In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
1929.99
Buy It Now
Free Shipping
Condition: Used
Location: Bismarck, United States
Unit is in working order .Must have business address with forklift are loading dock for free shipping or pickup at freight center
$
115.18
Buy It Now
Free Shipping
Condition: New
Location: Canada
BRAND NEW No. 811A Quick-Opening Universal Die Head, Features:Exactly the same size and specification as Ridgid 97065, No. 811A Quick-Opening Universal ... moreDie Head. Attention: This dies head is NOT made by Ridgid.
$
850.00
Buy It Now
$450.00 Shipping
Condition: Used
Location: Chino Hills, United States
Ridgid pipe threader 535 V1 machine with universal die head, oil pump not working it makes bubbles. The machine does work forward & reverse, foot pedal. ... moreFree local pick up or shipping to the lower 48 states.
$
38.00
Buy It Now
$5.00 Shipping
Condition: Used
Location: Cornell, United States
Shelf E4 bin #4.
$
209.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Replaces Part Number: 97075. The Toledo Pipe Tools® 815A Die Head is for use with RIDGID® Universal Right-Hand Dies. This die head will fit compatible ... moreRIDGID® pipe threading machines. RIDGID® Marks are trademarks of RIDGID, Inc and are used for product identification purposes only.
$
77.99
Buy It Now
Free Shipping
Condition: New
Location: Perth Amboy, United States
VEVOR Drain Cable Sewer Cable 50Ft 3/8In Drain Cleaner Cable Auger Snake Pipe. VEVOR 370W Drain Cleaner 75ftx1/2in Solid-Core Drain Cleaning Cable w/ ... moreCutters. VEVOR Drain Cable Sewer Cable 75Ft 3/8In Drain Cleaning Cable Auger Snake Pipe.
$
4499.00
Buy It Now
$499.99 Shipping
Condition: Used
Location: Freehold, United States
Ridgid 535 Manual Chuck Pipe Threader This is a used unit in good working condition This is a self oiling machine and has a self oiling for head. This ... moreunit is currently set up to run 1-2” pipe but can also thread 1/2 to 3/4 as well with the change of the dies. This is a used threader and will show signs of its usage but it works as it should This machine will be freight shipped or can be picked up locally in the freehold NJ area. If you have any questions please ask
$
3499.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Steel Dragon Tools® (Reconditioned) RIDGID® 535 Version 1 Pipe Threader has been cleaned, repaired, and prepared for professional use. Each Steel ... moreDragon Tools® (Reconditioned) RIDGID® machine is disassembled, cleaned, inspected, painted, reassembled, and tested.
$
129.99
Buy It Now
$15.99 Shipping
Condition: New
Location: Canada
Right Hand, NPT, it is 100% the compatible with Ridgid 97065. Fits Ridgid Model 300 300A, 500, 500A, 535, 535A, 800, 801, 802 1822 Machines. Dies notincluded ... morebut available! Quality tools at an affordable price!
$
3799.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Steel Dragon Tools® (Reconditioned) RIDGID® 535 Version 1 Pipe Threader has been cleaned, repaired, and prepared for professional use. Each Steel ... moreDragon Tools® (Reconditioned) RIDGID® machine is disassembled, cleaned, inspected, painted, reassembled, and tested.
$
225.00
Buy It Now
Free Shipping
Condition: Used
Location: Beaver Falls, United States
Selling a Ridgid 815 universal die head. This mounts on a Ridgid model 300 and 535 threader. In good condition. Please see below for the mounting and ... moreother specifications: Manufacturer: Ridgid Mount type: carriage Cutters: 4 Capacity: 1"2" die size in the head: 1"2" Cutting teeth included: YES. Feel free to make us an offer. Thanks FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. THIS ITEM WILL BE WELL PACKAGED AND SHIPPED VIA UPS. LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. WE CAN ALSO TAKE A CREDIT CARD OVER THE PHONE OR IN PERSON. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
$
3150.00
Buy It Now
$250.00 Shipping
Condition: Seller refurbished
Location: Coldspring, United States
REFURBISHED by EASTEX TOOL LLC. RIDGID 535 PIPE THREADING MACHINE. SWITCH, INDICATOR BAR. WE HAVE SOLD HUNDREDS OF REFURBISHED THREADERS. REBUILT OIL ... morePUMP. MOTOR IS DISASSEMBLED, CLEANED AND INSPECTED.
$
3299.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
Steel Dragon Tools® (Reconditioned) RIDGID® 535 Version 1 Pipe Threader has been cleaned, repaired, and prepared for professional use. Each Steel Dragon ... moreTools® (Reconditioned) RIDGID® machine is disassembled, cleaned, inspected, painted, reassembled, and tested.
$
6999.99
Buy It Now
Free Shipping
Condition: Used
Location: Bismarck, United States
Must have business name and address with forklift are loading dock or pick up at freight Center for free shipping
$
4249.99
Buy It Now
$300.00 Shipping
Condition: Used
Location: Hallandale, United States
FLAT RATE FREIGHT TO THE LOWER 48 STATES. I am always happy to help. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION.
$
249.00
Buy It Now
$10.00 Shipping
Condition: Seller refurbished
Location: Summit Argo, United States
Used in very good condition Ridgid 815 Pipe self opening Threading Die Head with out dies. See pictures for a better look at the unit.
$
299.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Steel Dragon Tools® Reconditioned RIDGID® 811A Universal Self-Opening Die Head 97065 has been cleaned, repaired, and prepared for professional use. ... moreEach Steel Dragon Tools® Reconditioned RIDGID® tool is disassembled, cleaned, inspected, painted, reassembled and tested.
$
1999.99
Buy It Now
Condition: Used
Location: Middlebury, United States
Includes new jaws, rear chuck cap. 1/8"-2" Pipe and 1/4-2" Bolt Dies, and a collection of dies. BULLSEYE INDUSTRIAL SALES, LLC. Unless otherwise specifically ... moreagreed to in writing by. Prefer to pick it up yourself?.
$
1350.00
Buy It Now
$85.00 Shipping
Condition: Seller refurbished
Location: Coldspring, United States
RIDGID 141 RECEDING GEARED THREADER, 2 -1/2" - 4". WORKS WITH RIDGID 700,300, 535. CHECK OUT OUR OTHER RIDGID PIPE TOOLS AND THREADERS.
$
64.50
Buy It Now
$6.50 Shipping
Condition: New
Location: Ashton, United States
YOUR LOOKING AT A "NEW" SET OF FRONT CHUCK JAW INSERTS FOR A RIDGID PIPE THREADER MODELS 200, 300, 300A, 300 Compact, 400A, 500A, 535, 800, 801 Pipe Threaders. ... morePipe slipping when you go to ream it or thread it?.
$
19.50
Buy It Now
$6.50 Shipping
Condition: New
Location: United States
WE COMBINE SHIPPING. S0 CHECK OUT OUR OTHER ITEMS. FREE SHIPPING IF"BUY-IT-NOW" IS USED! THIS IS WITHIN THE 48 STATES(OR TO SOME PARTS OF CANADA) ... moreYOUR LOOKING AT A" NEW" DIE HEAD POST FOR A RIDGID PIPE THREADER MODELS 200. 300, 300A, 300 Compact, 400A, 500A, 535, 535A, 535M, 800, 801, 1215, 1822 Pipe Threaders. THIS IS FOR DIE HEADS 500A, 531B, 532B, 555, 811, 811A, 815, 815A, 842. Sometimes it happens when we are in a hurry. We drop the die head and it lands on the DIE POST breaking it off. It's annoying, but it's easy to replace. Drive the old one out from the back side and the new one in from the front side. Make sure the new one goes in at the same position as the old one. We see it all the time on used equipment! So why pay full price for a real Ridgid brand? THIS IS NOT A RIDGID BRAND. BUT WHO CARES WHEN YOU COMPARE THIS"NEW" UNIT TO A"NEW" RIDGID#59832 WHICH LISTS FOR $22.72 AT EPARTS.COM. THEN ADD ON SHIPPING COSTS! TO SEE THE COST OF A RIDGID#59832 DIE HEAD POST. CHECK OUT THIS LINK. NOT HERE! YOU CAN"BUY-IT-NOW" FOR ONLY $16.50! SAVING YOU $6.00+ OVER THE PRICE OF A NEW RIDGID UNIT. AT AN AUTHORIZED RIDGID PARTS SUPPLY COMPANY! WE ALSO HAVE GREENLEE 555. 854's& 855's ANS RIDGID BRAND PIPE THREADERS 300's, 1822's, 1224's, 535's, ETC. SO. PLEASE SEE OUR OTHER AUCTION ITEMS! Powered by On May-11-13 at 17:35:54 PDT. Seller added the following information:
$
3429.51
Buy It Now
Condition: Used
Location: Venice, United States
Die Head - 811A. Ridgid Threading Machine PM7887. Threading Machine. Horsepower - 1/2. Will there be a loading dock or forklift. Tested and runs without ... moreissue. Pipe Capacity - 1/8” to 2”. Video will open in a new window.
$
47.50
Buy It Now
$7.99 Shipping
Condition: New
Location: Jupiter, United States
New set of Berkley/Ridgid Universal Pipe Dies for #300, and #535, 1/4"- 3/8" NPT (R.H.) Hi-Speed. Ridgid Cat. Fits Ridgid Universal Die Head. Made in ... moreIsrael.
$
225.50
Buy It Now
$9.75 Shipping
Condition: New
Location: Ashton, United States
WE COMBINE SHIPPING. S0 CHECK OUT OUR OTHER ITEMS. S. FREE SHIPPING IF"BUY-IT-NOW" IS USED! THIS IS WITHIN THE 48 STATES(OR TO SOME PARTS OF ... moreCANADA) uareTradeAP6.0 YOUR LOOKING AT A" NEW" REAR CENTERING HEAD OR BACK PLATE FOR A RIDGID PIPE THREADER MODELS 300. 300A, 300 Compact, 535 Pipe Threaders. color may vary slightly from the picture) Doesn't take much to break the back plate on your Ridgid threader. We see it all the time on used equipment! So why pay full price for a real Ridgid brand? Also. Take close look at the pic's. this back plate has an improvement over RIDGID, it even has some convenient handle/tabs to help with closing and opening, as well as adding more strength to prevent future breaking! THIS IS NOT A RIDGID BRAND. BUT WHO CARES WHEN YOU COMPARE THIS"NEW" UNIT TO A"NEW" RIDGID#43735 WHICH LISTS FOR $120.29 AT EPARTS.COM. THEN ADD ON SHIPPING COSTS! TO SEE THE COST OF A RIDGID#43735 REAR CENTERING HEAD OR BACK PLATE. CHECK OUT THIS LINK. NOT HERE! YOU CAN"BUY-IT-NOW" FOR ONLY $89.50! INCLUDING FREE SHIPPING! SAVING YOU $30.00+ OVER THE PRICE OF A NEW RIDGID UNIT. AT AN AUTHORIZED RIDGID PARTS SUPPLY COMPANY! WE ALSO HAVE GREENLEE 555. 854's& 855's ANS RIDGID BRAND PIPE THREADERS 300's, 1822's, 1224's, 535's, ETC. SO. PLEASE SEE OUR OTHER AUCTION ITEMS! Powered by On May-11-13 at 17:35:54 PDT. Seller added the following information:
$
189.99
Buy It Now
Free Shipping
Condition: New
Location: Erie, United States
The Steel Dragon Tools® 815A Die Head is for use with RIDGID® Universal Right-Hand Dies and Steel Dragon Tools® Universal Right-Hand Dies. This die head ... morewill fit compatible RIDGID® and Steel Dragon Tools® pipe threading machines.
$
214.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Replaces Part Number: 97065. The Toledo Pipe Tools® 811A Universal Quick Opening Die Head will Quickly open with the open/close lever. The Toledo Pipe ... moreTools® 811A Die Head is for use with RIDGID® Universal Right-Hand Dies.
$
5599.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Steel Dragon Tools® (Reconditioned) RIDGID® 535A Version 3 Auto Chuck Pipe Threading Machine 84097 has been cleaned, repaired, and prepared for professional ... moreuse. Each Steel Dragon Tools® (Reconditioned) RIDGID® machine is disassembled, cleaned, inspected, painted, reassembled, and tested.
$
44.99
Buy It Now
Free Shipping
Condition: New
Location: Erie, United States
Steel Dragon Tools® 811A Die Head Rebuild Kit fits RIDGID® 300 535 Pipe Threading Machine. Replaces RIDGID ® Parts: 39970, 26957, 59832, 46520, 39860, ... moreand 39950. RIDGID® 300 Parts. RIDGID® Reconditioned.
