|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Morgan Hill, United States Sergeant Shrink Tunnel This Sergeant flexible packaging machinery shrink heat tunnel is for sale as is. Machine: Shrink Tunnel Model: 92416-BC Serial ... moreNo:021816 Amps: 13 Volts: 220 Phase: 1 Drive: Motor Speed: Adj. This item is available for local pick up only. If shipping is desired. It will be at buyers expense. We will gladly assist with loading. Payment is required within 48 hours of making purchase.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: OT-MLLCR-3012-US-1 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board Product Parameters: ... moreLap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800W Welding Strength: ≥85% Base Material (Tensile Resistance In Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5Kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4A Motor Fuse: 1A Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP Product Features: 1. Intelligent Control, Control Box Feedback Type Intelligent Control System, Using Imported Components, Precise Control And Lon.
Buy It Now
$1000.00 Shipping Condition: Used Location: Bristol, United States See all pictures for the best description. It’s in great condition! It will be shipped on a pallet by truck via freight. Local pickup is always welcomed, ... moreand we can load. Shipping is just an estimate, so contact me for a quote if interested. Check out my other listings as well. Thank you for looking We have several other lathes, mills, saws, grinders, compressors, and more. See last picture for shipping quote…if interested.
Buy It Now
Condition: Used Location: Canada Sergeant Shrink Tunnel This Sergeant flexible packaging machinery shrink heat tunnel is for sale as is. Machine: Shrink Tunnel Model: 92416-BC Serial ... moreNo:021816 Amps: 13 Volts: 220 Phase: 1 Drive: Motor Speed: Adj. This item is available for local pick up only. If shipping is desired. It will be at buyers expense. We will gladly assist with loading. Payment is required within 48 hours of making purchase.
Buy It Now
Condition: Used Location: Pedricktown, United States Serial# EX104110812. Previously used in sanitary application, bakery. Price and availability are subject to change without notice. All machines are listed ... more"as is". ITEM# MISC-1027.
Buy It Now
$3500.00 Shipping Condition: New Location: China Sleeve labeling machine,with steam tunnel,bottle sleeve labeling machine,with plastic film shrink labeling line. The knife plate is driven by motor machinery. ... moreAlso it has function and durability. Besides this, if the bottle shape is changed from circle to square, it easily can be changed direction for 45°.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Power: 800W. Special Alloy Wedge Knife Supporting High-Power Heating Tube (800W), Heating Faster. Lap Width: 10cm. 10cm, Rubber Wheel 0.2-1.5mm, Automatic ... moreClimbing Welding Machine for Tunnel Waterproof and Drainage Board.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
$5000.00 Shipping Condition: Used Location: Columbia, United States Four-level-pass conveyor belt dryer used to dry hemp-biomass. The drying tunnel is stainless steel with a propane heat source. Dryer Tunnel: 55' L x 6' ... moreW x 7' H.
Buy It Now
Condition: Used Location: Millwood, United States Manufactured by jeff eastey inc. Model et1610-30. S/N 0111610tl. Single phase. Built 8/1997. On casters. 30" W x 38" L x 53" t. Heat chamber opening: ... more18.75" wide x 10" high x 30 long.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Power: 800W. Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP. Special Alloy Wedge Knife Supporting High-Power Heating Tube (800W), Heating Faster. ... moreLap Width: 10cm. 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board.
Buy It Now
Free Shipping Condition: New Location: United States 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board Product Parameters: Lap Width: 10cm Voltage: ... more110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800W Welding Strength: ≥85% Base Material (Tensile Resistance In Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5Kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4A Motor Fuse: 1A Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP Product Features: 1. Intelligent Control, Control Box Feedback Type Intelligent Control System, Using Imported Components, Precise Control And Long Service Life. 2. Imported Silic.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board Product Parameters: Lap Width: 10cm Voltage: ... more110v 50hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800w Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4a Motor Fuse: 1a Scope of Application: Suitable for Pe, Pvc, Hdpe, Eva, Pp Product Features: 1. Intelligent Control, Control Box Feedback Type Intelligent Control System, Using Imported Components, Precise Control and Long Service Life. 2. Imported.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel ... moreWaterproof and Drainage Board Product Parameters: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800W Welding Strength: ≥85% Base Material (Tensile Resistance In Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5Kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4A Motor Fuse: 1A Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: OT-MLLCR-3012-US-1 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board Product Parameters: ... moreLap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800W Welding Strength: ≥85% Base Material (Tensile Resistance In Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5Kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4A Motor Fuse: 1A Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP Product Features: 1. Intelligent Control, Control Box Feedback Type Intelligent Control System, Using Imported Components, Precise Control And Lon.
Buy It Now
Free Shipping Condition: New – Open box Location: Bristol, United States These could be used for a plug and a cap, brush and cap etc. Single head, index filler that can run up to 30 units per minute. After vials/tubes are filled ... moreand capped they can lay flat into the infeed of the labeller where a wrap around label is applied.
Buy It Now
$3500.00 Shipping Condition: New Location: China In case of different and irregular round bottles, square bottles and flat bottles etc, the new-style steam shrinking oven is easy to adjust and maintain. ... moreIt has an even shrinking. The distribution of low-pressure steam drum and spouting way of steam are uniform and designed with seamless tube.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
Condition: Seller refurbished Location: Manteno, United States Feature: Cryogenic Freezing (N2 lowest temperature is -320 degrees F; CO2 lowest temperature is -109 degrees F). REFURBISHED ULTRA FREEZE® TUNNEL- BELT ... moreL. 21' 3". 30" WIDE CONVEYOR BELT, 1 MODULE IN LENGTH, 3 CONVEYOR TIERS, VARIABLE SPEED FANS, NITROGEN OR CO2 Priced for Nitrogen.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
Free Shipping Condition: New Location: United States 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board Product Parameters: Lap Width: 10cm Voltage: ... more110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800W Welding Strength: ≥85% Base Material (Tensile Resistance In Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5Kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4A Motor Fuse: 1A Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP Product Features: 1. Intelligent Control, Control Box Feedback Type Intelligent Control System, Using Imported Components, Precise Control And Long Service Life. 2. Imported Silic.
Buy It Now
Free Shipping Condition: New Location: Chino, United States SKU: OT-MLLCR-3012-US-1 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board Product Parameters: ... moreLap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800W Welding Strength: ≥85% Base Material (Tensile Resistance In Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5Kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4A Motor Fuse: 1A Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP Product Features: 1. Intelligent Control, Control Box Feedback Type Intelligent Control System, Using Imported Components, Precise Control And Lon.
Buy It Now
$3500.00 Shipping Condition: New Location: China The motor load: 20 kg. Model Number DRL. General Purpose.
Buy It Now
Free Shipping Condition: New Location: United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Power: 800W. Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP. Special Alloy Wedge Knife Supporting High-Power Heating Tube (800W), Heating Faster. ... moreLap Width: 10cm. 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel ... moreWaterproof and Drainage Board Product Parameters: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800W Welding Strength: ≥85% Base Material (Tensile Resistance In Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5Kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4A Motor Fuse: 1A Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP. 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and ... moreDrainage Board. Welding Material Thickness: Rubber Wheel 0.2-1.5mm.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Power: 800W. Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP. Special Alloy Wedge Knife Supporting High-Power Heating Tube (800W), Heating Faster. ... more10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board Product Parameters: Lap Width: 10cm Voltage: ... more110v 50hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800w Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4a Motor Fuse: 1a Scope of Application: Suitable for Pe, Pvc, Hdpe, Eva, Pp Product Features: 1. Intelligent Control, Control Box Feedback Type Intelligent Control System, Using Imported Components, Precise Control and Long Service Life. 2. Imported.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
$3500.00 Shipping Condition: New Location: China Sleeve labeling machine,with steam tunnel,bottle sleeve labeling machine,with plastic film shrink labeling line. The knife plate is driven by motor machinery. ... moreAlso it has function and durability. Besides this, if the bottle shape is changed from circle to square, it easily can be changed direction for 45°.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Power: 800W. Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP. Special Alloy Wedge Knife Supporting High-Power Heating Tube (800W), Heating Faster. ... moreLap Width: 10cm. 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board.
Buy It Now
Free Shipping Condition: New Location: United States 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board Product Parameters: Lap Width: 10cm Voltage: ... more110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800W Welding Strength: ≥85% Base Material (Tensile Resistance In Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5Kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4A Motor Fuse: 1A Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP Product Features: 1. Intelligent Control, Control Box Feedback Type Intelligent Control System, Using Imported Components, Precise Control And Long Service Life. 2. Imported Silic.
Buy It Now
Free Shipping Condition: New Location: La Puente, United States Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual 10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel ... moreWaterproof and Drainage Board Product Parameters: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800W Welding Strength: ≥85% Base Material (Tensile Resistance In Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5Kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4A Motor Fuse: 1A Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Power: 800W. Special Alloy Wedge Knife Supporting High-Power Heating Tube (800W), Heating Faster. Lap Width: 10cm. 10cm, Rubber Wheel 0.2-1.5mm, Automatic ... moreClimbing Welding Machine for Tunnel Waterproof and Drainage Board.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Product Parameters: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam ... more12mm Power: 800W Welding Strength: ≥85% Base Material (Tensile Resistance In Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5Kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class Ii Power Fuse: 4A Motor Fuse: 1A Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP Product Features: 1. Intelligent Control, Control Box Feedback Type Intelligent Control System, Using Imported Components, Precise Control And Long Service Life. 2. Imported Silicone Pressure Roller, Good Elasticity, High Temperature Resistance, Suitable For Welding 0.2-1.5mm Materials.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Power: 800w. Scope of Application: Suitable for Pe, Pvc, Hdpe, Eva, Pp. Special Alloy Wedge Knife Supporting High-power Heating Tube (800w), Heating Faster. ... moreLap Width: 10cm. Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
$100.00 Shipping Condition: New Location: China This series of welding machine is small, light, high welding efficiency. Overlap width: 10cm. Seam strength: ≥85% base material (tensile resistant in ... moreshear direction). Welding speed: 0.5˜5m/min. Welding width: 15mm×2, interior cavity 12mm.
Buy It Now
$3500.00 Shipping Condition: New Location: China You only need to press it lightly, the label will detect and locate automatically. The change of label is quick and convenient. To apply to different ... moreand irregular round Bottles, square Bottles and flat Bottles etc, the new-style steam shrinking oven is easy to adjust and maintain.
Buy It Now
$3500.00 Shipping Condition: New Location: China Sleeve labeling machine line for bottle bottom cover machine,with bottom warpping device,with steam tunnel,CE. The knife plate is driven by motor machinery. ... moreAlso it has function and durability. Besides this, if the bottle shape is changed from circle to square, it easily can be changed direction for 45°.
Buy It Now
$100.00 Shipping Condition: New Location: China This series of welding machine is small, light, high welding efficiency. Overlap width: 10cm. Welding speed: 0.5˜5m/min. Welding width: 15mm×2, interior ... morecavity 12mm. Thickness of material: 0.2mm˜1.5mm.
Buy It Now
$3500.00 Shipping Condition: New Location: China You only need to press it lightly, the label will detect and locate automatically. The change of label is quick and convenient. The newly designed cutter ... morehead use step by step motor driving which speed is high, action is exact, the cut is in order and the shrinking is beautiful.
Buy It Now
Free Shipping Condition: New Location: China This series of welding machine is powerful with high welding speed and good welding quality. Overlap width:10cm. Welding width：17mm 2pcs, interior cavity ... more12mm. Welding speed：0.5 - 5m/min. The thickness of welding material：0.2 - 1.5mm.
Buy It Now
Free Shipping Condition: New Location: China This series of welding machine is powerful with high welding speed and good welding quality. Overlap width:10cm. Welding width：17mm 2pcs, interior cavity ... more12mm. Welding speed：0.5 - 5m/min. The thickness of welding material：0.2 - 1.5mm.
Buy It Now
$290.00 Shipping Condition: New Location: China LST-WP1 PVC/TPO roofing hot air welder is designed for roof waterproofing construction. TPO/PVC roofing construction welding machine. Anti-scald protection ... moredesign maximizing heat, and air flow, ensure the welding quality, improve the efficiency of construction.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Scope Of Application: Suitable For PE, PVC, HDPE, EVA, PP. Power: 800W. Special Alloy Wedge Knife Supporting High-Power Heating Tube (800W), Heating Faster. ... more10cm, Rubber Wheel 0.2-1.5mm, Automatic Climbing Welding Machine for Tunnel Waterproof and Drainage Board.
Buy It Now
$226.00 Shipping Condition: New Location: China Model :LST GM1. Weld width: 15mm 2 pieces, cavity 15mm. Welding speed: 0.5-6.0m /min. Welding thickness :0.2-2.0mm (single layer thickness). Frequency: ... more50/60Hz. Lap width: 12cm.
Buy It Now
Free Shipping Condition: New Location: China This series of welding machine is powerful with high welding speed and good welding quality. Overlap width:10cm. Welding width：17mm 2pcs, interior cavity ... more12mm. Welding speed：0.5 - 5m/min. The thickness of welding material：0.2 - 1.5mm.
Buy It Now
$324.90 Shipping Condition: New Location: China Model :LST GM1. Weld width: 15mm 2 pieces, cavity 15mm. Welding thickness :0.2-2.0mm (single layer thickness). Welding speed: 0.5-6.0m /min. Frequency: ... more50/60Hz. Lap width: 12cm.
Buy It Now
$143.99 Shipping Condition: New Location: China It is suitable for welding of PE, HDPE, LDPE, PVC, EVA, ECB, PP, PPR, drainage board, composite film, etc. This series of welding machine has excellent ... moreperformance, increased power, stable climbing, high welding speed, better welding quality, high efficiency and energy saving, simple operation, durable, low price, easy to carry, etc.
Buy It Now
Free Shipping Condition: New Location: Monroe Township, United States Specification: Lap Width: 10cm Voltage: 110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm ... morePower: 800W Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450℃ Insulation Class: Class li Power Fuse: 4A Motor Fuse: 1A Scope of Application: Suitable for PE, PVC, HDPE, EVA, PP Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual.
