|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Free Shipping Condition: Used Location: Royal Oak, United States Please MESSAGE ME before using buy it now. DON'T JUST HIT THE BUY IT NOW BUTTON.Fully tested and working. Bought from a tool and die shop whose owner ... moreis relocating. Machine is very clean with no issues. See video for readout of hours/minutes and cycles. Includes only power source, as shown in pictures. These machine last for ever and are easy to fix when they break. Free freight shipping to any commercial location in the US.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Tig Welder Torch Industrial Water Cooler Torch Welding Water Tank Chiller 110v. Water Capacity: About 10l. This Cooling Tank Is Designed for Use with ... moreTig Welders to Provide Powerful Cooling. 1 Welder Water Cooler.
Buy It Now
Free Shipping Condition: Seller refurbished Location: Royal Oak, United States COMPLETE KIT including water cooler, tig torch, ground clamp, 50ft power cable. and regulator. Totally turnkey. Points cleaned and adjusted. New NOVA ... moretig pedal.
Buy It Now
$108.29 Shipping Condition: Used Location: Attleboro, United States Miller CST 280 TIG AND STICK Welder Tig Welder 220v SINGLE PHASE AND 3 PHASE.
Buy It Now
Condition: Used Location: San Antonio, United States For Sale is a used Miller Syncrowave 200. This item was a demo machine and has only seen use on a few occasions. The torch collet. Collet body, tungsten, ... moreand cup have all been replaced. Here's what's included: Miller Sycrowave 200 AC/DC Tig Welder 907308 Weldcraft WP 17 Torch 15ft lead with 300 amp Electrode Holder Smith Inert gas Regulator RFCS-14-HD Foot Control-194 744. Hose for gas hookup Ground clamp and cable lead Power Cable Here are the Specs from Miller: TIG Welder. AC/DC, Phase 1, Output Range 5-200 Amps, Rated Output 150 A at 26 V, 150 A at 26 V Amps AC, Input 54 Amps, Input Voltage 208/230, OCV 80, 50/60 Hz, Includes Power Source, 8 Ft. Primary Cord, Rfcs-14 Remote Foot Pedal, 12-1/2 Ft Tig Torch, 15 Ft. Work Lead With Clamp, 15 Ft. Lead W/Electrode Holder, Flow Gauge Regulator With Hose And Cable And Foot Pedal Holders TIG/Stick Welding Packages200 SeriesFeature AC balance control, built-in pulse control, dual digital display meters, and Fan-On-Demand. Include power source, 8-ft. primary cord, remote foot pedal, 12-1/2-ft. Weldcraft TIG torch, 15-ft. work lead with clamp, 15-ft. lead with electrode holder, flow gauge regulator with hose, and cable and foot pedal holders. This item will ship via freight. Time varies based on location* Immediate PayPal payment required. No international Shipping and No Alaska/Hawaii.
Buy It Now
$88.46 Shipping Condition: New – Open box Location: Summers, United States UP FOR AUCTION IS A LIKE NEW Welder Was Used Once. Still In Mint Working Conditions 5-DAY AUCTION AT NO RESERVE Welder Is Not Reconditioned Or Refurbished ... moreDESCRIPTION Miller Maxstar® 150 STL TIG welder provides maximum portability and performance in the most compact TIG/Stick package in the industry. Dependability and performance all in one machine. Processes Lift Arc™ DC TIG(GTAW) Stick(SMAW) Applications Light Industrial Applications Maintenance and Repair Steel Erection Mechanical Contractors Dairy Industry Food/Beverage Industry Experimental Aircraf Included: Stick Electrode Holder. Work Clamp, Strap& Power Cord(ALL PICTURED IS INCLUDED) NO RESERVE ON THIS ITEM. SORRY! NO LOCAL PICK UPS SHIPPING AND HANDLING FOR THIS ITEM ANYWHERE IN THE LOWER 48 CONTINENTAL STATES IN THE USA WILL BE $ 38.00 THANKS AND PLEASE TAKE A LOOK AT ALL MY OTHER ITEM.
$37.95 Shipping Condition: New – Open box Location: United States Model: 907710001. Box has sticker removal marks tears and dents. Manufacturer: Miller. Miller Electric. Bin Location:706-094B. The case has minor scratches ... moreand razor cuts. See photos. Item Condition: New – Open box.
Buy It Now
$85.00 Shipping Condition: Used Location: United States This Miller Electric Maxstar 200 DX TIG welder is up for sale. It's a heavy-duty welding machine that supports both AC and DC polarity. The welding process ... moreused is TIG and it's suitable for industrial purposes.
Buy It Now
Condition: Used Location: Exeter, United States Miller Dynasty DX-300 AC/DC TIG WELDER This item is a complete set. Ready to weld when received. The only thing that doesn't come with it. Is the ... moregas and electrical power source. Miller Dynasty Comes with the following: Flow meter(NEW) Gas Hose( New) Ground cable and clamp(NEW) 17/12ftR Tig Torch(NEW) AK-2 TIG Torch kit(NEW) Foot control(NEW) Specifications Rated Output AC DC Volts 30 28 Amperes 250 200 D uty Cycle 40% 40% Max OCV 90 90 Input Volts 230/460 Hertz60 Phase KW Amperes 1 10.4 62.6/32.2 3 10.5 26.3/17.9. Amperage Range(5-300) Serial Number# KJ096837. Stock Number# 903519-01-1. ANY QUESTIONS ABOUT THE MILLER DYNASTY CALL GARY 216-905-9353)
Buy It Now
Condition: Used Location: Centerview, United States Includes MIller mig gun, Flex TIg gun & pedal, and 2 regulators (one is missing gauge lenses).
Buy It Now
$50.00 Shipping Condition: Used Location: Houston, United States In perfect working conditions,expect scratches and normal use,these welders have a buzzing noise it is totally normal I have sold a few like that.great ... morelittle welder you can plug it to 110V up to 460V single or three phase,15% restocking fee on returns,no returns if security label is broken or tampered with.,I have 2 welders first buyer chooses number 1 or 2 lasts 5 pictures are from number 2 thanks again NO LEADS OR TIG TORCH INCLUDED JUST THE WELDER
Buy It Now
Free Shipping Condition: Used Location: Bismarck, United States UP FOR AUCTION IS A LIKE NEW Welder Was Used Once. Still In Mint Working Conditions 5-DAY AUCTION AT NO RESERVE Welder Is Not Reconditioned Or Refurbished ... moreDESCRIPTION Miller Maxstar® 150 STL TIG welder provides maximum portability and performance in the most compact TIG/Stick package in the industry. Dependability and performance all in one machine. Processes Lift Arc™ DC TIG(GTAW) Stick(SMAW) Applications Light Industrial Applications Maintenance and Repair Steel Erection Mechanical Contractors Dairy Industry Food/Beverage Industry Experimental Aircraf Included: Stick Electrode Holder. Work Clamp, Strap& Power Cord(ALL PICTURED IS INCLUDED) NO RESERVE ON THIS ITEM. SORRY! NO LOCAL PICK UPS SHIPPING AND HANDLING FOR THIS ITEM ANYWHERE IN THE LOWER 48 CONTINENTAL STATES IN THE USA WILL BE $ 38.00 THANKS AND PLEASE TAKE A LOOK AT ALL MY OTHER ITEM.
Buy It Now
$4.13 Shipping Condition: New – Open box Location: Newport News, United States Miller Welcraft WP 17 Rigid Tig Torch 150 Amp. open box new stock, box has wear
Buy It Now
$21.23 Shipping Condition: New Location: Malden, United States MILLER ELECTRIC WP-17-12-R Weldcraft Air-Cooled TIG Torch Kit. Condition is New. Shipped with USPS Ground Advantage.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Function parameter: Power supply voltage: 110V/60HZ Phase number: single phase Heat dissipation: 1.5KW (1L/MIN) Pump power: 370W Maximum pressure / lift: ... more0.35MPA/60HZ Water capacity: about 10L Operating temperature: -20 ° C ~ 60 ° C Weight: 17KG Dimensions (mm): 456 × 253 × 328 Packaging includes 1 * welder water cooler 1* water pipe 1* inlet connector 1* socket connector 1* manual.
Buy It Now
$17.50 Shipping Condition: New Location: Los Angeles, United States WP-18SC25WC TIG TORCH WATER COOLED - 400 AMP. 25 Ft Long Great Quality with Nylon Cover Will ship Ups ground to the lower 48 onlyCondition is "New".
Buy It Now
Free Shipping Condition: New Location: Saylorsburg, United States When comparing prices. Note shipping insurance is included on shipments in the US and we ship priority mail or UPS. Not parcel post! If you want a shipping ... morediscount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments for each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! For Sale is a premium quality HTP 20 series water cooled Tig Torch designed to fit Miller welders with the 5/8-18 RH Female gas fittings and a ½” twist lock dinse connector. Some examples of this would be a Miller Dynasty 200. Dynasty 300, Dynasty 350, Syncrowave 250DX, and Syncrowave 350LX. This is a complete torch package which includes our water-cooled dinse connector equivalent to Miller p/n 195 377(you will pay $45 for this connector alone! A leather outer cover(another $25 option) our tool-less torch head, and super flexible color coded cables. Once you weld with these super flexible cables you will never go back to a conventional tig torch again. We will put this torch against a Weldcraft WP-20 any day. The torch is made in the USA. 25 feet long, and has a 100% duty cycle at 250 amps. This is the same high quality tig torch which is used on the HTP Invertig 221(our version of a Dynasty 200) which has a 90 day moneyback guarantee- we would not put a low quality tig torch on an expensive tig welder with a moneyback guarantee. The torch includes a long back cap as pictured. Collets. Collet bodies and alumina cups are to be purchased separately. Save even more– Mig. Tig and Plasma parts ship FREE with this tig torch. That is right. Any Mig, Tig, or Plasma part which ships priority mail for $5.95 ships for only the shipping cost of the tig torch. Save on shippi
Buy It Now
$16.95 Shipping Condition: New Location: West Covina, United States This Miller Welding WP-26FV-25-R Weldcraft 200amp TIG Torch is a top-of-the-line welding accessory made in the United States. With its air-cooled design, ... moreit provides a steady and reliable performance for any welding task. Its 25-foot length provides a comfortable working distance, giving you better control over your welding.The unit type is a unit, and the item type is an air-cooled TIG Torch. It comes with a unit quantity of one and is perfect for any welding enthusiast or professional. The brand is Miller, a trusted name in the welding industry. This TIG torch is perfect for use with welders, cutters, and torches.
$132.66 Shipping Condition: For parts or not working Location: Dayton, United States This Miller XMT350 Autoline welder is a versatile machine that can handle a variety of welding processes, including MIG, Tig, and stick welding. With ... morea voltage of 220 V, it's a powerful tool that is perfect for both industrial and personal use. The brand Miller is known for their high-quality welding equipment, making this MIG welder a reliable and durable choice for any welding project. This welder is ideal for those looking for a machine that can handle a range of welding processes without compromising on quality. It's suitable for both professionals and DIY enthusiasts, making it a valuable addition to any workshop. With its user-friendly interface, this Miller XMT350 Autoline welder is easy to operate, even for those new to welding.
Buy It Now
Free Shipping Condition: Used Location: Summit Argo, United States Lightly used in new condition Miller Maxstar 161 welders. (1)Maxstar 161 STL power source. The Maxstar 161 STL units are DC only and will not TIG weld ... morealuminum. now have a digital interface and feature a greater amperage range than their predecessor Maxstar 150 units.
$82.30 Shipping Condition: New – Open box Location: Jefferson City, United States You are bidding on a Miller HF251D-1 Hi-Frequency arc starter and stabilizer in excellent condition. Thoroughly tested and ready for tig welding. Winning ... morebidder pays flat rate shipping of $40.00 to the continental U.S. only.
Buy It Now
Free Shipping Condition: Used Location: Houston, United States Welder was tested to insure it is working properly. Sale is for the welder and power cable only, nothing more. Miller dynasty 200DX in working conditon. ... moreProduct integrity is our most important value with each of our products.
$15.95 Shipping Condition: Used Location: Boaz, United States The rig is used and shows some wear but still appears to be in good working condition. Shipping international will be additional cost.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States For sale is a premium quality CK Worldwide 20 series water cooled Tig Torch designed to fit the Miller Sycrowave 250 which uses the 45V11 power cable ... moreadapter (not included) to connect the power cable of the torch to the welder.
Buy It Now
$650.00 Shipping Condition: Used Location: Valencia, United States Excellent working condition. Free local pick up in Valencia ca 91355Or freight shipping on pallet wrapped, strapped a secured for flat cost of $650 to ... morebusiness location
Buy It Now
Free Shipping Condition: New Location: San Juan Capistrano, United States For miller tig welders with #14 pin connector.
Buy It Now
Free Shipping Condition: New Location: Daly City, United States This foot pedal is used on Miller Tig welders like the Econotig, Syncrowave 180, 200, and 250 welders, as well as they Dynasty 200dx. This foot pedal ... moreis used on any Miller solid state power source with serial number JK 674521 and higher using a 14 pin connector.
Buy It Now
$18.43 Shipping Condition: New – Open box Location: Venice, United States Miller Weldcraft. TIG Welding Torch. Torch Length 25 ft. Torch Type Air Cooled. NEW-OPEN BOX. Includes only the accessories you see in photos. WARRANTY ... moreNOT INCLUDED. SOLD AS IS.
Buy It Now
Condition: Used Location: New Philadelphia, United States This is a Miller Syncrowave 180 SD, single phase, 230 volts, that comes with leads, hose, foot control and cart, plus a spare unit that has a bad circuit ... moreboard in it. No extra leads or hoses with the parts unit, what you see in all the pictures is what you get. No tank or guages either. I will deliver if you are within 50 miles of here, and you have to have a way to get them off the pickup, and follow through with the deal once I arrive. If you are farther away than 50 miles you have to come here and pick it up. No shipping if you are farther away than 50 miles.
