In 
 
Order by: 
Available to: 
Price: 
 - 
$
9.99
Buy It Now
$9 Shipping
Condition: Used
Location: Westfield,IN,USA
$
44.99
Buy It Now
$12 Shipping
Condition: Used
Location: Westfield,IN,USA
As titled. Parts#G510. INCLUDES UPPER RACE& NEW RACE BALLS(NOT SHOWN) Good usable condition. No repairs or breaks. was used on 10ft model GB or all ... moremodel J mills. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
49.99
Buy It Now
$12 Shipping
Condition: New
Location: Westfield,IN,USA
$
19.99
Buy It Now
$11 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
21.99
Buy It Now
$14 Shipping
Condition: Used
Location: Westfield,IN,USA
$
5.5
Buy It Now
$13 Shipping
Condition: New
Location: Westfield,IN,USA
$
47.99
Buy It Now
$21 Shipping
Condition: New
Location: Westfield,IN,USA
$
9.99
Buy It Now
$7 Shipping
Condition: Used
Location: Westfield,IN,USA
$
18
Buy It Now
$9 Shipping
Condition: Used
Location: Westfield,IN,USA
$
24.99
Buy It Now
$20 Shipping
Condition: Used
Location: Westfield,IN,USA
10ft Woodmanse Vane Hinge in excellent usable condition as shown. Casting number 501. No breaks or repairs. Good tail pin holes. Includes Spring tension ... moreadjusting bolt. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received and item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
21.99
Buy It Now
$14 Shipping
Condition: Used
Location: Westfield,IN,USA
$
9.99
Buy It Now
$9 Shipping
Condition: Used
Location: Westfield,IN,USA
$
41
Buy It Now
$29 Shipping
Condition: New
Location: Westfield,IN,USA
$
30
Buy It Now
$15 Shipping
Condition: Used
Location: Westfield,IN,USA
$
59.99
Buy It Now
$17 Shipping
Condition: Used
Location: Westfield,IN,USA
Woodmanse 6ft Model E Hub in good used condition. Good brake surface. Not wallowed out as a portion of the original main shaft remains. Please call us ... moreat 940 597-7735 with your questions on this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
12.99
Buy It Now
$7 Shipping
Condition: Used
Location: Westfield,IN,USA
$
9.99
Buy It Now
$8.5 Shipping
Condition: Used
Location: Westfield,IN,USA
$
69.99
Buy It Now
$0 Shipping
Condition: Used
Location: Westfield,IN,USA
12ft Woodmanse partial wheel section in nice condition as shown. This is the early style that used the 3 prong clips as found on open gear and direct ... morestoke mills. These are Big Boys. Missing one sail and inner band. Possible delivery on one of our quartly trips through midwest states. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
49.99
Buy It Now
$13 Shipping
Condition: Used
Location: Westfield,IN,USA
$
2.99
Buy It Now
$6 Shipping
Condition: Used
Location: Westfield,IN,USA
$
14.99
Buy It Now
$9 Shipping
Condition: Used
Location: Westfield,IN,USA
$
2.99
Buy It Now
$6 Shipping
Condition: Used
Location: Westfield,IN,USA
8ft Woodmanse sail braces in nice usable condition as shown. These are the cast type. Your bid is for one. We have plenty. Call us at 940 597-7735 if ... moreyou have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
29.99
Buy It Now
$1.5 Shipping
Condition: Used
Location: Westfield,IN,USA
12ft Woodmanse brake casting in nice usable condition as shown. As found on open gear and direct stoke mills. No breaks or repairs. Call us at 940 597-7735 ... moreif you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
29.99
Buy It Now
$9 Shipping
Condition: New
Location: Westfield,IN,USA
$
30
Buy It Now
$15 Shipping
Condition: Used
Location: Westfield,IN,USA
$
30
Buy It Now
$15 Shipping
Condition: Used
Location: Westfield,IN,USA
$
19.99
Buy It Now
$14 Shipping
Condition: Used
Location: Westfield,IN,USA
$
19.99
Buy It Now
$14 Shipping
Condition: Used
Location: Westfield,IN,USA
$
44
Buy It Now
$12.5 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
29.99
Buy It Now
$12 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
34.99
Buy It Now
$11 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
19.99
Buy It Now
$11 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
69.99
Buy It Now
$12 Shipping
Condition: New
Location: Westfield,IN,USA
$
29.99
Buy It Now
$12 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
45.99
Buy It Now
$25 Shipping
Condition: New
Location: Westfield,IN,USA
As titled. Perfect usable condition as new. Fits on 2 1/2" angle iron towers. Great for Woodmanse. Samson, Challenge windmills plus Aermotor& ... moreDempster models. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received and item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
$
34.99
Buy It Now
$11 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
34.99
Buy It Now
$11 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
36.99
Buy It Now
$12 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
34.99
Buy It Now
$11 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
29.99
Buy It Now
$11 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
29.99
Buy It Now
$11 Shipping
Condition: New
Location: Westfield,IN,USA
If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
$
36.99
Buy It Now
$11 Shipping
Condition: New
Location: Westfield,IN,USA
1
 In 

Past Items  
 
8ft Woodmanse sail braces in nice usable condition as shown. These are the cast type. Your bid is for one. We have plenty. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback ... morewhen the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
As titled. Fits 6ft& 8ft steel open back geared mills. Part 313 used on mill produced before May 1915. Very nice usable condition. No breaks or repairs. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. Feedback. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item.
