURE GAUGES INCLUDED: CROSS HEAD and 30KVA TRANSFORMER DIMENSIONS: PANEL: 32"D x 68"W x 84"H EXTRUDER: 9.5'L x 3'W x 50"H IN VERY GOOD CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. ... moreSTORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
STANDARD MODEL 1" ENTWISTLE MODEL EC-1000-24 ELECTRICALLY HEATED. 24:1 LD BARREL RATIO 1.5 HP AC VECTOR MOTOR and DRIVE REDUCER RATIO: 15:1 MAX. SCREW RPM: 120 AIR COOLED BARREL LIQUID COOLED FEED THROAT FULL CONTROL PANEL: DIGITAL TEMPERATURE CONTROLLERS. 4 BARREL, 4 ACCESSORY ZONES STOCK TEMP and PRESSURE GAUGES INCLUDED: CROSS HEAD and DRI-AIR HOPPER DRYER. MDL. M2000 DIMENSIONS: PANEL: 32"D x 36"W x 82"H EXTRUDER: 52"L x 24"W x 80"H IN VERY GOOD CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. ... moreSTORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
Merritt Davis 2.5" 40 HP(AC Driven) 24/1(approx) plastic extruder. Has a general purpose screw. Mainly running Rigid PVC. We also ran Flex PVC, ABS, and Santoprene/Uniprene through it. The controls on the barrel have been upgraded Ogden ETR8100 controllers, the Die is controlled by a Eurotherm 808. The motor is driven by a Control Techniques UNI drive. Occasionally the drive will throw an HF83 error, but can be cleared off pretty easily. Everything else works perfectly fine on the machine; includes original manuals and wiring diagrams. Machine is still powered and installed. Appointment can be made to inspect machine. We can load onto truck, or palletize for additional fee.
Berlyn 32;1 Plastic extruder. 4.5" vented with screen changer 150 HP Reliance DC motor. 1150 RPM, 500v( no drive or controls) electrically heated/water cooled.6 zone 3:1 High output screw All gears and bearings in good shape. Was last running PP in dec. of 2009 NO RESERVE. Will load for free, Bank check only please? email or call Gary@ 330-289-0178 Thanks
Gloucester 4.5" 32:1 Plastic extruder. Vented. Barrel ID 4.513" and is in good shape( no gouges or pitting) Clamp electrically heated. Water cooled( cond. of the heaters is unknown as I have not powered them up) No screw or motor. Gear box is rated@ 250 HP with a 1.75 service factor. Feed box opening is 6" X 13.5" Twin cooling zones and a NEW Fluted liner. Entire machine was stripped to bare metal and repainted gearbox was completely disassembled all new bearings(including thrust bearing) The customer I was building this for is no longer in the plastic business. His loss is your gain as I can no longer store it. Bank check only please. I will load for free. email? or call Gary 330-289-0178 NO RESERVE.
3.5" DAVIS STANDARD HEAVY DUTY PLASTIC EXTRUDER MODEL: 35IN35H 150 HP AC VECTOR MOTOR and DRIVE ELECTRICALLY HEATED and VENTED with VACUUM PUMP 30:1 LD BARREL RATIO REDUCER RATIO: 17:1 MAX. SCREW RPM: 115 AIR COOLED BARREL LIQUID COOLED FEED THROAT CONTROL PANEL: EUROTHERM 2208 TEMPERATURE CONTROLLERS. 4 BARREL, 3 ACCESSORY ZONES, PRESSURE, STOCK TEMP XALOY 3.5" SLIDE PLATE HYDRAULIC SCREEN CHANGER. WIRED and MOUNTED with HYDRAULIC PAK 8 HOLE STRAND DIE MOUNTED and WIRED NEW: 2000 MAX RATE: APPROX. 550 LBS.HOUR SHUT-DOWN IN VERY GOOD RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any ... moreparticular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
You are bidding on 1 Extruder(Plastic) Mfg: Custon Scientific Instruments Co. Model: CS-194AV-215(CSI Max Mixing Extruder) FERMI NATIONAL ACCELERATOR LABORATORY SALES TERMS FOR ASSETS SOLD THROUGH E-BAY- Successful Bidder is required to supply transportation and is responsible for all related costs. The Bidder should provide adequate trucks. Dunnage, blocking, bracing and tie downs. Seller will load assets onto the Bidder’s trucks. FOB Fermi. Freight collect. Personal property purchased from the U.S. Government may or may not be authorized for export from the United States to a foreign country. The purchaser must be a United States citizen or permanent resident alien and/or if purchasing for a company or corporation. The company or corporation is a United States owned company or corporation. Purchasers must complete a Citizenship Self-Certification ... moreform and an Export Control and Proliferation Sensitive Property Acknowledgement form. All assets are listed and sold on“AS IS. WHERE IS AND WITH ALL FAULTS” conditions as of the date of sale and prospective bidders are advised to conduct due diligence