In 
 
Order by: 
Available to: 
Price: 
 - 
$
29,500
Buy It Now
Free Shipping
Condition: Used
Location: Cleveland,OH,USA
$
58,900
Buy It Now
$0 Shipping
Condition: Used
Location: Miami,FL,USA
Davis Standard 3.5 inch 24:1 extruder with general purpose screw. 75 hp dc motor with digital controls model 35vt 1739:1 gear reduction operational
$
48,950
Buy It Now
$0 Shipping
Condition: Used
Location: Miami,FL,USA
Used-Davis Standard 1.5" Single Screw Extruder. Model DS-15, Serial#K5422, SO#01045, Year Built 1988, Electrically Heated, Air Cooled ref# 45119003 ... moreSteven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13efc29ea39-0xf3-
$
39,500
Buy It Now
Free Shipping
Condition: Used
Location: Phoenix,AZ,USA
$
12,000
Buy It Now
Free Shipping
Condition: Used
Location: Eugene,OR,USA
$
9,500
Buy It Now
Free Shipping
Condition: Used
Location: Elk Grove Village,IL,USA
$
56,920
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: West Palm Beach,FL,USA
$
17,500
Buy It Now
$0 Shipping
Condition: Used
Location: Elk Grove Village,IL,USA
$
11,500
Buy It Now
$0 Shipping
Condition: Used
Location: Saint Paul,MN,USA
$
9,500
Buy It Now
Free Shipping
Condition: Used
Location: Fountain Valley,CA,USA
$
12,000
Buy It Now
Free Shipping
Condition: Used
Location: Eugene,OR,USA
$
50,000
Buy It Now
$0 Shipping
Condition: Used
Location: San Marcos,CA,USA
$
59,500
Buy It Now
Free Shipping
Condition: Used
Location: Ararat,NC,USA
$
28,495
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: West Palm Beach,FL,USA
$
52,885
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: West Palm Beach,FL,USA
$
2,850
Buy It Now
Free Shipping
Condition: New
Location: West Palm Beach,FL,USA
$
73,000
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: West Palm Beach,FL,USA
$
139,500
Buy It Now
$0 Shipping
Condition: Used
Location: Morrison,TN,USA
$
46,000
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: West Palm Beach,FL,USA
$
1,500
Buy It Now
$250 Shipping
Condition: Used
Location: Scottsburg,IN,USA
$
26,495
Buy It Now
$0 Shipping
Condition: Used
Location: West Palm Beach,FL,USA
$
1,900
Buy It Now
Free Shipping
Condition: Used
Location: Watertown,CT,USA
$
99.99
Buy It Now
$15 Shipping
Condition: New
Location: China
$
88.88
Buy It Now
$15 Shipping
Condition: New
Location: China
$
99.99
Buy It Now
$22 Shipping
Condition: New
Location: China
$
66.66
Buy It Now
$15 Shipping
Condition: New
Location: China
$
3,995
Buy It Now
Free Shipping
Condition: New
Location: Gardner,MA,USA
$
1,495
Buy It Now
Free Shipping
Condition: Used
Location: Gardner,MA,USA
ITEM NUMBER: 5277 PELLETIZER PARTS CUMBERLAND USED: Cumberland 6" Bolt on Rotors 8. 12& 16 knife Used Cumberland pelletizer rotors. Fits 6" ... morestandard. And quietizer pelletizer. Price is for one rotor. We carry a full line of replacement parts for Cumberland. Conair, and other pelletizers. We deal in all sorts of plastic machinery. Please contact us if you are looking to buy or sell. Please take a look at our other plastic related equipment listings. Will take your surplus equipment in trade. Let us know what you have available! If you would like to talk to me on the machine. Call Dave at 978-669-0060. We will load at no charge, it will ship from Gardner. MA. Machine is sold as is with no warranties expressed or implied. Freight is the responsibility of the buyer. We will help with getting a trucking company if needed. Most any type of collected funds payment is accepted. Thanks for looking& don’t forget to check out our other auctions! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1456cbf530d-0x112-
$
19.99
Buy It Now
$5.5 Shipping
Condition: New
Location: China
$
2,650
Buy It Now
$0 Shipping
Condition: For parts or not working
Location: Scottsburg,IN,USA
$
1,496.25
Buy It Now
Free Shipping
Condition: Used
Location: Providence,RI,USA
$
1,496.25
Buy It Now
Free Shipping
Condition: Used
Location: Providence,RI,USA
$
9.99
Buy It Now
$1.9 Shipping
Condition: New
Location: China
$
9.99
Buy It Now
$1.9 Shipping
Condition: New
Location: China
$
39,500
Buy It Now
Free Shipping
Condition: Used
Location: USA
$
47,500
Buy It Now
Free Shipping
Condition: Used
Location: USA
$
3,700
Buy It Now
$150 Shipping
Condition: Used
Location: Houston,TX,USA
$
2,400
Buy It Now
$150 Shipping
Condition: Used
Location: Houston,TX,USA
$
269.99
Buy It Now
$0 Shipping
Condition: New
Location: Defiance,OH,USA
$
2,000
Buy It Now
Free Shipping
Condition: Used
Location: West Palm Beach,FL,USA
$
4,496.25
Buy It Now
Free Shipping
Condition: Used
Location: Providence,RI,USA
$
218.35
Buy It Now
$0 Shipping
Condition: New
Location: Minooka,IL,USA
$
9.62
Buy It Now
$5.99 Shipping
Condition: New
Location: Minooka,IL,USA
$
639.13
Buy It Now
$0 Shipping
Condition: New
Location: Minooka,IL,USA
$
4.2
Buy It Now
$5.99 Shipping
Condition: New
Location: Minooka,IL,USA
$
9.05
Buy It Now
$5.99 Shipping
Condition: New
Location: Minooka,IL,USA
$
5.35
Buy It Now
$5.99 Shipping
Condition: New
Location: Minooka,IL,USA
$
136
Buy It Now
$0 Shipping
Condition: New
Location: Minooka,IL,USA
$
35.61
Buy It Now
$5.99 Shipping
Condition: New
Location: Minooka,IL,USA
Store Categories. Click to close full size. TEMPCO NHL00102 Band Heater.1 In. Dia.900 Deg F,120V. TEMPCO. Item Specifics. Item. Band Heater. Type. Mica ... moreInsulated Nozzle. Amps. 1.25. Construction. 1 Piece With Low Profile Clamping Strap. Features. Rust Resistant Steel Inside Diameter. SS Outside Diameter. Inside Dia. In. 1. Item. Band Heater. Max. Temp. F) 900. Style. High Temperature. Termination. 10" Lead Wire. Type. Mica Insulated Nozzle. Voltage. 120V. Watt Density(W/Sq.In. 47. Watts. 150. Width(In. 1-1/2. Width Tolerance(In. +/ 1/16. Package Quantity. 1. Shipping A $5 shipping and handling fee is charged on orders totaling less that $50 before tax and shipped to one address within the continental United States. No shipping and handling is charged to customers for standard ground delivery on orders of $50 or more before tax. Shipping Policy Exceptions: Not all products qualify for the above Shipping Policy. Any charges incurred for hazardous materials or other special handling by the carrier must be paid by the customer. Fuel surcharges may be applied. Returns Once your order is placed you will not be able to cancel the order. Once you receive the item. Please contact the Zoro Tools customer service team to obtain a return authorization(RA) number and a free shipping label. If you are not satisfied for any reason products may be returned within 30 days of shipment for a full credit or exchange(provided the product is undamaged) Return documentation should clearly specify credit or exchange. Returned items must be in the original packaging. All returns must include a return authorization(RA) number that can be obtained by contacting our Customer Service Department at 855-BUY-ZORO(855-289-9676) Our customer service hours are Monday through Friday from 7:00 a.m. to 7:00 p.m. CST) About Us We understand the need for small businesses to stay competitive by not paying high prices for the products you need to keep your business running. By offering one price to all customers with no complica
1
 In 

Past Items  
 
vintage(appears 1968) DAVIS MARK III STANDARD MARINE SEXTANT in original box with the"how to" manual plastic discolored. But working condition- standard shipping with delivery confirmation
6 Three Needles Red or Black tube light or heavy weight fabrics Machine include according to Boye's list Davis Rotary Economy Rotary Grant Kensington Lakeside Minnesota K- L New Howe New Stewart Norwood Paragon Standard It is from a Boye display case. It is old stock that has never been used. So virtually it is new item. All items are in great condition. In order to sell another set the tubes might vary slightly. Check out my other items. The picture of the box of needles are for display purpose and not part of this sale. Ask questions if needed. Combined shipping can be done. Shipping is $3.00 includes padded envelope. 7.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw5%7Fos1%3E%3E7-13d363f05c9-0x101-
SICK Anthony Davis Rookie Metal SP Card is made of Metal and very nice in Hand! RARE RC Pefect Metal card for GEM grading hot investment! Perfect Condition Ships World wide
Lot of 3 Standard Cowbell Trolling Fishing Lure 16" Long! the one with the metal fin is a ROY SELF the one with the clear plastic fin is a LUHR JENSEN the one with a red fin is a LES DAVIS Check out my other items! Be sure to add me to your favorites list! Some normal storage wear* Take a look at my other Auctions! WE COMBINE SHIPPING. Wait for Invoice to receive Combined Shipping Discount. Happy Bidding. Thank you for looking! All Items will be insured. I Accept PayPal. Will be shipped with care. Please ask me any questions!
