In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
0.99
Buy It Now
$5.95 Shipping
Condition: New
Location: Marion, United States
20 machines on-line ranging from 85ton to 500ton.
$
100.00
Buy It Now
Free Shipping
Condition: New
Location: Dawsonville, United States
You are looking at a New Stratasys FDM Standard 92 / 92ci (1510cc) Product # 310-20300. Everything included in the ad is shown in the pictures and listed ... morein the accessories line unless otherwise stated.
$
13.69
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Rocker Switch, System Type Electric Dump Truck and Trailer Body, Color Black, Number of Pieces 1, Tarp Material Plastic. General Purpose. & Recepticles. ... moreElectrical Outlets. Light Industrial. and Enclosures.
$
140.40
Buy It Now
$26.05 Shipping
Condition: Used
Location: Archbold, United States
Manufacturer: TA systems. Serial Numbers must be verified. Manufacturer Part Number: TA-40CS. We have over 10 years combined experience in Industrial ... moreSurplus. We love to hear from you. See photos for more details.
$
3.99
Buy It Now
$4.50 Shipping
Condition: New
Location: Northridge, United States
1 ALLEN WRENCH PER ORDER NOT PER COUPLER. New Precision Aluminum Rigid Shaft Coupler6.35mm x 8mm.
$
58.43
Buy It Now
Free Shipping
Condition: New
Location: Secaucus, United States
110V Plastic Pipe Welding Tool kit, Adjustable Socket Fusion Pipe Welder with 0.79/0.98/1.26" Die. 1 Pipe Welder. - 0-340 ℃ temperature adjustable to ... moredeal with different pipe welding needs. - 6061 aluminum ingot thickened panel for ideal thermal conductivity.
$
18.29
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Lanyard Hand Manual Pull Air Valve, Length 3 In., Width 1 3/4 In., Height 1 In., Material Plastic, Finish Black, For Use On 3FHV7, 3FHV8, And 3FHV8, Includes ... more24 In Pull Chain, 1/4 In O.D. Brass Fittings, and Mounting Screws.
$
16.99
Buy It Now
Free Shipping
Condition: New
Location: Colleyville, United States
Includes 20 rods made of 100% pure LDPE plastic material, no contaminants. These rods are LDPE Polyethylene Plastic. Warning: Mixing different types of ... moreplastics will likely result in poor quality repairs and poor longevity of the welds.
$
19.99
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
$
9.85
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. & Industrial. New Balance Midspwrgr-8D Athletic ... moreShoe,D,8,Gray,Pr.
$
120.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Lewisville, United States
Used for master models, CNC styling models, prototypes, and visual models. RenShape 440 machines easily at fast cutting speeds, finishes to a good surface ... morewith excellent edge definition and produces very little tool wear.
$
12.99
Buy It Now
$4.50 Shipping
Condition: New
Location: Northridge, United States
New Aluminum Flexible Shaft Coupler.12.7MM X 12.7MM | 1/2" X 1/2" (Shaft Inputs). No other accessories included. Radial Beam. Clamp Type with set screws. ... moreMax speed 5500rpm.
$
5280.00
Buy It Now
Condition: Used
Location: Shippensburg, United States
78 in x 36 in x 56 in. No other accessories not on the picture are included.
$
26.89
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Low Tone Horn, Electric, Length (In.). 5, Width (In.). 4, Height (In.). 3-1/2, Dia. Lincoln Electric K2176-1 Lug Adapter,Lug/Twist Mate 18 In L. Sakrete ... more120045 5 Gal. White, Dries To Clear Sealer. Electrical Boxes.
$
12.49
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Ridgid 57408 Cordless Press Tool Kit,13" L,12 V. Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. ... more& Industrial.
$
374.99
Buy It Now
$19.63 Shipping
Condition: Used
Location: Moultrie, United States
We do not buy direct from the manufacturers or from authorized dealers. The serial numbers in the pictures are covered to prevent mischief by hackers ... moreor others that want to cause harm. The item is sold as is.
$
61.79
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Reflective Tape, Reflective Color Red, White, Width 2 in, Length 30 ft, Adhesive Material Acrylic, Backing Material Retroreflective Microprismatic Material, ... moreThickness 14 mil, Adhesion Strength 48 oz/in, Outdoor.
$
74.50
Buy It Now
Free Shipping
Condition: Used
Location: Lakeview, United States
$
21.99
Buy It Now
Free Shipping
Condition: New
Location: Los Angeles, United States
3D Printer Parts. PLA, or Polylactic Acid, is a commonly used thermoplastic material that does not require the use of a heated print bed. Compatible with ... moremost 3D printers currently out on the market.
$
10.49
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial. Zoro Select Lra-Poa 50G-Fi Kingpin ... moreSwivel Caster,Nylon,2 In.,165 Lb.
$
19.00
Buy It Now
Free Shipping
Condition: New
Location: Shelbyville, United States
$
10.99
Buy It Now
Free Shipping
Condition: New
Location: Signal Hill, United States
Brand new, factory sealed, high quality Tru-Flate 34-955 Air/Liq Adapter Set, works with ch-3 valve. (Exactly as shown) Save now!!
$
14.24
Buy It Now
Free Shipping
Condition: New
Location: Clemmons, United States
Wolo 305-2T High Tone Disc Horn, Replacement for Cars, Trucks, Vans (12 Volts)
$
37.39
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Tie Rod Adjusting Tool, Tool Type Universal Tie Rod Adjusting Tool, Application Permits 360 Degrees Rotation of the Adjusting Sleeve, For Use With Compact ... moreand Standard-Size Cars and Light Trucks, Material Carbon Steel, Overall Length 11 1/8 in, Overall Width 3 5/16 in, Size 11 1/8 in � 3 1/4 in � 5/8 in, Includes -.
$
7.50
Buy It Now
$4.50 Shipping
Condition: New
Location: Northridge, United States
New Precision Aluminum Flexible Shaft Coupler. 4MM x 8MM 4 grub screws. Outside Dimensions 25mm x 18mm Check my listing for other available sizes: 3m ... morex 3mm 3mm x 5mm 3mm x 6.35mm 4mm x 4mm 4mm x 5mm 4mm x 6mm 4mm x 6.35mm 4mm x 7mm 4mm x 8mm 5mm x 5mm 5mm x 6.35mm 5mm x 6mm 5mm x 8mm 6mm x 6mm 6mm x 6.35mm 6mm x 8mm 6mm x 10mm 6.35mm x 6.35mm 6.35mm x 8mm 6.35mm x 10mm 7mm x 7mm 8mm x 10mm 10mm x 10mm
$
27.57
Buy It Now
$19.39 Shipping
Condition: New
Location: Laurens, United States
Donnelly APG#2. APG#2 is ideal for injection molds. APG#2 - 2 oz jar. APG#2 - 5 gallon pail. APG#2 - 3 oz tube. APG#2 - 14.5 oz tube. APG - 12 oz spray ... morecan (contains no CFC's). 1 lb jar (16oz)White synthetic All Purpose Grease.
$
69.99
Buy It Now
$21.95 Shipping
Condition: New
Location: Temple, United States
# PLB12SS.
$
16.00
Buy It Now
Free Shipping
Condition: New
Location: Colleyville, United States
Includes 20 rods made of 100% pure HDPE plastic material, no contaminants. These rods are HDPE Polyethylene Plastic. Warning: Mixing different types of ... moreplastics will likely result in poor quality repairs and poor longevity of the welds.
$
12.99
3d 11h 13m 48s
0 bids
$14.62 Shipping
Condition: New – Open box
Location: Salt Lake City, United States
Model: 40KHz Adaptor. Manufacturer: BRANSON. Item Type: Electric Plastic Welder. Provide our staff with Salt Lake City, Utah 84116. Pickup Location Local ... morePick-up.
$
13.83
Buy It Now
Free Shipping
Condition: New
Location: Brooklyn, United States
Easy to install and remove without tools, our umbrella screw for patio umbrella stands would be a nice selection for you. Plastic Thread Size: M8x40mm. ... moreThread Pitch:1.25mm. YOU WILL GET.
$
10.99
Buy It Now
Free Shipping
Condition: Used
Location: Scottsburg, United States
THANKS FOR LOOKING. MESSAGE IF ANY QUESTIONS
$
12.99
Buy It Now
$4.50 Shipping
Condition: New
Location: Northridge, United States
No other accessories included. Radial Beam. Clamp Type with set screws. New Aluminum Flexible Shaft Coupler9.53MM x 12.7MM / 3/8" x 1/2" (Shaft Inputs). ... moreMax speed 5500rpm.
$
14.69
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Lascar Wireless Alert Ld Water Leak Sensor. General Purpose. Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. & ... moreIndustrial.
$
70.00
Buy It Now
$22.45 Shipping
Condition: New
Location: Miami, United States
(Forming Area 7 1/4 x 7 1/4 with great suction) What Else Do You Need?. With this 9 x 9 forming box you can get 4 pieces out of a 18 x 18 plastic sheet. ... more: 7 1/4 x 7 1/4 (that's the size of the forming area,where the holes are).
$
50.00
Buy It Now
Free Shipping
Condition: New
Location: Hayward, United States
This is a New Ronix PE HDPE Pipe Fusion Butt Welder Socket Heater. • This fusion welder can weld HDPE, PE, and PB Poly Pipe. • Includes heater iron 20mm ... moresocket, 25mm socket. • 220V, 60 Hz, single phase.
$
22.79
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
BALDWIN FILTERS. Baldwin Filters Pt777 Hydraulic Filter,4-3/8 X 8 In. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical ... moreBoxes. General Purpose.
$
9.79
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Lysol Rec 85668 Bathroom Cleaner With Hydrogen Peroxide, Cool Spring Breeze, 22. Radians Sv4gmxl Xl High Visibility Vest, Silver. Light Industrial. & ... moreRecepticles. Electrical Outlets. and Enclosures. Electrical Boxes.
$
17.59
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Zoro Select Tridon 632048 Hose Clamp,2-9/16 To 3-1/2In,Sae48,Pk300. Dakota Systems Ds-Ss131612-54-Pg/10 Strut Channel. & Recepticles. Electrical Outlets. ... moreLight Industrial. and Enclosures. Electrical Boxes.
$
105.82
Buy It Now
$20.49 Shipping
Condition: Used
Location: Gurnee, United States
Branson - Gold Ultrasonic Booster - their is no Part #, and it looks to be a Branson Booster, though it is unmarked. A standard Gold Branson Booster is ... morea 1.5:1 Booster.
$
19.51
Buy It Now
$20.56 Shipping
Condition: Neu
Location: Pfullendorf, Germany
Produktinformationen Betzmann Galvanik - Nickelelektrolyt - Nickel für Jedermann erhältlich! Die Beschichtung mit Nickel gehört zu den wichtigsten Verfahren ... morein Industrie und Forschung. leitenden Oberflächen.