research before placing bids. ALL SALES ARE FINAL” The bidder is invited and urged to inspect the property prior to submitting a bid. Property will be available for public inspection/pick-up at Site 38 Whse. 2 Fermi National Accelerator Laboratory. Batavia. Il. Inspection and pick-up may be made during weekdays between the hours of 7:30 a.m. and 2:30 CST. A 24-hour notification is required prior to coming to the site by contacting the Property Office at(630)840-3585. Directions may be obtained from the Property Office. Full payment is due within seven(7) calendar days from the end of the auction. Fermilab payment terms are: Any auction with a winning bid under Five Hundred Dollars($500) may be paid via Personal. Business check, and certified checks. Any auction with a winning bid above Five Hundred Dollars($500) must be paid with a Certified Check. Cashiers Check, or Travelers Check. DO NOT
WE NEED TO GET RID OF THIS! ALL SERIOUS OFFERS WILL BE CONSIDERED! Please call us if you have any questions: 302) 856-3400 This is a complete running and working extrusion line. If you're serious about buying. Email us a serious offer and we will consider relisting at your price. Now running ABS profile. Does not include drier or grinder. But drier is listed separately for sale- we have already sold the grinder. It is a 2 inch line but you can run larger profiles with the right die. We have run 1 1/2 inch x 1 1/2 inch F trim pieces on it. Should be capable of about 200 lbs per hr of polyethylene(a little more or less depending on the material) Includes extruder with a 7.5 horsepower motor. 220- 3 phase. Old and ugly but simple and strong. Runs simple. Which means it is much more likely to be owner-serviceable, unlike a newer one which ... morewould require a technical professional every time it breaks down. Controller is MagneTek GPD 515. Has 4 heating chambers plus die. Also includes chiller, which is a Tek Temp Inc. TKD 100. Includes a water bath line. Includes Killion puller. Serial number is 9686. Puller has new belts. Running and functioning machines. Would be happy to have you over and let you see it run. Please message us if you have any questions or need additional pictures. We're happy to provide more details if needed. We are located in Delaware. Zip code is 19963. Buyer is responsible for arranging freight pickup and payment. We have a forklift and would be happy to load on a truck. Thanks for looking! Payment is required within three(3) days after the auction has ended. If you are unable to pay within three days. Please get in touch with us. We are easy to get along with and will try to work things out with you. We will ship your item(s) as soon as reasonably possible. For the most part. We ship the next business day after payment is received. Please read each auction carefully. This prevents many misunderstandings. If you are not sure about something just ask and we will respond quickly. Most of what
NRM 2 1/2" Plastic Extruder With Emerson Quantum III DC Drive Fully Functional Ceramic Heater Bands Relay Controls with Fuji Digital Temperature Control Newer Emerson Quantum III DC Drive 500 V DC 30 HP Motor 480 Volt Input AC ur Price: $14.900.00 Status: Used Very Good For more information: Call Dave Drozdenko at 860-484-4449 or email davidd@globalmachinebrokers.com Availability: Usually Ships in 3 to 5 Business Days Item# 11275
This is a lot of used clay forming items. Also useable for dough, sugar paste, polymer, etc. They have all been used and show wear as seen in photos, all fully functional. As follows: Metal Kemper Tools K45 extruder with 19 interchangeable discs. Wood handled roller for perforating/indenting Two vintage plastic molds- shark and anchor imprinted with"Wang's International Made in Taiwan" 4 plastic press molds- circle. Oval, square, hexagon. Imprinted with"1980 LK MFG CORP 1 plastic star shape cutter.
collectible LOT OF 13 CELLULOID BUTTONS. MADE WITH PYROXLYN AND CAMPHOR AND STARTED IN 1869. THIS LOT HAS WAFERS. TIGHT CAPS, BALL BUTTONS AND TWO PIECE CONSTRUCTION. VARIETY OF COLORS OF BEIGE, WHITE, BLACK, PINK AND BROWN ETC. BUTTONS MEASURE FROM LARGE 1 1/4" AND DOWN IN SIZE TO 11/16" EXCELLENT TO VERY GOOD CONDITION AND A VARIETY OF SHANKS SUCH AS SEW-THRUS, METAL SHANKS AND SELF SHANKS. SHIPPING TO U.S.OR CANADA IS $4.00 BUT PLEASE WAIT FOR AN INVOICE. THANKS FOR LOOKING.
