|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$70.00 Shipping Condition: New Location: China Features 1. High response speed. Dramatically lengthen the life of laser. 2. Easy control: The start and stop of laser can be easily controlled by TTL ... morelevel. And there are protection switch to test the external water. Ventilation, etc. 3. Easy control of laser power: Both 0- 5V analog signal and PWM signal can control the laser power. 4. The power supply has open circuit protection: Under the condition of good protective earthing. The power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 5. The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 6. Application: Acrylic sculpture. Cut; fabric sculpture, cut; rubber sheet sculpture, cut; etc. Technical parameters AC Input Voltage, AC 110V AC frequency, 60HZ Maximum Input Power, 550 w, Maximum Input current, 5A, Maximum Output voltage, DC 40 KV, Maximum Output current, 28 mA( up to the laser tube) Efficiency, 91% Average fault free time, ≥10000h, Response time, ≤1ms(from turn on to the output current up to 90% Operating temperature, 10°C~+40°C, Relative humidity, ≤90%RH, Withstand Voltage, Input-Output, AC1500V1min.≤10mA, Input-shell, AC1500V1min.≤10mA, Output-shell, Connect, Dimensions, 280 mm*173 mm*97 mm(L*W*H) We also have AC220V/50Hz of this item. Please contact with us if you need. We also ship to other countries and the shipping cost will be different. If you need, please contact us. Total Delivery Time = Processing Time + Shipping Time Processing Time: 2-3 Business Days Shipping Time: 7-10 Business Days( Standard Shipping) 4-7 Business Days( Expedited Shipping) All of our customers are very important to us. If you encounter delivery or"quality" problems please don't open the case but contact us. We will make it right for you. inkfrog terapeak. I000000.
Buy It Now
Free Shipping Condition: New Location: China It can be applicable to 130W-150W laser tube. Resonse speed: ≤ 1ms (from the switch signal is giver to the output current up to 90% of setting current). ... moreEfficiency: ≥ 90%(full load). 3 ． Maximum output current: DC 38mA.
Buy It Now
Free Shipping Condition: New Location: China It can be applicable to 130W-150W laser tube. Resonse speed: ≤ 1ms (from the switch signal is giver to the output current up to 90% of setting current). ... moreEfficiency: ≥ 90%(full load). 3 ． Maximum output current: DC 38mA.
Buy It Now
Free Shipping Condition: New Location: China It can be applicable to 130W-150W laser tube. Resonse speed: ≤ 1ms (from the switch signal is giver to the output current up to 90% of setting current). ... moreEfficiency: ≥ 90%(full load). 3 ． Maximum output current: DC 38mA.
Buy It Now
Free Shipping Condition: For parts or not working Location: Denver, United States Model : 2130-C2 2KW DUV 208V 60MHz. This is a used item - normal wear and tear can be expected. It has been tested. Therefore, it is "SOLD AS IS".
Buy It Now
Free Shipping Condition: New Location: New Orleans, United States Osram Xenon Short Arc Lamp XBO.
Buy It Now
$43.13 Shipping Condition: For parts or not working Location: Grantsburg, United States Unable to test without lamp, it energizes an is humming, power lamp not on, this might work well, but I have no way to test
Buy It Now
$20.39 Shipping Condition: Used Location: Port Orange, United States Missing collector lens. Fits many Nikon microscopes. Mercury short arc bulbs are prefered for UV excitation compared with Xenon due to much greater output ... moreat 365nm. Due to the defect I am selling as is for parts or repair. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-146abf03acb-0x10b-
Buy It Now
$98.00 Shipping Condition: Used Location: Milton Freewater, United States
Buy It Now
Free Shipping Condition: New Location: 浦东新区, China Maximum output current: DC 38mA.
Buy It Now
Free Shipping Condition: New Location: 浦东新区, China + 30 or AC 110V. Maximum output current: DC 38mA.