Great M. Davis artwork featured in 1927 Standard Fixtures interior decor ad You are bidding on GREAT M. DAVIS ARTWORK IN 1927 STANDARD FIXTURES AD. This piece measures approximately 10 3/4 by 14 inches. Is in good original condition, ready to be trimmed, matted and framed. ALL PAPER ITEMS ARE GRADED"FINE" UNLESS OTHERWISE NOTED IN ORDER TO FACILITATE FASTER LOADING OF OUR LISTINGS. THE IMAGES OF OUR ITEMS ARE SCANNED AT A LOW RESOLUTION WHICH MAY CAUSE THEM TO APPEAR LESS THAN PERFECT. LOW-RESOLUTION SCANS PRINT VERY POORLY, THUS PREVENTING PIRATING OF OUR IMAGES) THE ACTUAL PAPER ITEMS YOU PURCHASE WILL BE CLEAR AND CRISP. WE DO NOT OFFER ITEMS THAT EXHIBIT ANY TYPE OF DAMAGE UNLESS IT IS SPECIFICALLY NOTED IN THE ITEM DESCRIPTION. WE GUARANTEE YOUR SATISFACTION WITH YOUR PURCHASE. We sell only original Paper Ephemera. Thus you ... morecan be assured that this is an authentic vintage piece. We do not sell modern copies or reproductions. For non-U.S. buyers. We always combine multiple purchases to reduce your shipping costs. Please request an invoice if you make more than one purchase. At The Paper History Company we offer a Full Refund Guarantee for all sales. If for any reason you are less than satisfied with your purchase. Or feel that you cannot leave the highest feedback and detailed seller ratings for your transaction, please contact us immediately before leaving feedback and we will address the issue to your satisfation. Complete Customer Satisfaction is our highest goal. TO ALL BUYERS. THE SMALL PRINT WE SHIP ALL ITEMS VIA U.S. POSTAL SERVICE FIRST CLASS MAIL UNLESS SPECIFIED OTHERWISE. OUR TYPICAL"HANDLING TIME" IS 1 DAY FROM DATE WE RECEIVE YOUR CLEARED PAYMENT. WE SHIP MONDAY THROUGH FRIDAY AT APPROXIMATELY 9:00 AM. SO DEPENDING UPON WHEN YOUR PAYMENT IS RECEIVED, YOUR ITEM MAY SHIP THE SAME DAY IT WAS PURCHASED OR IF A WEEKEND OR HOLIDAY IS INVOLVED, SHIPPING MAY BE AS MANY AS 4 DAYS AFTER YOUR PAYMENT WAS RECEIVED& CLEARED. IN ADDITION. INTERNATIONAL BUYERS- PLEASE NOTE. IMPORT DUTIES
Davis Instruments Hand Held Compass San Leandro. California, USA Built in Night Light ~ Oil Mounted Obtain magnetic bearings on shore or on floating objects Large. Contoured handle and lanyard Excellent Used Condition mk dsk INTERESTED IN MORE THAN ONE ITEM? I will be glad to provide combined shipping at a lower cost to you. Simply let me know that you are still shopping. And I will wait to invoice you until you are finished. PAYMENT: Please pay through PayPal within 3 days of your purchase. Contact me if you wish to pay with a Cashier’s Check. Payment must be mailed ASAP. PACKAGING: I will pack your item with great care. I never assume that a box will be handled gently by any delivery service! SHIPPING: I offer shipping within three business days after your payment. But I ship most items the next day. I strongly encourage USPS Priority Mail ... morefor faster, safer shipment. However, I usually give you an option for a lower cost delivery method when possible. PROBLEM SOLVING: Satisfying customers is a high priority. If you have any problems. Let me know and I will do my best to resolve them. INTERNATIONAL BUYERS: Lighter packages are sometimes offered at a lower priced. First Class International Rate. If you choose this option, the postal service WILL NOT INSURE your item. For quicker service and insurance. Choose Priority Mail. You are responsible for any customs charges or other fees in your country.
12" Wide Killion/Davis Standard Lab Blown Film Line Description: Used 12" Wide Killion/Davis Standard Lab Blown Film Line 1" Killion Davis Standard Extruder. 24:1 L/D Ratio, Air Cooled With 3 Barrel Zones, 3 HP DC Motor, with 15:1 Gear Box Ratio, Eurotherm 2208 Temperature Controllers, 3 Barrel, 4 Die) Amp Meter Per Zone, Solid State Relays, Comes with Dynisco Pressure Gauge, Screw RPM, Melt Temp, and Film FPM Gauge, Barrel Clamp, 2" Die with Air Ring, 1hp Blower, 12" Wide Collapsing Frame, Power Raise and Lower, With Motorized Winders. System is Unitized On A Base with Casters 230/1/60 80 Amp Main Breaker S/N 23041. Stock#7682. Subject to prior sale. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false ... morefalse EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This is used machinery sold“As Is. There are no warranties of any kind. Bidder/Buyer assumes all risks. Is solely responsible for the safe use of this machine and agrees to fully indemnify Arlington. By bidding on this machine, you agree that if you are
USED: Davis Standard Thermatic III. Model 360H II. 3.5" screw diameter, 34:1 L/D ratio, electrically heated, water cooled. 100 hp DC drive thru gearbox, ratio 17.36, rated 161 hp, 1.5 S.F. Unit includes control panel having Barber Coleman controllers. ref# 79900 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
Used- Davis Standard Extruder Gearbox. Model 8'T. Ratio 25.6 to 1. HP rating 300, service factor 1.74, maximum screw speed 66 rpm. 64 gallon oil capacity. Last used with an 8' single screw extruder. ref# 75887 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
USED: Davis Standard 17" single layer IBC extrusion die. Missing top outer ring. ref# 74054 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
USED: Davis Standard 5.75" single layer blown film extrusion die. Mounted on a fixed die cart. 050 gap. ref# 74050 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
Davis Standard Extruder Gear box. Model DS12 HM, Gear rato 12.9:1, 150 rpm output, Excellent condition. Removed from our extruder to change to a 75 rpm screw speed.