This a used AS IS 2-1/2 Johnson Extruder. We are asking $7.000 or best offer please email if you with any question. Thanks
C W Brabender Screw Feed. Hopper Feeder for Plastic Injection Molding or Plastic Extruder Voltage: 120 vac I only have the item as pictured. Condition: USED. Good working condition shipping to the lower 48 $29.00 Questions: Bob@ 508-655-9171 weekdays ET
Automated Manufacturing Systems 514 14th Street West Palm Beach FL 33401 561 386 8561 Feed Section for 2.5" Sterling Extruder Call if you need bolt pattern dimensions or any other pictures. Terms: Payment in full prior to shipment If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com References are available upon request. We are a small company but offer the highest quality and best customer service. My name is Brandon and my cell# is 561-386-8561. My email is rbbell@unh.edu. Feel free to call or email any time.
NRM Gearbox. Originally used on a 18:1 machine 17:1 Ratio on the gearbox Seals replaced. Appears in good condition. Auction includes as pictured: 3.5" NRM gearbox. Feed setion, 75HP Baldor Super E motor, frame extension Let us know what you need. We can rebuild this 3.5" machine to your specification. Call us today! Paypal is NOT accepted. We are not a broker. We are a small extrusion company. We currently specialize in production of new extrusion equipment of our own design. If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time.
You are bidding on a 2" Egan Extruder Philadelphia Gear Drive Serial: 69206 Ratio 14.1-1 Size Type H-1210-F. Please email for more information or best offer.
You are bidding on a used 2-1/2 Egan Power Flight Extruder Model No. H-2515 Serial: 40400 Ratio: 14:1 RPM 1750. We are asking $10.000 or best offer please email you with any question. Thanks
Tempco Heating Bands 3994402 G 99 9 2350W 240 480 V THIS ITEM IS USED AND APPEARS TO BE IN FAIR CONDITION. THIS ITEM WAS NOT TESTED AT OUR FACILITY. BUT IT IS GUARANTEED TO NOT ARRIVE DOA. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 3994402 G 99 9 APPROX. PRODUCT DIMENSIONS: LENGTH: 6" WIDTH: 6" HEIGHT: 5" SHIPPING WEIGHT: 8 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. ... moreTHERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER
Max 2000 Heatron Heating Band B5J3N19-A1 480V 1600W Lot of 2 THIS ITEM IS USED AND APPEARS TO BE IN FAIR CONDITION. THIS ITEM WAS NOT TESTED AT OUR FACILITY. BUT IT IS GUARANTEED TO NOT ARRIVE DOA. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# B5J3N19-A1 APPROX. PRODUCT DIMENSIONS: LENGTH: 6" WIDTH: 6" HEIGHT: 4" SHIPPING WEIGHT: 8 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. ... moreTHERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HO
Grab Box of 8 Various Brand Heating Bands 2" 3.5" THIS IS A GRAB BOX WITH VARIOUS MAKERS. MODELS AND SIZES. SOLD AS IS, WITH NO WARRANTY. YOU WILL RECEIVE ALL ITEMS PICTURED. NO QUESTIONS ANSWERED ON THIS LOT. SEE PICTURES FOR OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# VARIOUS WEIGHT: 10 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR ELECTRICAL SURPLUS(19522) FACILITY. SHIPPING: WILL SHIP UPS TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS ... morePACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: NO REFUNDS OR RETURNS ON THIS LISTING. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS. COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. WE WILL NOT LEAVE FEEDBACK FOR BUYERS UNTIL WE RECEIVE FEEDBACK. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. B
I.H. CO. Heater Band 230 Volts 1125 Watts. Lot of 7 THIS ITEM IS USED AND APPEARS TO BE IN FAIR CONDITION. THERE IS SOME COSMETIC WEAR AND IS GUARANTEED TO NOT BE DOA. WE ARE UNABLE TO TEST THIS AT OUR FACILITY. SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# I.H. CO. APPROX. PRODUCT DIMENSIONS: LENGTH: 4.5" WIDTH: 4.5" HEIGHT: 4" SHIPPING WEIGHT: 16 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT ... moreOF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRAN
2.5 in JOHNSON PLASTIC EXTRUDER 24:1 L/D ratio, 5 zones air cooled cast aluminum heaters, Control mounted on extruder with digital temperature controllers Upgraded mixing screw in good condition, Complete extruder in good working condition, Please email any questions or offers or call Dustin at(562)201-5428. Visit us at our website for"Freer Plastic Machinery" Thanks for looking!