Buy It Now
$70.00 Shipping Condition: New Location: China Features 1. High response speed. Dramatically lengthen the life of laser. 2. Easy control: The start and stop of laser can be easily controlled by TTL ... morelevel. And there are protection switch to test the external water. Ventilation, etc. 3. Easy control of laser power: Both 0- 5V analog signal and PWM signal can control the laser power. 4. The power supply has open circuit protection: Under the condition of good protective earthing. The power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 5. The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 6. Application: Acrylic sculpture. Cut; fabric sculpture, cut; rubber sheet sculpture, cut; etc. Technical parameters AC Input Voltage, AC 110V AC frequency, 60HZ Maximum Input Power, 550 w, Maximum Input current, 5A, Maximum Output voltage, DC 40 KV, Maximum Output current, 28 mA( up to the laser tube) Efficiency, 91% Average fault free time, ≥10000h, Response time, ≤1ms(from turn on to the output current up to 90% Operating temperature, 10°C~+40°C, Relative humidity, ≤90%RH, Withstand Voltage, Input-Output, AC1500V1min.≤10mA, Input-shell, AC1500V1min.≤10mA, Output-shell, Connect, Dimensions, 280 mm*173 mm*97 mm(L*W*H) We also have AC220V/50Hz of this item. Please contact with us if you need. We also ship to other countries and the shipping cost will be different. If you need, please contact us. Total Delivery Time = Processing Time + Shipping Time Processing Time: 2-3 Business Days Shipping Time: 7-10 Business Days( Standard Shipping) 4-7 Business Days( Expedited Shipping) All of our customers are very important to us. If you encounter delivery or"quality" problems please don't open the case but contact us. We will make it right for you. inkfrog terapeak. I000000.
Buy It Now
Free Shipping Condition: New Location: 庐阳区, China Model: HY-C150-Y3 for 100w,130w,150w CMA Co2 Laser Cutting Machine. Response Speed less than or equal to 1ms (from the switch Signal is given to the output ... morecurrent up to 90% of the setting current). Efficiency greater than or equal to 90%(full load).
Buy It Now
Free Shipping Condition: New Location: China (1) Good compatibility: It can be applicable to 60W,50W,40W laser tubes from different manufacturers. 9) Application: Acrylic sculpture, cut; fabric sculpture, ... morecut; rubber sheet sculpture, cut, etc. 2) Cutting Type and Sculpting Type: The cutting type has a good power stability and strong adaptability; while the sculpting type has a quick response speed and good engraving effect.
Buy It Now
Free Shipping Condition: New Location: China This sale is for a heavy duty 40W~60W CO2 Laser Power Supply. The power is adjustable through it's TTL control or by a 5K variable resistor. It support ... moreany CO2 laser for up to 65Watt. Small design with excellence PWM control circuitry. Input: AC 110V/220V Power: 40~60WWatt Trigger Voltage: 26KV Operating Voltage: 22KV Current: 20mA(26mA max) Size(WxLxD) 165*145*90 Weight(net) 3Kg(6.5lb) Weight(Pkg) 4Kg(9lb) Note: This is a device with high voltage output. User must be careful when using it. Terms and Agreement Most order shipped within 1 business day. Estimated shipping time: 3-5 days. Sometimes a couple days delay may happen due to holidays. Or adverse weather. All our products are carefully packed to avoid potential shipping damage. All DOA must be reported in 5 business days or will not be considered afterward. REFUND: We accept return for refund within 7 days starting from the day the package is delivered. No more refund is granted after 7 days. The return items must be in brand new or no sign of use condition. Buyer's responsible for all shipping cost to ship the items back to us. S&H is non-refundable for all refund. EXCHANGE: We carry a 30 to 180 days warranty to most of our products. Please contact us if the item is eligible for an exchange. We reserve the rights to decline all exchange items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-140284f46b2-0x101-
Buy It Now
