|
GREENLEE 555 SBC 854 855 Conduit Pipe Bender EMT RIDGID IMC 2 SHOES & 1 ROLLER
ATTENTION. NOTE FROM SELLER: THE UNIT IN THE PIC'S IS SOLD. BUT WE HAVE ANOTHER JUST AS NICE. WE WILL BE THE PIC'S SHORTLY. IF YOU BUY BEFORE WE UPDATE THE PIC'S, WE WILL SEND YOU THE UPDATED PICTURES BEFORE WE SHIP THE UNIT(if you request it) AND IF YOU FEEL IT IS NOT AS NICE AS THE ONE IN THESE PIC'S WE WILL CANCEL THE SALE WITH NO NEGATIVE FEEDBACK! SquareTrade © AP6.0 FREE SHIPPING. PALLETIZNG AND IF"BUY-IT-NOW" IS USED! THIS IS WITHIN THE 48 STATES(OR TO SOME PARTS OF CANADA) TO A BUSINESS WITH A DOCK OR FORKLIFT FOR UNLOADING! OR, TO A SHIPPING TERMINAL NEAR YOU! WHEN THE FIRST BID IS PLACED THE BUY-IT-NOW WILL DISAPPEAR AND SO WILL THIS OFFER. SELLER RESERVES THE RIGHT TO REMOVE THIS OFFER AT ANYTIME DURING THE AUCTION. UNLESS SOLD! ALL OTHER AUCTION TERMS APPLY! THIS IS A"USED" Greenlee 555 ... moreSBC Electric(110-120 volt) Conduit Pipe SPEED BENDER in"VERY GOOD" TO"EXCELLANT CONDITION" for 1/2" to 2" Conduit EMT. IMC. RIGID pipe! IT WILL BEND 1/2" 3/4" 1" 1-1/4" 1-1/2" and 2" EMT, IMC, AND RIGID, CONDUIT WITH JUST THE TWO SHOES AND 1 ROLLERS SHOWN IN THE PIC'S! THIS WILL BEND ALL SIZES WITH ONLY TWO SHOE CHANGES! WHAT A TIME SAVER! IT WILL ALSO BEND IN VERTICAL OR HORIZONTAL POSITIONS(just lay the unit on it's back) HOW COOL IS THAT! It works very well. It is smooth and quiet. It has Bend, Jog, Unload, Angle Select up, Angle Select down, Clear! It is also a programmable pendant, for repeat bends and it has a built in tool box under the lid(for manual and remote) This unit is USED and it is in"VERY GOOD" TO"EXCELLENT" condition! This unit has original paint. But has been touched up where needed. This unit has been tested and works perfectly! An instruction manual is also included, so you, or your employees can make quick, exact bends! GET OUT OF THE PAST! YOU CAN SPEND $9000.00+ ON A NEW 555 WITH ALL 5 SHOES AND THE 4 ROLLERS IT TAKES TO BEND EMT. IMC AND RIGID PIPE 1/2'2" THE
|
|
|
Greenlee 882 Bender Pipe Support Roller
Used Greenlee 882 Bender Pipe Support Roller in Good Useable condition. Shipping Quote for the Lower 48.
|
|
|
Greenlee 555 SB Speed Bender 1/2-2" Conduit Pipe w/555SBC Roller Support NO RESV
NO RESERVE! Greenlee 555 SB Speed Bender 1/2"2" Conduit Pipe w/555SBC Roller Support. Serial no. WL-11978-PGF. Capacity: For 1/2" 2" conduit. Electrical: 115V- 11A- 60Hz- 1PH, MACHINE WORKS AND OPERATES GREAT. ALL I HAVE IS WHAT YOU SEE IN THE PICTURES! Includes: No. 555SBC Shoe Group Roller Support, Control pendant, Dimensions& Weight: L 28" x W 30" x H 44" Shipping Weight: 400 lbs. THIS IS A NO RESERVE AUCTION AND WILL SELL TO THE HIGHEST BIDDER! I CAN PALLETIZE AND SHIP THIS ITEM TO YOUR DOOR BY WAY OF FREIGHT TRUCK. IT WEIGHS APPROX. 400 LBS. EMAIL ME YOUR ZIP CODE AND IF IT IS A BUSINESS ADDRESS OR RESIDENTIAL, IF YOU NEED A LIFTGATE TO GET IT OFF OF THE TRUCK OR YOU HAVE A FORKLIFT AND I CAN GET YOU A QUOTE FOR SHIPPING. LOCAL PICK IS FINE ALSO. THANKS AND EMAIL WITH QUESTIONS. Powered by The free ... morelisting tool. List your items fast and easy and manage your active items.
|
|
|
Greenlee 881CT 881 emt/rigid/imc 21/2" to 4" bender ram frame roller
Guaranteed very good condition greenlee 881Ct bender ram. Frame, roller with pins, flat shipping of 250.00 to the lower 48 is hub to hub or a business with a dock or forklift, SERIOUS OFFERS CONSIDERED.
|
|
|
Greenlee 1818 Mechanical Manual Pipe Bender w/ shoes EMT Roller Rigid GREAT!
MST& ASSOCIATES. INC. 800-608-4534 Your Surplus Equipment Specialists. Est. 1996 Petersburg. VA Thank You for your interest in our listed items! We appreciate your business and will gladly answer any questions that may have. Feel free to call or email. Our live operating hours are Monday-Friday 8AM-4PM Eastern Standard Time. MST& Associates has been providing Medical and Surgical equipment all over the world since 1996. We gladly work with customers in the United States and Internationally. If you are looking for something specific. But do not see it in our Ebay auctions, please contact us with a list of what you are looking for. We operate out of 4 large warehouses and have many different items available. Needless to say, we have a bit of everything, and if we do not have what you are looking for, we can certainly try to track it ... moredown for you. ITEM DESCRIPTION: The Item you are bidding on is GREENLEE 1818 MECHANICAL MANUEL PIPE BENDER This item is used. But still in great physical condition. This unit has been tested for basic functions only. No further testing has been/can be done. This item comes as shown in used. Great working condition. Item will have to be crated because of weight and size. Please refer to UPS for shipping quote or for freight quote please contact Eric at NET@ 913) 403-8855 Ext. 104 International shipping is available but is the responsibility of purchaser on their own account. UPS. FedEx or DHL Auction does not include any other cords. Cables, or accessories other than what is listed and pictured above. If you have any questions. Feel free to email or call. PAYMENT: Payment accepted through Paypal. Credit Card, Wire Transfer. Payment must be made 48 Hours after auction ends. If you have a problem with this, contact me BEFORE bidding. If payment has not been received, or no contact has been made, we reserve the right to re-list the item and the purchaser will no longer have the right to purchase the item. Any non-paying eBay member will be placed on the block list, and will no longe
|
|
|
GREENLEE 18681 Cushioned Roller Unit for 1818 Mechanical Conduit Bender
GREENLEE 18681 Cushioned Roller Unit for 1818 Mechanical Conduit Bender Used and in Very Good Condition- no problems whatsoever for use with the 1818 mechanical bender on: 3/4" and 1" EMT. 1/2 through 1-1/4" IMC and 1/2" through 1-1/2" Rigid Save $50+ over new. Exactly as shown. Does not include pin. FAST SHIPPING VIA USPS PRIORITY MAIL We're proud of our positive feedback rating We strive to do it right the first time. Every time We ship FAST! Usually the same day of your cleared payment Questions? We are Greenlee Tool experts and we're here to help you. Call. Message or come visit our full-service professional tool store: Roberts PRO Tools LLC 5959 E Southern Av. Suite 106 Mesa. AZ 85206(480) 600-6921 Our eBay department is open 7 days a week 8am to 7pm MST Top-Quality Brand Name New and Used Tools for the ... morePRO
|
|
|
Greenlee Ridgid Conduit Roller Support # 17979 for 555 bender
Greenlee 17979 Roller Support Unit for rigid conduit. Does have some surface rust as pictured. But in good usable shape. Ready to go on your machine. Check out my feedback and bid with confidence. Thanks for looking and have a great day! electricdealsforyou- 1573 Posted with
|
|
|
Enerpac eject-o-matic bender bending frame and roller
Guaranteed good used condition Enerpac Eject-o-Matic bender frame and rollers. Nothing else, flat shipping of 100.00 to the lower 48 is hub to hub or a business with a dock or forklift.