Espanol& English Speaking Sales Agents Available MORE PHOTOS AVAILABLE VMI-AZ 120 mm extruder. Gmbh-VMI Group, Type MCTD 120 mm. 12/1 L/D, Order 1.94.053 Unit 598. Hydraulic Drive Power Roll Feed Reliance RPM AC 100 Hp Motor NO A/C DRIVE/CONTROLER 460/Volts/60Htz/3ph Extruder was new in 1995 Used last in Rubber Polymer Research Lab Excellent Condition TERMS: PAYMENT FULL PRIOR TO SHIPMENT PAYMENT METHOD: WIRE TRANSFER LOADED PRICE FOB AKRON. OH. $78,000.00 USD OR BEST OFFER CONTACT: PEBSCOSALES@GMAIL.COM*PLEASE VIEW ALL PEBSCO INVENTORY FOR SALE ON EBAY BY TYPING IN"PEBSCO" UNDER ALL LISTINGS SEARCH BAR
You are bidding on a used 3-1/2 Prodex Extruder. We are asking $12.000 or best offer please email epp@elkinsprecisionproducts.com you with any question. Thanks
1.125" SINGLE SCREW THERMOPLASTIC EXTRUDER ELECTRICALLY HEATED. 24:1 LD BARREL RATIO 5 HP DC MOTOR. NO DRIVE REDUCER RATIO: 30:1 MAX. SCREW RPM: 66 AIR COOLED BARREL TWO(2) BARREL ZONES. TWO(2) ACCESSORY ZONES NO CONTROL PANEL NO SCREW INCLUDED: HEAD. SWING CLAMP and DRI-AIR HOPPER DRYER. MDL. M2000 SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits ... morethe rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
Item Extruder Plastic Sterling 10" 250mm Plastic. One(1) Used Sterling 10" 250mm) Plastic Extruder. 20/1 L/D, 500 HP DC, 1750/1900 RPM, 500 V, 41.8:1 gearbox ratio, Philadelphia gearbox Shipping Terms: Ex works- Ohio. USA Payment Terms: Net Prior to shipping Delivery Time: Stock/ Immediate Please advise if you have any questions or would like to schedule an inspection. Soberay& Sons. Ltd. Rubber Machinery Experts http:www.soberaysons.com, Inventory on Website, Phone: 216-334-2003, Fax: 216-334-2005, 5500 Walworth Ave. Cleveland. Ohio 44102, United States,
Item Extruder Plastic HPM 2 1/2" 60mm 2.5" Plastic 24:1. One(1) Used HPM 2.5” 60mm 2 1/2" Plastic Extruder. 24:1 L/D, electrically heated, air cooled, 30 HP dc motor with scr controller, control panel with 3 barrel and 1 die zone, top vented with plug, serial# 88449 Shipping Terms: Ex works- Ohio. USA Payment Terms: Net Prior to shipping Delivery Time: Stock/ Immediate Please advise if you have any questions or would like to schedule an inspection. Soberay& Sons. Ltd. Rubber Machinery Experts http:www.soberaysons.com, Inventory on Website, Phone: 216-334-2003, Fax: 216-334-2005, 5500 Walworth Ave. Cleveland. Ohio 44102, United States,
Item Extruder Plastic Werner& Pfleiderer 2 1/3” 58mm 2.3" Twin Screw 12:1. One(1) Used Werner& Pfleiderer 2.3” 58mm 2 1/3" Twin Screw Extruder. 12:1 L/D, Type Continua 58/12D, Reliance Motor 25HP DC 1750RPM 500V, Gearbox rated for 40HP, co-rotating, 3 heating zones, electrically heated, water cooled, vented, control panel and pump included, Type 2A48/500, Year 1986, Machine No 221643 Shipping Terms: Ex works- Ohio. USA Payment Terms: Net Prior to shipping Delivery Time: Stock/ Immediate Please advise if you have any questions or would like to schedule an inspection. Soberay& Sons. Ltd. Rubber Machinery Experts http:www.soberaysons.com, Inventory on Website, Phone: 216-334-2003, Fax: 216-334-2005, 5500 Walworth Ave. Cleveland. Ohio 44102, United States,
Item Extruder Plastic Welex 2" 50mm Plastic 24:1. One(1) Used 2” Plastic Welex Plastic Extruder. Model 200-24/1-RHNV, 24:1 L/D, electrically heated, air cooled, 20 hp dc motor, 3 barrel, 1 die zone, Welex gearbox 10/1 ratio, 175 RPM output, 48 HP max, serial#4437, built 1986 Shipping Terms: Ex works- Ohio. USA Payment Terms: Net Prior to shipping Delivery Time: Stock/ Immediate Please advise if you have any questions or would like to schedule an inspection. Soberay& Sons. Ltd. Rubber Machinery Experts http:www.soberaysons.com, Inventory on Website, Phone: 216-334-2003, Fax: 216-334-2005, 5500 Walworth Ave. Cleveland. Ohio 44102, United States,