$
3799.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Steel Dragon Tools® (Reconditioned) RIDGID® 535 Version 1 Pipe Threader has been cleaned, repaired, and prepared for professional use. Each Steel ... moreDragon Tools® (Reconditioned) RIDGID® machine is disassembled, cleaned, inspected, painted, reassembled, and tested.
$
185.46
Buy It Now
Free Shipping
Condition: New
Location: United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
$
249.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Steel Dragon Tools® Reconditioned RIDGID® 811 Universal Self-Opening Die Head 97065 has been cleaned, repaired, and prepared for professional use. ... moreAll Steel Dragon Tools® Reconditioned RIDGID® tools will work like new and feature a one (1) year warranty against manufacturer defects.
$
279.99
Buy It Now
Free Shipping
Condition: New
Location: Brentwood, United States
The ® 815A Die Head is for use with RIDGID® Universal Right-Hand Dies. This die head will fit compatible RIDGID® pipe threading machines. Fits RIDGID® ... moreUniversal Right-Hand Dies. Pipe Capacity: 1/8 in.
$
4699.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
Steel Dragon Tools® 811A Universal Quick-Opening Die Head. Steel Dragon Tools® (Reconditioned) RIDGID® 535 V3 Pipe Threader. Reconditioned RIDGID® 535 ... moreV3 Manual Chuck Pipe Threading Machine with Steel Dragon Tools® 811A Die Head and High Speed Steel Dies.
$
3299.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
Steel Dragon Tools® (Reconditioned) RIDGID® 535 Version 1 Pipe Threader has been cleaned, repaired, and prepared for professional use. Each Steel Dragon ... moreTools® (Reconditioned) RIDGID® machine is disassembled, cleaned, inspected, painted, reassembled, and tested.
$
4999.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Steel Dragon Tools® (Reconditioned) RIDGID® 535A Version 3 Auto Chuck Pipe Threading Machine 84097 has been cleaned, repaired, and prepared for professional ... moreuse. All Steel Dragon Tools® (Reconditioned) RIDGID® machines run like new and feature a one (1) year warranty against manufacturer defects.
$
2500.00
Buy It Now
Condition: Used
Location: Gonzales, United States
1/8" to 2" Pipe. 1/4" to 2" Bolt. 115 Volts. Item is used. Works fine. Do you have access to a forklift?. Jack Wilkerson Industrial Surplus, LLC.
$
1649.99
Buy It Now
Condition: Used
Location: Millersburg, United States
Has a newer 811A die head. Part Number 535. Pallet Racking. The handle is missing one lever. Our mission is to empower industries with the tools and solutions ... morethey need to thrive in a dynamic and ever-evolving marketplace.
$
12.99
Buy It Now
Free Shipping
Condition: New
Location: Erie, United States
Steel Dragon Tools® 39970 Die Head Clamp Lever compatible with RIDGID® 811A 97065 300 535 Pipe Threader. Replaces Ridgid® Part Number 39970. Replaces ... moreRIDGID® Part Number 39970. Fits 811A, 531 & 532 Die Head.
$
249.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Steel Dragon Tools® Reconditioned RIDGID® 811 Universal Self-Opening Die Head 97065 has been cleaned, repaired, and prepared for professional use. ... moreAll Steel Dragon Tools® Reconditioned RIDGID® tools will work like new and feature a one (1) year warranty against manufacturer defects.
$
300.99
Buy It Now
Free Shipping
Condition: New
Location: Auburn, United States
Replaces RIDGID Part Number: 97075. Replaces Part Number: 97075. The Toledo Pipe Tools® 815A Die Head is for use with RIDGID® Universal Right-Hand Dies. ... moreThis die head will fit compatible RIDGID® pipe threading machines.
$
3749.99
Buy It Now
$300.00 Shipping
Condition: Used
Location: Hallandale, United States
FLAT RATE FREIGHT TO THE LOWER 48 STATES. I am always happy to help.
$
8500.00
Buy It Now
$400.00 Shipping
Condition: Seller refurbished
Location: Coldspring, United States
EASTEX TOOL HAS REFURBISHED AND SOLD HUNDREDS OF THREADERS. CHECK OUT OUR OTHER RIDGID PIPE TOOLS AND THREADERS.
$
149.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Toledo Pipe Tools® is proud to give you alternative high quality hand held oiling sytem. Feel confident on the job site when threading your pipe knowing ... moreyou will always have the flow of oil needed to get high quality threads.
$
13.00
Buy It Now
Free Shipping
Condition: New
Location: Stoystown, United States
This die head clamp lever is a must-have accessory for the RIDGID 811A, 97065, 300, and 535 pipe threading machines. It is made of high-quality steel ... moreand is designed to securely hold the die head in place during operation.
$
1799.99
Buy It Now
Condition: Used
Location: Millersburg, United States
Ridgid 535 Power Pipe Threader. Part Number 535. Pallet Racking. On Rolling Stand. Lift Tables. It is neither inferred or implied that any item sold by ... moreArrow Industrial is a product authorized or in any way connected with any manufacturers displayed on our pages.
$
7499.00
Buy It Now
$500.00 Shipping
Condition: Used
Location: Bernardsville, United States
Here we have a Ridgid 1224 Pipe Threader for 1/2”-4” Pipe. Also included are the Ridgid 711 & 714 die heads with rolling stand.With questions call Alex.This ... moremachine is in great shape!!! It has a new cord, new foot pedal and barely used 2-1/2”-4” dies. You will receive exactly what’s pictured: nothing more — nothing less.Please check out our other listings for more Ridgid and Greenlee tools.
$
6299.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
Reconditioned RIDGID® 811A Universal Quick-Opening Die Head. Includes Reconditioned RIDGID® 811A universal quick-opening die head. Reconditioned RIDGID® ... more535 Manual Chuck V3 Pipe Threading Machine. For use with 816/817 semiautomatics, 815 Self-Opening, or 811A Quick-Opening Die Heads.
$
49.95
Buy It Now
$9.35 Shipping
Condition: New – Open box
Location: Bastrop, United States
This auction is for(1) Set of New Ridgid. 1/8" NPT, Universal, High Speed, Right Hand, Pipe Threading Dies, Thread Chasers for Alloy Steel, Catalog# ... more47735. These Dies are New Old Stock and in excellent condition. Here is you chance to get OEM Ridgid Dies at a fraction of what they cost retail. Thanks and good luck bidding. Wisconsin residents must pay 5.5% sales tax. Unless proof of exemption is provided.
$
144.99
Buy It Now
Free Shipping
Condition: New
Location: Staten Island, United States
Built with a new and improved plastic mold shell, this oiler is stronger and less prone to cracks, ensuring durability and longevity. The oil gun has ... morebeen upgraded with thicker gaskets, eliminating leaks and providing a seamless oiling experience.
$
3999.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
Steel Dragon Tools® (Reconditioned) RIDGID® 811A Universal Quick-Opening Die Heads. The Steel Dragon Tools® (Reconditioned) RIDGID® 535 Version 2 Pipe ... moreThreader has been cleaned, repaired, and prepared for professional use.
$
3199.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Steel Dragon Tools® (Reconditioned) RIDGID® 535 Version 1 Pipe Threader has been cleaned, repaired, and prepared for professional use. Each Steel ... moreDragon Tools® (Reconditioned) RIDGID® machine is disassembled, cleaned, inspected, painted, reassembled, and tested.
$
279.99
Buy It Now
Free Shipping
Condition: New
Location: Brentwood, United States
The ® 815A Die Head is for use with RIDGID® Universal Right-Hand Dies. This die head will fit compatible RIDGID® pipe threading machines. Fits RIDGID® ... moreUniversal Right-Hand Dies. Pipe Capacity: 1/8 in.
$
2500.00
Buy It Now
Condition: Used
Location: Whitsett, United States
THIS AUCTION IS FOR RIDGID 535 PIPE THREADING MACHINE! MACHINE CAN CUT 1/8 TO 2" NPT) PIPE THREADS ALSO BOLT SIZES BY JUST CHANGING DIES! MACHINE ... moreHAS CUT OFF TOOL. REAMER, OILER AND 3 DIES! ALL 3 DIES ARE 815 SELF OPENING. DIES THAT COMES WITH MACHINE HAS THREADER DIES TO CUT 1/4 TO 3/8 NPT. 1/2 TO 3/4 NPT& 1 TO 2 NPT. I GOT THIS MACHINE OUT OF A SMALL HARDWARE STORE THAT CLOSED! PLEASE CHECKOUT MY OTHER AUCTIONS! PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. I WILL LOAD FOR FREE ON YOUR TRUCK OR TRAILER. YOU CAN PICK UP FOR FREE OR BIDDER CAN ARRANGE SHIPPING. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
$
2299.99
Buy It Now
Free Shipping
Condition: Used
Location: Bismarck, United States
Unit is in working order .Must have business address with forklift are loading dock for free shippingRIDGID 535 THREADING MACHINE WITH RIDGID CART AND ... moreDIES INCLUDED (0 is "Used".2 dies only
$
3999.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
Steel Dragon Tools® (Reconditioned) RIDGID® 811A Universal Quick-Opening Die Heads. Includes Steel Dragon Tools® (Reconditioned) RIDGID® 811A Universal ... moreQuick-Opening Die Head. The Steel Dragon Tools® (Reconditioned) RIDGID® 535 Version 2 Pipe Threader has been cleaned, repaired, and prepared for professional use.
$
5099.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
Two (2) Steel Dragon Tools® (Reconditioned) RIDGID® 811A Universal Quick-Opening Die Heads. Includes RIDGID® 811A with Extra 811A & HSS Dies. Steel Dragon ... moreTools® (Reconditioned) RIDGID® 535 V3 Pipe Threader.
$
299.95
Buy It Now
Free Shipping
Condition: Used
Location: New Bedford, United States
LOT INCLUDES (12) SETS OF DIES. (7) OF THE SETS HAVE CHIPPED TEETH AS SHOWN IN PHOTOS. ALL DIES ARE MATCHING SETS. 1/8” RIDGID 535 NPT UNIVERSAL (#3 CHIPPED). ... more1/2” - 3/4” RIDGID NPT HS UNIVERSAL (#1 CHIPPED).
$
44.95
Buy It Now
Free Shipping
Condition: New
Location: Athens, United States
$
700.35
Buy It Now
Free Shipping
Condition: New
Location: Las Vegas, United States
R811 fits Reed’s 5301PD Power Drive and RIDGID® machine models 300, 535 and 1822. Geared Threading Dies: The R65 die is made for easier work with larger ... morepipe and in remote locations. Like other Reed chasers, the R65 is backed by Reed’s 113+ years of die-making experience, and is made in the USA.
$
55.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Coldspring, United States
CHECK OUT OUR OTHER RIDGID PIPE TOOLS AND THREADERS.
1 2 3 4 5 6 7 8
 In 

Former Listings  
 
RIDGID 535 PIPE THREADER MACHINE WITH 3 DIES HEADS 1/4 TO 2" NPT 815 DIES
THIS AUCTION IS FOR RIDGID 535 PIPE THREADING MACHINE! MACHINE CAN CUT 1/8 TO 2" NPT) PIPE THREADS ALSO BOLT SIZES BY JUST CHANGING DIES! MACHINE HAS CUT OFF TOOL. REAMER, OILER AND 3 DIES! ALL 3 DIES ARE 815 SELF OPENING. DIES THAT COMES WITH MACHINE HAS THREADER DIES TO CUT 1/4 TO 3/8 NPT. 1/2 TO 3/4 NPT& 1 TO 2 NPT. I GOT THIS MACHINE OUT OF A SMALL HARDWARE STORE THAT CLOSED! PLEASE CHECKOUT MY OTHER AUCTIONS! PLEASE EMAIL OR CALL 1-812-968-5230 IF YOU HAVE ANY QUESTIONS. I WILL LOAD FOR FREE ON YOUR TRUCK OR TRAILER. YOU CAN PICK UP FOR FREE OR BIDDER CAN ARRANGE SHIPPING. YOU BUY AS IS. BUYER PAYS SHIPPING. PLEASE CHECK OUT MY OTHER AUCTIONS. Powered by The free listing tool. List your items fast and easy and manage your active items.