Buy It Now
$24.90 Shipping Condition: New Location: China Power: 1550w. SCOPE OF APPLICATION: Suitable for Leister series hot air plastic welder gun. HIGH QUALITY: Using high temperature ceramic firing with anti-thermal ... moreshock, high strength, high temperature, and other characteristics.
|
|
|
|
heat shrink tunnel beseler T-15-9
Bestronics(Beseler) heat shrink tunnel model T-15-9 serial# 1072763 electric 220 vac 1ph 50 amp 12 inch wide nomex conveyor belt in perfect condition overall size 48 inch high X 25 inch wide X 80 inch long 400# Unit has new digital temperature control and has been tested. FOR LOCAL PICKUP ONLY.
|
|
|
polaris xcr ultra xcsp arctic cat skidoo rear tunnel heat exchanger
97 ultra rear tunnel heat exchanger. This will fit any sled you want it to by cutting the appropriate hole in the tunnel if your sled was not originally equipped with this style exchanger. Exchanger does by leak but does have some scuffs from rocks or studs. It is still riveted to the sheet metal because quite honestly I hate dealing with drilling rivets out and the cut off wheel was much faster. Remove the rivets and install on your sled. Any questions please ask. Came off a running sled. Flat rate shipping payment within 7 days Posted with
|
|
|
yamaha srx 600/700 tunnel heat exchanger
Left side tunnel heat exchanger for a srx 600/700
|
|
|
Heat Bottle Conveyor Tunnel Stainless Steel
FOR MORE INFORMATION AND SHIPPING QUOTES CALL 973-601-8452 Stainless Steel Clear top(can be opened) 4 Zone Tempering Tunnel Heat Bottle/ Can Conveyor Tunnel 220 Volts 60 Amps Temp. Range: Ambient to 194F(90C) 6'8"L(9'3" total) 2'4"W 3'5"H The item(s) listed are represented to the best of our ability. Item(s) may not contain parts of new condition comparables. Buyer is welcome to inspect sale item(s) prior to bidding/purchase. Once item(s) is purchased. The condition and functionality of the item(s) is no longer the seller’s responsibility. The Seller is not responsible for direct. Indirect, incidental or consequential damages resulting from any defect, error or failure to perform. This equipment is surplus to our manufacturing facility. We are NOT a machinery dealer.
|
|
|
Shanklin Shrink Wrap Machine Conveyor 240V Heat Wrap Tunnel Packaging
Click HERE to go to our ebay Store to see MORE listings! From great companies like Comp Cams. SALEEN, Zex, FAST, Zoom, Mr Gasket. Be Cool and more! Please look at all pictures. As they ARE part of the description. Shanklin Shrink Wrap Machine" 240 Volt with variable conveyor belt speed thru the tunnel. Tunnel measures aprox. 21.5" W X 8.5" H X 41.5" Deep Good USED condition- Removed from our shop to be replaced by a new one. See all pictures below. For local pickup in MEMPHIS TN 38118 Can ship to the lower 48 states for aprox $145.00 Established on ebay since 1999 with Over 22.000 Positive Feedback Transactions! USPS or FedEx is typically used for USA USPS for most International shipments. A tracking number is provided via email for U.S. packages after shipment. PLEASE ALLOW at least 48 Hours after payment is sent to recieve ... moretracking information via email. Business Hours M-F 9-5 CST Closed on weekends. 1-12 Count on Found A Deal! Automotive Industry Liquidation Specialist for over 13 YEARS! Want an easy way to find us again? Click HERE to add us to your"Favorite eBay Stores" ~ Established on eBay in 1999 ~ GENERAL TERMS Please read. Understand, and agree to our terms prior to bidding. By entering a bid on this item, you are agreeing to these terms. If you have questions. Please ask(e-mail) questions before bidding. When e-mailing, please include in the email the item number in question, your ebay user name, and your valid email address. Failure to include this information may delay a response. If emailing from the eBay auction, please do not'block' your email address, this will delay a response. We attempt to answer all questions as fast as possible, but due to the volume of email we receive, please kindly allow up to 48 hours for a response, LONGER on Weekends! Payment is required within 4 days of auction’s end. After payment is received. We attempt to ship all items as fast as possible. We typically ship within 2 business days of payment clearing. Any inaccuracies in shippi
|
|
|
Great Lakes Heat Shrink Tunnel Model MPD 12260
Great Lakes Heat Shrink Tunnel. Model MPD 12260, S/N T0669 with Approximately 20 inch W x 12 inch H Product Opening, 240 V.3 Phase; Contact Matthew Katz 310-457-9055; equipment located in Wilmington. Delaware. $2000 or BEST OFFER.
|
|
|
Shanklin A 22 wraper and heat shrink tunnel
Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807 8727) Contact(845) 807-8727 with any questions Thank you for looking& good luck if you are bidding! pat dolan We have Shanklins. Weldtrons and other wrapping equipment for sale. Shanklin F5-H: Fair condition indoors Shanklin F3-M: Fair condition indoors Shanklin A-2: Parts or rebuild only(stored outdoors) Shanklin short tunne: Indoors but rusty Shanklin long tunnel: Fair condition outdoors Weldtron model 1601: Fair condition indoors Weldtron model 1611: Fair condition indoors Sargent. Besslar, Easty and Weldotron L bar sealers. Thank You pat dolan Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
BELCO Shrink Wrap Tunnel Model ST1608 Packing Sealer L-Bar Heat Seal ST 1608
BELCO Shrink Wrap Tunnel Model ST1608 Packing Sealer L-Bar Heat Seal ST 1608*GREAT DEAL* This unit was working when removed from service In good working condition. It has some scratches ans scuffs. Please see the pictures. Please see the pictures for more details. And ask any question before buying. We are not selling you pictures that we got off the web. We actually have the items in stock. We took pictures for each and every unit including the Serial number and the exact specifications label. when available) to ensure that you are getting what you bid for. Shipping: Please contact us for a shipping quote. We will need the following information to give you a freight shipping quote: Your zipcode. Your location. Is business or residential? Do you have a loading dock or a forklift to unload the unit. Or you will need a truck equipped with a ... morelift gate to deliver it? The unit will be on a pallet measuring 60"x 40"x 65" and weight approx 6 00LBs. Local pick up is free and welcome Shipping is to the 48 mainland USA. No International shipping Sorry! No shipping off shore or to PR. AK or HI. please ask questions before bidding. To ask a question please scroll down to the bottom of the page on the left side and click on the"ask a question" link. We rarely answer questions on weekends and during holidays. We will reply first thing next business day. Check out my! to find more great deals. Return Policy: Unless stated otherwise. You may return product within 7 days of receipt. Product must be returned in the condition it was received with all accompanied accessories and literature including the factory carton. Buyers may return this item if defective. Buyer is responsible for return shipping cost both ways. Please contact us first before returning yo
|
|
|
EASTEY ET1610 HEAT SHRINK WRAP TUNNEL PACKAGING SYSTEM
EASTEY HEAT SHRINK TUNNEL PACKAGING SYSTEM MODEL-ET1610 SERIAL-118TL THIS IS A SHRINK WRAP TUNNEL. THE OPENING IS 16" WIDE AND 10" TALL. UNIT CAME IN PAINTED. BUT IS IN GOOD WORKING CONDITION. THIS IS ONE OF MANY PACKAGING PIECES THAT CAME IN FROM A CLOSED FACILITY.PLEASE SEE MY STORE UNDER"INDUSTRIAL EQUIPMENT" THIS UNIT IS A BUYER TO PAY EXACT FREIGHT AUCTION. THERE IS A $50 PALLET FEE FOR THIS ITEM! ALL emails received after 5pm MST will be answered the next business day. Therefore after 5pm on friday will be answered monday morning. No auctions will close on the weekends, but if you would like an answer about an auction please email us ahead of time.Thanks! Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. Most of the ... moreitems sold on this page are surplus items from government auctions or bankruptcy sales. If the description does not say"New" then you are to assume it is a preowned item. We try to power up every item. But much of the time do not have the means to test items, therefore unless otherwise stated items are sold"as-is" You are welcome to email any questions and if we have the capability to answer we will. We are an ebay business and are committed to excellence in service and fairness, if we are aware of something wrong it will be stated. PAYMENT& SHIPPING Items may be previewed M-F from 10-5 PM MST by appointment only. Items won can also be picked up at our facilities in Denver to save shipping cost. 1. Unless arrangements prior to auction close are made. All items will be shipped FED EX Ground Insured Delivery in the 48 CONTIGUOUS US STATES ONLY(UNLESS WORLDWIDE SHIPPING IS STATED IN AUCTION, THEN IT IS EXACT SHIPPING COSTS) 2. WE RESERVE THE RIGHT TO PULL ANY AUCTION AT ANY TIME! 3. Larger FREIGHT orders(pallets) are to be shipped FREIGHT COLLECT. or unless arrangements are discussed prior to shipping with me) at the expense of the buyer, we will assist in pa
|
|
|
BELCO Shrink Wrap Tunnel Model ST Packing Convection Oven Sealer L-Bar Heat
You are bidding on: BELCO Shrink Tunnel Model: ST Serial no: 4041 240 volts. 1 PH. Temp control needs to be repair or replaced This machine is located in Oxnard. CA 93030 Shipping: Local pick-up. If you want these items to be shipped you must contact us before bidding! Please see picture for additional details. I You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 7.75% sales tax is applied to all orders shipped to California I really appreciate your bids. CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13e05191111-0xf5-
|
|
|
SERGEANT Shrink Heat Tunnel model: 92416-BC
Sergeant Shrink Tunnel This Sergeant flexible packaging machinery shrink heat tunnel is for sale as is. Machine: Shrink Tunnel Model: 92416-BC Serial No:021816 Amps: 13 Volts: 220 Phase: 1 Drive: Motor Speed: Adj. This item is available for local pick up only. If shipping is desired. It will be at buyers expense. We will gladly assist with loading. Payment is required within 48 hours of making purchase.
|
|
|
Heat Tunnel with Adjustable Frame
Heat T u nnel 24” x 6” with Adjustable Frame
|
|
|
X-Rite 706 Shrink Packaging System w/ Heat Tunnel
1-888-9WEC2IT(993-2248) Problem? X-Rite 706 Shrink Packaging System w/ Heat Tunnel. Item Description. Manufacturer X-Rite, Model Number 706, Power 125V 20A, Category Industrial Paper Handling, Cosmetic Wear Item has conveyor belt that is flimsily attached. Conveyor belt in heat tunnel looks worn. Functional Condition We powered the item on. It started warming up as expected. Items Included In Listing X-Rite 706 Shrink Packaging System w/ Manual and 48" x 18" card stock, Additional Comments Approximate dimensions expanded: L=143" W=26" H=47" PJR311. US Postal Code: We do not ship freight internationally PLEASE NOTE: If you think an accessory should be with this item. And it is not pictured or not mentioned, it is NOT included. This Listing Was Sourced By
|
|
|
Tetra Pak Model 6742 Stainless Shrink Heat Tunnel
Tetra Pak Model 6742 Stainless Shrink Heat Tunnel with SS wire belt conveyor Tetra Pak Model# 6742 Powered conveyor with Stainless Mesh Wire Belting Conveyor dimensions 26" wide x 110" Long Single Blower on top of heat tunnel 9" product clearance(can be raised to acomodate up to 12" high product) Curtains on heat tunnel Conveyor elevation- 34" adjustable feet Stainless electrical panel Electrical 460 Volts 3 phase 60 Hz Last used in a small plant to shrink trays in a semi-auto operation For More Information. EMAIL tesales@used-equipment.com or CALL Kevin at(903) 355-1409
|
|
|
2000 EASTEY HEAT SHRINK TUNNEL MDL. ET1610-36
2000 EASTEY HEAT SHRINK TUNNEL MDL. ET 1610-36 S/N 66218TLMB TENOR MDL. TZ4L TEMPERATURE CONTROLLER 15 Packages per Minute(standard size packages) 16" WIDE ROLLER CONVEYOR 48" CONVEYOR LENGTH CHAMBER SIZE = 16" x 10" x 36" MACHINE DIMENSIONS = 24" W X 64" H X 49" L ELECTRICAL = 208/220 VOLTS. 1 PHASE, 40 AMPS WEIGHT = 550 LBS. All items are offered on an as is. Where is basis and all sales are final.
|
|
|
Heat Shrink Tunnel/ lbar sealer combo
Used heat tunnels blow hot air around a package to shrink wrap and make ready for packaging and shipping. Used heat tunnels replace old heat guns. These units are ideal for high volume and industrial shrink wrap needs. Used heat tunnels are made of heavy duty construction. Tunnel Chamber = 16"w x 20"w x 8"h Seal Area= 16"w x 20"l Volts = 110 amps = 20 Phase = 1
|
|
|
ARPAC 60-28T Shrink Wrap Heat Tunnel ONLY
ARPAC 60-28T Shrink Wrap Heat Tunnel ONLY Model# 60-28T Serial# 2673 Two Blowers on heat tunnel Dual zone heat tunnel Temperature Controller Powered conveyor with High Temp plastic belting Allen Bradley PLC Controller Electrical panel with operator interface Blower on Discharge End Standard Safety Features Electrical 460 Volts 3 phase 60 Hz. For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
Mundial Trayless Shrink Bundler Over wrapper case sealer with heat tunnel
This auction is for a Mundial Automatic trayless shrink bundler with lane divider. It was last used at a lemonade facilty doing trayless packs of square bottles. Theres some wires that got disconnected in the control panel so Im selling it as is. We did test the PLC and it still has its memory so it probably just needs someone with some technical experience to trace the wires. I just dont have the time to mess with it and its taking up space in my shop. We can help with freight etc.