10ft Woodmanse Vane Hinge in excellent usable condition as shown. Casting number 501. No breaks or repairs. Good tail pin holes. Includes Spring tension adjusting bolt. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. Feedback. We leave feedback when the transaction is complete. By complete. We mean that ... morethe buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received and item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
As titled. Nice usable condition. Part G55. No breaks or repairs. Used on 6ft& 8ft model G mills. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge only a reasonable amount of handling. Commensurate with the amount handling performed; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that their is an issue with the item.
As titled. Excellent usable condition. Properly shaped pivot shaft holes. Part G4. No breaks or repairs. Used on 6ft& 8ft model G mills. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item.
DON'T BE A BUYER WHO FAIL TO CONTACT US BEFORE THEY BUY TO GET AN ACCURATE SHIPPING QUOTE. WE CAN SHIP IT FOR LESS IF YOU'LL PROVIDE US WITH DETAILS TO GET YOU A PERSONALIZED QUOTE. SHIPPING TO A COMMERCIAL ADDRESS OR TERMINAL IS THE LEAST EXPENSIVE WAY TO GO. TAKE A MOMENT TO SEND US A NOTE AND SAVE! As titled. It has not been rebuilt and is frozen. Gears appear excellent as are other visable parts. Sold As Is. Bent mast pipe easily replaced. Shares several parts with the Woodmanse model 45 and Fairbanks-Morse model 45. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. ... moreWe work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
As titled. Fits either 6ft model G or E mills. Includes spring& J hook. Nice usable condition. No breaks or repairs. Parts 6E3. 6E29&8G360. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item.
As titled and shown. After locating this part at the request of an Oregon windmiller. He stiffed us on the purchase. Now you can reap the rewards of our efforts. Fits the 8ft open backed geared model referred to as a Woodmanse Steel or a Woodmanse S. Nice usable condition. No breaks or repairs. Please call us at 940 597-7735 with your questions on this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the ... moreevent that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Woodmanse 6ft Model E Hub in good used condition. Good brake surface. Not wallowed out as a portion of the original main shaft remains. Please call us at 940 597-7735 with your questions on this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. ... moreWe leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
As titled. Usable condition& solid but reflects wear as shown and in need of cleaning. Parts 319. No breaks or repairs. Used on 6ft& 8ft models. Originally sold for Open Gear. G& E models. Can be used with other models using a 2" mast. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item.
Woodmanse 8ft Wheel Spoke in good used condition. Will fit your AirMaster. E or G windmill. You bid is for ONE UNIT. Please call us at 940 597-7735 with your questions on this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when ... morethe transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
As titled. Fits 8ft steel open back geared mills. Part 372 pour babbit bushing type. This style was used on mills produced before May 1915. Good usable condition once bushings are repoured. No breaks or repairs. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. Feedback. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item.