$
119.95
Buy It Now
Free Shipping
Condition: New
Location: Tampa, United States
Introducing the "Adtech P17" high heat resistant filler set-fast system, brought to you by Ad Tech Plastics. With its smooth workable paste and set-fast ... morecure, P-17 expedites applications for repair or finish.
$
12.65
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
BALDWIN FILTERS. 17/32 in, 31/32 in. Zoro Select U51566.025.0150 1/4"-28 Socket Head Cap Screw, Plain 18-8 Stainless. Light Industrial. & Recepticles. ... moreElectrical Outlets. and Enclosures. Electrical Boxes.
$
27.79
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
$
55.50
Buy It Now
Free Shipping
Condition: New
Location: Secaucus, United States
110V Plastic Pipe Welding Tool kit, Adjustable Socket Fusion Pipe Welder with 0.79/0.98/1.26" Die. 1 Pipe Welder. - 0-340 ℃ temperature adjustable to ... moredeal with different pipe welding needs. - 6061 aluminum ingot thickened panel for ideal thermal conductivity.
$
39.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Knoxville, United States
Item: Dukane:SH-2-8/11. We may use anti tampering labels at our discretion.
$
11.59
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Weatherhead 1468X12x12 Male Connector,3/4-14,3/4 In Tube Sz. Light Industrial. Zoro Select 1Whd3 O-Ring,Dash 230,Pu,0.13 In.,Pk5. & Recepticles. Electrical ... moreOutlets. and Enclosures. Electrical Boxes. General Purpose.
$
6.98
Buy It Now
Free Shipping
Condition: New
Location: Tulsa, United States
Length: 25 mm.
$
22.24
Buy It Now
Free Shipping
Condition: New
Location: Sedalia, United States
BALDWIN FILTERS P40021 Element An O-Rings ,Made In USA.
$
9.99
Buy It Now
$4.50 Shipping
Condition: New
Location: Northridge, United States
New Precision Aluminum Rigid Shaft Coupler10MM x 10MM.
$
21.19
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial. Lascar Wireless Alert Ld Water Leak ... moreSensor.
$
7500.00
Buy It Now
$300.00 Shipping
Condition: Used
Location: Irwin, United States
Up for sale, a used Spec hot wedge fabric welder, made by Sinclair. We make no claim as to functionality or provide any type of warranty on any item. ... moreWhat you see is what you get; nothing more, nothing less.
$
107.99
Buy It Now
Free Shipping
Condition: New
Location: United States
OTC 6497 Pitman Arm Puller,Max. Spread 3 1/4 In. Pitman Arm Puller, Tool Type Arm Puller, Length 13 13/32 in, Width 10 39/64 in, Height 8 1/2 in, Capacity ... more-, Material Steel, For Vehicle Tool Category Suspension, Color Black, Includes -, Number of Pieces 1, Application Two Clamp Bolts Lock The Jaws On Pitman Arm and Works On 2005 and Newer Ford F-250 and F-350 Four-Wheel-Drive Super Duty Trucks, For Use With 2005 and Newer Ford F-250 and F-350 Four-Wheel-Drive Super Duty Trucks.
$
10.49
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. & Industrial. Westward 22Uv14 Flat Chisel,Sds ... moreMax,L 12 In.,W 1 In.
$
6.39
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
BALDWIN FILTERS. Baldwin Filters Pt9237 Hydraulic Filter,2-3/4 X 5-7/32 In. Nvent Erico Tdx100m120/208 Surge Protection Device,3 Phase,120/208V. Marathon ... moreMotors 048A17o172 Condenser Fan Motor,1/2 Hp,1625 Rpm,60Hz.
$
13.26
Buy It Now
$5.99 Shipping
Condition: New
Location: Minooka, United States
GOLDENROD 595-5. No. 595, Gasket Material Rubber, Gasket Outside Dia. 2 51/64 in, Gasket Inside Dia. 2 15/32 in, Thread Size 1 In.-12. This fuel filter ... morecan help protect engines and fuel system components from the damaging effects of contaminants such as water, fungus and bacteria, precipitates, particulates, and wax.
$
25.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Lawton, United States
New, old stock, fuel filter base for use with a Baldwin BF955, Carquest 89006, Nappa 4006, Wix 24006, etc. I believe the inline fittings are 1/2" pipe. ... moreMade in U.S.A. Fast, free USPS shipping!
$
33.37
Buy It Now
$5.99 Shipping
Condition: New
Location: Minooka, United States
MAXXIMA M50910. This LED flasher converts standard LED lights to warning mode. Diversion contrary to U.S. law is prohibited. HONEYWELL MILLER H5CC221122 ... moreSafety Harness,Universal Harness Sizing. ACTION PUMP ACT2871 Hand Drum Pump,Piston,28 oz.
$
15.09
Buy It Now
$5.00 Shipping
Condition: New
Location: United States
Weatherhead 1468X12x12 Male Connector,3/4-14,3/4 In Tube Sz. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General ... morePurpose. & Industrial.
$
99.99
Buy It Now
Free Shipping
Condition: New
Location: Lees Summit, United States
$
234.09
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
Bayco(R) Products, Inc., SL-3029 extra-heavy-duty 500A booster cable features parrot design jaws and 2 AWG gauge cord. BAYCO SL-3029. Grainger reserves ... morethe right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
 In 

Former Listings  
 
1999 Niigata 85 Ton, 3.46 oz. Model NN85H4 Injection Molding Machine
Machine Details ~ Item 8722 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 85 Ton. 3.46 oz. Injection Molding Machine, Manufacturer: Niigata, Model: Year: NN85H4. 1999. Features: Tonnage: 82.5 US Tons | Shot Size: 3.46 oz. | Screw Diameter: 1.38' | Opening Stroke: 11.81' | Min/Max Mold Height: 6.69'14.96' | Platen Size: 20.87' x 20.87' | Open Daylight: 26.77' | Distance Between Tie Bars: 14.17' x 14.17' | Injection Pressure: 29.510 psi | Screw Stroke: 4.53' | Ejector Stroke: 2.95' | Voltage: 480/3/60, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this ... moreequipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale.
2005 Mitsubishi 610 Ton, 80 oz. Model 610MMJ-80 Injection Molding Machine
Machine Details ~ Item 8720 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 610 Ton. 80 oz. Injection Molding Machine, Manufacturer: Mitsubishi, Model: Year: 610MMJ-80. 2005. Features: Tonnage: 610 US Tons | Shot Size: 80 oz. | Platen Size: 49.2' x 49.2' | Min/Max Mold Height: 15.7'31.5' | Tie Bar Distance: 33.8' x 33.8' | Max Daylight: 63' | Control: MAC VII, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior ... moresales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specifications. Absolute Machinery Corporation Standards Terms and Conditions Apply to this Offer- these are inclu
EMI HOPPER MAGNET RECEIVER
AS IS IN GOOD WORKING CONDITION EMI HOPPER MAGNET/ RECEIVER
Toshiba 610 Metric Ton Plastic Injection Molding Machine (650 Tons US)
Toshiba Plastic Injection Molding Machine Model ISE 610-33B Capacity 610 Metric Tons(650 Ton US) Year 1987 Shot Size 75.8 oz Clamp Stroke 53.1" Max Daylight 70.9" Min Daylight 17.8" Overall Dimension 84" tall x 84" wide x 30' long Feel free to contact me for more information or to dicker and deal. This machine is being marketed outside of Ebay and is subject to prior sale. All machines are sold in"as is condition no warranty" FOB truck Michigan Posted with,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-14322f0522b-0x100-
Meike DVD CD Kata Systems Mold for Injection Molder w/ adjusters (MDMI)
Meike DVD CD Kata Systems Mold for Injection Molder w/ adjusters(MDMI) Meike MDMI DVD CD Kata Systems Mold for Injection Molder with Adjusters This item requires freight shipping. Please contact us for a quote prior to purchasing. 35.00 SHIPPING IS CRATING FEE ONLY This item requires palletized freight shipping. If you would like us to arrange transport. Please do not pay until we have entered the quoted freight shipping rate in your eBay invoice. We are happy to assist in booking transportation for you and can add that service to your order. Please contact us if you would like a freight shipping quote. Local pickup is encouraged, which has no additional fee. If you have any questions please contact us prior to bidding. Phone: 805) 648-3300, Normal business hours are 8am- 5pm PST Monday through Friday, Recycled Goods is located at: 3820 N. ... moreVentura Avenue. Ventura, CA 93001, PID 45565 dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14322f0523b-0xea-
48' Aluminum Silo / Resin / Pellet / Location: Northeast / **Loading Included**
Peabody Tectank Resin/ Pellet Silo Construction: Aluminum Diameter 12' Height: 48" Capacity 4420 Cu ft 40 lbs/ cu ft Serial# 64308 Year Mfg:1996 Designed for PE Pellets Photo: Silo on right is for sale Info: 802-342-0293 Location: St. Albans VT Sold due to overseas plant relocation*Silo sold loaded on truck* Loading to be scheduled based on crane availability in January 2014 Transportation assistance is available at negotiated price Payment by Company Check/ Certified Check or Wire transfer is preferred
Van Dorn 75 Injection Molding Machine RS-5F 1982
Van Dorn 75 Injection Molding Machine RS-5F 1982 Brand Van Dorn Tonnage 75 Year 1982 Shot Size 5 oz. Clamp Style Toggle Additional Machine Specs Platen Size 23.75" X 21.5" Tie Bar 16" 13.5" Daylight 22.25" HKO Yes Freight to locations outside our immediate area can be arranged. Please inquire. For over 25 years our technology company has been helping companies address cost and quality problems or ramp up production to meet unexpected surges in demand. Our engineers work with companies to redesign products. From the simplest plastic components to sophisticated industrial devices. Then we assemble them in our 20,000 square foot facility in the Research Triangle, North Carolina. You can also inquire about the following machine/automation and facility items to be listed: Drill Press Lathes Grinders Vertical Mills Vertical ... moreand Horizontal Band Saw Bar Feeder Scara Robots Cartesian Robots Thermotron Test Chambers. Hi-Bay Lighting with Ballast and Housing(bulbs can be supplied)
Large lot of Industrial Pail and Lid Molds 1 Gallon to 5 Gallon
Large lot of single and double cavity Industrial Pail and Lid molds from 1 Gallon to 6 Gallons. Many different styles of lids to go with these buckets. These molds are manufactured in Canada. Italy, And the USA. Molds can be inspected and seen running at our Plant in Miami Florida. Under no circumstances can these molds be sold or parts manufactured anywhere in North America.