|
|
|
Anderson Bros. electric Heat Shrinkwrap Shrink Wrap Tunnel Conveyor Belt 486-1
Anderson Bros. Heat Shrink-wrap. untested by us and we did not see it running before auction purchase. box of extra heat elements comes with it. Model 486-1 Serial 32526 AC Volt 220 Phase 3 Cycle 60 Amp 45 Control Volt 220 Control Diagram Number 4.86(15-G Dimensions: 87"Length x 42"Width x 67"Height Conveyor Opening: 33 1/2"Width x 13" Height Weight: Est. 1000 Lbs Customer pick ups are welcomed. No handling fee charged if picked up by buyer. And we will load your item for you. Items are located at the bright red building located three miles north of Adams-Friendship, Wisconsin, just north of the Hwy 21 and Hwy 13 intersection. For other shipping options or any questions, call Dave Gibson at: 1 608 403 1133 or email Dave your question(s) with Ask a question under Seller info. Store Information: B-1292
|
|
|
PMI Stainless Steel Heat Shrink Tunnel
PMI Stainless Steel Heat Shrink Tunnel Up for Sale is this PMI Stainless Steel Heat Shrink Tunnel that was running great when de-installed in 2012. We are asking only $7.000 for this Heat Shrink Tunnel. Willing to consider Best Offer. Brand: PMI Model: ST.902LR Serial: 02497 Volts: 480+ 115 Ph: 3 Tunnel Dim: 7.25" high x 18" wide Overall Dim: 87" long x 72" high We guarantee item as described and suitability for customer's use not guaranteed. We accept payment through Pay Pal only and expect payment within 7 days of auction end. This item will ship by Freight only and will be weighed prior to shipping. We offer competitive and cost saving Freight quotes due to the large volume of delivieries and shipment at our plant. We would be happy to get you a quote. We ship US bound only and ship within three business days after ... morepayment has been recieved.You may feel free to email any questions or concerns regarding this item.We apreciate your business and will do our best to provide this transaction as smooth as possible. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13e10b331ab-0xf7-
|
|
|
AMERICAN FUJI SEAL 65" ADJUSTABLE HEIGHT HEAT TUNNEL
AMERICAN FUJI SEAL 65" ADJUSTABLE HEIGHT HEAT TUNNEL Click Images to Enlarge AMERICAN FUJI SEAL HEAT TUNNEL WIDTH CAPACITY: 3-3/8" ADJUSTABLE HEIGHT EQUIPPED WITH PHASE FIRE SYSTEM MODEL: CS-6T1-60-48 SERIAL NO: BRM-257-3-4 AMPS: 60 480 LOAD VOLTAGE CONTROL VOLTS: 115/ 12 VDC PHASE: 3/ SP TUNNEL MEASURES: 67" x 34" x 65" CONTROL MEASURES: 32" x 24" x 90" WEIGHT: 1.140 LBS LOADING FEE: $25 COMES AS SHOWN IN PHOTOS WE DO NOT ACCEPT PAYPAL FOR WILL CALL ITEMS. THAT MEANS IF YOUR GOING TO BE PICKING UP THIS ITEM IN PERSON. NO PAYPAL. ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: See item ... moredescription for Shipping Charges. Domestic Carriers are: Shipping Carrier Domestic I will ship to: Customer Service Policy: ITEM WILL BE SHIPPING FEDEX FREIGHT. Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or having a friend pick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. 1MachinerySales.com ABOUT US Our selection includes a wide variety of used and pre-inspected machinery for Woodworking. Metal, Plastic Industry, CNC, Drill, Lathe, Injector, Grinder, Shear Brake, Pneumatic and Hydraulic Press, Compressor, Precision Tool and more such as laboratory tools and medical tools not inspected. We offer used machinery and tools from manufacturers such as Bridgeport. Mitutoyo, Starrett, LeBlond, Kurt, Cleveland and more. To find a greater selection of tools and equipment visit our e page. We are located at: 14911 Don Julian Rd, City of Industry. Calif. 91746, Tel: 626) 330-4647, ALL BUYERS MUST CALL BEFORE PICKING UP ANY ITEM, open at 8am to 3:30pm& Closed from 11am-12pm(lunch) ITEMS OVER $15.000.00 Prior to placing a bid of $15.00
|
|
|
Arpac T-24-16-40 Shrink Wrap Heat Tunnel 460V 3 Phase
Arpac T-24-16-40 Shrink Wrap Heat Tunnel 460V 3 Phase Up for sale we have an Arpac Shrink Wrap Heat Tunnel in working condition. We applied power and tunnel gets hot inside. It comes equipped with a temperature control which displays the tunnel temperature. The tunnel blower is powered by a Reliance Electric 1 hp electric motor. The tunnel size is 24" wide x 16" tall x 40" deep Model T-24-16-40. 460V, 3 Ph, 60 Hz, 30 A. It includes four foot bolts and a tunnel rack. Great offer on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. Shipping Buyer is responsible for shipping charges. The shipping weight is 1018 lbs and the dimensions are 49" L x 4 6" W x 82" H. Unit will be strapped ... moreto a pallet and shipped from Hayward. CA 94545. Local pick up is free and welcomed. We have often surprised our customers with low shipping quotes. Please call me at 408-205-9062 for the best overall price. Payment Policy Payment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, and payment upon pick up. International buyers must pay by PayPal only. Bank wire transfer is also accepted for National and International high dollar sales. CA buyers add 8.75% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never include shipping costs unless stated otherwise in the above description. There will be a 20% restocking fee charged for all refunded items. Check out my other great items now! On Feb-19-13 at 11:03:13 PST. Seller added the following information: Click to view supersized image
|
|
|
Signature Heat Tunnel
This is a Signature Heat Tunnel. Model: 2412S-TM. The serial number is: 97157875. This tunnel is tested and readt to go. It has a fiberglass mesh belt and new heaters. The crating charge is $ 200.00
|
|
|
PACKMATIC AUTOMATIC SHRINK BUNDLER WITH SHANKLIN HEAT TUNNEL
PACKMATIC AUTOMATIC BUNDLER IN GREAT WORKING CONDITION. VIEW VIDEO BELOW. YEAR: 1999 MODEL: 50ASM25 SERIAL: 0796056 POWER: 230VAC CURRENT: 72 kva This is a 90 degree infeed single lane shrink bundler designed for unstable products by utilizing NO TRAYS. PACKS INDIVIDUAL BOTLLES INTO PACKS WITHOUT TRAYS! Siemens PLC controls. Bundles by stacking rows for example for a 6 pack you will set controls to 2 row count with the lane adjusted to 3 bottles wide. Constructed of 11-gauge Stainless Steel and adjustable levelers. Also included is the SHANKLIN HEAT TUNNEL Contact us if you need some more details on this item or if you are in need of other processing equipment. Inspections are welcomed. Item is to be paid in full before shipping. Pay Pal preferred. Company checks and bank wires are also accepted. We can ship internationally if buyer takes ... morecare of Customs paperwork. Be sure to check out our other items! All of our items are available locally. Therefore we reserve the right to cancel an auction at any time that does not have a bid. Please contact us for shipping quote. We deal with several freight brokers to ensure you the best possible rate. Just e-mail us with Zip Code location and whether it is business or residential. Serious Buyers only. Please Ask Questions Before Purchasing or placing an Offer. Thanks. Check out my other listings in my Surplus Equipment and More.
|
|
|
2011 Quadrel SL100 Automatic Sleeving System & Benison ES-200 Heat Shrink Tunnel
Up for sale is a Quadrel SL100 Automatic Sleeving System with 14' Conveyor and Benison ES-200 Heat Tunnel. Machine was designed and made in June 2011 and used for around 9 months in 2012. This machine came to us from Kodak facility in Rochester NY. All the equipment that we bought from there was used to design production line that would produce and package the ink cartridges in China. Never in actual continuuos production. System is in execelnt shape. Hardly any use. You can see manual and specs for this exact unit here. Schematic below. Base price on just the Quadrel sleever is $31.000.00(not including conveyor, or shrink tunnel) This will ship via freight. Please contact me with your zip code to obtain shipping quote. Please note there is no paypal on this item. Equipment is located at our warehouse in Walpole. MA( 25 miles from Boston ... moreor 20 miles from providence RI) You are very welcome to come inspect it and try it out. We will gladly pick you up at the airport and bring you back. This will be shipped via freight FOB and we will provide photos for your approval of the packaging that will be done. Please contact me with your zipcode to get quote. Please do not hesitate to contact me if you have any questions or need additional info. Tel(781) 201-9008 or by clicking"Ask a Question" at the bottom of this page. Powered by 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e29fdd0f9-0xf6-
|
|
|
Marburg MP134 SS Neck Bander Tamper Evident Sleever with NEW SS Heat Tunnel
Marburg MP134 SS Neck Bander Tamper Evident Sleever with NEW SS Heat Tunnel Includes NEW NEVER USED SS Heat Tunnel with SS Conveyor Neck Bander Model#MP134 Last running tamper eveident neck bands on 2" dia. x 4.25" High container with 38mm closure Photo Registration Rated up to 120 p/min; based on product specifications SS construction Product indexing system Powered inline bottle conveyor with speed control Product detection Operator interface controls Neck Bander Electrical 120 Volt/ 50/60 Hz/ 1 Phase NEW Never Used SS Heat Tunnel Model#1538 SS construction SS 60"Long Powered Inline Conveyor with Speed Control Digital Temperature Controller Upper and Lower Heater controls 36" Tunnel Length 8" x 14" Tunnel opening SS adjustable legs Heat Tunnel Electrical 220 Volt/ 50/60 HZ/ 1 phase Excellent Condition! For ... moreMore information Email tesales@used-equipment.com Call Kevin at(903) 355-1409
|
|
|
Hobart/Heatseal 1730LB L Bar Heat Sealer & Model 1734 Turbo Shrink Tunnel
Hobart/Heatseal 1730LB L Bar Heat Sealer& Model 1734 Turbo Shrink Tunnel Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image Click to open supersize image SEALER MFG= HOBART/ HEATSEAL MODEL#=HS-1730SD SERIAL#=FIA7736 ELECTRIC VOLTS=115 AMPS=8.0 HEIGHT=40" WIDTH=56" DEPTH=24 1/2" ITEM WEIGHT= 365 LBS. TUNNEL MFG=HOBART/ HEATSEAL MODEL#=1734T-1 SERIAL#=05-1035021 ELECTRIC PHASE=1 VOLTS= 220 AMPS= 36 HEIGHT=57 5/8" WIDTH=59" DEPTH=26 1/4" ITEM WEIGHT= 550 LBS. You are bidding ... moreon a used L Bar Heat Sealer and Turbo Shrink Tunnel. Which were both manufactured by Hobart/Heatseal. Each unit has been thoroughly tested and cleaned and is in very good condition. The sealer features a 13" wide belt and can accomodate film rolls up to 20" wide. Other features include: Dual adjustable film racks, Heavy duty seal head design, Temperature compensating solid state seal controller, Durable stainless steel construction, Six speed levels, Storage area below. Opening measures 26 1/4" x 20 1/2" Wheels for easy mobility, The tunnel features a 15 3/4" wide conveyor belt and has six different speed levels. It has a user friendly digital temperature control and dual heat chambers. It also features a durable stainless steel exterior and is on wheels for easy mobility. The opening measures 16 7/8" x 8 1/4" A great heat sealer and shrink tunnel for any commercial business location! Buyer pays all shipping and handling(lower 48 states) Tag#OBT124415(tunnel) OBT124312(sealer) SO. If you have questions regarding this item please feel free to contact us toll free 24 hours a day at(800) 386-6190 If you return an item that was sold with FREE SHIPPI
|
|
|
MARBURG Heat Shrink Tunnel Compact For Converyor Comes With Air Lift Unit ,
This is a compact heat tunnel in nice condition. Stainless inside the tunnel is nice and shinny and looks clean inside, heat elements look new and I posted pics of them, The tunnel had a inspected and refurbished note on the tunnel. The tunnel is 240 single phase I pluged in the tunnel to conferm the tunnel is in good working condition. The tunnel is 22 inches long. 11 inches wide and 7 inches high. Tunnel openings are 6 inches wide and 4 inches high on both openings. This also comes with a air lift assembly. The lift unit dose not appear to be refurbished but is in working with all parts shown. Your getting Heat tunnel. Air lift unit, conveyor mount bracket and lift arms. This is being"as is" only to the lower 48 united states. I did put a 100 dollar shipping price this tunnel is very heavy and the unit would ship in 2 packages. ... moreIf your local to me your more than welcome to pick this unit up if your the winner of this auction. I am not in the equipment business this was encluded in a equipment purchase I made. So I don't have to much info on this tunnel, but the picture speak for the tunnel. Feel free to ask any questions.
|
|
|
WELDOTRON 7112 SHRINK WRAP HEAT TUNNEL 16"x8"x36" OPENING
WELDOTRON 7112 SHRINK WRAP HEAT TUNNEL 16” x 8” x 36" Description Information Lot Number Manufacturer WELDOTRON Model 7112 Serial ER12870 Total Power 7KW Tunnel Path Dimensions 36"L x 16"W x 8 H Voltage 220 V- 34 amp- 1 phase Machine Dimensions L 36” x W 20” x H 65” Weight 460 lb Features· Quick Warm-Up Time· Air cooled exterior wall· Heat temperature can be controlled from(0° to 550° F) Conveyor speed control Condition USED. IN EXCELLENT WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $100 charge for Crate(Outside of Shipping& Handling Cost) REFUND We will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the ... moreitem, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of $50.00 +. Freight shipments must be thoroughly inspected prior to accepting delivery. We are not responsible for any damages or shortages once a freight shipment has been signed for. Any damages or missing items must be noted to the freight driver at the time of delivery TERMS OF SALE All items are offered“
|
|
|
HEAT SEAL 20" X 15" SHRINK TUNNEL T-220 SYSTEM 15" X 20" L BAR SEALER HS-1520D
SquareTrade © AP6.0 HEAT SEAL 20" X 15" SHRINK TUNNEL T-220 SYSTEM 15" X 20" L BAR SEALER HS-1520D Prev Stop Play Next You are bidding on a Heat Seal Shrink Tunnel. Model: T-220 System with a L Bar Sealer, Model: HS-1520D. Retail cost of more than $7500 This is a very nice system in superb condition and it is fully guaranteed. Shrink Tunnel: Dimensions: 20" X 15" X 7-1/2" High Temp up to 550 6 Speed Conveyor L Bar Sealer: Provides strong. Consistent seals with all types of centerfolded film. Standard 115-volt power supply with GFI protection 15" by 20" sealing area Temperature compensating solid state seal controller Heavy duty seal head design. Adjustable height wrapping platform, and heavy gauge steel construction. We would be happy to help load on your truck at no charge. Or we can assist ... morein planning the most economical delivery.