DAVIS STANDARD 130 mm EXTRUDER ASSEMBLY Model 130 MM 45HT. SPECIFICATIONS 130 mm diameter 30:1 L/D 1989 year of manufacture Accepts 200 HP DC drive Comes with 130 mm HDPE screw Barrel heaters are not included PAYMENT We accept pay pal wire transfers and cashier's checks as forms of payment. Once payment is received and clears the item purchased will be ready for shipment. If paid by check. The check must clear JMI's bank before shipment. SHIPPING F.O.B. Port Washington. WI 53074. The buyer is responsible for arranging pick-up. JMI will load the truck. WARRANTY All items offered"Used-As-Is" Anyone is welcome to come and inspect an item in person during regular business hours. Monday thru Friday, 8:00 AM to 4:00 PM. If you are unable to come and see the item, let us know what additional information or photos you require for ... moreyour decision making process. We will do our best to comply to your request. We reserve the right to cancel this auction at any time. CONTACT US If you have any questions. Please call Bob Jackson at 262-284-1066 or e-mail us to We can also be reached via fax at 262-284-5466. FEEDBACK We pride ourselves in providing you with the best customer service. Please contact us by phone or by e-mail. We will work with you to resolve any issues as quickly as possible.
Haake Rheocord 90 PolyLab QC Plastic Extruder Mixer with PC Interface This is large and heavy unit. Must be shipped by truck. You can pick up free of charge, or we can help you to arrange shipping to your destination. No other parts. Manuals, or other accessories included See actual picture. 1. no warranty. 2. If you have any questions regarding this item. Please contact me_before_ bidding. Additional shipping discounts for multiple units are available. Expedited shipping can be arranged upon request. Other Notes of Interest S&H: Multiple items purchased will be considered for discounted shipping. Shipments: All items will ship within 1-2 business days of payment receipt. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. ... morePlease check with your country's customs office to determine what these additional costs will be prior to bidding or buying. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-1475acecc81-0x10c-
200 HP Motor qty 2 available this auction is for qty(1) only. Motors are in great shape. Being cleaned and repainted now! If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time. The office phone is 561-833-9898.
The pictures shown are an example. The machine pictures is already sold. We have qty(2) NRM machines in stock we are rebuilding and they are available for sale! We will build to suit! NRM Gearbox. About 24:1 L/D 17:1 Ratio on the gearbox Seals replaced. gearbox rebuilt. Auction is for a similiar rebuilt 2.5" NRM Extruder same model as shown! 2.5" NRM gearbox. Feed setion, 40HP Baldor Super E motor. Let us know what you need. We can rebuild this 2.5" machine to your specification. Call us today! Paypal is NOT accepted. We are not a broker. We are a small extrusion company. We currently specialize in production of new extrusion equipment of our own design. If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out ... moreour website www.ams-plasticextrusions.com My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time.
60 HP Reliance Electric DC Motor off of a NRM 2.5" Extruder. Motors is in good condition and was decommissioned off of a running extruder. If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time. The office phone is 561-833-9898.