Used-Davis Standard 1.5" Single Screw Extruder. Model DS-15, Serial#K5422, SO#01045, Year Built 1988, Electrically Heated, Air Cooled ref# 45119003 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-13efc29ea39-0xf3-
Used-Davis Standard 2.5" Single Screw Extruder Model 25IN25F. Serial#M3908, SO#05568, Built 1991, 4 Zones, Electrically Heated Air Cooled ref# 45119002 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
This listing is for a Davis Instruments Mark 3 Standard Marine Sextant in its Original Box with Manual. Advertisements, etc. The Sextant is in good condition and appears to be unused. The advertisement catalog has a bend in it(to fit in the box) The manual is in good condition. Box shows some wear as shown. All in great condition! Everything pictured is included. Shipping is Calculated for all buyers! I ship WORLDWIDE. Returns are accepted as always if there are any problems. If you buy more than one of my items. I do combine shipping as well- just wait for an invoice from me!
Inventory Number: 04130773576 Manufacturer: Description: 11 HANDSFORD DAVIS KEYSEATER& DUPONT KEYWAY BROACH LOT STANDARD& METRIC Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 11, SIZES AS FOLLOWS: 1/2" D, 1/8" X 16, 4mm X 16, 10mm, 3/8" X 16, 1/16" X 16, 5mm X 16, 1/4" X 16, 3/16" X 16, 1/16" X 16, 5mm X 16, 1/4" X 16, 3/16" X 16, 5mm, 4mm X 16. BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply ... moreus with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money bac
Inventory Number: 04130773531 Manufacturer: Description: 11 HANDSFORD DAVIS KEYSEATER& DUPONT KEYWAY BROACH LOT. STANDARD& METRI Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY 11 PIECE MIXED LOT-AS SHOWN SEE PICTURES, SIZES AS FOLLOWS: 16mm-E-1, 12mm, 18mm-E-1, 16mm X 20, 14mm X 20, 3/4" X 20, 14mm X 20, 1/4" X 3/4" X 20 X 5/16" BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The ... moreinvoice will automatically charge tax and you will need to notify us at time of invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) and invoice multiple purchases every weekend for the prior week. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday. Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we do not issue partial refunds or pay for repairs of damaged items, refunds are issued as money back and we do not offer exchange/replacement
Used- Davis Standard 3-1/2" Screw. 24 to 1 L/D ratio. ref# 41592022 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
STANDARD BENCH MODEL 1" KILLION/DAVIS EXTRUDER ELECTRICALLY HEATED. 24:1 LD BARREL RATIO 3 HP DC MOTOR. SCR DRIVE REDUCER RATIO: 1 5:1 MAX. SCREW RPM: 120 AMBIENT COOLED BARREL LIQUID COOLED FEED THROAT CONTROL PANEL: DIGITAL TEMPERATURE CONTROLLERS. 3 BARREL. 1 ACCESSORY ZONE HOPPER SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; ... morecustomer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
2" STANDARD PLASTIC EXTRUDER BY STERLING/DAVIS 20 HP VARIABLE SPEED U SVD BARREL: ELECTRICALLY HEATED. AMBIENT COOLING, VENTED, 24:1 LD RATIO REDUCER: 11:1 LIQUID COOLED FEED THROAT CONTROL PANEL: ANALOG TEMPERATURE CONTROLLERS. 4 BARREL. 2 ACCESSORY ZONES EIGHT HOLE STRAND DIE MOUNTED AND WIRED 2" SCREEN CHANGER MOUNTED AND WIRED WITH HYDRAULIC UNIT SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard ... moreskid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
2.5" STANDARD PLASTIC EXTRUDER BY STERLING/DAVIS 30 HP VARIABLE SPEED U SVD WITH ELE CTRIC REMOTE SPEED CONTROL BARREL: ELECTRICALLY HEATED. VENTED, AIR COOLED, 30:1 LD RATIO LIQUID COOLED FEED THROAT CONTROL PANEL: DIGITAL TEMPERATURE CONTROLLERS. 5 BARREL. 1 ACCESSORY ZONE EIGHT HOLE STRAND DIE MOUNTED AND WIRED REBUILT BY BERLYN SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; ... morebeyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
Click To Enlarge- Used-Davis Standard Gearbox Model 350H 11. Horsepower Capacity 161. Gear Ratio 17.36:1.85 rpm S.F. of 1.5 ref# 409126. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold ... moreare FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
READY FOR SALE IS THIS VINTAGE DAVIS MARK III STANDARD MARINE SEXTANT THAT IS BY THE DAVIS INSTRUMENTS CORPORATION 857 THORTON STREET SANLEANDRO CALIFORNIA. 94577 U.S.A. THE COVER OF THE BOOK THAT WILL BE COMING WITH IT SAYS"HOM TO FIND YOUR POSITION WITH A SEXTANT. I'M ALMOST 100% THAT IT WAS NEVER USED, BUT IF IT WAS IT WAS A VERY LONG TIME AGO CAUSE IT HAS BEEN IN MY COLLECTIBLES STORAGE FOR AT LEAST 35+ YERAS. THE BOX IS THE ORIGINAL BOX& BESIDES FROM A FEW PEN OR PENCIL MARKS ON THE LID IT TOO IS IN EXCELLENT CONDITION. WHEN I SHIP THIS IT WILL BE WRAPPED IN BUBBLE WRAP& BROWN PAPER CAUSE IT IS A REALLY WELL MADE BOX! IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TOO ASK ME& I HOPE YOU HAVE A WONDERFUL DAY! INTERNATIONAL BUYERS PLEASE NOTE THAT IF I CHARGE FOR EXAMPLE $40.00 FOR THE SHIPPING& IT COST ME $22.75 TOO ... moreSHIP IT TOO YOU, I WILL GLADLY REFUND YOU THE $17.25 FROM THE SHIPPING AMOUNT DIFFERENCE. IT NEEDS TOO BE HIGHER AT SOMETIMES CAUSE WHAT IT COST ALOT MORE TO SHIP TO AUSTRALIA OR GERMANY THAN WHAT IT WOULD COST TO SHIP TOO CANADA OR MEXICO. I NEVER INTEND TO MAKE MONEY ON THE SHIPPING AMOUNT!