Ridgid 161 Geared 4" - 6" Pipe Threader 36630 With Dies Drive Shaft 300 535 700
Ridgid 161 Geared 4" 6" Pipe Threader 36630 With Dies Drive Shaft 300 535 700 Genuine Ridgid 161 Geared Pipe Threader Buy With Confidence Fully Tested! 14-Day Money Back Guarantee! 1-Year Extra Warranty! Super Fast Free Shipping! Features: Threads 4" 4 1/2" 5" 5 1/2" and 6" pipe with one set of dies. Jaw clutch prevents jamming. Simple adjustment for tapered(NPT) or straight threads(NPSM) Cam-type work holder sets instantly. Fully enclosed gear housing. Also included is a set of threading dies. Non-Ridgid storage case, a Ridgid drive shaft of your choice, and many other extras. This Ridgid 161 geared die head shows very few signs of prior use. Everything moves and turns as smooth and tight as a well made Swiss watch. You will not find any slop or play anywhere on this bad boy! This die head has been kept ... moredry. Well oiled, and clean. There is no rust anywhere! The threading dies are in near perfect condion. Absolutley no breaks. Chips, or dings in any of the threading dies. This Ridgid 161 die head and all of the accessories are clean enough on the inside and outside you could eat your lunch off of them! Take a look at all of the photos and see if you agree. I personally inspected all of the gears inside the gear housing. All of the gears are sharp and none of the gears have any chipped or broken teeth. I also tested this die head threading 6 inch pipe and it works perfectly as it should. I am very confident and excited about this die head! This Ridgid 161 die head should give you several lifetimes of trouble-free service! I can not imagine anyone ever being able to wear out a Ridgid 161 die head in a single lifetime) This Ridgid 161 die head is built like a army tank! Ridgid's retail list price for a new 161 die head. Set of threading dies, and metal carrying case is $4,536.70. Also included is your choice of any 1 of the following drives: Ridgid 840 Universal Drive Shaft. This drive shaft fits and is designed for a Ridgid 300. 300 Compact, 400, 400A, 500, 500A, 535, 800, 801
RIDGID 4P-J RECEDING GEARED PIPE THREADER HEAD WITH 2 1/2" - 4" DIES 141 535 300
This auction is for a(1) Ridgid 4P-J Receding Geared Pipe Threader Head for threading 2-1/2" thru 4" NPT pipe. This threader is in excellent used condition. Before this listing, the threader was inspected, cleaned, greased and reassembled, it is perfect inside and out, apart from the normal chips and scratches in the paint it has no wear anywhere. The Dies are sharp and are in great shape no broken teeth or dings, show very little use. This threader is 8 Threads Per Inch NPT. A New Ridgid 141 Threader costs over $2200 + Shipping. This 4P-J is lighter and will do the same job while costing much less. The dies are very easy to change, they just pop in and out with no disassembly and if you damage one set you can still use the other sizes. Thanks and good luck bidding. Wisconsin resisdents must pay 5.5% sales tax. Unless proof of exemption ... moreis provided. PLEASE ASK FOR A SHIPPING QUOTE FOR ANYTHING OUTSIDE THE LOWER 48 STATES
18 Ridgid Universal Die Head Dies Ridgid 200-300-400-535 Pipe Threader Dies
Ridgid High Speed dies they are in unused condition they show cosmetic wear lite rust and pitting The teeth are all nice and sharp 1/4-3/8 NPT HS 1-2 NPT HS 1-1/4 7 UNC 1/2-3/4 NPT HS 1-1/2 6 UNC 1-1/4 7 UNC 1/2- 3/4 NPT HS 1/2- 3/4 NPT HS 1- 2 NPT HS 1 8 UNC 7/8 9 UNC 1- 2 NPT HS 1/2 13 UNC 5/8 11 UNC 1/2- 3/4 NPT HS 1-1/4 7 UNC 1-1/2 6 UNC 1-3/8 6 UNC
RIDGID 300 T2 PIPE THREADER 535 1822 THREADER DIES
SHIPPING PRICE WILL VARY DEPENDING ON LOCATION! You are looking at: Ridgid 300 pipe threader Ridgid 1452 clip-on tray Ridgid 1206 stand Ridgid 311 carriage Ridgid 360 cutter Ridgid 341 reamer Ridgid die head 811( 3 die heads) Ridgid oil bucket( new oil gun) Ridgid foot pedal switc h(new) Ridgid 4p-j threader( die head 2 1/2" one die is not in good condition} Ridgid ratchet assembly Ridgid 40-A( no legs) Ridgid no.2A/202 1/8"2" heavy duty Ridgid no.4-S 2"4" Ridgid spiral reamer Ridgid 12-r ratchet Ridgid die head 12-r 2"1 1/2" 1 1/4,1" 3/4" 1/2"new)1/4" 1/8"new) Ridgid no.65-R 1"2" G2-Groover Triple R specialty Ridgid aluminum 36" wrench Ridgid heavy duty aluminum 24" wrench end pipe wrench Ridgid heavy duty aluminum 18" wrench end pipe wrench Ridgid heavy ... moreduty aluminum 14" wrench end pipe wrench Ridgid strap wrench 2P 1/8"2" Ridgid no.132 Ridgid no.205 Ridgid no.15 Ridgid no.904 torque wrench 3" drive(new) graphite lumber crayons(new) irwin(new) Dewalt high performance bi-metal cutter(new) hackmaster cutter(2)new) nailed wood cutter(2) new) lenox cutter(2)new) Dewalt cordless swivel 14V Ridgid Quick-spin Pacific grinding wheel coast 6" 2) new) knot crimped wire wheels 4" 3)new) Fat Max 30"new) uvex safety eyewear(new) sperian laser safety eye wear(new) wells lamont size large premium work gloves(new) snap on gloves(new) snap on 3pc multi set(new) electric gloves(new) black gloves(new) oxy acety tanks with torch and hose isport case ITEM IS AS PICTURED CA! It will be known that you have read the following information on refunds. PLEASE MESSAGE ME ON EBAY INSTEAD ON E-MAILING ME. THANK YOU PAYMENTS: Payment will be due when item has ended. Payment through paypal is preferred. if you do not pay in 3 days the most item will be relisted and you will be given negative feedback. If you pay with a check you will have to wait 7 days for it to clear. RETURNS: NO RETURNS ON ITEMS. SO IF YOU HAVE ANY QUESTI
Ridgid 535 Pipe Threader - Very Nice - Works Great - Dies, Reamer, Oiler, Cutter
535 For Sale: 535 Pipe Threader Fantastic Shape- Works Great! Description: As you can see this is a really nice ridgid 535 pipe threader. It has the reamer, the oiler. The cutter and the 1"2" pipe die. Both the front and rear speed chucks work great. This is no entry level threader- it is a full featured and fully supported pipe threader from the name you trust! It comes with 5/8" teeth. But needs a new set of the universal die teeth so that you can thread 1" 2" pipe- the teeth are about $40-50 new! You can ussually find them right here on ebay! Shipping: You can come pick this up and I have a forklift if needed to load it up onto your trailer or into you pickup. If you need to have it shipped I will assist in getting it ready to ship. And can load it onto the shippers truck. The shipping weight will be approx 325lbs. ... moreThe pickup zip code is 97754. I can ship to most locations for $350. I typically use freightquote.com to arrange shipping. And you can get a quote from them. But you can use any carrier that you like. Call me with any questions you have- Jon 541-410-5658
RIDGID 535 POWER THREADER WITH 10 DIES -- USED
RIDGID 535 POWER THREADER- USED Thread size: 1/8-2 NPT, Voltage rating: 115 V, Frequency: 50/60 hz; Speed: 36 rpm, Power rating: 1/2 hp maximum; Large 1.75 gallon oil tray, 100% larger chip tray; Reamer: 5-flute cone. RH, 1/8-2 in, Generous top cover for keeping tools and fittings handy; Rear centering device: Cam-action. Turns with chuck, High clearance carriage; Speed chuck with rocker-action jaws centers and grips workpiece instantly, Can be used with geared threaders Models 141 and 161; Length gauge for quick. Accurate cut-off, Uses model 816/817 semi-automatic. Model 815A self-opening or model 811A quick-opening die heads, Switches: For/off/rev and integral safety foot switch; Oil pump: Self-priming gerotor oil pump; RH/LH combination reamer available, ALSO INCLUDES 10 DIES NO INTERNATIONAL SHIPPING NO RETURNS SELLER MUST CONTACT BUYER ... moreWITHIN 3 DAYS OF AUCTION END PAYMENT MUST BE MADE WITHIN 7 DAYS OF AUCTION END
Ridgid 535 pipe threading dies 5/16-24 thread, good used, complate, sharp
Set of 4 dies for Ridgid 535 pipe threading machine. 5/16-24 NF fine thread. In good used condition. Dies are marked 1-4. Probably fit other Ridgid machines as well. Came out of a Ridgid"Universal" threading die on a 535 machine. Any questions, please ask. Usually more than $50 a set a plumbing supply house, listed for 20% of new! A GREAT buy!
RIDGID 500 DIE HEAD W/O DIES FOR 1" PIPE MONO DIE HEAD FITS 535 OR 300 CARRIAGES
RIDGID 500 DIE HEAD W/O DIES FOR 1" PIPE MONO DIE HEAD FITS 535 OR 300 CARRIAGES Click Images to Enlarge Item Description Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 RIDGID#500 DIE HEAD Model: 500 Mono Die Head for 1" Pipe Fits on the Ridgid 535 or 300 Carriages. This item appears to be in good used condition. Refer to pictures for details. New, this item would cost over $360.00 each! Bid now& $ave! For other great deals on Construction Surplus items, Please check out our store! Our customers are our top priority; If you are not completely satisfied with your purchase or you feel like we deserve less than a 5 star rating. Please call us before leaving feedback. We are surplus equipment dealers with a wide range of products for sale. We are not experts in any particular item or category we advertise. ... moreWe do not have the ability or expertise to test equipment for functionality beyond plugging it in and describing what we observe as best as we can. All statements and configurations are made to the best of our ability and with the assumption the buyer is knowledgeable and proficient in the use of this type of equipment. We give descriptions from the manufacturer's website when available. These descriptions may or may not be entirely accurate of the product listed. Due to the nature of used and surplus items, we have no history of the equipment, nor do we offer any warranty or guarantees, unless otherwise stated in the description above. We intend that photographs are part of the description. We offer a 14 day money back or exchange– buyer pays return freight* Pictures are of the actual item. Unless a stock photo is added for reference and noted in the description. Please look closely at pictures. Only items shown are included. No accessories, software, and or manuals, etc. included unless stated in the description. Used items may have writing. Engraving, paint, etc. that may or may not be seen in the pictures. Customer satisfaction is our top priority! E-mails will be an
Ridgid 535 Pipe Threader Threading Machine w/ Dies Reamer Carriage Pedal
Paypal. Visa, Mastercard, American Express. In order to promote a great transaction please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. Standard shipping or local pickup is available. Please use the freight shipping calculator to the right to calculate freight shipping which only has the freight carrier's standard insurance. If you require your item to be fully insured for ... morethe freight shipment please email us indicating that so we can total your invoice with shipping and the additional insurance. PA State sales tax applies to all local pickups unless you have a tax exemption form with you at the time of pickup. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Ridgid 535 Pipe Threader Threading Machine w/ Dies Reamer Carriage Pedal DESCRIPTION: WE ALSO HAVE THIS ITEM FOR AUCTION THROUGH OUR AUCTION COMPANY'S WEBSITE. SO THIS ITEM WILL BE REMOVED FROM LISTING AFTER THE SALE. ~ Up for auction is a good working Ridgid 535 pipe threader threading machine with dies on a portable rolling stand. 115 volts. Single phase The freight shipping weight is 350lbs on a secured pallet. If picking up locally. We can load your vehicle with the forklifts. We palletize and/or load the freight trucks for free. Freight Shipping Calculator Fill out the fields below and press the orange button to get instant rates. Enter Your U.S. Zip Select Location Type Business with Dock or Forklift Business without Dock or Forklift Construction
RIDGID OOR PIPE THREADER DIES 1/2 & 3/4 W/RATCHET HEAD RIDGID 200 300 400 535
RIDGID OOR PIPE THREADER DIES 1/2& 3/4 W/RATCHET HEAD RIDGID 200 300 400 535
RIDGID PIPE THREADER R12 12R DIES 1/2 TO 2" W/EXTRAS RIDGID 200 300 400 535
EVERYTHING IS IN GREAT SHAPE OTHER THAN THE 1" DIE HAS CHIPS ON THE INSERTS 6-RIDGID DIES 1/2 TO 2" 2-RIDGID PIPE WRENCHES 1-RIDGID REAMER 1-RIDGID 4 WHEEL CUTTER 1-RIDGID MANUAL RATCHET HEAD SHIPS LOWER 48 ONLY THANKS
RIDGID MODEL 535 PIPE THREADER 1/8" - 2" PIPE, WITH DIE HEADS~DIES~ROLLING CART
rigid pipe threading machine with wheels and stand. Chip tray built- in oil pump with 1/2" 2" 3mm- 50mm pipe capacity 115 v 1ph, 50/ 60 hz, 15amp reversable universal motor with for/ off/ rev switch parts compatable with the 535A automatic and other rigid equiptments in excellent used condition local pickup welcome will box or crate for shipping i will discount first 100.00 towards shipping email your zip code and will give you shipping quote
RIDGID PIPE THREADER R12 12R DIES 1/2 3/4 1-1/4 RIDGID 200 300 400 535
EVERYTHING IS IN PERFECT WORKING ORDER ALL THE DIES ARE SUPER SHARP 1/2 3/4 1-1/4 WITH RATCHET DROP HEAD
Ridgid 535 Pipe Threader Self Oiler With Stand and Threading Dies READY TO WORK
Ridgid 535 Pipe Threader. Threader is in excellent working condition and very tight. Still has original sticker on front jaws. The stand is very solid and it rolls smooth and easy with swing out handles. Includes 1/2" to 3/4" die set and 1" to 2" die set. Nice machine that is ready to work. What you see is what you'll receive. SHIPPING 250.00 Threader will be shipped with ODFL and will need to be picked up at the ODFL service center nearest you unless you have a business address with dock or fork lift. To find the nearest service go to the ODFL web site and put in your zip code or you can email me and I'll look it up. Thanks.