Haake Rheocord 90 PolyLab QC Plastic Elastomer Extruder Lab Mixer Head No other parts. Manuals, or other accessories included See actual picture. 1. no warranty. 2. If you have any questions regarding this item. Please contact me_before_ bidding. Additional shipping discounts for multiple units are available. Expedited shipping can be arranged upon request. Other Notes of Interest S&H: Multiple items purchased will be considered for discounted shipping. Shipments: All items will ship within 1-2 business days of payment receipt. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. RcmdId ViewItemDescV4,RlogId ... morep4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-147cc6b273e-0x115-
Let us know what you need. We can rebuild this 2.5" machine to your specification. Call us today! Paypal is NOT accepted. We are not a broker. We are a small extrusion company. We currently specialize in production of new extrusion equipment of our own design. If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time.
Haake Rheocord 90 PolyLab QC Plastic Banbury Extruder Lab Mixer Head This is for the HEAD ONLY. Rheocord 90 depicted in last 3 pictures are NOT included. But available if needed for additional money See actual picture. 1. no warranty. 2. If you have any questions regarding this item. Please contact me_before_ bidding. Additional shipping discounts for multiple units are available. Expedited shipping can be arranged upon request. Other Notes of Interest S&H: Multiple items purchased will be considered for discounted shipping. Shipments: All items will ship within 1-2 business days of payment receipt. International Buyers– Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what ... morethese additional costs will be prior to bidding or buying.
Great running small extruder 1 1/2" we think but are not 100% sure. We have used this machine for several years for testing color samples before production runs. The die plate mounted on it has a 0.250"X1.000" Slot for making a ribbon. Any questions please call Justin 843-680-0300 thanks. Machine is in storage but can be hooked back up like we did for the video if you would like to come see it running. Sold as with all Faults. We will load this machine for you at no charge. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-14880e14a1a-0x10f-
We'll help train you have other sellers ever run an extruder? have other sellers ever run the extruder you'll be using? we can help with setup& running(We HAVE done it ourselves) Full line. You don't have to buy an extruder, then try to find a puller and/or water bath to match, or vice versa we will palletize and ship anywhere in the Continental US shipping and handling cost is included in the price you won't find a complete running line anywhere close to this price take out the headaches of matching individual components. Getting it to your site, and getting it to run. We can and will help you. If you are buying extruded stock right now. This machine is a money and scheduling bonanza for you- you are paying thousands buying extrusion profiles for a full production run when you may not need all that material or cost- you ... morehave to order 3 to 6 weeks in advance when buying extrusion- you are now paying $1000's for extrusion that will only cost you $100's to make- if you have scrap plastic like the extrusion you need this machine is a must have. You will not need to dispose of scrap/garbage and you can use it to have your raw materials for free(you will need a grinder that is not included with this sale) You will be basically getting your extrusion profile for just the labor it takes to run the machine. We did this and saved $10.000's per year. you will be able to produce product WHEN you need and the AMOUNT you need for pennies vs. thousands we saved tens of thousands of dollars each year that we used the machine we no longer manufacture the product that we used the extrusion for. So now it is your turn to save tons of $$ simple to run and after set up can generally be run by a reasonably intelligent laborer if you have reasonable mechanical/electrical skills it is easy to set up and run and we will be happy to help you get going. we will videotape the simple breakdown before we palletize. disconnect wiring from power) label all for you so you can easily reassemble the line we will vi
Kollmann Gear Extruder Duty 24:1 l/d(Ratio is 13.95 to 1) With Matching 2.50 HDPE Barel/ Screw/ and Heaters. Only 6 mo. Run Time! Will help with loading but will not ship. $500 paypall deposit at end of auction. Balence due by bank check at time of pickup. Thanks for looking