Free Shipping Condition: New Location: China This sale is for a heavy duty 40W~60W CO2 Laser Power Supply. The power is adjustable through it's TTL control or by a 5K variable resistor. It support ... moreany CO2 laser for up to 65Watt. Small design with excellence PWM control circuitry. Input: AC 110V/220V Power: 40~60WWatt Trigger Voltage: 26KV Operating Voltage: 22KV Current: 20mA(26mA max) Size(WxLxD) 165*145*90 Weight(net) 3Kg(6.5lb) Weight(Pkg) 4Kg(9lb) Note: This is a device with high voltage output. User must be careful when using it. Terms and Agreement Most order shipped within 1 business day. Estimated shipping time: 3-5 days. Sometimes a couple days delay may happen due to holidays. Or adverse weather. All our products are carefully packed to avoid potential shipping damage. All DOA must be reported in 5 business days or will not be considered afterward. REFUND: We accept return for refund within 7 days starting from the day the package is delivered. No more refund is granted after 7 days. The return items must be in brand new or no sign of use condition. Buyer's responsible for all shipping cost to ship the items back to us. S&H is non-refundable for all refund. EXCHANGE: We carry a 30 to 180 days warranty to most of our products. Please contact us if the item is eligible for an exchange. We reserve the rights to decline all exchange items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-140284f46b2-0x101-
Buy It Now
$70.00 Shipping Condition: New Location: China Goog compatibility:It can be applicable to 80W laser tube. Cutting type and Sculpting type:The cutting type has a good power stability and strong adatpability:while ... morethe sculpting type has a quick response speed and good engraving effect.
Buy It Now
Free Shipping Condition: New Location: China It can be applicable to 130W-150W laser tube. Resonse speed: ≤ 1ms (from the switch signal is giver to the output current up to 90% of setting current). ... moreEfficiency: ≥ 90%(full load). 3 ． Maximum output current: DC 38mA.
Buy It Now
Free Shipping Condition: New Location: 浦东新区, China Maximum output current: DC 38mA. We provide technology support by online service.
Buy It Now
Free Shipping Condition: New Location: 庐阳区, China Model: HY-C80 for 60w,80w Yueming CMA Co2 Laser Cutting Machine. Response Speed less than or equal to 1ms (from the switch Signal is given to the output ... morecurrent up to 90% of the setting current). Efficiency greater than or equal to 90% (full load).
Buy It Now
$70.00 Shipping Condition: New Location: China Features 1. High response speed. Dramatically lengthen the life of laser. 2. Easy control: The start and stop of laser can be easily controlled by TTL ... morelevel. And there are protection switch to test the external water. Ventilation, etc. 3. Easy control of laser power: Both 0- 5V analog signal and PWM signal can control the laser power. 4. The power supply has open circuit protection: Under the condition of good protective earthing. The power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 5. The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 6. Application: Acrylic sculpture. Cut; fabric sculpture, cut; rubber sheet sculpture, cut; etc. Technical parameters AC Input Voltage, AC 110V AC frequency, 60HZ Maximum Input Power, 550 w, Maximum Input current, 5A, Maximum Output voltage, DC 40 KV, Maximum Output current, 28 mA( up to the laser tube) Efficiency, 91% Average fault free time, ≥10000h, Response time, ≤1ms(from turn on to the output current up to 90% Operating temperature, 10°C~+40°C, Relative humidity, ≤90%RH, Withstand Voltage, Input-Output, AC1500V1min.≤10mA, Input-shell, AC1500V1min.≤10mA, Output-shell, Connect, Dimensions, 280 mm*173 mm*97 mm(L*W*H) We also have AC220V/50Hz of this item. Please contact with us if you need. We also ship to other countries and the shipping cost will be different. If you need, please contact us. Total Delivery Time = Processing Time + Shipping Time Processing Time: 2-3 Business Days Shipping Time: 7-10 Business Days( Standard Shipping) 4-7 Business Days( Expedited Shipping) All of our customers are very important to us. If you encounter delivery or"quality" problems please don't open the case but contact us. We will make it right for you. inkfrog terapeak. I000000.