SET RIDGID 535 NPT L.H. Universal Dies
Used RIDGID 535 NPT L.H. Universal Threading Dies. All dies appear to be in good shape. Teeth still look sharp. Payment due within 3 days of auction end. Item will ship once payment is received. Please contact me if you have any questions. Check out my other auctions. Thank You.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13f4189c3c2-0xf7-
*NICE*Ridgid 535,Pipe Threader,141,Hog head,Rigid,Oil Field,Cutters,Dies,Reamers
Ridgid 535 and 141 Pipe threading SET all dies for 1/4" to 4" FREE SHIPPING TO COMMERCIAL ADDRESS IN CONTINENTAL US! Nice Used Set! Lots of extras! All This is Almost $13.000 NEW Retail! GREAT DEAL! SAVE $$$ Works Great! Nice shape. As you can see! INCLUDES- Ridgid 535 Pipe Threader/ with foot control.Reamer and Cutter and Ridgid Carriage! $5,672 New Retail! 1/8" Steel Rolling Cart! NICE Heavy Duty! $429 New Retail) Ridgid 141(Hogs Head) Die with Excellent Die teeth($3.132 New Retail) 3 Ridgid Die Heads! Two 811A and one 811($1.137 New Retail) Ridgid Reamer 2s for 1/8" to 2" $231 New Retail) Ridgid Reamer Model 254 for 2" to 4" $407 New Retail) Ridgid Model 450 Tri Stand($429 New Retail) Ridgid Die Teeth.3 Sets! 1/4"3/8" NPT. 1/2"3/4" NPT, 1"2" NPT($480 New Retail) Ridgid Drive ... moreShaft Extention for 141 Die($426 New Retail) Ridgid 1-3" cutter with New Ridgid cutting wheel($124 New Retail) 2"4" Cutter with New Ridgid cutting Wheel($211 New Retail) 18" Pipe Wrench($26 New Retail) 24" Ridgid C24 Chain Wrench($139 New Retail) 36" Ridgid Pipe Wrench($169 New Retail) Total New Retail for all these items is just over $13.000! RIDGID 535 Features: Large 1.75 gallon oil tray. Large chip tray. Generous top cover for keeping tools and fittings handy. Ridgid carriage. Speed chuck with Ridgid jaws. Centers and grips work piece nicely. Can be used with geared threaders Models 141 and 161. Uses Model 811. Model 500b, Model 816/817 semiautomatic.Or Model 815A self-opening die heads Length gauge for quick. Accurate cut-off. Approved by CSA to CSA and UL standards(115V only) Specifications: Pipe Capacity: 1/8"2" 3mm-50mm) 2 1/2"4" 62mm-100mm) 4"6" 100mm-150mm) with 141 and 161 geared threaders. Bolt Capacity: 1/4"2" 6mm-50mm) Motor: 1/2 HP. Single-phase, 115V, 50/60 Hz, 15 amp reversible universal motor. 36 RPM) Switches: FOR/OFF/REV and Integral safety foot switch. Chuck: Speed Chuck™ with replaceab
Ridgid Model 535 Pipe Threader With Heads and Dies To Thread 3/8"- 2" Pipe
Used tested and works! Please check Seller's payment instructions below for other types of payments we accept. 585-349-2666 Upstate Breaker Wholesale Inc. Thanks. PLEASE NOTE THIS IS FOR 1!We also buy used and new surplus equipment. Breakers, surplus,fire alarm, security ect. any thing just ask us This threader comes with the 5 flute debur reamer. Ridgid 500 die heads and cutter inserts to thread 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" and 2" pipe thread and a Ridgid 811 universal head that cuts 1" 2" pipe thread. It operates on 115volts 8 amps. This will have to ship by freight and I get good rates so give me a call for a quote. LRS1000 LRS1000
RIDGID 535 ELECTRIC PIPE THREADER MACHINE w/1/8 -2" DIES
This listing is for a pipe threader. Make: Ridgid Model: 535 Power: 115V/ 60Hz/ 8A/ Single Phase Includes Universal Die Pipe Capacity: 1/8" thru 2" inch) Bolt Capacity: 1/8in thru 2in ~ This listing is for a pipe threader. Make: Ridgid Model: 535 Power: 115V/ 60Hz/ 8A/ Single Phase Includes Universal Die Pipe Capacity: 1/8" thru 2" inch) Bolt Capacity: 1/8in thru 2in All items are"as pictured" I have a surplus store. Some"new" items may not include original packaging. I do my best to keep all quantities correct. All items listed on eBay should be in stock. I do not"broker" parts or anything like that. I have been in the trucking/distribution business for a long time. So you can expect your package to be shipped safely. I insure everything with FedEx. And will also personally back up your purchase(shipping, ... moreand the product itself)
811A Dies Head Fit for Ridgid 300 500 535 threader 1/2 - 3/4
Die is in good used condition with chip in one of four cutters as shown in photos. Die comes with 1/2- 3/4 cutters
811A Dies Head Fit for Ridgid 300 500 535 threader 1 - 2 inch NPT
Die is in good used condition. Die comes with 1- 2 inch cutters;1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f8f13c02e-0x106-
ridgid universal 535 bolt dies 1" 8 UNC
The bid is for an used set of RIDGID DIES UNIVERSAL 535 BOLT 1" 8 UNC in good shape. WHAT YOU SEE IS WHAT YOU GET. winner pays for shipping and handle $5.00 to the lower 48 states. The item will be sent by USPS. Buyer must pay within 5 days after auction is finished, if you are located in hawaii, canada or alaska please contact me for shipping cost. THANKS FOR LOOKING, PLEASE DON'T BID ON MY ITEMS IF YOU ARE NOT SURE TO PAY FOR IT. ANY QUESTION E-MAIL ME thanks and good
RIDGID 700 PIPE THREADER RIDGID 200,300,400,535,1122 RIDGID R12 12R DIES
RUNS NICE AND SMOOTH USED AS SHOWN IN PICS OPINIONS VARY OF DISCRIPTION PICS SAY A 1.000 WORDS PLEASE VIEW PHOTOS OF DISCRIPTION AND CONDITION. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13fc610b32c-0xff-
Ridgid 4PJ 2-1/2 to 4" Gearhead Pipe Threader with 3" & 4" Dies 700 300 535 141
You are considering a Ridgid 4P-J Gearhead Pipe Threader. This threader is used but is in fair overall condition. The threader operates fine but could use a paint job. We have not tested this threader under working conditions. Being sold AS IS. Mfg By: Ridgid Cat No: 4P-J Pipe Capacity: 2-1/2" to 4" Threader comes with a used set of 3" and 4" dies. Dies look to be in good usable condition. SHIPPING: Buyer to pay actual shipping cost from Muscle Shoals. AL 35661. Or, you are more than welcome to pick the items up here. We will be happy to combine shipping on multiple items. Please contact us for combined shipping quotes. PAYMENT: Paypal If you have any other questions please feel free to contact us. You may do so by using the"ask seller a question" form on this listing. Or. Call us at(256) 386-9808, Monday- Friday, ... more8:00 to 4:30, CST. Thanks for looking and Happy Bidding. Be sure to Check out our other items for more new and used surplus items.
*NICE*Ridgid 535,Pipe Threader,Rigid,Oil Field,Cutters,PJ-4, 1/2"-4"Dies,Reamers
Ridgid 535 and 4P-J Pipe threading SET all dies for 1/2" to 4" FREE SHIPPING TO COMMERCIAL ADDRESS IN CONTINENTAL US! Nice Used Set! Lots of extras! All This is Almost $13.000 NEW Retail! GREAT DEAL! SAVE $$$ Works Great! Nice shape. As you can see! INCLUDES- Ridgid 535 Pipe Threader/ with foot control.Reamer and Cutter and Ridgid Carriage! $5,672 New Retail! 1/8" Steel Rolling Cart! NICE Heavy Duty! $429 New Retail) Ridgid PJ-4(Hogs Head) Die with Excellent Die teeth($2.732 New Retail) 2 Ridgid Die Heads! Two 811($758 New Retail) Ridgid Reamer 2s for 1/8" to 2" $231 New Retail) Ridgid Reamer Model 254 for 2" to 4" $407 New Retail) Ridgid Model 460 Tri Stand($468 New Retail) Ridgid Die Teeth.3 Sets! 1/2"3/4" NPT. 1"2" NPT, 2 1/2"4" NPT($480 New Retail) Ridgid Drive Shaft Extention ... morefor 4P-J/141 Die($375 New Retail) Ridgid 1-3" Cutter with Nice Ridgid cutting wheel($124 New Retail) Ridgid 6s 2"4" Cutter with Nice Ridgid cutting wheel($511 New Retail) 18" Pipe Wrench($26 New Retail) 24" Ridgid Pipe Wrench($139 New Retail) 48" Ridgid Pipe Wrench($229 New Retail) Total New Retail for all these items is almost $13.000! RIDGID 535 Features: Large 1.75 gallon oil tray. Large chip tray. Generous top cover for keeping tools and fittings handy. Ridgid carriage. Speed chuck with Ridgid jaws. Centers and grips work piece nicely. Can be used with geared threaders Models 4p-j or 141 and 161. Uses Model 811. Model 500b, Model 816/817 semiautomatic.Or Model 815A self-opening die heads Length gauge for quick. Accurate cut-off. Approved by CSA to CSA and UL standards(115V only) Specifications: Pipe Capacity: 1/8"2" 3mm-50mm) 2 1/2"4" 62mm-100mm) 4"6" 100mm-150mm) with 4P-J, 141 and 161 geared threaders. Bolt Capacity: 1/4"2" 6mm-50mm) Motor: 1/2 HP. Single-phase, 115V, 50/60 Hz, 15 amp reversible universal motor. 36 RPM) Switches: FOR/OFF/REV and Integral safety foot switch. Chuck: Speed Chuck™ with
Ridgid 500 Mono Die Head 1/2 - 2 w/Rack New Dies Fits 300 535 1822 Pipe Threader
Ridgid 500 Mono Die Head 1/2- 2 w/Rack New Dies Fits 300 535 1822 Pipe Threader Genuine Ridgid 500 Mono Die Heads Set of 6 with Brand New Threading Dies& Storage Rack Sizes 1/2" to 2" NPT. Buy With Confidence Fully Tested! Ridgid Lifetime Warranty! 14 Day Money Back Guarantee! Super Fast Free Shipping! This is a set of 6 genuine Ridgid 500 Mono die heads with a steel storage rack. A Ridgid 500 Mono die head is a dedicated die head meaning each die head only threads one size of pipe. The Ridgid 500 Mono die head is quicker and easier to use than a Universal or 811A die head because you never need to adjust the die head or change out the pipe threading dies when threading different pipe sizes. This is a real time saver! It is much quicker and easier to change out the entire die head from your pipe threading machine than it is ... moreto change the pipe threading dies or adjust a Universal or 811A die head to the size you want. A Ridgid 500 Mono die head opens. Closes, and fits the Ridgid 300, 535, 800, 1822-I pipe threading machines exactly like a Universal or 811A die head. The die head sizes in this set are: 1/2" 3/4" 1" 1 1/4" 1 1/2" and 2" NPT. I am also including a brand new set of Ridgid pipe threading dies sealed in Ridgid packaging for each of the 6 die heads. Ridgid's retail list price is $360.90 for each Mono die head. Plus $206.20 for each set of pipe threading dies, plus a extra $207.35 for the storage rack. Ridgid's retail list price totals $3.609.95, plus sales tax in most states. Here is your chance to make your life easier! You can now purchase this item at a fraction of the retail price and save a lot of money! Buy It Now For Only $2199.99 and Save Over $1409.00 Includes Free Shipping. Insurance, and a 1 Year Extra Warranty Any Questions? Call Rick at(801) 759-5483 anytime Please Review My Feedback Click on the underlined View My Feedback and buy with confidence. I only offer good quality new and used tools in top condition you will be proud to own! Visit
Ridgid Dual 500 Die Head 1/2" 3/4" NPT New Dies Fits 300 535 1822 Pipe Threaders
Ridgid Dual 500 Die Head 1/2" 3/4" NPT New Dies Fits 300 535 1822 Pipe Threaders Genuine Ridgid 1/2" to 3/4" Quick-Opening Dual 500 Die Head With New Dies Fits All Ridgid 300 500 535 800 801 1215 and 1822-I Pipe Threading Machines. Buy with Confidence Fully Tested! 1 Year Extra Warranty! 14 Day Money Back Guarantee! Super Fast Free Shipping! This is a legendary Ridgid quick-opening dual 500 die head. The dies in the photo are chipped and broken. But can be used as spares in case of an emergency. I am including a brand new set of 1/2" to 3/4" NPT pipe threading dies sealed in Ridgid packaging. A Ridgid dual 500 die head opens. Closes, and fits Ridgid 300, 535, 1822-I, and other pipe threading machines exactly like the Ridgid universal or 811A die heads. This die head has has been kept clean and well oiled. There ... moreis no rust. No dings, and absolutely no cracks anywhere. You will not be disappointed with this bad boy! Yep! There are cheaper die heads listed on eBay this week. But don’t settle for cheap junk made in China! I do not think you will find a nicer genuine Ridgid dual 500 die head anywhere! If you are looking for a quality Ridgid die head in top condition, with a 14-day money back guarantee, and an extra 1-year warranty from an experienced and reputable eBay seller, this is the die head for you! Ridgid’s retail list price is $360.90 for the die head. Plus $206.20 for a new set of 1/2" to 3/4" NPT threading dies. Total Retail is $567.10, plus sales tax in most states. Here is your chance to make your life easier! You can now purchase this item at a fraction of the retail price and save a lot of money! Buy It Now For Only $249.99 and Save Over $ 317.00 Includes Free Shipping. Insurance, and a 1 Year Extra Warranty Any Questions? Call Rick at(801) 759-5483 anytime Please Review My Feedback Click on the underlined View My Feedback and buy with confidence. I only offer good quality new and used tools in top condition you will be proud to own! Visit My eBay Store Please cli
RIDGID 535 PIPE THREADER with 10 Dies - 1/8" - 2"
Here is a RIDGID PIPE THREADER 535 Includes 10 dies: 1/8. 1/4, 3/8, 1/2, 2 of the 3/4, 1. 1-1/4, 1-1/2, 2 All dies like new. Sharp Runs great For more info- contact Robert@ 989-233-3472 Also being sold locally- therefore. Can be removed before listing end. PayPal or cash upon pickup only. Item being sold"as is" No refunds or returns. PICK-UP ONLY. No assistance of loading available.