|
|
|
GREENLEE 782 BENDER FRAME W/ ROLLER AND 3 PINS
THIS IS FOR A VERY NICE EXCELLENT WORKING GREENLEE 782 BENDER FRAME W/ ROLLER AND 3 PINS-39.80 SHIPPING LOWER 48 STATES ONLY PAYPAL PAYMENT
|
|
|
Benner nawman roller sellection chart bender
The bid is for set of ROLLER sellection chart bender for Benner nawman DBD-32X with hydraulic oil. In good conditions, this include 4 rollers size 4,5,3 AND 2. any question e-mail me. WHAT YOU SEE IS WHAT YOU GET winner pay for shipping and handle $25.00 to the lower 48 states. Must pay within 5 days after auction is finished, if you are located in hawaii, canada or alaska please contact me for shipping cost. THANKS FOR LOOKING, PLEASE DON'T BID ON MY ITEMS IF YOU ARE NO SURE TO PAY FOR IT. ANY QUESTION E-MAIL ME thanks and good luck
|
|
|
DIACRO #1 ROLLER 12" PEXTO NIAGARA CLEAN DI- ACRO TUBE BENDER
DI-ACRO DIACRO ROLLER 12" 1 NEEDS SOME REPAIR! THE GEARS ARE A LITTLE WORN BUT COULD BE CLEANED UP. TWO OF THE ROLLS HAVE BEEN MODIFIED A LITTLE. WITH A LITTLE WORK THIS WOULD BE A NICE ROLLER FOR THE PRICE! CHECK MY STORE FOR THESE ITEMS BELOW TAB NOTCHER#2 BENCH PUNCH#1 AND#2 TURRET PUNCH#12 AND#18 FINGER BRAKE 6"12" AND 24" BENCH SHEAR 6" 12" AND 24" ROTERY BENDERS#1.1A, 2, 3 AND#4 LOTS MORE 732-642-8271
|
|
|
Greenlee 1818 Mechanical Manual Pipe Bender w/ shoes EMT Roller Rigid $1499. obo
Greenlee 1818 Mechanical Manual Pipe Bender w/ shoes EMT Roller Rigid $1499.00 or Best Ebay Offer! Please Always Read Entire Description before making an Offer! ITEM DESCRIPTION: This Auction is for a Pre-Owned Dynaric Automatic Box Strapping Machine 220 volts 26" x 43" counter top working area. Model MJB-2, this machine came out of a county store, it wasn't used much, basically sat in storage, great machine that can be used to strap box's, machine was working before it was taken out of storage, but please take a good look at the pictures, because I will be putting 6 pictures so you can see exactly what you will receiving if you win this auction, Please take a good look at all the pictures! Make: Dynaric Model: MJB-2 Motor: Electric 220 volt SHIPPING: Shipping is $500.00 Freight Company to a business. If it is residential ... moredelivery it is $100.00 more for the lift gate and residential delivery Local Pick-up is available we are located in Hollywood. Florida 33021 Sorry. No International Shipping on this Item. PAYMENT: Paypal.com is preferred. I will only ship to your confirmed paypal.com mailing address a1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3Ad%60%3Ea1%3E-14024bad4e2-0x100-
|
|
|
Greenlee 885TE 885T 885 Bender Roller Parts
Greenlee 885TE 885T 885 Bender Roller Parts. Uesd in good condition. What you see is what you'll receive.
|
|
|
Niagra Sheet Metal Roller 37" w/ Niagra 42" Sheet Metal Folder Bender Brake
Niagra Sheet Metal Roller 37" w/ Niagra 42" Sheet Metal Folder Bender Brake Product Description PLEASE READ CAREFULLY! Up for bid is a Niagra Sheet Metal Roller 37"37x7x12) w/ Niagra 42" Sheet Metal Folder Bender Brake(42x14x17) These have been stored for many years and are covered in rust. The brake does turn when the crank is moved. The roller is rusted over and wont budge. The handle for the brake is snapped off but is included with the bid. Please refer to the pictures and bid accordingly. Thanks. Sunnking ships freight out-bound items using a variety of carriers to give you, the customer, the best possible rate. We do NOT allow customers to send their own carriers in for pickup. Please do not ask. Click an Image to Enlarge If you think this is a HOT DEAL check out Sunnking's other items up for auction. Click. ... moreTo add Sunnking to your favorite sellers list. Click. Freight Shipping Information Shipping Weight: 518.00 lbs. The following link will take you to page so that you can get a ROUGH estimate of your Freight shipping charges. Actual rates may vary due to specific buyer requirements. Packing requirements, changes in the freight classification, location or liftgate services. Please. To enter the freight quote website and obtain your rate quote. You may be asked to log in. If you are, the user name is quote and the password is 1234. Once you are on the freight quote page you will need to enter your address, the item classification which should be 92.5 in most cases, the product weight(listed above) under"packaging" select"Pallet" write in a brief description, how many pieces and how many pallets. All required fields are marked with a* Sunnking ships freight out bound items using a variety of carriers to give you. The customer, the best possible rate. We do NOT allow customers to send their own carriers in for pickup. Please do not ask. If you win this auction. Include the following information with your payment: Your contact phone number, Let us know if the item is
|
|
|
HOSSFELD No 2 Bender 2B Half Round Roller & Shoe Assembly 20001
Hossfeld No 2 Bender Die 2B Half-Round Roller& Shoe Assembly Part Number: 20001 Die is in EXCELLENT shape. NO cracks or repairs. THESE ARE GENUINE HOSSFELD DIES! I have a lot of genuine Hossfeld Tooling. If you are looking for something that you do not see please do not hesitate to ask! Visit my Store for all of your sheet metal tooling needs! All Machines- Punch& Die Sets. 732-642-8271:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1414d73363a-0xfc-
|
|
|
Greenlee Ridgid roller 854 855 rigid conduit bender pipe 00936 1/2"-1 1/4"
Item is in good working condition. Greenlee 00936 fits a 555 Bender Roller. Flat rate shipping of $20 to lower 48 via UPS Ground.
|
|
|
EAGLE BAR ROLLER BENDER MODEL BPR CP 20 SOME WHEELS INCLUDED MANUAL METAL FORMER
New Page 1 Welcome to Simple Easy Auctions. the way it should be. EAGLE BAR ROLLER BENDER MODEL BPR CP 20 SOME WHEELS INCLUDED& MANUAL ITALY EC* PLEASE MAKE AN OFFER USE THE BLUE"MAKE OFFER" BUTTON ABOVE NO UNREASONABLE OFFER REFUSED! Cart included if extra shipping is paid or if you can pick up from location zip code 12456 LINK TO MANUFACTURER'S BROCHURE: Description TECHNICAL DATA Shafts diameter mm.20 Rolls diameter mm.86 Drive motor 0.33KW Rolling speed 15 RPM CHARACTERISTICS Mechanical adjustment of upper roll with position monitored by electronic digital display Two driven rolls knurled. For optimal traction Steel frame FE 430B heavily dimensioned Shaft in high strength alloy steel 38NCD4. Heat treated and ground to precision tolerance Gears in special alloy steel with precision ground teeth Standard Rolls in through ... moretreated and hardened steel to 58÷60 HRC Bench top machine with vertical working position with horizontal shafts Approximate weight 60 kgs Machine dimensions: base 320x 600x 440mm height s hip weight is high for this item- so please contact us for a quote Pictures Bid with confidence. Read my feedback.upon writing this description we have well over 1200 all-positive feedback comments! QUESTIONS: Please ask any and all questions(and please: feel free to ask anything at all! prior to bidding. Buying, making an offer or buying-it-now, Just click on the user ID: SimpleEasyAuctions under"Seller Information" at the top and follow the steps to submit a question, be sure to include the listing number with your inquiry. PAYMENT: Full payment must be received within 5 business days of the end of the auction. Unless pre-arranged. Please calculate total cost and include shipping charges as indicated. Please include the item number with your payment. I accept payment made via Pay Pal only. LOCAL PICKUP AND/OR DELIVERIES: Local pickup of items is welcome and saves on shipping. Local delivery is also an option, please email for further details. For motor vehicles see policies b
|
|
|
Multiquip MB-25HD Rebar Bender Roller and Collars
Used Multiquip MB-25HD Rebar Bender Roller and Collars. Comes just how you see it. If you have any questions please ask. Thanks
|
|
|
STEEL ROLLING / ROLLER DIE 1951 METAL & PIPE BENDER TOOL 4 1/2" CV-10 LOT 1
4 1/2" DIAMETER. MARKED CV-10 WE ARE SELLING A STEEL ROLLING/ ROLLER DIE MADE IN 1951(SOME ARE DATED 1951) POSSIBLY USED BY THE AIR FORCE OR FOR AIR FORCE MANUFACTURING(SOME ARE MARKED USA AF) THE CENTER HOLE IS 1 1/4" AND THE KEY IS 1/4" THEY APPEAR TO BE IN GOOD CONDITION. I HAVE HUNDREDS MORE THAT I WILL GET LISTED OVER THE NEXT MONTH.
