|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
$6.99 Shipping Condition: New Location: China GPIO Breakout Extension Board Adapter Sensor Module for Raspberry Pi Pico. 1 x Refrigerator s tarter (PC). PCB Board Battery Shell set Battery Large Board ... morePCB Circuit Housing Case Set. Lithium Battery Protect Board Circuit Board for Makita 18V BL1830 BL1815 BL1890.
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P331 Coil. Unevalued resistance standard resistor. USED. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 100 Ohm. For sale is one coil) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. I Also I had new devices please take a look them by the link: http:stores.ebay.com/electro-radio-device-high-precision/Resistance-Standards-Boxes-i.html?fsub=3003745013. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 100 P331 100 8 20 2 20 10 0.1 0.025 0.1 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P321 Coil. Unevalued resistance standard resistor. NEW. P321 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 10 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 10 P321 100 15 20 3 20 4 0.1 0.05 0.32 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P321 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 10 Ohm; Accuracy class 0.01 Electrical resistance coil P321 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P321 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P321 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not more than
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P310 Coil. Unevalued resistance standard resistor. NEW. P310 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 0.001 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 0.001 P310 100 20 20 5 20 5 0.1 0.05 32 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P310 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 0.001 Ohm; Accuracy class 0.01 Electrical resistance coil P310 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P310 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P310 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not mo
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P331 Coil. Unevalued resistance standard resistor. USED. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 10 000 Ohm. For sale is one coil) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. I Also I had new devices please take a look them by the link: http:stores.ebay.com/electro-radio-device-high-precision/Resistance-Standards-Boxes-i.html?fsub=3003745013. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 10000 P331 100 8 20 2 20 10 0.1 0.025 0.01 5000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. No
Buy It Now
$6.99 Shipping Condition: New Location: China For Motorola Walkie-talkie GP338D XIR P8668 P8628 Key Board Connection Cable. Solar Panel Double-sided Junction Box 1500V/30A Photovoltaic Connector Box. ... more1 x Refrigerator s tarter (PC). For CORSAIR H55 H75 H90 H80I V2 H100i V2 H115i CPU Cooler Mounting Hardware Kit.
Buy It Now
Free Shipping Condition: New Location: China Black Refrigerator Freezer PTC Starter Compressor Relay QPE2-A15MD3 Assembly. Refrigerator Freezer PTC Starter Compressor Relay QPE2-A15MD3 Assembly. ... more1 x Refrigerator s tarter (PC). Laptop Accessories include laptop AC adapter, portable laptop table, laptop drives and dvd burners.
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P321 Coil. Unevalued resistance standard resistor. NEW. P321 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 0.1 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 0.1 P321 100 15 20 3 20 4 0.1 0.05 3.2 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P321 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 0.1 Ohm; Accuracy class 0.01 Electrical resistance coil P321 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P321 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P321 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not more th
Buy It Now
$25.00 Shipping Condition: Used Location: Ukraine P310 Coil, Unevalued resistance standard resistor. Also we can provide other resistance, capacitance and inductance standards, decade box and other etalons. ... more(It ismax error (accuracy) which is given per manufacturer. ).
Buy It Now
$70.00 Shipping Condition: New – Open box Location: Ukraine P40112 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Device ... moreis designed to transfer of electrical resistance values from standard Р40114 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. Nominal Value: 10 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 5 Ohm; S equential connection 10 7 Ohm; Nominal connection of 1 stage 10 6 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 3 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40112 1 General information about device 1.1. Resistance standards Р40112 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40112( MMEC) in measuring DC circuits. 1.2. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40112 working conditions: ambient temperature(20 ± 5) ° C(for Р40115- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mmHg) 2 Technical characteristics 2.1. Main parameters of standard Р40112 are shown in Table 1. 2.2. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. 2.3. Standard P40112 are restorable. Repairable and multifunction devices. 2.4. Acceptable basic deviation limit of resistance standard Р40112( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmospheric pressure 84-106.7 k
Buy It Now
$90.00 Shipping Condition: Used Location: Ukraine Standard P40111 are restorable, repairable and multifunction devices. Resistance standard’s P40111 ( MPEC)acceptable resistance change (instability )does ... morenot exceed values inp.2.4 and 2.5. after a yearfrom the date of first attestation.
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P331 Coil. Unevalued resistance standard resistor. NEW. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 1000 Ohm. For sale is one coil) Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 1000 P331 100 8 20 2 20 10 0.1 0.025 0.032 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal resistance 1000 Ohm; Accuracy class 0.01 Electrical resistance coil P331 represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Electrical resistance coil P331 operates in liquid environment( capacitor oil, kerosene, o rganosilicium fluid) Acceptable resistance deviation of coils P331 from their nominal values caused by adjustment inaccuracy at temperature of 20°C and power not exceeding nominal: for accuracy class 0.01 is not m
Buy It Now
$70.00 Shipping Condition: Used Location: Ukraine P40113 Multivalued resistance standard resistor analog of LEEDS& NORTHRUP. ESI. Honeywell, IET Labs, but has the same or better characteristics: Resistance ... morestandard Р40113 d esigned: to transfer electrical resistance values from standard Р40113 in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Nominal Value: 100 Mohm; Total measured Value: 1- 100 Mohm; High Accuracy class: 0.01-0.02% Number of main stages: 10; Nominal impedance measure: Parallel connection 10 6 Ohm; S equential connection 10 8 Ohm; Nominal connection of 1 stage 10 7 Ohm; Max Voltage 3kV; MTBF: not less than 1 0.000 hours; The average service: at least 10 years. Number of back stages: 1; Dimensions: 215 x 132 x 255mm; Weight: 2.6 kg. Warranty 12month. Electrical Resistance Transitional Standard Р40113 General information about device Resistance standards Р40113 are designed: for electrical resistance values transferring from model standard in measuring DC currents through parallel- consistent switching of stages( MPEC) for use as multi-valued electrical resistance standard Р40113( MMEC) in measuring DC circuits. Modification climatic type in accordance with GOST 15150: for areas with temperate and cold climates- YXL 4.1, but at standard Р40113 working conditions: ambient temperature(20 ± 5) ° C(for Р40113- 20 ± 10] ° C) relative humidity of 25 to 80% atmospheric pressure 84-106.7 kPa( 630-800 mm Hg) Technical characteristics Main parameters of standard Р40113 are shown in Table 1. Maximum and nominal power and voltage dissipation per stage. Applied to standard. Are shown in Table 1. Standard P40113 are restorable. Repairable and multifunction devices. Acceptable basic deviation limit of resistance standard Р40113( MMEC) from nominal at primary testing( at release from factory) is 0.02% under normal using conditions: ambient temperature(20 ± 1) ° C; relative humidity of 25 to 80% atmosphe
Buy It Now
$25.00 Shipping Condition: New – Open box Location: Ukraine P331 Coil. Unevalued resistance standard resistor. USED. P331 resistance standard resistor analog of LEEDS& NORTHRUP. ESI, Honeywell, IET Labs device ... morehas the same or better characteristics: Nominal values 100 Ohm. For sale is one coil) I sold a more then 70 units of this devices types. That is why now in stock I had units with scratches. Cracks and cleavage of the case and panel. Please take a look the picture. Also I had no enough units with class 0.01. That is why I can send you unit with class 0.02. I will choose the best one used device I had in my stock. It will be tested and 100% workable. I give you a warranty for 1 year. I Also I had new devices please take a look them by the link: http:stores.ebay.com/electro-radio-device-high-precision/Resistance-Standards-Boxes-i.html?fsub=3003745013. Accuracy class: 0.01% It is max error(accuracy) which is given per manufacturer. It’s including nominal of the value. Temperature resistance change, Stability per year, stability per max current include and all other parameters which can affect the accuracy of the resistance standard) Real(typical) error: 0.002% = 20ppm; Accuracy of attestation(calibration uncertainty) 0.001% General characteristics(given by manufactur) Nominal Value Ohm Model Adjustment to Nominal. ppm) Stability per year. ppm) Resistance Change 15-25°C from 20°C, ppm/°C) Power Coef(ppm/mW) Max. Current. A Insulation resistance. Mohm max typical max typical max typical max typical 100 P331 100 8 20 2 20 10 0.1 0.025 0.1 1000 Nominal power: 0.1 Watt; Max power: 1 Watt; Dielectric strength of insulation: 2kV; Height: 170mm; Diameter: 110mm; Weight: 1kg; Hole for thermometer. Operation temperature: 15-25 °C; Relative humidity: 25 to 80% Atmosphere pressure: 84-106.7 kPa(630-800 mmHg) Warranty: 12 month. Electrical resistance coil P331 Represents an exemplary resistance standard and is designed for testing and fitting working resistance coils in DC circuits. As well as exemplary and working( laboratory) measuring devices. Nominal
Buy It Now
$12.70 Shipping Condition: Used Location: Tempe, United States TEKTRONIX 067-0569-00 SWEEP ATTENUATOR. CALIBRATION ACCESSORY FOR TEST PROBE. Click Image To View Full Size Click Image To View Full Size Click Image ... moreTo View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size TEKTRONIX 067-0569-00 SWEEP ATTENUATOR. CALIBRATION ACCESSORY FOR TEST PROBE. This listing is for a test probe accessory. Make: Tektronix, Model/ Part# 067-0569-00, Description: Sweep Attenuator, Includes all/only items pictured. Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, overstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" Products are tested to the best of our abilities. This can include a power-up test. Navigating menus, performing simple operational tests, etc. We do not always have the resources and/or abilities to fully test each item we sell. However, we do guarantee and warranty all of our products(unless otherwise advertised"as is" broken" etc. Our standard guarantee/warranty period is 14 days. This period begins on the delivery date. This gives the customer enough time to receive, inspect, and test the product- to make sure the product is satisfactory. If there are any issues, please contact us. We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is likely not included. That rule applies to"new in box" and"new, no box" items. Sometimes, if the original packaging has a lot of shelf-wear, we will discard it. If you have any questions about thi
Buy It Now
Free Shipping Condition: New – Open box Location: China 1, Pls make sure the model you need is the exact model you ordered. You may also like.
Buy It Now
$3.99 Shipping Condition: New Location: Macon, United States NSN Properties and Flags. Excludes knob; handle, switch; bar actuator, electrical switch and keytop, keyboard. Push ButtonNSN: 5930-01-012-9195 | Model: ... more366-1402-31. Overall Width. Overall Length.
Buy It Now
$12.70 Shipping Condition: Used Location: Tempe, United States TEKTRONIX 011-059 ATTENUATOR. 10X 50OHM 1/2W. Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To ... moreView Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size TEKTRONIX 011-059 ATTENUATOR. 10X 50OHM 1/2W. This listing is for a test equipment probe accessory. Make: Tektronix, Model/ Part# 011-059, Description: Attenuator; 10 x 50 Ohm. 1/2W, Includes all/only items pictured. Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, overstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" Products are tested to the best of our abilities. This can include a power-up test. Navigating menus, performing simple operational tests, etc. We do not always have the resources and/or abilities to fully test each item we sell. However, we do guarantee and warranty all of our products(unless otherwise advertised"as is" broken" etc. Our standard guarantee/warranty period is 14 days. This period begins on the delivery date. This gives the customer enough time to receive, inspect, and test the product- to make sure the product is satisfactory. If there are any issues, please contact us. We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is likely not included. That rule applies to"new in box" and"new, no box" items. Sometimes, if the original packaging has a lot of shelf-wear, we will discard it. If you have any questions about this, please contact us prior to purchasing. Add
Buy It Now
$8.96 Shipping Condition: Used Location: Phoenix, United States TEKTRONIX 011-069 ATTENUATOR. 2X, 1/2W HALF WATT. Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image ... moreTo View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size TEKTRONIX 011-069 ATTENUATOR. 2X, 1/2W HALF WATT. This listing is for a probe accessory. Make: Tektronix, Model/ Part# 011-069, Description: 2X Attenuator; 1/2 Watts, Includes all/only items pictured. Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, overstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" Products are tested to the best of our abilities. This can include a power-up test. Navigating menus, performing simple operational tests, etc. We do not always have the resources and/or abilities to fully test each item we sell. However, we do guarantee and warranty all of our products(unless otherwise advertised"as is" broken" etc. Our standard guarantee/warranty period is 14 days. This period begins on the delivery date. This gives the customer enough time to receive, inspect, and test the product- to make sure the product is satisfactory. If there are any issues, please contact us. We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is likely not included. That rule applies to"new in box" and"new, no box" items. Sometimes, if the original packaging has a lot of shelf-wear, we will discard it. If you have any questions about this, please contact us prior to purchasing. Additional spec
Buy It Now
$12.70 Shipping Condition: Used Location: Tempe, United States TEKTRONIX 011-042 MINIMUM LOSS ATTENUATOR. 50OHM/ 93OHM 1.5W, 50 OHM/ 93 OHM 1.5 WATT. Click Image To View Full Size Click Image To View Full Size Click ... moreImage To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size TEKTRONIX 011-042 MINIMUM LOSS ATTENUATOR. 50OHM/ 93OHM 1.5W, 50 OHM/ 93 OHM 1.5 WATT. This listing is for a probe accessory. Make: Tektronix, Model/ Part# 011-042, Description: Minimum Loss Attenuator, Includes all/only items pictured. Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, overstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" Products are tested to the best of our abilities. This can include a power-up test. Navigating menus, performing simple operational tests, etc. We do not always have the resources and/or abilities to fully test each item we sell. However, we do guarantee and warranty all of our products(unless otherwise advertised"as is" broken" etc. Our standard guarantee/warranty period is 14 days. This period begins on the delivery date. This gives the customer enough time to receive, inspect, and test the product- to make sure the product is satisfactory. If there are any issues, please contact us. We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is likely not included. That rule applies to"new in box" and"new, no box" items. Sometimes, if the original packaging has a lot of shelf-wear, we will discard it. If you have any que
Buy It Now
$12.70 Shipping Condition: Used Location: Tempe, United States NEW Tektronix 011-0057-00 Minimum Loss Attenuator 1/2W. 75 Ohm- 50 Ohm, 011-057 A NEW- OLD STOCK Tektronix Minimum Loss Attenuator. This item includes ... moredata sheet. P/N: 011-0057-00/ 011-057, BNC Male- BNC Female, 75 Ohm Matched 50 Ohm 1/2W Please take a look at all of the provided photos before placing your bid to thoroughly inspect the lot contents and condition. Item Condition: New- Old Stock- Packaging has been opened for inspection& photos. Return Policy: We are offering the buyer a TWO WEEK(14 day) right of return for testing and inspection. Buyer will be responsible for the cost of return shipping. Shipping Info: Shipping weight is 13 ozs. Shipped from the Los Angeles area. zip 90221) Default Shipping Service: USPS First Class Package California residents will be charged 9.00% sales tax. Tennessee residents will be charged 9.00% sales tax. We have offices in both California and Tennessee and are required to charge tax to any shipment sent anywhere in ether state. We accept the following methods of payment: Call 1.800.421.2442 to pay via. credit card over the phone. For foreign orders we accept PayPal. We reserve the right to refuse other payment types at our discretion. We make our decision on a case by case basis. Due to previous problems with some foreign credit cards. After your item has shipped. We will email you the tracking info. ATTENTION FOREIGN BUYERS We will not make false statements on Customs Documents. When you buy an item it will not be listed as a"gift" It will be valued at exactly the price you paid. YOU must be aware that customs duties(Import Taxes) could be due when the shipment enters your country. YOU are responsible for those duties/taxes; know your own country's rates/policies before you buy. Due to the various levels of service and care provided by the different postal services around the world. We cannot guarantee delivery outside the United States. Insurance is strongly suggested or may be required. If the item is returned/rejected from your country for any reaso
Buy It Now
$12.70 Shipping Condition: Used Location: Tempe, United States 3 TEKTRONIX 011-056 ATTENUATOR. 93OHM 1W, 93 OHM 1 WATT. Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click ... moreImage To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size Click Image To View Full Size#3 TEKTRONIX 011-056 ATTENUATOR. 93OHM 1W, 93 OHM 1 WATT. This listing is for a probe accessory. Make: Tektronix, Model/ Part# 011-056, Description: Coax Attenuator; 93 Ohms/ 1 Watt, Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, overstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" Products are tested to the best of our abilities. This can include a power-up test. Navigating menus, performing simple operational tests, etc. We do not always have the resources and/or abilities to fully test each item we sell. However, we do guarantee and warranty all of our products(unless otherwise advertised"as is" broken" etc. Our standard guarantee/warranty period is 14 days. This period begins on the delivery date. This gives the customer enough time to receive, inspect, and test the product- to make sure the product is satisfactory. If there are any issues, please contact us. We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is likely not included. That rule applies to"new in box" and"new, no box" items. Sometimes, if the original packaging has a lot of shelf-wear, we will discard it. If you have any questions about this, please contact us prior to purchasing. Additional specifications a
Buy It Now
$8.51 Shipping Condition: Used Location: Tempe, United States Ten(yes I know 12 are pictured but I'm keeping two for myself) very clean UG-914/U double female BNC connectors
Buy It Now
$7.96 Shipping Condition: Used Location: Phoenix, United States Ten(yes I know 12 are pictured but I'm keeping two for myself) very clean UG-914/U double female BNC connectors
Buy It Now
Condition: Used Location: Oxnard, United States Tektronix Oscilloscope. Model# 475" This particular scope"did not" power up NOTE: I will be selling over the next 32 auctions. Tektronix ... moreOscilloscopes of various models and condition from some listed as sold for parts as I was not able to get it to power up and those I could power up. A select few have manuals* I Do Not Have Any of the Probes! Overall Good Condition for Parts* All Items are Sold As-Is. Insurance is required on all items sold and will be added to the price based on final cost. All items described as new or used and any known condition issues will be disclosed. Combined shipping discounts are available. Second item ships for an additional $4.50. Items you return for a refund must be returned in the box as shipped and documentation of damages from shipping service. Return shipping costs not covered in the refund amount. Smoke Free and Pet Free Home. E-mail me should you have any questions or need for additional pictures. BID SAFE. WITH CONFIDENCE, AND HAVE FUN Check out my! Be sure to add me to your! I do leave positive feedback. So if you were pleased with the auction item and experience with me, I would ask the same from you. ~ Namaste ~. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f3dd834a2-0x103-
|
|
|
 |