RIDGID 500 PIPE THREADING DIES FOR 300 535 500 THREADING MACHINE 3/8 to 2 inch
RIDGID 500 PIPE THREADING DIES FOR 300 535 500 THREADING MACHINE 3/8 to 2 inch RIDGID 500 PIPE THREADING DIES FOR 300 535 500 THREADING MACHINE 3/8 to 2 inch. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 ... moreVICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
Ridgid 535 Pipe Threader with Stand * Cutter * Reamer * (8) Mono 500 Dies * 115V
RIDGID 535 PIPE THREADER Just removed from service at a World Class production giant is this Ridgid 535 pipe threading machine in good operating condition. It was replaced by a new larger Ridgid model that is capable of up to four inch. Which made this machine surplus to their needs. The machine was well maintained and expected to perform right up to the point that it was replaced, it was a maintenance machine in an industrial production environment that had to be dependable. Included are eight complete"Ridgid 500 Mono NPT Pipe Die Head" sets in the following sizes: 1/8" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" With"Stainless" Dies The machine is also equipped with the following attachments: Foot pedal safety switch Pipe Reamer Pipe Cutter Performance was good for all sizes up to 1 1/2" ... moreWhen the 2" die was used you could hear the motor bog down some. Possibly because of using the 2" Stainless" dies on black iron pipe, but since most of what the machine was used for were just the 1/2" to 1 1/2" iron pipe sizes it wasn't an issue. As for the dies, they are all in very good condition with the exception of the 1 1/4" set, there is a small chip on each cutting edge of both the number 1 and 3 dies. Other than that I did not see any other damage. The machine and accessories are being offered as a package and all offers will be considered. It must be sold and will sell for the best offer. The machine is known to have functioned as it has been described and will likely continue to do so, however it is a used machine being sold with no warranty, it will be sold as-is with no returns other than if there is a significant error in this description, I don't believe that there are any errors so please be sure it is what you want and to ask any questions before you purchase it. Prompt and accurate answers are guaranteed. Payment or communication regarding payment would be appreciated within three days after purchase. Buyer pays freig
Ridgid 500 B Bolt Die Head Fits 300 535 1822 Threader New Dies Choice of Sizes
Ridgid 500 B Bolt Die Head Fits 300 535 1822 Threader New Dies Choice of Sizes Genuine Ridgid Quick-Opening 500 B Bolt Die Head with Brand New Threading Dies Fits Ridgid 300. 300A, 500, 500A, 535, 800, 801, 802, 1215, and 1822-I Threading Machines. Buy with Confidence Fully Tested! 1-Year Extra Warranty! 14-Day Money Back Guarantee! Super Fast Free Shipping! Your choice of any one of the following new bolt die threading sets. 1/4" 20 UNC Ridgid part Number 48605. 5 sets available. 1/4" 20 UNC Ridgid part number 48910. 2 sets available. Left Hand. 5/16" 18 UNC Ridgid part number 48610. 2 sets available. 3/8" 16 UNC Ridgid part number 48615. 7 sets available. 7/16" 14 UNC Ridgid part number 48620. 1 set available. 7/16" 14 UNC Ridgid part number 48925. 1 set available. Left Hand. 1/2" 13 UNC Ridgid part number ... more48625. 4 sets available. 1/2" 20 UNF Ridgid part number 48710. 1 set available. 9/16" 12 UNC Ridgid part number 48630. 1 set available. 5/8" 11 UNC Ridgid part number 48635. 4 sets available. 5/8" 18 UNF Ridgid part number 48720. 1 set available. 3/4" 10 UNC Ridgid part number 48640. 2 sets available. 3/4" 16 UNF Ridgid part number 48725. 1 set available. 1" 8 UNC Ridgid part number 48955. 1 sets available. Left Hand. 1 1/8" 7 UNC Ridgid part number 48655. 1 sets available. 1 1/8" 8 UN Ridgid part number 49215. 1 set available. 1 1/8" 7 UNC Ridgid part number 48220. 1 set available. Left Hand. 1 1/4" 7 UNC Ridgid part number 48660. 1 set available. 1 3/8" 6 UNC Ridgid part number 48665. 1 set available. 1 3/8" 6 UNC Ridgid part number 48970. 3 sets available. Left Hand. 1 1/2" 6 UNC Ridgid part number 48670. 2 sets available. 1 3/4" 5 UNC Ridgid part number 48670. 2 sets available. 2" 4 1/2 UNC Ridgid part number 48680. 2 sets available. 2" 4 1/2 UNC Ridgid part number 48985. 1 set available. Left Hand. 1/2 to 3/4" Beveler Dies Ridgid part number 50925. 4 sets available. This is a Ridgi
RIDGID Model 535 Threading Machine with Stand and 2 Dies
Up for sale is a Ridgid Model 535 Threading Machine with stand and 2 dies. The dies are 1/8"3/4" and 1"2" The Model 535 maintains the ruggedness of the industry workhorse while adding the features that makes the threading operation more productive. A large chip tray and oil reservoir make the 535 ideal for longer uninterrupted threading. The 535 features a high clearance carriage making the threading operation easier and a generous top cover area that is ideal for keeping tools and work related materials handy. The 535 is designed around maximum up time with the upgrades that matter most to the pipe working professional.
Ridgid 500 Mono Die Head New Dies w Rack 1/2 to 2" Set Fit 300 535 Pipe Threader
Ridgid 500 Mono Die Head New Dies w Rack 1/2 to 2" Set Fit 300 535 Pipe Threader Genuine Ridgid 500 Mono Die Heads Set of 6 with Brand New Threading Dies& Steel Storage Rack Sizes 1/2" to 2" NPT. Buy With Confidence Fully Tested! Ridgid Lifetime Warranty! 14-Day Money Back Guarantee! Super Fast Free Shipping! This is a set of 6 genuine Ridgid 500 Mono die heads with a steel storage rack. A Ridgid 500 Mono die head is a dedicated die head meaning each die head only threads one size of pipe. The Ridgid 500 Mono die head is quicker and easier to use than a Universal or 811A die head because you never need to adjust the die head or change out the pipe threading dies when threading different pipe sizes. This is a real time saver! It is much quicker and easier to change out the entire die head from your pipe threading machine ... morethan it is to change the pipe threading dies or adjust a Universal or 811A die head to the size you want. A Ridgid 500 Mono die head opens. Closes, and fits the Ridgid 300, 535, 800, and 1822-I pipe threading machines exactly like a Universal or 811A die head. The die head sizes in this set are: 1/2" 3/4" 1" 1 1/4" 1 1/2" and 2" NPT. I am also including a brand new set of Ridgid pipe threading dies sealed in Ridgid packaging for each of the 6 die heads. Ridgid's retail list price is $360.90 for each Mono die head. Plus $206.20 for each set of pipe threading dies, plus an extra $207.35 for the storage rack. Ridgid's retail list price totals $3.609.95, plus sales tax in most states. Here is your chance to make your life easier! You can now purchase this item at a fraction of the retail price and save a lot of money! Low Starting Bid of Only $1.699.00 No Reserve- Highest Bid Wins! Includes Free Shipping. Insurance, and an Extra 1-Year Warranty Any Questions? Call Rick at(801) 759-5483 anytime Please Review My Feedback Click on the underlined View My Feedback and buy with confidence. I only offer good quality new and used tools in top condition
Ridgid 535 NPT Universal 1/4 3/8 Pipe Threading Dies - Set of 4
Used Complete Set of Ridgid 535 NPT Universal Pipe Threading Dies Sizes 1/4 3/8#s 1.2,3,4 Dies are Used cutting teeth are in good condition as shown in pictures. Shipping to Lower 48 U.S. States Only
Ridgid 500 A Mono Die Head 1/8" to 2" New Dies Fit 300 535 1822 Threader 9 Size
Ridgid 500 A Mono Die Head 1/8" to 2" New Dies Fit 300 535 1822 Threader 9 Size Genuine Ridgid 500 Mono Die Head Your Choice of Any One Die Head Sizes From 1/8" to 2" NPT Buy With Confidence Brand New Threading Dies! 14-Day Money Back Guarantee! 1-Year Warranty! Super Fast Free Shipping! Your choice of any one of the following sizes. Let me know after the sale which size you want. 1/8" Ridgid part number 42047. Not shown in photos. 1 available. 1/4" Ridgid part number 42052. Not shown in photos. 2 available. 3/8" Ridgid part number 42057. Not shown in photos. 6 available. 1/2" Ridgid part number 42062. 1 available. 3/4" Ridgid part number 42067. 2 available. 1" Ridgid part number 42072. 2 available. 1 1/4" Ridgid part number 42077. 2 available. 1 1/2" Ridgid part number 42082. 2 ... moreavailable. 2" Ridgid part number 42087. 3 available. A Ridgid 500 Mono die head is a dedicated die head meaning each die head only threads one size of pipe. The Ridgid 500 Mono die head is quicker and easier to use than a Ridgid Universal type die head because you never need to adjust the die head or change out the pipe threading dies when threading different pipe sizes. This is a real time saver! It is a lot quicker and easier to change out the entire die head from your pipe threading machine than it is to change the pipe threading dies or adjust a Universal die head to the size you want. A Ridgid 500 Mono die head opens. Closes, and fits the 300, 535, 800, and 1822 threading machines exactly like a Universal die head. Each die head will come with a brand new set of genuine Ridgid pipe threading dies sealed in Ridgid packaging. Ridgid's retail list price is $360.90 for each Mono die head. Plus $206.20 for each set of pipe threading dies. Ridgid's retail list price totals $567.10. Plus sales tax in most states. Here is your chance to make your life easier! You can now purchase this item at a fraction of the retail price and save a lot of money! Buy It Now For Only $3
Ridgid 535 Pipe Threading machine with 2 dies, cutter & reamer. 318 oil bucket
Ridgid 535 Pipe Threading machine with 2 dies. Cutter& reamer. 318 oil bucket This Ridgid 535 Pipe Threading machine is in good overall condition and runs strong. Included with the machine are two Universal Dies. The Cutter, Reamer and also I am including a 318 oil bucket that needs a hand pump. There are also a bunch of new cutters in a couple packages as well. I will note the machine needs a oil pump but I have seen them used for as little as 40.00 on eBay. Other than that the machine works and runs well. The table it is sitting on is not included. This is a local pickup item only no shipping. Please feel free to ask questions and thank you for looking. Payment for auctions is required within 3 business days or an unpaid item case will be opened through eBay. We do not like doing that so please if you intend to bid on one of our auction ... morelistings please be so kind kind as to pay for it. I understand things can happen so please if you need more time or are having difficulties please contact us and we can work something out together. We are a family run business and we are really nice people. Most all of our items ship out on the day of purchase excluding weekends and holidays. If you purchase an item on a Friday it may not go out until Monday. However we do sometimes ship on Saturdays. We try our hardest to get your items out right away. Together we have over 20 years in the shipping and receiving business and all of items are packed very well using clean boxes and new packaging materials. We make sure your items arrive safely and in a timely fashion. Most of our items are buy it now listings but we also have auctions. We require immediate payment for most items excluding auctions. If you need time to pay then please ask as we are willing to work with our customers. Happy customers mean a successful business. Our number one goal is to make the customer happy. We are a husband and wife team and we work hard together to make sure new items are added daily to our store. Please check back fro