|
|
|
Belco Shrink Wrap Heat Tunnel with Powered Conveyor
Belco Shrink Wrap Heat Tunnel with Powered Conveyor Model# CT1608R Serial#7457 Shrink Heat Tunnel 11" Max height clearance Dual Fan 14" x 84" Long Powered Conveyor with speed controller Watlow Series 985 Digital Temperature cotroller 29" Elevation Casters for eaasy mobility Operator controls Electrical 240 Volt/ 60 Hz/ 1 Phase/ 45 Amps Excellent Condition! Just removed from production For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
Weldotron #6402 L Bar Sealer Shrink Wrapper, with Heat Tunnel and Conveyor
Weldotron#6402 L Bar Sealer Shrink Wrapper. With Heat Tunnel and Conveyor L Bar Sealer Model# 6402 Serial#DN63964 L Bar Sealer and Heat Tunnel Seal Bar is 24" wide x 27" Long 30" Long Power belt product discharge 25" Film Roller Carriage 22" x 29" Platform area 36" Elevation Operator controls with Dwell and Seal Control Electrical 220 Volt/ 60 Hz/ 1 Phase/ 24 Amps Weldotron Heat Tunnel is as follows: Model# 7121 Serial# JN65571 Max Package size- 16" wide x 8" High(Length is irrelevant) Heat Tunnel Opning can be opened up to accept larger product sizes Temperature controller 16" W x 72" L powered conveyor with teflon heat temp coated rollers Conveyor speed control 36" Elevation Electrical 230 Volt/ 60 Hz/ 1 Phase/ 35 Amps/ 77 Watts Includes 2 Power Conveyor Sections as follows: 2) ... more16" Wide x 72" Long power conveyors with Teflon heat temp coated rollers 1 Conveyor was used betwen L Bar sealer and Heat Tunnel. 1 Conveyor was used as a product discharge conveyor Just removed from production For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
BESSLER HEAT TUNNEL TD-20-12
BESSLER HEAT TUNNEL MODEL TD-20-12 220 VOLT SINGLE PHASE- UNIT WORKS GREAT SERIAL# 01040090 OVERALL LENGHT OF CONVEYOR 79" BELT WIDTH 19" TUNNEL WIDTH 21" TUNNEL HEIGHT 12" TUNNEL LENGHT 52"
|
|
|
GREAT LAKES MP204060 HEAT SHRINK TUNNEL 1/2 HP/84"/30" 12272
in titles& description Name: GREAT LAKES MP204060 HEAT SHRINK TUNNEL 1/2 HP/84"30" Ticket# 12272, Model: MP204060, Manufacturer: GREAT LAKES CORP. Item located at: Morrisville. PA, Condition: Used, Terms& Condition: As is where is, Selling Price: $1100.00 Description: Volts- 208-230/460 15Hp TEMP RANGE. 310-350, BELT SPEED CHAMBER LENGTH 82" BELT WIDTH IS 30" OPENING 40" X 27" PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION Ticket: 12272 Additional information will be posted as it becomes available. Subject To Prior Sale | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008.
|
|
|
Used Bestronic T30-10 / T-30-10-3PH Uni-Stand Heat Shrink Wrap Tunnel
Used Bestronic T30-10/ T-30-10-3PH Uni-Stand Heat Shrink Wrap Tunnel THIS ITEM IS USED. BUT IN WORKING CONDITION. THE 28" WIDE BELT HAS SOME MINOR TEARS. THE TUNNEL OPENING I.D. IS 30" WIDE X 11" HIGH AND 51" LONG. IF YOU ARE CONCERNED WITH EBAY'S ESTIMATE OF THE SHIPPING COSTS. EMAIL US YOUR ZIP CODE AS WE USUALLY BEAT THE ESTIMATES BY UP TO 50% SEE PICTURES ABOVE AND DETAILS BELOW FOR FURTHER DESCRIPTION AND OPERATING PARAMETERS. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: STYLE: T30-10/ T-30-10-3PH OVERALL DIMENSIONS: WIDTH: 43" LENGTH: 80" HEIGHT: 44" SHIPPING WEIGHT: 950 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR FLEETWOOD(19 522) FACILITY. SHIPPING: WILL SHIP MOTOR FREIGHT TO ALL US. CANADA AND MEXICO. WE ... moreALSO ALLOW LOCAL PICK-UP AT OUR FACILITY; WE DO HAVE FORK TRUCKS TO LOAD. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL UPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT
|
|
|
LEWCO HEAT-PRO DRUM HEATING TUNNEL (2)
Typical applications include melting. Viscosity reduction, elevated temperature storage, and general process heating applications. Cabinets can be installed indoors or out. 2) level, vertical configuration allows efficient use of plant floor space, while the insulated base features an integrated spill containment sump. Please note that electric drum heating cabinets are not suitable for heating flammable or combustible materials needs specs. Have concerns, or any questions at all please let me know right away! these ovens are in great shape chances are if you are in the market for this type of item then you already know all the in and outs. interested at all? then lets work something out. MAKE ME YOUR BEST OFFER! Thanks Posted with
|
|
|
70802006 Used- Shanklin Model T-7XL Single Zone Heat Shrink Tunnel. Tunnel conve
Used- Shanklin Model T-7XL Single Zone Heat Shrink Tunnel. Tunnel conveyor is rated at speeds from 15 to 120 ft per minute. Has temperature controls from 50 to 500 deg. F. Has a 4-8" high(adjustable) X 22" wide X 42" long tunnel passage. Set on 65" long) mesh conveyor. 37 amp. 3/60/230V. ref# 70802006 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-13e8761ded9-0x105-
|
|
|
Heat Seal HS-115/115T Combo Shrink Wrap Packaging Conveyor Tunnel Machine PARTS
Search our eBay Store! Heat Seal HS-115/115T Combo Shrink Wrap Packaging Conveyor Tunnel Machine PARTS SKU: JV-NIC-C-TSASGE Condition: For parts or not working Packaging: Pallet/Skid Warranty: AS-IS FOR PARTS OR REPAIR This auction only comes with what is pictured or listed in the description. All parts. Accessories, cables, etc. are not included unless pictured or described. If in doubt, please contact us before purchasing. Click an Image to Enlarge Heat Seal HS-115/115T Combo Shrink Wrap Packaging Conveyor Tunnel Machine*FOR PARTS OR REPAIR* PLEASE NOTE: THIS SYSTEM DOES NOT APPEAR TO BE COMPLETE. Heat Seal· Model: HS-115. Series: B-2. 115V. 18A. 60Hz. 2kW. MD: 393. Heat Seal Tunnel. Model: HS-115T. Series: C. MD: 393. Physical Condition: Fair/Good; Minor scuffs/scratches. The unit is missing its impulse L-sealer. The units power cable ... moreseems to be pulled out of its base a little(SEE PHOTOS) One of the outlets on the unit has been pushed in a little. The unit has some minor rust spots on it. The Ground Fault Circuit Interrupter has cracks throughout its housing. When the reset button on the Ground Fault Circuit Interrupter is pressed. The conveyor starts moving. The test button is unresponsive. We are uncertain if the heating function works or not. We do not have the necessary resources to further test this unit. Dimensions(L" x W" x H" 84* 19 ½* 48 5/8. BEING SOLD AS-IS FOR PARTS OR REPAIR. Please visit the following link for product information(for informational purposes only) PLEASE NOTE. THE FDA DISCLAIMER BELOW IS FOR MEDICAL DEVICES/EQUIPMENT REQUIRING GOVERNMENT AUTHORIZATION: SVC ASSET MANAGEMENT. INC. MILPITAS. CA 95035(877)757-3863"The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so. Do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item.
|
|
|
Weldotron Shrink Wrap Heat Tunnel model 7222
New Page 5 New Page 3 Untitled Document Weldotron Shrink Wrap Heat Tunnel model 7222 Click image to enlarge. Specifications: Manufacturer: Weldotron Manufacturer p/n: 7222 MECI p/n: 702-2314 Condition: Good. Used Applications: Shrink Wrap Packaging Weldotron heat shrink tunnel 21” wide conveyor 13” maximum height of tunnel opening Heat aeria is 46” long 220VAC. 3-phase, 44 amp electrical 15kW Dimensions: Height:72" Width: 26" Length: 60" This is seen here at a fraction of the original cost. Deals like this won't last long- Hurry and bid now before it's too late! Welcome to our eBay store! To make your purchase as simple and easy as possible. Please refer to the store policies listed below. Payment PayPal- We will ship to the address provided on your PayPal payment only. Credit Cards(Visa. MasterCard, American Express& ... moreDiscover) Please call MECI to make your Credit Card Payment 800-422-3525 ext. 5 830am to 500pm EST Mon-Fri Shipping Cost and Policy Payment to MECI will be for the item cost. Freight charges and the packing fee. Freight charges are based on a few details. We recommend contacting us before you purchase to get a freight estimate. We need to know the following information for estimating freight: 1. Ship to zip code 2. Ship to a business or residence(additional residential fees apply add $70) 3. Liftgate needed at delivery(additional $70) It is always cheaper to pick up the item at a local freight terminal or delivered to a business. There is a $25 handling fee added to this freight order. Freight charges and handling fee charges are separate. After you have used the buy it now option please contact us to add the freight charges and packing fee to your invoice so you only have to make one payment. Once payment is received we will prepare your order for shipment. Contact us by phone at 800-422-3525 ext5 Mon-Fri 830am-500pm EST. CANADA. Freight cost does not include import taxes. Duties or brokerage fees, these charges are the buyer's responsibility. Please check with your c
|
|
|
EQUIPMENT SYS. THRU FEED EXTRUSIION HEAT TUNNEL
EQUIPMENT SYS. THRU FEED EXTRUSIION HEAT TUNNEL EQUIPPED WITH: SERIAL: 3079- 56"L TUNNEL- WATLOW TEMP CONTROL- WGT: PRICE: FOB BROOK PARK. OH- $ 925.00 SUBJECT TO PRIOR SALE BT 7271 FOR ADDITIONAL INFORMATION OR QUESTIONS PLEASE CONTACT DE MAXWELL OR JOHN AT: 216-761-7011 McKean Machinery Sales 5372 W. 130th Brook Park. OH 44142 sales@mckeanmachinery.com
|
|
|
Belco Shrink Wrap Heat Tunnel Md ST 240V 1PH Powered Conveyor PU pick up calif
Belco Shrink Wrap Heat Tunnel Md ST 240V 1PH Powered Conveyor PU pick up calif Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge 213 W# pu pick up in FOUNTAIN VALLEY California 9 2708 Here is a used Belco Shrink Wrap Heat Tunnel. Md ST. Inside the tunnel is about 15" wide by 4" tall and uses 240V, 1PH power. Powered Conveyor. Good for shorter items. On wheels so it is easy to move out of the way. Foot print is about 40" by 30" by 51" tall. Good for a small shop or home. Enlarge the photos for inspection and general idea of what you are getting. pick up in FOUNTAIN VALLEY California 9 2708 The photographs in this listing show everything which is included in the sale. enlarge them ... morefor best view. The photos will tell you the actual condition of the item) If you have any questions or need more information or photos, please ask before you buy or bid. Sold as is, all sales are final. Shipping: we will ship USPS(shipping days are currently Tuesday and Thursday as of 11-11) insurance and tracking are included on all items. And tracking number will be emailed to buyer. Items listed for customer pick-up only cannot be shipped. If this item is offered with Free Shipping. It must be shipped to one of the lower 48 USA states. We will ship USPS Media Rate for books. We ship USPS Air Priority. Insured, for international shipments, and shipments to Alaska and Hawaii. If shipment by common carrier is desired. Arrangements must be made and prepaid by the buyer. If you require an item by a specific date. Inquire before purchasing, please! Large. Heavy or irregular pieces can take longer to ship due to special boxing needs. Heavy things may go FEDEX. Items to be picked up by customer's choice should be paid for in exact cash at time of pick-up. Arranged by appointment. Payment: An invoice will be sent to you soon after the close of the auction. We accept payment via Pay
|
|
|
Clamco Shrink Wrapper/Heat Tunnel
The L-Bar sealer is 2” x 60” and totally separate from the 20” wide tunnel. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ece134176-0x104-
|
|
|
Weldotron Heat Tunnel, Model 7221
220V. 3 phase. 18" conveyor. 68" long. New mesh belt installed since photos were taken.
|
|
|
Weldotron Shrink Wrap Heat Tunnel model Sealing machine
Weldotron Shrink Wrap Heat Tunnel model Great condition. Reason for sale: scaling down. Shipping: From ST-HUBERT(Montreal) Canada. Ship to the US. We make the shipping arrangements(no custom fees no hassles) Specifications: Manufacturer: Weldotron, Manufacturer p/n: 7222, MECI p/n: 702-2314, Condition: Good. Used, Applications: Shrink Wrap Packaging, Weldotron heat shrink tunnel, 21” wide conveyor, 13” maximum height of tunnel opening, Heat aeria is 46” long, 220VAC. 3-phase, 44 amp electrical, 15kW, Dimensions: Height:72" Width: 26" Length: 60"
|
|
|
TPA - 1000 Automatic L Sealer Shrink Wrap Machine and Seal A Tron Heat Tunnel
TPA 1000 Automatic L Sealer and Seal a Tron T2414 Shrink Tunnel TPA is Industry rated as one of the top Automatic L Sealers These machines were used appx 6-7 hrs per week over a 2 year time frame. Hours wise they are practically new. I would like to see both machines together.
