|
16' SS Conveyor Single Filer Table Top Bottle Conveyor
SS Conveyor Single Filer Infeed/ Discharge Section Nominal 16' in Length 5 Lanes of Single 7.5" Conveyor Last run as a product discharge from a bottle warmer Stainless Steel Construction Plastic Belting included Hydraulic Drive Motor(Can be replaced with electric drive) Wear Strips Side Rails Stainless Steel Legs included(removed for transport purposes) For More information, EMAIL CALL Kevin at(903) 355-1409
|
|
|
Consolidated SS Cap Bottle Elevator with Stainless Hopper and Cleated Conveyor
Consolidated SS Cap Bottle Elevator with Stainless Hopper and Cleated Conveyor Model#EPS8 PHARMACEUTICAL GRADE SS Construction including base platform 8" Cleated Belt 2" Cleats on 6" centers Last ran plastic bottles. Can run caps and a variety of other products or parts Stainless Hopper Dimensions: 42" L x 40" W x 42" Deep(V-Bottom) 80" Discharge height- adjustable Low product photo eye detection Lexan hinged cover on Hopper Lexan cover over cleated belt Casters for easy mobility Adjustable leg levelers Cleanout/ Inspection door Electrical specifications: 115 Volt/ 60 Hz/ 3 phase Just removed from a Pharmaceutical Operation Excellent Condition! For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*55267%60%3E-13e8e150aaf-0xf6-
|
|
|
Sentry SS Accumulation Table, 72" x 102" Long, Bottle Feed Table, Conveyor
Sentry SS Accumulation Table. 72" x 102"Long, Bottle Feed Table, Conveyor EXCELLENT CONDITION! Built to Pharmaceutical Specs Size 72" Wide x 102" Long Stainless Construction Intralox Plastic belting Dual drive system for either Bi-directional or flow thru use 42" Elevation. Adjustable legs and levelers Side rails mounted Guarding in place(3) Product detection photo eyes(2) Disconnects SS Electrical Panel Red indicator warning light Electrical 230/460 Volt/ 60 Hz/ 3Phase Just removed from a Pharmaceutical Operation EXCELLENT Condition! For More Information. EMAIL tesales@used-equipment.com Call Kevin at(903) 355-1409
|
|
|
SS Gap Transfer Bottle Conveyor, Bottomless Conveyor, up to 7.5" Containers
SS Gap Transfer Bottle Conveyor for up to 7.5" Containers MFG by BFT Max container size 7.5" dia Min container size 3/4" dia 45" elevation 84" Long Grippers Finger grippers for container transport Stainless frame construction SS legs SS Level adjusters SEW 1/2 Hp drive Electrical disconnect with operator controls Electrical 208/ 230/ 460 Volt/ 60 Hz/ 3 Phase Just removed from production! Very Nice Condition! For More information. EMail or CALL Kevin at(903) 355-1409
|
|
|
200 Feet of 3.25" Stainless Bottle Table Top Conveyor, SS Bottling Machine
200 Feet of 3.25" Stainless Bottling Table Top Conveyor Curves. Additional drives, diverts, transfers and single filers can be purchased for an additional price This package includes the following items: 200 feet of straight run SS conveyor 10' Long Sections Mfg New in 2008(4) Drive Transfer sections with gearbox drive assembly SS Construction Wear Strips Adjustable side rails SS legs with leg levelers Plastic Belting Electrical Specifications 230/460 Volt/ 60 Hz/ 3 Phase Conveyor is removed and is available for immediate shipment Curves. Additional drives, diverts, transfers and single filers can be purchased for an additional price Just removed from Production Excellent Condition! For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
10' SS Conveyor Single Filer Infeed / Discharge Section, Bottle Convey
10' SS Conveyor Single Filer Infeed/ Discharge Section Nominal 10' in Length 2 Lanes of 7.5" to 2 Lanes of 4.5" Belting Last run as a single filer Stainless Steel Construction Plastic Belting included Hydraulic Drive Motor(Can be replaced with electric drive) Wear Strips Side Rails Stainless Steel Legs included(removed for transport purposes) For More information EMAIL CALL Kevin at(903) 355-1409
|
|
|
16" x 12' L SS Food Grade Bottle Conveyor - NO Belt
16" x 12' L SS Food Grade Conveyor- NO Belt SS frame 17" wide frame 16" Belt required 12' Long NO Belting- Belting was removed due to wear. SS frame SS Sides 84" elevation SS legs with casters Hydraulic drive Last used in a Vegetable Processing Facility Just removed from production Very Nice Condition! For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
4.5" x 10' L SS Table Top Bottle Conveyor with drive, Bottling Machine
4.5" x 10' L SS Table Top Bottle Conveyor with driv SS frame construction 4.5" plastic Rexnord belt 36" Elevation Adjustable legs On/ Off Switch mounted 1/3 HP/ 1725 RPM drive Side rails can be added for an additional fee Electrical 115/230 Volt/ 60 Hz/ 1 Phase Just removed from Production Very Nice Condition! For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
NEW 120' of 4.5" SS Table Top Bottle Conveyor, (12) 4.5" x 10' Long SS Conveyors
NEW 120' of 4.5" SS Table Top Bottle Conveyor Never installed. MFG New in December 2013(12) NEW 4.5" x 10' Long SS Sections SS Construction Elevation 42" SS Legs with +/ 2" adjustment feature Side rails SS Back with UHMW inset rail UHMW wear strips Adjustable side rails NO BELTING Skidding included NEW. NEVER INSTALLED CONDITION! For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
4.5" x 100' SS Table Top Bottle Conveyor System, drives, curves, etc.
4.5" x 100' SS Table Top Bottle Conveyor System(3) Transfer sections with Drives. 4.5” to 4.5” 100 feet of straight(6) 90^ Curves Rexnord 4.5” Plastic belting SS Legs with floor level adjusters SS Side rails with UHMW insets Adjustable brackets Complete bottle conveyor system Skidding included Excellent Condition! For More Information. Email tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
18” Wide x 10’ Long SS Food Grade Bottle Conveyor
18” x 10’ Long SS Food Grade Bottle Conveyor SS frame construction 18” Rexnord plastic matt top belt SS legs with level adjusters SS side rails and brackets included(removed for shipping purposes) SEW 3/4 HP/ 1700 rpm Drive Electrical 230/460 Volt/ 60 Hz/ 3 Phase Just Removed from a Major Food Plant Excellent condition! For More information. Email CALL Kevin at(903) 355-1409
|
|
|
4.5” Wide x 10’ Long SS Food Grade Bottle Conveyor
4.5” Wide x 10’ Long SS Food Grade Bottle Conveyor SS frame construction 4.5” Rexnord plastic table top belt SS legs with level adjusters Separation wheel for container indexing SEW drive motor Electrical 230/460 Volt/ 60 Hz/ 3 Phase Just Removed from a Major Food Plant Very Good condition! For More information. Email CALL Kevin at(903) 355-1409
|
|
|
(2) 42" SS Rotary Accumulator Tables, Bottle Accumulation, Sorting Conveyor
2) 42" SS Rotary Accumulator Tables. Bottle Accumulation, Sorting Conveyor(2) units available/ Priced Individually Mfg by GDC SS Rotary Table 42" diameter SS construction 36" Elevation with adjustment SS side rail Drive motor Electrical 115 Volt/ 60 hz/ 1 Phase Just removed from a small food plant EXCELLENT CONDITION! For More information. Email CALL Kevin at(903) 355-1409
|
|
|
4” W x 80" Long SS WASHDOWN Bottle Conveyor with speed controller - Excellent
4” W x 80" Long SS WASHDOWN Bottle Conveyor with speed controller- Excellent MFG by BMI SS Frame SS Legs 4" Plastic Intralox Type Belt 36" Elevation 2 drives with(2) Leeson Speed controllers(1) drive is used for product separation. The other is the conveyor drive Electrical 120 Volt/ 60 Hz/ 1 Phase Removed from a Major Food Plant Excellent Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
12" wide x 10' Long SS Bottle Conveyor
12" wide x 10' Long SS Bottle Conveyor SS Frame construction SS Legs(removed for transport) Plstic Blue Belt(grip tite style) 42” elevation SS Legs levelers SEW 1/2 HP Drive/ 1750 RPM Electrical 230/460 Volt/ 60 Hz/ 3 phase Just removed from a Major Food Plant! Very Nice Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
Palace Cap Bottle Elevator Feeder with SS Hopper, 8" Cleated Incline Conveyor
Palace Cap Bottle Elevator Feeder with SS Hopper. 8" Cleated Incline Conveyor SS contact parts 8” wide cleated incline belt SS Hopper– 32” x 30” wide x 32" Deep Hinged access top on hopper 78" discharge height SS discharge chute Adjustable leg levelers 0.5 hp/ 1750 rpm DC Motor Unit was last used for feeding plastic bottles Last used in a small food plant Excellent Condition! For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
4.5” W x 38' Long SS Table Top Bottle Conveyor
4.5” W x 38' Long SS Table Top Bottle Conveyor SS Frame construction Intermediate conveyor frame sections(3) 10' sections(1) 8' section UHMW Wear Strips Belting not included No Legs No drive Skidding and loading included Good Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
4.5” W x 72" Long SS Bottle Conveyor, Table Top Bottling Conveyor
4.5” W x 72" Long SS Bottle Conveyor MFG by BMI SS Frame Base stand with casters for easy mobility Plastic Rexnord Table Top Belting 38" Elevation DC drive Removed from a Food Plant Very Nice Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
4” SS Bottle Conveyor with 90^ Curve, Table Top Bottling Conveyor
4” SS Bottle Conveyor with 90^ Curve SS Construction UHMW wear strips Plastic belting SEW 1/2 hp Eurodrive No legs Skidding and loading included Very Good Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
7.5” x 130” Long SS Bottle Conveyor, Food Conveyor
7.5” x 130” Long SS Bottle Conveyor SS Construction Plastic Matt-Top belt SS Legs Side rails 38” Elevation Electrical disconnect 2 HP/ 1725 rpm Baldor drive Electrical 208/230/460 Volt/ 60 Hz/ 3 Phase Just Removed from a Food Plant Very Good condition! For More information. Email CALL Kevin at(903) 355-1409
|
|
|
7.5” x 80” Long SS Bottle Conveyor, Food Conveyor
7.5” x 80” Long SS Bottle Conveyor SS Construction Plastic Matt-Top belt SS Legs Side rails 38” Elevation 2 HP/ 1725 rpm Baldor drive Electrical 208/230/460 Volt/ 60 Hz/ 3 Phase Just Removed from a Food Plant Very Good condition! For More information. Email CALL Kevin at(903) 355-1409 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-147d00a12cc-0x109-
|
|
|
86 Feet of SS Air Conveyor, Bottle Airveyor, Pneumatic Conveying
86 Feet of SS Air Conveyor. Bottle Airveyor Purchased new in 2008 SS construction Adjustable neck rail guides Runs from 28mm to 38 mm Multiple length sections(2) SS Air Blower Filters– size 30” x 30” x 20” Last running 0.5 Liter and 1.0 Liter water bottles Recently Removed from production Very Good condition! For More information. Email CALL Kevin at(903) 355-1409.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-147d0c93fd3-0x119-
|
|
|
4.5” W x 40' Long SS Table Top Bottle Conveyor
4.5" x 40' Long SS Bottle Conveyor(4) 10' Long intermediate conveyor sections Matching width frames Side rails UHMW wear strips Idle sprocket end No legs Skidding and loading included Good Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
3.25” W x 6' Long SS Bottle Conveyor with Drive and Pneumatic Pusher Bar
3.25” W x 6' Long SS Bottle Conveyor with Drive and Pneumatic Pusher Bar Two(2) Units available- SOLD INDIVIDUALLY SS Construction UHMW wear strips Pneumatic pusher bar mounted for sweeping bottles off conveyor SEW Eurodrive- 1/2 HP/ 2500 rpm Electrical 460 Volt/ 60 Hz/ 3 phase Skidding and loading included Very Good Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
7.5” x 45^ SS Curve Bottle Conveyor, Table Top Bottling Conveyors
7.5” x 45^ SS Curve Bottle Conveyor SS Construction UHMW wear strips Skidding and loading included Very Good Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
15” x 90^ SS Curve Bottle Conveyor, Table Top Bottling Conveyors
15” x 90^ SS Curve Bottle Conveyor SS Construction UHMW wear strips Skidding and loading included Very Good Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
6” x 90^ SS Curve Bottle Conveyor, Table Top Bottling Conveyors
6” x 90^ SS Curve Bottle Conveyor SS Construction UHMW wear strips Skidding and loading included Very Good Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
3.25” x 90^ SS Curve Bottle Conveyor, Table Top Bottling Conveyors
3.25” x 90^ SS Curve Bottle Conveyor SS Construction UHMW wear strips Skidding and loading included Very Good Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
Empty Bottle / Cap Elevator Feeder with SS Hopper, 12" Incline Conveyor
Empty Bottle/ Cap Elevator Feeder with SS Hopper. 12" Incline Conveyor Previous client never installed belting on conveyor NO BELT on Conveyor- 12” wide incline conveyor SS Hopper– 58” x 58” wide x 66" Deep 110" discharge height SS discharge chute Fork pockets mounted on base 0.5 hp/ 1750 rpm SEW Motor Unit was purchased for feeding empty plastic bottles NO Belt on Conveyor Excellent Condition! For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
Farason Empty Bottle / Cap Elevator Feeder with SS Hopper, 18" Incline Conveyor
FARASON INCLINE HOPPER-ELEVATOR WITH CLEATED BELT- Manufacturer: Farason Corporation. Coatesville Pennsylvania- 18 Inch Wide Cleated Belt- Stainless Steel Frame and Bin Construction- 4) Caster Wheels- Discharge Chute Height 56 Inches- See pictures for further detail- Condition: Good Used- Payment by Bank Check. Cash or Paypal only- Payment due within 5 days of auction end- Buyer is responsible for shipping cost and arrangements- We can secure to a pallet for shipping- Shipping from Morris. Connecticut 06763- Inspection or pick up welcome during normal business hours(Monday- Friday)
|
|
|
Hoppman Empty Bottle / Cap Elevator Feeder with SS Hopper, 8" Incline Conveyor
HOPPMANN INCLINE HOPPER-ELEVATOR WITH CLEATED BELT- 8 Inch Wide Cleated Belt- Stainless Steel Bin Construction. Mild Steel Painted Frame- 4) Threaded Leveler Legs- Discharge Chute Height 72 Inches- 2” Cleats 8” on Center- Stainless Steel Hopper measures 30” x 24” x 30” deep- Dayton 90 VDC Drive Motor- Overall Dimensions 32” Wide x 52” Long x 93” High- Condition: Good Used- Payment by Bank Check. Cash or Paypal only- Payment due within 5 days of auction end- Buyer is responsible for shipping cost and arrangements- We can secure to a pallet for shipping(no charge) We can load with a forklift(no charge) Shipping from Morris. Connecticut 06763- Inspection or pick up welcome during normal business hours(Monday- Friday) RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-148c1aeae31-0x10e-
|
|
|
New England Empty Bottle Elevator Feeder w/ SS Hopper, Cleated Incline Conveyor
New England Empty Bottle Elevator Feeder w/ SS Hopper. Cleated Incline Conveyor Model#HE-40 Serial#1-8556 SS construction 18” wide cleated incline Conveyor 4" high cleats on 12" centers SS Hopper– 52” x 52” wide x 36" Deep Lexan covering on conveyor Hinged access top on hopper 66" discharge height Casters(locking) 0.5 hp/ 1700 rpm DC Motor Unit was last used for feeding empty plastic bottles Last used in a Major Pharmaceutical Plant Excellent Condition! For More Information. EMAIL tesales@used-equipment.com CALL Kevin at(903) 355-1409
|
|
|
(2) 4.5” x 30^ SS Curve Bottle Conveyor, Table Top Bottling Conveyors
2) 4.5” x 30^ SS Curve Bottle Conveyors SS Construction UHMW wear strips Skidding and loading included Very Good Condition! For More information. EMail CALL Kevin at(903) 355-1409,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-149f9715e78-0x10c-
|
|
|
Alliance SS Pressureless Combiner Single Filer, Bottle Conveyor
Alliance SS Pressureless Combiner Single Filer Call to discuss full details SS construction SS Legs with SS floor levelers 23” Elevation Power assist side belt Unit consists of the following sections as per drawing: 405A– 4’0” Long with Drive 405B– 4’0” Long with Drive 406A– 7’0” Long with Drive 406B– 7’0” Long with Drive 406C– 7’0” Long with Drive 409– 3.25” discharge conveyor– 7’6” Long 1 lane(infeed) 18” plastic matt top belting 2 lanes of 7.5” plastic matt top belting 8 lanes of 4.5” plastic matt top belting 1 lane(discharge) of 3.25” plastic belting Recently removed from production Very Nice Condition! For More information. EMail tesales@used-equipment.com Call Kevin at(903) 355-1409
|
|
|
Alliance 22' Long SS Pressureless Combiner Single Filer, Bottle Conveyor
Alliance 22’ Long SS Pressureless Single Filer Bottle Conveyor(1) Lane 15” wide Plastic matt top belt(4) Lanes 3.25” Matt top belt Final 3.25” lane includes 3.25” to 3.25” transfer section SS construction 43” Elevation Side rails– adjustable SS Leg levelers Dodge bearings SS downed bottle collection table(2) SEW 1.0 HP Eurodirve with gearbox(1) SEW 1.5 HP Eurodrive with gearbox Electrical 230/460 Volt/ 60 Hz/ 3 Phase Recently removed from production Excellent Condition! For More information. Email tesales@used-equipment.com Call Kevin at(903) 355-1409
|
|
|
3.25” W x 32' Long SS Table Top Bottle Conveyor
3.25” W x 32' Long SS Table Top Bottle Conveyor SS Frame construction Intermediate conveyor frame sections(3) 9' sections(1) 5' section UHMW Wear Strips Belting not included No Legs No drive Skidding and loading included Good Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|
|
15” x 15’ Long SS Bottling Conveyor, Food Grade Conveyor, Bottle, Case Conveying
15” x 15’ Long SS Bottling Conveyor SS construction 15” Plastic Matt Top belting Side rails SS Legs 43" Elevation SEW 2 HP/ 1720 rpm Eurodrive Skidding and loading included Recently removed from production Very Good Condition! For More information. EMail CALL Kevin at(903) 355-1409
|
|