|
HP Agilent 11970K Waveguide Harmonic Mixer 18-26.5 GHz
HP/ Agilent 11970K Waveguide Harmonic Mixer Unit has been lab tested good Manufacturer: Agilent/ HP Model: 11970K Key Features& Specifications Flat frequency response, Low conversion loss, No bias or tuning adjustments, 100 mW safe input level, The Agilent 11970K waveguide mixer is a general-purpose harmonic mixer employing a dual-diode design to achieve flat frequency response and low conversion loss. These are achieved without external dc bias or tuning stubs. Manual operation and computer-controlled hardware operation are simplified because mixer bias and tuning adjustment are not required. The 11970K extends the frequency range of the Agilent spectrum analyzers to the K-Band(18 to 26.5 GHz) The compatible Agilent spectrum analyzers include: the E4440A/E4446A/E4448A PSA(with Option AYZ) The E4407B ESA-E(with Option AYZ) the 856xEC, ... morethe 8566B(with a preamplifier) and the 7000 modular analyzer(with the 70907A/B external mixer interface module) The 11970K is not compatible with the N9030A PXA signal analyzer. Accessories: None Terms and conditions: Buyer is responsible for all applicable CA sales tax. Shipping(includes returns) and handling costs. Paypal is the preferred method of payment. Other forms of payment may require additional time to clear or additional fees(for wire transfers. Shipping: Shipment by UPS. FedEx, or USPS ground. Extra shipping charges for expedited services. International shipment cost is an estimate. Please contact us for actual international shipping cost. Insurance cost will be added to all shipments. Return Policy: 30 Day return period(from date of receipt) applies if product does not power on(if applicable or unless otherwise stated in listing) or if product is not as described in eBay listing. Returned unit must be received by Spectra Test Equipment in the same condition as that was received by the buyer(including intact waranty stickers. If shown in listing. Customer is responsible for return shipping + insurance fees and proper packaging of unit. | | About us |
|
|
|
Hewlett Packard HP Agilent 70907A EXT Mixer Interface Module 70001A System
Hewlett Packard 70907A. EXT Mixer Interface Module, used in systems based on 70001A Mainframe Condition: Excellent. Has some minor marks on exterior Does not include any options. Probes, cables, connectors, sensors, or accessories. Tested& guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-1405274c6d5-0x107-
|
|
|
HP/Agilent 5086-7930 SBTX BaFe Filter Mixer (6X) 40GHz
Payment | Shipping | Packing | Warranty&Returns | Contact Inf Select a picture Larger Picture HP/Agilent 5086-7930 SBTX BaFe Filter Mixer(6X) 40GHz Description Condition: Used. Fully Tested. U sed in the following instrument: 8564EC 8564E Warranty 3 0 DAY WARRANTY Business Hours Shipping Rate Monday to Friday from 8:30 am to 5:30 pm(GMT+8) Terms&Condtitons Payment Payment must be received within 7 days of close of auction. The Buyer has to pay for the amount of the item. Freights, packing and handling fees. We do NOT accept cash payments. We accept the following methods of payment: Paypal Payment Wire Transfer Shipping All values are in USD and customs duties& taxes and other surcharges are not included in rates. If shipping charges are not stated. We will contact you within 24 hours with the Grand Total of your winning item(s) ... morePlease remember to input your shipping address when auction ends. Will Ship worldwide. Will ship out within 24 hours days upon payment received. Freights has to be on Buyer except for the items already including the freights. We are not gonna accept Local Pickups. Shipped by DHL ONLY. Packing Click to view larger photos! Packing fee has to be on Buyer except for the items which already included. Packing Fees at $5.00 for the size below 24K cm*cm*cm. While at $10.00 for the size over 24K cm*cm*cm. EPE as the shockproof material for the packing. Warranty&Returns THIS RETURN POLICY ONLY FOR THE ITEM WHICH MARKED CAN BE RETURNED IN THE DESCRIPTIONS. return policy for the item can't power on. Can't pass self-test or not as described as what the item listing is. during the warranty date. The buyer can return the item or ask for exchanging the item if something's wrong with the item or buyer is unsatisfied with the item, we are not promise that we will exchange for all items, it depends on if we have the goods in stock) the back freight is on buyer, re-shipped frieight is on seller. the return item has to be the original packing and the item with the cover sheet. Retur
|
|
|
HP/Agilent 5086-7338 MIXER, 22 GHz
Payment | Shipping Payment | Shipping | Packing | Warranty&Returns | Contact Inf Select a picture Larger Picture HP/Agilent 5086-7338 MIXER. 22 GHz Description Condition: Used. Fully Tested, U sed in the following instrument: 8565A 8569A 8569B Warranty 3 0 DAY WARRANTY Business Hours Shipping Rate Monday to Friday from 8:30 am to 5:30 pm(GMT+8) Terms&Condtitons Payment Payment must be received within 7 days of close of auction. The Buyer has to pay for the amount of the item. Freights, packing and handling fees. We do NOT accept cash payments. We accept the following methods of payment: Paypal Payment Wire Transfer Shipping All values are in USD and customs duties& taxes and other surcharges are not included in rates. If shipping charges are not stated. We will contact you within 24 hours with the Grand Total of your winning item(s) ... morePlease remember to input your shipping address when auction ends. Will Ship worldwide. Will ship out within 24 hours days upon payment received. Freights has to be on Buyer except for the items already including the freights. We are not gonna accept Local Pickups. Shipped by DHL ONLY. Packing Click to view larger photos! Packing fee has to be on Buyer except for the items which already included. Packing Fees at $5.00 for the size below 24K cm*cm*cm. While at $10.00 for the size over 24K cm*cm*cm. EPE as the shockproof material for the packing. Warranty&Returns THIS RETURN POLICY ONLY FOR THE ITEM WHICH MARKED CAN BE RETURNED IN THE DESCRIPTIONS. return policy for the item can't power on. Can't pass self-test or not as described as what the item listing is. during the warranty date. The buyer can return the item or ask for exchanging the item if something's wrong with the item or buyer is unsatisfied with the item, we are not promise that we will exchange for all items, it depends on if we have the goods in stock) the back freight is on buyer, re-shipped frieight is on seller. the return item has to be the original packing and the item with the cover sheet.
|
|
|
HP 08662-60139 FM SL MIXER A3A9 A-1937-4 MODULE BOARD
HP 08662-60139 FM SL MIXER A3A9 A-1937-4 MODULE BOARD Condition: Used condition. 14 Day Right of Return if Not Fully Satisfied. Package Specifcs: Packaged Weight: 2 lb. Packaging Charge: $0.00, Shipping Service: UPS Ground, Shipping: Shipping Information: Before purchasing the item. Please remember the following: This item is not available for International Bidding or Shipping. We normally ship within 2-3 business days. USPS will ship to PO Boxes and street address. UPS will only ship to street address. Please use the shipping calculator on this page for shipping charges to your zip code. You will be responsible for paying these shipping charges in addition to the sale price should you win. Handling charges are included in the shipping calculator. Delivery to a United States address should be expected in 7-10 days after funds have been received ... moreand cleared through our Pay Pal account(Pay Pal payment) We ship after we have verification of funds. Normally. UPS Ground delivery is 4 days after it is placed in their system, but, unfortunately, we cannot gurrantee the rate of speed of UPS. Please understand, we cannot be held responsible for delivery delays or damages caused by UPS. All items are shipped insured in the amount of the item's final sale price. Once your item is shipped. You will receive an automated email from our UPS Store or Pay Pal which will allow you to track the shipments' progress to you. Please make sure your spam filters allow the email to pass to your account. Click the logo below to track your shipment. Export Control/ITAR Liability Please read carefully. By purchasing this item. You are doing so knowing and agreeing to the following conditions and agree to hold harmless Test Gear Nation Incorporated and all its agents should you improperly export this item. This item may be designated an Export Control Item. The use. Disposition, export and re-export of this item is subject to all applicable United States Laws and Regulations. This includes the Export Administration Control Act of
|
|
|
HP 08662-60105 A-1905-4 RF MIXER A6A6 RF MIXER RS LOOP MODULE BOARD
HP 08662-60105 A-1905-4 RF MIXER A6A6 RF MIXER RS LOOP MODULE BOARD Condition: Used condition. 14 Day Right of Return if Not Fully Satisfied. Package Specifcs: Packaged Weight: 2 lb. Packaging Charge: $0.00, Shipping Service: UPS Ground, Shipping: Shipping Information: Before purchasing the item. Please remember the following: This item is not available for International Bidding or Shipping. We normally ship within 2-3 business days. USPS will ship to PO Boxes and street address. UPS will only ship to street address. Please use the shipping calculator on this page for shipping charges to your zip code. You will be responsible for paying these shipping charges in addition to the sale price should you win. Handling charges are included in the shipping calculator. Delivery to a United States address should be expected in 7-10 days after funds ... morehave been received and cleared through our Pay Pal account(Pay Pal payment) We ship after we have verification of funds. Normally. UPS Ground delivery is 4 days after it is placed in their system, but, unfortunately, we cannot gurrantee the rate of speed of UPS. Please understand, we cannot be held responsible for delivery delays or damages caused by UPS. All items are shipped insured in the amount of the item's final sale price. Once your item is shipped. You will receive an automated email from our UPS Store or Pay Pal which will allow you to track the shipments' progress to you. Please make sure your spam filters allow the email to pass to your account. Click the logo below to track your shipment. Export Control/ITAR Liability Please read carefully. By purchasing this item. You are doing so knowing and agreeing to the following conditions and agree to hold harmless Test Gear Nation Incorporated and all its agents should you improperly export this item. This item may be designated an Export Control Item. The use. Disposition, export and re-export of this item is subject to all applicable United States Laws and Regulations. This includes the Export Administration C
|
|
|
HP 08662-60107 A-1905-4 RF MIXER A6A8 OS LOOP MODULE BOARD0
HP 08662-60107 A-1905-4 RF MIXER A6A8 OS LOOP MODULE BOARD0 Condition: Used condition. 14 Day Right of Return if Not Fully Satisfied. Package Specifcs: Packaged Weight: 2 lb. Packaging Charge: $0.00, Shipping Service: UPS Ground, Shipping: Shipping Information: Before purchasing the item. Please remember the following: This item is not available for International Bidding or Shipping. We normally ship within 2-3 business days. USPS will ship to PO Boxes and street address. UPS will only ship to street address. Please use the shipping calculator on this page for shipping charges to your zip code. You will be responsible for paying these shipping charges in addition to the sale price should you win. Handling charges are included in the shipping calculator. Delivery to a United States address should be expected in 7-10 days after funds have been ... morereceived and cleared through our Pay Pal account(Pay Pal payment) We ship after we have verification of funds. Normally. UPS Ground delivery is 4 days after it is placed in their system, but, unfortunately, we cannot gurrantee the rate of speed of UPS. Please understand, we cannot be held responsible for delivery delays or damages caused by UPS. All items are shipped insured in the amount of the item's final sale price. Once your item is shipped. You will receive an automated email from our UPS Store or Pay Pal which will allow you to track the shipments' progress to you. Please make sure your spam filters allow the email to pass to your account. Click the logo below to track your shipment. Export Control/ITAR Liability Please read carefully. By purchasing this item. You are doing so knowing and agreeing to the following conditions and agree to hold harmless Test Gear Nation Incorporated and all its agents should you improperly export this item. This item may be designated an Export Control Item. The use. Disposition, export and re-export of this item is subject to all applicable United States Laws and Regulations. This includes the Export Administration Control A
|
|
|
HP 10514A/86601-60138 H58 Dbl Bal Mixer 0.2-500 MHz
HP 10514A H58 Double Balanced Mixer 0.2-500 MHz 5mW/+7dBm Working HP 86601-60138 HP 10514A Mixer Specs: Frequency Range: 0.2 to 500 MHz Maximum Input Level: 40 mA Maximum Input Power: 5 mW or +7 dBm Connectors: SMB Payment: Paypal accepted. We DO NOT accept Personal Checks. Note: due to eBay's new policy. Sellers can no longer ask for Cashier's Checks/Money Orders via listings or emails. Contact should be made within 3 days and payment must be received within 10 days of winning. Payment must clear before shipping. Unpaid auction wins will be forfeited after 10 days and a Non-Payer report will be filed with eBay to recover the closing fees of the auction. Shipping On This Auction: This is a'Small' item. Small' items use the following terms: USA shipping is $5.25 for USPS Priority Mail. Shipping for each additional'Small' ... moreitem is $1.50. Shipping worldwide using USPS. See calculator for available options. The rate for each additional'Small' item is $2.50. We'll ship your order within 2 business days after confirmation of your order and verification of your payment information. Shipping address must match"bill to" address. Return Policy: This item may be returned within 7 days from the date you receive your order for refund of auction sale price. Shipping& Handling fees are non-refundable. Feedback Policy: When the customer is satisfied with a purchase and leaves positive feedback then we are more than happy to leave feedback in kind. We do not leave positive feedback until the customer lets us know everything is ok by leaving us positive feedback.