Buy It Now
$125.44 Shipping Condition: Used Location: Greensboro, United States SquareTrade © AP6.0 Untitled Document BRAND NEW MILLER SYNCROWAVE 350LX TIG RUNNER SYSTEM WITH NEW 3X COOLER IN THE RUNNING GEAR AND TORCH. 951119*Syncrowave ... more350 LX Base Unit: Syncrowave 350 LX power source only* International-style connection kit(195 303) Syncrowave 350 LX TIGRunner: Includes the above PLUS: No. 37 Running Gear* Remote Foot Control* Completely Assembled*Syncrowave 350 LX TIGRunner with Torch Package: Includes the above TIGRunner Package completely assembled PLUS: Water-cooled Weldcraft torch* Work clamp* 10 ft gas hose* Smith Regulator/flowmeter* Cable cover* COOLANT Not rebuilt. Not reconditioned, brand new, shipped direct from Miller or Indiana Oxygen Co, at sellers desecration. THIS WELDER IS USUALLY SHIPPED DIRECT FROM INDIANA OXYGEN CO. OR MAY BE SHIPPED DIRECT FROM NEAREST MILLER ELECTRIC WAREHOUSE ON A SEMI TRUCK. WE NEED GOOD DAYTIME PHONE NUMBER SO TRUCKING CO. CAN CALL AND SET DELIVERY APPOINTMENT AS SOMEONE MUST BE THERE TO UNLOAD. ARRANGEMENTS CAN BE MADE TO PICK UP AT NEAREST TERMINAL-HOWEVER WE CANNOT GUARANTEE HOW CLOSE THAT WILL BE. WE ALSO SHIP TO UNCONFIRMED ADDRESS'S IF YOU WANT TO SHIP TO A BUSINESS NEAR YOU WITH A DOCK OR FORKLIFT. WE DO NOT PROVIDE LIFT GATE SERVICE. Comes with full 3 year factory warranty. Master craftsman's choice- Syncrowave 350 LX provides a stable low-end output for intricate applications and the capability to ensure you have enough power for those heavy demands. $ 8704.00.00 List Price(US$) TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Industrial to Heavy Industrial Applications* Precision Metal Fabrication* Maintenance and Repair* Light Manufacturing* Heavy Manufacturing. Aerospace* Shipbuilding* Tube and Pipe* Vocational Input Power* Requires 1-Phase Power Rated Output* 350 A at 34 VAC. 40% Duty Cycle* 300 A at 32 VAC. 60% Duty Cycle Welding Amperage Range* 3- 400 Amps Net Weight* 643 lb(225 kg) Syncrowave 350 LX Base Unit: Syncrowave 350 LX power source only* International-style connection kit(1
Buy It Now
Condition: For parts or not working Location: Fort Pierce, United States This is a Miller Dynasty 300DX. Nice shape. I have had this a few years and haven't used it. It has 2000 hrs, powers up control panel works, no errors. ... moreWas guaranteed to work when I got it, but i have never used it. I am selling as is with no warranties. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Free Shipping Condition: New Location: Saylorsburg, United States Excellent Quality Foot pedal Includes 25 ft (8 m) cord and 14 pin plug, Miller styleMiller RFCS-14This is a replacement for the Miller RFCS-14 (Miller ... moreP/N 043 554) and the Miller RFCS-14HD (Miller P/N 194 744). This foot pedal is used on Miller Tig welders like the Econotig, Syncrowave 180, 200, and 250 welders, as well as they Dynasty 200dx. This Coplay Norstar foot pedal is used on any Miller solid state power source with serial number JK 674521 and higher using a 14 pin connector!Also used for the T200 Norstar welder!.
Buy It Now
$400.00 Shipping Condition: Used Location: Mims, United States Welder is good condition. Has a water cooler,cool mate 1, and new water cooled Tig torch. Electrode stinger, ground cord, foot control. Has power cords ... morefor 120 volt 240 volt single phase and also 220 3 phase power cord, welder will run on either single or three phase. Cart is included, welder has no problems stick and tig welds great. Welds aluminum very good has a pulse option. Owners manuals included. Buyer is responsible for shipping cost, will box& crate for free. Will also ship in 3 parts welder, cooler, cart.
Buy It Now
$12.00 Shipping Condition: New – Open box Location: Twin Lake, United States This is a MILLER WELDCRAFT WP17 Tig Torch Kit with the Braided mono hose and . Torch is new/never used. Comes as shown with hose, head, and tip/cap. If ... morepurchased and paid for before 2pm EST will ship the same day. Shipping within the 48 continental United States will be $12 or if you are local in the west Michigan area you are welcome to pick up your purchase in person to save shipping expenses. Thank you for your interest.
$4.43 Shipping Condition: New – Open box Location: Lebanon, United States TIG Starter Package includes: Recommended for Dynasty 350 Weldcraft CS310 Torch 25-foot water-cooled TIG Torch Torch cable cover CS310AK torch accessory ... morekit includes shielding cups.Collets,collet bodies and 2% cerium tungsten electrodes(1/16, 3/32, and 1/8 in) Smith Argon Flowmeter/Regulator with Hose HM2051A-580 12' Ground Cable and Clamp 1/0 work lead w/clamp and Dinse connector 12 foot rubber gas hose( regulator to machine Water cooled dinse torch adapter
Buy It Now
$300.00 Shipping Condition: Used Location: Mequon, United States Miller Dynasty 350. Machine Only Miller Part Number 907 204 Serial Number MA460348L Auto-Line models allows for any input voltage hook-up with no manual ... morelinking. Providing convenience at any job site. Includes features such as Lift-Arc. And Hot Start, 120V auxiliary power receptacle for water cooling systems or small tools, and program memory that allows up to nine program saves for your parameter settings. This is a factory reconditioned unit that comes with the machine. Power cord(no plug) dinse connectors, and set-up DVD This welder carries a two year factory warranty. We offer a discount on the shipping. Just e-mail us your zip code and indicate whether there is a forklift available to unload this machine. We are a welding supply company in Phoenix. AZ and have been selling new/ used welders and all of your welding supply needs for over 45 years. If you have any questions on this or any other welder. Just give us a call Jodi 602 252-0341 or 602 396-1178 John 602 206-0571
Buy It Now
$93.33 Shipping Condition: Used Location: Ashburn, United States Miller CST 282 208-575V, Stick And Tig Welder Auto Line Unit Is In Good Condition Does Not Have Excessive Use Comes As Seen In Pictures. Welder Is In ... morePerfect Working Order.No Leads..Newer Model
Buy It Now
Free Shipping Condition: Used Location: Sardinia, United States If you have any problems with this item, it is covered by our 30 day return policy,please contact me if you are not satisfied with your item because 100% ... morecustomer satisfaction is our top priority.Check out our store for more deals and feel free to ask any questions you may have.Thank you for looking at our listing.**************************************************If you have any questions or problems with this unit please contact us. Thank you.**************************************************NOTICE:if you have Alaska or Hawaii address please contact us for a shipping quoteWarehouse Shelf 4CBR
Buy It Now
Free Shipping Condition: New Location: United States MILLER ELECTRIC SYNCROWAVE 250 DX WELDING MACHINE PACKAGE GREAT TIG WELDING MACHINE ALSO WILL STICK WELD COMES COMPLETE WITH BUILT IN WATER COOLER. TIG ... moreTORCH, GROUND CLAMP AND CABLE ASSEMBLY, RUNNING GEAR. WITH POWER FACTOR CORRECTION IMPUT VOLTAGE IS 200/230/ OR 460 VOLTS SINGLE PHASE GUARANTEED TO BE A GOOD WORKING MACHINE WE WILL ADD MORE PICTURES.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1477a734c4c-0x118-
Buy It Now
Condition: New – Open box Location: Gilroy, United States NEVER USED Miller TIG welder: Dynasty 200 DX with Coolmate, Cart, full argon bottle, torch, heavy-duty pedal control by SSC Controls (Ohio), HTP Pyrex ... morecups and welding accessories, original container of coolant (never installed). This has been sitting in my garage since new. Miller is the finest welder you can buy--and it's made in USA. This is far below retail. PICKUP ONLY!
Buy It Now
Free Shipping Condition: New – Open box Location: Newport News, United States Miller tig torch WP 24 F 80 AMP. This torch requires a screw on handle not included. comes with peanut cup .gas filter .collet and insulator
Buy It Now
$125.00 Shipping Condition: Seller refurbished Location: Spencerport, United States This Miller Multimatic 220 AC/DC Mig,Tig,Stick Multiprocess Welder 907757 is a versatile tool for welding inverter. With a 360 degree rotation angle, ... moreit allows for easy maneuverability during use. The unit quantity is one, making it a perfect addition to any welding kit.
Buy It Now
Free Shipping Condition: Used Location: Efland, United States Miller Electric WP-18-25-R Tig Torch Kit, Weldcraft W-350 SeriesUsed, in good working condition, as shown in pictures. No back cap.Please reach out if ... moreyou have any questions or need additional information/pictures. Happy to accommodate local pickup near zip code 27243 or arrange different shipping options as needed, domestic or international. Thanks!Please see my other listings for similar items, I’ll happily consider offers on multiple items shipped to the same address. https://www.ebay.com/sch/i.html?sid=warstarter23Details From Retailers:(please refer to picture or ask questions as needed, I believe the below information to be accurate, but have not confirmed)Additional Keywords:
Buy It Now
$6.16 Shipping Condition: New Location: Jackson Center, United States New Miller Deversion 165 Wrapped Air Cooled Tig Welder Torch.
Buy It Now
$64.40 Shipping Condition: Used Location: Los Lunas, United States It is designed for easy use and provides a stable arc that ensures precision and accuracy in your welding tasks. Invest in this top-quality welding accessory ... moreand take your welding skills to the next level.
Buy It Now
$79.99 Shipping Condition: For parts or not working Location: Baton Rouge, United States
Buy It Now
$300.00 Shipping Condition: Seller refurbished Location: Spencerport, United States Made in the United States, this welding machine is designed to handle various welding jobs, from TIG to Stick welding.
Buy It Now
Free Shipping Condition: New Location: Winona, United States Miller Electric Part # WP2025RM. • Hand-Held Water-Cooled TIG Welding Torch. Torch Style: Standard. Torch Series: W-250. Cable Type: 3-Piece Braided Rubber. ... moreAmperage: 250 Amp. Rated Output: DC: 250 A, AC: 180 A.
Buy It Now
$115.00 Shipping Condition: Used Location: Houston, United States SquareTrade © AP6.0 Untitled Document Miller Maxstar 200 STR 907036 Stick& Tig Welder BRAND NEW Miller Maxstar 200 STR 907036 Stick& Tig ... moreWelder. For Stick and Tig. Leads or tig kits must be added. This listing for Power Source only. Not rebuilt. Not reconditioned, brand new, shipped direct from Indiana Oxygen Co. FREE GROUND SHIPPING TO ANY OF THE CONTINENTAL 48 STATES. Unit provides maximum flexibility by automatically connecting to any input power while maintaining the best DC Stick welding performance in its product class. Base Model Starting at: List Price(US$) Stick(SMAW) TIG(GTAW) Industrial Applications Mechanical Contractors, Process Plant Piping, Maintenance and Repair, Shipboard Installation/Repair, Petro/Chem Fabrication, Mining, Input Power 3-Phase or 1-Phase Power, Rated Output Stick: 150 A at 26 V. 60% Duty Cycle(1 or 3 Phase) Stick: 125 A at 25 V. 50% Duty Cycle(1-Phase) Stick: 90 A at 24 V. 100% Duty Cycle(1-Phase) TIG: 175 A at 17 V. 60% Duty Cycle(1 or 3 Phase) TIG: 150 A at 16 V. 70% Duty Cycle(1-Phase) TIG: 110 A at 15 V. 100% Duty Cycle(1-Phase) Welding Amperage Range 1- 200 Amps, Net Weight 32 lb(14.5 kg) Power source, 2) International-style connectors 35/50 are included. Product Literature(PDF) Provides state-of-the-art flexibility by automatically connecting to 120-460 VAC. Single- or three- phase power without removing the covers to relink the power source. Low OCV Stick reduces open-circuit voltage to 9-14 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Superior Stick arc performance on all input voltages. Even on the difficult to run electrodes like E6010. Portable in shop or at job site- at 32lb the Maxstar 200 STR is easily moved from location to location. Adaptive Hot Start for Stick arc starts automatically increases output amperage at start of weld should the start require it. Prevents electrode from sticking and creating an inclusion. start for TIG arc starts without the use of high f
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States The Miller Classic TIG gloves feature a sheep grain palm, cow split back, and pig split cuff. Miller's classic series gloves are a traditional glove design ... moretaken to the next level, amplifying fit and comfort at a cost-effective price.
Buy It Now
$12.00 Shipping Condition: Seller refurbished Location: Mont Belvieu, United States New SSC Controls TIG welding foot control for Miller welders direct from the manufacturer. This unit may have minor paint imperfections. But is new fully ... morefunctional. This is our model C810-1425, which is an exact cross to the Miller RFCS-14. The differences: Our case is drawn steel with powder paint; theirs is plastic with a steel bottom plate. Our pedal is wider and lower than Miller's. They use a belt drive inside the pedal; we use a DuPont Delrin rack on a machined brass pinion. We use the same components from the same manufacturers to control the arc, so electrically the pedals are exactly the same. SSC Controls Company is the nation's largest manufacturer of welding foot controls. We also make a full line of industrial foot switches. Design and Quality: Rated to a million cycles. Designed and manufactured in the USA under an ISO 9001-certified quality system. One-year warranty on parts and labor. 30-day money back guarantee. Features: Tough steel case. Wide top traction area and low profile. 25-foot cable. Our unique patented design provides excellent low-amp control(U.S. Pat. 5.535,642) Compatibility: Works with all Miller welders that have a 14-pin remote connector. Replaces Miller model RFCS-14(part#043-554) and RFCS-14HD(194-744) See our website for a complete list of compatible welders: Our list price for this pedal is $224.00. We also make pedals for other Millers. ESAB, Linde, Hobart, and Airco. Payment by check, money order, or credit card(call with your card info after buying) Attention if you do not live in the United States: Please be aware that your country may impose tarrifs. Taxes, etc. and that you may be charged a processing fee by your shipper if it's not the post office(like UPS) We cannot control, predict, calculate, or be responsible for these fees. If you have any questions. Call Jim or Brent at 1-440-205-1600. 5=2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B2d71f%2B%3E5%3D2-13df574cc06-0x100-
Buy It Now
Free Shipping Condition: New Location: Indianapolis, United States The Miller Classic TIG gloves feature a sheep grain palm, cow split back, and pig split cuff. Miller's classic series gloves are a traditional glove design ... moretaken to the next level, amplifying fit and comfort at a cost-effective price.
Buy It Now
Free Shipping Condition: New – Open box Location: Effingham, United States This Weldcraft Air-Cooled TIG Torch Kit from Miller Electric, with model number WP-26FV-25-R, is a great addition to your welding equipment. It is specifically ... moredesigned for TIG welding and features a 25-foot cable for easy maneuverability. The kit is brand new and comes in an open box.The torch is compatible with various TIG welders and has a durable construction that ensures long-lasting usage. It is ideal for use in the welding and soldering industry and is suitable for both professional and personal use. Get your hands on this high-quality TIG Torch Kit today and take your welding experience to the next level!
Buy It Now
Free Shipping Condition: Used Location: Elsah, United States Used - In good working condition. Used very little.
Buy It Now
Free Shipping Condition: Used Location: Saddle Brook, United States Very good condition. working good. check all the photos.
$50.87 Shipping Condition: Used Location: Fort Lauderdale, United States Miller intellitig 40Allows you to program any tig welder for various welding procedures such as pulse control and control the speed of a positioner and ... moresave your preset modesWorked great last time it was used about a year ago at a welding schoolBeen stored safe in my A/c'd warehouse Plugged it in and it turns on no issuesShipping is available
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States The flex head torch is great for working on roll cages or exhaust headers. The torch includes a long back cap as pictured.
Buy It Now
Free Shipping Condition: New Location: Elk Grove Village, United States If you want a shipping discount on multiple items. Buy the items you want, do not pay for any items. And we will send you an invoice. Separate payments ... morefor each item by paypal are not eligible for combined shipping. Single payments for multiple items with invoices which E-bay has created with the incorrect shipping amount are not eligible for combined shipping. We can not refund shipping charges once payment(s) have been made for the incorrect shipping amount. When in doubt. Wait for us to send you an invoice! You are bidding on a brand new American Made Tig Welding Torch. This is a 17 series tig torch and will plug right in to the Miller Syncrowave 210 Tig Welder which requires the Thru Gas Twist Mate torch connector. Common brand names/designations are WP-17(Weldcraft) PTA-17(Lincoln) DB-17(Miller Diamond back) This is an extremely high quality tig welding torch which features a one piece power cable design. The power cable is made from silicone rubber with a nylon braided weave overlay which means it is extremely flexible- and it will stay flexible in cold weather! This design puts much less strain on your wrist and makes the torch feel lighter. We will put this torch against any of the above mentioned torches in both quality and performance. A 17 series torch is the standard torch found on many tig welders. It uses 10N series Alumina Cups which are about 1 7/8" long. The super flexible one piece cable assembly is 25 feet long. This is a 150 amp 100% duty cycle torch. This 17 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. You can see the close up photo of the USAWELD version of the Twist-Mate torch connector. The diameter of the connector is 1/2" and the gas flows through the hole in the center. Lincoln and Miller charge you over $35 for this connector alone- we include it on your tig torch! Save even more– Mig. Tig and Plasma parts ship FRE
Buy It Now
Free Shipping Condition: New Location: Chino, United States Tig Welder Torch Industrial Water Cooler Torch Welding Water Tank Chiller 110v. Water Capacity: About 10l. This Cooling Tank Is Designed for Use with ... moreTig Welders to Provide Powerful Cooling. 1 Welder Water Cooler.
Buy It Now
Free Shipping Condition: New Location: Chino, United States Function Parameter: Power Supply Voltage: 110v/60hz Phase Number: Single Phase Heat Dissipation: 1.5kw (1l/Min) Pump Power: 370w Maximum Pressure / Lift: ... more0.35mpa/50hz Water Capacity: About 10l Operating Temperature: -20 ° C ~ 60 ° C Weights&Dimensions Weight: 17kg Dimensions (Mm): 456 × 253 × 328 What's Included? 1 * Welder Water Cooler 1* Water Pipe 1* Inlet Connector 1* Socket Connector 1* Manual.
|
|
|
|
Miller Syncrowave 250 AC/DC TIG Welder Water Cooled
Call us at 404-736-6494 with any questions or to get a freightquote. Syncrowave 250 Complete Syncrowave 250 power source Miller Water Cooler RFC-14 Remote foot control 25 ft(7.6 m) TIG torch 20 ft(4.6 m) work lead w/clamp Gas hose Regulator/flowmeter Cable cover, Welding Capability Not to scale Aluminum Min. 0.015" 0.4 mm) Steel Min. 0.012" 0.3 mm) Aluminum Max. 1/2" 12.7 mm) Steel Max. 5/8" 15.9 mm) HF Start™ for customized arc starts allows the operator to choose from three different starting conditions to optimize the application according to tungsten diameter and material thickness. features adjustable penetration and cleaning action while increasing arc stability on various aluminum alloys. And helps eliminate tungsten spitting and arc rectification. operates only when needed reducing noise. Power consumption, and ... morethe amount of airborne contaminants pulled through the machine. start provides TIG arc starting without the use of high frequency. keeps output of the power source constant regardless of fluctuation in input power ± 10% Adaptive Hot Start™ for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion. Process TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Industrial to Heavy Industrial Applications Precision Metal Fabrication, Maintenance and Repair, Light Manufacturing, Heavy Manufacturing, Aerospace, Shipbuilding, Tube and Pipe, Vocational, Specifications Input Power Requires 1-Phase Power, Runs on 230 or 460 Volt, Rated Output 250 A at 34 VAC. 40% Duty Cycle, 200 A at 32 VAC. 60% Duty Cycle, Welding Amperage Range 3- 310 Amps, Net Weight 496 lb(225 kg)
|
|
|
Miller Econotig CC. AC/DC Welding Power Source--TIG WELDER
This listing is for a Mi ller Econotig CC AC/DC Welding Power Source T IG WELDER Purchased and Don't Believe Ever USED Sat around Shop Local Pick-Up#0423 Normal 0 MicrosoftInternetExplorer4 CHECK OUT OUR STORE FOR MORE ITEMS US 48 SHIPPING ONLY SOLD AS IS ALL SALES FINAL NO RETURNS ANY QUESTIONS: Please Message Me Bills Speed Shop 1919 Mound Rd Joliet. IL 60436 PURCHASE POLICY: Before purchasing any item(s) PLEASE READ& understand all details about item(s) We can assist you with any questions that you may have. Payments must be received within 72 hours. IF YOU BUY NOW/PURCHASE ITEM YOU ARE RESPONSIBLE TO PAY FOR THAT ITEM. PLEASE DO NOT HIT BUY NOW/PURCHASE AND NOT PAY FEEDBACK POLICY: Please allow us the opportunity to resolve/fix any problems that may occur during your experience with Bill’s Speed Supply before leaving neutral or ... morenegative feedback. All problems can be resolved in a quick and timely manner with your consideration. SHIPPING POLICY: We will combine multiple items to save you money on shipping. We are NOT liable for shipping service transit times. Transit times do vary based upon your location, once we have shipped your item(s) we are NO LONGER Responsible! Please check and view all shipping details and services in the shipping section just below the price column towards the top of the page! You can expect your item within 4-8 BUSINESS days from the time payment is received in full! We appreciate all of your business and look forward to doing more in the future. As stated earlier please allow us the opportunity to handle a problem that may occur in an orderly fashion to avoid neutral or negative feedback, though these policies come off as being blunt and to the point we just want all details to be viewed to avoid any complicated transactions that could arise, Thanks Bill
|
|
|
MILLER MAXSTAR 150S TIG WELDER 907135 FREE SHIPPING
MILLER MAXSTAR 150S TIG WELDER 907135 FREE SHIPPING UP FOR AUCTION IS A. MILLER MAXSTAR 150 STL WELDER CONDITION: USED. TESTED, WORKING 100% TIG Welder. DC, Phase 1 Output Range 5-150 Amps Rated Output 150 A at 16 VInput 28-22 Amps Input Voltage 120-230 OCV 90 or 12-16. 50/60 Hz Includes Power Source With 10 Ft Mvp Power Cord Electrode Holder With 13 Ft Of Weld Cable 10 Ft Work Cable With Clamp And Connectors Shoulder Strap THANK YOU FREE SHIPPING! STATES 5 DAY HANDLING TIME. 99% ARE SHIPPED WITHIN 2 BUSINESS DAYS PLEASE BID WITH CONFIDENCE AS OUR 100% FEEDBACK WILL ASSURE YOU! ABOUT US: WE ARE NEW TO THE EBAY COMMUNITY. OFFERING A VARITY OF PRODUCTS! FROM JEWELRY TO POWER TOOLS! EVERY WEEK WILL BE DIFFERENT! SO MAKE SURE YOU COME BACK AND CHECK US OUT! YOU WON'T BE DISAPPOINTED! RETURN POLICY: WE DO HAVE A RETURN POLICY OF 14 DAYS. IF ... moreYOU ARE NOT SATISFIED IN ANY WAY. YOU CAN RETURN YOUR ITEM FOR A FULL REFUND. ALL WE ASK IS THAT YOU LET US KNOW WHY YOU ARE RETURNING THE ITEM AND GIVE US THE OPPORTUNITY TO RESOLVE ANY ISSUES BEFORE OPENING A CASE OR LEAVING NEGATIVE FEEDBACK AND ANYTHING LESS THAN A 5 STAR RATING. EBAY DOES PENALIZE SELLERS FOR ANYTHING LESS THAN A 5 STAR RATING. WE WILL WORK WITH YOU IN EVERY WAY POSSIBLE TO INSURE YOU'RE TRANSACTION WITH US IS AS HONEST AND PLEASANT AS POSSIBLE. EMAILS: IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL US AND WE WILL GET BACK TO YOU WITH IN 24 HOURS. YOU ARE VERY IMPORTANT TO US. HOWEVER WE ARE CLOSED ON THE WEEKENDS AND HOLIDAYS, PLEASE ALLOW ADDITIONAL TIME FOR A RESPONSE DURING THOSE HOURS. THANK YOU AND HAPPY BIDDING!
|
|
|
Miller Coolmate 3 043007 Tig cooler welding water cooler
YOU ARE BIDDING ON A BRAND NEW Miller Coolmate 3 043007 Tig cooler welding water cooler LOOKS GREAT AND WORKS GREAT CONDITION 1 0/ 10 ONLY USED 3 TIMES(PAYMENT MUST BE MADE IMMEDIATELY FASTER PROCESSING AND SHIPPING PLEASE ADVISE US IF PAYMENT WILL BE DELAYED FOR ANY REASON) CUSTOMER SERVICE IS OUR NUMBER ONE PRIORITY AND WE STAND BEHIND OUR PRODUCTS 100% WE TEST OUR PRODUCTS TO BEST OF OUR KNOWLEDGE BUT WE UNDERSTAND THAT SMALL ISSUE'S CAN OCCUR EVEN AFTER INSPECTION.THAT IS WHY WE ASK OUR BUYER'S THAT IF THERE IS ANY PROBLEM AT ALL WITH YOUR PURCHASED,PLEASE GIVE US A CHANCE TO FIX IT AND MAKE IT RIGHT*PLEASE SEND A MESSAGE FIRST AND GIVE US AT LEAST 24HRS TO RESPOND,WE WILL RESPOND INSTANTLY MOST OF THE TIME) USING TODAY'S TECHNOLOGY TO MAKE SHOPPING ONLINE SAFER AND MORE RELIABLE) WE STRIVE FOR 5 STAR SERVICE! When leaving ... morefeedback. You'll be asked to rate our service on a 5 Star scale- 5 being the best. If you feel you didn't receive 5 Star service, PLEASE contact us before leaving feedback. We promise 100% satisfaction! READ ENTIRE AUCTION BEFORE BIDDING SUPER FAST SHIPPING: We ship out products 24-48 hours after item is paid for.With Tracking/Signature Confirmation Shipping options:With tracking ALL OF U.S.A. USPS) INTERNATIONAL- Canada. United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia
|
|
|
Miller XMT 304 CC/CV XMT304 Multi-Puropse DC Inverter Welder ARC MIG TIG
Miller XMT 304 Multi-Puropse DC Inverter Welder. Can do ARC, MIG, or TIG if coupled with the right accessories Condition: Excellent. Has some marks& scratches Can use 230/460 Single or Three Phase Input. Does not come with any accessories Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Miller Syncrowave 250 AC/DC Tig Welder water Cooler torch gas regulator complete
Nice used complete tig welding setup DC. AC and hi frequency for aluminum. Includes syncrowave 250 power source(runs on single phase power) miller water cooler, 250 amp brand new wp20-25r water cooled 250 amp 25 foot long tig torch, miller hand amptrol amperage controller, flowmeter inert gas regulator, ground cable/clamp and stick welding cable with electrode clamp. Everything you need to tig weld except a gas bottle. You are welcome to come weld with this unit in my shop prior to purchase. I also have a functionally identical hobart tigwave 250 machine that will be listed shortly if you would rather have an air cooled setup. buyer pays freight shipping from 30527 012-14-fr12-1-11353/550/jsy50 PLEASE READ BEFORE BIDDING: Contact me for correct freight rates as the calculator may be incorrect EBAY STORE NAME: industrial tool and machine works ... moreEBAY USER NAME: tom.jelly For our approximate location. Go to google maps and type in 30527 IF YOU ARE MAKING A BEST OFFER. MONITOR YOUR EMAIL OR YOU WILL NEVER KNOW IF I HAVE ACCEPTED! Electrical boxes shown without covers do not include covers. Order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches& chuck keys not included unless pictured. RETURN POLICY– REFUNDS FOR RETURNS FOR ANY REASON OTHER THEN DOA WILL BE SUBJECT TO A 10% RESTOCKING FEE. OUR EBAY FINAL VALUE FEE. SHIPPING FEES AND OUR PAYPAL FEE. YOU WILL ALSO BE REQUIRED TO SEND THE ITEM BACK PROPERLY PACKAGED, INSURED, AND WITH DELIVERY CONFIRMATION. IF AN ITEM COMES BACK TO US DAMAGED, YOU ARE REQUIRED TO FILE THE CLAIM WITH THE SHIPPER. NO RETURNS OR ADJUSTMENTS UNLESS YOU CONTACT US WITHIN 3 DAYS AFTER DELIVERY. NO RETURNS AT ALL ON ITEMS THAT STATE- SOLD AS IS. REPAIR LOT, IN NEED OF REPAIR, SALVAGE OR DAMAGED. FOREIGN AND FREIGHT ITEMS ALWAYS RETURNED AT BUYERS EXPENSE STATEMENT OF ITEM CONDITION– Warranty cards and original receipts are never included. Even when purchasing new items. Every attempt is made to accur
|
|
|
Miller Tig HF-251 D-1 High Frequency Arc Starter
This is a miller tig HF-251D-1 high frequency arc starter. It has a Bernard 2500SS cooler on it. The foot pedal is a Miller RFCS-14. It has 3 different tig welding torches and lots of extra tips that go with it. THE TANK IS NOT INCLUDED I will put it on a skid and ship it by frieght truck. This is a very nice unit. Any questions give me a call 9374596687
|
|
|
Miller Switchcraft Tig Welder Fingertip Control
Miller Switchcraft fingertip current control. Attaches to torch head using straps giving the user fingertip control of current without a pedal. Great for applications where a pedal can not be used. I have used this accessory twice. It is in great condition. 28 ft. long cord. Posted with
|
|
|
MILLER CST 280 Tig/ Stick Welder
I HAVE FOR AN AUCTION A MILLER CST280 TIG/STICK SINGLE OR THREE PHASE. I HAD USE IT FOR ABOUT THREE MONTHS, IN VERY GOOD WORKING CONDITIONS, NO ONE PROBLEM, IM LOOKING TO BUY A BIGGER MACHINE SO I DONT HAVE USE OF THIS ONE ANY MORE.IT COMES WITH THE TIG TORCH AND GROUND ALSO THE GAUGES.CUSTOMER WILL BE RESPONSIBLE FOR SHIPPING AND HANDLING DEPENDING ON THE LOCATION. Input Power Requires 3- or 1-Phase Power, Rated Output 3 ph: 280A@ 31.2V. 35% duty cycle, 3 ph: 200A@ 28V. 100% duty cycle, 1 ph: 200A@ 28V. 50% duty cycle, 1 ph: 150A@ 26V. 100% duty cycle, Welding Amperage Range 5- 200 Amps- 1 phase, 5- 280 Amps- 3 phase, THANKS IF ANY QUESTIONS FEEL FREE TO CONTACT ME 832-390-7815
|
|
|
Miller Maxstar 150 STL TIG Welder w/ Extras
Miller Maxstar 150 STL TIG Welder w/ Extras In good working condition. Tested. Comes with(2) grounds. Weld craft gun(WP 17) 3) new Weld Craft tips and original Miller hard case. Also included is a Smith gas regulator and hose.
|
|
|
miller rfc 23ag tig welding foot control
This is a miller tig welding foot pedal#rfc23ag. It is in good used condition paint is worn off of top where foot goes. The rest of the pedal has normal use scratches. The cord is about 16 feet long. It was fully functional last i used it. It has been in storage for some time and i no longer have the machine to test it. If you have any questions i will do my best to answer them please check my other auctions
|
|
|
MILLER ELECTRIC TIG WELDING MACHINE MODEL # SR32 230/460 VOLTS
MILLER ELECTRIC TIG WELDING MACHINE MODEL# SR32 230/460 VOLTS This item was removed from a vessel that was recycled at our Brownsville. Texas facility. This welding machine weigh s 840 lbs. It has not been te sted. You are buying this welding machine AS IS with no warranty expressed or imp lied. There are dents in the back of the unit as seen in the photos. We will be glad to load this on your freight truck at no additional charge. Please make sure this suits your needs before purcha sing or making an offer for this item. Please feel free to call if you need more details or photos. THE FOLLOWING INFORMATION COMES FROM THE MANUFACTURE MANUAL THIS INFORMATION CO VERS THE FOLLOWING 3 MODELS: SR-32. SR-42, SR-32WR THIS CONTROL UNIT IS DESIGNED SPECIFICALLY FOR USE IN CONJUNCTION WITH RECTIFIER TYPE DC ARC WELDING MACHINES. THE CONTROL UNIT CONSISTS ... moreOF A HIGH FREQUENCY UNIT. 1/2 KVA CONTROL TRANSFORMER, PRIMARY CONTACTOR, GAS AND WATER VALVES WITH ADJUSTABLE POST FLOW TIMER AND REMOTE MAINTAINED HAND SWITCH FOR CONTACTOR CONTROL. HIGH FREQUENCY IS PROVIDED FOR EASY ARC STARTING AND MAY BE SET FOR CONTINUOUS OPERATION. FOR START ONLY, OR TURNED OFF COMPLETELY. THE 1/2 KVA CONTROL TRANSFORMER PROVIDES 115 VOLTS FOR OPERATION OF THE CONTACTOR, WATER AND GAS VALVES AND HIGH FREQUENCY REGARDLESS OF PRIMARY INPUT VOLTAGE. IT ALSO PROVIDES 30 OR 70 VOLTS( DEPENDING ON THE MODEL) TO POWER THE CONTROL CIRCUIT. THE GAS AND WATER SOLENOID VALVES CONTROL THE FLOW OF SHIELDING GAS AND COOLING WATER. THE POST FLOW TIMER CONTROLS THE LENGTH OF TIME GAS AND WATER FLOW AFTER THE WELD IS COMPLETED. Thank you for looking at our items for sale. Esco Sales is a division of Esco Marine. Inc. the premier Ship Recycling yard in the world. We are located at the Port of Brownsville down at the very tip of Texas. In our efforts to recycle and avoid landfills we have set up our Internet sales to go along with our brick and mortar store. We do our best to research. Describe, check, and price the items we post. Please remember that we are
|
|
|
A.o Smith 115v Tig Torch Cooler Fan Blade Procon Motor Miller Coolmate Bernard
Used good condition tig cooler fan motor for use with procon pump and fan blade. Motor has been cleaned and re-lubricated. Motor runs great. 115/120v input power. Came out of Bernard 3500ss tig torch cooler unit. 3 day sale starting 5/11/2013 ending 5/14/2013 $85.00 shipped. Inventory elimination sale! All Items are priced with Free Shipping. Please feel free to make offers on any of the items I have for sale. I will consider all reasonable offers. If you buy several items from my listings. I can cut better deals because, all items that can ship together, WILL ship together! Shipping this way will allows me to further reduce prices on products since there will not be double shipping cost for me to pay, and also ensures that you receive all of your items the same day they are delivered. I usually respond to messages and offers within 10-30 ... moreminutes of there posting. I ship within 1 hour of payment clearing. All orders made before 4PM EST. will ship the same day. Thank you for looking at my listings. NO RESERVE AUCTION! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13ea2800f45-0xfe-
|
|
|
Miller RFCS-23 Tig Welder Foot Pedal
THIS IS A NICE MILLERRCFS-23 FOOT CONTROLLER GOOD CONDITION# Shipping on this item is 21.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be shipped out within 48 hours of purchase if ... moreit is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item12 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13ea39b180f-0xf4-
|
|
|
Miller Goldstar 452 Stick/TIG Welder Complete Package with Leads!
Call 404-736-6494 with any questions or to get a shipping qutoe. ® 452 From steel erection to shipbuilding. From foundries to refineries, the Gold Star Series from Miller is known by welders the world over for rugged, reliable performance and superior arc characteristics. Complete with: Goldstar 452 Power Source Stick Welding Lead Set 25FT TIG Torch with Gas Valve 12.5FT Flowmeter& Hose Built-in arc control for Stick welding allows operators more flexibility when welding in tight areas where sticking electrodes is a problem. Hot Start™ makes it easy to start difficult electrodes. Simple control panel provides easy. Efficient operation. Unique Fan-On-Demand™ operates only when needed reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. Enclosed circuit board provides additional protection ... moreby eliminating contaminants which cause premature failure of components. 15 amp 115 VAC duplex receptacle allows operators the flexibility to run tools from power source without the need for additional 115 VAC power in the weld area. Power efficient for exceptional value and return on you investment. Power cord strain relief. Base Model Starting at: List Price(US$) Stick(SMAW) TIG(GTAW) Air Carbon Arc(CAC-A) thru 5/16" carbons, Flux Cored(FCAW) MIG Spray Transfer(GMAW) Welding with Voltage-Sensing Feeder, Manufacturing Industrial Steel Building Erection, Pipe Welding, Maintenance and Repair, Shipbuilding, Construction, Foundries, Input Power Requires 3-Phase Power, Rated Output 450 A at 38 VDC. 60% Duty Cycle, Welding Amperage Range 20- 590 Amps, Net Weight 404 lb(183 kg)
|
|
|
MILLER DYNASTY DX TIG WELDER WITH COOLER CART&FOOTPEDAL
Miller Dynasty 200DX tig welder with cooler and cart. Used for one job and don't need it anymore. Comes with torches. Hoses and gauge. No foot pedal or coolant. Still in excellent condition.
|
|
|
MILLER TIG WELDING FOOT CONTROL/SWITCH UNIT, Model "GUESSING" RFC 23 ARB,
NO RESERVE THIS auction for 1-PC used: MILLER TIG WELDING FOOT CONTROL/SWITCH UNIT. MODEL; GUESSING RFC 23 ARB. Not sure of the model, but looks like a miller emblem on it, pedal feels fine, cord OK, plugs on the end are twist lock 3-prong, it's labelled doesn't works but has been crossed out, this is sold as-is(unknown condition) I did take one of these apart a year ago and they seem to be built like a sewing machine control pedal, if you want to take a chance or repair. used condition. Shipping $16 priority(large priority box) You Get What You See! Postal money orders& company checks always welcome! Local pick-ups are always welcome(no charge) The following is some very informative radio links: http:www.soundwaves2000.com/radio%5Fliberty/ http:www.republicbroadcasting.org/index.php?cmd=listenlive, http:www.gcnlive.com/Listen_Live.html ... moreBecause you can handle the truth! May be soiled/dings from storage. Be sure to add me to your favorites list! I normal ship within 1 day upon receiving payment by Friday 9 am Central time(after 9am item ships following Mon. No shipping on Sat. I use USPS parcel post. But when an item fits a Priority Flat rate box($12.00) I use that to save you money if its less than parcel post! I use the last four(4) digits of the ebay number. And title for my reference. Returns are welcome if not as described!
|
|
|
Miller Aerowave Tig Powersupply and Bottle Cart
Miller Aerowave powersupply and bottle cart. Purchased in a lot from a large aerospace manufacturer. Unit is not working. Repair or use for parts. Must pick in the Los Angeles area(91387) or arrange for pack and ship.
|
|
|
Miller Coolmate 4 4 Gallon PN: 042288 Cools MIG and TIG welding guns and Torches
Miller Coolmate 4 Miller Coolmate 4 Mig and Tig Cooler. Used condition. 30 day Warranty. From the Manufacturer: The best performer in its class. The tough. One-piece case is portable and rustproof. A carrying handle and filler spout are molded into the case. Cools tig torches and mig guns rated up to 600 amps. Stock Number Motor Input Voltage Amps Input Full Load Maximun Cooling Capacity Tank Capacity Dimensions Net Weight( 042 288) Coolmate 4 115 VAC, 50/60 Hz. 4.7 A 60 Hz. 18.000 BTU/hr at 5.9 qt/min( 5.6 L/min) 4 gal( 15 L) H: 16 1/4" 413 mm) W: 15 1/4" 387 mm) D: 18 3/4" 476 mm) 44 lbs( 20 kgs) Shipping Information: $65 Expedited Shipping to anywhere in the US or Canada! YES! We do combine shipping! Please purchase/pay multiple items and we will refund so you only pay actual shipping. Who are we? We are a liquidator from ... moreOntario. Canada. We liquidate stock, assets and seizures. We are not a authorized reseller of the above product, and as a result you will receive a fantastic deal and based on the above description, a money back guarantee. We love reasonable offers and assuming it is reasonable we will promptly accept or counter offer. LiquidateOntario Bidding/Purchasing Terms: Please Note; This item is being shipped from Ontario. Canada. If you are purchasing from US or Internationally, shipping times are very much dependent on Customs as they may hold your package for processing, and may charge you duty(tax) on the purchase price. In the case of US Purchasers, this almost NEVER happens, however you are fully responsible for the charges if it does. Canadian Customers: We appreciate our Canadian customers very much. And will do our best to provide you with the best shipping deal possible. 99% of the time your item will be shipped via Canada Post Expedited. We are required to charge Sales Taxes and Canadian Customers will be required to a pay HST. Thank you for your interest and opportunity to do business with you! Please check out our other listings for other amazing deals! eBay Store_gsr
|
|
|
Miller Maxstar 150 STL TIG/ARC Welder
Miller Maxstar 150 STL Tig/Arc Welder in very good used condition. Includes everything shown in picture.
|
|
|
Miller Maxstar 150 STL 150STL TIG & Stick Welder Unit 907135
Miller Maxstar 150 STL TIG& Stick Welding Unit. Miller Stock No. 907135 Condition: Excellent. Has some marks, stains, scratches but is fully functional Accessories include: M-150. Arc Welding Lead for Stick Weld Extension for Arc Lead Ground Lead& Clamp Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
MILLER MAXSTAR 200 DX 903701-01-1 TIG/STICK WELDER POWER SOURCE
MILLER MAXSTAR 200 DX 903701-01-1 TIG/STICK WELDER POWER SOURCE Input Power-115-460VAC. 3 or single phase Used only 49 hours. 58 minutes A-1 condition. Working unit
|
|
|
Miller RFCS-14 TIG Welding Foot Pedal Stock 043 554 Style LD-40 RFCS14 LD40
Miller TIG Welding Foot Pedal. Model: RFCS-14, Stock#043 554, Style#LD-40 Condition: Good. Exterior marks, scratches, stains No torches. Cables, connectors, or any other accessories included, just the just what you see in the photos Tested& Guaranteed to work. Buyer has 30 days to return if not fully satisfied Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Miller Coolmate 4 TIG Welder Water Cooler - free ups - junE13
HELLO AND WELCOME. REPEAT BUYERS, YOU KNOW THE RULES. NEW BUYERS AND LOW FEEDBACK BUYERS, THE FOLLOWING RULES BELOW ARE A CONTRACT CONDITION OF PURCHASE, THEY ARE A RESULT OF 13 YEARS OF ONLINE SALES. PLEASE READ THE TERMS OF THIS SALE BELOW On the issue of contact, it is of the utmost importance that if you have any questions or concerns about this sale that you call/text me at(954-588-0535) Mon-Fri 8am-7pm central standard time* DO NOT EMAIL ME. ITS BEST TO CALL OR TEXT ME* I spend 7 days a week at auctions and picking up items for sale. So I very seldom get your emails in time. I still get around 200 emails per week and my inbox is overloaded. After the sale I do provide my private email for those buyers who cannot call me. It's a very hectic lifestyle: 5-9 BUSINESS DAYS FOR RECEIPT OF ITEM. I ALONE AM ALWAYS SELLING THOUSANDS OF ITEMS ... moreSO THIS MAY SHIP IN 1 HOUR/ 1 DAY OR 4 DAYS DEPENDING ON WORKLOAD BUT IT WILL BE THERE BY THE 9TH BUSINESS DAY. MOST WILL GET THERE WAY BEFORE THAT TIME BUT I'M JUST COVERING MY BASES, JUST IN CASE I FALL BEHIND. MY PRICES ARE CHEAP BECAUSE I DO EVERYTHING MYSELF SO YOUR UNDERSTANDING OF MY DELIVERY WINDOW IS MANDATORY BEFORE PURCHASE. IF YOU NEED IT FASTER. CONTACT ME VIA TEXT OR CALL, YOU CAN ALSO SEND SELLER A MESSAGE OPTION AFTER SALE. MY INTERNET HISTORY IS MASSIVE AND WITH A GOOGLE SEARCH YOU CAN SEE MY COMMITMENT TO THOSE HONEST BUYERS WHO FOLLOW THE FEW BASIC TERMS OF ALL MY MANY AUCTIONS Select items will need a signature at time of delivery due to their rarity. I will always let you know if you will have to sign for this when I ship it via email. Please make sure your address is up to date and valid. Sending any item is the same as sending your hard earned cash in the mail. IF THIS IS A HARD TO FIND, UNIQUE/ EXPENSIVE item, PLEASE EXPECT TO SIGN FOR IT FROM THE CARRIER I EXPECT YOU THE BUYER TO KNOW THE SPECIFICS OF THE ITEM YOU ARE BUYING. I GET MANY ITEMS EVERY DAY AND IF I KNOW THE PARTICULARS OF THIS ITEM. I WILL LIST THEM. JUST GOOGLE THE MODEL NUMB
|
|
|
Miller Syncrowave 350 Tig Welder Foot Pedal
Foot pedal came off of a Syncrowave 350. Excellent working condition. 20 to 25 foot cable attached.
|
|
|
Miller synchrowave 180 SD TIG welder PERFECT COND
TIG welder with cart. no bottle. everything perfect. I bought this back in about 2007 and used it maybe a dozen times to clean up my MIG welds. Taking up space. So it's up for sale. 220v service required. 50a plug installed in picture but will be removed from the cord so you can do your own electrical work. Perfect condition barely used. Local pickup only or can deliver for gas and lunch 50 mi. cart. Stick wands, cord, tig wand, grounds, pedal and misc rods and sticks books and clay shrouds etc go with it. These ran about $2500 new. This one might as well be called new. The ad says no shipping but if you want to pay for all materials and 50 bucks extra then I'll crate it if you make all the shipping arrangements. I have access to a truck dock. send any questions. listed elsewhere for sale so I reserve the right to end the auction ... moreearly for local sale. reserve is set well below the buy-now. I got a deal on it when I bought it so I don't need what others are asking for this model.
|
|
|
Miller Amptrol Tig Torch Control RCCS-14 / RCC-14
This is a Miller RCCS Amptrol tig torch amperage control that mounts to a tig torch. It is used but in great working condition. I was using it with my welder but. On my old DialArc tig setup, it only controls one function and it is too bulky for just one function. It has the 14 pin style connector with six pins and the side to side rolling control knob. 26 foot cable. This is the older style I believe but I think it works with most all Miller tig machines. Please check your application and make sure it will work with your welder or HF arc unit. As you likely know these units new cost anywhere from $175 to over $200 depending on where you get it. This would make a great back-up. Second unit or a great first tig control for the newbie welder on a budget.
|
|
|
Miller RHC-14 Hand Control Rheostat Welding Tig Welder controller Weld $50
Description You are bidding on one(1) used Miller Hand Control. Model: RHC-14. We have other welding items listed. Condition Item is used; works fine. Shipping& Handling I can ship USPS or FedEx Ground. Buyer pays $13.97 shipping and handling(shipped in 48 States) I accept Paypal. Tax Louisiana residents will be charged a 4% sales tax. id: 11.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13ffe96eb97-0x104-
|
|
|
MILLER DIVERSION165 AC/DC TIG WELDER WITH FOOT PEDAL TORCH GROUND ARGON GUAGE
CUSTOM MILLER DIVERSION165 AC/DC TIG WELDER THIS UNIT HAS BEED MODED TO THE QUICK DISCONNECT TORCH AND GROUND FOR BETTER STORAGE. TRANSPORT TO AND FROM THE JOB TORCHS CAN BE CHANGED FROM A#9 TO#17 TO#26 BY JUST PLUGGING THEM IN. IT COMES WITH A TORCH(9 OR#17) YOUR CHOICE. ARGON FLOW GAUGE, GROUND CABLE AND CLAMP AND A(TOP OF THE LINE) SSC FOOT PEDAL" It's as easy as"1. 2, 3" to set your machine and start welding! 1. Power-up 2. Select material type 3. Set material thickness range. Whether it's in the shop. Garage or at the race track, at 50 lbs it can be taken anywhere. Our Fan-On-Demand ™ cooling system only operates when needed. This cuts down on fan noise and reduces power consumption and contaminants drawn into the machine. The full amperage range is available from 10-165 amps on both DC and AC output. By utilizing ... morean inverter-based AC/DC power source. A more efficient(less energy is used) and consistent welding arc are provided compared to older transformer based TIG machines. Provides HF. Non-contact arc starting to eliminate tungsten and material contamination time after time. Our Auto-Postflow feature optimizes postflow time based on welding amperage. This allows for proper shielding of both the weld end zone and electrode every time without waste of gas or need for adjustment. I STAND BEHIND THE ITEMS I SELL WITH PRIDE AS A HARD WORKING AMERICAN PLEASE LEAVE POSITIVE 5 STAR FEEDBACK I WORK VERY HARD TO KEEP MY FEEDBACK RATING PLEASE CONTACT ME IF THERE IS A PROBLEM BEFORE LEAVEING FEEDBACK. THANK YOU, To learn more about this and other items I have for sale on ebay or for customer service go to georgesplasmacuttershop.com
|
|
|
MILLER HF-251D-1 High Frequency Arc Starter for TIG (GTAW) Welding
Miller HF-251D-1 High Frequency Arc Starter for TIG(GTAW) Welding We believe these have not been used. We cannot verify so to conform to eBay's"Condition" policy. These are being sold as"Used. 2 units available: S/N: LK110084G(small ding on front frame- please see photo) S/N: LK110085G Stock No. 042388 Volts: 115. Amps: 1.5, KW.09, 50-100 Hz, 1 Phase Owners Manual Included Upon delivery. Inspect the package for damages and take pictures of the package.you MUST note any damages on the Bill of Lading or this could void your warranty. 14-Day Warranty is only accepted for defects and malfunctions. Not user-caused damage. Presumed good. But untested. We do not have the expertise to test further. This means that this item is being sold as-is, as-pictured with the assumption and understanding that there may be unknown defects. ... moreComes with a 14-day right of return. Reference#37487/37498 SALES TERMS AND CONDITIONS: Only items pictured are included. If a part is not pictured. Or mentioned in the description, then it is not included in the sale. For multiple quantities. The pictured serial number is not necessarily the one that will be sent. PAYMENT TERMS AND CONDITIONS: Payment is due within 5 days after purchase or end of auction. Contact us for payment methods to pay on pickup. Sales Tax applies to all Ship-To addresses within California. Rate is based on the current tax rate at time of shipment. Resellers must provide a Resale Tax ID for our records. We cannot process the order until we receive sales tax or a copy of your Resale Tax ID. Freight Items: Please wait for an invoice with added crating/shipping charges before paying. SHIPPING: Local Pick-Up is available. A contact name and telephone number are required for shipping purposes. Please state if delivery address is residential or business. International orders are subject to DUTIES/TAXES or other import fees. These fees are the buyer’s sole responsibility. We reserve the right to refuse shipment to certain countries. FREIGHT SHIPMENTS: Buyer has
|
|
|
Miller Syncro Wave 300 Tig Welder
Miller Syncro Wave 300 Tig Welder Extra torch Dual Gauge Foot Pedal Control Machine is in very good working condition with all necessary components. Please contact seller for shipping options. Local delivery available.
|
|
|
Miller TIG welder radiator / water cooler
Used older Miller Radiator-1 model tig torch water cooler. Both units pump and run. Could use a complete tear down for cleaning and tank washing. The units have been blown out with compressed air and the hoods washed. NO SHIPPING. Pickup in the local Indianapolis area only. Please be sure to visit my other listings for other Miller welding equipment.
|
|
|
Miller Maxstar 150 STH Tig welder MPV plug P/N 907136
Welder tested and works great! Comes with everything you see. comes with MPV plug for easy conversion to 110V or 220V.
|
|
|
Used 25' WP-17 Tig Welding Torch Miller Dynasty Thermal Arc 186 185 NO RESERVE
You are bidding on a used 20 SERIES WATER COOLED tig torch that is 25 feet long. The item has been used and is tested and in great working condition. The leather cover does show some wear as the item is used. Fits Miller machines. Thermal Arc machines, Longevity and anything that uses a 1/2" dinse and 5/8-18 gas fitting. A 17 series torch is the standard torch found on many tig welders. It uses 10N series Alumina Cups which are about 1 7/8" long. The super flexible one piece cable assembly is 25 feet long. This is a 150 amp 100% duty cycle torch. This 17 series torch includes a long back cap. But does not include any collets, collet bodies alumina cups or tungsten. We have all these items in our store, and they would ship for no additional shipping charge. Need a water cooler? We have them in 110v. 220v or dual voltage! Ebay item# ... more170971865735 Happy bidding! Be sure to check out our store for other products as well as our new flowmeter!
|
|
|
MILLER TIG MIG WELDER WELDING FOOT PEDAL #RFCS-14 CONTROL - AIRCO LINCOLN
This is a used MILLER foot pedal for a Miller TIG welder. The model number is RFCS-14. It is in good cosmetic condition but I have no way to test it I'm afraid(I'll guarantee that it works) Please see pics for condition and what it is included. Don't miss it as I'm including FREE Priority Mail shipping! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive comments on fast shipping& packing! I ship Via USPS and ... moreUPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1405b91c06e-0x105-
|
|
|
miller maxstar 350 welding machine stick pulse tig cooler + accesories nr
Free shipping Miller maxstar 350 with integrated cooler includes. Power cord tig torch, ground lead and 300 amp ground clamp. This unit is functioning properly with no problems it will run on single or 3 phase power. The cooler is integrated below the unit and will be shipped dry(does not come with coolant you will have to put it in first) below is from the manufacturer The Miller Maxstar® 350 TIG welder is one of the finest DC TIG/Stick welding machines available and provides outstanding arc performance and product reliability. Processes DC TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Manufacturing/Industrial Applications Precision Metal Fabrication Tube Mills Pipe and Tube Fabrication Tool and Die Pressure Vessel Manufacturing Exotic Material Fabrication Features DC TIG Features Exceptionally smooth and precise arc High-Speed ... moreDC TIG Pulse Controls DC Stick Features Tailored arc controls(DIG) Hot Start™ Auto-Line™ allows for any input voltage hook-up(208-575 V) with no manual linking. Providing convenience in any job setting. 120 V auxiliary power receptacle for cooling system or small tools. Program memory features 9 independent program memories that maintain/save your parameters. Programmable start parameters allow the operator to independently set starting conditions based upon process and memory selections(amperage and time) Superior TIG/Stick arc performance on all input voltages. Even on the difficult to run electrodes like E6010. HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination. Auto-Postflow calculates the length of postflow time based on the amperage setting. This eliminates the need to independently set the postflow time for different amperages. This feature preserves your tungsten and prevents porosity. Lift-Arc™ start provides TIG arc starting without the use of high frequency. Fan-On-Demand™ only operates when needed— reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. Wind Tunne
|
|
|
MILLER MAXSTAR 150,BROKEN ,DAMAGED,NOT WORKING FOR PARTS,TIG WELDER,
MILLER MAXSTAR 150. BROKEN DAMAGED.DOES NOT WORK COMES AS PICTURED NOT SURE WHATS GOING ON WITH IT FOR IT NOT TO TURN ON BUY THIS IS BUY AS IS AND NO REFUNDS. ALL CABLES INCLUDED ALL GOOD SHAPE. THE GROUND CLAMP HAS SOME USE ON IT AND NOT PERFECT.
|
|
|
MILLER PC-300 GTAW PULSER TIG CONTROL
For auction is this Miller GTAW TIG PULSER CONTROL PC-300. I have had this for several years bought it new and then sat it on the shelf. I always seemed to grab the MIG gun and never the TIG. It was put into the cart stack shown in the picture just recently had thought of finally trying out TIG welding but now am just not doing any more welding. I did test and try out the unit does a good job at pulse control of welder. You get the PC-300 pulser ONLY! Other items selling separate. On Aug-21-13 at 18:02:01 PDT. Seller added the following information:
|
|
|
miller maxstar 350 welding machine stick pulse tig cooler ready to weld 907334
Miller maxstar 350 with integrated cooler This unit is functioning properly with no problems it will run on single or 3 phase power. The cooler is integrated below the unit and will be shipped dry(does not come with coolant you will have to put your own in it) below is from the manufacturer The Miller Maxstar® 350 TIG welder is one of the finest DC TIG/Stick welding machines available and provides outstanding arc performance and product reliability. Processes DC TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Manufacturing/Industrial Applications Precision Metal Fabrication Tube Mills Pipe and Tube Fabrication Tool and Die Pressure Vessel Manufacturing Exotic Material Fabrication Features DC TIG Features Exceptionally smooth and precise arc High-Speed DC TIG Pulse Controls DC Stick Features Tailored arc controls(DIG) Hot Start™ ... moreAuto-Line™ allows for any input voltage hook-up(208-575 V) with no manual linking. Providing convenience in any job setting. 120 V auxiliary power receptacle for cooling system or small tools. Program memory features 9 independent program memories that maintain/save your parameters. Programmable start parameters allow the operator to independently set starting conditions based upon process and memory selections(amperage and time) Superior TIG/Stick arc performance on all input voltages. Even on the difficult to run electrodes like E6010. HF arc starting provides non-contact arc starting that eliminates tungsten or material contamination. Auto-Postflow calculates the length of postflow time based on the amperage setting. This eliminates the need to independently set the postflow time for different amperages. This feature preserves your tungsten and prevents porosity. Lift-Arc™ start provides TIG arc starting without the use of high frequency. Fan-On-Demand™ only operates when needed— reducing noise. Power consumption, and the amount of airborne contaminants pulled through the machine. Wind Tunnel Technology™ is an Internal air flow that protects electrical components and PC
|
|
|
MILLER LC-30 RFCS-14 TIG PEDAL LINE AND PLUG IN VERY GOOD USED CONDITON
MILLER TIG PEDAL. LINE AND PLUG LC-30 USED AND IN GOOD CONDITION PLEASE SEE PICTURES AND ASK QUESTIONS BEFORE BIDDING. CLEARING OUT THE SHOP, I AM A ONE MAN BAND. I DO NOT POST THE TRACKING NUMBERS BECAUSE I AM BUSY PACKING YOUR ORDER AND BRINGING THEM TO THE SHIPPING LOCATION IF YOU MUST HAVE THE TRACKING NUMBER. EMAIL ME AND I WILL PROVIDE IT. SEE MY FEEDBACK. IT CLEARLY SHOWS THAT YOU WILL GET YOUR ITEM AS QUICK AS POSSIBLE THANKF FOR CHECKING OUT ANOTHER GSXRONLY.C0M AUCTION 407-492-5854
|
|
|
Miller Tig Welder Finger Tip Amp Control RCC-14
Miller Electric finger tip/hand amp control for 14 pin tig welders. Very lightly used and in excellent condition. This finger control came with my Dynasty 200 DX tig kit. I'm switching to the foot pedal. Works perfectly. Just not for me. US and paypal only. On Aug-18-13 at 14:41:32 PDT. Seller added the following information: The proper model number is RCCS-14. Sorry I missed the"S" Thanks for looking!
|
|
|
Miller RFCS14-HD Foot Tig Control Pedal RFCS14
Good condition and works perfect. This the HD version that comes in the contractors kit. I upgraded to the wireless pedal and dont need this anymore. This will fit Miller Syncrowave. Dynasty and other tig welders. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-14126f56097-0x102-
|
|
|
Miller RFCS-14 HD Tig Foot Pedal Control
Up for auction is a good used Miller Tig foot pedal. The part number is RFCS-14HD. The foot pedal had been in use till cord got cut, just needs new end put on and will be a great pedal. Do not need pedal anymore selling welding machine in another auction.
|
|
|
Miller TIG welding foot control for amperage
You are looking at one used MIller Electric cord connected foot amperage control pedal. There are two part numbers on the back of it. RFC-14 and 129 339. I do know that about 3 years ago the controller worked before the machine broke. Not much else I can say about this item. What you see is what you will be getting. This item is being sold as-is with no returns. Buyer pays all shiopping cost. Please ask any and all questions prior to bidding. Check out my other auctions for a TIG water cooler and TIG torch. Thanks for looking and good luck bidding. On Sep-16-13 at 19:43:51 PDT. Seller added the following information: Update. I just realized I will not be available for questions from this friday till sunday evening.
|
|
|
Miller RHC-3 Hand Remote Controll Tig
came out of a working factory.
|
|
|
Miller Synchrowave 250 TIG Arc Welder with Cooling Radiator
T his is an auction for a used Miller Synchrowave 250 TIG Arc Welder with Radiator-1 cooling unit and foot pedal. This was purchased from a working maintenance department. Because I know next to nothing about welding I asked my customers what type of welder this was. The consensus was it was a TIG welder that was capable of being set up for ARC welding but all the components for ARC were not there. There is also a regulator on the back that is not pictured. Sold as-is We will combine shipping when possible. Try our shipping calculator below. All of our items are available for pickup in our Franklin. Mass store. 1376 West Central St, Route 140. M-F 8-5 PM. Thank you for looking! Check out our Ebay store and other auctions at http:stores.ebay.com/Marathon-Tool You may contact us@ 1-800-821-4927 Good Luck! 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-141700b771e-0xfa-
|
|
|
MILLER WATERMATE 1 - TIG COOLING SYSTEM
HELLO! UP FOR SALE IS THIS MILLER WATERMATE 1 TIG COOLING SYSTEM. THIS UNIT HAS BEEN PROPERLY TESTED AND CONFIRMED TO BE IN GOOD. WORKING CONDITION. ALTHOUGH IT DOES EXHIBIT SOME SLIGHT WEAR FROM PRIOR USE, THIS TIG COOLING SYSTEM IS UNDAMAGED AND IN GREAT CONDITION TO BE USED ONCE AGAIN. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME. THANKS FOR LOOKING! Check out my! Be sure to add me to your!
|
|
|
Miller RFCS-14 HD Tig Foot Pedal Control EXCELLENT!!!
Description For sale is an excellent Miller RFCS-14 HD foot pedal. This came out of a company that closed. It appears to have been used very little. The paint on the bottom is barely even scratched let alone worn off from use. See pics below. PLEASE SCROLL DOWN TO SEE LARGE DETAILED PICTURES* Our pictures are part of the description. Please examine them carefully. You get exactly what is pictured. See pics for details. We sell an assortment of items that are both new and used. We do our best to describe the item accurately. But please use the pictures as your final decision maker on whether you want the item or not. We are not experts in all areas. If you have questions, please contact us. Many of our used items come from estates. We do realize that with many antiques and vintage items. Condition is everything. However, we typically do not ... moredo too much cleaning of these items as we know that with certain items, if they are not cleaned properly, it diminishes the value. We leave the cleaning up to the new owner. Contact US: If you have any questions before or after winning the auction. Please do not hesitate to contact us. Our office hours are Monday to Friday 8am-6pm CST. We are off during the weekends and all major holidays. All emails and shipments will be processed within 2 business days. If you are not satisfied with the purchase. Remember to contact us before you leave a feedback. Leaving feedback means you have already graded this transaction. And it will not help to bring it closer to resolution. We like good feedback, so we work to the best of our ability to"get things right. Before leaving a negative feedback, contact us first. for more great items! Payment Payment Method: We will accept PayPal payments. Credit card payments through PayPal only. Buyer must use checkout to get the total and choice of payment method after the auction ends. Payment must be received within 3 days(from the auction ended date) or non-paying dispute will be filed to your account. If you need more time. Please contact us
|
|
|
Miller Dial ARC tig welder with cooling system
Works great. Complete unit with radiator cooling system. Foot pedal, and gun.
|
|
|
CK Worldwide Tig Finger Amp Control Miller Dynasty Syncrowave
Brand new tig finger amp control. This is a universal fit for torches. During shipping the finger adjustment slide broke off. CK will sell you a new potentiometer that can be soldered on. Or you can try to glue back on the finger grip. The cable is 28ft and is in perfect condition. This sells new for $180
|
|
|
Miller Syncrowave TIG Control Switch 145-475
Here's a used. Good condition switch off a Miller Syncrowave 351 Tig Welder. Check photos for where it fits on your machine. Should fit many of the Syncrowave as well as other Miller TIG machines possibly. There were 4 of them on the machine I had. A couple were broken. So I replaced them all. This is the SPDT(single pole. Double throw(On/On) switch. Miller gets about a hundred bucks for one! The DPDT switch(which i do not have) they get $150. That's crazy. Anyway. If you broke the toggle off one of yours, here's a chance to get an OEM one with the proper paddle for something less than ridiculous. Working condition of course. T E R M S: QUESTIONS: Please ASK QUESTIONS in a timely manner(not an hour before auction ends) WARRANTY: This item is SOLD AS-IS without warranty. No return or refund. Please check my feedback. PAYMENT: PayPal ... morewithin 3 days of auction end. SALES WITHIN NEW MEXICO are subject to 7% tax. FEEDBACK: You are encouraged to leave feedback indicating that the transaction has been completed to your satisfaction. I will reciprocate. Despite best efforts. Occasionally an unforseen issue arises. If there is any issue, please allow me the opportunity to work with you to provide a satisfactory resolution prior to leaving feedback of any type. A little communication goes a long way. T E R M S: QUESTIONS: Please ASK QUESTIONS in a timely manner(not an hour before auction ends) WARRANTY: This item is SOLD AS-IS without warranty. No return or refund. Please check my feedback. PAYMENT: PayPal within 3 days of auction end. Please pay promptly so I can ship and deliver quickly. If you need extra time. It's better to give me a heads up in advance. I'm generally agreeable to most requests. SALES WITHIN NEW MEXICO are subject to 7% tax. FEEDBACK: You are encouraged to leave feedback indicating that the transaction has been completed to your satisfaction. I will reciprocate. Despite best efforts. Occasionally an unforseen issue arises. If there is any issue, please allow me the opportunity to wor
|
|
|
Miller Dialarc HF CC AC/DC Welding Power Radiator-1 and RFC 23a foot control tig
YOU ARE LOOKING AT A USED MILLER HF CC AC/DC WELDING POWER SOURCE WITH A MILLER RADIATOR- 1 COOLING SYSTEM AND A MILLER RFC- 23 FOOT CONTROL PEDAL For SMAW and GTAW Welding 250 Amperes. 30 Volt DC@ 40% Duty Cycle(See Specs) Single Phase Input Power Overload and Thermal Protection High Frequency Switch AS IS OR MAKE OFFER a;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-141e7cbd7b3-0xf9-
|
|
|
Miller Tig 430 or 330 Welder Used Current Control Panel Parts
SOTTOF SALES Comes as shown. Used untested take out from Miller Model 430/B/SP Serial Number P340737, some parts from this machine also fit the 330 Model series. Please look carefully at the photos as this is what you will receive. D3626.10 EBAY AUCTION POLICIES: International Bidders Please Inquire About Shipping Cost Prior To Bidding All Bidders-If Win More Than One Auction Please Do Not Pay Until I Have Sent You An Inoice Otherwise I will Not Be Able To Combine Shipping Cost. Payment via Paypal. Must be received within seven days or item will be relisted. Failure to collect any items purchased within seven(7) business days from end of auction shall deem the item abandoned by the awarded bidder(unless other arrangements have been made with us, just call or email) Any deposit or payment issued by that bidder is considered non-refundable. ... moreIf the item(s) is/are abandoned, we may exersise the right to relist or re-sell the item. Smaller items will be shipped via Priority Mail larger items will ship Fedex Ground. Items over 150 lbs. Must ship via Truck Freight. Please read the description carefully for any additional charges for packing, crating, storage, etc. International buyers please do not ask me to misrepresent facts on customs forms. California buyers will be charged local sales tax. I will combine shipping as much as possible so if you win several small items please do not pay until I have sent you an invoice. Please be sure to check my You may be interested in on eBay.regulary for machine tool parts. Accessories and general industrial surplus. Powered by
|
|
|
12 1/2' WP-17 Tig Welding Torch Miller Dynasty 200dx Thermal Arc 185 186 Demo!
You are bidding on a used 17 series tig torch with 12 foot superflex cable. The torch has been tested and works great. The long back cap is included. This torch features a 35mm(1/2" dinse connection and a 5/8-18 side gas connection. Can be used on your Miller welders such as a dynasty(no diversion) and Thermal arc welders and any welder that uses a large dinse and 5/8" gas fitting. We can also customize this torch to fit your welder. Just email us for a price quote. THIS IS A NO RESERVE AUCTION! Buy in confidence from HTP America. Inc. your total welding specialist since 1981, where for over 30 years all we have sold are quality welding supplies at affordable prices. Call us at 1-800-USA-WELD(800-872-9353) or send an e-mail if you have any questions on this product. 1 time item- print room HAPPY BIDDING!
|
|
|
MILLER SYNCROWAVE 200 DIGITAL AC/DC WELDER- STICK WELD OR TIG WELD
You are bidding on a Miller Syncrowave 200 Digital AC/DC Welder. Stick weld or tig weld. It has all cables and a gas regulator, plus extra tungsten tips and 2 tubes of aluminum rods. This welder was used less than 1 hour and is in excellent condition. I bought an aluminum mig welder and do not use this any more. Local pickup only. Thank you and Good Luck Bidding! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1431c747311-0xd7-
|
|
|
Miller 330ST Aircrafter 300 ST TIG STICK Aluminum Welder
Paypal. Visa, Mastercard, American Express. We would like this transaction to be a great one for you so please read the following: By placing a bid. The bidder agrees to the following terms of sale. The winning bidder assumes unlimited(all) liability with the item(s) and its use(s) there is"no" product merchant warranty offered with the item. Sold-as-is. The item that is pictured in this listing is exactly what is being sold and the item that you will receive. Everything that we have for the item is shown in the photos of this eBay listing; this includes all available options that this item has built into it. If you have any questions about the item please ask before bidding. Our phone number is(484) 918-0070. We are a registered business as well as a licensed auction company in Pennsylvania. Miller 330ST Aircrafter 300 ST TIG Stick ... moreAluminum Welder DESCRIPTION: ~ Up for bid is a good working Miller 330ST aircrafter TIG welder. 200/230/460V powered. This welder is AC/DC and has high frequency for TIG welding. We tested this welder with our own Miller TIG torch and it welded really good. The freight shipping weight is 900lbs on a secured pallet. If picking up locally. We can load your vehicle with the forklifts. We palletize and/or load the freight trucks for free. Freight Shipping Calculator Fill out the fields below and press the orange button to get instant rates. Enter Your U.S. Zip Select Location Type Business with Dock or Forklift Business without Dock or Forklift Construction Site Convention Center or Tradeshow Residence Terminal The quote is a"rough estimate" for freight shipping. It takes a moment for the calculator to load a quote. The carrier that is presented in the quote may not necessarily be the one used at the time of shipment. gsrx_vers_525(GS 6.6.5(525)
|
|
|
TWECO TC900V TIG WELDER WATER COOLER CHILLER - 115V - LINCOLN MILLER BERNARD
The following is a TWECO TC900-V water cooler for a TIG welder. It's in great cosmetic shape with no dents or dings. I've tested it and it works smoothly with no funny noises etc. Specs are shown in the pictures. Approximate overall dimensions are 18" long x 9" wide x 12.25" tall. This is a quality welding cooler. Make me a reasonable offer I can't refuse! PAYPAL(Ebay no longer allows me to accept American dollars unless the item is picked up in person) Items must be paid for within 7 calendar days of auction end(if you need a few more days. Just let me know) After 7 days I must file a non-paying bidder report in order to retrieve my fees from ebay. ~~~SUPER-FAST SHIPPING! ~~~ ITEMS PAID FOR BY 12 NOON WILL NORMALLY SHIP OUT THE SAME DAY! This can mean you will get your item in 2-4 days! See my feedback for positive ... morecomments on fast shipping& packing! I ship Via USPS and UPS(my choice) depending upon the item being shipped and I pack your items very carefully. All shipments are sent confirmed delivery but if the buyer requires insurance they should contact me. Return shipping: If I made a mistake(Rare. But it happens) I'll pay the return shipping. If it wasn't my fault, the buyer can pay for the shipping. I try to describe everything I sell as honestly as possible and my feedback reflects this. Due to the unique& vintage nature of the items I sell it is sometimes hard to describe every flaw. If you should have a problem upon receiving your item and you are not happy. Please contact me with any concerns you may have. FEEDBACK NOTE: Feedback is now very important for sellers on Ebay. If you were satisfied with my service PLEASE take a second to give me a good star feedback rating. This will enable me to continue to keep costs down and prices reasonable. I will automatically leave you positive feedback in return. Thank-you! I am located in: Panorama City. Los Angeles, Ca, 91402(Local pick-up is only allowed on bulky items)
|
|
|
Miller Hf 251-D high frequency arc starter tig aluminum welding w/ torch
CREDIT CARD PAYMENT OVER THE PHONE OR PAYMENT IN PERSON AT TIME OF PICK UP ARE THE ONLY FORMS OF PAYMENT ACCEPTED ON THIS ITEM. THAT IS OUR POLICY ON ITEMS OVER $500 Selling a Miller HF251-D high frequency box for tig welding. Unit can be used to turn your stick welder into a high frequency tig welder. Or adding high frequency to your existing tig machine. Just removed from service and works fine. Includes about a 20 foot tig torch, argon hose, and the quick connect pigtails to hook to your welding machine. Case has some dent in it as you can see. Great chance to get a good deal. FEEL FREE TO CALL US AT ANY TIME WITH QUESTIONS. WE WILL BE GLAD TO DO WHAT WE CAN TO ANSWER. 717)926 3975. FLAT RATE SHIPPING OF $100. PLEASE FEEL FREE TO CALL US AT 717-926-3975. THANKS, CENTRAL PENN MACHINERY
|
|
|
Miller,Millermatic,Gun,wc3,SPOOLMATIC2,Lincoln,Hobart,Tig,Welding,Mig,Tig Gun,
THIS AUCTION IS FOR A MILLERMATIC WC-3 WELDER WIRE FEED UNIT WITH SPOOLMATIC2 FEEDER GUN Wc-3 Weld Controle Box MILLERMATIC MODEL WCII SPOOLMATICII FEEDER GUN RATED 200 AMPERES 100% DUTY CYCLE WIRE DIAM CAPABILITY.030- 1/16" 0.8- 1.6mm) ELECTRODE WIRE FEED SPEED 80- 950 IPM( 2- 24 MPM) 25 FT+- LEAD Weld Controle box is bent and dented but works perfectly I got this when i bought my Hobart 250 Tigwave but i dont need it.Great for making signs,boxes or long pieces ect. AS PICTURED
|
|
|
MILLER TIG WELDER 903367 CC AC/DC Welding Power Source EconoTig with Cart USA
For your consideration is a Miller EconoTig Tig Welder CC AC/DC Welding Power Source in excellent working condition*This Unit has just been Serviced and the Main Circuit board has been replaced. Model: ECONOTIG CC AC/DC Welding Power Source 230 Volt 1Ph 52 Amp Set up for 230V with 50 Amp Plug Stock: 903367 Serial: KG190777 Included: EconoTig Welder. WeldCraft WP-17 Tig Torch and hose, Gas Regulator, Flow meter and hose, Miller RFC-14 Foot Pedal Amp Control with Long Heavy Duty Cord, Heavy Duty Miller Universal Carrying Cart and Cylinder Rack#042 93, Original Ground Cable in Excellent condition Specs: This unit is located in Encinitas( San Diego) CA and is available for local pick up
|
|
|
MILLER MAX STAR STL 150 STICK / TIG WELDER DC WITH TIG KIT NICE IN CASE
I AM SELLING A MILLER MAX STAR 150STL STICK AND TIG WELDER KIT IN CASE. IT IS USED BUT IN NICE SHAPE AND ALL IN GOOD WORKING ORDER. THEY GO FOR $1500-$1700 NEW.
|
|
|
Miller Coolmate 4 water cooler tig mig welder 042288 (EXC. COND)
Miller Coolmate 4 water cooler chiller works perfect- no leaks- no damage- like new condition Miller Coolmate 4 Tig Water Cooler 042288 The best performer in its class. The tough. One-piece case is portable and rustproof. A carrying handle and filler spout are molded into the case. Cools tig torches and mig guns rated up to 600 amps. Stock Number Motor Input Voltage Amps Input Full Load Maximun Cooling Capacity Tank Capacity Dimensions Net Weight( 042 288) Coolmate 4 115 VAC, 50/60 Hz. 4.7 A 60 Hz. 18.000 BTU/hr at 5.9 qt/min( 5.6 L/min) 4 gal( 15 L) H: 16 1/4" 413 mm) W: 15 1/4" 387 mm) D: 18 3/4" 476 mm) 44 lbs( 20 kgs) FREE LOCAL PICKUP Steve 386-308-3908 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-1436f88198f-0x100-
|
|
|
Miller Model HF-15-1 500A High-Frequency Arc Starter,Single Phase TIG INV=13435
CLICK ON THUMBNAILS TO VIEW FULL SIZE PICTURES* For sale is a Miller Model HF-15-1 High-Frequency Arc Starter. Stock No.900 320, Style No.HE-6. 1/60/115V Single phase AC input power. Rated welding amps: 500 at 60 percent duty cycle. Please review the photographs to see various views of this item, as well as all OEM information printed on it. Comes with approximately 8-feet of AC input wire and standard 3-prong outlet plug. NOTE: I have performed a basic test on this Miller High-frequency Arc Starting Attachment, and it is in good operating condition; ready to return to work. The tungsten electrodes in the unit look good and make vigorous arcing, as they should. No foreign bidders. No exceptions. NO CANADIANS. The goods are sold from the State of Illinois and any disputes arising out of this transaction shall be governed by the laws of Illinois ... morewithout giving effect to the principles of conflicts of laws. Bidder consents to the exclusive jurisdiction of Illinois courts. I combine shipments. I charge Illinois sales tax on all Illinois transactions. Local pickup is always available. Please do not show up at my warehouse without an appointment. There is no charge for local pickup. Buyer agrees to pick-up items paid for. Within 45 days of payment, and further understands that storage beyond reasonable time damages the seller. Items paid for and not picked up 45 days after payment. Or when the ebay auction expires, whichever comes first, are forfeited as abandoned and as payment for storage costs and liquidated damages, with no refund given. Buyer assumes responsibility to ensure safety of this item. The seller is unable to make any guarantees regarding safety of this item.
|
|
|
Miller Electric Diamond Back TIG Torch 17V
UP FOR AUCTION: We have available a Very useful Miller Electric Diamond Back TIG Torch- 17V This is a used item in good condition. Does have some surface scratches. Don't let this deal pass you by! We Only Ship to the United States. No International Bidders Please. Please View ALL Pictures& Ask ALL Questions Before Bidding. Thanks for shopping with us! Check out our other great auctions too!
|
|
|
MILLER INTELLITIG 4 PRECISION TIG CONTROLLER, 115/230VAC, 1/0.5A, 1-PHASE
Inventory Number: 12130960044 Manufacturer: Description: MILLER INTELLITIG 4 PRECISION TIG CONTROLLER. 115/230VAC, 1/0.5A, 1-PHASE Capacity: Model Number: Serial Number: Additional Information: USED. QUANTITY: 1, WIRES CUT FOR REMOVAL FROM MACHINE BEING SCRAPPED BY BIDDING YOU AGREE TO THE FOLLOWING TERMS: Payments& taxes: Payment MUST be received within 5 business days of auction end.Unpaid cases open automatically on the 8th day. Buyer pays calculated USPS/UPS charges. We do not charge handling fees for auction items weighing 50 pounds or less. We only accept PAYPAL for our Auction Items. We collect sales tax for the following states: MA. MI, OH, PA, IL, TN, RI. If you are tax exempt please contact Anna and supply us with a tax exempt form via fax or email.The invoice will automatically charge tax and you will need to notify us at time ... moreof invoice to have it removed. We do NOT offer Buy-It-Now pricing on auction listings. SHIPPING: We ONLY combine items purchased within the same calendar week(Monday thru Friday) We cannot issue shipping refunds after payment has been made. To receive the combine shipping rate you must pay after being invoiced. Payment MUST still be received within 5 business days of auction end. All items over $100 will Require UPS signature Confirmation. Local pick-up of items is permitted Monday thru Friday 8am-3pm.Holiday hours vary please call) Saturday pick-up requires 24 hour notice, Items MUST be picked up within 14 days of auction end. We do not falsify customs declaration values of purchased items for international shipment.cross-border buyers are responsible for any customs duties. Taxes, etc. imposed by the buyer's home country. Return Policy: Items MUST be returned for any Refunds. Buyer pays return shipping. We do not cover original shipping cost. We do not offer partial refunds. Refunds will be given as money back. Items may be returned for any reason. Complete item must be returned within 30 days of the end of auction in the condition it was received for a full refund, we
|
|
|
Miller Coolmate 4 Tig Water Cooler ,Brand new pump ,free shipping ground
You are bidding on a used Miller Coolmate 4 Tig Water Cooler.Brand new pump, The unit have scratches and blemishes. No extra accessories or Manual is included. Please look at the pictures that are attached. You will only receive what you see in the pictures. Any questions please email me before you purchase. I have two for sale your bid is for each.The two units have the cords repair,the pump is new. Note the free shipping is only for the lower 48 states.All others please inquire first. Payment should be made no later than 5 days after the auction ends. Texas Residents Pay 8.25% sales Tax Local Pick ups are welcome with Cash on hand only. All items must be shipped. Picked up, or removed within 7 days of the end of auction"unless pre-approved via ebay message system" Items left after this time will be subject to a $20 per day storage ... morefee. The buyer will forfeit the item- and any payments made- when storage fees reach either the sale price of the item or a time period of 30 days from the sale of the item. Whichever comes first. No money will be returned for forfeited items. Without notice, items are subject to relisting immediately upon forfeiture. For items that have incurred storage fees, electronic payment of the fees due will be required for the item to be shipped or released for pickup. If you have reason for a delayed pickup please let me know.
|
|
|
Miller RFSW-10/20 195784 Tig Welding Foot Control Pedal For Welder 043 729 LA-31
Miller RFSW-10/20 195784 Tig Welding Foot Control Pedal For Welder 043 729 LA-31 SPECIFICATION Bullseye Catalog# 44749 Brand: Miller, Model: RFSW-10/20, Weight: 6 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an ... moreappointment if you wish to inspect an item. INDIANA SALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click
|
|
|
MILLER SYNCROWAVE 350LX TIG RUNNER SYSTEM WITH COOLER
MILLER SYNCROWAVE 350LX TIG RUNNER SYSTEM WITH COOLER and electrical box connection. Used for 1 season. Local pickup only. Call Sal for more information 609-774-2883.
|
|
|
Miller Dynasty 300DX TIG Welder 300 DX
Miller Dynasty 300DX Welder Here we have a Miller Dynasty 300DX Welder in very good used condition. This unit was recently purchased from a local government facility which was removing excess. Working welding equipment. Miller Dynasty welders feature advanced inverter technology for the most flexible AC/DC TIG/STICK solutions in the welding industry. Compact designs offer superior arc performance and control that set new standards for productivity and weld quality. While lowering the cost of installation and operation. Very good working condition. Includes only the welder. No cables or other accessories included. BE SURE TO CHECK OUT OUR PHOTOS! YOU WILL BE RECEIVING THE EXACT ITEM SHOWN. Please contact us for a freight quote prior to bidding! Please include your zip code and tell us if we will be sending to a business or residential address. ... morePlease also let us know if you have a dock or fork lift available. We will work hard to get the best possible freight quote for you! THANK YOU For considering our item! We have been selling on ebay for over 12 years! Bid With Confidence!
|
|
|
MILLER COOLMATE 3 FOR TIG AND MIG WATER COOLING
Miller Coolmate 3 This item has been tested and runs great making sure that it will last a life time. The Miller Coolmate 3 is a compact horizontal design allows stacking and convenient mounting. Its made out of a polyethylene- modeled coolant tank. Fan shroud and filler spout also rust proof. Thermally protected 1/4 HP motor guards against overheating. Specifications Input Volts:115 Amperes: 5.9 Phase 1 Hertz: 50/60 3 gallon coolant capacity Serial Number: LG070137F Stock Number: 043007(ANY QUESTIONS OR CONCERNS PLEASE CALL GARY 216-905-9353)
|
|
|
Miller Tig Welder RFCS-RJ45 Foot Control - Barely Used
Item you are bidding on is a nice used foot control for Miller tig welders. P/N- RFCS-RJ45 and was used with the Diversion 165 unit. I sold the welder and forgot that I had it in the shop on the shelf. Used very little. Maybe an hour or so. Excellent condition. Buyer agrees to have item paid for within 7 days or negative feedback will be posted and notification to Ebay. If you have any questions, make sure you ask prior to purchase. Item will be shipped within lower 48 States only. I will package and ship the foot control unit for free within the lower 48 States.
|
|
|
Linde UCC-305 TIG Welder with Miller cooling unit
WE ACCEPT PAYPAL AND ALL MAJOR CREDIT CARDS Please call us for Direct Credit Card Payments: 818) 241-2265 Office Hours are Mon-Fri 9am-6pm and Saturdays from 9am-2pm We are located at 4587 Brazil St. Los Angeles. CA 90039 Local Pickup is also Welcome! DESCRIPTION_ Lende UCC-305 TIG Welder with Miller cooling unit_ Details: Untested. But worked when removed from facility Comes with Miller Coolmate and Foot Control. SOLD AS-IS Please see my pictures for more details on the cosmetics of the item for sale. Approx. 1000lbs 40" x 48" x 366" LCW SP 21514 20. Shipping: Shipping to the United States will be Unavailable. Freight or Local Pickup only. Contact us for a quote We ship worldwide Hawaii. Alaska, Puerto Rico, and International Customers, Please contact us for a quote LOCAL PICK UP IS ALWAYS WELCOME! PAYMENTS_ WE ACCEPT PAYPAL ... moreAND ALL MAJOR CREDIT CARDS Please call us for Direct Credit Card Payments: 818) 241-2265 Office Hours are Mon-Fri 9am-6pm and Saturdays from 9am-2pm SHIPPING_ Packages are usually shipped within 5-Days of payment receipt(excluding Saturday/Sunday) All orders are shipped via FedEx and USPS. International buyers. Please be aware that you may incur a brokerage and/or customs fee upon delivery. Winning bidder is responsible for shipping charges. We reserve the right to choose carrier based on shipping method selected at time of payment. Combined shipping is done at the seller’s discretion. If you purchase more than one item from us. They may arrive in separate packages. RETURNS_
|
|
|
MILLER COOLMATE 3 FOR TIG - WATER COOLING - GUARANTEED!
Selling a Coolmate 3 Tig Torch water cooler. Works flawlessly and was well maintained during use(I should know I was the quality control manager that was in charge of maintaining equipment) It was only taken out of service due to upgrading to a machine with an integrated cooler. I guarantee this unit to work as designed or I will pay for the shipping back to me and then refund your money! The Buy It Now is priced below what these normally close for! If you need a cooler. Grab it! You will not be disappointed.
|
|
|
MILLER COOLMATE V3 VERTICAL COOLING SYSTEM 115V FOR MIG AND TIG WELDING
The distinct. Vertical design of the Coolmate™ V3 allows you to mount it onto a power source running gear or gas cylinder rack. The Coolmate™ V3 is equipped with a power switch so you can turn the unit on and off at the front panel. Paddle wheel" indicator makes it easy to see coolant flowing. Filter and coolant filling spout are conveniently located for easy access. Features: 14.000 BTU/hour cooling capacity, 3 gallon coolant tank, For water-cooled torches rated up to 500 amps, Vertical design mounts easily onto running gears and cylinder racks, Paddle wheel flow indicator, Panel-mounted on/off switch, Specs: Input AC Voltage 115V, Tank-Capacity 3.0 gal,
|
|
|
Miller welder tig hitch cover. Very rare.
Made of aluminum. In nice shape.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1449f57d6f6-0x100-
|
|
|
Miller Syncrowave 351 CC AC/DC Tig Welder
Miller Syncrowave 351 CC AC/DC Welder Serial KG095699 300 amp Shipping weight 600 lbs estimated Shipping size 55" tall. 52" long, 26" wide Single Phase 200/230 or 460 volt operation(151/131/67 amp power draw) FOB Bentley. Louisiana Loading on buyer's transportation no charge Item sells used. As-is Has water cooling system. Tig torch, a power cord for electrical hook up, and ground lead On a nice cart for ease of movement around the shop A very complete little package Shipping charges are the affair of the buyer Can be inspected during normal business hours. And 48 hours notice needed before showing up to get item pinpointmachine.com is where to find us NOTE: Item ran until late 2013 at a shop I know. By the time I got there to get it. It was taken out of service. They say it works, and I have had a good past with this company. ... moreBut, since I haven't seen it work, I would allow it to be returned, if something obviously caused by the buyer isn't wrong with it. 10 days limit, and no other reason but a believable fault with it as it was sold will be accepted. Mutual respect of buyer and seller is what I am addressing here. Thanks for looking.
|
|
|
OLDER HEAVY DUTY MILLER TIG WELDER - Cooling pump, 100lb Argon, etc
I've had this welder for over 20 years and have yet to come anywhere near it's welding potential. I bought it used from a shop a long time ago and have used it to weld aluminum. Steel, and stainless steel at my house only. It is 220 vac single phase. The machine comes with an external coolent pump station, 100lb Argon tank(almost empty! remote foot pedal, lots of rods in all three metals, and a drawer full of tungstens& sheilds in various sizes from small to large. You can weld anything with this machine. PS Very very heavy and large. This welder is located in Mattituck, Long Island, New York, 11952. If you have any questions please call Bruce at 631 553-5388. Thanks! 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-144aa8a6252-0x110-
|
|
|
MILLER SYNCROWAVE 180 SD TIG WELDER 907054 CC AC/DC NO TANK
MILLER SYNCROWAVE 180 SD TIG WELDER 907054 CC AC/DC NO TANK 45x45x40 SKU: WELDR1410YV088-FLOOR-FS-HOST1. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Miller XMT 304 tig/mig welder unit
Complete unit XMT304 cc/cv welder with miller 22A wire feeder and Coolmate 3 water cooler. Is set up on double bottle cart. comes with mig gun and tig torch. Foot pedal, ground, and gage for gas. This unit runs great, had for a little over a year. Selling off excess equipment not used. cooler is 110v and welder is 230v single. Unit is set up ready to run. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-144be6623ad-0xf5-
|
|
|
Miller Dynasty DX200 DX 200 Tig Welding Inverter Welder Machine w/contractor KIT
Miller Dynasty DX200 Machine in EXCELLENT Condition. Used by an individual for One and only Classic Car restoration. Has never been used in a business shop. Very low hours of use. Purchased new from Luke Auxier Weld Mart in the United States. I am the original owner. What you see in the pictures is what you will get. It includes SSC Foot Control. Special Weldcraft torch and Miller Elite Automatic Helmet. Arc welding outfit is included in contractor kit. Various assortment of tungsten come with the unit. Again the unit is in excellent condition and only worked with Pure grade Argon Gas( NA50 named in Europe) After your purchase you will be informed of every step of shipment status. You will receive 2 packets. One the main unit and one with the accessories. All at your door within 10 working days. Free shipping What you will need to put the ... moremachine in use: 1. Replace the European plug with an American plug either single phase or 3 phase. European plug will not be included) 2. Replace the Hexagon European gas inlet on gauges with an American thread one. 3. Add new batteries on helmet. Thanks for looking. PLEASE NOTE: I ONLY SHIP MACHINE to USA. CANADA& European Union. NO Exceptions.
|
|
|
miller tig pedal rfc-23a tig welder pedal amp controle RFC-23A
what i have is a miller tig machine pedal in good working order. This pedal is for a machine that uses higher voltage for switches and amperage control. it has been tested and works fine and has both plugs that are twist lock. i believe the cords are 25 feet, these are about $300 new, but are built solid and last for years. winner of auction must pay within 72 hours of ending. No refunds returns or exchanges. thank you and happy bidding.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-144e427b8f3-0x107-
|
|
|
NEW, MILLER COOLMATE V3, TIG WELDER COOLER , TIG COOLER
YOU ARE BIDDING AN A NEW. MILLER COOLMATE V3, TIG WELDER COOLER, TIG COOLER THIS IS THE TOWER TYPE THAT STANDS NEXT TO YOUR TIG MACHINE 110 VOLTS NEVER USED 34-HIGH X 10 X 10 WILL WORK ON ANY TIG WELDER MADE IN USA ANY QUESTIONS PLEASE ASK! WILL SHIP TO CANADA! PLEASE LOOK AT MY OTHER LATHE AND MILLING MACHINE STUFF FOR SALE. LOCATION SHIPPING IS DASED ON YOUR ZIP CODE WITH WEIGHT AND SIZE OF PACKAGE IF YOU HAVE A BETTER WAY PLEASE LET ME KNOW I DONT CHARGE FOR PACKING YOUR ITEM IF YOU WONT INSURANCE PLEASE LET ME KNOW THAY COST EXTRA. ANY PRIBLEMS PLEASE CONTACT ME COMUNICATION IS THE BEST I WILL POST CONFORMATION NUMBER WHEN ITEM SHIPS. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-144f0f23e2c-0x134-
|
|
|
MILLER TIG WELDING PEDAL MILLER 330 TIG WELDER PEDAL
HERE IS A PEDAL OFF OF A MILLER 330. HAS A DENT ON BOTH SIDES OF IT. WORKED FINE WHEN HOOKED UP. READY TO GO. SELLING AS IS WHERE IS JUST BECAUSE IT IS USED AND NO RETURNS. IF YOU HAVE ANY QUESTIONS PLEASE FEEL FREE TO EMAIL ME AT ANYTIME THANKS FOR YOUR INTEREST AND HAPPY BIDDING!
|
|
|
MILLER SYNCHROWAVE 250 AC/DC TIG, Stick Welding machine w/torch/pedal/gnd
GREAT MACHINE. HATE TO LET IT GO, AS IT IS A LOW TIME EXCELLENT MACHINE, YOU WILL LOVE IT, COMES COMPLETE WITH WATER-COOLED HAND TIG TORCH, FOOT PEDAL, GROUND WIRE/CLAMP PLUMBING FOR A WATER PUMP(NOT INCLUDED) AND THE ARGON REGULATOR/HOSE. PACKED ON A PALLET READY TO SHIP VIA THE TRUCK OF YOUR CALLING, WE CAN LOAD Syncrowave 250 Complete(Air Cooled) Syncrowave 250 AC/DC Power Source 12.5 ft(7.6 m) TIG torch 15 ft(4.6 m) work lead w/clamp Gas hose Regulator/flowmeter Cable cover Welding Capability Not to scale Aluminum Min. 0.015" 0.4 mm) Steel Min. 0.012" 0.3 mm) Aluminum Max. 1/2" 12.7 mm) Steel Max. 5/8" 15.9 mm) HF Start™ for customized arc starts allows the operator to choose from three different starting conditions to optimize the application according to tungsten diameter and material thickness. Squarewave output ... morewith AC balance control features adjustable penetration and cleaning action while increasing arc stability on various aluminum alloys, and helps eliminate tungsten spitting and arc rectification. Fan-On-Demand™ operates only when needed reducing noise, power consumption, and the amount of airborne contaminants pulled through the machine. Lift-Arc™ start provides TIG arc starting without the use of high frequency. LVC™ Line Voltage Compensation keeps output of the power source constant regardless of fluctuation in input power ± 10% Adaptive Hot Start™ for Stick Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion. Process TIG(GTAW) Pulsed TIG(GTAW-P) Stick(SMAW) Applications Industrial to Heavy Industrial Applications Precision Metal Fabrication Maintenance and Repair Light Manufacturing Heavy Manufacturing Aerospace Shipbuilding Tube and Pipe Vocational Specifications Input Power Requires 1-Phase Power Runs on 230 or 460 Volt Rated Output 250 A at 34 VAC, 40% Duty Cycle 200 A at 32 VAC, 60% Duty Cycle Welding Amperage Range 3- 310 Amps Net Weight 496 lb(225 kg)
|
|
|
25' WP-17 Tig Welding Torch Weldcraft HTP Miller Thermal Arc 185 186 200dx
You are bidding on a demo 17 series tig torch. The 25 foot power cable is NEW. This torch has a CK rigid 17 head. Long back cap, 25 feet of our superflex cable and the back end has a large 1/2" dinse and 5/8-18 gas fitting. This will fit a miller dynasty 200dx, thermal arc 185 or 186 and a number of other machines on the market. If you are unsure please ask. This is a NO RESERVE auction. Go to our store and see all the other items we have on auction: http:stores.ebay.com/welders4less Buy in confidence from HTP America. Inc. your total welding specialist since 1981, where for over 30 years all we have sold are quality welding supplies at affordable prices. Call us at 1-800-USA-WELD(800-872-9353) or send an e-mail if you have any questions on this product. SR17-25 3hf n24 1 time item- ebay room.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-14526bd8afc-0x114-
|
|
|
Miller Synchrowave 350 LX TIG Welder
Syncrowave 350 LX TIG Welder Light Industrial Applications: Precision Metal Fabrication Maintenance and Repair Light and Heavy Machining Aerospace Shipbuilding Tube and Pipe Automotive Vocational Processes: TIG(GTAW) Stick(SMAW) Pulsed TIG(GTAW-P) Air Carbon Arc(CAC-A; 1/4" maximum) Amperage Range: 3- 400 Max. Open-Circuit Voltage: 80 VDC Rated Output: 350 A at 34 VAC. 40% Duty Cycle Input Power: 50 or 60 Hz. 1-Phase Dimensions: 46" x 28.5" x 40.5" Weight: 596 lb. The balance control is adjustable to provide additional oxide removal(more cleaning) or less cleaning based on the condition of the material being welded. Syncro Start allows the choice of Soft. Standard or Hot TIG starts based on the application, lead lengths and tungsten size. Dual inline high-frequency points provide intense high frequency for arc starting ... moreand stabilization. Internal machine components are protected from HF interference with additional grounding and filtering for exteded product life. Digital welding meters display both amperage and voltage for viewing of the actual and preset values for greater accuracy and repeatability in your welding procedure. Last procedure recall simpliflies changing your Syncrowave back and forth from aluminum TIG to stainless TIG to Stick welding. One switch makes all the control panel changes.
|
|
|
Used PROFAX MFC-14 Tig Welding Foot Control Pedal & Cable -Miller Welder Lincoln
Hello.This listing is for a good used Profax MFC-14 Tig welder foot control pedal with cable as-shown. NO RESERVE! Please ask ANY questions first! ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Please read the following: I am a one-person operation.So please be patient if you do not get a response asap. I try to get things shipped out within 1-day of receiving cleared payment,at most though 3-days. I will only accept a return if you feel that I did not accurately describe the item. I am not responsible for how long UPS or USPS takes to physically ship the item.Once it leaves my hands I have absolutely no control over how long it takes to get to you. So please do not blame me for problems with UPS or USPS.If you have a problem with them I will try to do my best to help out however I can! Buyer to pay ... morethe actual shipping costs using the provided shipping calculator to determine. Will ship within the USA only. Local pick-up is welcomed and is free. Please ask any questions first. Illinois residents must pay 9. 25% sales tax! I will combine shipping. Please let me know if you have any problems with your purchase. I can not solve a problem if you never tell me that there is a problem!
|
|
|
Miller Tig Foot Pedal Model # Rfcs-5
Style# LA-24 Stock# 043716 Posted with
|
|
|
Miller Welder Dialarc 250p AC/DC With Lincoln Tig Welder Box And Lots Of Extras
Up for sale is a Miller brand stick welder. Its 250p Ac/Dc. On the stick unit: Volts 200[208] 230 460. Amps: 78/68/34. Single phase 60 HZ. Really good shape comes with leads no cracks 40' ground lead 56' stinger lead 25' power cord. Also there is a Lincoln Hi-Freg Tig box. This unit is 250 Amps 80% Duty cycle 115volt 1-3 amps 50/60 hertz. Tig comes with a A/B foot controller. 200 amps C/K tig torch. A Visuweld water cooled Torch also included. Its rated at 350 amps.17 various tig cups. 11 Mixed boxes of Tig rods. Small box carbide electrodes for torch. Also in this lot is 4 steel C clamps and 2 Exact brand Alum ones. New in box extra stinger and ground clamp. 7 boxes of Stick electrodes Mostly#7018 3 boxes are new 2 still have plastic. 3 Pair of welding gloves 2 are new. I only used the tig once Used the stick most of the time. ... moreAny Questions Please Ask: This is pick up only. Thanks
|
|
|
Miller Coolmate 3 Tig Welder Cooler 115 v
Unit works perfectly. Very good condition.
|
|
|
Miller Maxstar 175, cc dc inverter with Miller snap start Tig / Stick Welder
Your bidding on a Miller Maxstar 175 CC.DC Inverter welding power source and a Miller Snap Start high frequency Arc starter. 460 volts 7.4 amperes 5.26 kW 3 phase arc/fig welder. Serial#kf926114 stock#903279 This has been tested and works. I brought to local welding Miller repair and made sure everything works. I have a written summary of test. This unit does not come with Leeds. Peddles, or ground. The wire on the back of the unit shown in picture are the only ones that cone with this unit. Please look at picture carefully and ask question. I will do my best to answer. I know this unit can be converted to 220v. For saftey of shipping It will be special packed which will be an extra $20 on close of auction Buyer pays shipping and handling. If returned buyer pays for all shipping cost back. Unit is sold as used.
|
|
 |