|
|
Order by: Available to: eBay Affiliate Links
|
Buy It Now
Condition: Used Location: Fort Mill, United States 15,000 RPM. Manufacture Date November 2014. Spindle Speed. (146) Tool Matrix Style Magazine (Expandable). (12) Pallet Fastems Pallet Ace C-1000 Base System. ... moreSpindle Chiller Unit. Rigid Tapping. Extended Capacity Drain Tank.
Buy It Now
Condition: Used Location: Fort Mill, United States Chip Conveyor (Left Side Exit). 40 - 10,000 RPM. Machine Weight. Spindle Speed. Ethernet Connection. Table Load Capacity. Coolant Wash Down System. Through ... moreSpindle Coolant.
Buy It Now
Condition: Used Location: Fort Mill, United States Chip Auger. 0 - 7500 RPM. Machine Weight. Spindle Speed. Mfg Date May 1998. Two Color Tower Light. 118" x 110" x 119.5". Max Tool Length.
Buy It Now
Condition: Used Location: Fort Mill, United States Mayfran Chip Conveyor (Right Side Exit). Travelling Column Design. Machine Weight. Spindle Speed. 15 / 10 / 7.5 HP AC. Manufacture Date March 1995. Max ... moreTool Length. 4.3" - 24.4".
Buy It Now
Condition: Used Location: Fort Mill, United States 20,000 RPM. 6.9" - 27". Chip Conveyor (Left Side Exit). Spindle Speed. 1000 Blocks / Second Feedrate. 500 Block Look Ahead. 30 Position Side Mount Tool ... moreChanger. Rigid Tapping.
Buy It Now
Condition: Used Location: Fort Mill, United States Spindle Speed. Heavy Duty Box Way Construction. Rigid Tapping. 3.5" Floppy Disc Drive. Graphic Display. Rapid Traverse Rates (X&Y/Z). Table Size. Table ... moreLoad Capacity.
Buy It Now
Condition: Used Location: Fort Mill, United States Rigid Tapping. 10,000 RPM. Spindle Speed. Max Tool Length. Max Tool Weight. High Speed CPU. Spindle Nose to Table Top. Rapid Traverse Rates.
Buy It Now
Condition: Used Location: Fort Mill, United States Two Speed Gearbox. Spindle Speed. 80 Gallon Coolant Tank. 30 Position Side Mount Tool Changer. Manufacture Date November 2006. 12" Color CRT. Coordinate ... moreRotation & Scaling. Rigid Tapping.
Buy It Now
Condition: Used Location: Fort Mill, United States Chip Conveyor (Rear Left Side Exit Hinge Type). Spindle Speed. 24 Position Side Mount Tool Changer. Manufacture Date November 2011. Three Color Tower ... moreLight. Remote Jog Handle. Table Load Capacity. Rigid Tapping.
Buy It Now
Condition: Used Location: Fort Mill, United States 1998 LEBLOND MAKINO A-77. Spindle Speed 20 - 18,000 RPM. Chip Conveyor (Right Rear Exit). Remote Manual Pulse Generator. Spindle Motor 40 / 30 HP AC. ... moreSpindle Taper Cat 50. Rigid Tapping. Helical Interpolation.
Buy It Now
Condition: Used Location: Fort Mill, United States Spindle Motor. Spindle Torque. Spindle Nose to Table Top. Spindle Speed. Spindle Taper. High Torque Spindle. Full Enclosure. 5" - 35.5".
Buy It Now
Condition: Used Location: Decatur, United States Brother CNC TC 321 Drill/ Tap Machine Auto Pallet Changer- BT-30 taper- 6000 RPM- 2) tables. 14" x 12" X travel= 28" Y travel= 12" ... moreZ travel = 10" 10 station ATC- 2 stations not functioning, arms broken) CNC 500 conversational programming. Machine dimensions: 96"L x 76"W x 96"H- Machine weight 7000 lbs. vises in video not included) PARTS FOR 1 STATION ON ATC AS SHOWN IN PICTURE) Watch machine running. Click link below. Programming. Maintenance, Parts list, manuals included. RIGGING(LOADING) SHIPPING COST IS THE RESPONSIBILITY OF THE BUYER! Call CNC Digital for more info. 440-263-1878 SUBJECT TO LOCAL SALE. A $500 DEPOSIT IS DUE IMMEDIATELY THRU PAYPAL. BALANCE DUE WITHIN 3 BUSINESS DAYS. ALL CHECKS MUST CLEAR BEFORE MACHINE RELEASE. WIRE TRANSFER PREFFERED. Terms& Conditions of Sale: ACCEPTANCE: Purchasing equipment from CNC Digital. Inc. the buyer agrees to all the terms and conditions listed and any other terms expressly added to this invoice. PRICE: All Prices are in U.S. Currency(Dollars) Prices are exclusive of state. County or federal taxes. Buyer is responsible for any applicable taxes. SHIPPING: BUYER IS RESPONSIBLE FOR LOADING(RIGGING) AND TRANSPORTATION from F.O.B. point. CNC Digital. Inc. is not responsible for any damage due to weather, rigging, trucking, or any damage involved in transport, loading, unloading or situations beyond CNC Digital, Inc. control. ACCEPTANCE: All Sales are made with the understanding that orders are not subject to cancellation. And that a Payment in Full is REQUIRED prior to machine release. NO WARRANTY: The goods described are pre-owned used goods and are offered"As Is" where is" Seller makes no warranties or guarantees of any kind, either expressed or implied, of merchantability, and fitness for a particular purpose. All specifications, descriptions of equipment should be used as a guide only. It is the buyers responsibility to inspect item(s) and details of machine capabilities prior to bidding or purchase. CNC Dig
Buy It Now
Condition: Used Location: Byron Center, United States Work and Tool Probing System. 2012 Haas VM-2 CNC Vertical Machining Center. Chip Auger. 4th Axis Drive and Wiring. View Phone Number. The machine is being ... moresold "as-is, where-is" with no warranty. Inspections are highly encouraged.
Buy It Now
Condition: Used Location: Fremont, United States TRAVELS (X,Y & Z) 82" x 120" x 12". PERFORMANCE MACHINE TOOLS, INC. TABLE WORKING SURFACE 60” x 96”. Hand Held Remote Jog Pendant. MACHINE RAN ALUMINUM ... morewith COOLANT SPRAY MIST SYSTEM. Remote Start Stop Station.
Buy It Now
Condition: Used Location: Woodstock, United States Haas Editor. ... Included. - 30 Taper 15,000 RPM Direct Drive Spindle ………………………. - Fourth Axis Ready …………………………………………………….
Buy It Now
Condition: Used Location: Alto, United States Asset # 14971. Carlton 12’ x 26” Radial Drill, Model 5A. Feed and Tap Leads (18).004” to. 125”. Bearing of Head on Arm 23 1/4”. Arm Length 12’. Traverse ... moreof Head on Arm 10’8”. Bearing of Arm on Column 52”.
Buy It Now
Condition: Used Location: Toledo, United States All specifications subject to verification, machine in plant and is under power. Machine has under 500 hours on it. Table Size: 165.3” x 80.7”. Spindle ... moreNose to Table: 5.9” - 47.8”. Table Load Capacity: 22,000 lbs.
Buy It Now
Condition: Used Location: Alto, United States We are always looking to buy machinery 1 piece or entire plants.
Buy It Now
Condition: Used Location: Greene, United States PRECISION WIRE EDM VISE STAINLESS GOOD FOR MILLING. GRINDING, EDM WORK IDEAL FOR PARTS IN EDM MACHINES HARDNESS: 55 RC SQUARE AND PARALLEL WITHIN.0002" ... more11.80" LONG DIMENSIONS JAW WIDTH 1.4" JAW OPENING 8" JAW DEPTH 1.57" THIS IS 440 STAINLESS STEEL QUALITY IMPORT 6 AND 4 INCH VISES AVAILABLE AS WELL. CHECK FOR PRICING SHIPPING IS ONLY $17.99! FOR THE IMMEDIATE 48 UNITED STATES. ALL OTHERS REQUEST QUOTES. THANKS FOR LOOKING AND DON'T FORGET TO CHECK OUT OUR OTHER METALWORKING PRODUCTS AS WELL. PLEASE NOTE: MULTI ITEM PURCHASES ARE GREATLY APPRECIATED. HOWEVER. INDIVIDUALLY PAID FOR ORDERS WILL BE SHIPPED AS PAID. IF YOU NEED ADJUSTED SHIPPING PLEASE REQUEST IT, WE WILL BE MORE THAN HAPPY TO COMBINE FOR YOU. WE ARE SORRY BUT INDIVIDUAL SHIPMENTS WILL NOT BE REFUNDED AND THEN COMBINED. SORRY FOR ANY INCONVENIENCE. Payment MATACO INC. accepts: PayPal. Visa, Master Card, American Express, Money Orders, and Cashier Checks as payment of goods purchased in our auctions. All payments must be received within 7 business days. Bidders can call 1-888-785-7810 or email matacoinc@aol.com for further information. Shipping and Handling Shipping weight: 13lbs Buyer pays the shipping& handing charge. Terms and Conditions We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with Ebay. Thank you for bidding. Mataco Inc. appreciates your business very much. Powered by The free listing tool. List your items fast and easy and manage your active items.
