|
|
Order by: Available to: eBay Affiliate Links
|
$229.48 Shipping Condition: For parts or not working Location: Gilroy, United States 95020 (408) 886-3700. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping Condition: Used Location: Hollister, United States The unit shows signs of use, such as, minor scuffing. These products are subject to export restrictions under U.S. law.
Buy It Now
Condition: Used Location: Bosque Farms, United States Do not have the proper power or knowledge to try it out. We do not have power cords to provide unless they are attached to the item or unless stated that ... morethey are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Buy It Now
Free Shipping Condition: Used Location: Temple, United States LOGANSEMI 2547602424.
Buy It Now
Free Shipping Condition: Used Location: Temple, United States LOGANSEMI 2547602424.
Buy It Now
Free Shipping Condition: New Location: San Jose, United States RF Front end is our own longer reach (>6") design with better functionality. RF noise probing. 10+ More units available price is per One Unit.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Temperature Range: -10°C to +200°C. 8” (203mm) chuck with 3/8” (1cm) Z-travel. Mitutoyo microscope with two long working distance objectives 2X and 10X. ... moreInventory No. 64800.
Buy It Now
Condition: For parts or not working Location: Gilroy, United States For all Texas orders, the rate of 8.25% will be applied.
Buy It Now
$5600.00 Shipping Condition: Used Location: Livermore, United States TWO(2) TEL P8 AUTOMATIC WAFER PROBERS w/ 2) TEL THERMO GENERATORS D204 Up for bid in this auction are(2) TEL P8 Automatic Wafer Probers along with(2) ... moreTEL D204 Thermo Generators. One of the units is fully functional and the other was listed as inactive. Both units are complete with all their parts and although both may work properly. I am selling them as(1) working unit and(1) spare unit that may or may not be fully functional. These were recently removed from a factory floor and were in great cosmetic condition, however after the shipping company got them over to me the front doors and exterior on both units got a little banged up. Included is a Hot/Cold chuck, software disks, and extra hosing(not pictured) Both units have the display monitor, it just got cut off in the 2nd photo. Buyer pays $200 for packing PLUS ACTUAL SHIPPING cost. CA residents pay CA sales tax(exemption permits welcome) Please E-mail me any questions or I can be reached at 323-664-8655.
Buy It Now
Condition: Seller refurbished Location: Palisades Park, United States Excellent Condition. We are minutes from Manhattan, and local to all 3 New York City Area Airports. Assorted chucks available including hot chucks.
Buy It Now
$20.00 Shipping Condition: New Location: San Jose, United States C99729 Electroglas 266067-001 Rev. B RDC 8" Wafer Prober Gold Vacuum Hot Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) ... moreClick to Enlarge) Product ID# C99729 This Electroglas 266069-001 Rev. A 8" Wafer Gold Vacuum Hot Chuck looks to be in very good cosmetic condition. Possibly unused. However, I have no way of testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 11"L x 11"W x 3"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $22.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 5.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state tax rate applies. Or
Buy It Now
$43.00 Shipping Condition: Seller refurbished Location: San Jose, United States RF Front end is our own longer reach (3.5") design with better functionality. RF noise probing. Available Now at 3.5" Arm. 10+ More units available price ... moreis per One Unit. Base footprint: 1.50" X 2.00".
Buy It Now
Condition: Used Location: Singapore WENTWORTH LABS 6" MANUAL PROBE STATION/ WAFER PROBER (MITUTOYO MICROSCOPE) w/ TEMPTRONIC THERMO CHUCK. Type: Manual Probe Station/ Wafer Prober. Mitutoyo ... moreWF Trinocular Phototube/ Head. (1 pair) Mitutoyo WF 10x/24 Eyepieces.
Buy It Now
$89.69 Shipping Condition: Used Location: Las Vegas, United States The MicroZoom Probe Station is also included, making it a complete setup for all your probing needs. This item is used, but it's still in great working ... morecondition.
Buy It Now
Free Shipping Condition: Used Location: Temple, United States
Buy It Now
Free Shipping Condition: Used Location: Killeen, United States Model: PURF3-r/2L81-050097-31.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States System/Tool: P-8 Wafer Prober. It was removed from a P-8 tool. Part No: P-8 Tray Loader Assembly.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Manual quick lift platen. Mitutoyo microscope with single long working distance objective.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Cascade Microtech S300 semi-automatic and manual RF/Microwave Probing System. The S300 supports wafer sizes and shards from 0.5 in. (1 mm) all the way ... moreup to 12 in.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States
Buy It Now
Free Shipping Condition: Used Location: Rancho Cordova, United States This Wafer Prober Stage Part has been removed from a fully operational system and is confirmed to be fully functional. It is in good overall physical ... morecondition, though please note it exhibits some scuffs and scratches from previous use. We provide 30-Day Warranty. If you encounter any issues within the warranty period, please contact us for assistance. Please note, there is no power supply or power cord included. Please review the provided images for a better understanding of the item's condition. If you have any questions or need additional information, please feel free to contact us.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Electroglas 255901-001 is used working surplus. The physical condition is good, but there are signs of previous use and handling. Installed Part ... moreNumbers.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: RMHM4. This Electroglas RMHM4 is used working surplus. The physical condition is good, but there are signs of previous use and handling. Part ... moreNo: 247225-002, XFR Arm Subsystem. Part No: 247219-002, Prealign Subsystem.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. Model No: BPB IIb. These products are subject to export restrictions ... moreunder U.S. law. Serial numbers or country of manufacture may vary.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Steel platen accepts DC/HP/CAP Positioners (magnetic or vacuum mount). Mitutoyo Microscope with three long working distance objectives, 2x, 10x, 20x and ... more10x eyepieces.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Platen accepts vacuum or magnetic base probe manipulators. Linear platen lift. Mitutoyo Microzoom microscope with two long working distance objectives.
Buy It Now
$43.00 Shipping Condition: Seller refurbished Location: San Jose, United States RF Front end is our own longer reach (>6") design with better functionality. RF noise probing. 10+ More units available price is per One Unit. Base footprint: ... more1.50" X 2.00". this positioner with probers Including.
Buy It Now
Condition: Seller refurbished Location: Palisades Park, United States Wentworth Labs P M L 8000. Analytical Manual Probe Station. (A - Right Rear ). Fiber Optic Illumination. 10x Eye pie ces / 10x & 20x Objectives.
Buy It Now
$17.00 Shipping Condition: Used Location: Killeen, United States
Buy It Now
$20.00 Shipping Condition: Used Location: Temple, United States Uniwire SystemChannel Interface Module. Model: UI-120A I/O.
Buy It Now
Free Shipping Condition: Used Location: Temple, United States Serial numbers or country of manufacture may vary. Sale Details.
Buy It Now
Free Shipping Condition: Used Location: Killeen, United States
Buy It Now
$139.22 Shipping Condition: New – Open box Location: Phoenix, United States 29 pt RTD Sensors. Connection: D-type, high density, sub-miniature with 64 pins. (2 connectors for 18-34 sensors per wafer.). Wafer Size: 300 mm. Accessories ... morewith the Process Probe Lead Materials: Polyimide coated copper.
Buy It Now
$15.00 Shipping Condition: New Location: Crystal Lake, United States Up for sale is one new and unused, as I know it, un tested and will be sold in new and working order featuring a GGB 40A-SG-150-PW prober probe tip. See ... morepictures for details and add 15.00 for shipping fedex ground within the continental USA not including Alaska, Canada, Mexico, HI, PR or any out of country shipments. Extra charges apply.