|
|
|
Horse shoeing, Farrier, equine, Nail Roller Bender, Hoof, vintage
These are a vintage pair of Horseshoeing nail benders. I guess they are called, thats what they do. These are totally metal, no plastic. Work perfect every time by anyone who knows what they are doing in the horse shoe trade. Great gift for the farrier on your list. Vintage set used by a great farrier in his day. Always super fast shipping. These sell for $69.99 at Tractor Supply, just ask George Strait. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-142f9bf2acb-0x100-
|
|
|
Greenlee Ridgid Bender Roller 7lb.
Greenlee Ridgid Bender roller 7lb. Tool has Seen very little use Note: Buying as is: Please check out our photographs to see more detail on any damage. Etc. Please feel free to use the enlargement and zoom features to be sure you get a good overall view of this item. We are not experts, but we do our best to accurately photograph and describe our products. Please ask any questions ahead of time so that we have plenty of time to try to get back to you. We will do our best to answer them accurately.
|
|
|
80 DEGREE PAIR ROLLING / ROLLER DIES 1951 METAL & PIPE BENDER TOOL LOT 50
5 3/8" DIAMETER. THESE ARE BOTH MARKED 80 DEGREES AND IT WELL TOGETHER, MARKED SD-335.612 WE ARE SELLING A STEEL ROLLING/ ROLLER DIE MADE IN 1951(SOME ARE DATED 1951) POSSIBLY USED BY THE AIR FORCE OR FOR AIR FORCE MANUFACTURING(SOME ARE MARKED USA AF) THE CENTER HOLE IS 1 1/4" AND THE KEY IS 1/4" THEY APPEAR TO BE IN GOOD WORKING CONDITION. IF YOU BUY TWO OR MORE OF THESE ROLLER TOOL AUCTIONS. I WILL INCLUDE AND EXTRA ROLLER TOOL AT NO CHARGE.
|
|
|
Vintage Sheet Metal Bead Seam Roller Press Bender
Here we have a vintage metal bender.In good condition.Eith some surface rust& pitting.One lever is tough to turn so i'll leave that to winning bidder,probably needs to be oiled to loosen it but i'm not an expert in tools.estate find that's pretty cool,if you collect vintage/antique tools you pribably don't have one of these,i found one other one that's similar in my research.No mfg name or anything else that i can see stamped or engraved.The other one listed called it an iron sheet metal bead seam roller press bender,wow that's a mouthful.I described it as best as i can.Good luck.
|
|
|
Greenlee Conduit Support Roller For 885 Bender
Greenlee Conduit Support Roller For 885 Bender SPECIFICATION Bullseye Catalog# 42549 Brand: Greenlee, Weight: 10 lbs, CONTACT INFO: Contact us Monday- Friday 6am-3:30pm EST with any questions. Check out our eBay store BULLSEYE INDUSTRIAL SALES BULLSEYE INDUSTRIAL SALES. LLC 221 US Highway 20 Suite B Middlebury. IN 46540 Phone: 1-574-825-4990 Fax: 1-574-825-1280 Email: bullseyeindustrial@gmail.com ABOUT US We are an Industrial Surplus Dealer. Our goal is to provide quality new and used surplus items at a discount price. Your business is important to us. If there is any problem with your purchase or the transaction in any way please let us know at the phone number above. PLEASE READ INSPECTION. All items listed can be viewed in our warehouse by appointment only. Feel free to call and make an appointment if you wish to inspect an item. INDIANA ... moreSALES TAX· All Indiana customers are subject to Indiana State Sales tax of 7% regardless if the item is shipped or picked up unless the buyer provides proper tax exemption forms. SHIPPING· Shipping price is shown for US lower 48 states. Please ask us for shipping quotes on any item you want shipped anywhere else. Need it urgently? Next Day& Second Day Air Services are available. Call us and we will do what we can to get it to you quickly. We ship USPS& UPS. We choose the carrier. If you prefer we can ship using your account. A packaging and handling fee may apply. Items paid for before 12:00 noon(EST) will usually ship out the same business day. Large items that require an LTL shipment generally go out the next business day. Larger items that must be shipped via flatbed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. If an item needs to be shipped by freight courier. The buyer must contact us at 574-825-4990 for a freight quote. COMBINED SHIPPING If you are purchasing multiple items or assorted items and would like combined shipping. Follow these steps: click BUY IT NOW and then click COMMIT TO BUY OR click
|
|
|
Greenlee 555 1-1/2"- 2" Support Roller Rigid Conduit Bender Very Nice
This is a refurbished Greenlee 555 Conduit Roller Support for 1 1/2" and 2" Conduit. It is in very good condition. Please look at pictures. Ships USPS Priority mail to USA.