Ridgid 141 Threader 2 1/2" to 4" Pipe, complete with dies, 300 535 1224
Very good condition as shown. Only used a couple times. Call with questions before you bid 909-794-8638, thanks
Ridgid 300 535 thread machine Dies #47750 1"-2" NPT used
ridgid dies part#47750 1"2" NPT alloy steel unv right hand. these are lightly used and in clean and perfect working condition. free shipping within the united states. Add $5.00 to ship to canada
SET OF 4 Ridgid 535 NPT Universal 1/4-3/8 Pipe Threading Dies threader bolt
DESCRIPTION GOOD USED WORKING CONDITION USE THE ZOOM FEATURE TO FURTHER INSPECT THE ITEMS IN THE PICTURES. WE STRIVE TO BE 5-STAR SELLERS. IF THERE ARE ANY PROBLEMS WITH YOUR ORDER PLEASE LET US KNOW IMMEDIATELY SO WE CAN MAKE THINGS RIGHT AND EARN YOUR 5-STAR FEEDBACK RATING. RETURN POLICY RETURNS ACCEPTED WITHIN 30 DAYS OF RECEIVING ITEM IF: The item(s) must be in its original condition. And also must be the same exact items with the same serial numbers as shipped to you. We use serial numbers and/or security markings to help prevent fraudulent returns. Any item(s) marked AS-IS. PARTS/REPAIR, or NO RETURN are not elgible for refunds. PAYMENT Payment expected within 7 days of purchasing item(s) Please try to make payment through paypal. If needed contact us for an alternative method SHIPPING Orders are usually shipped within 1 business day ... moreof cleared payment International customers feel free to contact us for a better shipping quote. Prices are not necessarily set Orders are usually shipped via USPS Our products come from various sources. We claim no affiliation with the manufacturers of our products. Safety and any other technical or general questions should be taken up with them. We are resellers of these items. And generaly not experts in the field these items pertain to. 031714mwD24 SHELF 2658/100 Powered by
RIDGID 161 ADJUSTABLE DIE PIPE THREADER 4" to 6" new dies 300 535 THREADING
RIDGID 161 ADJUSTABLE DIE PIPE THREADER 4" to 6" FOR 300 535 THREADING Condition: USED RECONDITIONED ACTUAL ITEMS ARE SHOWING IN PICTURES 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEE L FREE TO Call us@ 248-521-7777 thank Please allow 4-6 days for shipping and handling. Thank you.
RIDGID PIPE THREADER 535 Threading Machine - dies - Low Hours
We Will Load For Free We Can Stretch Wrap and Band To a Pallet for Free Free Shipping Quotes anywhere in the Usa Pipe Threader Model: 535 Volts: 115 Comes With Three Dies 2pcs- 1/8 in- 2in Pipe 1pcs- 1/4in- 3/8 in pipe This Machine Works Great. Has Very Little use This Machine is being stored in our heated warehouse. It can be inspected through out the auction in our warehouse. We are located next to the Philadelphia Air Port. I will be Happy to answer any questions you may have. Machine is being sold as is. The specs on this machine are subject to buyers inspection. Some of the specs we pulled from the internet of this same machine and year: We have Excellent feedback rating. Our goal is to keep you. Our customers satisfied. We can Deliver this Machine and place it on your shop floor if you are in a 4 hour range from Philadelphia for an ... moreadditional Fee. We will Load this onto any truck or trailer for FREE. Cross country Transportation: You can get a great rate by calling 1-888-651-0566This is the Trucking company that we use. Please check out our other forklifts. Machinery, and accessorizes on Ebay and our EBAY STORE. Sign up for my email newsletters by adding my eBay Store to your Favorites Payment: PayPal. Wire Transfer, or Certified Bank Check We Rent Heavy Duty Forklift up to 100.000 lbs Industrial Plant Service Millwrights- Riggers- Plant Relocation- Warehousing- 100 ton bridge crane- 400 ton hydraulic gantry- Heavy duty roll back& low boy service- Lift trucks up tp 100.000 lbs, machinery moving experts JOYCE BROTHERS MACHINERY& EQUIPMENT SALES
Ridgid 815A Die Head Fits 300 535 1822 Pipe Threader 1" - 2" Threading Dies 815
Ridgid 815A Die Head Used in excellent with 1" to 2" Ridgid dies. It's missing the adjuster bolt and wing nut. What you see is what you'll receive.
USED RIDGID MODEL 535 PORTABLE PIPE THREADER W/ REAMER & 4 SETS OF DIES
USED RIDGID MODEL 535 PORTABLE PIPE THREADER W/ REAMER AND 4 SETS OF DIES Comes As Shown in Picture S SHIPPING INFORMATION: Shipping Weight: NO SHIPPING AVAILABLE Item location: 1434 Santa Anita Ave. S. El Monte. Ca BID w/ CONFIDENCE& GOOD LUCK! Questions:Use"Ask Seller a Question" Link PAYMENT INSTRUCTIONS: All payments must be received within 2 business days. If there has been no contact/payment from the buyer within 3 days. NPB will be filed and the item will be re-listed. Buyers are responsible for paying Sales Tax if in California CUSTOMER SERVICE: We do our best to present accurate information about every item we sell. If you have any questions. Use the"Ask Seller a Question" Link before placing your bid. RETURNS: We offer a 14 day return policy for this item from the time of delivery. After 14 days no refunds ... moreand returns will be accepted. Buyers will pay for return shipping to our location.
Ridgid 535 Pipe Threader rigid 300 1224 1822 PLUS 4 dies and roller stand!
Used- Ridgid 535 pipe threader package deal. 120V. 15A, 36 RPM. This unit is in good condition. Runs fine in both directions. Ready for work. Includes the foot pedal. Roller stand and a total of 4 dies(1- standard 811 die head and 3- 500B bolt dies) All of the die heads have good cutters. The lower mesh tray has some grime on it. This will ship freight: For a proper freight quote we need to know a couple things. 1. What is your zipcode? 2. Is it a commercial address? 3. Is there a forklift or loading dock at the drop-off location? Please make sure this is what you need prior to bidding. Don't miss out. Check out my other auctions. For more great deals from JSF Industrial! Washington state residents add 8.7% sales tax. Buyer must verify their address prior to bidding. If your package is returned due to faulty address. Then buyer agrees ... moreto pay the return shipping fees, as well as secondary shipping fees to get the item back to a valid address. If buyer wants a refund for the item under such conditions, then the buyer agrees to pay the costs for the original shipping as well as the return shipping to sender. If buyer does not pay these fees, then the buyer agrees to forfeit all rights to the original total payment as well as the auction item. We do not allow returns for buyers remorse, mistaken purchase, wrong order or part number. Buyer must verify the auction item is exactly what they seek prior to bidding. Thanks! Powered by The free listing tool. List your items fast and easy and manage your active items.
Ridgid Universal 811A Die Head 311A 300 535 811 with 1"-2" NPT HS 47770 dies
RIDGID 811A Opening Universal Die Head You are considering an original(this not a knock off) Ridgid No. 811A. Universal" Die head. Head has a 1/8" 2" capacity. Will fit on Ridgid model 300, 535 and 1822 threaders w/ 311 or 311A carraiges. Comes with a set of 1"2" NPT HS threading dies, Prod.No. 47770. Sharp to the touch. Please e-mail with any questions Winner must make contact including payment arrangements within 3 days of auction end. Payment must be received within 10 days of auction end. I reserve the right to resell any item if I have not received contact from the winner within 3 days, and or received payment for any item within 10 days of the auction end. I accept PayPal. I try to descibe exactly what the item is. Please email any questions. All sales final. I do participate in leaving feedback on Ebay. Thanks ... morefor looking and good luck! Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-1450b721d11-0x108-
**EXCELLENT** RIDGID 815A DIE HEAD WITH 1/2 - 3/4 NPT SS DIES FITS 300 535 1822
RIDGID 815A DIE HEAD 1/2- 3/4 NPT SS DIE SET EXCELLENT USED WELL MAINTAINED UNIT IN PERFECT WORKING ORDER COMES WITH DIE SET AS SHOWN IN PICTURES*30-DAY MONEY BACK GUARANTEE ON ALL MY ITEMS-NO QUESTIONS ASKED* FREE SAME DAY SHIPPING USA* SHIPS WORLDWIDE-SEE INTERNATIONAL SHIPPING COSTS*
GENUINE RIDGID 815A DIE HEAD FITS PIPE THREADER 300 535 w NEW 47770 & 47745 DIES
GENUINE RIDGID 815A DIE HEAD FITS PIPE THREADER 300 535 w NEW 47770& 47745 DIES Ridgid 815a Up for auction is a Ridgid 815A Die Head and 2 extra sets of dies. There is a set that is currently installed on the head. So there are 3 sets included in this listing. The 815a has been gently used and the 2 extra sets ove dies have not been used. FREE SHIPPING TO CONTINENTAL US ONLY! Please look at the pictures and feel free to ask any questions. Attention International Bidders! Please request a shipping quote before placing a bid. I am a fair as possible on shipping prices as possible. If I can ship an item First Class Mail. It requires a trip to the Post Office and a small handling fee will be included in the shipping quote. PayPal Shipping price is for continental US. E-mail me for shipping price anywhere else. I will reduce shipping for multiple ... morepurchases. Provided all items shipped together. Most expensive shipping will be at listed price, all other shipping reduced by 50% Payment expected with-in 5 days. If you need more time let me know. Please e-mail me if you have any questions.
RIDGID 600 - POWER PONY WITH DIES, SUPPORT ARM AND CASE 300 700 535- 139C
RIDGID 600 POWER PONY WITH DIES. SUPPORT ARM AND CASE You are buying a used but nice Ridgid 600 power pony. It comes with dies sized- 1/2" 3/4" 1" 1& 1/4" It has been tested and is working. It comes in a plastic fitted box for easy transportation and storage. please note the latches on the case are broken.The chasers in the dies have been professionally resharpen. Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. ... moreThe buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy with your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. CONTACT US TAPS AND MORE JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listing tool. List your items fast and easy and manage your active items.
RIDGID 600 POWER PONY CASE DIES VISE 300 - 700 - 535 142V
RIDGID 600 POWER PONY You are buying a used but nice Ridgid 600 power pony. It comes with dies sized- 1/2" 3/4" 1" 1& 1/4" It has been tested and is working. It comes in a plastic fitted box for easy transportation and storage.The chasers in the dies have been professionally resharpen. Please note the hinges are missing on the plastic case. Bid with confidence knowing that Taps and More inspects. Cleans and tests(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the auction. The nature of equipment offered and bid accordingly. The buyer must notify ... moreus of a problem within 3 days of receiving item(s) If you are not happy with your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. CONTACT US TAPS AND MORE JOSEPH D'AMICO 440-773-9477 CLEVELAND. OHIO Powered by The free listing tool. List your items fast and easy and manage your active items.