Makin's Professional Ultimate Clay Extruder with 20 discs In original packaging sleeve with a plastic storage case. For Air Dry or Oven Baked Clays. Use with ALL clays. Preowned but never used. Not recommended for children under the age of 8 because of small and sharp pieces. Instructions on the back of the cardboard outer sleeve. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-148e3a9aa39-0x110-
in titles& description Name: Prodex T450-24 Plastic Extruder Profile Type with 4-1/2' Diameter, Ticket# 23312, Model: T450-24, Capacity: 4 1/2" Dia, Size: 150 Hp, Manufacturer: Prodex, Item located at: Perkasie. PA, Serial# 1632, Condition: Used, Terms& Condition: As is where is, Description: With Conair Loader. Prodex Straightening Rolls and Sliding Auto Cut-Off Saw with Push Button Control | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
in titles& description Name: Welex 250-24 Plastic Extruder Profile Type with 2-1/2' Diameter, Ticket# 23316, Size: 40 Hp, Manufacturer: Welex, Item located at: Perkasie. PA, Serial# 2175-8-82, Condition: Used, Terms& Condition: As is where is, Description: Normal 0 false false false EN-US X-NONE X-NONE Manuals/ Schematics are avaiable for the Welex are available. the following information was provided by the manuals: Size: 2 1/2" 24:1 Powr Supply 480 V. 3 ph, 60 Hz Control 110 V. 1 ph, 60 Hz Also includes: Conair CS-150/D150 Carousel Portable Dryer Model CS-150/D150 S/N 167856 Conair Dust Beater Feed Table& Table Conair Metaplast Model MST8 Saw with Digital Counter Model MST8 S/N 991014 Conair Metaplast Model DT7-18 Dump Table Model DT7-18 S/N 991017 | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A ... moreMachinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
Leister Mini Dohle Plastic Extruder CS Up for sale. A Leister Mini Dohle handheld Extruder Welder CS. This plaster welder is in good overall condition and good working order. The only minor issue is that the cover of the trigger has been removed- the trigger function still works properly. The original retail price was over $4000. A spool of plastic cord is available for free but an additional $20 for shipping. Please email if interested. Shipping: Free insured shipping for the winning bidder to anywhere in the contiguous 48 United States via Fedex or USPS. International bidders as well as bidders from Hawaii and Alaska: please contact me before bidding to obtain a shipping quote. Payment: Paypal accepted- shipment must be fully insured and sent to Paypal address. Payment must be received within 7 days. I offer professional and courteous customer ... moreservice to all bidders. Please feel free to contact me with any questions. Thanks for viewing and check out my other auctions. Powered by The free listing tool. List your items fast and easy and manage your active items.
2 Inch Screw Running Pulled out of service Ran P.E last With Cross head for Wire cable or Tubing with insert. 24 To 1 L/D 15 HP Baldor 460/240 Three Phase Motor 5 Temp Control. Air Cooled.
metabo be1020 with leister heat system. For plastic welding, great working condition `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-1493c1cbe9a-0x111-
A utomated M anufacturing S ystems www.ams-plasticextrusions.com 5700 Columbia Circle West Palm Beach Florida. 33407 Davis Standard 1.5" Co Extruder 230V Machine. Also has 575V transformer on-board. 1. QTY(5) HEAT/COOL barrel zones. QTY(1) HEAT/ONLY die zones, including mercury relays, fuse protection and associated wiring and thermocouples 2. Motor STOP/START station. With Screw RPM and Motor Amp Displays and ten turn potentiometer. 3. 10 HP DC Motor 4. 10 HP DC Motor Control. 5. QTY(4) Barrel Blowers for Cooling. 6. High Temperature Barrel heaters 7. Digital Pressure display optional for additional charge. Mechanical Specifications and Hardware include the Following: 1. Approx 32 to 1 Bi-metallic Barrel 2. Flanged end or bolt on end will confirm. 3. New Screw. 4. Hopper Approximately 50 LBS. 5. Heavy Duty Double Reduction Gear Box. ... more6. Machine to be geared 0-120 Screw RPM. 7. 10000 PSI Rupture Disc. 8. Frame Mounted Control Panel. 9. Insulation and Barrel Cover. 10. Machine has new temperature controllers. Terms: Before shipment Terms. Ready for shipment. Payment in full prior to shipment. No paypal. Call for more specifications. 561 833 9898 Paypal is NOT accepted. We are not a broker. We are a small extrusion company. We currently specialize in production of new extrusion equipment of our own design. If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time.