As titled. Parts#G510. INCLUDES UPPER RACE& NEW RACE BALLS(NOT SHOWN) Good usable condition. No repairs or breaks. was used on 10ft model GB or all model J mills. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct ... morethe issue. Feedback We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
8ft Woodmanse wheel section in nice usable condition as shown. This is the late style that used the folded tab clips as found on AirMaster models or the Fairbanks Morse Model 45 mills made under contracr by Woodmanse. Will require some minor reshaping before it bolts in to place. Ships as an OS3 oversize item as is. Will gladly cut apart to ship cheaper if all you need is the sails. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of ... morepayment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Woodmanse pulley sheave in nice usable condition still attached to a portion of the pulley arm as shown. As found on open gear and direct stoke mills. No breaks or repairs. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us ... moreso we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
8ft Woodmanse sail in nice usable condition as shown. This is the late style that used the folded tab clips as found on AirMaster models or the Fairbanks Morse Model 45 mills made under contracr by Woodmanse. This was cut off a damage setion. Others listed too. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the ... moreitem. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Woodmanse long shaft cap in nice usable condition as shown. As found on open gear and direct stoke mills. No breaks or repairs. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave ... morefeedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Woodmanse hub in nice usable condition as shown. As found on open gear and direct stoke mills. This is a Big Boy. Shaft reflects wear. Gear has chipped tooth. Hub is outstanding without breaks or repairs. Possible delivery on one of our quartly trips through midwest states. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there ... moreis an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Woodmanse wheel spokes in nice usable condition as shown. As found on open gear and direct stoke mills. These are Big Boys. 7 units in total. 2 have bends in one leg. One is missing its girt. Possible delivery on one of our quartly trips through midwest states. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with ... morethe item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Woodmanse wheel section in nice usable condition as shown. This is the early style that used the 3 prong clips as found on open gear and direct stoke mills. These are Big Boys. Cool show piece. Possible delivery on one of our quartly trips through midwest states. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue ... morewith the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Woodmanse tower cap as shown. Will need a welder to level out race area as ball divets exist. As found on open gear and direct stoke mills. No breaks or repairs. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can ... morecorrect the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Woodmanse brake casting in nice usable condition as shown. As found on open gear and direct stoke mills. No breaks or repairs. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave ... morefeedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Pair of 8ft Woodmanse sails in nice usable condition as shown. This is the late style that used the folded tab clips as found on AirMaster models or the Fairbanks Morse Model 45 mills made under contracr by Woodmanse. This was cut off a damage setion. Others listed too. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue ... morewith the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Woodmanse upper pump rod guide cap in nice usable condition as shown. As found on open gear and direct stoke mills. No breaks or repairs. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. ... moreWe leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Woodmanse partial wheel section in nice condition as shown. This is the early style that used the 3 prong clips as found on open gear and direct stoke mills. These are Big Boys. Missing one sail and inner band. Possible delivery on one of our quartly trips through midwest states. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that ... morethere is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Woodmanse short shaft cap in nice usable as shown. As found on open gear and direct stoke mills. No breaks or repairs. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback ... morewhen the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
12ft Woodmanse vane hinge in nice usable condition as shown. As found on open gear and direct stoke mills. No breaks or repairs. Possible delivery on one of our quartly trips through midwest states. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied ... moreplease contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
As titled. A single large gear still mounted to its shaft. Fits either 8ft Woodmanse Air Master or Fairbanks Morse Model 40 mills as they were both built by Woodmanse. Nice usable condition. No breaks or repairs. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item.
6ft& 8ft Woodmanse pump rod mount casting in nice usable condition as shown. Includes good pivot piun. No breaks or repairs. Very usable. Part 8G22/ 8E22 for models G& GB. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact ... moreus so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. CLOSE-OUT. Buy it now as the next stop is the scrap yard when this listing ends.
6ft& 8ft Woodmanse pump rod in nice usable condition as shown. No breaks or repairs. Some pitting due to age. Very usable. Part 8G23 for models G& GB. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct ... morethe issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. CLOSE-OUT. Buy it now as the next stop is the scrap yard when this listing ends.
We purchased a private collection of cast iron weights. We have listed a number of them we are offering for sale. Please check our other listings. Origin unknown. Listing is for a spoke weight used on a large(14-18ft diameter) early wooden wheel windmill produced by the founders of The Woodmanse Mfg. Co. of Freeport. IL. The weight has W433 part number cast on its side. That part number precedes its use after 1915 on the Direct stroke steel wheel mill. This weight was bolted to a wooden wheel spoke when it was found. It appears to be old with scaring typical of an aged piece. The weight is not listed in the Rick Nidey& Don Lawrence Windmill Weight Guide. Imperfections as shown. Its age in addition to the size mill it was used on makes this a special find for any collection. It is roughly 4 1/2" X 3" X 2 1/4" in sizes and ... moreweights just under 5lbs. Spoke weights. Referred to occasionally as balance weights, were actually used to assist a windmill in the pumping of water by creating additional centrifugal inertia generated by the wheel as it turned. Spoke weights were placed on a single spoke located on the wheel at the point the mill began its lifting stroke as it spun. Call us at 940 597-7735 with questions about this item.