Ridgid 531 Die Head 1/4"-1" Bolt W/3/4-10 UNC Dies Threader 300 535
For sale is a used Ridgid 531 Die Head 1/4"1" Bolt W/ 3/4-10 UNC Dies. Good die head with plenty of life left in dies. Thanks for looking!
Ridgid 535 Pipe Threader w/Dies on Portable Plumber Cart & Various Pipe Fittings
Don't miss out.bidadoo has auctions ending every week in two eBay stores. SKU: 2319675 A: 0013000000CXCfg O: 0065000000RH9hU PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Portable Plumber Cart w/ Ridgid 535 Pipe Threader& Various Pipe Fittings This item is being offered by bidadoo auctions- the largest and most trusted online equipment auction service. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Features/Specifications: Includes Ridgid 535 pipe threader ... morePipe capacity: 1/8" 2" Bolt capacity: 1/4" 2" Speed chuck Two dies(see photos) 25" Tow bar Portable. Wheel based Includes other various pipe fittings. Extension cords, and other various items Dimensions& Weight: Dimensions: L 33" x W 81" x H 58" Shipping Weight: 1420 lbs Condition: Good- working at time of decommission Normal wear from age& previous use in working industrial environment Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/testing. In addition, all conditions are cross-referenced with service personnel, operators, and maintenance system records(when available) bidadoo, Inc. makes no guarantees to actual hours, miles and/or operational condition. Photos and video take priority if there are dis
Ridgid 815 Self-Opening Die Head for 300-535-1822 w/Dies - EXC!
Up for sale is(1) Ridgid 815 Die Head for use on 300. 535& 1822 models in EXC condition! Universal fit- 1/8" to 2" pipe- 1/4" to 2" bolt- includes die set in EXC condition(die set alone goes for over $70) Buyer pays $19.95 shipping/handling within the US. Payment expected within 5 days of auction ending.
Ridgid 811A Die Head Fits 300 535 1822 Pipe Threader 1" 2" Threading Dies 811 A
Ridgid 811A Die Head Fits 300 535 1822 Pipe Threader 1" 2" Threading Dies 811 A In good used condition. But shows signs of use and wear. Please view all the photos carefully before bidding. Thank you!
Ridgid 815A Die Head Fits 300 535 1822 Pipe Threader w/ 1/2"-3/4" Threading Dies
Very nice condition 815A universal threading die. Threads both bolts and pipe. This one has a set of Ridgid 4775 1/2"3/4" NPT dies that are in very good condition. It is in excellent condition. Free shipping to the lower US 48 states only.
Ridgid 815 Die Head Self Opening ,Dies Included,, Power Machine 300 535 rigid
this listing is for a ridgid 815 die head with the dies included. The dies have no chipped teeth and should be good to go.they work as they should. Comes as shown.
RIDGID 811 Universal Die Head for Rigid 300 535 with 1/4" - 3/8" NPT dies
Offered here is a Ridgid 811 Universal die head with 1/4" to 3/8" NPT dies included. Thanks for looking and have a Great Day! On Jul-28-14 at 07:33:19 PDT. Seller added the following information:
RIDGID 12R DIE HEAD WITH 6 DIES - 300 - 700 - 535 135T
RIDGID 12R DIE HEAD HANDLE WITH 6 DIES Sizes included: 2" 1& 1/2" 1& 1/4" 1" 3/4" and 1/2" You are buying a used but refurbished die head handle with 6 dies. This set has been disassembled. Cleaned and repainted. The die chasers or cutters have been professionally resharpened. Buy with confidence knowing that we inspect. Clean and test(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the sale. The nature of equipment offered and buy accordingly. The buyer must notify us of a problem within 3 days of receiving item(s) If you are not happy ... morewith your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING We don't up- price our shipping and we don't add handling costs. If we can save you on shipping. We will combine or use a different carrier to do so. If we ship your item for a cheaper price, we will refund the difference to you. Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. For UPS. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. eBay's star ratings and feedback directly affect a buyer. If you feel that we don't deserve 5 stars or positive feedback. Please contact us
Ridgid 535 Threader with Nipple Maker and Threading Dies
Ridgid 535 threader with nipple maker and threading dies. Local pickup only.
Ridgid 500 B Bolt Die Head Fits 300 535 1822 Threading Machines W/ 1/4"- 1" Dies
From an estate- used vintage- Ridgid model 500A Bolt threading head with 6 sets of bolt thread cutting dies. Threading head is in good used condition. Treading dies- 1/4" 5/8" are used- 1/2" 1" do not appear to have been used? All dies come in a wood box- organized. Free shipping in the USA.
RIDGID 535 PIPE THREADING MACHINE 1/2 - 2 " CUTTER REAMER DIE HEAD DIES
RIDGID 535 PIPE THREADER CAPACITY 1/2- 2" COMPLETE WITH CUTTER- REAMER- DIE HEAD- DIES- FOOT PEDAL MOUNTED ON LEGS RECONDITIONED AS NEW TO MANUFACTURE SPECIFICATIONS ONE YEAR WARRANTY ON DEFECTIVE PARTS MACHINE BUILT AT SOUTHERN CALIFORNIA SERVICE CENTER- WSS PIPE THREADING EQUIPMENT SERVICES LARGE INVENTORY OF PARTS AVAILABLE DELIVERY IN SOUTHERN CALIFORNIA FREE- PICK-UPS ALLOWED NORTHERN CALIFORNIA DELIVERY AVAILABLE OUTSIDE CALIFORNIA BUYER TO SCHEDULE OWN FREIGHT SERVICE WSS PIPE THREADING EQUIPMENT SERVICE(626) 285-2575
Ridgid 535 Pipe Threading Machine PLUS 6 dies 4P threader and driver and stand
Don't miss out on this great deal! Used- Ridgid 535 pipe threader package deal. 120V. 15A, 36 RPM. This unit is in good condition. Runs fine in both directions. Ready for work! Includes the foot pedal. Machine stand with legs and lower mesh tray, roller stand and a total of 6 dies(1- standard 811 die head, 1 universal die(no cutters) and 4- 500B bolt dies) All of the machine die heads with cutters are in good shape. The lower mesh tray has some grime on it. Also, includes a 4-P big threader(needs new cutters) as well as the drive bar for the 4-P. For an extra bonus, you also get the small hand threader piece, a 4 wheel cutter and a hand reamer. This will ship via freight. Please make sure this is what you need prior to bidding. Don't miss out. Check out my other auctions. For more great deals from JSF Industrial! Washington state ... moreresidents add 8.7% sales tax. Buyer must verify their address prior to bidding. If your package is returned due to faulty address. Then buyer agrees to pay the return shipping fees, as well as secondary shipping fees to get the item back to a valid address. If buyer wants a refund for the item under such conditions, then the buyer agrees to pay the costs for the original shipping as well as the return shipping to sender. If buyer does not pay these fees, then the buyer agrees to forfeit all rights to the original total payment as well as the auction item. We do not allow returns for buyers remorse, mistaken purchase, wrong order or part number. Buyer must verify the auction item is exactly what they seek prior to bidding. Thanks! Powered by The free listing tool. List your items fast and easy and manage your active items. 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-147cdb0218b-0x111-
RIDGID 535 PIPE THREADER THREADING MACHINE LATE MODEL WITH 2 DIES WORKS GREAT
RIDGID 535 PIPE THREADER THREADING MACHINE LATE MODEL WITH 2 DIES WORKS GREAT RIDGID 535 PIPE THREADER THREADING MACHINE LATE MODEL WITH 2 DIES WORKS GREAT. COMES WITH 1/2 to 3/4 and 1 TO 2 inch THREADING DIES. Shipping quoted is to the lower 48 states only. For shipping to HI and Puerto Rico email me for exact rates. PLEASE EMAIL ME WITH ANY QUESTIONS! All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ... moreARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
LOT OF 6 SET RIDGID DIES TEETH FOR 300 535
THE BID IS FOR A LOT OF RIDGID DIES TEETH IN GOOD CONDITIONS. PLEASE CHECK PICTURE FOR MORE DETAILS. IF YOU HAVE ANY QUESTION PLEASE CONTACT US. THANK YOU INCLUDED: RIDGID 500B FOR 65R 1/4-20UNC 1/4"3/8" 1/8" 1/2- 13NC WHAT YOU SEE IS WHAT YOU GET. winner pays for shipping and handle FREE to the lower 48 states only. the item is going to be shipped with FEDEX GROUND 4-5 business days depending on your area location or weather. we don't ship PO BOX at least that the item weight is 15lbs or less. trough POST OFFICE. OTHER places like ALASKA, HAWAII, CANADA, GERMANY,EUROPE, SPAIN, ITALY,UNITED KINDONG AND MORE. PLEASE CONTACT US BEFORE BIDDING for a shipping quote. OUR POLICES: ALL ITEM MUST BE RETURN IT WTHIN 4-5 days after received if there any dissatisfaction with it. please contact us before any negative feedback. so that ... morewe can resolve the issue. OUR GOAL IS TO HAVE A SATISFASE CUSTOMER AT ALL TIMES. THANK YOU AND HAPPY BIDDING. RESIDENTS OF CALIFORNIA PAY TAXES.
Ridgid 1822I Rigid 1822-I 1/2"-2" pipe & Bolt threader 535 300 2 dies cart
Guaranteed good working condition Ridgid Model 1822-I threader on wheeled cart. Has 2 dies heads, one with 1/2"3/4" dies the other with 1"2" dies. Flat shipping of $300.00 to the lower 48 is hub to hub or a business with a dock or forklift. SERIOUS OFFERS CONSIDERED.
RIDGID 700 PIPE THREADER ,12R dies set 1/2"-2", Reamer, Cutter, Vise. 300,535
This is Excellent clean used Ridgid 700 pipe threader! Works Great! Excellent condition. INCLUDES- Ridgid 700 Pipe Threader. Ridgid 12R dies 1/2"3/4"1"1-1/4,1-1/2"2" Dies are in good shape no chipped teeth) New heavy duty metal case. Ridgid Spiral reamer. Ridgid Cutter heavy duty 1/8-2" 18" New pipe wrench. 700 torque arm. Chain vise Bench truck. THREADER HAS BEEN PROFESSIONALLY REFURBISHED TOP TO BOTTOM COMPLETE DISASSEMBLED CLEANED. BLASTED AND PAINTED ALL COMPONENTS HAVE BEEN INSPECTED AND REPLACED AS NEEDED. Any question please email or call: 562-500-2464 Shipping in 2 boxes with Fed-Ex. Buyer pays for shipping.Thanks for looking. We offer free pick up from our store. Shipping within 48 States. Posted with
RIDGID 12R DIE HEAD WITH 9 DIES 300 - 700 - 535 135U
RIDGID 12R DIE HEAD HANDLE WITH 9 DIES Sizes included: 2" 1& 1/2" 1& 1/4" 1" 3/4" 3/8" 1/2" 1/4" 1/8" You are buying a used but refurbished die head handle with 6 dies. This set has been disassembled. Cleaned and repainted. The die chasers or cutters have been professionally resharpened. Buy with confidence knowing that we inspect. Clean and test(when possible) most tools prior to each auction. POLICIES• All statements regarding products and their configurations are to the best of our ability and with the assumption that the buyer is knowledgeable and proficient in the use of this type of equipment. It is the buyer's responsibility to understand the terms of the sale. The nature of equipment offered and buy accordingly. The buyer must notify us of a problem within 3 days of receiving ... moreitem(s) If you are not happy with your purchase. We will gladly refund your money, minus shipping costs. If the item is not as described. You will receive a full refund. SHIPPING We don't up- price our shipping and we don't add handling costs. If we can save you on shipping. We will combine or use a different carrier to do so. If we ship your item for a cheaper price, we will refund the difference to you. Shipping will be via UPS unless otherwise specified. UPS will send an email containing a tracking number once we ship your item. For UPS. P.O. BOXES are never accepted. We ship items to physical addresses only. We ship to the address registered with PayPal. If that address is incorrect. It is the buyer’s responsibility to supply us with the correct address prior to paying for the item. Pick ups are permitted with prior approval. Please do not request a tracking number from us until at least 7 days have past. We ship 5 days a weeks. However, items purchased on Fridays may not be shipped until the following Monday. International items may take longer. eBay's star ratings and feedback directly affect a buyer. If you feel that we don't deserve 5 stars or positive f
Ridgid 700 Power Pony Pipe Threader Set with Dies 1/2" to 2" 300 535 1224
Ridgid 700 Power Pony Pipe Threader Set with Dies 1/2" to 2" From the Manufacturer FEATURES Heavy-duty hand-held power drive Designed for RIDGID No. 12-R die heads. Other RIDGID die heads(OO-R. OO-RB, 11-R) using adapters. Also used with 258/258XL pipe cutters SPECIFICATIONS Capacity 1/8" 2" Pipe(6- 50 mm) 1/4" 1" 8- 25 mm) Bolt(using 00-RB Die Heads) Weight 25 lbs. 11 kg) Power Drive Only Length 28 1/4" 71.7 cm) Switch Double-throw reversible. Gear Head Spur gear reduction face gear drive. Spring-loaded adapter pawls. Hardened steel spindle gear. Body Cast aluminum. Die Heads 12-R. Other Die Heads with adaptors: 00-R. 00-RB, 11-R. Condition The machine has been completely taken apart. Stripped down to base metal, repainted, and clear coated. All internal parts were thoroughly cleaned in a CUDA parts washer ... moreusing rust prohibitor solution. The motor has also been taken apart and cleaned. All wire connections checked, all gears re-greased, and motor brushes replaced. Power cable has been replaced. All new nuts and bolts. All other parts meticulously checked for quality. All replaced parts are Ridgid OEM. This listing includes the refurbished Ridgid 700 Power Pony Pipe Threader. A full die set from 1/2" to 2" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" and a ratcheting manual threader. 3 Year Labor Warranty We warranty your machine for 3 years to cover labor. If your machine breaks down on you within three years. Ship it back to us and we will cover labor costs to fix it. Free Shipping Free shipping to the lower 48 United States. Seller reserves the right to end the listing early if item sells locally. Buyers in California will be charged 8% sales tax due to state requirements. TERMS& CONDITIONS By placing a bid on this item. You are agreeing to all of the following Terms& Conditions, and agree to the shipping charges stated for this auction. If you win this auction. Payment must be received within 7 days from the end of the auction or we reserve t
USED RIDGID 535 PIPE THREADER WITH 8 DIES,REAMER AND OTHER TOOLS
This is a USED RIDGID 535 PIPE THREADER WITH 8 DIES.REAMER AND OTHER TOOLS FOR FREIGHT QUOTE CONTACT US. For questions call 606-216-7713 or email at kenyon_boyd@yahoo.com For credit card payments contact us.