Graham Engineering knockout ejector pin 14" long 5/8 dia
Graham Engineering wheel machine knock out pin ejector pin. 14 inches long Good condition. Please ask all questions before buying. 314.429-5544 Daniel@kcltd.com 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-14322f054b5-0xf7-
Cincinnati Milacron 3-533-0068G PCB Circuit Board Rev. A
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Up for sale is a used Cincinnati Milacron 3-533-0068G PCB Circuit Board Revision A This board is an Excellent take out from a machine with a working control. Guaranteed. Expedited and Next day shipping are available upon request at buyers expense. On Jun-24-13 at 18:15:32 PDT. Seller added the following information:
1995 Van Dorn Demag 400 Ton, 30 oz. Model 40-HT-30 Injection Molding Machine
Machine Details ~ Item 8642 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 400 Ton. 30 oz. Injection Molding Machine, Manufacturer: Van Dorn Demag, Model: Year: 400-HT-30. 1995. Features: Tonnage: 400 | Shot Size: 30 oz. | Clamp Stroke: 26' | Distance Between Tie Bars: 27.99" x 27.99" | Platen Size: 42" x 42" | Max Mold Opening: 25.98" | Max Daylight: 54.01" | Ejector Stroke: 6' | Control: Pathfinder 2500 | Options: Core Pull. Robot Interface, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment ... moreis FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specifications. Ab
1997 Van Dorn Demag 88 Ton, 4.5 oz Model ERGOtech 80-200 Compact Molding Machine
Machine Details ~ Item 8640& 8641 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 88 Ton. 4.5 oz. Injection Molding Machine, Manufacturer: Van Dorn Demag, Model: Year: ERGOtech 80-200 Compact. 1997. Features: Tonnage: 88 US Tons | Shot Size: TBD | Max Mold Opening Stroke: 17.72" | Min Mold Height: 9.84" | Max Daylight: 27.56" | Platen Size: 23.23" x 22.83" | Distance Between Tiebars: 15.75" x 15.75" | Ejector Stroke: 5.9" | Voltage: 460/3/60 | Control: NC4, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with ... moreorder. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify
2000 NISSEI 198 Ton, 10 oz. Model FN4000 Injection Molding Machine
Machine Details ~ Item 8634 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 198 Ton. 10 oz. Injection Molding Machine, Manufacturer: NISSEI, Model: Year: FN4000. 2000. Features: Clamp Force: 198 US Tons | Shot Size: 10 oz. | Min Mold Thickness: 9.8” | Max Open Daylight: 37.4” | Tiebar Spacing: 20.9” x 20.9” | Platen Size: 30.3” x 30.3” | Ejector Stroke: 4.3” | Control: 9300T | Options: Core Pull. Robot Interface, Quick Mold Change System, High Speed Accumulator | Includes: Spare 4 oz. Screw& Barrel, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with ... moreorder. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to ver
Axxicon P002104/09 CBA010EA00 HC Cutting Bush
Item Number: US-088-G1.2H Original Axxicon HC Cutting Bush. For any questions before buying this particular item. Please call us at +1978-345-8001. Check out my!
Axxicon P000712/04 Sprue Bush
Item#US-088-F1.2G) Original Axxicon CI Sprue Bush. Note: There are multiple quantities of this item. So you may not receive the one in the picture. For any questions before buying this particular item. Please call us at +1978-345-8001. Check out my!
Nissei Electric Vertical Injection Molding Machine 2007
Very Clean like new machine with only 2800 hours. For more information call 908-707-9907
Husky Gammaflux 9500 Temperature Controller, 42 Zone
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Husky- Gammaflux 9500 control unit. Have three units available. In crates. Never used. 42 zone Temp controllers. They are in mint condition.
1999 60 ton J60ELII JSW All-Electric Injection Molder
60 US ton JSW for sale. Details below: Normal 0 false false false EN-US X-NONE X-NONE Ton(US Tonnage) 60 Ton Shot Size(Oz) 2.0 oz Year: 1999 Make: JSW Model: J60ELII Control: Syscom 1000 Between Bars: 12.2 in x 12.2 in Platen size: 18.5 in x 18.5 in Clamp Stroke: 9.84 in Clamp: Toggle Max Daylight: 21.651 in Min Daylight: 6.299 in Weight: 3.2 US tons a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14322fa71e7-0x100-
720 ton LG Injection Molding Machines
2) 720 ton LG Injection molders available. 1999 sister machines with very little use. 102 oz. shot size. 1100 ton. 162.2 oz sister machine available also. Normal 0 false false false EN-US X-NONE X-NONE
LOT 3 FAST HEAT ASSORTED MD03F D714F BAND HEATER 1200W 500W D303803
Product Specifications. Brand: FAST HEAT, Condition: Used, Model: ASSORTED MD03F D714F, Weight: 2.85 lbs, Dimensions: 8.75 x 5.25 x 4.75 in, SKU: D303803, Category: Miscellaneous, Additional Notes: BAND HEATER 1200W 500W, Product Photos. $45 USD We always offer combined shipping discounts for multiple items. Final combined shipping rates will depend on item weight and dimensions. We can send a combined invoice for items purchased within(1) week. If we cannot send a combined invoice. We will still honour our combined shipping discount. These discounts will be reflected on your additional invoice. We ship our items within 1 to 2 business days of receiving payment. We can ship through express or overnight UPS service at buyer's expense. Our daily shipping cut-off is 3:00PM Eastern Time. We only ship through UPS. Collect shipping must be ... morethrough your UPS account. If the item is to be shipped on a skid please contact us for a competitive shipping quote. You may choose to have your shipment picked up as well. We will palletize. Strap and shrink wrap your freight item. A handling fee of $20.00 per skid will be added to your eBay invoice. We offer a 7 day courtesy holding period for our clients but may incur storage fees after 7 days. INTERNATIONAL BUYERS: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. For shipping inquiries. Please contact customer support at: 1.800.583.9813. Bid with confidence. We put customer satisfaction as our#1 priority. We pride ourselves on our ability to resolve issues and offer hassle-free refunds! All our items are guaranteed to be as pictured in the listing. And in working condition, unless specified otherwise. Our titles and description may contain inaccurate information, so please refer to pictures to determine condition and specifications of an item. If you receive an i
Arburg Injection Molding Machine 750-210-320
This Arburg Injection Molding Machine is being sold AS-IS for Parts. It was working just one week ago until it was moved within a shop and hooked up to the power incorrectly causing the pump to lock up after being run in reverse. The pump has been removed for inspection and is included in the sale. I would prefer to sell the whole machine at first. Alternatively I will make separate listings for main components. Local P/U is preferred so please plan your own shipping arrangements. I can load onto delivery truck for free or deliver to Southern Cal for a reasonable charge. The below specifications are shamelessly copied from other sources and may be in error. Specifications Clamping Force: 83 Tons Platens Size: 19.25" x 19.25" Tie Bars Spacing: 12.5" x 12.5" Injector Screw Diameter: 40 mm Shot Size: 4.9 Oz to MACHINE MODEL ... more320-750 Manufacturer. ARBURG. Year. Location. Technical Details Clamping Force. 750kN. Distance Between Tie Bars(H X V) 320 x 320 mm. Mould Opening Stroke. 375mm. Mould Height Minimum- Maximum. 250mm. Ejector Stroke. 150mm. Ejector Force. 26.7kN. Screw Diameter- LD Ratio. 35mm. Injection Pressure. 1500 bar. Stroke Volume/ Weight(PS) 121g. Injection Rate. 150cc/sec. Injection Stroke. 150mm. Screw Speed Max. RPM. 520. Main Motor/ Heater kW. 15kW- 5.5kW. Oil Tank Capacity. 220 Liters. Dimensions L X W X H- Weight. 4.3 x 1.85 x 2.00.
2004 JSW 200-TON ALL-ELECTRIC PLASTIC INJECTION MOLDING MACHINE
JSW 200-TON ALL-ELECTRIC PLASTIC INJECTION MOLDING MACHINE. MODEL J200ELIII, 9.6 OZ(272 GRAMS) 1.81" 46 MM) SCREW, 2004, SYSCOM 2000 CONTROLS, 20.87" x 20.87" 530 MM x 530 MM) TIE BAR SPACING, 30.71" x 30.71" 720 MM x 720MM) PLATENS, 37" 940 MM) MAX. DAYLIGHT, 8.66" 220 MM) MIN. MOLD HEIGHT, 19.68" 500 MM) MAX. MOLD HEIGHT, 17.32" 440 MM) CLAMP STROKE, 5.11" 130 MM) EJECTION STROKE, DIMS: 18.11'L x 4.53'W x 6.2'H, WEIGHT: 17,820 LBS. OPTIONS INCLUDE ELECTRICAL CONNECTIONS FOR CORE PULL, AIR EJECT, SPI ROBOT INTERFACE ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-14322fb33d0-0xdc-
1992 FORTUNE 275-TON PLASTIC INJECTION MOLDING MACHINE
FORTUNE 275-TON PLASTIC INJECTION MOLDING MACHINE. MODEL EURO 250, 25.4 OZ(720 GRAMS) 1992, V7000 CONTROLS, 24.02" x 24.02" 610 MM x 610 MM) TBS, 32.28" x 32.28" 820 MM x 820 MM) PLATENS, 44.49" 1130 MM) MAX. DAYLIGHT, DIMS: 270"L x 59"W x 87"H, WEIGHT: 21,200 LBS.
Goldstar 350 Ton Injection Molding Machine, 35.5 oz Shot 23929
in titles& description Name: Goldstar 350 Ton Injection Molding Machine. 35.5 oz Shot, Ticket# 23929, Model: IDE350EN, Capacity: 346.5 Ton. 35.5 Oz Shot, Size: Platen: 37.8 x 37.8, Manufacturer: GOLDSTAR, Item located at: Hatfield. PA, Serial# N95350E4347, Year: 1995, Terms& Condition: As is where is, Selling Price: $20000.00 Description: Ton 346.5 Brand Goldstar Model# IDE350EN Serial# N95350E4347 Manufacture Year 1995 Shot Size 35.5 Clamp Style Ram Platen Size 37.8 x 37.8 Dist. Bet. Tie Bars 26.3 x 26.3 Daylight Min/Max 11.8"49.2" Material Run Mostly commodity/ some engineering Barrel and Screw Condition fair/good Shifts Run avg. 5 shift Hydraulic Knock Off Yes Corepull Yes Is Machine Running No Condition of Machine Good Controls Hicom 200 Voltage 460 Cycle Times 30 to 240 sec. Hours Unknown | | Copyright 1990 to 2013 ... moreA&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
Injection Molding Feeder Maguire
For auction is 1 Maguire Color Feeder for an injection molding machine. I have not tested but last known it works. Buyer pays for frieght will be calculated at end of auction. Email if you have any questions.