|
|
|
GREENLEE 782 Bender Roller For One-shot CONDUIT BENDER ES02-28-08
GREENLEE 782 Bender Roller For CONDUIT BENDER ES02-28-08 Sold as is please inspect and bid accordingly. Will ship at cost! Please take a look at our other Items! PAYMENT: Funds must be cleared prior to pick up or delivery arrangement. We are a working company open for business 8-5 Monday through friday Central Standard time. Please feel free to contact us for any specifics or details through ebay or call us@ 210-648-2122.SHIPPING: shipping at cost from San Antonio. TX 78222 to all lower 48 States. combine shipping on multiple items. Please contact us for combined shipping quotes. Feel free to come by or send someone to inspect roller. For help with PayPal please contact us. We accept Visa. MC& Discover Please call with any questions 210-648-2122. Subject to prior sale.All reasonable offer are considered. If you are serious about our equipment. ... moreSome kind of in house financing could be possible. We constantly need trades, always buying Dump Trucks, Bucket Trucks, Trailers, Excavators, Backhoes, Skid Steers, Loader, Graders or any Posted with lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-1449fdf4403-0x10e-
|
|
|
GREENLEE 885T 885 Bender Roller For One-shot CONDUIT BENDER ES02-28-07
GREENLEE 885T 885 Bender Roller For CONDUIT BENDER ES02-28-07 Sold as is please inspect and bid accordingly. Will ship at cost! Please take a look at our other Items! PAYMENT: Funds must be cleared prior to pick up or delivery arrangement. We are a working company open for business 8-5 Monday through friday Central Standard time. Please feel free to contact us for any specifics or details through ebay or call us@ 210-648-2122.SHIPPING: shipping at cost from San Antonio. TX 78222 to all lower 48 States. combine shipping on multiple items. Please contact us for combined shipping quotes. Feel free to come by or send someone to inspect roller. For help with PayPal please contact us. We accept Visa. MC& Discover Please call with any questions 210-648-2122. Subject to prior sale.All reasonable offer are considered. If you are serious about ... moreour equipment. Some kind of in house financing could be possible. We constantly need trades, always buying Dump Trucks, Bucket Trucks, Trailers, Excavators, Backhoes, Skid Steers, Loader, Graders or any Posted with
|
|
|
GISHOLT ROLLER BAR TURNER BENDER 15119D
GISHOLT ROLLER/BAR TURNER/BENDER#15119D HYDRAULIC FEED ADJUSTMENT WITH PARKER HANNIFIN CYLINDER CYLINDER#OF-2AS140 AND#F-74987 MANY PUMPS.MOTORS AND CHUCKS FOR SALE ASK ABOUT BULK BUYING. FURTHER DETAILS ON REQUEST. A PLUS MACHINERY IS LIQUIDATING MACHINE TOOL PARTS ALONG WITH TOOLING AND ELECTRONICS FOR MOST MANUFACTURING EQIPMENT. PLEASE VISIT OUR EBAY LISTINGS FOR THE PARTS YOU NEED AT THE PRICE YOU WANT TO PAY. YOU CAN ALWAYS REACH US AT A PLUS MACHINERY BY CALLING 217-615-7339 OR SEND US AN EMAIL AT SALES@APLUSMACHINERY.COM AND FILL OUT THE EMAIL REQUEST FOR MORE INFORMATION. ALWAYS OPEN YOU WILL ALWAYS BE ABLE TO CONTACT US THROUGH OUR EBAY ACCOUNT. OUR LISTINGS WILL FEATURE THE FOLLOWING MACHINES AND TOOLING MOST OF THE UNITS. WILL ONLY BE LISTED ONCE SO BID EARLY IF YOU WANT THE ITEM. TOOL HOLDERS 40 AND 50 TAPER INSERT MILLING AND ... moreFACE MILLS DRILLS AND TAPS BORING BARS OF ALL SIZES TURRET LATHE TOOLING HYDRAULIC CHUCKS MANUAL CHUCKS ROTARY TABLES AND INDEXERS. MANY MORE ITEMS WILL BE LISTED FOR YOUR INSPECTION AS WITH ALL OF THE ITEMS WE SELL. THE ITEM HAS BEEN TESTED. WAS RUNNING GOOD WHEN REMOVED FROM SERVICE, IS NEW OR IN GOOD CONDITION. WITH OVER 800 LOTS FOR SALE. WE HAVE SOMETHING FOR EVERYONE. IF YOU DON’T SEE WHAT YOU WANT LISTED. SEND US AN EMAIL AND ASK FOR IT. WE PROBABLY HAVE IT AVAILABLE AND WILL LIST AN AUCTION FOR IT. ALL SALES ARE FINAL AND ALL ITEMS ARE SOLD AS IS WHERE IS UNLESS POSTED ON SALE PAGE. LOADING AND STORAGE FEES ARE BILLED SEPERATE AND ARE BASED ON TIME REQUIRED AND EQUIPMENT REQUIRED TO COMPLETE THE JOB. FOR A LOADING FEE. PLEASE CALL OR EMAIL US. PAYPAL ACCEPTED FOR DEPOSIT ONLY. PLEASE PAY FROM OUR INVOICE. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
AMUSEMENT PARK SIX FLAGS OVER GEORGIA GA MIND BENDER ROLLER COASTER
Older card in good condition. Buyer pays $1.25 shipping is U.S. and $2.50 elsewhere. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Ring Stretcher Enlarger with Roller Dies Machine SizerJewelry Tools spoon bender
How to use STEP 1 Attach the ring stretcher to a sturdy surface(screws not included) STEP 2 Turn the chrome plated handle counterclockwise to open. STEP 3 Select a die that best matches the ring shank(half-round. V" or plain) then match the width of the die's groove to the ring. STEP 4 Lift the chrome-plated pin. Place the selected die on top of the black gear(the hole in the die goes over the peg on the gear) then replace the pin. STEP 5 Place the ring to be stretched onto the shaft connected to the base and tighten the handle. STEP 6 Illustration shows back and forth movement. Continue tightening while rotating the handle 360 degrees to stretch a plain band or back and forth for a ring with setting. Use caution when stretching rings with set stones.
|
|
|
Greenlee 32027 1-1/2"Steel Pivot Roller Sleeve 555SBC Genuine Tool Part Bender
Greenlee 32027 1-1/2"Steel Pivot Roller Sleeve 555SBC Genuine Tool Part Bender About Us: We are resellers and buy at a wide range of places including: garage sales. Basements, estate sales, barns, dusty, musty, smoked-in homes, etc. We try to take enough pictures to help in the description because we are no experts in anything we sell. So please look at the all the pictures and the item details. We offer a money back guarantee if you are unhappy for any reason. 100% SATISFIED or your money back! We do our best to describe the items but if you have ANY questions please ask before you bid. Thanks! This is a Used Greenlee 1-1/2" Roller Sleeve Part# 32027 Fits 555SBC and possibly other tools. Please check to make sure this part will work for you before purchase. Item measures 2.25" long X 1" in diameter. Listed as used. But ... moremay also be new with minor surface corrosion. Please check out my other tool and tool parts listings.
|
|
|
Ercolinia CE-40 Roller Bender
ERCOLINIA CE-40 ROLLER BENDER IN EXELLENT CNDITION PRICE NEW: $16.900.00 SPECIFICATIONS: CAPACITY: 2" SCH. 40 PIPE/ 2" ANGLE IRON-NC TOUCH PAD PROGRAMMING-MEMORY(8) PROGRAMS-UNLIMITED BENDING PASSES-HYDRAULIC CENTER ROLL POSITIONING-THREE ROLLS DRIVEN-UNIVERSAL TOOLING AND MANUAL INCLUDED-220V 3 PHASE I reserve the right to end this listing early as it is advertised for sale locally.
|
|
|
Greenlee 1810 Little Kicker Offset Bender for 1/2" EMT, Shaft & Roller Only
Has general signs of normal wear and tear which may include scratches. Scuffs, dirt, sticker residue etc on the exterior casing. PLEASE REFER TO PICTURES. Unit does not come with accessories unless noted in description. Greenlee 1810 Little Kicker Offset Bender for 1/2" EMT Shaft& Roller Only- No Brackets Condition: USED. UNTESTED, Please refer to pictures Estimated Packed Shipping Weight: 5 lbs. Notice Regarding Freight: Please wait for an invoice with shipping charges. Only items pictured are included- If a part is not pictured. Or mentioned above, then it is not included in the sale. For multiple listed items. The pictured serial number is not necessarily the one that will be sent. 14-Day Satisfaction Guarantee(See Details Below) Shipping Notice: Additional shipping charges may apply; pending location. Size and weight of the item(s) ... moreLister: DL Can't find the answer you're looking for? contact us! Business Hours: 8:00 am to 4:00 pm(PST) Monday to Friday We are closed on Weekends and all major US holidays. Warehouse Delivery Hours: Will-Call Hours: 8:00 am to 3:00 pm(PST) Monday to Friday 8:00AM- 12:00PM(PST) 12:30PM- 3:30PM(PST) Monday to Friday. Email Address: Please Use The eBay Messaging Service, Phone: 408-762-7286, Fax: 408-283-9004, Physical/Mailing Address: Prism Electronics Corp. 18305 Sutter Blvd. Morgan Hill. CA 95037 USA Location visits by appointment only. Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within seven days as payment arrangements can be made. We accept: PayPal. All Major Credit Cards Through PayPal. And Bank Wire Transfers in USD(There is a $25 wire transfer fee) Will-Call items must be paid in full by PayPal or cash with exact change on pickup. We cannot process the order until we receive tax from shipping address within California or a copy of your California Resale Certificate A 8.75% Sales Tax applies to all purchases in CALIFORNIA. All items will be securely packaged or palletized and shipped via the best a
|
|
|
Baileigh R-M55H Hydraulic Ring Roll Bender Pyramid Bending Section Pinch Roller
R-M55H Hydraulic Adjust Roll Bender This unit was taken in satisfaction of a judgment by Mostyn Prettyman. PLLC. We are a law firm, not an equipment broker, and we have no use for a tube bender. If you do, then it's your lucky day. This unit was manufactured June 2013 and was purchased in October 2013. There is nothing wrong with this item. It is practically brand new. It was seized from a business that was using it as recently as June 2014. Shipping needs to be arranged by the Buyer. Buyer may have it shipped to wherever it needs to go. But take possession in Rogers, AR. Call Josh@ Toll Free 1-855-464-4529 to arrange shipping from the law office. Click here for capacities and specifications: The R-M55H metal ring roller is a very powerful bender capable of rolling 2" Schedule 40 pipe. Or 2" X 2" 187) angle iron in mild ... moresteel. This model has a power requirement of 220 volts, single phase, so it literally can work in any fabrication shop or on any job site. The R-M55H has a powerful direct gearbox drive system that delivers full torque when bending at full capacity. A Sieman's inverter drive protects this metal ring roller when bending at full load. The inverter drive allows this ring roll to provide variable speeds. A variable speed machine really comes in handy when dealing with different materials. Adjustments to this Benders speed can be made on the fly. Like all Baileigh hydraulic single pinch ring rollers. This machine has a powerful top roll that uses industrial grade hydraulics. The hydraulic top roll works in conjunction with the programmable digital read out. This DRO can be programmed with the final down position and upward stroke which allows for precise repeatability when doing production runs. The R-M55H ring roll comes with a sturdy frame that allows the operator to run the machine in a vertical or horizontal position. This section bender come with a set of segment rolls that allows the operator to bend certain flat materials. As well as some angle iron applications. Additiona
|
|
|
GREENLEE EMT Support Roller for 555 Bender Loc: Jimmy
This is a GREENLEE EMT Roller Support for a 555 Bender. It is used but is in really nice condition. Shipping: $50.00 LOC: Jimmy
|
|
|
Greenlee Bender Roller Support for 1-1/4” to 5” IPS Conduit Pipe 884 885
Greenlee Bender Roller Support for 1-1/4" to 5" IPS Conduit Pipe 884 885 Up for sale we have a Greenlee Bender Roller Support for 1-1/4" to 5" IPS Conduit Pipe 884 885. It is in fairly good shape with some knicks and wear marks. But overall usable condition. The center hole measure 1-1/2" in diameter. Great item on Ebay. $ave now! Please contact me if you have any questions. Important: Please read below if you intend to bid. By placing a bid on this item you agree to the terms of this auction. Shipping Buyer pays for shipping. Increased shipping charges to Hawaii. Alaska, Puerto Rico, and International shipments. Payment Policy Payment must be made within 7 days from the end of the auction. Accept payments through PayPal. Credit cards, or payment upon pick up. International buyers must pay by PayPal only. Bank wire ... moretransfer is also accepted for National and International sales over $1000.00. CA buyers add 9.0% sales tax. Return Policy Returns will be accepted if there was an error in the description. Unless the item is being sold"AS IS" All sales of items that are sold AS IS will be considered Final. Refunds will be provided if item is returned within 30 days of purchase date in the same condition as received unless stated otherwise in the above description. Refunds never include shipping costs unless stated otherwise in the above description. There will be a 20% restocking fee charged for all refunded items. Check out my other great items now!
|
|
|
Hand Operated Tubing Pipe Bender w Round & Square Tube Dies 3/8"-1" Die Roller
Items are used. Case has some dents. Comes with whats in photos. CJ-3018-D9-4. Industrial Hand Pipe Bender with PVC case• This compact pipe bender is suitable for round pipe ranging from 3/8” to 7/8” and square pipe 3/4” 1” Easy and safe; bend a pipe by just pulling the handle• Round Pipe: 3/8" 1/2" 9/16" 5/8" 3/4" 7/8" Square Pipe: 3/4" 1" Pipe Thickness: 22GA? 18GA(0.8- 1.2mm) Max. Bending Angle:180°• This tool consist of a base. Spindle, bending arm, die roller, roller seat, screw and nut Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Greenlee 1-0934 Support Roller 884 885 1 1/4-4" Conduit Bender
Greenlee 1-0934 Support Roller 884 885 1 1/4-4" Conduit Bender Item Description To browse our entire store inventory. ITEM; Greenlee 1 1/4- 4" support roller. Number 1-0914. View large photo's below! Condition: Pre-owned. Moderate signs of use, appears to be in good working order. Shipping& Payment Payments are due within 7 days of auction end. If this is a problem please check with us prior to bidding. Thank you. Calculated by weight and destination Click Images to Enlarge inkfrog terapeak.
|
|
|
GREENLEE EMT 555 Bender Support Roller # 23541 loc jim
This is a GREENLEE Model 23541 EMT Support Roller. This item has been used but it must have been lightly because it is in very nice condition. Shipping: $50.00 LOC: Grange
|
|
|
Small Turner Niagra metal bender bead roller Antique!!!
Offered is another metal bender/beader called a Small Turner by Niagra in excellent condition. Fully functional and smooth operation despite being old and dirty. Again. Low starting bid with reasonable reserve. Thanks for looking and bidding. ec2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3Eec2-147b75f2361-0x10f-
|
|
|
GENUINE DIACRO MACHINE STAND FITS MANY BENDER,ROLLER,SHEAR,BRAKE DI-ACRO
DIACRO STAND 15W X 20L X 33H FACTORY BROWN PAINT. THIS IS PRE DRILLED TO FIT A VARIETY OF DIACRO MACHINES. GOOD CONDITION. 40g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3E40g-147bbcb5378-0x104-
|
|
|
1929 Timken Roller Bearing Co Canton OH-Football Game/Gate Donald Bender Art Ad
Authentic Magazine Advertisement Condition Scale: Good This collectible magazine advertisement is about: 10 1/8" X 13 3/4" 26 X 35 cm) NO Copies ~ NO Reproductions Our ads are hand-picked& carefully removed from their original publications. Vintage magazine advertising is a great way to display your interests& will enhance the theme of any room. Unique environmentally friendly gift idea! Shipped flat in a clear. Protective sleeve with two backers. Removable for immediate framing Shop at our eBay Store We Combine All Orders
|
|
|
IMCAR CPHV-70 Angle Roller / Bender **Reduced Price**
IMCAR CPHV70 Angle Roller/ Bender Model: CPHV70 Eagle Pipe Bending Machine Matr. B304044 3.5kw 220 Volts 1.1 Ton 2 1/2" Angle Roller/ Double Pinch Hydraulics Dual LEDS Extra dies as shown are included. CONTACT US FOR SHIPPING QUOTE! Condition: Removed from working machine shop. Blue Box is not included. Items will be repalletized for shipping. Feel Free To Message Us With Any Questions! Our Reference# D1400033-4 We No Longer Accept Paypal On Any Orders Over $500.00! WWW. BMGSURPLUS Auction Information Auction Sales Policy: Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally biding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction or if payment is not received ... morewithin 5 days, item may be offered to the next highest bidder or relisted at the sellers sole discretion. Shipping Details: All shipping originates from 29059 zip code. Shipment will be either UPS. FedX or USPS. Some larger items will ship via Common Carrier Only. Orders are generally shipped on the day after full payment. Payment Details: Paypal is Preferred Method of Payment Returns: Most items we sell are used. Sold AS IS unless otherwise noted in auction. No Warranty or Returns.
|
|
|
GREENLEE 555 1/2"-1 1/4" w/roller support PIPE BENDER SHOE SET *workgr8* NR
WORKS GREAT* 3 SLOT* THIS IS A GREENLEE 555 PIPE BENDER SHOE SET. IT CAN BEND 1/2" to 1 1/4" RIGID& IMC PIPE. IT COMES WITH THE 3 SLOT ROLLER SUPPORT. BUYER TO PAY $50.00 FOR SHIPPING AND INSURANCE TO LOWER 48 STATES. NO INTERNATIONAL SHIPPING. SEE MY OTHER AUCTIONS FOR OTHER HIGH QUALITY TOOLS* QUESTIONS? 760-419-6809* CALIFORNIA TIME*
|
|
|
Antique Wagon Wheel Tire Roller wheelwright tool iron bender blacksmith anvil
Antiue Wagon Wheel Tire Roller.it bender the metal ring that goes around the outside of a wagon or buggy wheel.it is in great working condition.came from an amish farm that used to make wheels.it is an expensive hard to find tool and has to be over 100 year old.
|
|
|
GREENLEE ELECTRIC BENDER & DIGITAL PENDANT 555DX, INCLUDES SHOE 5000571 & ROLLER
GREENLEE 555DX ELECTRIC BENDER W/ DIGITAL PENDANT. SQUEEZE ADJUSABLE FOR 1-1/2" OR 2" EMT OR IMC. GREENLEE MOTOR- SRF3648-3898-7-56C 120V. 7.7A, 1HP, 1750 RPM, AMBIENT-15/40, 746W INCLUDES: BENDING SHOE#5000571& SUPPPORT ROLLER. PENDANT BUTTON: BEND. UNLOAD, JOG! VERY NICE CONDITION.LIKE NEW! PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING SHIPPING: All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charge to shipping. RETURN POLICY: WE WILL REFUND YOUR MONEY IF ... moreTHE ITEM YOU RECEIVE DOES NOT WORK AT ALL UNLESS IT WAS LISTED AS BEING PARTS ONLY OR NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ALL RETURN SHIPPING FEES. AFTER SELLER AGREES TO SENDING THE ITEM BACK AND THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE A REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Approximate weight: 574 lbs. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities Be sure to add us to your favorites list and check out our other items. LSO/13/WC CONTAINER/ 1) WC
|
|
|
Greenlee Model 25273 1/2" - 2" Roller Support For 555 Bender
Greenlee Model 25273 1/2" 2" Roller Support For 555 Bender Condition: used we are selling multiple units and the picture you see may not be the one you get Items are showing minimal signs of noamal usage& storage. ACTUAL ITEMS ARE SHOWING IN PICTURES. 100% Customer satisfaction! We gladly accept PayPAL and payment on pickup. If you have other Payment needs. Please contact us and IF YOU HAVE ANY QUESTIONS PLEASE FEE L FREE TO Call us@ 248-521-7777 thank Please allow 4-6 days for shipping and handling. Thank you.
|
|
|
Gardner Bender cyclone CU295900k roller assembly
Never used but was left in the weather but still completely functional.Was $600.00 new
|
|
|
Greenlee Electric 555 EMT Roller Support Pipe Bender 1.5 to 2" EMT Conduit VG
This is a Greenlee 555 EMT Roller Bending Support. Model 5023541. Works for 1 1/2" and 2" EMT Conduit. It has been disassembled. Cleaned and repainted. Very good condition. Rollers all turn freely and easily. I will also include a setup template pictured for accurately adjusting the height of these rollers on your machine. Ships UPS ground unless otherwise requested.
|
|
|
RX-357, GREENLEE 883 HYDRAULIC PIPE BENDER, 5010924 3" SHOE, AND ROLLER
GREENLEE 883 HYDRAULIC PIPE BENDER. 5010924 3" SHOE, AND ROLLER. Specifications Brand: GREENLEE, Condition: USED. AS-IS" Model: 883/ 5010924/ PWSK4, Serial: Spec: Power Rating: 1/2 TO 3 SLOTS ON BENDER, Weight: 118 LBS. Category: PIPE BENDERS, ERC# RX-357, Location: W-6 BOTTOM, Additional Notes: ALL ITEMS SEEN IN PICTURES COME WITH LOT, Payment Shipping All items are shipped out United Parcel Service(UPS) Price is based upon weight and location. We can ship to a PO Box. With US Postal Rates applying. To determine shipping charges there is a UPS Ground Shipping Calculator attached to our auctions. ERC can ship UPS to Canada and any other International location with the buyer being responsible for all customs and International fees applying. Items over UPS weight and size restrictions will be sent via common carrier. The customer ... moreis responsible for the freight charge. Unloading of the freight and/or picking up freight at terminal if possible. ERC will work with customer in trying to find the most cost effective way of shipping. ERC does not setup shipping via common carrier Internationally. However, we will load your item via common carrier international with you, as a buyer, setting up shipping. The buyer is responsible for any damages to the item once the item leaves our warehouse. All of our items are packaged in new boxes and are prepared for any conditions the shipping company offers. If you would like a special request for our packaging department. Please let us know so we can fulfill your request. If you need a shipping quote. Please send us a message asking for a shipping quote with the item it pertains to. We will need your destination zip code. If you would like to setup your own shipping or receive your own quote, our zip code is 44094. Customer Service We pride ourselves on being a leader in customer service. For a better understanding of the product. Please use pictures for best assurance of your buy. We are not responsible for technical specifications or fitment of an item. Items tha
|
|
|
GREENLEE 555 Roller Support Arm 1/2" - 2" EMT Conduit Pipe Bender Machine Shoe
GREENLEE 555 Roller Support Arm 1/2" 2" EMT Conduit Pipe Bender Machine Shoe Used in Excellent Working Condition Please Look at pictures for a better view of its Cosmetic Condition. Ready to Ship
|
|
|
Current Greenlee 555 40 mil PVC coated bender shoe roller 1/2" through 1 1/4"
Guaranteed good working condition Current 40 MIL PVC coated roller for 555 bender series. Does 1/2" through 1 1/4" PVC coated GRC conduit, flat shipping of $25.00 to the lower 48, serious offers considered.
|
|
|
Pexto 8911 Table Mount (Hand Crank) Crimper; Bead Roller; Steel Bender; Former
Pexto 8911 Table Mount(Hand Crank) Crimper; Bead Roller; Steel Bender; Former SHIPPING NOTE: We offer several shipping options. Including FedEx Overnight. To see your different options, please click on the"Shipping and Payments" tab. This listing is for a table mount(hand crank) crimper; bead roller; steel bender; former. Make: Pexto Model/ Part# 8911 Description: Table Mount(Hand Crank) Crimper; Bead Roller; Steel Bender; Former; used but in good condition. Includes all/only items pictured. Testing: We don't have the resources necessary to thoroughly test everything. We do test items the best that we can though and try to describe them as honestly and accurately as we can. Here is what I am able to tell you about this item: Has not been tested but rolls when cranked and appears to be in good condition. Cosmetic Condition: Shows ... moreno signs of major wear. Please note that we(Kellan Inc) are a commercial and industrial surplus product dealer. We acquire our products from company closures. Obsolete systems, government surplus, overstock, etc. Unless otherwise indicated, all products include our 14-day warranty. However, most products do not include a"manufacturer's warranty" Products are tested to the best of our abilities. This can include a power-up test. Navigating menus, performing simple operational tests, etc. We do not always have the resources and/or abilities to fully test each item we sell. However, we do guarantee and warranty all of our products(unless otherwise advertised"as is" broken" etc. Our standard guarantee/warranty period is 14 days. This period begins on the delivery date. This gives the customer enough time to receive, inspect, and test the product- to make sure the product is satisfactory. If there are any issues, please contact us. We present our surplus products as accurately as possible. Please note that our products only include the pictured items. If an item is not in the picture(i.e. a power adapter. Electrode, original packaging, etc. it is like
|
|
|
GREENLEE 555 IMC 1 1/2" & 2" w/roller support PIPE BENDER SHOE SET *workgr8* NR
WORK GREAT* THIS IS A GREENLEE 555 IMC SHOE GROUP. IT COMES WITH THE GREENLEE 2" 1 1/2" IMC SHOES, AND THE GREENLEE ROLLER SUPPORT. BUYER TO PAY $150.00 FOR SHIPPING AND INSURANCE TO LOWER 48 STATES. NO INTERNATIONAL SHIPPING. SEE MY OTHER AUCTIONS FOR OTHER HIGH QUALITY TOOLS* QUESTIONS? 760-419-6809* CALIFORNIA TIME*
|
|
|
Vintage Jewelry Jewelers Ring Bender Roller Stretcher Tool made In Japan
You are looking at a used but in great working order jewelers ring bender roller stretcher tool made in Japan. The unit has some grinding on the front as seen in the pictures. This doesn't effect it working order. So look at the pictures and buy with confidence! Thanks Dave!
|
|
|
VGT Horse shoeing Farrier equine Nail Roller Bender vintage WELLOCK MEADVILLE PA
From Estate Vintage needs some cleaning signed on both sides welloct meadville PA PLEASE SEE PICTURES THANKS WILL SHIP WITH DELIVERY CONFIRMATION THANKS KAREN approx 7"1/2 inches
|
|
|
CASCADE Stained Art Glass CAME BENDER Zinc, Brass and Copper BENDING ROLLER TOOL
This tool is in very good used condition- save $$$ over the cost of brand new! NOTE: It will be partially disassembled when boxed. And will be easily reassembled. BUY IT NOW for $99.95 + choice of shipping! The original bender as shown will be guaranteed for 30 days. After this period. The item will be considered to be exactly as described, and the sale is then final. Returns may be subject to a 15% restocking fee. NO PARTIAL REFUNDS.
|
|
|
GREENLEE 555 PIPE BENDER w/IMC 1 1/2" & 2" SHOES & roller support *workgr8* NR
WORKS GREAT* THIS IS A GREENLEE 555 PIPE BENDER. IT COMES WITH THE GREENLEE 2" 1 1/2" IMC SHOES, AND THE GREENLEE ROLLER SUPPORT. BUYER TO PAY $250.00 FOR FREIGHT TRUCK SHIPPING TO A BUSINESS ADDRESS WITH A FREIGHT DOCK, A FORKLIFT, OR TO A FREIGHT DOCK CLOSE TO YOU. NO INTERNATIONAL SHIPPING. SEE MY OTHER AUCTIONS FOR OTHER HIGH QUALITY TOOLS* QUESTIONS? 760-419-6809* CALIFORNIA TIME*
|
|
|
GREENLEE 555 RIGID PIPE BENDER SHOE 1 1/2" to 2" w/roller support *xxxcond* NR
EXCELLENT CONDITION* THIS IS A GREENLEE 555 PIPE BENDER SHOE. IT CAN BEND 1 1/2" to 2" PIPE. IT ALSO COMES WITH THE GREENLEE ROLLER SUPPORT. BUYER TO PAY $50.00 FOR SHIPPING AND INSURANCE TO LOWER 48 STATES. NO INTERNATIONAL SHIPPING. SEE MY OTHER AUCTIONS FOR OTHER HIGH QUALITY TOOLS* QUESTIONS? 760-419-6809* CALIFORNIA TIME*
|
|
|
GREENLEE 555 PVC PIPE BENDER SHOE 1/2" to 1 1/4" w/roller support *gr8cond* NR
GREAT CONDITION* THIS IS A GREENLEE 555 PVC PIPE BENDER SHOE. IT CAN BEND 1/2" to 1 1/4" PVC COATED PIPE. BUYER TO PAY $50.00 FOR SHIPPING AND INSURANCE TO LOWER 48 STATES. NO INTERNATIONAL SHIPPING. SEE MY OTHER AUCTIONS FOR OTHER HIGH QUALITY TOOLS* QUESTIONS? 760-419-6809* CALIFORNIA TIME*
|
|
|
GREENLEE MODEL 885T 885TE CONDUIT PIPE BENDER ROLLER SUPPORT
YOU ARE BUYING A USED BUT IN GOOD CONDITION GREENLEE MODEL 885T 885TE EMT CONDUIT PIPE BENDER ROLLER SUPPORT. THIS UNIT WILL COME AS PICTURED. SHIPPING WILL BE FREE TO THE LOWER 48 STATES ABR
|
|
|
GREENLEE 17984 PIPE BENDER ROLLER SUPPORT 1 1/2"-2" RIGID PIPE *gr8cond* NR
GREAT CONDITION* THIS IS A GREENLEE 17984 PIPE BENDER ROLLER SUPPORT. IT CAN BEND 1 1/2" to 2" RIGID PIPE. IT WORKS WITH YOUR GREENLEE 555 PIPE BENDER. BUYER TO PAY $15.00 FOR SHIPPING AND INSURANCE TO LOWER 48 STATES. NO INTERNATIONAL SHIPPING. SEE MY OTHER AUCTIONS FOR OTHER HIGH QUALITY TOOLS* QUESTIONS? 760-419-6809* CALIFORNIA TIME* RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-14a3c2328a5-0x105-
|
|
|
PEXTO 8911, ROPER WHITNEY 622LR,CRIMPER BEAD ROLLER; STEEL BENDER; FORMER
You are bidding on a used TABLE MOUNT. HAND CRANK, PEXTO 8911, ROPER WHITNEY 622LR, CRIMPER BEAD ROLLER; STEEL BENDER; FORMER. As you can tell from the pictures, this unit has very little use(a little dusty from sitting) You will get everything pictured. Check out my other auctions- I have a little of EVERYTHING! On Multiple purchases. Wait to pay until I can send you an updated invoice with combined shipping! I would rather you Buy more stuff and pay less shipping! MY STORY: One Mans Junk is just that! I set this ebay page up to be able to sell of many of the items that I've accumulated over the years. I guess you could say that I'm a little bit of a pack rat. But now it is time to start selling it all off. I list all the information that I can for each item and answer all questions in a timely manner. Make sure you take a look at ... moreall my auctions as they will be changing weekly. Also. Save me as one of your favorites so that you don't miss out! My auctions will range from just about anything a man(or woman) could want, but I'll guarantee that you won't find any cook books for sale here! SHIPPING: I try to use USPS flat rate shipping boxes as much as I can to help save a few dollars and keep the shipping costs reasonable for all. If the items are too large to fit in a flat rate box. I will use USPS parcel post. In these cases I set a flat shipping cost up front and hopefully it is fair for both of us. I will not come back to you and ask for more shipping and I don't use the worthless shipping calculator that ebay offers(I find it to be off and does not favor the buyer at all) FEEDBACK: Please leave positive feedback. As I always do! If you happen to have a problem, please communicate. Nothing worse than selling something and have no idea that a person is having a problem. In almost all cases, I'd be happy to refund your money or work out some other reasonable remedy.
|
|
|
HOSSFELD No 2 Bender 9B flat surface roller P/N 20049 universal hand used??
HOSSFELD No. 2 universal bender 9B flat surface roller. P/N 20049; Approx dimensions 4-1/2" long x 1-3/4" OD x 3/4" ID. Not sure if it's used or not, excellent condition. Please Note: these part numbers(9B/20049)came from the catalog, Hossfeld does not put part numbers on a lot of their items which are not castings; I am listing more Hossfeld in other auctions, will combine shipping where possible. Questions welcomed, thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-14a63b5a055-0x111-
|
|
|
Greenlee 555 EMT Roller Support Arm 1.5"-2" Conduit Pipe Bender Machine
Here we have a Greenlee 555 EMT support roller. With questions call Alex at 908-400-0894. Please check out our other listings for more Greenlee and Ridgid equipment.
|
|
|
Vintage Vigor Jewelry Jewelers Ring Bender Roller Stretcher Tool made In Japan
You are looking at a used but in excellent shape and working order Vigor jewelers ring bender roller stretcher tool made in Japan model RN-515. This unit comes with only what you see in the pictures. So look at the pictures and buy with confidence! Thanks Dave!
|
|
|
Greenlee 3X Roller Support For 555 Bender, 3/4" or 1" ??? See Listing #3372
Greenlee 555 Roller Support for bending 3X same pipes. Believe it is for 3/4" But may be 1" Waiting for better info, will update if I know for sure. In the meantime, please use the dimensions to compare to your bender/shoe and make your own determination. This piece is in great condition, straight and sound; ready to work for you. All of my items are covered by my"Golden Rule" return policy: Do unto others as you would have them do unto you. In the unlikely event that you have a problem with your order, I ask that you call me at 231.753.6185 instead of opening an Ebay case. I will work with you to find a solution or you can simply return the item. Be sure to add me to your! Check out my! Check out my feedback and bid with confidence. Thanks for looking and have a great day! electricdealsforyou# 3372
|
|
|
Greenlee 17979 1/2" To 1-1/4" Rigid Roller Support For 555 Bender FREE SHIPPING
The item you are purchasing is a Greenlee 17979 1/2" To 1-1/4" Rigid Roller Support For 555 Bender. This item ships as pictured. Free shipping to the lower 48 states only.
|
|
|
Sheet metal bender rotary bench mount Niagra No. 189 industrial roller steampunk
You are bidding on: Sheet metal bender rotary bench mount Niagra No. 189 industrial roller steampunk. Thanks for looking and God bless. If there is a problem please contact me through eBay message system or by phone 814 258 7788 so we can resolve the issue before you leave feedback. Please don’t email us our email address is only for payments made with pay-pal. Most problems can be resolved with good communication. CUSTOMER SATISFACTION IS OUR TOP PRIORITY. Please remember when leaving feedback on shipping time, its how long I took to process your order, you are not rating the Post Office on how long it took to get to you, please keep that in mind. Bid with confidence, as we are an E-Bay Square Trade Member and an old-fashioned Mom& Pop store with customer satisfaction as our top priority. Check out our E-Bay store(babyonebaby1)for more ... moreneat stuff. Specialize in the M151 military truck, FRANK'S SURPLUS, INC. since 1979) 814)258-7788 Tue.Fri. 9-5 EST. LOOK TAKE NOTE: If you use pay-pal we will only ship to the pay-pal registered/ confirmed address* GOD BLESS THE WORLD and HAPPY BIDDING. PLEASE if you need help-DO IT THE OLD-FASHIONED WAY, JUST GIVE US A CALL, WE STILL LIKE CALLS. WE ALWAYS COMBINE TO SAVE YOU $ ON SHIPPING. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Greenlee 882 Bender Roller Unit 503 8778.2
Roller Unit. Part No. 503 8778.2 for Greenlee 882 Hydraulic Bender in excellent used condition. Attention USA Customers! If the shipping calculator doesn’t work. Please contact for the sipping cost. Thank you.
|
|
|
Pexto Bead Roller Sheet Metal Forming Tool Former Steel Bender
Peck Stow& Wilcox Co. roller. Your getting it in as found condition. What you see in the pictures is everything I have for it. This is a older unit but still functional. Gears are good. Doesn't look like it has any serious issues. It is rusty but still rolls smoothly. Maybe shipped disassembled. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14b340973a1-0x10e-
|
|
|
EZ- 4P ½" To 4" "Powerdrive" PVC Pipe Bender with Roller -Like Greenlee 851-
This unit is similar to the Greenlee 851 but with the added bonus of the power roller making for more even heating In like new condition. Hardly used Tested and all functions work roller stand missing 1 wheel(easy to fabricate a new set) EZ- 4P· ½" To 4" Powerdrive" PVC Pipe Bender with an ARS-46 Adjustable Roller Stand 2400 WATTS. 120 V AC, 20 AMP The EZ-4P offers all the features of the EZ-4. With the"Powerdrive" advantage of motor-driven rollers, for automatic conduit rotation. All our EZ BEND® PVC Benders take about 90 seconds to reach full operating temperature and each ½" diameter takes about 30 seconds to reach proper forming temperature(Example: ½" conduit takes about 30 seconds; 1 ½" conduit takes about 90 seconds. The Adjustable Roller Stand. ARS-46, is included ... morewith the EZ-4P and EZ-6P for hands-free operation of these units.
|
|
|
Hossfeld #1 bender bending 9 9A roller block pro bend hy bend tooling
Hossfeld manufacturing#9 or 9A roller block for use with a Hossfeld#1 bending unit. American bender or other similar benders that use a 5/8" hole/pin arrangement. This was included with my#2 and won't fit it so I'm listing it here for someone who can. It has some light scratches on the inner diameter from previous usage but is straight and useable. I've sandblasted it to clean metal. Free shipping to lower 48, thanks for bidding, check my other auctions for more Hossfeld#1 tooling!
|
|
|
Hendley & Witemore Angle Roller/Bender 20B
This listing is for a Hendley& Whittemore Angle Roller. 3" x 3" x 3/8" capacity. In good shape. Well maintained, under power in our shop. Can see it operate. We don't use it much anymore Capacities: Angles-Leg out 3x3x3/8 24" I.D. Leg in- 2 1/2x 2 1/2x 3/8 30" I. D. Flat bars-On flat 6x1 to 24" min. dia. On edge-3x5/8 to 36" min. dia. Dia. Angle Rolls- 11" FPM Angle Rolls-4-Speed Drive: 55, 41, 27.5, and 13 FPM, HP Required- 10, Floor Space- 74"x48" Ship. Wt. Lbs-6000 I am cleaning out storage containers and selling surplus equipment that we no longer use. Most of my listings are items acquired during 30 years of operations. Check out our other items- http:www.ebay.com/sch/clarkweld/m.html The Buyer is responsible for all shipping and handling arrangements or local pickup of this item. ... moreWe're a commercial address with a forklift and loading dock and we will load this item for the buyer or the shipper of their choice. Use freightquote.com for shipping rates from zip code 27052. Please feel free to contact Steve Clark at 336-595-9353 or through Ebay with any questions about this item. Thanks for L@king
|
|
|
Pexto Sheet Metal Forming Tool Bead Roller Rotary Bender
Older Pexto forming tool. Your getting it in as found condition. Gears are all good& rotates smoothly. Clamping screw is striped. There is a older weld repair job on top. The weld repair is not that great& looks like it's cracking. Dies can be removed. Maybe shipped partly disassembled.
|
|
|
GREENLEE 17979 ROLLER SUPPORT 1/2, 3/4, 1, & 1.25 INCH RIGID CONDUIT 555 BENDER
GREENLEE 17979 ROLLER SUPPORT 1/2. 3/4, 1, 1.25 INCH RIGID CONDUIT 555 BENDER, Click to View Image Album Click to View Image Album Click to View Image Album Up for your consideration is a pre-owned Greenlee 17979 Roller Support for the Greenlee 555 or Current tools benders. This support has seen a lot of use and still works just as intended. Please see the pictures as they tell the story best. It supports rigid 1/2" 3/4" 1" 1.25" conduits when bending. Shipping cost will be $15.00 to a residence or business anywhere in the Lower Continental USA. I ship World Wide just email for cost quote before bidding. Local Pickup is always welcome and eliminates all shipping cost. In case I've missed something please take the time to look at all of the pictures as they tell the story best. Thank you for looking! Please Read To ... moreavoid any possibility of disappointment. Please email with any questions regarding item. Send us your zip code for shipping estimate. HIGH BIDDER PAYS ALL SHIPPING COSTS U SP S on smaller items or FED EX on heavier items as they are usually the lowest price per pound and insurance and tracking is included in the FED EX rate. TERMS OF SALE. Buyer must contact us with shipping address within 48 HOURS of close of auction. Make payment within 10 DAYS of auction close. Non-compliance with these terms will void the auction. We accept. PAYPAL INTERNATIONAL BIDS ACCEPTED WITH PAYPAL PAYMENT ONLY Payment I accept the following forms of payment: PayPal FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. FREE scheduling. Supersized images and templates. Get Vendio Sales Manager. Over 100.000,000 served. Get FREE counters from Vendio today!
|
|
|
Greenlee 555 Bender Die Shoe Set 2" EMT, 1 1/2" EMT, and Roller Support Arm
This listing is for 2 Greenlee Bender die shoes and 1 roller support. Fits 555 benders For 1 1/2" and 2" Model 5023499 Model 5023505 Model 502 6329.3 Bends EMT Conduit This listing is for three pieces. They show minor wear and are in good working condition. Note pieces will ship in two separate packages. Please ask any questions. We would be happy to help. Freight shipments are available on large orders. Local pick up is also always welcome. Item is sold with a 14 day return policy. Buyer pays return shipping. If you have any questions we would be happy to help. Payment is expected within 5 days of completed listings. Item will ship within 3 business days of received payment. Check out my! Thanks for looking.
|
|