RIDGID 535 PORTABLE WHEELED PIPE THREADER 1/8" TO 2", 811 DIE W/ 1/2" 3/4" DIES
RIDGID 535 PORTABLE WHEELED PIPE THREADER 1/8" TO 2" 811 DIE W/ 1/2" 3/4" DIESTHE THREADER IS IN GOOD CONDITION, IT SHOWS VERY LITTLE USE, WITH ONLY A FEW SCUFFS AND SCRATCHED HERE AND THERE, IT COMES WITH ONE DIE HEAD AND HAS A SHARP SET OF 1/2" 3/4" DIESPLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE THREADER. THE THREADER WILL SHIP VIA FREIGHT SO PLEASE EMAIL ME YOUR ZIP CODE AND IF IT IS GOING TO A HOUSE OR BUSINESS AND IF YOU HAVE A FORKLIFT FOR UNLOADING AND I WILL GET YOU A QUOTE
Ridgid 535 PIPE THREADER Plus Extra Parts, Nipple And Speed Chucks And Bolt Dies
Used Ridgid 535 Pipe Threader. Came from a local contractor. Has foot pedal. Power cord was cut off when received so I spliced one on the threader and it would not power on. I don't know how to test further so being sold for parts only. Also includes speed and nipple chucks. Face plates, screws and about 40 universal bolt dies. Not sure if bolt dies are new or used. Will come to you exactly as pictured. Sold as is with no guarantees and no returns. Buyer to pay shipping of $275 for freight shipping. I accept Pay pal
Ridgid 500 1/2" NPT pipe threading head with dies. fits ridgid 300 and 535.
Very nice used Ridgid 500 1/2" NPT pipe threader head with used dies included.
Ridgid 535 pipe bolt threader with cart, tool storage and 3 dies power threader
Up for auction is a Ridgid pipe threader Model 535. This is a very nice. Very clean machine. It has recently been touched up with paint on machine only. Everything moves and operates as it should. It comes with 3 extra dies. 2 are large dies that will thread 1/8-2" pipe and 1/4" 2" bolts. The smaller die is for 3/4" pipe. All teeth on the dies are in very good shape. Inside of machine is really clean and free of a lot of metal shavings. Has the foot pedal control as well. Cart is very sturdy and has a tool storage chest on it. Wheels on the cart are in very good condition. The feed handle on the front of the machine however is missing 1 of the handle arms. It was missing when we got it. And one is broken off but will be repaired before item sells. Pics show there are 2 and it does still operate fine with just these 2. ... moreVery nice machine and dies! Being sold as is. except the repair that will be done on the feed handle) Payment due within 7 days of auction end. Ohio residents must pay sales tax. Prefer local pickup but will prepare to ship for $50 crating fee on top of winning bid and buyer must arrange and pay for shipping separately. Questions call 310-597-8951.
ridgid die head 811A w/ dies inserted for 300-500-535 threader inv# 2753
like new like new dies inserted.Ready for work
ridgid die head 811A w/dies for 300-500-535 threader inv#2744
normal use like new dies inserted already to go.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-14b30f885b6-0x111-
ridgid die head 811A with dies inserted for 300-500-535 threader inv# 2747
normal use dies already inserted.ready for work
Ridgid 700 Portable Electric power Pipe Threader & DIES!! Machine Rigid 300/ 535
For sale is a Ridgid 700 Power pony This threader is used in perfect working condition! The machine is very strong and smooth. The cord is a used and aged but has no frays or cuts. The machine itself has a few scratches and worn paint which can be seen in pictures. This machine is in perfect working condition. Field and armature were replaced a few months ago. The threader has been taken apart and cleaned/ inspected. Wiring has been checked and cleaned as well. Comes with 3 used dies. all dies have good used teeth and are guaranteed to cut good threads. Includes the following dies. 1/2" 3/4" 1 1/4" WE WILL INCLUDE A NEW(extra) SET OF BRUSHES for when the time comes. Please feel free to ask any questions.
Two RIDGID 815 Self open die heads with 1/2"-3/4"& 1"-2"dies Ridgid 300,535
Up for sale Two used Ridgid 815 die head with 1/2"3/4" and 1"2" dies.They are used in excellent condition. Shipping 48 States. Buyer pays for shipping. Any question please email or call: 562-500-2464 Posted with
Ridgid Die Head for 535 300 Pipe Threaders and 1 - 2 Inch Dies Included
Auction today is for 1 item described as a Ridgid Die Head for threading machines. For Ridgid 300 and 535 pipe threaders. Also comes with a set of pipe threading dies in the size of 1- 2 inch. Item is used and comes with no warranty. Item in picture is the item you will receive upon a successful bid. Item is commonly used in the pipe fitting business. Fire sprinkler business, plumbing business, electrical business ect.where ever there is a need to fab pipe. Threads pipe sizes 1 inch thru 2 inch. Item ships for $15 Thanks for looking!
RIDGID 700 PIPE THREADER 1/2"- 4", RIDGID 141, 12R DIES, RIGID 300 535 1822
Up for sale is a Ridgid 700 that sounds and works great. 141 with nice dies and no chips, 12 R dies with no chips, 44-S cutter 2 1/2" 4" 2A/202 cutter 1/8"2" reamer, new case, and nice 450 stand and vise 1/8"5" You will be happy with this set up! Check out my feedback and email me with any questions. Thanks, Chris
GENUINE RIDGID SELF-OPENING 815A DIE HEAD W/ 1"-2" DIES 300 535 1822 1822-1
RIDGID SELF-OPENING 815A DIE HEAD W/ 1"2" DIES This was only used a couple of times and is in like new condition. What you see is what you'll receive.
Ridgid Pipe Threader 535 With 2 815 Dies , Reamer, Cutter & Stand NO RES
Ridgid pipe threader 535 with 2 dies reamer. Cutter and stand
ridgid die head 811 w/dies for 300-500-535 threader
Rigid 811 die head and 1"2" die segments. The#1 die segment has a chip on the tooth at the far end of the thread.
Ridgid 47785 Universal Pipe Threader Dies 1/2"-3/4" NPT HS/SS Slightly 811 535
RIDGID 47785 Die Set This is a very nice set of 1/2"3/4" dies for your Universal Die head(811 or 815) It looks to me that they were only used a couple of times. 90% life left. Ridgid 47785 Universal Pipe Dies 1/2" 3/4" NPT HS/SS Slightly Used 811 815 535 300 1822. Please e-mail with any questions Winner must make contact including payment arrangements within 3 days of auction end. Payment must be received within 10 days of auction end. I reserve the right to resell any item if I have not received contact from the winner within 3 days, and or received payment for any item within 10 days of the auction end. I accept PayPal. I try to descibe exactly what the item is. Please email any questions. All sales final. I do participate in leaving feedback on Ebay. Thanks for looking and good luck! Powered by The free listing tool. ... moreList your items fast and easy and manage your active items.
Ridgid 47765 Universal Pipe Dies 1/2" - 3/4" NPT HS Slightly Used 811 815 535
RIDGID 47765 Die Set This is a very nice set of 1/2"3/4" dies for your Universal Die head(811 or 815) It looks to me that they were only used a couple of times. 90% life left. Ridgid 47765 Universal Pipe Dies 1/2" 3/4" NPT HS Slightly Used 811 815 535 300 1822. Please e-mail with any questions Winner must make contact including payment arrangements within 3 days of auction end. Payment must be received within 10 days of auction end. I reserve the right to resell any item if I have not received contact from the winner within 3 days, and or received payment for any item within 10 days of the auction end. I accept PayPal. I try to descibe exactly what the item is. Please email any questions. All sales final. I do participate in leaving feedback on Ebay. Thanks for looking and good luck! Powered by The free listing tool. List ... moreyour items fast and easy and manage your active items.
Ridgid No. 500 Pipe Threading Die Head 1" Pipe - NO DIES (Ridgid 300, 535 etc)
This is a Ridgid No500 mono die head that fits various machines. This one is for 1" NPT pipe. There are no dies with this head. Priced very low. Flat rate shipping to the lower US 48 states of $9.
Ridgid 535 Pipe Threader bolt threader rolling cart and dies
Very nice Ridgid pipe threader Model 535. This is a very clean machine. It has recently been touched up with paint on machine only. Everything moves and operates as it should. It comes with 3 extra dies. 2 are large dies that will thread 1/8-2" pipe and 1/4" 2" bolts. The smaller die is for 3/4" pipe. All teeth on the dies are in very good shape. Inside of machine is really clean and free of a lot of metal shavings. Has the foot pedal control as well. Cart is very sturdy and has a tool storage chest on it. Wheels on the cart are in very good condition. The feed handle on the front of the machine however is missing 1 of the handle arms. It was missing when we got it. And one is broken off. Pics show there are 2 and it does still operate fine with just these 2. Very nice machine and dies! Being sold as is. Payment due within ... more7 days of auction end. Prefer local pickup but will prepare to ship for $50 crating fee on top of winning bid and buyer must arrange and pay for shipping separately. Please call with questions 419-670-2193.
Ridgid Universal Pipe Threading Dies 1/2"-3/4"NPSM HS High Speed 811,300,500,535
Excellent condition buy this set before its to late. Dies have plenty of life left in them. Save money and buy used. No international shipping. Shipping to the lower 48 states only. FREE SHIPPING Final sale No refunds `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-14bedc0e712-0x110-
pipe machine ridgid 535 A automatic pipe machine with automatic opening dies.
I have a rigid 535A- Automatic pipe machine threader. This unit is in excellent working condition. It has 3 speeds and cutter. Reamer, and threader dies attached. Upon pushing the pedal, this machine will automatically close the front and back chucks to grab and secure the pipe. It has a built in oil resorvior that self oils the pipe while threading. This a very fast threading and cutting machine. It runs off of 120 electric and can be ran off of a generator. I have 2 self opening automatic die heads with npt 1/2"3/4" and 1" 2" die sets in them. Die sets still thread great. I also have a quick opening die head as well. Machine Rigid 535A- Retail $6815.00 Stand for Machine Rigid#150A- $682 retail Self Opening Die heads Rigid#97075- Retail $699 a piece- Quantity 2 = $1398 Quick opening die head Rigid#97065- Retail $368.00 ... moreRigid Model 820 Pipe cutter(new wheel) Retail $299 This machine is well serviced and runs excellent. This unit will clean up great. picture is dirty) We no longer need this machine, we are using a small rigid 300 for portability and no longer have larger production jobs.
Ridgid 1"- 2" Universal Dies NPT #5 Excellent condition 811,535,300 Die Head
This set is in great conditions. Teeth's are in excellent conditions.What you see is what you get. No international shipping. Shipping to the lower 48 states only. FREE SHIPPING FINAL SALE NO REFUNDS ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION