In 
 
Order by: 
Available to: 
Price: 
 - 
eBay Affiliate Links
$
7499.99
Buy It Now
$400.00 Shipping
Condition: Used
Location: Hallandale, United States
FLAT RATE FREIGHT TO THE LOWER 48 STATES. In Great working condition. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION.
$
8500.00
Buy It Now
$400.00 Shipping
Condition: Seller refurbished
Location: Coldspring, United States
EASTEX TOOL HAS REFURBISHED AND SOLD HUNDREDS OF THREADERS. CHECK OUT OUR OTHER RIDGID PIPE TOOLS AND THREADERS.
$
5500.00
Buy It Now
$425.00 Shipping
Condition: Used
Location: Hemet, United States
RIDGID 1224 PIPE THREADER THREADING MACHINE 3 DIES 1/2 TO 4 INCH WORKS GREAT#3T RIDGID 1224 PIPE THREADER THREADING MACHINE 2 DIES 1/2 TO 4 INCH WORKS ... moreGREAT. THIS IS A LATE MODEL THREADER. COMES WITH 3 DIES. 1/2-3/4 1-2 INCH AND 2 1/2-4 INCH DIES. All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
$
1450.00
6d 1h 52m 53s
0 bids
$135.00 Shipping
Condition: Used
Location: Jericho, United States
ALL TOOLS ARE IN EXCELLENT WORKING CONDITION UNLESS OTHERWISE STATED IN AD.
$
308.01
Buy It Now
Free Shipping
Condition: New
Location: Las Vegas, United States
Model RIDG 26192. NPT Threading. Pipe Dies only. High Speed. Full Factory Warranty.
$
595.00
Buy It Now
$59.95 Shipping
Condition: Used
Location: Baton Rouge, United States
**** Shipped either the same day or following day depending on when payment is made using UPS Ground so you get it fast!
$
6999.99
Buy It Now
Free Shipping
Condition: Used
Location: Bismarck, United States
Must have business name and address with forklift are loading dock or pick up at freight Center for free shipping
$
7499.00
Buy It Now
$500.00 Shipping
Condition: Used
Location: Bernardsville, United States
Here we have a Ridgid 1224 Pipe Threader for 1/2”-4” Pipe. Also included are the Ridgid 711 & 714 die heads with rolling stand.With questions call Alex.This ... moremachine is in great shape!!! It has a new cord, new foot pedal and barely used 2-1/2”-4” dies. You will receive exactly what’s pictured: nothing more — nothing less.Please check out our other listings for more Ridgid and Greenlee tools.
$
6799.99
Buy It Now
Condition: Used
Location: Eastpointe, United States
YOU ARE BUYING A USED Ridgid 1224 Pipe Threader 1/2"-4" Threading Machine W/ 2 Dies On Stand.
$
465.50
Buy It Now
$11.75 Shipping
Condition: New – Open box
Location: United States
YOUR LOOKING A "NEW" RIDGID 819, 51005 1/2"-2" NIPPLE CHUCK FOR YOUR RIDGID 300 535 700 1822 1224 PIPE THREADER! Ridgid 51005 Specifications Ridgid 51005 ... moreFeatures WHAT MAKES THIS TOOL SO COOL????.
$
7000.00
Buy It Now
Condition: Used
Location: O Fallon, United States
New Dies. No Box Posted with
$
3749.99
Buy It Now
$300.00 Shipping
Condition: Used
Location: Hallandale, United States
FLAT RATE FREIGHT TO THE LOWER 48 STATES. I am always happy to help.
$
295.50
Buy It Now
$9.75 Shipping
Condition: New
Location: United States
WE COMBINE SHIPPING. S0 CHECK OUT OUR OTHER ITEMS. FREE SHIPPING IF"BUY-IT-NOW" IS USED! THIS IS WITHIN THE 48 STATES(SLIGHTLY HIGHER TO HAWAII& ... moreCANADA) YOUR LOOKING AT A"NEW" COMPLETE" RIDGID#26192 HS(HIGH SPEED) DIE SET. DIE NUMBERS#1 THROUGH#4. FOR PIPE OR CONDUIT SIZES 2-1/2" TO 4" FOR A RIDGID 714 DIE HEAD. THESE ARE"NEW" IN THE FACTORY BOX! THIS IS GENUINE RIDGID BRAND! COMPARE THIS"NEW" SET TO A"NEW" RIDGID#26192 DIE SET WHICH SELLS FOR $308.44 THEN ADD ON SHIPPING COSTS! TO SEE THE COST OF A NEW RIDGID#26192 DIE SET. CHECK OUT THIS LINK. NOT HERE! YOU CAN"BUY-IT-NOW" FOR ONLY $255.50! INCLUDING FREE SHIPPING! SAVING YOU $50.00+ OVER THE PRICE OF A NEW RIDGID UNIT. AT AN APPROVED RIDGID VENDOR! WE ALSO HAVE GREENLEE 555. 854's& 855's ANS RIDGID BRAND PIPE THREADERS 300's, 1822's, 1224's, 535's, ETC. SO. PLEASE SEE OUR OTHER AUCTION ITEMS! Powered by On May-11-13 at 17:35:47 PDT. Seller added the following information:
$
359.99
Buy It Now
$29.99 Shipping
Condition: New – Open box
Location: Paramount, United States
Part Number‎26847. Item model number‎26847. Mounting Type‎Door Mount. Material‎steel. Product information. Batteries Included?.
$
521.92
Buy It Now
Free Shipping
Condition: New
Location: Las Vegas, United States
Model RIDG 34162. Ridgid 34162 Specifications Ridgid 34162 Features • Size: 3" NPT. • Model No.: 419.
$
7500.00
Buy It Now
Condition: Used
Location: Delta, United States
Diaphragm Valves. Roller Chains. Piston Valves. Valve Bodies and Manifolds. Electric Motors. Safety and Security. Motor Starters. Motor Drives.
$
139.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Toledo Pipe 46740 Power Cord 14 Gauge Wire fits RIDGID® 300 535 1224 Pipe Threading Machine - QTY 5. Replaces RIDGID® Part: 46740. RIDGID® Marks are trademarks ... moreof RIDGID, Inc and are used for product identification purposes only.
$
999.99
Buy It Now
$70.00 Shipping
Condition: Used
Location: Hallandale, United States
Ridgid 711 & 714 Pipe Threading Threader Die Head for 1224. I am always happy to help. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION.
$
499.00
Buy It Now
Free Shipping
Condition: Used
Location: India
ORIGINAL IMAGES OF THE ACTUAL PRODUCT ARE UPLOADED, WHAT YOU SEE IS WHAT YOU GET.
$
7799.99
Buy It Now
$400.00 Shipping
Condition: Used
Location: Staten Island, United States
Ridgid 1224 Pipe Threader Threading Machine with3 sets ofDie teeth. Ridgid 1224 Pipe Threader Threading Machine 3 sets of Dies. Excellent Condition. This ... moremachine works 100% fine. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND IT'S CONDITION.
$
23.00
Buy It Now
$12.45 Shipping
Condition: Used
Location: Cedarville, United States
MIXED LOT OF 2. RIDGID 1-2 NPT HS #2 UNIVERSAL & 1224 2 1/2-4 NPT HS #2 BOLT DIE. Model: 1224. Mixed lot of 2. We work hard to provide you with the lowest ... morefreight rates. Local Pick Up Model: 1-2.
$
187.99
Buy It Now
Free Shipping
Condition: New
Location: Erie, United States
Replaces RIDGID ® Part 26132. SDT 26132 711 Universal Self Opening die head 1/4"-2". Steel Dragon Tools® 26132 Model 711 Self Opening Die Head fits RIDGID® ... more1224 Pipe Threading Machine. Replaces RIDGID® Part 26132.
$
14.00
Buy It Now
Free Shipping
Condition: Used
Location: Cornell, United States
A4 husqvarna box.
$
74.99
Buy It Now
$12.48 Shipping
Condition: Used
Location: Moultrie, United States
O Will there be a loading dock or forklift?. We do not buy direct from the manufacturers or from authorized dealers. The serial numbers in the pictures ... moreare covered to prevent mischief by hackers or others that want to cause harm.
$
8900.00
Buy It Now
Condition: Used
Location: Little Rock, United States
New Dies. No Box Posted with
$
105.59
Buy It Now
Free Shipping
Condition: Used
Location: Des Moines, United States
Unsure if they are used or not. There is some rust on them. Only 2 included. Let me know if you have any questions! Thanks for looking!
$
100.00
Buy It Now
$17.78 Shipping
Condition: Used
Location: Williamsburg, United States
For sale is a lot of 3 Ridgid #1224 beveling guide’s 2-1/2”-4 guide’s #1,2,3. Storage Ewjbf11
$
3999.99
Buy It Now
$350.00 Shipping
Condition: Used
Location: Staten Island, United States
2015 Ridgid 535 Pipe Threader Threading Machine 300 1224 1822 Great Condition.
$
8399.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Reconditioned RIDGID® 1224 Power Pipe Threading Machine has been cleaned, repaired, and prepared for professional use. Each RIDGID® (Reconditioned) ... moremachine is disassembled, cleaned, inspected, painted, reassembled, and tested.
$
14207.89
Buy It Now
Free Shipping
Condition: New
Location: Las Vegas, United States
Model RIDG 26092. • 26192 - Dies. 1224 2 - 1/2" - 4 NPT HS. • (1) Threading Machine. • 83975 - Wrench, 3/4 COMB. • Threads A Variety Of Pipes: Black, ... moreGalvanized, Plastic-Coated Pipe, Along With Stainless Steel, Imc & Heavy-Wall Conduit, And Rod Up To 30 Rockwell C.
$
285.86
Buy It Now
Free Shipping
Condition: New
Location: Las Vegas, United States
Model RIDG 26847. (1) Chip Pan.
$
9099.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Steel Dragon Tools® (Reconditioned) RIDGID® 1224 Power Pipe Threader 26092 has been cleaned, repaired, and prepared for professional use. Each Steel ... moreDragon Tools® (Reconditioned) RIDGID® machine is disassembled, cleaned, inspected, painted, reassembled, and tested.
$
649.99
Buy It Now
Free Shipping
Condition: Used
Location: Redford, United States
You are buying a used Ridgid 714 2-1/2" - 4" NPT Pipe Threading Threader Die Head Fits 1224 (No Dies). There are no dies included in this sale, just the ... moredie holder.
$
190.00
Buy It Now
Free Shipping
Condition: Used
Location: Pennsburg, United States
RIDGID 1224 Pipe Threader Rear Centering Head Back Scroll 32407 711 714 Die Head. Used but in great shape. Includes the 6 set screws for installation. ... moreFree shipping. Tote 60
$
9737.50
Buy It Now
$485.00 Shipping
Condition: New – Open box
Location: Cornell, United States
$
499.00
Buy It Now
Free Shipping
Condition: Used
Location: India
ORIGINAL IMAGES OF THE ACTUAL PRODUCT ARE UPLOADED, WHAT YOU SEE IS WHAT YOU GET.
$
1399.99
Buy It Now
$350.00 Shipping
Condition: Used
Location: Staten Island, United States
WE COMBINE SHIPPING. S0 CHECK OUT OUR OTHER ITEMS. FREE SHIPPING! THIS IS WITHIN THE 48 STATES(and some parts of Canada) AN ADDITIONAL CHARGE TO OTHER ... moreAREAS. YOUR LOOKING A"USED" 161 JAM PROOF RIDGID THREADER IN EXCELLENT CONDITION! THIS UNIT THREADS 4"6" PIPE. IT CAN BE USED MANUALLY WITH A RATCHETING HANDLE(not included) OR CAN BE USED WITH A RIDGID, 300, 535, 700, OR 1822 POWER THREADERS WITH THE PROPER DRIVES(see pic from 1822 instruction manual) THIS UNIT"NEW" LISTS FOR $3267.88 WITHOUT THE OILER! CHECK OUT THIS LINK. CLICK HERE! THE OILER"NEW" which is new! LISTS FOR $247.10 CHECK OUT THIS LINK. CLICK HERE! FOR A COMBINED TOTAL OF $3.514.98! NOT HERE! YOU CAN"BUY-IT-NOW" AND GET FREE SHIPPING AND NO SALES TAX FOR ONLY $1.875.00! THE 161 MANUAL AND BLOW/ PARTS LIST IS ALSO INCLUDED AT NO CHARGE. PLEASE CHECK OUT OUR OTHER AUCTIONS! THIS IS A VERY NICE UNIT! CHECK OUT THE PIC'S! WITH THE FOLLOWING DESCRIPTION. No. 161 Cat# 36630 No. 161 Geared Threader Features Threads 4" 4-1/2" 5" 6" pipe with one set of dies. Jaw clutch prevents jamming. Simple adjustment for tapered or straight threads. Cam-type workholder sets instantly. Fully enclosed gearing. Right-hand only. Specifications Capacity Nominal Pipe Size: 4" 6" Weight: 158 lbs(42.3 kg) WE ALSO HAVE GREENLEE 555. 854's& 855's AND RIDGID BRAND PIPE THREADERS 300's, 1822's, 1224's, 535's, ETC. SO. PLEASE SEE OUR OTHER AUCTION ITEMS! Powered by The free listing tool. List your items fast and easy and manage your active items. On May-11-13 at 17:36:29 PDT. Seller added the following information:
$
3999.99
Buy It Now
$350.00 Shipping
Condition: Used
Location: Staten Island, United States
2015 Ridgid 535 Pipe Threader Threading Machine 300 1224 1822 Great Condition.
$
495.37
Buy It Now
Free Shipping
Condition: New
Location: Las Vegas, United States
SDT 51005 819 NPT Nipple Chuck Kit 1/2" 2" fits RIDGID Pipe Threaders The 819 nipple chuck is a quick and easy tool for holding short and close ... morenipples or studs for threading. Features: Holds short or close nipples for threading, Holds studs for threading, For use with 300 Power Drive. 300 Compact, 535 and 1822(with adapter kit) and 1224 Threading Machines, Model Number: 819, Nipple Chuck Kit: 1/2" 2" Includes: Standard Nipple Chuck includes insert and 5 adapters: 1/2" 3/4" 1" 1 1/4" and 1 1/2" Nipple Chuck body serves as 2" Adapter) Nipple Chuck Wrench, Our Live. Friendly, Experienced Customer Service team is ready to help! Customer Service hours are 8:00 am- 6:00 pm EST M-F Call 866-381-9121 or Message us through eBay. Customer emails and messages are responded to daily excluding weekends and holidays. Please call customer service to help with: Credit Card Payments, Package Tracking, RGA# Customer Pickups, Technical Support, Toolz Unlimited accepts MasterCard. Visa, American Express, Discover credit/debit cards and Paypal. Sales Tax: Toolz Unlimited collects sales tax on item shipped or picked up in Michigan(6% Toolz Unlimited is proud to offer fast and efficient shipping service to our customers. Utilizing UPS. USPS and Yellow Freight, we deliver your item to your home or business with the greatest efficiency and highest quality of service in the industry. Every order placed with Toolz Unlimited is picked and packed with care and shipped within one business day. Item Tracking: We automatically send tracking information to all customers with an email address so you can easily track your package. Please check your email and click on the supplied link from the shipping company to track your item. Exceptions are packages shipped through USPS. Handling and Delivery Times: Every package order placed with Toolz Unlimited is picked and packed with care and shipped the same day if payment is received before 3:00 PM Eastern Time zone. You can expect you item within 2-5 b
$
273.16
Buy It Now
Free Shipping
Condition: New
Location: Minooka, United States
RIDGID 26247. Jaw Insert Set,PK3. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Jurisdictions have varying ... morelaws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
$
4000.00
Buy It Now
$200.00 Shipping
Condition: Used
Location: Erie, United States
Steel Dragon Tools® 918 Roll Groover. Steel Dragon Tools® 918 Roll Groover Capacity Steel Dragon Tools® 1224 Pipe Threading Machine. The Steel Dragon ... moreTools® 1224 has a 1500 W, 2 HP induction motor with extra torque to handle large pipes.
$
3199.99
Buy It Now
Free Shipping
Condition: New
Location: Erie, United States
Steel Dragon Tools® 1224 1/4" - 4" Power Pipe Threader Threading Machine compatible with RIDGID® 26092 Dies and 711 714 Die Heads. The Steel Dragon Tools® ... more1224 threads a wide range of pipe including black, galvanized, and plastic-coated pipe, as well as stainless steel, IMC, and heavy-wall conduit.
$
75.00
Buy It Now
$16.40 Shipping
Condition: New
Location: Stafford, United States
RIDGID 32412 Centering Jaws Set for 1224 Threading Machine.
$
549.99
Buy It Now
Free Shipping
Condition: New
Location: Erie, United States
Replaces RIDGID ® Part 26152. Steel Dragon Tools® 26152 Model 714 Self Opening Die Head fits RIDGID® 1224 Pipe Threading Machine. Replaces RIDGID® Part ... more26152. Steel Dragon Tools 26152 714 Self Opening Die Head 2 1/2"-4".
$
169.99
Buy It Now
Free Shipping
Condition: New
Location: Erie, United States
These dies are compatible with RIDGID® 714 and 911 die heads and Steel Dragon Tools® 714 die heads. Steel Dragon Tools® 26192 HSS 2-1/2in. Pipe Dies compatible ... morewith RIDGID® 1224 for 714 Die Head. Erie Tools is not an authorized distributor of RIDGID® and/or Ridge products.
$
184.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Toledo Pipe RIDGID® 300 Upgrade Kit - Convert Old Style 300 to T2 / Foot Pedal fits RIDGID® 46740, 44505, 36642. Replaces Ridgid® Part Number: 46740, ... more36642, 44505, 46735, 50612, 50617, 50552. Toledo Pipe 36642 B294 Foot Pedal Switch fits RIDGID® 300 535 1224 Pipe Threading Machine.
$
237.99
Buy It Now
Free Shipping
Condition: New
Location: Erie, United States
Steel Dragon Tools® 764 1/4" - 4" Pipe Cutter 26212 for 1224 Pipe Threader. For use with Steel Dragon Tools® Model 1224 Threading Machine. Does not fit ... moreRIDGID® 1224. Wash hands after handling. Pipe Drain Cleaners.
$
59.99
Buy It Now
Free Shipping
Condition: New
Location: Erie, United States
Steel Dragon Tools® 1/4 in. This blade is compatible with Steel Dragon Tools® and RIDGID® 1224 Pipe Threading Machines. Compatible with RIDGID® 26092. ... moreRIDGID® 300 Parts. RIDGID® Reconditioned. RIDGID Motors and Parts.
$
130.00
Buy It Now
$21.34 Shipping
Condition: New
Location: Tampa, United States
9 Reasons To Buy From Us, 1. Low Prices. All year round, 2. Professional sales personnel, 3. Brand new merchandise, 4. Next business day shipping, 5. ... moreQuality name brand products, 6. All items in stock& ready to ship, 7. Competitive pricing, 8. Prompt service and repair, 9. Confirmation tracking information, Toolup Price: $123.93 + Always Free Shipping. + Full Factory Warranty. + 30 Day Return Policy. Make: Ridgid Part Number: 20113 Details: INCLUDES: 1) Replacement switch assembly for the Ridgid 1224 Threading Machine, Notice: All power plugs are 120V US power. PayPal preferred. But we do accept Credit/Debit Cards. Your winning bid or"Buy It Now" purchase is a legally binding contract that requires the bidder to follow through with payment for the auction. Payments are expected within 3 days. If you plan on purchasing more items from us and want to wait for combined shipping. Simply drop us an email just to let us know. For combined checkout. Including eBay store purchases, wait until all auctions have ended, then notify us to issue a single invoice for all items. All orders ship within 24- 48 hours of payment clearing. Monday- Friday with exception to National Holidays. All Shipments are processed and shipped from Las Vegas. Nevada. We cannot Ship to PO Boxes or APO Addresses. Orders shipped to APO or PO Box addresses will be cancelled. Shipping to the 48 contiguous US states only. No international shipping. We do not ship to Alaska. Hawaii or Puerto Rico. We do not ship outside of the 48 contiguous US states. We accept returns up to 30 days after you receive your order. Your order must be in good condition. And be in the original packaging. Restocking fee may apply. When you receive your shipment. Please note with the delivery driver any damage to the packaging. If possible, take pictures and send them to us- and we will assist you in replacing your order. You must notify us within 3 business days of damage from delivery. Customer responsible for return freight. Customer satisfaction is always our
$
599.00
Buy It Now
$45.00 Shipping
Condition: Seller refurbished
Location: Downey, United States
Up for sale refurbished RIDGID 711 Self-Opening universal Die Head #26132 for rigid 1224 W. NEW 1 to 2" NPT dies.
$
7599.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Steel Dragon Tools® (Reconditioned) RIDGID® 1224 Power Pipe Threader has been cleaned, repaired, and prepared for professional use. Each Steel Dragon ... moreTools® (Reconditioned) RIDGID® machine is disassembled, cleaned, inspected, painted, reassembled, and tested.
$
11535.29
Buy It Now
Condition: New – Open box
Location: Park City, United States
THREADING MACHINE IS NEW AND UNUSED AND IN GREAT CONDITION. NOMINAL PIPE CAPACITY. THROUGH DIE HEAD. REVERSE/OFF/FORWARD, HEAVY-DUTY ROTARY-TYPE AND INTEGRAL ... moreFOOT SWITCH. OILING PUMP. make Supersized seem small.
$
8399.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Erie, United States
The Reconditioned RIDGID® 1224 Power Pipe Threading Machine has been cleaned, repaired, and prepared for professional use. Each RIDGID® (Reconditioned) ... moremachine is disassembled, cleaned, inspected, painted, reassembled, and tested.
$
55.00
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Coldspring, United States
CHECK OUT OUR OTHER RIDGID PIPE TOOLS AND THREADERS.
$
49.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Toledo Pipe 46740 USA Made Power Cord 14 Gauge Wire fits RIDGID® 300 535 1224 Pipe Threading Machine. Replaces RIDGID® Part: 46740. RIDGID® Marks are ... moretrademarks of RIDGID, Inc and are used for product identification purposes only.
$
224.99
Buy It Now
Free Shipping
Condition: New
Location: Toledo, United States
Toledo Pipe 46740 Power Cord 14 Gauge Wire fits RIDGID® 300 535 1224 Pipe Threading Machine - QTY 10. Replaces RIDGID® Part: 46740. RIDGID® Marks are ... moretrademarks of RIDGID, Inc and are used for product identification purposes only.
$
67.99
Buy It Now
Free Shipping
Condition: Seller refurbished
Location: Coldspring, United States
REFURBISHED RIDGID 12R PIPE DIE, WITH RIDGID DIES. CHECK OUT OUR OTHER RIDGID PIPE TOOLS AND THREADERS.
$
259.99
Buy It Now
Free Shipping
Condition: New
Location: Eunice, United States
$
1349.99
Buy It Now
Free Shipping
Condition: New
Location: Erie, United States
The Steel Dragon Tools® Model 918 Hydraulic Roll Groover 48297 features a powerful, ergonomic 15-ton hydraulic ram in a compact, easy to transport unit. ... moreThe Steel Dragon Tools® 918 mounts quickly to a Steel Dragon Tools® Model 300 Power Drive, and a RIDGID® 300 Power Drive.
$
3150.00
Buy It Now
$249.00 Shipping
Condition: Seller refurbished
Location: Coldspring, United States
Ridgid 300 Pipe Threading Machine. CHECK OUT OUR OTHER RIDGID PIPE TOOLS AND THREADERS. We Have Refurbished and Sold Hundreds of Threaders! WHITE LEADS. ... moreOILER BUCKET & FOOT SWITCH. SWITCH BOX (PLUG AND PLAY).
1 2 3 4 5 6 7 8 9 10
 In 

Former Listings  
 
RIDGID 711 PIPE THREADER DIE FOR 1224 GREAT SHAPE. 100% RIDGID 100% RIDGID #3
RIDGID 711 PIPE THREADER DIE FOR 1224 GREAT SHAPE. 100% RIDGID 100% RIDGID#3 RIDGID 711 PIPE THREADER DIE FOR 1224 GREAT SHAPE All purchases are expected to be payed within 5 business days. Items will be shipped UPS or Fedex Ground. We do not ship to P.O. Box. Buyer will have to pay"duty" if shipped internationally Insurance can be purchased at an extra cost. PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD AS IS WITH NO WARRANTY. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR PHONE NUMBER IS 1 718 698 8400 WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY ... more10314. WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718 698 8400
*VERY NICE* RIDGID 535 PIPE THREADER WITH CART,* VARIABLE SPEED*, 300, 1224,1822
VERY NICE RIDGID 535 PIPE THREADER. COMES WITH A VARIABLE SPEED CONTROL. YOU CAN HAVE IT SPIN AT VERY LOW RPM'S OR VERY HIGH RPM'S. ITS A GREAT FEATURE TO HAVE)COMES WITH SELF OILER. EVERYTHING WORKS AND RUNS VERY WELL. IF YOU HAVE ANY QUESTIONS FEEL FREE TO CALL ME ANYTIME 971-563-7656 JUSTIN. 1/2 HP. Single-phase, 115V, 60 Hz, 8 Amp reversible motor. Ridgid speed chuck. RIDGID die head PIPE CAPACITY: 1/8"2" SINGLE PHASE 1/2 HP 115 VOLT REVERSIBLE MOTOR VARIABLE SPEED CONTROL PANEL SPEED CHUCK WITH REPLACABLE ROCKER-ACTION JAWS(3) REAR CENTERING DEVICE: CAM ACTION TURNS WITH CHUCK HEAVY DUTY FOR. OFF-REV. SWITCH SELF CENTERING PIPE CUTTER POSITIVE-LOCKING. 5 FLUTE CONE TYPE REAMER OIL PUMP THANK YOU FOR YOUR INTEREST
*VERY NICE* RIDGID 535 PIPE THREADER WITH CART, RIGID, GREENLEE, 300, 1224,1822
VERY NICE RIDGID 535 PIPE THREADER WITH ROLLING CART. EVERYTHING WORKS AND RUNS VERY WELL. IF YOU HAVE ANY QUESTIONS FEEL FREE TO CALL ME ANYTIME 971-563-7656 JUSTIN. 1/2 HP. Single-phase, 115V, 60 Hz, 8 Amp reversible motor. Ridgid speed chuck. RIDGID die head PIPE CAPACITY: 1/8"2" SINGLE PHASE 1/2 HP 115 VOLT REVERSIBLE MOTOR SAFETY FOOT SWITCH SPEED CHUCK WITH REPLACABLE ROCKER-ACTION JAWS(3) REAR CENTERING DEVICE: CAM ACTION TURNS WITH CHUCK HEAVY DUTY FOR. OFF-REV. SWITCH SELF CENTERING PIPE CUTTER POSITIVE-LOCKING. 5 FLUTE CONE TYPE REAMER SELF OILER WITH OIL PUMP THANK YOU FOR YOUR INTEREST
RIDGID PIPE THREADING CUTTER - PIPE CUTTING 4" FOR PIPE THREADER 1224
RIDGID 1224 CUTTER 764 1/4- 4" CAPACITY USED ON THE RIDGID 1224 PIPE THREADER CUTTER FULL-FLOATING. SELF CENTERING UNIT IS A SERVICE CENTER RECONDITIONED COMPLETE WITH CUTTER WHEEL LISTED AT $473.00 BID WITH NO RESERVE! n6gonr.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3En6gonr-13e0c09fd58-0xfa-
SDT Refurb RIDGID® 26092 1224 Pipe Threading Machine 92462 150A Stand
eBay Template v2.5 | | | | | | Titles and Descriptions SDT Reconditioned RIDGID® 26092 1224 Pipe Threading Machine 92462 150A This Product is Manufactured by STEEL DRAGON TOOLS. Video was made before doing other machines besides RIDGID 300* Our Reconditioned Ridgid 1224® Power Pipe Threaders are gone through with a fine tooth comb. Every Machine is is completely taken apart. Degreased, cleaned, painted, and reassembled with new parts and tested. Runs and Threads like a New Machine! Comes with a 1 Year Warranty! Replacement Check List Gear Box Bearings. Jaw Inserts. FWD/REV Switch. B296 Foot Switch. Heavy Duty Power Cord. Features Threads 1/4"2" pipe at 36 RPM and 2 1/2"4" at 12 RPM. The 1224 threads a wide range of pipe including black. Galvanized and plastic-coated pipe, together with stainless steel, IMC and ... moreheavy-wall conduit, as well as rod up to 30 Rockwell C. An induction motor insures sound levels well within the limits set by the regulating authorities. A special capacitor-start/ capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced. 1/4"2" Universal Die Head; 2 1/2"4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpiece with through-head oiling. Approved by CSA(115V only) Specifications Pipe Capacity: 1/4"4" 6mm-100mm) Bolt Capacity: 1/4"2" 6mm-50mm) Motor: 1 1/2 HP. Single-phase, 60 Hz or 50 Hz, induction type. Motor Control: Reverse/Off/Forward. Heavy-duty rotary-type and integral foot switch. Spindle Speed: 36/12 RPM. Gear Box: Two-speed gear box 3:1 ratio. Chuck: Hammer-type with replaceable rocker-action jaw inserts. Rear Centering Device: Cam action. Cutter: Model 764 full-floating. Self-centering 1/4"4" with F-229 cutter wheel. Reamer: Model 744. 1/4"4" blade-type. Oiling Pump: Self-priming. Gerotor-type, automatic-reversing, constant-flow. Standard Equipment Reconditioned
Ridgid 535 Pipe Threader 1/8" to 4" Threading Machine w 4PJ Die Head & Cart 1224
Ridgid 535 Pipe Threader 1/8" to 4" Threading Machine w 4PJ Die Head& Cart 1224 Best of the Best Legendary Ridgid 535 Pipe Threading Machine Includes 2 Ridgid Universal Die Heads and a Ridgid 4-PJ 2 1/2 to 4 Inch Geared Die Head. This Machine is the Workhorse of the Pipe Industry! Buy With Confidence Complete and Fully Tested! 1-Year Extra Warranty! 14-Day Money Back Guarantee! Super Fast Free Shipping! This genuine Ridgid 4" threading package includes the following: Ridgid 535 Pipe Threading Machine. The Ridgid model 535 is by far one of the most popular and reliable pipe threading machines Ridgid ever made. This machine includes a built-in automatic oiler. 1.75 gallon oil reservoir, chip tray, and a large machine top cover for keeping tools and pipe fittings handy. Also included is a front speed chuck with rocker-action ... morejaws. The rocker-action jaws inserts are replaceable. If ever needed. The front speed chuck centers and grips the work piece instantly. There is also a r ear centering chuck that turns with the front speed chuck. This machine also has a Ridgid high clearance carriage assembly. The carriage assembly includes a sharp reamer with no dings or chips anywhere on the reamer cone. The pipe cutter looks almost new and will cut pipe up to 2" The pipe cutter's cutting wheel does not have any chips. Breaks, or dings. This pipe cutter also turns very smooth. Absolutely no binding. Slop, or play when opening or closing. There is a handle on the front of the machine to move the carriage forward to start the thread and back after the thread is completed. Also included is a handy carriage-mounted pipe gauge. See photos 1 to 13. Ridgid's retail list price for a new 535 with the carriage is $6.952.80. Cart/ Stand with Wheels. This is a well-built and sturdy cart that will help make moving this pipe threading machine easy. The storage shelf area is handy for die heads. Fittings, and accessories! This cart is made in the USA and comes with a lifetime warranty. Not a cheap Chinese impo
Ridgid Model 1224 Pipe Threading Machine Cover - Cover Only - Pipe Threader
Ridgid Model 1224 Pipe Threading Machine Cover- Cover Only for Pipe Threader Description: This is a pre-owned item that is in good working condi tion. Comes with the unit pictured only. There is a crack in the cover(p lease see pictures for more details) What you see in the pictures is what you get. Payment: PayPal preferred. Items must be paid in full within 4 days of auction end or unpaid item dispute will be initiated and items will be re-listed. Shipping: To Lower 48 U.S. States ONLY! No International Shipping! Free Shipping! All items ship within 1 day of cleared payment unless otherwise stated. All items ship via UPS to your PayPal confirmed address. No local pickup. Terms of Sale: Upon receipt of your item please do not hesitate to contact us before leaving any feedback so that we may resolve any problems immediately. If in doubt please ... moreask before you bid. We only accept returns if item is not as stated in listing within 14 days of listing end. In the event that a return is agreed upon we will send you a return label for shipment back. This does not mean we will pay the postage on an item shipped back to us without our authorization. All items are sold as is. Where is. No warranties are given or implied. About Us: Welcome to PSDirect2u! We are an all around discount store that sells new and used items at liquidation prices. Generally. We sell in the following categories: Construction Tools and Equipment, Commercial Landscaping Equipment, Surveying Equipment, and ATV& Dirt Bike Sales. Everything is inspected in house by us. Here at PSDirect2U we strive to make your eBay experience an excellent one. We leave positive feedback for all buyers who complete transaction as promised. Our system is set up to leave feedback automatically. We would greatly appreciate good feedback as we are constantly trying to better our reputation on eBay. Contact Us: Office Hours: Monday-Friday 9:00AM-5:00PM Eastern Time If you email us after business hours or on the weekend we will be contacting you on the next working day.
RIDGID 26192 Pipe Dies 2 1/2" - 4" NPT HS 1224 Set of 4
Used.RIDGID 26192 Pipe Dies 2 1/2" 4" NPT HS 1224 Set of 4(Numbered 1. 2, 3& 4) Please reference pictures. You will receive the set of 4 dies as shown. These have been used, and have no box We are a surplus warehouse and have many great parts for great prices. We are honest and as accurate as possible. If we have more than one of this particular item. You may not receive the exact one shown in the pictures, however you will receive the same model. Some parts may be dusty or have slight cosmetic imperfections. Please reference photos and email any questions as returns are not accepted. International buyers subject to international shipping fees. TS042913A4
Ridgid Nipple Chuck 51005 819 1224 300 535
Ridgid Nipple 819 Nipple Chuck. Capacity 1/8"2" with appropriate holders. In good working condition. Includes wrench and 1" holder. As pictured, ready to go to work for you. Check out my feedback and bid with confidence. Thanks for looking and have a great week! electricdealsforyou- 1549
RIDGID 1224 PIPE THREADER *xcond* free shipping* NR
FREE SHIPPING* EXCELLENT CONDITION* THIS IS A RIDGID 1224 PIPE THREADER. IT COMES ON THE RIDGID CART WITH THE FOOT PEDAL AND 2 RIDGID DIE HEADS. FREE SHIPPING TO A BUSINESS ADDRESS WITH A FREIGHT DOCK. A FORKLIFT, OR TO A FREIGHT DOCK IN A MAJOR CITY CLOSE TO YOU. NO INTERNATIONAL SHIPPING. SEE MY OTHER AUCTIONS FOR OTHER HIGH QUALITY TOOLS* QUESTIONS? 760-419-6809* CALIFORNIA TIME* 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13e6302aa81-0x101-
RIDGID 714 26152 2-1/2" - 4" SELF OPENING DIE HEAD FOR 1224 PIPE THREADER - NR
This listing is for a threading die. We will be liquidating a lot of tools in the next week or so. So check back for other great deals. Make: Ridgid Model: 714 You will receive the exact item pictured. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e64fa922f-0xfe-
Ridgid 161 Geared Pipe Threader 4"to 6" Use with 700, 300 535 1224 machines-Used
Ridgid 161 Geared Pipe Threader 4"to 6" Use with 700. 300 535 1224 machines-Used DESCRIPTION: CONDITION: USED. VERY GOOD CONDITION, TEETH/DIES ARE ALL IN PLACE, NONE MISSING AND HAVE SOME USE ON THEM, MECHANICALLY THIS UNIT WORKS GOOD. HAS SOME CHIPS AND NICKS ON THE HOUSING, ALL FROM NORMAL WEAR AND TEAR. SERIAL# IS INDICATED IN THE PICS. IT WEIGHS APPROXIMATELY 120- 150 LBS, WITH PACKAGING, SO IT WILL BE COSTLY TO SHIP. BUYER CAN ARRANGE LOCAL PICK-UP FREE OF CHARGE. IF MORE FEASIBLE. WILL BE SHIPPED FEDEX GROUND SHIPPING AND HANDLING POLICY: UNITED STATES: OUR ITEMS CAN BE SHIPPED VIA ANY OF THE FOLLOWING METHODS: USPS ECONOMY/FIRST CLASS/PRIORITY/PARCEL POST; UPS; FEDEX DISCOUNTED SHIPPING FOR EACH ADDITIONAL CANADA: USPS EXPRESS/PRIORITY INTERNATIONAL; FEDEX OR UPS; DISCOUNTED SHIPPING FOR EACH ADDITIONAL OTHER INTERNATIONAL ... moreLOCATIONS: USPS EXPRESS/PRIORITY INTERNATIONAL; FEDEX OR UPS; DISCOUNTED SHIPPING FOR EACH ADDITIONAL ITEM(INTERNATIONAL CUSTOMERS PLEASE ALLOW UP TO 14 DAYS FOR DELIVERIES. ALSO INTERNATIONAL CUSTOMERS ARE RESPONSIBLE FOR ANY IMPORT DUTIES. TAXES OR CUSTOMS RELATED CHARGES. SHIPPING 6 DAYS PER WEEK. ITEMS PURCHASED BY 12-NOON PACIFIC STANDARD TIME WILL USUALLY SHIP SAME DAY OR WITHIN 24 HOURS SHIPPING WILL BE VIA US POST OFFICE(ECONOMY/PRIORITY/FIRSTCLASS/PARCEL POSTS) WHICH MEANS THAT IT MAY TAKE FROM 1-8 DAYS TO RECEIVE YOUR ITEM; IF SHIPPING INTERNATIONALLY. IT MAY TAKE UP TO 14 DAYS WILL DISCOUNT SHIPPING IF PURCHASING MORE THAN 2 ITEMS DURING A SINGLE PURCHASE ENSURE SHIPPING ADDRESS IS CORRECT BEFORE PURCHASE IS COMPLETED CONTACT US WITH ANY QUESTIONS ABOUT ITEMS PRIOR TO BIDDING OR PURCHASING IF BUYER HAS NOT PAID FOR ITEM WITHIN 3 DAYS AN UNPAID ITEM CASE WILL BE OPENED WITH EBAY ALL ITEMS ARE ALWAYS PACKED SECURELY IN STURDY PROTECTED ENVELOPES/BOXES/CONTAINERS PAYMENTS: MUST BE MADE WITHIN 48 HOURS*WE ACCEPT PAYMENTS VIA PAYPAL*CALIFORNIA RESIDENTS WILL BE CHARGED 8.75% SALES AND SHIPPING TAX RETURNS& EXCHANGES: 14-DAY RETURN POLICY RETURNS ACCEPTED IF
Ridgid 1224 1/4" to 4" Pipr Threader rigid
Ridgid 1224 Pipe threader Threading machine This one threads up to 4 inches ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13e6ae23d3b-0x102-
RIDGID 300 COMPACT, Greenlee, Pipe Threader, Rigid, 1822, 535, 1224
Ridgid 300 Compact Specifications: SELF LUBE SYSTEM WITH RE SERVOIR THAT RECYCLES THE OIL AS YOU THREAD. Motor: 1/2 HP. Universal, reversible single-phase• HZ: 25-60. 115VAC 36 RP M( NO LOAD) Capacity: 1/8" 2" Switch: Recessed On/Off/Reverse Ridgid 75602 Includes: 1) No. 811A Quick-opening die head. Heavy Duty Foot Switch. 1) Set 1" 2" High Speed Steel Dies( 47770) 1) No. 360 Cutter with E-1032 Cutter Wheel. 1) No. 344 Reamer. Quiet Operation"IMPORTA NT" the machine will ship without threading oil. And clean up. Serial No. Y OU CAN BUY THIS MACHINE FROM ME FOR $2.400.00 CALL IF INTERESTED IN BUYING Ships only to the lower 48 US territory only! International customers must schedule pick up. Or I may quote the freight as you wish! By freight only nicely packaged in a pallet! Must have a loading dock or commercial ... moreaddress if no t. Will have to pick it up from the near freight terminal If you have a question about this machine or other products in my Store. Feel free to call 8 to 5( M-F) 305-586-7186 LIFETIME WARRANTY The reputation of RIDGID® tools is the result of consistent product quality and years of pride in workmanship. Rigorous checks and controls. From raw materials to packaged products. Ensure product confidence widely accepted as the benchmark of the professional trades. RIDGID® tools are warranted to be free of defects in workmanship or material for the life of the tool. Expendable Materials. Such as pipe or drain cleaning tools, rods and cables. Etc. are not covered by this warranty. Obviously, failures due to misuse. Abuse, or normal wear and tear are not covered by this warranty. NO OTHER WARRANTY EXPRESS OR IMPLIED. APPLIES, INCLUDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. No employee. Agent, dealer, or other person is authorized to alter this or make any other warranty on behalf of RIDGE TOOL COMPANY. To obtain the benefit of this warranty. Deliver the complete product prepaid to RIDGE TOOL COMPANY or any RIDGID® AUTHORIZED SERVICE CENTER. Pi
RIDGID DRIVE SHAFT FOR 300 141 161 4PJ 1822 1224
RIDGID DRIVE SHAFT FOR 300 141 161 4PJ 1822 1224 RIDGID DRIVE SHAFT FOR 300 141 161 4PJ 1822 1224. THE SHAFT IS USED BUT WORKS GREAT. PLEASE LOOK AT ALL OF THE PICTURES SO YOU CAN SEE THE CONDITION OF THE SHAFT. 36`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*70%60%3E36%60-13e6ca11b31-0xf7-
**NICE** Ridgid 535 Pipe Threader, Rigid, 300, 1224, 1822, Bolt
This is a NICE Ridgid 535 Pipe threader! Almost $6.500 NEW! SAVE $$$ Works Great! Nice shape. As you can see! INCLUDES- Ridgid 535 Pipe Threader/ with foot control! Rolling Cart· Ridgid Carriage· Ridgid Die Head· Ridgid Reamer· Ridgid Cutoff Tool· Ridgid Die Teeth 2 Sets! 1/2"3/4" and 1-2" Features: Large 1.75 gallon oil tray. Large chip tray. Generous top cover for keeping tools and fittings handy. Ridgid carriage. Speed chuck with Ridgid jaws. Centers and grips work piece nicely. Can be used with geared threaders Models 141 and 161. Uses Model 811. Model 500b, Model 816/817 semiautomatic.Or Model 815A self-opening die heads Length gauge for quick. Accurate cut-off. Approved by CSA to CSA and UL standards(115V only) Specifications: Pipe Capacity: 1/8"2" 3mm-50mm) 2 1/2"4" 62mm-100mm) ... more4"6" 100mm-150mm) with 141 and 161 geared threaders. Bolt Capacity: 1/4"2" 6mm-50mm) Motor: 1/2 HP. Single-phase, 115V, 50/60 Hz, 15 amp reversible universal motor. 36 RPM) Switches: FOR/OFF/REV and Integral safety foot switch. Chuck: Speed Chuck™ with replaceable jaw inserts(3) Rear Centering Device: Turns with chuck. Cutter: self-centering. Full-floating. One Standard. No. 360 Wheel-Type Cutter. Pipe capacity 1/8"2" 3mm-50mm) bolt capacity 1/4"1" 6mm-25mm) Spindle Speed: 36 RPM standard(no load) Reamer: 5-flute cone. RH, 1/8"2" 3mm-50mm) Oil Pump: Self-priming gerotor oil pump. This is from a business bankruptcy. Hard to come by a nice one. Comes as shown in pics! Thanks! Payment: All payments must be received within 1 day of the end of the auction. Seller retains all rights to withdraw an auction or deny sale of the merchandise. A Positive Feedback will be left for all successful transactions. By placing a bid on this auction. You agree to all the terms and conditions of the auction. If you have any questions or concerns please ask us before placing bids. PAYPAL only. Ship to confirmed/Verified address only. No Personal c
Ridgid 714 2 ½”-4” 1224 power drive pipe threader 26152 die head with 26192 dies
This is like new Ridgid Tool 714 P/N 26152 2 ½” to 4” self opening die head with thru the head oiling system with 2 ½” 4” Ridgid 26192 dies that fits Ridgid model 1224 power drive threader. This die head sells new retail without the dies for over $950 being sold here with No Reserve or Buy it Now!
RIDGID 418 OILER BUCKET PUMP FOR 300 PIPE THREADER 535 1224
This is a No Reserve Auction. Highest bidder takes it! Up for Auction/Sale is this Preowned Ridgid 418 Oiler Bucket w/ Pump Unit is 100% mechanically sound and in good working conditions. Your are bidding on what you see in pictures only It is a preowned unit so it has its normal scratches and scuffs. Ready to work as soon as you recieve it. Will sell to the highest bidder. We do accept refunds if unit is not as listed. Pictured or damaged in transit. We care for your repeated business. Customer satisfaction is our upmost concern. Thank you and best of luck bidding! $24.00 Shipping Lower 48 States. Price includes shipping Insurance. Our#1 concern is that your happy with your purchase. Happy with our service, and happy with ebay in general. If unit is not as mentioned or if its damaged in transit you can send it back for a full hassle free ... morerefund. Please do your research and make sure this item fits your needs. Our return policy is great. We strive for your positive feedback and 5 star ratings. We simply want your repeated business. All items are sent Insured to guarantee its safe arrival. Unit will ship on the following 1 day after your payment is recieved. We have items ready to ship by the end of auction. We are an e-commerce business. We sell strictly online. We do not offer local pickups. We don't have the proper place of business or the proper insurance requirements to greet our customers. We are registered with paypal and feel its the fastest and safest way to complete the transaction. We look forward to serving your tool and equipment needs. Any questions please send us a message through ebay messeges. Thank you. Best of wishes, and good luck bidding! We look forward to your business. Please google model number for manufactures specs and owner testimonials:
ridgid 714 1/2" 4 self opening die head fits 1224 pipe threader machine
For sale a lightly used ridgid 714 1/2" 4 self opening die head for 1224 pipe threader and it comes with 4 dies which are very sharp/ does not ship out of the USA/ payment is due right after item is won Posted with
Ridgid 1224 Pipe Threader w foot pedal reamer cutter Heads 4"
RIDGID 1224 4" PIPE THREADER WITH TOOLS THANKS FOR LOOKING a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-13e8319fc53-0xf5-
Ridgid #3 Straight Pipe Reamer 34950 3/8" - 3" Greenlee Conduit 300 535 700 1224
Ridgid#3 Straight Pipe Reamer 34950 3/8" 3" Greenlee Conduit 300 535 700 1224 Genuine Ridgid Ratcheting Number 3 Straight Pipe Reamer Reams 3/8 to 3 Inch Pipe With Ease! Buy with Confidence Fully Tested! 14 Day Money Back Guarantee! 1 Year Extra Warranty! Super Fast Free Shipping! This is a genuine Ridgid number 3 ratcheting straight pipe reamer in almost new condition. This reamer has a long taper design that will not dig in and bury itself inside the pipe like the spiral reamers sometimes do. A straight reamer is also much easier to re-sharpen(if ever needed) than a spiral type reamer. This reamer is suitable for use with power drives. This reamer has been kept clean and well oiled. There is no rust and no dings on the cutting edge. Comes with a Ridgid handle. Not just a piece of pipe. Ridgid part number 34950. There is some light ... moreor minor scratches and shelf wear on the ratchet part of this reamer. But this will not affect the use or performance of this reamer in any way. You will not be disappointed with this bad boy! Yep! There are cheaper reamers made in China listed on eBay. But don't settle for cheap junk! If you are looking for a top quality Ridgid reamer in new condition with a 14-day money back guarantee and a 1 year warranty from an experienced and reputable eBay seller, this is the reamer for you! Ridgid’s retail list price is $405.25, plus sales tax in most states. Here is your chance to make your life easier! You can now purchase this item at a fraction of the retail price and save a lot of money! Buy It Now For Only $239.99 and Save Over $165.00 Includes Free Shipping and Insurance Please Review My Feedback Click on the underlined and buy with confidence. I only offer good quality new and used tools in top condition you will be proud to own! Visit My eBay Store Please click on the underlined Visit My eBay Store and take a look at my other similar items! PayPal PayPal is an easy payment method which is very safe. Fast, and secure. When using PayPal your item is covered by the PayPal B
Ridgid 254 Spiral Pipe Reamer 21/2" - 4" 34960 300 535 700 1224 Conduit Greenlee
Ridgid 254 Spiral Pipe Reamer 21/2" 4" 34960 300 535 700 1224 Conduit Greenlee Genuine Ridgid 254 Spiral Pipe Reamer Buy With Confidence Fully Tested! 14-Day Money Back Guarantee! 1-Year Extra Warranty Super Fast Free Shipping! This is a genuine Ridgid ratcheting 254 spiral pipe reamer and it comes with a genuine Ridgid handle. Not a piece of pipe. Reams pipe from 2 1/2" to 4" This pipe reamer is super sharp. No chips, breaks, or dings on any of the cutting edges. This pipe reamer shows very few signs of prior use. Everything moves and turns as smoothly and tightly as a well-made Swiss watch. You will not find any slop or play anywhere on this bad boy! This pipe reamer has been kept dry, well oiled, and clean. There is no rust anywhere! This pipe reamer is clean enough on the inside and outside that you could eat your ... morelunch off of it! Take a look at all of the photos and see if you agree! This pipe reamer should give you(and maybe your grand children) a lifetime of trouble-free service. Ridgid catalog number 34960. Yep! There are cheaper pipe reamers made in China listed on eBay. But do not settle for cheap junk! I do not think you will find a nicer used Ridgid 254 spiral pipe reamer anywhere. If you are looking for a quality Ridgid spiral pipe reamer in top condition with a 14-day money back guarantee and a 1-year warranty, from an experienced and reputable eBay seller, this is the pipe reamer for you! Ridgid's retail list price is $422.65. Plus sales tax in most states. Here is your chance to make your life easier! You can now purchase this item at a fraction of the retail price and save a lot of money! Buy It Now For Only $249.99 and Save Over $172.00 Includes Free Shipping and Insurance. Please Review My Feedback Click on the underlined and buy with confidence. I only offer good quality new and used tools in top condition you will be proud to own! Visit My eBay Store Please click on the underlined Visit My eBay Store and take a look at my other similar items! PayPal PayPal is an easy p
CLEAN!! RIDGID #1224 POWER PIPE THREADING MACHINE
aims CLEAN! RIDGID#1224 POWER PIPE THREADING MACHINE read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST VIDMAR EXTRAVAGANZA! Reliable Tools just received a varied selection of matching Vidmar Stanley Lista type tool cabinets. Be sure and check our listings in the upcoming days. These are matching cabinets in very good condition. So bid now while they last! There are different drawer configurations, so check for the ones you need. Made in the U.S.A. by Ridgid. This is a used Power Pipe Threading Machine in EXCELLENT condition. Model# 1224 Serial# EB12069-D97 Features: Threads 1/4"2" pipe at 36 rpm and 2.5"4" at 12 rpm. The 1224 threads a wide range of pipe including black. Galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as ... morewell as rod up to 30 Rockwell C. An induction motor insures sound levels well within the limits set by the regulating authorities. A special capacitor-start/ capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced. Constant and proper lubrication of dies and workpiece with through-head oiling. CSA approved. Approved to UL standards(NRTLC) Includes all tooling shown in pictures. Specifications: Pipe Capacity: 1/4" to 4" 6mm to 100mm) 4" to 6" 100mm to 150mm) with 161 Geared Threader. Bolt Capacity: 1/4" to 2" 6mm to 50mm) Spindle Speed: 12/36 rpm. Gear Box: Two-speed gear box 3:1 ratio. Chuck: Hammer-type with replaceable rocker-action jaw inserts. Rear Centering Device: Cam action. Pump: Self-priming. Gerotor-type, automatic-reversing, constant-flow. Motor Control: Reverse/Off/Forward. Heavy-duty rotary-type and integral foot switch. Motor: 1-1/2 Horsepower. Induction type. Electrical: 120 Volt. Single Phase, 15 Amps, 60 Hz. Overall Dimensions: 28" x 48" x 46" tall. Comes as shown in pictures. To go to The Manufacturers Website: Check out the photos! if you have any other questions. Give
RIDGID 1224 PIPE THREADING MACHINE UP TO 4" W /CLOSED STAND
AVAILABLE FOR RENTAL RIDGID MODEL 1224 PIPE THREADING MACHINE.CAPACITY 1/4"4" PIPE COMPLETE WITH 711 1/4"2" DIE HEAD& DIES,714 21/2"4" DIE HEAD& DIES,744 REAMER,764 CUTTER,FOOT SWITCH& 200A CLOSED CABINET STAND.Unit in good condition it was service by our tool repair department. Will ship via our truck within 25 miles of our location.Also can be pickup at our warehouse Garden City Park Long Island New York 11040.we also can strap to a pallet 60"x40"x45" HIGH.Weight 715# BUYER PAYS FREIGHT) ADVISE IF YOU HAVE LOADING DOCK OR FORKLIFT TO UNLOAD& THIS IS A BUSINESS LOCATION WE WILL ALSO NEED YOUR PHONE# ANY QUESTIONS CALL 516-741-3198. Check out my!
Ridgid 419 Nipple Chuck 2 1/2" NPT For Ridgid 1224 Pipe Threader
Description Ridgid 419 Nipple Chuck 2 1/2" NPT For Ridgid 1224 Pipe Threader Excellent working and cosmetic condition PLEASE EMAIL ME WITH ANY QUESTIONS Payment All purchases are expected to be payed within 5 business days. Shipping All Items will be shipped USPS/ Fedex Ground or Freight(LTL) Heavier Items that are listed with freight cost will be shipped via Freight Liner. Freight Charges posted are from our dock to a Business with unloading capability. If you shall require Lift Gate service. And or residential delivery, there will be an additional cost* Please make sure your tel# is posted on Ebay for Freight Co. to get intouch with you at time of delivery. If tel# is not provided. Delivery of freight will be delayed. We do not ship to P.O. Box unless you have no physicall delivery address Buyer is responsible to pay"DUTY& ... moreTAXES" if shipped internationally. Shipping Insurance can be purchased at an extra cost. All items are insured with fedex ground for up to $100 at time of shipping Terms of Sale PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION TO THE BEST OF OUR KNOWLEDGE. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR CONTACT NUMBER IS 718-698-8400 Contact Us Victory Tool Store location 3521 VICTORY BLVD. STATEN ISLAND. NY 10314 WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718-698-8400
Ridgid 444 pipe threader machine Cap.2 1/2"-4" similar to Ridgid model 1224
RIDGID MODEL 444 AUTOMATIC THREADING MACHINE. 2 1/2to 4" Pipe Threader 27A 115Volt IN LIKE NEW CONDITION. EVERYTHING ON THIS MACHINE WORKS PERFECT. THIS MODEL IS SIMILAR TO THE RIDGID 1224, AS IT CAME BEFORE THE 1224. EXTRA DIES INCLUDED. IF YOU HAVE ANY QUESTIONS ABOUT THE LSITING THEN CONTACT ME BY EMAIL. I CAN SEND MORE PICTURES OR FILM OF THE MACHINE WORKING. WEIGHS ABOUT 700 POUNDS, PICK UP ONLY. IF YOU LEAVE ME A PHONE NUMBER I CAN CALL YOU IF YOU PREFER THAT WAY OF COMMUNICATION.
* VERY NICE * RIDGID 300 PIPE THREADER, RIDGID OILER/BUCKET, RIGID 535 1822 1224
VERY NICE RIDGID 300 PIPE THREADER Specifications Motor: 1/2 HP. 8 Amp, Reversible Motor, Single-Phase, 50/60 Hz, 115V. Switch: Heavy-Duty FOR/OFF/REV and Integral Foot Switch. Chuck: RIDGID® Speed Chuck with Replaceable Rocker-Action Jaws. Spindle Speed: 36 RPM. Rear Centering Device: Cam-Action Turns with Chuck. Support Bar: Heavy-duty(2) Everything works and runs excellent! INCLUDES- Ridgid 300 Pipe Threader/ with foot control! Ridgid Pipe Legs/Stand· Ridgid Carriage· Ridgid Die Head· Ridgid Reamer· Ridgid Cutoff Tool· Ridgid 1-2" Die Teeth Also comes with a Ridgid Oiler! Thanks For Your Interest! Posted with
RIDGID 1224 PIPE THREADER REAR SCROLL CAT# 26952
Description RIDGID 1224 PIPE THREADER REAR SCROLL RIDGID CAT# 26952 CONDITION: NEW PLEASE EMAIL ME WITH ANY QUESTIONS Payment All purchases are expected to be payed within 5 business days. Shipping All Items will be shipped USPS or Fedex Ground. Heavier Items that are listed with freight cost will be shipped via Freight Liner. Freight Charges posted are from our dock to a Business with unloading capability. If you shall require Lift Gate service. And or residential delivery, there will be an additional cost. Please make sure your tel# is posted on Ebay for Freight Co. to get intouch with you at time of delivery. If tel# is not provided. Delivery of freight will be delayed. We do not ship to P.O. Box. Buyer is responsible to pay"DUTY& TAXES" if shipped internationally. Shipping Insurance can be purchased at an extra cost. All ... moreitems are insured with fedex ground for up to $100 at time of shipping Terms of Sale PLEASE BE ADVISED THAT ALL ITEMS ARE SOLD IN USED CONDITION UNLESS SPECIFIED AS BRAND NEW. ALL ITEMS ARE SOLD"AS IS" WITH NO WARRANTY UNLESS SPECIFIED DIFFERENTLY IN LISTING. YOU ARE BUYING USED EQUIPMENT AT USED PRICES. WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION TO THE BEST OF OUR KNOWLEDGE. ALL ITEMS ARE SOLD IN GOOD TO GREAT WORKING CONDITION. IF YOU ARE NOT HAPPY WITH YOUR PURCHASE PLEASE CONTACT US BEFORE LEAVING A NEGATIVE FEEDBACK. OUR CONTACT NUMBER IS 718-698-8400 Contact Us Victory Tool Store location 3521 VICTORY BLVD. STATEN ISLAND. NY 10314 WE ARE OPEN 8AM TO 6PM MON-SAT. YOU CAN CALL US AT 718-698-8400
NICE!!! Ridgid 535, 4P-A, Drive Shaft, Cutter, Pipe Threader, Rigid, 300, 1224,
This is a nice clean used Ridgid 535 pipe threader! Works Great! Excellent condition. As you can see! INCLUDES- Ridgid 535 Pipe Threader· Ridgid 4P-A. Ridgid 450 Stand. Ridgid Drive Shaft· Ridgid Carriage· Ridgid Die Head· Ridgid Reamer· Ridgid Cutoff Tool. Ridgid Foot Pedal· Ridgid Die Teeth Comes as shown in pics! Thanks! Payment: All payments must be received within 1 day(including holidays) of the end of the auction. Seller retains all rights to withdraw an auction or deny sale of the merchandise. A Positive Feedback will be left for all successful transactions. By placing a bid on this auction. You agree to all the terms and conditions of the auction. If you have any questions or concerns please ask us before placing bids. PAYPAL only. Ship to confirmed/Verified address only. No Personal checks. Shipping: ... moreItem Shipped from: Portland. OR. TO COMMERCIAL ADDRESS ONLY. RESIDENTIAL IS AN EXTRA $50. LOWER 48 Only.All other destinations will be an extra charge. Thank you. Item will be shipped within Three business days from the completion of auction. Order will be processed within two business days. I ship to PayPal Verified/Confirmed address only. No Exceptions. If a package is returned to us due incorrect address or recipient non-availability to accept. There will be a shipping charge to ship package for the second time even if the original sale was shipped free of charges. Terms of Sale: Please read the above terms.thanks. Posted with
RIDGID 1224 PIPE THREADER THREADING MACHINE 1/2" - 4" W/ 3 DIES VG - EXCELLENT
Paypal. Visa, Mastercard, American Express. We would like this transaction to be a great one for you so please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. RIDGID 1224 PIPE THREADER THREADING ... moreMACHINE 1/2" 4" W/ 3 DIES VG- EXCELLENT DESCRIPTION: ~ Up for bid is a good working Ridgid 1224 pipe threader. 120V. 1/2" to 4" threading capacity. 3 good dies with good teeth: 1/2" to 3/4" 1" to 2" and 2-1/2" to 4" A nice threader that has very little use. The freight shipping weight is 610lbs on a secured pallet. If picking up locally. We can load your vehicle with the forklifts. We palletize and/or load the freight trucks for free. gsrx_vers_522(GS 6.6.2(522)
Ridgid B-293 FOOT PEDAL SWITCH 300 535 1822 1224 PipeThreader *gr8cond* NR
GREAT CONDITION* THIS IS A RIDGID B-293 FOOT PEDAL SWITCH. BUYER TO PAY $18 FOR SHIPPING AND INSURANCE TO LOWER 48 STATES. NO INTERNATIONAL SHIPPING. SEE MY OTHER AUCTIONS FOR OTHER HIGH QUALITY TOOLS* QUESTIONS? 760-419-6809* CALIFORNIA TIME*
Ridgid 1224 Power Pipe Threader 4" Capacity Demo Model in Excellent Condition
Ridgid 1224 Power Threader Demo unit in excellent condition. Comes with small and large die head. Dies for 1/2" thru 4" foot pedal, cutter and reamer. Shipping weight 500 lbs We have a surplus of used Ridgid tools and equipment including Ridgid 300's. Email us with your needs! Save on shipping with multiple purchases! Email us or call Mark Griffith at 1-800-333-2151 ext 470 for further questions. Shipping: All items will be shipped via UPS Ground(signature required for transactions over $250.00) except items requiring freight services. Residential addresses or addresses without unloading facilities will need to pick up freight at local terminal. Email us or call Mark Griffith at 1-800-333-2151 ext 470 for a quote and specify if shipping to a residential address or a business address with unloading facilities. I think you will ... moreagree that our freight rates are very competitive. Of course we always try to get the item out as quickly as possible. But due to high demand it may take longer. All used items except those marked“as-is” will be cleaned, tested and any needed repairs done prior to shipping. Please allow two weeks for delivery. New items will normally ship that business day. Payment: Payment can be paid by Calling 1-800-333-2151 ext 470. We can accept Visa. Mastercard and American Express over the phone. Call for other payment methods. Payment is due within seven days, unless other arrangements are made. If payment is not made within seven days a dispute will be opened through eBay. Sales Tax: State and local tax will be calculated based on the customers ship-to address provided by the customer and added to the final sales order total. Where applicable, unless the customer provides F& M Mafco, Inc. with a tax exemption certificate. All Items are subject to prior sale!