Click To Enlarge- Used- Davis-Standard Sheet Line with 66" wide x 18" diameter three roll vertical stack. Cored rolls with rotary unions, 2 hp dc drive motor, pneumatically adjustable first and third rolls, temperature distribution system with heat exchangers, pumps and controls, 84" long cooling conveyor section, Advanz/SRL gauge, type PMC-T, serial# 0140, 66" wide x 8" diameter pull roll stand with pneumatically adjustable top roll driven by 2 hp motor drive with controls. ref# 43569010. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. ... moreBase shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Used- Davis Standard 3-1/2' Single Screw Extruder. Model 3.5MV-350. 30 to 1 L/D ratio. Electrically heated, air cooled, 5 zone barrel. Water cooled feed throat, no hopper. Driven by a 60 hp, 3/60/460 volt motor thru a gearbox, ratio 17.4 to 1. Includes a variable speed inverter, a C clamp, and a control panel with Eurotherm model 2208 digital temperature controls. Requires screw. Built 2000. ref# 41592002. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight ... morecarrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Used- NRM Davis Standard 3-1/2" Diameter Single Screw Extruder. 24 to 1 L/D ratio. Electrically heated. Water cooled, jacketed barrel section. 24.89:1 gearbox ratio, 100 hp DC motor with SCR, control panel with 4 barrel, 5 die zones with temperature controllers, water circulation system with pump, serial#19364, SO#64696. ref# 86642. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping ... moreestimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Used- Davis Standard 7” Wide Sheet Line consisting of: 1) Davis Standard 1-1/4” pedestal mounted single screw rxtruder. Model DSPW-125V-H24, serial#V9991, SO#61592, built 1998. Approximate 24 to 1 L/D ratio. Electrically heated, water cooled 3 zone non-vented barrel with a closed loop water system, with pump, tank, and heat exchanger. Adjustable centerline height, water cooled feed throat with hopper. Driven by a 5 hp, 180 volt, 1750 rpm DC motor thru an Ex-Cell-O cone drive, ratio 15 to 1. Includes a control panel with Eurotherm controllers, Reliance FlexPak Plus VS drive, and a 6 kva transformer. 1) 7” Wide sheet die, 1) Davis Standard 3 roll sheet stack, with(2) 5” diameter x 10” wide chrome plated cored rolls, 1) 5” diameter x 10” wide cored rubber roll, 2) pull rolls, 1) chrome, 1) rubber, all driven by a 1 hp, 180 volt DC gear motor. ... moreIncludes a Mokon temperature controller, model MM4H04-01, serial#63036, rated 4 kw, maximum temperature 250 degrees F. Mounted on a cart. ref# 44517001 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
This scale is an upright scale. It is in great condition. It has on it a model number of sorts n No27383 as seen in the picture. This scale will not be shipped- must be picked up at location.
Click To Enlarge- Used- Davis Standard L Style 4 Roll Sheet Stack. Serial# 07745. 2) 18" Diameter x 94" wide vertical rolls. With smooth chrome rolls, 2) horizontal chrome rolls. Includes a cooling system. ref# 42396036. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for ... moreother payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Click To Enlarge- Used- NRM/Davis Standard 3-1/2" Single Screw Extruder. Model 3.5 PM III. Approximate 32 to 1 L/D ratio. Electrically heated, water cooled non-vented barrel, no screw. Includes a pump, tank, and heat exchanger. Water cooled feed throat, no hopper. Driven by a 50 hp, 300 volt, 850/1020 rpm motor thru a gearbox, ratio 24.89 to 1, approximate 42' centerline height. Includes a Key Filters hydraulic screen changer, model KTB 2.5, with a 2 hp hydraulic power pack, and a control panel with an Allen-Bradley Panelview 1200, and a Reliance VS power drive. Eurotherm 2208 controllers and a Reliance drive. Mounted on a common base. ref# 42133001. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's ... morepayment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Click To Enlarge- Used- Davis Standard Model 100MM35F. 3.9' 100MM) Screw Diameter, 30: L/D Ratio, Electrically Heated, Water Cooled Barrel. 125HP DC Drive thru 17.44:1 Gearbox Ratio. No Controls ref# 41715009. Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. ... moreA 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Click To Enlarge- Used- Davis Standard Thermatic Extruder. Model 80IN4 5T, Serial#BJ692, Manufactured 10/2006. Hinged die support, rod die assembly, and temperature controller; 200 hp, 1750 rpm AC variable frequency drive. ref# 45009001 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for ... moreeach item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Click To Enlarge- Used- 44" Wide Davis Standard Sheet Extrusion Line including the following: 4.5" Davis Standard 30:1 L/D non-vented extruder driven by 300 hp DC motor with Allen Bradley model 1397 drive. 230/460 Volt AC input. Has 17.3:1 gear reduction rated at 304 hp and 100 rpm output. Serial#R0199, model 45IN45HT. 1.55 service factor, new 1994. Has electrically heated, water cooled barrel with 58" centerline height. Extruder includes Allen Bradley touch screen interface for extruder heat control and operation. Includes 4.5" Beringer screen changer with hydraulic pump. Has 15 hp melt pump, model LS56/56. Downstream includes Davis Standard 44" wide x 12" x 18" x 18" gear driven chill roll stack, SO#52517, serial#R0210. New 1994. Each roll equipped with rotary union, hydraulic clamping action on rolls ... moreincluding hydraulic pump. Includes operator controls with drives for chill rolls and pull rolls, includes temperature control system with pumps and heaters for chill rolls. ref# 44882004 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundab
Click To Enlarge- Used- Davis Standard 46” Three Roll Vertical Roll Stand Sheet Line with(1) 12" diameter x 46" roll face. 2) 18" diameter x 46" roll faced rolls, chromed, cored with rotary unions, individually driven rolls with 3 hp, 230/460 volt motors, hydraulically adjusted top and bottom rolls with 7.5 hp hydraulic power pack, temperature control skid with cooling conveyor, pumps and heat exchangers, 8' diameter x 46" faced rubber pull roll assembly driven by 3 hp, 230/460 volt motor drive, NDC systems thickness gauge, Allen Bradley Panel View 550 operator interface touch screen, 44" wide EDI flexlip sheet die, model UltraFlex H-100, flexible upper lip, removable lower lip, back center feed, serial#98-20484, Vulvan single turret two position winder, model TWQ422, 52" wide, 3" cores, up to 24" ... moreroll diameter, serial#98263, Davis Standard SO#63831, serial#X9486, new 1999. ref# 44640001 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Check
Click To Enlarge- Used- Davis Standard Gemini Parallel 94mm Counter-Rotating Twin Screw Extruder. Model GP-94MM. Approximate 28 to 1 L/D ratio. 5 zone non-vented barrel, electrically heated, air cooled. Feed section, no hopper. Approximate 41-1/2” centerline height. Driven by an approximate 75 hp DC motor thru a Thyssen type TPM3-94-D0S-28 reducer, ratio 28 to 1. Includes a operator panel, and a control panel with a Reliance Flex-Pak 3000 drive. ref# 43575001 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. ... moreIl. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Click To Enlarge- Used-8" DAVIS STANDARD WATER RING PELLETIZING/RECLAIM LINE CONSISTING OF THE FOLLOWING: 8" 34/1 L/D SIDE VENTED DAVIS STANDARD EXTRUDER. HAS ELECTRICALLY HEATED WATER COOLED BARREL UTILIZING CAST ALUMINUM HEATERS. EXTRUDER IS EQUIPPED WITH 500 HP DC MOTOR WITH SCR CONTROLLER. DIRECTED CONNECTED TO FARREL GEARBOX MODEL FD44, WITH 740 HP CATALOG RATING, 400 HP SERVICE RATING AT 1710 RPM INPUT WITH 1.87 SERVICE FACTOR. HAS 25.563/1 GEAR RATIO. EXTRUDER IS EQUIPPED WITH TEMPERTURE CONTROL PANEL, TOUCH SCREEN OPERATOR CONTROL PANEL, AND DYNiSCO ULTRA LOCK SLIDE PLATE SCREEN CHANGER SERIAL#U81046. NEW 12/2003. NO HYDRAULIC PUMP INCLUDED. DOWNSTREAM INCLUDES DYNISCO MODEL 35S 3 HP WATER RING PELLETIZER INCLUDING SLUSHWAY, OPERATOR CONTROL PANEL AND THE SPIN DRYER ref# 45276001 Contact Information Steven Cohen Aaron Equipment ... moreCompany 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
3.5" Davis Standard Extruder. 24:1 LD, 100 hp Description: Used Davis Standard Extruder. 24:1 L/D ratio, 100 HP DC Drive, 100HP Motor, with control panel. 5 Barrel, 8 Die Zones(Barber Coleman AT580, ATplus, 2 new Omron) water cooled barrel with closed loop system. Stock#5635. Subject to Prior Sale. Buyer is responsible for setting up shipping.