|
|
|
HP 10514A Dbl Balanced Mixer 0.2-500MHz 5mW/+7dBm S529-
HP 10514A Double Balanced Mixer 0.2-500 MHz 5mW/+7dBm Working HP 10514A Mixer Specs: Frequency Range: 0.2 to 500 MHz Maximum Input Level: 40 mA Maximum Input Power: 5 mW or +7 dBm Connectors: SMB Payment: Paypal accepted. We DO NOT accept Personal Checks. Note: due to eBay's new policy. Sellers can no longer ask for Cashier's Checks/Money Orders via listings or emails. Contact should be made within 3 days and payment must be received within 10 days of winning. Payment must clear before shipping. Unpaid auction wins will be forfeited after 10 days and a Non-Payer report will be filed with eBay to recover the closing fees of the auction. Cheaper Shipping Now Available For Small Items! Read Below For Details! Shipping On This Auction: This is a'Small' item. Small' items use the following terms: USA shipping is $5.25 for USPS ... morePriority Mail. Shipping for each additional'Small' item is $1.50. Shipping worldwide using USPS. See calculator for available options. The rate for each additional'Small' item is $2.50. We'll ship your order within 2 business days after confirmation of your order and verification of your payment information. Shipping address must match"bill to" address. Return Policy: This item may be returned within 7 days from the date you receive your order for refund of auction sale price. Shipping& Handling fees are non-refundable. Feedback Policy: When the customer is satisfied with a purchase and leaves positive feedback then we are more than happy to leave feedback in kind. We do not leave positive feedback until the customer lets us know everything is ok by leaving us positive feedback. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1405fe6d3d9-0x100-
|
|
|
Gilson Mixers Portable 3 Cu.Ft. Concrete Mixer Electric 1/2 HP Motor
SKU: SDOT640157 A: 0015000000GcAPi O: 0065000000NLpT1 PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Gilson Mixers 3 Cubic Foot Concrete Mixer in good operating condition. This unit is being dispersed as part of a standard fleet rotation from the City of Seattle. It has been regularly serviced and maintained throughout its life. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. We have two great eBay stores to better serve you. View our for construction machinery. Fleet vehicles and heavy equipment. View our for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Gilson Mixers Serial Number: Unknown Transport Weight: approx. 190 lbs Transport ... moreDimensions: 48"L x 42"W x 46"H Features/ Specifications: 3 cu. ft. drum Capable of mixing 1.5- 80# bags of concrete High torque 1/2 HP electric motor with ON/OFF switch Lightweight/portable Strong polyurethane drum will not crack or rust and easy to clean Ring gear is enclosed for safe operation Handles adjust for easy storage Condition: Unit is in good operating condition Unit is in good overall cosmetic condition See photos for more details Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this listing. Weights. Dimensions, features, specifications and resource links are provided for informational purposes only, are approximate, and may vary from year to year, model to model and machine to machine. Payment. Shipping and Fees: This item will be shipped on a pallet. There is a minimum charge of $75 for palletizing
|
|
|
HP/Agilent 11971A Harmonic Mixer 26.5-40GHz w/ CMT RS28-2.00 Inch Rigid Straight
Search our eBay Store! HP/Agilent 11971A Harmonic Mixer 26.5-40GHz w/ CMT RS28-2.00 Inch Rigid Straight SKU: JV-HAN-B-HP11971AHARM Condition: Used Packaging: OEM Warranty: 30-Day DOA Warranty This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge HP/Agilent 11971A Harmonic Mixer 26.5-40GHz w/ CMT RS28-2.00 Inch Rigid Straight. Model: 11971A. Type: Harmonic Mixer. Range: 26.5-40GHz. Includes one CMT rigid straight. Physical Condition: Good- Minor scuffs/scratches. Functionality/Degree of Testing: We do not have the necessary resources to test this unit. Power cable is not included. Dimensions(L" x W" x H" 4-7/8 x 2 x 1-1/2. THE FDA DISCLAIMER BELOW ... moreIS ONLY FOR MEDICAL DEVICES. SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item. This unit has been used. It has been cleaned in accordance with the manufacturers guidelines by the medical facility from which we received it. All parts. Accessories, cables, etc. are not included unless pictured or listed in the description. If you require more information and specifications. Please contact the manufacturer and/or research online. As a liquidation house, we're unable to test every product and have limited technical knowledge. What you see in the description is all that is provided to us. Buying in Bulk Quantity If you wish to purchase in bulk(10+) Please contact us for a combined shipping rate. If we don't have enough units listed, we may be able to acquire more. Please call us for the latest inventory updates. If you're
|
|
|
LIGHTNIN 1/3 hp DIRECT DRIVE COMMERCIAL MIXER AGITATOR EV1P33M VARIABLE SPEED
Hi de ho friends and foes. Offered is pre-used Lightnin brand 1/3 horse power. Direct drive, variable speed, commercial mixer/agitator in good useable condition. These list at nearly 2000.00 new. The mounting vise is missing the"T" part of the handle but I am having a new"T" handle welded on later today or in the morning so when you receive it. It will be ready to install. The mixer is roughly 24" tall including the mounting bracket and weighs 35 lbs before packaging. I am charging 50.00 dollars for packaging. Shipping and insurance. Which it will if it goes across country. If it costs more to ship I will pay any overages out of pocket. My price is not set in stone so if you think I am off my rocker. just make an offer.
|
|
|
MARION PADDLE MIXER 40 HP DRIVE 42" WIDE X 12' LONG fully refurbished
Fully Refurbished MARION PADDLE MIXER 40 HP DRIVE 42" WIDE X 12' LONG Why pay new price? Buy a great used machine instead. Your plant is running on used equipment right now. So why pay new price to replace it or add on? Ask if your current equipment company goes the extra mile for you to ensure quality for years to come. The paddles have been replaced with brand new ones. This model also has a 40 HP motor and is in good condition. You're getting a top quality mill at the best price as always from Continental Agra Equipment. As a family owned and operated business since 1981. We have the experience to help you with all your equipment needs. Experience the Continental Agra difference! What makes our equipment better than the rest? Our rebuild includes taking the machine apart We check all parts for wear Replace all necessary wear ... moreparts Replace any necessary seals or bearings Test run equipment We include the components many others leave out(such as feeders, conditioners. And motors) so what you see is what you get, no tricks We include a 30 day right of refusal on all units. As well as a 30 day parts warranty on all refurbished units. We can also modify equipment to your specifications. We have an experienced team of quality equipment re-builders and custom fabricators to meet your needs. Call me, Jason, today at 316-283-9602, or email me at jason@continentalagra.com to discuss how we can meet your needs. We look forward to serving you. Check out my!
|
|
|
1 hp Mooney Mixer, Sweep Blade, vari speed.
INGALLS PROCESS EQUIPMENT COMPANY MORE THAN JUST INDUSTRIAL EQUIPMENT ITEM NUMBER: 1155 1 hp Mooney Mixer. Sweep Blade, vari speed. ITEM DETAILS One(1) used 1 hp Mooney Disperser. Sweep blade. 3 phase. 208,220/440 volt. Varidrive Manual hydraulic lift. 1" dia. shaft. 12" long shaft 10" sweep blade. PAYMENT AND SHIPPING TERMS· We accept the following types of payment– PayPal. Bank Wire Transfer, Company Check, and Cashier’s Check. Please be aware that we do not accept Personal Checks. Or direct payments from all credit cards. Also. We must verify that the check has cleared our bank for payment prior to any merchandise being shipped. All payments must be received within 10 days of purchase or auction unless previous arrangements have been made. If payment is not received within 10 days and you have not contacted us regarding ... morepayment arrangements you will be reported to eBay and the item you purchased will be relisted. To ease transactions please include the eBay item number with all forms of payment and correspondence. Items are also listed on our website www.ingallsequipment.com while supplies last. Shipping details– Units will be loaded on a flat bed truck or banded to a standard pallet. Crating will be charged per item. All items are sold as is. We will run items prior to selling if we can. Please ask us about this before you bid. We will gladly tell you the results. Items will be placed on a pallet and banded down at no charge to the buyer. All crating costs or skids(besides a standard pallet) will be the responsibility of the buyer to pay. Contact us for a quote. We will load equipment that we sell at no charge. We will not pay freight charges no matter what the special instructions a buyer may type into his or her bid. You are welcome to inspect any of the equipment we sell or contact us for more pictures or more description. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-1407cdc702f-0xfc-
|
|
|
Antique Hit Miss Stationary Engine IHC "M" Carb / Mixer for 6 hp, McCormick
I have a previously refurbished carb for a 6 hp IHC"M" engine. It is the two needle kero carb. Suitable for the early ignitor engines.The start-run valve moves and has a new brass handle brazed on. The drain and gas fill plugs have been remanned, I'm sure. The choke plate is also a shop built replacement. I've never used the carb on an engine so it may yet need some tinkering but it should be ready to go. The two needle valves are original brass too. See pics for best description. Selling as is to avoid disputes. Weighs almost 10.5 lbs. Shipping costs have risen tons since I first started selling on eBay. 5 years ago, I could have mailed this for a 20 dollar bill anywhere in North America! Shipping will be actual cost, $35-$45 USD depending how far you are from Ontario. Simply bid accordingly. It'll be about 85 bucks ... moreto Int'l destinations. I accept PayPal, cash on pickup and other forms of payment. Thanks for looking. As always. Please ignore the useless shipping calculator. Thanks. 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1407fb3ca5c-0xf2-
|
|
|
Hobart P660 60 QT 2 1/2 HP Pizza Dough Mixer SS Bowl Pelican Head & Attachments
Model: Hobart P660 Voltage: 220 Phase: 3 phase This mixer is designed for heavy dough. Whether that be pizza, pretzel or bakery. We have been all through this machine to make sure it runs smooth in both gears, and is quiet. We have changed the oil and made sure all greased parts are consistent and no grease needs replacing. Pelican head and all attachments shown are included. Mixer shown is the mixer you are bidding on. You will NOT be disappointed. Call us any questions 804 262 3777 Posted with
|
|
|
HP Agilent 5086-7795 Dual Mixer
HP Agilent 5086-7795 Dual Mixer Although we welcome your questions and inquiries by e-mail or phone. Bidders are expected to do their own research in regard to the compatibility and/or software/driver requirements for any item they are considering purchasing. In most cases. All information that we have available to us is included in the text of the auction. HP Agilent 5086-7795 Dual Mixer Model No. 5086-7795 No manuals. Cables, or accessories included, sold as pictured. Used. Untested, system pull, guaranteed 30-Days. Condition Used, Warranty 30-Day Warranty. This item is sold with a 30-day warranty. The seller reserves the right to choose to either replace or refund at our discretion, based on the availability and feasibility of replacement product. Items returned for warranty replacement or refund will be subject to return shipping at buyer's ... moreexpense. Shipment of replacement items will be done at seller's expense(Ground shipping) In the event of refund due to product failure. Full purchase price will be refunded to buyer within three business days following receipt& inspection of return. Items must be returned in original packaging or similar packing, insured for purchase value. No Refund will be made for shipping costs. Should Seller accept a return of working product. Or if buyer requests an exchange, a 15% re-stocking fee will apply, based on the final selling price, with a $5.00 minimum. For items that may occasionally be received damaged in transit. Buyer must notify seller immediately upon receipt. Original packaging must remain intact. Seller will initiate a damaged claim with the appropriate carrier, and determination of refund/replacement will be made by seller following carrier's inspection of the damaged package. Items Shipped to destinations outside the United States will have any and all warranties voided. Domestic Shipping Information Free shipping, International Shipping $15.00 service charge will be applied to international shipments. Warranty will be voided on items shipped inte
|
|
|
Lightnin XJ30 .30 HP Mixer (MX2101)
Inventory# MX2101 Manufacturer: Lightnin Model# XJ30 HP: 30 Shaft Size: 3/4" x 45"L Prop: 3 Blade Drive: Gear Clamp: Yes Serial# 95/E28625 Volts: 208-220/440 Actual weight = 100 lbs. Ship via freight. 1725/1450 RPM. For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
Lightnin .87 HP Mixer (MX2100)
Inventory# MX2100 Manufacturer: Lightnin HP: 87 RPM: 1750 Shaft Size: 3/4" x 46"L Prop: 3 Blade Drive: Gear Clamp: Yes Volts: 230/460 Actual weight = 100 lbs. Ship via freight. For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
Husky 1/2 Hp Portable Cement Mixer works great
This is for a Husky 1/2 hp concrete mixer. I am the original owner. This mixer is in great working condition. I am so glad I bought this instead of hand mixing the bags. I am out of the construction business so I am selling off items I do not need. his item is for pick up only. Any questions just ask.
|
|
|
Sumitomo SM-Bevel Buddybox 18 RPM Tank Mixer w/ 1 HP SM Cyclo Motor Type TC-FX
SM-Bevel Buddybox 18 RPM Mixer w/ 1 HP SM Cyclo Motor 230/460 VAC Type TC-FX USED MIXER MOTOR WITH GEAR REDUCER. WE HAVE MANY OF THESE ITEMS. ALL ARE IN SIMILAR CONDITION. ALTHOUGH THE HEADER PICTURE HAS BEEN CLEANED. THE ONE YOU RECEIVE MAY NEED CLEANING. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS. EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR MORE INFORMATION. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: OVERALL DIMENSIONS: WIDTH: 9" LENGTH: 24" HEIGHT: 10" SHIPPING WEIGHT: 170 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; ... moreWE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ M
|
|
|
I.H.C. LB 3 - 5 HP Mixer Gas Fuel Hit Miss Vintage Engine McCormick Deering Carb
This is a Nice Used Mixer/ Carb. For a 3-5 HP LB IHC engine. It comes complete with original bolts. This seems to be in Very Good Used condition. Everything that is supposed to move does so. Comes as pictured. No cracks.Breaks or welds. Any? or more pic's please ask. Thanks
|
|
|
Chemineer inc Mixer , Model 5JTO-0.33 , 1/3 Hp
CHEMINEER INC MIXER MODEL 5JTC-0.33 RELIANCE MOTOR 1/3 HP 1725 RPM. 115/208/230 VOLT, 6.4 AMPS MOTOR CAT# D79C2429M TYPE CS USED*NOTE* WE SELL IN STORE AS WELL AS E BAY. CHECK QUANTITY.
|
|
|
Mixer , Leeson 1/4 Hp , 1725 Rpm , # C4C17FB21A
MIXER LEESON MOTOR 1/4 HP 1725 RPM. 115/208/230 VOLT, 5.4 AMPS MOTOR CAT# C4C17FB21A USED*NOTE* WE SELL IN STORE AS WELL AS E BAY. CHECK QUANTITY.
|
|
|
Lightnin Mixer , Model XJQ-33VM , 1/3 Hp
LIGHTNIN MIXER MODEL XJQ-33VM RELIANCE MOTOR 1/3 HP 1725 RPM. ARM VOLT 90, 3.6 AMPS TYPE TPR MOTOR CAT# V76R4576P-ZN USED*NOTE* WE SELL IN STORE AS WELL AS E BAY. CHECK QUANTITY. 265ae.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E%3F265ae-140eb59e046-0xfa-
|
|
|
Wheelbarrow Mixer (Kushlan) 6 cu ft 3/4 hp, 120v
Used once and in bristol condition Kushlan Wheelbarrow Mixer. 6 cu. Ft. 120v, 3/4 hp. Will probably have to frieght ship I can help or you can arrange. Buyer is responsible for shipping charges. 181 lbs. shipping weight:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-140ec9901e3-0xf5-
|
|
|
Whip Mix Dental Combination Unit 1/3 HP with Vacuum Mixer
Whip Mix Dental Combination Unit 1/3 HP with Vacuum Mixer 1/3 HP Wall mount Combination unit and vacuum mixer, Fully tested;works great, 6 month warranty Questions? Message us or call us at 859-881-3996. SEE OUR OTHER PRODUCTS PAYMENT If you wish to pay with a method other than PayPal please call us at the number listed above. We expect payment within 7 days of invoice as per ebay policy. Please read below before payment. RETURNS Unless item is damaged or inaccurately described. A 25% re-stocking fee will be charged. LEASING Options available. Call us for more information. SHIPPING Pricing: Ebay automatically calculates shipping costs. Which may be inaccurate. Whether or not this is the case. If you have a problem with the price or service listed on the invoice for shipping please contact us BEFORE PAYMENT and we will try to correct the problem. ... moreSpecial requests: Please contact us for special shipping requests(alternative services. Speeds) BEFORE PAYMENT and we will invoice you accordingly. We may combine shipping for multiple orders. Handling time: Handling time of items as-is varies from 1 business day for small items to 7 business days for large chair packages. This starts from the time of payment. Customizing items such as stools and chair packages adds additional handling time. International shipping: We can ship to many countries. Please contact us for a shipping quote and provide your address. Keep in mind we are not responsible for taxes. Duties, or customs fees imposed by your country. LARGE ITEM/ FREIGHT DELIVERIES: Any item that requires a pallet for shipping(cabinets. Chair packages, track lights, etc. will be sent by one of several freight companies. It is NOT the responsibility of the freight company to remove these items from the pallet and take them inside your location. WHITE GLOVE SERVICE can be requested for an additional fee if you need these accommodations. WE ARE NOT A SHIPPING COMPANY! WE ARE NOT RESPONSIBLE FOR ANY DAMAGE CAUSED BY THE FREIGHT COMPANY DURING DELIVERY. PLEASE IN
|
|
|
Lightnin Mixer , Model XJ35, ,65 Hp , 115/240 Volt
LIGHTNIN MIXER MODEL# XJ35.65 HP RELIANCE MOTOR CAT# E77R3028T-ZU 1725/1425 RPM 115/230 VOLT USED*NOTE* WE SELL IN STORE AS WELL AS E BAY. CHECK AVAILABILITY.
|
|
|
Lightnin Mixer , Model ND-1VM , 1/3 Hp , 90 Volt
LIGHTNIN MIXER MODEL# ND-1VM 1/3 HP RELIANCE MOTOR CAT# 711200-PB 1725 RPM 90 VOLT DC USED AND NOT TESTED*NOTE* WE SELL IN STORE AS WELL AS E BAY. CHECK AVAILABILITY.
|
|
|
Lightnin Mixer , Model XJC-65 , 1.17 Hp , 3 Phase
LIGHTNIN MIXER MODEL# XJC-65 1.17 HP RELIANCE MOTOR CAT# R607473-G873 1725 RPM 208/230/460 VOLT. 3 PHASE USED AND NOT TESTED*NOTE* WE SELL IN STORE AS WELL AS E BAY. CHECK AVAILABILITY.
|
|
|
Chemineer inc Mixer , Model 5JTC-0.33 , 1/3 Hp , 3 Phase
CHEMINEER INC. MIXER MODEL# 5JTC-0.33 1/3 HP LEESON MOTOR CAT# C4T17FC10A 1725 RPM 208/230/460 VOLT. 3 PHASE USED AND NOT TESTED*NOTE* WE SELL IN STORE AS WELL AS E BAY. CHECK AVAILABILITY.
|
|
|
USED LIGHTNIN MIXER WITH SHAFT 43-1/4" LONG 7/8" DIA, MODEL: XJ-174, HP: 1.74
USED LIGHTNIN MIXER WITH SHAFT 43-1/4" LONG 7/8" DIA. MODEL: XJ-174, HP: 1.74 DURA-MIX MOTOR MODEL B77RGC7ON-WY P/N 123986 This item was removed in operating condition from local manufacturer. We cannot test this item so it is being sold"AS IS WITH NO WARRANTY" We buy and sell pre-owned surplus products and company inventory reductions. We are not representatives or authorized distributors. Nor are we affiliated with any manufacturer. Brand or product listed. Designated trademarks, brand names and brands appearing in our ads. Are the property of their respective owners. Purchaser(s) Their agents, assignees or affiliates assume all responsibility& liability for use. Miss-use or application(s) of the item(s) purchased from this seller. SHIPPING Shipping must be paid in advance. No shipping on week-ends or Holidays, no ... moreshipping on Customer Accounts. Ship internationally USPS Only. The full value of purchase will be declared on Customs Forms All value fees and taxes are the sole responsibility of the buyer. Please consider these terms carefully before bidding on. Or purchasing this item. Refer to your order details page for your tracking number to track your package. If you would like a copy of your invoice or a packaging slip. Then please specify this with your payment at check out. FREIGHT Any freight items is left up to buyer to set up a freight company and pay all shipping charges. We offer to build crating for any item for a fee. Depending on size of item. We do not have a loading dock for trucks but are able to load trucks with fork lifts. Please contact us if you have any questions. We appreciate you and your business. If you have any questions or concerns about your purchase. Let us know BEFORE leaving feedback. We try to provide honest, detailed and accurate descriptions of all items. We strive for 100% customer satisfaction. We try to keep the shipping cost as low as possible& provide an efficient and reliable service. Posted with
|
|
|
HP 11970K, Low Loss, 18 to 26.5 GHz, Waveguide Harmonic Mixer
HP 11970 K Waveguide Harmonic Mixer Low Loss. 18 to 26.5 GHz Max Input Power +20 dBm AVG*We Ship WorldWide* FedEx. UPS, USPS, DHL– PrePay& Add or on Your Account* Purchases Include a 14 Day Money Back Guarantee* BestTestUS Sells all Types of Hard to Find Parts and Accessories That We Have Acquired Over the Past 25 Years! BestTestUS is a Part of Tech-Systems Electronics. Inc. Est. 1989) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-140f6def43f-0xfc-
|
|
|
OLD VINTAGE HP HEWLETT PACKARD HARMONIC MIXER MODEL 934A VHF SHF VID ESTATE FIND
VINTAGE HARMONIC MIXER Vintage HP Hewlett Packard Model 934 A Harmonic Mixer VHF SHF VID Estate find; Untested; Sold as found Please ask all the questions you want BEFORE you purchase! We'll be happy to answer you. Usually within a couple of hours. FREE U.S. Shipping! ~~~~~ Ask all the questions you want; we'll be happy to answer you usually within a couple of hours! We DO accept returns. BUT please be sure before you purchase! Buyer pays return shipping unless item is significantly different than described. PAYPAL please! California Sales Tax is collected for California buyers. We ship USPS or FedEx(in spite of the mandated UPS ebay template) And we ship within ONE day. Often SAME DAY! See our Feedback Score and Top Seller Status to purchase with confidence! YOU'LL LOVE THIS! OR WE'LL BUY IT BACK! 6.4.4-4#Nov 2012
|
|
|
hp 11970a harmonic mixer 26.5-40ghz guarantee good
HP 11970a harmonic mixer 25.6-40ghz nice condition guarantee good
|
|
|
Gilson 6-1/2 CU FT Towable Concrete Mixer 8 HP Briggs & Stratton 59020A Gilco
SKU: 2474487 A: 0013000000CXCfg O: 0065000000OT29Z PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Gilson 6-1/2" Cu.Ft. Concrete Mixer in good operating condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Gilson(CF Gilco Inc. Model: 59020A Serial Number: 9003639 Transport Weight: approx. 1.100 lbs. ... moreTransport Dimensions: L 80" x W 70" x H 61" Features: All Steel construction Quad-Mixing System Heavy-duty utility mixers suitable for concrete Specifications: Capacity: 6-1/2 Cu. Ft. Engine: Briggs& Stratton Max Output: 8Hp Fuel: Gasoline Starting Method: Recoil RPM: 25 Tires: 4.8-12 1-7/8" ball hitch Resources: For more information on this unit including full specifications, view the manufacturer’s brochure(pdf) Inspection Report Overview Comments Overall Appearance Unit overall appearance is good Overall Operating Condition Good overall operating condition for age Engine Starter(recoil) Functional Exhaust System No problems noted Fuel System Fuel line is weather cracked-fully functional recommended repair Oil Leaks No leaks noted- average build up for age Fan/ Belts Functional Comments Units engine is in average overall condition for prior usage Chassis Sheet Metal/ Body Average Paint/ Decals Average Tire Condition Good see photos Tire Tread Depths 4/32" Comments Units chassis is in good overall condition see photos Specialty Equipment Hitch 1-7/8" ball w/o electric plug Hour meter Not equip Comments Specialty equipment is in good overall cond
|
|
|
Hockmeyer 5 HP Air Lift Disperser ( Dispersion Mixer ) - AS-IS Parts or Rebuild
Hockmeyer 5 HP Air Lift Disperser Set up for 55 gallon Drums Requires a complete Rebuild Atlantic Equipment Inc. 363 Petticoat Lane Bloomingburg. NY 12721(845)807-8727 We do our best to photograph and describe accurately. Contact(845)807-8727 with any questions. Thank you for looking and good luck if you are bidding. Pat Dolan
|
|
|
Lightnin .87 HP Mixer (MX2105)
Inventory# MX2105 Manufacturer: Lightnin HP: 87 Shaft Size: 3/4" x 48" Prop: 3 Blade Drive: Gear Clamp: Yes Volts: 208-220/440 Actual weight = 80 lbs. Ship via freight. 1725/1425 RPM. For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
GE .5 HP Mixer (MX2103)
Inventory# MX2103 Manufacturer: General Electric Model# 5KC37RN24G HP: 5 RPM: 1725 Shaft Size: 5/8" x 48" Prop: 3 Blade Drive: Direct Clamp: Yes Volts: 115/230 Actual weight = 40 lbs. Ship via freight. For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
GE .5 HP Mixer (MX2102)
Inventory# MX2102 Manufacturer: General Electric Model# 5KC37RN24G HP: 5 RPM: 1725 Shaft Size: 5/8" x 48" Prop: 3 Blade Drive: Direct Clamp: Yes Volts: 115/230 Actual weight = 40 lbs. Ship via freight. For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
US Plastic Corp ,100 gallon plastic Tank with 1/3 HP Mixer and Shaft/Propellers
You are bidding on a US Plastic Corp.100 gallon plastic Tank with Dayton Electric Motor 1/3 HP Mixer. RPM-1725. V-115/230, FLA-6.8/3.4, Fr-D56, Hz-60, Ph-1.Comes with stainless steel shaft(32" long)with two, three bladed stainless steel propellers(4"OD) The tank has a little ware on it.Has drain hole in the bottle of tank.Cone shape bottom.Does not have any leaks.Comes with top.Also comes with the blue frame holding the tank.Unit runs good.Has no Off/On switch.Has no adjustment of rpm's.Direct hook up to outlet only.Runs good. Please look at photos. Buyer pays shipping from 46818. If your item is to be shipped common carrier and a lift gate is needed and it is being delivered to a residence please advise. There will be an additional charge for lift gate/residence delivery. You are welcome to set up your own trucking form zip ... more46818 email with zip for a shipping quote. For larger items that need a freight qoute unless you are picking up your items and arranging your own freight,please Do not pay for item until shipping costs is figured out by us.Then we can send you and a invoice with your freight included.Thank you! All liability of use is assumed by the buyer. No warranty offered or implied other then stated on ad. Guaranteed non-DOA with a 15 day ROR. Unit weight- 200 Lbs. PLEASE READ OUR CONDITIONS OF SALE BELOW BEFORE PLACING YOUR BID! Payment& Shipping Terms:NOTE: ITEMS THAT SELL OVER $1000.00 OR MORE.WE PREFER HAVING WIRED FUNDS OR PAY BY CERTIFIED CHECKS.We take wire transfers,cashiers checks,personal or business checks.We also take Paypal payments. Personal or business Checks will take 3 to 5 days to clear. We will NOT ship any item sold until money is received into our bank account and it has cleared.We will have up to 5 business days to ship item once the money is in our account. Because of the amounts of items that we are shipping we will ship out items once a week.If you would like an estimate of shipping, all shipments will be shipped from zip code 46804 and the items estimated weigh
|
|
|
HP/Agilent 5340A Frequency Counter Microwave RF Mixer Sampler 5088-7004
Please read carefully before bidding You are bidding on RF Microwave Sampler mixer MFR: Hewlett Packard taken from HP 5340A- Frequency Counter. Model: 5088-7004. SMA Connectors. The item looks in good condition! Little sings of corrosion(See pictures) Subscribe to our mailing list My Policies: If for any reason. You are not satisfied with your purchase please contact us immediately by Email or Phone, before contacting eBay Resolution center or Leaving Feedback! If the item describe"as is" There will be no returns unless it is"not as describe" issue. The main title dose not necessarily describe the item. If you are satisfied with your purchase please leave us a positive feedback! Feel free to contact me via e-mail for questions or for additional photos. All e-mails will be answered as soon as possible! Please noted we are ... moreworking 6 days a weak between: 5:00AM(GMT) 14:30(GMT) Sunday throw Friday. PAYMENT PayPal Payment is accepted. INTERNATIONAL BIDDERS International bidders are always welcome. Taxes and customs duties are the responsibility of the international buyer. NOTE for Israeli buyers: The price dose not includes V.A.T. Please contact us for shipping and v.a.t. SHIPPING Shipping options: Registered. EMS, UPS, FedEx Buyer will pay actual postage charges. Your purchase will be carefully packaged for shipping using bubble wrap and/or shipping peanuts for fragile items. I cannot be responsible for uninsured packages that got lost or damaged during shipping. There is NO extra charge for packing materials or"handling" unless specified in the item description above. For the safety of the enviorment- We are using recycled materials for packing. Please let us know if you prefers new packing materials and we will charge you respectively. SHIPPING TIME We will ship the item within 5 business days after receiving the payment from the buyer. Buyer usually receive the item within 21 business days after the shipping. It all depends on the Post office and custom. If you haven't receive you
|
|
|
CHEMINEER 3HT-7.5 7.5 HP 1800RPM 155-UNIT OUTPUT PROCESS MIXER AGITATOR B246615
Brand: CHEMINEER Condition: Used Model: 3HT-7.5 Weight: 426 lbs Dimensions: 25 X 15 X 22 SKU: B246615 Category: Miscellaneous Additional Notes: PRICE? 7.5 HP 1800RPM 155-UNIT OUTPUT RPM PROCESS MIXER
|
|
|
Eastern Mixer Inc. 1/3 hp Agitator W/ 42" Shaft
Product: Eastern Mixer Inc.1/3 hp mixer Style: Clamp on Shaft: 42" Dual Propeller + 4" Collar Condition: Used and Running(item sold as-is) Needs a fan shroud for safety purposes but works without it. About Shipping: We put the freight calculator up because it is the easiest way for us to ship this. But. We don't care if you want to pick it up or work out some other way to get it shipped to you. But, if your money saving idea is going to cost us more than us strapping it to a pallet then it won't work without compensating us. Sorry, we want to be easy to work with and we've been bitten in the past. It's amazing how many people want to save money as long as someone else is paying for it. We'll try to get some accurate dimensions here soon.
|
|
|
Prochem Mixers 1 HP Mixer (MX2116)
Inventory# MX2116 Manufacturer: Prochem Mixers Model# JTQ100-45 HP: 1 RPM: 1725 Shaft Size: 1.5" x 118" Prop: 4 Blade. 42" Across Drive: Gear Clamp: No Serial# 93-M20329 Volts: 200-230/460 For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
Prochem Mixers 1 HP Mixer (MX2115)
Inventory# MX2115 Manufacturer: Prochem Mixers Model# JTQ100-45 HP: 1 RPM: 1725 Shaft Size: 1.5" x 118" Prop: 4 Blade. 42" Across Drive: Gear Clamp: No Serial# 93-M20329 Volts: 200-230/460 For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
Prochem Mixers 1 HP Mixer (MX2114)
Inventory# MX2114 Manufacturer: Prochem Mixers Model# JTQ100-45 HP: 1 Shaft Size: 1.5" x 118" Prop: 4 Blade. 42" Across Drive: Gear Clamp: No Serial# 93-M20329 Volts: 200-230/460 1725/1425 RPM. For shipping and handling arrangements. Please call Lanco Corporation@ 616-887-8300 or toll free@ 888-248-8500.
|
|
|
1 1/2 HP Fairbanks Morse ,Hit and Miss Engine Carburetor ,Mixer assembly
This came off of a running 1 1/2 HP Fairbanks Morse Throttle Gov. Engine It is complete and fully functional.Both needle.Valves work as does the butterfly,USA sales only,ask em if you got em,Thanks for looking,and have a nice day!
|
|
|
RAE TLine Talboys 101 Mixer Stirrer 120 Volt, 1/75 HP, 7500 RPM
RAE TLine Talboys 101 Mixer Stirrer 120 Volt. 1/75 HP, 7500 RPM Serial# A-2607(M-10-B) Here for your consideration is the RAE TLine Model 101 Mixer/Stirrer that powers on in good used working condition. This unit stirs and spins slow or fast. Control knobs turn easily and respond to adjustment. Please be sure to refer to all photos shown. You will receive the exact item shown. Specifications: 120 Volts 60Hz.35 Amps 1/75 HP 500-7500 RPM Unit has light scratches. Paint chips, and discoloration. Power cord has small tear exposing insulation. THANK YOU For considering our item! We have been selling on ebay for over 12 years! Bid With Confidence!
|
|
|
Hobart 140qt Mixer with new bowl, dough hook V1401 Fully Rebuilt 220 Volt 5 HP
Please Read Complete Listing and ask questions before bidding. Thank You Keith Morris 248-459-0507 Our reputation for attention to detail and quality has created a high demand for our refurbished mixers and VCM's. At the present time. Estimated delivery is about 2 to 4 weeks out. Please call before ordering to confirm a delivery date. Thank you! You are bidding on one Hobart 140qt Mixer with new bowl. Dough hook V1401 Fully Rebuilt 220 Volt 3 phase 5 hp( The same mixer can be purchased in 220 Volt Single phase 3 hp for $500 more) this is a Fully Rebuilt Mixer new bearings seals we put in new gear lube top and bottom all new controls new power cord. It is ready to direct wire to a box or we will put on a plug, you just have to tell us what the plug will have to be, this mixer is like new, You are always welcome to stop in to our shop and ... moresee first hand the high quality of our rebuilding process and our painting, all or our re-manufactured mixers get sanded down to mostly bare steel primed and painted with high quality DuPont paint, we do not use a can of spray paint from the hard ware store like most others do) Hobart Mixers is about 95% of all we do we are the number one used Hobart Mixer co. We have over 7 0 mixers in stock for sale as is or for re-manufacturing we do not sell the most but our High Quality makes us the best We have this same mixer with a Pelican h ea d o r grinder drive on the front of the mixer no extra charge If you wanted it painted any costume color add $00.00 to the price and it will take about 2 weeks for delivery look at some of our other mixers we have on ebay for some other color options Warranty Yes 120 day warranty buy with Confidence I see other people brag about best on Ebay than why do they not back it up. We have been selling mixer for about 10 years See FREE shipping below: Mixers can be ordered in most any color see pictures This runs like new You need to come and look at it and play with it! Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplore
|
|
|
USED 25 HP ADMIX INC ROTOSOLVER MIXER MODEL 180RS175
ITEM# 12131 USED 25 HP ADMIX INC. MIXER MODEL 180RS175 CONTACT US FOR MORE INFORMATION. ADDITIONAL PHOTOS PAYMENT& SHIPPING TERMS After clicking BUY IT NOW. Please wait to receive an Ebay Invoice which includes shipping BEFORE making your payment. Acceptable methods of payment include PayPal. Credit Card(VISA, MASTERCARD, AMERICAN EXPRESS, DISCOVER, etc. Bank Wire Transfer, Company Check and Cashier's check. SPECIAL OFFER: Choose to pay with check or wire transfer and be eligible for a 3% discount on your entire order. If paying by PayPal please use the Pay Now button on your eBay invoice to process your payment. If you wish to pay using other means please contact us to make those arrangements at your earliest convenience. Please be aware that we do accept Personal checks. However. We must verify that the check has cleared our bank ... morefor payment prior to any merchandise being shipped. All payments must be received within 10 days after purchase/auction unless prior arrangements have been made. If we do not receive your payment within 10 days and you have not contacted us regarding payment arrangements you will be reported to eBay and the item you purchased will be relisted. To expedite order processing please include the eBay item number. Item description and buyer ID with all forms of payment and correspondence. Shipping to be negotiated with purchase. Skidding/Crating available at additional cost. Items are also listed on other venues and are subject to prior sale.
|
|
|
Leeson Mixer , Model A4C17FC16A , 1/4 Hp
LEESON MIXER MODEL# A4C17FC16A 1/4 HP. 1725 RPM 115/208/230 VOLT USED*NOTE* WE SELL IN STORE AS WELL AS E BAY. CHECK QUANTITY.
|
|
|
Kady Mill Lab Roto-Stator Mixer w/ Baldor Motor EM3613T 5 HP
Kady Mill w/ Baldor Motor Model: EM3613T Contact Justin at 503.464.6013 with any questions. The unit is located in San Diego. CA. WORLDWIDE SHIPPING AND PACKAGING COSTS TO BE DETERMINED BY DESTINATION. Please read the terms and conditions below so that you understand how all our items are sold. Payment Options: ALL PAYMENTS ARE EXPECTED WITHIN 48 HOURS OF AUCTION CLOSE. WE UNDERSTAND THAT THERE ARE EXCEPTIONS. BUT COMMUNICATION IS KEY. PLEASE DO NOT BID IF YOU CANNOT PAY FOR THIS ITEM IN A TIMELY MANNER. Shipping Options: Smaller Items: Minimum shipping charge of $15.00. Items over $500. Must be insured at the buyers expense of $0.50, per $100. Freight Items: The buyer is responsible for coordinating shipment and is responsible for all freight and rigging(if required) costs. We can arrange freight shipments. You will be billed exactly as ... morequoted by my freight forward. With no mark-up, however at times this may be more than the cost of the actual item. Please ask for a quote prior to bidding, so there are no surprises. Freight items typically require payment by bank wire transfer or certified funds, since shipments and delivery confirmations typically do not conform with Paypal requirements. Local Pick-Ups: This option is available on many auctions. However we are not always on-site where the item is located. Please inquire before bidding. Typically there will be no additional charge for a local pick-up. However some larger items may require an additional rigging fee upon pick-up. Terms and Conditions: Most items that we sell are from plant closures and business liquidations. We typically wholesale directly from the facility closure. This means the items are still or have very recently been in production and under power. We strive to only sell quality items and do the best job possible in describing the items accurately. All items are sold as-pictured. Where-is. Please ask your questions before you bid. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-14155828d9e-0x104-
|
|
|
150 Gallon Stainless Steel Tank Cone Bottom and 3/4 Hp clamp mount mixer
J. Little Mercer Co. Inc. Stock no. A-4665 150 gallon SS TANK with stock no. B-3690 Neptune 3/4 Hp clamp mount mixer Dimensions 36" diameter x 36" w/ cone bottom. Flat top, hinged lid Construction/configuration stainless steel vertical Inlets/outlets 4" bottom center outlet. 10" to ground, 2" top inlet General data Mixer is 208-230/460v. 3ph with stainless steel shaft& prop Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards and US company checks accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. Be sure to check out our other items! All of ... moreour items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping.
|
|
|
Crown , 1.5 HP Cement/Mortar Mixer
1.5 HP Electric Mixer by Crown. Only been used for mixing powders. Has never had water in it. 2 years old with minimal hours. Always been indoors. This mixer is like new. Originally bought for $2195.00. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-14157c3fd89-0x104-
|
|
|
Lightnin Mixer and Aerator XJ-30VM 1/3 HP
Lightnin Mixer and Aerator 1/3 HP Model: XJ-30VM Contact Justin at 503.464.6013 with any questions. Located in Portland. OR. Buyer responsible for any required skidding or crating charges. WORLDWIDE FREIGHT SHIPPING AND PACKAGING COSTS TO BE DETERMINED BY DESTINATION. Please read the terms and conditions below so that you understand how all our items are sold. Payment Options: ALL PAYMENTS ARE EXPECTED WITHIN 48 HOURS OF AUCTION CLOSE. WE UNDERSTAND THAT THERE ARE EXCEPTIONS. BUT COMMUNICATION IS KEY. PLEASE DO NOT BID IF YOU CANNOT PAY FOR THIS ITEM IN A TIMELY MANNER. Shipping Options: Smaller Items: Minimum shipping charge of $15.00. Items over $500. Must be insured at the buyers expense of $0.50, per $100. Freight Items: The buyer is responsible for coordinating shipment and is responsible for all freight and rigging(if required) costs. ... moreWe can arrange freight shipments. You will be billed exactly as quoted by my freight forward. With no mark-up, however at times this may be more than the cost of the actual item. Please ask for a quote prior to bidding, so there are no surprises. Freight items typically require payment by bank wire transfer or certified funds, since shipments and delivery confirmations typically do not conform with Paypal requirements. Local Pick-Ups: This option is available on many auctions. However we are not always on-site where the item is located. Please inquire before bidding. Typically there will be no additional charge for a local pick-up. However some larger items may require an additional rigging fee upon pick-up. Terms and Conditions: Most items that we sell are from plant closures and business liquidations. We typically wholesale directly from the facility closure. This means the items are still or have very recently been in production and under power. We strive to only sell quality items and do the best job possible in describing the items accurately. However. Many of these items have not been personally reviewed and cannot be guaranteed. All items are sold as-pictured. Where-
|
|
|
Vollrath 110V 1 HP 30 Qt. Food Mixer 40758
Vollrath 110V 1 HP 30 Qt. Food Mixer 40758 Model: MIX1030 Item: 40758 Dose not come with mixing bowl or any attachments Quantity Available: 1 Shipping Weight: 289 lbs(AEJ151 9.1 L1) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged ... moreby the carrier. This is somthing we have no control over and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any
|
|
|
Hobart A120 1/4 hp mixer,with table and all attachments,Great working condition
Unit in good working condition Hobart A120 ¼ HP MIXER WITH ALL ATTACHMENTS and Brand New Table on wheels.
|
|
|
HOBART L800 ALL PURPOSE 80 QUART 1 1/2 HP PLANETARY MIXER WITH BOWL AND TOOLS
HOBART L800 ALL PURPOSE 80 QUART 1 1/2 HP PLANETARY MIXER WITH BOWL AND TOOLS Vestco Food Equipment Hobart L800 All Purpose 80 Quart Planetary Mixer Excellent condition! 60 DAY WARRANTY! 1 1/2 HP fixed speed motor Gear driven transmission 15 minute timer Four fixed speeds#12 attachment hub Includes a paddle. Hook, and bowl 208v 3 Phase 5.6 amps FOR MORE INFORMATION CALL US AT 760-747-1970 Trust your equipment needs to people with integrity. Resources and know-how. Vestco Food Equipment not only offers a wide array of program options and competitive pricing, but is fully committed to providing you with the personalized care and professional expertise that you deserve. We will ensure that your equipment needs are not only properly identified, but capably met. Owner Gary Vest knows how to help his clients weigh their options. Not one to rush ... morein. He begins with the first step-building confidence and trust. Vest knows the value of time and is available to meet customers at their place of business. Vest's approach is based on sincere attention to customer needs together with his business philosophy of quality. Integrity and professionalism. Feel free to contact us for any of your restaurant and bakery equipment needs. You may reach one of our sales representatives by phone. E-mail, or by simply filling out the customer service form below. Our staff at Vestco Food Equipment will be more than happy to assist you. Operation Hours: Monday through Friday 8 A.M. to 3:30 P.M. PST Address: Vestco Food Equipment. Inc. 1220 INDUSTRIAL AVENUE ESCONDIDO, CA 92029 Telephone& Fax: Tel: 888) 324-9849(Toll Free) Tel: 760) 747-1970 Fax: 760) 747-1939
|
|
|
Hobart 60 Quart Mixer H600 230 Volts 1 ph 1&1/2 HP Real nice with Bowl Hook
This is for one used Hobart 60 qt mixer model H600. It is 230 volts single phase 1&1/2 HP. It has been tested and found to be in excellent working condition. It comes with one bowl. A paddle and a hook. Being that it is single phase it can be used any were, in your home or garage. Payment thru PayPal or cash on pick up. In California there is 8% tax. This is a freight ship item. If you want a shipping quote I will need to know if it will be going to a business address with a dock or fork lift for unloading or will you need a lift gate delivery. Any home delivery will cost more.
|
|
|
5 HP Lightnin Series 10 Mixer 34 RPM with dual sets of blades and 14' mix shaft
This is a 5 day auction is for( one of two available) 5HP Lightnin Series 10 mixers geared for 34 RPM with two sets of four paddle 4' diameter mix blades on a 3" solid 316L stainless steel shaft that is 14 feet long. The shafts on these mixers can be shortened by your shop without issues. Just remember you can NOT make the shafts longer or you likely will have issues when you run the mixer. This shaft is a 3” thick because of its length but making it shorter in your shop and cutting a new blade lock notch will not impact the mixers performance. The mix shaft and blades are both made of 316 stainless steel. The mixers are both in very nice condition we just pulled them from a system at a former Intel Semiconductor plant and they run without issues. Here is a link to the manufactures website with more information on the Lightinin Series ... more10 Mixers. http:www.spx.com/en/lightnin/pd-mp-medium-top-entering-mixer-series-10/ This package comes with the mixer. Shaft and two sets of blades as well as the blade mounts and wedge locks. This auction is starting with a very low initial bid for a mixer like this with long shaft option. This is a very expensive mixer compared to similar mixers with shorter shafts. The winning bidder is responsible for directly paying the shipper. We will prepare and load at no additional charge. This system will ship from Colorado Springs Co zip code 80907. We get very good shipping rates and can hook you up with our LTL or flatbed carriers if desired to get a quote. Thanks for considering us for supplying your chemical process and waste water equipment. We have a massive inventory of high end tanks. RO systems, Ion Exchange tanks, Water Conditioning and pumps including Gould 316L Stainless Steel pumps and Mag pumps available. If you have additional questions please give me a call Mark 206-399-9717.
|
|
|
Mortar Mixer - Muller 8 HP Gasoline Mortar Mixer w/ Honda GX240 Engine
Muller Gas Mortar Mixer Make: Muller Vin: 128721, Engine: Honda GX240 Fuel: Gasoline Horsepower: 8 HP Name: Goldstar Equipment Supply Corp Sales Phone: 516.741.1000 Shipping Phone: 516.741.2600 Billing Phone: 516.741.1300 Address: 10 Windsor Court. Mineola, NY 11501 E-Mail: goldstarequipmentsupply@gmail.com Fax: 516.741.2700 Customer is responsible for shipping arrangement. Item will be released in one to three business days after full payment is received. Shipment picking up address is 10 Windsor Ct. Mineola, NY 11501. We can also assist customer with finding shipping arrangements. In state buyers will be charged state and local taxes and any other required New York State fees. Full payment is due within 3 business days from time of purchase unless prior arrangements are made. If you have any questions about payment terms. Please do not ... morehesitate to call us. Payment types accepted: Bank Transfer(Preferred) Certified bank check(Preferred) AMEX(For Out of New York State buyers) Any other Credit Card(For New York buyers only) Cash, and PayPal. Customers are encouraged to inspect. Operate, test, or drive anything we have for sale before buying it. Upon request, we can provide video of any item. This merchandise is being sold as is, with no warranty, expressed, written or implied. The seller shall not be responsible for the correct description, authenticity, genuineness, or defects herein, and makes no warranty in connection therewith. No allowance or set aside will be made on account of any incorrectness, imperfection, defect or damage. It is the responsibility of the buyer to have thoroughly inspected the merchandise, and to have satisfied himself or herself as to the condition and value and to bid based upon that judgement solely. The seller shall and will make every reasonable effort to disclose any known defects associated with this merchandise at the buyer's request prior to the close of sale. Seller assumes no responsibility for any repairs regardless of any oral statements about the merchandise. No r
|
|
|
Hobart MG2032 Meat Butcher Stainless Steel Heavy Duty 8.5 HP #32 Mixer Grinder
800x600 You are looking at a Hobart mixer grinder. Model Number: MG2032 Serial Number: 27-1110673 Voltage: 208 Phase: 3 Amperage: 30 Horsepower: 8.5 This Hobart mixer grinder came out of a local grocery store that closed. It was being used until they shut down. We hooked it up here at our shop and it runs(see video) STANDARD FEATURES. ■200 pound hopper capacity. ■55-60 pound per minute output through a 1⁄8" plate. ■7.5 H.P. grind motor and 1 H.P. mix motor. ■Convenient load and discharge height. ■Exclusive WEDGE cylinder insures full rate feeding for the entire batch. ■Separate mix and grind motors. ■Pneumatic foot control option for precise hands-free operation. ■Side feed option for tandem grinding(right side only) ■Crisp design for easy cleanup. Easy access to all hopper interior and exterior surfaces for full cleanup. ■Double wall ... moreconstruction for added sanitation. ■Seals are hand removable and interchangeable— no tools required. ■Counterbalanced lid. ■Double-sealed push button control panel with condensate heater. Included OPTIONAL EQUIPMENT: Hopper side feed inlet(right side only) What is"AS-IS” Strictly the way we received it from the previous owner. It may or may not be complete of all its parts and it may or may not run. We will disclose and represent the machine to you exactly as it is in our inventory for you to decide. This is a wholesale auction. All equipment sales are AS-IS and final. If you are looking for used equipment that is tested by our technician and ready to go. Please go to one our retail auctions. 937)832-8600- BHequip@Frontier.com Don’t see what you are looking for? Call to see if we have any in stock. We list items that are cleaned and tested on eBay but you never know what we just got in… PAYMENT B&H Used Restaurant Equipment does not offer credit terms. All items. Including applicable shipping charges must be paid in full prior to shipment. We accept Cash, Wire Transfers, Cashier Checks, Money Orders, VISA, Master Card and Discover. SHIPPING B&H Used Restaurant Equi
|
|
|
Clemform Gilson Walk-Behind Electric Wheelbarrow Mixer 3-1/2 Cu. Ft. 1/2 HP
SKU: 2474218 A: 0013000000CXCfg O: 0065000000O2q8D PA: View Photo Gallery. Calculate Shipping. Location: Kent. WA 98032 Item Description. This is a no reserve auction for a Clemform Gilson Walk Behind Electric Wheelbarrow in very good operating condition. This item is being offered by bidadoo auctions- The largest and most trusted online equipment and industrial auction service in the West. This item is currently owned by The Boeing Company. We have two great eBay stores to better serve you. View our construction and transportation equipment auctions for construction machinery. Fleet vehicles and heavy equipment. View our industrial. Tools and equipment auctions for industrial equipment and tooling. General rental tools, and small equipment. Overview: Make: Gilson Model: Wheelbarrow Mixer Serial Number: YCG7124 Transport Weight: approx.160 ... morelbs. Transport Dimensions: L 48" x W 44" x H 36" Features/ Specifications: Size:3-1/2" Cu.Ft. Output: 1/2 Hp Motor: Electric Drum Material: Poly Drum Gauge: 12 Drum Opening: 15-1/4" Frame: Welded Steel Handles: Fixed Condition: Unit is in very good overall condition Motor starts easily and runs well Normal wear from previous use in working industrial environment See photos for more details Please Note: Due to export requirements set by the consignor of this item. This auction is restricted to bidders with a US-based eBay account only. Additionally, we are not able to ship this item internationally(including Canada& Mexico) if the winning bidder: 1) is not a US-citizen-or- 2) is not bidding from a US-based eBay account. Like this equipment? Share it. Please Note: Inspections and condition report limited to sound. Sight, feel, and limited operational running/ testing. In addition, all conditions are cross-referenced with service personnel. Operators, and maintenance system records(when available) bidadoo. Inc. makes no guarantees to actual hours. Miles and/or operational condition. Photos and video take priority if there are discrepancies within this
|
|
|
Agilent HP 11970A Waveguide Harmonic Mixer 26.5 - 40 GHz w/ SMA Cables 5061-5458
Agilent/ HP 11970A Waveguide Harmonic Mixer. 26.5- 40 GHz w/ SMA Cables You are bidding on an Agilent/ HP 11970A Waveguide Harmonic Mixer with a frequency range 26.5 to 40 GHz. A pair of Agilent 5061-5458 SMA Cables(shown below) are also included. The Agilent 11970A waveguide mixer is a general-purpose harmonic mixer employing a dual-diode design to achieve flat frequency response and low conversion loss. These are achieved without external dc bias or tuning stubs. Manual operation and computer-controlled hardware operation are simplified because mixer bias and tuning adjustment are not required. The 11970A extends the frequency range of the Agilent N9030A PXA high-performance signal analyzer to the A-Band(26.5 to 40 GHz) It is also fully compatible with other Agilent spectrum analyzers including: the E4440A/46A/48A PSA(with Option AYZ) The ... moreE4407B ESA-E(with Option AYZ) the 856xEC, the 8566B(with a preamplifier) and the 7000 modular analyzer(with the 70907A/B external mixer interface module) An external diplexer is required to connect the 11970A with the N9030A PXA(with Option EXM) The recommended diplexer can be purchased from Agilent as model number N9029AE13 or from OML, Inc as model number DLP.313B. Features: Flat frequency response Low conversion loss No bias or tuning adjustments 100 mW safe input level You can view the specs for this unit here: This unit is in working condition. Has been fully tested and comes with a 5 day ROR should it not perform to your expectations. Please review description carefully before bidding. If you don't see it in the pictures, it is not included. Insurance is included in UPS shipping charges. I cannot ship internationally. I will accept payment for this item by Paypal only. Feel free to send any questions regarding this item to: in fact I encourage you to do so) If you have zero feedback. Please before you bid to let me know that you are serious. Otherwise I may cancel your bid before the auction closes. It should be obvious that you should only bid if you a
|
|
|
Agilent HP 11970K Waveguide Harmonic Mixer 18 - 26.5 GHz w/ SMA Cables 5061-5458
Agilent/ HP 11970K Waveguide Harmonic Mixer. 18 to 26.5 GHz w/ SMA Cables You are bidding on an Agilent/ HP 11970K Waveguide Harmonic Mixer with a frequency range of 18 to 26.5 GHz. A pair of Agilent 5061-5458 SMA Cables(shown below) are also included. The Agilent 11970K waveguide mixer is a general-purpose harmonic mixer employing a dual-diode design to achieve flat frequency response and low conversion loss. These are achieved without external dc bias or tuning stubs. Manual operation and computer-controlled hardware operation are simplified because mixer bias and tuning adjustment are not required. The 11970K extends the frequency range of the Agilent spectrum analyzers to the K-Band(18 to 26.5 GHz) The compatible Agilent spectrum analyzers include: the E4440A/E4446A/E4448A PSA(with Option AYZ) The E4407B ESA-E(with Option AYZ) the 856xEC, ... morethe 8566B(with a preamplifier) and the 7000 modular analyzer(with the 70907A/B external mixer interface module) Features: Flat frequency response Low conversion loss No bias or tuning adjustments 100 mW safe input level You can view the specs for this unit here: This unit is in working condition. Has been fully tested and comes with a 5 day ROR should it not perform to your expectations. Please review description carefully before bidding. If you don't see it in the pictures, it is not included. Insurance is included in UPS shipping charges. I cannot ship internationally. I will accept payment for this item by Paypal only. Feel free to send any questions regarding this item to: in fact I encourage you to do so) If you have zero feedback. Please before you bid to let me know that you are serious. Otherwise I may cancel your bid before the auction closes. It should be obvious that you should only bid if you are serious and do intend to complete the transaction. Any stated warranty will be voided if the unit is opened or if any calibration or lockout stickers have been tampered with or removed. Please note that shipping and insurance costs are non-refundable. I'm
|
|
|
Homogenizing Mixer 5 HP for Textile L-5043
HOMOGENIZING MIXER 5 HP. U.S. ENCLOSED MOTOR 60 HZ, 230/460 VOLT, 3480 RPM, 13.3/ 6.7 RPMS, ID#65-80890-595, SHAFT 39" LENGTH X 7" DIAMETER. USED IN TEXTILE.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1417a74cd95-0xf9-
|
|
|
Biro Mixer Grinder afmg 24 140lbs hopper 7.5 hp susage Meat burger turkey patty
Biro Mixer Grinder Model# AFMG 24 Serial number# 20777 HP 7.5/ 3 PHASE/ 220 V Made in the USA 32# Size Head Working capacity 140lbs Easy to disassemble and clean Stainless Steel lid with safety lockout has legs. Casters and footswitch 60 lbs output per minute. Power and productivity in a compact size make the AFMG 24 mixer grinder the choice for today's smaller meat rooms. Shipping: We will place on a pallet. Carton wrap, shrink wrap and strap in for standard ground transport. Crate is available at an additional charge to buyer. Shipping quotes given daily. Pickup at our Miami warehouse is always FAST, FRIENDLY AND FREE! Come by and inspect on our showroom floor. Any questions please ask for Ivette 305-371-7919 M-F 9AM-5PM EST. Check out my! Be sure to add me to your! By clicking the"buy it now" Make Offer" and/or"place ... morebid" button on this item you have agreed to and accepted all of our.
|
|
|
HP 11517A/11520A 12.4 to 40 GHz Waveguide Mixer + (WR-28) 26.5 to 40 GHz Adapter
HP 11517A& HP 11520A 12.4 to 40 GHz WaveGuide Mixer and(WR-28) 26.5 to 40 GHz Adapter*We Ship WorldWide* FedEx. UPS, USPS, DHL– PrePay& Add or on Your Account* Purchases Include a 14 Day Money Back Guarantee* BestTestUS Sells all Types of Hard to Find Parts and Accessories That We Have Acquired Over the Past 25 Years! BestTestUS is a Part of Tech-Systems Electronics. Inc. Est. 1989) Posted with
|
|
|
Tool Shop 3.5 CBF Cubic Foot 1/2 HP Portable Cement Concrete Mixer Iowa Pick Up
This Listing is For 1(One) Tool Shop' 1/2 H.P. 3.5 Cubic Foot Cement Mixer, Used P L E A S E N O T E: This Item Is Located in Fort Dodge. Iowa and Available for Free Local Pickup Only. No, That Does Not Mean You Do Not Have to Pay For the Item. That Means the Owner Will Not Charge You To Come Pick It Up(yes, I've actually been asked this. Seller Is Accepting Payment via PayPal or Cash ONLY! Green Money Only. No Money Orders. No Personal Checks. No Exceptions! First. Let me apologize for the lack of proper technical terms in this listing. I am not an expert on this type of equipment, I have merely been given the task of selling it. I do, however, have a contact person at this business who has been guiding/helping me. If you have any questions, please feel free to message me. I will contact him and get back to you as soon as I can. ... moreI check my eBay messages multiple times a day, and I answer ASAP; however, this situation will be a little different, as I will need to get a hold of my contact person, wait for him to answer me, and then get back to you. I want to help you, but I would appreciate your patience during this process. Thank you. Brand: Tool Shop Model# 244-8877 This has been tested. We plugged it in and hit the'On' button. And the barrel started turning immediately. It also stopped spinning/shut off right away when we hit the'Off' button. It seems to be working like it should. One wheel is broken/bent. You will probably want to replace this. I called Tool Shop's 1-800 number and it just rang and rang until I finally got a message saying'The machine is off' So I don't know how much a new wheel is. I may run into Menards to try to find out. I will revise my listing to add that info if and when I am able to obtain it. Approximate measurements: 55" Tall(including top of handle) x 27" Wide x 48" Deep This item is a bit dusty/dirty from sitting in the warehouse We have the Owner's Manual and will gladly send that along with you when you purchase this mach
|
|
|
Hercules, Economy, Arco, Jeager 1-1/2+HP Mixer, Hit Miss Engine Antique Oiler
I have an Fuel Mixer off a 1-1/2 to 2HP Hercules. Economy, Jeager, Arco Hit And Miss Engine. It's in really good shape with the choke plate. Ships USPS Parcel Post for $8.00. I pack everything with shipping foam and bubble wrap. Buyer to remit payment within ten days. I do combine on Shipping. Other Magnetos and Old engine parts to be listed soon. LOW RESERVE
|
|
|
HILL HOMOGENIZER MIXER 5 HP L-3629
HILL HOMOGENIZER MIXER 5 HP. 575 VOLT. USED IN TEXTILE FACTORY. PRICE DOES NOT INCLUDE PACKAGING. LOADING AND TRANSACTION FEES.
|
|
|
1/2 gallon 3/4 hp Abbe Stainless Steel Sigma Blade Jacketed Mixer 1 gallon total
J. Little Mercer Co. Inc. Data for equipment B-3567 3/4 hp SIGMA BLADE MIXER. Model/serial no. OAMP s/n A37815 Manufacturer ABBE ENGINEERING Dimensions one gallon bowl capicity. 1/2 gallon working Construction/configuration stainless steel jacketed. Vacuum Inlets/outlets 5" x 7" clamp lid. 3) 25" jkt General data lid has(2) 75" inlets. Chamber is 5" x 7" 6" deep Motor 1725 rpm. 75 hp Electrical data 208-230/460 volt. 3 ph, 3.2,3.0-1.5 amp. Please contact us for an overview of payment options 1-800-637-2371 or 508-679-1901 Major Credit cards accepted. Sorry no Paypal Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code or location. Business or residential. We can ship internationally if buyer takes care of Customs paperwork. ... moreBe sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Inspections welcome. Sold as is. Item to be paid in full before shipping. Sorry No PayPal
|
|
|
Mini Circuits Mixer same as HP 10514A Mixer .2-500 Mhz BNC Connectors
Mini Circuits mixer SAME as HP Mixer 10514A Mixer.2-500 Mhz BNC Connectors. Please use the ebay link to ask questions. Or call my cell phone 210-240-4803. PLEASE Ask Questions BEFORE you bid not after. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Summit Mixer same as HP 10514A Mixer .2-500 Mhz BNC Connectors
Summit mixer SAME as HP Mixer 10514A Mixer.2-500 Mhz BNC Connectors. Please use the ebay link to ask questions. Or call my cell phone 210-240-4803. PLEASE Ask Questions BEFORE you bid not after. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Vintage Vac U Vestor Whip Mix Model A! Dental Impression Mixer WORKS! 1/3 Hp
You are bidding on a vintage Vac U Vestor Whip Mix Model A as pictured. This dental equipment measures 13" x 8" x 7" and includes original power cord. The mixer has been power tested and the motor worked well when turned on. We did not test any other functions. Overall this motor is in fair condition with heavier signs of use. Expect heavier scuffs. Discolorations and scratches from use. A rare addition to any collection! Please refer to pictures for accurate condition. Shipping includes insurance and tracking number to ensure a safe transit. Check out my other auctions and bid with extreme confidence. Shipping& Handling Charge: FREE. The only method of payment accepted on this auction is PAYPAL. Or credit cards through Paypal. We ship to the U.S. only. All products will be shipped with a delivery confirmation number to ... moreensure a safe transit. Customer satisfaction is our number one priority. If for any reason you are not satisfied with your purchase. Kindly return the item within 14 days of receipt and we will refund you immediately. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1419c1fb42b-0x101-
|
|
|
Working Antique CMC 1925 Wonder Concrete Mixer Stover 2.5 HP motor
Auction for a rare antique collectible 1925 CMC Construction Machinery Corp Wonder concrete mixer with original Stover horizontal 1 piston motor. Motor is all original and in working condition. No. TB-267993. Speed: 575 Type: CT-2 2.5 HP 1923 Stover Motor Freeport(IL) Totally functional and transportable. Very rare in this condition, has some graffiti spray painted on painted surfaces Pickup only please in Chicago metro area(60477) No reserve. Questions please call Tom 224-301-7678
|
|
|
HP Agilent 5340A - Microwave Sampler Mixer 5088-7004 - Hewlett Packard (C4-1-8A)
This auction is for one used HP Agilent 5340A- Microwave Sampler Mixer 5088-7004 Has part numbers hp 5088-7004 8316-0325. Powered by
|
|
|
CHEMINEER 541191-1 2HP 2 HP TANK AGITATOR MIXER 230/460V VOLT 3PH 72" S/S SHAFT
CHEMINEER VERTICAL TANK MIXER SERIAL NUMBERS: 541191-1/ 541191-2 STAINLESS STEEL SHAFT SHAFT LENGTH: 6' 72" SHAFT DIA. 1" BLADE LENGTH: 6" MAX. CLAMP OPENING: 3" RELIANCE ELECTRIC MOTOR INFO HP: 2 VOLTS: 230/ 460 SERVICE FACTOR: 1.15 NOTE: ONE ITEM HAS LIGHT SURFACE RUST. AND WILL BE SOLD LAST. NOTICE: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEMS HAVE NICKS AND SCRATCHES. WHICH DO NOT AFFECT USABILITY. Condition: NEW. In box NEW. No box NEW. Old inventory X, USED. But in good working condition. USED. But in good working condition. Removed from closed plant. USED. SOLD AS IS DETAILS: PLEASE SEE PICTURES FOR MORE INFORMATION. ITEMS HAVE NICKS AND SCRATCHES. WHICH DO NOT AFFECT USABILITY. SOUTHBENDINDUSTRIAL. INC 803-222-0460 7am-4pm est Please call for expedited orders Auction Sales Policy: Your bid is a contract- ... morePlace a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! WE ARE HAPPY TO COMBINE SHIPPING ON MULTIPLE ITEMS COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. We generally ship via FedEx or USPS. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out the next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments. We must know if we will be shipping to a business, the business name, address, contact info, and if receiver has
|
|
|
Precision HD-60 - 60 Quart Heavy Duty Mixer - 4 HP - 208, 3 Phase - Demo
Welcome to MARCH EQUIPMENT The Midwest's Premier Pre-Owned Restaurant Equipment Dealer Serving the USA and Rest of World Precision Mixers are not the most well known mixers on the commercial food service market. But they do seem to be generating some buzz. Check out their website to see what I'm talking about: Let's clear the air a bit first. Yes. They're foreign-made mixers, but, really, what isn't these days? With this economy, we can't afford to be too choosy about these things. Do you have $16,000 to buy a Hobart mixer? Anyway, after having said all that, this HD-60 really seems to be a well-designed and well-made mixer. If you're just starting out and money's tight or you're replacing an old mixer and don't want to buy another old mixer, these mixers are for you. They are demo models that sat in ... morea warehouse. We bought them, cleaned them up, tuned them up, and are now offering them to you. We have two 60 quart Precision mixers for sale; a V-60 standard 60 quart mixer with a 2 hp motor and a HD-60 heavy-duty 60 quart mixer with a 4 hp motor. This ad will concentrate on the heavy duty HD-60. In addition to the 4 hp motor. You have a 3 speed gear transmission, 30 minute timer, and bowl guard. This mixer comes with a stainless steel bowl, dough hook, and paddle. This mixer uses 208V, 3 phase electricity. The Precision HD-60 sells for almost $12,000 new. We're offering our demo models for less than half that. For more information, check out the spec sheet here: We're asking $5895 for this mixer. Please contact Joe for more information. You can call me at the office at(630) 627-3031. Or on my mobile(630) 514-0649. Or, simply just reply to this ad. This item is backed by a 30 day parts/labor warranty within a 50 mile radius of our showroom in Addison. If you live outside our service area, in lieu of a warranty we'll give you an additional 5% off the purchase price. All of our items our guaranteed to be in working order when you receive them, no matter where you are
|
|
|
Lightnin Mixer Motor ONLY , Model 5K33GG486 , 1/3 Hp , 3 Phase
LIGHTNIN MIXER MOTOR ONLY 1/3 HP. 1725 RPM 230/460 VOLT CAT# 5K33GG486 USED NOT TESTED*NOTE* WE SELL IN STORE AS WELL AS E BAY. CHECK QUANTITY.
|
|
|
Chemineer inc Mixer , Model 3JTC-0.25 , 1/2 Hp , 3 Phase
CHEMINEER INC. MIXER MODEL# 3JTC-0.25 1/2 HP BALDOR MOTOR CAT# CWDL3504 1725 RPM 115/208/230 VOLT. 3 PHASE USED*NOTE* WE SELL IN STORE AS WELL AS E BAY. CHECK AVAILABILITY.
|
|
|
Hobart 60 quart mixer with 1 1/2 hp and attachments
You are bidding on a real nice Hobart 60 quart mixer. This mixer just came out of a local restaurant that closed. It has been gone thru by our tech and runs great. This mixer has been cleaned and painted and runs perfect. It comes with a bowl. Hook, paddle and whip. It runs off 200 volt and 3 phase. It has the more powerful 1 1/2 hp motor. Much more powerful then the regular 1 hp. Feel free and come and test it out or call us at 802-373-1723.This item will be shipped via freight company for a flat fee of $400. If you need a lift gate on the truck add $75, if it's delivered to a residential address add another $75.
|
|
|
HP / Agilent 33801B Gold Frequency Mixer SMA Male / Female
HP/ Agilent 33801B Gold Frequency Mixer SMA Male/ Female A Gold HP/ Agilent Frequency Mixer. Model: 33801B, Connectors: SMA Male to Female Please take a look at all of the provided photos before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: Used- This item is untested. Return Policy: We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Shipping Info: Shipping weight is 13 ozs. Shipped from the Los Angeles area. zip 90221) Default Shipping Service: USPS First Class Package California residents will be charged 9.00% sales tax. Tennessee residents will be charged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax to any shipment sent anywhere in either state. We ... moreaccept the following methods of payment: For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. If the item is returned/rejected from your country for any reason. We are happy to refund the cost of the item only, less any eBay fees and shipping costs. If you still want the item, we are willing to try and re-ship; this will require you to pay the applicable shi
|
|
|
11974Q HP/Agilent 33-50 GHz Preselected Millimeter Mixer
Thank you for looking at this great deal on a HP/Agilent 11974Q. 33-50 GHz Preselected Millimeter Mixer. This unit is in good working and cosmetic condition and comes with a 14 day right of return and 30 day warranty(as long as item is unopened) NOTE: In the unlikely event that unit fails within the first 30 days we must be notified within 30 days after receipt for refund or replacement. Buyer is responsible for safe return shipment to seller. If warranty stickers are removed. This will void any warranty. Local Pick Up Available IL Tax applies to IL residents. CA Tax applies to CA residents Item sold as pictured- All Items are subject to prior sale. All items are shipped in a secure box with foamed in packing to insure safety of item during shipment. Shipping Weight:14 lbs Shipping Dimensions:24x15x12(inches) International Orders must pay ... morethrough a verified PayPal account. International Shipping charges will be added to final bid price. via UPS Worldwide or FedEx International) We do not add to shipping cost. You pay actual shipping cost only. Shipping Note: Please allow 1 to 2 business days after payment for shipment. We do not ship or process orders on weekends. Please contact us if you have any questions. We are here to answer questions Monday through Friday 8am- 5pm CST. JDP*
|
|
|
HP K914B / 11520A Waveguide Mixer Adapter Set
HP K914B/ 11520A Waveguide Mixer Adapter Set 12.4 to 40 GHz*We Ship WorldWide* FedEx. UPS, USPS, DHL– PrePay& Add or on Your Account* Purchases Include a 14 Day Money Back Guarantee* BestTestUS Sells all Types of Hard to Find Parts and Accessories That We Have Acquired Over the Past 25 Years! BestTestUS is a Part of Tech-Systems Electronics. Inc. Est. 1989)
|
|
|
10 hp ribbon mixer with rolling hopper 42 cu ft runs great
10 HP Ribbon Blender Model 2N986 Capacity 42 cu ft inside dimensions: 66 inches long X 26.5 inches wide X 30 inches high Dayton 3 phase AC motor rolling hopper measures 48 inches X 40 inches X 22 inches overall dimensions are: 125 inches long X 52 inches wide X75 inches high Hinged steel top has steel cable hooked to a counterweight for easy opening and closing Gear box has forward and reverse Local pick up.
|
|
|
LIGHNIN MIXER 1.5 HP MODEL # ND-4
LIGHNIN MIXER 1.5 HP MODEL# ND-4 Click Thumbnail to View a Larger Photo View Other Photos of this Item Description Model ND-4 1.5 HP Ratio: 5 Output RPM: 350 Input RPM: 1800 7/8 Shaft Buyer pays freight shipping. International shipping available Subject to prior sale. Valley Reference Number: 63004 Contact Information Valley Equipment Company. Inc. 3903 West Market Street Johnson City. TN 37604 Hours: Phone: Fax: Email: Mon-Fri 8am- 5pm EST(423) 753-3541 or(800) 832-3541(423) 753-3589 Seller warrants that it is the true and lawful owner of the equipment. That the same is free from all encumberances, and that seller has a lawful right to sell same. SELLER MAKES NO REPRESENTATION OR WARRANTY THAT THE EQUIPMENT IS MERCHANTABLE OR THAT IT IS FIT FOR A PARTICULAR PURPOSE. Except as here stated all warranties, express or implied, are excluded. ... moreSeller shall not be liable to purchaser, or any other person, for an indirect or inconsequential damage arising out of sale or use of the equipment. Buyer has inspected the equipment, or waived such inspection, and is satisfied with the condition thereof. Buyer assumes all risk and agrees to indemnify and hold harmless the seller against all claims and liability arising out of any condition, property or use of the equipment whether or not the claims and liability are for negligence of seller.
|
|
|
LIGHTNIN MIXER 1.5 HP MODEL # ND-4
LIGHTNIN MIXER 1.5 HP MODEL# ND-4 Click Thumbnail to View a Larger Photo View Other Photos of this Item Description Model ND-4 1.5 HP Ratio: 5 Output RPM: 350 Input RPM: 1800 7/8 Shaft Buyer pays freight shipping. International shipping available Subject to prior sale. Valley Reference Number: 63004 Contact Information Valley Equipment Company. Inc. 3903 West Market Street Johnson City. TN 37604 Hours: Phone: Fax: Email: Mon-Fri 8am- 5pm EST(423) 753-3541 or(800) 832-3541(423) 753-3589 Seller warrants that it is the true and lawful owner of the equipment. That the same is free from all encumberances, and that seller has a lawful right to sell same. SELLER MAKES NO REPRESENTATION OR WARRANTY THAT THE EQUIPMENT IS MERCHANTABLE OR THAT IT IS FIT FOR A PARTICULAR PURPOSE. Except as here stated all warranties, express or implied, are excluded. ... moreSeller shall not be liable to purchaser, or any other person, for an indirect or inconsequential damage arising out of sale or use of the equipment. Buyer has inspected the equipment, or waived such inspection, and is satisfied with the condition thereof. Buyer assumes all risk and agrees to indemnify and hold harmless the seller against all claims and liability arising out of any condition, property or use of the equipment whether or not the claims and liability are for negligence of seller.
|
|
|
Schold 10 Hp Disperser Dissolver Mixer
10 hp mixer stainless steel shaft variable speed air over hydraulic lift Posted with
|
|