Buy It Now
$70.00 Shipping Condition: New Location: China Features 1. High response speed. Dramatically lengthen the life of laser. 2. Easy control: The start and stop of laser can be easily controlled by TTL ... morelevel. And there are protection switch to test the external water. Ventilation, etc. 3. Easy control of laser power: Both 0- 5V analog signal and PWM signal can control the laser power. 4. The power supply has open circuit protection: Under the condition of good protective earthing. The power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 5. The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 6. Application: Acrylic sculpture. Cut; fabric sculpture, cut; rubber sheet sculpture, cut; etc. Technical parameters AC Input Voltage, AC 110V AC frequency, 60HZ Maximum Input Power, 550 w, Maximum Input current, 5A, Maximum Output voltage, DC 40 KV, Maximum Output current, 28 mA( up to the laser tube) Efficiency, 91% Average fault free time, ≥10000h, Response time, ≤1ms(from turn on to the output current up to 90% Operating temperature, 10°C~+40°C, Relative humidity, ≤90%RH, Withstand Voltage, Input-Output, AC1500V1min.≤10mA, Input-shell, AC1500V1min.≤10mA, Output-shell, Connect, Dimensions, 280 mm*173 mm*97 mm(L*W*H) We also have AC220V/50Hz of this item. Please contact with us if you need. We also ship to other countries and the shipping cost will be different. If you need, please contact us. Total Delivery Time = Processing Time + Shipping Time Processing Time: 2-3 Business Days Shipping Time: 7-10 Business Days( Standard Shipping) 4-7 Business Days( Expedited Shipping) All of our customers are very important to us. If you encounter delivery or"quality" problems please don't open the case but contact us. We will make it right for you. inkfrog terapeak. I000000.
Buy It Now
$70.00 Shipping Condition: New Location: China Goog compatibility:It can be applicable to 80W laser tube. Cutting type and Sculpting type:The cutting type has a good power stability and strong adatpability:while ... morethe sculpting type has a quick response speed and good engraving effect.
|
|
|
|
EXCELLENT USED PEK SHORT ARC POWER SUPPLY FOR HIGH INTENSITY XENON AND MERCURY
A VERY GOOD USED PEK SHORT ARC POWER SUPPLY FOR USE WITH HIGH INTENSITY XENON OR MERCURY LAMPS. DC OUTPUT. PEK MODEL 401A. TESTED AND OPERATIONAL. DESIGNED FOR RACK MOUNT. BUILT-IN LINE CORD. NICE UNIT AT A GREAT PRICE! PLEASE BE FAMILIAR WITH THE OPERATION OF THIS UNIT. NO TECHNICAL DATA OR INSTRUCTION MANUAL CAME WITH THE POWER SUPPLY. THE ADJUST CURRENT KNOB IS NOT WITH THE UNIT. BUT A PAIR OF PLIERS WORKS JUST FINE. The shipping weight is 37 lbs. with ESTIMATED SHIPPING COST OF $29.90 TO MANY PARTS OF THE U.S. VIA USPS. Large Carton/ Oversize rates apply. Please email for a firm shipping quote to you! On Apr-27-13 at 12:48:09 PDT. Seller added the following information: Use the FREE Counters 1 million sellers do- Vendio!
|
|
|
LEITZ WETZLAR SHORT ARC LAMP POWER SUPPLY 1149 MERCURY XENON 100W 75W
Looks good. But I have no safe way to test it and I don't want to get shocked. Powers on, fan runs. Sold as-is. Weighs 26 lbs. before packing. Ask questions before bidding. Check my feedback and bid with confidence. Read what the feedback says about my items. Check out my other items! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
ERNST LEITZ Wetzlar Microscope 1230 Short Arc Lamp Power Supply
You are bidding on a ERNST LEITZ Wetzlar Microscope 1230 Short Arc Lamp Power Supply in good condition This power supply was removed from a local lab that recently upgraded their equipment The power supply powers on without error and was working well when it was removed. Unfortunately I don't have the light source. So this auction is only for the power supply as seen in the photos. If you have any questions regarding this listing. Please contact me via the eBay message system and I will help you out. The shipping and packaging fees will be $29.95 within the USA This includes professional packing in a new box. Shipping charges, and insurance + tracking number If you don't live in the US. Please contact me and we can determine the cost of shipping to your location. Thank you for looking and please check out my other listings for more ... moreinteresting merchandise
|
|
|
Electro Leitz Short Arc Lamp Power Supply Model 1230
Short Arc Lamp Power Supply- Used in great working condition- Please view the pictures to see what you are bidding on- Feel Free to make a reasonable offer. Free Shipping Please email me if you have any questions.