Husky 330 Ton Injection Molding Machine
Model: LX300-P70/60 E85 Year: 1995 Tonage: 330 Shot Size: 38.78 Controller: Siemens Options: HKO/ Core Pull Platen Size: 40.8" x 40.8" Distance Between Tie Bars: 26.3" x 28.3" Clamp Stroke: Maximum Daylight: 59" Minimum Mold Height: 11.8" Maximum Mold Height: 29.5" Machine Weight: 56.000 lbs
Van Dorn 48oz injection Unit
Van Dorn 48oz inline Injection Unit removed from 1994 model 400HT molding machine(Machine had larger unit installed) Very Good condition. Running when removed, complete unit including barrel, screw, main casting, injection ram and screw motor etc. Barrel end cap is missing. Buyer to arrange shipping listed as local pickup Thanks
VAN DORN 35mm CHECK RING VALVE TIP & FRONT SEAT ONLY
VAN DORN 35MM CHECK RING VALVE TIP AND FRONT SEAT WHAT YOU SEE. IS WHAT YOU GET! THERE ARE NO DEFECTS OF ANY KIND. THESE ARE IN GREAT SHAPE! Check out my other items! Money back for defective items or those not as described. Please contact us before returning items for a refund. You must return the item in the same condition as it was received. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. International Buyers– Please Note: I USE THE GLOBAL SHIPPING PROGRAM. IF YOUR COUNTRY ISN'T PARTICIPATING. THEN THE FOLLOWING ... moreAPPLIES TO YOU. Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Customs fees are normally charged by the shipping company or collected when you pick the item up. These fees are not additional shipping charges. We won't under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. Based on our limited research. The part should be compatible with the listed model(s) May also fit other models/years that have minor variations such as color. Please carefully review the photos and/or check with your local dealer to make sure you are buying the correct part.
Boy 22A Injection Molding Machine
This is a 2004 Boy 22A injection molding machine. It is fully functional and has been verified operational by a local molding machine technician. It is being sold as is where is. We purchased the machine with the intent of molding some of our components but the opportunity never panned out. We will pay for the crating fee but the buyer is responsible for organizing and paying for freight shipping. Item is located in Phoenix AZ. If you have any questions. Please ask before you bid. Item is sold as is with no warranty.
100 Ton Engel Injection Molding Machine E-Motion 440/100
100 Ton Engel e-motion Tie-barless Injection molding machine 440/100 Voltage: 460. Injection capacity: 7.10 Oz. 40mm: Screw We currently have two of these machines in stock at our warehouse in Hialeah florida. Both machines are to equipped with Engel ERC 43/1-E Robots.
Injection molding thermal control D-M-E
For auction is D- M- E Thermal control unit for heating molds 5 control zones are in unit Stand is included. Shipping will be frieght paid by buyer. Will be calculated upon end of auction if you have any questions please email
Conair 4 Ton Water Chiller
4 Ton conair water cooled chiller model number MPW-4. Serial number: 55788. Voltage: 480 volts 60 hz 3 phase. Unit has been tested and is fully operational
75 Ton Newbury Injection Molding Machine
1984 Newbury Injection Molding Machine 75 Ton Model Number: H-5-75-BRS. Serial number: 12709175BS84. Voltage: 240 Volts. Injection Capacity: 5 Oz. Controller: Relay. Distance between Tie Bars: 15 x 12.25 inches. Clamps Stroke: 10 Inches. Maximum Day Light: 29 Inches. Minimum Mold Thickness: 14.88. Maximum Mold Thickens: 20 inches. Machine is in good condition and currently under power and can be viewed at our warehouse in Hialeah Florida.
Uniloy 350R2 Blow Molder 5 Head 8" Centers Programmed PLC Cooling Bed & Trimmer
Uniloy 350R2 S/N 2666 Converted to R3 Shot 5 Head 8" Centers Dash 1 Style Head Parison Programmed- Hunkar 311 Stand Alone Controllers Ram Down Style Blow Pins with Adjustable Stroke Cylinders 44" x 15" Opening Clamp with Double Rotac- 6 Clevis- 4) 2" Tie Bars 3.5" Air Cooled Extruder Package Converted to R3 Shot Capacity-1100 Grams 30HP R2 Hydraulic Power Pack 100HP Baldor AC Variable Frequency Drive Package PLC Direct PLC Control with Touch Screen Interface Rotacs Swing Arm Assembly Standard Cooling Bed 10026 Trimmer with Guarding Frame Upgrade Any upgrades or improvements to the machine can be quoted seperately based on your specific needs. This machine is NOT currently under power but can be viewed in our New Castle. PA facility This machine does not include molds. Trim tooling, head tooling or shear tooling. New ... moremolds can be quoted seperately. All used equipment is sold as is where is with no warranty expressed or implied. I will provide a rigging and shipping quote to the winning bidder only. Terms: Net prior to shipment
2005 Engel Injection Molding Machine 110 Ton
2005 Engel Injection Molding Machine Model VC330/110 TECH PRO. Injection Capacity: 113g cm3. Platen dimensions: 740 x 680 mm. Max Daylight: 800mm. Min Mold thickness: 300mm. Maximum Mold Thickness: 500mm. Motor: 18.5 kw Screw diameter: 30 mm. Machine is in excellent condition and fully operational.
Magnum Venus Plastech MVP Megaject RTM Pro Resin Closed Molding Machine
MVP Megaject RTM Pro Resin Molding Machine Here we have a Resin Molding Machine in very good used condition. This unit was recently purchased from a local National Laboratory which was removing excess. Injection molding equipment. By incorporating programmable logic controls in the fully automatic production system. The MegajectTM RTM-Pro offers many standard features unavailable on other models. Automatic functions are stored and easily accessed through the touch-sensitive display. Which provides full control of the injection and flushing cycles. All of the machines operational features are pre-programmable and monitored. The MegajectTM RTM-Pro ensures accurate repeatability of the molding process and the capability to interface with other production equipment such as an automatic press or manipulator. Specification& Standard Features ... moreAutomatic Controls. Featuring up to 30 individual pre-programmable molding menus. Each with the following variables: injection volume. Injection flow, injection pressure, resin temperature, catalyst start and finish percentages. Turbo Autosprue interface& post injection mix-head& Autosprue air-purge. Flush& drying cycle. Precision fluid pumps. Guaranteeing accurate output between 150 gm/min& 12 kg/min. Resin/Catalyst pump system with adjustable ratio between 200:1 and 22:1(automatic adjustment with PCR) In-built 20 ltr. catalyst container(with non-intrusive level sensing. In-built 20 ltr. Non-pressurized polypropylene solvent tank SP3. with unique submersible solvent pump& non-intrusive level sensing. Compact injection head(with automatic control of resin& catalyst recirculation and low post-injection mix wastage(38 cc) Mold Pressure Guard(MPG) providing accurate injection pressure control. Full color graphical touch-sensitive display screen providing readjustment of machine settings in each menu. Multi-level user interface with password protection. Catalyst flow/Injection pressure monitoring and parameter reading. Multi-channel PID control loop for resi
IMS Gaylord Tilt Cart
IMS Gaylord tilter cart. Unit is fully operational.
150 Ton Cincinnati Injection molding machine 8 oz
1985 Cincinnati 150 Ton Injection Molding Machine. 8 Ounce Injection Capacity. PCIII Controller. Toggle Clamp with 13 Inch Stroke. Minimum Mold Thickness 6 Inches. Maximum Mold Thickness 16 Inches. Distance Between Tie Bars 18 Inches. Maximum Daylight 29 Inches. Platen Size 27 x 26. Machine is currently under power and in fully operational it can be viewed at our warehouse in Hialeah Florida. It can also be viewed on youtube. a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-14325cf6fef-0xe9-
110 Ton Van Dorn Injection Molding Machine 6.5oz
1993 Van Dorn Plastic injection Molding Machine Voltage 480. CRT Pathfinder Controll. 6.5 Oz Injection Capacity Platen size 27 x 28 Inches. Space Between Tie-bars 17.25 x 14.80. Clamp Stroke 18.5 Inches. Ejector Stroke 4 Inches. Max daylight 26.5 Inches Min Day Light 8 Inches. Machine is currently under power and in perfect working order.
2001 Wittmann Model W621 3-Axis Full Servo Robot
Machine Details ~ Item 8320 Summary Specifications Category: Robot Sub-Category: Full Servo Robot Description: 3-Axis Full Servo Robot, Manufacturer: Wittmann, Model: Year: W621. 2001. Features: Horizontal Stroke(Z-Axis) 118.1" | Vertical Stroke(Y-Axis) 47.2" | Kick Stroke(X-Axis) 21.7" | Max Handling Load: 22 lbs. | Volts: 3X 480 | For IMM Locking Force Tons: 40-400 | S/N: 5186, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment ... moredescriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specifications. Absolute Machinery Corporation Standards Terms and Conditions Apply to this Offer- these are included as an attachment to this file. Powered by The free
2007 Wittmann Model W733 3-Axis Robot
Machine Details ~ Item 8582 Summary Specifications Category: Robot Sub-Category: Robot Description: 3-Axis Robot, Manufacturer: Wittmann, Model: Year: W733. 2007. Features: Horizontal Stroke(Z-Axis) 98.42" | Vertical Stroke(Y-Axis) 55.11" | Kick Stroke(X-Axis) 35.43" | Max Handling Load: 33 lbs. | High Speed Y-Axis | 1 Vac | 3 Grippers | Injection Molding Machine Clamping Force: 200-650 Tons | Control: R7 TeachBox, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive ... moreof any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specifications. Absolute Machinery Corporation Standards Terms and Conditions Apply to this Offer- these are included as an attachme
Mitsubishi 270 Ton Injection Molding Machine Model: 270MJII-17 Serial: 3S24D124
Mitsubishi 270 Ton Injection Molding Machine. Min. Mold Height- 240 mm. Closing Stroke- 760 mm. Distance Between Tie Bars- 560 x 560 mm. Platen Size- 820x 820 mm. Daylight- 1000 mm. Injection Size- 21 oz. Machine Manufactured in July 1997. Click on this link below or search mitsubishi 270 ton injection machine on ebay to watch video of this machine running. Price $22.000 We will load onto your truck for free. We have two of these machines both of which are in great condition and were running parts when we disconnected them to remove from facility.