Buy It Now
Condition: Used Location: Alto, United States Asset # 11559. Drill Capacity Steel C.I. Drill does not have tapping. Approximate height 78”. We are always looking to buy machinery – 1 piece or entire ... moreplants. Clearance between spindle and standard table, min/max max 26-5/32”, min 8-15/32”.
Buy It Now
Condition: Used Location: Aurora, United States ONE USED -FADAL 6030HT Vertical Machining Center. 21 Position ATC. CAT 40 Spindle Taper. 28” Extended Column. 60” X Axis Travel. 30” x 62” T-slotted Table. ... more30” Y Axis Travel. 30” Z Axis Travel.
Buy It Now
Condition: Used Location: United States HAAS VF-8/50. Vertical Machining Centers. Horizontal Machining Centers. cnc machines. HIGH-SPEED MACHINING. -Y AXIS: 40". New Arrivals. SPINDLE TAPER: ... moreCAT 50.
Buy It Now
Condition: Used Location: Alto, United States Asset # 9871. Carlton Model 5A Radial Drill, 26” x 12’. Feed and Tap Leads (18). 004” to. 125”. Vertical Travel of Spindle in Head 24”. Bearing of Head ... moreon Arm 23 1/4”. Height over Head, Max. Traverse of Head on Arm 10’8”.
Buy It Now
Condition: Used Location: Alto, United States Asset # 12145. Tap Thread Leads 8, 11.5, 4, 18. Swing of Arm 10’6”. Vertical Travel of Spindle in Head 20”. Spindle Radius 27” – 8’ 1 ¾”. Bearing of Head ... moreon Arm 23 ¼”. Face of Column to Center of Spindle 13 ¼ - 8’.
Buy It Now
Condition: Used Location: Byron Center, United States 2015 HURCO VMX64i CNC Vertical Machining Center. Through Spindle Coolant System, Hurco. 64" X-Axis Travel. 34" Y-Axis Travel. 30" Z-Axis Travel. 30 Station ... moreTool Changer. The machine is being sold "as-is, where-is" with no warranty.
Buy It Now
Condition: Used Location: Alto, United States Asset # 13966. Carlton 8’ x 19” Radial Drill, Model 4A. Feeds and Tap Leads (18). 004” –. 125”. Swing of Arm 10’6”. Vertical Travel of Spindle in Head ... more20”. Drills to Center of Circle 16’. Bearing of Head on Arm 23 ¼”.
Buy It Now
Condition: Used Location: Byron Center, United States 2018 Haas ST-30 CNC Turning Center. 135" x 80" x 87" Dim's w/o Chip Conveyor. Chip Conveyor, Belt Type. Part Swing. 3.0" Spindle Bore (per our calipers). ... more12 Station Turret. 9.4" X-Axis Travel. 32.5" Z-Axis Travel.
Buy It Now
Condition: Used Location: United States More Photos Are Available Upon Request By Emailing Us At machine@petersonmachinery.com Or Visiting Our Website REC#2023. 1) Used 2 Ton Nopack C-Frame ... morePneumatic Press; Mfg. 77-2775 Specifications: Capacity.2 Tons Bed Area.12"x 12" est. Stroke.3" est. Bed.Bed-Tapped Ram.Ram-Tapped 1 3/8" piston. Equipped With: Pneumatic Controls. Pressure Regulator Oiler Air Filter. Tooling(various cup dies) Overall Dimensions.40" L-R x 46" F-B x 38" High(est. with pallet Weight.300 lbs(est. Price.$1.250.F.O.B.Casa Grande, Arizona. Please contact us about shipping rates before you request a rate quote though this website- Thank you* For more information you can contact Charles or Danny in one of the following ways: buyonebay@petersonmachinery.com ebay@petersonmachinery.com 520.836.9727 phone 520.836.1944 fax 804 West Gila Bend Hwy. Casa Grande. AZ 85122 About Us: Since 1980 we have used our extensive experience in manufacturing and engineering to evaluate customer needs and provide the correct used machine for the application. With over 400 used metal working machines in stock. We have the largest inventory in Arizona and New Mexico. This includes presses(OBI. Hydraulic, mechanical, platen, straight-side, straightening& extrusion) press brakes, apron/finger/box& pan brakes, blast cleaners, air compressors, boring mills(both horizontal& vertical) chip conveyors, coil equipment(consisting of reels, straighteners, feeders, cradles& levelers) CMM's, parts washers, radial arm drills, drill presses, dust collectors,
Buy It Now
Condition: Used Location: Kenosha, United States Condition is "Used". Approximate Weight 32000 lbs. Loaded on Truck with this price only. MACHINE IN POWER. RS 232 Port & 3.5" Floppy. Rigid Tapping. Remote ... moreJog Handle. 5-AXIS Troyke TDL-15A Trunnion Table.
Buy It Now
Condition: Used Location: Muskegon, United States Model #: H630. Serial Number: 102444 or 98393 or 101832. Mazak Horizontal Machining Center. Manufacturer: MAZAK. Model: H-630. We have no way of testing ... moreit once it was removed. Date: 6/92 or 6/91 or 1/92.
|
|
|
|
11/4-7 PLUG H-4 GROUND THREAD HAND TAP MACHINE SHOP CUTTING TAP TOOL 04489407
UP FOR SALE IS THIS 11/4-7 CUTTING TAP TOOL. MARKED USED BECAUSE IT CAME OUT OF A BIN WITH OTHER USED PEICES. I DON'T THINK THIS ONE HAS BEEN USED VERY MUCH. STILL VERY SHARP. PART NUMBER 04489407. E-MAIL WITH ANY QUESTIONS. SHIPPING CHARGES ARE FOR THE LOWER 48 STATES ONLY. MAKE SURE TO LOOK AT SOME OF THE OTHER BITS AND TAPS I HAVE LISTED FOR COMBINED SHIPPING. PAYMENT IS DUE WITH 4 DAYS OF AUCTION ENDING OR TRANSACTION WILL BE CANCELLED.
|
|
|
WHOLESALE LOT OF 10 USE METAL MACHINE SHOP CUTTING TAP TOOLS 3/8 49/64 7/8 1-1/8
UP FOR BID IS THIS LOT OF 10 MACHINE TAPS. A COUPLE OF 3/8" AND 7/8" ONE 49/64" AND ONE 1-1/8" I CANT TELL WHAT THE SMALLER ONES ARE. ALL HAVE BEEN USED BUT STILL HAVE LIFE IN THEM. A FEW ARE STILL VERY SHARP. E-MAIL WITH ANY QUESTIONS. SHIPPING CHARGES ARE FOR THE LOWER 48 STATES ONLY. MAKE SURE TO LOOK AT SOME OF THE OTHER BITS AND TAPS I HAVE LISTED FOR COMBINED SHIPPING. PAYMENT IS DUE WITH 4 DAYS OF AUCTION ENDING OR TRANSACTION WILL BE CANCELLED.
|
|
|
Mueller EH-1 & H17145 Water Gas Main Pipe Drilling Hot Tap Tapping Machine
Up for sale is a Mueller EH-1 tapping machine with a MUELLER H-17145 completion/extraction Machine both in good working order. They come with extra adapters. Completion plug holders and drills. The EH-1 can be used with EH-5 drill bits and adapters. If you purchase, payment is due immediately. I will ship within 24 hours of received payment. Thanks!
|
|
|
3/8-16 NC 3/8" x 16 Bottom Bottoming Tap - Machine Shop High Speed Steel HSS
3/8-16 NC bottom tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
(1) USA 2 11 1/2 NPT 63 PIPE TAP used machine shop plumbing card c7m nice NR
here is a nice used tap with sharp threads ready to work. no reserve price. email with any?s and high bidder to pay 7.00 shipping. 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-144f3f9d64e-0x10a-
|
|
|
vintage machinist bench vise vice 2 3/4" opening machine shop tap vice
Vintage machine shop tooling vice vise. Measures 7.5" long x 3.5" wide x 3 1/4" tall. One of the mounting tabs has been broken off but im sure theres another way to secure it to bench. I bought this from an estate that had many machinist tools that i am not familiar with. See my other listings too. Handle turns easily. Not sure what else i can say about this item- see photos. Selling as-is because i dont know if its complete or not- you would have to know. I do not work friday thru sunday.i like to spend the weekend with my kids and searching for more STUFF! Also I use parcel post alot more than Priority Mail in order to save you money. And I will also combine shipping for you. Thanks alot and thank you for looking at my stuff.I DO APPRECIATE IT. Linda
|
|
|
Antique 1898 STARRETT Time Saver Drill & Wire Gauge #185 Machine Screw Tap Chart
For auction is this Antique 1898 STARRETT Time Saver Drill& Wire Gauge#185 for sizes 1-60. Includes a chart for Machine Screw Taps. Measures 6-1/4" long by 2-5/16" wide. Good condition. The back has some pitting as shown. FREE DOMESTIC SHIPPING.
|
|
|
ADJUSTABLE LATHE TOOL TAP HOLDER, REVERSE SPINDLE AUTO SCREW MACHINE, SOMMA
note to our buyers: we have sold couple hundred pieces of tooling over the last couple months and have not heard a single complaint to date: so please bid confidently. any issues and we'll refund everything you pay& pay for shipping back. thank you. SOMMA R&L TAP HOLDER. Boring? lathe? TOOL HOLDER This auction is for the SOMMA shown in images from the massive machine shop tooling we are still working hard to liquidate. Comes as shown- that is the actual tool that will be mailed to winner of this auction- if there is any additional parts/pieces that don't go w/ this tool that is attached to it in images. Then it will be included. Model: 0.00( 5/8" shank diameter(more measurement details available in images& feel free to ask any questions you may have) Condition: FANTASTIC IMO- well maintained/ lubricated. Refer to ... moreimages and ask questions for conditions- what you see is the actual unit that will be mailed to winner of this auction. No Reserve $13.84 auction start. Included- any additional tooling. Holders, cutters, bolts or additional parts that you see in images attached to tool being auctioned ARE INCLUDED: Other than rulers used to display measurements) What you see is what you get. Even if there is extras. Please MAKE SURE YOU KNOW WHAT YOU ARE BUYING! ALL MONTH WE'RE LISTING LOTS OF MACHINIST ITEMS AND SOME ITEMS WE MAY HAVE LIMITED PERSONAL EXPERIENCE WITH. WE ARE DOING OUR BEST WITH THE DESCRIPTIONS SO PLEASE LOOK CAREFULLY AND BE SURE YOU KNOW WHAT YOU'RE BUYING IN CASE WE MADE A MISTAKE(IN ANY PART OF LISTING) THERE'S JUST A LOT OF STUFF- SOME IS VINTAGE AND NEVER USED- BOXES FULL OF TOOLING THAT SELL INDIVIDUALLY FOR +$100/EA. WE'RE LISTING THEM FOR $1 AUCTIONS, SO CHECK BACK AND LOOK CAREFULLY! see ad below) Ask any questions prior to bidding. the ad WE'RE LISTING 50 YEARS OF MACHINE SHOP ITEMS FOR $0.99 NO RESERVE! HUGE LOTS MACHINING LIQUIDATION BLOWOUT B O XES& BOXES NE ED T O GO! MORE MACHINING. MACHINE SHOP, METAL WORKING ITEMS BEING LISTED ALL MONTH
|
|
|
Jagermeister Shot Machine Jager Tap Model J99 Holds 3 Liquor Bottles Tested
The things we buy are really amazing. This is a Jagermeister Ice cold Tap Shot Machine. It does not have a tap because it has a dispense button. It can hold up to 3 bottles but one of the orange tap things is gone. It also has cleaning instructions on it. It has been sitting in the store room for several years. So it needs a very good cleaning. It does get cold and seems to work just fine. The manufacturing date on it is 11/2006. It may have to be shipped Fed Ex if USPS wont handle it. If you have any questions, contact me. Also, this can be picked up locally. Don't forget to leave Feed back and I will do the same. We are open Monday. Tuesday and Thursdays, 9 AM-5 PM, Friday 9 AM-6 PM, and Saturday 10 AM-2 PM. Closed Wednesday and Sunday. Do not answer mail or questions on those 2 days. Thank you for looking. Sorry. Cannot be shipped ... moreInternationally. If for any reason. You are NOT happy with your purchase, please contact us and we will work with you to resolve the problem. Thank you.
|
|
|
Jemus Model Shotmeister Jagermeister Tap Machine (MS)
Up for Auction Is A Jemus Model Shotmeister Jagermeister Tap Machine This tap machine is in Excellent Cosmetic and Working Condition and is very heavy! Features: Holds 3 Jagermeister bottles- Compact design- Chills jagermeister to below freezing temperatures- Graphics and logos backlit with LED lighting- Low indicator light- Dimensions: 11"W x 15"D x 26"H(when loaded with 1 liter bottles) Normal operation uses less tahn 2 standard 100 watt light bulbs Happy Bidding! PayPal only transaction. Credit cards through PayPal are acceptable. Virginia residents need to add 5% sales tax. A $3.00 handling fee is placed on SOME of our items which will be used for the boxes and packing materials which we use. Payment is expected within 5 days of the close of this auction. If you have extenuating circumstances on sending payment. Please ... moreemail us immediately. Shipping is based on location and insurance is included in the handling. There are two options for shipment. We either ship by USPS Priority Mail or by USPS Parcel Post along with Delivery Confirmation. Items will be shipped within three business days after payment is received. If you wish to combine shipping on multiple items. Please let us know and we would be happy to do so. Also items will be shipped to confirmed addresses only. If the address is not confirmed. The buyer will receive a refund of the item purchased. International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. AND IF THE ITEM IS ALLOWED TO BE IMPORTED. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up DO NOT confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such beh
|
|
|
Big T33-a T33 P1/8 FT Tap Holder Adapter Fot Lathe Or Milling Machine Cnc
Big T33-a T33 P1/8 FT Tap Holder Adapter Fot Lathe Or Milling Machine Cnc Posted with eBay Mobile
|
|
|
Big T33-a T33 P3/8 FT Tap Holder Adapter Fot Lathe Or Milling Machine Cnc
Big T33-a T33 P3/8 FT Tap Holder Adapter Fot Lathe Or Milling Machine Cnc Posted with
|
|
|
hays wet hot tap tapping machine water mains model B-1 saddles bits mueller
working hays wet tap. Used for water mains. up to 1" tap. 4 saddles 6" 8" 10" and 12" 2 1" bits& 3 3/4" bits case& accessories. see pictures. used daily. not mueller
|
|
|
5/8-11 NC 5/8" x 11 NC Tap - LEFT HAND Machine Shop Quality High Speed Steel HSS
5/8-11 NC LEFT HAND tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~ di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-144ffd835d0-0x104-
|
|
|
BILZ TYPE TAP COLLET 393.03-SES2 D070X055 1X5.5 TAPPING MACHINE SHOP TOOLING
YOU ARE PURCHASING THE PICTURED TAP COLLET. IT IS USED. LABELING ON THE TOOL READS: 393.03-SES2 D070X055 1X5.5 PLEASE EMAIL ME ANY QUESTIONS YOU HAVE. I WILL COMBINE SHIPPING WHENEVER POSSIBLE. I WILL SHIP WORLDWIDE. THANK YOU! LL
|
|
|
BILZ TAP COLLET WE 31 25 TAPPING MILL MADE IN GERMANY MACHINE SHOP TOOLING TOOLS
YOU ARE PURCHASING THE PICTURED BILZ TAP COLLET. IT IS USED. LABELING ON THE TOOL READS: WE 31 25 PLEASE EMAIL ME ANY QUESTIONS YOU HAVE. I WILL COMBINE SHIPPING WHENEVER POSSIBLE. I WILL SHIP WORLDWIDE. THANK YOU! LL MD5992213
|
|
|
RARE - Cornelius Soda Fountain Dispenser Machine - Beer Keg Tap - 1950's
RARE- Cornelius Soda Fountain Dispenser Machine- Beer Keg Tap 1950's GREAT VINTAGE CONDITION Stamped"CORNELIUS" and"Minneapolis" on top right behind handle Shows wear as would be expected for it's age I've included lot's of photos from all angles- please review and ask questions before bidding Full payment is due within 5 days of end of auction PayPal payment required. Thank you for looking and bidding
|
|
|
1/16-27 NPT 1/16" x 27 Pipe Tap - Machine Shop Quality High Speed Steel HSS
1/16"27 NPT tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
1/4-20 STI Tap Helicoil Heli-Coil Coil Insert High Speed Steel Machine Quality
1/4-20 STI Heli-Coil type tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
Jagermeister On Tap Machine Jager Bottle Liquor Cold Shot Dispenser Model J99
Jagermeister On Tap Machine Jager Bottle Liquor Cold Shot Dispenser Model J99. Good working condition. On each side one of the little plastic things are broken. They are easily replaceable. It will be shipped UPS Ground. Or if you're local you can pick it up.
|
|
|
HAAS DT-1 DRILL TAP CENTER MACHINE
TRAVELS S.A.E. METRIC X Axis, 20" 508 mm, Y Axis, 16" 406 mm, Z Axis, 15.5" 394 mm, TABLE S.A.E. METRIC Length, 26" 660 mm, Width, 15" 381 mm, T-Slot Width, 5/8" 16 mm, T-Slot Center Distance, 4.92" 125.0 mm, Number of Std T-Slots, 3 3, Max Weight on Table(evenly distributed) 250 lb 113 kg, SPINDLE S.A.E. METRIC Max Rating, 15 hp 11.2 kW, Max Speed, 12000 rpm 13000 rpm, Max Torque, 46 ft-lb@ 1700 rpm 62 Nm@ 1700 rpm, Drive System, Inline Direct Drive Inline Direct Drive, Taper, BT/30 BT/30, Bearing Lubrication, Air/Oil Air/Oil, Cooling, Air Air, TAPPING S.A.E. METRIC Max Tapping Speed, 5000 rpm 5000 rpm, Max Tap Size(aluminum) 1/2 x 13 M12 x 1.75, FEEDRATES S.A.E. METRIC Rapids on X, 2400 in/min 61.0 m/min, Rapids on Y, 2400 in/min 61.0 m/min, Rapids on Z, 2400 in/min 61.0 m/min, Max Cutting, 1200 in/min ... more30.5 m/min, AXIS MOTORS S.A.E. METRIC Max Thrust X, 2550 lb 11343 N, Max Thrust Y, 2550 lb 11343 N, Max Thrust Z, 4200 lb 18683 N, TOOL CHANGER S.A.E. METRIC Type, SMTC SMTC, Capacity, 20+1 20+1, Max Tool Diameter, 2.0" 51 mm, Max Tool Diameter(adjacent empty) 2.0" 51 mm, Max Tool Length, 7.0" 178 mm, Chip-to-Chip(avg) 1.8 sec 1.8 sec, GENERAL S.A.E. METRIC Air Required, 4 scfm. 100 psi 113 L/min. 6.9 bar, Coolant Capacity, 45 gal 170 L, COMES EQUIPPED WITH DUAL AUGERS THE FOLLOWING BT-30 TOOL HOLDERS WITH PULL STUDS ARE INCLUDED 1/8" 2qty 3/16" 2qty 1/4" 2qty 3/8" 2qty 1/2" 2qty ER16 Collet Holder 3qty ER32 Collet Holder 4qty 22mm SECO Shell Mill Holder 1qty THE FOLLOWING ARE NOT INCLUDED NO Collets NO Tools NO Shell Mill NO Vices NO Cutting Tools
|
|
|
3 1/2 10 HSS H8 TAP 8 FLUTE MACHINE SHOP TOOLING MACHINIST TOOLMAKER TOOLS
YOU ARE PURCHASING THE PICTURED TAP. ITEM IS USED. THERE ARE NO CHIPPED OR BROKEN TEETH. LABELING ON THE TAP READS: WIDELL 3 1/2- 10 HSS H8 3449 I SHIP 95% OF MY LISTINGS SAME DAY AS PAID FOR IF PAID BY 3:00 E.S.T. OHIO) IF YOU MUST HAVE SAME DAY SHIPPING PLEASE CALL ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. OR EMAIL THRU EBAY MESSAGING. PLEASE SEE MY OTHER LISTING FOR MORE GREAT VALUES. I HAVE MANY TAPS(METRIC& STANDARD) IN STOCK UP TO 3" IN DIAMETER. SO IF THIS IS NOT WHAT YOUR LOOKING FOR PLEASE CONTACT ME. ALSO HAVE EXTENSION TAPS AND THREAD GAGES. I WILL COMBINE SHIPPING. I WILL SHIP WORLDWIDE. THANK YOU! LL. SHELF 13 TRAY 2 dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14512cf73e1-0x105-
|
|
|
Drildex Tap Drills and Machine Screws Collection (Drildex to go)
Drildex to go. Drildex Tap Drills for Pipe Taps. And American Standard Machine Screws. Some pieces are missing in the front. See the pictures for the missing peices. All pieces are in a metal vintage looking box. Thanks for looking! lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-14523eeb9f9-0x104-
|
|
|
Brother #TC-227 CNC Drill & Tap Machine Center - 14 Holders
Brother CNC Drill Tap Machine Center Model# TC-227- Great Condition. Mfg: 1991. Specifications: Table Travels: X 16.5. Y 11.8. Z 9.8 Table Size. 23.6 x 11.8 Spindle Taper. 30 Tool Changer. 10 Spindle Speeds. 6.000 rpm Rapid Feed. 787 spm Tool to Tool. 1.5 seconds Main Motor. 5.5 hp Machine Weight. 4.500 lbs. Machine Equipped with: Brother CNC 520 Control Coolant pump and tank 14 holders HIMES MACHINERY PHONE- 888-803-2496- www.HimesMachinery.com FINANCING AVAILABLE- CLICK LINK/ FREE INSTANT QUOTE http:www.crestcapital.com/himesmachinery* WE ARE FULL SERVICE& NEVER CHARGE FOR LOADING* WE ARRANGE FREIGHT TO ANYWHERE IN THE USA. MEXICO& CANADA*
|
|
|
Jagermeister Tap Machine Model JEMUS 2 Bottle Refrigerated Beverage Dispenser
Jagermeister 3 Bottle Refrigerated Tap Machine. Product Details The Jägermeister 3 Bottle Tap Machine is perfect for serving up ice cold shots at 0°F. This machine is great for bar settings or at-home entertaining. Compact DesignChills Jägermeister to below freezing temperatures. Graphics and logos backlit with LED technology. Low indicator light. Dimensions: 11" W x 15" D x 26" H(when loaded with 1 liter bottles) Normal operation uses less than 2 standard 100 Watt light bulbs You are bidding on a Jagermeister Tap Machine. It is used but in excellent working condition. Please only serious bidders. I accept Paypal within two days of winning bid and ship Monday thru Friday within two days of received payment. Thank you.
|
|
|
JAGERMEISTER J99 JAGER 3 LIQUOR BOTTLE, BAR, COLD SHOT, TAP MACHINE w/ LIGHTS
UP FOR AUCTION: JAGERMEISTER J99 3 BOTTLE TAP MACHINE GENERAL CONDITION: PRE-OWNED WORKING CONDITION: GREAT COSMETIC CONDITION: GREAT BRAND NAME: JAGERMEISTER MODEL# J99 ITEM SPECIFICS: CONTAINS SOME LIGHT SCRATCHES. CONTAINS MODERATE SIGNS OF WEAR FROM PREVIOUS USE. BUT NOTHING AFFECTS THE PERFORMANCE OF THE ITEM. THIS HAS A DISPENSE BUTTON. HAS A CHILLING/ COOLER DISPENSE OPTION. HOLDS 3 LIQUOR BOTTLES. MANUFACTURED IN AUG/2005. WEIGHT IS APPROX. 50 LBS. HAS ROPE LIGHTS FOR DISPLAY. ANY DEFECTS OR OBVIOUS DAMAGE: THE PLASTIC CAPS THAT COVER THE BOTTLE DISPENSE HOLES ARE BEGINNING TO BREAK OFF(REFER TO PICTURES) THIS AUCTION INCLUDES: JAGERMEISTER J99 3 BOTTLE TAP MACHINE*PLEASE REFER TO THE ABOVE PHOTOS FOR A DETAILED LOOK AT THE ITEM! EVERYTHING COMES AS SHOWN IN PHOTOS! IF YOU ARE THE WINNER. PLEASE CONTACT US TO ASSURE THE DESCRIPTION ... moreOF THE ITEM MEETS OUR AUCTION, AND ALSO IN THE HOPES TO CREATE A PLEASANT CUSTOMER AND SELLER RELATIONSHIP!
|
|
|
Square Tap Numeric Pneumatic Articulated Arm Tapping Machine Model 62 Lista
Square Tap Numeric Pneumatic Articulated Arm Tapping Machine Model 62 Working Station- SOLD AS SEEN IN PICTURES! Model 62 S/N. 193 Multi angle vertical/ Horizontal tapping. Attached to a 3.5" steel Milwaukee Slide& Spindle wheeled working table( 48" L x 30" D x 32" H) Comes with a tapmatic collect chuck adapter# 1 selection of Jaws for Tap Square. Model DL051B-10-PS S/N. 0850A88 RPM: 1000 ubidonline Item Number: 0414-06 A2 You are bidding on(1) Square Tap Articulated arm working Station. We make every effort to communicate all of the details to make an informed decision. However, verification and perceived value may vary. If a condition or features are provided, they are ONLY done so as a COURTESY. You as a buyer are expected to know what you are purchasing and understand that all items are sold“as is, where is, with ... moreall faults” The more informed you are, the better your purchase decision. Since your needs are unique to you, your evaluations will be different from others. This item was purchased for resale and was NOT used by seller. This item can be previewed and inspected by appointment only at our location in Chatsworth. CA. If you have any questions, please call us at(818) 734-9043. Please ask ALL questions prior to bidding! Since I am not a dealer. This units is sold"As-Is" with"No Warranties" and"All Sales are Final" You may pay by personal/ company check. Cashier's check, or Pay Pal. Note: Merchandise will be held until funds clear. Buyer is responsible for ALL shipping& handling fees. Shipping Information: Pick-up location: Chatsworth. CA 91311 CUSTOMER PICK-UP PREFERRED Insurance Required: Varies on the selling price. Buyer releases Anthony Bertolino and/or Bertolino's. Bertolino Sales from any liabilities from this unit. All liabilities will be the responsibility of the buyer. Any problem with the item once received; please. Contact us first BEFORE leave your feedback. Merchandise must be paid for within 3 days. Please. Contact us for int
|
|
|
SNAP TAP CEG 100 5-160 CNC MACHINE TOOL TOOLING CUTTER CARBIDE INSERT #179
ARPI MACHINE SALES. OUR PHYSICAL ADDRESS: 12165 BRANFORD STREET SUITE F SUN VALLEY CA 91352 OFFICE: 818 890-7625 VERY IMPORTANT! PLEASE READ. AFTER PURCHASING THIS OR ANY OTHER ITEM FROM US. PLEASE LEAVE POSITIVE FEEDBACK AND GIVE US A 5 STAR RATING IN ALL 4 CATEGORIES. IF YOU HAVE ANY PROBLEMS WITH YOUR ORDER, PLEASE CALL US AT THE OFFICE IMMEDIATELY(BEFORE LEAVING FEEDBACK) AND WE WILL TRY TO RESOLVE ANY ISSUES YOU HAVE. FURTHERMORE, WE MARK ALL OF OUR ITEMS TO PREVENT ANY DISHONEST EBAYER FROM TRYING TO EXCHANGE OUR ITEM WITH THEIR OLD/NON WORKING ONE AND THEN ATTEMPT TO SEND BACK TO US BY CLAIMING IT AS NON WORKING IN ORDER TO RECEIVE A REFUND. THIS HAS HAPPENED SOMETIMES AND WE HAVE TAKEN SERIOUS ACTION AGAINST THESE FRAUDULENT PRACTICES IN THE PAST. THIS TYPE OF BEHAVIOR IS UNACCEPTABLE AND ACTION WILL BE TAKEN AGAINST THESE BUYERS ... moreTHRU EBAY POLICIES BY REPORTING THEM TO EBAY IMMEDIATELY. HERE AT ARPI MACHINE SALES, WE REALIZE MOST PEOPLE ARE HONEST AND DO NOT PRACTICE TECHNIQUES MENTIONED ABOVE. BY THE SAME TOKEN WE ARE COMMITTED 100% TO PROVIDE SUPERIOR CUSTOMER SERVICE TO ALL WE ARE PLEASED TO PRESENT THE FOLLOWING FOR YOUR CONSIDERATION WE WILL SEPARATE IF YOU SEE SOMETHING YOU WOULD LIKE TO BUY TO SEE ALL PARTS FROM THIS MACHINE PLEASE PLEASE CALL IF YOU NEED OTHER PARTS FOR IT. TOOL HOLDERS SHELF BK~ 4/4/14 CALIFORNIA BUYERS TO PAY 9% SALES TAX SHIPPING& HANDLING: INTERNATIONAL AND EXPEDITED SHIPPING AVAILABLE PAYMENT INSTRUCTION: Payment can be made with paypal. Business or personal check or wire transfer. All payments must be received by Arpi Machine Sales within 7 days. Payments must be sent to ARPI MACHINE SALES at 12165 Branford Street. Unit A, Sun Valley, California 91352. For faster release of the equipment, payments must be made by next business day in order for us to process and verify the funds. Before sending the payment please contact us by phone 818 298-9685 or by e-mail. TERMS AND CONDITIONS: If payment is not received within 7 days. ARPI MACHINE SALES has the right to re-list the i
|
|
|
M10X1.5 6H 3-Flute CNC Bottom Tap Hy-Pro by OSG Mill, Lathe, Machine shop!!!!
Up for sale! This is for one(1) OSG HY-PRO M10-1.5 6H 3-flute CNC Bottom tap. I'm cleaning out my garage and tool boxes of tools. I realized that I have quite a few of the same things. These are gently used HIGH quality taps. See pictures for the condition.I've tried to take very accurate pictures. What you see in the pictures is what you'll be getting. Feel free to check out my other listings. I just might have what you've been looking for! Please refer to the pictures and item description. If you have any questions feel free to ask before bidding/buying. Shipping to US lower 48 only unless agreed on other terms prior to purchase. Thanks for looking.
|
|
|
Jagermeister JAMUS TAP machine - REDUCED 30% SEND OFFER!!!!!
WELCOME AND THANK YOU FOR VISITING ITEM DESCRIPTION: This auction is for used Jagermeister JAMUS TAP machine. In"as is" condition. Untested, without any warranty, no return. All sales are final. As any other item we sell. SALE DIRECTIONS: 1. Everything we sell is offered for sale in"as is" condition. Untested, without any warranty. 2. All sales are final: no return or refund of any kind. 3. We do not accept PayPal. We can accept PayPal's credit debit cards trough our merchant account. But not direct PayPal payment. 4. Accepted: credit cards(Visa. Master Card, Discover) Please, give us a call at 513-907-9434 with all questions related to our accepted payment methods or contact us trough e-bay with any questions. 5. We will ship anywhere in the USA or to any world location. 6. Shipping costs are your expense. 7. Over-sized ... moreand heavy items are shipped by freight. I can provide freight quote upon request. Please. Do not forget to e-mail me your zip code for quotation. 8. We will box and paletize for free. WE DO NOT CHARGE FOR PACKING. HANDLING OR PALETIZING. 9. Shipping insurance is not mandatory but it is recommended- it is your expense- we will do our best to protect items against shipping damages. But we will not be responsible for any shipping damages. In case of shipping damage, we can help you file a shipping damage claim with shipper- upon your request. We will not accept shipping damaged item returns. 10. All items listed as used will need additional cleaning. They may missing accessories or may not be complete. In-person inspection is encouraged prior to placing a bid/submitting offer or buying any of our items. 11. All items offered for sale locally- I reserve right to stop this and any of my auctions at any time prior to auction end if item is sold locally. Please. Do not wait till the last moment to place you bids- local cash offer or sale may stop this or any of our auctions. 12. Offers: We appreciate your offers and will consider each-one of them with upermost attention and respe
|
|
|
NPT Co 1-1/2" -6 NC Rougher Thread Tap 1st Pass for Screw Machine 4-Flute
Up for sale here is a NPT Co 1-1/2" 6 NC Rougher Thread Tap 1st Pass for Screw Machine 4-Flute. 3" Long flutes. 6-1/2" OAL. Used in good condition. Feel free to ask any questions. SCT3575
|
|
|
Widell 3 1/2-12 HS H5 15321 Bottoming Pipe Tap Plumbing Machine Die Mill Boiler
Up for your consideration is a Widell 3 1/2-12 HS H5 15321 bottoming pipe tap. I am not sure the extent of its use. It may not have been used at all. It is in very good condition, with just some minor scratches and residue. Please ask any questions you might have. Make sure to look at the other tools that I currently have listed.
|
|
|
M 48 X 2 D7 HSS METRIC TAP 6 FLUTE 2.2.0 M48.0 USA MADE MACHINE SHOP TAP TOOL
HELLO- YOU ARE PURCHASING THE PICTURED METRIC TAP. IT IS USED. IT IS SHARP. NO CHIPPED OR BROKEN TEETH. IT IS LABELED: HW CO USA M48 X 2 HS 3052 D- 7 IF YOU HAVE ANY QUESTIONS. PLEASE SEND ME A MESSAGE OR GIVE ME A CALL AT 937-475-3068. I WILL COMBINE SHIPPING IF POSSIBLE. I WILL SHIP WORLDWIDE. THANK YOU!
|
|
|
M 33 X 2 METRIC TAP 4 FLUTE 2.0 2. MACHINE SHOP METRIC TAP TOOLING TOOL M33 2
YOU ARE PURCHASING THE PICTURED METRIC TAP. ITEM IS USED. IT IS VERY SHARP. IT WILL CUT FRESH METAL OR CLEAN DAMAGED OR DIRTY THREADS NO PROBLEM. LABELING ON THE TAP READS: M 33 X 2 IT IS A 4 FLUTE TAP WITH ABOUT A 5/8" LONG LEAD. SHIP 95% OF MY LISTINGS SAME DAY AS PAID FOR IF PAID BY 3:00 E.S.T. OHIO) IF YOU MUST HAVE SAME DAY SHIPPING PLEASE CALL ME AT 937-475-3068 TO BE SURE I SEE YOUR PAYMENT. OR EMAIL THRU EBAY MESSAGING. PLEASE SEE MY OTHER LISTING FOR MORE GREAT VALUES. I HAVE MANY TAPS(METRIC& STANDARD) IN STOCK. IF THIS ISN'T WHAT YOU'RE LOOKING FOR PLEASE CONTACT ME. ALSO HAVE EXTENSION TAPS AND THREAD GAGES. I WILL COMBINE SHIPPING ON SMALLER ORDERS. I WILL SHIP WORLDWIDE. THANK YOU! J TAP CABINET.
|
|
|
3 Bottle Jager Tap Machine Model JEMUS: Jagermeister Shot Chiller Alcohol
This is very lightly used Jager machine. Only used a couple of times. Comes with everything seen in the pictures! Tap handle. Drip trap and bottle caps. Any questions let me know! Due to how heavy this is no returns are accepted. Thanks and happy bidding!
|
|
|
3/4-10 NC 3/4" x 10 TPI NC Tap - Machine Shop Quality High Speed Steel HSS
3/4"10 tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
3/4-10 NC 3/4" x 10 TPI Bottom Bottoming Tap - Machine Shop High Speed Steel HSS
3/4-10 NC bottom tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
3/4-16 NF 3/4" x 16 TPI Bottom Bottoming Tap - Machine Shop High Speed Steel HSS
3/4-16 NF bottom tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
3/4-16 NF 3/4" x 16 TPI Tap - Machine Shop Quality High Speed Steel HSS
3/4"16 NF tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
7/8-14 NC 7/8" x 14 TPI Tap - Machine Shop Quality High Speed Steel HSS
7/8"14 NC tap bottom manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
1-8 NC 1" x 8 tpi Bottom Bottoming NC Tap - Machine Shop High Speed Steel HSS
1"8 NC Bottoming tap manufactured using the highest quality US made machine shop grade high speed steel(HSS) ~ ~
|
|
|
1-8 NC 1" x 8 tpi NC Tap - Machine shop quality High Speed Steel HSS
1"8 NC tap manufactured using the highest quality US made machine shop grade high speed steel(HSS) ~ ~
|
|
|
1 11-1/2 NPT 1" x 11-1/2 TPI Pipe Tap Machine Shop Quality High Speed Steel HSS
1 11-1/2 NPT 1" x 11-1/2 TPI tap manufactured using the highest quality machine shop grade high speed steel. ~ ~
|
|
|
1/8-27 NPS 1/8" x 27 Pipe Tap - Machine Shop Quality High Speed Steel HSS
1/8"27 NPS tap manufactured using the highest quality machine shop grade high speed steel. Please note that this is an NPS(straight) pipe tap rather than an NPT(taper) Please see my other listing for the NPT version. ~ ~
|
|
|
1/4-18 NPS 1/4" x 18 Pipe Tap - Machine Shop Quality High Speed Steel HSS
1/4-18 1/4" x 18 NPS tap manufactured using the highest quality machine shop grade high speed steel. Please note that this is an NPS(straight) pipe tap rather than an NPT(taper) Please see my other listing for the NPT version. ~ ~
|
|
|
5/16 24 NF VEC HAND TAP MACHINE SHOP TOOLING MACHINIST TOOL TAPPING THREADING
YOU ARE PURCHASING THE PICTURED TAP. THIS ITEM IS USED. Markings: MORSE USA 5/16 24 NF HS VEC International shipping available! Many more tools for sale! DRAWER 18
|
|
|
Jagermeister Tap Machine model J99 with lots of accessories -No Reserve
This is a very nice Jagermeister Machine model J99. I've had this for quite a number of years but only used it on a couple dozen occasions. I've kept it very clean and in like new condition. Makes Jager super cold and extra tasty! Holds up to 3 liter bottles on the top and can hold about 750ml inside the machine. Cools Jager to sub-zero temperatures. Lots of accessories included! The original drip tray with orange lettering A second drip tray with white lettering A total of 6 bottle stoppers(one never opened/used) Original manual and paperwork w/ included maintenance tool 3 rare Jagermeister collectors tins(Fits nicely over 750ml bottles on top of machine or just as placeholders on top of the machine to make it look full) Collectors tins have some blemishes and scratches. Which can kind of been seen in the photos. 2 packages of disposable ... moreJagermeister shot glasses. One never opened. The other with only a few missing.
|
|
|
Scully Jones & Co Machine Taper#79 SPLIT SLEEVE 7/8" HAND TAP MACHINIST
UP FOR YOUR CONSIDERATION IS: Scully Jones& Co Machine Taper#79 SPLIT SLEEVE 7/8" HAND TAP MACHINIST. FREE SHIPPING" PURCHASED AT AN ESTATE SALE. GOOD SHAPE. NO ID ENGRAVING. SOLD AS IS" REVIEW PICTURES FOR DETAILS. PLEASE TAKE A MOMENT TO BROWSE MY E-BAY STORE FOR ADDITIONAL UNIQUE ITEMS. Powered by The free listing tool. List your items fast and easy and manage your active items. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-1456f7996a2-0x116-
|
|
|
Fast Tap 800 Flexible Arm Pneumatic Tapping Machine
Fast Tap Model 800 Flexible Arm Pneumatic Tapping Machine Tapping Steel: 3/8. Capacity Alum. 1/2, No Load Speed RPM: 800, Air Pressure PSI: 90. CFM: 26, Torque FT.LB: 14.5, Reach Inches: 48 This is a Used Machine but in very good condition; I sold my manufacturing business and no longer have need for this but it was very useful to me and saved a lot of time. A very quick& economical method of tapping. High quality threads; Blind and through holes; No indexing or moving of work piece; Tap breakage is drastically reduced; Can also be used for reaming. Chamfering, spot facing, helicoil insertion and countersinking; Can be used by unskilled labor; Suits components from very small to very large. A Complete Tapping Machine- Parallel arm for vertical tapping with 48" reach standard- Air preparation unit with mist lubricator. Water trap, ... morepressure gauge& regulator- Air-driven reversible tapping motor with quick change tapholder(Bilz type) Stationary bench mount with main shaft Has 6 Torque limiting tap chucks(Bilz type) 6. 8, 10- M4.5, 1/4" M6, 5/16" M7-M8, 3/8" M10 Quick change drill chuck 3/8 capacity FREE SHIPPING Our policy is FREE SHIPPING for smaller packages or"local pick up" as indicated for larger. Heavier items. We use PayPal, allowing you to buy an item and pay within 3 days of your purchase! All orders will be processed within 24 hours of received payment. We primarily send Shipments by USPS, however we also may use UPS providing it would be more cost-effective. We will post tracking numbers so you can follow your item as it comes to you. Please contact us before making any returns. This way we can arrange shipping or if it was a“local pick-up” to make arrangements. 30 Day Returns We allow items that do not meet or exceed your expectations to be returned within 30 days of receiving your item. We desire to give you as much information as is available for each item so that you will know what you are getting. You deserve to know what you are buying. The exact condition of tha
|
|
|
Special machine shop reamer tap combination 13/16-20 x 5/16 ream x 8 1/4 long
14C304 up for sale is a speciality tool made for a special application could be modified to use as just a tap or keep as a tap reamer? 13/16-20 tap part the reamer end is 0.312 5/16 diameter. The taper part is MT2 morse taper# 2 the total length is 8 1/4 long, weird old tool, might be great for a machine shop display or collection or put it back to work? Buyer to pay calculated shipping and packing to your locations. See our store for more items like this click below, we will work with you to save on shipping for multiple item purchases, Thank you RWK Check out my! Di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-145716c6426-0x108-
|
|
|
5/8-11 NC 5/8" x 11 TPI Bottom Bottoming Tap - Machine Shop High Speed Steel HSS
5/8-11 NC bottom tap manufactured using the highest quality machine shop grade high speed steel(HSS) ~ ~
|
|
|
Jagermeister Jager Dispenser J99 Tap Machine Bar Shot 3 Bottle Cooler Holder EUC
Jagermeister Bar Dispenser Description: Model: J99 On Tap Chilling Dispenser Jagermeister Tap Machine Cools& dispenses liquids 3 Bottle Capacity 1 Bottle Adapter Bottle Stand Top rope lights(separate on/off switch) Catch Tray Perfect for Home Bar. Game Room or Man Cave! Size: all measurements approximate) 22" L x 13" W x 24" H(height includes bottle stand) Condition: Excellent gently used condition(chiller. Pump& lights all working) Lines& pump have been flushed with fresh water 1 bottle adapter 1 rope light kit 1 catch tray Please see pictures for details of the EXCELLENT gently used condition. ~I am happy to answer any questions. Please look at the photos closely for specifics on condition and let me know if you need additional information. I try to provide honest. Detailed photos& descriptions to ensure that ... moreyou are happy with your purchase. Shipping: The shipping cost shown has been calculated by ebay based on the item's packaged weight and your location.
|
|
|
3 Bottle Jager Tap Machine Model JEMUS: Jagermeister Shot Chiller EUC NR
Excellent used condition! Used for less than four months. It's being sold because it wasn't utilized enough and was taking up too much space behind the bar! There is nothing wrong with this machine. Works great. Jäger comes out ice cold from the front tap. Stores three bottles on top plus what the machine holds. Ships with delivery confirmation and insurance. Posted with
|
|
|
(ar 30) TDW Williamson WMSON T-101 Drilling Machine Hot Tap Drill W/Case
ar 30) TDW Williamson WMSON T-101 Drilling Machine Hot Tap Drill W/Case This Drilling Machine appears to be in good used condition. We were able to turn the unit and assume it is working properly. There is a hand ratchet along with other head bits etc. But we are selling this item for just the T-101. We do have a 14 day"No questions asked" return policy. Thank you for visiting our eBay store! If you have any questions. Just send us an email through eBay messaging. We strive to answer all questions as soon as possible. NOTE ON SHIPPING: Shipping is free for all U.S. customers living in the lower 48 contiguous states. All items will be shipped within 1 business day of completed payment. If you live in Alaska. Hawaii, or Puerto Rico: Your item will be shipped via USPS Parcel Select and can take up to 9 days to arrive. If you would ... morelike the item shipped USPS Priority Mail. Please send us an email through eBay for additional shipping charges. NOTE FOR INTERNATIONAL CUSTOMERS: Please send us an email through eBay for a quote on shipping. All customs fees. Duties, import taxes, and related charges are solely your responsibility to pay. We have no ability to estimate those cost so please contact your local post office prior to bidding to understand your financial responsibilities upon arrival. The number code in parenthesis at the beginning of the title is an internal company inventory code. It is in no way affiliated with the actual title. Please do not hesitate to contact us with any questions or comments. Prompt. Friendly, and accurate service is our main priority. 62 48x7x9
|
|
|
ELECTRO ARC ELECTROARC 2DBQT TAP METAL DISINTEGRATOR MACHINE 1 PHASE
WarnerSales Warner See all my listings: WarnerSales ELECTRO ARC ELECTROARC 2DBQT TAP METAL DISINTEGRATOR MACHINE 1 PHASE Offered is a USED Electro Arc Metal Disintegrator Machine. Model: 2DBQT. Description: 1 phase. 460 volt. 13 amps. 60 Hz. Kva: 10. Working surface of table 26" L-R x 18-1/4" F-B Maximum distance from work surface to bottom of disintegrator head 36" Work height from floor 72" 2) Crossarms: Diameter 1-1/2" Length 34" Rotation 360 degrees in two planes. Automatic adjustable feed. Approximate Cutting Speeds: Average Removal Time 1/4" Tap: 1 minute 3/8" Tap: 2 minutes 1/2" Tap: 2 minutes 3/4" Tap: 4 minutes 1/8" Drill: 1 minute 1/4" Drill: 2-1/2 minutes No collets in the chuck. Good. Used working condition. This was taken to a certified welding ... moreservice center where it was checked for function, and is working 100% FREE SHIPPING TO THE LOWER 48 STATES Feel free to contact us with any questions you may have by scrolling to the bottom of the page and using the"ask a question" link. Please include the eBay item number in all of your communications. We will respond to you as soon as we can. Our office is not staffed to answer emails evenings and weekends. And your patience is appreciated. Payment: We accept PayPal only. Payment must be made within 5 days of purchase commitment. If payment is not received within five days. An unpaid item case will be filed with eBay in order to recover our listing fees. Sales Tax: We are required to charge 6% sales tax for items sold to Iowa residents. LTL Freight Shipping: We provide free LTL freight shipping within the U.S. to the lower 48 states to a business address with a dock or forklift. Or for pickup at the terminal nearest you. We ship ONLY to the confirmed address provided with Payment. Before you pay. Please check your PayPal address for accuracy. We can provide shipping with lift gate service to a residential or business address for an additional
|
|
|
CASA NOBLE TEQUILA CHILL SHOT CHILLER TAP MACHINE ALCOHOL DISPENSER
CASA NOBLE TEQUILA CHILL SHOT DISPENSER Rare Find! COMMERCIAL GRADE(BAR) EXCELLENT CONDITION(just completely serviced) The Casa Noble Chill Shot 2 Dispenser unit is a complete self-contained liquor dispenser which when supplied with liquor will dispense four different brands at a temperature colder than ice. The unit consists of a cabinet. Refrigeration system, modular pumps, and LED lights for merchandising. The Casa Noble Chill Shot Dispenser unit has been designed to fit in the smallest possible space while dispensing a maximum amount of chilled liquor. great for any bottled liquor you want cold Commercial Grade Condition:Excellent- Pre-Owned Measures Approx: Height: 23.5" Width: 8.5" Depth: 19" Volts Ac: 120 Amp: 4.5 Model: SLIM SHOT-2 SERIAL: 55702* BID WITH CONFIDENCE! Please See Photos For Details. Quality& Condition ... moreTo Form Your Own Opinion and Value Before Bidding. Email Us If You Have Any Questions. 14-day Money Back Return Policy- Please read policy details before bidding! As with all our items. This item comes with a 14 day money back guarantee, is eligible for shipping discounts when combined with other items. And is shipped the next business day after payment is received! Unlike a lot of other sellers. We believe in leaving feedback for our customers after payment is cleared rather than waiting until after they leave us feedback! It is our highest goal and best intention to provide exemplary customer service. Open and honest two-way communication is the key. If you feel that you cannot leave 5 star feedback for any reason. Please contact us so we may resolve the situation prior to feedback being left. Shipping(U.S. We ship all packages via US Postal Service or UPS at posted online rates unless otherwise noted. If you have any questions about the cost of shipping please contact us prior to bidding. We do charge for shipping materials. Shipping time is based on the US postal service or UPS shi
|
|
|
Burgmaster Turret drill and tap machine 6 spindle with 2 tapping heads
Burgmaster 6 station turret drilling and tapping machine. Comes with 2 tapmatic heads. It is in good working condition and currently under power. Come see it run.
|
|
|
36 piece Tap Machine Lathe Metal Tool Lot Besly,Regal,Goliath - New and Used
This auction is for a total of 36 Tap Tools. The lot is mixed with used taps and new taps. There is a variety of sizes and brands in the lot. Including the brands Besly, Regal, and Goliath. The sizes include: 2 of M6 x 1 6 of M10 x 1.5 9 of 5/16- 18 NC GH3 R10 2 of M8 x 1.25 1/2- 13 NG GH3 HS 4T 2 new 5/8- 11 GH3 NC HS LS1 USA plus others The lot is being sold as is. Please email with any questions or concerns. International shipping is extra. Please contact for price. Thank you for looking and have a good day.
|
|
|
General Mfg. Number Size Drill Gage, Machine Screw Tap & Wire Gage, No.15
General Mfg. Number Size Drill Gage. Machine Screw Tap& Wire Gage, No.15 Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge This is a used General Mfg. Number Size Drill Gage. Machine Screw Tap& Wire Gage, No.15. Light surface rust(or patina) in a few spots. I see no owner markings. Please be sure to see the photos as they are sometimes better at describing the item and condition than I am. The photos are of the actual item. Check my feedback and bid with confidence. I STRIVE FOR 5 STAR FEEDBACK. So if you have a question or concern please contact me! Shipping will be via USPS first class mail. USPS Priority mail or FedEx home delivery. International 1st Class& Priority Mail USPS. I mark all customs documents with the FULL payment price. No exceptions, no gifts, you will pay the customs fees as ... moreper the rules. I accept Paypal only. Payment is due in 3 days from end of auction. USPS insurance available upon request and at additional USPS cost. Please note that I will combine shipping purchases to save money on shipping costs if at all possible. Be sure to check out my store! I ship the next business day after receipt of payment on all items except very large items which might take an extra day at most. You will receive an email with a tracking number when I have generated your shipping label. Thanks. Harley. Paypal only. Due in 3 days. inkfrog terapeak. InkFrog Analytics.
|
|
|
1" 15/16 16 NS MACHINE TAP MACHINIST TOOLING HSS TOOLS THREADING TAPPING
You are purchasing the pictured TAP. This item is USED. BUT IN OKAY CONDITION. SOLD AS-IS. SEE PICTURES FOR WEAR AND DAMAGE. It is labeled: PRATT& WHITNEY HARTFORD CONN. U.S.A. 1 15/16- 16 NS G P8 H.S. 31 IF YOU HAVE ANY QUESTIONS. DON'T HESITATE TO MESSAGE ME THROUGH EBAY. I DON'T PROFIT ON SHIPPING LIKE MOST EVERYONE ELSE ON EBAY! I WILL COMBINE SHIPPING I SHIP WORLDWIDE THANK YOU! BIG TAPS
|
|
|
BURGMASTER B-3166 6 STATION AUTO INDEXING TURRET DRILL & TAP MACHINE
BURGMASTER B-3166 6 STATION AUTO INDEXING TURRET DRILL& TAP MACHINE Click Images to Enlarge BURGMASTER 6 STATION AUTO INDEXING TURRET DRILL& TAP MACHINE THIS IS A NICE LITTLE BURGMASTER. NEEDS A LITTLE WORK. BOTTOM SPINDLE DRIVE SHAFT IS BROKEN NEAR TIP. MISSING BACK COVER FOR MOTOR BELT INCLUDES CHUCK KEY TABLE: 12" x 8" THROAT: 5.5" MEASURES: 21" x 18" x 30" 1/3 HP 115 VOLTS 60 HZ 6.4 AMPS 1 PHASE 1.725 RPM CALL FOR WEIGHT COMES AS SHOWN IN PHOTOS SOLD AS IS ALL CHECKS MUST BE CLEARED BEFORE PICKING UP ITEM. WE CURRENTLY DO NOT OFFER FREE SHIPPING ON ANY OF OUR ITEMS. YOU ARE WELCOME TO PICK UP YOUR ITEMS AT NO CHARGE Condition: For parts or not working andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: See item description for Shipping Charges. Domestic Carriers are: Shipping ... moreCarrier Domestic I will ship to: Customer Service Policy: Freight charges on the invoice will be from FedEx Freight. If you do not wish to use FedEx Freight services please contact us at info@1machinerysales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) A $25.00 Loading fee will apply unless stated in the listing. A RESTOCKING FEE MAY APPLY A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Payment Policy: PayPal: Please contact us with any questions. 1MachinerySales.com Items that require a std 4'x4' pallet will have a $25.00 fee. Please email info@1machinerysales.com for pricing on items th
|
|
|
Jagermeister Jemus 3 Bottle Tap Machine Shot Chiller Beverage Cooler Dispenser
Jagermeister Jemus Tap Machine 3 Bottle Shot Chiller Beverage Cooler Dispenser 160 Watts 11.5 x 19 x 18 This is missing the drip tray- powers up and cools down_ Be sure to add me to your favorites list! Check out my other items! PLEASE READ THIS IMPORTANT SHIPPING INFORMATION SHIPPING CALCULATOR TO OBTAIN AN ACCURATE SHIPPING COST. PLEASE USE THE SHIPPING CALCULATOR AT THE TOP OF THE PAGE UNDER THE PAYMENT AND SHIPPING TAB! ALL SHIPPING TOTALS ALREADY INCLUDE THE HANDLING/CRATING FEE'S. PLEASE BE SURE TO FIGURE THE SHIPPING TO A RESIDENCE IF YOU ARE HAVING THE ITEM SHIPPED TO YOUR HOUSE; FIGURE THE SHIPPING WITHOUT A LOADING DOCK IF YOU HAVE NO WHERE FOR THE TRUCK TO BACK UP TO AND EASILY PULL THE FREIGHT OFF. IF YOU HAVE A DOCK. THEN FIGURE THE SHIPPING TO COMMERCIAL WITH LOADING DOCK. DELIVERIES TO A RESIDENCE AND DELIVERIES TO BUSINESS'S ... moreWITHOUT A LOADING DOCK INCUR ADDITIONAL CHARGES. BY FIGURING THE SHIPPING CALCULATOR CORRECTLY FROM THE START. YOU OBTAIN ACCURATE TOTALS, THUS ELIMINATING CONFUSION LATER ON. PREMIER FOOD EQUIPMENT IS NOT RESPONSIBLE FOR THESE ADDITIONAL CHARGES. IF YOU HAVE ANY QUESTIONS ABOUT THE SHIPPING. PLEASE CONTACT US AT 843-267-7627. Please feel free to call us with any questions! Premier Food Equipment 843-267-7627[1197] PLEASE READ THE TERMS BELOW CAREFULLY By bidding. You are agreeing to the terms of this auction. LISTING DISCLAIMER All Items are Sold"AS IS" NO Warranty. We have a showroom and warehouse in SC. Our items are for sale there as well. If an item sells out of the showroom. We will end the auction immediately. The only exception to this will be items purchased through BUY IT NOW. BIN purchases take precedence. We always try to list the item correctly. If you have questions or have discovered a mistake in our listing, please contact us before the auction ends. PAYMENT Payment is to be made within 5 days from End of Auction. Sout
|
|
|
P&N Machine round shank Tap UNF 1/2", TPI 20, intermediate
For sales is one pcs machine round shank tap. size: UNF 1/2" TPI 20, intermediate. with machine round shank 1/2" Brand: P&N Welcomed to ebay shop- toolingstation. Combined postage provided
|
|
|
Grey Goose Logo Vodka Dispenser Tap Machine Bar Shot 2 Bottle Cooler
So unique! Chill and dispense your Grey Goose in style! It weighs a ton though so consider the shipping. This is a very rare cooler/dispenser- only a few were made up and given as gifts from Sidney Frank. Posted with
|
|
|
Snow Tapping Machine Collet for Snow #1 Tapping Head - #10 Tap
Snow Tapping Machine Collet for Snow#1 Tapping Head- 10 Tap Fits Snow#1 Tapping Head#1 collets measure 1.1" OAL X 0.585" dia. at their greatest girth X 0.435" dia. body Pictures are representative of the actual item It is a stock photograph of one collet out of the group. The actual collet will be in similar or in better condition. Used but in good condition For more related info please check out the following links. We have more collets available. Don't see it in our store, message us.
|
|
 |