|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$58.00 Shipping Condition: Used Location: Westfield, United States As titled. Imperfections as shown.
Buy It Now
$9.00 Shipping Condition: New Location: Westfield, United States Upper vane hinge for a 6.5ft Baker Monitor WB. No breaks or repairs. WB 11 Don't pay list of $41.85 when you can have them for a fraction of the cost. ... moreCall us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$18.00 Shipping Condition: Used Location: Westfield, United States Hinge casting for the Duplex Superior windmill. Very good condition without breaks or repars. Tail pin hole has some ovaling. Call us at 940 597-7735 ... moreif you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$7.00 Shipping Condition: Used Location: Westfield, United States As titled and shown. No breaks or repairs. Good usable condition. Only fits 6ft models.
Buy It Now
$58.00 Shipping Condition: Used Location: Westfield, United States As titled. Imperfections as shown.
Buy It Now
$13.50 Shipping Condition: New Location: Westfield, United States As titled. Unused perfect condition. No breaks or repairs. For WC12/AC12 applications.
Buy It Now
$58.00 Shipping Condition: Used Location: Westfield, United States GREAT DECOR WALL HANGER!
Buy It Now
$7.00 Shipping Condition: Used Location: Westfield, United States As titled and shown. No breaks or repairs. Good usable condition. Only fits 6ft models.
Buy It Now
$129.00 Shipping Condition: Used Location: Westfield, United States As titled. No repairs.
Buy It Now
$55.00 Shipping Condition: New Location: Westfield, United States
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$17.50 Shipping Condition: Used Location: Westfield, United States Vane Hinge Assembly for a 6ft Freeman & Sons Clipper mill. Originally produced in Racine, WI. No breaks or repairs.
Buy It Now
$58.00 Shipping Condition: Used Location: Westfield, United States As titled. Fits a small 8ft version model 27 mill that uses the same case as the 6& 6 3/4 ft models. Straight usable condition but tailpin holes will ... moreneed som minor work. Fits models with#3703 case. VANE NOT INCLUDED. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$9.00 Shipping Condition: New Location: Westfield, United States As titled and shown. No breaks or repairs. Good usable condition. Only fits 10ft models.
Buy It Now
$49.00 Shipping Condition: New Location: Westfield, United States As titled and shown. No breaks or bend. Perfect galvanize and tail pin holes. Fits either an 8ft A-702 or A-602. This part is not the inferior quality ... moreor ill fitting Mexican made item sold for WindEngine 702's. Plus our delivered price is lower. You can't beat Quality at The Best Price. Given this items shape and demensions it is not likely we can combine it with other items to reduce shipping cost given adding girth will throw it into an OS3 oversize status subject to heavy surcharges. Please check with us first if you are buying multiple items. Please call us at 940 597-7735 with your questions on this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$14.00 Shipping Condition: Used Location: Westfield, United States 8ft Woodmanse Vane Hinge in excellent usable condition as shown. Casting number 301. No breaks or repairs. Good tail pin holes.
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$10.00 Shipping Condition: New Location: San Angelo, United States
Buy It Now
$20.00 Shipping Condition: Used Location: Westfield, United States 10ft Woodmanse Vane Hinge in excellent usable condition as shown. Casting number 501. No breaks or repairs. Good tail pin holes. Includes Spring tension ... moreadjusting bolt. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received and item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$59.00 Shipping Condition: Used Location: Westfield, United States As titled and shown. No breaks or bend. Perfect galvanize and tail pin holes. Fits either an 8ft A-702 or A-602. This part is not the inferior quality ... moreor ill fitting Mexican made item sold for WindEngine 702's. Plus our delivered price is lower. You can't beat Quality at The Best Price. Given this items shape and demensions it is not likely we can combine it with other items to reduce shipping cost given adding girth will throw it into an OS3 oversize status subject to heavy surcharges. Please check with us first if you are buying multiple items. Please call us at 940 597-7735 with your questions on this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$9.00 Shipping Condition: New Location: Westfield, United States As titled. Unused perfect condition. No breaks or repairs. Perfect pin holes freshly drilled. For WC11/AC11aplications.
Buy It Now
$58.00 Shipping Condition: Used Location: Westfield, United States As titled. Imperfections as shown.
Buy It Now
$129.00 Shipping Condition: Used Location: Westfield, United States As titled. No repairs.
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$15.00 Shipping Condition: New Location: Viborg, United States USA*Windmill is a new ebay seller that will focus solely on restoration parts for Chicago Aermotor 502. 602& 702 mills. Don't mix us up with any ... morevendor of similar name. All our parts are USA made. We do not supplement our inventory with Chinese imports or the Mexican made clone items being imported by Muller Industries of S.D. or WE 702 out of TX. We take pride in our support of U.S. craftmanship and while those selling imports may find a way to do it cheaper.they will never be equal or better in quality. All are items are covered by a no questions asked refund policy as we have the utmost confidence in your satisfaction. This listing is for a new vane spring to fit on 10ft B702. Or B602 models. Pictured at top. Part B28. Free shipping limited to contiguous 48 States.
Buy It Now
$10.00 Shipping Condition: New Location: Viborg, United States
Buy It Now
$45.00 Shipping Condition: New Location: Westfield, United States Custom made early style WB Vane, new, unlogo'd.
Buy It Now
$18.80 Shipping Condition: Used Location: Prairie Farm, United States 6ft Woodmanse Vane Hinge Casting Windmill 6AW3. Used original part, appears good shape see photos
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States This can be used for your 802 restoration. It includes 2- 48" X 36" sheets as shown in our lead picture. These famous new style 802 models were made in ... morelimited quantities given windmills were not in high demand in the 1960's, and those that were sold were so grossly flawed in design that few lasted long at all.
Buy It Now
$55.00 Shipping Condition: New Location: Westfield, United States As titled. A stem(only) for an 8ft Hambone model C. Good used condition. Solid with a small repair at the rear girt. Good tail pin holes. Call us at 940 ... more597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$15.00 Shipping Condition: New Location: Westfield, United States As titled. Unused perfect condition. No breaks or repairs. For WB12 applications.
Buy It Now
$9.90 Shipping Condition: New Location: Westfield, United States As titled and shown. No breaks or repairs. Good usable condition. Only fits 8ft models.
Buy It Now
$68.00 Shipping Condition: New Location: San Angelo, United States 18 gauge STEEL stencil for 8ft Aermotor vane for use on your A-602 or A-702. Pictures 2 & 3 are what it will look like on a vane.
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$9.00 Shipping Condition: New Location: San Angelo, United States USA*Windmill is a new ebay seller that will focus solely on restoration parts for Chicago Aermotor 502. 602& 702 mills. Don't mix us up with any ... morevendor of similar name. All our parts are USA made. We do not supplement our inventory with Chinese imports or the Mexican made clone items being imported by Muller Industries of S.D. or WE 702 out of TX. We take pride in our support of U.S. craftmanship and while those selling imports may find a way to do it cheaper.they will never be equal or better in quality. All are items are covered by a no questions asked refund policy as we have the utmost confidence in your satisfaction. This listing is for a new vane spring to fit on 8ft A702. Or A602 models. Pictured at center. Part A28. Free shipping limited to contiguous 48 States.
Buy It Now
$55.00 Shipping Condition: New Location: Westfield, United States As titled. New unused condition. No breaks or repairs. This part is not interchangable with a hinge pin on a WC. Don't pay list of $15.20 for this ... morepart or any other when you can buy it for less. See our other auctions for WB& WC items at similar savings. If it isn't already listed we will gladly create an auction for you. Call us at 940 597-7735 if you have questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13eb239e49b-0xfa-
Buy It Now
$13.00 Shipping Condition: New Location: Westfield, United States As titled. Unused perfect condition. No breaks or repairs. For WB12 applications.
Buy It Now
$8.00 Shipping Condition: New Location: Chicago, United States Don't be fooled by Justin's claims of knowledge or quality or that he is the leading source of anything windmill related. Justin is only a "factory" in ... morehis own mind. Each layout is reproduced from an actual tail vane.
Buy It Now
$10.00 Shipping Condition: New Location: Chicago, United States 6ft Aermotor X702 X602 Windmill Tail - Vane Mounting Brackets. X44,45,46 & 46. THIS IS THE REAL THING. Nothing like the junk being sold by Justin. Don't ... morebe fooled by Justin's claims of knowledge or quality or that he is the leading source of anything windmill related.
Buy It Now
$10.50 Shipping Condition: New Location: Chicago, United States USA*Windmill is a new ebay seller that will focus solely on restoration parts for Chicago Aermotor 502. 602& 702 mills. Don't mix us up with any ... morevendor of similar name. All our parts are USA made. We do not supplement our inventory with Chinese imports or the Mexican made clone items being imported by Muller Industries of S.D. or WE 702 out of TX. We take pride in our support of U.S. craftmanship and while those selling imports may find a way to do it cheaper.they will never be equal or better in quality. All are items are covered by a no questions asked refund policy as we have the utmost confidence in your satisfaction. This listing is for a new vane spring to fit on 6ft X702. Or X602 models. Pictured at bottom. Part X28. Free shipping limited to contiguous 48 States.
Buy It Now
$15.00 Shipping Condition: New Location: San Angelo, United States USA*Windmill is a new ebay seller that will focus solely on restoration parts for Chicago Aermotor 502. 602& 702 mills. Don't mix us up with any ... morevendor of similar name. All our parts are USA made. We do not supplement our inventory with Chinese imports or the Mexican made clone items being imported by Muller Industries of S.D. or WE 702 out of TX. We take pride in our support of U.S. craftmanship and while those selling imports may find a way to do it cheaper.they will never be equal or better in quality. All are items are covered by a no questions asked refund policy as we have the utmost confidence in your satisfaction. This listing is for a new vane spring to fit on 10ft B702. Or B602 models. Pictured at top. Part B28. Free shipping limited to contiguous 48 States.
Buy It Now
$14.00 Shipping Condition: New Location: Westfield, United States As titled. Fits 8ft Baker Monitor WC mills. No breaks or repairs. Sold as new in excellent usable condition. Your bid is for ONE. Call us at 940 597-7735 ... morewith your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13e6352e2b8-0x102-
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$4.80 Shipping Condition: New Location: Westfield, United States The Windmills at Riverside Farm is a not-for-profit historical windmill park focused on the preservation and restoration of vintage windmills. The park ... morefeatures restored windmills and associated memorabilia in a beautiful country setting. Proceeds from this auction help to defray costs of offering this privately held park to public viewing and access. Our low Buy Now pricing exists to assist those restoring windmills of their own with affordable and safe access to information that may be helpful in their restoration efforts. No need to buy a CD that may contain a computer or phishing virus. See our" About Me" page. The Monitor Wind Engine windmill was built and sold by The Monitor Manufacturing Co. Of Auburn, IN, during the 1880's. It was a wooden wheel and vane mill. You are bidding on a black and white photo copies of parts list& diagramfrom a late 1880's manual. As shown. You are not bidding on my original. 7- 8.5" X 11" page. Great guide if you own one and need to know whether you have it all. Includes parts list, daigrams and descriptive narrative plus erecting instructions. Call us at 940 597-7735 with your questions about this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us f
Buy It Now
$5.00 Shipping Condition: New Location: Westfield, United States As titled and shown. No breaks or repairs. Good usasble condition. Only fits 6ft models. Please call us at 940 597-7735 with your questions on this item. ... moreGuarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge only a reasonable amount of handling. Commensurate with the amount handling performed; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that their is an issue with the item. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received and item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$129.00 Shipping Condition: Used Location: Westfield, United States As titled. No repairs.
Buy It Now
$47.00 Shipping Condition: Used Location: Westfield, United States As titled. USED CONDITION. No breaks or bend. Good galvanize and decent tail pin holes. Fits either an 6ft X-702 or X-802.
Buy It Now
$10.00 Shipping Condition: New Location: San Angelo, United States
Buy It Now
$9.00 Shipping Condition: New Location: Westfield, United States As titled. Fits 8ft Baker Monitor model K& E mills. Solid in all regards. Perfectly shaped holes. Call us at 940 597-7735 with your questions about ... morethis item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon reciept of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States If we had $1 for every time we were ask if we had windmill tail vane stencils. We wouldn't need to sell these. See our additional stencil layout listings ... moreas we now offer those for various sizes& models of Aermotor, Baker Monitor, Dempster, Challenge, Flint& Walling Star, Red Cross, Andrew, Heller Aller, Currie, Fairbanks-Morse, Samson/ Stover& Woodmanse manufactured windmills. Many others are in production. Each stencil layout is reproduced from either actual tail vanes or published manufacturer data. Depending on specifics for your windmill each stencil layout is reproduced to scale on 48" X 36" or 36" X 24" paper. Shipped rolled in a protective tube via Fed Ex SmartPost. Printing is black& white. Each is easily used by simply cutting out the logo images with an Exacto knife and securing the stencil layout in place with masking tape. The digital printing enlargement process used does not produce 100% crisp images so in some cases you'll need to use common sense when cutting out a letter. Trace the images onto your vane and you're ready to paint an exact replica of the factory designed logo. Each is watermarked with a large red signature to stop unauthorized reproduction. While the watermark is very obvious it will not interfere with the stencils use. The watermark is not shown in the listing picture. If you have concerns please contact us before bidding. If you're a prefectionist you may want to consider alternatives such as the logo'd vanes we sell in our ebay store starting at $159.99. Having used our layouts several times for projects at our windmill park we offer these helpful tips for use. 1. Once ready to begin your project unroll the layout face down on a table or other large flat surface. Place a weighted object like a drinking glass at each corner and allow the layout to sit overnight. This will keep the layout from rolling up on you as you start to cut out letters. 2.Use a sharp Exacto knife to cut out your letters. 3. We recommend using a large s
Buy It Now
$12.45 Shipping Condition: Used Location: Prairie Farm, United States 8ft Aermotor A-702 A-602 Windmill Tail - Vane Mounting Brackets. Vintage parts
Buy It Now
$67.00 Shipping Condition: New Location: Westfield, United States As titled. NEW CONDITION. No breaks or bend. Good galvanize and decent tail pin holes. Fits either an 10ft B-702 or B-802.
Buy It Now
$16.00 Shipping Condition: New Location: Westfield, United States These famous new style 802 models were made in limited quantities given windmills were not in high demand in the 1960's, and those that were sold were ... moreso grossly flawed in design that few lasted long at all.
Buy It Now
$9.00 Shipping Condition: Used Location: Westfield, United States 8ft Woodmanse Bushing for Vane Hinge Governor Spring. Good tail pin hole.
Buy It Now
Condition: New Location: Westfield, United States 8ft wheel for Star 37. They are made to original factory specifications so fit is always perfect. It is possible they will be ready sooner. THIS ITEM ... moreIS OVERSIZE.
Buy It Now
Condition: New Location: Westfield, United States Spokes for an 8ft Currie. Can be used on open gear or oil bath models. Rusty surface but in excellent condition. Properly shaped without breaks or repairs. ... moreYour bid is for one. The spokes are currently stored at our north central KS lot. Perhaps I can deliver one or more for you for a small fee on one of my future windmill trips. Moving them to one of our IN locations by June 1. Available for inspection and shipping after that. Please call us at 940 597-7735 with your questions on this item. Guarantee All items are guaranteed to be received in the condition as described. Including loss or damage in shipment. If there are any problems with the item upon receipt, please contact us. We strive to provide our buyers with 5 STAR service in all categories. We work to provide a complete and accurate description of the product; charge virtually zero amount for handling; ship within 48 hours of payment; let each buyer know when their item is shipping; and work with the buyer in the event that there is an issue with the item. If upon receipt of your item you are not 5 STAR satisfied please contact us so we can correct the issue. Feedback. We leave feedback when the transaction is complete. By complete. We mean that the buyer has received the item and is satisfied with the transaction, or in the event of a problem, the buyer has worked with us for a satisfactory resolution. The easiest way for a buyer to let us know that they have received an item and they are satisfied is to leave feedback. A buyer can also let us know via email through the eBay message system. We will leave feedback as soon as possible after that.
Buy It Now
$8.00 Shipping Condition: New Location: Chicago, United States Don't be fooled by Justin's claims of knowledge or quality or that he is the leading source of anything windmill related. Justin is only a "factory" in ... morehis own mind. Each layout is reproduced from an actual tail vane.
Buy It Now
$10.00 Shipping Condition: New Location: Chicago, United States 8ft Aermotor A-702 A-602 Windmill Tail - Vane Mounting Brackets. A44,45,46 & 46. THIS IS THE REAL THING. Nothing like the junk being sold by Justin. Don't ... morebe fooled by Justin's claims of knowledge or quality or that he is the leading source of anything windmill related.
Buy It Now
$8.00 Shipping Condition: New Location: Chicago, United States Don't be fooled by Justin's claims of knowledge or quality or that he is the leading source of anything windmill related. Justin is only a "factory" in ... morehis own mind. Each layout is reproduced from an actual tail vane.
|
|
|
|