Used extrusion screws in great shape. Very little wear. As-is take your pick $400 each. If you buy more than one then you get discounts. If you want to buy more than one we can give you better pricing. If you want them rebuilt we can do that price of the screw rebuilt is $1900 each. Paypal is accepted at an additional%10 of list price. Check out our website If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com References are available upon request. We are a small company but offer the highest quality and best customer service. My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time.
Click To Enlarge- Used- Davis Standard 3” Single Screw Extruder. Model DS-30. Approximate 24 to 1 L/D Ratio. Electrically heated, air cooled 4 zone non-vented barrel. Water cooled feed throat with hopper. Driven by a 40hp, 500 volt, 1150/2000 rpm DC motor thru a gear box, ratio 7.42 to 1. Approximate 26-1/2” centerline height. Includes a control panel with a Spectrum drive, Barber-Colman temperature controllers, and a transformer. Mounted on a common base. Serial# J-6473, SO# 97962, built 1985. ref# 45076008 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment ... moreinstructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Click To Enlarge- Used- 6" Davis Standard Sheet Line consisting of the following: 6" Davis Standard 30:1. Water Cooled Extruder, Model 6004. S.O. 47594C, 400 hp with a 4.5" Berringer Screen Changer& Melt Pump. ref# 45256004 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep ... morefor each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Click To Enlarge- Used- Davis Standard 1" Single Screw Extruder. Model DS-10-HM. No Screw. Approximate 24 to 1 L/D ratio, electrically heated, air cooled 3 zone non-vented barrel, 1) barrel blower missing. Water cooled feed throat no hopper. Approximate 44" center line height. Requires a motor, includes a gearbox, ratio 12. 8 to 1. No control panel. Serial# P6737, SO# 51767, built 1994. Mounted on common base with casters. ref# 45271007 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location ... moreunless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
INGALLS PROCESS EQUIPMENT COMPANY MORE THAN JUST INDUSTRIAL EQUIPMENT Davis Standard Extruder. 1.5" 7.5 hp. Model 15-T Stock# 1207 Specifications» one(1) used 1.5" dia. Davis Standard Extruder. Model 15-T. Serial no. E-1204, S.O. 16971-C. 1.5" dia. screw. 24:1 L/D, electrically heated barrel. 3 barrel zones, air cooled barrel. 2 die zones. 2 adaptor zones. With complete control panel. Driven by a 7.5 hp oilgear hydraulic drive. Equipped with a 7" wide sheet die. Equipped with stainless steel hopper, Payment and Shipping Terms We accept the following types of payment: PayPal. Bankwire Transfer, Company Check, Cashier's Check Items sold to vendors in Ohio are subject to Ohio Sales Tax Please be aware- we DO NOT accept personal checks or direct payments from all credit cards We MUST verify that all checks have cleared ... moreour bank prior to any merchandise being shipped All items are F.O.B. Painesville. OH All items offered are subject to prior sale or other disposition All payments must be received within 10 days of purchase or auction. Unless other arrangements have been made If we have not recevied payment within 10 days. Buyer will be reported to eBay and the item will be relisted. SHIPPING- Units will be loaded on a flat bed truck or banded to a standard pallet CRATING WILL BE CHARGED PER ITEM- not all items will require crating costs ALL ITEMS ARE SOLD AS IS We will run items prior to sale. When possible, at the request of the customer. Please ask us any questions you may have prior to sale. Always feel free to contact us direct at the contact information listed above. Ingalls Equipment WILL NOT pay shipping for any items listed. If you would like us to obtain a freight rate for you, please contact us and we would be happy to do so. If you would like any additional photos or description we can provide those at request. Ingalls Process Equipment Company is a buyer and seller of used process equipment for the plastic. Chemical and allied industries. We have been in business since 1995 an
ref# 45295- Click To Enlarge- Used-2-1/2" Davis Standard Single Screw Extruder ref# 45295002 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please ... moreadvise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1415af1a392-0xf6-
Click To Enlarge- Used- Davis Standard Cast Film Downstream Serial Number P-3232. 3) 30” diameter x 18” wide Chrome Rolls driven by 2 hp, 200 volts, 1750 rpm motor with Winsmith gearbox 17.70 to 1 ratio. S.O. number 51737, Built 1994. 1) Davis Standard pull roll with(2) 30” wide x 8” diameter plastic rolls driven by 2 hp, 200 volts, 1750 rpm motor with Winsmith gearbox 17.70:1 ratio. ref# 45219002 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject ... moreto prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Click To Enlarge- Used- Davis Standard 6” Thermatic Single Screw Extruder. Model 600S. Approximate 24 to 1 L/D ratio. Electrically heated, water cooled 5 zone non-vented barrel, no cooling system. Water cooled feed throat, no hopper. Approximate 42” centerline height. Includes a gearbox, ratio 17.21 to 1, and a die clamp. No motor, or controls. Serial# D7376, SO# 44302C. ref# 45256001 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior ... moresale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Click To Enlarge- Used- Davis Standard 79” Wide Winder. Single turret. 4) station. Approximate 60” diameter roll capacity. 4) Speeds, minimum feet per minute 15, maximum 125. Serial# 8125. ref# 45256032 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item description or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please ... morecall for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Click To Enlarge- Used- Davis Standard 2" Single Screw Extruder. Model KND250. Approximate 30 to 1 L/D ratio. Electrically heated, air cooled 5 zone non-vented barrel. Water cooled feed throat, no hopper. Driven by a 40hp, 3/60/230/460 volt, 1770/2642 rpm motor thru a gearbox, ratio 17.26 to 1. Approximate 76" centerline height. Includes a Dynisco hydraulic screen changer, model EH-25, serial# EH-25533, 1) 2hp power pack, and an extruder control panel with Eurotherm controllers, and an Allen-Bradley Impact drive. Mounted on a common frame. Serial# AX454, SO# 79288, built 2004. ref# 45256023 Contact Information Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780 Item location: Bensenville. Illinois, United States. Services available: Freight- Check the item ... moredescription or contact the seller for details. Ships to: United States. Seller's payment instructions All items sold are FOB Bensenville. Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy: Items paid in full price have a 1 week right of return. 100% refundable, customer pays all freight– unless negociated differently. Payment Details: Company Checks. Wire Transfers, Purchase Orders, Visa/MasterCard, Amex
Automated Manufacturing Systems 514 14th Street West Palm Beach FL 33401 561 386 8561 Davis Standard Swing Arm Excellent Condition $1200 Terms: Payment in full prior to shipment If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com References are available upon request. We are a small company but offer the highest quality and best customer service. My name is Brandon and my cell# is 561-386-8561. My email is rbbell@unh.edu. Feel free to call or email any time. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2Bb41%3E-141a36a1424-0xfe-
Davis Standard 3.5" Single Screw Extruder, 75 H.P. AC Motor with drive Air Cooled 24/1 LD Ratio Contact C.J. 813-719-8134
DAVIS STANDARD! Small melt pump Model: 22/13. This is a very nice unit in good condition. Single Phase 240 Volts Good for up to 2" extruder or small twin screw. Excellent for lab machine or small production line Comes with motor. Gearbox, heaters and thermocouples, no controls. This would be excellent for a lab extruder or production extrusion setup. Has all heaters and inlet/ outlet flanges. Comes mounted to an adjustable height stand. Or can be easily removed. You can't buy a DAVIS STANDARD anything for this price! I have only one of these. So buy it now. Keywords Extrusion. Lab processing, rheology rheometer, NRM, RDN, Gatto, Conair, Brabender, Haake, profile, pelletizing, compounding, film, sheet, tubing, LCI, Maag, Zenith, twinscrew, WP, Leistritz, maris, conair, gear pump, Buyer pays actual shipping from 33023 or pick up for ... morefree. I will properly palletize and cover for free- no BS handling charges.