2000 Yushin Model Netliner VN-EA-150D Servo Robot
Machine Details ~ Item 8636 Summary Specifications Category: Robot Sub-Category: Servo Robot Description: Netliner VN-EA-150D Servo Robot, Manufacturer: Yushin, Model: Year: VN-EA-150D. 2000. Features: Traverse Stroke: 1500mm | Kick Stroke: 500mm Main& Sub Arm | Vertical Stroke: 800mm Main Arm& 850mm Sub Arm | Max Handling Load: 11 lbs. Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their ... moreaccuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specifications. Absolute Machinery Corporation Standards Terms and Conditions Apply to this Offer- these are included as an attachment to this file. Powered by The free listing tool. List your items fast and easy and ma
2012 Chen Hsong 2200 Ton, 520 oz. Model JM2000-SVP/2 Injection Molding Machine
Machine Details ~ Item 8524 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 2.200 Ton, 520 oz. Injection Molding Machine, Manufacturer: Chen Hsong, Model: Year: JM2000-SVP/2. 2012. Features: Tonnage: 2200 US | Shot Size: 520 oz. | Screw Diameter: 6.4" | Mold Opening Stroke: 66.9" | Distance Between Tie Bars: 70.8" x 62.9" | Platen Size: 104.7" x 96.8" | Min/Max Mold Thickness: 35.4"70.8" | Max Daylight: 137.7" | Injection Stroke: 29.5" | Max Injection Pressure: 20.325 psi | Ejector Stroke: 16.5" | Voltage: 240/460-3-60 | Control: B&R Smart Mold | Includes: Dual Core Pull, Dual Air Blow, Robot Interface, Servo Drive | Hours: ONLY 3,428, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this ... moreequipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salesper
1999 Van Dorn Demag 700 Ton, 80 oz. Model 700-HP-4300 Injection Molding Machine
Machine Details ~ Item 8649 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 700 Ton. 80 oz. Injection Molding Machine, Manufacturer: Van Dorn Demag, Model: Year: 700-HP-4300. 1999. Features: Wide Platen | Tonnage: 700 | Shot Size: 80 oz. | Screw Diameter: 3.54' | Clamp Stroke: 44' | Platen Size: 53.5' x 53.5' | Tie Bar Distance: 45' x 36.5' | Max Daylight: 72.75' | Min Mold Thickness: 16' | Injection Stroke: 14.62' | Injection Pressure: 20.000 psi | Ejector Stroke: 6" | Voltage: 460/3/60 | Control: Pathfinder 5000 | Options: Core Pull, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank ... moreyou for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment qu
1987 VAN DORN 500-TON PLASTIC INJECTION MOLDING MACHINE
VAN DORN 500-TON PLASTIC INJECTION MOLDING MACHINE. MODEL 500H-RS-60F-CV-VV, 60 OZ(1700 GRAMS) 1987, CRT-B CONTROLS, 32.5" 826MM) x 32.5" 826MM) TBS, 47" 1194MM) x 47" 1194MM) PLATEN, 68" 1727MM) MAX DAYLIGHT, 75 HP MOTOR, CORE PULL, DIM: 30' 9.1M) L x 6.7' 2M) W x 9.8' 3M) H, WEIGHT: 54,800 LBS. 24,857 KILOS) MACHINE HAS A CRACKED BARREL, NEW SCREW AND SCREW TIP.
ENGEL - Vertical Injection Molder - 175 Ton - Accepting Offers
If you have any questions or would like to make an offer please call(513)932-7379 and ask for Rodney. Engel Vertical Rubber Injection Machine Serial# ES430/175 30384-97 3 phase 230 volt 150 amp 175 ton Screw 25 mm Shot size 430 Platen size 24 inches long x 19 inches wide Manufactured in 1997 The unit is currently under power. Please feel free to come and inspect the unit. Spare Parts Included: One screw· One Body plunger· Three Plunger heads· One Plunger injector· Seal kits· Six solid State relays Details: Shipping is the responsibility of the buyer. The item is sold as is where is. There is no warranty written. Expressed, or implied. All sales are final. If you have any questions or would like to make an offer please call(513)932-7379 and ask for Rodney.
1987 VAN DORN 700-TON PLASTIC INJECTION MOLDING MACHINE
VAN DORN 700-TON PLASTIC INJECTION MOLDING MACHINE. MODEL 700H-RS-CV-125F, 125 OZ(3.5 KILOS) 1987, CRT-B CONTROLS, 36.5" x 36.5" 927 MM x 927 MM) TBS, 53.5" x 53.5" 1359 MM x 1359 MM) PLATENS, 72.75" 1848 MM) MAX. DAYLIGHT, 44" 1118 MM) CLAMP STROKE, 75 + 50 HP MOTORS, DIM: 33.7'L x 7.4'W x 10'H, WEIGHT: 82,000 LBS. VIDEO AVAILABLE UPON REQUEST.
1993 FS260 Nissei Injection Molding Machines
2) 1993 Nissei FS260 Injection Molders. 32 oz. NC9000G Controls, Very Good Condition.
INCOE Hot Runner Sprue Control, Heater, and Nozzle - Plug & Go System
INCOE 240V- 2400 Watts- 10 amps- Plug& Go Hot Tip Sprue System. Includes control and sprue tip with heater and wire. Needs a new corset but was taken from service working. The cord was removed because it was worn out. Please email any questions. Thanks
Arburg Injection Molder 221-75-350 + REMCOR Chiller
Injection molding machine- Arburg 225-75-350- 40 ton molding machines. 1.5 ounce shot size in polystyrene, Polytronica controller, water manifold, Lincoln auto lube for clamp, very low hours(about 10k) 220v 3 phase machine, new in 1991. Remcor Chiller, please email any questions. Arburg Allrounder Injection Molding Machine in great condition. And includes all manuals, electrical schematics, and documentation.I used this machine for about a year and have decided to sell it for a good price. These are very reliable and hard working machines. It can hold an 8X8 mold frame/ base, and includes a water manifold which can be connected right to the chiller- no need for external water source. The Arburg Polytronica is one of the most reliable controllers built, and controller has been disconnected from the main machines so it is ready for transport.This ... moreis too good a deal to pass up- Email me any questions- Please note: I am not a machinery dealer so the buyer MUST make all arrangements to have the equipment Picked-up/ shipped/ transported/ whatever. This includes getting a forklift on site to move the machines. I do not have a forklift or any way to lift the machines. The chiller is on wheels. And the molding press is on 4X4 blocks as risers. I have a pallet jack to move it around so the rest is up to the buyer. The buyer must contact and make arrangements for pick up date and times with me also. This is part of a small part time job so I will have to make myself available at times that work for both of us. Having said all that, this is why the machines and all the chiller are being sold for a really good price. Given the age and condition, this deal is a score for a small shop or as an addition to a growing shop. Info on the Arburg Molding Machine- 221-75-350 models Approximately 10.000 hours 230 Volts 1991 Polytronica Controller Machine Model# 221-75-350 Clamping Pressure. 38.5 tons Mold Opening stroke. max. 2.36" to 7.87" Mold Height.min. 5.91" to 11.81" Daylight.
IPC Silicone Injection Molding Machine TTM-HS2V 12 Station
This is a nice used Illinois precision TTM-HS2V that was removed from service last year. The machine was in good working condition when removed and comes with the silicone feeding station as well as a non-working chiller. Please see photos. What you see is what you will receive. Please call Levi with any question at 541-261-5687 Please call for shipping. Buyer is to arrange but I will assist. Posted with
Yushin VNII - EA -2000S All Servo Robots
2) Yushin model VNII-EA-2000S all servo robots for sale complete with Yushin pendant controllers. One manufactured late 1999. The other 2000.
Technomagnete set of Magnetic Platens
Set of barely used Technomagnete Magnetic platens. Ideal use on a 720 ton molding machine. They came off a machine with 38" square between the tiebars and only had 7000 running hours.
VAN DOR 75 TON MODEL 75 RS 5F 2596/ PLASTIC INJECTION MOLDING MACHINE (OC196)
For Sale! VAN DOR 75 TON MODEL 75 RS 5F 2596/ PLASTIC INJECTION MOLDING MACHINE(OC196) Specification: Year: 1987• Tonnage: 75• Shot Size: 5 oz. Clamp Style: Toggle• Platen Size: 23.75" x 21.5" Tie Bar: 16" x 13.6" Daylight: 22.25" Max General Information: You can preview Machine at our warehouse in Santa Ana. California-Call to schedule an appointment- Payment can be made by: Certified checks. Company Checks, Wire transfer, direct deposit, Credit Card or Paypal. Call or email for more payment details* We have freight assistance via: LTL. Full Trucks, Flat Bed and local delivery. Call or email to request a quote- All purchases less than 150 lbs will ship UPS. Fedex or USP S. FREE LOADING AND PACKAGING IN ALL PURCHASES) CALL. TEXT OR EMAIL WITH QUESTIONS. 714)658-5390* SE HABLA ESPAÑOL* Visit our eBay store A GLOBE ... moreENTERPRISES INC. COMPANY www.orangecountymachinery.com Ph# Fax#
Engel Molding Controller Screen
This is a working unit just removed cables were removed properly. Posted with
Cito Manifold, Blue, 4-4, 1/4" Inlet, 3/8" Inlet
Cito Manifold Blue. 4-4 1/4" Inlet 3/8" Inlet Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. ... moreAll items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. PLEASE NOTE: There is a $1
ERICO CADWELL PCT1H1H WIRE MOLD 6CONC #25 W/M **XLNT**
ERICO CADWELD PGT1H1H WIRE MOLD. 6 CONC, 25 W/M EXCELLENT CONDITION PHOTO IS ACTUAL ITEM P2C1 NJP WARRANTY All equipment comes with a 6 month warranty. Equipment is guaranteed to be received as described in the listing or a full refund will be given upon return. SHIPPING Most items will be shipped the next business day after payment has cleared. The listed shipping and handling charges are for the continental US and include all Packaging. Handling, and Insurance fees/costs for regular orders. If equipment is needed to be shipped the same day. Evenings, weekends, or holidays, an additional fee will be added and we must be contacted by phone or email/message. We recommend you contact us directly for all international or freight shipments. Feel free to contact us if you are purchasing multiple items to see if your purchase qualifies for shipping ... morediscounts. PAYMENT Payment can be made with Paypal. Credit Card, Cashier's Check, Company Check, Personal Check, or Wire Transfer. Company Checks, Personal Checks and Wire Transfers must clear before equipment will be shipped. COMPANY PROFILE Remancenter buys and sells industrial electronic equipment for use in the manufacturing world. Our desire is to have the lowest prices of any remanufacturing company on the world wide web. Our primary goal is to satisfy the customer while remaining a profitable growing business. CONTACT INFORMATION 336-394-4600(Office) 336-394-4603(Fax) 336-340-4552(Emergency) Email) On Oct-25-12 at 19:50:09 PDT. Seller added the following information:
Hot Runner Controller from Japan
7 USED HOT RUNNER CONTROLLERS FOR SALE! MULTIPLE ZONES! ASK FOR BULK OR SINGLE PRICE!
55 Ton Vertical Battenfeld Injection Molding Machine, Model BA500/125 Vertical
55 Ton Vertical Battenfeld Injection Molding Machine. Model BA500/125 Vertical Description: Used Vertical Battenfeld Injection Molding Machine. Model BA500/125 Vertical Clamp, Vertical Injection Unit, 55 Ton. Stock#6661. Subject to prior sale. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false ... morefalse false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This is used machinery sold“As Is. There are no warranties of any kind. Bidder/Buyer assumes all risks. Is solely responsible for the safe use of this machine and agrees to fully indemnify Arlington. By bidding on this machine, you agree that if you are the successful bidder. The full Terms and Conditions on the following website will apply Buyer is responsible for setting up shipping
STERLING BLOW MOLD MACHINE- New 2000
Item Information Item Name: STERLING BLOW MOLD MACHINE- New 2000 Item# 10928 Price/Each: $750.000.00 Year: 2000 Brand Name: STERLING DAVIS Model: 6.0 x 28:1 Serial# Z7167 Asset Tag: Item Location City: Yemassee State: South Carolina Zip Code: 29945 Country: United States Additional Item Information Voltage: Amperage: Machine Hours: Horse Power: of Axis: Under Power: Machine Height: Machine Length: Machine Width: Machine Weight: Machine Condition: In Dealer Inventory: New: Warranty: Entered For ID: Item Description STERLING DAVIS-STANDARD ACCUMULATOR HEAD BLOW MOLDER DUAL 15 POUND(6.8 KG/ 9.1 LITER) HEADS ON 36 INCH CENTERS Serial Number: Z7167 Model Number: 6.0 x 28:1 Extr/Single 30Lb head Condition: Used- Good Machine Height: 20' Machine Length: 40' Machine Width: 15' Controller: Maco 6000/ Davis standard interface Includes a ... more3DX(Deformable Die) Berg Chilling Systems Inc. Model: CT-634-1(5)x2(25) Serial# W01868B-BC1-0706 Year: 2006 Material Handling System Make: Mould-tek Industries Model: XLCP-220.6BL Serial# X1139 Year: 2006 55 Gallon closed head mold 55 Gallon Open head mold Our extruder has a nice feature added called a 3DX deformable die. This allows the molder to add or subtract material in the parison on the parting line or 90� from the parting line. Everything is in working condition and worked very well for us. Contact Us About This Machine Should you have questions. Please contact David Drozdenko at 860-484-4449 PAYMENT& SHIPPING: Payment Details: We will email you an invoice for the full amount owed. Including shipping. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction, will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: We can ship LTL. Partial or Full, Van or Flatbed, Double Drop, and load into Containers for export! Freight costs to be quoted at time of sale. All freight costs to be paid by the purchaser prior to Pickup. Please contact the sales Rep above for a ship
Lot of (4) NC-8000 Control Cards for Nissei Injection Molding Machine
Equipment Details Summary Specifications Category: Injection Molding Machine Sub-Category: Parts Description: Lot of(4) Control Cards for Nissei Injection Molding Machine Manufacturer: Nissei, Model: FS360S100ASE Year: 1982, Features: Lot of(4) NC-8000 Control Cards from a 400 Ton Nissei Injection Molding Machine(S/N: S36D053) POS-02 | TP-1B107 | no. 63981, A0P-50D | TP-1C204 | no. AD3561, D02-01 | TP-1A104 | no. 47068, CPU-02 | TP-1C101 | no. 280082, Our Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales ... moreand is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specifications. Absolute Machinery Corporation Standards Terms and Conditions Apply to this Offer- these are included
Rotational Molding Machine
We have a 1970s McNeil Rotational Molding Machine for sale. We currently have and run 3 McNeil 800's and 2 of these 1500 machines. We purchased two of these 1500 machines from Pelican and only put one of them together due to deciding we didn't need the capacity or have room for the second machine. We have the same machine running that can be inspected as the one that's for sale that's not assembled. The cooling chamber was in poor shape and we always rebuild them so they are new when we install a machine. We can supply the drawings for welding a cooling chamber as well as refer the guy that just installed the last machine. There may be a few parts when assembling the machine that will need to be replaced but it shouldn't be too excessive. We invested about 10K in totally refurbishing. Assembling and replacing any parts ... morethat were questionable on our running machine to the point the machine is like new. We paid 25,000 for each machine and are willing to consider reasonable offers. Please contact me with questions. We can load onto your truck and the machine is located in Utah. Thx Jason McNeil 1500-88. 3) Arm Turret Rotational Molder, 88" Inch Swing Diameter, 1500 lbs. Max Load, Straight Arms, Relay One(1) Mid 70's McNeil 1500-88 Rotomolders Control: Turret Style Rotational Molder Number Of Arms 3 Arm Type(3) Straight Arms Max Swing Diameter 88" Max Load 1500 lbs. Controller Relay Logic Electrical Temperature Control Panel Electrical Requirements 480v Natural Gas Burner Photos available Price: $28.500.00
Mini Load Hopper w/ Outside Air Filter, Sensor, and Vortex Stand
Selling an Mini Load Hopper w/ Outside Air Filter. Sensor, and Vortex Stand as USED and AS IS. We are an Injection Molding company that has stopped production. We are located in Carol Stream. IL. If you are local you are more than welcome to pick up the item. We are selling more parts if interested. For more information on this product or the other items we have, please contact me through ebay. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1432ca5520e-0xfe-
Maguire Blender Parts Plastic extrusion molding Flow valves Sensor etc
Maguire Blender These parts are from the stock room of plastic extrusion company that is closed. Devices with cylinders are plastic flow valves of two different types. We installed different valves for low or high flowing materials. All of these valves are expected to be usable. There is one sensor as shown. There were several Maguire blenders in the plant from the small MB type up to larger 6 bin units. All parts are usable and may or may not be new. Here are Parts for a Maguire Blender for Plastic extrusion or molding. WE ship fast! We are happy to combine items if it will reduce the shipping cost. Shipping price is quoted for the US lower 50. We will quote all other shipping. You may return any of our items for a refund within 10 days of the auction ending date. Less all shipping if you are not satisfied.
100 Ton Engel Plastic Injection Molding Machine
1979 100 ton 5 oz. Engel plastic injection molding machine. Model number ES300/100. Serial#1185/100/79. Was operational when taken out of service.
1993 Nissei 500 Ton Injection Molding Machine
1993 Nissei 500 ton injection molding machine. NC9000G controller. 80 oz, very low hours.
Desktop plastic injection molding machine 66M 2/3oz Crystal Alloy
For sale: used Desktop plastic injection molding machine 66M 2/3oz Crystal Alloy brand. Also comes with bags of plastic pellets and some molds that have been machined/used. With the molds at least you will see how it is supposed to work so you can make your own.
VAN DORN DEMAG CONTROL / OPERATOR PANEL / KEYPAD PATHFINDER 2500 (S12-1-51P)
This is a VAN DORN DEMAG CONTROL/ OPERATOR PANEL/ KEYPAD PATHFINDER 2500. TESTED WORKING. NO POWER SUPPLY INCLUDED. GUARANTEED TO BE IN WORKING ORDER UPON ARRIVAL PLEASE DISREGARD THE NUMBERS IN PARENTHESES AT THE END OF THE DESCRIPTION IN THE TITLE. THESE ARE FOR OUR INTERNAL REFERENCE. WE OFFER A 14 DAY RIGHT OF RETURN. We accept Paypal. Payment must be made within 3 days of item ending. We take great care in packaging your products and use only the best materials. We usually ship USPS for smaller domestic shipments. For larger items. We use FedEx or UPS. We also ship freight for very large and heavy items. In order to give you the lowest possible rate, we combine shipping charges on multiple orders. WE SPECIALIZE IN INTERNATIONAL SHIPPING. International Shipping rates will be higher than the rate posted here. Please contact us for international ... morerates. All items are guaranteed to be in proper working order upon arrival. Unless specified otherwise in the description. We have been in the Industrial and manufacturing supply field for over 7 years and take pride in providing our customers with THE BEST CUSTOMER SERVICE. We do our best to describe everything. If you have questions. Please feel free to email us. We strive hard to make sure our customers are happy. We use the appropriate packaging materials that are necessary when packaging your items. We hope that you will find your purchase satisfying. If by chance there is an issue with your item, please let us know right away. We are always ready to address any concern. Powered by
ESSEX INJECTION MOLDING MACHINE BARREL HOPPER SM11-AB
Essex injection molding machine barrel hopper. This mounts directly on top the inject barrel. Made from cast aluminum. It has one repair as can be seen in the photo. Approximately 1-5/8" bottom openiing. Very hard to find part. This fits the Essex Model SM11-AB. Fits in a machine very similar to the one in the last photo. Machine not included in sale for referance only. Powered by The free listing tool. List your items fast and easy and manage your active items.
Working Cincinnati Milacron 250 Ton Injection Molding Machine (Video included)
This listing is for 1 Cincinnati Milacron 250 Ton Injection Molding Machine Working 1988 Cincinnati Milacron 250 Ton Injection Molding Machine Air Blast Core Full Vista Hydraiulic 250-15 No. 3902A1V88-29 115-60HZ/110-50HZ Buyer will be responsible for pick up. If you have any other questions contact me! Video: If you have any questions. Message me!
MOKON 1 TON CHILLER PLASTIC INJECTION MOLDING
Just in! Mokon 1 Ton Chiller. This unit was built in 2000. 1 HP Pump Motor. 230 Volts 3 Phase Chiller. Fully Tested and works GREAT. Chiller comes with Manual and Supply and Return fittings. This unit is will be skidded banded and shrink warped for free. Will crate for an additional fee.
Thermal Care hot oil mold temperature controller
1½ hp leak-proof vertical multi-stage pump mounted in reservoir• 6 kW heating capacity• 125°F to 575°F set point range• Stainless steel heat exchanger• Oil reservoir: 3½ gallons(holding) 4 gallons(expansion) Pump: 14gpm/ 32PSI• Dimensions: L: 34" x W: 13" x H: 31" Wt: 275# Although this is a used machine. We have checked it for proper function. Please allow 2 weeks for run-off. TERMS: Cash before shipment. That is cash. Cashier's check, or approved company check for full amount prior to removal from sold location(unless otherwise noted) In the event that a deposit has been requested and approved. The deposit will be to hold the machine for no more than 30 days from receipt of the deposit and is non-refundable. All equipment is FOB on floor from sold location(loading& shipping is customer's responsibility) ... moreunless otherwise stated. Loading of IMM's from PPM Southlake. TX location: up to 399-ton is $500, 400 up to 850-ton is $1,500, over 850-ton will be quoted in addition to machine quoted amount. Loading of IMM's from all other locations must be quoted in addition to machine quoted amount. Equipment that requires crating can be quoted upon request. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is/Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment in conformity to all Federal, State and local Government Safety Standards and all Industrial Sta
2002 VAN DORN 300 Ton, 40.3 oz. Model 300HT-1920 Injection Molding Machine
Machine Details ~ Item 8543& 8544 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 300 Ton. 40.3 oz. Injection Molding Machine, Manufacturer: Van Dorn, Model: Year: 300 HT1920. 2002. Features: Tonnage: 300 | Shot Size: 40.3 oz. | Screw Diameter: 70mm | Injection Stroke: 12.4" | Max Clamp Stroke: 24" | Max Open Daylight: 49" | Min Mold Thickness: 8" | Platen Size: 37" x 37" | Distance Between Tie Bars: 25" x 25" | Tie Bar Diameter: 4.25" | Injection Pressure: 22.916 psi | Ejector Stroke: 8.3" | Voltage: 460/3/60 | Control: Pathfinder 3000 | Options: Core Pull, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, ... moreFax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment
500 Ton, 54 oz. Cincinnati Milacron VH500-54 Injection Mold Machine (1992)
Machine Details ~ Item 8197 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 500 Ton. 54 oz. Injection Mold Machine, Manufacturer: Cincinnati Milacron, Model: Year: VH500-54. 1992. Features: Clamp Force: 500 Tons | Shot Size: 54 oz. | Screw Diameter: 80mm | Max Daylight: 55.1" | Max/Min Mold Thickness: 40.1"15" | Platen Size: 48" x 48" | Tie Bar Spacing: 34.3" x 34.3" | Ejector Stroke: 5.8" | Control: CAMAC VEL | Options: Core Pull. Robot Interface, Air Eject, HKO, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with ... moreorder. And all equipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to ver
220 Ton, 8 oz. Cincinnati Milacron VT-220 Injection Molding Machine (1993)
Machine Details ~ Item 8338 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 220 Ton. 8 oz. Injection Molding Machine, Manufacturer: Cincinnati Milacron, Model: VT-220, Features: Tonnage: 220 | Shot Size: 8 oz. | Tiebar Spacing: 21.26" x 19.29" | Platen Size: 30.91" x 33.15" | Min/Max Mold Thickness: 5.98"21.96" | Max Daylight: 41.65" | Ejector Stroke: 5.12" | Volts: 460 | Control: Camac VEL | Options: Core Pull, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold ... morelocation unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specifications. Absolute Machinery Corporation St
1997 FERROMATIK MILACRON 250 Ton, 35 oz. Injection Molding Machine
Machine Details ~ Item 8221 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 250 Ton. 35 oz. Injection Molding Machine, Manufacturer: FERROMATIK MILACRON, Model: K250-S, Features: Tonnage: 250 | Shot Size: 35 oz. | Mold Opening Stroke: 33.46" | Distance Between Tie Bars: 24.80" x 24.80" | Platen Size: 38.19" x 38.19" | Mold Installation Height: 13.78" | Max Daylight: 47.24" | Dims: 25.7 ft x 7 ft x 7.9 ft | Weight: 37.478lbs. Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from ... moresold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specifications. Absolute Machinery Corpor
1996 Husky 300 Ton, 28.6 oz. Injection Molding Machine
Machine Details ~ Item 8438 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 300 Ton. 28.6 Oz. Injection Manufacturer: Husky, Model: G300-RS70/60, Features: Tonnage: 300 | Shot Size: 28.6 oz | Screw Diameter: 60mm | Clamp Stroke: 22.6" | Platen Size(HxV) 40.78" x 41.85" | Dist. Between Tie Bars: 28.3" x 28.3" | Daylight Open(Max) 48.2" | Ejector Stroke: 5.9" | Volts: 460 | Control: Xycom 9960 | Includes: Air Blow, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location ... moreunless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specifications. Absolute Machinery Corporation Standa
300 Ton, 28.6 oz. Husky G300-RS70/60 Injection Molding Machine (1998)
Machine Details ~ Item 8456 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 300 Ton. 28.6 Oz. Injection Manufacturer: Husky, Model: G300-RS70/60, Features: Tonnage: 300 | Shot Size: 28.6 oz | Screw Diameter: 60mm | Clamp Stroke: 22.6" | Platen Size(HxV) 40.78" x 41.85" | Dist. Between Tie Bars: 28.3" x 28.3" | Daylight Open(Max) 48.2" | Ejector Stroke: 5.9" | Volts: 460 | Control: Xycom 9960, View Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all equipment is FOB on floor from sold location unless otherwise ... morestated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specifications. Absolute Machinery Corporation Standards Terms and Co
Thermal forming plastic plaque and sign machine.
Thermal forming plastic plaque. Tag and or sign machine. Machine is 220 volt and heats the plastic up to 1/4" thick and then pulls vacuum over supplied letters. Patterns, of your choice. Machine is 4 feet wide, 39 in. tall and 26 in. deep overall. Not including the dimensions of the material supply cabinet. Only slightly used and in good condition and about a 2006 model. Unit includes several plaque type molds and several letters and numbers. Thanks for looking!
d-m-e thermal control unit smart series
Used nice shape in working condition. D-M-E smart series 2 slot thermal control unit. Includes one blank cover seen in third picture. Has some scuffs and scratches from use.
ADVANTAGE "SENTRA" DUAL ZONE MOLD TEMPERATURE CONTROLLER
Normal.dotm 0 0 1 73 419 Plastic System 3 1 514 12.0 0 false 18 pt 18 pt 0 0 false false false(13) ADVANTAGE“SENTRA” DUAL ZONE TEMPERATURE CONTROLLERS. TWO INDEPENDENT UNITS EACH WITH ELECTRICAL PLUG MOUNTED ON A SINGLE CART WITH CASTERS. STAINLESS STEEL CABINET. PUMP ¾ HP; 9 KW HEATER. 440/3/60. ALL ARE IN EXCELLENT CONDITION. PRICE IS FOR EACH DUAL ZONE UNIT. MANUAL INCLUDED. AGE FROM 1998-2002. USED IN A CLEAN ROOM MEDICAL MOLDER WITH REGULAR CALIBRATION. QUESTIONS: donpsi@mindspring.com 770 331 1942 FOB ATLANTA. GA BUYER IS RESPONSIBLE FOR FREIGHT TO DESTINATION FROM ZIP 30080 Normal.dotm 0 0 1 5 Plastic System 1 1 6 12.0 0 false 18 pt 18 pt 0 0 false false false
32 oz Vandorn Injection Unit
One assembled 32oz injection unit for Van Dorn HT series. We believe it fits 300 ton and up rails. We purchased to repair our 300 ton HT. Only ended up using the screw motor. Unit appears to be in very good shape. Part we used worked well. Unit sold as is.
Tool Temp TT157E/MP794 mold temperature controller
Make: Tool Temp Model: TT157E/MP794 Voltage: 480 Pump capacity: 0.75kW(1hp) Heating poer: 9kW Temperature range: up to 90ºC Metric display Although this is used equipment. We have checked it for proper function. TERMS: Cash before shipment. That is cash. Cashier's check, or approved company check for full amount prior to removal from sold location(unless otherwise noted) In the event that a deposit has been requested and approved. The deposit will be to hold the machine for no more than 30 days from receipt of the deposit and is non-refundable. All equipment is FOB on floor from sold location(loading& shipping is customer's responsibility) unless otherwise stated. Loading of IMM's from PPM Southlake. TX location: up to 399-ton is $500, 400 up to 850-ton is $1,500, over 850-ton will be quoted in addition to machine quoted ... moreamount. Loading of IMM's from all other locations must be quoted in addition to machine quoted amount. Equipment that requires crating can be quoted upon request. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is/Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment in conformity to all Federal, State and local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. Al
Conair Tempro TC1-DI Thermolator
Conair Tempro• Mold temperature controller• FLA:12.7• Horsepower: 3/4• Heater: 9kw• Cooling solenoid size: 1/4" Operating temperature range: 32°-250°F Although this is used equipment. We have checked it for proper function. TERMS: Cash before shipment. That is cash. Cashier's check, or approved company check for full amount prior to removal from sold location(unless otherwise noted) In the event that a deposit has been requested and approved. The deposit will be to hold the machine for no more than 30 days from receipt of the deposit and is non-refundable. All equipment is FOB on floor from sold location(loading& shipping is customer's responsibility) unless otherwise stated. Loading of IMM's from PPM Southlake. TX location: up to 399-ton is $500, 400 up to 850-ton is $1,500, over 850-ton will be quoted in addition ... moreto machine quoted amount. Loading of IMM's from all other locations must be quoted in addition to machine quoted amount. Equipment that requires crating can be quoted upon request. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is/Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment in conformity to all Federal, State and local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment
Novatec storage bin 32-445-60
Used Novatec storage bin model 32-445-60• Capacity: 60 cu. ft. Take-off: single position. 2½" probe• Drain spout• Hi/Low view windows• Gaylord legs(52" clearance from bottom of take-off box) Lid with cut-out for receiver TERMS: Cash before shipment. That is cash. Cashier's check, or approved company check for full amount prior to removal from sold location(unless otherwise noted) In the event that a deposit has been requested and approved. The deposit will be to hold the machine for no more than 30 days from receipt of the deposit and is non-refundable. All equipment is FOB on floor from sold location(loading& shipping is customer's responsibility) unless otherwise stated. Loading of IMM's from PPM Southlake. TX location: up to 399-ton is $500, 400 up to 850-ton is $1,500, over 850-ton will be quoted in addition ... moreto machine quoted amount. Loading of IMM's from all other locations must be quoted in addition to machine quoted amount. Equipment that requires crating can be quoted upon request. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is/Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment in conformity to all Federal, State and local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on
Stainless Steel for plastic Injection molder molding machine (Hopper)
Top opening outside diameter: 9 1/2" ASA rotatable Flange- Outside diameter: 5 1/2" 2) Airtac MAL-U25X50 Cylinder If you have any questions please contact us prior to bidding. Phone: 805) 648-3300, Normal business hours are 8am- 5pm PST Monday through Friday, Recycled Goods is located at: 3820 N. Ventura Avenue. Ventura, CA 93001, PID 45557 ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1436e478133-0xeb-
1995 Van Dorn Demag 400 Ton, 24.8oz. Model 400-HT-24.8 Injection Molding Machine
Machine Details ~ Item 8643 Summary Specifications Category: Injection Molding Machinery Sub-Category: Horizontal Injection Description: 400 Ton. 24.8 oz. Injection Molding Machine, Manufacturer: Van Dorn Demag, Model: Year: 400-HT-24.8. 1995. Features: Tonnage: 400 | Shot Size: 24.8 oz. | Clamp Stroke: 26' | Distance Between Tie Bars: 27.99" x 27.99" | Platen Size: 42" x 42" | Max Mold Opening: 25.98" | Max Daylight: 54.01" | Ejector Stroke: 6' | Control: Pathfinder 2500 | Options: Core Pull. Robot Interface, Our Entire Inventory: www.AbsoluteMachinery.com If you have any questions regarding this equipment or offer. Please don't hesitate to call our Sales Office at Tel: 508-792-4305, Fax: 508-792-9646. Thank you for your interest in this equipment. TERMS: Cash or Cashiers Check with order. And all ... moreequipment is FOB on floor from sold location unless otherwise stated. All equipment subject to prior sales and is exclusive of any government tax. Equipment descriptions are intended only as a guide and their accuracy is not guaranteed. CONDITIONS: Item(s) are sold"As Is. Where Is" unless other arrangements have been made and conveyed in writing. There are no warranties which extend beyond the description on the face hereof; quotation subject to change without notice. All agreements and/or contracts made by sales person are subject to approval. EQUIPMENT SAFETY: It is the buyer's/user's responsibility to provide proper safety devices and equipment to safeguard persons from harm resulting from any particular use. Operation or set-up, and to adequately safeguard the equipment conform to all Federal, State and Local Government Safety Standards and all Industrial Standards. INDEMNIFICATION: Buyer/User agrees to indemnify and hold harmless Seller and Salespersons from any and all claims or liabilities caused by or arising from the equipment on the face hereof. All equipment quoted is subject to prior sale. It is purchaser's responsibility to verify specificatio
1985 Battenfeld Automatic Injection Molding Machine BA460
Rigging and Hauling not included in price. That is the responsibility of the buyer. Payment Details: We will email you an invoice for the full amount owed. Please do not pay until you have received our invoice. Items not paid within 10 days from the end of auction. Will be re-listed. Payments by check will be held for 4 days until check clears. Shipping Policy: Contact us@ 920-882-8777 to set up the shipping and time truck will be here to load. Buyer will be responsible for all scheduling. Paperwork, claims and any or all damages incurred in transit. They must use own account. We will palatalize if needed and load on truck of buyers choice.