|
|
|
HEAT SEAL MODEL HDT-2822/12-LDR SHRINK TUNNEL
FEATURES: HIGH VOLUME SINGLE CHAMBER DESIGN W/VARIABLE AIR VELOCITY CONTROL- 9.000 WATT HEATING ELEMENT- UNIQUE PRE-SHRINK FEATURE ALLOWS FOR 25% MORE BOTTOM SHRINK- QUICK CHANGE LIVE/DEAD ROLLER FEATURE- 1 ½” ROLLER SPACING WITH 5/8” DIAMETER SILICONE COVERED ROLLERS INTERIOR CHAMBER DIMENSIONS: 11" HIGH X 22" WIDE X 28” LONG CONVEYOR SPEED: 0-100 FEET PER MINUTE VOLTAGE: 230 VOLT AC/ SINGLE PHASE/ 42 AMP MACHINE DIMENSIONS: 54” LONG x 38” WIDE x 68” HIGH WEIGHT: 1000 POUNDS
|
|
|
Weldotron 7221 Shrink Wrap System Heat Tunnel
Weldotron 7221 Shrink Wrap System Heat Tunnel The Weldotron 7221 shrink tunnel is constructed of heavy duty structural steel to ensure years of dependable performance in continuous production environments. Weldotron 7221 Shrink Tunnel Features: Heat thermostatically controlled up to 450°F. Plus or minus 1% of full scale. Variable air velocity control. Separate shrink chamber and conveyor. Fully insulated heat chamber. Air-cooled controls for longer life. Double entry and exit curtains for greater efficiency. Minimum heat loss. Adjustable heat pattern. Includes sturdy steel base. Caster-mounted for mobility. Roller conveyor. Shrink Tunnel Specifications: Model: 7221. Serial Number: PA69472. Electrical: 220 Volts. 60 Hz. 3 Phase. 44 Amps. Heater Bank: 15.000 Watts. Shrink Chamber Height: 8" Shrink Chamber Width: 22" Conveyor ... moreType: Teflon Covered Roller. Conveyor Speed: 0-125 FPM. Conveyor Length: 69" Conveyor Width: 20" Similar but not this machine. http:www.youtube.com/watch?v=liBLX4nB6Vo#4384(RJ) 11/3/2011. Chat: We intend to be available for instant chat during normal business hours(CST) for chat regarding items in our store. During the weekends and holidays we will be available if online. Otherwise please send us a communication through eBay and we will answer that ASAP. Questions? We answer all emails within 24 hours or less except holidays which are answered as we have time: Contact Us Feedback: If you feel you have received 5 star services then indicate that in your feedback. If you feel like we could have done better please contact us and let us know your feelings. We can’t fix it if we don’t know know what the problem was. We do the best we can to get it right but with the vast diversion of items we offer things can be overlooked. EBay does not provide access to the details of the seller rating so we only see the numbers and never the logic which could have been improved/resolved with a quick phone call or simple email. Be sure to add us to your favorites list. And check out our ot
|
|
|
Heat Seal HS-115 combination L-sealer and shrink tunnel
Heat Seal Model HS-115 L-sealer and shrink tunnel combination unit. This machine comes equip with a dual magnet hold down. Powered silicon take away conveyor, pin wheel hole perforation, console leg kit and castors. This machine also has the RS-3 digital control panel. This machine is in excellent condition and ready for the production floor. This machine will come with a 30 day Warrany on parts. We will palletize machine and load on truck, but shipping is not included. Please call Rory at 480-363-8782 or email me with any questions.
|
|
|
Weldotron 7141 Heat Shrink Tunnel Used Shrink Wrap
Quality Used Packaging and Processing Equipment for the Food. Chemical, and Pharmaceutical Industries. Weldotron 7141 Shrink Tunnel. This listing is for a used Weldotron model 7141 heat shrink tunnel. Serial#KT43971. Variable speed. Stainless steel wire belt. Unit stands on casters. 60" long heating area with two separate fans; temperature up to 550° F. Overall dimensions are 91" long x 24" wide x 63" high. 220 VAC, single phase, 45 amp power required. Fair condition. Bidding Information. Terms of Sale: All items are offered as"Used-As-Is" This does not mean that the item does not work. It just means that we have not run this item in production ourselves and we don't have the expertise to thoroughly test it. Inspection: Anyone is welcome to come and inspect an item in person during regular business hours ... moreMonday thru Friday 8:00 am to 5:00 pm EST. If you can't come see the item yourself. Then let us know what additional information or photos you need in order to make your decision and we will do our best to get it to you. Further Terms and Conditions of Sale can be viewed below. Shipping: Skidding and Crating: If the item that you are bidding on requires skidding or crating. Then we do this at cost. Contact us for more info. Shipment: We ship items as soon after your payment clears at our bank as is possible. If your item requires special skidding or crating then it may take a few days to prepare. Contact Us: Phone: Call 502-778-3883 during regular business hours to contact Michael Rougeux or Chris Miller for answers to your questions. Fax: 502-778-3787. Hours: 8:00 am to 5:00 pm Monday thru Friday except holidays. Although we do our best to respond quickly. Email and calls made outside those hours will most likely be answered the next day. If one of us is on-line after hours and knows the answers to your questions then we will respond right away. Payment: Payment: We must receive payment within 7 days of auction close. If we do not receive payment within that time then w
|
|
|
C-PAK 3324 Automatic L'Sealer & C-PAK 2218 Heat Tunnel
USED C-PAK 3324 Semi Automatic L'Sealer(220V) The C-Pak Model 320 has sealing bars that are 33" long x 22" wide; adjustable dwell time& seal temperatures; variable speed takeaway conveyor belt to automatically send product to a shrink tunnel after seal is complete& and power unwind film stand. Requires 220 VAC. 20-amp single-phase electrical supply. Push button actuated with pneumatic jaw closure and magnetic dwell hold down. 40-PSI air. Very good condition. It has been serviced and well maintained by qualified technicians during its production lifetime. The Model C-Pak L-sealer uses patented and advanced sealing technology to provide quality seals on both polyolefin and PVC films. The seal cushions are mounted on four air cylinders. When activated. They press the seal cushion into the seal wire on each cycle. The seal ... morecushions are self-aligned with a closed head and give perfect alignment on each cycle. This eliminates the need for manual adjustments. This combination of heat and pressure assures uniform seals and is the heart of the patented Dual Pneumatic Seal System(DPSS™) Shrink films cut, clean, and seal strong with virtually no rejects. Because superior pressure eliminates the need for excess heat, seal wires stay extremely cool. Being cool, they seal fast to give higher production speeds. The Model 320 has a rugged welded chassis as standard. Heavy-duty components are used to provide reliable service under the most demanding multi-shift operations. The action of the sealing head. Seal cycle, and product takeaway conveyor are fully automatic. Safety features are built in to protect the operator. Two buttons must be depressed to begin the auto cycle. Once in operation, a safety switch automatically reverses the downward movement of the head if an obstruction is encountered. This feature can prevent injury to an operator who accidentally places an arm or hand into the path of the head. Another standard feature is the product conveyor, which is self-tracking by means of grooved rollers a
|
|
|
Bestronic BESELER Model T-14-8-D Heat Shrink Wrap Tunnel Conveyor Package Sealer
Bestronic Beseler Model T-14-8-D Mini Heat Shrink Tunnel Model# T14-8 Serial# 985817 Used by Home Crafter in immaculate shop/setting. I have inspected it and it works perfectly. Owner wants to sell since no longer needed. This is the tunnel only. does not include sealer. Email/Call with any questions or to set an appointment for viewing as this unit is offsite at the original shop. Sold AS IS. I can make a video for serious buyers to verify working condition and quality. Clean inside and out Works perfectly Heats quickly All controls in good working order Belt in excellent shape Single phase. 115 volt, 25 amp Size 14”W x 23”H x 33L x 20”D Please email for freight charges. Serious inquiries only on freight as it would have to be calculated offsite which may take a couple of days. I could also send you a video if interested. Terms and Conditions ... moreItem is sold as is. Where is with no warranty, implied or expressed. Returns and exchanges are not accepted. All sales are final. Some items may require additional service and or parts to reach OEM’s specifications. Payment via PayPal is due in 7 days. Item being sold is previously owned and is expected to show some wear. Terms and Conditions Shipping is by pick up or by arranged shipping. Shipping may be arranged by you or seller for your convenience. Contact seller prior to purchase to arrange. Shipping is in addition to purchase price if provided by seller.
|
|
|
Great Lakes Heat Shrinking System Heat Shrink Tunnel
For detailed pictures, please scroll to the bottom of the page DESCRIPTION Great Lakes Heat Shrink Tunnel_ This item was recently removed from a professional facility. Where it was working before removal, but unfortunately I do not have the equipment or the ability to test the unit therefore is being SOLD AS IS. Cosmetically. It is in good condition with some usage ware. Feed belt is 28" Wide Motor: H/P: 1. Phase: 3, RPM: 109 Dimensions: 84" x 78" x 55" No manual or any other accessories included. SOLD AS PICTURED_ Shipping: Due to the size and weight of the unit. We are offering LOCAL PICK UP or FREIGHT SHIPPING ~ Please contact us via email for a freight shipping quote or to arrange local pick up ~ Salesbaron is in Los Angeles. 90039 AT-LCW(2000/L) PAYMENTS We accept PayPal and all major credit cards. Please contact ... moreus for direct credit card payments. Note: There will be an 8.75% sales tax to buyers in California. SHIPPING Packages are usually shipped within 5-Days of payment receipt(excluding Saturday/Sunday) All orders are shipped via FedEx and USPS. International buyers. Please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the sellers discretion. If you purchase more than one item from us. They may arrive in separate packages. RETURNS We list and photograph every item we sell so you can feel confident when bidding. We only accept returns under certain circumstances with in 14 days of delivery. Shipping costs are non-refundable. CONTACT US Monday- Friday: 9am to 6pm PST Saturday: 9am to 2pm PST Address: 4587 Brazil Street Los Angeles. CA 90039 Telephone: 818-241-2265 ABOUT US Sales Baron is one of the fastest growing eBay
|
|
|
PREFERRED PACKAGING L-BAR SEALER WITH SHRINK HEAT TUNNEL
PREFERRED PACKAGING L-BAR SEALER WITH SHRINK HEAT TUNNEL Description Information Lot Number SEA-2038 Manufacturer Preferred Packaging Model Sealer: PP1622E Heat Tunnel: PP180828 Serial Heat Tunnel: A18307 Seal Area 16" long x 22" wide Speed 15 to 20 ppm Tunnel Area 36” L x 18” W x 9” H rated up to 30 fpm Electrical 220Volts/ 1 Phase/ 60 Hz/ 40 Amps. Type of Stand heavy duty frame with casters Dimensions L 65” x W 26” x H 70” Weight 400 lb Features Condition USED. IN EXCELLENT WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $100 charge for Crate(Outside of Shipping& Handling Cost) REFUND We will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid ... morefor the item, excluding any charges for shipping, crating or insurance. PAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of $50.00 +. Freight shipments must be thoroughly inspected prior to accepting delivery. We are not responsible for any damages or shortages once a freight shipment has been signed for. Any damages or missing items must be noted to the freight driver at the time of delivery TERMS OF SALE All items are
|
|
|
Heat Shrink Tunnel and L-Bar Sealer (Stevenson 1700A System)
You are bidding on a Steven Industries Model 1700A Seal'N Shrink System. The sealer has been lightly used. Works like new and is in excellent condition as you can see from the pictures. The Steven Industries website has excellent instructional information plus technical assistance and renewal parts are available if ever needed. For complete specs and features on this system. Visit Stevenson Industries website. These sell new for $2295.00 Shipping weight is If you need additional pictures or have any questions. Send a note and we'll get back to you asap. Thanks for looking! Seal N' Shrink System Contains: Seal N' Shrink"L" Bar Sealer, Shrink Tunnel, Shrink Film Dispenser, Power Cord, Maximum Package Size: 17" x 13" x 5" Seal'N Shrink features: Smoke-Free impulse sealing with self-compensation assures ... morestrong. Tough seals with all films. Unique energy saving. Convection shrink tunnel outperforms old fashion 220 volt bulky tunnels. Runs on 110 volts for immediate use. No costly 220 volt wiring required! Designed for easy. Do-It-Yourself servicing. Plus friendly technical assistance always available.
|
|
|
SIGNATURE PACKAGING MACHINERY HEAT SHRINK TUNNEL
Used Signature Packing Machine. This item was in use prior to removal. Model No. 2412STR 208-240V Feel free to ask any questions.Thanks The Removal Deadline for this auction is Monday June 17. 2013. Please note: this item is offered for sale via other venues outside of eBay on a“first come first served” basis because of our extremely competitive pricing our inventory usually moves VERY fast and we reserve the right to end this auction early. Therefore, if you are interested we encourage you to bid early, or open a line of communication with us to establish your interest. At AP Liquidations. We purchase and resell a variety of application specific equipment and machinery, which can be used, brand new, or surplus inventory. Warranty and Condition of items sold are“AS IS WHERE IS” With no warranty. Descriptions are believed to be correct but ... moreare not guaranteed. AP Liquidations will describe if the item has been tested and is in proper working condition. This description does NOT warranty the item. We do our best to answer any questions and provide as much information as possible; however we may be limited in knowledge due to the wide range of equipment we offer. No claims are made as to working condition. This is auction inventory and therefore sold"AS-IS" The Bidder by placing any bid on this auction agrees to the all the terms and conditions of the auction. Please Be Advised… This item requires freight shipping plus a palleting fee up to $150(depending on size of item) This includes strapping it to a skid and wrapping with stretchwrap as well as cardboard and bubblewrap if it needs it. If you intend to bid on this item please inquire about the shipping costs prior to close of auction. We will ask for your Zip and a description of your delivery location. If not being shipped to a business address. To save on shipping, shipments can be picked up at a freight terminal for the same price as a business shipment w/ dock. If the shipment needs to be brought inside by the carrier(not including loading dock)
|
|
|
Texwrap T-822 Single Chamber Heat Tunnel Shrink wrap 822
Texwrap’s line of single-chamber forced air convection tunnels are designed to give outstanding shrink results on lower speed applications. Generally paired with an L-sealer or intermittent motion wrapper. This type of tunnel uses large volumes of high velocity air to impart the necessary energy to the film for the best shrink package. Texwrap’s standard line of forced air tunnels have proven over years of use to be capable of producing excellent results with most packages. Digital temperature controls. High velocity fans, individual top and bottom controls for air direction, and variable speed conveyors all contribute to the precise control of the process to put the right amount of heat of the right places over the correct amount of time to produce outstanding shrink results. Continuous duty industrial grade blower motor Air velocity control ... moreTop air velocity control for the adjustment of air flow to the top or bottom of the package for even shrink Durable powder coat finish Selectable on/off and P.I.D. control with auto tuning of proportional band Tamper proof setting. Faulty sensor compensation and controller diagnostics Easy to read L.E.D. display Well insulated energy efficient design DC motor with variable speed control for conveyor speed Audible high heat alarm and high heat limit thermostat Stainless steel mesh belt standard Model T822M Opening 8"H x 22"W Electrical 230V. 3 phase, 34 amps Heaters 3 flange cal-rod types Conveyor Height Adj. 30" 35"H Conveyor Speed 0-150 feet per minute Machine Dimensions 112"L x 46"W x 74-79"H Shipping Weight 1150 lbs Conveyor Width 15" Chamber Length 64" Normal 0 false false false EN-US X-NONE X-NONE Terms and Conditions. Buyer must inspect prior to purchase or purchase as is. Buyer is responsible for all shipping expenses. Items will be shipped upon clearance of funds. The seller makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the uni
|
|
|
Axon dual chamber heat tunnel EZ48 SRBW EZ 48
Axon's heat shrink tunnels are designed to work with both tamper evident bands and sleeve labels. Axon produces convective. Radiant, and steam heat shrink tunnels that offer optimum shrink performance for a wide range of standard product sizes while using minimum space. Features of the EZ-48-SRB State of the art temperature controller. Stainless steel construction. Optional automatic lift. Application: Sleeves/ Bands Max Bottles: 5" x 7" Type: Recirculating/ Dual Zone Beverage Dairy Chemical/Industrial Consumer Products Food Produce Health& Beauty Aids Household Goods Nutriceuticals Pharmaceutical Terms and Conditions. Buyer must inspect prior to purchase or purchase as is. Buyer is responsible for all shipping expenses. Items will be shipped upon clearance of funds. The seller makes no representation of any item sold to ... morebe fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment purchased. The purchaser. By purchasing this equipment, indicates their acknowledgement of and agreement to the terms of this disclaimer. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Shanklin T-7XL Heat Tunnel, Shrink Wrap Tunnel 14939
in titles& description Name: Shanklin T-7XL Heat Tunnel. Shrink Wrap Tunnel, Ticket# 14939, Model: T7XL, Manufacturer: SHANKLIN, Item located at: Morrisville. PA, Serial# T87176, Condition: Used, Terms& Condition: As is where is, Selling Price: $2250.00 Description: Variable Speed Conveyor from 15 to 120 ft/min Chamber size: 8" high x 22" wide x 42" long 3/4 hp blower Variable temperature range from 50 to 500 deg F 480 V Ticket: 14939 Additional information will be posted as it becomes available. PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION Subject To Prior Sale | | Copyright 1990 to 2013 A&A Machinery Moving. Inc. and A&A Machinery Sales, Inc. All Rights Reserved by netStride. A&A Machinery Moving Inc A&A Machinery Sales Inc 201 Dean Sievers Place Morrisville PA 19067 215-428-1100• Fax: 215-428-9008. ... morePACKAGING. SKIDDING, CRATING AND LOADING COULD BE AN ADDITIONAL CHARGE DEPENDING ON THE NATURE OF THE ITEM AND WHAT'S REQUIRED FOR SHIPPING. PLEASE CONTACT US AND LET US KNOW HOW YOU NEED IT PREPARED. THANK YOU.
|
|
|
X-RITE MODEL 706 L-BAR SEALER WITH SHRINK HEAT TUNNEL
X-RITE L-BAR SEALER WITH SHRINK HEAT TUNNEL Description Information Lot Number SEA-2051 Manufacturer X-Rite Model 706 Serial 002519 Seal Area 16" long x 18" wide Speed 15 to 20 ppm Tunnel Area 27” L x 14” W x 12” H rated up to 30 fpm Electrical 110Volts/ 1 Phase/ 60 Hz/ 18 Amps. Type of Stand heavy duty frame with casters Dimensions L 65” x W 26” x H 70” Weight 400 lb Features Condition USED. IN EXCELLENT WORKING CONDITION Location Miami. FL USA Unit is removed and ready to ship. $100 charge for Crate(Outside of Shipping& Handling Cost) REFUND We will refund any item returned within 14 days of our shipment. Provided it is returned in the same condition it was shipped. Buyer is responsible for all shipping costs. Our refund is limited to the amount you paid for the item, excluding any charges for shipping, crating or insurance. ... morePAYMENT PAYMENT: We accept pay pal wire transfers. Cashier’s checks, visa, master card, discover and American express as forms of payment( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped or ready for pick up. If paid by check, wait for check to clear my bank. SHIPPING SHIPPING FEES: Out of country buyers to handle paper work and shipping. Please have your freight company fax us a completed prepaid"bill of laden" and all necessary paperwork to the number below. All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage on day all, 30-day max. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. Skidding fees range from a minimum of $50.00 +. Freight shipments must be thoroughly inspected prior to accepting delivery. We are not responsible for any damages or shortages once a freight shipment has been signed for. Any damages or missing items must be noted to the freight driver at the time of delivery TERMS OF SALE All items are offered“Used-As-Is” This does not mean that the item does not work; it j
|
|
|
HOBART L BAR SEALER AND HEAT TUNNEL 1734T-1 1730 LB-1 HEAT SEAL PACKAGING
HEAT SEALER AND TUNNEL L BAR HEAT SEALER: MADE BY: HOBART MODEL NUMBER: 1730 LB-1 17" X 30" SEALING AREA AND 20" FILM STAINLESS STEEL STANDARD 115V POWER SUPPLY 57 1/2" LENGTH 24" WIDTH 40" HEIGHT 8 AMPS 60 HZ HEAT TUNNEL: MADE BY: HOBART MODEL NUMBER: 1734T-1 220V 40 AMPS 59" LENGTH 57 1/2" HEIGHT 26 1/2" WIDTH 17" OPENING USED. SOLD AS IS BUYER PAYS FOR ALL SHIPPING CHARGES. WE. WILL STRAP THE ITEM TO THE SKID. SELLER DOES HAVE THE ABILITY TO HELP WITH SHIPPING IF BUYER NEEDS ASSISTANCE.
|
|
|
Digital Heat Press PRINTA 550 Pro 16” x 16” Tunnel style
For dye sublimation image heat transfer. Adjustable temperature tunnel press completes up to 40 prints per hour. Digital controls. With foam pad and silicone shield. $2.500 new. Safe, durable, and economic Uniform heating system Electronic constant temperature control Accuracy ±5 F Electronic time control: precise time set-up Pressure adjustable 16" x 16" Flat even heating area Full range loading pressure adjustment. Constructed with steel frame. Adjustable timer Power Switch, high current circuit breaker Press Temp: 00-500°F(+/ 5 degree) Silicon rubber base included Extra thick heat plate provides even temperature and higher pressure Easy to operate Power on/off indicator switch. Input Voltage: 110V ~ 120V for regular outlet
|
|
|
Great Lakes Corporation Heat Shrink Tunnel Wrapping Machine Food Processing
Great Lakes Corporation Heat Shrink Tunnel Item for sale is one(1) used heat shrink tunnel by Great Lakes Corporation. Model#MPD122260. Belt measures 20" x 12" 240 volt, phase 3, 60 hertz, 55 amp, 21, KW, SN#T0814, 1/2 HP Motor, F.P. 75x32x74. 052813BTTrailer We accept payment through paypal. But we are also open to other forms of payment. We can accept credit cards through our physical business, allow cash payments on pickup and will accepts your checks if you would like( item held from shipment until payment clears) Please contact use if you would like to pay by another way and we will do our best to work with you. We ship as quickly as we can. We often reuse old boxes that are still in good shape to help save trees. Please be considerate of this if you get a box that is old. The faster you pay the quicker we can ship. We use ... morecaculated shipping using a stadardized shipping for. We do send items the quickest way that is payable by your shipping fees, we often upgrade to priority service on orders because the price is close to slower services. If there is a difference in cost we will pick this up for you. Be sure to read all terms in the listing. Surplus Equipment Supply. Hartsville(MAIN) Office: 122 Rogers St. Suite 3. Hartsville.Tn.37074 Hartsville Office:615) 374-9738 BUYERS& SELLERS OF GOOD USED EQUIPMENT $$$$ ACTIVELY BUYING YOUR SURPLUS/BONE YARD EQUIPMENT $$$$. I try to be as accurate as possible. But I am not familiar with every piece of equipment that I sell. I also have several people listing items that do not know anything about the items, so, please take time to look at all the photos, because what you see is what you get. We buy Truckloads of equipment at a time and sometimes do not have time to check all the machines out to see if they work or not. You are buying just like I am. And you must remember that you are buying a lot cheaper than the other guys are selling. If I have checked the machine out, I will list it as Working or Not Working. The majority of our items are as is and unte
|
|
|
Sergeant Shrink WrapMachine and Heat Tunnel - No Reserve!!
For sale is a used Sergeant automatic shrink wrap machine and matching heat tunnel. Heat tunnel is 220v. Shrink wrap is 110v. Its been in storage for 5 years and is untested. Looks like it is in good shape. Email with questions.
|
|
|
EASTEY Model ET2012 Heat Shrink Tunnel 20" x 12"
Great working condition.
|
|
|
SIGNATURE SHRINK WRAP AND HEAT TUNNEL WITH PORTABLE CONVEYOR
1996 SIGNATURE SHRINK WRAP/HEAT TUNNEL WITH FOLDING CONVEYOR 220 3 PHASE POWER BUYER RESPONSIBLE FOR ALL FREIGHT CHARGES WILL SKID FOR FREE WILL LOAD FOR FREE
|
|
|
Aline Shrink Wrapper/Heat Tunnel
See it In Action Here: https:www.youtube.com/watch?v=A1fkxLkR1oc https:www.youtube.com/watch?v=sqZtvbqdZog https:www.youtube.com/watch?v=BEZw-nqjAfw 30” wide by 50” long unit that we purchased new 12 years ago or so from“Aline” It was about $12k then and I have a new quote for it as of 2012: It is a unitized unit which means the“L-Bar” sealer and the Shrink Tunnel are combined into one frame that cannot be separated. The“ALINE” brand is the cheapest on the market but has worked for us with some modifications over the years. k5n.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rkpg%7C%3Ek5n-13f183cd2b8-0xf5-
|
|
|
Weldotron Compact Shrink Heat Tunnel Model 7112A Packing Machine
You are bidding on: Normal 0 false false false EN-US X-NONE X-NONE Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Weldotron Compact Shrink Heat Tunnel Model 7112A Packing Machine. Please see picture for additional details. I guarantee my sales. If I have missed something or the item is not as I described. Let me know within 5 days after you receive it and send it back to me in the same condition you received it for a full refund, less shipping. You can contact me at phone: 818) 441- 8941 if you have any questions. Sales Tax: A 8.00% sales tax is applied to all orders shipped to California I really appreciate your bids. Normal 0 false false false MicrosoftInternetExplorer4 CLICK HERE TO SEE OUR OTHER GREAT AUCTIONS
|
|
|
Weldotron Heat Shrink Tunnel Conveyor Packaging Wrap Machine
I don't know alot of info on this piece. Feel free to call or email with questions. And I will try and get you some info 931-433-1939
|
|
|
Weldotron Heat Shrink Tunnel Bucilla 040275
This was working when I bought it and removed from plant. I never ended up using it as customer changed packaging requirements in the intrim. It is 220V 3-phase. The opening of the tunnel is 6 inches high and 22 inches wide. The tunnel is 42 inches long. The buyer will be responsible for all cost and arrangements for shipping. Local pick up is welcome. We will have it on a pallet and ready for shipping. We can load with a fork truck. Feel free to ask any questions or make an offer.
|
|
|
SHANKLIN T6 HEAT TUNNEL PACKAGING EQUIPMENT USED VERY CLEAN MACHINE HD
ON SALE NOW. PRICE REDUCED BUY IT NOW FOR $1675 APPROX. 2007 SHANKLIN T-6 HEAT TUNNEL VERY CLEAN FULLY OPERATIONAL AND READY TO WORK UNITS WORK GREAT FOR PACKAGING A VARIETY OF ITEMS SEE ALL PICTURES FOR DETAILS 230 VOLT. SINGLE PHASE THIS UNIT JUST CAME OUT OF PRODUCTION FROM A FACILITY THAT CLOSED SEE MFG. PRODUCT SPECS FOR DETAILS ON LINE This is a great inexpensive piece of packaging equipment and it sells in as is where is condition. As shown. Unit has average wear for used equipment. Sells in as shown condition. we suggest a safety check, basic maintenance etc. prior to use for all of our equipment. Sells as is, non returnable.Buyer assumes all liability for use and operational instruction.All freight charges including returns is the responsibility of the buyer.Sells in accordance with our sales agreement/invoice. Buy on Ebay and save ... moreBIG $$$ compared to over $20,000 new.Buyer can arrange their own freight.This can be shipped anywhere via truck from our Syracuse, N.Y. warehouse. Email your zip code, city and state for a frieght quote. Call me(Dave) at(315) 247-3731 if you have any questions. Serious bidders only please, payment due within three days of auction ending.Payment via certified funds, bank check, money order or bank wire transfer only. No paypal or credit cards.FREIGHT IS THE RESPONSIBILITY OF THE BUYER. WE HAVE GREAT RATES SO CALL OR EMAIL WITH YOUR ZIP CODE, CITY AND STATE FOR A FREIGHT QUOTE. TERMS OF SALE: PLEASE READ PRIOR TO BIDDING CALL(315) 247-3731 IF YOU HAVE ANY QUESTIONS Payment: Payment arrangements must be made within 48 hours after auction ends. Payment within 3-5 Business Days is required. Bank Check. Cashier’s check, and wire transfer are the methods of payment. We do not accept PayPal or Credit Cards for heavy equipment purchases. All funds must clear before machine leaves our warehouse. New York State Sales Tax applies to ALL local pickup and deliveries made within New York State. Our Contact Info: CNY Rack& Surplus. Office: 315) 432-0565, Fax: 315) 432-0959 C
|
|
|
40347002 Used- Heat Tunnel, stainless steel. 16" wide x 10-1/2" high x 24" long
Used- Heat Tunnel. Stainless steel. 16" wide x 10-1/2" high x 24" long heat zone. Chain link conveyor, 220 volt. Mounted on casters. ref# 40347002 Steven Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville. Il. 60106 Phone: 630-350-3021 Fax: 630-350-0780
|
|
|
Heat Seal 540 Space Saving Shrink Wrap Heat Tunnel Packaging Machine
Heat Seal 540 Space Saving Shrink Wrap Heat Tunnel Packaging Machine THIS MACHINE IS USED. THERE IS DIRT. SCRATCHES, AND OTHER VARIOUS COSMETIC DAMAGE TO THIS MACHINE. WHEN PLUGGED IN THE MACHINE DID NOT TURN ON. PLEASE EMAIL WITH QUESTIONS OR CALL US AT 610-944-8621. THANKS FOR LOOKING. FOR THOUSANDS OF OTHER INDUSTRIAL ITEMS. ITEM DETAILS: MODEL# 540 OVERALL DIMENSIONS: WIDTH: 22" LENGTH: 36" HEIGHT: 26" SHIPPING WEIGHT: 100 LBS OTHER DETAILS: THIS ITEM IS LOCATED AT OUR BLANDON(19522) FACILITY. SHIPPING: WILL SHIP UPS GROUND TO ALL UNITED STATES; WILL SHIP WORLDWIDE VIA USPS. WE ALSO ALLOW LOCAL PICK UP AT OUR FACILITY. THE BUYER IS RESPONSIBLE FOR ALL SHIPPING& HANDLING COSTS. SHIPPING COSTS ARE DETERMINED BY THE LOCATION OF THE BUYER AND THE WEIGHT OF THE ITEM SOLD. THERE IS A $10.00 HANDLING CHARGE FOR ALL INTERNATIONAL ... moreUPS AND USPS PACKAGES AND $50.00 FOR ALL FREIGHT SHIPMENTS. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: PLEASE PROVIDE A PHONE NUMBER AND SHIPPING ADDRESS SO WE CAN GET THE ITEM SHIPPED TO YOU. DO NOT FORGET ABOUT ANY OTHER CHARGES WHICH ARE CHARGED BY THE CARRIER. THIS IS SOMETHING WE HAVE NO CONTROL OVER AND IS AN ADDITIONAL CHARGE TO SHIPPING. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOESN'T WORK AT ALL UNLESS IT WAS LISTED AS BEING"PARTS ONLY" OR"NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. ONCE THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE THE REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS. CREDIT CARDS(VISA/ MASTER CARD/ AMERICAN EXPRESS/ DISCOVER) AND CASHIER'S CHECKS. PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY T
|
|
|
X-Rite 706 Shrink Wrap Sealer and Heat Tunnel - Digital Control Print Shop Eqpt
X-Rite 706 Shrink Wrap Sealer and Heat Tunnel- Digital Control 12 x 18 Check out all the photos and look at my other items. There is an entire print shop up for sale. All equipment works great and is very clean. Large machinery will not be shipped- pickup in Indianapolis. IN. Posted with
|
|
|
SERGEANT 92416-BC Heat Shrink Tunnel 136659 Pull Working Environment Packaging
Hot Sale! Limited time only You are bidding on a. SERGEANT 92416-BC Heat Shrink Tunnel 16" X 24" X 9" Good condition-pulled from working environment Item Name 16" X 24" X 9" SERGEANT 92416-BC Heat Shrink Tunnel-N/A, Model Number 92416-BC, Serial Number 32960, This is the one you are bidding on. You may find additional ornaments at my store! Love it! Arrived safely and timely. Thanks for free shipping. GREEAT ORNAMENT! FAST SHIPPING! Brighten up the this day with this beautiful Item! Order yours today! BY Bid to Win! Need more see my Established in 1984. Mark Roberts was founded to bring to life all the characters that, as a little boy, Mark’s mother used to tell him about but he was unable to physically see. For over 25 years his business has grown into one of the largest and most renowned collectibles company ... morein the nation and the world, with collectors in every state and over 20 countries. Mark Roberts’s creations are sold at retailers ranging from local high-end boutiques to more prestigious iconic stores such as Nordstrom, Saks Fifth Avenue, Gumps by Mail, Bloomingdales and Macy’s. Mark has created over 500 unique designs for his Fairy. Elf and Santa collections. Each is a limited edition piece. Earlier designs have been retired from production and are difficult to find. His perennially popular, the“ is set to retire in December 2010 with complete retirement in 2011. This collection features a specially designed Fairy for each of the 12 days of Christmas. Mark Roberts is also known for his upscale line of and home décor. This includes exquisite designs for lamps. Picture frames, candleholders, urns, ornate boxes, bookends, clocks, and soft goods. offers a selection of classic accessories in a mixture of mediums. Adding a touch of whimsy to each item. Feel free to email me with any questions. Want some old Christmas Songs: I Want a Hippopotamus For Christmas- writing credits go to John Rox. Copyright 1950. It's included on a tape by"Joanie Bartel's Christmas Magi
|
|
|
WELDOTRON 7112 HEAT SHRINK TUNNEL 16" X 26" X 8"
Please read all details below. Here is a quick summary: Item has not been tested. Condition is unknown. We do not have the ability to test anything, we do offer a 30 day return from date of invoice. Questions: quickest response by email through listing(link at bottom left of listing labeled"Ask a Question" We can ship the item. I can provide quotes to domestic USA and Canada. We do combine shipments. We charge a non-refundable Handling fee. See details below, varies from $4.99 for UPS/USPS to $19.99- $50 for freight items. We are located at 20001 Euclid Ave. Euclid, Ohio 44117- just outside of Cleveland, Ohio Payments: we prefer paypal. Also accept Visa, MasterCard, and Discover. Storage Fee's/Abandonment: after 45 days from purchase date we charge $20 per day storage. Beyond 90 days it is considered abandoned, no refunds given. ... moreItems are being sold as pictured; we will not sell pieces/parts unless the whole item is purchased. Please see below for full listing details: Inventory Number: 05131340002 Manufacturer: WELDOTRON Description: WELDOTRON 7112 HEAT SHRINK TUNNEL 16" X 26" X 8" Capacity: 16" X 26" X 8" Model Number: 7112 Serial Number: CQ80270 Additional Information: BEFORE PURCHASING. PLEASE READ ALL TERMS: Item is being listed as USED. This item has not been tested, condition is unknown; item is being sold“AS IS” Any conditional notes will be listed in the additional information. IF FOR ANY REASON YOU ARE NOT SATISFIED WITH YOUR PURCHASE. PLEASE RETURN IT WITHIN 30 DAYS OF THE DATE OF THE ORDER, FREIGHT PRE-PAID, FOR A FULL REFUND. We are open to the public. Bidders are encouraged to inspect prior to purchase. Item is subject to prior sale* This item is located in our 12 acre indoor showroom at: HGR INDUSTRIAL SURPLUS EBAY DEPARTMENT- JON FRISCHKORN 20001 EUCLID AVE EUCLID. OH 44117 440-476-0505 MONDAY– FRIDAY 8 AM– 4 PM(EST) excluding holidays) QUESTIONS: Our store hours are Monday-Friday 8am-4pm EST. For quickest responses. Please email directly through our eBa
|
|
|
Q VAC SHRINK WRAP MACHINE WITH HEAT TUNNEL
THIS IS A SMALL SHRINK WRAP MACHINE THAT HAS AN L-BAR AND HEAT TUNNEL. WE OBTAINED THIS THROUGH A COMPANY BUYOUT SO WE KNOW LITTLE ABOUT IT. IT WAS WORKING WHEN WE PULLED IT OUT OF THE OTHER COMPANY. HOWEVER THIS ITEM IS BEING SOLD AS IS! IT HAS A SMALL FOOT PRINT. THE SIZE IS 28" WIDE BY 84" LONG BY 55" TALL. WE WILL PALLETIZE ITEM FOR SHIPPING AT NO EXTRA COST. BUYER PAYS ALL SHIPPING COSTS! PLEASE CONTACT ME IF YOU HAVE ANY QUESTIONS. THANKS!
|
|
|
Heat Seal Turbo Tunnel 240V 3phase 15KW # T4832/12-LDR
DESCRIPTION: For in good used condition is a Heat Sueal Turbo Tunnel. Please ask for price on shipping as this unit will require a custom quote(All we need is your zip code and confirmation on business address to get quote going for you normally 24hrs on quote like this or less) SPECIFICATIONS: Part# Tunnel# T4832/12-LDR Ser GKA9292 MD 796 15 KW- 240 volt 60hz 3 phase electric heat tunnel 28" Wide x 72" Long Belt Unit is 12" top 29" wide for material. 75"L x 40"W x 60"H Overall length 14 day warranty,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13f781a6a62-0xfa-
|
|
|
Weld-O-Tron 7112 Shrink Wrap Heat Tunnel -Good Condition
Precise Equipment Equipment Liquidators A company you can trust with over 1000 POSITIVE FEEDBACK 1024 E Arlee Place Phone: 714) 991-0427 Anaheim Ca. 92805 Fax: 714) 991-0437 Model: 7112 Opening: 16x8 Please see link for manufacture's spec sheet http:weldotron.com/pdf_files/7112%20Series.pdf Good Condition! Above specs are taken from manufacturer and accurate to the best of my knowledge. Please message/call for additional information Precise Equipment's E-Bay Terms Payments: Buyer must contact us within 48 hours of winning the bid. An Email must be received. Including your name, shipping address and phone number after the close of the auction. o Paypal is our preferred method of payment. Merchandise will be shipped as soon as possible after Paypal confirms payment. If you have any questions about payment methods because of new Ebay ... morerules please give us a call· All Payments must be received within 7 days of auction closing. If payment is not received within that time the item will be relisted and a non-bidders alert will be filed. All California residents will be charged sales tax. Unless a California Resale Certificate is provided. Canada/ Mexico/ and other International Purchases: Buyer is responsible for all customs fees. Warranty: Precise Printing Equipment and Liquidators does a complete review of all equipment prior to remarketing. We always give an honest and fair appraisal of items offered for sale. We sell all items with an accurate representation. Any known defects will be noted and pointed out. Precise Printing Equipment and Liquidators offers no warranty. Expressed or implied. All items are sold as-is. All sales are final. This item along with all other item for sale on E-bay are for sale locally. Shipping: We ship UPS Ground for all shipments within the UnitedStates. All items over 150 lbs will ship by a freight carrier. If you would like an estimate on shipping please e-mail us your zip code. Whether the address is residential or commercial, and whether you have a loading do
|
|
|
Bessler L-Sealer and Heat Tunnel Combo
This Bessler"Bestronic" All in one L-Sealer& Heat Tunnel Combo. The Model on the L-Sealer is 1913 MB Serial Number:11871105 The Heat Tunnel is a Model:T-14-BD Serial Number:11871099 I'm asking $2.800.00 for this unit. The overall footprint is 7' 3"L x 20" wide.
|
|
|
Cavalier Walking Beam Shrink heat Tunnel Shrinkwrap
This is a Cavalier Walking Beam Shrink heat Tunnel that I purchased at an estate. I'm not too familiar with the item. But I did plug it in and it heats up. This is for some type of shrink wrapping. The knob in the middle is missing, but it can be turned with your hand. A replacement knob can be purchased at most hardware stores or Home Depot etc. Good luck bidding.
|
|
|
Shrink Wrap - Heat Tunnel Clamco Brand Shrink Wrapper
See it in action here: https:www.youtube.com/watch?v=Pdq7RM8r0mg https:www.youtube.com/watch?v=mYVpkJ_hcp4 The L-Bar sealer is 20” x 60” and totally separate from the 20” wide tunnel.
|
|
|
Chromalox Small Non-Conveyor Type Heat Tunnel
New Page 2 DESCRIPTION: You are bidding on a Chromalox Small Heat Tunnel Non-Conveyor Type PHYSICAL CONDITION: Used This item has the typical signs of use. Such as small marks, etc. It is otherwise in good overall used condition. See pictures for details of item and condition. Click on them for a larger view. FUNCTIONALITY: Tested. Functions properly. Works well AUCTION INCLUDES: Chromalox Small Heat Tunnel ONLY as pictured. Auction items include only what is in the eBay picture(s) unless otherwise specified above. Including manuals, cables, cords, SD cards, power supplies, etc. RETURN POLICY We guarantee that this item will be in the condition stated above upon receipt. We offer a 7 day return policy in the event the item is not received as described. All returns must be authorized with an RMA# Items must be the original condition and be ... moreapproved/received within specified timeframe. Otherwise the return will be rejected and refund will not be given. Return shipping is the responsibility of the buyer. Items returned, but are as described in original listing will be subject to a 20% restocking fee and original shipping will not be refunded. SHIPPING INFO Our goal is to ship your item within 1-2 business days after payment has cleared. Freight items may take 2-3 business days. For your and our safety, we only ship to the confirmed Paypal address(AKA billing address) if you choose that option. Need it shipped elsewhere? Pay via cashiers check. o) Let's hope this does not occur. However in the event that an item is damaged during transit, buyer must notate that with the driver before signing for the package. Keep the box and all packaging materials and contact us within 2 business days of receipt of item. The flat rate listed is for delivery to the continental US only. Local Buyers may pick up items Mon- Fri between 9:00am and 4:00pm. Pay for the item in full first. Please, unless you are paying with cash. The shipping charge will be waived if the item is picked up from our facility. All Utah buyers will be c
|
|
|
X-RITE MODEL 706 L-BAR SEALER WITH SHRINK HEAT TUNNEL ***IN CALIFORNIA***
Used; nice condition. We have used it up til last week when we got a bigger one. Note this model has a wider opening than most shrink tunnels and can handle large objects- Tunnel: 11" high x 13-7/8" wide x 26-7/8" long Seal area: 17" deep x 18" long. Pick-up preferred- delivery in Southern California can be arranged- palletization& shipping in mainland USA. If needed, at cost. NO INTERNATIONAL Manufacturer X-Rite Model 706 Serial 002717 Seal Area 16" long x 18" wide Speed 15 to 20 ppm Tunnel Area 27” L x 14” W x 12” H rated up to 30 fpm Electrical 110Volts/ 1 Phase/ 60 Hz/ 18 Amps. Type of Stand heavy duty frame with casters Dimensions L 65” x W 26” x H 70” Weight 400 lb Features Condition USED. WORKING CONDITION Location Garden Grove. CA. USA(LA/OC region)
|
|
|
MLatter Shrinkwrap Machine, L sealer, heat tunnel, industrial stand
Up for auction is an MLatter shrink wrapping system that is in very good shape. This system was used and maintained in a small duplication business and has always been used and stored in an office environment. It is specifically wired for 120 volt AC so does not require 220 volt modification of sight. Basically. Plug in and run. Includes shrink wrap roll, tape and wire for L Sealer. Please ask all questions before bidding. Local pickup is strongly suggested. However, we will prepare the item for shipment if necessary. All shipping costs to be the responsibility of the buyer. This item is being sold as is. f04.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*6%3D%3F%3Ef04-13fd73d4371-0xf8-
|
|
|
Shrink Tunnel Shanklin 2 sections with heat sealer
Polyvalence. Technologie et performance Les tunnels Shanklin ® sont conçus pour rétracter le film autour des produits. En sortie de machine de conditionnement. Les rouleaux commandés/libres recouverts de silicone ou la bande transporteuse en mailles métalliques constituent des variantes possibles pour satisfaire vos exigences. Les modèles de la gamme sont conçus pour limiter au maximum les interventions de maintenance. Usage multiple: quel que soit leur type de voûte. Simple, allongée ou double, les tunnels Shanklin ® sont conçus pour les applications les plus exigeantes· Qualité inégalée: extérieur en acier épais. Intérieur résistant à la corrosion. Tout est pensé pour assurer une longue vie aux tunnels Shanklin ®. Performance: minimiser ... morela consommation d’énergie est capital pour Shanklin ®. Les tunnels sont fabriqués pour que l’air chaud atteigne rapidement le fil• Automatic sealing cycle• Power film unwind• Easy loading film inverting head• Left-to-right or right-to-left product flow• Easy access electrical controls. Automatic package discharge, brush backed pin discharge, hot knife seal system.
|
|
|
Plastic Packaging Heat Shrink Conveyor Tunnel - 48" l x 14"w x 6.5" H
DESCRIPTION OAL Associates Heat Shrink Tunnel Part# F1R0/RE7/14/48-12L Product Condition: USED- Good working condition when taken off line. Includes heating controller. This unit was used to heat shrink the plastic wrappers on the caps of packaging. Specifications: Total Length: 48" Opening Width: 14" Opening Height: 6.5" Temp Range: unkown Unfortunately we have been unable to find exact manufacture specs. Local Pickups Local pickup is available for all items Monday thru Friday 8:30am- 4:30pm Domestic Shipments Domestic shipments are sent via UPS or USPS Priority Service. We choose the fastest most economic shipping method based on a items size. Weight, and value ratio. Items sent to Alaska& Hawaii are subject to additional charges. International Shipments We ship to all international countries. International shipments ... moreare sent USPS International Priority unless otherwise requested. Contact us for international shipping quotes. Freight Shipments Items requiring freight will be securely strapped to a pallet and loaded at no additional charge. Carriers assess an extra charge if delivery is made to residential area and/or if the service of a lift gate are required. Rigging charges may apply to items requiring special loading/shipping requirements. Your satisfaction is our highest priority! We offer a 14 day money back guarantee on all items with the exceptions of items we list as"As-Is" or"As Shown" condition. Many times we have no prior knowledge of use and/or the ability to test an items working condition. So please ask questions before bidding/buying. Contact us at 248-240-2841 or contact@ballardintl.com with any questions. Concerns, or issues you may have.
|
|
|
Hix Tunnel Heat Dryer 11'
I'm selling my used Hix Tunnel Dryer. Here are the specs; Hix Tunnel Heat Dryer. Model Np-6019. 11' Electric heat tunnel. In: 60" wide X 48" Long. Out: 60' wide X 48" Long. I'm located in San Diego and would prefer local pickup. But. I am willing to ship if the buyer assumes all responsibilities. Please let me know if you have any questions.
|
|
|
Weldotron 7121 Shrink Wrap System Heat Tunnel
Weldotron Model 7121 Shrink Tunnel w/Model 6301 L-Sealer- Produces Uniform Shrink On All Package Surfaces- Construction features of the Model 7121 tunnel Has Separate Shrink Chamber and Conveyor Simple. Trouble Free Controls Adjustable Heat Pattern Pre-Heat and Cooling Chambers Air-Cooling Control System For Longer Life Fully Insulated Heat Chamber Triple Exit and Entry Curtains for Minimum Heat Loss. Greater Efficiency Sturdy Steel Bases. Caster Mounted for Complete Mobility Shrink Tunnel Specifications: Heater Bank 7000 watts Temperature: Thermostatically Controlled. 0-450 Degrees F. Conveyor: Speed Continuously Variable from 0 to 70 F.P.M. Controls: Line Breaker. Temperature Control; Conveyor Speed Control; Air Velocity Control; Conveyor Cooling On-Off Switch Electrical Requirements: 220 Volts. 35 Amp, Single Phase Dimensions: Tunnel Length ... more46" Width 19" Height 28" Chamber Opening 8"H.x16"W Conveyor Length 70" Width 19" Height 33.5" Weight: 450 Lbs Approximate L-Sealer Specifications: Controls: Automatic sealing temperature compensator; synchronous timer; heat control tap switch; adjustable loading tray Seal Area: 20"x16" 220 Volts- 17Amps Over-All Size: 30"Wx47"L Weight: 225 Lbs Approximate Additions Pictures/Questions Call or Email(513) 662-3000 or rwk(at)fuse(dot)net Owner retiring. Quality Unit and Fully Operational Under Power and Can Demonstrate Machine Located in NW Cincinnati Next to Major Interstate Check out my!
|
|
|
Dough Boy Heat Shrink Tunnel
400 Gallon Stainless Steel tank for Dispersion Mixer" Atlantic Equipment Inc. Serving Light. Medium& Heavy Industry 363 Petticoat Lane Bloomingburg. NY 12721(845 807 8727) We do our best to photograph and describe accurately Contact(845) 807 8727 with any questions Thank you for looking& good luck if you are bidding! pat dolan
|
|
|
RBS heat tunnel model ACT 179-395
RBS heat tunnel model ACT 179-395. Painted steel construction, variable controls for conveyor speed and tunnel temperature, overall dimensions 36' long x 33in wide, tunnel inside dimensions 24in long x 18in wide, on casters. Inventory# TUN-021 VISIT US AT WWW PCMACHINERY COM FOR OUR COMPLETE MACHINERY INVENTORY. PAYMENT P AYMENT: We accept pay pal. Wire transfers, visa, master card( CREDIT CARD TRANSACTION FEE MAY APPLY) Once payment is received and clears the item purchased will be shipped. SHIPPING All items must be paid for within 7 days and removed within 10 days. We charge $10 per day storage up to 30 days max. These charges are non refundable if you decide to cancel the purchase of the item after this time. All items requiring a skid will have an additional skidding fee added to the items final purchase price and shipping charge. ... moreSkidding fees range from a minimum of 100.00$US or more. Shipping cost of 100$US is applicable only to Montreal island for a skid of 4 feet x 4 feet x 4 feet with 500lbs as the weight. Any damages or missing items must be noted to the freight driver at the time of delivery AND WRITTEN ON THE BILL. OR NO CLAIM CAN BE MADE AFTER! TERMS OF SALE Some items are offered“Used-As-Is” UNLESS IT’S NOTICED. This does not mean that the item does not work; it just means that we have not run this item in production ourselves and we don’t have the expertise to thoroughly test it. Inspection: Anyone is welcome to come and inspect an item in person during regular business hours Monday thru Friday 8:00 am to 5:00 pm EST. If you can’t come see the item yourself. Then let us know what additional information or photos you need in order to make your decision and we will do our best to get it to you. CONTACT US IF YOU HAVE ANY QUESTIONS PLEASE CALL MARTIN LESPERANCE(514) 582-5852 OR email us. GOOD RELATIONSHIP Leaving us negative or a neutral feedback. Or to open a case does not resolve the issue! We believe strongly in providing the best in customer service. If there are any problems with your o
|
|
|
Compact Heat Tunnel Band Sealing Sshrink tunnel
This is a small stainless steel compact heat tunnel. Has a removable heat deverter. This tunnel is heated by a heat gun which is included, The tunnel looks to be have used for shrink bands. This heat tunnel size is 18 inches long. 5 inches high and 4 inches wide. That is the box dementions. Tunnel openings are 3 inches wide by 3 1/2 inches high. this is a auction for just the heat tunnel and compact heat gun. Thanks for looking.
|
|
|
Shanklin T7XL Heavy Duty Heat Tunnel
This tunnel has a chain Drive roller. This USED Shanklin T7XL Heat Shrink Tunnel is rated up 120 feet per minute- depending on materials and application. Aperture: 22" in Width; 8.5" in Height. Tunnel: 42" in Length. Temperature: 50° F to 500° F. Equipped with a 60" long x 15" wide steel mesh conveyor. Top center blower, and directional air flow controls. OAD: 60" L x 42" W x 76" H ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-1405114cbde-0x101-
|
|
|
HEAT SEAL HEAVY DUTY HEAT TUNNEL HDT2822
This heavy duty shrink tunnel has digital controls and a high volume single chamber and is 28 inches long 22 inches wide 8 inches high.
|
|
|
Beseler T14-8-D heat shrink tunnel L bar sealer combination 220 volt 1 phase
Selling a Beseler T-14-8-A heat shrink tunnel and L bar sealer combination. It is in working order and is powered by 220v single phase power. It has a 14 inch by 8 inch tunnel opening. the unit is mounted on 4 wheels so can easily be rolled around the shop or put in the corner when not in use. Powers right on and produces heat. Variable heat intensity and variable belt feed speed. PLEASE FEEL FREE TO E-MAIL FOR A SHIPPING QUOTE AS THE PRICE SHOWN ABOVE IS JUST A ROUGH ESTIMATE AND MAY VARY TO YOUR EXACT LOCATION. YOUMUST E-MAIL IF YOU NEED AN EXACT SHIPPING PRICE! LOCAL PICK UP IS MORE THAN WELCOME. BUT IF PICKED UP LOCALLY, A 6% PA SALES TAX WILL APPLY. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
|
|
|
Sergeant Sealer and Shrink Wrap Heat Tunnel
Sergeant 220C Multi-Combo Sealer and Heat Tunnel Machine is in very good condition. Chamber Dimensions 20" L X 16" W X 9" H Electrical 220VAC/1 Phase/ 17amps Maximum Film Width 24" Maximum Product Size 14" Seal Area 16" Shipping Weight 410 LBS Unit Dimensions 82"x 26"W x 27H.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1406157f999-0x105-
|
|
|
WELDTRON MODEL 7121A HEAT SHRINK TUNNEL W/ CONVEYOR & VARIABLE VELOCITY CONTROL
This item up for auction is a used Weldtron 7121A heat shrink tunnel for shrink film. I won this item in an auction from a closed down manufacturing facility. This item was working when removed from the closed down business in April of this year. It has been in storage up until the time I bought it. I do not have the right power outlets to be able to test this item myself but as i said it was working when removed from the business so it should still work fine now. The specs for this item are as follows: Wire rod product transfer belt to allow for maximum heated air flow around product during heat shrinking. Designed to produce a complete. Uniform shrink on a wide range of product sizes and shapes.The unit is made of heavy duty structural steel. The unit is on casters for mobility. The unit has a heavy duty blower, velocity control, precise ... morethermostatic heat temperature control, and variable speed live roller conveyor. Here is a link to the manufacturers spec sheet. weldotron.com/pdf_files/7121%20Series.pdf Weldtron Model 7121A 220 V 60HZ 1 Phase 35 AMP 7KW Cooling Fan On/Off Switch Heats up to 550 degrees Conveyor speed 0- 100 Variable Velocity Control 3 Setting Whole unit Measures 71.5"L X 20.25"W X 65.5" H Heat Tunnel Inside Measurements 46"L X 16"W X 13.25"H Conveyor Belt Measurements 71"L X 16"W Normal 0 My Prices are not set in stone. If you do not like my price just make me an offer. You never know I might just accept it. Ships to US. Canada and Mexico via freight. This can also be picked up locally. I will allow a 14 day return policy with a full refund for the item. Shipping cost will not be refunded and return costs are the buyers responsibility. As you can see from my feedback I go out of my way to make my customers happy and pride myself on that. If you have any questions at all please don't hesitate to ask. If you would like a freight quote please email me your zip code. Let me know if it will be a commercial or residential delivery, and if you need a truck
|
|
|
API Automatic Shrink Wrapper with Heat Tunnel
API Automatic Shrink Wrapper Wrapper: Model APSS 1800 SN 311 480 volts. 20 amps Heat Tunnel: Model APTU50 SN 357 480 volts. 30 amps 1995 Complete System Includes: Automatic shrink wrap machine with product lift. Stepper driven pusher Low pressure infeed conveyor Unwind stand with center guidance for use with folded film Powered scrim rewind Heat tunnel All Stainless Steel Currently accepts products that are a mx of 11.75" wide and up to 15" long. Appears to be able to be changed Overwrapping is done with a hot knife and side seal wheel API is now a part of Lantec. Inc Replacement parts are available from Lantec The entire machine is in very good condition and has all of its guards in place This machine was sold to 3M for well over $280.000 If you have any questions. Please call me at 1-218-346-7600. All equipment is offered on a"where ... moreis, as is" basis. All sales are final. There will be a $50 handling fee; for that we will put the item on a pallet, band it& shrink wrap it and load it on your truck. If we need to build a skid or a crate, you will be charged at our cost. Buyer is responsible for shipping. We recommend checking out freightquote.com for shipping costs. This item ships from zip code 56573. All of our equipment is also listed locally, so we reserve the right to end the auction early if the item sells elsewhere before this auction ends. Any equipment that is left at our facility for more than 30 days will become the sole property of All Trade Enterprises, LLC, unless prior arrangements have been made. Thanks for looking!
|
|
|
APM 70" HEAT SHRINK TUNNEL SHRINK WRAP TUNNEL HEAQT TUNNEL WELDOTRON
HERE IS A NICE RUNNING APM 70" HEAT SHRINK TUNNEL. THIS HEAT SHRINK TUNNEL CAN BE INSPECTED IN MPLS MN. TO SET UP AN INSPECTION PLEASE CALL JIM@ 952-931-7974. THANK YOU. NOTE: THIS MACHINE HAS BEEN CLEANED AND CYCLED AND IS IN GOOD RUNNING ORDER. GENERAL SPECIFICATIONS: MAKE: AMERICAN PACKAGING MACHINERY(APM) MODEL: MT 1872 SN: 285 TUNNEL WIDTH.19" TUNNEL HEIGHT.19" TUNNEL LENGTH.72" ELCECTRICS.480/3PH WEIGHT APPROX.1700 LBS. EQUIPPED WITH: VARIABLE SPEED DRIVE BELT CONTROL. DIGITAL TEMP CONTROL, VARIABLE SPEED AIR FLOW SYSTEM, EMERGENCY STOP BUTTON, IS MOUNTED ON FOUR CASTERS SO IT CAN BE USED IN A PORTABLE MODE. PRICE LOADED ON YOU TRUCK.$2750.00 SOLD AS IS AS INSPECTED. IF BUYER NEEDS THIS ITEM PALLETIZED. THERE WILL BE A $200.00 HANDLING FEE.
|
|
 |