RIDGID ® 1224 Pipe Threading Machine Die Head 2 1/2 - 4 in pipe
I have a Ridgid 1224 die head fits 2 1/2 to 4 inch pipe. Its in excellent condition has BRAND NEW dies installed. everything works like new bid with confidence! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13f3f5ad0df-0xfe-
Ridgid 4-S Pipe Cutter 300 700 141 1224
This is a Ridgid 4-S pipe cutter. It will cut 2"4" pipe. With questions. Please email or call Alex at 908-400-0894. Please check out our other listings for more Ridgid pipe threading equipment. Posted with
REMS Gigant Pipe Threader 4 Ridgid 1/2"-4" pipe Pls Read Listing 1224 300 1822
PLEASE READ ALL. Call before purchasing. You are looking at a REMS brand pipe threader, model Gigant#4000. This threader was made in Germany, and is a heavy duty/professionally used model in Europe. I purchased it sight unseen over two years ago, and the motor was shot. It sat in my shop till this past winter, when I took the motor off and had it repaired at Graham Electric in Gaylord. He did an Armature rewind and repaired the field coils. So the motor is essentially new. Tonight I set it all back up, and tested the oiler pump- it works perfectly. It comes with two self releasing, adjustable die heads, one for 1/2"2" and one for 2.5-4" The dies in the smaller head are marked 1"2" and I have another set of dies marked 1/2"3/4" The dies in the larger head are marked 2.5-4" Now for the bad. It is missing ... morethe oil/chip pan. Also, I can't seem to figure out how to make the clamping jaws close up any tighter than appx. 1.5-2" They are adjusted with the T-handle wrench, but I just don't see them being physically being able to close any smaller. Not sure if you have to change out the clamping jaws to thread smaller pipe(doesn't seem logical) or if I'm just not seeing something/missing parts. I found a complete parts breakdown/instruction manual online, but it is in German: This threader is a well built, professional quality German tool. Parts are available from two REMS distributors here in the US, although their customer service people are not all that helpful. Given the capabilities of this model, I feel it's a steal at $1,750. More pics are available for emailing, please cll 231.753.6185 for more pics and further details. This threader is being sold, as is, as pictured" all threader parts in the pictures are included. My 14 day return policy will not be in effect on this item. Please allow up to 3 days handling time as this will be slightly complicated to ship. All statements are true to the best of my knowledge. If you don't see it, please ask
Ridgid 1224 pipe threader rigid conduit VGC 1/2" to 4" has 3 dies and cart
Guaranteed very good condition Ridgid 1224 threader. 3 die heads, cart. 120v. Flat shipping of 300.00 to the lower 48, SERIOUS OFFERS CONSIDERED.
Ridgid 714 die head 2-1/2" to 4" pipe, 1224, 161, 300, dies, parts, lots more.
Hi We've got a bunch of die heads for the Ridgid 1224 pipe threader. In this listing we're selling the 714 model. Receding self-opening die head, which is for 2-1/2" to 4" pipe. These will come with 1 good set of dies. These are all in very good condition with no known problems. Some in excellent cosmetic condition. One unit has surface rusting due to moisture condensation, which doesn't affect it's operation, just the appearance. You're buying 1 for the stated price. We also have several of the 711 heads. Which thread 1/4" to 2" pipe, 500 and 500B die heads, plus more heads. We have several 1224 threaders we'll be listing soon. As well as a 161 hogs head, for 4" to 6" pipe. We also have over 80 sets of new pipe and bolt dies. Universal die heads for the 300 and 535 machines, plus several ... more300 model threaders in the shop, waiting their turn for rebuilding.
RIDGID 26192 HS,1224, PIPE DIES , 2-1/2"- 4 NPT, Ridged Universal BU, And KW
See pictures. Posted with c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13f8d287d0b-0xee-
Ridgid 300 T-2 pipe threader for 1/2" to 2" pipe exc cond 1224 535 700
Hi This listing is for a Ridgid 300 T-2 pipe threader in great condition. We re-conditioned it. So it operates as it should. It comes with 2 die heads. 2 sets of dies, Ridgid oiler, so you can thread from 1/2" to 2" pipe. It has very sharp dies, in excellent condition. Change pipe threading sizes in literally seconds. Very clean machine. No known problems, all Ridgid components, except for the carriage arm[ordered, not yet arrived] All you'll need is cutting oil. Local pickup is free. We have 3 of these. 2 identical and 1 not a T-2 unit. Please see our other listings for 1224 threaders up to 4" pipe. Ridgid pipe cutters, Greenlee 855 smart quad benders, Ridgid dies, and more.
Ridgid 1224 pipe threader for 1/2" to 4" pipe exc cond 300 535 700
Hi This listing is for a Ridgid 1224 pipe threader in great condition. We re-conditioned it. So it operates as it should. It comes with 2 die heads. 3 sets of dies, so you can thread from 1/2" to 4" pipe. It has very sharp dies, in excellent condition. Change pipe threading sizes in literally seconds. Very clean machine. No known problems, all Ridgid components. All you'll need is cutting oil. Local pickup is free. We have 3 of these. 2 identical and 1 on a steel stand. Please see our other listings for 300 T-2's. 1224 threaders up to 4" pipe, Ridgid pipe cutters, Greenlee 855 smart quad benders, Ridgid dies, and more.
Ridgid 1822-I Pipe Threading Machine with 4" Threading Kit 1822 1224
Ridgid 1822-I Pipe Threading Machine with 4" Threading Kit 1822 1224 Genuine Ridgid 1822-I Pipe Threading Machine With Two 815 A Die Heads and Ridgid 4 Inch Threading Package. This Threading Machine Has a Heavy Duty Auto Lock/ Unlock Front Chuck and 2-Speed Transmission. Perfect for Threading Larger Pipe! Buy With Confidence Fully Tested! Ridgid Lifetime Warranty! Extra 1-Year Warranty! 14-Day Money Back Guarantee! Super Fast Free Shipping! This Ridgid pipe threading package gives you everything you need to thread pipe from 1/8 inch up to 4 inches! This pipe threading package includes the following: Ridgid 1822-I Threading Machine. This pipe threading machine is in almost new condition. It runs very smooth and quiet in both forward and reverse. T his pipe threading machine only has a very few minor scuffs and small scratches on the entire ... moreunit. These scuffs and small scratches will not effect the performance of this pipe threader in any way. This pipe threading machine looks good enough that I don't think the average person would even know it had been used before. The Ridgid 1822-I is completely automatic and is one of the easiest pipe threading machines to use and operate. A new employee without any prior pipe threading experience can safely spin and cut perfect threads every time within just a few minutes of simple instructions and practice. Most of the Home Depot stores thoughout the U.S. use this same threading machine in their plumbing department. This Ridgid 1822-I has a heavy-duty automatic front and automatic rear chuck that automatically grips and/or centers the work piece instantly. The automatic front and rear chucks opens and closes with just a flip of the switch. The Ridgid 1822-I also has a 2-speed transmission. You can choose from 16 or 45 RPM with just a flip of a lever. The Ridgid 1822-I comes with a 1 1/2 horsepower 120 v induction motor. The 1822-I motor has 3 times more horsepower than the Ridgid 300 or 535 which only have 1/2 horsepower) The 1822-I is dependable. Rugged, and yet powe
Ridgid 1224 1/4" to 4" Pipe Threader w/ Rollers
Up for sale today is a Ridgid 1224 Pipe threading machine. There is a little discoloration and grease smears as seen but this baby is in great shape. The clear sticker on the warning label is even still attached. This comes with a black steel bin at the bottom which looks new, 2 die heads, a set of new dies, and 2 Ridgid which have a 2000 lb. capacity. Thank you for your Business! God Bless!
Ridgid 4-S 4S Heavy Duty Pipe Cutter 2" to 4" Threading Threader 141 1224 MINT!
Ridgid 4-S 4S Heavy Duty Pipe Cutter 2" to 4" Cutter was only used on one job and only cut a few pieces of pipe. Like new condition.
Ridgid 15A B294 Foot Pedal Switch w/ Plug Power 300 Threader 535 1822 1224 B 294
For sale by JNM Trading& Consignment is a Ridgid B-294 Foot Pedal. Unit comes exactly as pictured. Here is your chance to own it for a fraction of the retail cost. There are more details on this item below. Feel free to contact us with any questions. Specs: Manufacture: Ridgid Model# B-294 JNM Rating: 3.5 Used in good shape. JNM Trading& Consignment's Rating System 5 = New 4 = Like New 3 = Good to Fair 2 = Has issue(read description) 1 = As-Is Payment Payment is due no later than 5 days after listing end. If payment is not received in specified time a non-paying bidder’s complaint will be filed. If non-paying bidder’s complaint is not resolved we will then leave negative feedback and restrict you from bidding with us in the future. Feedback is reciprocal. Our feedback settings are automated. Once your payment is received feedback ... morewe will left. Please return the favor once you are satisfied with your purchase. If there is issue with an item please contact us before leaving negative feedback. We believe that the customer comes first and we go above and beyond to correct any issue that may occur. We look forward to making you a happy customer and your positive feedback. About Us We are a small family run trading and consignment company. We offer a market analysis on your product and then give you the option to sell or consign your item with us. My wife and I have sold on Ebay and other internet based website's for over 12 years. We have a large international customer base and several retail stores that we buy from and sell to. We like to believe that we can sell anything and there is no job or product to big. Let us sell your product and help you or your company grow. There is a large customer base out there just waiting to be reached and JnM is the company to reach them for you. Let JnM bring the world to you! Shipping We ship items through paypal. Please make sure that your shipping information is up to date! Freight Shipments To qualify for free shipping you must have loading dock and or forklift.
Ridgid 744 Reamer 1/4" - 4" Reamer for 1224 Pipe Threading Machine Used
You are buying a used Ridgid model 744 reamer for the 1224 pipe threader. This tool will come as pictured in excellent used condition. This reamer has a range of 1/4" 4" Shipping will be free to the lower 48 states or $50.00 Worldwide.
RIDGID 535 PIPE THREADER POWER THREADING MACHINE GREENLEE 300 1224 1822
=================================================================== The MAKE OFFER option in THIS sale(little or NO WAIT time- 24 HOURS a DAY) I know that with many eBay auctions/sales. When you use the MAKE OFFER option- you sometimes have to wait 2 DAYS to see if your offer is accepted or rejected and t his keeps you from moving on the other opportunities. NOT SO WITH THIS AUCTION! If you make an offer of a lower price(and you type nothing into"Message to Seller: Add Your Note" area on the MAKE OFFER page) your offer will be accepted or rejected within 10 MINUTES or SOONER that applies 24 HOURS A DAY. So. You can make an offer and know RIGHT AWAY if your offer is accepted or not- BUT. Remember- You can make a MAXIMUM of 3 offers on THIS or any eBay item. Then eBay stops you from making any more offers on that i tem. So MAKE YOUR ... moreOFFER COUNT! If your offer IS ACCEPTED you must make payment with i n 24 HOURS. ============================================================= Y ou're bidding on: RIDGID 535 PIPE THREADER POWER THREADING MACHINE GREENLEE 300 1224 1822- Y ou GET YOUR CHOICE of leg sets- either the straight leg stand OR the wheeled set shown in the LAST PICTURE. This threader was pulled from a working environment due to bankru ptcy. The motor turn s good in BOTH forward and reverse, turned it on and cut a piece of 1 1/2" pipe. No dies included. Y es. ALL these are pictures of the actual unit you'll receive( and remember you get your CHOICE of leg sets) NEED TO ASK A QUESTION? You can contact me by clicking the"Ask a Questions" link. Just down the page- just below the end of the description section SHIPPING: Buyer pays $2 87. 6 0 for shipping and custom crating(this custom 6 sided wood crate is $97.00 included in the $287.60 shipping) to most business addresses within the Continental U.S. 48 st ates. there are a few addresses in FL. Some extre mely off the beaten path area s and a couple of others where this rate does NOT apply. Liftgate Required, R eside n
Ridgid 1224 1/4"-4" Pipe Threader Threading Machine with 4 Die Sets and Heads
Ridgid 1224 1/4"4" Pipe Threader Threading Machine with 4 Die Sets and Heads You are considering a used Ridgid 1224 pipe threader with 4 die heads for NPT in all sizes from 1/4" through 4" It is in excellent shape and ready to get back to work. The large head is fitted with brand new and unused. 2-1/2"4" high speed dies for plastic coated pipe. They will also work for black iron or galvanized pipe if adjusted slightly. I confirmed that with Ridgid tech support. Also included is a set of used dies for stainless that cut ok but die number 3 is chipped. The smaller heads(shown clearly in the last photo) are fitted with 1/4"3/8" 1/2"3/4" and 1" through 2" All are high speed NPT. None of the heads or dies have seen much if any use. The cart that the machine is mounted on is sturdy but ... moreclearly older than the machine. It had been used for other machines but is perfect for this one. There are also some insignificant grind marks on various places on the machine where company engravings were removed. If you are looking for 1 machine to thread them all- this is the one. It has only been cleaned. Nothing was repainted. What you see is what you get. You will not be disappointed. You are welcome to come here to Iowa City. Iowa and pick it up, or I would be happy to palletize it, arrange truck freight and get it on the freight truck for you at your expense. Of course, loading is always free. My best guess for shipping expense would be around $300 for just about anywhere in the lower 48. I will only accept PayPal for a $500 down payment due immediately. If you want to use PayPal or credit cards for the balance. Add their 2-1/2% fee to the total. As always. Your complete happiness is guaranteed. There is no reserve. Thanks Lynn 319.936.3845.