|
|
|
ERNST LEITZ Wetzlar Microscope 1230 Short Arc Lamp Power Supply & Light Source
Welcome to Labb Surplus! We carry all types of Hi- Tech. Medical and Laboratory Surplus at bargain prices. Our Business is one of the largest and most diverse in Houston. Our stock is comprised of gently used items from State Universities. Hospitals and Government Institutions. Up For Auction 0 1- USED ERNST LEITZ Wetzlar Microscope 1230 Short Arc Lamp Power Supply& Light Source Unit Powers Up and Appears to Function Properly Came from working environment Only what is pictured/in description is included This unit is surplus from a local university hospital 30 Day No DOA Guarantee limited to item powering up. Does not include calibration, or other maintenance type issues ~ Guarantee is void if security features are removed or tampered with ~ Please call us for any questions and information regarding this item Debby Mario(530) 383-0671(281) ... more300-6104 SHIPPING INFORMATION ALL ITEMS SOLD AS-IS. SHIPPING INFORMATION ALL ITEMS SOLD AS-IS. Labb Surplus recommends shipping LARGE ITEMS( Over 120 Lbs. to a commercial location with unloading capabilities to get the best possible rate. If this item must be shipped to a residential address we can do so. However, the freight company charges more for this do to the fact a lift gate truck is required. When needing a quote for shipping please include the following: Commercial or Residential address Ebay item number Zip code of where the item is to be shipped Phone number Shipping Instructions: Shipping and handling included in shipping calculator when using Ebay's Shipping tool. Due to the fragile nature of scientific and laboratory items. We use a professional packing service to insure the highest quality packing available. Do not try to negotiate shipping rate after the end of the auction as emails requesting a change after the end of the auction will NOT be answered. Shipping of items over 100 Lbs: Labb Surplus will determine which items should be shipped freight. Due to packages damaged by common carrier we will determine best form of shipping. If you decide to us
|
|
|
MERCURY/XENON SHORT ARC POWER SUPPLY FOR PARTS BY CHIU TECHNICAL MODEL MX75-100T
THIS HIGH VOLTAGE DC SUPPLY IS DESIGNED FOR MERCURY/ XENON SHORT-ARC APPLICATIONS. UNIT DOES NOT POWER UP AND IS BEING OFFERED FOR REFURBISHMENT OR PARTS. NO EVIDENCE OF ANY BURNED-OUT COMPONENTS. AND COULD POSSIBLY BE A SIMPLE FIX. The Shipping Weight is 16 lbs. rounded up) with shipping cost of $14.90 anywhere in the U.S. via USPS. International shipping is not offered. As it is doubtful any will wish to pay $60.00- $100.00 to ship a non-functioning item.
|
|
|
Ernst leitz Electro Powerpacs Corp Short Arc Lamp Power supply model 1149
Item is in a great physical condition. I plugged it in and hums ready for work. Free shipping I don't know that much about the item so please ask all questions Thank you for looking and have a great day
|
|
|
E. Leitz 1230 Short Arc Lamp Power Supply For Parts or Repair
1-888-9WEC2IT(993-2248) Problem? E. Leitz 1230 Short Arc Lamp Power Supply For Parts or Repair. Item Description. Manufacturer E. Leitz Inc, Model Number 1230, Category Business& Industrial Healthcare. Lab& Life Science Lab Equipment Power Supply, Cosmetic Wear Power supply is in good overall condition with minor scratches on the top panel. Functional Condition Not functional, Testing Procedure Power supply does not power on. Items Included In Listing E. Leitz 1230 Short Arc Lamp Power Supply For Parts or Repair. Power cord- as shown, Not Included Any additional items not pictured. MDM992. Shipping charges seem too high? Please contact us through"ask a question" on the bottom of this ad with the item number and your postal code and we will investigate shipping charges.if you are an international buyer. Please provide city, ... morecountry, and postal code. Sorry, we do not use customer shipping accounts. Please note we only offer shipment via UPS unless otherwise specified. Want to pick up an item to save on shipping? Please let us know that you wish to pick up the item locally. Our hours for pick up are M-F 10-4pm. Please note. Virginia sales tax of 5.3% will be charged for all items locally picked up. We only accept Cash or Credit card payments for all local pick up purchases. Orders not picked up within 2 weeks from the date of purchase will incur a $10 per day storage fee. We have recently moved! Our new address is: C2 Management 351 Station Rd. Suite 8, Berryville, VA 22611. 540-955-5740. Buying more items from us? We offer a discount for additional purchases that can be shipped together. After the first item won. Please notify us that you are still bidding.do not pay until you are finished bidding so that we can get you a combined shipping total. Please request combined shipping total. Please be advised, we only combine shipping on items won within 6 days following the end of auction on the first item won. PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or n
|
|
|
ERNST LEITZ SHORT ARC LAMP POWER SUPPLY MN: 1230
Has general signs of normal wear and tear which may include scratches. Scuffs, dirt, sticker residue etc on the exterior casing. PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in description. ERNST LEITZ SHORT ARC LAMP POWER SUPPLY MN: 1230 Condition: USED& UNTESTED. Estimated Packed Shipping Weight: 30.00 lbs. Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Shipping Notice: Additional shipping charges may apply; pending location. Size and weight of the item(s) Lister: JN Can't find the answer you're looking for? ... morecontact us! Business Hours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday. Email Address: Please Use The eBay Messaging Service, Phone: 408-762-7290, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be securely packaged or palletized and shipped via the best and most economical way possible. We typically ship within 1
|
|
|
Zeiss VSG HBO 100 Power Supply For Mercury Vapor Short Arc Lamp (Jena).
Power supply for mercury vapor short arc lamp. Model VSG HBO 100(Type VSG HBO 100/ 001.26E) This model number is 432604-9901-000. ZEISS Cost new is over 1.500.00 This is in great shape and works perfectly. Make offer of bid away. Thanks for looking
|
|
|
ORIEL 68820 Power Supply 66022 Housing 66247 Mirror 450 W Lamp-Short Arc System
Up for sale is an excellent cosmetic and working condition Oriel Short Arc projection system. Included are an Oriel 68820. 400- 1000 Watt universal power supply, an Oriel 66022 400- 1000 Watt Lamp housing with ignitor and cooling fan and an Oriel 3" lens system 90 degree mirror. The power supply is rated to power Xenon, Mercury Xenon and Mercury lamps up to 1000 Watts. All cables are included: 220/240 VAC power cord and plug, High Voltage signal cables from power supply to lamp housing, Interlock cable from power supply to lamp housing and Ignitor Drive cable from power supply to lamp housing. The power supply features a"preset" option allowing the operator to set the power of the lamp prior to starting the lamp. The meter reads Watts, Volts and Amps- readings are changed with the toggle switch. This system works flawlessly. ... moreThe lamp starts immediately, the light emitted is very steady. Included is an Oshram 450 Watt Xenon lamp with very low time as evidenced by the sharp Cathode electrode in the pic. The lamp will be removed and boxed separately because these lamps do not ship well in the housing. This system is a 9+ out of 10 both in cosmetics and in function. The power supply is heavy hense the reason for the shipping cost. Unit is guaranteed to be not DOA. Please paste the following link in your browser to watch the Youtube video showing the unit in action. http:youtu.be/CbSfN-Be2Gk I used this system to test new short arc lamps for my aviation and military short arc searchlights prior to installing them in the lights. I developed some bulging lower back disc issues which makes lifting the power supply detrimental to my back health. I now have a newer switching supply which is lighter weight. Otherwise. I would not be selling the system. The power supply ID plate indicates 220 VAC for input power but I have always run it on 240 VAC.
|
|
 |