TMC 250E INJECTION MOLDER MOLDING MACHINE 30 KW MOTOR
TMC 250E INJECTION MOLDER MOLDING MACHINE 30 KW MOTOR Click Images to Enlarge ​TMC 250E INJECTION MOLDER MOLDING MACHINE CLAMP FORCE: 2.500 kn MAX HYDRAULIC PRESSURE: 140 BAR HEATING POWER: 19.2 KW SERIAL NO: WJ11145 INJ VOLUME: 848 cm3 EX WORKS DATE: 1999.11.26 30 KW MOTOR 230/ 460 VOLTS 60 HZ 3 PHASE PLATEN SIZE: 32-1/4" x 33-1/2" DISTANCE BETWEEN BARS: 23" FRONT/ BACK DISTANCE BETWEEN BARS: 22" TOP/ BOTTOM SLIDING DOORS ARE BROKEN AS SHOWN IN PHOTOS MEASURES: 237" x 61" x 97" TALL APPROXIMATE WEIGHT: 24.000 LBS LOADING FEE: $200 ON FLATBED. PLEASE CALL FOR A CONTAINER LOADING QUOTE WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ... moreITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: Used andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items that require custom skid or custom crating. over 4'X4' We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items ove
Semi-Automatic Blow Molding Machine for 5 Gallon PET Bottles
For sale is a Semi-Automatic Blow Molding Machine for 5 Gallon PET Bottles. This machine can make PET Bottles from 3 Gallons- 5 Gallons. It is based off preforms. It has been tested and worked. It comes with one 5 Gallon mold included. The price includes also the heater unit for it. We bought this but never started the business, it is wrapped, and has parts replaced with FESTO brand name parts. Contact us if you have any questions. This item is very light, and can be easily moved with a pallet jack. It can be shipped in both open trailers, or dry van trailers.
Demag 100-310 Injection Molding Machine
Demag 100 Ton 3 oz barrel 5195 hrs 1994 In working order and under power Maximum daylight 29.53(in) Tie bar spacing 15.75 x 15.75(in) Max Ejector stroke 5.91(in) If you have any questions or would like additional pictures please feel free to ask. Buyer pays Shipping and Handling and for insurance. No overseas shipments. Payment is due within ten days. I prefer Cash or Business Check, but I will accept personal checks, money orders or cashier's checks, but shipping will be delayed for 10-20 days to allow time for them to clear. Opinion on colors, condition etc. varies. Please ask questions prior to auctions end. All items are sold as is. You are bidding on pre-owned items. I try to describe items accurately. Unit must be picked up within one week of the auctions ending. INDEMNIFICATION: Used Machines may not incorporate approved activating ... moremechanisms. Operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment. Including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines. And shall cooperate fully with Seller. Or Seller's agent in investigating and determining the cause of said accident.
Cincinnati Milacron VT300 Injection Molding Machine
Cincinnati Milacron 300 Ton 29 oz barrel 52.584 hours In working order and under power(has not run since 2009) Maximum daylight 42.13(in) Tie bar spacing 27.17 x 27.17(in) Min die height 6.10(in) Max Ejector stroke 5.8(in) If you have any questions or would like additional pictures please feel free to ask. Buyer pays Shipping and Handling and for insurance. No overseas shipments. Payment is due within ten days. I prefer Cash or Business Check, but I will accept personal checks, money orders or cashier's checks, but shipping will be delayed for 10-20 days to allow time for them to clear. Opinion on colors, condition etc. varies. Please ask questions prior to auctions end. All items are sold as is. You are bidding on pre-owned items. I try to describe items accurately. Unit must be picked up within one week of the auctions ending. INDEMNIFICATION: ... moreUsed Machines may not incorporate approved activating mechanisms. Operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment. Including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines. And shall cooperate fully with Seller. Or Seller's agent in investigating and determining the cause of said accident.
Cincinnati Milacron VH 250 Injection Molding Machine
Cincinnati Milacron 250 Ton 11 oz barrel 66.206 hours In working order and under power Maximum daylight 39.19(in) Tie bar spacing 22.05 x 22.05(in) Min die height 3.35(in) Max Ejector stroke 5.04(in) If you have any questions or would like additional pictures please feel free to ask. 800x600 Buyer pays Shipping and Handling and for insurance. No overseas shipments. Payment is due within ten days. I prefer Cash or Business Check, but I will accept personal checks, money orders or cashier's checks, but shipping will be delayed for 10-20 days to allow time for them to clear. Opinion on colors, condition etc. varies. Please ask questions prior to auctions end. All items are sold as is. You are bidding on pre-owned items. I try to describe items accurately. Unit must be picked up within one week of the auctions ending. INDEMNIFICATION: Used ... moreMachines may not incorporate approved activating mechanisms. Operator safety devices or safety guards as required by OSHA or otherwise. It is the user's responsibility that the said machines be so equipped and safeguarded to meet OSHA and any other requirements before placing such machinery into operation. User agrees to indemnify and hold Seller harmless of and from any and all claims or liabilities from accidents involving these machines caused by failure of user, his employees, or agent to follow instructions, warnings, or recommendations furnished by manufacturer, or Seller, or by failure of user to comply with Federal, State and Local laws applicable to such equipment. Including the Occupational Safety and Health Act of 1970. User shall notify Seller promptly after occurrence of any accident involving these machines. And shall cooperate fully with Seller. Or Seller's agent in investigating and determining the cause of said accident. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4
Gusmer Admiral Polyurethane 10/14 High Pressure Mixing Head L Style Polyol &ISO
This mixing head was used for 2 years and is in excellent condition. High-pressure foam mix heads for reliable. Cost-effective polyurethane processing. L-Style Mix Head Features: Optimum shot control. Variety of injector styles and sizes to fit your application. Adjustable cleanout piston stroke improves mixing efficiency. Standard on every mix head. Double cleanout piston seals for longer life. Recirculating color groove(optional) Special nozzle lengths available. Double L mix heads with two pour pistons for seating applications. High strength materials and seals designed for maximum life. Cleanout hydraulics separated from chemical block to minimize oil contamination. Laminar output flow for splash-free operation with open molds. Low cost repairs and seal changes available.
Lot of 1/4" Inlet Hoses for Manifold Coolant, Water, Air
Lot of 1/4" Inlet Hoses For Manifold Coolant. Water, Air Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Feel free to contact us by phone or email with any questions or concerns. Don't forget to take a look at our store for other great items you may be interested in! WE WILL 100% HELP YOU SET UP SHIPPING. PLEASE READ THE FOLLOWING VERY CAREFULLY. Fees- There is a $10.00 handling fee on large items and items that require special consideration to prepare for shipping. An 8% State of Illinois tax is charged for all Illinois residents winning bidders unless you have state tax ID. An additional $35/pallet fee is required for each pallet used on truck shipments. The cost of any item requiring crating shall be determined after the close of the auction and shall be dependent upon the type and size of the crate required. ... moreAll items must be shipped or picked up by the winning bidder within 30 days of the close of the auction or the winning bidder is deemed to have forfeited all monies paid to the seller and the item will be re-listed. Personal Checks are credited to the winning bidder's auction AFTER clearing the bank. All auction payments must be received within 7 days of the close of the auction. After the seventh day. A non-paying bidder alert will be filed and negative feedback left for the non-paying bidder and the item will be relisted. ALL ITEMS ARE SHIPPED: F.O.B. FROM DEKALB. IL 60115. We recommend the following Freight Carrier for all items requiring shipping: Small Business Transportation at 888-368-6022 x218(Gil Jimenez) All items shipped via truck will be strapped to a pallet but will NOT be crated. This information must be provided by the Buyer to any selected trucking/freight company. Delivery items are shipped before or on the Thursday following receipt and clearing of payment. Fine Print Winning bidder assumes all risks and liabilities with respect to each item purchased. Please submit any questions prior to bidding. All items are sold“AS PICTURED. PLEASE NOTE: There i
ASM Fico Injection Molding Vacuum Pump System w/ Tank
Just in from a local aerospace company sale is this used working pull.ASM Fico Injection Molding Vacuum Pump System w/ metal Tank as shown, looks to be in very fine condition( see images) LOCAL PICK-UP PERFERRED Winning bidder gets own shipping including quotes. Call the 800 number below for a fast free quote. we will add $50 for pallet/ wrap/ strap/ load on your truck. You will need to have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork completely filled out to the fax number below. Weight is Approx#200? Contact Manufacturer for exact weight Standard pallet 48X48x48 We will load with Forklift Semi Truck Accessible Pick-ups M-F 8am-2pm by apt. only Pick-up location: GWS Enterprizes 28220 Ave Crocker. 405 Valencia. CA. 91355(661) 702-0650 Fax(661) 313-4550 Cell CALL FOR FREE SHIPPING QUOTES(800) ... more323-5441 X1413. OR USE YOUR OWN FREIGHT COMPANY.
Shot Counter For Toshiba Machine Model ISE250N-17A
Shot Counter For Toshiba Machine Model ISE250N-17A Removed from a Toshiba injection molding machine in working order See photo for more information Complete assembly These items came off a retired Toshiba injection molding machine. Items were in working condition when removed from the machine. Toshiba machine model ISE250N-17A Machine serial number- 612112 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-1437168f137-0xfd-
Eaton Cutler-Hammer C25DNF340 40 AMP Coil Contactor (used)
Eaton Cutler-Hammer C25DNF340 40 AMP Coil Contactor(used) Removed from a Toshiba injection molding machine in working order. Catalog Number C25DNF340 See photo for more information This item came off a retired Toshiba injection molding machine. Item was in working condition when removed from the machine. Toshiba machine model ISE250N-17A Machine serial number- 612112 lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-1437168f14a-0xed-
Eaton Cutler-Hammer C25DND330 30 AMP Coil Contactor (used)
Eaton Cutler-Hammer C25DND330 30 AMP Coil Contactor(used) Removed from a Toshiba injection molding machine in working order. Catalog Number C25DND330 See photo for more information This item came off a retired Toshiba injection molding machine. Item was in working condition when removed from the machine. Toshiba machine model ISE250N-17A Machine serial number- 612112.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1437168f0c7-0xdf-