Ridgid 714 Die Head 1224 EXCELLENT SHAPE
Here we have a used Ridgid 714 Die Head. This is for use with the Ridgid 1224. It is in excellent working condition. All die teeth are sharp and have no chips/cracks. Please check out our other listings for more Ridgid pipe threading equipment. Greenlee and Curret benders and Bosch demolition hammers. With questions. Please email or call Alex at 908.400.0894 Posted with
Ridgid Model 4-S Heavy Duty Pipe Cutter 300 700 141 1224 For 2" TO 4" PIPE
NICE SHAPE. NEW CUTTING WHEEL. NO RESERVE YOU CAN BUY IT NOW
Ridgid 1224 power pipe threader 1/2"-4" and below exc cond 3 sets dies 2 heads
Ridgid model 1224 power pipe threader. 1 of 2 remaining units in stock now. Comes with 2 die heads. 3 sets of dies. 1/2"3/4" dies are new, as well as the 2-1/2"4" dies. The 1"2" dies are for Stainless Steel pipe, and they'll also thread carbon steel and black iron pipe. New handle on carriage. New switch, 2 new sets of dies. Has foot switch, Ridgid plastic gangbox on cart. Both front and rear chucks operate freely and tighten properly. Large die head changes sized smoothly. Pipe cutter was cleaned. And both roller wheels spin freely, as does the cutter blade, which is also sharp and free from breaks and chips. Handle spins very nicely. Carriage is smooth operating. Don't know what else to say; just a nice. Clean, properly working 4" Ridgid pipe threader, ready to work and earn you $$. Local pickup ... moreis fine. Bring Benjamins to trade. Shipping is to business with forklift, or to the closest terminal for pickup. Please write for freight quote. Giving city and zip code, please. Will post video ASAP of this exact machine.
Ridgid 161 Pipe Threader Die 4-6" for 300 Compact 535 700 1822 1224 Bucket Oiler
WE COMBINE SHIPPING. S0 CHECK OUT OUR OTHER ITEMS. FREE SHIPPING! THIS IS WITHIN THE 48 STATES(and some parts of Canada) AN ADDITIONAL CHARGE TO OTHER AREAS. YOUR LOOKING A"USED" 161 JAM PROOF RIDGID THREADER IN EXCELLENT CONDITION! THIS UNIT THREADS 4"6" PIPE. IT CAN BE USED MANUALLY WITH A RATCHETING HANDLE(not included) OR CAN BE USED WITH A RIDGID, 300, 535, 700, OR 1822 POWER THREADERS WITH THE PROPER DRIVES(see pic from 1822 instruction manual) THIS UNIT"NEW" LISTS FOR $3267.88 WITHOUT THE OILER! CHECK OUT THIS LINK. CLICK HERE! THE OILER"NEW" which is new! LISTS FOR $247.10 CHECK OUT THIS LINK. CLICK HERE! FOR A COMBINED TOTAL OF $3.514.98! NOT HERE! YOU CAN"BUY-IT-NOW" AND GET FREE SHIPPING AND NO SALES TAX FOR ONLY $1.875.00! THE 161 MANUAL AND BLOW/ PARTS LIST IS ALSO INCLUDED AT ... moreNO CHARGE. PLEASE CHECK OUT OUR OTHER AUCTIONS! THIS IS A VERY NICE UNIT! CHECK OUT THE PIC'S! WITH THE FOLLOWING DESCRIPTION. No. 161 Cat# 36630 No. 161 Geared Threader Features Threads 4" 4-1/2" 5" 6" pipe with one set of dies. Jaw clutch prevents jamming. Simple adjustment for tapered or straight threads. Cam-type workholder sets instantly. Fully enclosed gearing. Right-hand only. Specifications Capacity Nominal Pipe Size: 4" 6" Weight: 158 lbs(42.3 kg) WE ALSO HAVE GREENLEE 555. 854's& 855's AND RIDGID BRAND PIPE THREADERS 300's, 1822's, 1224's, 535's, ETC. SO. PLEASE SEE OUR OTHER AUCTION ITEMS! Powered by The free listing tool. List your items fast and easy and manage your active items. On May-11-13 at 17:36:29 PDT. Seller added the following information:
1224 RIDGID PIPE THREADING MACHINE WITH 2 DIE HEAD ON 200 WHEELED STAND
1224 RIDGID PIPE THREADING MACHINE WITH 2 DIE HEAD ON 200 WHEELED STAND EXCELLENT CONDITION
RIDGID 711 Die Head For Ridgid 1224 pipe threader w/ 1/4"- 3/8" Die
New Page 1 RIDGID 711 Die Head For Ridgid 1224 pipe threader w/ 1/4" 3/8" Die Ridgid 711 die heads for the Ridgid 1224 pipe threader W/1/4" 3/8" Die* Used in Good Working Condition! Payment: I Accept paypal Online Payment Only and We ship to Paypal confirmed address only. Attention Buyer: Your Payment is Expected before 3-days when Auction has ended. If the item remains unpaid after 3 days we will re-listed the item and Ebay will be notified unpaid item. Returns: Item may be returned from the date the item is receivrd 14 days for Refund of item price and Seller does not pay return shipping costs. Bidding: You are Bidding on what is in the pictures. Purchase you will Recieve what is shown in the pictures. nothing less nothing more Please Note: We do not allow shipping to P.O. boxes. Buyer pays for all shipping costs. Including ... moreHandling and Insurance cost. The purchase in TEXAS must include 8.25% Sales Tax and we use shipping service only. We carefully test and inspect all auctioned items before the shipment* Thanks for looking! Happy to bidding!
NICE!! RIDGID 1224 POWER PIPE THREADING MACHINE OILER HAND CART AND GEAR 141
W elcome to 0728darcel Description SELLING A USED RIDGID 1224 PIPE THREADER COMES WITH OILER WHEEL KIT CARRIAGE AND Ridgid 141 gear threader, UNIT IS USED SHOWS SIGNS OF NORMAL WEAR AND TEAR.READY TO WORK LOOKS AND OPERATES GOOD.PLEASE ASK ALL QUESTIONS PRIOR TO BIDDING.I AM LISTING THIS ITEM WITH NO RESERVE MAKE SURE YOU ARE READY TO BUY AND PAY FOR THE ITEM YOU ARE BIDDING ON THANK YOU Shipping ALL ITEMS SHIP WITHIN 1-2 DAYS AFTER RECEIVING PAYMENT VIA FREIGHT INSURED AND WELL PACKED. THIS CMPACTOR WILL BE SHIPPED VIA FREIGHT DUE TO SIZE AND WEIGHT TO A BUSINESS ADDRESS ONLY RESIDENTIAL ADDRESSES ADD 95.00 TO 245.00 QUOTE Our promise we promise to deliver what we advertise. Our pictures will be detailed and of actual unit being sold/auctioned all items are shipped within 1-3 days of payment receipt items 50lbs or less will ship the next ... morebusiness day or the same business day depending on time item is payed for fed ex picks up daily at 3pm once item is received please inspect the item and make sure it is as advertised if for some reason it is not please contact us immediately we will do our best to resolve all issues.if item is as advertised and you are happy with this transaction please take the time to leave us your feedback.it is of great importance to us! thanks and have a blessed day!
Ridgid 466 Hinged Pipe Cutter 4" to 6" Heavy Wall Cast Iron Steel 83085 300 1224
Ridgid 466 Hinged Pipe Cutter 4" to 6" Heavy Wall Cast Iron Steel 83085 300 1224 Genuine Ridgid Model 466 Heavy Duty 4-Wheel Hinged Pipe Cutter This is a Very Serious Pipe Cutter! Cuts Pipe 4" to 6" Buy with Confidence Fully Tested! 14 Day Money Back Guarantee! 1 Year Extra Warranty! Super Fast Free Shipping! Ridgid Hinged Heavy Duty 4-Wheel Pipe Cutter Model 466. Cuts pipe from 4" to 6" Designed for rapid cutting and for cutting pipe in work areas where a complete turn is impossible. No chips or dings on any of the 4 cutting wheels. This pipe cutter screw handle turns as smooth as a well-made Swiss watch. No slop. Play, or binding when opening or closing this pipe cutter. Genuine Ridgid handle is also included that screws into the bottom of the frame. This second handle makes 2-man leverage possible. This pipe ... morecutter looks like it has only been used a few times. This pipe cutter has also been kept dry. Clean and well oiled. There is no rust anywhere on this pipe cutter! This pipe cutter is also clean enough on the inside and outside that you could eat your lunch off of it! Take a look at the photos and see if you agree! Ridgid part number 83085. Yep! There are cheaper pipe cutters made in China listed on eBay. But do not settle for cheap junk! I do not think you will find a nicer used Ridgid pipe cutter anywhere. If you are looking for a quality Ridgid pipe cutter in top condition. With a 14 day money back guarantee and a extra 1 year warranty from an experienced and reputable eBay seller, this is the pipe cutter for you! Ridgid’s retail list price for this pipe cutter is $879.85. Plus sales tax in most states. Here is your chance to make your life easier! You can now purchase this item at a fraction of the retail price and save a lot of money! Buy It Now For Only $529.99 and Save Over $349.00 Includes Free Shipping and Insurance. Any Questions? Call Rick at(801) 759-5483 anytime Please Review My Feedback Click on the underlined and buy with confidence. I only offer good quality new
Ridgid 1224 die set 2-1/2 - 4 NPT HS *gr8cond* sharp, no chips* free shipping NR
SHARP. NO CHIPS* GREAT CONDITION* FREE SHIPPING* THIS IS A SET OF RIDGID PIPE THREADER DIES FOR THE RIDGID 714 DIE HEAD FOR THE RIDGID 1224 PIPE THREADER MACHINE. FREE SHIPPING TO LOWER 48 STATES. NO INTERNATIONAL SHIPPING. SEE MY OTHER AUCTIONS FOR OTHER HIGH QUALITY TOOLS* QUESTIONS? 760-419-6809* CALIFORNIA TIME*
Ridgid 1224 Pipe Threader 1/8" to 4" Threading Machine W/T Rolling Storage Cart
Hello and welcome to this auction. We have been in business 12 years in the heavy equipment sales and maintenance a lack of local sales and internet, we will apply all of our experience and knowledge in describing item we sell, we will describe items as we see them and will post pictures of any flaw or damage we look forward to your business and our very first feedback and hopefully many to come, customers are our number one priority. We strive for customer satisfaction. Your feedback and 5 star ratings are essential to our growth and success on this tough auction site, customer satisfaction is our number one priority. Now for the auction THIS RIDGID 1224 THREADING MACHINE 1/8 TO 4' W/T ROLLING STORAGE CART AND 1 SET OF DIE. IS IN VERY GOOD WORKING CONDITIONS EVERYTHING WORKS FINE AS WELL AS THE PEDAL,THIS TREADING MACHINE WAS USED IN ... moreA HAND FULL OF JOB,GREAT PERFORMER RUN EXCELLENT,NICE ADDITION FOR ANY BUSINESS. Features Threads 1/4"2" pipe at 36 RPM and 2 1/2"4" at 12 RPM. The 1224 threads a wide range of pipe including black. Galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C. An induction motor insures sound levels well within the limits set by the regulating authorities. A special capacitor-start/ capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced. 1/4"2" Universal Die Head; 2 1/2"4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpiece with through-head oiling. Approved by CSA(115V only) Specifications Pipe Capacity: 1/4"4" 6mm-100mm) 4"6" 100mm-150mm) with 161 Geared Threader. Bolt Capacity: 1/4"2" 6mm-50mm) Motor: 1 1/2 HP. Single-phase, 60 Hz or 50 Hz, induction type. Motor Control: Reverse/Off/Forward. Heavy-duty rotary-type and integral foot switch. Spindle Speed: 36/12 RPM. Gear Box: Two-speed gear box 3:1 ratio
FOOT SWITCH FOR RIDGID THREADING MACHINE 300,535,OR 1224 WITH RIDGID CORD
Up for sale one used foot switch for Ridgid threading machine 300. 535, or 1224. It comes with Ridgid cord and terminals. It has been tested and works as it should be. Sold as is. Shipping to 48 States.