KANNEGIESSER KMH-100 PLASTIC EXTRUDER. Specifications Brand: KANNEGIESSER, Condition: USED. AS-IS" Model: KMH-100, Type: Serial# 7.004.81, Power Rating: Weight: 3808 LBS. Category: OTHER, ERC# MO-1081, Job# 006, Location: X FLOOR, Additional Notes: HAS(2) REGOPLAS 150 KL TEMPERATURE CONTROLLERS, Payment Shipping All items are shipped out United Postal Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal rates applying. To determine shipping charges there is a UPS ground shipping calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International fees applying. Items over UPS weight and size restrictions will be sent via common carrier. The customer is responsible for the freight charge. Unloading ... moreof the freight and/or picking up the freight at the terminal if possible. ERC will work with the customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier Internationally. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warhouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department, please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service We pride ourselves on being a leader in customer service. We have developed positive relationships around the world. If you have an issue with an item. Please contact(800) 372-2408. About Us Here at Equipment Recovery Corporation. We are dedicated to you and all y
FOR SALE WE HAVE A USED 4.5" NRM/ DAVIS STANDARD PACEMAKER PM III PLASTIC EXTRUDER. 32:1 L/D, 100 HP D/C MOTOR DIRECTLY COUPLED TO A 25.14 GEARBOX, WATER COOLED, 8 ZONE& VENTED BARREL, UNITIZED CONTROL PANEL WITH EUROTHERM 2208 ZONE CONTROLS- 12 ZONES TOTAL, PANEL INPUT IS 460V/3/60, 1999 MODEL YEAR. Sold as is Price includes loading onto a open flatbed truck from the Midwest. Used Plastics Equipment Sales Contact: Chris 847.778.5517 chris@520machinery.com!FINANCING AVAILABLE! To see if you qualify contact Celeste Bozzi 708-257-9470 or email at celeste@520financegroup.com Purchasing Information: There is a strong chance that this item may sell locally at our facility before we take it down from ebay. Please verify it’s availability before purchasing! Specifications and features are subject to buyer verification Cleared funds are ... morerequired prior to shipment Payment methods include wire transfer. Certified check, or company check Skidding/Crating of items are extra costs. This is in addition to the actual shipping charges paid by the buyer. We have the right to resell the item if it is not paid in full within 10 days of the auction. All items are subject to prior sale. For the purpose of obtaining shipping quotes our Zip Code here is 60007.
This machine was purchased to service a manufacturer to process pellets. it was never used when the customer's needs changed. It includes a cooling bath. And a 8" Pelletizer. It is 3 ph 240 with a transformer to convert to 3 ph 460. 240-439-0709
Great running 6" NRM Extruder 24:1 vented barrel. Barrel was New in 2013. New HIPS Screw in 2013 and New ABS Screw in 2014. 300HP DC Motor rewound in 2013. Motor drive was also replaced New at the same time. 52" quick adjust Cloren Sheet die new in 2006 with 2 lower lips. 1 Range.001"0.500" and#2 range 0.500"0.875" 59" wide Prodex Down stream with Smooth Rollers and a Haircell roller. We have a spare Smooth top and middle roller. 6" Berlyn Screen Changer. 54" Famco shear and 3 Sterlco temperature control units. The shear has a digital controller for shearing to length new in 2014. Also we have a controller for the feed augers. Augers and Controller new in 2014. Currently under power and running. Any questions call Justin 843-680-0300. Video of machine running Sold As Is with all Faults All sales ... moreare final with no returns. Price includes loading on to your truck.
Mini Extruder Plastic Welding Technologies Description This item has been used and shows signs of use. I plugged it in. It got hot and the wire feed works. That is the furthest I was able to test it. Please see photos for details. 1-240060123395-ly Pictures are of actual items. You are bidding on what is pictured. Ebays Product Descriptions may not always reflect what you get in the auction. Please look at our description and photos. Thank You Terms and Conditions We pride ourselves on providing the best possible customer service. Should any issue arise please contact us and we will do our best to ensure a speedy and satisfactory response. Our current office hours are Monday through Friday 9am to 5pm CST. Inquiries made outside of these hours will be answered as soon as possible. PAYMENTS: Payments must be made through Paypal. Payment must ... morebe received within 7 days of the auction's end. Items left unpaid for more than 7 days are eligible to be relisted and/or have an unpaid item claim filed. SHIPPING Please be aware of our shipping charges prior to placing a bid. Items are typically shipped within two business days of receipt of payment. You will be notified when your item has been shipped. We are not responsible for shipping and/or delivery delays resulting from factors outside of our control. Including acts of nature, strikes, etc. Combined Shipping: We offer combined shipping. Please email after the auction's end requesting a revised/ combined invoice. Requests for combined shipping will be handled on a case by case basis. It may not be possible to combine certain larger items if we feel it may jeopardize a safe arrival. Local Pick up: We offer local pick up in some locations. Please email after auction’s end to request local pick up. Local pick up items must be paid for in advance via Paypal and you must show your Paypal receipt at the time of pick up. Local pick up items left unclaimed for longer than 21 days will be refunded and relisted. We are currently not offering international shipping. Orders