Davis Instrument Corp. Mark 3 Standard Marine Sextant in the original box with instruction manual. This is gently used. The box shows age and wear and the instruction manual is wrinkled and has a stain on the front. Comes with original plastic bag and many other papers from The Davis Corp. The manual has a date of 1967,1968 on the cover, some of the other paperwork says 1971 and 1973, so I'm not certain as to the exact year this is from, the box and sextant are not marked with a year.
BETOL/DAVIS STANDARD TWIN SCREW CO-ROTATING PLASTIC EXTRUDER 45MM SCREWS CO-ROTATING 41:1 LD RATIO 25 HP DC MOTOR and SCR VENTED ELECTRICALLY HEATED. LIQUID COOLING FULL CONTROL PANEL with SIX(6) BARREL ZONES and FOUR(4) ACCESSORY ZONES APPROX 400 RPM MAX. SCREW SPEED FOURTEEN(14) HOLE STRAND DIE MOUNTED and WIRED BARREL and SCREWS IN GOOD CONDITION GEARBOX MAKING NOISE SHUT-DOWN IN RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any particular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage ... morefee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
Davis Standard 2 1/2" Extruder 24/1 LD Ratio Air cooled. 4 heat zones. 30 HP AC Motor with drive Has partial heat control cabinet. controllers missing) Screw wear condition unknown. Contact C.J. 813-719-8134 Prefer no pay-pal FOB/ local pick up Used equipment. Sold in as is condition.
HERES A NICE USED DAVIS STANDARD PIECE OF EQUIPMENT THAT HAS TWO PARTS WITH IT.THERE IS A GUIDE SHEAVE AND AN AIR WIPER.WE ARE SORRY TO SAY WE CANNOT GIVE YOU MORE INFORMATION BUT WE ARE NOT FAMILIER WITH THESE TYPE OF ITEMS,IT APPEARS THAT THESE HAVE SOMETHING TO DO WITH PLASTIC EXTRUDING OR WIRE,IF YOU HAVE SPECIFIC QUESTIONS,WE WILL NEED YOU TO CALL US AT 612-302-9469 AND WALK US THROUGH YOUR NEEDS,WE WILL SECURE AND WRAP THIS ITEM TO 48 X 48 INCH SKID WITH AN ESTIMATED WEIGHT OF 700 LBS READY FOR SHIPPING.NO FREE SHIPPING AND FREIGHT QUOTES CAN BE OBTAINED BY CALLING THE PERSON LISTED BELOW AS WE CANNOT GIVE THEM. GLOBAL SURPLUS Our items are sold strictly as-is. Untested. Unless otherwise noted in the description. Even on tested items, we cannot offer any guarantee or warranty. We do not accept returns or issue refunds. However, if you ... moredo happen to experience a problem with your item, please contact us immediately. We are a small company that can work with you to immediately address your issue. No automated phone system here! You can ALWAYS pick your item up at our warehouse instead of having to freight or ship it! IMPORTANT-SHIPPING POLICY- IMPORTANT! If your item is large/heavy enough to warrant freighting. That's how it must leave our warehouse, unless you pick it up yourself. Freight can be expensive sometimes, especially on very large and heavy items: IF you have a PROBLEM spending the money required to ship your item, DO NOT BID! We cannot offer you any better rates than what you can obtain yourself. For freight inquiries. You can contact Scott Cyrus at UTI Transport Solutions located in Silverado, CA. Tel: 714-710-9078 or Scyrus(AT)go2uti(DOT)com- PLEASE NOTE that you will have to remove the parentheses and make the AT and DOT into the respective symbols when you try to reach him. We will box. Wrap, and/or palletize and load from our dock for free! FOB: Mpls. MN 55411 Dock Time is 8:30 AM- 2:30 PM CST Stop in or contact us to see thousands of other pieces of surplus equipment! 612-302-
Davis Standard 3.5 inch 24:1 extruder with general purpose screw. 75 hp dc motor with digital controls model 35vt 1739:1 gear reduction operational
1975 DAVIS INSTRUMENTS STANDARD MARK 3 MARINE SEXTANT IN ORIGINAL BOX. Made in the U.S.A. Great condition. Box shows wear and age.
3.5" DAVIS STANDARD HEAVY DUTY PLASTIC EXTRUDER MODEL: 35IN35H 150 HP AC VECTOR MOTOR and DRIVE ELECTRICALLY HEATED and VENTED with VACUUM PUMP 30:1 LD BARREL RATIO REDUCER RATIO: 17:1 MAX. SCREW RPM: 115 AIR COOLED BARREL LIQUID COOLED FEED THROAT CONTROL PANEL: EUROTHERM 2208 TEMPERATURE CONTROLLERS. 4 BARREL, 3 ACCESSORY ZONES, PRESSURE, STOCK TEMP XALOY 3.5" SLIDE PLATE HYDRAULIC SCREEN CHANGER. WIRED and MOUNTED with HYDRAULIC PAK 8 HOLE STRAND DIE MOUNTED and WIRED NEW: 2000 MAX RATE: APPROX. 550 LBS.HOUR SHUT-DOWN IN VERY GOOD RUNNING CONDITION SUBJECT TO PRIOR SALE Equipment is sold AS IS. WHERE IS and WITH ALL FAULTS and we make no warranties of any kind, expressed or implied, in respect to the equipment, whether new, used, reconditioned or rebuilt and in particular make no warranty of merchantability or fitness for any ... moreparticular purpose. Information is deemed accurate but is not guaranteed. STORAGE FEE/ABANDONMENT: After 20 days from purchase date we charge a $10 per day storage fee per standard skid/pallet footprint; beyond 30 days it is considered abandoned; customer forfeits the rights to the item/items. No refunds given. There will be no exceptions Any questions? CHARLES HUTCHEON HUTCHEON. INC. T: 631-754-3835
Davis Standard 2 ½” 32 to 1 Plastic Extruder This is a used machine taken from closed factory. Said to have been running when taken down. There is a 40 HP DC motor but no panel or DC drive. This should be considered a core Priced to sell quick. Sold as is where is I have no way to test. Shipping Your Truck Will/Call I can load with forklift. We take Pay-Pal Please Please see our store thank you cimsales
The Davis Mark III Standard Marine Sextant Excellent Overall Condition: As pictures show. Box shows normal wear and is torn on the top. Instrument itself is in excellent condition. 2008 instruction booklet included Please see pictures for details of the EXCELLENT gently used condition. ~I am happy to answer any questions
VINTAGE cr1960s PHOTO CHROME POSTCARD from DAVIS MOUNTAIN STATION'S RESTAURANT. MOTEL& STANDARD OIL GAS STATION at JUNCTION of US HWY 80-290. In GOOD CONDITION. Powered by The free listing tool. List your items fast and easy and manage your active items.
this is a used extruder in very good conditionwith a 40 hp motor.4 barrels zone,air cooled,3 dies zone,amp meter,rpm gauge,belt driven.weight 5500 lbs
NEGRO SUFFRAGE JEFFERSON DAVIS COLORPHOBIA FREEDMEN BUREAU ANTI SLAVERY STANDARD, NEGRO SUFFRAGE JEFFERSON DAVIS COLORPHOBIA FREEDMEN BUREAU ANTI SLAVERY STANDARD National Anti-Slavery Standard. August 18, 1866, New York. This newspaper was the official newspaper of the American Anti-Slavery Society and features many articles from influential abolitionists concerning general liberty and the emancipation of slavery in the United States. This rare Anti-Slavery newspaper was published from June 1840 through April of 1870 and is a treasure trove of historic reconstruction and emancipation and freedmen news and articles. This issue is original and complete as issued. 4 pages, and in very good condition still attached at the spine and is guaranteed to be as described. It was printed on a heavy rag/cotton paper thus it is not at all brittle to the ... moretouch! An excellent opportunity for the historian. Researcher, collector or investor! I have provided Antique Engravings. Prints, Maps& Newspapers globally to museums. Institutions, art dealers, researchers, genealogists, movie sets, interior designers, curators, authors, knowledgeable collectors and beginners too. The comments buyers have made in my"feedback" file are an indication of the quality product and exceptional service I deliver. Authenticity of all items. As described in each listing, and the accuracy of that description, is guaranteed unconditionally. Shipping will be $4.50. International airmail shipping will be $13. All items will be shipped in a acid free archival poly bag and securely packaged in a sturdy reusable flat or mailing tube to assure safe delivery. I will combine multiple purchases for just one shipping charge. Feedback will be left on all transactions and I would appreciate you doing the same. Payment must be received no later than 10 days through PayPal. I have had very few inquiries for item returns. In the event of such a request. The transaction will be evaluated and a refund offered if the item differs substantially from the descr
Davis Standard Used Date-10-17-94 HS 299664 Plug- Peripheral Equipment CLass 2 Model-WN113 Inpur-120VAC 60HZ 22W Output- +5VDC 860MA +12VDC 300MA-12VDC 300MA Weight-7LBS Dimensions-L20"xH14"xW10" As is Question please call 517-294-8737 Check out my! Shipping Item is located in Howell Michigan. Great pick up item. For shipping please use the UPS calculator. Buyer pays all shipping expenses. Thank you. Return Poicy Within 14 days after recieving this item and if you believe that I misrepresented it. Please email me to set up a return. All return postage or freight will be payed by the buyer and it must be returned in the same condition that it was shipped. Thank You Liability Seller makes no claims as to the equipments compliance to Starlight Supply Inc. Or any other safety standard, and is held harmless regarding any cost resulting ... morefrom non-compliance. The seller and its agents are to be held harmless for any personal injury or property damage resulting from the handling or use of this equipment or items. It is the buyer's responsibility to inspect or otherwise verify safety standards relating to this equipment. It is the buyer's responsibility as to the safe handling and operation of this equipment or items. Be sure to add me to your!
A utomated M anufacturing S ystems www.ams-plasticextrusions.com Davis Standard 1" Inch 24 to 1 Extruder. Great Extruder- Used with new electrical controls(panel being finished by AMS now! 1. QTY(3) HEAT/COOL barrel zones. QTY(2) HEAT/ONLY die zones, including solid state relays, fuse protection and associated wiring and thermocouples. NEW Can add up to(3) HEAT ONLY Die zones, just ask! 2. Motor STOP/START station. With Screw RPM and ten turn potentiometer. NEW. 3. 3 HP AC Motor. NEW. 4. 3 HP AC Motor Control. NEW. 5. QTY(3) Barrel Blowers for Cooling. NEW. 6. Standard Heaters. NEW. Mechanical Specifications and Hardware include the Following: 1. 24 to 1 Bi-metallic Barrel(lab barrel. Used excellent, large feed throat) 2. Handy Clamp Die Clamp. Heated, NEW. 3. 24 to 1 Screw. New Stainless Steel, general purpose. NEW. 4. Stainless Steel ... moreHopper Approximately 10-15 LBS. NEW. 6. Machine to be geared 0-120 Screw RPM. 7. 9.500 PSI Rupture Disc. 8. Frame Mounted Control Panel. 9. High Temperature Insulation and Barrel Cover. NEW. 10. Machine has all new electrical controls and instruments. MACHINE IS LIKE NEW. 11. Integrated barrel feedsection. Very large to insure very good material feeding. Call for more specifications. 561 386 8561 Paypal is NOT accepted. We are not a broker. We are a small extrusion company. We currently specialize in production of new extrusion equipment of our own design. If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time.
Vintage. Could use a good cleaning. or dip in the lake! This is for both! No international shipping. Sorry.
Davis Standard 2.5" Screw Rebuilt Barrier Screw with Chrome Platting If you are in need of a Davis Standard Screw. This is a great deal. If you have any additional needs. We can probably take care of them. From drives, motors, and electronics equipment to full extrusion lines we have what you need. Check out our website www.ams-plasticextrusions.com My name is Brandon and my cell# is 561-386-8561. My email is Feel free to call or email any time.
Item Extruder Cold Feed Davis Standard 4 1/2" 90mm 4.5" Cold Feed 20:1. One(1) Used Davis Standard 4.5” 120mm 4 1/2" Cold Feed Rubber Extruder. 20:1 L/D, 150hp 1750/2000rpm 500v motor, 17.36:1 gearbox ratio, date 11/88, Serial No. K7439, Order No. 01718 Shipping Terms: Ex works- Ohio. USA Payment Terms: Net Prior to shipping Delivery Time: Stock/ Immediate Please advise if you have any questions or would like to schedule an inspection. Soberay& Sons. Ltd. Rubber Machinery Experts http:www.soberaysons.com, Inventory on Website, Phone: 216-334-2003, Fax: 216-334-2005, 5500 Walworth Ave. Cleveland. Ohio 44102, United States,
Davis Standard Thick Sheet Die Will extrude plastic sheet up to 1/2 X 97 inch. Has removable lower lips to make thicker sheet. Adjustable top lips& adjustable restrictor bar. Die was rebuilt about 6 years ago. Excellent condition.
Used Davis-Standard 6" Extruder Model: Thermatic 60T Extruder Dims: 195" x 42" x 67" Appx. 15k lbs. Generator Dims: 118" x 40" x 45" Appx. 6k lbs. 250HP. 1780 RPM, 440V motor 8" x 8" inlet 6"Dia outlet Last running at a plastic recycling plant Pressure lubrication on gearbox Unit includes 15-day right of return This extruder was last running recycled plastics. Freedom Equipment has helped hundreds of customers with their pelleting applications. If you have any questions or need any assistance Call 815-226-9150 or email robert@freedomequipment.com Freedom Equipment Specializes in: Pellet Mills. Pellet Mill Plants, Pellet Coolers, Screeners. Shakers, Sifters, Grain Cleaners Dehydrators. Dryers and Drying Systems. Hammermills. Hogs/Chippers/Grinders, Crumblers. Flakers and Roller Mills. Packaging. ... moreProcessing and Plant Machinery. Available from Freedom Equipment: Equipment Appraisals. Liquidations, Equipment Rebuilding Services, Onsite Repair Service, Installation Services, Consulting Services, as well as quality New, Used, and Reconditioned Machinery. Industry Experience: General Feed. Aquaculture, Wood Pellet and Biomass Pellets, Organic and Inorganic Fertilizers, Plastics, Food Packaging and Processing, Pet Food, Pharmaceutical, and Chemical Industries. F R E E D O M E Q U I P M E N T Pelleting. Packaging, Processing& Plant Machinery Customer has a 14 day right of return for the full purchase price of the machine if not fully satisfied with this machine. Customer is responsible for all crating costs. And shipping charges both ways. Item must be received within 14 days from the time the unit is delivered. All invoices not paid within 10 days may be canceled without notice. 2093C
HERES TWO PIECES OF DAVIS STANDARD WIRE PROCESSING EQUIPMENT.ONE IS A GUIDE SHEAVE TYPE AND THE OTHER IS A AIR WIPER TYPE.THESE CAME TO US WITH A LOT OF OTHER SURPLUS MACHINERY,SORRY FOR THE LACK OF INFORMATION BUT WE DO NOT HAVE A CLUE WHAT THESE DO,HEY THAT RIMES,WE WILL SECURE AND WRAP THESE TO 48 X 48 INCH SKID WEIGHING 550LBS READY FOR SHIPPING,NO FREE SHIPPING AND FREIGHT QUOTES CAN BE OBTAINED BY CALLING THE PERSON LISTED BELOW AS WE CANNOT GIVE THEM. GLOBAL SURPLUS. STOP IN AT THE GLOBAL SURPLUS STORE BETWEEN THE HOURS OF 8:00 AM TO 3:00 PM MONDAY THRU FRIDAY AND LOOK AT MANY SURPLUS ITEMS.FEW NEW BUT MANY AT COST SAVING USED PRICES,FOR FREIGHT QUOTES,YOU CAN USE WHOEVER YOU LIKE,WE USE SCOTT CYRUS AT UTI AND HE CAN BE REACHED AT 714-710-9078,HE GIVES GOOD FREIGHT RATES TO ANYWHERE YOU WANT TO SHIP,WE DO NOT RECIEVE ANY BETTER QUOTES ... moreTHAN YOU CAN THEREFORE,WE ASK YOU TO CALL DIRECT,THANK YOU.
20 page. 12"X 8" old magazine of the South. February, 1961. Great history, pictures, monuments of the Confederacy, Jefferson Davis, Abe Lincoln and South in general. Compliments of Standard Oil. No tears or marks. Good condition.
This is a functioning navigational sextant. Only slightly used. Made of stout black plastic by Davis Instruments of Hayward, CA. Comes with box(marked with year of purchase) and instructions. An interesting tool for anyone who wants to understand how seamen and explorers navigated before the GPS era. PayPal ONLY PLEASE. The quicker you settle. The quicker I'll ship. I calculate shipping based on distant destinations, but will refund excess shipping. I welcome international buyers, and if possible will ship insured via the US Postal Service International Priority. I will declare the sale price and the nature of the item to Customs. If an international shipment is delayed, check the tracking number with your country’s Customs. To ensure your complete satisfaction, examine photos and descriptions carefully-I'm happy to answer your questions. ... moreReturns can’t be accepted if item has been worn, marked, damaged, or manipulated. Feedback will be shared when it's received. Thanks for looking!
Used NRM/Davis Standard PM III Extruder 4.5" 32 to 1 L/D Water cooled Vented Eurotherm 2208 Controllers-8 Heating Zones. Flange, Adapter and 2 Die Zones 100 HP DC Motor Vary Speed Power Module 25.14 to 1 Gear Ratio 1999 vintage Rigging is needed to load Extruder
DAVIS STANDARD 130 mm EXTRUDER ASSEMBLY Model 130 MM 45HT. SPECIFICATIONS 130 mm diameter 30:1 L/D 1989 year of manufacture Accepts 200 HP DC drive Comes with 130 mm HDPE screw Barrel heaters are not included PAYMENT We accept pay pal wire transfers and cashier's checks as forms of payment. Once payment is received and clears the item purchased will be ready for shipment. If paid by check. The check must clear JMI's bank before shipment. SHIPPING F.O.B. Port Washington. WI 53074. The buyer is responsible for arranging pick-up. JMI will load the truck. WARRANTY All items offered"Used-As-Is" Anyone is welcome to come and inspect an item in person during regular business hours. Monday thru Friday, 8:00 AM to 4:00 PM. If you are unable to come and see the item, let us know what additional information or photos you require for ... moreyour decision making process. We will do our best to comply to your request. We reserve the right to cancel this auction at any time. CONTACT US If you have any questions. Please call Bob Jackson at 262-284-1066 or e-mail us to We can also be reached via fax at 262-284-5466. FEEDBACK We pride ourselves in providing you with the best customer service. Please contact us by phone or by e-mail. We will work with you to resolve any issues as quickly as possible.
Davis-Standard Extruding Machine Gearbox Model- 35T Serial- E1646 S.O. 23750C 17.39 TO 1 Gear Reduction Must have cleared funds prior to shipping. The picture is of the actual item. No manuals or accessories are included unless it is in the picture or stated in the description. If you have any questions please feel free to ask and we will get back to you as soon as possible. Emails will be answered as promptly as possible. We are Open 7-3:30pm EST. Give us a call at 812-752-9094 and ask for Bryan Shipping is local pickup. I can get you approx. weight and dimensions if you would like to get shipping quotes. Check us out on the web at
Item 6061- Extruder: Davis Standard 4.5 120mm Cold Feed One(1) NRM 4.5" 120mm Cold Feed Extruder. 10:1 L/D, 17.36:1 G/B ratio, 75HP DC motor, clamp style head, roller feed, designed for silicone Shipping Terms: Ex works- Ohio. USA Payment Terms: Net Prior to shipping Delivery Time: Stock/ Immediate Please advise if you have any questions or would like to schedule an inspection. Soberay& Sons. Ltd. Rubber Machinery Experts www.soberaysons.com Inventory on Website Phone: 216-334-2003 Fax: 216-334-2005 5500 Walworth Ave. Cleveland. Ohio 44102 United States
YOUR SOURCE. for Pharmaceutical. Chemical, Plastics and Related Process Equipment. For more than 50 years. Federal Equipment Company has been a trusted name in the used pharmaceutical, chemical, plastics and related process equipment industry. As one of the world’s top equipment suppliers, Federal Equipment is dedicated to providing quality used equipment, outstanding service and competitive prices to meet the needs of the used pharmaceutical, chemical, plastics and related process equipment industries. | | | | | |(216) 441-9056 Mouse over image to view ONE(1) Used Davis Standard(Killion) Vacuum Sizer. 20' overall length, stainless steel construction, 6 chamber, 21" wide x 15" deep trough, 8" diameter max. opening, adjustable height, covers with dual 5 H.P. Sihi Vacuum Pumps and 3 H.P. Circulation Pumps, Serial No. 20985-1. ... moreShipping Details: Since each item's and each customer's shipping needs are unique. Shipping costs and methods will vary by item and customer. Shipping details will be configured by our experienced team at time of purchase and verified with the customer before delivery. More Info Item Number: 20578. Size: 240.000 IN. Manufacturer: DAVIS STANDARD(KILLION) Location: CLEVELAND. OHIO All items are F.O.B. Location and are sold AS IS. Please contact Bob Wells at bob@fedequip.com or call 216-441-9056 for more information. All descriptions are a reflection of the item to the best of our knowledge and are subject to change. © 2009 Federal Equipment Company 8200 Bessemer Avenue. Cleveland, OH 44127 Phone(216) 441-9056 | Fax 216.271.5210 | Email(Bob Wells) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-146d8b4fc21-0x109-