*RIDGID* 1224 PIPE THREADER, SET,KIT,LOT,*2 SELF OPENING DIE HEADS!* ,CART,PEDAL
THIS IS A R EALLY NICE Ridgid 1224 SELF OILING Pipe/Bolt threading Set! VERY LOW HOURS ON THIS 1224 AND IT SHOWS! EXCELLENT MACHINE! Auto oiler built in! This will thread up to 2" Bolts or 6" Pipe with the right dies! COMES WITH RIDGID 714 AND RIDGID 711 DIE HEADS WITH EXCELLENT TEETH! Over $14.000 NEW for all of this! SAVE $$$ Works Great! Excellent shape. As you can see! INCLUDES: Ridgid 1224 Auto oiling Pipe Threader/ with foot control! Ridgid Rolling Cart/Cabinet/Stand· Ridgid Carriage· Ridgid 714 Self Opening Die Head(Includes Good Dies) Ridgid 711 Self Opening Die Head(Include s Good Dies) Ridgid Model 744 Reamer· Ridgid Model 764 Cutoff Tool· Ridgid Die Teeth! 2 Tri Stands. 4-6" Pipe Cutter. Wheeler Soil Chain Pipe Wrench. Ridgid 2s Reamer. Ridgid 48" Pipe wrench. Ridgid 36" Pipe Wrench. ... moreRidgid 24" Pipe Wrench ALL OF THIS ABOVE INCLUDED! GREAT DEAL! Ridgid 1224 Features: Threads 1/4"2" pipe at 36 RPM and 2 1/2"4" at 12 RPM. The 1224 threads a wide range of pipe including black. Galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C. An induction motor insures sound levels well within the limits set by the regulating authorities. A special capacitor-start/ capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced. 1/4"2" Universal Die Head; 2 1/2"4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpiece with through-head oiling. Approved by CSA(115V only) Specifications: Pipe Capacity: 1/4"4" 6mm-100mm) 4"6" 100mm-150mm) with 161 Geared Threader. Bolt Capacity: 1/4"2" 6mm-50mm) Motor: 1 1/2 HP. Single-phase, 60 Hz or 50 Hz, induction type. Motor Control: Reverse/Off/Forward. Heavy-duty rotary-type and integral foot switch. Spindle Speed: 36/12 RPM. Gear Box: Two-speed gear box 3:1 rati
Ridgid Pipe Drive Shaft Tool 70" Works w/ 535 300 1224 for 141 161 Threader
Up for bid is a good working Ridgid pipe drive shaft tool 72" Please checkout my other items Check out my! On Sep-26-13 at 17:02:32 PDT. Seller added the following information: RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1416285da99-0x107-
Ridgid No. 4-S Pipe Cutter 2"- 4" Capacity 3 Wheel Cutter 141 161 300 1224 700
RIDGID# 4-S HEAVY DUTY PIPE CUTTER 2"4" CAPACITY. This is a 3 wheel cutter THE PIPE CUTTER IS FULLY FUNCTIONAL AND IN GOOD USED CONDITION. The Cutting wheel is chipped and will need to be replaced. Free Shipping USA ONLY 48 States On Aug-14-13 at 01:58:50 PDT. Seller added the following information:
Ridgid 1224 pipe threader threading machine + 2 die heads + extras
This auction is for a complete 120v Ridgid 1224 threading machine. It includes both the 711 and the 714 die heads. One 1/2" 3/4" die set, one 1" 2" die set, and two 2 1/2" 4" die sets. I am also including the black Ridgid case and the three hex keys. Basically what you see in the pictures is what you get. All items are in perfect working condition and look great as well. Shipping will be to the U.S. only and will be done via freight to a business with unloading capability. IF LIFT GATE SERVICES AND OR RESIDENTIAL DELIVERY IS REQUIRED THERE WILL BE AN ADDITIONAL COST. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14186ec577f-0x101-
RIDGID 1224 Pipe Threading Machine - With Stand - Works Great - 240V
Ridgid 1224 pipe threader. 240v(single phase) Currently setup to run off a generator. This is a great working tool. And is ready to be put into service. Has reamer. Pipe cutter, stand and foot pedal. No dies are included, order the ones you need, don't pay extra for the ones you don't. The Ridgid decals on the side were taken off by the previous owner. Stand is a little dirty. One of the plastic oil pans had a crack in it which was fixed with JB weld(no way affects operation) This item ships freight. The quoted price is to a freight terminal or business address with a loading dock or forklift(in the lower 48) If you need a liftgate we can have one arranged for an additional fee. Thanks for bidding!
Ridgid 1224 Pipe Threader ROLLING CART 1/8-4" 2 Die Heads! No Reserve
Ridgid 1224 Pipe Threader ROLLING CART 1/8-4" 2 Die Heads! No Reserve Used In Good Working Condition- All Good Sharp Teeth. The fiberglass oil pan had a crack that was repaired with fiberglass. Just serviced by an Authorized Ridgid Repair Center. Includes 2 Die heads for up to 4" Pipes Please look at the pictures for a better view of its cosmetic condition- Any Questions- Let me know. Ready to Ship Shipping quote is Within the Continental USA Only to a Business With a Dock or Forklift. Or It can Also Be picked up from a Freigh Terminal closest to you were it can be loaded to your Pick Truck. Residential Delivery Is Extra. If been shipped to a residential address Please request a quote First. No Shipping to a PO Box. APO, AK, HI, PR Or international. No Reserve Auction.Last Lucky Bidder takes it Home.
Nice Ridgid 1224 threader with 3 die heads foot pedal and cart
Nice Ridgid 1224 threader with 3 die heads. This machine runs great! The pictures are the machine you will get. Email me if you have any questions.
RIDGID 300 PIPE THREADER RIDGID GREENLEE 535 1224 1822 + OILER
RIDGID 300 PIPE THREADER RIDGID GREENLEE 535 1224 1822 + OILER great working conditions with sign of usage. For cosmetic conditions please refer to pictures PLEASE PAY CLOSE ATTENTION TO THE PICTURES. IF IS PICTURED IS FOR YOU TO TAKE IN CONSIDERATION AT THE TIME OF BIDDING USED BUT NOT ABUSED THIS IS A VERY GREAT ITEM IN VERY GOOD CONDITIONS. PLEASE SEE PICTURES BEFORE BIDDING. VERY GOOD CONDITIONS. DON'T MISS OUT! PAYPAL PAYMENTS MUST HAVE"CONFIRMED" ADDRESSES! PAYMENT IS DUE WITHIN 3 DAYS OF OF END OF AUCTION OR WE WILL RELIST THE AUCTION AND LEAVE A NON-PAYMENT STRIKE! ALL CALIFORNIA WINNING BIDDERS ADD 8.75% TAX TO WINNING FINAL PRICE! THESE ARE USED ITEMS. SO PLEASE LOOK AT PICTURES AND READ THE DESCRIPTION CAREFULLY. PARTS ARE DESCRIBED TO THE BEST OF MY ABILITY. I AM HUMAN- IF AN ERROR IS MADE PLEASE CONTACT ME AS SOON ... moreAS POSSIBLE SO I CAN CORRECT THE ERROR. PLEASE EMAIL ME FOR ANY QUESTIONS INTERNATIONAL BIDDERS ARE WELCOME PLEASE EMAIL ME BEFORE BIDDING FOR SHIPPING COST International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. RETURNS ACEPTED 25% RESTOCKING FEE APPLIES TO ALL RETURNED ITEMS AND YOU WILL BE RESPONSIBLE FOR ALL SHIPPING COST GOOD LUCK AND HAPPY BIDDING
ROTHENBERGER SUPERTRONIC 4SE AT PIPE THREADER -1/2" - 4" - RIDGID 1224
Rothenberger Supertronic 4SE AT Pipe Threader- Exactly like the Ridgid 1224- Threads 1/2" 4" Pipe- Comes as pictured with two die heads. Foot pedal and legs- This unit was purchased new and used on one job only- As you can see from the pictures this unit is in EXCELLENT condition- Call with any questions 732-794-8962- For shipping quote please forward zipcode for commericial address with forklift or loading dock as item weighs about 450lbs.
Wheeler Rex 6790 1/2"-4" Ridgid Rigid 300 700 141 161 1224 **NO RESERVE!!**
Here we have a Wheeler Rex 6790 pipe threader. With questions. Call Alex at 908-400-0894 This unit will thread up to 4" Included in the lot are 2 die heads so that you will be able to thread 1"4" It's in perfect working condition. The oiler works great. This unit is comparable to the Ridgid 1224. This unit will go to the highest bidder. Please check out our other listings for more Ridgid and Greenlee equipment. Posted with
Ridgid 840A Drive 300 535 1822 1224
Here we have a Ridgid 840A drive shaft With questions. Call Alex at 908-400-0894 Please check out our other listings for more Ridgid and Greenlee equipment. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-14326deb4b6-0x100-
Victaulic VE-226 Roll Groover 2" - 6" VE226C Ridgid Rigid 300 535 1224 915 975
Here we have a Victaulic groover in good working condition. With questions. Please call Alex at 908-400-0894 Please check out our other listings for Ridgid and Greenlee equipment. Posted with
RIDGID 1224 PIPE THREADER THREADING MACHINE UP TO 4" W/2 DIEHEADS READY TO WORKI
RIDGID 1224 PIPE THREADER THREADING MACHINE UP TO 4" W/2 DIEHEADS READY TO WORKI Up for sale is a used but in great working condition Ridgid 1224 Pipe Threading Machine. These are pictures of the actual item up for sale. It has been tested and is fully functional. Comes with 2 dieheads. Foot switch and a gallon of cutting oil. This machine is not very old it was manufactured in 2007. I will only ship to the contiental US. Free shipping to anywhere in the lower 48 states to a FedEx freight terminal only. NO shipping to home or business address just shipping to the closest FedEx freight terminal to you according to zip code. Please review me feedback and bi d with confidence I will only ship to a confirmed address. I accept Paypal for safe and secure payment. Please feel free to email me with any questions or concerns. Thank you very much ... morefor looking please click below to view my other qaulity tools. A confirmed address is your credit card billing address.NO local pickup available. There is a 3 day inspection period if not satisfied return for a full refund. We do not pay for repairs or parts we just offer a full refund. Thank you Please Read Carefully We do not pay for parts of repairs. If you have a problem with an item please contact us. You have a 3 day inspection period if not happy simply send back for a full refund
Ridgid Pipe Cutter 2"-4" 300 700 1224 535
Here we have a Ridgid pipe cutter 2"4" With questions. Please call Alex at 908-400-0894 Please check out our other listings for more Greenlee and Ridgid equipment Posted with
Ridgid 765 Blade Cutter for Ridgid 1224 Pipe Threader
RIdgid 765 Blade Cutter This is a ridgid blade cutter for your threader. As you can see this unit is in great shape and ready to use. Thanks you for your Business! Shipping will be 18.00! God Bless!
RIDGID 711 DIE HEAD 1/2 - 2"--AUTO OPENING -- FITS 1224 THREADER
THE TOOL STORE 490 JERICHO TPKE. MINEOLA NY-USA(516)747-0651 RIDGID 711 DIE HEAD 1/2- 2"AUTO OPENING- FITS 1224 THREADER Please check out our other auctions. ABOUT US WE ARE ONE OF THE LARGEST USED/RECONDITIONED POWER TOOL COMPANIES IN THE USA IN BUSINESS OVER 30 YEARS SPECIALIZING IN GREENLEE ELECTRICAL/ RIDGID PLUMBING CONTRACTING INDUSTRY. ALL TOOLS ARE IN EXCELLENT WORKING CONDITION UNLESS OTHERWISE STATED IN AD. ANY QUESTIONS ON ANY AD CALL US AT OUR OUR OFFICE AT(516)747-0651 WE ARE IN OUR OFFICE; NY MONDAY-FRIDAY DURING 7AM-5PM AND SATURDAY DURING 7AM-10AM. NY/NJ STATE RESIDENTS MUST PAY 8.8% TAX) We are a store that sells industrial power tools to contractors and major power tool distributors. VIEW OUR OTHER AUCTIONS Powered by The free listing tool. List your items fast and easy and manage your active items.
Ridgid 300 T2 Pipe Threader *FULLY SERVICED* Rigid 700 141 1224 #01
We are a power tool repair company selling tools that have been fully serviced. With questions call Alex at 908-400-0894. We have over 20 machines and will combine shipping when we can. Please call for exact shipping price Here we have a fully serviced Ridgid 300 with carriage(reamer. Cutter& die head) You will receive exactly what's pictured: nothing more-nothing less. Please check out our other listings for more Ridgid and Greenlee equipment. Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1437b74604c-0x102-