Buy It Now
Free Shipping Condition: Used Location: Corona, United States
Buy It Now
Condition: Used Location: San Jose, United States Prober ID 9390088LZ, User ID=04011010. Chuck temp= Room and Hot=200c. Chuck: 300mm. Wafer Size= 200mm and 300mm. Cassette= Front open FOUP 300mm and 200mm ... morecassette. We have 2 units available both units are currently used with ring holder to work with 4.5" probe card.
Buy It Now
$37.00 Shipping Condition: Seller refurbished Location: San Jose, United States THz, source/load pull, RF noise probing. Only one unit available price is per One. Feature resolution 3 µm Travel range. San Jose, California 95131 USA. ... moreHigh-performance versatile wafer-level reliability probing.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Model No: TVB3102-1/SIO. The physical condition is good, but there are signs of previous use and handling. These products are subject to export restrictions ... moreunder U.S. law. Serial numbers or country of manufacture may vary.
Buy It Now
Free Shipping Condition: Used Location: Killeen, United States
Buy It Now
Free Shipping Condition: New Location: Valencia, United States
Buy It Now
$700.00 Shipping Condition: Used Location: Ventura, United States Click here to see description.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Tokyo Electron wafer indexer assembly is used, working surplus. It was removed from a P-8 automatic prober tool. System/Tool: P-8 Wafer Prober. Part ... moreNo: 200mm Wafer Indexer Assembly.
Buy It Now
Condition: For parts or not working Location: Gilroy, United States
Buy It Now
Free Shipping Condition: New – Open box Location: Albuquerque, United States They are in excellent physical condition. These products are subject to export restrictions under U.S. law. Sales Detail. Inventory # K-173. Female VCR ... moreInterfaces.
Buy It Now
Condition: For parts or not working Location: Singapore Model: 2001X. Make: Electroglas. Type: Wafer Prober. Vision Module PRM-2.
Buy It Now
Condition: Used Location: Freehold, United States Light tight enclosure for wafer probers. Easy lift front panel. Cable ports on both sides of box.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States Part No: FA1006K501A. Removed from a Tokyo Electron P-8 Wafer Prober. These products are subject to export restrictions under U.S. law.
Buy It Now
Condition: For parts or not working Location: Gilroy, United States This Signatone Wafer Prober features a 5" Vacuum Chuck, as shown. However, this is the extent of my testing of this prober, and it is being sold as-is.
Buy It Now
$11.00 Shipping Condition: New Location: Crystal Lake, United States Up for sale is a new and unused as I know it, sold as pictured, un tested and will be sold in new and working order featuring a GGB 18B-4-50 probe tip.
Buy It Now
$3000.00 Shipping Condition: Used Location: South Korea Cascade-Microtech Summit11000. Manual Wafer Prober for sale.
Buy It Now
$150.00 Shipping Condition: For parts or not working Location: Gilroy, United States This Micromanipulator 1800 Wafer Prober Probe Station features a 4.5" Temptronic Thermal Vacuum Chuck, and a pair of 3-Axis Micropositioning Probes, as ... moreshown. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States This Advanced Input Devices 9370-00769-101 is used working surplus. The physical condition is fair, but there are signs of previous use and handling. ... moreRemoved from a Electroglas 4085X Horizon 200mm Wafer Prober System.
Buy It Now
Condition: For parts or not working Location: Madison, United States Micromanipulator Co. Model 6000 Prober Wafer Probe Station. AS IS - has not been tested in-house. Includes the entire pictured assembly with pictured ... morecomponents.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Two CAP-3000 programmable probe manipulator with X-Y-Z resolution of better than 0.10 micron.
Buy It Now
Free Shipping Condition: Used Location: Albuquerque, United States The physical condition is good, but there are signs of previous use and handling. Model No: DP. These products are subject to export restrictions under ... moreU.S. law. Serial numbers or country of manufacture may vary.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Two CAP-3000 programmable probe manipulator with X-Y-Z resolution of better than 0.10 micron.
Buy It Now
Condition: Seller refurbished Location: Freehold, United States Cascade Microtech Summit 12000 200mm Prober with Attoguard Microchamber and -65°C to 200°C Shielded Chuck. Includes vibration isolation table built just ... morefor this type of prober. Easy to use graphical user interface guides you through prober tasks.
Buy It Now
$20.00 Shipping Condition: New Location: San Jose, United States C99729 Electroglas 266067-001 Rev. B RDC 8" Wafer Prober Gold Vacuum Hot Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) ... moreClick to Enlarge) Product ID# C99729 This Electroglas 266069-001 Rev. A 8" Wafer Gold Vacuum Hot Chuck looks to be in very good cosmetic condition. Possibly unused. However, I have no way of testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 11"L x 11"W x 3"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $22.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 5.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state tax rate applies. Or
Buy It Now
$700.00 Shipping Condition: For parts or not working Location: Ventura, United States Click here to see description.
Buy It Now
Condition: For parts or not working Location: Terryville, United States This manipulator was bought to mate with a AP3000E Wafer Probing Machine. Therefore it is being sold AS IS for parts. If you want to inspect the manipulator ... morein person, our warehouse is open 9-5, M-F during the week.
|
|
|
|
C99729 Electroglas 266067-001 Rev. B RDC 8" Wafer Prober Gold Vacuum Hot Chuck
C99729 Electroglas 266067-001 Rev. B RDC 8" Wafer Prober Gold Vacuum Hot Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C99729 This Electroglas 266069-001 Rev. A 8" Wafer Gold Vacuum Hot Chuck looks to be in very good cosmetic condition. Possibly unused. However, I have no way of testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 11"L x 11"W x 3"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $22.00(for DOMESTIC shipments only- 48 contiguous states excluding ... moreHawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 5.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa Clara County. The current basic state tax rate applies. Or
|
|
|
C100067 Electroglas 8" Wafer Prober Gold Vacuum Hot Chuck - P54
C100067 Electroglas 8" Wafer Prober Gold Vacuum Hot Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C100067 This Electroglas 8" Wafer Gold Vacuum Hot Chuck looks to be in good cosmetic condition. Showing some minor signs of wear. There are some minor scratches visible on the surface(please see photos above for detail) However, I have no way of testing it, and it is being sold as-is. I'm not sure what part number it is. The box that it came in does not have any labels on it. There is a sticker with"PU06051552" on the side of the gold chuck, and the cable has a label with the part number 253716-001D" on it, but I found that part number listed as a"Heater Element/Temperature Sensor Assembly. Approximate overall unpacked ... moredimensions: 14"L x 13"W x 4"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 5.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL
|
|
|
R100479-P54 Electroglas 2001X Automatic Wafer Prober System Manual Vol III #2
R100479-P54 Electroglas 2001X Automatic Wafer Prober System Manual Vol III#2(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# R100479 This Electroglas 2001X Automatic Wafer Prober System Manual Vol III#2 appears to be in good cosmetic condition with signs of prior use or wear. However. I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is. Please see photos for more detail. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos. It is not included. Unpacked dems are 13" x 12" x 04" Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. ... moreSee additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $22.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 10.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-t
|
|
|
R100525-P54 Electroglas PRM-3 Vision Module For Wafer Prober in Computer Rack
R100525-P54 Electroglas PRM-3 Vision Module For Wafer Prober in Computer Rack(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# R100525 This Electroglas PRM-3 Vision Module For Wafer Prober in Computer Tower Rack w/ Extras appears to be in fair cosmetic condition with signs of prior use or wear. It comes with everything shown. However. I lack the knowledge or equipment to test it, so due to no testing, it is being sold as-is as shown. Please see photos for more detail. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos. It is not included. The unpacked dems of this piece are 23" x 21" x 61" Please ask questions or indicate concerns prior to bidding. By placing a bid. You ... moreagree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 301.00 Pounds Buyer pays freight plus a fixed handling fee of $25.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date qu
|
|
|
C101148 PWS Pacific Western Systems P8AMS Probe II Station SemiAuto Wafer Prober
C101148 PWS Pacific Western Systems P8AMS Probe II Station SemiAuto Wafer Prober(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C101148 This Pacific Western Systems(PWS) model P8AMS Probe II Station Semi-Automatic Wafer Prober looks to be in good cosmetic condition. Showing some signs of wear. It features a Trio-Tech International Artic TC Temperature Controlled Chuck(8" Gold) a PWS Probe II Power Supply/Controller, and an EL-1302 Wafer Prober Drivers Unit with handheld controller. The chuck is mounted within a chamber, and the lid can be raised and lowered. The system powers up, and the stage moves around, and the system responds to input from the controls. When I pressed the start button, ... morethe stage started moving around automatically. I was also able to move it around manually using the manual control buttons and switches. The 2-Axis Positioning arch which moves over the probing chamber is controlled by the EL-1302 Drivers unit, and the handheld controller. It moves forward and back, and side to side. This is the extent of my testing of this probing system, and it is being sold as-is. Please see the photos above, and additional photos links below, for detail. Approximate overall unpacked dimensions: 38"L x 47"W x 58"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 561.00 Pounds Buyer pays freight plus a fixed handling fee of $30.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact
|
|
|
C97044 Signatone S-1160C-6 Wafer Prober Probe Station w/2 Micropositioner Probes
C97044 Signatone S-1160C-6 Wafer Prober Probe Station w/2 Micropositioner Probes(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C97044 This Signatone S-1160 Wafer Prober Probing Station features an Olympus SZ4045 Microscope Head and a pair of micropositioning probes. It does not include eyepieces for the microscope. Also. The probe station is missing the chuck. It looks to be in good cosmetic condition, showing some minor signs of wear. Sold as is. Approximate overall unpacked dimensions: 28"L x 22"W x 14"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated ... morein the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $0.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 95.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all
|
|
|
C97041 Rucker & Kolls R&K 691 Automatic Wafer Prober Probe Station w/ 6" Chuck
C97041 Rucker& Kolls R&K 691 Automatic Wafer Prober Probe Station w/ 6" Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C97041 This Rucker& Kolls model 691 Automatic Probe Station looks to be in good cosmetic condition. Showing some signs of wear. One of the stage positioning knobs has broken off(see photos for detail) The knob that rotates the stage is still good, but I'm not sure what the broken knob controls. The system powers up, and responds to input from the buttons. The four arrow keys on the right-hand control panel move the stage around, and you can adjust the distance of each step using the dials on the left-hand control panel. Also, the"Load/Clear" button ... morebrings the stage all the way forward, and the"Home" button centers the stage. However, this is the extent of my testing of it, and it is being sold as-is. If you would like me to perform any more tests on it, just email me instructions, and I will give it a try. It features a 6" Vacuum Chuck, a Mitutoyo WF Trinocular Microscope Head, and comes with a pair of Mitutoyo WF 10X/24 Eyepieces, a Mitutoyo Illuminator& Power Supply(it powers up and the intensity is adjustable) a Cohu 4815-5100/AL50 Solid State Camera, and a Rucker& Kolls 269-12 Probe Card Holder, as shown. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 0.00 Pounds Buyer pays freight plus a fixed handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on fre
|
|
|
C97023 Electroglas 3001X 8" Wafer Prober Probe Station
C97023 Electroglas 3001X 8" Wafer Prober Probe Station(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C97023 This Electroglas 3001X 8-inch Wafer Prober looks to be in decent cosmetic condition. Showing some signs of wear. I'm not sure how complete it is, but it comes as shown. It does not have a microscope, but it does have the 8-inch chuck. I have no way of testing this system, and it is being sold as-is. Approximate overall unpacked dimensions: 54"L x 38"W x 60"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item ... moredescription. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 1.412.00 Pounds Buyer pays freight plus a fixed handling fee of $25.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to re-quote the
|
|
|
C97048 Signatone S-1007S Wafer Prober Probe Station w/ 5" Vacuum Chuck
C97048 Signatone S-1007S Wafer Prober Probe Station w/ 5" Vacuum Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C97048 This Signatone S-1007S 5" Wafer Prober Probe Station is in good cosmetic condition. With some minor scratches and signs of use. I plugged it in, and it powered on and the lights on the buttons lit up. No further testing has been done. It comes with everything seen attached to it. The orange table that it is sitting on in the photos is not included. The wafer chuck in the center is 5” in Diameter. I do not have the tools or equipment to thoroughly test this item, so it is being sold as is. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold ... moreas advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 73.00 Pounds Buyer pays freight plus a fixed handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been recei
|
|
|
C101536-P54 Electroglas 266291-001D 12" Wafer Prober Nickel Thermal Vacuum Chuck
C101536-P54 Electroglas 266291-001D 12" Wafer Prober Nickel Thermal Vacuum Chuck(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C101536 This Electroglas 266291-001 Rev. D 12" Wafer Nickel Thermal Vacuum Chuck looks to be in good cosmetic condition. Showing some minor signs of wear. However, I have no way of testing it, and it is being sold as-is. Approximate overall unpacked dimensions: 17"L x 17"W x 3"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $46.00(for ... moreDOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 12.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales Tax For all California ship-to locations within Santa Clara County. Local sales tax applies. For all California ship-to locations out of Santa
|
|
|
C97050 Signatone S-250-5 Wafer Prober Probe Station w/ B&L Microzoom Microscope
C97050 Signatone S-250-5 Wafer Prober Probe Station w/ B&L Microzoom Microscope(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C97050 This Signatone S-250-5 Wafer Prober Probe Station looks to be in good cosmetic condition. With some minor scratches and signs of use. It features a B&L Microzoom Microscope body, but it is missing the microscope head. Also, it is missing the chuck. The U-Shaped metal piece has some spots on it I couldn’t get off. The only thing that didn’t seem to work was the Y axis control on the bottom right of the base. It comes with everything seen attached. Unfortunately I do not have the tools or equipment to test this unit, so it is being sold as is. Please ask questions or indicate concerns prior to bidding. By placing ... morea bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 149.00 Pounds Buyer pays freight plus a fixed handling fee of $20.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar da
|
|
|
Alessi Cascade REL-4100A Manual Wafer Probe Inspection Station: 6" Prober Chuck
Template By Froo! Alessi Cascade REL-4100A Manual Wafer Probe Inspection Station: 6" Prober Chuck· WHAT IS IT? This listing is for(1) used Alessi Cascade REL-4100A Manual Wafer Probe Inspection Station with the following: Alessi 6" Chuck and 3-way positioner inside dark box chamber(external dimensions are 39Dx37Wx35H. Internal platform is 24x30" Bausch& Lomb microscope with WF10X/21& 1X/20 eye pieces. Light source, and(4) objectives: 50X 0.45NA, 25X 0.31NA, 8X 0.15NA, 2.25X 0.04NA Panasonic WV-CL110 Color CCTV Camera(no power supply) and CT-1383 Monitor Picoprobe power supply/controller*This sale includes shown components ONLY. No other unseen parts or accessories will be included. DOES IT WORK? All mechanical components move freely and show no signs of abnormal wear& tear. The light source and monitor both ... morepower on but we do not have a power supply for the camera. We do not have the time. Equipment, or expertise to test it further. This means that it is being sold as-is. As-pictured with the assumption and understanding that additional calibration, parts or repairs may be required and should be expected. HOW’S IT LOOK? Fair. Some minor cosmetic scuffs or blemishes(see photos) CAN I RETURN IT? No. Returns will not be accepted for this item. Please as questions if needed and bid accordingly. Please read the terms below for more information on our store. Policies, and details specific to this listing. Join Our Tharitis Newsletter! Normal 0 false false false EN-US X-NONE X-NONE About Us Welcome to our online surplus outlet of used test& measurement equipment. Where our goal is to offer you the best prices on overstocked lab and manufacturing products. Our inventory changes daily, so please visit our store often. We pride ourselves in customer satisfaction. So please don't hesitate to contact us directly with your questions or concerns. We can be contacted Monday- Friday, 8am- 5pm PST at(760)806-6600. WE BUY SURPLUS TEST EQUIPMENT- MESSAGE US FOR DETAILS* Payment Our ordering s
|
|
|
TEL Tokyo Electron M8C30918-1 Optical Module P-8 Wafer Prober Used
This Tokyo Electron optical module is used surplus that was pulled from a larger tool. It is in very good physical condition. But may have some minor scratches from general use and handling. Part No: M8C30918-1 Sony Camera Part No: XC-75 Kowa Board Part No: GFZ-2163-10 Removed from Tokyo Electron P-8 Wafer Prober tool Condition: Working. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = 14"x14"x14" 10 lbs. Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number is not ... morenecessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 1 R0 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purchases in NEW MEXICO. A 8.8% Sales Tax applies to all purchases in ARIZONA. A 8.25% Sales Tax applies to all purchases in TEXAS. All items will be securely packaged or palletized and shipped
|
|
|
KLA Lightning 1201 Wafer Prober Stage Controller w/ 3 Cards
Just in from a local aerospace company sale comes this surplus KLA Lightning 1201 Wafer Prober Stage Controller w/ 3 Cards. STG.F, PRB.St, Micro, working pull All items with power cords are tested for simple power on only. It is presumed good( unless otherwise noted) but sold as shown and as-is. Paypal due immediately/ Local Pick-up available 8am-12noon weekdays from 91355/ 9% Calif. sales tax required WE SHIP FAST! Location/ warehouse 2 rolling cart.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-140421c1689-0x101-
|
|
|
C102840 Electroglas Horizon 4080X 8" Wafer Prober
C102840 Electroglas Horizon 4080X 8" Wafer Prober(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C102840 This Electroglas Horizon 4080X 8" Wafer Prober looks to be in good cosmetic condition. Showing some signs of wear. It powers up, and initialized, but eventually a box pops up on the screen, reading: Wafer on Tranfer Arm/ Please Remove the wafer from the transfer arm. I do not see an wafer inside the system, or on any of the arms. I hooked the system up to pressurized air, but I do not have a fitting compatible with the Vacuum In connector, so I was not able to apply a vacuum, so I'm wondering it that might have something to do with it. This is the extent of my testing of this system, ... moreand it is being sold as-is. It comes with an"EGCommander 6.0" Manual, and a"263425-001 Rev. D Tool Kit, MHN Set-Up 4090, as shown. Approximate overall unpacked dimensions: 39"L x 50"W x 68"H. A custom pallet or crate may be needed to ship this prober, the cost of which will be the responsibility of the buyer. Here are links to a few more pictures: Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 0.00 Pounds Buyer pays freight plus a fixed handling fee of $25.03(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip C
|
|
|
KARL SUSS PSM 6 6 Inch Precision Manual Submicron Analytical Wafer Prober
KARL SUSS- PSM 6 Inventory# 57362*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. 6 inch Precision Manual Submicron Analytical Wafer Prober. Platen accepts vacuum or magnetic base probe manipulators. For probing internal geometries on wafers or substrates up to 6 inch diameter on a 6 inch vacuum chuck. Manipulator controlled XY microscope movement and convenient microscope lift. Bausch and Lomb MicroZoom microscope with three long working distance objectives. Stage alignment mechanism securely holds an air supported wafer stage in X. Y and Theta.The stage moves effortlessly across a lapped granite base plate that can be quickly vacuum locked in test position. Can be sold in untested as-is condition. Or fully checked out and refurbished ... moreby one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com
|
|
|
KARL SUSS PM8 8 Inch Submicron Analytical Wafer Prober
KARL SUSS- PM8 Inventory# 58251*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. 8 inch Submicron Analytical Wafer Prober. Aluminum platen accepts vacuum probe manipulators. Not magnetic. provides the stability and resolution required for precise probe positioning. Submicron precision and stability. 8 inch diameter vacuum chuck. Mitutoyo microscope with long working distance objectives. Platen Z travel has 45mm of linear motion with a 400 micron contact/separation stroke. Fine glide chuck stage with 8 inch X-Y motion and automatic vacuum position lock. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact ... moreus directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any of your other equipment needs via eBay mail, directly at. Or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. Visit us on the web at: www.bidservice.com 7:ce.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*14%3E7%3Ace-140a57743f0-0xf4-
|
|
|
C103270 Mitutoyo Alessi New Wave Motorized Positioning Wafer Prober Microscope
C103270 Mitutoyo Alessi New Wave Motorized Positioning Wafer Prober Microscope(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C103270 This Mitutoyo 378-134-4 New Wave UV Motorized Positioning Microscope for an Alessi Wafer Prober looks to be in good cosmetic condition. Showing some signs of wear. All of the positioning mechanics seem to be in good shape when moved by hand. The bottom forward/back positioner can be disengaged from the positioning screw and motor. However, I do not have any way of power it up and formally testing the motorized positioners. It features a 4-objective lens turret, but it is missing the actual microscope head. It is being sold as-is. Approximate overall unpacked dimensions: 20"L x 11"W x 11"H. ... morePlease ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $60.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 39.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal pay
|
|
|
Ultracision 680E Semiautomatic Analytical Wafer Prober
Ultracision 680E Semiautomatic Analytical Wafer Prober Inventory# 58543*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Semiautomatic Analytical Wafer Prober. Probes wafers and substrates up to 150mm. Automatic Z control. Electronic inch/metric conversion in X-Y. Automatic die size measurement. Bausch& Lomb StereoZoom 7 microscope with illuminator. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases ... moreof this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
C90637 Cascade Microtech PS300 Parametric Serie 12" Automatic Wafer Prober
Click to Enlarge) Product ID# C90637 This Cascade Mirotech PS300 Parametric Serie 12" Automatic Wafer Prober looks to be in good cosmetic condition. Showing some signs of wear. Its power cord has five wires(three line wires, a neutral wire and a ground wire) but we do not have any five wire power outlets in our warehouse, so I have no way of powering it up or testing it, and it is being sold as-is. It comes with a Monitor/Keyboard/Joystick assembly, as shown, howevever I'm not sure where it is supposed to mount on the machines, and I'm not sure how to hook it up. This machine has a number of loose cables, which I'm not sure where they are supposed to plug into. Please see the photos above for detail. Approximate overall unpacked dimensions: 56"L x 54"W x 50"H. Please ask questions or indicate concerns prior ... moreto bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 1660 pounds Buyer pays freight plus a fixed handling fee of 30 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid fo
|
|
|
C89123 Rucker & Kolls R&K 1032 Wafer Prober Probe Station
Click to Enlarge) Product ID# C89123 This Rucker& Kolls R&K 1032 Wafer Prober Probe Station looks to be in decent cosmetic condition. Showing some signs of wear. I hooked it up to my air compressor, and powered it up, and the digital display comes on, but I could not get it to do much of anything. I pressed all of the buttons, but none of them had an effect, other than the"Lamp Override, which only made the"Lamp On" light illuminate. It is being sold as-is, for parts or repair. Approximate overall unpacked dimensions: 32"L x 29"W x 17"H. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping ... moreLTL Freight. The unpacked weight of this item is 172 pounds Buyer pays freight plus a fixed handling fee of 0 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Auction Ter
|
|
|
C97634 Lot 3 Micromanipulator 6000 Wafer Prober Probe Station (parts/repair)
Click to Enlarge) Product ID# C97634 This lot includes three Micromanipulator 6000 Wafer Prober/ Probe Stations. As shown. They are all in need of some work, and are being sold as-is, for parts or repair. One of them features a 5" Chuck, and the other two feature 4" Chucks, but the 5" one and one of the 4" ones are not secured in place. There are a variety of microscope parts also included, as shown. I have not evaluated the condition of the optics. No eyepieces or objectives are included. This lot includes everything shown in the photos above, so please see the pictures for details. If you do not see it in the photos, it is not included. Sold as-is. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, ... moreunless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 0 pounds Buyer pays freight plus a fixed handling fee of 40 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. W
|
|
|
M94654 KLA Instruments KLA1007-47 Semi-Automatic Wafer Prober System
Click to Enlarge) Product ID# M94654 This KLA Instruments KLA1007-47 Semi-Automatic Wafer Prober System appears to be in good cosmetic condition. With signs of wear and previous use. I connected the unit to power, unfortunately, the only response I received was a temporary sound from the power source(bottom right of the unit) as if it did want to turn on. The unit has a 6¼” gold chuck with three wafer lift needles. However I lack the knowledge and proper equipment needed to formally test this unit; therefore it will be sold as is. Please see pictures for more details) Approximate overall unpacked dimensions: 36"x40"x51" Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the ... moreitem description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 1246 pounds Buyer pays freight plus a fixed handling fee of 30 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to re-qu
|
|
|
A83467 Electroglas 2010CX Wafer Prober 6" w/ Optem Scope
Click to Enlarge) Product ID# A83467 This Electroglas 2010CX Wafer Prober 6" w/ Optem HF Video Microscope looks to be in good cosmetic condition with signs of wear and previous use. I only have what is shown in the pictures. And I really lack the knowledge and equipment to test properly, so it is being sold as-is. Unpacked dims are 53*43*60. See pictures for more details. If more are needed please feel free to e-mail. It features a 6 inch wafer chuck along with PPC Power Control. PRM-2 Vision Module, and RMHM2 Controller. Due to the size of this unit. A custom made pallet will be required to ship it. The cost of the pallet will be paid for by the winning bidder. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless ... moreotherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 1011 pounds Buyer pays freight plus a fixed handling fee of 25.02 dollars(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will exp
|
|
|
C82338 Electroglas 2001X 6" Wafer Prober Probe Station w/ WaferMap Software
Click to Enlarge) Product ID# C82338 This Electroglas 2001X 6" Wafer Prober looks to be in good cosmetic condition. Showing some minor signs of wear. The people that we got it from say it is in good working condition. It powers up, as shown in the photos above, and I was able to access for wafermap software and navigate thru various menus and displays. However, I lack the knowledge and equipment to formally test it, and it is being sold as-is. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms.All auctions are sold as advertised, as is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 0 pounds Buyer pays freight plus a fixed handling fee of 30 dollars(for DOMESTIC ... moreshipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight items. Winning bidders should contact us through eBay with their confirmed ship to address and details on the following: Company Name: Contact Person: Contact Phone Number: Ship to Address. City, State and Zip Code: Country: Business or Residential Delivery? Is there a Dock or Forklift available? Delivery Hours: Lift-gate Delivery required? Are there any delivery restrictions? Are we delivering to a University. Strip Mall or Inside Delivery? Freight quotes and charges will be billed within 3-5 business days of receipt of shipping details above(please note international freight quotes may take longer) Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this time frame. The rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Auction Terms. Upon end of auction. The winning bidder should proceed to"Check Out" and will be redirected to our Auction Checkout
|
|
|
ELECTROGLAS EG 4085X wafer probe or prober
We sell the ELECTROGLAS EG 4085X wafer probe or prober at fully refurbished.Complete,working condition to OEM spec. The system is in our Santa Clara facility. Lead time is 6 weeks against official PO and payment. The valid term is subject to sales.Please contact us for availability. Here is the configuration for the system for your reference.The actual configuration will be specified in our official quotation. Wafer Size Range: 200 mm Cassette to Cassette Temperature Control Chuck optional Automatic Alignment OCR Camera Weight: 850 lbs Installation with warranty is optional at extra cost. We also have the following.Please contact us for availability. EG 2001 probe* EG 4085 probe* EG 2080 probe* EG 2010 probe PLEASE NOTE: WE ARE SELLING ALL ITEMS AT"AS-IS" We have good source for the following used semiconductor equipment and New ... moreSemiconductor Equipment/ System. Please contact us by e-mail for more information.We will do our best to meet your budget. Rapid Thermal Process: AG Associates Heatpulse 610 | Heatpulse 410 | Heatpulse 210 Plasma Asher Descum: Matrix 105R | Matrix 105/205/106 | Branson IPC L3200 |Branson IPC 2000/3000/4000 | Gasonics L3510 | Gasonics Aura 1000 | Gasonics Aura 3010 | Gasonics Aura 2000LL Plasma Etch/RIE/ICP: Tegal 901e | Tegal 903e |Tegal 901e TTW | Tegal 903e TTW | Lam Rainbow 4420/4428 | Lam Rainbow 4520/4528 | Lam Rainbow 4620/4628 | Lam Rainbow 4720/4728 | Lam AutoEtch 490 | Lam AutoEtch 590 | Lam AutoEtch 690 | Lam AutoEtch 790 | Matrix 303 | Gasonics AE 2001 | STS Multiplex ICP Sputtering Deposition System: AccuSputter AW 4450 | Perkin Elmer 4450 Sputter | Perkin-Elmer 4410 | Perkin Elmer 2400 Sputter Systems Metrology and Tester: Tencor M-Gage 300 | Hitachi CD-SEM 8840 | Hitachi CD-SEM 8820 | Hitachi FE-SEM 4700 | Hitachi FE-SEM 4500 | HP 4062UX Tester | HP 4145A/B Tester | EG 2001 Wafer Probe | EG 1034 Wafer Probe Please Note: We do not arrange the shipment overseas. For international shipping. Please send us your account(FEDEX) or ask your forwarder to pick up the item
|
|
|
ELECTROGLAS EG 2080 wafer probe or prober
We sell the ELECTROGLAS EG 2080 wafer probe or prober at fully refurbished.Complete,working condition to OEM spec. The system is in our Santa Clara facility. Lead time is 4 weeks against official PO and payment. The valid term is subject to sales.Please contact us for availability. Here is the configuration for the system for your reference.The actual configuration will be specified in our official quotation. Wafer Size Range: 200 mm Cassette to Cassette Temperature Control Chuck optional Automatic Alignment OCR Camera Weight: 850 lbs Installation with warranty is optional at extra cost. We also have the following.Please contact us for availability. EG 2001 probe* EG 4085 probe* EG 2080 probe* EG 2010 probe PLEASE NOTE: WE ARE SELLING ALL ITEMS AT"AS-IS" We have good source for the following used semiconductor equipment and New ... moreSemiconductor Equipment/ System. Please contact us by e-mail for more information.We will do our best to meet your budget. Rapid Thermal Process: AG Associates Heatpulse 610 | Heatpulse 410 | Heatpulse 210 Plasma Asher Descum: Matrix 105R | Matrix 105/205/106 | Branson IPC L3200 |Branson IPC 2000/3000/4000 | Gasonics L3510 | Gasonics Aura 1000 | Gasonics Aura 3010 | Gasonics Aura 2000LL Plasma Etch/RIE/ICP: Tegal 901e | Tegal 903e |Tegal 901e TTW | Tegal 903e TTW | Lam Rainbow 4420/4428 | Lam Rainbow 4520/4528 | Lam Rainbow 4620/4628 | Lam Rainbow 4720/4728 | Lam AutoEtch 490 | Lam AutoEtch 590 | Lam AutoEtch 690 | Lam AutoEtch 790 | Matrix 303 | Gasonics AE 2001 | STS Multiplex ICP Sputtering Deposition System: AccuSputter AW 4450 | Perkin Elmer 4450 Sputter | Perkin-Elmer 4410 | Perkin Elmer 2400 Sputter Systems Metrology and Tester: Tencor M-Gage 300 | Hitachi CD-SEM 8840 | Hitachi CD-SEM 8820 | Hitachi FE-SEM 4700 | Hitachi FE-SEM 4500 | HP 4062UX Tester | HP 4145A/B Tester | EG 2001 Wafer Probe | EG 1034 Wafer Probe Please Note: We do not arrange the shipment overseas. For international shipping. Please send us your account(FEDEX) or ask your forwarder to pick up the items
|
|
|
Signatone S-1007 Wafer Probing Prober Probe w/ Joystick Chuck Movement
Fiber Optic Tools and Supplies BUY | SELL | TRADE surpluseq.com Description, Signatone S-1007 Wafer Probing Prober Probe w/ Joystick Chuck Movement Used Signatone 5" plate Product Type: Type@ Model/Part No:S-1007 Our Item ID: 252466 Description Specific Details: Actual item shown. Sold as pictured. This Signatone S-1007S Probe Station with 5 inch plate and joystick chuck movement. It looks like it is in good condition. With some minor scratches and signs of use. Controller is not included, and we are unable to test this item. Condition: Product Type: Used Terms of sales: Sold As-Is Physical Condition: Good Working Condition: N/A(Not Applicable) Tested Condition: Not Tested 100.00 | 26.00 x 26.00 x 24.00 | 0. Manufacturer"s Product Information: Description: Lever controlled linear platen lift, Manually controlled fast stage, 5 inch ... morediameter Vacuum Chuck, Platen for magnetic or vacuum prober/manipulators, Specific Details: | | | Contact, Mailing Address: SurplusEQ 329 W. Melinda Ln. Phoenix AZ 85027 U.S.A. Phone: Toll-Free: 623) 581-9777(877) 967-1904. Business Hours: 7:30am- 4:00pm(Arizona time) Monday to Friday Email: surpluseq.com View our other and. Payment, We accept the following forms of payment: Credit/Debit Cards: Accepted for USA and Canadian eBay transactions pursuant to our eBay Sales Policy* Cards accepted: Visa, MasterCard, Discover Card. And American Express. We may require shipping to the card holder's billing address and signed CC Authorization form. PayPal: Accepted for USA and Canadian transactions pursuant to our eBay Sales Policy* Shipping to a PayPal verified address may be required. Authorization for PayPal acceptance when the item is being shipped to outside of the U.S.A. at our discretion. Contact us with questions. Sales Tax: Arizona(AZ) sales tax in the amount of 8.3% is collected unless buyer provides a valid AZ Sales Tax Exemption Certificate prior to payment. Shipping, Use the shipping quote calculator supplied by eBay. Or contact us for a shipping qu
|
|
|
Wentworth Pegasus S200 Semi-Automatic 200mm Precision Wafer Prober
Wentworth Pegasus S200 Semi-Automatic 200mm Precision Wafer Prober Inventory# 58706*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Prober delivers rapid production probing of wafers up to 200mm. For semiconductors. MEMs and characterization applications, and is ideal for probing LED die mounted onto blue tape/ring carriers. Intuitive graphic user interface. PC controller. Chuck: 8 in. dia. Stage Travel: 210mm x 210mm. Resolution: 1.25 micrometers. Probing Speed: 95mm per sec. max. Indexable Range: 10 micrometeters to 210 millimeters. Chuck stage fine lift. Overtravel, overtravel indexable range and search window user programmable within 10mm total travel. Resolution: 1 micrometer. Has probe card holder. 100-260V. 1 Ph, 50/60 ... moreHz, CE. Very nice shape. Purchased by a company that never went into production. Like New. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
MICROMANIPULATOR 6640 200mm WAFER PROBER BASE
MICROMANIPULATOR 6640 Inventory# 58351*Item sold"as-is" condition. Not refurbished. 200mm Wafer Prober Base. System sold in"As Is" condition. Parts missing. No computer or microscope. 200mm Temptonics temperature chuck. But no controller. Sold in untested as-is condition. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value ... morefor our customers.
|
|
|
ELECTROGLAS HORIZON 4085X Automated Wafer Prober
ELECTROGLAS HORIZON 4085X Automated Wafer Prober Inventory# 41740*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. 8 inch automated prober. High volume cassette to cassette wafer prober. Pattern recognition system. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal unless special arrangements are made. Please contact us to discuss suitable ... morepayment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Micromanipulator 6000 Manual 100mm High Resolution Wafer Prober
Micromanipulator 6000 Manual 100mm High Resolution Wafer Prober Inventory# 58985*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. High resolution substrate probe station. 4 in. dia. chuck. 4 in. x 4 in. XY movement. Theta rotation. Platen accepts vacuum or magnetic base probe manipulators. Platen fast lift. Wild Stereo microscope. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs ... moreof the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Wafer Prober Dark Test Box
Wafer Prober Dark Test Box Inventory# 58554*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Wafer Prober Dark Test Box. Front doors open or system has hinge across the top and opens upward. Inside Dimensions: 30 in. L x 23 in. W x 21 in. H. Five BNC type connectors and a 3 in. feedthrough port. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. Please note: for purchases of this size. We are unable to accept credit cards or PayPal ... moreunless special arrangements are made. Please contact us to discuss suitable payment arrangements. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Electroglas Xynetics EG1034X Wafer Die Prober Probe Station 6"Chuck&Power Supply
Description: Here's an Electroglas Xynetics 1034X Prober and Power Supply. Comes from a working environment and was working well when obtained. Comes with cables. Had been connected to a camera system(please see this other listed item) and video monitor.This tool is designed to provide a high throughput capacity. It features a temptronics 6 inch gold thermal Chuck and Miller temperature controller. Buyer may pick this lot up or arrange for freighting. We can deliver within 100 miles from Ventura CA for a fee. We will also deliver within 100 miles from Las Vegas NV in Oct. Nov, Dec. Please contact for fees. Specifications: Die Prober Test Station Condition: Used Input Power: Volts: 115 Phase: 1 Hertz: 60 FLA: 6 PSI: 85. X-Y Travel: 6 inch probing. 5 inch load/unload Index Range: 0.0005 to 5.9999 in. Resolution: 0.005/0.00025 in. Accuracy: ... more+/ 0005 in. Repeatability: +/ 0001 in. Electrical: 110VAC. 60Hz, 1P Air: 2.5 cfm at 85 psi Vacuum: 18 to 25 inches Hg(457 to 635 mm) Dimensions(in.30"x28"x18" for Prober and 21"x14"x7" for Power Supply. Est. Weight: 300 lbs for Prober and 35 pounds for Power supply. The ELECTROGLAS Model 1034X Automatic Wafer Probe is a precision instrument for testing and classifying semiconductor devices in wafer form. The Model I034X is a self-nontained system comprising two modules. A probe module and a power module. Both modules are designed for compact bench-top mounting; however, an interconnecting cable permits remote mounting of the power module when desired. The ELECTROGLAS 1034X is designed for operational simplicity and fast wafer throughput. The unique ELECTROGLAS solid-state high-speed X-Y Positioning System permits simplified wafer loading and unloading outside the probe ring area with high-speed travel to and from the load position. Simplified manual and semi-automatic controls assure rapid wafer alignment by automatic gross positioning. Simplified theta alignment, and precise device alignment by use of a multi-function joystick that provides 20 d
|
|
|
TEL Tokyo Electron P-8I Fully Automatic Wafer Prober Tool P-8 Used Working
This Tokyo Electron P-8 wafer prober is used working surplus. The physical condition is good. But there are signs of previous use and handling. Part No: P-8I Model No: P-8 Date of Manufacture: April 1999 Rated Power Input: AC 200-240V. 50/60Hz, 1F, 1.5kVA, 7.5A Rated Breaker Input: 20A Ampere Interrupt Capability: 10kA Rated Maximum Motor: 100VAC. 50/60Hz, 1F, 200VA, 2.5A Air: 0.45~0.7MPa. 40 l/min Vacuum: 70kPa or less Reference Drawing: 3297-710008-21 Made in Japan Condition: Used Working. 90 Day Warranty Estimated Packed Shipping Dimensions: L x W x H = Requires Freight Shipping Notice Regarding Freight: Please wait for an invoice with actual shipping charges. PLEASE NOTE– INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES(See Details Below) Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not ... moreincluded in the sale. Pictured test equipment is not included or available for sale. For multiple listed items. The pictured serial number, date or country of manufacture is not necessarily the one that will be sent. 90-Day Satisfaction Guarantee(See Details Below) Lister 7 Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 5:00 pm(MST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: 8:30 am to 4:00 pm MST Monday to Friday Email Address: sales@usedeqsales.com Phone: 505-345-8732, Fax: 505-345-8730, Physical/Mailing Address: 4916 Hawkins Street. NE Albuquerque. New Mexico 87109 United States of America Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) We cannot process the order until we receive tax from the following states NM. AZ and TX or a copy of your State Nontaxable Transaction Certificate(NTTC) A 7% Sales Tax applies to all purch
|
|
|
ELECTROGLAS EG 1034 wafer probe or prober
We sell the ELECTROGLAS EG 1034 wafer probe or prober at fully refurbished.Complete,working condition to OEM spec. The system is in our Santa Clara facility. Lead time is 2 weeks against official PO and payment. The valid term is subject to sales.Please contact us for availability. Here is the configuration for the system for your reference.The actual configuration will be specified in our official quotation. The ELECTROGLAS Model 1034X Automatic Wafer Probe is a precision instrument for testing and classifying semiconductor devices in wafer form. The Model I034X is a self-nontained system comprising two modules. A probe module and a power module. Both modules are designed for compact bench-top mounting; however, an interconnecting cable permits remote mounting of the power module when desired. The ELECTROGLAS 1034X is designed for operational ... moresimplicity and fast wafer throughput. The unique ELECTROGLAS solid-state high-speed X-Y Positioning System permits simplified wafer loading and unloading outside the probe ring area with high-speed travel to and from the load position. Simplified manual and semi-automatic controls assure rapid wafer alignment by automatic gross positioning. Simplified theta alignment, and precise device alignment by use of a multi-function joystick that provides 20 different manual commands in a single control. The high-speed automatic probing cycle provides automatic indexing, probing and inking of all devices on the wafer under preprogrammed indexing control, and automatic return to the load position when probing is complete. The system accommodates up to 4-inch(102-mm) wafers and provides indexing in either English or Metric system units. Original Electroglas EG1034X Wafer Prober key features£º Direct computer control(if the SUPER D control module is used) Wafer Size Range: 3¡å- 6¡å X-Y stage travel: 150mm¡Á150mm Power supply: 110V/220V£¬50/60Hz Compressed air pressure: 80 psi Power consumption: Accuracy: À5¦Ìm Installation
|
|
|
MC Systems 8832 Wafer Prober Dark Box
MC Systems 8832 Wafer Prober Dark Box Inventory# 59374*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Outside Dimensions: 34 in. L x 28 in. W x 26 in. H. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to ... morevalue for our customers. g63.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3Eg63-149828f3178-0x116-
|
|
|
Xynetic Electroglas RMHM3 Wafer Prober Controller Module
Unit is used and untested. PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in specifications. Xynetic Electroglas RMHM3 Wafer Prober Controller Module Condition: Used Estimated Packed Shipping Weight: 30 lbs. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Lister: AD Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday. Email Address: Contact ... morevia eBay messaging system, Phone: 408-762-7281, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be securely packaged or palletized and shipped via the best and most economical way possible. We typically ship within 1 business day however. Under certain circumstances please allow up to 5 business days for handling; e.g. special freight crating as well as international orders. All tracking information is updated through eBay and posted on the buyers eBay account. Same Day Shipping Policy. Contact us before
|
|
|
TEL P-8 WAFER PROBER CARDS CAGE w/ Motorola MVME, KLA, TEL Modules Cards
TEL P-8 WAFER PROBER CARD CAGE SYSTEM Descriptions Used system. Good condition, pulled from a Tel P-8 wafer prober system working. Please look over in the 7 photos for more detail. 1) MOTOROLA MODULE CARD MVME 147-023(1) TEL MODULE CARD TVB0004-1/ 147CON. 3281-000013-16, TOSHIBA HARD DRIVE 352MB MK1824FBV HDD2522(1) KLA IP MODULE CARD 710-806050-01 REV D2(1) KLA DP MODULE CARD 710-806051-01 REV AO(1) MOTOROLA MODULE CARD MVME 316(2) TEL MODULE CARDS TVB6004-1 QMC3. 3281-001184-17(1) TEL MODULE CARD TVB3102-1 SIO. 3281-000014-15, 3208-000014-14(1) TEL MODULE CARD TVB3401-1 GPIB. 3281-000019-13, 3208-000019-12 Total 9 modules cards in cage Local pick up free Used system. picture shown. Warranty 14 days warranty Payment Paypal Cashier check Personal/Company check(Note: Personal/company check will be held 5-8 business days for clearance. If you ... morepreferred to pay by credit credit(VISA/MC) Please register with Paypal; for their FREE online payment service. 8.75% sales tax will be applied if you are a California resident. Shipping& Handling Buyer pays fix amount shipping cost $35 in the 48 states. Canada. Alaska and Hawaii pay actual shipping cost Terms Payments must be received within 7 business days after our confirmation was sent to all winning bidder. Refund full amount but not include the shipping cost. Buyer pay freight cost when return the item. Contact Business Hour: Monday- Friday 9:00am- 6:00pm PST
|
|
|
Micromanipulator 7000 Manual Analytical Wafer Prober
Micromanipulator 7000 Manual Analytical Wafer Prober Inventory# 59414*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Precision wafer probe station. Submicron resolution of movements. 6 in. 150mm vacuum chuck. Bausch& Lomb MicroZoom microscope with 5X. 8X and 25X objectives. Extremely fine probe platform lift controls are supplemented by a fast lift lever which raises optics as well. High precision manual X-Y stage controls allow micron by micron positioning while the two speed motorized push button controls facilitate rapid wafer scanning. Platen accepts vacuum or magnetic base probe manipulators. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right ... moreto return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Micromanipulator 6000 Manual Analytical Wafer Prober
Micromanipulator 6000 Manual Analytical Wafer Prober Inventory# 59438*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Manual wafer probe station. 4 in. dia. vacuum chuck. Platen accepts vacuum or magnetic base probe manipulators. Olympus microscope with 5X. 10X and 40X objectives. 0.3 microns per degree platen fine lift resolution. Platen fast lift with 3 locking positions. High resolution stage. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at ... morephone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
Micromanipulator 6000 High Resolution Manual Analytical Wafer Prober
Micromanipulator 6000 High Resolution Manual Analytical Wafer Prober Inventory# 59439*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Precision wafer probe station. Bausch& Lomb MicroZoom microscope with 3 long working distance objectives. 4 in. dia. vacuum chuck. Platen accepts vacuum or magnetic base probe manipulators. 0.3 microns per degree platen fine lift resolution. Platen fast lift with 3 locking positions. High resolution stage. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, ... moreor for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers.
|
|
|
ULTRACISION 880 8" Semi-Automatic Analytical Wafer Prober *NS3
ITresales2 Give us a call at(408) 210-2592 E-waste Recycle We will pay $10 each Un-wanted Computer. Reused Please contact us if you have IT. Test Equipment and Secmiconductor equipment for sell. Give us a call at(408) 210-2592 Store Categories, ITresales2 ULTRACISION 880 8" Semi-Automatic Analytical Wafer Prober*NS3*NS3 Condition This item was used and pulled from the working system. Though the unit is tested and is 100% functional. Description ULTRACISION 880 8" Semi-Automatic Analytical Wafer Prober*NS3 This unit is missing the microscop and maybe other parts. Otherwise the condition is looking very good! This unit is offer as is for part or repair. Term and policy is not apply(sales is final) Used Unit, Actual Pictures Payment ITresales2 Accepts VISA. MasterCard, American Express With Paypal only, Cashiers Checks, Company Checks ... moreand Personal check(Personal Check, Company Check will be held 5 business days) Taxes- United States States Rate California 8.25% Taxes- International Customs. Duties and taxes are due for any shipment sent by ITresales2 outside the United States. ITresales2 is required by law to provide an invoice with each package sent outside the United States. We cannot ship internationally as a gift. Please note your government will assess taxes. Customs and duties on top of the purchase price. We strongly recommend you check with your country’s customs office to determine what additional expenses might be incurred on purchase. We will not mark merchandise values below value or mark items as“gifts” Shipping Methods& Costs Buyer pay fix amount shipping cost $250 in the 48 states. Canada. Hawaii and Alaska pay the actual shipping cost. Shipping by Fedex. UPS and USPS. All purchases are fully insured and have tracking numbers. We will send you this number automatically via email once your package ships. Please note that orders paid via Credit Card can only be shipped to the billing address for the card. We only ship to Paypal confirmed addresses in the United States. Canada and the
|
|
|
TEL Tokyo Electron P-8, Fully Automated 8" Wafer Prober, P8, P-8I, 3280-001132
PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in description. Size: 8" Inch(200mm) Model No. P-8I. P8 Bridge Standard. Part No. 3280-001132. Condition: USED. PULLED FROM A WORKING ENVIRONMENT Estimated Packed Shipping Weight: 150 lbs. Unit will ship by freight Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Shipping Notice: Additional shipping charges may apply; pending location. Size and weight of the item(s) Lister: DL Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 4:00 pm(PST) ... moreMonday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday. Email Address: Please Use The eBay Messaging Service, Phone: 408-762-7286, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be securely packaged or palletized and shipped via the best and most economical way possible. We typically ship within 1 business day however. Under certain circumstances
|
|
|
TEL P-8XL Wafer Prober Camera Assy. 3387-002688-12
Up for sale is this Tel P8XL Camera Assembly. Tel p/n 3387-002688-12 In clean. Used condition, but not working and sold for parts or repair only. Please make an offer. No reasonable offers refused! Item will ship from our Boerne. Texas USA warehouse. Thanks for looking and happy bidding!
|
|
|
Micromanipulator 200mm Manual Analytical Wafer Prober
Micromanipulator 200mm Manual Analytical Wafer Prober Inventory# 59572*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. Manual wafer probe station. Micromanipulator system modified with a 200mm Rucker& Kolls gold plated chuck and stage with 200mm x 200mm stage travel. Bausch& Lomb MicroZoom microscope with 2.25X. 8X, 25X and 50X objectives. Platen accepts vacuum or magnetic base probe manipulators. Platen lift control. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including lead-time, or for any ... morequestions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Or contact a freight forwarder who can get you actual prices.
|
|
|
Cascade Microtech REL-4800 High Precision Manual Wafer Prober
Cascade Microtech REL-4800 High Precision Manual Wafer Prober with 300mm Temperature Chuck Inventory# 59585*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. System has a 12 in. gold plated temperature chuck but the stage X-Y movement is only 8 in. x 8 in. Temp. Range: 65 to +200 deg C. Submicron resolution and excellent stability. Platen position indicator. Platen accepts vacuum or magnetic base probe manipulator. Has probe card holder also. Mitutoyo microscope with long working distance objectives. 115V. 60 Hz, 20A. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please ... morecontact us for additional information on this system. Including lead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Or contact a freight forwarder who can get you actual prices.
|
|
|
Dymatix 880E 200mm Semiautomatic Wafer Prober
Dymatix 880E 200mm Semiautomatic Wafer Prober Inventory# 59548*Before purchasing this system. Please note that the refurbishment process does not begin until the equipment has been purchased. Please contact us for lead-time. 8 in. wafer probe station. X-Y stage accommodates up to 200mm substrates. Motorized Z. Manual theta control. Fluorescent display. Software control is menu-driven and has three modes of operation; auto. Manual and external. Also includes a diagnostic mode. Accommodates probe cards or probe manipulators. StereoZoom microscope. 110-220V. 60 Hz. Can be sold in untested as-is condition. Or fully checked out and refurbished by one of our technicians, with our standard right to return and 3 month parts warranty. Please contact us directly for as-is pricing. Please contact us for additional information on this system. Including ... morelead-time, or for any questions via eBay mail or at phone# 732) 863-9500. BID SERVICE has been meeting the equipment needs of the Semiconductor and Scientific communities for the past 30 years. Our expert refurbishing services. Demonstration capabilities, and broad selection of inventory add up to value for our customers. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Or contact a freight forwarder who can get you actual prices.
|
|
 |